JSS 2 Basic Technology

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

JSS 2 Basic Technology

SECTION A: Answer all questions

1.A first aid box is found in these places EXCEPT...


(a)bridges (b)churches (c)vehicles (d)schools.
2.Which of these materials cannot be found in a first aid box? (a)bandage (b)stapler (c)pair of
scissors (d)iodine.
3.Which of the following first aid treatments is not used in cases of insect stings?(a)applying
soothing lotion (b)apply anti-biotic ointment (c)apply saliva on affected area (d)apply oil
compress.
4.Which of these is not a tool required for rescue operations?(a) rope (b) rescue dog (c)
helicopter (d) motorbike
5. ______________ is the condition of being protected against harm, or accident.
(a) Safety (b) Protection (c) Traffic light (d) Prayer
6. Which of these organizations are not responsible in rescue operations?(a)federal road safety
corps (b)red cross (c)fire brigade (d)standard organization of Nigeria .
7. Which first aid treatment is administered to a patient who fainted?(a)lay the person flat on
their back (b)loosen victims cloth (c)roll victim to the side (d)put a heavy object on the victim’s
body.
8. First aid treatment is given to these health situations EXCEPT....(a)severe bleeding (b)death
(c)poisoning (d)cessation of breathing.
9. ................ Is used to cover wound so as to prevent it from being infected with harmful bacteria
(a) iodine (b) plaster (c) cotton wool (d) sterile gauze
10.The material used in making gloves and sandals is... (a)wood (b)steel (c)aluminium (d)rubber.
11.The main function of foundation in a building is to...(a)distribute the load of the building to
the soil (b)protect the building from high wind (c)carry the weight of the wall (d)bond the wall.
12. One of the following cannot be used to fight large fire accident (a) pure water (b) fire
extinguisher (c) sand bucket (d) fire blanket
13.The following are symptoms of fainting EXCEPT...(a)paleness (b)coldness (c)dancing (d)rapid
impulse.
14. All categories of people are expected to be .............literate.(a)art (b)computer (c)science
(d)technology.
15.Chain is made from.......(a) Aluminium (b)brass (c)cast iron (d)steel.
16.Which of the following metals is used for making the body of an aeroplane ?(a)aluminium
(b)copper (c)lead (d)steel.
17.Examples of educational uses of plastics are these EXCEPT..(a)rulers (b)ball points (c) tiles
(d)set-squares.
18.As a result of the good......ability of rubber,it is used for sandals.(a)insulating (b)elastic
(c)water proof (d)damping.
19.Brass which is a non ferrous alloy metal is useful in making the following products EXCEPT...
(a)knives (b)rivets (c)rods (d)wires.
20............is used for making food processing machine parts.(a)high speed steel (b)mild steel (c)
steel (d)cast iron.
21.Woods or boards are used for the following EXCEPT..(a)housing (b)furniture (c) pulp and paper
(d) circuit board
22.The following are examples of metals EXCEPT...(a)copper (b)lead (c)bronze (d)glass.
23.......is the study of the sizes and shapes of objects (a)geography (b)technical drawing (c)angle
determination (d)geometry.
24.The following are types of triangles EXCEPT.. (a)right angled triangle (b)obtuse triangle
(c)isoceses triangle (d)circular triangle.
25.The following are examples of quadrilaterals EXCEPT (a)square (b)rhombus (c)triangle
(d)rectangle.
26.The sum of angle in a triangle is ....(a)180° (b)90° (c)360° (d)270°
27............... can be defined as an operation organized to free from danger or save life
during dangerous situation. (a) first aid operation (b) rescue operation (c) responsive
operation (d) caring operation
28.The point of meeting between two lines is called.........(a)angle (b)triangles (c)square
(d)polygon.
29.All are properties of metals EXCEPT.. (a)conductivity (b)brittleness (c)hardness (d)coldness.
30.The following are woodwork products EXCEPT..(a)frames (b)boards (c)tables (d)engine.
31.Natural rubber is made from a milky liquid called.....(a)latex (b)rubble (c)sap (d)solution.
32. The spark plug in motorcar engines is a.......product.(a)ceramics (b)metallic (c)non- metallic
(d)rubber.
33. In pottery, clay is mixed with water and pounded to remove......(a)air bubbles (b)excess heat
(c)sand content (d)water log.
34. Fuel is a source of_______.
(a) Light energy (b) Chemical energy (c) Nuclear energy (d) Heat energy
35. Any substance capable of holding or bonding two pieces of wooden material together is (a)
abrasive (b) latex (c) adhesive (d) super glue
36. Workshop accident includes the following except. (a) fracture (b) bleeding (c) plastering (d)
wound
37.A regular polygon with nine sides is called... (a)hexagon (b)decagon (c)heptagon (d)nonagon.
38.To measure and draw various angles you need a....(a)template (b)set-square (c)protractor
(d)French curve.
39.A trapezium is also a..... (a)triangle (b)parallelogram (c)pentagon (d) quadrilateral.
40. To avoid accident in the workshop, you must do the following EXCEPT
(a) lacking of manufacture‘s or personnel‘s instructions (b) always use right tool for each job (b)
avoid using worn-out faulty tools (d) do not welcome distractions while working

SECTION B
Attempt 2 out of 4 questions

QUESTION 1
Ai. How is first aid applicable in the workshop?
ii. Explain the meaning of ABC in First Aid.
B. As a First Aider, list 3 characteristics you must have in administering first aid to a person who
got bitten by a snake.
QUESTION 2
A. List two (2) uses of all the types of materials each;
B. In the smelting of iron ore, expatiate the process till steel is produced.

QUESTION 3
A. List the 5 types of manufactured board and explain two.
B. Calculate the percentage moisture content in a sample of wood which is found to be 80gm
before seasoning and 50gm after seasoning.

QUESTION 4
A. Give two differences between
i. plastic and rubber
ii. Metals and wood
iii. Concrete and glass
iv. Transparent and translucent glass
B. List 3 types of finishing in metals

You might also like