35W Single Output Switching Power Supply RS-35 series

■ Features : User’s Manual

Universal AC input / Full range
Protections: Short circuit / Over load / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption<0.5W
All using 105℃ long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty Bauar t gepruft
Sicherheit
egel ma ge
od o s
be wac g

www. tuv.com

SPECIFICATION
ID 2000000000

AS/NZS62368-1 UL62368-1 BS EN/EN62368-1 IEC62368-1 TPTC004

MODEL RS-35-3.3 RS-35-5 RS-35-12 RS-35-15 RS-35-24 RS-35-48

DC VOLTAGE 3.3V 5V 12V 15V 24V 48V
RATED CURRENT 7A 7A 3A 2.4A 1.5A 0.8A
CURRENT RANGE 0 ~ 7A 0 ~ 7A 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 0.8A
RATED POWER 23.1W 35W 36W 36W 36W 38.4W
RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p
OUTPUT VOLTAGE ADJ. RANGE 2.9V ~ 3.6V 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 22 ~ 27.6V 42 ~ 54V
VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION Note.5 ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME 500ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.) 80ms/230VAC 15ms/115VAC at full load
VOLTAGE RANGE 88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY(Typ.) 76.5% 80.5% 84.5% 86% 88% 88.5%
INPUT
AC CURRENT (Typ.) 0.8A/115VAC 0.55A/230VAC
INRUSH CURRENT (Typ.) COLD START 36A/230VAC
LEAKAGE CURRENT <2mA / 240VAC
110 ~ 150% rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 55.2 ~ 64.8V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP. -25 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 6) EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020
MTBF 249Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 99*82*36mm (L*W*H)
PACKING 0.3Kg; 45pcs/14Kg/0.76CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

File Name:RS-35-SPEC 2021-09-15

 35W Single Output Switching Power Supply RS-35 series

Mechanical Specification Case No. 932A Unit:mm

1
9.5

2 ψ3
.5

82
M3
8.2

2-

40
5

40.5
20.5 55

.5
5
ψ3
5 88.5
99

6.5 87

.5 .5
ψ3 ψ3 Terminal Pin No. Assignment
36

2-M Pin No. Assignment Pin No. Assignment

28

3 1 AC/L 4 DC OUTPUT -V
17.5

18 74
2 AC/N 5 DC OUTPUT +V
3 FG

Block Diagram
fosc : 60KHz

EMI RECTIFIERS POWER RECTIFIERS +V

I/P FILTER & &
SWITCHING -V
FILTER FILTER

DETECTION
FG
CIRCUIT
O.L.P. CONTROL
O.V.P.

Derating Curve Output Derating VS Input Voltage

100
100
90
80
80

60 70
LOAD (%)

LOAD (%)

60
40
50
20
40

-25 0 10 20 30 40 50 60 70 (HORIZONTAL) 88 95 100 115 120 140 160 180 200 220 240 264

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz

File Name:RS-35-SPEC 2021-09-15