H81TM-ITX R2.

0
Version 1.1
Published February 2015
Copyright©2015 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identiication or explanation and to the owners’ beneit, without intent to
infringe.

Disclaimer:
Speciications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or itness for a particular
purpose.
In no event shall ASRock, its directors, oicers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of proits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
he terms HDMI™ and HDMI High-Deinition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

his device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CALIFORNIA, USA ONLY

he Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

he terms HDMI™ and HDMI High-Deinition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Speciications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 9
2.1 Installing the CPU 10

2.2 Installing the CPU Fan and Heatsink 13

2.3 Installing Memory Modules (SO-DIMM) 14

2.4 Expansion Slots (PCI Express Slots) 16

2.5 Jumpers Setup 17

2.6 Onboard Headers and Connectors 18

Chapter 3 Software and Utilities Operation 24

3.1 Installing Drivers 24

3.2 A-Tuning 25

3.3 Intel® Smart Connect Technology 31

3.4 ASRock APP Shop 36

3.4.1 UI Overview 36

3.4.2 Apps 37

3.4.3 BIOS & Drivers 40

3.4.4 Setting 41

3.5 Start8 42

Chapter 4 UEFI SETUP UTILITY 45

4.1 Introduction 45

4.1.1 UEFI Menu Bar 45

4.1.2 Navigation Keys 46

4.2 Main Screen 47

4.3 OC Tweaker Screen 48

4.4 Advanced Screen 55

4.4.1 CPU Coniguration 56

4.4.2 Chipset Coniguration 58

4.4.3 Storage Coniguration 61

4.4.4 Intel® Smart Connect Technology 62

4.4.5 Super IO Coniguration 63

4.4.6 ACPI Coniguration 64

4.4.7 USB Coniguration 66

4.5 Tools 67

4.6 Hardware Health Event Monitoring Screen 70

4.7 Boot Screen 71

4.8 Security Screen 74

4.9 Exit Screen 75

 H81TM-ITX R2.0

Chapter 1 Introduction
hank you for purchasing ASRock H81TM-ITX R2.0 motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.

In this manual, Chapter 1 and 2 contains the introduction of the motherboard

and step-by-step installation guides. Chapter 3 contains the operation guide of the
sotware and utilities. Chapter 4 contains the coniguration guide of the BIOS setup.

Because the motherboard speciications and the BIOS sotware might be updated, the
content of this documentation will be subject to change without notice. In case any modi-
ications of this documentation occur, the updated version will be available on ASRock’s
website without further notice. If you require technical support related to this mother-
board, please visit our website for speciic information about the model you are using. You
may ind the latest VGA cards and CPU support list on ASRock’s website as well. ASRock
website http://www.asrock.com.

1.1 Package Contents

• ASRock H81TM-ITX R2.0 Motherboard (hin Mini-ITX Form Factor)
• ASRock H81TM-ITX R2.0 Quick Installation Guide
• ASRock H81TM-ITX R2.0 Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x SATA 1 to 2 Power Cable (Optional)
• 2 x I/O Panel Shields
• 1 x WiFi Module Screw
English

1
 1.2 Speciications

Platform • hin Mini-ITX Form Factor (Compatible with Mini-ITX)

• Solid Capacitor for CPU power

CPU • Supports New 4th and 4th Generation Intel® CoreTM i7/i5/i3/
Xeon®/Pentium®/Celeron® Processors with up to 65W TDP in
an LGA1150 package
• Supports Intel® Turbo Boost 2.0 Technology

Chipset • Intel® H81

Memory • Dual Channel DDR3 Memory Technology

• 2 x DDR3 SO-DIMM Slots
• Supports DDR3 1600/1333/1066 non-ECC, un-bufered
memory
• Max. capacity of system memory: 16GB
(see CAUTION)
• Supports Intel® Extreme Memory Proile (XMP)1.3/1.2

Expansion • 1 x PCI Express 2.0 x4 Slot

Slot • 1 x Half mini-PCI Express Slot

Graphics • Intel® HD Graphics Built-in Visuals and the VGA outputs can
be supported only with processors which are GPU integrated.
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® HD Graphics 4400/4600
• Pixel Shader 5.0, DirectX 11.1
• Max. shared memory 1792MB
• hree graphics output options: HDMI, DVI-I and LVDS
• Supports HDMI Technology with max. resolution up to 4K ×
2K (4096x2304) @ 24Hz
• Supports DVI-I with max. resolution up to 1920x1200 @
English

60Hz
• Supports LVDS with max. resolution up to 1920x1200 @
60Hz

2
 H81TM-ITX R2.0

• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports HDCP function with HDMI
• Supports Full HD 1080p Blu-ray (BD) playback with HDMI

Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)
• Premium Blu-ray audio support
• Supports Surge Protection (ASRock Full Spike Protection)
• Supports 3W Audio Ampliier Output

LAN • Gigabit LAN 10/100/1000 Mb/s

• Giga PHY Intel® I218V
• Supports Intel® Remote Wake Technology
• Supports Wake-On-LAN
• Supports Energy Eicient Ethernet 802.3az
• Supports PXE

Rear Panel • 1 x DC Jack

I/O • 1 x DVI-I Port
• 1 x HDMI Port
• 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Front Speaker / Microphone

