ELECTRONICS HUB

PROJECTS | TUTORIALS | REVIEWS | KITS

Build Custom Cable Assemblies

OPEN
Get custom cable assemblies shipped to you in 5 days! Start building now. SV
Microwave

HOME PROJECTS MINI PROJECTS ARDUINO FREE CIRCUITS TUTORIALS SYMBOLS

DIY REVIEWS CONTACT US

YOU ARE HERE: HOME / GENERAL / 16 TYPES OF COMPUTER PORTS AND THEIR FUNCTIONS

16 Types of Computer Ports and Their

Functions
JANUARY 5, 2016 BY ADMINISTRATOR — 58 COMMENTS

A Computerr Port is an interface or a point of connection between the computer and its
peripheral devices. Some of the common peripherals are mouse, keyboard, monitor or
display unit, printer, speaker, flash drive etc.
The main function of a computer port is to act as a point of attachment, where the cable
from the peripheral can be plugged in and allows data to flow from and to the device.
A computer port is also called as a Communication Port as it is responsible for
communication between the computer and its peripheral device. Generally, the female
end of the connector is referred to as a port and it usually sits on the motherboard.

In Computers, communication ports can be divided into two types based on the type or
protocol used for communication. They are Serial Ports and Parallel Ports.

A serial port is an interface through which peripherals can be connected using a serial
protocol which involves the transmission of data one bit at a time over a single
communication line. The most common type of serial port is a D-Subminiature or a D-
sub connector that carry RS-232 signals.

A parallel port, on the other hand, is an interface through which the communication
between a computer and its peripheral device is in a parallel manner i.e. data is
transferred in or out in parallel using more than one communication line or wire. Printer
port is an example of parallel port.

The article gives a brief introduction to different types of ports along with their
applications.

Table of Contents 
1. PS/2
2. Serial Port
2.1. DB-25
2.2. DE-9 or RS-232 or COM Port
3. Parallel Port or Centronics 36 Pin Port
 4. Audio Ports
4.1. Surround Sound Connectors or 3.5 mm TRS Connector
5. S/PDIF / TOSLINK
6. Video Ports
6.1. VGA Port
7. Digital Video Interface (DVI)
7.1. Mini-DVI
7.2. Micro-DVI
8. Display Port
9. RCA Connector
10. Component Video
11. S-Video
12. HDMI
13. USB
13.1. USB Type A
13.2. USB Type C
14. RJ-45
15. RJ-11
16. e-SATA
17. Related Posts:

PS/2
PS/2 connector is developed by IBM for connecting mouse and keyboard. It was
introduced with IBM’s Personal Systems/2 series of computers and hence the name
PS/2 connector. PS/2 connectors are color coded as purple for keyboard and green for
mouse.

PS/2 is a 6-pin DIN connector. The pin out diagram of a PS/2 female connector is shown
below.
Even though the pinout of both mouse and keyboard PS/2 ports are same, computers do
not recognize the devise when connected to wrong port.

PS/2 port is now considered a legacy port as USB port has superseded it and very few of
the modern motherboards include it as a legacy port.

Serial Port
Even though the communication in PS/2 and USB is serial, technically, the term Serial
Port is used to refer the interface that is compliant to RS-232 standard. There are two
types of serial ports that are commonly found on a computer: DB-25 and DE-9.

DB-25

DB-25 is a variant of D-sub connector and is the original port for RS-232 serial
communication. They were developed as the main port for serial connections using RS-
232 protocol but most of the applications did not require all the pins.

Hence, DE-9 was developed for RS-232 based serial communication while DB-25 was
rarely used as a serial port and often used as a parallel printer port as a replacement of
the Centronics Parallel 36 pin connector.

DE-9 or RS-232 or COM Port

DE-9 is the main port for RS-232 serial communication. It is a D-sub connector with E
shell and is often miscalled as DB-9. A DE-9 port is also called as a COM port and allows
full duplex serial communication between the computer and it’s peripheral.

Some of the applications of DE-9 port are serial interface with mouse, keyboard, modem,
uninterruptible power supplies (UPS) and other external RS-232 compatible devices.

The pinout diagram of DE-9 port is shown below.

The use of DB-25 and DE-9 ports for communication is in decline and are replaced by
USBs or other ports.

Parallel Port or Centronics 36 Pin Port

Parallel port is an interface between computer and peripheral devices like printers with
parallel communication. The Centronics port is a 36 pin port that was developed as an
interface for printers and scanners and hence a parallel port is also called as a
Centronics port.

