Scribd
Upload
87 views1 page

Checklist Ahu

This document is a checklist for conducting maintenance on air handling units (AHUs) and fan coil units (FCUs). It includes sections to record the equipment details, tasks checked and serviced, operating data, technician remarks, and sign-offs. Information to be documented includes equipment codes, brands, models, tasks like filter cleaning, coil inspection, electrical and control checks, measured operating parameters, and notes on repairs needed or completed. The signatures of technicians and client indicate completion and approval of the maintenance work.

Uploaded by

zerro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
87 views1 page

Checklist Ahu

This document is a checklist for conducting maintenance on air handling units (AHUs) and fan coil units (FCUs). It includes sections to record the equipment details, tasks checked and serviced, operating data, technician remarks, and sign-offs. Information to be documented includes equipment codes, brands, models, tasks like filter cleaning, coil inspection, electrical and control checks, measured operating parameters, and notes on repairs needed or completed. The signatures of technicians and client indicate completion and approval of the maintenance work.

Uploaded by

zerro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Location: AHU, FCU CHECKLIST

Date:

Carrier

Carrier

Carrier

Carrier
Carrier
(1) Equipment Code/Floor
(2)Brand
(3)Model

(1) (2) (3) (1) (2) (3) (1) (2) (3) (1) (2) (3) (1) (2) (3)
DESCRIPTION OF WORK
A) CHECKING & ADJUSTMENT
1) Check evaporator fan belt tension, condition &
alignment
2) Check evaporator blower fan blade condition
3) Check evaporator blower fan motor condition
4) Check evaporator fin condition
5) Check condition of piping, ducting & insulation
6) Check control panel condition
7) Check vibration & noise
8) Check drain pan / condenser drain for blockage
9) Check all bearing & moving parts
10) Check all electrical connections
11) Check & fine tune control valve, sensors & dampers
12) Check thermostats, safety cutouts, modulating
dampers & other automatic controls
13) Flushing piping system (Air vent)
14) Cleaning pipe strainer (if necessary)
B) SERVICING
1) Wipe blower unit
2) Wash air filter, replace if necessary
3) Clean drain pan tray
4) Tighten fan belt pulley
5) Water wash cooling coil
6) Comb dented fins of coils
7) Remove all unwanted materials
8) Grease all fan bearings & moving parts
9) Remove dirt & excessive grease
10) Tighten all electrical connections/motor terminal
11) Chemical wash the cooling coil (if necessary)
C) OPERATING DATA
1) Blower running amps (Amps)
2) Off Coil temperature (*C / "F) (Room Temperature)
3) High pressure (psi/bar)
4) Low pressure (psi/bar)
5) Compressor FLA (In Nameplate)
Compressor 1 (Amps)
Compressor 2 (Amps)
Compressor 3 (Amps)
D) TECHNICIAN REMARKS

Name of Technician 1: Sign


Name of Technician 2: Sign
Name of Technician 3: Sign

Action Code: A: Satisfactory C: Cleaned D: Done E: Repaired F: Follow Up N/A: Not Applicable

JKR’s Stamp & Signature: Client’s Stamp & Signature:

You might also like