YMC PIEZOTRONICS INC. Catalog 2022

INDEX
1. Piezoelectric Vibration Accelerometer ............................................. 3

1.1 High Shock Accelerometer ............................................................... 3
1.2 General Purpose Accelerometer ...................................................... 5
1.3 High Sensitivity Accelerometer ....................................................... 9
1.4 Miniature Accelerometer ............................................................... 10
1.5 Industrial IEPE Accelerometer (Status Monitoring)...................... 13
1.6 Standard Sensor ............................................................................. 16
1.7 High Temperture Accelerometer .................................................... 17
1.8 Water–proof Accelerometer........................................................... 18
1.9 MEMS Accelerometer (DC Response) .......................................... 19
2. Piezoelectric Vibration Velocity Sensor ......................................... 20
3. Proximity (Eddy) Displacement Sensor ......................................... 22
4. Quartz Dynamic Force Sensor & Impedance Head .................... 22
4.1 Dynamic Force Sensor (compression only): Side Output.............. 22
4.2 General Purpose Dynamic Force Sensor (tension/compression) ... 23
4.3 Dynamic Force Sensor (compression only): Top Output .............. 23
4.4 Dynamic Force Sensor: Force Ring ............................................... 24
4.5 Triaxial Dynamic Force Sensor ..................................................... 24
4.6 Impedance Head (Force +Acceleration) ........................................ 25
5. Quartz Dynamic Pressure Sensor .................................................. 25
6. Signal Conditioners ........................................................................... 26
6.1 Charge Amplifiers .......................................................................... 26
6.2 IEPE Signal Conditioners ............................................................ 27
6.3 Miniature Impedance Convertor (2–wire Miniature Charge
Amplifier) ................................................................................................ 28
6.4 Dynamic Strain Amplifier.............................................................. 28
7 Dynamic Data Acquisition System ................................................. 29
7.1 Dynamic Data Collector ................................................................ 29
7.2 Portable Multi–channel Data Acquisition System ......................... 30
7.3 Signal Test and Modal Analysis Software ..................................... 30
8 Exciter & Calibrator System............................................................. 32
8.1 Signal Generator ............................................................................ 32
8.2 Linear Power Amplifier ................................................................. 32
8.3 Impact Hammer ............................................................................. 33
8.4 Modal Shaker ................................................................................. 34
8.5 Small Exciter.................................................................................. 35
8.6 Standard Exciter ............................................................................. 35
8.7 Portable Vibration Calibrator ......................................................... 36
8.8 IEPE Sensor Simulator .................................................................. 36
8.9 Precision Capacitance Calibration and Charge Attenuator ............ 36
8.10 Vibration/Shock Measurement & Calibration System ............... 37
9 Cables & Accessories....................................................................... 39
9.1 Cables............................................................................................. 39
9.2 Adaptors ......................................................................................... 39
9.3 Cable Connectors ........................................................................... 40
9.4 Mounting Studs & Stud Adaptors .................................................. 40
9.5 Mounting Studs with Flange .......................................................... 41
9.6 Mounting Blocks............................................................................ 41
9.7 Insulated Magnets .......................................................................... 42
9.8 Patch Panel and Multi–conductor Cable ........................................ 42
9.9 Connector Kit ................................................................................. 42
2
Vibration Sensors, Shakers & Instruments
1. Piezoelectric Vibration Accelerometer

1.1 High Shock Accelerometer
YMC Series the High Shock Accelerometer is specifically designed to withstand and measure extremely
high–amplitude, transient acceleration of short duration. This series features high stiffness, quick response and
high value of acceleration. It is widely applied in drop & impact testing and explosive studies etc. Measuring range
is from 1000 to 100000g.
1.1.1 High Shock PE Accelerometer

High Shock High Shock with Isolation
General Shock Tri–axial Shock
211A01Z,211A02Z 211A01G,211A02G
222A02 247A01,247A02
211A05Z,211A10Z 211A05G,211A10G
211A01Z 211A02Z 211A05Z 211A10Z

Model:YMC 222A02 247A01 247A02
211A01G 211A02G 211A05G 211A10G
Sensitivity pC/g 1.8 1.2 0.65 0.17 0.13 1 0.5
Measuring Range g pk ±5000 ±10000 ±20000 ±50000 ±100000 ±5000 ±10000
Non–linearity % ±5 ±5 ±10 ±10 ±10 ±5 ±5
Frequency 12,000 12,000 12,000 12,000

Hz 10,000 8,000 8,000
Range (±1dB) 10,000 10,000 10,000 10,000
Resonant
kHz 40 40 40 40 40 30 30
Frequency
Temperature
℃ –40 – +65 –40 – +65 –40 – +65 –40 – +65 –40 – +65 –40 – +65 –40 – +65
Range
Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/
Sensing Element
Shear Shear Shear Shear Shear Shear Shear
Integral Integral Integral Integral Integral
Output Connector Integral Cable Integral Cable
Cable Cable Cable Cable Cable
－－－－
Case/Ground Case/Ground
Electronic
Ω － Case Case Case Case Isolation Isolation
Isolation Isolation Isolation Isolation Isolation ≥109 ≥109
≥109 ≥109 ≥109 ≥109
High Strength High Strength High Strength High Strength High Strength
Stainless Steel Stainless Steel Stainless Steel Stainless Steel High Strength High Strength
Housing Material Stainless
Stainless Steel Stainless Steel
Steel Titanium Titanium Titanium Titanium
Sealing Epoxy Glue Welded Welded Welded Welded Epoxy Glue Epoxy Glue
Weight g 10 10 10 10 10 40 40
Φ12╳20 Φ12╳20 Φ12╳20 Φ12╳20

Size mm Φ12.9╳17.3 22×22×12 22×22×12
Φ12╳24.5 Φ12╳24.5 Φ12╳24.5 Φ12╳24.5
Mounting M5(Female) M6×0.75(Male) M6×0.75(Male) M6×0.75(Male) M6×0.75(Male) (2)Φ5(Thru–hole) (2)Φ5(Thru–hole)
P3
YMC PIEZOTRONICS INC. Addr.: No.47 Xiangyun Road Yangzhou City, China Post Code:225009
Email:[email protected] Tel: 86–514–87960802 Fax: 86–514–87960681
1.1.2 High Shock IEPE Accelerometer

General Shock General Shock High Shock High Shock with Isolation
121A01,121A02,121A05 122A01,122A02,122A05 111A01Z,111A02Z,111A05Z 111A01G,111A02G,111A05G
121A01 121A02 121A05 111A01Z 111A02Z 111A05Z

Model:YMC
122A01 122A02 122A05 111A01G 111A02G 111A05G
Sensitivity(±10%) mV/g 1 2 5 0.5 0.25 0.1
Measuring Range g pk ± 5000 ± 2500 ± 1000 ± 10000 ± 20000 ± 50000
Resolution mg rms 20 10 5 50 100 200
1 – 12,000 1 – 12,000 1 – 12,000

Frequency Range
Hz 1 – 10,000 1 – 10,000 1 – 10,000
(±1dB)
1 – 10,000 1 – 10,000 1 – 10,000
Resonant
kHz 40 40 40 40 40 40
Frequency
Temperature
℃ –40 – +121 –40 – +121 –40 – +121 –40 – +70 –40 – +70 –40 – +70
Range
Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/
Sensing Element
Shear Shear Shear Shear Shear Shear
M5 Top M5 Top M5 Top
Integral Cable Integral Cable Integral Cable
Output Connector
/M5 /M5 /M5
M5 Side M5 Side M5 Side
－－－
Electronic
Ω －－－
Isolation Case Isolation Case Isolation Case Isolation
≥109 ≥109 ≥109
High Strength High Strength High Strength
High Strength High Strength High Strength Stainless Steel Stainless Steel Stainless Steel
Housing Material Stainless Stainless Stainless
Steel Steel Steel Titanium Titanium Titanium
Sealing Epoxy Glue Epoxy Glue Epoxy Glue Welded Welded Welded
Weight g 10 12 12 10 10 10
Φ11╳21.3 Φ11╳21.3 Φ11╳21.3 Φ12╳20 Φ12╳20 Φ12╳20

Size mm
Φ11╳16.3 Φ11╳16.3 Φ11╳16.3 Φ12╳24.5 Φ12╳24.5 Φ12╳24.5
Mounting M5(Female) M5(Female) M5(Female) M5(Male) M5(Male) M5(Male)
Note:
1. Model end with “G”: case isolation.
2. Model end with “Z”: integral cable.
3. Over 10000g, recommend integral cable.
P4
1.2 General Purpose Accelerometer
YMC Series the General Purpose Accelerometer is designed by piezoelectric effect. Two output mode: high
impedance output type (PE Mode) and low impedance voltage output type (IEPE Mode). This series is applied for
structural testing, vibration control & testing, drop testing, quality testing, mechanical equipment study, modal
vibration testing etc.
1.2.1 General Purpose Single Axial PE Accelerometer
221A10,221A25 221A50,221A100 221A200,221A500 221A1000
Single Axis & High Stability

YMC2106C: PE Mode
Please see: Model 222A25
222A10,222A25 222A50,222A100 222A200,222A500 222A1000
221A10 221A25 221A50 221A100 221A200 221A500 221A1000

Model:YMC
222A10 222A25 222A50 222A100 222A200 222A500 222A1000
Sensitivity pC/g 10 25 50 100 200 500 1200
±5% Hz 10k 8k 5k 5k 3k 2k 1.5k

Frequency
Range
±10% Hz 12k 10k 6k 6k 4k 3k 2k
Resonant
kHz 40 30 25 25 20 15 10
Frequency
Temperature
℃ –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150
Range
Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/ Ceramic/
Sensing Element
Shear Shear Shear Shear Shear Shear Shear
M5 Top M5 Top M5 Top M5 Top M5 Top M5 Top M5 Top
Output Connector
M5 Side M5 Side M5 Side M5 Side M5 Side M5 Side M5 Side
Stainless Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel Steel
Sealing Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue
9.5 9.5 18 18 28 40 108

Weight g
12 12 20 20 30 57 115
Φ13╳26 Φ13╳26 Φ16.2╳27 Φ16.2╳27 Φ18╳28 Φ18╳28 Φ26╳35

Size mm
Φ13╳20 Φ13╳20 Φ16.2╳21 Φ16.2╳21 Φ18╳26 Φ18╳26 Φ26╳30
Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)
P5
1.2.2 General Purpose Single Axial IEPE Accelerometer
121A10,121A25 121A50,121A100 121A200,121A500 121A1000
122A10,122A25 122A50,122A100 122A200,122A500 122A1000
121A10 121A20 121A50 121A100 121A200 121A500 121A1000

Model:YMC
122A10 122A20 122A50 122A100 122A200 122A500 122A1000
Sensitivity(±10%) mV/g 10 20 50 100 200 500 1000
Resolution mg rms 2.5 1.5 1 0.5 0.2 0.1 0.05
±5% Hz 1 – 10k 1 – 10k 1 – 8k 1 – 8k 0.5 – 6k 0.5 – 3k 0.3 – 2k

Frequency
Range
±10% Hz 2 – 12k 2 – 12k 0.5 – 10k 0.5 – 10k 0.3 – 8k 0.3 – 3.5k 0.2 – 2.5k
Resonant Frequency kHz 40 40 30 25 15 15 10

Temperature
℃ –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121
Range
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear /Shear
M5 Top M5 Top M5 Top M5 Top M5 Top M5 Top M5 Top
Output Connector
M5 Side M5 Side M5 Side M5 Side M5 Side M5 Side M5 Side
Stainless Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel Steel
Epoxy Epoxy Epoxy Epoxy Epoxy Epoxy Epoxy
Sealing
Glue Glue Glue Glue Glue Glue Glue
9.5 9.5 18 18 28 40 108
Weight g
12 12 20 20 30 57 115
Φ11╳21.3 Φ11╳21.3 Φ13╳22 Φ13╳22 Φ18╳28 Φ18╳28 Φ26╳35

Size mm
Φ11╳16.3 Φ11╳16.3 Φ13╳18 Φ13╳18 Φ18╳26 Φ18╳26 Φ26╳30
Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)
P6
1.2.3 General Purpose Triaxial PE Accelerometer
YMC 242A Series YMC 243A Series YMC 245A Series
Model:YMC 242A02 242A05 243A10 243A20 245A10 245A20 245A50
Sensitivity pC/g 2 5 10 20 10 20 50
±5% Hz 6k 6k 5k 5k 4k 3k 2k
Frequency
Range
±10% Hz 8k 8k 6k 6k 5k 4.5k 3k
Temperature Range ℃ –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic

Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear /Shear
Output Connector (3) M5 (3) M5 (3) M5 (3) M5 (3) M5 (3) M5 (3) M5
Stainless Stainless Stainless Stainless
Housing Material Titanium Titanium Titanium
Steel Steel Steel Steel
Sealing
Weight g 37 37 44 44 44 44 44
Size mm 22╳22╳12 22╳22╳12 25.4╳22╳13 25.4╳22╳13 28╳28╳16 28╳28╳16 32╳32╳18.8
Φ5(Thru–hole)/M6 Thread(bottom)(Z axial)

