Scribd
Upload
46 views1 page

Inspections Report WPQR - 2

This inspection report summarizes the welding parameters used to weld two base materials, DX51D+Z and G3Si1 filler wire. The report lists the welding process as 135, using 0.8mm diameter G3Si1 filler wire. It provides the current, voltage, welding time and other parameters for the root and first layer of the weld. The inspection found the parameters were within specification.

Uploaded by

cornel pintilie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
46 views1 page

Inspections Report WPQR - 2

This inspection report summarizes the welding parameters used to weld two base materials, DX51D+Z and G3Si1 filler wire. The report lists the welding process as 135, using 0.8mm diameter G3Si1 filler wire. It provides the current, voltage, welding time and other parameters for the root and first layer of the weld. The inspection found the parameters were within specification.

Uploaded by

cornel pintilie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION REPORT

Welding parameters monitoring for WPQR


Company: PALMEX CM GALATI
Welder: TUFARU COSTEL Welder stamp:2
pWPS: 2/2023 Welding Process: 135 Date:19.09.2023
Base material 1: DX51D+Z Filler material 1: G3Si1

FM1
Norme: EN 10346 Norme: EN ISO 14341-A
BM1

Heat number: P2C0967 Heat number: 1150170072


Dimensions: 3mm Dimensions: 0.08 mm
Base material 1: DX51D+Z Filler material 2:

FM2
Norme: EN 10346 Norme:
BM2

Heat number: P2C0967 Heat number:


Dimensions: 3mm Dimensions:
Welding Postions : PF+ PC
Remarks

Preparation joint Order of welding operations

MB1 2
1
MB2

MB1 MB2

Welding Current Interpass


Current Voltage Length of
Layer Process Filler material time tipe/ temp.
(A) (V) weld (mm)
(s) Polarity (°C)
root 135 Φ 0.8 mm 100 17 62 CC 350 118
1 135 Φ 0.8 mm 141 20 95 CC 350 127

TÜV Representative: Company Representative :

You might also like