Chapter 8 - Simulation

By: Getachew Gobena (Asst. Prof.)

1
 Concepts of Simulation
A set of assumptions
Real-world
Modeling
process concerning the behavior of a & Analysis
system
Simulation
 the imitation of the operation of a real-world process or system over
time
 to develop a set of assumptions of mathematical, logical, and
symbolic relationship between the entities of interest, of the system.
 to estimate the measures of performance of the system with the
simulation-generated data

Simulation modeling can be used

 as an analysis tool for predicting the effect of changes to existing
systems
 as a design tool to predict the performance of new systems 2
 Definitions of Simulation
• What is simulation?
Banks, et al:
• "A simulation is the imitation of the operation of a
real-world process or system over time". It "involves
the generation of an artificial history of a system, and
the observation of that artificial history to draw
inferences … "
Law & Kelton:
• "In a simulation we use a computer to evaluate a
model (of a system) numerically, and data are
gathered in order to estimate the desired true
characteristics of the model"
3
 Simulation . . .
More specifically (but still superficially)
• We develop a model of some real-world system that
(we hope) represents the essential characteristics of
that system
– Does not need to exactly represent the system –
just the relevant parts
• We use a program (usually) to test / analyze that
model
– Carefully choosing input and output
• We use the results of the program to make some
deductions about the real-world system
 http://en.wikipedia.org/wiki/Computer_simulation
• Some interesting info here
4
 When to use Simulation . . .
• Why (or when) do we use simulation?
• This is fairly intuitive
Consider arbitrary large system X
• Could be a computer system, a highway, a factory, a
space probe, etc.
We'd like to evaluate X under different conditions
• Option 1: Build system X and generate the conditions,
then examine the results
– This is not always feasible for many reasons:
> X may be difficult to build
> X may be expensive to build
> We may not want to build X unless it is "worthwhile"
> The conditions that we are testing may be difficult or
expensive to generate for the real system
5
Applications of Simulation (Examples)
A company needs to increase its production and
needs to decide whether it should build a new plant or
it should try to increase production in the plants it
already has
– Which option is more cost-effective for the company?
Clearly, building the new plant would be very
expensive and would not be desirable to do unless it
is the more cost-effective solution
But how can we know this unless we have built the
new plant?
Another (ongoing) example:
• NASA wants to know if damage on the Space Shuttle will threaten
it upon re-entry
• If they wait until re-entry
6 to make a judgment, it is already too late
 Introduction to Simulation

• Option 2: Model system X, simulate the conditions

and use the simulation results to decide
– Continuing with the same first example:
– Model both possibilities for increasing production and
simulate them both
> We then choose the solution that is most economically
feasible
– Continuing with the Space Shuttle example
– Model the damage and the stress that re-entry
imparts on the shuttle
> Determine via a simulation if the damage will threaten
the shuttle or not
> Note the importance of being correct here

7
Why to use simulation? . . .
• Clearly, this is itself not a trivial task
– Simulations are often large, complex and difficult to
develop
– Just developing the correct system model can be a
daunting task
> There are many variables that must be taken into account
– However, if a new plant costs hundreds of millions
or even billions of dollars, spending on the order of
thousands (or even hundreds of thousands) of
dollars on a simulation could be a bargain
– Note that with the Shuttle example, most of the
work for this must be done in advance
> Don't have time to design & implement this during the
duration of a flight
8
Flight Dec Cabin simulator for Main & Copilot
Car driving simulator
When Simulation is the Appropriate Tool (1)

Simulation enables the study of, and experimentation with, the

internal interactions of a complex system, or of a subsystem
within a complex system.
Informational, organizational, and environmental changes can
be simulated, and the effect of these alterations on the model’s
behavior can be observed.
The knowledge gained in designing a simulation model may be
of great value toward suggesting improvement in the system
under investigation.
By changing simulation inputs and observing the resulting
outputs, valuable insight may be obtained into which variables
are most important and how variables interact.
Simulation can be used as a pedagogical device to reinforce
analytic solution methodologies.
13
When Simulation is the Appropriate Tool (2)
Simulation can be used to experiment with new designs or
policies prior to implementation, so as to prepare for what
may happen.
Simulation can be used to verify analytic solutions.
By simulating different capabilities for a machine,
requirements can be determined.
Simulation models designed for training allow learning
without the cost and disruption of on-the-job learning.
Animation shows a system in simulated operation so that the
plan can be visualized.
The modern system (factory, wafer fabrication plant, service
organization, etc.) is so complex that the interactions can be
treated only through simulation.
14
 When Simulation is not Appropriate
When the problem can be solved using common sense.
When the problem can be solved analytically.
When it is easier to perform direct experiments.
When the simulation costs exceed the savings.
When the resources or time are not available.
When system behavior is too complex or can’t be defined.
When there isn’t the ability to verify and validate the model.

