1.6*1.6*0.

6mm SMD CHIP LED E6C0606RGBC3UDA

LIGHT EMITTING DIODE SPECIFICATION

DESCRIPTION: E6C0606RGBC3UDA

REVISION： V2.2

ISSUE DATE： 2022-03-25

Contains trade secret information which is the property of Ekinglux and shall not be made available to, or copied or
used by anyone outside Ekinglux without its written authorization. Copyright © 2017 Ekinglux Optoelectronics Technology
Co., Ltd. All rights reserved

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

1
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Features:
●Long operating life
●Low Power Consumption
●Wide Viewing Angle
●Low voltage DC operated
●RoHS Compliant

Application:
●Backlight
●Decoration lighting
●motormeter
●Indicator

Part Number Dice Material Emitted Color Lens Color

E6C0606RGBC3UDA AlGaInP-InGaN-InGaN Red-Green-Blue Water Clear

Electro-Optical Characteristics(Ta=25℃, @20mA)

Parameter Color Symbol Min. Typ. Max. Unit
■ 70 100 150
Luminous Intensity ■ IV 400 500 800 mcd
■ 70 100 150
■ - 20 -
Radiation Bandwidth ■ △λ - 35 - nm
■ - 25 -
■ 1.90 - 2.20
Forward Voltage ■ VF 2.90 - 3.40 v
■ 2.90 - 3.40
■ 620 625 630
Dominant Wavelength ■ λd 518 525 530 nm
■ 460 465 475
Viewing Angle - 2θ1/2 - 120 - deg
Reverse Current - IR - - 10 uA

Absolute Maximum Ratings(Ta=25℃)

Parameter Symbol Max. Unit
Peak Forward Current(1/10 Duty Cycle, 0.1ms Pulse Width) IFP 100 mA
Continue Working Forward Current IF 20 mA
Reverse Voltage VR 5 v
o
Operating Temperature Range Topr -40to+90 C
o
Storage Temperature Range Tstg -40to+90 C
Reflow Soldering Tsld 260℃for 10secs

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

2
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Optical & Electrical Characteristics

Relative Intensity vs.Wavelength
100%
Ta=25°c
80%
Relative lntensity(%)

60%

40%

20%

0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
Forward Current vs.Forward Voltage Forward Current vs.Ambient Temperature

Permissible Forward Current(mA)

50 60
Ta=25°c
50
Forward Current(mA)

40
40
30
30
20
20
10 10

0 0
1.6 2.0 2.4 2.8 3.2 3.6 0 20 40 60 80 100
Forward Voltage(V) Ambient Temperature(°c)
Relative lntensity vs.Forward Currenr Relative lntensity vs.Ambient Temperature
3.5 1.2
Ta=25°c
3.0 1.0
Relative lntensity

Relative lntensity

2.5 0.8

2.0 0.6

1.5 0.4

1.0 0.2
0 0
0 20 40 60 80 100 0 20 40 60 80 100
Forward Currenr(mA) Ambient Temperature(°c)
Radiation Pattern
-10° 0° 10°
-20° 20°
-30° 30°
Ta=25°c
-40° 40°
-50° 50°

-60° 60°

-70° 70°

-80° 80°
-90° 90°
1.0 0.5 0 0.5 1.0

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

3
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Reliability Test Items And Conditions

Test Items Reference Test Conditions Time Quantity Criterion

-40℃（30min） 100
Thermal Shock MIL-STD-202G 22 0/22
-100℃（30min） Cycles
Temperature And Humidity JEITA ED-4701 200 -10℃~65℃；
10cycles 22 0/22
Cyclic 203 0%~90%RH
JEITA ED -4071 200
High Temperature Storage Ta=100℃ 1000H 22 0/22
201
JEITA ED -4071 200
Low Temperature Storage Ta=-40℃ 1000H 22 0/22
202
High Temperature High JEITA ED -4071 100 Ta=60℃；
1000H 22 0/22
Humidity Storage 103 RH=90%
High Temperature Life Test JESD22-A108D Ta=80℃ 1000H 22 0/22
Ta=25℃
Life Test JESD22-A108D 1000H 22 0/22
IF=5mA
Resistance to Sodering GB/T 4937,Ⅱ， Tsol*=(240±5)
2 times 22 0/22
Heat 2.2&2.3 ℃10secs

Criteria For Judging Damage

Test Items Symbol Test Conditions Criteria For Judging Damage

Forward Voltage VF IF=IFT Initial Data±10%
Recerse Current IR VR=5V IR≤10uA
Average IV degradation≤30%；Single LED IV
Luminous Intensity IV IF=IFT
degradation≤50%
Resistance to Meterial without internal cracks,no meterial
- -
Soldering Heat between stripped,no deaded light

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

4
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Product size (Unit:mm)

NOTES：
1. All dimensions are in millimeters (inches)
2. Tolerances are 0.2mm (0.008inch) unless otherwise noted

Recommended Soldering Pad Design (Unit:mm)

Taping and package Spec

●Tape Specification:3,000pcs Per Reel

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

5
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Packaging

LabelStyle

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

6
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Table of Classification Reflow Profiles

Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly
Preheat & Soak 100 °C 150 °C

Temperature min (Tsmin) 150°C 200 °C

60-120 seconds 60-120 seconds
Temperature max (Tsmax)
Time (Tsmin to Tsmax) (ts)
3 °C/second max 3 °C/second max
Average ramp-up rate (Tsmax to Tp)

Liquidous temperature (TL) 183 °C 217 °C

Time at liquidous (tL) 60-150 seconds 60-150 seconds
Peak package body temperature (Tp)* 230 °C ~235 °C 255 °C ~260 °C
Classification temperature (Tc) 235 °C 260 °C
Time (tp) within 5 °C of the specified 20 seconds 30 seconds
Classification temperature (Tc)
Average ramp-down rate (Tp to Tsmax) 6 °C/second max 6 °C/second max
Time 25 °C to peak temperature 6 minutes max 8 minutes max
1. Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
2.Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

7
 1.6*1.6*0.6mm SMD CHIP LED E6C0606RGBC3UDA

Precautions
1. Storage：
●Moisture proof and anti-electrostatic package with moisture absorbent material is used, to keep moisture to
aminimum.
●Before opening the package, the product should be kept at 30℃ or less and humidity less than 60% RH, and beused
within a year.
●After opening the package, the product should be stored at 30℃ or less and humidity less than 10%RH. It is
recommended that the product be operated at the workshop condition of 30℃ or less and humidity less than 60%RH.
●If the moisture absorbent material has fade away or the LEDs have exceeded the storage time, baking treatment should
be performed based on the following condition: (70±5)℃ for 24 hours.
2. Static Electricity：
Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristic such as the
forward voltage becomes lower, or the LEDs do not light at the low current. even not light.
All devices, equipment and machinery must be properly grounded. At the same time, it is recommended that wrist bands
or anti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.
3. Vulcanization：
LED curing is due to sulfur being in bracket and the +1 price of silver in the chemical reaction generated Ag2S in the
process. It will lead to the capacity of reflecting of silver layer reducing, light color temperature drift and serious
decline ,seriously affecting the performance of the product.So we should take corresponding measures to avioding
vulcanization, such as to avoid using sulphur volatile substances and keeping away from high sulphur content of the
material.

www.ekingluxs.com Tel:021-59909181 021-59909182 [email protected]

8