0% found this document useful (0 votes)
17 views41 pages

For Sync Class - Module 2 Part 2

- 8-PSK modulation encodes digital data in the phase of the transmitted signal using 8 different phases. It operates on groups of 3 input bits (tribits) at a time. The I and Q bits determine the phase polarity while the C bit determines the output magnitude. - For a tribit input of 010, the output phase of the 8-PSK transmitter would be -67.5 degrees. - 16-QAM modulation encodes digital data in both the amplitude and phase of the transmitted signal. It operates on groups of 4 input bits (quadbits) at a time, with the I and Q bits determining the phase polarity and the I' and Q' bits determining the amplitude.

Uploaded by

teodoro kubaron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views41 pages

For Sync Class - Module 2 Part 2

- 8-PSK modulation encodes digital data in the phase of the transmitted signal using 8 different phases. It operates on groups of 3 input bits (tribits) at a time. The I and Q bits determine the phase polarity while the C bit determines the output magnitude. - For a tribit input of 010, the output phase of the 8-PSK transmitter would be -67.5 degrees. - 16-QAM modulation encodes digital data in both the amplitude and phase of the transmitted signal. It operates on groups of 4 input bits (quadbits) at a time, with the I and Q bits determining the phase polarity and the I' and Q' bits determining the amplitude.

Uploaded by

teodoro kubaron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 41

DIGITAL COMMUNICATIONS /

COMMUNICATIONS 2
• 8 possible output phases (M=8)

• incoming bits are grouped into tribits (N=3)

• I (In-phase) and Q (Quadrature) bits determine the


polarity of the output

• C or control bit determines the magnitude of the


output.
• The output of I and Q level converters can never have
the same magnitude but can have the same polarity.

• Polarity:
Logic 1 = +V Logic 0 = -V

• Magnitude:
Logic 1 = 1.307 V Logic 0 = 0.541 V
• Baud rate: • Highest Fundamental
𝒇𝒃 Frequency:
𝒃𝒂𝒖𝒅 =
𝟑 𝒇𝒃
𝒇𝒂 =
• Bandwidth 𝟔
𝒇𝒃
𝐁=
𝟑
For a tribit input of 010, determine the output phase for the 8-PSK transmitter.

Ans. -67.5 degrees


• It is a form of digital modulation whose digital
information is contained in both the amplitude and
the phase of the transmitted carrier.

• It reduces the possibility of errors.

• More efficient than FSK and QPSK but more


susceptible to noise
• There are two possible output magnitudes and 4
possible output phases.

• I and Q bits determine the polarity while the C bit


determines the magnitude.

• The magnitude of I and Q PAM signals are always


equal.
• Baud rate: • Highest Fundamental
𝒇𝒃 Frequency:
𝒃𝒂𝒖𝒅 =
𝟑 𝒇𝒃
𝒇𝒂 =
• Bandwidth 𝟔
𝒇𝒃
𝐁=
𝟑
For a tribit input of Q = 0, I = 0, and C = 0 (000), determine the output amplitude and phase
for the 8-QAM transmitter

Ans. 0.765 V, -135 degrees


16-PSK

Digital Modulation
• It is an M-ary encoding technique where M=16.

• There are 16 different output phases possible.

• Acts on the incoming data in groups of 4 bits, called


quadbits.

Digital Modulation
Digital Modulation
Digital Modulation
• Bandwidth: • Highest Fundamental
𝒇𝒃 Frequency:
𝑩= 𝒇𝒃
𝟒
𝒇𝒂 =
• Baud Rate: 𝟖
𝒇𝒃
𝐛𝐚𝐮𝐝 =
𝟒

Digital Modulation
• The output does not change until 4 bits (quadbit)
enter the modulator.

• 16-PSK is highly susceptible to phase impairments


introduced in the transmission medium, and hence,
seldom used.

• It can undergo only 11.25° of phase shift to retain its


integrity.

Digital Modulation
16-QAM

Digital Modulation
Digital Modulation
• I and Q bits determine the polarity while I’ and Q’
determine the magnitude

• Polarity:
Logic 1 = +V Logic 0 = -V

• Magnitude:
Logic 1 = 0.821 V Logic 0 = 0.22 V

Digital Modulation
Digital Modulation
Digital Modulation
Digital Modulation
• Bandwidth: • Highest Fundamental
𝒇𝒃 Frequency:
𝑩= 𝒇𝒃
𝟒
𝒇𝒂 =
• Baud Rate: 𝟖
𝒇𝒃
𝐛𝐚𝐮𝐝 =
𝟒

Digital Modulation
For a quadbit input of I = 0, I’ = 0, Q = 0, and Q’ = 1 (0100),
determine the output amplitude and phase for the 16-
QAM modulator.

Ans. 0.850 V, -105 degrees


Digital Modulation
For a 16-QAM modulator with an input data rate equal to
10 Mbps and a carrier frequency of 70 MHz, determine
the minimum double-sided Nyquist frequency and the
baud.

Ans. 2.5 MHz, 2.5 Megabaud

Digital Modulation
• It is used to compare the performance of one digital
modulation technique to another.

• Generally normalized to a 1-Hz bandwidth.

• Sometimes called information density or spectral


efficiency.
𝒇𝒃
𝑩𝜼 =
𝑩
where:
𝑩𝜼 = bandwidth efficiency (bps/Hz or bits/cycle)
𝒇𝒃 = transmission bit rate (bps)
𝑩 = minimum bandwidth (Hz)
For an 8-QAM system, operating with an information bit rate of 24 kbps, determine (a) baud,
(b) minimum bandwidth, and (c) bandwidth efficiency.

Ans. 8 kilobaud, 8 kHz, 3 bits/cycle


For 16-PSK and a transmission system with a 20 kHz
bandwidth, determine the maximum bit rate.

Ans. 80kbps

Digital Modulation
[1] Ampoloquio, J. M. (2005). Self-Sufficient Guide to Electronic Communications Engineering.
[2] Beasley, Jeffrey. (2014) Electronic Communications. Pearson.
[3] Frenzel, Louis. (2016) Principles of Electronic Communication Systems. Mc Graw Hill Higher
Education. 4th Edition
[4] Gupta. (2016) An Integrated Course in Electronics and Communication Engineering. S. K. Kataria
& Sons
[5] Ha, Tri. T. (2011) Theory and Design of Digital Communication Systems. Cambridge University
Press
[6] Meadows, Jennifer H. (2018) Communication Technology Update and Fundamentals. Routledge.
[7] Rice, Michael. (2018) Digital Communications: A Discrete-Time Approach
[8] Sharma, Sanjay. (2015) Digital Communications. S. K. Kataria & Sons
[9] Sklar, Bernard. (2009) Digital Communications: Fundamentals and Applications. Aitbs India. 2nd
Edition
[10] Tomasi, W. (2014). Advanced Electronic Communications Systems. Harlow: Pearson Education
Limited.
QUESTIONS?

You might also like