VEL TECH MULTI TECH Dr. RANGARAJAN Dr.

SAKUNTHALA ENGINEERING COLLEGE

(An Autonomous Institution)

Degree/Branch: B.Tech / IT Year / Sem: III/VI

191IT623 - INTERNET OF THINGS – All 5 Units QB
PART A (Objective Type – 1 mark)

UNIT-1
1 IoT deals with ---------------------------- CO1.1 K1
a) Connecting Things b) Connection of Things
c) Connection of computers d) Connecting computers
2 Characteristics of IoT include CO1.1 K1
a) Dynamic & Self-Adapting b) Unique Identity
c) Interoperability d) All the above
3 IoT devices can exchange data CO1.1 K2
a) Directly b) Indirectly c) Both a & b d) None of a & b
4 How many open interfaces are there to connect with Service Capability layers? CO1.1 K1
a) One b) Two c) Three d) NIL
5 The "Things" in IoT refers to physical objects that have ________ identifiers and can sense and CO1.1 K2
communicate with their external environment
a) Double b) Triple c) Unique d) No
6 An equation of internet of things......... CO1.1 K1
a) physical object + controller sensor and actuator + internet
b) controller sensor and actuator + internet
c) physical object + internet
d) physical object + controller + internet
7 HTTP is used in CO1.2 K2
a) Application Layer b) Link Layer
b) Network layer d) Transport Layer
8 Which of the following is NOT a Communication protocol? CO1.2 K1
a) ZigBee b) Bluetooth c) ModBus d) IEEE 801.15.6
9 In IoT environment, the data processing happens at CO1.3 K2
a) cloud b) locally c) both a & b d) None of a& b
10 IPv6 is implemented in _______________ layer CO1.3 K1
a) devices b) services c) application d) network
11 ______________ protocols are the backbone of IoT systems and enable network connectivity and CO1.3 K2
linking to applications.
a) Network b) Communication c) Application d) Cloud
12 IoT Enabling Technologies include CO1.4 K1
a) Cloud b) Communication Protocols c) Big Data d) All the above
13 -------------- use WSN to monitor the health of buildings and bridges CO1.4 K1
a)Surveillance system b)Structural health monitoring system
c)Soil moisture monitoring system d)Weather monitoring system
14 A level-6 IoT system has _______________________ CO1.5 K2
a) multiple independent end nodes b) multiple end nodes and one coordinator node
c) multiple nodes only d) All the three
15 A level-4 IoT system has CO1.5 K2
a) Single node b) two nodes c) multiple nodes d) None of a, b & c
16 Access Network allows the devices in the Device and Gateway Domain to communicate with the CO1.6 K2
Core Network. True or False?
17 The data in IoT is collected in the cloud which can be ________ CO1.6 K1
a) Public b) private c) hybrid cloud d) all the three
18 One of the following is not a cloud service provider. Identify it. CO1.6 K2
a) Google Compute Engine b) Red Hat Linux
c) Amazon Web Services d) Microsoft Azure
19 LTE-A is a communication Protocol used in M2M communications. True or False? CO1.7 K2
20 The main function of M2M Service Bootstrap Function is to facilitate the bootstrapping CO1.7 K1
a) Security credentials b) routing credentials c) network credentials d) data credentials
21 M2M Authentication Server uses ______ for authorization of communication. CO1.7 K1
a) Biometric b) Iris detection c) Face recognition d) Digital certificate
22 Say True or False: The M2M nodes within one network cannot communicate with nodes in an CO1.7 K2
external network.
23 In M2M, the _____________ can use either wired or wireless networks (IP based). CO1.7 K2
a) Communication Network b) M2M Area Network
c) Local Network d) all the above
24 NETCONF is an __________ network management protocol CO1.9 K1
a) IEEE b) ETSI c)IETF d) None
25 YANG is said to be ____________ language. CO1.9 K1
a) tree-structured b) object-oriented c) multinational d) European
PART –B (4*4=16 Marks)

