.

Iván Ernesto Ochoa Romero

10 years of experience in quality engineering department and 17 years of
experience in product quality related to the manufacture of aerospace
products. I am the type of person who likes to be focused and committed
to completing tasks on time. Extensive experience in personnel and
technical management applied to inspection of finished product
processes and procedures established as well as or process development.

PERSONAL INFORMATION EDUCATION

Paseo de real, cerrada de Industrial Engineering – Production Systems Specialty
los duques #21, 83287, Universidad Interamericana de Guaymas - Guaymas, SON
Hermosilo, Son.

(52) 622 125 4223

WORK EXPERIENCE
Sr. NPI Quality Assurance Engineer 07/2020 - Current
[email protected]
AT Engine México. – Hermosillo, SON

 Perform work instruction for in-process inspection and

APTITUDES final inspection based on our internal and final customer
requirements.
 Leadership.
 Creation of full and partial e-CAV's (FAIR process]) and SPS's.
 Capacity for initiative.
 MRB controller, disposition for non-conformace material,
 Teamwork.
and non-conformaces leader.
 Personnel management.  Lean Six Sigma tools (5W, 8D, PFMEA, Fishbone diagram, etc.)
 High responsibility.  Incoming Inspection leader, handle responsibilities of

 Creativity. conducting source inspections of subcontractors and

suppliers.
 Flexibility.
 Capability study, MSA and gage R&R .
 PFMEA, APQP development.
 NPI, review customer DWG designs.
SKILLS:
 Inspection equipment process development for in-process
Microsoft Office and final inspection to comply with customer requirements.

Measuring instruments  Gen-spec programmer.

MRP system  Handle duties such developing and formulating quality assurance
policies and procedures.

.
.

Used and acknowledge for

quality tools
 Arrange with engineering team and customers on quality related
FPI Level II Certification (2007-
issues.
2020),
 Responsible for conducting training sessions on quality assurance
DSQR certification.
tools and concepts for junior engineers and technical.
PFMEA certification
 Full acknowledge on GD&T (ASME Y14.5)

Course in root cause analysis

and corrective actions
Quality Assurance Engineer 06/2015 - 05/2020
FPI process equipment.
Maquilas Tetakawi (Paradigm Precision) - Guaymas, SON

 Development of first articles based on AS 9100 Rev D.

LENGUAGES:
 Review contracts and purchase orders of the product
(including drawing dimensional, as well as specifications
Fluent in Spanish (1 Language)
st
that are included into the documents).
Fluent in English (1 Language)
st
 Internal auditor in AS 9100 Rev D. based on ISO 9001 :2015 &
ISO 19011:2018.
 Use of GE and RR web sites (check sheet revision,
specification revisions, CR system, etc.).
 Performing total and partial e-CAV's and SPS's.
 FPI level II certification (NAS-410) and Etching process.
 Knowledge in DG&T and drawing interpretation.
 Development of reports for reduction of non-conforming
material, application of quality tools (cause and effect
diagram, Pareto diagram, flowchart, 5 why etc.
 Non-conforming material disposition.
 Assistance to production area for interpretation of
drawings and machining features according to the
customer's requirements.
 Basic CMM usage and programming.
 Handling and acknowledge for measuring instruments
(caliper, micrometer, Digital and analog optical comparator,
height meter, Mueller bar, Pi-Tape, o-mega, anvil, ultrasonic
for thicknesses, and others).
 PFMEA, MSA.

Quality Supervisor 02/2013 - 05/2015

Maquilas Tetakawi (Paradigm Precision) - Guaymas, SON

.
.

 Direct audit activities to production schedules.

 Establish priorities and ensure maximum usage of assigned resources.
 Evaluate and recommend alternative auditing procedures for continuous
improvement.
 Support production leads and operators for interpretation and methods
following set standards.
 Maintain working production component’s knowledge and associate next
tier operation or process.
 Conduct meetings regularly with inspection and audit team to help
consistency in teamwork.
 Involve in team driven actions to help improvements.
 Interpret and support quality policies and implement guidelines to ensure
compliance with quality standards and documents.
 Develop and maintain QA programs complementary to enterprise quality
system, corporate objectives and policies.
 Perform as ISO representative to head quality program.
 Guide organization personnel through new practices and certifications.
 Supervise and review corrective solutions and prevent action claims.
 Interpret quality control system to people within organization.
 Develop new methods to resolve problems occurring during QA activities.

Quality Inspector and FPI level II (Per NAS-410) 12/2008 - 05/2020

Maquilas Tetakawi (Paradigm Precision) - Guaymas, SON

 Review routers, procedures, specifications, drawings and other

instructions for completeness and instructions to perform
operation.
 Process part(s) in accordance with procedures and technical
instructions to evaluate for welding, machining, cold forming,
and/or casting discontinuities exceeding requirements specified.
 Set-up, operate, calibrate, and perform Process Control Checks
on NDT (Liquid Penetrant Test) equipment by following
established instructions and record results.
 Interpret, evaluate, and report evaluation results as required and
outlined.
 Fill out required logs and statistical data sheets as required 
Clean equipment and ensures it is working properly, and clean and
maintain work area as needed.
 Maintain required job skills and knowledge of requirements
(including procedures, specifications, etc.).

.
.

 Maintain work area, equipment, and all documents/records to be

audit ready at all times.
 Provide On-the-Job Training (OJT) to Level I NDT Inspectors,
trainees and fellow Level II NDT Inspectors.
 Etching processing (chemical process to clean surface that
interfere to FPI process).
 Assist the Level III in developing specific test techniques.

Quality Inspector and FPI level II (Per NAS-410) 09/2006 - 08/2008

Maquilas Tetakawi (Sargent) - Guaymas, SON

 Review routers, procedures, specifications, drawings and other

instructions for completeness and instructions to perform
operation.
 Process part(s) in accordance with procedures and technical
instructions to evaluate for welding, machining, cold forming,
and/or casting discontinuities exceeding requirements specified.
 Set-up, operate, calibrate, and perform Process Control Checks
on NDT (Liquid Penetrant Test) equipment by following
established instructions and record results.
 Interpret, evaluate, and report evaluation results as required and
outlined.
 Fill out required logs and statistical data sheets as required 
Clean equipment and ensures it is working properly, and clean and
maintain work area as needed.
 Maintain required job skills and knowledge of requirements
(including procedures, specifications, etc.)
 Maintain work area, equipment, and all documents/records to be
audit ready at all times.
 Provide On-the-Job Training (OJT) to Level I NDT Inspectors,
trainees and fellow Level II NDT Inspectors.
 Etching processing (chemical process to clean surface that
interfere to FPI process).
 Assist the Level III in developing specific test techniques.

Warehouse 10/2003 - 09/2006

Maquilas Tetakawi (Goodrich) - Guaymas, SON

 Assisting shipping and receiving by unloading trucks and checking in

products or materials.

.
.

 Preparing orders by processing requests, pulling orders, packing boxes

and transporting packages to the shipping area.
 Sorting and placing warehouse items, as directed by organizational
standards.
 Maintaining inventor controls.
 Ensuring clean and safe working environment.
 Preparing orders by processing requests, pulling orders, packing
boxes and transporting packages to the shipping area.

.
.