Scribd
Upload
6 views

Assignment 2

This assignment contains 16 questions assessing students' understanding of circuit analysis in the time domain (CLO-1, mapped to PLO-1). The questions cover analysis of RL, RC, and RLC circuits in various configurations, including step responses. Students are asked to determine time constants, initial and final voltages/currents, equations for voltage and current over time, and calculate the percentage of initial energy stored in an inductor that is dissipated. The assignment requires analysis and calculation at the analysis cognitive level.

Uploaded by

Saleh Rashid
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6 views

Assignment 2

This assignment contains 16 questions assessing students' understanding of circuit analysis in the time domain (CLO-1, mapped to PLO-1). The questions cover analysis of RL, RC, and RLC circuits in various configurations, including step responses. Students are asked to determine time constants, initial and final voltages/currents, equations for voltage and current over time, and calculate the percentage of initial energy stored in an inductor that is dissipated. The assignment requires analysis and calculation at the analysis cognitive level.

Uploaded by

Saleh Rashid
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Assignment 2

This Assignment is to check CLO-1: (Analysis of circuits in time domain), which is mapped under
PLO-1: (Engineering Knowledge). All questions carry equal marks. (Total Marks 160)
Source free RL Circuit
Q1) The switch in the circuit in figure shown below has been in position 1 for a long time. At the switch moves
instantaneously to position 2. Solve 10-marks (Cognitive level - 3)
A. the initial energy stored in inductor
B. Vo(t) for t≥0.
C. What percentage of the initial energy stored in the inductor is eventually dissipated in the 6Ω resistor?

Q2) In the circuit shown below if voltage and current equations are shown:
10-marks (Cognitive level - 3)

Calculate 𝞃, value of R and L and initial energy stored in Inductor.

Q3) Determine the time constant for the circuits shown below.

10-marks (Cognitive level - 3)


Q4) Consider the circuit in Figure below. If Vo(0)= 10 V, find vo(t) and vx(t) for t > 0.
10-marks (Cognitive level - 3)

Source free RC Circuit


Q5) The switch shown in figure below has been open for a long time before closing at t=0. Calculate
10-marks (Cognitive level - 3)
A. V(t) for t≥0.
B. the initial energy stored in the capacitor.

Q6) Calculate the time constant for the circuits shown below.

10-marks (Cognitive level - 3)

Q7) In the circuit shown below if voltage and current equations are shown:
10-marks (Cognitive level - 3)

Find 𝞃, value of R and C and initial energy stored in Capacitor.


Q8) The switch in figure below has been in position A for a long time and is moved to position B at t = 0s, then
at t = 1s, the switch moves from B to C. Solve for vC (t) for t ≥ 0.
10-marks (Cognitive level - 3)

Step response of RC Circuit


Q9) The switch in Figure below has been in position a for a long time. At t=0 it moves to position b. Calculate
i(t) for all t > 0. Assume Vc (0)= 0 V.
10-marks (Cognitive level - 3)

Q10)

a)For the circuit in Figure below, is(t) = 5 u(t), solve v(t).

10-marks (Cognitive level - 3)

b)If the waveform in figure below is applied to the circuit shown above. Solve for v(t). Let, v(0) = 0V.

10-marks (Cognitive level - 3)


Q11) The switch in the Figure below a for a long time. At the switch is moved to position b. Calculate (a) the initial
voltage on the capacitor; (b) the final voltage on the capacitor; (c) the time constant (in microseconds) for t > 0. d)
Equation for Vc(t).

10-marks (Cognitive level - 3)

Q12) The switch in the circuit seen in figure below has been in position a for a long time. At t = 0 the switch moves
instantaneously to position b. Calculate V0(t) and i0(t) for t ≥ 0.

10-marks (Cognitive level - 3)

Step response of RL Circuit


Q13) Find v(t) for t > 0 in the circuit of figure below, if the initial current in the inductor is zero.
10-marks (Cognitive level - 3)

Q14) Obtain v(t) and i(t) in the circuit of Figure shown below.
10-marks (Cognitive level - 3)
Q15) If the input pulse in Figure (left) is applied to the circuit in Figure (right), determine the response i(t).

10-marks (Cognitive level - 3)

Q16) The switch in the circuit shown in Figure below has been in position a for a long time. At the switch moves
instantaneously to position b. Find the numerical expression for i0 (t) when t ≥ 0. Find the numerical expression for v0 (t)
when t ≥ 0.

10-marks (Cognitive level - 3)

You might also like