Mounting (2) Φ5 (Thru–hole) (2) Φ3 (Thru–hole)
(2) M5(Female)(X,Y axial)
P7
1.2.4 General Purpose Triaxial IEPE Accelerometer
YMC 143A Series YMC 145A Series YMC 145A200
Model:YMC 143A10 143A20 143A50 145A10 145A20 145A50 145A100 145A200
Sensitivity(±10%) mV/g 10 20 50 10 20 50 100 200
Measuring Range g pk ±500 ±250 ±100 ±500 ±250 ±100 ±50 ±25
Resolution mg rms 2.5 1.5 1 0.5 0.2 0.1 0.05 0.15
±5% Hz 1 – 5k 1 – 5k 1 – 5k 1 – 5k 1 – 3k 1 – 2k 0.5 – 2k 0.3 – 500

Frequency
Range
±10% Hz 0.5 – 6k 0.5 – 6k 0.5 – 6k 0.5 – 6.5k 0.5 – 4.5k 0.5 – 3k 0.3 – 3k 0.2 – 800
Resonant
kHz 20 20 20 15 15 15 10 10
Frequency
Temperature
℃ –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40 – +85
Range
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear /Shear /Shear
Output Connector 1/4–28 1/4–28 1/4–28 (3) M5 (3) M5 (3) M5 (3) M5 X12J6A
Stainless Stainless Stainless
Housing Material Titanium Titanium Titanium Titanium LY12
Steel Steel Steel
Sealing Epoxy Glue
Weight g 40 40 40 45 45 45 45 355
25.4╳22 25.4╳22 25.4╳22 25.4╳ 25.4╳ 25.4╳ 25.4╳

Size mm 65╳50╳50
╳11 ╳11 ╳11 25.4╳14 25.4╳14 25.4╳14 25.4╳14
Φ5(Thru–hole)/M6 Thread(bottom)(Z axial)
Mounting (2) Φ2.5(Thru–hole) (2) M5(Female)(X,Y axial)
M5(Female)
Note:
YMC145A200: Power Supply :±4VDC – ±15VDC.
P8
1.3 High Sensitivity Accelerometer
YMC Series the High Sensitivity Accelerometer is specifically designed to detect the ultra–low vibration, low
frequency vibration. This series is applied for the bridge structural testing, vibration monitoring, earthquake monit
oring and early warning, ground and foundation vibration monitoring, geological structure research, and other
areas of the low vibration level and low frequency vibration.
YMC 132A Series

YMC 131A Series YMC 146A Series
YMC 232A Series
Model:YMC 131A01 131A02 131A05 131A10 132A01 132A02 132A05 132A10 232A03 146A01G
3000pC/
Sensitivity(±10%) V/g 1.0 2.0 5.0 10.0 1.0 2.0 5.0 10.0 g
1.0
g
Measuring Range
pk
±5.0 ±2.5 ±1.0 ±0.5 ±5.0 ±2.5 ±1.0 ±0.5 ±50 ±5.0
mg
Resolution rm 0.1 0.05 0.02 0.01 0.1 0.05 0.02 0.01 – 0.1
s
±5% Hz 0.3 – 750 0.3 – 750 0.5 – 500 0.3 – 500 0.3 – 800 0.3 – 750 0.3 – 500 0.3 – 500 800 0.5 – 300
Frequenc
y Range ±10
Hz 0.2 – 2k 0.2 – 1k 0.1 –800 0.1 –800 0.2– 2k 0.2 – 1k 0.1 –800 0.1 –800 1.2k 0.2 – 500
%
Resonant kH
Frequency z
3.5 3 2.5 2.5 2.5 3 2.5 2.5 3 1.5
Temperature
℃ –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –40– +121 –54– +150 –40 – +121
Range
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear /Shear /Shear /Shear /Shear
2 pin 2 pin 2 pin 2 pin
Output Connector MIL–C–5015 MIL–C–5015 MIL–C–5015 MIL–C–5015 M5 Side M5 Side M5 Side M5 Side M5 Side 4 pin M12
Top Top Top Top
Case Case Case Case Ground Ground Ground Ground Ground Case
Electrical Isolation Ω Isolation Isolation Isolation Isolation Isolation Isolation Isolation Isolation Isolation Isolation
≥109 ≥109 ≥109 ≥109 ≥109 ≥109 ≥109 ≥109 ≥109 ≥109
Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel
Sealing Welded Welded Welded Welded Welded Welded Welded Welded Welded Welded
Weight g 180 180 280 280 180 180 280 280 200 320
m
Size Φ32╳66 Φ32╳66 Φ32╳66 Φ32╳66 Φ37╳32 Φ37╳32 Φ44╳53 Φ44╳53 Φ40╳48 46╳46╳24
m
Mounting 1/4-28(Female) M5(Female) M8(Female) M5(Female) M6(Thru-hole)
P9
1.4 Miniature Accelerometer
YMC Series the Miniature Accelerometer is designed with small size and weight. This series is applied for circuit
boards testing, small structural testing, drop testing, component testing and modal testing etc., which can
effectively reduce the influence of addtional mass on the test structure.
1.4.1 Miniature Single Axial PE Accelerometer
Top M5 Output: Side M5 Output: Top M5 Output: Top Integral Cable Output:
261A05:PE Mode 262A05:PE Mode 263A03:PE Mode 263A03Z:PE Mode
Side M3 Output: Side Integral Cable Output: Side M3 Output: Side Integral Cable Output:
264A03:PE Mode 264A03:PE Mode 266A01:PE Mode 266A01Z:PE Mode
263A03 264A03 266A01

Model:YMC 261A03 262A05
263A03Z 264A03Z 266A01Z
Sensitivity pC/g 3.0 5.0 3.5 3.0 1.5
Measuring Range g pk ±2000 ±2000 ±3000 ±3000 ±2000
±5% Hz 8k 8k 10k 10k 12k

Frequency
Range
±10% Hz 10k 10k 12k 12k 15k
Resonant Frequency kHz 45 30 45 45 50
Temperature Range ℃ –54 – +150 –54 – +150 –54 – +150 –54 – +150 –54 – +150
Sensing Element Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear
M5/5-44 Top 5–44/M3 Side 5–44/M3 Side

Output Connector M5 Top M5 Side
Integral Cable Integral Cable Integral Cable
Housing Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Sealing Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue
Weight g 3.2 6.2 5 5 1.7
Size mm Φ10╳10 10╳10╳10 Φ8╳14.5 Φ8╳11.8 7.5╳11╳4.5

M3(Female) or M3(Female) or M3(Female) or
Mounting Adhesive Adhesive
Adhesive Adhesive Adhesive
P10
1.4.2 Miniature Single Axial IEPE Accelerometer
Top M5 Output: Side M5 Output:

Top M5 Output: Integral Cable: Side M3 Output: Integral Cable:
161A 162A
163A10:IEPE 163A10Z:IEPE 164A10:IEPE 164A10Z:IEPE
Series:IEPE Series:IEPE
163A10 164A10
Model:YMC 161A10 161A50 161A100 162A10 162A50 162A100
163A10Z 164A10Z
Sensitivity(±10%) mV/g 10 50 100 10 50 100 10 10
Measuring Range g pk ±500 ±100 ±50 ±500 ±100 ±50 ±500 ±500
mg
Resolution 10 2 1 10 2 1 10 10
rms
±5% Hz 0.5 – 8k 0.5 – 8k 0.5 – 8k 0.5 – 8k 0.5 – 8k 0.5 – 8k 1 – 10k 1 – 10k
Frequency
Range
±10% Hz 1 – 10k 1 – 10k 1 – 10k 1 – 10k 1 – 10k 1 – 10k 0.5 – 12k 0.5 – 12k
Resonant
kHz 40 40 40 30 30 35 45 45
Frequency
Temperature
℃ –40 – +121 –40– +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121
Range
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear /Shear /Shear
M5/5-44 M3/5-44
Top Side
Output Connector M5 Top M5 Top M5 Top M5 Side M5 Side M5 Side
Integral Integral
Cable Cable
Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel Steel Steel
Epoxy Epoxy Epoxy Epoxy
Sealing Welded Welded Welded Welded
Glue Glue Glue Glue
Weight g 7.5 7.5 7.5 7.5 7.5 7.5 5 5
9╳13.5╳
Size mm Φ11╳16 Φ11╳16 Φ11╳16 10╳10╳10 10╳10╳10 10╳10╳10 Φ8╳14.5
13.5
Mounting M5(Female), M5(Male) or Adhesive M3(Female) or Adhesive M3(Female) or M3(Male)
P11
1.4.3 Miniature Triaxial IEPE Accelerometer
141A10,141A20 141A50,141A100 141A200,141A500 1/4–28 to (3) BNC Cable
Model:YMC 141A10 141A20 141A50 141A100 141A200 141A500
Sensitivity(±10%) mV/g 10 20 50 100 200 500
Measuring Range g pk ±500 ±250 ±100 ±50 ±25 ±10
Resolution mg rms 10 6 2 1 0.5 0.2
±5% Hz 2 – 4k 2 – 4k 2 – 4k 1 – 4k 1 – 1.5k 1 – 1.5k

Frequency
Range
±10% Hz 1 – 5k 1 – 5k 1 – 5k 0.5 – 5k 0.5 – 2k 0.5 – 2k
Resonant Frequency kHz 30 30 25 25 20 15
Temperature Range ℃ –40 – +121 –40– +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear
Output Connector 1/4–28 4 pin 1/4–28 4 pin 1/4–28 4 pin 1/4–28 4 pin 1/4–28 4 pin 1/4–28 4 pin
Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel
Sealing Welded Welded Welded Welded Welded Welded
Weight g 8.5 8.5 19.5 19.5 35 35
Size mm 10.5╳10.5╳10.5 10.5╳10.5╳10.5 14╳14╳14 14╳14╳14 18╳18╳18 18╳18╳18
Mounting Adhesive Adhesive M5(Female) M5(Female) M5(Female) M5(Female)
P12
1.5 Industrial IEPE Accelerometer (Status Monitoring)
YMC Series the Industrial IEPE Accelerometer is designed by rugged, stainless steel vibration monitoring sensors
for predictive maintenance applications. This series is with hermetically sealed, case isolated, laser Welded
sealing, waterproof, prevent oil design; It is suitable for long–term stable and reliable work under the industrial
environment.
1.5.1 Industrial IEPE Accelerometer
Top output Side output Top output Side output
151A100D 151A100C 151A500D 151A500C
Model:YMC 151A100D 151A100C 151A500D 151A500C
Sensitivity(±10%) mV/g 100 100 500 500
Measuring Range g pk ±50 ±50 ±10 ±10
Overload Limit (Shock) g pk ±3000 ±3000 ±500 ±500
Resolution mg rms 0.5 0.5 0.1 0.1
Excitation voltage VDC 18 – 30 18 – 30 18 – 30 18 – 30
Constant current mA 2 – 10 2 – 10 2 – 10 2 – 10
DC offset VDC 11±1.5 11±1.5 11±1.5 11±1.5
±10% Hz 2 – 10k 2 – 6k 0.6 – 6k 0.6 – 3k

Frequency
Range
–3dB Hz 0.5 – 15k 0.5 – 10k 0.1 – 10k 0.1 – 4.5k
Resonant Frequency kHz 23 20 16 14
Temperature Range ℃ –54 – +121 –54 – +121 –54 – +121 –54 – +121
Sensing Element Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear

2 pin 2 pin 2 pin 2 pin
Output Connector
MIL–C–5015 MIL–C–5015 MIL–C–5015 MIL–C–5015
Housing Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Case Isolation Ω ≥109 ≥109 ≥109 ≥109
Sealing Epoxy Glue Epoxy Glue Epoxy Glue Epoxy Glue
Weight g 45 72 80 130
Size mm Φ17╳46 30╳18╳21 Φ22╳52 35.5╳23╳25
Mounting 1/4–28(Female) M6(Thru–hole) 1/4–28(Female) M6(Thru–hole)
P13
 Industrial IEPE Accelerometer Output Connectors and Cables:
Side output with

MIL–C–5015 MIL–C–5015
Normal Cable Armoured Cable screw and base Output
Output Socket Plug(Bended)
(Customized)
Red: Signal output

Black: Signal ground
Case isolation:
Connect to case
1.5.2 Accelerometer with Temperature Sensor
YMC Series the Temperature & Acceleration Accelerometer integrates temperature sensor with uniaxial or triaxial
accelerometer. Laser welded, water–proof, dust–proof, high reliability.
YMC 154AT Series YMC 157AT Series
Compound Sensor Main Parameters:
Acceleration Measuring Range: ±50 g – ±100 g

Output mode: IEPE
Temperture output:10mV/℃(–20℃ – +120℃);
Digital Temperture Output: –55℃ – +125℃;
PT–100 Platinum Resistors (Optional):–55 – +250℃;
Mounting: M12 or customized;
Output type: Integral cable or socket.
P14
1.5.3 Accelerometer for Handheld Vibration Meter

