0% found this document useful (0 votes)
19 views168 pages

Ipc Ver210a

Uploaded by

Heli Fireblader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
19 views168 pages

Ipc Ver210a

Uploaded by

Heli Fireblader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 168

Table of Contents

SINGLE BOARD COMPUTER


21 ROBO-8777VG2A
PAGE 1-5 Table of Contents Intel® CoreTM 2 Duo processor based PICMG
6 About Portwell SBC with DDR2 SDRAM, VGA, Dual Gigabit
ROBO-8777VG2A
7 About SBC (Single Board Computers) Ethernet, Audio and USB
8 About ESB
22 ROBO-8773VG
9-13 SBC Reference Table Intel® CoreTM 2 Duo processor based PICMG SBC
FULL-SIZE SBC with DDR SDRAM, VGA, Gigabit Ethernet and USB
ROBO-8773VG

14 ROBO-8921VG2R 23 ROBO-8719VG2AR
Dual/Quad Core™ Xeon® processor based Intel® latest 45nm CoreTM 2 Duo or Celeron® M
PICMG 1.3 SHB with DDR2 ECC SDRAM, VGA processor based PICMG SBC with DDR2 SDRAM,
ROBO-8921VG2R
& Dual Gigabit Ethernet ROBO-8719VG2A VGA, Dual Gigabit Ethernet and Audio
15 ROBO-8914VG2AR
Intel® Core™ 2 Quad processor based 24 ROBO-8771VG2
PICMG 1.3 SHB with DDR3 SDRAM, VGA, Ultra Low Voltage Intel® Celeron M processor
Dual Gigabit Ethernet, Audio and USB based PICMG SBC with VGA and LAN
ROBO-8914VG2AR ROBO-8771VG

16 ROBO-8913VG2AR 25 ROBO-8718VG2A
Intel® Core™ 2 Quad processor based PICMG 1.3 Intel® Pentium® M or Celeron® M processor based
SHB with DDR2 SDRAM, VGA, Dual Gigabit PICMG SBC with DDR2 533 SDRAM, VGA, Dual
Ethernet, Audio and USB ROBO-8718VG2A Gigabit Ethernet and Audio
ROBO-8913VG2AR

17 ROBO-8912VG2AR 26 ROBO-8713VGA
Intel® Core™ 2 Duo processor based PICMG 1.3 Intel® Pentium® 4 or Celeron® D processor based
SHB with DDR2 SDRAM, VGA, Dual Gigabit PICMG SBC with DDR 400 SDRAM, AGP 8X VGA,
ROBO-8912VG2AR Ethernet, Audio and USB ROBO-8713VGA Gigabit Ethernet and Audio

18 ROBO-8911VG2A HALF-SIZE SBC


Intel® Pentium® M or Celeron® M processor based
PICMG 1.3 SHB with DDR2 SDRAM, VGA, 27 ROBO-6711VGA
Dual Gigabit Ethernet, Audio and USB mPGA479M Pentium® M/Celeron® M processor
ROBO-8911VG2A based half-sized PCI SBC with VGA, LCD,
ROBO-6711VGA GbE and Audio
19 ROBO-8910VG2A
Intel® Pentium® 4 or Celeron® D processor based
PICMG 1.3 SHB with DDR2 533 SDRAM, VGA, 28 ROBO-6730VLA
Dual Gigabit Ethernet and Audio Ultra Low Voltage Intel® Celeron® M processor
ROBO-8910VG2A based half-size PCI SBC with VGA, LCD, LAN
ROBO-6730VLA and Audio
20 ROBO-8779VG2AR
Dual Intel® Core™ 2 Quad processor based PICMG 1.0
SBC with DDR3 SDRAM, VGA, DVI, Dual Gigabit
Ethernet, Audio and USB
ROBO-8779VG2AR

INDUSTRIAL BACKPLANE

PAGE 29-30 PICMG 1.0 Backplane 33 PCI & ISA Backplane


31-32 PICMG 1.3 Backplane

INDUSTRIAL MAIN BOARD


PAGE 34-35 IMB Reference Table
36 RUBY-9911 39 RUBY-9717VGAR
Leading Intel® Core™ 2 Quad / Core™ 2 Duo Intel® Core™ 2 Quad processor based Micro-ATX
Processor based ATX motherboard with Dual Display, Industrial Mainboard with onboard DVI/VGA Dual-display,
RUBY-9911
Dual Gigabit Ethernet, Four SATA Ports, Four COM RUBY-9717VGAR DDR2 SDRAM, Gigabit Ethernet, Audio and USB
Ports, and Eight USB Ports
40 RUBY-9716VG2AR
37 RUBY-9719VG2AR Intel® Core™ 2 Quad processor based ATX Industrial
®
Intel Core™ 2 Duo/Core™ 2 Quad Processor based Mainboard with DDR2 SDRAM, VGA, Dual Gigabit
ATX Motherboard with DDR2, VGA, Dual Gigabit RUBY-9716VG2AR Ethernet, Audio and USB
RUBY-9719VG2AR Ethernet, Audio and USB
41 RUBY-9716VGAR
38 RUBY-9718VG2AR Intel® Core™ 2 Quad processor based ATX Industrial
Intel® Core™ 2 Quad processor based ATX Industrial
Mainboard with DDR2 SDRAM, VGA, Gigabit Ethernet,
Mainboard with onboard DVI/VGA Dual-Display, DDR2
RUBY-9716VGAR Audio and USB
RUBY-9718VG2AR SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB

01 Table of Contents
Table of Contents
INDUSTRIAL MAIN BOARD

42 RUBY-9715VG2AR 44 RUBY-7720VG2A
Intel® Core™ 2 Duo processor based ATX Industrial Intel® Pentium® M or Celeron® M processor based Micro-
Mainboard with DDR2 SDRAM, VGA, Dual Gigabit ATX Motherboard with DDR2 SDRAM, VGA, Dual Gigabit
RUBY-9715VG2AR Ethernet, Audio and USB RUBY-7720VG2A Ethernet, Audio and USB

43 RUBY-9713VG2AR
Intel® Core™ 2 Duo processor based Micro-ATX Industrial
Mainboard with DDR2 SO-DIMM, VGA, Dual Gigabit
RUBY-9713VG2AR Ethernet, Audio and USB

INDUSTRIAL CHASSIS

PAGE 45 About Chassis


46-47 Chassis Reference Table
48 RPC-500NC/L 63 AREMO-8164
19” 4U industrial rack-mount chassis 8-slot full-sized industrial node chassis
RPC-500NC (Shoe-box)
50 AREMO-4196 AREMO-8164

The Best Cost-Performance 19” 4U 65 AREMO-4184


Height Pentium® 4 Processor Based 19" 4U Height rack-mount chassis with
Rack-mount Computer dual AREMO-6182 node chassis
AREMO-4196
AREMO-4184
53 AREMO-2173P 67 AREMO-6182
19” 2U industrial rack-mount chassis for 6-slot full-size industrial node chassis
PICMG backplane (Shoe-box)
AREMO-2173P
AREMO-6182
55 AREMO-2173MX 69 PNC-5063
19” 2U industrial rack-mount chassis for 6-slot industrial node chassis for half-size
Micro-ATX or mini-ITX mother board PCI cards
AREMO-2173MX
PNC-5063
57 AREMO-3194 70 PRS-1174
19” 3U rack-mount chassis for ATX M/B 19" 1U Height rack-mount micro-ATX based
platform server with four drives
AREMO-3194 PRS-1174
59 PRC-4207 71 PRC-1194
19” 4U industrial rack-mount chassis for 19" 1U Height industrial rack-mount P4
server grade motherboard chassis
PRC-4207
PRC-1194
61 AREMO-6163 72 EZDRV-400
6-slot full-sized industrial node chassis 5.25" compact drive set with slim type
(Shoe-box) DVD-ROM, SD/CF card reader, 2 USB ports
EZDRV-400 and space for 2.5" HDD
AREMO-6163

3.5” & ECX FORM FACTOR


PAGE 73 ESB Reference Table

74 PEB-2731VLA 78 PEB-2738
3.5” Floppy-size, Ultra Low Voltage Intel® Celeron® M Intel® 45nm Ultra Low Power Menlow-XL processor
processor based Embedded Board with VGA, LCD, LAN and chipset based ECX embedded board with dual
and Audio PEB-2738 display, Audio, USB and SDIO
PEB-2731VLA

75 PEB-2130 79 PEB-2780VG2A
3.5” Embedded size, Intel® Pentium® M or Celeron® M 3.5” Embedded size, Based on Intel® 45nm Low
processor based on Embedded Board with DVI, LVDS, Power Pineview processor with DDR2 SODIMM,
PEB-2130 Dual Gigabit Ethernet, Audio and USB dual display by VGA/LVDS, Dual GbE, Audio,
PEB-2780VG2A COM and USB
76 PEB-2131VG2A
3.5” Embedded size, based on Intel® AtomTM N270
Processor with DDR2 SDRAM, Dual Display by VGA/ 80 PEB-2770VG2A
LVDS, Gigabit Ethernet, Four Power COM Ports and Compact In-Vehicle Application System
PEB-2131VGA
Audio 3.5” Embedded size, Based on Intel® 45nm Low
Power Pineview processor with DDR2 SODIMM,
77 PEB-2737VLA PEB-2770VG2A dual display by VGA/LVDS, Dual GbE, Audio,
Intel® 45nm Ultra Low Power AtomTM processor based COM and USB
ECX embedded board with VGA, LVDS, Gigabit
PEB-2737VLA Ethernet, Audio, USB and SDIO

Table of Contents 02
Table of Contents
NANO-ITX FORM FACTOR

81 NANO-8044 83 NANO-8045L
Intel® Ultra Low Power AtomTM Processor Intel® Ultra Low Power AtomTM Processor
based NANO-ITX Board with dual display, based NANO-ITX Board with dual display,
Gigabit Ethernet, Audio, USB and SDIO Gigabit Ethernet, Audio, USB and SATA
NANO-8044 NANO-8045L

82 NANO-8045 84 NANO-8050
Intel® Ultra Low Power Atom Processor based Leading Intel® latest ULV Mobile SFF 45nm
NANO-ITX Board with dual display, Gigabit CoreTM 2 Duo or Celeron® M processor based
NANO-8045
Ethernet, Audio, USB and SATA NANO-ITX with DDR2 SODIMM, Dual Displays,
NANO-8050 Gigabit Ethernet, Audio, USB