Storage • 2 x SATA3 6.0 Gb/s connectors, support NCQ, AHCI and Hot
Plug

Connector • 1 x CIR Header

• 1 x COM Port Header
English

• 1 x SPDIF Out Connector

• 1 x Monitor Switch Header
• 1 x Backlight Power Jumper

3
 • 1 x Panel Power Jumper
• 1 x Backlight Control Header
• 1 x LVDS Connector
• 1 x LPC Debug Header
• 1 x Home heater PC Header
• 1 x CPU Fan Connector (4-pin)
• 1 x Chassis Fan Connector (4-pin)
• 1 x Front Panel Audio Connector
• 1 x Analog Surround Audio Header
• 1 x Digital MIC Header
• 1 x 3W Audio AMP Output Wafer Header
• 1 x Internal Power Header
• 1 x SATA Power Connector
• 3 x USB 2.0 Headers (Support 5 USB 2.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))

BIOS • 32Mb AMI UEFI Legal BIOS with multilingual GUI support
Feature • ACPI 1.1 Compliant wake up events
• SMBIOS 2.3.1 support
• CPU, DRAM Voltage multi-adjustment

Hardware • CPU/Chassis temperature sensing

Monitor • CPU/Chassis Fan Tachometer
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
CPU temperature)
• CPU/Chassis Fan multi-speed control
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

OS • Microsot® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-

bit / 7 32-bit / 7 64-bit

Certiica- • FCC, CE, WHQL

tions • ErP/EuP Ready (ErP/EuP ready power supply is required)
English

* For detailed product information, please visit our website: http://www.asrock.com

4
 H81TM-ITX R2.0

Due to limitation, the actual memory size may be less than 4GB for the reservation for sys-
tem usage under Windows® 32-bit operating systems. Windows® 64-bit operating systems
do not have such limitations. You can use ASRock XFast RAM to utilize the memory that
Windows® cannot use.

English

5
 1.3 Motherboard Layout

1 2 3 4 5 6 7 8 9 10

PLED PWRBTN
USB6 CHA_FAN1 CIR1
PANEL1
1
DC Jack 1 1
USB4_5 SATA_POW1
1
HDLED RESET
11
11

ATX19V_IN1
1
BKT_PWR1
12
LPC1 SATA_1 SATA_0 MONITOR_SWITCH1 PNL_PWR1

LVDS1
USB 3.0
26
MINI_PCIE1
T: USB0
1
B: USB1 13
CMOS
Battery 1
14
DDR3_B1
COM1

DVI1 15
CLRCMOS1
DDR3_A1
1
1 BLT_VOL1

Intel H81TM-ITX

USB 3.0
25

H81 16
HDMI1

24 HTPC1

32Mb
BIOS
RJ-45 LAN 1

USB 2.0
T: USB0
B: USB1
HD_AUDIO1
RoHS
Mic In
AUDIO
CODEC

23 1
HD_AUDIO2
1
CPU_FAN1

Front
Speaker SPEAKER1

22 1
USB2_3

HDMI_SPDIF1
1
DMIC1 PCIE1 17
1
1

21 20 19 18
English

6
 H81TM-ITX R2.0

No. Description
1 Internal Power Header (ATX19V_IN1)
2 USB 2.0 Header (USB6)
3 SATA3 Connector (SATA_1)
4 Chassis Fan Connector (CHA_FAN1)
5 Consumer Infrared Module Header (CIR1)
6 SATA3 Connector (SATA_0)
7 USB 2.0 Header (USB4_5)
8 SATA Power Connector (SATA_POW1)
9 Monitor Switch Header (MONITOR_SWITCH1)
10 System Panel Header (PANEL1)
11 Backlight Power Jumper (BKT_PWR1)
12 Panel Power Jumper (PNL_PWR1)
13 LVDS Connector (LVDS1)
14 2 x 204-pin DDR3 SO-DIMM Slots (DDR3_A1, DDR3_B1)
15 Backlight Control Header (BLT_VOL1)
16 COM Port Header (COM1)
17 USB 2.0 Header (USB2_3)
18 CPU Fan Connector (CPU_FAN1)
19 Front Panel Audio Header (HD_AUDIO1)
20 Digital MIC Header (DMIC1)
21 SPDIF Out Connector (HDMI_SPDIF1)
22 3W Audio AMP Output Wafer Header (SPEAKER1)
23 Analog Surround Audio Header (HD_AUDIO2)
24 Home heater PC Header (HTPC1)
25 Clear CMOS Jumper (CLRCMOS1)
26 LPC Debug Header (LPC1)
English

7
 1.4 I/O Panel

1 2 3 4 5 6 7 8

No. Description No. Description

1 DC Jack* 5 LAN RJ-45 Port**
2 USB 3.0 Ports (USB3_01) 6 USB 2.0 Ports (USB01)
3 DVI-I Port (DVI1) 7 Microphone (Pink)
4 HDMI Port (HDMI1) 8 Front Speaker (Lime)
* Please use a 19V power adapter for the DC jack. his jack accepts dual barrel plugs with an inner diameter of
5.1 mm and an outer diameter of 7.4 mm, where the inner contact is +19 (±10%) VDC and the shell is (centre
positive).

DELTA DELTA-ADP-150TB-150W/19V
HP HP-TBC-BA52-150W/19V
FSP FSP-FSP150-ABAN1-150W/19V

** here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Of No Link Of 10Mbps connection
Blinking Data Activity Green 100Mbps connection
On Link Green 1Gbps connection
English

8
 H81TM-ITX R2.0

Chapter 2 Installation
his is a hin Mini-ITX form factor motherboard. Before you install the
motherboard, study the coniguration of your chassis to ensure that the
motherboard its into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

English

9
 2.1 Installing the CPU

1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not
force to insert the CPU into the socket if above situation is found. Otherwise, the CPU
will be seriously damaged.
2. Unplug all power cables before installing the CPU.

