Scribd
Upload
25 views2 pages

PDF Guide Compress

This document provides torque values in Newton metres and foot pounds for metric and imperial sized bolts of different thread classes and grades. It recommends chamfering holes to clear the radius under bolt heads to ensure loads are taken on the flat surface under the head for optimal performance. Torque values increase with larger bolt sizes and higher strength classes and grades.

Uploaded by

Gilberto Garnica Murillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views2 pages

PDF Guide Compress

This document provides torque values in Newton metres and foot pounds for metric and imperial sized bolts of different thread classes and grades. It recommends chamfering holes to clear the radius under bolt heads to ensure loads are taken on the flat surface under the head for optimal performance. Torque values increase with larger bolt sizes and higher strength classes and grades.

Uploaded by

Gilberto Garnica Murillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TORQUE GUIDE

FOR COMMON SIZES


SIZES OF THREA
THREAD
D AND BOLT TENSILE
CLASSES.

These figures are intended as a guide to achieving optimum


performance from your nuts and bolts.
Metric
Thread Class 4.6 Class 8.8 Class 10.9 Class 12.9
M6 4 NM 9 NM 13 NM 17 NM
M8 9 NM 22 NM 32 NM 41 NM
M10 17 NM 44 NM 63 NM 81 NM
M12 30 NM 77 NM 109 NM 141 NM
M14 124 NM 150 NM 225 NM
M16 74 NM 190 NM 270 NM 350 NM
M18 250 NM 480 NM
M20 144 NM 372 NM 528 NM 680 NM
M22 498 NM 722 NM 925 NM
M24 249 NM 640 NM 914 NM 1170 NM
M27 940 NM 1700 NM
M30 496 NM 1280 NM 1817 NM 2325 NM
M36 864 NM 1987 NM 3173 NM 4050 NM

In the above table “NM” refers to Newton Metres of torque.


To convert to foot pounds use

Imperial
thread Grade 5 Grade 8 FX180 bolt FX180 nut
1/4UNC 7 ftlb 10 ftlb 10 ftlb 11 ftlb
5/16UNC 15 ftlb 21 ftlb 19 ftlb 21 ftlb
3/8UNC 27 ftlb 38 ftlb 30 ftlb 33 ftlb
7/16UNC 43 ftlb 60 ftlb 55 ftlb 60 ftlb
1/2UNC 66 ftlb 92 ftlb 85 ftlb 95 ftlb
9/16UNC 94 ftlb 133 ftlb 120 ftlb 140 ftlb
5/8UNC 130 ftlb 183 ftlb 170 ftlb 185 ftlb
3/4UNC 230 ftlb 325 ftlb 265 ftlb 290 ftlb
7/8UNC 370 ftlb 523 ftlb 475 ftlb 505 ftlb

1”UNC 558 ftlb 785 ftlb 550 ftlb 775 ftlb


1 1/8UNC 688 ftlb 1116 ftlb 1025 ftlb 1150 ftlb
1 1/4UNC 971 ftlb 1573 ftlb 1400 ftlb 1600 ftlb
1 1/2UNC 1690 ftlb 2738 ftlb 2600 ftlb 3250 ftlb
1/4UNF 8 ftlb 12 ftlb 12 ftlb 13 ftlb
5/16UNF 16 ftlb 23 ftlb 20 ftlb 23 ftlb
3/8UNF 31 ftlb 43 ftlb 35 ftlb 38 ftlb
7/16UNF 48 ftlb 67 ftlb 60 ftlb 65 ftlb
1/2UNF 73 ftlb 103 ftlb 95 ftlb 105ftlb
9/16UNF 105 ftlb 149 ftlb 135 ftlb 150 ftlb
5/8UNF 150 ftlb 207 ftlb 190 ftlb 205 ftlb
3/4UNF 260 ftlb 363 ftlb 330 ftlb 355 ftlb
7/8UNF 409 ftlb 577 ftlb 520 ftlb 585 ftlb
1”UNF 607 ftlb 859 ftlb 700 ftlb 900 ftlb
1 1/8UNF 771 ftlb 1251 ftlb 1150 ftlb 1325 ftlb
1 1/4UNF 1075 ftlb 1744 ftlb 1600 ftlb 1750 ftlb
1 1/2UNF 1900 ftlb 3083 ftlb 3300 ftlb 3650 ftlb

TIP
To avoid problems with failures of bolts always ensure that the hole it goes
through has a small
small chamfer to clear th
the
e radius under the bolt head. This will
make sure that the load is taken directly on the flat surface under the head.

You might also like