Scribd
Upload
33 views

AISC 13.0 Properties Viewer

The document provides dimensional and mechanical properties for a W10x49 steel shape, including its cross-sectional area, depths, thicknesses, radii of gyration, moments of inertia, section moduli, and other metrics. Key specifications given are a cross-sectional area of 14.4 in^2, a depth of 10 in, a web thickness of 0.34 in, and a flange width of 10 in. The shape has a weight per foot of 49 plf.

Uploaded by

Milton Italo
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
33 views

AISC 13.0 Properties Viewer

The document provides dimensional and mechanical properties for a W10x49 steel shape, including its cross-sectional area, depths, thicknesses, radii of gyration, moments of inertia, section moduli, and other metrics. Key specifications given are a cross-sectional area of 14.4 in^2, a depth of 10 in, a web thickness of 0.34 in, and a flange width of 10 in. The shape has a weight per foot of 49 plf.

Uploaded by

Milton Italo
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

13th EDITION MEMBER DIMENSIONS AND PROPERTIES VIEWER

W, S, M, HP Shapes

Y
k1=0.8125
k tf=0.56

d=10 T X

tw=0.34

bf=10

W10X49
A= 14.4 in.^2
d= 10 in.
tw = 0.34 in.
bf = 10 in.
tf = 0.56 in.
k(des) = 1.06 in.
k(det) = 1.25 in.
k1 = 0.8125 in.
T= 7.5 in.
gage = 5.5 in.
wt./ft. = 49 plf.
bf/(2*tf) 8.93
h/tw = 23.1
Ix = 272 in.^4
Sx = 54.6 in.^3
rx = 4.35 in.
Zx = 60.4 in.^3
Iy = 93.4 in.^4
Sy = 18.7 in.^3
ry = 2.54 in.
Zy = 28.3 in.^3
rts = 2.84 in.
ho = 9.42 in.
J= 1.39 in.^4
Cw = 2070 in.^6
a= 62.10 in.
Wno = 23.6 in.^2
Sw = 33 in.^4
Qf = 12.8 in.^3
Qw = 29.8 in.^3
NOMENCLATURE FOR AISC VERSION

A= Cross-sectional area of membe


d= Depth of member, parallel to Y-
h= Depth of member, parallel to Y-
tw = Thickness of web of member (i
bf = Width of flange of member, para
b= Width of member, parallel to X-
tf = Thickness of flange of member
k= Distance from outer face of flan
k1 = Distance from web centerline to
T= Distance between fillets for w
gage = Standard gage (bolt spacing) for member (in.)
Ix = Moment of inertia of member t
Sx = Elastic section modulus of me
rx = Radius of gyration of member taken about X-axis (in.) = SQRT(I
Iy = Moment of inertia of member t
Sy = Elastic section modulus of me
ry = Radius of gyration of member taken about Y-axis (in.) = SQRT(I
Zx = Plastic section modulus of me
Zy = Plastic section modulus of me
rts = SQRT(SQRT(Iy*Cw)/Sx
xp = horizontal distance from desig
yp = vertical distance from designa
ho = Distance between centroid of flanges, d-t
J= Torsional moment of inertia of
Cw = Warping constant (in.^6)
C= Torsional constant for HSS sh
a= Torsional property, a = SQRT(E*C
E= Modulus of elasticity of steel
G= Shear modulus of elasticity of
Wno = Normalized warping function at
Sw = Warping statical moment at a p
Qf = Statical moment for a point in
Qw = Statical moment at the mid-dept
x(bar) = Distance from outside face of
y(bar) = Distance from outside face of o
eo = Horizontal distance from the outer edge of a channel web to its shear center (in.) = (approx.) t
xo = x-coordinate of shear center wi
yo = y-coordinate of shear center wi
ro(bar) = Polar radius of gyration about the shear center = SQRT(x
H= Flexural constant, H = 1-(x
LLBB = Long legs back-to-back for do
SLBB = Short legs back-to-back for d
h(flat) = The workable flat (straight) di
b(flat) = The workable flat (straight) di
A(surf) = The total surface area of a rec
STD = Standard weight (Schedule 40)
XS = Extra strong (Schedule 80) pip
XXS = Double-extra strong pipe secti

You might also like