MINI-ITX FORM FACTOR

PAGE 85 About Mini-ITX


86-89 Mini-ITX Reference Table
90 WADE-8067 100 WADE-8047
Leading Intel® 45nm CoreTM 2 Duo processor On board Dual VGA Intel® Celeron® M/Pentium® M
or Celeron® M processor based Mini-ITX with processor Mini-ITX with DDR2 SDRAM, LVDS,
DDR3 SDRAM, HDMI, Dual Gigabit Ethernet, Four COM Ports and USB
WADE-8067 Audio and USB WADE-8047

91 WADE-8066 101 WADE-8180


Leading Intel® Core™ 2 Quad / Core™ 2 Duo
Leading Intel® CoreTM 2 Duo processor based
Processor based Mini-ITX embedded board with
Mini-ITX Board with DDR2 SDRAM, Dual Displays,
WADE-8066 Dual Display, WADE-8180 Dual Gigabit Ethernet,
Two GbE LAN ports, Audio and USB WADE-8180
SATA, COM and USB
92 WADE-8068
Leading Mobile Intel® CoreTM 2 Duo processor 102 WADE-8056
Mini-ITX with DDR2 SDRAM, Dual Displays, Two Leading Intel® CoreTM 2 Quad processor based
WADE-8068 GbE LAN ports, Four COM Ports, LPT and USB WADE-8056 Mini-ITX Board with Dual Displays and One GbE

93 WADE-8046 103 WADE-8556


Intel® CoreTM 2 Duo processor based Mini-ITX
Leading Intel® CoreTM 2 Quad processor based
Board with DDR2 SDRAM, VGA/ LVDS/ DVI,
Mini-ITX Board with Dual Displays and One GbE
WADE-8046
Gigabit Ethernet, Audio and USB
WADE-8556

94 WADE-8065 104 WADE-8656


Network Enriched Intel® CoreTM 2 Duo processor Leading Intel® CoreTM 2 Quad processor based
based Mini-ITX Board with Dual Displays, Three Mini-ITX Board with PCI-E expansion and Two
GbE LAN ports, Audio and USB GbE
WADE-8065 WADE-8656

95 WADE-8071 105 WADE-8055


Intel® Low Power AtomTM N270 1.6GHz Processor Network Enriched Intel® CoreTM 2 Duo processor
based Mini-ITX Board with DC12V input, dual display, based Mini-ITX Board with Dual Displays and Two
Gigabit Ethernet, Two SATA Ports, Two COM ports GbE
WADE-8055
WADE-8071 and Six USB Ports support thin client application

96 WADE-8070 106 WADE-2221A


Intel® Low Power AtomTM N270 1.6GHz Rugged and stylish Industrial Mini-ITX Bare Bone
Processor based Mini-ITX Board with dual WADE-2221A
System
display, Gigabit Ethernet, Two SATA Ports, Four
WADE-8070 COM Ports and Six USB Ports 107 WADE-1120A
The fan-less compact bare bone system with
97 WADE-8072 WADE-1120A Intel® Celeron® M Mini-ITX board
® TM
Intel Low Power Atom N270 1.6GHz
Processor based Mini-ITX Board with dual
display, Gigabit Ethernet, Two SATA Ports, Four 108 WADE-2231Q
WADE-8072
COM Ports and Six USB Ports Rugged and stylish Industrial Mini-ITX Bare Bone
WADE-2231Q Chassis with 180W Active PFC PSU
98 WADE-8170
Intell® AtomTM N270 Processor based Mini-ITX Board
109 ARTO-220-ITX
with Dual Display, Dual Gigabit Ethernet, Two SATA
1.5U Advanced Mini-ITX based chassis for Mini-
WADE-8170 Ports, Two COM ports and Eight USB Ports
ARTO-220-ITX ITX M/B application
99 WADE-8044
Ultra Low Voltage Intel® Celeron® M processor 110 WADE-1042
Mini-ITX with DDR2 SDRAM, Dual Display, Four 1U Height bare bone server with four drive bays
WADE-1042
COM Ports and USB for RAID and two expansion slots
WADE-8044

03 Table of Contents
Table of Contents
MINI-ITX FORM FACTOR

111 WADE-1181 113 WADE-2110


Compact Low Profile Mini-ITX Bare Bone Chassis Cubic Mini-ITX Bare Bone Chassis with Front
WADE-1181 with 1-slot PCI Expansion WADE-2110 Accessible Hard Drive Bay

112 WADE-1141 114 Riser Card Selection Guide


Compact Low Profile Mini-ITX Bare Bone Chassis
WADE-1141

MODULAR COMPUTING PLATFORMS

PAGE 115 About Modular


116 PCOM-B211VG 124 PQ7-M102XL
Intel® CoreTM Duo & Solo processor based QSeven, Intel® Embedded Menlow-XL Platform
Type II COM Express module with DDR2 SDRAM, with DDR2 SDRAM, LVDS Display, Gigabit
PCOM-B211VG VGA, Gigabit Ethernet, SATA 300 and USB PQ7-M102XL Ethernet, SDVO and SATA
117 PCOM-B212VG 125 PQ7-M103XL
Intel® CoreTM Duo or Celeron® M processor based Qseven, Based on Intel® eMenlow XL Platform with
Type II COM Express module with DDR2 SDRAM, DDR2 SDRAM,SATA LVDS Display,
PCOM-B212VG VGA, Gigabit Ethernet and USB PQ7-M103XL Gigabit Ethernet, SDVO and NANDrive
118 PCOM-B213VG 126 PQ7-M104G
Intel® GM45 platform based Type II COM Express Qseven, based on Intel® AtomTM Processor
module with DDR3 SDRAM, VGA, Gigabit Ethernet, with DDR2 SDRAM, LVDS Display, Gigabit
PCOM-B213VG SATA and USB PQ7-M104G Ethernet, SDVO and SATA
119 PCOM-B214VG 127 PQ7-C100XL
Intel® AtomTM based Type II COM Express module 3.5” ESB Form Factor Carrier Board For Qseven
with DDR2 SDRAM, VGA, Gigabit Ethernet, SATA Module
PCOM-B214VG and USB PQ7-C100XL

120 PCOM-B215VG 128 PQ7-C200


Intel® AtomTM based Type II micro-COM Express Mini-ITX Form Factor Carrier Board for QSeven
module with DDR2 SDRAM, VGA, Gigabit Module with Dual Displays and Two GbE
PCOM-B215VG Ethernet, SATA, USB and NAND Flash PQ7-C200
129 PEM-E200VLA
121 PCOM-B216VG Intel® AtomTM based Type ETX module with
Intel® Arrandale processor based Type II COM DDR2 SDRAM, VGA, Fast Ethernet, SATA and
Express module with DDR3 SDRAM, VGA PEM-E200VLA
USB
PCOM-B216VG Gigabit Ethernet 3. 0 GT/s SATA and USB
130 PEM-C200
122 PCOM-C210 Micro-ATX Form Factor Evaluation Carrier
ATX Form Factor Evaluation Carrier Board for Board for ETX Module
COM Express Type II Module PEM-C200
PCOM-C210
123 PQ7-M101G
QSeven, based on Intel® AtomTM Processor with
DDR2 SDRAM, LVDS Display, Gigabit Ethernet,
SDVO and SATA
PQ7-M101G

EMBEDDED COMPUTING SYSTEM


PAGE 131 About WEBS
132 Quality Assurance
134 Brick concept
135 WEBS Reference Table

137 WEBS-3330 141 WEBS-3331


Embedded Fan-less system with Intel® AtomTM Embedded slim fan-less system with Intel® AtomTM
WEBS-3330 N270 Processor in MINI-ITX form factor WEBS-3331 N270 based MINI-ITX board

138 WEBS-2120 142 WEBS-4330


Embedded compact fan-less system with Intel® Embedded rugged compact fan-less system with
WEBS-2120 AtomTM Z510/Z530 based NANO-ITX board WEBS-4330 Intel® AtomTM N270 based MINI-ITX board

139 WEBS-2121 143 WEBS-1310


Embedded compact fan-less system with Intel® Embedded rugged fan-less system with Intel®
AtomTM Z510/Z530 based NANO-ITX board WEBS-1310 Atom™ Z510PT/Z520PT based 3.5” ECX board
WEBS-2121

140 WEBS-1320 144 WEBS-1330


Embedded Fan-less system with Intel® AtomTM Embedded rugged fan-less system with Intel®
WEBS-1320 Processor in 3.5" ECX form factor WEBS-1330 Atom™ N270 based 3.5” ECX board

Table of Contents 04
Table of Contents
EMBEDDED COMPUTING SYSTEM
145 WEBS-1340 147 WEBS Mounting Solution
Embedded rugged fan-less system with Intel®
WEBS-1340 Atom™ N450/D510 based 3.5” ECX board

146 WEBS-3332
Embedded rugged slim fan-less system with
WEBS-3332 Intel® Atom™ N270 based MINI-ITX board

INDUSTRIAL PSU

PAGE 148 PSU Reference Table

149 GADIWA-P0901 158 ORION-D3002DDP


120W DC/DC Converter (12V/input, ATX/ 300W -38VDC to -72VDC input DC/DC
GADIWA-P0901 output), Board type ORION-D3002DDP mini-redundant ATX power supply

150 GADIWA-R9271 159 ORION-D3502P


9V~27V/wide-input, 12V/output Regulator, 350W ATX mini-redundant with active
Board Type ORION-D3502P PFC power supply
GADIWA-R9271

151 GADIWA-3160 159 ORION-D4602P


128W DC/DC 12V~36V/wide-input, ATX/ 460W+460W mini-redundant switching
GADIWA-3160 output, Board Type Converter ORION-D4602P power supply with active PFC

152 GADIWA-3161 160 MPM-842P


128W DC/DC 9V~29V/wide-input, ATX/ 400W PS/2 ATX power supply
GADIWA-3161 output, Board Type Converter MPM-842P with active PFC