1. List out the various protocols used in different layers during the physical design of IoT. CO1.2 K2
2. While deigning an IoT system, how will you select the functional blocks with respect to Logical design
CO1.3 K4
3. Discuss the importance of Network Management for IoT? CO1.8 K3
 4. From your understanding, discuss the functionalities by Service Manager and Device Manager in Data
Modelling, using YANG? CO1.9 K3
5. Explore the importance of Domain Model and Information Model Specifications in Design Methodology
CO1.10 K4
6. Examine the functionalities in Home Automation domain and Agriculture domain CO1.6 K2
7. Clarify what you understand from the various evolutionary phases of Internet of Things. CO1.1 K4
8. List out the characteristics of Cloud Computing as one of the enabling technologies for IoT and brief them.
CO1.4K2
9. On what basis the deployment happens in various IoT levels? Explain. CO1.5 K4
10. You are assigned with the construction of a multiple node IoT application where-in one of the nodes act as a
coordinator. Explain it with neat diagram CO1.5K4
11. In order to have a good IoT network management system, what are the network operator requirements based on
your understanding? CO1.9K4
12. Differentiate IPv4 and IPv6. (CO1)(K2)

PART –C (12*2=24 Marks)

1. Analyse in detail about the Physical & Logical Design requirements for IoT CO1.2, 3 K4
2. Compare IoT levels 4,5 and 6 systems in terms of Database management, complexity level, involvement of
nodes in the system CO1.5 K4
3. Case Study: How IoT (Sensors, Connectivity, Challenges, Characteristics, Architecture, and Protocol stack)
have been used on Smart Agriculture. CO1.6K4
4. Plan and illustrate the hierarchical steps involved in IoT Design methodology CO1.10K2
5. Elaborate the Domain Specific implementation of IoT for (i) Home Automation (ii) Logistics (iii) Agriculture
CO1.6K3
6. Develop an IOT design for Smart health care system and justify how Privacy and Security is provided in your
prototype CO1.6K3
7. Justify how NETCONF with YANG replaces SNMP for IoT Network ManagementCO1.9K3
8. Elucidate IoT Enabling Technologies. (CO2)(K3)

UNIT-2

PART A (Objective Type – 1 mark)

1. Access Network allows the devices in the Device and Gateway Domain to communicate with the Core Network. True
or False? CO2.1 K1
2. The main function of M2M Service Bootstrap Function is to facilitate the bootstrapping CO2.1 K2
a) Security credentials c) routing credentials
b) network credentials d) data credentials

3. M2M Authentication Server uses ______ for authorization of communication. CO2.1 K2

a) Biometric b) Iris detection

b) Face recognition d) Digital certificate

4. Say True or False: The M2M nodes within one network cannot communicate with nodes in an external network. CO2.1
K2
5. In M2M, the _____________ can use either wired or wireless networks (IP based). CO2.2 K2
a) Communication Network b) M2M Area Network
c) Local Network d) all the above

6. _______ are the devices that are able to emit, accept and process data over the network. CO2.2 K2
a) Sensors b) Gateways c) Edge IT d) Data Acquisition
7. Which environment does Global Sensor Network work on? CO2.3 K1
a) C++ b) JAVA c) HTML d) C
8. ________ is an application layer protocol for resource constrained devices. CO2.3 K2
a) CoAP b) HMTP c) MQTT d) TCP/IP
9. _____ enables open application layer for constrained nodes. CO2.3 K2
a) IETF 6LoWPAN b) IEFT CoAP
c) RFID/NFC d) IEEE 802.15.4.LoWPAN
10. How many messages types are there in CoAP? CO2.3 K1
a) 2 b) 5 c) 3 d) 4

