Scribd
Upload
50 views1 page

Typical Layers For Prototype Drawing - VTDI

The document lists 19 typical layers used in a 2D prototype drawing for a one bedroom flat, including layers for walls, doors, fixtures, text, windows, foundations, and more. It provides details on how to set up and customize layers in CAD software by naming layers, setting properties like line type, line weight, and color. The layers are identified by number, name, color, line type, and other properties to properly represent building elements in a CAD drawing.

Uploaded by

Matthew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views1 page

Typical Layers For Prototype Drawing - VTDI

The document lists 19 typical layers used in a 2D prototype drawing for a one bedroom flat, including layers for walls, doors, fixtures, text, windows, foundations, and more. It provides details on how to set up and customize layers in CAD software by naming layers, setting properties like line type, line weight, and color. The layers are identified by number, name, color, line type, and other properties to properly represent building elements in a CAD drawing.

Uploaded by

Matthew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Typical Layers for One Bedroom Flat 2D Prototype Drawing

No. Name Colour Index Linetype Lineweight


Colour
1 A-WALL-CONC White 7 Continuous 0.50 mm
2 A-DIMS 80 80 Continuous Default (0.15mm)
3 A-DOOR-TIMBER Magenta 6 Continuous Default
4 P-FIXTURES & APP Red 1 Continuous Default
5 A-TEXT Yellow 2 Continuous Default
6 A-WINS-GLAZ Cyan 4 Continuous Default
7 A-FDNWALL 21 21 Hidden Default
8 S-STIFFENER 40 40 Continuous Default
9 A-HATCH 33 33 Continuous Default
10 S-STEEL 240 240 Continuous 0.80 mm
11 A-ROOF 141 141 Continuous 0.40mm
12 A-ROOFWALL 60 60 Hidden Default
13 A-FLOOR White 7 Hidden Default
14 C-GROUND 41 41 Continuous 0.50mm
15 C-BOUNDRY 200 200 Border 0.40 mm
16 C-ROAD 134 134 Continuous 0.20 mm
17 C-ROADCL 9 9 Center 0.13 mm
18 S-FOOTING 111 111 Continuous 0.50 mm
19 L-LANDSCAPE Green 3 Continuous Default
Setting up Typical Layers for a drawing
1. Click on Home Tab and Layer Properties on Layer Panel in Versions 2009/19 or format on the menu
bar then click on LAYER to open Layer Properties Manager dialogue box in Versions 09 and below.
(Shortcut is LA)

To create a new layer click this To delete a layer, select


button or [Alt +N] then type layer the layer to be deleted
name and press enter key twice or then click this button.
comma once to start another layer.

To set a layer current click this button


or double click on the layer.

Loading Linetype To change linetype, click on


continuous for the layer (A-FDNWALL) and click
on LOAD, then select linetype (Hidden) from the
list in new dialogue box and press ok.
Choose the linetype loaded and press ok again.

Loading Lineweight To change lineweight, To change the colour of a layer click on


click on default for the layer (A-WALL-CONC) layer colour then choose colour from select
then select (0.50 mm) from list in lineweight colour dialogue index colour tab, type index
dialogue box and press ok. number or colour name in field and click ok
or press enter.

VTDI-SAT-CRE-TL-DB225-1.5 Computer Aided Drafting 1 0|Page

You might also like