Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Mds Scrubber

    Uploaded by

    Yosses Sang Nahkoda
    This document is a data sheet for a scrubber vessel providing design specifications. It lists codes and standards, design parameters like pressure and temperature, materials of construction, and inspection requirements. It also notes that supports, internals, and protective coatings will be included and specifies standards like ASME for flanges and welding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mds Scrubber

    Uploaded by

    Yosses Sang Nahkoda
    21 views1 page
    This document is a data sheet for a scrubber vessel providing design specifications. It lists codes and standards, design parameters like pressure and temperature, materials of construction, and inspection requirements. It also notes that supports, internals, and protective coatings will be included and specifies standards like ASME for flanges and welding.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a data sheet for a scrubber vessel providing design specifications. It lists codes and standards, design parameters like pressure and temperature, materials of construction, and inspection requirements. It also notes that supports, internals, and protective coatings will be included and specifies standards like ASME for flanges and welding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    Mds Scrubber

    Uploaded by

    Yosses Sang Nahkoda
    This document is a data sheet for a scrubber vessel providing design specifications. It lists codes and standards, design parameters like pressure and temperature, materials of construction, and inspection requirements. It also notes that supports, internals, and protective coatings will be included and specifies standards like ASME for flanges and welding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Job No :

    Doc. No. :
    DATA SHEET SCRUBBER Date :
    Rev :

    Rev. 1 ITEM NO.


    2 SERVICE
    3 NO. REQUIRED
    4 DESIGN DATA SITE CONDITION
    5 DESIGN CODE ASME VIII Div. 1 Latest Ed. AMBIENT PRESS. (MIN/MAX) kg/cm2G
    6 SPECIFICATION AMBIENT TEMP. (MIN/MAX) °C
    7 ASME CODE STAMP YES NO RELATIVE HUMIDITY (MIN/MAX) %
    8 VESSEL ORIENTATION VERTICAL WIND SPEED km/h
    9 DESIGN PRESSURE kg/cm2G SEISMIC DESIGN CODE ASCE-7, 2010
    10 DESIGN TEMPERATURE °C SS g
    11 OPERATING PRESSURE kg/cm2G S1 g
    12 OPERATING TEMPERATURE °C CLASS / SUG E/2
    13 JOINT EFFICIENCY ALTITUDE m
    14 SHELL WINTERIZATION
    15 HEAD TROPICALIZATION YES
    16 CORROSION ALLOWANCE mm MATERIAL OF CONSTRUCTION (MOC)
    17 HEAD TYPE SHELL / HEAD SA 516 Gr 70
    18 SUPPORT LEG REINFORCING PAD SA 516 Gr 70
    19 SUPPORT HEIGHT [NOTE 1] m NOZZLE NECK / PIPE SA 106 Gr.B
    20 INTERNAL DIAMETER mm FLANGES SA 105
    21 LENGTH T/T mm PIPE FITTINGS SA 234 Gr. WPB
    22 FLOWRATE (VAPOR/LIQUID) kg/hr kg/hr SKIRT SUPPORT SA 516 Gr 70 / SA 36
    23 DENSITY (VAPOR/LIQUID) kg/m3 kg/m3 BASE RING PLATE SA 516 Gr 70 / SA 36
    24 VISCOSITY (VAPOR/LIQUID) Cp Cp EXTERNAL ATTACHMENT SA 516 Gr 70
    25 SHELL THICKNESS mm INTERNAL REMOVABLE SA 240 Gr. 304
    26 HEAD THICKNESS mm GASKETS NON ASBESTOS
    27 INTERNAL
    28 ACCESSORIES BOLTS SA 193-B8
    29 INTERNAL LADDERS YES NO NUTS SA 194-B8
    30 LADDERS CLIPS YES NO EXTERNAL
    31 PIPE SUPPORT CLIPS YES NO BOLTS SA 193-B7
    32 INSULATION SUPPORT YES NO NUTS SA 194-2H
    33 LIFTING LUGS YES NO LIFTING LUGS / TAILING LUGS SA 516 Gr.70
    34 EARTHING LUGS YES NO EARTHING LUGS SA 240 Gr. 304
    35 SLIDING PLATE YES NO NAMEPLATE SA 240 Gr. 304
    36 FIREPROOFING CLIPS YES NO ANCHOR BOLTS SA 307 Gr. B
    37 LADDERS WITH CAGE YES NO STIFFENER RINGS N/A
    38 ANCHOR BOLTS & NUTS YES NO DEMISTER SS 316
    39
    40 FABRICATION & INSPECTION PROTECTIVE COATING DATA
    41 INSPECTION / CERTIFYING YES INSULATION NO
    42 PWHT NO FIRE PROOFING NO
    43 HYDROTEST 1.5 x OPERATING PRESSURE PAINTING [NOTE 4]
    44 2 hours holding time period INTERNAL NO
    45 NON DESTRUCTIVE TEST EXTERNAL YES
    46 RADIOGRAPHY SPOT WEIGHT [NOTE 6]
    47 ULTRASONIC AS PER CODE / SPEC EMPTY kg
    48 MAGNETIC PARTICLE AS PER CODE / SPEC OPERATING kg
    49 DYE PENETRANT YES HYDROTEST kg
    50 IMPACT TEST NO
    51 MIGAS CERTIFICATE NO
    52 NOTES
    53 1. Vendor to advice
    54 2. Loads indicated do not include any overdesign. A 10% margin has been considered for vessel design
    55 3. Vessel and Internal shall be designed to handle the specified process fluid flow rates as defined in the process data sheet.
    56 4. Painting shall be as per GGCP-00L8-GS-007-PP "General Procedure for Painting"
    57 5. Deleted
    58 6. Vendor to estimated the calculated for overall weight of the vessel with internals and accessories installed.
    59 7. All nozzle flanges shall be as per ASME B16.5
    60

    You might also like