153 GADIWA-N2360 160 MPM-815H


360W Mini-Redundant PSU, 18~30VDC 150W 1U ATX power
Wide-Rang/input, ATX/output MPI-815P supply with active PFC
GADIWA-N2360
161 MPI-810H
154 ORION-A2501 120W universal input open-frame
250W 1U ATX power supply with power supply
MPI-810H
ORION-A2501
active PFC
161 MPD-810H
154 ORION-A1501 120W universal input open-frame,
150W 1U ATX power supply with DC to DC power supply
MPD-810H
ORION-A1501 active PFC
162 MPE-008A-P
80W universal input open-frame
155 ORION-A1501P power supply
150W Flex form factor power MPE-008A-P

ORION-A1501P
supply with active PFC 162 MPI-806H
60W universal input open-frame
155 ORION-A1801P MPI-806H
power supply
180W Flex form factor power
ORION-A1801P supply with active PFC 163 Adapter
APH-3019-40W
156 ORION-B3501P APH-3019-40W
350W 2U ATX power supply 163 Adapter
ORION-B3501P with active PFC APH-3020-60W
APH-3020-60W
156 ORION-D3501P 163 Adapter
350W ATX power supply with APH-3023-96W
ORION-D3501P active PFC
APH-3023-96W
163 Adapter
157 ORION-D4601P APH-3011-150W
460W PS/2 ATX power supply
with active PFC 164 Configuration Matrix
ORION-D4601P APH-3011-150W

157 ORION-D5501P 165 Accessory


550W PS/2 ATX power supply
ORION-D5501P
with active PFC 166 EZCool

158 ORION-300DX/24/48
300W -48V/24V DC input
DC/DC PS/2 ATX power supply
ORION-300DX/24/48

05 Table of Contents
About Portwell
Who is Portwell?
Portwell, Inc. was founded in Taiwan in 1993 and entered the Industrial PC market in 1995 by
developing single-board computers. Today, our continued development of leading-edge products has
resulted in strong growth in market share and revenue, a firm place on the Taipei stock exchange
(TAISDAQ), and has established Portwell as a major worldwide supplier of specialty computing
application platforms and services. Portwell, Inc. is not only a member of the select group of Intel®
Applied Computing Platform Providers (IACPP), but also an associate member of Intel® Embedded and
Communications Alliance (ECA), as well as Advanced Telecom Computing Architecture (ATCA) and an
executive member of PCI Industrial Computer Manufacturing group (PICMG).
Portwell, Inc. has worldwide offices in the U.S.A., Taiwan, Japan, China, Netherland, United Kingdom,
and India.

Why Partner with Portwell?


Whether you are working on a computer board or turnkey system, Portwell is the perfect partner to help
you deliver your products to market on time as well as maintain longevity of product life cycle. With 16
years experience in the design and manufacture of specialty computer boards and systems, Portwell not
only provides a one-stop resource for off-the-shelf products, but also supplies custom-built solutions and a
global logistics service to suit your needs.
Portwell OEM and ODM solutions satisfy a host of top-tier companies in the retail automation, medical equipment, industrial automation, Infotainment,
communication, and network security markets. Encouraged by our flexible business support, manufacturing excellence, and compliance with high
quality and environmental standards such as ISO 9001/14000 and RoHS, customers have taken advantage of our dedicated and sophisticated
engineering resource to satisfy their requirements for the design, manufacturing and logistics of application-specific computer boards, unique computer
chassis, and specific computer system configurations. Whether you're working on a Medical Single Board Computer or Internet Security Applicance,
Portwell is the perfect partner to help you deliver your products to market on time and stay one step ahead of the competition.

Why Portwell Platforms and Services?


 Complete Product Portfolio
Select from our full range of both off-the-shelf and versatile custom solutions to scale your products. Portwell provides not only board-level
products, but also peripheral-level and complete system solutions.
 Implement Latest Intel Technology
Partnering with Intel since 1999, and with streamline access to the latest Intel technologies and roadmap, Portwell delivers cutting-edge
solutions not only to meet and exceed the demand for the technologies, but also the needs of the long product life cycle.
 Faster Time-to-Market
Portwell experienced engineers, complete product solutions, global operation and flexible business service help you meet the time-to-market
requirement and reduce your new product introduction cycle, as well as costs of conducting business.
 Leading Edge Innovator
Portwell is committed to product and solution innovation, and not only has completed a variety of proof-of-concept designs with Intel, but is
also a leader in offering the latest technologies to the market.
 Committed to Customer Satisfaction
Portwell operates a high standard process in determined pursuit of our commitment to continuously improve our products and services to
satisfy and exceed our customers' needs.

What is Portwell Value Proposition?


Design, Develop, and Deliver
 Design, develop and deliver to meet customer requirements, such as production, reliability, stability, cost-effectiveness, and longevity of product.
 Experienced and sophisticated engineering capability includes electronic, mechanical, firmware and system integration expertise.

Portwell Manufacturing Excellence


 Supply chain and component inventory management with automation.
 In-house SMT lines and PCB assembly and functional testing.
 In-house system integration and testing.
 ISO 14001 and ISO 9001 certified manufacturing facilities (89,000 sq. ft. in Taipei).
 Flexible production capability.

Portwell Global Presence


 One point of contact, global support.
 Sales and technical support teams are available through Portwell worldwide offices in the U.S.A., Taiwan, Japan, China, Netherland,
United Kingdom, and India.
 Customer-centric service and support.

About Portwell 06
About SBC (Single Board Computers)

HIGH QUALITY

Portwell is a leading designer


and manufacturer of
PICMG slot boards.

Portwell, Inc. is a leading designer and manufacturer of PICMG slot boards. Featuring more expansion slots for add-in cards,
high integration with versatile backplanes, and ease of upgrading and maintenance, these boards are well suited to critical
applied computing applications.

As an Associate (Silver) Member of Intel® Embedded and Communications Alliance, Portwell is


guaranteed at least five-year availability of the Intel® components contained in the Embedded
Intel® Architecture. This helps equipment manufacturers to secure the longevity of products
that have gone through long periods of validation.

All the components used in the Portwell SBC are specifically selected to meet the environmental requirements from even the most
critical industrial applications. All the boards have to pass strict and complete reliability and compatibility tests in both design and
production phases.

®
In addition to our full-range PICMG 1.0 SBC, Portwell also provides a total solution of PICMG 1.2 system, integrating dual Xeon
processor based SHB, up to four independent PCI/PCI-X buses, single/redundant power supply and industrial chassis. The
new PICMG 1.2 standard is characterized by the replacement of the ISA bus with PCI-X bus. Because the PCI-X bandwidth
is eight times of a 32-bit / 33MHz PCI bus, many high throughput applications, such as image processing, data storage, and
communication appliance, have already adopted this bus architecture. Server board is the application that most utilizes the PCI-
X bus. Portwell also provides slot board features in response to growing needs, and to better fit these critical applications.

In pursuit of our commitment to excellence, Portwell operates an ISO 14001 and ISO 9001 qualified system (from initial
design, through manufacturing to delivery) to provide high performance industrial computing platforms with satisfying quality.
Furthermore, we consistently seek opportunities to collaborate with customers in every vertical market in order to develop the
right product in their domains. Through this cooperation, customers can get the core engine or system at the same pace as their
product planning.

Please note:
Specifications are subject to change without notice.
* Other trademarks, logo, brands and company names are the property of their respective owners.
*

07 About SBC
About ESB

USE ESB IN YOUR NEXT PROJECT

Portwell ESB (Embedded System Board) product line targets the Interactive
client market with boards based on 5.25" and Embedded ATX/Micro ATX
form factors. Interactive client applications include ATM (Automated Teller
Machines), Kiosk, Digital Signage, POD, POS (Point-Of-Sale), Lottery, and
Vending and Gaming Machines.

HIGH SPEED PROCESSOR


All these interactive clients are even more powerful today in order to fulfill the current needs for
convenience and entertainment. Richer functions demand the higher speed and hyper-threading/dual
core processors we provide for running different applications concurrently.

ETHERNET
Highly personalized and customized service is gaining popularity and contributes to the huge customer
database growing behind the end nodes. To access this database, a secure and fast communication
channel is required. Nowadays, Ethernet is the most popular communication interface in the world. It
greatly minimizes construction cost and TTM (Time-To-Market) of the node terminals.

USB
USB (Universal Serial Bus) makes adding peripheral devices extremely easy without worrying about
add-in cards or IRQs. With the introduction of USB 2.0, the raw data transmission rate is increased
from 12 Mbps of USB 1.1 to 480 Mbps. Therefore, more and more peripherals adopt this interface.
Since more USB ports are either embedded in the chipset or can be added by the USB hub, the
system capability is expanded without any problems.

DUAL DISPLAY
Most of the Portwell ESB offers dual display support to display identical or different contents at the
same time. The secondary display provides additional information to users when they access or pass
information to the interactive clients. It also allows users to have a wider display by extending the
working space on dual displays.