YMC 152A Series of Accelerometer is designed for various handheld vibration meters. YMC 152A100 is a IEPE
accelerometer with the excitation voltage down to 5 VDC (middle point=2.6VDC). It is suitable for a
battery–powered spot cheker or vibrometer. Low–power consumption, good anti–interference ability, matching
customized magnetic base, easy to carry and installation. YMC 153A Series, with DC power supply, low–power
consumption, associtated with vibrometer, provide short/long probes.
TNC Output: TNC Output: Individual Socket: Integral Cable: Low Excited Voltage: DC Supply:
252A25/252A100 152A25G/152A100G 152A50/152A100 152A50Z/152A100Z 152A20L 153A25
252A25 152A50G 152A50 152A50Z

Model:YMC 153A25
252A100 152A100G 152A100 152A100Z
Sensitivity(±10%) mV/g 25/100 pC/g 50/100 50/100 50/100 25
Measuring Range g pk ±1000 ±100/50 ±100/50 ±100/50 ±50
Overload Limit
g pk ±5000 ±5000 ±5000 ±5000 ±1000
(Shock)
Resolution mg rms – 1/0.5 1/0.5 1/0.5 2
Excitation Voltage VDC – 18 – 28 18 – 28 18 – 28
Excitation Current mA – 1 – 10 1 – 10 1 – 10 ±5VDC
DC offset VDC 10 – 14 10 – 14 10 – 14 10 – 14
Frequency ±10% Hz 1 – 8k 1 – 8k 1 – 8k 1 – 8k 1 – 8k
Range –3dB Hz 0.5 – 10k 0.5 – 10k 0.5 – 10k 0.5 – 10k 0.5 – 10k
Sensing Element Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear
Output Connector TNC TNC 4 pin Socket Integral Cable 4 Cores Cable
Hard Aluminum
Housing Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Oxide
Housing Isolation Ω – ≥109 ≥109 ≥109 ≥109

Sealing Welded Welded Welded Welded Epoxy Glue
Weight g 31 36 49 45 37
Size mm Φ16.5╳35 Φ16.5╳40 Φ18╳39 Φ17.3╳46 Φ24╳45
Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)
P15
1.6 Standard Sensor
YMC 271A01 Standard Sensor is used natural quartz as the sensing element, which has good temperature
characteristic, long–term stability, shear mode structure, the influence of the effective strain isolation base; The
bottom and top female M5 thread(10–32 optional) for mounting, which can applied in a laboratory standard sensor
for the precise calibration of vibration transducers by the back–to–back comparison method;Can be used as a
vibration sensor precision calibration, testing and inspection, etc.
YMC 271A02 is as high frequency standard sensor.
271A01(mid–frequency): Charge Output Mode

271A02(high–frequency): Charge Output Mode
171A10(mid–frequency): IEPE Output Mode
Model:YMC 271A01 171A10 271A02

Sensitivity(±10%) 1.25 pC/g 10 mV/g 2.0 pC/g
Measuring Range ±1000g ±500g ±5000
Overload Limit (Shock) ±1000g ±1000g ±10000g
Linearity ±0.5 % ±0.5 % ±0.5 %
±5% 1 – 5000 Hz 1 – 8000 Hz 2 – 10000 Hz
Frequency Range
±10% 0.6 – 6500 Hz 0.6 – 10000 Hz 1 – 15000 Hz
Resonant Frequency 20 kHz 20 kHz 55 kHz
Transverse Sensitivity ≤3%(30Hz) ≤3%(30Hz) ≤3%(30Hz)
Magnetic Sensitivity 0.1g/T 0.1g/T 0.1g/T
Acoustic Sensitivity 0.001 g (154 dB) 0.001 g (154 dB) 0.001 g (154 dB)
Base Strain Sensitivity 0.001g/με 0.001g/με 0.001g/με
Temerture Transient Sensitivity 0.05g/℃ 0.05g/℃ 0.05g/℃
Temperature Range –70 – +150 ℃ –40 – +121 ℃ –54 – +150 ℃
Temperature Deviation ±5% ±5% ±5%
Sensing Element Quartz Quartz P–10
Capacitance 47 pF – 1600 pF
Output Connector M5 Side M5 Side M5 Side
Housing Material Stainless Steel Stainless Steel Stainless Steel
Sealing Welded Welded Welded
Weight 37 40 17
Size Φ18╳27 Φ18╳29 Φ16╳18
Mounting (2) M5(Female) (2)M5(Female) M5(Female)
Recommended Mounting Torque 0.5 – 3.5 Nm 0.5 – 3.5 Nm 0.5 – 3.5 Nm
P16
1.7 High Temperture Accelerometer
YMC Series High Temperature Accelerometer: high impedance charge output mode.
Applications:
➢ High Temperature Vibration Measurements
➢ Engine Compartment Studies
➢ Exhaust Component Vibration Tests
➢ Steam Turbine Testing
➢ Engine Vibration Analysis
YMC 2107CM YMC 245A20CM YMC 272A10 YMC 272A10T/272A10HT
Model:YMC 2107CM 245A20CM 272A10 272A10T 272A10HT
Sensitivity pC/g 50 20 10 10 10
±5% Hz 5k 3k 6k 6k 6k
Frequency
Range
±10% Hz 6.5k 5k 8k 8k 8k
Temperature Range ℃ –70 – +220 –70 – +220 –70– +250 –70 – +350 –70 – +482
Ceramic Ceramic Ceramic Ceramic Ceramic

Sensing Element
/Shear /Shear /Shear /Shear /Shear
Integral Cable Differential
Output Connector (3) M5 M5
3m/ M5 2 pin 7/16–24
Stainless Stainless
Housing Material Stainless Steel Cast Iron Alloy
Steel Steel
Housing Isolation Ω – – – ≥109 ≥109
Sealing Welded Welded Welded Welded Welded
Weight g 32 45 15 91 91
Size mm Φ16╳22 25.4╳25.4╳14 Φ10╳18.5 42╳30╳25.4 42╳30╳25.4

Φ5(Thru–hole)/M6
Mounting M5(Female) Thread(bottom)(Z axial) M5(Female) (3) Φ5(Thru–hole)
(2) M5(Female)(X,Y axial)
P17
1.8 Water–proof Accelerometer
YMC 273A series(PE Mode)and YMC 173A series(IEPE Mode)water–proof

accelerometers are completely waterproof and designed to withstand high humidity and
under–water environmental vibration testing. These accelerometers are equipped with an
integral water–proof cable. The depth of water is up to 100 meters.
Model:YMC 273A10 273A50 173A10 173A100 173A500
Sensitivity 10 pC/g 50 pC/g 10 mV/g 100 mV/g 500 mV/g
Resolution mg rms – – 2.5 0.25 0.1
±5% Hz 1 – 8k 1 – 5k 1 – 8k 1 – 5k 0.5 – 3k
Frequency
Range
±10% Hz 0.5 – 10k 0.5 – 8k 0.5 – 10k 0.5 – 8k 0.3 – 5k
Ceramic Ceramic Ceramic Ceramic Ceramic

Sensing Element
/Shear /Shear /Shear /Shear /Shear
Output Connector Integral Cable Integral Cable Integral Cable Integral Cable Integral Cable
316L Stainless 316L Stainless 316L Stainless 316L Stainless 316L Stainless
Housing Material
Steel Steel Steel Steel Steel
Sealing Welded Welded Welded Welded Welded
Weight g 16 25 18 27 38
Size mm Φ15╳25 Φ15╳25 Φ15╳28 Φ15╳28 Φ18╳33
Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)
P18
1.9 MEMS Accelerometer (DC Response)
YMC 181A series MEMS DC Response Accelerometer is applied for analysis very low frequency or constant
acceleration. Unlike piezoelectric accelerometer, these accelerometers respond to 0 Hz .
Measuring Range: ±2g to ±200g;181A series: Signal Axis;182A series: Bi–axial;183A series: Tri–axial.
Measuring Frequency
YMC 181A Series Model Sensitivity
Range(pk) Range (±5%)
Resolution
181A02 1000 mV/g ±2 g 0 – 200 Hz 4 mg rms
181A02P 1000 mV/g ±2 g 0 – 150 Hz 0.15 mg rms
181A05 300 mV/g ±5 g 0 – 200 Hz 7.5 mg rms
YMC 182A Series 181A10P 200 mV/g ±10 g 0 – 400 Hz 0.5 mg rms
181A20 100 mV/g ±20 g 0 – 300 Hz 10 mg rms
181A50P 40 mV/g ±50 g 0 – 800 Hz 3.5 mg rms

Measuring Frequency
Model Sensitivity
Range(pk) Range(±5%)
Resolution
182A02 183A02 1000 mV/g ±2 g 0 – 200 Hz 4 mg rms
YMC 183A Series 182A02P 183A02P 1000 mV/g ±2 g 0 – 150 Hz 0.15 mg rms
182A05 183A05 300 mV/g ±5 g 0 – 200 Hz 7.5 mg rms
182A10P 183A10P 200 mV/g ±10 g 0 – 400 Hz 0. 5 mg rms
182A20 183A20 100 mV/g ±20 g 0 – 300 Hz 10 mg rms
182A50P 183A50P 40 mV/g ±50 g 0 – 800 Hz 3.5 mg rms
181A Series Signal Axial 182A Series Bi–axial 183A Series Tri–axial
Model:YMC
General Purpose Precise (suffix p) General Purpose Precise (suffix p) General Purpose Precise (suffix p)
Output Type Single End Single End Single End

Shock Limit ±3000 g pk ±5000 g pk ±3000 g pk ±5000 g pk ±3000 g pk ±5000 g pk
Excitation Voltage 9 – 15 VDC 9 – 15 VDC 9 – 15 VDC
Temperature Range –40– + 85℃ –40– + 85℃ –40– + 85℃
Output Connector Integral Cable with 3m (4 cores) Integral Cable with 3m (5 cores) Integral Cable with 3m (5 cores)
Housing Material Titanium Titanium Titanium
Sealing Welded Welded Welded
Weight 17 Gram 20 Gram 25 Gram
Size(mm) 21.5╳21.5╳10.5 25╳25╳12 20.5╳20.5╳20.5 28╳28╳25 20.5╳20.5╳20.5 28╳28╳25
Mounting (2) Φ3(Thru–hole) (2) Φ4(Thru–hole)
P19
2. Piezoelectric Vibration Velocity Sensor

YMC Series Piezoelectric Vibration Velocity Sensors are solid state piezoelectric velocity measurement devices. Many vibration
analysts prefer to examine vibration signals in terms of velocity (mm per second) to amplify the signal of interest. Piezoelectric
Velocity Sensors inherently decrease high frequency signals allowing better measurement of low frequency vibration. They are
essentially accelerometers with an internal integration circuit which will produce an output relative to velocity.
Features
⚫ Ideal for monitoring low–to–intermediate frequency applications
⚫ Generates an output proportional to velocity
⚫ Velocity measurements serve as a reliable guide for monitoring the severity of faults in slow–rotating equipment
⚫ ESD and miswiring protection
YMC 311V01 Series: IEPE Mode, Top Output YMC 311V02 Series: IEPE Mode, Side Output
YMC 312V01 Series: DC Supply Mode, Top Output YMC 312V02 Series: DC Supply Mode, Side Output
2.1 Piezoelectric Vibration Velocity Sensor(IEPE Mode)

311V01–25.4 311V01–50.8 311V01–100 311V01–250 311V01–500 311V01–1270
Model:YMC
311V02–25.4 311V02–50.8 311V02–100 311V02–250 311V02–500 311V02–1270
Sensitivity mV/mm/s 200 100 50 20 10 4
Measuring Range mm/s pk ±25.4 ±50.8 ±100 ±250 ±500 ±1270
Resolution mm/s rms 0.03 0.05 0.1 0.25 0.5 1
Frequency ±5% Hz 5 – 800 5 – 800 5 – 6k 5 – 6k 5 – 8k 5 – 8k

Range ±10% Hz 5 – 2k 5 – 2k 5 – 8k 5 – 8k 5 – 10k 5 – 10k
Resonant Frequency kHz 2.5 2.5 16 16 23 23
Temperature Range ℃ –40 – +85 –40 – +85 –40 – +85 –40 – +85 –40 – +85 –40 – +85
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Sensing Element
/Shear /Shear /Shear /Shear /Shear /Shear
Excitation Voltage V +18–+28 +18–+28 +18–+28 +18–+28 +18–+28 +18–+28
Excitation Current mA 2 – 10 2 – 10 2 – 10 2 – 10 2 – 10 2 – 10
DC Offset V +10 – +14 +10 – +14 +10 – +14 +10 – +14 +10 – +14 +10 – +14
Output Connector MIL–C–5015 MIL–C–5015 MIL–C–5015 MIL–C–5015 MIL–C–5015 MIL–C–5015
Stainless Stainless Stainless Stainless Stainless Stainless
Housing Material
Steel Steel Steel Steel Steel Steel
Housing Isolation Ω ≥109 ≥109 ≥109 ≥109 ≥109 ≥109
Sealing Epoxy Epoxy Epoxy Epoxy Epoxy Epoxy
65 65 65 65 65 65
Weight g
80 80 80 80 80 80
Φ22╳52 Φ22╳52 Φ22╳52 Φ22╳52 Φ22╳52 Φ22╳52
Size mm
30L╳18W╳21H 30L╳18W╳21H 30L╳18W╳21H 30L╳18W╳21H 30L╳18W╳21H 30L╳18W╳21H
1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28

