Scribd
Upload
13 views

JS8 Controller Data Sheet

The JS8 is a rugged, versatile multi-axis joystick controller compatible with various grip styles. It offers spring return pressure per direction, friction hold, and multi detent positions. Programmable outputs include 0-10V proportional, ratiometric, or absolute configurations with two additional digital outputs per axis. Features include short circuit protection, EMC rating, and optional Hall effect or CAN bus electronics. It is designed for applications from -40°C to +70°C.

Uploaded by

التقني للكهرباء
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

JS8 Controller Data Sheet

The JS8 is a rugged, versatile multi-axis joystick controller compatible with various grip styles. It offers spring return pressure per direction, friction hold, and multi detent positions. Programmable outputs include 0-10V proportional, ratiometric, or absolute configurations with two additional digital outputs per axis. Features include short circuit protection, EMC rating, and optional Hall effect or CAN bus electronics. It is designed for applications from -40°C to +70°C.

Uploaded by

التقني للكهرباء
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

JS8

Dual Axis Contactless Controller

CUSTOM
SOLUTIONS
IN MOTION
The JS8 type multi-axis joystick controller is our most
rugged and versatile controller. The JS8 is compatible
with all rocker grips as well as the newer multigrip
control handles. The JS8 is also offered with an
underpanel protective “can” for applications that
do not allow for an enclosed box.

OPERATIONS:
• Individual spring return pressure per direction
• Friction Hold - all direction or 1 axis without spring return
• Multi detent positions
• Simultaneous, single, cross, Z and custom

FEATURES:
• Factory programmable output: proportional within
0-10v, ratiometric or absolute configuration
(Two additional digital outputs per axis – programmable
on/off position relative to handle travel) FROM DESIGN TO DELIVERY...
• Short circuit and reverse polarity protection provided TOTAL CONTROLLER SOLUTIONS.
on board
• Full CE rating for EMC (EMI, RFI and Magnetic Field) CONFIGURATION PREFIX:
protection • JS8 - Contacts and Potentiometers
• Simple and rugged mechanical controller design • HJS8 - Contactless Hall Effect
• Electronics Available: Hall Effect/Can Bus, remote VDM • HEJS8 Remote Board
• HCJS8 - CAN Bus, 1939 and CAN Open standard Available with
UFO electronic
DATA: module for
precise
electrohydraulic
• Power Supply: 7-30V valve control
• Digital Outputs: 2 per axis at 4amps total
• Handle Deflection: 60° (center to full: 30°)
• Handle Type: All knobs, RG, MG
• Operating temperature is -40°C to +70°C,
storage temperature is -40°C to +90°C
• Mechanical Life: › 6 million

10 Controls Drive | P.O. Box 894 | Shelton, CT 06484 | USA | Main: 203.929.8431 | www.oemcontrols.com
JS8
Dual Axis Contactless Controller
HANDLE POSSIBILITIES

KNOBS RG SERIES RG5, RG5X MG SERIES CUSTOM


Visit our free online
sketch pad to design
your perfect handle.
www.oemcontrols.com/
product-design-sketch-pad

Available with
UFO electronic
module for
precise
electrohydraulic
valve control

FROM DESIGN TO DELIVERY... TOTAL CONTROLLER SOLUTIONS.


WARNING:
It is the purchaser’s responsibility to determine the suitability of any OEM Controls product for an intended application, and to insure that it is installed and guarded in accordance with all
federal, state, local and private safety and health regulations, codes and standards.
Due to the unlimited variety of machines, vehicles and equipment on which our controls are used, and the numerous standards which are frequently the subject of varying interpretation, it is
impossible for OEM Controls personnel to provide expert advice regarding the suitability of a given controller for a specific application. The flexibility of our products allows us to offer
thousands of custom configurations. We can advise you of the various features that are available and you can examine models to see what meets your needs. We believe our customers’
engineering departments should be the qualified experts in their own product field. If the product will be used in a safety critical application, the customer must undertake appropriate testing
and evaluation to prevent injury to the ultimate user.
Should you have any questions or if any of the above warning is unclear, please contact OEM Controls at 10 Controls Drive, Shelton, CT 06484, FAX: 203.929.3867, TEL: 203.929.8431.

10 Controls Drive | P.O. Box 894 | Shelton, CT 06484 | USA | Main: 203.929.8431 | www.oemcontrols.com

You might also like