15
Advantages and Disadvantages of Simulation (1)
Advantages
 New polices, operating procedures, decision rules, information flows,
organizational procedures, and so on can be explored without disrupting
ongoing operations of the real system.
 New hardware designs, physical layouts, transportation systems, and so
on, can be tested without committing resources for their acquisition.
 Hypotheses about how or why certain phenomena occur can be tested
for feasibility.
 Insight can be obtained about the interaction of variables.
 Insight can be obtained about the importance of variables to the
performance of the system.
 Bottleneck analysis can be performed indicating where work-in-process,
information, materials, and so on are being excessively delayed.
 A simulation study can help in understanding how the system operates
rather than how individuals think the system operates.
 “What-if” questions can be answered. This is particularly useful in the
design of new system.
16
Advantages and Disadvantages of Simulation (2)
Disadvantages
 Model building requires special training. It is an art that is learned
over time and through experience. Furthermore, if two models are
constructed by two competent individuals, they may have similarities,
but it is highly unlikely that they will be the same.
 Simulation results may be difficult to interpret. Since most simulation
outputs are essentially random variables (they are usually based on
random inputs), it may be hard to determine whether an observation is
a result of system interrelationships or randomness.
 Simulation modeling and analysis can be time consuming and
expensive. Skimping on resources for modeling and analysis may
result in a simulation model or analysis that is not sufficient for the
task.
 Simulation is used in some cases when an analytical solution is
possible, or even preferable. This might be particularly true in the
simulation of some waiting lines where closed-form queueing models
are available. 17
 Areas of Application (1)
WSC(Winter Simulation Conference) : http://www.wintersim.org
 Manufacturing Applications
 Analysis of electronics assembly operations
 Design and evaluation of a selective assembly station for high-precision
scroll compressor shells
 Comparison of dispatching rules for semiconductor manufacturing using
large-facility models
 Evaluation of cluster tool throughput for thin-film head production
 Determining optimal lot size for a semiconductor back-end factory
 Optimization of cycle time and utilization in semiconductor test
manufacturing
 Analysis of storage and retrieval strategies in a warehouse
 Investigation of dynamics in a service-oriented supply chain
 Model for an Army chemical munitions disposal facility
 Semiconductor Manufacturing
 Comparison of dispatching rules using large-facility models
 The corrupting influence of variability
 A new lot-release rule for wafer fabs 18
 Areas of Application (2)
 Assessment of potential gains in productivity due to proactive reticle
management
 Comparison of a 200-mm and 300-mm X-ray lithography cell
 Capacity planning with time constraints between operations
 300-mm logistic system risk reduction
 Construction Engineering
 Construction of a dam embankment
 Trenchless renewal of underground urban infrastructures
 Activity scheduling in a dynamic, multi-project setting
 Investigation of the structural steel erection process
 Special-purpose template for utility tunnel construction
 Military Application
 Modeling leadership effects and recruit type in an Army recruiting station
 Design and test of an intelligent controller for autonomous underwater
vehicles
 Modeling military requirements for nonwarfighting operations
 Multi-trajectory performance for varying scenario sizes
 Using adaptive agent in U.S Air Force pilot retention 19
 Areas of Application (3)
 Logistics, Transportation, and Distribution Applications
 Evaluating the potential benefits of a rail-traffic planning algorithm
 Evaluating strategies to improve railroad performance
 Parametric modeling in rail-capacity planning
 Analysis of passenger flows in an airport terminal
 Proactive flight-schedule evaluation
 Logistics issues in autonomous food production systems for
extended-duration space exploration
 Sizing industrial rail-car fleets
 Product distribution in the newspaper industry
 Design of a toll plaza
 Choosing between rental-car locations
 Quick-response replenishment

20
 Areas of Application (4)

 Business Process Simulation

 Impact of connection bank redesign on airport gate
assignment
 Product development program planning
 Reconciliation of business and systems modeling
 Personnel forecasting and strategic workforce
planning
 Human Systems
 Modeling human performance in complex systems
 Studying the human element in air traffic control

21
20/02/2023 Getachew Gobena (Asst. Prof.) 22