About ESB 08
SBC Reference Table

FULL-SIZE SINGLE BOARD COMPUTER

MODEL ROBO-8921VG2R ROBO-8914VG2AR ROBO-8913VG2AR


CPU LGA771 Dual/Quad CoreTM Xeon®
LGA775 CoreTM 2 Quad/CoreTM 2 LGA775 CoreTM 2 Quad/CoreTM 2
Duo/Celeron® Duo/Celeron®

System Bus
1333/1066MHz 1333/1066/800MHz 1333/1066/800MHz
Frequency

Max Memory 4 DIMM/32GB (DDR2) 4 DIMM/8GB (DDR3) 2 DIMM/4GB (DDR2)

ECC YES NO NO

BIOS AMI AMI AMI

Chipset Intel ® 5100, ICH9R Intel ® Q45, ICH10DO Intel ® Q35, ICH9DO

SSD N/A N/A N/A

VGA / Panel XGI Z11 Intel ® Q45 GMCH Intel ® Q35 GMCH

HDD Channel 6 SATA 300 6 SATA 300 6 SATA 300

FDD Drives 1 1 2

LAN Intel 82575x1


® Intel 82574Lx1, 82567LMx1
® Intel® 82573Lx1, 82566DMx1

Expansion Interface Two PCI-E x8, One PCI-E x4, Four PCI-E x1, One PCI-E x16, Four PCI-E x1, One PCI-E x16,
Four PCI Four PCI Four PCI

USB Port 10 12 12

ATX Control YES YES YES

On-Board I/O W83627DHG W83627HG W83627HG

Serial Port 2 2 2

Parallel Port 1 1 1

PS/2 K/B Header Header Header

PS/2 Mouse Header Header Header

WDT YES YES YES

H/W Monitoring YES YES YES

IrDA N/A N/A YES

Audio N/A YES YES

ISA NO NO NO

338.5 mm x 126.39 mm 338.5 mm x 126.39 mm 338.5 mm x 126.39 mm


Dimension (L) x (W)
13.33" x 4.98" 13.33” x 4.98” 13.33" x 4.98"

Page 14 15 16

“ “ Over-clocking
*

09 SBC Reference Table


SBC Reference Table
FULL-SIZE SINGLE BOARD COMPUTER

MODEL ROBO-8912VG2AR ROBO-8911VG2A ROBO-8910VG2A


CPU LGA775 CoreTM 2 Duo/Pentium® D/
mPGA479M Pentium® M/Celeron® M mPGA478 Pentium® 4/Celeron® D
Pentium® 4/ Celeron® D

System Bus
1066/800/533MHz 533/400MHz 800/533MHz
Frequency

Max Memory 2 DIMM/4GB (DDR2) 2 SODIMM/2GB (DDR2) 2 DIMM/2GB (DDR2)

ECC NO NO NO

BIOS Award Award Award

Chipset Intel ® Q965, ICH8DO Intel ® 915GME, ICH6 Intel ® 915GV, ICH6

SSD N/A CF Max. 1GB CF Max. 1GB

VGA / Panel Intel® Q965 GMCH Intel® 915GM GMCH/YES Intel® 915GV GMCH/NO

HDD Channel 6 SATA 300 1 EIDE Ultra DMA 1 EIDE Ultra DMA
100/66/33 & 4 SATA 150 100/66/33 & 4 SATA 150

FDD Drives 2 2 2

LAN Intel® 82573Lx1, 82566DMx1 Marvell 88E8001x2 Marvell 88E8001x2

Expansion Interface Four PCI-E x1, One PCI-E x16, One PCI-E x16, Four PCI-E x1, Four PCI Express x1, Four PCI
Four PCI Four PCI

USB Port 10 8 8

ATX Control YES YES YES

On-Board I/O W83627EHG W83627THF W83627THF

Serial Port 2 2 2

Parallel Port 1 1 1

PS/2 K/B Header Header Header

PS/2 Mouse Header Header Header

WDT YES YES YES

H/W Montioring YES YES YES

IrDA N/A YES YES

Audio YES YES YES

ISA NO NO NO

338.5 mm x 126.39 mm 338.5 mm x 122 mm 338.5 mm x 122 mm


Dimension (L) x (W)
13.33" x 4.98" 13.33" x 4.8" 13.33" x 4.8"

Page 17 18 19

“ “ Over-clocking
*

SBC Reference Table 10


SBC Reference Table

FULL-SIZE SINGLE BOARD COMPUTER

MODEL ROBO-8779VG2AR ROBO-8777VG2A ROBO-8773VG


CPU LGA775 CoreTM 2 Quad/CoreTM 2 LGA775 CoreTM 2 Duo/Pentium® D/ LGA775 CoreTM 2 Duo/Pentium® D/
Duo/Celeron® Pentium® 4/ Celeron® D Pentium® 4/ Celeron® D

System Bus
1333/1066/800MHz 1066/800/533MHz 1066* (Optional)/800/533MHz
Frequency

Max Memory 2 DIMM/4GB (DDR3) 2 DIMM/4GB (DDR2) 2 DIMM/2GB (DDR)

ECC NO NO NO

BIOS AMI Award Award

Chipset Intel ® G41, ICH7R Intel® Q965, ICH8 Intel® 865G, ICH5

SSD Type II CF N/A N/A

VGA / Panel Intel® G41 GMCH Intel® Q965GMCH/NO Intel® 865GMCH/NO

HDD Channel 4 SATA 300 4 EIDE Ultra DMA 100/66/33 &


4 SATA 300
2 SATA 150

FDD Drives 1 2 2

LAN Intel® 82574Lx2 Realtek RTL 8111B x2 Realtek RTL 8110SC x1

Expansion Interface N/A N/A N/A

USB Port 8 6 8

ATX Control YES YES YES

On-Board I/O W83627THG W83627DHG W83627THG

Serial Port 2 2 2

Parallel Port 1 1 1

PS/2 K/B Header Header YES

PS/2 Mouse Header Header YES

WDT YES YES YES

H/W Montioring YES YES YES

IrDA NO NO YES

Audio YES YES NO

ISA YES YES YES

338.5 mm x 122 mm 338.5 mm x 122 mm 338.5 mm x 122 mm


Dimension (L) x (W)
13.33" x 4.8" 13.33” x 4.8” 13.33” x 4.8”

Page 20 21 22

“ “ Over-clocking
*

11 SBC Reference Table


SBC Reference Table

FULL-SIZE SINGLE BOARD COMPUTER

MODEL ROBO-8719VG2AR ROBO-8771VG2 ROBO-8718VG2A


CPU 45nm Mobile CoreTM 2 Quad/CoreTM 2
Duo/Celeron® M ULV Celeron® M 600MHz mFCPGA Pentium® M / Celeron® M

System Bus
1066/800/667MHz 400MHz 533/400MHz
Frequency

Max Memory 2 DIMM/4GB (DDR2) 1 DIMM/1GB (DDR) 2 DIMM/2GB (DDR2)

ECC NO NO NO

BIOS AMI Award Award

Chipset Intel® GM45, ICH9ME Intel® 852GM, ICH4 Intel® 915GME, ICH6

SSD Type II CF N/A CF Max. 1GB

VGA / Panel Intel GM45GMCH/YES


®
Intel 852GM GMCH/NO
®
Intel® 915GM/YES

HDD Channel 2 EIDE Ultra DMA 1 EIDE Ultra DMA 100/66/33 & 4
3 SATA 300
100/66/33 SATA 150

FDD Drives 1 2 2

LAN Intel® 82567LM, 82574L Realtek RTL8110SC x2 Marvell 88E8053x2

Expansion Interface N/A N/A N/A

USB Port 6 12 4

ATX Control YES YES YES

On-Board I/O W83627DHG W83627THG W83627THF

Serial Port 2 2 2

Parallel Port 1 1 1

PS/2 K/B Header Header Header

PS/2 Mouse Header Header Header

WDT YES YES YES

H/W Montioring YES YES YES

IrDA NO YES YES

Audio YES N/A YES

ISA YES YES YES

338.5 mm x 122 mm 338.5 mm x 122 mm 338.5 mm x 122 mm


Dimension (L) x (W)
13.33” x 4.8” 13.33" x 4.8" 13.33” x 4.8”

Page 23 24 25

“ “ Over-clocking
*

SBC Reference Table 12


SBC Reference Table
HALF-SIZE SINGLE BOARD COMPUTER

MODEL ROBO-8713VGA ROBO-6711VGA ROBO-6730VLA


CPU mPGA478 Pentium®4/
mPGA478 Pentium® M/Celeron®M ULV Celeron® M 600MHz
Celeron® D

System Bus
800/533/400MHz 533/400MHz 400MHz
Frequency

Max Memory 2 DIMM/2GB (DDR) 1 SODIMM/1GB (DDR) 1 SODIMM/1GB (DDR)

ECC NO NO NO

BIOS Award Award Award

Chipset Intel® 865G, ICH5 Intel® 852GME, ICH4 Intel® 852GM, ICH4

SSD CF Max. 1GB CF Max. 1GB CF Max. 1GB

VGA / Panel Intel® 865GV GMCH/NO Intel® 852GM GMCH/YES Intel® 852GM GMCH/YES

2 EIDE Ultra DMA 100/66/33 & 2 2 EIDE Ultra DMA 2 EIDE Ultra DMA
HDD Channel
SATA 150 100/66/33 100/66/33

FDD Drives 2 2 2

LAN Intel® 82547x1 Intel® 82541x1 Intel® 82562x1

Expansion Interface Proprietary PCI connector NO NO

USB Port 4 4 4

ATX Control YES YES NO

On-Board I/O W83627HF W83627HF W83627HF

Serial Port 2 2 2

Parallel Port 1 1 1

PS/2 K/B YES YES YES

PS/2 Mouse YES YES YES

WDT YES YES YES

H/W Montioring YES YES YES

IrDA YES YES YES

Audio YES YES YES

ISA YES YES YES

338.5 mm x 122 mm 185 x 122 mm 185 x 122 mm


Dimension (L) x (W)
13.33" x 4.8" 7.3" x 4.8" 7.3" x 4.8"

Page 26 27 28

“ “ Over-clocking
*

13 SBC Reference Table


Dual/Quad CoreTM Xeon® processor based

ROBO-8921VG2R PICMG 1.3 SHB with DDR2 ECC SDRAM,


VGA & Dual Gigabit Ethernet

Four 240-pin DDR2 DIMM sockets Parallel port


Four USB ports

Dual COM ports


FDD port
Dual USB ports
Intel® Dual/Quad Core
XeonTM processor
Dual GbE ports
Intel® 82575 Gigabit Ethernet
XGI Z11
VGA port

Intel® ICH9R
Intel® 5100
TMDS port
(optional) 2nd VGA port
(optional)

GENERAL
FEATURES Processor CPU & Package: Dual/Quad CoreTM Intel® Xeon® processor
(single or dual processor) in LGA-771 package
 ROBO-8921 offers flexible 1333/1066 MHz FSB: 1333/1066MHz
selection of Intel® Dual/Quad CoreTM Xeon®
Chipset/Core Logic Intel® 5100 and ICH9R
processors with LGA771 package
System Memory - Up to 32GB DDR2 533/667 SDRAM on four 240-pin DIMM sockets
 Flexible design of dual PCI Express x8 could - Support ECC, registered
be aggregated as one PCI Express x16 for BIOS AMI BIOS
Graphic card
Storage Devices EIDE: N/A
 Rich & powerful I/O expansion covers dual SATA: Support Six SATA 300 drives (dual SATA ports via Backplane)
PCI Express x8, one PCI Express x4 and (RAID 0, 1, 5, 10)
four PCI devices Solid State Disk N/A