11. IoT- A reference model is a _________ (CO2.5)(K3)

a) Scalable b) Secure
c) Both scalable and secure d) neither scalable nor secure
12. Which protocol is used to link all the devices in the IoT? (CO2.6)(K2)
a) TCP/IP b) Network c) UDP d) HTTP
13. IoT-A stands for ________ (CO2.7)(K1)
a) Internet of Things Address b) Internet of Things Architecture
c) Internet of Things Area d) Industrial of things Architecture
14. In domain model specification, resources are (CO2.4)(K3)

a) Software components which are on-device

b) Software components as network resources
 c) Software components which are either on-device or network resources
d) Software components which are neither on-device nor network resources
15. _____ includes the communication protocols that form the backbone of IoT systems and enable network
connectivity. (CO2.7)(K1)
a) Communication FG b) Management FG
c) Device FG d) Security FG
16. Which type of relationship is indicated by the symbol, ‘→’ between the objects?
(CO2.8)(K3)
a) Generalization b) One-way association c) Specialization d) Aggregation
17. Domain model specification in IoT design methodology is (CO2.4)(K2)
a) technology independent
b) platform independent
c) Either technology or platform independent
d) Both technology and platform independent
18. What is QR code stands for (CO2.7)(K1)
a) Quick Response code b) Quick Result code
c) Quick Reading code d) Query Reading code
19. Virtual Entity attributes can also be --------------copies of the state of an actuator.
(CO2.9)(K2)
a) Digital synchronized b) non-digital synchronized
c) Digital non-synchronized d) digital synchronized
20. Which devices include the necessary conversion of analog electrical signals into digital signals?
(CO2.4)(K1)
a) Actuator b) Sensor c) Tags d)None

PART –B (4*4=16 Marks)

1. Brief about the functionalities of ETSI M2M architecture CO2.2 K2

2. Discuss in brief about Open Geospatial Consortium Architecture CO2.4 K2
3. Figure out the functionalities of IETF architecture CO2.2 K2
4. Interpret: Communication model (CO2.8, K2)
5. Summarize about ARM and describe its types (CO2.9,K3)
 6. Compare the roles of functional model and communication model CO2.7,2.8 K2
7. List the components used in domain model (CO2.3,K2)
8. Ascertain the difference between IETF and ETSI architecture CO2.2,2.3 K2
9. Discover about Functional model CO2.7,K3
10. Summarize about IOT reference architecture CO2.9 K2
11. Brief about the seven layers of IoT designed by IoTWF. (CO2) (K3)
12. Discuss the types of sensors commonly used in IoT systems CO 2.4 k2

PART –C (12*2=24 Marks)

1. Analyze the importance and functionalities of service capability layer in ETSI M2m high level architecture
CO2.2 K4
2. In IETF Architecture, how the layers are differ from OSI architecture and in which layer IPv6 protocols is utilized
and in what way it is being adopted to that layer? CO2.3 K4
3. Discuss how sensors has been used in a device and describe its roles using OGC Architecture in detail CO2.4
K3
4. Summarize the IOT reference Architecture. (CO2.9, K2)
5. Illustrate how the domain model works in IoT Applications (CO2.5, K2)
6. Discover the components of functional model and explain with neat diagram. (CO2.7, K3)
7. Compare the roles of functional model and communication model with a neat diagram CO2.7,2.8 K2
8. Explore the difference between the three main IoT architecture with a neat diagram CO2.2,2.3,2.4 K4

UNIT-3

PART A (Objective Type – 1 mark)

