0% found this document useful (0 votes)
17 views3 pages

CM24064 11sldaa 5

This document provides the specifications for the CM24064-11SLDAA-5 LCD module. It includes the mechanical specifications such as the dot matrix, viewing area, and dot size. It also includes diagrams of the module dimensions and pin connections. The interface pin functions and absolute maximum ratings are defined.

Uploaded by

José SCOURNEAU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views3 pages

CM24064 11sldaa 5

This document provides the specifications for the CM24064-11SLDAA-5 LCD module. It includes the mechanical specifications such as the dot matrix, viewing area, and dot size. It also includes diagrams of the module dimensions and pin connections. The interface pin functions and absolute maximum ratings are defined.

Uploaded by

José SCOURNEAU
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CM24064-11SLDAA-5

SHENZHEN BRILLIANT CRYSTAL TECHNOLOGIC CO.,LTD.

深 圳 市 彩 晶 科 技 有 限 公 司

The specification for the following models:


CM24064-11SLDAA-5

PROPOSED BY APPROVED
Design Approved

TEL:+86-755-29995238 FAX:+86-755-29459900

Http://www.cj86.com E-mail:[email protected]

Http://www.szcm-lcd.com E-mail:[email protected]

第 1 页 共 3 页
CM24064-11SLDAA-5
1. Mechanical Specification

ITEM STANDARD VALUE UNIT


Dot Matrix 240 X 64 DOTS --
MODULE DIMENSION 180.0 (W) X 62.0 (H) X 11.8 (T) mm
VIEWING DISPLAY AREA 132.0 (W) X 39.0 (H) mm
ACTIVE DISPLAY AREA 127.16 (W) X 33.88 (H) mm
DOT SIZE 0.49 (W) X 0.49 (H) mm
DOT PITCH 0.04 (W) X 0.04 (H) mm
DRIVE METHOD 1/64 Duty , 1/9 BIAS
VIEWING DIRECTION 6 O‘clock
LCD type STN yellowgreen
Display mode positive
LED Backlight Color Yellow Green
Backlight Input DC +5.0V V
LED backlight current 90 mA
Backlight Half-Lift Time 35,000 HR.
INPUT VOLAGE DC +5.0V V mA
LCD DRIVER T6963C
Weight 157g

2. Mechanical Diagram

客户确认签名:
K
A

CM24064-11

VEE WR AD0/AD12 SEG DRV SEG DRV


SRAM

SEG DRV
D0/D7
RD R/W
1 2 3

VEE-V0 CE
32K

CE

DB0/DB7
V0 VR -10V C/D
RES
T6963C
LCD PANER
240×64 DOTS
深圳市彩晶科技有限公司
VSS 图纸名称: 图纸编号: 生效日期:
(GND) VSS Power /6
COM DRW
外型尺寸图
supply
VDD
VR:50K VEE
circuit
产品型号: 客户编号: 版本:
CM24064-11 A
Termlnal: 设计: 日期: 审核: 日期:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
批准: 日期:
FG VSS VDD VO /WR /RD /CS C/D NC RET DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 FS VEE LEDA LEDK 第一 页/共 一页

第 2 页 共 3 页
CM24064-11SLDAA-5
3. Interface Pin Connections
NO SYMBOL LEVEL FUNCTION
1 FG 0V Frame ground
2 VSS 0V Ground
3 VDD 5.0V Supply voltage for logic
4 V0 -4V∽-5V Operating voltage for LCD drive

5 /WR L Write signal

6 /RD L Read signal

7 /CE L Chip enable signal


8 C/D H/L H: Instruction code L: Data
9 NC
10 /RESET L Reset signal
11 DB0 H/L Data bit 0
12 DB1 H/L Data bit 1
13 DB2 H/L Data bit 2
14 DB3 H/L Data bit 3
15 DB4 H/L Data bit 4
16 DB5 H/L Data bit 5
17 DB6 H/L Data bit 6
18 DB7 H/L Data bit 7
19 FS H/L Font select signal (H:5X8 dots; L:8X8 dots)
20 VEE -5V Negative Voltage for LCD driver
21 LEDA +5V LED Backlight
22 LEDK 0V LED Backlight

4. Absolute Maximum Ratings

ITEM SYMBOL MIN. TYPE MAX. UNIT


OPERATING TEMPERATURE TOP 0/-20 -- +50/+70 ℃
STORAGE TEMPERATURE TST -10/-30 -- +60/+80 ℃
INPUT VOLAGE VI 4.75 5.0 5.25 V
SUPPLY VOLTAGE FOR LOGIC VDD-VSS -- 5.0 5.5 V
SUPPLY VOLTAGE FOR LCD VDD-VO -- -- 9.8 V
STATIC ELECTRICITY Be sure that you are grounded when handing LCM.

第 3 页 共 3 页

You might also like