 Up to 32GB, ECC registered memory Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
assured the computer reliability and Expansion Interface - One PCI Express x8
benefited the data swapping process - Three PCI Express x4
- Four PCI devices
 Relative high performance graphic engine,
Hardware Monitoring System monitor (fan, temperature, voltage)
XGI Z11 provides solid 2D for server grade
market Power Requirement Typical: [email protected]; [email protected]

Dimension Dimension : 338.6(L) x 126.39(W) mm; 13.33"(L) x 4.98" (W)


 Dual PCI Express x4 based Gigabit Ethernet PCB: 12-layer
supports IPv4, IPv6 offloading, VLAN,
Wake-On-LAN functions Environment Operating Temperature: 0 to 60oC (for 80W CPU limitation)
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 106,427 hrs

I/O
MIO Two serial (RS232 x1, selectable RS232/485 x1), one parallel, one FDD
channel

IrDA N/A
ORDERING GUIDE
Ethernet PCI Express x4 interface based Intel® 82575 dual Gigabit Ethernet controller
Standard ROBO-8921VG2R N/A
Audio
Dual Xeon® LV processor based PICMG 1.3
SHB with VGA and Dual Gigabit Ethernet USB Ten USB 2.0 ports (Four through backplane)
(CPU Cooler included) Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse

Optional PS/2 Keyboard/Mouse with Bracket


PS/2 keyboard/mouse connectors on bracket
DISPLAY
Graphic Controller XGI Z11

Graphic Memory 32MB DDR2 Memory

Display Interface Support CRT and optional second CRT or DVI-D display interfaces

SBC-ROBO-8921VG2R 14
Intel® Core™ 2 Quad processor based

ROBO-8914VG2AR PICMG 1.3 SHB with DDR3 SDRAM, VGA,


Dual Gigabit Ethernet, Audio and USB

COM2 (RS232/422/485 selectable)


Four 240 pin DDR3 DIMM sockets
Parallel port
+12V Power connector Four SATA 300 ports FDD port

COM1 (RS-232)

PS/2 keyboard & mouse


Dual USB ports

Dual GbE ports

VGA port

LGA775 socket Intel® Q45 Six USB Ports


Intel® ICH10DO

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, Core 2 Duo, Celeron processor in
 Support Intel® CoreTM 2 Duo and Core 2 Quad LGA-775 package
processors and offers flexible 1333/1066/800 FSB: 1333/1066/800MHz
MHz FSB selection Chipset/Core Logic Intel® Q45 and ICH10DO

 Delivers up to 8GB maximum DDR3 1066/800 System Memory Up to 8GB DDR3 1066/800 SDRAM on four 240-pin DIMM socket
on four long DIMM sockets BIOS AMI BIOS

Storage Devices EIDE: N/A


 Support Intel® Q45 integrated GMA 4500 SATA: Support six SATA 300 drives (dual SATA ports via backplane)
graphic engine delivers optimized 3D graphics (RAID 0,1,5,10)
performance N/A
Solid State Disk
 Support iAMT 5.0 and iTPM function Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.

Expansion Interface N/A


 High speed dual Gigabit Ethernet based on
PCI Express x1, high bandwidth I/O interface Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement N/A


 Rich I/O connections such as FDD, two
Dimension Dimension: 338.5(L) x 126.39(W) mm / 13.33”(L) x 4.98” (W)
Gigabit Ethernet, serial ports, parallel port, PCB: 8-layer
USB 2.0
Environment Operating Temperature: 0 to 55oC
Storage Temperature: -20 to 80oC
 Four on-board SATA ports support RAID
Relative Humidity: 5% to 90%, non-condensing
0,1,5,10
MTBF N/A

I/O
ORDERING GUIDE MIO Two serial (RS-232x1, selectable RS-232/422/485 x1), one parallel and one
FDD channel
Standard ROBO-8914VG2AR
IrDA N/A
PICMG 1.3(PCI-E+PCI).LGA775.Core 2
Quad.SHB.w/VGA/Dual GbE/Audio Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
- PCI Express x1 interface based Gigabit Ethernet
Optional PA-M1AU - Dual RJ-45 connector with two LED indicators
Multimedia kit with audio and USB ports
PS/2 Keyboard/Mouse Cable with Bracket Audio HDA interface, 5.1-channel Audio (Realtek ALC 662)
PS/2 keyboard/mouse connectors on bracket USB Twelve USB 2.0 ports (Four USB ports via backplane)
USB cable with bracket
Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse
Two USB ports with bracket
Low profile LGA775 Cooler
High efficiency slim cooler increases reliability DISPLAY
of system
Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator (GMA) 4500
- Provided improved 3D multimedia capabilities including Microsoft DirectX 10,
* Specifications are subject to change without notice. Shader Model 4.0, MPEG-2 and OpenGL 2.1
* Celeron®, Pentium® III, Pentium® 4 and XeonTM are registered Intel® Dynamic Video Memory Technology (DVMT) 5.0 shares system memory
trademarks of Intel® Corporation
Graphic Memory
up to1GB
* Other trademarks, logo, brands and company names are the
property of their respective owners Display Interface Analog CRT: up to 2048 x 1536 @ 75Hz

15 SBC-ROBO--8914VG2AR
Intel® Core™ 2 Quad processor based

ROBO-8913VG2AR PICMG 1.3 SHB with DDR2 SDRAM, VGA,


Dual Gigabit Ethernet, Audio and USB

COM2 (RS232/422/485 selectable)


FDD port
Dual 240-pin DDR2 DIMM sockets
COM1

+12V power connector Parallel port


PS/2 keyboard & mouse
Six USB ports
Dual USB ports

Dual GbE ports

VGA port

Intel® Q35 Four SATA 300 ports


LGA 775 socket ®
Intel ICH9DO

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, CoreTM 2 Duo, Celeron ® processor
 Support Intel® CoreTM 2 Quad processor up to in the LGA-775 package
FSB 1333MHz FSB: 1333/1066/800MHz

Chipset/Core Logic Intel® Q35 & ICH9DO


 Low profile processor improves stability and
reliability of whole system System Memory Up to 4GB DDR2 800/667 SDRAM on dual 240-pin DIMM sockets

 Support eSATA that can communicate with BIOS AMI BIOS


multiple drives via port multiplier Storage Devices EIDE: N/A
SATA: Support six SATA 300 drives (dual SATA ports via backplane)
 Lockable cable-latched notches of SATA connector (RAID 0, 1, 5, 10)
secure connection in vibration condition
Solid State Disk N/A
 Embedded Intel® Active Management Technology Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
(AMT) remotely discovers, heals and protects
networked computing assets using third-party Expansion Interface Four PCI Express x1, one PCI Express x16 and four PCI
management and security applications Hardware Monitoring System monitor (fan, temperature, voltage)

 System noise and heat are reduced through more Power Requirement Typical: [email protected]; [email protected]
intelligent fan speed control algorithms by Dimension : 338.5(L) x 126.39(W) mm; 13.33"(L) x 4.98" (W)
Dimension
integrated Intel® Quiet System Technology PCB: 8-layer

 Flexiblie design of four external PCI Express x1 Environment Operating Temperature: 0 to 60oC
could aggregate as one PCI Express x4 for storage Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
device thru backplane
MTBF 115,592 hrs

I/O
MIO Two serial (RS232 x1, selectable RS232/422/485 x1), one parallel and one
FDD channel

IrDA IrDA 1.0

Ethernet - Dual 10BAST-T/100BAST-TX/1000BAST-T Ethernet


- PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connector with two LED indicators
ORDERING GUIDE
Audio HDA interface, 2-channel Audio (Realtek ALC 262)
Standard ROBO-8913VG2AR Twelve USB 2.0 ports (Four USB ports via backplane)
USB
LGA-775 Core 2 Quad processor based
PICMG 1.3 SHB with DDR2 SDRAM, VGA, Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse
Dual Gigabit Ethernet, Audio and USB

Optional PA-M1AU
Multimedia kit with audio and USB ports
DISPLAY
PS/2 Keyboard/Mouse Cable with Bracket Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator 3100
- Provides improved 3D multimedia capabilities including DirectX 9, Shader
PS/2 keyboard/mouse connectors on bracket
Model 2.0, OpenGL 1.4, MPEG-2 hardware acceleration
Low Profile LGA775 Cooler
High efficiency slim cooler that increases Graphic Memory Intel® Dynamic Video Memory Technology (DVMT) 4.0 shares system memory
reliability of system up to 256MB

Display Interface Support CRT interface up to QXGA 75Hz (2048x1536)

SBC-ROBO-8913VG2AR 16
Intel® Core™ 2 Duo processor based

ROBO-8912VG2AR PICMG 1.3 SHB with DDR2 SDRAM, VGA,


Dual Gigabit Ethernet, Audio and USB

COM2 (RS232/422/485 selectable)

Dual 240-pin DDR2 DIMM sockets Four SATA 300 ports


COM1

Parallel port
+12V power connector FDD port
PS/2 keyboard & mouse
Dual USB ports

Dual GbE ports

VGA port

Four USB ports


Intel® Q965 Intel® ICH8DO
LGA 775 socket

FEATURES GENERAL
Processor CPU & Package: Intel ® CoreTM 2 Duo, Pentium ® D, Pentium® 4, Celeron® D
 Support 45nm Intel® CoreTM 2 Duo processor processor in the LGA-775 package
that generates a maximum 65W TDP. Lower FSB: 1066/800/533MHz
TDP than socket 775 Pentium® 4 processor Chipset/Core Logic Intel® Q965 and ICH8DO
makes the vertical mount slot board more
reliable System Memory Up to 4GB DDR2 800/667/533 SDRAM on dual 240-pin DIMM sockets

BIOS Award BIOS


 Low profile processor improves stability and
reliability of whole system Storage Devices EIDE: N/A
SATA: Support six SATA 300 drives (dual SATA ports via backplane)
 More features, such as EM64T, EIST, XD & VT, (RAID 0, 1, 5, 10)
can be easily applied to system by changing Solid State Disk N/A
processor
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.

