LC-20 VHS

VERTICAL AND HORIZONTAL MILLING MACHINE

STANDARD ACCESSORIES OPTIONAL ACCESSORIES

* ONE SET OF OPERATION TOOLS IN BOX * HALOGEN WORKLIGHT
* ONE SET OF LEVELLING BOLTS, PADS AND NUT * AUTOMATIC LUB. SYSTEM
* HORIZONTAL MILLING ARBOR AND SUPPORT * 1420x260mm LONG TABLE
* LOW VOLTAGE CONTROL SYSTEM * BIG HEAD WITH 5HP VERTICAL SPINDLE
* LONG. FEED GEAR BOX MOTOR AND DRIVE (INFINITELY VARIABLE
* KNEE ELEVATING MOTOR SPEED)
* ONE SHOT LUB. SYSTEM
* COOLANT SYSTEM
* COOLANT TRAY
 UNIT:mm
470(18.5")

15.875(5/8")

16
28
50-470 420-3750

32

2270(89.4")
460(18")
260(10")
130(5") 130(5")

63.5 63.5
(2 1/2") (2 1/2")

925(36.4")

1050(41.7") 680(26.7")
2110(83") 1900(74.8")

SPECIFICATION 20VSG 20VHS

TABLE
Working surface 1300x260 (51"x10") / 1420(56")(option)
Longitudinal travel (Manual Max) 800 (32.5"), 920 (36.2") (Option)
Cross travel 415 (16.3")
Vertical travel (Knee)(Manual Max) 460 (18") 435 (17.1")
Longitudinal feeds 22∼690 (0.8"∼27.2")/Min
Longitudinal rapid feeds 2100 (82.7")/Min
Vertical feeds (knee) 800 (31.5")/Min
MOTOR
Vertical spindle 3HP 4P
Horizontal spindle 5HP 4P
Table longitudinal feed 1/,1/2HP,4/8P
Vertical feeds 1.5HP 6P
Coolant pump 1/8HP
VERTICAL MAIN SPINDLE
Spindle speeds variable (RPM) 50HZ 50∼3750
60HZ 60∼4500
Spindle taper NST 40
Quill travel 127 (5")
Vertical feeds 0.04 0.08 0.16 (0.0016", 0.0031", 0.0063")/Rev
Head swivel (R&L) 90° (F&B) 45°
Overarm travel 470 (18.5")
Overarm swivel 360°
Spindle nose to table 80∼540 (3.1"∼21.3") 115∼550(4.5"∼21.7")

TEL: 04-24733326 生產財設計出版

Spindle centerline to column surface 355∼825 (14"∼32.5")
HORIZONTAL MAIN SPINDLE
Spindle speeds (RPM) 50HZ 45,80,165,260,500,980
60HZ 55,100,200,315,600,1180
Spindle taper NST 40
Spindle centerline to table surface -25∼410 (-1"∼16.1")
R

Spindle centerline to overarm underside 146 (5.7")

Spindle nose to column surface 28 (1.1")
Weight 1800kg (3960Lbs) 2010kg (4420Lbs)
02062804

These specifications are subject to change without notice.

Trust And Reliability

Distributed by:

LONG CHANG MACHINERY CO., LTD.

NO.52, CHARN AN EAST ROAD ,
TAIPING , TAICHUNG, TAIWAN, R.O.C.
TEL: 886-4-23921001
FAX: 886-4-23921037. 23924524
http://www.first.com.tw
E-mail:[email protected]

2002/07/1500
Trust And Reliability
FEATURES
FOR YOUR DAILY REQUIREMENTS.
LC-20 SERIES HEAVY DUTY MILLING MACHINE IS SUITABLE

UNIQUE HEAD TILTING GEAR DRIVEN

SYSTEM HORIZONTAL SPINDLE
The Ram adapter is designed All gears that drive the
with 8 T-bolts clamping horizontal spindle system
system that allows the large are made of alloy steel,
QUILL AND HOUSING vertical head to be tilted at precision ground and
The quill housing is precision all angles, front and back. hardened for heavy cutting
bored and ground. The quill This structure greatly and quiet operation. The
chromed and mirror finished increase the versatility of automatic lub. system keeps
to fit each individual quill the machine to perform the gears lubricated at all
housing. Such close matching complicated work. times. The 5HP motor drive
process offers extreme high with 6 speed changes offers
spindle accuracy. high torque cutting in wide
range of speeds.

EXCLUSIVE VARI-DISC SPINDLE

DESIGN Ni-Cr alloy steel spindle are

To ensure smooth operation supported-by three

under high speed and to super precision

eliminate noise and preloaded

vibration in the vertical angular

head, the vari-disc is treated contact ball

with HD polymer at the bearings. The

inside diameter using a spindle drive can be

patented process.(CNS operated as manual

Patent NO.7225810) feed,micro feed and

automatic feed. It is idea for
precision milling and driling
operations.

ADJUSTABLE
BACKLASH NUT
Backlashes between the nuts
and the leadscrews are
adjustable in this machine so
proper tension may be
maintained periodically. This
works on both the
longitudinal and cross
leadscrews.
 ENLARGED TURRET
商
CLAMPING SURFACE
檢
The matching area where the-
turret is bolted to the column
is usually the weakest area
within the machine. This mode
is designed with an enlarged
matching surface between the
two castings that gives 70%
more contacting area than
other similar models.
It also has a superior locking
machanism that gives more
rigidity to the vertical head and
easier positioning for the
turret.

SWING ARM MOUNTED LUBRICATION SYSTEM

CONTROL PANEL All slideways and leadscrews

All control switches are low are lubricated by a slimple

voltage wired for safety. and reliable one shot lube

The control panel is that reduce service time.

mounted on a swing arm so Automatically timed

it may be moved in or move centralized lubrication

away from operator as system as option. It's deliver

desired. proper oil to all lube points

automaticlly.

BOX WAY DESIGN FOR GEAR DRIVEN

HEAVY DUTY WORK LONGITUDIANL FEED
Both the knee and saddle The table is driven by steel
travel on box ways that gears box with 12 speeds
ensure great stability even change and rapid feed for
under heavy machining positioning of work piece.
conditions. Cross ways are
hardened and ground for
long lasting wear.

TURCITE-B COATED CENTER MOUNTED

WAYS CROSS FEED
Table ways are treated with LEADSCREW
Turcite-B coatings that has The cross feed leadscrew is
excellent oil retention mounted at the middle
properties and high section of the knee (various
resistance to wear. Such others that are mounted at
coatings are normally found the side) to prevent exposure
only in the more expensive of the leadscrew to metal
computer controlled chips, cutting oil and dirt.
machines. Such design enhances the life
of the leadscrew and the nut.
 Trust And Reliability
LC-20 VSG
VERTICAL MILLING MACHINE

STANDARD ACCESSORIES OPTIONAL ACCESSORIES

* ONE SET OF ADJUSTING TOOLS IN BOX * COOLANT SYSTEM
* ONE SET OF LEVELLING BOLTS, PADS AND NUTS * COOLANT TRAY
* LOW VOLTAGE CONTROL SYSTEM * HALOGEN WORKLIGHT
* LONG. FEED GEAR BOX * AUTOMATIC LUB. SYSTEM
* KNEE ELEVATING MOTOR * 1420x260mm LONG TABLE
* ONE SHOT LUB. SYSTEM * BIG HEAD WITH 5HP VERTICAL SPINDLE MOTOR
AND DRIVE (INFINITELY VARIABLE SPEED)
* 127mm (5") TURRET RISER BLOCK