Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    JYQD V7.0 English

    Uploaded by

    mehmet
    The document summarizes a brushless DC motor driver board model JYQD-V7.0. It can operate motors from -20°C to 85°C, with input voltages of 12V or 24V, currents up to 3A continuous and 2A maximum. Speed is regulated through either PWM signals from 1-20kHz or analog voltage from 0-5V. It has ports for motor phases, Hall sensors, control signals, and power. Wiring diagrams and guidelines are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    JYQD V7.0 English

    Uploaded by

    mehmet
    21 views3 pages
    The document summarizes a brushless DC motor driver board model JYQD-V7.0. It can operate motors from -20°C to 85°C, with input voltages of 12V or 24V, currents up to 3A continuous and 2A maximum. Speed is regulated through either PWM signals from 1-20kHz or analog voltage from 0-5V. It has ports for motor phases, Hall sensors, control signals, and power. Wiring diagrams and guidelines are provided.

    Original Title

    JYQD-V7.0-English

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes a brushless DC motor driver board model JYQD-V7.0. It can operate motors from -20°C to 85°C, with input voltages of 12V or 24V, currents up to 3A continuous and 2A maximum. Speed is regulated through either PWM signals from 1-20kHz or analog voltage from 0-5V. It has ports for motor phases, Hall sensors, control signals, and power. Wiring diagrams and guidelines are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views3 pages

    JYQD V7.0 English

    Uploaded by

    mehmet
    The document summarizes a brushless DC motor driver board model JYQD-V7.0. It can operate motors from -20°C to 85°C, with input voltages of 12V or 24V, currents up to 3A continuous and 2A maximum. Speed is regulated through either PWM signals from 1-20kHz or analog voltage from 0-5V. It has ports for motor phases, Hall sensors, control signals, and power. Wiring diagrams and guidelines are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    JYQD-V7.

    0
    7.0 brushless DC motor driver board

    CONTINUOUS
    OPERATING OPERATING MAX PWM SPEED ANALOG
    OPERATING ERROR
    MODEL TEMPERATURE VOLTAGE CURRENT REGULATION VOLTAGE SPEED
    CURRENT LED
    （℃） （V） (A) (1-20KHZ) REGULATION (V)
    （A）

    Duty cycle
    JYQD-V7.0 -20—85℃ 12V 3A 2A 0-5V √
    0-100%

    Duty cycle
    JYQD-V7.0 -20-85℃ 24V 3A 2A 0-5V √
    0-100%

    Application guidelines
    1. Confirm that the voltage and power parameters of the motor not exceed the range as specified
    specified.

    2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding,

    you can adjust the Hall


    all line sequence or motor three-phase
    three phase line sequence according to the actual situation, to achieve
    the best driving effect.
    3. JYQD-V7.0
    7.0 is driver board without housing and heatsink, it can drive the motor below 36 watt without any heatsink, but
    needs normal ventilation.
    4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to
    external potentiometer or switch for speed adjustment,
    adjustment commutation and enabling operation
    Wiring diagram

    1. Control port

    5V — Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing

    operation

    Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or

    connect to GND is reverse direction.

    VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with

    GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

    SC—Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.

    GND—Used for Drive board internal control

    2. Power port
    MA ----motor phase A
    MB ---- motor phase B
    MC---- motor phase C
    GND----DC-
    VCC----DC +
    3:Hall sensor port
    Ha--- Hall a
    Hb---Hall b
    Hc---Hall c
    GND---GND
    5V---5V output
    4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal
    driving, affecting the normal use.
    5. Control port distance: 2.54mm,Power port distance:2.54 mm
    6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
    Dimensional drawing

    You might also like