2
English

10
 H81TM-ITX R2.0

3 4

English

11
 Please save and replace the cover if the processor is removed. he cover must be placed if
you wish to return the motherboard for ater service.
English

12
 H81TM-ITX R2.0

2.2 Installing the CPU Fan and Heatsink

1 2

N
FA
U_
CP

English

13
 2.3 Installing Memory Modules (SO-DIMM)
his motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM
slots.

It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,
this motherboard and SO-DIMM may be damaged.

he SO-DIMM only its in one correct orientation. It will cause permanent damage to
the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at incorrect
orientation.
English

14
 H81TM-ITX R2.0

English

15
 2.4 Expansion Slots (PCI Express Slots)
here is 1 PCI Express slot and 1 Half mini-PCI Express slot on this motherboard.

Before installing an expansion card, please make sure that the power supply is switched of
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.

PCIe slot:

PCIE1 (PCIe 2.0 x4 slot) is used for PCI Express x4 lane width cards.

mini-PCIe slot:

MINI_PCIE1 (mini-PCIe slot) is used for WiFi module.

English

16
 H81TM-ITX R2.0

2.5 Jumpers Setup

he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. he illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)
(see p.6, No. 25) Default Clear CMOS

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn of the computer and unplug the power
cord from the power supply. Ater waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right ater you update the BIOS. If you need to clear the CMOS when
you just inish updating the BIOS, you must boot up the system irst, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default proile will be cleared only if the CMOS battery is
removed.

Backlight Power Jumper 1-2 : +19V

(3-pin BKT_PWR1) 2-3 : +12V
(see p.6, No. 11)

Panel Power Jumper 1-2 : +3V

(3-pin PNL_PWR1) 2-3 : +5V
(see p.6, No. 12)
English

17
 2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

System Panel Header PLED+

PLED-
Connect the power
PWRBTN#
(9-pin PANEL1) GND switch, reset switch and
(see p.6, No. 10) system status indicator on
1
GND
the chassis to this header
RESET#
GND according to the pin
HDLED-
HDLED+ assignments below. Note
the positive and negative
pins before connecting
the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may conigure the way to turn
of your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the
computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. he LED is on when the
system is operating. he LED keeps blinking when the system is in S1/S3 sleep state. he
LED is of when the system is in S4 sleep state or powered of (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. he LED is on when the
hard drive is reading or writing data.

he front panel design may difer by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.

Serial ATA3 Connectors SATA_1 SATA_0 hese two SATA3

English

(SATA_0: connectors support SATA

see p.6, No. 3) data cables for internal
(SATA_1: storage devices with up to
see p.6, No. 6) 6.0 Gb/s data transfer rate.

18
 H81TM-ITX R2.0

SATA Power Connector Please connect a SATA

(SATA_POW1) power cable.
(see p.6, No. 8)

USB 2.0 Headers USB_PWR Besides two USB 2.0 ports

P+ P-
(5-pin USB6) GND on the I/O panel, there
(see p.6, No. 2) 1 are three headers on this
motherboard.
(9-pin USB2_3) DUMMY

(see p.6, No. 17) GND GND

P+ P+
P- P-
USB_PWR USB_PWR
1

(9-pin USB4_5) USB_PWR

P-
P+
(see p.6, No. 7) GND
DUMMY

1
GND
P+
P-
USB_PWR

Front Panel Audio Header OUT_RET OUT2_L

his header is for
(9-pin HD_AUDIO1) MIC_RED
J_SENSE
connecting audio devices
OUT2_R
(see p.6, No. 19) PRESENCE# MIC2_R to the front audio panel.
GND MIC2_L
1

1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to connect
them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel and
English

adjust “Recording Volume”.

19
 Analog Surround Signal Signal
PIN PIN
Audio Header Name Name
(17-pin HD_AUDIO2) 18 SENSE 17 KEY
(see p.6, No. 23) 16 LFE 15 A_GND
14 A_GND 13 Center
12 Surr_Rear_R 11 A_GND
10 A_GND 9 Surr_Rear_L
8 Surr_Side_R 7 A_GND
2 1 6 A_GND 5 Surr_Side_L
4 Front_R 3 A_GND
2 A_GND 1 Front_L

3W Audio AMP Output Please connect the chassis

1
Wafer Header speaker to this header.
(4-pin SPEAKER1) Front_R-
Front_R+
(see p.6, No. 22) Front_L+
Front_L-

SPDIF Out Connector Please connect the SPDIF

1
(2-pin HDMI_SPDIF1) GND Out connector of a HDMI
SPDIFOUT
(see p.6, No. 21) VGA card to this header
with a cable.

Chassis Fan Connector GND Please connect fan cable

+12V
(4-pin CHA_FAN1) CHA_FAN_SPEED to the fan connector and
(see p.6, No. 4) FAN_SPEED_CONTROL match the black wire to
the ground pin.

CPU Fan Connector FAN_SPEED_CONTROL 4 his motherboard pro-

FAN_SPEED 3
(4-pin CPU_FAN1) vides a 4-Pin CPU fan
+ 12V 2
(see p.6, No. 18) GN D 1 (Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
English

20
 H81TM-ITX R2.0

Internal Power Header his motherboard

(2-pin ATX19V_IN1) provides a 2-pin ATX 19V
(see p.6, No. 1) power connector.