1. MQTT is mainly used for __________ (CO3.9)(K2)

a) M2M communication b) Device communication
c) Internet communication d) Wireless communication
2. Which is an open standard? (CO3.2)(K1)
a) CoAP b) MQTT c) XMPP d) HTTP
3. MQTT is _________ oriented. (CO3.7)(K1)
a) Data b) Message c) Network d) Device
4. What are the key components of a M2M system? (CO3.7)(K1)
a) Vortex DDS b) Smart Homes c) Sensors and Wi-Fi d) Protocols
5. URI and content type support is which protocol feature? (CO3.9)(K2)
a) SPI b) UDP c) HTTP d) CoAP
6. Which of the following is not a sensor in IoT? (CO3.6)(K1)
a) BMP280 b) DHT11 c) Photoresistor d) LED
7. Which functionality of the network layer deals with the necessity of a three-way handshake usually before the
transmission of data from sender to receiver? (CO3.5)(K1)
a) Path determination b) forwarding c) Call Set-up d) All of the above
8. What is the component of an IoT system that executes a program? (CO3.10)(K2)
a) A sensor b) A microcontroller c) An actuator d) A DA Converter
9. Is CoAPa IETF standard? (CO3.5)(K3)
a) True b) False
10. Which one of this is not a networking device? (CO3.7)(K3)
a) Router b) Switch c) Bridge d) Traffic Analyzer
11. Which protocol allows user at one site to establish connection to another site and pass keystroke from local to
remote host: (CO3.9)(K1)
a. Telnet b. FTP c. IP d. HTTP
12. Which of the following is false about the IoT components? (CO3.7)(K2)
a) A light sensor (photo-resistor) is an analog sensor
b) A microphone is a digital sensor
c) A push button is a digital sensor
d) A keyboard is a digital sensor
13. Which of the following protocol is used to link all the devices in the IoT? (CO3.9)(K2)
a) HTTP b) UDP c) Network d) TCP/IP
14. The number of elements in the Open IoT Architecture? (CO3.1)(K1)
a) 6 elements b) 8 elements c) 7 elements d) 3 elements
15. What is the sensor/protocol used in GSN? (CO3.8)(K2)
a) HTTP protocol b) CoAP protocol c) MQTT protocol d) XMPP protocol
16. Open IoT ontology is extending the W3C SSN ontology which supports the description of the physical and
processing structure of sensors.(CO3.9)(K2)
a) True b) False
17. Which of the following is not a ZigBee network topology (CO3.7)(K1)
a) Ring b) mesh c) Tree d) None
18. Which of the following layers are defined by the Zigbee Stack?(CO3.7)(K2)
a) Network layer b) physical layer
c) application support layer d) Medium access layer
19. A packet used for the transmission purpose is basically a combination of __________ (CO3.5)(K2)
a. group of bits b. source & destination addresses
c. both a & b d. none of the above
20. The ability of a single network to span multiple physical networks is known as ______(CO3.5)(K2)
a. Subnetting b. Masking c. Fragmenting d. Hopping

PART –B (4*4=16 Marks)

1. Demonstrate the relationship between the core concepts of the IoT Domain Model and the IoT Information Model
in diagram? (CO3.6, K3)
2. Articulate the advantages of CoAP Protocol CO3.1, K3
3. M2M and WSN protocols differ from each other. Hope you agree with the statement. Discuss what you agree
CO3.3, K2
4. Discuss the requirements of RFID protocols in IoT (CO3.4, K2)
5. SCADA deals with data acquisition. Elaborate how does it happen in SCADA? CO3.4, K2
6. Summarize the importance of Unified Data Standards CO3.5, K2
7. Elaborate the features of Modbus and give the object CO3.9, K2
8. Interpret the importance of MAC Layer in IEEE 802.15.4 CO3.12, K3
9. Examine about BACNET protocol in detail CO 3.9 K3
10. Represent the architecture of Zigbee Protocol
11. Discuss the importance of CoAP functionalities CO 3.12, K2
12. Compare IEEE 802.15.4 with ZigBee CO3.10, K2

PART –C (12*2=24 Marks)

1. Elaborate in detail about the architecture of ZigBee. (CO3.10 K3)
2. Discover how the Protocol standardization of IoT happened and give the current status of standardization
(CO3.1, K4)
3. Elaborate in detail about IEEE 802.15.4 standard (CO3.12, K2)
4. Illustrate 6LOWPAN with mesh addressing, fragmentation, headercompression with diagram.Summarize the IOT
reference Architecture. (CO3.9,K4)
5. Designate the architecture of SCADA and RFID Protocols in detail (CO3.4, K2)
6. Discuss the need of IoT security management system. (CO3.13, K4)
7. Discuss how COAP works and discuss about Routing protocols CO 3.11,3.12,K4
8. Compare the difference between Zigbee Architecture and 802.15.4 standard with its architecture CO3.10,3.8, K4
 UNIT-4