Mounting
Φ6 Φ6 Φ6 Φ6 Φ6 Φ6
P20
2.2 Piezoelectric Vibration Velocity Sensor(DC Supply Mode)

2.2.1 Dynamic Output within 4 – 20mA
Measuring Frequency Range
Model Sensitivity Resolution Weight(g) Size(mm)
Range(mm/s pk) (±10%)
312V01–12.7–ACI 630μA/mm/s ±12.7 5– 1000 Hz 0.1 mm/s rms 125 Φ22╳55
312V01–25.4–ACI 315μA/mm/s ±25.4 5 – 1000 Hz 0.3 mm/s rms 125 Φ22╳55
312V01–50.8–ACI 167μA/mm/s ±50.8 5 – 1000 Hz 0.8 mm/s rms 125 Φ22╳55
312V01–100–ACI 80μA/mm/s ±100 5 – 1000 Hz 1.0 mm/s rms 125 Φ22╳55
2.2.2 RMS Output within 4 – 20mA

Measuring Frequency Range
Model Output Resolution Weight(g) Size(mm)
Range(mm/s rms) (±10%)
312V01–12.7–DCI 4 – 20 mA 0 –12.7 5 – 1000 Hz 0.07 mm/s rms 125 Φ22╳55
312V01–25.4–DCI 4 – 20 mA 0 – 25.4 5 – 1000 Hz 0.1 mm/s rms 125 Φ22╳55
312V01–50.8–DCI 4 – 20 mA 0 – 50.8 5 – 1000 Hz 0.15 mm/s rms 125 Φ22╳55
2.2.3 RMS Output within 0–5V

Measuring Frequency
Model Output Resolution Weight Size(mm)
Range(mm/s rms) Range (±10%)
312V01–12.7–DCV 0–5V 0 – 12.7 5 – 1000 Hz 0.1 mm/s rms 125 Φ22╳55
312V01–25.4–DCV 0–5V 0 – 25.4 5 – 1000 Hz 0.22 mm/s rms 125 Φ22╳55
312V01–50.8–DCV 0–5V 0 – 50.8 5 – 1000 Hz 0.50 mm/s rms 125 Φ22╳55
Common Parameters:
1、 Power Supply: +15 – +30V DC

2、 Non–linearity:＜3% F.S.
3、 Transverse Sensitivity:＜5%
4、 Temperture Range:–40 – +85℃
5、 Output signal:4 – 20mA, 0 – 5V, or others
6、 Load Resistance:((VDC–15)╳1000/20mA)Ω
7、 Signal Ground Insulation Resistance: ≥108Ω
8、 Output types:
➢ 4 – 20mA Output: 2 pin MIL–C–5015;
➢ Terminal or lead output type: directly lead to the output signal;
➢ Output with or initial acceleration signal:3 pin MIL–C–5015
P21
3. Proximity (Eddy) Displacement Sensor
YMC 401D Series non–contact displacement Sensors using eddy current technology measure
distances, displacements or positions of any electrically–conductive target.
These objects may have both ferromagnetic and non–ferromagnetic properties. Due to the high
insensitivity to oil, dirt, dust, moisture, interference fields, etc. the eddy current principle is eminently
suitable for applications in harsh industrial environments.
Measured material: #45 Steel
Model:YMC 401D01 401D02 401D04 401D08 401D10

Sensitivity (±2%) V/mm 16 8 4 2 1.6
Measuring Range mm 0.40 – 1.40 0.50 – 2.50 1.00 – 5.00 2.00 – 10.00 2.00 – 12.00
Probe Diameter mm Φ5 Φ8 Φ11 Φ18 Φ25
Frequency Range Hz DC – 5k DC – 5k DC – 5k DC – 5k DC – 5k
Probe Temperature
℃ –20 – +100 –20 – +100 –20 – +100 –20 – +100 –20 – +100
Range
Pre–amplifier
℃ –20 – +70 –20 – +70 –20 – +70 –20 – +70 –20 – +70
Temperature Range
Probe Output Connector SMA SMA SMA SMA SMA
Pre–amplifier Output Type Terminals Terminals Terminals Terminals Terminals
Power Supply 12mA/–24VDC 12mA/–24VDC 12mA/–24VDC 12mA/–24VDC 12mA/–24VDC
Probe Mounting Size mm M8╳1╳65 M10╳1╳50 M14╳1.5╳110 M20╳1.5╳110 M30╳2╳110
Pre–amplifier Size mm 60╳80╳45 60╳80╳45 60╳80╳45 60╳80╳45 60╳80╳45
4. Quartz Dynamic Force Sensor & Impedance Head

YMC series Quartz Dynamic Force sensors are used to measure dynamic or quasistatic tensile or compression forces. It
has a high rigidity and thus a high natural frequency. The high resolution allows to measure low dynamical changes of
large forces.
4.1 Dynamic Force Sensor (compression only): Side Output
501F01–1
YMC 501F Series dynamic force 501F01,501F02,501F03 501F03PE
(IEPE output)
sensors (compression only).
Applications for packaging drop test,
impact test, cyclic impact, collision
test, punching machine, punching,
etc.
Resonant Measurement Temperature Output Size

Model:YMC Sensitivity Resolution Weight
Frequency Range Range Type mm
501F01–1 10 mV/N ≥50 kHz 500 N 2 mN –40 – +121℃ 9 Gram M3 Φ15╳7.5
501F01 10 mV/N ≥50 kHz 500 N 2 mN –40 – +121℃ 20 Gram M5
501F02 2.5 mV/N ≥50 kHz 2 kN 10 mN –40 – +121℃ 20 Gram M5
Φ18╳10
501F03 1 mV/N ≥50 kHz 5 kN 20 mN –40 – +121℃ 20 Gram M5
501F03PE 4 pC/N ≥50 kHz 5 kN – –70 – +200℃ 17 Gram M5
P22
4.2 General Purpose Dynamic Force Sensor (tension/compression)
YMC 502F Series dynamic force sensor is applied for the dynamic
tensile and compression, impact and repeated applications, drop
testing, material testing etc.
Model:YMC 502F01 502F02 502F03 502F03PE

Sensitivity mV/N 10 2.5 1 4 pC/N
Measuring Range N pk ±500 ±2000 +5kN,–2kN 5kN,–2kN
Non–linearity % ≤1 ≤1 ≤1 ≤1
Resonant Frequency kHz 60 60 60 60
Temperature Range ℃ –40 – +121 –40 – +121 –40 – +121 –70 – +200
Resolution mN rms 6 25 50 –
Min. Frequency Hz 1 1 1 0.3
Output Connector M5 M5 M5 M5
Size mm Φ18╳19 Φ18╳19 Φ18╳19 Φ18╳19
Weight g 30 30 30 27
4.3 Dynamic Force Sensor (compression only): Top Output
YMC 512F Series dynamic force sensor is applied for special occasions. This series
suffer from single direction of compression with top output, such as impact force
hammer, etc. YMC 512F series is used in the packaging drop test, impact test,
cyclic impact, collision testing, punching machine testing, modal test, etc..
512F01 512F02 512F03 512F04 512F05 512F06

Model:YMC
512F01PE 512F02PE 512F03PE 512F04PE 512F05PE 512F06PE
mV/N 5 2.5 1 0.5 0.1 0.1
Sensitivity
pC/N 4 4 4 4 4 2
Measuring Range kN pk 1.0 2.0 5.0 10 50 100
Non–linearity % ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
Resolution mN rms 20 50 100 250 1000 2000
Low Frequency Hz 1 1 1 0.5 0.5 0.3
Output Connector M5 M5 M5 M5 M5 M5
Size mm Φ14╳30 Φ14╳30 Φ14╳30 Φ26╳34 Φ26╳34 Φ48╳56
Weight g 20 20 20 58 58 310
P23
4.4 Dynamic Force Sensor: Force Ring
YMC 511F Series with clamp(Link):

YMC 511F Series: ring, compression only
tension and compression
Model:YMC 511F01 511F02 511F03 511F04 511F05 511F06 511F07 511F08PE

Sensitivity mV/N 10 2.5 1 0.5 0.1 0.05 0.02 2 pC/N
Measuring
Range
kN pk 0.5 2 5 10 50 100 250 500
Non–linearity % ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
Resonant
Frequency
kHz 70 70 70 50 50 40 35 25
Temperature
℃ –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –40 – +121 –70 – +200
Range
mN
Resolution
rms
10 50 120 250 1250 2500 5000 –
Min.
Frequency
Hz 1 1 1 1 1 1 1 0.3
Output Connector M5 M5 M5 M5 M5 M5 M5 M5/TNC
Φ46×Φ20×1 Φ56×Φ21×1 Φ95×Φ41×2
Size mm Φ18×Φ6×12 Φ18×Φ6×12 Φ18×Φ6×12 Φ26×Φ8×12 Φ26×Φ8×12
3 7 3
Weight g 24 24 24 30 30 85 250 780
4.5 Triaxial Dynamic Force Sensor
YMC 503F Series triaxial dynamic force sensor can simultaneously monitoring
dynamic force three directions (X, Y, Z). The sensor provides two with four screw
hole assembly splint, respectively fixed on both sides of the sensor. Apply for
force-limited vibration testing, dynamometer, modal analysis, the cutting force
testing, etc.Charge and IEPE output optional.
Model:YMC 503F01 503F02

Sensitivity mV/N Fx/ Fy:2 Fz:1 Fx/ Fy:0.3 Fz:0.15
Measuring Range kN pk Fx:Fy:2.5 Fz:5 Fx:Fy:15 Fz :30
Non–linearity % ≤1 ≤1
Resonant Frequency kHz 10 10
Temperature Range ℃ –54 – +121 –54 – +121
Resolution N rms X:Y:0.015;Z:0.03 X:Y:0.15;Z:0.3
Min. Frequency Hz X:Y:1; Z:1 X:Y:0.5; Z:0.5
Output Connector (3) M5 (3) M5
Size mm 55╳55╳60 80╳80╳90
Weight g 1000 3000
P24
4.6 Impedance Head (Force +Acceleration)
YMC 504AF Series impedance head simultaneously measures an applied,

driving–point force and response acceleration of a test structure for determining
parameters such as mechanical mobility and mechanical impedance. The unit consists
of a precision accelerometer and a quartz force Sensor in a common housing.
Installation is primarily facilitated at the structural excitation points, in series with a
stinger and vibration shaker.
Frequency
Measuring Temperature Output
Model:YMC Sensitivity Range Resolution Connector Mounting Weight Size
Range Range
(±10%)
A 50mV/g 0.5Hz –5kHz ±100g 1mg M5
504AF01 –40~+121 (2) M5 30Gram Φ17×30mm
F 5mV/N ≥55kHz ±1000N 5mN M5
A 100mV/g 0.5Hz–5kHz ±50g 0.5 mg M5

504AF02 –40~+121 (2) M5 30Gram Φ17×30mm
F 10mV/N ≥55kHz ±500N 2.5mN M5
A 50pC/g 0.5Hz–5kHz ±500g – M5

504AF01PE –54~+150 (2) M5 28Gram Φ17×30mm
F 4pC/N ≥50kHz ±1000N – M5
5. Quartz Dynamic Pressure Sensor

YMC 611P series Quartz Dynamic Pressure Sensor with IEPE amplified output are used YMC 601P Series: Charge Output (PE
for a variety of dynamic pressure measurements. The sensors are well suited for Mode)
YMC 611P Series: Voltage Output (IEPE
continuous operation in “dirty” environments, underwater, and in field test applications
Mode)
across long cables. For higher temperature applications, charge output Sensors are
available for use up to +250 °C.
Features:
⚫ Fast, micro–second response time;
⚫ Resonant frequency to ≥100 kHz;
⚫ Measure small pressure changes at high static pressure levels;
⚫ Operating temperature range from –40 to +250 °C(Charge Mode);
⚫ Rugged solid state construction withstands shock and vibration to thousands of G's;
⚫ IEPE amplified output for dirty or underwater environments can be transmitted through long
ordinary coaxial cable without loss of signal strength or an increase in noise.
Model:YMC 601P01 601P30 601P60 611P01 611P30 611P60