CIR input
Consumer Infrared +5VA his header can be used to
Learn-in
LED
Module Header connect the remote controller
(7-pin CIR1) 1
receiver.
+5VA
(see p.6, No. 5) IRTX
GND

Serial Port Header RI NC

his COM1 header
RTS CTS
(9-pin COM1) GND DSR supports a serial port
TXD DTR
(see p.6, No. 16) DCD RXD
module.
1

LPC Debug Header PIN Signal Name PIN Signal Name

(13-pin LPC1)
1 14 +3V 13 No pin
(see p.6, No. 26)
12 +3V 11 +3V
10 GND 9 GND
8 LAD3 7 LAD2
6 LAD1 5 LAD0
4 LFRAME# 3 RESET#
2 GND 1 CLK

Backlight Control Header 1 1: BKLT_EN

(8-pin BLT_VOL1) 2: BKLT_PWM
(see p.6, No. 15) 3: BKLT_PWR
4: BKLT_PWR
5: GND
6: GND
7: Brightness_Up
8: Brightness_Down

Digital MIC Header 1: +5V

1
English

(5-pin DMIC1) 2: No pin

(see p.6, No. 20) 2: SPDIF_OUT/DMIC_
CLK
3: GND
4: DMIC_DATA
5: +3.3V 21
 Home heater PC PIN Signal Name PIN Signal Name
Header 8 HDMI CEC 7 #Power_Button
(7-pin HTPC1) 6 SMB_DATA 5 3.3V Standby
(see p.6, No. 24) 4 SMB_CLK 3 No pin
1
2 GND 1 Recording LED

LVDS Panel Connector 1

PIN Signal Name PIN Signal Name
(40-pin LVDS1) 1 ODD_Lane3_P 21 NC
(see p.6, No. 13) 2 ODD_Lane3_N 22 EDID_3.3V
3 ODD_Lane2_P 23 LCD_GND
4 ODD_Lane2_N 24 LCD_GND
5 ODD_Lane1_P 25 LCD_GND
6 ODD_Lane1_N 26 ODD_CLK_P
7 ODD_Lane0_P 27 ODD_CLK_N
8 ODD_Lane0_N 28 BKLT_GND
EVEN_Lane3_
9 29 BKLT_GND
P
40
EVEN_Lane3_
10 30 BKLT_GND
N
EVEN_Lane2_
11 31 EDID_CLK
P
EVEN_Lane2_
12 32 BKLT_ENABLE
N
EVEN_Lane1_ BKLT_PWM_
13 33
P DIM
EVEN_Lane1_
14 34 EVEN_CLK_P
N
EVEN_Lane0_
15 35 EVEN_CLK_N
P
EVEN_Lane0_ BKLT_PWR
16 36
N (12V/19V)
BKLT_PWR
17 EDID_GND 37
(12V/19V)
LCD_VCC BKLT_PWR
18 38
(3.3V/5V/12V) (12V/19V)
LCD_VCC
19 39 NC
(3.3V/5V/12V)
LCD_VCC
20 40 EDID_DATA
(3.3V/5V/12V)
English

22
 H81TM-ITX R2.0

Monitor Switch Header 1 his header can be used to

(2-pin MONITOR_ PWRDN connect a switch that turns on/
SWITCH1) GND of the LVDS panel display’s
(see p.6, No. 9) backlight.

English

23
 Chapter 3 Software and Utilities Operation
3.1 Installing Drivers
he Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.

Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. he CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the ile
“ASRSETUP.EXE” in the Support CD to display the menu.

Drivers Menu
he drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. herefore, the drivers you install can work
properly.

Utilities Menu
he Utilities Menu shows the application sotware that the motherboard supports.
Click on a speciic item then follow the installation wizard to install it.

To improve Windows 7 compatibility, please download and install the following hot ix
provided by Microsot.
“KB2720599”: http://support.microsot.com/kb/2720599/en-us
English

24
 H81TM-ITX R2.0

3.2 A-Tuning
A-Tuning is ASRock’s multi purpose sotware suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidiier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.

3.2.1 Installing A-Tuning

When you install the all-in-one driver to your system from ASRock’s support CD,
A-Tuning will be auto-installed as well. Ater the installation, you will ind the icon
“A-Tuning“ on your desktop. Double-click the “A-Tuning“ icon, A-Tuning
main menu will pop up.

3.2.2 Using A-Tuning

here are six sections in A-Tuning main menu: Operation Mode, Tools, OC
Tweaker, System Info, Live Update, Tech Service and Settings.

Operation Mode
Choose an operation mode for your computer.

English

25
 Tools
Various tools and utilities.

XFast RAM
Boost the system’s performance and extend the HDD’s or SDD’s lifespan! Create a
hidden partition, then assign which iles should be stored in the RAM drive.

XFast LAN
Boost the speed of your internet connection! Select a speciic mode for making the
designated program's priority highest.

Fast Boot
Fast Boot minimizes your computer's boot time. Please note that Ultra Fast mode
is only supported by Windows 8.1/8 and the VBIOS must support UEFI GOP if you
are using an external graphics card.

OMG
Schedule the starting and ending hours of Internet access granted to other users.
Place X marks on the time table to disable the Internet.

Good Night LED

English

Switch of the Power/HDD LEDs when the system is on, and automatically switch
of the Power and Keyboard LEDs when the system enters into Standby/Hibernation
mode.

26
 H81TM-ITX R2.0

FAN-Tastic Tuning
Conigure up to ive diferent fan speeds using the graph. he fans will automatically
shit to the next speed level when the assigned temperature is met.