PART A (Objective Type – 1 mark)

1. The Raspberry Pi is defined as the __________(CO4)(K1)
a) Micro Computer
b) Mega Computer
c) Mini computer
d) Nano Computer
2. Raspbian is __________(CO4)(K1)
a) Assembler
b) Language
c) Compiler
d) OS
3. Raspberry Pi consists of a _______ quad-core processor or microprocessor. (CO4)(K1)
a) 16-bit
b) 32-bit
c) 64-bit
d) 128-bit
4. The Raspberry Pi has a __________ interface to allow it to perform serial data communications. (CO4)(K1)
a) UART
b) GPIO
c) I2C
d) SPI
5. What is the speed of operation in Pi 3? (CO4)(K1)
a) 900MHz
b) 1.2GHz
c) 1GHz
d) 500MHz
6. What is the Ethernet/LAN cable used in RPi? (CO4)(K1)
a) Cat5
b) Cat5e
c) Cat6
d) RJ45
7. How many Input/Output pins on board Raspberry Pi3 has? (CO4)(K1)
a) 20
b) 30
c) 40
d) 50
8. How much RAM, the Raspberry Pi has? (CO4)(K1)
a) 2GiB of RAM
b) 1GiB of RAM
c) 4GiB of RAM
d) 8GiB of RAM
9. What is the maximum peripheral current draw allowed in Raspberry Pi 3? (CO4)(K1)
a) 1200 mA
b) 700 mA
c) 500 mA
d) 100 mA
10. What does GPIO stand for? (CO4)(K1)
a) General Purpose Inner Outer Propeller
b) General Purpose Input Output Pins
c) Generally Powered Input Output Pins
d) General Purpose Input Output Processor
11. What do we use to connect TV to RPi? (CO4)(K1)
a) Male HDMI
b) Female HDMI
c) Male HDMI and Adapter
d) Female HDMI and Adapter
12. Which operating system Raspberry Pi has? (CO4)(K1)
a)Linux
b) OpenBSD
c) NetBSD
d) All of the above
13. How power supply is done to RPi?
a) USB connection
b) Internal battery
c) Charger
d) Adapter
14. What are the mode(s) used for addressing the pins in Raspberry Pi? (CO4)(K1)
A) GPI
b) BCM
c) BOARD & BCM
d) GPIO, BCIM & CAN
15. What are the parameters that are default values? (CO4)(K1)
a) Port_Name and Bits
b) Speed and Port_Names
c) Speed and Parity
d) Stop bit and Flow Control
16. The BCM 14 pin of Raspberry Pi is(CO4)(K1)
a) Physical pin 8
b) UART
c) Transmitter pin
d) All of the above
17. What is the command used for easy using of GNU screen? (CO4)(K1)
a) $useradd -G {dialout} your_name
b) Screen Port_Name115200
c) Minicom -b 115200 -o -D Port_Name
d) Prompt> # help
18. The Raspberry Pi is defined as the? (CO4)(K1)
a) Mini computer
b) Micro Computer
c) Mega Computer
d) Nano Computer
19. Which instruction set architecture is used in Raspberry Pi? (CO4)(K1)
a) X86
b) MSP
c) AVR
d) ARM
20. Which instruction set is used in Raspberry Pi? (CO4)(K1)
a) CISC
b) RISC
c) MIPS
d) None of these mentioned
21. Which of the following variants of Raspberry Pi has an inbuilt wi-fi? (CO4)(K1)
a) Raspberry Pi 2
b) Raspberry Pi 3
c) Raspberry Pi A+
d) Raspberry Pi Zero
22. Which of the following is not a types of Raspberry Pi? (CO4)(K1)
a) Raspberry Pi Alternatives
b) Raspberry Pi Zero W
c) Raspberry Pi 3 Model B+
d) Raspberry Pi 3 Model A+
23. What is the default user in Debain on Raspberry Pi? (CO4)(K1)
a) Default
b) User
c) Pi
d) Root
24. What are the distributions are supported by raspberry Pi? (CO4)(K1)
a) Arch Linux
b) Debain
c) Fedora Remix
d) Arch Linux, Debain, and Fedora Remix
25. WiFi is not present in which of the following models? (CO4)(K1)
a) Raspberry Pi3
b) Raspberry Pi Zero WH
c) Raspberry Pi Zero W
d) Raspberry Pi Zero
26. What are the parameters that are default values? (CO4)(K1)
a) Port_Name and Bits
b) Speed and Port_Names
c) Speed and Parity
d) Stop bit and Flow Control
27. What is the microcontroller used in Arduino UNO? (CO4)(K1)
A. atmega328p
B. atmega2560
C. atmega32114
D. at91sam3x8e
What does p refer to in ATmega328p? (CO4)(K1)
A. production
B. pico- power
C. power-pico
D. programmable on chip
28. Arduino shields are also called as(CO4)(K1)
A. extra peripherals
B. add on modules
C. connectivity modules
D. another arduinos
29. The ......... is a way to connecting electronic components to each other
without having solder them together. (CO4)(K1)
a) servo motor
b) Arduino
c) Breadboard
d) GPU
30. ....... and ....... are main components of raspberry pi. (CO4)(K1)
a) LED , USB
b) USB , HDMI
c) LED , HDMI
d) USB , POWER
31. Raspberry Pi consists of a _______ quad-core processor or microprocessor. (CO4)(K1)
A. 16-bit
B. 32-bit
C. 64-bit
D. 128-bit