1000 100 100 5.0 167 83.5
Sensitivity
pC/MPa pC/MPa pC/MPa V/MPa mV/MPa mV/MPa
Measuring Range MPa pk 0 – 1MPa 0 – 30MPa 0 – 60MPa 0 – 1MPa 0 – 30MPa 0 – 60MPa
Nonlinearity %F.S ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
Resolution kPa – – – 0.015 0.015 0.015
Min. Frequency Hz 1 1 1 1 1 1
Output Connector M5 M5 M5 M5 M5 M5
Size mm Φ14 × 33 Φ14 × 29 Φ14 × 29 Φ14 × 33 Φ14 × 29 Φ14 × 29
Mounting M10×1 M10×1 M10×1 M10×1 M10×1 M10×1
Weight g 15 15 15 15 15 15
P25
6. Signal Conditioners
6.1 Charge Amplifiers
Charge amplifiers convert the charge output by a piezoelectric Sensor into a prop or tional voltage, which is used as an input variable for analysis systems, and
can be digitized in an analog–to–digital (A/D) converter if necessary. A charge amplifier basically consists of an inverting voltage amplifier with a high
open–loop gain and capacitive negative feedback. It relies on a metal oxide semiconduct or field effect transist or (MOSFET) or a junction field effect transist or
(JFET) at its input to achieve high insulation resistance and minimize leakage current. If the open–loop gain is sufficiently high, the cable and Sensor
capacitance can be neglected, leaving the output voltage dependent on just the charge at the charge amplifier input and the range capacitor.
YMC 8102: multiple input type:

YMC 8101 Miniature charge Charge, Voltage, IEPE; Optional
amplifier for industrial use rugged, Gain, High–pass filters,
sealed case; with various Low–pass Filters, Sensitivity
connection facilities; also available unifor mization; Built–in double
with range adjusted to a specific integrators circuit for acceleration,
Sensor. Its rugged construction displacement and velocity;
makes it particularly suitable for Switchable for Gain, LPF, HPF,
installation on site in machine Sensitivity n or malized. Charge
monit or ing systems. and Voltage input. Int. Battery and
Ext. Source Supply.
YMC 8102T: Panel mounted low
noise charge amplifier gain, high
pass and low pass, normalized,
YMC 8102A: Desktop low noise such as external regulation,
charge amplifier (general test) voltage (V) and charge (PE) 2
kinds of input mode, can be
positive and negative power
supply converter;
YMC 8103 Multi–channel charge amplifier
Features: Assembled Multi–channels (4chs, 6chs or
8chs available); Small size, high integration; Three
decimal–system unifor mization output (1–10 pC/UNIT);
Switchable for Gain and LPF; Low noise and wide
frequency band (0.3 to 100kHz); Low price, suitable for
multi–point test; Overload indication.
Model:YMC 8101 8102 8102 A/T 8103

Voltage/IEPE: ±10V Voltage: ±10V
Input Range ±5╳104pC ±105pC
Charge: ±106pC Charge: ±106pC
1 – 9.99
Sensitivity Uniformization 0.100~999 1.00~1099 1.00~10.99
(Adjustable)
0.01,0.1,1, 0.01,0.1,1, 1,3,10,30,100
Gain mV/pC 1 – 100(Constant)
10,100,1000 10,100,1000 300,1000
A:0.3,1,310,30,100
High–pass Filters Hz 1(Constant) V:1 ,3,10,30,100 0.3,1,3,10,30,100 0.3 (Fixed)
D:1 ,3,10,30,100
Low–pass Filters kHz ≤100(Constant) 0.3,1,3,10,30,100 0.3,1,3,10,30,100 0.3,1,3,10,30,100
Accuracy % ±1 A: ±1; V:±3 ;D:±3 ±1 ±1
Noise μV ≤10 ≤5 ≤5 ≤5
Output Range V ±5 ±10 ±10 ±10

220V50Hz0.1A 220V50Hz0.1A 220V50Hz0.3A
Power Supply DC:±14V – ±18V
or 110V60Hz0.2A or DC±18V–±27V or DC±18V
Operating
℃ –10 – +50 –10 – +50 –10 – +50 –10 – +50
Temperature
Weight kg 0. 2 1.3 1.5 5.0(6 chs)
236×132.5×300
Size mm 80×50×24 45×122×200 70×132×200
(6 chs)
P26
6.2 IEPE Signal Conditioners
YMC 8201 Battery–powered IEPE sensor signal conditioner; Small size, light weight; Wide
frequency range; LEDs operation status indicator; Low–battery warning; Internal or external
power supply; Suitable for filed test. Battery–powered IEPE sensor signal conditioner; Small
size, light weight; Wide frequency range; LEDs operation status indicator; Low–battery
warning; Internal or external power supply; Suitable for filed test.
YMC 8201T Single channel, Miniature IEPE sensor signal conditioner. External DC power
supply, small size, light Weight.Can provide excitation source or IEPE sensors, power
supply and the IEPE sensors recuperated the output signal amplifying, filtering and so on.
YMC 8204 4 channels IEPE sensor signal conditioner; Selectable current (4 or 10

mA); Selectable gain 1 to 100; Two types of output connector; Wide frequency range; For
monitoring normal or faulty circuit condition by status LEDs; . Wide Frequency Response,
Low Noise, Good Stability;Gain,Excitation Current Switchable; Apply for IEPE Transducer’s
general test.
YMC 3832 MEMS sensor signal conditioner, can power for triaxial capacitive sensor ;
Built–in Selectable Low–pass filters,Gain.Can input 3 chs MEMS sensor’s input.
YMC 8216 16 channels IEPE sensor signal conditioner; Selectable current (4 or 10

mA); Selectable gain 1 or 10; Two types of output connector; Wide frequency range; For
monitoring normal or faulty circuit condition by status LEDs; Dimensions:44mm x 430mm x
240mm (19 inches case).
Input Frequency Excitation Excitation Input/output Power

Model:YMC Ch. Gain Range Voltage Current Type
Size mm Weight
Type Supply
Built–inRec
0.3Hz –
8201 1 IEPE 1,10
100kHz
24VDC 4mA BNC/BNC 26×66×100 300g hargeable
batteries
0.3Hz – External
8201T 1 IEPE 1(Optional)
100kHz
24VDC 4mA BNC/BNC 44×17×50 55g
DC supply
OFF,4mA,
Voltage 0.3Hz 220V50Hz
8204 4
IEPE
1,10,100
– 100kHz
24VDC 10mA,20m BNC/BNC 45×122×200 1.4kg
0.2A
A
220V50Hz
0.3Hz – 0.3A
8216 16 IEPE 1,10
100kHz
24VDC 4mA BNC/BNC 482×44×240 3.8kg
110V60Hz
1A
1,2,4, DC – 220V50Hz
3832 3 Voltage
8,10 30kHz
9VDC 20mA 7 pin/BNC 45×122×200 1.0kg
0.2A
P27
6.3 Miniature Impedance Convertor (2–wire Miniature Charge Amplifier)

YMC 8301 Series the Miniature Impedance Convertor with constant current source (2–20mA/+18 to+28VDC) can convert charge
signal to low–impedance voltage signal. Fixed gains of 0.1,1.0,10 mV/pC. YMC Series Impedance Convertor is designed to have an
inverted signal polarity.
YMC 8301 YMC 8301A YMC 8301B YMC 8301C YMC 8301TE
M5/BNC
M5/M5 M5/M5 M5/TNC TO–5 Sealing
with TEDS
3.1 Gram 5 Gram 17 Gram 2.6 Gram
50 Gram
Φ6.5×30mm Φ9×12mm Φ11.4×54mm Φ9×15mm
Φ12.5×81mm
Output Frequency Operating

Model:YMC Gain Input Range
Range Range
Accuracy Noise Power Supply
Temperature
8301– 0.1 –0.1mV/pC ± 50000 pC ±5.0V
0.3Hz 2–20mA
8301–1.0 –1.0 mV/pC ± 5000 pC ±5.0V ± 2% ≤ 40μV – 40 – +121℃
– 40kHz +18 – +28VDC
8301–10 –10 mV/pC ± 500 pC ±5.0V
6.4 Dynamic Strain Amplifier
YMC 86 Series Dynamic strain amplifier: direct digital display YMC 8601 YMC 8602 YMC 8603
each channel output Voltage; Optional shift Gain more, bridge,
Low pass Filters; Long wire automatic compensation; Double
12 bit D/A automatic tuning balance; Suitable for general and
High frequency response and strain test.
YMC 8602 can keep value with force sensor; Can directly
display the force and maximum values of the test.
Model:YMC 8601 8602 8603

Input Channels 1 1 2、4、6、8、10
Bridge Resistance 120 – 1000Ω 120 – 1000Ω 120 – 1000Ω
Input Range 0 – ±100000με DC :0 – ±100mV;AC:0 – ±10000mV 0 – ±100000με
Output Range ±10Vp/5mA ±10Vp/5mA ±10Vp/5mA
Noise ≤5μV ≤3μV ≤3μV

Zero:±1μV/℃;±0.1%/F.S/2h Zero:±1μV/℃;±0.1%/F.S/2h
Stability –
Sensitivity:±0.01%F.S/℃;±0.1%/F.S/2h Sensitivity:±0.01%F.S/℃;±0.1%/F.S/2h
Bridge Voltage 1、2、5、10VDC/50mA(Max.) 12VDC/50mA 1、2、5、10VDC/50mA(Max.)
Classification 100;300;1000;3000 DC:100,1000;AC:1,10 100;300;1000;3000
Gain Accuracy ≤±0.5% ≤±0.5% ≤±0.5%
Non–linearity 0.1% FS 0.1% FS 0.1% FS
Balance Auto:±5000με Auto Clear Zero Auto:±5000με
Frequency Range DC–100kHz DC–100kHz DC–100kHz
Low–pass Filters(–3dB) 30,100,300,1k,3k,10k,30k,100kHz 100kHz 30,100,300,1k,3k,10k,30k,100kHz
Operating Temperature:–10 to 50℃; Operating Temperature:–10 to 50℃; Operating Temperature:–10 to 50℃;
Operating Environment
Humidity: 85% R.H. Humidity: 85% R.H. Humidity: 85% R.H.
Power Supply 220V±10%50Hz0.2A 220V±10%50Hz0.2A 220V±10%50Hz1A
Size mm 45W ×122H ×200D 155W ×70H ×200D 235W ×132.5H ×300D
Weight 1.2 Kg 2.0 Kg 4.5Kg(10 chs)
Input/Output Type Input:7 pin LEMO Socket; Output: BNC Input:4 pinLEMO Socket Input:7 pin LEMO Socket; Output: BNC
P28
7 Dynamic Data Acquisition System

7.1 Dynamic Data Collector
YMC Series dynamic data collector, it is a kind of multichannel parallel data acquisition system based on USB2.0 interface; With
voltage/IEPE two input mode; Multi–channel arbitrary combination, support for multiple devices cascade, built–in programmable gain
amplifier and real–time digital filtering; Supporting function rich in universal test and analysis software; Provide the LabView and
MATLAB data interface, convenient and subsequent data processing; Particularly applicable to the company production of force and
acceleration sensor matching vibration measurement data acquisition/analysis system, the modal test system, etc.
YMC 9004
YMC 9204H YMC 9208 YMC 9216 YMC 9232
YMC 9004H
Model:YMC 9004 9004H 9204H 9208 9216 9232
Input (AD) 4 4 4 8 16 32
Channels
Output (DA) 0 0 2 2 2 2
Voltage ±10Vp ±8.8Vp ±10Vp ±10Vp ±10Vp ±10Vp

Signal
Input IEPE ±10Vp ±8.8Vp ±10Vp ±10Vp ±10Vp ±10Vp
Range
ChargePE – – ±105pC – – –
Voltage DC – 30kHz DC – 200kHz DC – 100kHz DC – 50kHz DC – 50kHz DC – 50kHz

Input
Signal 0.3Hz –
IEPE 0.3Hz – 30kHz 0.3Hz – 100kHz 0.3Hz – 50kHz 0.3Hz – 50kHz 0.3Hz – 50kHz
Frequency 200kHz
Range
ChargePE – – 0.3Hz~100kHz – – –
Signal Channel
100kHz 3MHz 1MHz 100kHz 100kHz 50kHz
Sampling Rate
Simultaneous
100kHz 750kHz 1MHz 100kHz 100kHz 50kHz
Sampling Rate
Signal
AD bits 24 16 16 24 24 24
Input (AD)
×0.1, ×1,
Bulit–in Gain ×1 ,×10 ,×100 ×1 ,×10
×10 ,×100
×1 ,×10,×100 ×1 ,×10,×100 ×1 ,×10,×100
Accuracy ≤±0.5％ ≤±0.5％ ≤±0.5％ ≤±0.5％ ≤±0.5％ ≤±0.5％
Conversion
– – 500kHz 500kHz 500kHz 500kHz
Rate
Signal Analog Output
– – ±10Vp ±10Vp ±10Vp ±10Vp
Output(DA) Range
Accuracy – – ≤±1％ ≤±1％ ≤±1％ ≤±1％
340×132.5
Size(mm)W×H×D 100×122×45 200×122×45 240 ×70×280 240 ×70×280 240 ×70×280
×280
Weight 460g 750g 3.5kg 3.5kg 4.0kg 6.5kg
USB
Power Supply Self –powering
7.5VDC 220V50Hz 220V50Hz 220V50Hz 220V50Hz
P29
7.2 Portable Multi–channel Data Acquisition System
YMC 9096 Dynamic and static strain testing system
Features:
⚫ 4 channel combination plug–in, can work alone as a 4 channel strain collector, USB interface;
⚫ Support up to 96 channels, insert any combination;
⚫ Support strain differential input/IEPE input;
⚫ Sampling frequency:20 k – 100 kHz parallel sampling;
⚫ Support IEPE sensors (IEPE Mode)
⚫ Support strain input, Fixed bridge (10v), differential input;
⚫ Built–in Gain(adjustable), overload indication;
⚫ Provide test and analysis software; suitable for multipoint strain and vibration test;
YMC 9216S Portable 16 channel dynamic data acquisition and analysis system
Features:
Internet
⚫ Input channels:16;
⚫ Input type: IEPE/V, ±10 V.
Remote testing
and Controling ⚫ Sampling rate:100 kHz/CH;
⚫ Input :24 AD;
⚫ Output :2 chs, 24;
⚫ Windows 7 operating system, touch screen, can be directly testing and analysis;
⚫ Interface, USB, LAN, through USB, LAN, WIFI, remote network control control;
⚫ Provide the corresponding test and analysis software, remote testing and analysis software;
⚫ Size:240 ×140 ×280 mm
⚫ Weight:about 5 kg
⚫ Suitable for field test and analysis;Remote testing and monitoring.
7.3 Signal Test and Modal Analysis Software
YMC 9800 consists of dynamic signal testing & analysis module, basic modal test & analysis module, impulse response analysis
module, digital signal generator module, sensor test & calibration module, strain test and analysis module, basic condition monitoring
& analysis module, acoustic test & analysis module, Vibration table/impact table testing, modal software etc.
YMC 9800–01 Dynamic Signal Testing & Analysis Module