Dehumidiier
Prevent motherboard damages due to dampness. Enable this function and
conigure the period of time until the computer powers on, and the duration of the
dehumidifying process.

USB Key
Plug in the USB Key and let your computer log in to windows automatically!

Disk Health Report

Disk Health Report is a hard disk health monitoring utility that displays detailed
HDD information, such as hard disk model, serial number, irmware, power on
count, power on hours, S.M.A.R.T. values, current temperature, etc. HDD, SSD
and optical disk drives are all supported. he health status block displays Good
(in green color), Caution (in yellow color) or Bad (in red color). Click on the health
status icon to conigure settings for an alert to be triggered.

English

27
 OC Tweaker
Conigurations for overclocking the system.

System Info
View information about the system.
*he System Browser tab may not appear for certain models.
English

28
 H81TM-ITX R2.0

Live Update
Check for newer versions of BIOS or drivers.

Tech Service
Contact Tech Service if you have problems with your computer. Please leave your
contact information along with details of the problem.

English

29
 Settings
Conigure ASRock A-Tuning. Click to select "Auto run at Windows Startup" if you
want A-Tuning to be launched when you start up the Windows operating system.
English

30
 H81TM-ITX R2.0

3.3 Intel® Smart Connect Technology

Intel® Smart Connect Technology is a feature that periodically wakes your computer
from Windows® sleep state to refresh email or social networking applications. It
saves your waiting time and keeps the content always up-to-date.

3.3.1 System Requirements

• Conirm whether your motherboard supports this feature.

• Operating system: Microsot Windows 8/7 (32- or 64-bit edition)

• Set the SATA mode to AHCI. If Windows 8/7 is already installed under IDE
mode, directly changing the SATA mode to AHCI may cause Windows 8/7
to crash while booting. If your system is not in AHCI mode, please follow the
instructions below.

here are certain risks. Please backup any important data before operating to avoid loss.

1. Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.

2. Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\

msahci in Windows Registry Editor. Double click on the value Start and
change the value from 3 into 0. Click on OK.
English

31
 3.3.2 Setup Guide
Installing ASRock Smart Connect Utility
Step 1
Install ASRock Smart Connect Utility, which is located in the folder at the following
path of the Support CD: \ ASRock Utility > Smart Connect.

Step 2
Once installed, run ASRock Smart Connect from your desktop or go to Windows
Start -> All Programs -> ASRock Utility.
English

32
 H81TM-ITX R2.0

Step 3
Click the Add button. Take Foxmail as an example, add Foxmail to the Application
list.

Step 4
Select Foxmail from the Application List, then click the arrow pointing right to add
this application to the Smart Connect List.

Step 5
English

Click Apply to enable Smart Connect.

33
 Step 6
Double-click the Intel® Smart Connect Technology Manager icon in the
Windows system tray.

Step 7
Drag the slider to conigure how oten the system will connect to the network to
download updates. Shorter durations will provide more frequent updates, but may
cause more power consumption.

Using Smart Connect

1. Keep the applications which you wish to connect to the internet and receive
updates while the system is in sleep state running. Foxmail for instance, keep
Foxmail running.

2. Click on Windows Start -> the arrow next to Shut down, and click on Sleep.
English

3. Windows system will enter sleep state.

34
 H81TM-ITX R2.0

4. he system will wake up from sleep state periodically, and then start to update
Foxmail. he screen will not display anything so the computer can maintain
minimum power usage. Aterwards, the system will automatically return to
sleep state again.

5. Upon waking up the system, you will ind the new mail that were sent to you
during sleep state are already updated and ready to be read in Foxmail.

English

35
 3.4 ASRock APP Shop
he ASRock APP Shop is an online store for purchasing and downloading sotware
applications for your ASRock computer. You can install various apps and support
utilities quickly and easily, and optimize your system and keep your motherboard
up to date simply with a few clicks.

Double-click on your desktop to access ASRock APP Shop utility.

*You need to be connected to the Internet to download apps from the ASRock APP Shop.

3.4.1 UI Overview
Category Panel Hot News

Information Panel

Category Panel: he category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.

Information Panel: he information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.

Hot News: he hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.
English

36
 H81TM-ITX R2.0

3.4.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.

Installing an App
Step 1
Find the app you want to install.

he most recommended app appears on the let side of the screen. he other various
apps are shown on the right. Please scroll up and down to see more apps listed.

You can check the price of the app and whether you have already intalled it or not.

- he red icon displays the price or "Free" if the app is free of charge.

- he green "Installed" icon means the app is installed on your computer.

Step 2
Click on the app icon to see more details about the selected app.
English

37
 Step 3

If you want to install the app, click on the red icon to start downloading.

Step 4
When installation completes, you can ind the green "Installed" icon appears on the
upper right corner.

To uninstall it, simply click on the trash can icon .

English

*he trash icon may not appear for certain apps.

38
 H81TM-ITX R2.0

Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will ind the mark of "New Version"
appears below the installed app icon.

Step 1
Click on the app icon to see more details.

Step 2

Click on the yellow icon to start upgrading.

English

39
 3.4.3 BIOS & Drivers

Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.

Step 1

Please check the item information before update. Click on to see more details.
Step 2

Click to select one or more items you want to update.

Step 3

Click Update to start the update process.

English

40
 H81TM-ITX R2.0

3.4.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock APP Shop on Windows
startup.

English

41
 3.5 Start8
For those Windows 8 users who miss the Start Menu, Start8 is an ideal solution that
brings back the familiar Start Menu along with added customizations for greater
eiciency.