 Integrated Intel® GMA 3000 graphics engine Expansion Interface Four PCI Express x1, one PCI Express x16 and four PCI
built with high grade display capability Hardware Monitoring System monitor (fan, temperature, voltage)

 Lockable cable-latched notches of SATA connector Power Requirement Typical: [email protected]; [email protected]
secure connection in vibration condition Dimension : 338.5(L) x 126.39(W) mm; 13.33"(L) x 4.98" (W)
Dimension
PCB: 6-layer
 Embedded Intel® Active Management Technology
(AMT) remotely discovers, heals and protects Environment Operating Temperature: 0 to 60oC
networked computing assets using third-party Storage Temperature: -20 to 80oC
management and security applications Relative Humidity: 5% to 90%, non-condensing

MTBF 93,332 hrs


 System noise and heat are reduced through more
intelligent fan speed control algorithms by
integrated Intel® Quiet System Technology I/O
MIO Two serial (RS232 x1, selectable RS232/422/485 x1), one parallel and one
 Flexiblie design of four external PCI Express x1 FDD channel
could aggregate as one PCI Express x4 for storage IrDA N/A
device thru backplane
Ethernet - Dual 10BAST-T/100BAST-TX/1000BAST-T Ethernet
- PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connector with two LED indicators

ORDERING GUIDE Audio HDA interface, 2-channel Audio (Realtek ALC 262)

USB Ten USB 2.0 ports (four USB ports via backplane)
Standard ROBO-8912VG2AR
Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse
LGA-775 Core 2 Duo processor based PICMG
1.3 SHB with DDR2 SDRAM, VGA, Dual
Gigabit Ethernet, Audio and USB
DISPLAY
Optional PA-M1AU
Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator 3000
Multimedia kit with audio and USB ports
- Provides improved 3D multimedia capabilities including DirectX 9, Shader
PS/2 Keyboard/Mouse Cable with Bracket Model 3.0, OpenGL 1.5, Advanced De-interlacing, MPEG-2 hardware
PS/2 keyboard/mouse connectors on bracket acceleration
Low Profile LGA775 Cooler Intel® Dynamic Video Memory Technology (DVMT) 4.0 shares system memory
Graphic Memory
High efficiency slim cooler increases reliability up to 256MB
of system
Display Interface Support CRT interface up to QXGA 75Hz (2048x1536)

17 SBC-ROBO-8912VG2AR
Intel® Pentium® M or Celeron® M processor

ROBO-8911VG2A based PICMG 1.3 SHB with DDR2 SDRAM,


VGA, Dual Gigabit Ethernet, Audio and USB

Intel® 915GME Dual COM ports CF socket

Parallel port
Additional power source FDD port
TV-out connector LVDS panel connector

IDE connector
Dual SATA port

Dual USB ports

+12V power connector Dual GbE port

VGA port

Dual USB ports


Intel® ICH6
Two 200-pin DDR2 SODIMM sockets

FEATURES GENERAL
Processor CPU & Package: Intel ® Pentium ® M or Celeron ® M processor in mFCPGA
 ROBO-8911 offers flexible 400MHz and package
533MHz FSB selection of Intel® Pentium® M / FSB: 533/400MHz
Celeron® M that features high computing power Intel® 915GME and ICH6
Chipset/Core Logic
with low heat
System Memory Up to 2GB DDR2 533/400 SDRAM on two 200-pin SODIMM sockets
 Intel® new integrated engine GMA 900 provides Award BIOS
BIOS
better display quality and effects thru faster
engine; SGI OpenGL 1.4 and Microsoft DirectX Storage Devices EIDE: Support two EIDE devices with Ultra DMA 100/66/33
SATA: Support four SATA 150 devices (two through backplane)
9.0 supports latest external PCI Express x16
interface graphic’s card via backplane Solid State Disk One Type II CF socket; On Primary EIDE channel

Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
 Support dual view function via VGA, LVDS and
TV interfaces Expansion Interface - One PCI Express x16
- Four PCI Express x1
 Four SATA 150 ports for high speed storage - Four PCI
interface and easy cable routing System monitor (fan, temperature, voltage)
Hardware Monitoring
 Support four PCI Express x1, one PCI Express Power Requirement Typical: [email protected]; [email protected]
x16 and four PCI expansion via backplane
Dimension Dimension: 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 8-layer

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 91,855 hrs

I/O
MIO Two serial (selectable RS232/422/485 x1), one parallel, one FDD channel

IrDA IrDA 1.0


ORDERING GUIDE - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
Ethernet
- Dual RJ-45 connector with two LED indicators
Standard ROBO-8911VG2A
Socket mPGA479M Pentium® M or Celeron® Audio AC'97 2.2 Audio (Realtek ALC 202A)
M processor based PICMG 1.3 SHB with USB Eight USB 2.0 ports (four through backplane)
DDR2 SDRAM, VGA, Dual Gigabit Ethernet
and Audio Keyboard & Mouse Two USB 2.0 ports on bracket for keyboard & mouse

Optional PA-M1AU
Multimedia kit with audio and USB ports DISPLAY
PS/2 Keyboard/Mouse with Bracket Graphic Controller 915GM integrated Graphics Media Accelerator 900 (GMA 900)
PS/2 keyboard/mouse connectors on bracket
Graphic Memory Dynamic system memory sharing up to 224MB (Intel® DVMT 3.0) or static
system memory sharing up to 128MB

Display Interface CRT: Up to 2048 x1536 mode


LVDS: Single/Dual 18-bit LVDS channel support
TV: Up to 1024 x 768 resolution supported for NTSC/PAL

SBC-ROBO-8911VG2A 18
Intel® Pentium® 4 or Celeron® D processor

ROBO-8910VG2A based PICMG 1.3 SHB with DDR2 533 SDRAM,


VGA, Dual Gigabit Ethernet and Audio

CF socket
Additional power source
+12V power connector IDE connector
Parallel port FDD port
Two 240-pin DDR2 DIMM sockets

Dual COM ports


Dual USB ports
Four SATA ports
Dual USB ports

Dual GbE ports

VGA port

Intel® 915GV Intel® ICH6


mPGA478 socket

FEATURES GENERAL
Processor CPU & Package: Intel® Pentium® 4 or Celeron® D processor in mFCPGA package
 High quality and reliable design with wider FSB: 800/533MHz
range Intel® Pentium® 4/ Celeron® D
Chipset/Core Logic Intel® 915GV and ICH6
processor to support mission critical
operation System Memory Up to 2GB DDR2 533/400 SDRAM on two 240-pin DIMM sockets
®
 Intel 915GV chipset with high performance BIOS Award BIOS
integrated graphics, backed up by Intel® EIDE: Support two EIDE devices with Ultra DMA 100/66/33
Storage Devices
IPD’s long product life support SATA: Support four SATA 150 drives

 Intel® new GMA 900 integrated provides Solid State Disk - One type II CF socket; On Primary EIDE channel
- Bootable for no drive on primary channel
better display quality and effects thru faster
engine; SGI OpenGL 1.4, Microsoft DirectX Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
9.0 supported Expansion Interface - Four PCI Express x1
- Four PCI
 Four SATA 150 ports for high speed storage
interface and easy cable routing Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement Typical: [email protected]; [email protected]


 Support four PCI Express x1, and four PCI
expansion via backplane (additional one PCI Dimension Dimension : 338.5(L) x 126.39(W) mm; 13.33"(L) x 4.98" (W)
Express x16 per project spec.) PCB: 8-layer

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 115,533 hrs

I/O
MIO Two serial (selectable RS232/422/485 x1), one parallel, one FDD channel
ORDERING GUIDE
IrDA IrDA 1.0
Standard ROBO-8910VG2A - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
Ethernet
Socket 478 Pentium ® 4 or Celeron® D - Dual RJ-45 connectors with two LED indicators
processor based PICMG 1.3 SHB with DDR2
Audio AC’97 2.2 Audio (Realtek ALC 202A)
SDRAM, VGA, Dual Gigabit Ethernet and
Audio USB Eight USB 2.0 ports (four ports through backplane)
Optional PA-M1AU Keyboard & Mouse Two USB 2.0 ports on bracket for keyboard & Mouse
Multimedia kit with audio and dual USB port
PS/2 Keyboard/Mouse with Bracket
PS/2 keyboard/mouse connectors on bracket
DISPLAY
Graphic Controller 915GV integrated Graphics Media Accelerator 900 (GMA 900)

Graphic Memory Dynamic system memory sharing up to 224MB (Intel® DVMT 3.0) or static
system memory sharing up to 128MB

Display Interface Display resolution up to 2048 x 536 @ 85Hz refresh

19 SBC-ROBO-8910VG2A
Intel® CoreTM 2 Quad processor based

ROBO-8779VG2AR PICMG 1.0 SBC with DDR3 SDRAM, VGA,


DVI, Dual Gigabit Ethernet, Audio and USB

COM2 (RS232/422/485 selectable)


CF socket
Dual 240-pin DDR3 DIMM sockets FDD port
+12V power connector COM1 Parallel port

PS/2 K/B & Mouse


Six USB ports

Dual USB ports

Dual GbE ports

VGA port

Intel® G41 Intel® ICH7R


LGA775 socket Four SATA ports
SDVO connector
DVI-D connector

FEATURES GENERAL
Processor CPU & Package: Intel ® CoreTM 2 Quad, CoreTM 2 Duo, Celeron ® processor in
 Support Intel® CoreTM 2 Duo and CoreTM 2 Quad LGA-775 package
processors and offers flexible 1333/1066/ FSB: 1333/1066/800MHz
800Mhz FSB selection Chipset/Core Logic Intel® G41 and ICH7R

 Delivers up to 4GB maximum DDR3 1066/ System Memory Up to 4GB DDR3 1066/800 SDRAM on two 240-pin DIMM socket
800 on two long DIMM sockets BIOS AMI BIOS

 Support Intel® G41 integrated GMA X4500 Storage Devices EIDA: N/A
graphic engine delivers optimized 3D graphics SATA: Support four SATA 300 drives (RAID 0, 1, 5, 10)
With RAID on ROBO-8779VG2AR, W/o RAID on ROBO-8779VG2A
performance
Solid State Disk One Type II CF socket (up to UDMA5 mode)
 Support dual display VGA and DVI-D interface,
and SDVO connector for other types display by Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
project Expansion Interface N/A

 High speed dual Gigabit Ethernet based on PCI Hardware Monitoring System monitor (fan, temperature, voltage)
Express x1, high bandwidth I/O interface Power Requirement N/A