PART –B (4*4=16 Marks)

1. Name the IoT system building blocks. CO4.6 K2
2. Examine the use and purpose of ArduinoCO4.10, K3
3. Analyze the interfaces in Raspberry Pi. CO4.7K4
4. Generalize on controlling LED with Raspberry Pi. CO4.5K3
5. List the essential requirements for setting up Raspberry Pi. CO4.5,K2
6. Justify the significant of IoT systems. (CO4.6, K3)
7. Analyze the IoT physical devices and Endpoints (CO4.1, K4)
8. Differentiate Raspberry and Arduino.. (CO4.3, K2)
9. Justify how Raspberry Pi is different from a desktop computer. CO4.5K4
10. Discuss about the working of building block of IOT CO4.6 K2
11. Illustrate about the applications which can be build using ArduinoCO4.10, K3
12. Elaborate about the various data types and data structures in Python (CO4, K3)

PART –C (12*2=24 Marks)

1. Analyze and explain in detail Programming Raspberry Pi with python by giving suitable example. Also
elaborate on Raspberry Pi interfaces.(CO4.2, K4)
2. Articulate the special features in the design a basic Arduino board and explain the procedure for installing and
setting up of IDE (CO4.10, K2)
3. Design an automatic lighting system with LDR, Light and raspberry pi and write a python program to support
the working of that design.(CO4.3, K4)
4. Design an automatic refrigerator light system with LED, switch & raspberry pi and write a python program to
support the working of that design.(CO4.3, K4)
5. Illustrate the relative strength and limitation of Building IOT with RASPERRY PI (CO4.2, K4)
6. Express Logical design using python in detail. (CO4.5, K2)
7. Draw and explain the building blocks of IoT device. (CO4.7, K2)
 8. Discuss in detail about Arduino with neat sketch with an example.(CO4.10, K4)