Before the wide use of USB ports, parallel ports are very common in printers. The
Centronics port was later replaced by DB-25 port with parallel interface.
Audio Ports
Audio ports are used to connect speakers or other audio output devices with the
computer. The audio signals can be either analogue or digital and depending on that the
port and its corresponding connector differ.

Surround Sound Connectors or 3.5 mm TRS Connector

It is the most commonly found audio port that can be used to connect stereo
headphones or surround sound channels. A 6 connector system is included on majority
of computers for audio out as well as a microphone connection.

The 6 connectors are color coded as Blue, Lime, Pink, Orange, Black and Grey. These 6
connectors can be used for a surround sound configuration of up to 8 channels.

S/PDIF / TOSLINK
The Sony/Phillips Digital Interface Format (S/PDIF) is an audio interconnect used in
home media. It supports digital audio and can be transmitted using a coaxial RCA Audio
cable or an optical fiber TOSLINK connector.

Most computers home entertainment systems are equipped with S/PDIF over TOSLINK.
TOSLINK (Toshiba Link) is most frequently used digital audio port that can support 7.1
channel surround sound with just one cable. In the following image, the port on the right
is an S/PDIF port.

Video Ports
VGA Port

VGA port is found in many computers, projectors, video cards and High Definition TVs. It
is a D-sub connector consisting of 15 pins in 3 rows. The connector is called as DE-15.

VGA port is the main interface between computers and older CRT monitors. Even the
modern LCD and LED monitors support VGA ports but the picture quality is reduced.
VGA carries analogue video signals up to a resolution of 648X480.

With the increase in use of digital video, VGA ports are gradually being replaced by HDMI
and Display Ports. Some laptops are equipped with on-board VGA ports in order to
connect to external monitors or projectors. The pinout of a VGA port is shown below.
Digital Video Interface (DVI)
DVI is a high speed digital interface between a display controller like a computer and a
display device like a monitor. It was developed with an aim of transmitting lossless digital
video signals and replace the analogue VGA technology.

There are three types of DVI connectors based on the signals it can carry: DVI-I, DVI-D
and DVI-A. DVI-I is a DVI port with integrated analogue and digital signals. DVI-D supports
only digital signals and DVI-A supports only analogue signals.

The digital signals can be either single link or dual link where a single link supports a
digital signal up to 1920X1080 resolution and a dual link supports a digital signal up to
2560X1600 resolution. The following image compares the structures of DVI-I, DVI-D and
DVI-A types along with the pinouts.
Mini-DVI

Mini-DVI port is developed by Apple as an alternative to Mini-VGA port and is physically

similar to one. It is smaller than a regular DVI port.

It is a 32 pin port and is capable of transmitting DVI, composite, S-Video and VGA signals
with respective adapters. The following image shows a Mini-DVI port and its compatible
cable.

Micro-DVI

Micro-DVI port, as the name suggests is physically smaller than Mini-DVI and is capable
of transmitting only digital signals.

This port can be connected to external devices with DVI and VGA interfaces and
respective adapters are required. In the following image, a Micro-DVI port can be seen
adjacent to headphone and USB ports.
Display Port
Display Port is a digital display interface with optional multiple channel audio and other
forms of data. Display Port is developed with an aim of replacing VGA and DVI ports as
the main interface between a computer and monitor.

The latest version DisplayPort 1.3 can handle a resolution up to 7680 X 4320.

The Display Port has a 20 pin connector, which is a very less number when compared to
DVI port and offers better resolution. The pin out diagram of a Display Port is shown
below.

RCA Connector
RCA Connector can carry composite video and stereo audio signals over three cables.
Composite video transmits analogue video signals and the connector is as yellow
colored RCA connector.

The video signals are transmitted over a single channel along with the line and frame
synchronization pulses at a maximum resolution of 576i (standard resolution).

The red and white connectors are used for stereo audio signals (red for right channel and
white for left channel).

Component Video
Component Video is an interface where the video signals are split into more than two
channels and the quality of the video signal is better that Composite video.
Like composite video, component video transmits only video signals and two separate
connectors must be used for stereo audio. Component video port can transmit both
analogue and digital video signals.

The ports of the commonly found Component video uses 3 connectors and are color
coded as Green, Blue and Red.