 Support one CF socket up to UDMA5 mode Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 8-layer
 Rich I/O connections such as FDD, two Gigabit
Environment Operating Temperature: 0 to 55oC
Ethernet, serial ports, parallel port, USB 2.0, and Storage Temperature: -20 to 80oC
SATA ports Relative Humidity: 5% to 90%, non-condensing

MTBF N/A

ORDERING GUIDE I/O


MIO Two serial (RS232 x1, selectable RS232/422/485 x1), one parallel and one
Standard ROBO-8779VG2AR
FDD channel
Intel ® Core™ 2 Quad processor based PICMG
1.0 SBC with DDR3 SDRAM, VGA, DVI, Dual IrDA N/A
Gigabit Ethernet, Audio and USB
Ethernet - Dual 10 BASE-T/100 BASE-TX/1000 BASE-T Ethernet
ROBO-8779VG2A - PCI Express x1 interface based Gigabit Ethernet
Intel ® Core™ 2 Quad processor based PICMG - Dual RJ-45 connectors with two LED indicators
1.0 SBC with DDR3 SDRAM, VGA, DVI, Dual HDA interface, 2-channel Audio (Realtek ALC 662)
Audio
Gigabit Ethernet, Audio and USB
USB Eight USB 2.0 ports (Dual ports on bracket)
Optional PA-M1AU
Multimedia kit with audio and USB ports Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse
PS/2 Keyboard/Mouse Cable with Bracket
PS/2 keyboard/mouse connectors on bracket DISPLAY
USB Cable with bracket
Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator (GMA) x4500
Two USB ports with bracket
- Provided improved 3D multimedia capabilities including Microsoft DirectX 10,
PA-G1D Shader Model 4.0 and OpenGL 2.0
DVI output card via board to board SDVO
connector Graphic Memory Intel® Dynamic Video Memory Technology (DVMT) 5.0 shares system memory
Low Profile LGA775 Cooler up to 1GB
High efficiency slim cooler increases reliability Display Interface Analog CRT: up to 2048 x 1536
of system DVI-D: up to 2048 x 1536

SBC-ROBO-8779VG2AR 20
Intel® CoreTM 2 Duo processor based PICMG

ROBO-8777VG2A SBC with DDR2 SDRAM, VGA, Dual


Gigabit Ethernet, Audio and USB

COM2 (RS232/422/485 selectable)


Four SATA 300 ports
Dual 240-pin DDR2 DIMM sockets COM1

Parallel port
+12V power connector FDD port
PS/2 keyboard & mouse
Dual USB ports

Dual GbE ports

VGA port

Intel® Q965 Four USB ports


Intel® ICH8
LGA 775 socket
ISA Bus

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Duo, Pentium® D, Pentium® 4, Celeron® D
 Support Intel® CoreTM 2 Duo processor that processor in the LGA-775 package
generates a maximum 65W TDP. Lower TDP FSB: 1066/800/533MHz
than socket 478 Pentium® 4 processor makes Chipset/Core Logic Intel® Q965 and ICH8
the vertical mount slot board more reliable Up to 4GB DDR2 800/667/533 SDRAM on dual 240-pin DIMM socket
System Memory
 Low profile processor cooler improves Award BIOS
BIOS
stability and reliability of whole system
Storage Devices EIDE: N/A
 More features, such as EM64T, EIST, XD & SATA: Support four SATA 300 drives
VT, can be easily applied to system by Solid State Disk N/A
changing processor
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
 Integrated Intel® GMA 3000 graphics engine Expansion Interface N/A
built with high grade display capability
Hardware Monitoring System monitor (fan, temperature, voltage)
 Lockable cable-latched notches of SATA Power Requirement Typical: [email protected]; [email protected]
connector secure connection in vibration
Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
condition PCB: 6-layer
 Support ISA expansion Environment Operating Temperature: 0 to 60oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 93,788 hrs

I/O
MIO Two serial (RS-232x1, selectable RS232/422/485x1), one parallel and one
FDD channel

IrDA N/A
ORDERING GUIDE
Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
Standard ROBO-8777VG2A - PCI Express x1 interface based Gigabit Ethernet
LGA-775 Core 2 Duo processor based PICMG - Dual RJ-45 connectors with two LED indicators
1.0 SBC with DDR2 SDRAM, VGA, Dual Audio HDA interface, 2-channel Audio (Realtek ALC 262)
Gigabit Ethernet, Audio and USB
USB Six USB 2.0 ports
Optional PA-M1AU Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse
Multimedia kit with audio and USB ports
PS/2 Keyborad/Mouse Cable with Bracket
PS/2 keyboard/mouse connectors on bracket DISPLAY
Low Profile LGA775 Cooler
Graphic Controller - GMCH integrated Intel Graphics Media Accelerator 3000 (Intel® GMA 3000)
High efficiency slim cooler increases reliability - Provides improved 3D multimedia capabilities including DirectX 9, Shader
of system Model 3.0, OpenGL 1.5, Advanced De-interlacing, MPEG-2 hardware
acceleration

Graphic Memory Intel® Dynamic Video Memory Technology (DVMT) 4.0 system memory sharing
up to 256MB

Display Interface Support CRT interface up to QXGA 75Hz (2048 x 1536)

21 SBC-ROBO-8777VG2A
Intel® CoreTM 2 Duo processor based PICMG

ROBO-8773VG SBC with DDR SDRAM, VGA, Gigabit


Ethernet and USB

COM2
Two SATA ports
Two 184-pin DIMM sockets
Two IDE connectors COM1 (RS-232/422/485 selectable)

+12V power connector Parallel port


FDD port

Two USB ports

GbE ports
6-pin mini-DIN connector
for KB/Mouse
VGA port

Intel® 865G Six USB ports


Intel® ICH5
LGA 775 socket Standalone Power Source
ISA Bus

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Duo, Pentium® D, Pentium® 4, Celeron® D
 Extreme cost / performance PICMG 1.0 single processor in LGA-775 package
FSB: 800/533MHz
board computer supports LGA 775 processor
with Gigabit Ethernet controller Chipset/Core Logic Intel® 865G and ICH5

System Memory Up to 2GB DDR 400/333/266 SDRAM on dual 184-pin DIMM socket
 Various I/O interface includes dual IDE channel,
dual SATA port, single FDD channel, dual serial BIOS Award BIOS
and single parallel port
Storage Devices EIDE: Support four EIDE devices with Ultra DMA 100/66/33
 Over-clocking extended the board supports 2nd SATA: Support dual SATA 150 drives
generation, lower power consumption / thermal Solid State Disk N/A
profile Core 2 Duo processor
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
 Integrated Intel® Extreme Graphics 2 graphics Expansion Interface N/A
engine offers adequate display quality via VGA
Hardware Monitoring System monitor (fan, temperature, voltage)
interface
Power Requirement Typical: [email protected]; [email protected]
 Single side design enhance reliability of
production and simplify its process at the Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 6-layer
same time
Environment Operating Temperature: 0 to 55oC
 Eight plug-and-play USB 2.0 ports allow Storage Temperature: -20 to 80oC
enriched expansion of the system built Relative Humidity: 5% to 90%, non-condensing
upon the board MTBF 105,743 hrs
 Support ISA expansion
I/O
MIO Two serial (RS232 x1, selectable RS232/422/485 x1), one parallel and one
FDD channel
ORDERING GUIDE
IrDA N/A

Standard ROBO-8773VG Ethernet - Single 10BASE-T/100BASE-TX/1000BASE-T Ethernet


LGA-775 processor based PICMG 1.0 SBC - PCI interface based Gigabit Ethernet
with DDR SDRAM, VGA, Gigabit Ethernet - Single RJ-45 connector with two LED indicators
and USB AC’97 interface reserved
Audio
Optional USB Cable with bracket USB Eight USB 2.0 ports (Dual ports on bracket)
Two USB ports with bracket
Keyboard & Mouse One 6-pin mini-DIN connector for Keyboard & Mouse
Low Profile LGA775 Cooler
High efficiency slim cooler increases reliability
of system
PA-M5A DISPLAY
Audio kit Graphic Controller - GMCH integrated Intel® Extreme graphics 2 technology
- High performance 3D setup & render engine and hardware motion
compensation for MPEG2

Graphic Memory Intel® Dynamic Video Memory Technology (DVMT) 2.0 system memory sharing
up to 64MB

Display Interface Support CRT interface up to QXGA 75Hz (2048 x 1536)

SBC-ROBO-8773VG 22
Intel® latest 45nm CoreTM 2 Duo or Celeron® M

ROBO-8719VG2AR processor based PICMG SBC with DDR2


SDRAM, VGA, Dual Gigabit Ethernet and Audio

Additional power source


COM2 (RS232/422/485 selectable)
Dual 240-pin DDR2 DIMM sockets
FDD CF socket

+12V power connector Intel® GM45 Parallel port


COM1

PS/2 K/B & Mouse


Four USB ports

Dual USB ports

Dual GbE ports

VGA port

LVDS connector Intel® ICH9ME


Three SATA ports
SDVO connector

FEATURES GENERAL
Processor CPU & Package: Intel® 45nm Mobile CoreTM 2 Quad, CoreTM 2 Duo, Celeron® M
processor in mFCPGA package
 ROBO-8719VG2A offers flexible FSB up to 1066MHz
FSB: 1066/800/667MHz
selection of Intel® 45nm Mobile CoreTM 2 Quad,
CoreTM 2 Duo or Celeron® M processor that features Chipset/Core Logic Intel® GM45 and ICH9ME
high computing power with low heat System Memory Up to 4GB DDR2 800/667 SDRAM on dual 240-pin DIMM socket
th ®
 Integrated 5 generation graphic engine Mobile Intel BIOS Award BIOS
GMA 4500MHD built with max. graphics core speeds
Storage Devices EIDE: N/A
up to 533MHz to improve graphics and 3D rendering SATA: Support three SATA 300 drives (RAID 0, 1)
performance
Solid State Disk One Type II CF socket (Up to UDMA5 mode)
 Support two on-board display output options, Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
including VGA and 24-bit LVDS for flexible display
Expansion Interface N/A
choice. An optional DVI-D output card support via
board to board SDVO connector by project Hardware Monitoring System monitor (fan, temperature, voltage)

