PBN 600 Questionnary 2022

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

ATR FMS 220

PBN questionnaire

1) What is correct assertion about RNAV and RNP areas ?

- A) SID , AIRWAYS , STAR , APCH to FAF can be RNAV 1


- B) SID , AIRWAYS , STAR , APCH can be RNP
- C) RNP area need to be monitored by RAIM.
- D) all answers are correct.

2) How many satellites are needed ?

- A) 3 to compute a position, 4 for RAIM, 5 to synchronise clock.


- B) 4 to compute a position, 5 to synchronise clock, and 6 for RAIM.
- C) 3 to compute position, 4 to synchronise clock, 5 for RAIM , 6 for FDE.
- D) only 1 is necessary for all functions.

3) Which constellations are used by FMS 220 receiver ?

- A) GLONASS and SDCM


- B) NAVSTAR and WAAS
- C) GALILEO and EGNOS.
- D) NAVSTAR and any SBAS system

4) What is TSO of FMS220

- A) TSO 129
- B) TSO 145
- C) TSO 146
- D) TSO 147

5) What are HAL values ?

- A) 2NM en route.
- B) 1NM TERMINAL area
- C) 0.3 NM for APCH.
- D) All answers are correct.

6) to perform a correct PRAIM what are data inputs.

- A) GPS U/S, VOR U/S, TO time, RNAV/RNP area.


- B) GPS U/S, VOR U/S , RNAV/RNP area
- C) GPS U/S
- D) It is automatic process no need inputs
7) RNAV/ RNP 1 can be flown by which NAV mode.

- A) GPS, D-D, V-D, V-V, DR.


- B) GPS, D-D, V-D, V-V.
- C) GPS, D-D, V-D.
- D) GPS, D-D.

8) What kind of approaches can be performed by FMS220 equipped.

- A) LNAV, LNAV-VNAV, LPV.


- B) LNAV, LNAV-VNAV.
- C) LNAV 2D and 3D.
- D) only LNAV 2D.

9) According to APCH chart LFBD 12-3 provided what kinds of approach are available

- A) type A and B
- B) 2D and 3D
- C) NPA, APV , PRECISION
- D) All answers are correct

10) In case of NAV mode DR, How aircraft position is computed ?

- A) still computed by GPS.


- B) by nearest VOR DME available.
- C) By heading and True Airspeed.
- D) By observing stars in sky.
-

11) During RNP APCH, in case of integrity message before the FAF what I have to do ?

- A) Abort APCH except if Visual references can be maintained to landing.


- B) Continue RNP APCH and proceed for Missed approach procedure while reaching FAF.
- C) Abort APCH I cannot revert to conventional procedure.
- D) Continue APCH by radar vectoring.

12)During RNP APCH in case of UNABLE RNP message after FAF I must :

- A) Abort APCH except if Visual references can be maintained to landing.


- B) Abort APCH proceed for extraction procedure if ANP> 1NM at MAPT
- C) Abort APCH, at MAPT proceed for Missed approach procedure LNAV if ANP<1NM.
- D) All answers are correct.
ATR 600
PBN
QUESTIONNAIRE

12/07/2022

You might also like