3.5.1 Installing Start8

Install Start8, which is located in the folder at the following path of the Support CD:
\ ASRock Utility > Start8.

3.5.2 Coniguring Start8

Style

Select between the Windows 7 style and Windows 8 style Start Menu. hen select
the theme of the Start Menu and customize the style of the Start icon.
English

42
 H81TM-ITX R2.0

Conigure

Conigure provides coniguration options, including icon sizes, which shortcuts you
want Start Menu to display, quick access to recently used apps, the functionality of
the power button, and more.

Control

English

43
 Control lets you conigure what a click on the start button or a press on the
Windows key does.

Desktop

Desktop allows you to disable the hot corners when you are working on the desktop.
It also lets you choose whether or not the system boots directly into desktop mode
and bypass the Metro user interface.

About
Displays information about Start8.
English

44
 H81TM-ITX R2.0

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
ASRock Interactive UEFI is a blend of system coniguration tools, cool sound efects
and stunning visuals. Not only will it make BIOS setup less diicult but also a lot
more amusing. his section explains how to use the UEFI SETUP UTILITY to
conigure your system. You may run the UEFI SETUP UTILITY by pressing <F2>
or <Del> right ater you power on the computer, otherwise, the Power-On-Self-Test
(POST) will continue with its test routines. If you wish to enter the UEFI SETUP
UTILITY ater POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or
by pressing the reset button on the system chassis. You may also restart by turning
the system of and then back on.

Because the UEFI sotware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.

4.1.1 UEFI Menu Bar

he top of the screen has a menu bar with the following selections:

Main For setting system time/date information

OC Tweaker For overclocking conigurations

Advanced For advanced system conigurations

Tool Useful tools

H/W Monitor Displays current hardware status

Boot For coniguring boot settings and boot priority

English

Security For security settings

Exit Exit the current screen or the UEFI Setup Utility

45
 4.1.2 Navigation Keys
Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.

Please check the following table for the descriptions of each navigation key.

Navigation Key(s) Description

+ / - To change option for the selected items

<Tab> Switch to next function

<PGUP> Go to the previous page

<PGDN> Go to the next page

<HOME> Go to the top of the screen

<END> Go to the bottom of the screen

<F1> To display the General Help Screen

<F4> Toggle sound on/of

<F7> Discard changes and exit the SETUP UTILITY

<F9> Load optimal default values for all the settings

<F10> Save changes and exit the SETUP UTILITY

<F12> Print screen

<ESC> Jump to the Exit Screen or exit the current screen

English

46
 H81TM-ITX R2.0

4.2 Main Screen

When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.

Active Page on Entry

Select the default page when entering the UEFI setup utility.

UEFI Guide
UEFI Guide is a quick tutorial for ASRock's UEFI setup Utility. You may abort the
tutorial by pressing "esc".
English

47
 4.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.

Because the UEFI sotware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.

Multi Core Enhancement

Improve the system's performance by forcing the CPU to perform the highest
frequency on all CPU cores simultaneously. Disable to reduce power consumption.

CPU Coniguration
CPU Ratio
he CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
afecting the clock speed of other components.

CPU Cache Ratio

English

he CPU Internal Bus Speed Ratio. he maximum should be the same as the CPU
Ratio.

48
 H81TM-ITX R2.0

CPU OC Fixed Mode

CPU OC ix mode allows you to keep the max CPU ratio as your setting without
throttling. Please note that overclocking may cause damage to your CPU and
motherboard. It should be done at your own risk and expense.

Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.

Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.

Filter PLL Frequency

CPU BCLK Filter Frequency. Choose low for better overclocking capabilities.

Long Duration Power Limit

Conigure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered ater a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

Long Duration Maintained

Conigure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.

Short Duration Power Limit

Conigure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.

Primary Plane Current Limit

Conigure the current limit of the CPU under Turbo Mode in ampere. A lower
limit can protect the CPU and save power, while a higher limit may improve
performance.

GT Frequency
English

Conigure the frequency of the integrated GPU.

49
 GT Voltage Mode
Auto: For optimized settings.

Adaptive: Add voltage to the integrated GPU when the system is under heavy load.

Override: he voltage is ixed.

GT Adaptive Voltage
Conigure the ixed voltage added to the integrated GPU.

GT Voltage Ofset
Conigure the voltage added to the integrated GPU when the system is under heavy load.

DRAM Timing Coniguration

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.

DRAM Coniguration
English

CAS# Latency (tCL)

he time between sending a column address to the memory and the beginning of the data
in response.

50
 H81TM-ITX R2.0

RAS# to CAS# Delay (tRCD)

he number of clock cycles required between the opening of a row of memory and
accessing columns within it.

Row Precharge Time (tRP)

he number of clock cycles required between the issuing of the precharge command
and opening the next row.

RAS# Active Time (tRAS)

he number of clock cycles required between a bank active command and issuing the
precharge command.

Command Rate (CR)

he delay between when a memory chip is selected and when the irst active command can
be issued.

Write Recovery Time (tWR)

he amount of delay that must elapse ater the completion of a valid write operation,
before an active bank can be precharged.

Refresh Cycle Time (tRFC)

he number of clocks from a Refresh command until the irst Activate command to
the same rank.

RAS to RAS Delay (tRRD)

he number of clocks between two rows activated in diferent banks of the same
rank.

Write to Read Delay (tWTR)

he number of clocks between the last valid write operation and the next read
command to the same internal bank.

