Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    A - V Waterjet Parts Manual v1.7

    Uploaded by

    Robert Morrell
    This document is a parts manual from A&V Waterjet Tech Inc. that contains the following information: 1) It recommends using genuine A&V spare parts like orifices and nozzles to avoid defects that could impact the first year warranty. 2) It provides exploded diagrams and part numbers for key waterjet intensifier parts like the piston assembly, high pressure cylinder, and end cap. 3) It also details the on/off valve assembly parts including the actuator, pressure screw, and cutting head. New high accuracy nozzle bodies and cutting heads are highlighted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    A - V Waterjet Parts Manual v1.7

    Uploaded by

    Robert Morrell
    55 views14 pages
    This document is a parts manual from A&V Waterjet Tech Inc. that contains the following information: 1) It recommends using genuine A&V spare parts like orifices and nozzles to avoid defects that could impact the first year warranty. 2) It provides exploded diagrams and part numbers for key waterjet intensifier parts like the piston assembly, high pressure cylinder, and end cap. 3) It also details the on/off valve assembly parts including the actuator, pressure screw, and cutting head. New high accuracy nozzle bodies and cutting heads are highlighted.

    Original Title

    A_V Waterjet Parts Manual v1.7

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a parts manual from A&V Waterjet Tech Inc. that contains the following information: 1) It recommends using genuine A&V spare parts like orifices and nozzles to avoid defects that could impact the first year warranty. 2) It provides exploded diagrams and part numbers for key waterjet intensifier parts like the piston assembly, high pressure cylinder, and end cap. 3) It also details the on/off valve assembly parts including the actuator, pressure screw, and cutting head. New high accuracy nozzle bodies and cutting heads are highlighted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views14 pages

    A - V Waterjet Parts Manual v1.7

    Uploaded by

    Robert Morrell
    This document is a parts manual from A&V Waterjet Tech Inc. that contains the following information: 1) It recommends using genuine A&V spare parts like orifices and nozzles to avoid defects that could impact the first year warranty. 2) It provides exploded diagrams and part numbers for key waterjet intensifier parts like the piston assembly, high pressure cylinder, and end cap. 3) It also details the on/off valve assembly parts including the actuator, pressure screw, and cutting head. New high accuracy nozzle bodies and cutting heads are highlighted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 14

    PARTS MANUAL

    May 2017

    A&V Waterjet Tech Inc.


    Office: (262)250-8100
    Fax: (262)250-8690
    www.avwaterjet.com

    1
    It is strongly recommended to use A&V spare parts including
    orifice and nozzles. Any possible defects that may cause by not
    using A&V Waterjet spare parts could result in earlier termination
    of first year warranty

    2
    Office: (262)250-8100 Fax: (262)250-8690

    PART 1.Intensifier

    Figure.1

    A: low pressure cylinder (110-20003-0101)


    B: piston assembly (figure.2)
    C: end bell (figure.5)
    D: High-pressure cylinder assembly (figure.3)
    E: end cap (figure.4)
    F: tie rod
    G: tie rod nut
    H: magnetic sensor switch

    3
    Office: (262)250-8100 Fax: (262)250-8690

    1. Piston assembly

    Figure.2

    A: obturating rings assembly (17-900017-02232)


    B: Piston (110-20053-0101)
    C: White O-ring (110-20001-0101)
    D: Black O-ring (210-08030-01)
    E: White O-ring (110-20001-0101)
    F: spacer
    G: snap ring (202-89378-02)
    H: plunger (110-20004-0101)

    4
    Office: (262)250-8100 Fax: (262)250-8690

    2. High-pressure Cylinder

    Figure.3

    A: high-pressure cylinder (110-20082-0101)


    B: seal back-up sleeve (110-20038-0101)
    C: O-RING *
    D: seal plunger *
    E: SEAL HOOP *
    F: SEAL RING (110-20039-0101)
    *For C, D, E, a package (110-20078-0101) contains all these three parts.

    5
    Office: (262)250-8100 Fax: (262)250-8690

    3. End Cap

    Figure.4

    A: end cap (110-20047-0102)


    B: outlet check valve (110-20076-0101)*
    C: Outlet poppet (110-20075-0101)
    D: choke plug valve pad (110-20074-0101)
    E: Fast-plug connectors (205-31214-0101)
    F: chock valve body (110-20081-0101)
    G: Inlet poppet (110-20150-0101)
    H: Inlet poppet housing (110-10132-0101)**
    I: retaining screw (110-10133-0101)
    J: O-RING1 (210-07335-10)
    K: O-RING2 (210-07335-10)

    *There is a spring in B. Check valve spring (110-20084-0101)


    **
    There is a locating pin here. (211-22508-10)

    6
    Office: (262)250-8100 Fax: (262)250-8690

    7
    Office: (262)250-8100 Fax: (262)250-8690

    4. End bell

    Figure.5

    A: end bell (110-20048-SY-01 110-20049-SY01)


    B: Electric sensor suite (107-11057-0101)
    C: O-ring (11680-240 and 11679-240)
    D: sleeve guide
    E: U-ring (206-12100-01)
    F: spacer
    G: snap ring (202-89334-01)

    8
    Office: (262)250-8100 Fax: (262)250-8690

    PART 2. On/off valve assembly

    Figure.6
    A: Actuator assembly (205-00015-01-1)
    B: Pressure screw (110-20196-0101)
    C: Gasket (110-20197-0101)
    D: Pressure valve seal (110-20198-0101)
    E: O-ring (210-AS006-01)
    F: Needle valve (110-20199-0101)
    G: On/off valve body (110-20195-0101)
    H：Mounting collar
    I：Poppet seat (110-20193-0101)
    J：O-ring (210-07125-10)
    K：Nozzle body (110-20200-0103)
    L：Orifice mount assembly*
    M：Cutting head (110-21018-0101) **
    N：Narrow nozzle nut (110-21018-0101) **
    O：Nozzle (218-23005-01)
    P：Dust guard ***

    9
    *There are three kind orifice: Normal orifice; Diamond orifice; Pure water orifice.
    ** For M, N, a package (110-21018-0101) contain these two parts.
    ** For N, there is a small plastic retainer collet which is already in it. The plastic retainer
    collet can be ordered by number (110-20203-0101).
    *** For P, for 3-axis and 4-axis, the part number of the dust guard is (110-20189-0101);
    For 5-axis, the part number of the dust guard is (110-20185-0101 ).

    10
    Office: (262)250-8100 Fax: (262)250-8690

    Figure.7
    11
    Office: (262)250-8100 Fax: (262)250-8690

    Figure. 8
    A: new high accuracy nozzle body 3-axis (110-20200-s002)
    B: new high accuracy nozzle body 4-axis (108-10186-DW01)
    C: new high accuracy cutting head (110-21046-0101)
    D: nozzle body 3-axis (110-20200-0103)
    12
    Office: (262)250-8100 Fax: (262)250-8690

    E: nozzle body 4-axis (108-10186-0102)


    F: cutting head (110-21018-0101)
    G: rotating shaft 110-20152-0101
    H: rotating joint (108-11017-0101)

    13
    Office: (262)250-8100 Fax: (262)250-8690

    14

    You might also like