UNIT-5
1. Which of the following is a disadvantage of IoT? (CO5)(K1)
a) Increased efficiency and productivity
b) Improved decision-making and analytics
c) Privacy and security concerns
d) Greater connectivity and collaboration
2. Which of the following is an example of an IoT application in transportation? (CO5)(K1)
a) Online ticket booking system
b) GPS navigation system
c) Traffic management software
d) Automotive diagnostic tool
3. Which of the following is an example of an IoT application in retail? (CO5)(K1)
a) Online advertising platform
b) Customer relationship management software
c) Inventory management system
d) Point of sale system
4. Which of the following is an example of an IoT application in energy management? (CO5)(K1)
a) Online billing and payment platform
b) Smart grid technology
c) Energy efficiency audit software
d) Renewable energy generation system
5. What is the role of cloud computing in IoT? (CO5)(K1)
a) To store and process data collected by IoT devices
b) To provide connectivity between IoT devices
c) To analyze data generated by IoT devices
d) To manage and control IoT devices
6. Which of the following is an example of an IoT application in home automation? (CO5)(K1)
a) Smart lighting system
b) Online grocery delivery service
c) Smart home security system
d) Virtual reality entertainment system
7. Which of the following is an example of an IoT application in environmental monitoring? (CO5)(K1)
a) Online weather forecasting service
b) Air quality monitoring system
c) Wildlife tracking system
d) Geographical information system (GIS)
8. What is the role of machine learning in IoT? (CO5)(K1)
a) To control and manage IoT devices
b) To analyze and make predictions based on IoT data
c) To provide connectivity between IoT devices
d) To store and process IoT data
9. Which of the following is an example of an IoT application in logistics and supply chain management? (CO5)(K1)
a) Online ordering platform
b) Shipping and tracking software
c) Customer relationship management software
d) Product design and development software
10. Which of the following is an example of an IoT application in sports? (CO5)(K1)
a) Online ticket sales platform
b) Wearable fitness tracker
c) Virtual reality sports training system
d) Social media marketing platform
11. Which of the following is an example of an IoT application in smart cities? (CO5)(K1)
a) Online citizen engagement platform
b) Traffic management software
c) Public transportation scheduling system
d) Waste management system
12. What is the role of blockchain in IoT? (CO5)(K1)
a) To provide connectivity between IoT devices
b) To analyze and make predictions based on IoT data
c) To manage and control IoT devices
d) To secure and authenticate IoT data transactions
13. Which of the following is an example of an IoT application in the automotive industry? (CO5)(K1)
a) Online car sales platform
b) Automotive diagnostic tool
c) Automotive manufacturing process optimization software
d) Traffic management software
14. Which of the following is an example of an IoT application in the hospitality industry? (CO5)(K1)
a) Online hotel booking platform
b) Room temperature control system
c) Hotel guest experience management software
d) Restaurant reservation system
15. Which of the following is an example of an IoT application in industrial automation? (CO5)(K1)
a) Online industrial equipment marketplace
b) Automated manufacturing system
c) Supply chain management software
d) Warehouse management system
16. Which of the following is an example of an IoT application in finance?
a) Online banking platform
b) Financial planning software
c) Investment management platform
d) Cryptocurrency exchange
17. Which of the following is an example of an IoT application in real estate? (CO5)(K1)
a) Online property listing platform
b) Smart home automation system
c) Property management software
d) Real estate market analysis platform
18. Which of the following is an example of an IoT application in education? (CO5)(K1)
a) Online learning platform
b) Learning management system
c) Student information system
d) Student engagement platform
19. Which of the following is an example of an IoT application in gaming? (CO5)(K1)
a) Online gaming platform
b) Virtual reality gaming system
c) Gaming analytics platform
d) Gaming content management system
20. Which of the following is an example of an IoT application in logistics? (CO5)(K1)
a) Online logistics marketplace
b) Automated warehouse system
c) Freight tracking and management software
d) Shipping and delivery management software
21. Which of the following is an example of an IoT application in entertainment? (CO5)(K1)
a) Online streaming platform
b) Music composition and production software
c) Film and video production software
d) Live event ticketing and management platform
22. Which of the following is an example of an IoT application in security?
a) Online security software marketplace
b) Biometric authentication system
c) Cybersecurity threat detection and management software
d) Physical security monitoring and access control system
23. Which of the following is an example of an IoT application in insurance? (CO5)(K1)
a) Online insurance marketplace
b) Automated claims processing system
c) Risk management software
d) Actuarial analysis and modeling software
24. Which of the following is an example of an IoT application in manufacturing? (CO5)(K1)
a) Online manufacturing marketplace
b) Smart factory automation system
c) Supply chain management software
d) Quality control and inspection software
25. Which of the following is an example of an IoT application in construction? (CO5)(K1)
a) Online construction marketplace
b) Building information modeling software
c) Construction project management software
d) Construction materials and equipment rental platform
26. Which of the following is NOT a key technology component of an IoT system? (CO5)(K1)
a) Cloud computing
b) Artificial intelligence
c) Virtual reality
d) Wireless communication
27. Which of the following wireless communication protocols is commonly used in IoT devices? (CO5)(K1)
a) Wi-Fi
b) Bluetooth
c) Zigbee
d) All of the above
28. Which of the following is a key challenge in implementing IoT systems? (CO5)(K1)
a) Lack of standardization
b) High cost of hardware and software
c) Limited data storage and processing capacity
d) Limited availability of wireless communication networks
29. Which of the following is NOT a benefit of using IoT systems in business? (CO5)(K1)
a) Increased productivity and efficiency
b) Improved customer engagement and satisfaction
c) Enhanced security and privacy
d) Reduced operational costs and waste
30. Which of the following is a common use case for edge computing in IoT systems? (CO5)(K1)
a) Real-time data processing and analysis
b) Remote device management and monitoring
c) Cloud-based data storage and retrieval
d) Long-term trend analysis and forecasting
31. Which of the following is a potential disadvantage of using cloud computing in IoT systems? (CO5)(K1)
a) High cost of data storage and processing
b) Limited scalability and flexibility
c) Reliance on external service providers
d) Limited data security and privacy
32. Which of the following is an example of a smart home application of IoT? (CO5)(K1)
a) Online home rental marketplace
b) Home security and surveillance system
c) Home energy management platform
d) Home cleaning and maintenance service
33. Which of the following is an example of a smart city application of IoT? (CO5)(K1)
a) Online city guide and directory
b) Public transportation tracking and scheduling system
c) Waste management and recycling platform
d) Tourist information and booking service
34. Which of the following is a potential privacy concern associated with the use of IoT systems? (CO5)(K1)
a) Unauthorized access to personal data
b) Loss of connectivity and data loss
c) Inability to integrate with legacy systems
d) Incompatibility with existing software and hardware
35. Which of the following is an example of a wearable technology device? (CO5)(K1)
a) Smart home thermostat
b) Fitness tracker
c) Voice-activated assistant
d) Home security camera