Supporting all YMC dynamic data collectors. Data can be exported as UFF,
ASCII, MatLab etc format. Various analysis functions such as;:data
preprocessing, time domain, amplitude domain analysis, frequency domain
analysis and time–frequency domain analysis etc.
YMC 9800–02 Basic Modal Test & Analysis Module

Consists of three main funcional modules: project management, dynamic
singal processing, and modal prarmeters identification
The imported source data can be both time domain signals (excitation and
respose time histories) and frequency domain signal (frequency response
function, FRF)
With the capacity of not only traidtional experimental modal analysis (EMA,
both input and output data are needed), but also operational modal analysis
(OMA, exticited by the enviroment loads, only the output data can be
measured).
P30
YMC 9800–03 Impulse Response Analysis Module

Support YMC9204 (KC – 2000, KCL2000) Series shock tester, can complete
the impact test of High acceleration, the completion of real–time signal
acquisition, filtering, real–time control, and generate the shock response
spectrum. Automatic generation of test report;
YMC 9800–04 Digital Signal Generator Module
Support YMC9200 digital signal generator and all YMC DAQ with DA output
dynamic data collector; The dual digital signal output, can produce sine, sine
sweep, square wave, triangle wave, sawtooth wave, white Noise and
narrow–band random, pink Noise, brown Noise, pulse, amplitude modulation
wave and dc waveform; Adjusting amplitude, frequency, phase, etc.
YMC 9800–05 Sensor Test & Calibration module
Support the VCS–01 vibration sensor test & calibration system;
Auto–calibrating Sensitivity, Linearity, amplitude–frequency characteristic and
phase frequency characteristics; calibration method: point by point comparison
method, the sine sweep method, the random excitation method and the shock
excitation method; Offer Test Report;
YMC 9800–06 Strain Test & Analysis Module
Support dynamic and static strain testing system, data acquisition, signal
analysis and processing.
YMC 9800–07 Basic Condition Monitoring & Analysis Module
Support YMC on–line healthy monitoring system; It offers multi–staged acousto–optic alarm
trigger output and multi–channel combination. The real–time data acquisition, data record,
trend analysis, on–line monitoring, fault diagnosis, the management of reporting and
instrument of large–sized mechanical equipment could be made for long time. Simple
operation, easy installation, strong ability of anti–disturbing and high reliability.
The Diagram of Measuring Distribution & Three–level Alarms; Parameters Setting & Device
Management; Real–time Display & Record; Real–time Histogram Display; The Inquiry of
Historic Records; The data list and trend analysis; The Precise Fault Diagnosis.
YMC9800–08 Acoustic Test & Analysis Module
Acoustic analysis module provides Acoustic signal real–time processing and
post–processing functions, can analyses sound intensity, sound pressure, and
can use the L, A, C weighting, 1/1 and 1/3 octave analysis.
YMC 9800–09 Vibration Table Test Software Modules
With vibration sensor, dynamic data collector, according to the national
standard of electric, hydraulic, mechanical vibration table for each index
calibration; Such as distortion, transverse vibration than, the related projects,
such as amplitude uniformity test results automatically saved, easy to make
relevant reports; Historical data managed by tree structure, use very
convenient.
YMC 9800–10 Shock Test Module
Shock test software module, provides the perfect analysis and processing
functions, including test setup, operation control, digital filtering, data storage
and display, test report is automatically generated, and so on. Shock waveform
support national standard and national standard, MIL standard and the
standard of customer customization.Support YMC shock accelerometer.
N–MODAL Modal Test and Analysis Software
N–modal is designed for experimental modal analysis (EMA, both excitation and response
data are required), operational modal analysis (OMA, only response data is required), and
operational deflection shape (ODS) analysis N–Modal ODS.Consists of three main funcional
modules:project management, dynamic singal processing, and modal prarmeters
identification;The imported source data can be both time domain signals (excitation and
respose time histories) and frequency domain signal (frequency response function,
FRF) ;Multi–interface to most popular multi–channel data acquisition systems and
analyzers;With the capacity of not only traidtional experimental modal analysis (EMA, both
input and output data are needed), but also operational modal analysis (OMA, exticited by the
enviroment loads, only the output data can be mesured);Developed in the Microsoft’s Visual
C++ language development enviroment, making use of the technology of Object Oriented
Program, easily to maintain and extend;With flexible interface arrangement, abundant mouse
and shortcut keys operation, greatly improve work efficiency;Perfectly display and control of
two–dimentional curves and three–imentional graphics (geometry and mode shape
animation);Function of data copy, screen copy, saving curves to JPG files, saving animations to
AVI files, and so on, provide users with the privilledge of rapidly report and presentation
creation.
For more information, please contact with us.
P31
8 Exciter & Calibrator System

8.1 Signal Generator
YMC SG–01 Swept Signal Generator Features:

⚫ Output waveform: sine, triangle wave, square wave; white noise;
⚫ Frequency Range2Hz to 2kHz ;20Hz to 20kHz; Power Output:60W(4Ω);
⚫ Signal Output: ±10VP–P
⚫ Swept–frequency mode: Manual, Automatic;
⚫ Operating Mode: Log, Linear;
⚫ Frequency Range:2 Hz to 2 kHz; 20Hz to 20 kHz
Apply for driving MS–50 modal shaker and VT–50 small vibrator.
YMC 9200 Digital Signal Generator Features:

⚫ Output Wave: Defined Waveform (Set by Software)
⚫ Output Channels:2
⚫ Frequency Range: DC to 30kHz
⚫ Output Amplitude: ±10VP–P
⚫ DA Conversion Rate:500kHz
⚫ Interface: USB2.0
⚫ Weig:300Gram;
⚫ Size:100×122×45mm
⚫ Power Supply: USB Interface self–powering
8.2 Linear Power Amplifier
YMC LA series Power Amplifier are designed to drive MS series Modal Shakers and MS
YMC LA-100, LA-200, YMC LA-1500 series small vibrators. Features:
LA-500, LA-800 ⚫ Adjustable RMS output–current limit
⚫ Low or high output impedance
⚫ Low distortion over wide frequency range
⚫ Extensive built–in protection
⚫ Operating mode (current or voltage), current state and interlock input disabled
⚫ Rear panel voltage and current monitor points
⚫ Multifunction display (True Colour LCD) showing approximate output current
and output voltage, clipped output signal, temperature overload, current
overload.
⚫ LA60 and LA–100 power amplifier is built–in Sine signal generator from 5Hz to
30kHz with 60/100VA power output.
Model:YMC LA–100 LA–200 LA–500 LA–800 LA–1500

Rated Power Output 100 VA 200 VA 500 VA 800 VA 1500 VA
Input Impendence >10 kΩ >10 kΩ >10 kΩ >10 kΩ >10 kΩ
Rated Voltage Output 17 Vrms 17 Vrms 25 Vrms 32 Vrms 40 Vrms
Rated Current Output 6 Arms 12 Arms 20Arms 25 Arms 37.5Arms
Non–linearity Distortion ＜0.5% ＜1% ＜1% ＜1% ＜0.5%
S/N Rate ≥90 ≥80dB ≥80dB ≥80dB ≥90dB
Gain V/V±2dB 10 10 10 10 10
DC 0 – 50k±1dB 0 – 50k±1dB 0 – 50k±1dB 0 – 10k±1dB 0 – 10k±1dB
Frequency
Range (Hz) AC 20 – 50k±1dB 20 – 50k±1dB 20 – 50k±1dB —— ——
Full Power 20 – 5k 20 – 5k 20 – 5k 20 – 5k 10 – 5k
Frequency
Range (Hz) Reduced
0 – 50k 0 – 50k 0 – 50k 0 – 50k 0 – 10k
Power
Size W×H ×D (mm) 483×89×340 483×133×340 483×133×480 483×133×540 500×485×560
Weight (kg) 10.5 13 22.5 28 63

Power Supply 220V50Hz 3A 220V50Hz 3A 220V50Hz8A 220V50Hz 10A 20V 50Hz 15A
To drive Modal Shakers and MS–50 MS–100 MS–500 MS–800 MS–1000
Vibrators VT–50 VT–150 VT–300 VT–500 VT–1000
P32
8.3 Impact Hammer
YMC IH series Impact Hammer integrates a rugged, force sensor into the hammer’s striking surface. Variety of
hammers can suit different size test subject. Assortment of tips offer frequency tailored impulse. Apply for
structure health testing, resonance determination, modal analysis; Charge (PE) Type can be customized.
YMC IH–02 YMC IH–05 YMC IH–10 YMC IH–20 YMC IH–50
YMC IH–01–1 YMC IH–01
YMC IH–02PE YMC IH–05PE YMC IH–10PE YMC IH–20PE YMC IH–50PE
IH–02 IH–05 IH–10 IH–20 IH–50

Model:YMC IH–01–1 IH–01
IH–02PE IH–05PE IH–10PE IH–20PE IH–50PE
mV/N 100 25 2.5 1 0.5 0.25 0.1
Sensitivity
pC/N – – 4 4 4 4 4
Measuring Range N pk 50 200 2000 5000 10000 20000 50000
Nonlinearity % ≤5 ≤5 ≤3 ≤3 ≤1 ≤1 ≤1
Resolution mN rms 2 6 50 100 250 450 1000
Low Frequency Hz 1 1 1 1 0.5 0.5 0.3
Head Weight g 15 28 80 120 445 445 1000
Head Diameter mm Φ14 Φ18 Φ16 Φ20 Φ32 Φ32 Φ45
Hammer Length mm 115 250 250 250 350 350 400
Output Connector M5 BNC BNC BNC BNC BNC BNC
Impact pulse width and frequency response is

different with different hammer head and tips. It Common Parameters
should be based on actual testing.
IEPE Output Mode:
Excitation voltage: +18 – +28V;
Constant current: 2 – 10mA;
DC offset:10 – 14VDC;
Output impendance: ≤100Ω;
Charge Output Mode:
Insulation Resistance:≥1012Ω
Tips：
YMC IH–02, IH-05 YMC IH–10, IH-20 YMC IH–50
YMC IH–01–1 YMC IH–01
YMC IH–02PE, IH-05PE YMC IH–10PE, IH-20PE YMC IH–50PE
P33
8.4 Modal Shaker
YMC MS series Modal Shaker is designed for demanding YMC MS–10, MS–20 YMC MS–50 YMC MS–100, MS–200
modal testing applications; MS series permanent magnet
modal shakers provide precise, reliable, stable and
long–lasting operation. Highest quality materials, stringent
quality control and rugged construction assure a versatile
means of modal excitation for any experimental modal test
using the attached excitation method.
Based upon years of practical modal test experiences, the
line of YMC Modal shakers, all exhibiting high
force–to–weight ratio, has been specifically developed to YMC MS–500 YMC MS–1000
help ensure the best possible modal test performance with
minimum setup time.
Uses:
⚫ General mechanical mobility measurements
⚫ Experimental modal analysis on most mechanical
structures
⚫ SISO, MISO, SIMO and MIMO modal test applications
⚫ Advanced structural dynamics investigations
⚫ Structural damage detection
⚫ Finite element model correlation
Model:YMC MS–10 MS–20 MS–50 MS–100 MS–200 MS–500 MS–1000

