Cement Englishonly

Minerals Processing Industry
Cement & Lime
Global Innovation for your High Temp World

Mission Statement
Division of Fedmet Resources Corporation:

Fedmet provides profitable solutions contributing to the
well-being of its employees and stakeholders. We achieve our
objectives by offering competitive and sustainable solutions that
provide long term value to our clients and vendors. We will always
choose to do the right thing.
1 Global Innovation for your High Temp World

Introduction
Division of Fedmet Resources Corporation:

Fedmet provides quality engineered products and services for all your high temperature applications.
For over 20 years, Fedmet has provided outstanding results for our clients within the iron, steel and non-ferrous
industries. Our company’s reputation is built on delivering high quality products made with the world’s best
raw materials.
We give you a competitive advantage by offering you superior proven products that positively impact your
bottom line, perform better and are safer.
Our experts in the minerals processing industry provide the products and services that you need to successfully run
your plant. We offer basic brick for transition and burning zones in cement and lime kilns. Additionally, we carry a
magnesia enriched dolomite brick for cement burning zones, and a wide range of high alumina brick for calcining
and feed zones.
Our knowledgeable engineers ensure the proper application of our products to give you the maximum level of
output and safety.
Fedmet is committed to providing outstanding service and solutions to each and every customer, by dedicating
its vast global resources.
www.fedmet.com 2
About Us
Background information:
• Fedmet is a leading refractories supplier to North, Central and South America.
• Global Offices:
o North America: United States and Canada
o South America: Columbia
o Asia: China
o Europe: England
Fedmet facts:
• Our quality control employees thoroughly inspect each shipment to ensure the products are
within specification and are properly packaged.
• Our 25+ warehouse facilities in the United States, Canada, Mexico and South America assure
your products are readily available when you need them in these regions.
• Sales force and service needs are available in the following:
o North America
o Central America
o South America
o Europe
o Middle East
• All of our products for the cement and lime minerals processing industry are manufactured
in state of the art, ISO 9001-governed manufacturing facilities, delivering the best
performance/lowest cost ratio for your kiln in the world.

Why Fedmet?
Why Fedmet:
Our experts and service staff are there for you when you need it. We will be present at all kiln relines and
delines. We provide a product performance report at trial completion.
Our goal is to study your operation, propose solutions, and ultimately lower your cost per ton of clinker
produced and/or kg/ton clinker refractory consumed.
Global operations enable us to competitively provide all brick for any area of the cement or lime rotary
kiln. We also supply castables for the static plant. These products would include MgO alumina spinel,
MgO -Fe spinel, dolomite, alumina and alumina/silicon carbide castables.
Our strong relationships with global enterprises, primarily in strategic raw materials, ensure availability,
price stability and consistent high quality.
We have on-staff engineers, product managers and quality control teams who travel around the world to
produce high-end products from only the best raw material to generate superior results for our customers.
www.fedmet.com 4
Kiln Brick
Fedmet can supply brick for ALL kiln zones;

MgO-alumina spinal, MgO-iron spinel, dolomite and high
alumina shapes manufactured in state of the art,
ISO controlled plants.

Providing Solutions
Fedmet provides high temperature solutions for your cement or lime kiln
problem areas:
• We are positioned to supply all of your refractory requirements in the mineral processing area.
We have you covered in the rotary kiln, static tower and cooler sections of your plant.
• We offer magnesite-alumina spinel, magnesite-iron spinel, dolomite and high alumina brick in
both VDZ and ISO shapes.
• For the static tower we supply a full range of plastics, light weight castables, silicon carbide
monolithitics and gunite materials.
• Our plants are ISO 9001 certified and own/control their raw material feedstocks.
Fedmet understands your needs:

• We are your answer to the metrics of mean time between refractory failure, kiln availability and
refractory gram consumed per clinker ton.
• We provide reliable and consistent refractory supply, performance and the most advanced kiln
refractories the world has to offer.
• Our company delivers service before, during and after the brick is installed.
• We offer refractory products which are being used in over 17% of the kilns in the world!
www.fedmet.com 6
Recommendations
TYPICAL BRICK RECOMMENDED
Zone Quality
Discharge Epic 60/70 PH
Lower Transition Fedmag 92, Fedmag 87, Hercules
Sintering Paragon MC20A, Hercules
Calcining Epic 70
Feed End Epic 60 PH/Castable

Recommendations
TYPICAL RECOMMENDATIONS FOR THE COOLER
Zone Quality
Cooler Bend Epic 80 SC
Cooler Roof Epic 80 SC
Cooler Walls Epic 60
Hot Zones Epic 80 SC
Cooler Discharge Epic 70 PH
www.fedmet.com 8
Recommendations
TYPICAL RECOMMENDATIONS FOR PREHEATER/PRECALCINER KILN PROCESS
Zone Quality
Discharge Epic 70 PH
Lower Transition Fedmag 92, Fedmag 87, Hercules
Sintering Paragon MC20A, Hercules
Upper Transition Fedmag 92, Fedmag 87, Hercules
Calcining Epic 70
Feed End Epic 60

Recommendations
Fedmet Refractories for

the Static Tower
Static Tower/Ancillary Areas- Fedmet Product Selections
Cyclones; Fedcon 28P, Fedcon 30, 32 or 32-80
Precalciner; Fedcon28P, Fedcon30 or 32 family
Riser Duct
Primary lining; Fedcon SiC family or AZS family
Backup lining; Fedlite 60 or 80 family
Feed Shelf; Fedcon AZS, Fedcon 31, 32, or 32-80 family
Rotary Kiln Specialties
Nose Ring to Transition; Fedcon 31, 32, or 32-80 family
Firing Hood; Fedcon 30 family or Fedfire family
Tertiary Air Duct; Fedcon28P or Fedcon30 family
Cooler; Fedcon AZS, Fedcon 30, 31 or 32 family
www.fedmet.com 10
Division of Fedmet Resources Corporation
Canada
P.O. Box 278
Westmount Station
Montreal, Quebec H3Z 2T2
Phone: 1-800-609-5711
Fax: 1-514-931-8378
United States
1000 N.West Street, Suite 200 #889
Wilmington, DE 19801
Republic of China
Dalian
www.fedmet.com
Global Innovation for your High Temp World

Cement Englishonly

Uploaded by

Copyright:

Available Formats

Cement Englishonly

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cement Englishonly

Uploaded by

Copyright:

Available Formats

Minerals Processing Industry

Cement & Lime

Global Innovation for your High Temp World

Division of Fedmet Resources Corporation:

1 Global Innovation for your High Temp World

Division of Fedmet Resources Corporation:

3 Global Innovation for your High Temp World

Fedmet can supply brick for ALL kiln zones;

5 Global Innovation for your High Temp World

Fedmet understands your needs:

TYPICAL BRICK RECOMMENDED

7 Global Innovation for your High Temp World

TYPICAL RECOMMENDATIONS FOR THE COOLER

TYPICAL RECOMMENDATIONS FOR PREHEATER/PRECALCINER KILN PROCESS

9 Global Innovation for your High Temp World

Fedmet Refractories for

Global Innovation for your High Temp World

You might also like