Scribd
Upload
57 views9 pages

Class-2 1

1) The document discusses basic router configuration and commands including setting the clock, hostname, banner, and saving configurations. 2) Static and dynamic routing configurations using default routes, static routes between routers, and RIP routing are presented to connect LAN networks across WAN links. 3) Detailed configurations are shown for routers connecting 4 LANs (192.168.1.0, 192.168.2.0, 192.168.3.0, 192.168.4.0) across a WAN using static and RIP routing.

Uploaded by

jokate6848
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views9 pages

Class-2 1

1) The document discusses basic router configuration and commands including setting the clock, hostname, banner, and saving configurations. 2) Static and dynamic routing configurations using default routes, static routes between routers, and RIP routing are presented to connect LAN networks across WAN links. 3) Detailed configurations are shown for routers connecting 4 LANs (192.168.1.0, 192.168.2.0, 192.168.3.0, 192.168.4.0) across a WAN using static and RIP routing.

Uploaded by

jokate6848
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

PART-1 (CCNA)

Some Basic Commands


View Router’s command : #show ?
Back to usable mode : ctrl + shift + 6
Back to privilege mode : ctrl + z
View networks : show ip route
View connected network : show ip route connected
Delete configuration : write erase
View all interface : show ip interface brief
Save configuration : copy running-config startup-config
Back to Privileged mode : end

Configure Router / Switch


Router >en
Router #clock set 10:10:10 27 Feb 2019
Router# show clock
Router (config)#hostname cse
cse(config)#enable secret abc123
cse(config)# banner motd $Omar Faruq$
Router# wr
Router# show running conf
LANs Divided by A Router
DHCP
Default Route
Default Route, Configuration

Router-1:
Router(config)#interface FastEthernet0/1
Router(config-if)#ip address 10.10.10.1 255.255.255.0
interface Serial0/3/0
Router(config-if)#ip address 123.23.23.1 255.255.255.0
Router(config)#ip route 0.0.0.0 0.0.0.0 123.23.23.2

Router-0:
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 172.16.1.1 255.255.255.0
Router(config)#interface Serial0/3/0
Router(config-if)#ip address 123.23.23.2 255.255.255.0
Router(config)#interface Serial0/3/1
Router(config-if)#ip address 203.30.30.1 255.255.255.0
Router(config)#ip route 0.0.0.0 0.0.0.0 123.23.23.1
Router(config)#ip route 0.0.0.0 0.0.0.0 203.30.30.2

Router-2:
Router(config)#interface FastEthernet0/1
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config)#interface Serial0/3/0
Router(config-if)#ip address 203.30.30.2 255.255.255.0
Router(config)#ip route 0.0.0.0 0.0.0.0 203.30.30.1
Static-WAN
Static-WAN, Configuration
Router-0
Router(config)#hostname Router0 Router-3
Router0(config)#interface fastEthernet0/0 Router(config)#hostname Router3
Router3(config)#interface fastEthernet0/0
Router0(config-if)#ip address 192.168.1.1 255.255.255.0
Router3(config-if)#ip address 192.168.4.1 255.255.255.0
Router0(config-if)#no shutdown Router3(config-if)#no shutdown
Router0(config-if)#Interface fastEthernet0/1 Router3(config-if)#Interface fastEthernet0/1
Router0(config-if)#ip address 192.168.0.1 255.255.255.0 Router3(config-if)#ip address 192.168.0.4 255.255.255.0
Router0(config-if)#no shutdown Router3(config-if)#no shutdown

Router-0
Router-1 Router0(config)#ip route 192.168.2.0 255.255.255.0 192.168.0.2
Router(config)#hostname Router1 Router0(config)#ip route 192.168.3.0 255.255.255.0 192.168.0.3
Router1(config)#interface fastEthernet0/0 Router0(config)#ip route 192.168.4.0 255.255.255.0 192.168.0.4
Router1(config-if)#ip address 192.168.2.1 255.255.255.0
Router1(config-if)#no shutdown Router-1
Router1(config-if)#Interface fastEthernet0/1 Router1(config)#ip route 192.168.1.0 255.255.255.0 192.168.0.1
Router1(config-if)#ip address 192.168.0.2 255.255.255.0 Router1(config)#ip route 192.168.3.0 255.255.255.0 192.168.0.3
Router1(config)#ip route 192.168.4.0 255.255.255.0 192.168.0.4
Router1(config-if)#no shutdown
Router-2
Router-2 Router2(config)#ip route 192.168.1.0 255.255.255.0 192.168.0.1
Router(config)#hostname Router2 Router2(config)#ip route 192.168.2.0 255.255.255.0 192.168.0.2
Router2(config)#interface fastEthernet0/0 Router2(config)#ip route 192.168.4.0 255.255.255.0 192.168.0.4
Router2(config-if)#ip address 192.168.3.1 255.255.255.0
Router2(config-if)#no shutdown Router-3
Router2(config-if)#Interface fastEthernet0/1 Router3(config)#ip route 192.168.1.0 255.255.255.0 192.168.0.1
Router3(config)#ip route 192.168.2.0 255.255.255.0 192.168.0.2
Router2(config-if)#ip address 192.168.0.3 255.255.255.0 Router3(config)#ip route 192.168.3.0 255.255.255.0 192.168.0.3
Router2(config-if)#no shutdown
RIP (Dynamic-WAN)
RIP (Dynamic-WAN), Configuration
Router-0
Router(config)#hostname Router0 Router-3
Router0(config)#interface fastEthernet0/0 Router(config)#hostname Router3
Router0(config-if)#ip address 192.168.1.1 255.255.255.0 Router3(config)#interface fastEthernet0/0
Router0(config-if)#no shutdown Router3(config-if)#ip address 192.168.4.1
Router0(config-if)#Interface fastEthernet0/1 255.255.255.0
Router0(config-if)#ip address 192.168.0.1 255.255.255.0 Router3(config-if)#no shutdown
Router0(config-if)#no shutdown Router3(config-if)#Interface fastEthernet0/1
Router3(config-if)#ip address 192.168.0.4
Router-1 255.255.255.0
Router(config)#hostname Router1 Router3(config-if)#no shutdown
Router1(config)#interface fastEthernet0/0
Router1(config-if)#ip address 192.168.2.1 255.255.255.0 Router-0
Router1(config-if)#no shutdown Router0(config)# router rip
Router0(config)# network 192.168.1.0
Router1(config-if)#Interface fastEthernet0/1
Router0(config)# network 192.168.0.0
Router1(config-if)#ip address 192.168.0.2 255.255.255.0
Router1(config-if)#no shutdown Router-1
Router1(config)# router rip
Router-2 Router1(config)# network 192.168.2.0
Router(config)#hostname Router2 Router1(config)# network 192.168.0.0
Router2(config)#interface fastEthernet0/0
Router-2
Router2(config-if)#ip address 192.168.3.1 255.255.255.0
Router2(config)# router rip
Router2(config-if)#no shutdown Router2(config)# network 192.168.3.0
Router2(config-if)#Interface fastEthernet0/1 Router2(config)# network 192.168.2.0
Router2(config-if)#ip address 192.168.0.3 255.255.255.0
Router2(config-if)#no shutdown Router-3
Router3(config)# router rip
Router2(config)# network 192.168.4.0
Router2(config)# network 192.168.2.0

You might also like