Rated Force (N pk) ≥10 ≥20 ≥50 ≥100 ≥200 ≥500 ≥1000
Max. Displacement
±5 ±5 ± 7.5 ± 10 ± 10 ± 12.5 ± 15
(PK–PK) (mm)
Max. Input Current
≤2.0 ≤2.0 ≤6 ≤12 ≤20 ≤25 ≤38
(Arms)
Frequency Range (Hz) DC – 6k DC – 6k DC – 5k DC – 4k DC – 4k DC – 3k DC – 1.5k
Coil DC Impedance 6.0Ω 6.0Ω 1.0Ω 1.0Ω 0.5Ω 0.6Ω 0.6Ω
Effective Moving Mass (kg) 0.1 0.1 0.30 0.5 0.67 0.95 2.0
Size(mm) Φ78×115 Φ78×115 Φ148×200 Φ158×200 Φ158×200 Φ210×250 Φ240×300
Mounting Hole 80×80 80×80 158×128 200×160 200×160 240×190 240×200
Size(mm) 4–Φ7 4–Φ7 4–Φ8 4–Φ10 4–Φ10 4–Φ10 4–Φ11
Weight(kg) 3.3 3.3 14 18 18 29 40
Output Connector Rod /M5 Rod /M5 Rod/M5 Rod /M5 Rod /M5 Rod /M5 Rod /M5
Associated Amplifier 60W 60W/100W 60W/100W 200W/500W 500W/800W 500W/800W 1500W
Optional Accessories:
Rod Holding Device
Hex Wrench Air Cooling Device(Optional)
Thread:M5/M5, Length:100mm (Optional)
P34
8.5 Small Exciter

YMC VT series Permanent Magnetic VibrationVibrators is the high–quality, compact machine with a permanent magnetic field. Be designed for long,
trouble–free operation, and has a force rating of from 10N to 1000N enabling relatively heavy loads to be excited to high g levels. The moving element is
supported by a robust rectilinear guidance system consisting of grouped radial and transverse flexures in a unique construction. The flexures are made from
a bonded sandwich of spring steel and a damping elastomer, providing a clean acceleration waveform with low cross motion and low distortion
characteristics.
USES:
Vibration testing; Mechanical impedance measurements; Educational demonstrations; Structural response testing; Vibration transducer calibration
YMC VT–20 YMC VT–50 YMC VT–150 YMC VT–300 YMC VT–500 YMC VT–1000
Model:YMC VT–20 VT–50 VT–150 VT–300 VT–500 VT–1000

Rated Force (Peak) N ≥20 ≥50 ≥150 ≥300 ≥500 ≥1000
Max. Displacement(mm) ±4 ±4 ± 7.5 ± 7.5 ± 10.0 ± 10.0
Max. Acceleration(g) 20 20 40 45 45 45
Max. Input Current (Arms) ≤2.5 ≤6 ≤12 ≤12 ≤25 ≤30
Frequency Range (Hz) 20 – 10k 10 – 9k 10 – 5k 10 – 5k 5 – 2k 5 – 2k
Coil DC Impedance 2Ω 0.9Ω 0.8Ω 0.7Ω 0.9Ω 0.7Ω
Effective Moving Mass
0.1 0.25 0.45 0.54 1.0 2.2
(kg)
Size(mm) Φ96×132(H) Φ138×165(H) Φ180×175(H) Φ180×200(H) Φ210×250(H) Φ240×300(H)
105×80 150×120 200×160 200×160 240×190 240×200
Mounting Hole Size(mm)
4–Φ9 4–Φ10 4–Φ10 4–Φ10 4–Φ11 4–Φ10
Weight(kg) 3.5 8.5 15 20 32 40
Output Connector Table Φ26/ M5 Table Φ30/ M5 Table Φ40/ M5 Table Φ50/ M5 Table Φ56/ M5 Table Φ92/ M8
Associated Power
100W 100W/200W 200W/500W 500W/500W 800W 1500W
Amplifier
8.6 Standard Exciter

YMC SVT Series Permanent Magnet Vibration Exciter is a high–quality, compact machine with a permanent magnetic field. It is designed for Vibration testing,
Mechanical impedance measurements, Educational demonstrations, Structural response testing, and Vibration transducer calibration.
YMC SVT–01 YMC SVT–02 YMC SVT–03
Model:YMC SVT–01 SVT–02 SVT–03

Rated Force (N pk) ≥10 ≥45 (60 with air cooling) ≥100(200 with air cooling)
Max. Displacement (pk–pk mm) 4 8 12.7
Max. Velocity:(m/s pk) 1.4 1.65 1.4
Max. Bare Table Acceleration (g pk) 30 (No loading) 50 (No loading) 55 (No loading)
Maximum Input Current: (Arms) 1.8 5 (7 with air cooling) 15 (25 with air cooling)
Frequency Range (Hz) 30 – 22k 10 – 20k 5 – 10k
Effective Moving Mass (Gram) 35 100 190
Table Size(mm) Φ76×75(H) Φ148 ×140(H) Φ190×160(H)
Weight(kg) 1.1 8.5 15
Output Connector TableΦ14/ M5 TableΦ29/ M5 TableΦ40/ M5
Static Flexure Stiffness: N/mm 2 12 5.6
Associated Power Amplifier 60W/100W 100W/200W 200W/500W
P35
8.7 Portable Vibration Calibrator
YMC VC–01 Hand–held Vibration Calibrator：

Rapid judgment measurement system integrity; Rapid measurement the sensitivity of
acceleration/Velocity/Displacement sensors; Battery powered with automatic shutdown; Self–contained
1grms vibration reference; Small size, light weight.
Features:
⚫ Acceleration Amplitude(RMS):9.81m/s2(1g)±3%
⚫ Velocity Amplitude (RMS):9.81mm/s±3%
⚫ Displacement Amplitude (RMS):9.81µm±3%
⚫ Vibration Frequency:159.2Hz±0.5%
⚫ Output waveform: Sine waveform
⚫ Waveform distortion:3%
⚫ Maximum Load:100Gram
⚫ Size: Φ52×155
⚫ Weight:600 gram (with batteries)
YMC VC–02 Portable Vibration Calibrator：
VC–02 is designed to test and calibrate almost all types of vibration transducers and monitoring systems –
in the lab or in the field.VC–02 is a complete, self contained, portable vibration calibrator. Frequency,
vibration amplitude can be continuous adjustble, direct LCD display.
⚫ Vibration Frequency Range:10–10kHz;
⚫ Vibration Amplitude:0–±5grms;
⚫ Input Mode: Charge /IEPE/Voltage /4–20mA/Eddy input;
⚫ Size:300(L)×140(W)×85(H)
⚫ Vibration Frequency:10Hz to 10kHz;
⚫ Dimensions:300×140×85mm;
⚫ Weight:6.5kg;
⚫ Load Range: ≤100Gram(1g);
⚫ Power： 220V50Hz/110V60Hz;
⚫ By test and control software, can finish automatic calibration of vibration sensor Sensitivity,
amplitude /frequency Respone, Non – linearity.
YMC VC–03 Static displacement calibration device
VC–03 is a simple displacement testing and calibration device, using micrometer as displacement
reference , digital display, provide a variety of the clamping fixture, easy clamping sensor; Suitable for static
calibrating and testing YCM401D series displacement sensor.
Measuring Range:0–25mm; Accuracy:±1μm;Size:300 L×140W×85 H; Weight:2.5kg.
8.8 IEPE Sensor Simulator
YMC 8401 IEPE Sensor Simulator

In place of an IEPE sensor and accepts test signals from a voltage function generator. The unit serves to
verify signal conditioning settings, cable integrity, and tune long lines for optimum system performance.
This unit requires power from an IEPE sensor signal conditioner.
⚫ Input Voltage Range: ±5V;
⚫ Input Inpedance:1×108Ω to 1×109Ω;
⚫ Accuracy:1.00 (+0, +2%);
⚫ Output Bias:11V±3VDC;
⚫ Weight:120Gram;
⚫ Noise:<40μV;
⚫ Amplitude Linearity:<2%
⚫ Power Supply:2 to 20mA/+18 to +28VDC;
⚫ Size:60×26×26mm;
8.9 Precision Capacitance Calibration and Charge Attenuator
YMC 8501 Precise Capacitance Calibration

Composed of three kinds of capacitance value precision capacitance:100 pF±0.1%;1000 pF±0.1%;
10nF±0.1%
Using polystyrene capacitor, high precision, low dissipation factor, stable performance. Stainless
steel casing and shield cap. Be used to Charge Amplifier calibration and testing;
YMC 8502 Charge Attenuator
charge attenuation rate:100:1, 200:1, 300:1 (optional);Accuracy:±2%;Temperature Range:–40 to
+80 ℃;Input and output method: BNC; Apply for piezoelectric sensors, such as dynamic force
sensing Chargeoutput beyond the maximum Charge amplifier Measuring Range.
P36
8.10 Vibration/Shock Measurement & Calibration System
8.10.1 VCS–01 Vibration Sensors Calibration System
Calibrated Sensor
Test Report
YMC VCS–01 Consists of： Standard Sensor
1. Standard sensor
2. Standard vibration table Standard Exciter
3. Linear power amplifier
4. Multi–function vibration
analyzer(2–output,4–input)
5. Test and calibration software
Power Amplifier Vibratoion Controller Calibration Software
Features:
1. Back–to–back Secondary Reference;
2. Frequency Range:5 Hz to 30kHz;
3. Vibration Amplitude:0 to 500m/s2(Power Amplifier, Exciter selectable)
4. Auto–calibrating Sensitivity, Linearity, amplitude–frequency characteristic and phase frequency characteristics;
5. calibration method: point by point comparison method, the sine sweep method, the random excitation method;
6. Offer Test Report;
Main parts:
1. Standard sensor: using natural quartz as Sensing Element, High stability, can be used as a sensor calibration;
2. Standard vibration table: please refer to SVT and VT Series vibration table index; The load and Max vibration
level
3. Linear power amplifier: according to the vibration table to select the corresponding power amplifier. Linear
power amplifier with High signal–to–noise ratio, wide frequency range and small distortion;
4. Multi–function vibration analyzer (2 output, 4 input) : high conversion rate of 500 kHz signal output and 1 MHz 4
channel parallel sampling rate, ensure complete and accurate signal;
5. Test and calibration software: according to the conditions set automatically complete all testing, and report
form, and can according to the measured sensor Sensitivity, automatically adjust the internal Gain, to ensure
that the signal–to–noise ratio and testing Accuracy.
Selection guidelines:
1. Standard sensor
YMC271A01: Frequency Range 1 – 6500Hz; YMC271A02: Frequency Range 5 – 15kHz;
2. Standard vibration table
Max. Bare Table

Recommended Power Recommended Standard
Model:YMC Acceleration (g Frequency Range(Hz) Load Capacity (g)
Amplifier Sensor
pk)
SVT–01 30 g 30 – 22k 300 LA–100 YMC271A02
SVT–02 50 g 10 – 20k 1000 LA–200 YMC271A01,YMC271A02
SVT–03 55 g 5 – 10k 1500 LA–500 YMC271A01,YMC271A02

Note: VT Series vibration tables can provide more force output.
P37
8.10.2 Shock Testing System
YMC SVC–01 shock testing system consists of YMC9204H vibration/shock measuring instrument, and YMC9800–05 software;
YMC9204H is Built–in 4 chs Charge amplifiers, IEPE signal conditioners, can input 4 chs Charge, Voltage or IEPE sensors
signal at the same times; Via USB2.0 interface connected with the computer. Bulit–in 2 chs DA signal output, can generate half
sine, trapezoidal wave, after peak sawtooth wave and pulse signal etc. Multi I/O can control and detect shock table. Real–time
display working state, the measured acceleration value, pulse width, and velocity variation, measurement error, etc.;Automatic
finish test report.Support the national standard, MIL standard and custom standard.Appply for all kinds of shock test, drop test,
impact test and vibration/shock test.
YMC 9204H Shock Analyzer Shock Testing Shock Setting Testing Report
Main Parameters:
⚫ Input signal types: Charge (PE), Voltage, IEPE;
⚫ The built–in Gain: Charge 0.1, 1,10,100 mV/pC; Voltage/IEPE:1,10,100 mV/mV;
⚫ The built–in filter: built–in analog filter + digital anti–aliasing filter;
⚫ AD sampling rate: real–time sampling rate per channel 1 MHZ;
⚫ DA conversion rate:500 kHz;
⚫ Sampling method: Iinternal trigger;External triggering; continuous recording etc;
⚫ Measurement Range:1 to 100000 g(PK);
⚫ Measuring pulse width:0.201 mS to 3000 mS;
⚫ 4–input, 2–output;
⚫ Customized software for needs;
Apply for vibration/ shock testing and calibration.;
8.10.3 Vibration Control System
YMC VCS–02 Vibration control system consists of YMC9800–03 vibration control software
and YMC9204H controller. VSC–02 can automatic finish to control according to preseted
vibration level such as vibration acceleration, velocity and force amplitude etc.
8.10.4 Vibration Calibration System
YMC VCS–03 Vibration calibration system consists of YMC9800–03 vibrator test software module,
YMC9204H controller and vibration sensors. Can finish to test and calibrate for almost vibrators
according to relevant national verification regulation. Offers the distortion degree, the transverse
vibration, amplitude uniformity and other related parmeters. Automatically save the result of the test,
easy to make relevant report.
8.10.5 Shock calibration system
YMC SVC–02 Shock calibration system consists of YMC9800–10 shock test software modules,
YMC9204H controller and shock accelerometer. Can finish to test and calibrate almost shock tables
according to the relevant national standard, MIL standard and user–defined standards. Automatically
save the result of the test, easy to make relevant report.
P38
9 Cables & Accessories