PART –B (4*4=16 Marks)

1. Illustrate the utility of Smart Traffic Application CO5.5, K3

2. Develop the Smart Parking Use Case
3. Assess the importance of Participatory Sensing in IoT implementation CO5.6, K3
4. Express your views about Event –driven industrial IoT systems CO5.3, K3
5. Identify the requirements of Commercial building automation in IoT CO5.4, K2
6. Narrate the working of tools in cloud storage models CO5.4, K4
7. Illustrate the importance of Data Analytics for IoT CO5.9, K2
8. Mention the Real world design constraints with applications.( CO5.9, K3)
9. Why do we need IOT and how it will be used? (CO5.14, K4)
10. Designate the roles of Cloud in IOT CO 5.11K2
11. Analyze the Asset management use case in detail. (CO5.3, K4)
12. Elaborate Simple Storage Services AWS S3 (CO5, K2)
 PART –C (12*2=24 Marks)
1. (i) Generalize an IoT strategy for smart city. (ii) Design a smart city layered architecture and explain how
security is provided(CO5.2, K4)
2. Develop an Amazon Web Services for IoT(CO 5.8, K3)
3. Analyze about Commercial Building Automation (CO 5.3, K4)
4. Construct the Design of Smart home with Raspberry Pi and other hardware devices with neat sketch. (CO5.5,
K2)
5. Formulate the significant use of Raspberry Pi in Smart cities. (CO5.1, K4)
6. Construct the Design of Industrial Automation and other hardware devices with neat sketch (CO5.12, K3 )
7. Express about Data analytics in IOT (CO5.13, K4)
8. Discuss in detail about Software and Management Tools for IOT cloud storage model CO5.8, K3