Scribd
Upload
22 views

AngledPartAligner Py

The document contains code that uses input to collect geometric properties of two parts, including width, height, position, and orientation. It then performs trigonometric calculations to determine the x and y coordinates of each part based on the input values and the part's side (left or right). The x and y coordinates of each part are then printed.

Uploaded by

haydarrafi.akhtar11
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
22 views

AngledPartAligner Py

The document contains code that uses input to collect geometric properties of two parts, including width, height, position, and orientation. It then performs trigonometric calculations to determine the x and y coordinates of each part based on the input values and the part's side (left or right). The x and y coordinates of each part are then printed.

Uploaded by

haydarrafi.akhtar11
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

import math

accepting = True
state = 0

while accepting:
if state == 0:
side = input("Side (L/R): ").lower()
if side == "l":
side = 1
state = 1
elif side == "r":
side = -1
state = 1
else:
pass
elif state == 1:
try:
part_a_w = float(input("Root part width: "))
state = 2
except ValueError:
print("Input must be a number!")
elif state == 2:
try:
part_a_h = float(input("Root part height: "))
state = 3
except ValueError:
print("Input must be a number!")
elif state == 3:
try:
part_a_x = float(input("Root part x: "))
state = 4
except ValueError:
print("Input must be a number!")
elif state == 4:
try:
part_a_y = float(input("Root part y: "))
state = 5
except ValueError:
print("Input must be a number!")
elif state == 5:
try:
part_a_z = float(input("Root part z: "))
state = 6
except ValueError:
print("Input must be a number!")
elif state == 6:
if part_a_z < 0:
part_a_z += 360
accepting = False
accepting_2 = True

w_b = math.sin(math.radians(part_a_z)) * (part_a_w / 2)


w_a = math.cos(math.radians(part_a_z)) * (part_a_w / 2)

h_b = math.sin(math.radians(part_a_z)) * part_a_h


h_a = math.cos(math.radians(part_a_z)) * part_a_h

if side == 1:
root_x = part_a_x - h_b - w_a
root_y = part_a_y + h_a - w_b
elif side == -1:
root_x = part_a_x - h_b + w_a
root_y = part_a_y + h_a + w_b

state = 1

while accepting_2:

if state == 1:
try:
part_b_w = float(input("Secondary part width: "))
state = 2
except ValueError:
print("Input must be a number!")
elif state == 2:
try:
part_b_z = float(input("Secondary part z: "))
state = 3
except ValueError:
print("Input must be a number!")
elif state == 3:
if part_b_z < 0:
part_b_z += 360
accepting_2 = False

w_b = math.sin(math.radians(part_b_z)) * (part_b_w / 2)


w_a = math.cos(math.radians(part_b_z)) * (part_b_w / 2)

part_x = root_x + w_a * side


part_y = root_y + w_b * side

print(round(part_x, 6))
print(round(part_y, 6))

while True:
if input("Press any key to exit... "):
break

You might also like