9.1 Cables
Code Features
C001 Coaxial Shielded cable SYV–50–2–1(50Ω);Φ3;－40 to +70℃; General purpose
C002 Low Noise cable:STYV–1(Φ2mm);–40–+65℃;<120pF/m; Insulation >1011Ω;
C003 Low Noise cable:STYV–2(Φ3mm),–40–+65℃;<92pF/m; Insulation >1011Ω; Charge (PE)
C004 High Temperature, low noise cable STFF–0.9(Φ2mm); –40 to +220℃;<110pf/m，Insulation >1012Ω; Charge (PE)
C005 Single core, double shielding, low noise cables;Φ3.2;－65 to +200℃; Charge (PE)
C006 Double core, double shielding, low noise cables;;Φ3.5;－65 to +200℃; Charge (PE)
C007 Double core; High Temperature shield cable,Φ5;－65 to +200℃; Industrial sensors (Red)
C008 4 core shielded cable;Φ3;－40 to +150℃;Industrial sensors (Blue)
C009 4 core shielded cable;Φ1.8;－40 to +70℃;Miniature triaxial IEPE sensors
C010 Waterproof shielded cable;Φ3.8;－40 to +150℃; Waterproof sensors
C011 6 core double shielded cable; Φ3.8; Strain Amplifiers and general purpose
C012 Waterproof low noise shielded cable;Φ3.8;－40 to +150℃; Waterproof sensors, Charge output
C013 2 core pin shield spiral cable;Φ 3.8;Straightening length 1.5 m;– 40 – + 120 ℃; handheld instrument
C017 Coaxial Shielded cable SYV–50–1(50Ω);Φ2;－40 to +70℃; General purpose
C018 Coaxial high temperature Shielded cable SYV–50–1(50Ω);Φ2;－40 to +220℃; General purpose(Blue)
Typical Cables
9.2 Adaptors
Code Pictures Code Pictures

M5/M5(Female)
USD3
3–BNC Tee
D001 M5/10–32(Female) D005
(2–Female, 1–Male)
10–32/10–32(Female)
M5/M5(Female)
D002 D007 TNC(Female)/BNC(Female)
10–32/10–32(Female)
BNC(Male)/M5(Female) USD 3
D003 D004 BNC(Female)/BNC(Female)
BNC(Male)/10–32(Female)
P39
9.3 Cable Connectors
Code Features Pictures

F001 M5 Plug (Male)
F101 M5 Socket (Female)
F002 10–32 Plug (Male)
F102 10–32 Socket (Female)
F003 5–44 Plug (Male or Female)
F103 5–44 Socket (Male or Female)
F004 SMA Plug (Male)
F104 SMA Socket (Female)
F005 BNC Plug (Male)
F105 BNC Socket (Female)
F006 TNC Plug (Male)

F106 TNC Socket (Female)
F007 1/4–28 4pin Plug (Female)

F107 1/4–28 4pin Socket (Male)
F008 MIL–C–5015 2pin Plug (Female)
F010 MIL–C–5015 2pin Plug (Bend)(Female)
F108 MIL–C–5015 2pin Socket (Male)
F009 LEMO Plug (Male)
F109 LEMO Socket (Female)
F011 MIL–C–5015 3pin Plug (Female)
F111 MIL–C–5015 3pin Socket (Male)
9.4 Mounting Studs & Stud Adaptors
Mounting Studs: A001 – A×L

Code Thread:A Length: L(mm) Material Pictures
M3, 5-40, 5–44, M5, 10–32, M6,

A001 1/4–28, M8, M10, M12 etc.
Selectable Stainless Steel
Mounting Stud Adaptors: A002 – A/B×LA/LB

Code A B LA(mm) LB(mm) Material Pictures
M3, 5-40, 5–44, M5, M3, 5-40, 5–44, M5,

Stainless
A002 10–32, M6, 1/4–28, M8, 10–32, M6, 1/4–28, Selectable Selectable
M10, M12 etc. M8, M10, M12 etc. Steel
P40
9.5 Mounting Studs with Flange
A003 – A/B
A004 – A/B
Code Size mm Mounting Thread A/B Insulation Material
A003 M5/M5, M5/10–32, M5/M6, M5/M8 – Stainless Steel
Φ20×3(Customized)
A004 etc. Selectable ≥108Ω Anodized Aluminium
A003: Stainless Steel A004: Anodized Aluminium
9.6 Mounting Blocks
9.6.1 Uniaxial Mounting Blocks

Code Size mm Mounting Type Insulation Material
USD5 Φ20×10–M5(Selectable,
E001 Adhesive/Stud – Stainless Steel
Female thread)
Φ20×10–M5(Selectable,
EG001 Adhesive/Stud ≥108Ω Anodized Aluminium
Female thread)
E002 USD5 Φ20×5–M5 (Selectable) Adhesive – Stainless Steel
EG002 Φ20×5–M5 (Selectable) Adhesive ≥108Ω Anodized Aluminium
E001:Stainless Steel EG001: Anodized Aluminium E002:Stainless Steel EG002:Anodized Aluminium
9.6.2 Triaxial Mounting Blocks

Code Size mm Mounting Thread Insulation Material
EG003 ≥108Ω Anodized Aluminium
20×20×20, 30×30×30 M5,10–32 etc Selectable,
EG004 ≥108Ω Polyformaldehyde
Selectable Female thread
E005 USD16 – Stainless Steel
EG003:Anodized Aluminium EG004:Polyformaldehyde(POM) E005:Stainless Steel
P41
9.7 Insulated Magnets
Sensor
Code Force Size (mm) Insulation Pictures
Weight
B001–50N(Plane) 50N Φ13.2×10–M5(Female) ≥108Ω <20grams
USD24
B001–200N(Plane) 200N Φ30×10–1/4–28(Thru-hole) ≥108Ω <150grams
USD32
B001–300N(Plane) 300N Φ40×12–1/4–28(Thru-hole) – <200grams
B002–150N(Curved) 150N Φ26×26–M5(Female) ≥108Ω <100grams
B002–180N(Curved) 180N Φ30×25–M5(Female) ≥108Ω <150grams
B002–220N(Curved) 220N Φ38×25–M10×1.5(Male) ≥108Ω <200grams
B002–300N(Curved) 300N Φ40×25–M10×1.5(Male) ≥108Ω <250grams
9.8 Patch Panel and Multi–conductor Cable
4 channels input (BNC Plug) ,4 chs output(BNC Socket) DB25 input 16 channels BNC output; DB25/DB25 etc.
Customized Customized
9.9 Connector Kit
JX – 001 5–40,M3 Plug Connector Kit
JX – 002 10–32,M5 Plug Connector Kit
JX – 003 1/4–28 4 pin Plug Connector Kit
P42
About Us
www.chinaymc.com
YMC PIEZOTRONICS INC. focuses on Sense technology research, product development and
large–scale production. YMC has set up the technical exchanges and cooperation platform with
many international professional companies and research departments for studying global advanced
sensor test and manufacture technology. YMC has an international team of design development
and application with many years of experience in the vibration testing field. YMC tries to improve
the practicability and reliability of the sensing test and control system, dynamic signal analysis
systems, vibration test and control systems, equipment and environmental monitoring systems and
so on.
As the professional company, YMC could provide almost products and services for your vibration
testing needs!
Our products:
Vibration acceleration, velocity, displacement, dynamic force, pressure sensor
Signal conditioning unit, charge, voltage, IEPE, strain control device
Vibration excitation system, modal vibration force, vibration platform, impact hammer, vibration
calibration device
Dynamic data acquisition system, vibration signal analysis system, modal test and analysis
systems, strain test, impact test system
®
扬州英迈克测控技术有限公司
YMC Piezotronics Inc.
Address: No.47 Xiangyun Road, Yangzhou City, China 225009
E–mail:[email protected]
Phone: +86–514–87960802
Fax: +86–514–87960681
YMC202007· Copyright © YMC Piezotronics Inc.

All right Reserved
P43

YMC PIEZOTRONICS INC. Catalog 2022

Uploaded by

Copyright:

YMC PIEZOTRONICS INC. Catalog 2022

Uploaded by

Document Information

Copyright

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

YMC PIEZOTRONICS INC. Catalog 2022

Uploaded by

Copyright:

INDEX

1. Piezoelectric Vibration Accelerometer ............................................. 3

1. Piezoelectric Vibration Accelerometer

1.1.1 High Shock PE Accelerometer

211A01Z 211A02Z 211A05Z 211A10Z

Frequency 12,000 12,000 12,000 12,000

Φ12╳20 Φ12╳20 Φ12╳20 Φ12╳20

1.1.2 High Shock IEPE Accelerometer

121A01 121A02 121A05 111A01Z 111A02Z 111A05Z

Measuring Range g pk ± 5000 ± 2500 ± 1000 ± 10000 ± 20000 ± 50000

Resolution mg rms 20 10 5 50 100 200

1 – 12,000 1 – 12,000 1 – 12,000

Φ11╳21.3 Φ11╳21.3 Φ11╳21.3 Φ12╳20 Φ12╳20 Φ12╳20

Mounting M5(Female) M5(Female) M5(Female) M5(Male) M5(Male) M5(Male)

1.2 General Purpose Accelerometer

221A10,221A25 221A50,221A100 221A200,221A500 221A1000

Single Axis & High Stability

222A10,222A25 222A50,222A100 222A200,222A500 222A1000

221A10 221A25 221A50 221A100 221A200 221A500 221A1000

Sensitivity pC/g 10 25 50 100 200 500 1200

Measuring Range g pk ±5000 ±2000 ±1000 ±800 ±500 ±150 ±80

±5% Hz 10k 8k 5k 5k 3k 2k 1.5k

9.5 9.5 18 18 28 40 108

Φ13╳26 Φ13╳26 Φ16.2╳27 Φ16.2╳27 Φ18╳28 Φ18╳28 Φ26╳35

Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)

1.2.2 General Purpose Single Axial IEPE Accelerometer

121A10,121A25 121A50,121A100 121A200,121A500 121A1000

122A10,122A25 122A50,122A100 122A200,122A500 122A1000

121A10 121A20 121A50 121A100 121A200 121A500 121A1000

Sensitivity(±10%) mV/g 10 20 50 100 200 500 1000

Measuring Range g pk ±500 ±250 ±100 ±50 ±25 ±10 ±5

Resolution mg rms 2.5 1.5 1 0.5 0.2 0.1 0.05

±5% Hz 1 – 10k 1 – 10k 1 – 8k 1 – 8k 0.5 – 6k 0.5 – 3k 0.3 – 2k

Resonant Frequency kHz 40 40 30 25 15 15 10

Φ11╳21.3 Φ11╳21.3 Φ13╳22 Φ13╳22 Φ18╳28 Φ18╳28 Φ26╳35

Mounting M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female) M5(Female)

1.2.3 General Purpose Triaxial PE Accelerometer

YMC 242A Series YMC 243A Series YMC 245A Series

Model:YMC 242A02 242A05 243A10 243A20 245A10 245A20 245A50

Measuring Range g pk ±2000 ±2000 ±1000 ±1000 ±2000 ±1000 ±1000

Resonant Frequency kHz 25 25 20 20 20 10 8

Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic

Size mm 22╳22╳12 22╳22╳12 25.4╳22╳13 25.4╳22╳13 28╳28╳16 28╳28╳16 32╳32╳18.8

Φ5(Thru–hole)/M6 Thread(bottom)(Z axial)

1.2.4 General Purpose Triaxial IEPE Accelerometer

YMC 143A Series YMC 145A Series YMC 145A200

Model:YMC 143A10 143A20 143A50 145A10 145A20 145A50 145A100 145A200

Sensitivity(±10%) mV/g 10 20 50 10 20 50 100 200

Resolution mg rms 2.5 1.5 1 0.5 0.2 0.1 0.05 0.15

±5% Hz 1 – 5k 1 – 5k 1 – 5k 1 – 5k 1 – 3k 1 – 2k 0.5 – 2k 0.3 – 500

25.4╳22 25.4╳22 25.4╳22 25.4╳ 25.4╳ 25.4╳ 25.4╳

1.3 High Sensitivity Accelerometer

YMC 132A Series

1.4 Miniature Accelerometer

1.4.1 Miniature Single Axial PE Accelerometer

263A03 264A03 266A01

Sensitivity pC/g 3.0 5.0 3.5 3.0 1.5

Measuring Range g pk ±2000 ±2000 ±3000 ±3000 ±2000

±5% Hz 8k 8k 10k 10k 12k

Resonant Frequency kHz 45 30 45 45 50

Sensing Element Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear Ceramic/Shear

M5/5-44 Top 5–44/M3 Side 5–44/M3 Side

Weight g 3.2 6.2 5 5 1.7

Size mm Φ10╳10 10╳10╳10 Φ8╳14.5 Φ8╳11.8 7.5╳11╳4.5