Read to Precharge (tRTP)

he number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.
English

Four Activate Window (tFAW)

he time window in which four activates are allowed the same rank.

51
 CAS Write Latency (tCWL)
Conigure CAS Write Latency.

tREFI
Conigure refresh cycles at an average periodic interval.

tCKE
Conigure the period of time the DDR3 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.

tRDRD
Conigure between module read to read delay.

tRDRDDR
Conigure between module read to read delay from diferent ranks.

tRDRDDD
Use this to change DRAM tRWSR Auto/Manual settings. he default is [Auto].

tWRRD
Conigure between module write to read delay.

tWRRDDR
Conigure between module write to read delay from diferent ranks.

tWRRDDD
Use this to change DRAM tRRSR Auto/Manual settings. he default is [Auto].

Conigure between module write to read delay from diferent DIMMs.

tWRWR
Conigure between module write to write delay.

tWRWRDR
Conigure between module write to write delay from diferent ranks.

tWRWRDD
English

Conigure between module write to write delay from diferent DIMMs.

RTL (CHA)

52
 H81TM-ITX R2.0

Conigure round trip latency for channel A.

RTL (CHB)
Conigure round trip latency for channel B.

IO-L (CHA)
Conigure IO latency for channel A.

IO-L (CHB)
Conigure IO latency for channel B.

ODT WR (CHA)
Conigure the memory on die termination resistors' WR for channel A.

ODT WR (CHB)
Conigure the memory on die termination resistors' WR for channel B.

ODT NOM (CHA)

Use this to change ODT (CHA) Auto/Manual settings. he default is [Auto].

ODT NOM (CHB)

Use this to change ODT (CHB) Auto/Manual settings. he default is [Auto].

Command Tri State

Enable for DRAM power saving.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

DIMM Exit Mode

Select Slow Exit to reduce power consumption, or Fast Exit for better performance.

FIVR Coniguration
FIVR Switch Frequency Signature
Select whether to boost or lower the FIVR Switch Frequency.
English

FIVR Switch Frequency Ofset

Conigure the percentage of frequency boost or deduction.

Vcore Override Voltage

53
 Conigure the voltage added to the Vcore when the system is under heavy load.

Vcore Voltage Additional Ofset

Conigure the dynamic Vcore voltage added to the Vcore.

CPU Cache Override Voltage

Add voltage to the CPU Cache when the system is under heavy load.

CPU Cache Voltage Ofset

Conigure the voltage for the CPU Cache. Setting the voltage higher may increase
system stability when overclocking.

System Agent Voltage Ofset

Conigure the voltage for the System Agent. Setting the voltage higher may increase
system stability when overclocking.

CPU Analog IO Voltage Ofset

CPU I/O Analog Voltage.

CPU Digital IO Voltage Ofset

CPU I/O Digital Voltage.

CPU Integrated VR Faults

Disable FIVR Faults to raise the threshold to trigger CPU over current protection
and over voltage protection for better overclocking capabilities.

CPU Integrated VR Eiciency Mode

Enable FIVR Eiciency Management for power saving. Disable for better performance and
overclocking capabilities.

Voltage Coniguration
DRAM Voltage
Use this to conigure DRAM Voltage. he default value is [Auto].
English

54
 H81TM-ITX R2.0

4.4 Advanced Screen

In this section, you may set the conigurations for the following items:
CPU Coniguration, Chipset Coniguration, Storage Coniguration, Intel® Smart
Connect Technology, Super IO Coniguration, ACPI Coniguration and USB
Coniguration.

Setting wrong values in this section may cause the system to malfunction.

English

55
 4.4.1 CPU Coniguration

Intel Hyper Threading Technology

Intel Hyper hreading Technology allows multiple threads to run on each core, so that the
overall performance on threaded sotware is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C3 State Support

Enable C3 sleep state for lower power consumption.

CPU C6 State Support

English

Enable C6 deep sleep state for lower power consumption.

CPU C7 State Support

Enable C7 deep sleep state for lower power consumption.

56
 H81TM-ITX R2.0

Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.

No-Execute Memory Protection

Processors with No-Execution Memory Protection Technology may prevent certain
classes of malicious bufer overlow attacks.

Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.

Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.

Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.

English

57
 4.4.2 Chipset Coniguration

Primary Graphics Adapter

Select a primary VGA.

VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.

PCIE1 Link Speed

Select the link speed for PCIE1.

Share Memory
Conigure the size of memory that is allocated to the integrated graphics processor
when the system boots up.

IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is
English

installed. Select enable to keep the integrated graphics enabled at all times.

58
 H81TM-ITX R2.0

Render Standby
Power down the render unit when the GPU is idle for lower power consumption.

LVDS Coniguration
his allows you to enable or disable the Onboard LVDS.

Panel Type Selection

Use this to select a panel type.

Primary IGFX Boot Display

Use this to select the video device which will be activated during POST.

Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel
Enable/disable front panel HD audio.

External Panel
Select [Auto] or [Disabled] for the External Audio Panel.

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

Onboard LAN
Enable or disable the onboard network interface controller.

Wireless
his allows you to enable or disable the Wireless function.

Radio Controller
his allows you to enable or disable the Radio Controller.

Deep Sleep
Conigure deep sleep mode for power saving when the computer is shut down.
English

59
 Restore on AC/Power Loss
Select the power state ater a power failure. If [Power Of] is selected, the power will
remain of when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

Good Night LED

By enabling Good Night LED, the Power/HDD LEDs will be switched of when the
system is on. It will also automatically switch of the Power and Keyboard LEDs
when the system enters into Standby/Hibernation mode.
English

60
 H81TM-ITX R2.0

4.4.3 Storage Coniguration

SATA Controller(s)
Enable/disable the SATA controllers.