S-Video
S-Video or Separate Video connector is used for transmitting only video signals. The
picture quality is better than that of Composite video but has a lesser resolution than
Component video.

The S-Video port is generally black in color and is present on all TVs and most
computers. S-Video port looks like a PS/2 port but consists of only 4 pins.
Out of the 4 pins, one pin is used to carry the intensity signals (black and white) and
other pin is used to carry color signals. Both these pins have their respective ground pins.
The pinout diagram of an S-Video port is shown below.

HDMI
HDMI is an abbreviation of High Definition Media Interface. HDMI is a digital interface to
connect High Definition and Ultra High Definition devices like Computer monitors,
HDTVs, Blu-Ray players, gaming consoles, High Definition Cameras etc.

HDMI can be used to carry uncompressed video and compressed or uncompressed

audio signals. The HDMI port of type A is shown below.
The HDMI connector consists of 19 pins and the latest version of HDMI i.e. HDMI 2.0 can
carry digital video signal up to a resolution of 4096×2160 and 32 audio channels. The
pinout diagram of an HDMI port is as follows.

USB
Universal Serial Bus (USB) replaced serial ports, parallel ports, PS/2 connectors, game
ports and power chargers for portable devices.

USB port can be used to transfer data, act as an interface for peripherals and even act as
power supply for devices connected to it. There are three kinds of USB ports: Type A,
Type B or mini USB and Micro USB.

USB Type A

USB Type-A port is a 4 pin connector. There are different versions of Type – A USB ports:
USB 1.1, USB 2.0 and USB 3.0. USB 3.0 is the common standard and supports a data
rate of 400MBps.

USB 3.1 is also released and supports a data rate up to 10Gbps. The USB 2.0 is Black
color coded and USB 3.0 is Blue. The following image shows USB 2.0 and USB 3.0 ports.

The pinout diagram of USB Type – A port is shown below. The pinout is common to all
standards of Type – A.
USB Type C

USB Type – C is the latest specification of the USB and is a reversible connector. USB
Type – C is supposed to replace Types A and B and is considered future proof.

The port of USB Type – C consists of 24 pins. The pinout diagram of USB Type – C is
shown below. USB Type – C can handle a current of 3A.

This feature of handling high current is used in the latest Fast Charging Technology
where a Smart Phone’s battery will reach its full charge is very less time.
RJ-45
Ethernet is a networking technology that is used to connect your computer to Internet
and communicate with other computers or networking devices.

The interface that is used for computer networking and telecommunications is known as
Registered Jack (RJ) and RJ – 45 port in particular is used for Ethernet over cable. RJ-45
connector is an 8 pin – 8 contact (8P – 8C) type modular connector.

The latest Ethernet technology is called Gigabit Ethernet and supports a data transfer
rate of over 10Gigabits per second. The Ethernet or a LAN port with 8P – 8C type
connector along with the male RJ-45 cable is shown below.

The un-keyed 8P – 8C modular connector is generally referred to the Ethernet RJ-45.

Often, RJ-45 ports are equipped with two LEDs for indicating transmission and packet
detection.

As mentioned earlier, an Ethernet RJ-45 port has 8 pins and the following picture depicts
the pinout of one.

RJ-11
RJ-11 is another type of Registered Jack that is used as an interface for telephone,
modem or ADSL connections. Even though computers are almost never equipped with
an RJ-11 port, they are the main interface in all telecommunication networks.

RJ-45 and RJ11 ports look alike but RJ-11 is a smaller port and uses a 6 point – 4
contact (6P – 4C) connector even though a 6 point – 2 contact (6P – 2C) is sufficient.
The following is a picture of an RJ-11 port and its compatible connector.

The following image can be used to compare RJ-45 and RJ-11 ports.

e-SATA
e-SATA is an external Serial AT Attachment connector that is used as an interface for
connecting external mass storage devices. Modern e-SATA connector are called e-SATAp
and stands for Power e-SATA ports.

They are hybrid ports capable of supporting both e-SATA and USB. Neither the SATA
organization nor the USB organization has officially approved the e-SATAp port and must
be used at user’s risk.
The above image is of an e-SATAp port. It shows that both e-SATA and USB devices can
be connected.

Related Posts:
8051 Microcontroller Architecture
USB LED Lamp Circuit
RS232 Protocol – Basics
Raspberry Pi RFID Reader Interface
Basics of UART Communication
8051 Microcontroller Pin Diagram and Pin Description

FILED UNDER: GENERAL