SATA Mode Selection

IDE: For better compatibility.

AHCI: Supports new features that improve performance.

AHCI (Advanced Host Controller Interface) supports NCQ and other new features that
will improve SATA disk performance but IDE mode does not have these advantages.

SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.

Hard Disk S.M.A.R.T.

English

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a

monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.

61
 4.4.4 Intel® Smart Connect Technology

Intel® Smart Connect Technology

Intel® Smart Connect Technology automatically updates your email and social
networks, such as Twitter, Facebook, etc. while the computer is in sleep mode.
English

62
 H81TM-ITX R2.0

4.4.5 Super IO Coniguration

Serial Port
Enable or disable the Serial port.

Serial Port Address

Select the address of the Serial port.

English

63
 4.4.6 ACPI Coniguration

Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.

Check Ready Bit

Enable to enter the operating system ater S3 only when the hard disk is ready, this
is recommended for better system stability.

ACPI HPET Table

Enable the High Precision Event Timer for better performance and to pass WHQL
tests.

PCIE Devices Power On

Allow the system to be waked up by a PCIE device and enable wake on LAN.

Wake From Onboard LAN

Allow the system to be waked up by the Onboard Intel I217V LAN.
English

Ring-In Power On
Allow the system to be waked up by onboard COM port modem Ring-In signals.

64
 H81TM-ITX R2.0

RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.

USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.

USB Mouse Power On

Allow the system to be waked up by an USB mouse.

English

65
 4.4.7 USB Coniguration

USB Controller
Enable or disable all the USB ports.

Intel USB 3.0 Controller

Enable or disable all the Intel USB 3.0 ports.

Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

Legacy USB 3.0 Support

Enable or disable Legacy OS Support for USB 3.0 devices.
English

66
 H81TM-ITX R2.0

4.5 Tools

UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network coniguration before using UEFI Tech Service.

Easy Driver Installer

For users that don’t have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.

Instant Flash
Save UEFI iles in your USB storage device and run Instant Flash to update your
UEFI.

Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI irmware version
from our servers for you. Please setup network coniguration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
English

pen drive before using this function.

67
 Network Coniguration
Use this to conigure internet connection settings for Internet Flash.

Internet Setting
Enable or disable sound efects in the setup utility.

UEFI Download Server

Select a server to download the UEFI irmware.

Dehumidiier Function
If Dehumidiier Function is enabled, the computer will power on automatically to
dehumidify the system ater entering S4/S5 state.

Dehumidiier Period
Conigure the period of time until the computer powers on and enables
Dehumidiier ater entering S4/S5 state.

Dehumidiier Duration
Conigure the duration of the dehumidifying process before it returns to S4/S5
state.
English

68
 H81TM-ITX R2.0

Dehumidiier CPU Fan Setting

Conigure the speed of the CPU fan while Dehumidiier is enabled. he higher the
value, the faster the fan speed.

Max: 255

Min: 1

Save User Default

Type a proile name and press enter to save your settings as user default.

Load User Default

Load previously saved user defaults.

English

69
 4.6 Hardware Health Event Monitoring Screen
his section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.

CPU Fan 1 Setting

Select a fan mode for CPU Fans 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 1 Setting

Select a fan mode for Chassis Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Over Temperature Protection

When Over Temperature Protection is enabled, the system automatically shuts
down when the motherboard is overheated.
English

70
 H81TM-ITX R2.0

4.7 Boot Screen

his section displays the available devices on your system for you to conigure the
boot settings and the boot priority.

Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. Ultra Fast mode is only supported by Windows 8 and
the VBIOS must support UEFI GOP if you are using an external graphics card.
Please notice that Ultra Fast mode will boot so fast that the only way to enter this
UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows.

Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.

Setup Prompt Timeout

Conigure the number of seconds to wait for the setup hot key.

Bootup Num-Lock
Select whether Num Lock should be turned on or of when the system boots up.
English

Full Screen Logo

Enable to display the boot logo or disable to show normal POST messages.

71
 AddOn ROM Display
Enable AddOn ROM Display to see the AddOn ROM messages or conigure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Boot Failure Guard

If the computer fails to boot for a number of times the system automatically restores
the default settings.

Boot Failure Guard Count

Conigure the number of attempts to boot until the system automatically restores
the default settings.

CSM (Compatibility Support Module)

CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test. If you are using Windows 8 64-bit and all of your
devices support UEFI, you may also disable CSM for faster boot speed.
English

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

72
 H81TM-ITX R2.0

Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

Launch Video OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

English

73
 4.8 Security Screen
In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.

Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.

User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.

Secure Boot
Enable to support Windows 8 Secure Boot.
English

74
 H81TM-ITX R2.0

4.9 Exit Screen

Save Changes and Exit

When you select this option the following message, “Save coniguration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.

Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.

Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.

Load UEFI Defaults

Load UEFI default values for all options. he F9 key can be used for this operation.

Launch EFI Shell from ilesystem device

English

Copy shellx64.ei to the root directory to launch EFI Shell.

75
 Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp

ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

ASRock EUROPE B.V.

Bijsterhuizen 3151

6604 LV Wijchen

he Netherlands

Phone: +31-24-345-44-33

Fax: +31-24-345-44-38

ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710

U.S.A.

Phone: +1-909-590-8308

Fax: +1-909-590-1026
English

76