 ®
Support integrated Intel Trusted Platform Module Power Requirement Typical: [email protected]; +12V@2A
(iTPM) for more secure plateforms Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 8-layer
 Support CF socket by SATA to IDE bridge for more
Environment Operating Temperature: 0 to 60oC
storage application
Storage Temperature: -20 to 80oC
 High speed dual Gigabit Ethernet support Relative Humidity: 5% to 95%, non-condensing

MTBF 111,404 hrs


 Various I/O interface includes three high-speed
SATA 300 ports, six USB 2.0 ports, single Parallel
port, two COM ports and single FDD port I/O
MIO Two serial (RS232 x1, selectable RS232/422/485 x1), one parallel and one
FDD channel

IrDA N/A

Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet


ORDERING GUIDE - PCI Express x1/GLCI/LCI interface based Gigabit Ethernet
- Dual RJ-45 connector with two LED indicators
Standard ROBO-8719VG2AR
Audio HDA interface, 2-channel Audio (Realtek ALC 262)
Intel ® latest 45nm CoreTM 2 Duo or Celeron® M
processor based PICMG SBC with DDR2 SDRAM, USB Six USB 2.0 ports
VGA, Dual Gigabit Ethernet, and Audio
Keyboard & Mouse Two USB 2.0 on bracket dedicated to keyboard & mouse
Optional PA-M1AU
Multimedia kit with audio and USB ports
PS/2 Keyboard/Mouse Cable with Bracket
DISPLAY
PS/2 keyboard/mouse connectors on bracket Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator 4500MHD
- Provides improved 3D multimedia capabilities including DirectX 10, OpenGL
PA-G1D
2.0, MPEG-2 hardware acceleration
DVI output card via board to board SDVO connector
Graphic Memory Intel® Dynamic Video Memory Technology (DVMT) 5.0 shares system memory
to 256MB

Display Interface CRT: Up to QXGA (2048x1536 mode)


LVDS: Dual channel 24-bit LVDS
SDVO: Optional DVI-D output card via SDVO channel
(Two display streams supported in above combination)

23 SBC-ROBO-8719VG2AR
Ultra Low Voltage Intel® Celeron® M

ROBO-8771VG2 processor based PICMG SBC with


VGA and LAN

Standalone power connector


Parallel port
Two IDE connectors
One 200-pin SO-DIMM socket FDD port

PS/2 KB/Mouse connector


Dual COM ports

Dual USB ports

Dual GbE ports

VGA port

Intel® ULV Celeron® M Intel® 852GM Intel® ICH4


600MHz processor

FEATURES GENERAL
Processor CPU & Package: Ultra Low Voltage Intel® Celeron® M 600MHz processor
FSB: 400MHz
 On-board Ultra Low Voltage Intel® Celeron® M
600MHz with L2 Cache processor with passive heat Chipset/Core Logic Intel® 852GM and ICH4
sink for misson critical & fanless application System Memory Up to 1GB DDR 200/266 SDRAM on one 200-pin SODIMM socket

 Ideal replacement in terms of cost, functionality and BIOS Award BIOS 184-pin DIMM socket
performance
Storage Devices Support dual EIDE devices with Ultra DMA 100/66/33
 Stand alone workable single board computer N/A
Solid State Disk
 Rich I/O connections such as IDE, Gigabit Ethernet, Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
serial port, parallel port, and USB ports
Expansion Interface N/A

Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement Typical: [email protected]; [email protected]

Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)


PCB: 6-layer

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 75oC
Relative Humidity: 5% to 95%, non-condensing

MTBF 130,741 hrs

ORDERING GUIDE
I/O
Standard ROBO-8771VG2
MIO Two serial (one RS232/422/485 selectable), one parallel, one FDD channel
Ultra Low Voltage Intel® Celeron® M processor
based PICMG SBC with VGA and LAN IrDA N/A

Ethernet - 10BASE-T/100BASE-TX/1000BASE-T Ethernet


Optional USB Cable with bracket
- IEEE 802.3u auto-negotiation
Two USB ports with bracket
- Dual RJ-45 connector with two LED indicators
PS/2 Keyboard/Mouse Cable with Bracket
PS/2 keyboard/mouse connectors on bracket Audio AC'97 2.2 interface reserved
PA-M5A USB Six USB 2.0 ports
Audio kit
Keyboard & Mouse Two ports USB 2.0 on bracket dedicated to keyboard & mouse

DISPLAY
Graphic Controller Intel® 852GM mobile optimized graphics controller

Graphic Memory Dynamically allocates 32/64MB system memory for display

Display Interface Support VGA (DB15 on bracket) interface

SBC-ROBO-8771VG2 24
Intel® Pentium® M or Celeron® M processor

ROBO-8718VG2A based PICMG SBC with DDR2 533 SDRAM,


VGA, Dual Gigabit Ethernet and Audio

Dual COM port


Four SATA ports
Intel® 915GME Parallel port

CF socket
TV-out connector LVDS panel connector

FDD port
IDE connector

Dual USB ports


Additional power source

+12V power connector Dual GbE ports

VGA port

mPGA479M socket Dual USB ports


Two 200-pin SO-DIMM sockets Intel® ICH6

FEATURES GENERAL
Processor CPU & Package: Intel® Pentium® M or Celeron® M processor in mFCPGA
 ROBO-8718 offers flexible 400MHz and package
533MHz FSB selection of Intel® Pentium® M / FSB: 533/400MHz
Celeron® M that features high computing power Chipset/Core Logic Intel® 915GME and ICH6
with low heat
System Memory Up to 2GB DDR2 533/400 SDRAM on two 200-pin SODIMM sockets
 Scalable graphics support from Intel® 915GM BIOS Award BIOS
featuring GMA 900 to ATI M22 graphics
Storage Devices EIDE: Support two EIDE devices with Ultra DMA 100/66/33
controller integrated 64MB display memory via SATA: Support four SATA 150 drives
PCI Express x16
Solid State Disk - One Type II CF socket
 ATI M22 graphics support dual display - On Primary EIDE channel
configuration of LCD/CRT, TV/ CRT, LCD/LCD, - Bootable for no drives on primary channel
LCD/TV displays Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.

 High speed dual Gigabit Ethernet based on PCI Expansion Interface N/A
Express x1, high bandwidth I/O interface System monitor (fan, temperature, voltage)
Hardware Monitoring
 Four SATA 150 ports for high speed storage Power Requirement Typical: [email protected]; [email protected]
interface and easy cable routing
Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 8-layer

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 77,830 hrs


ORDERING GUIDE
Standard ROBO-8718VG2A I/O
Socket mPGA479M Pentium® M or Celeron ® Two serial (selectable RS232/422/485 x1), one parallel, one FDD channel
MIO
M processor based PICMG SBC with DDR2
533 SDRAM, VGA, Dual Gigabit Ethernet and IrDA IrDA 1.0
Audio - 10BASE-T/100BASE-TX/1000BASE-T Ethernet
Ethernet
PA-M1AU - Dual PCI-Express x1 based
Optional
Multimedia kit for P4 SBC with audio and USB - Dual RJ-45 connectors with two LED indicators
ports AC’97 2.2 Audio (Realtek ALC 202A)
Audio
DVI-D Cable
TMDS adapter cable for DVI interface flat USB Four USB 2.0 ports
panel Two USB 2.0 ports on bracket dedicated to keyboard & mouse
Keyboard & Mouse

DISPLAY
Graphic Controller - ATI Mobility M22 graphics controller [ROBO-8718UG2A]
- Intel® 915GM integrated GMA 900 (Graphics Media Accerator) [ROBO-8718VG2A]

Graphic Memory 64MB display memory

Display Interface - Support CRT, LVDS, TV-out & DVI-D (TMDS) display interfaces [ROBO-
8718UG2A]
- Support CRT, LVDS & TV-out display interfaces [ROBO-8718VG2A]

25 SBC-ROBO-8718VG2A
Intel® Pentium® 4 or Celeron® D processor

ROBO-8713VGA based PICMG SBC with DDR 400 SDRAM,


AGP 8X VGA, Gigabit Ethernet and Audio

CF socket
+12V power connector Additional power source
Two IDE connectors
Two 184-pin DIMM sockets

FDD port
Parallel port
Two Serial ATA ports
Two COM ports
GbE LAN port

Two USB 2.0 ports


PS/2 KB/Mouse connector
PCI extension conncector
VGA port

Intel® 865G Intel® ICH5


mPGA478 socket

FEATURES GENERAL
Processor CPU & Package: Intel® Pentium® 4 or Celeron® (D) processor in mPGA478
Intel ® Pentium® 4 processor with Hyper-
 package
Threading technology runs at 800MHz FSB FSB: 800/533/400MHz

Chipset/Core Logic Intel® 865G and ICH5


 Wire-speed Gigabit Ethernet based on
Communication Streaming Architecture System Memory Up to 2GB dual channel DDR 400/333/266 SDRAM on two 184-pin DIMM
sockets
(CSA) with double throughput than PCI
based Ethernet BIOS Award BIOS

Storage Devices EIDE: Support four EIDE devices with Ultra DMA 100/66/33
 Rich expansion capability thru proprietary PCI
SATA: Support two SATA 150 devices

Solid State Disk - One Type II CF socket


- On Secondary EIDE channel

Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.

Expansion Interface Proprietary PCI connection interface

Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement Typical: [email protected]; +12V(CPU)@5.7A; +12V (system)@0.8A

Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)


PCB: 8-layer

Environment Operating Temperature: 0 to 50oC


ORDERING GUIDE Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
Standard ROBO-8713VGA
MTBF 98,733 hrs
Socket 478 Pentium® 4 or Celeron® D processor
based PICMG SBC with DDR 400 SDRAM, integrated
graphic, Gigabit Ethernet and audio

Optional ROBO-U160H I/O


SCSI extension module with Portwell OmniPCITM Two serial (selectable RS232/422/485 x1), one parallel, one FDD channel
connection interface MIO
ROBO-N100P IrDA IrDA 1.0
Single Fast Ethernet port extension module with
Portwell OmniPCITM connection interface Ethernet - 10BASE-T/100BASE-TX/1000BASE-T Ethernet
- Gigabit Ethernet via CSA interface
PA-M1AU
Multimedia kit for P4 SBC with audio and - One RJ-45 connector with two LED indicators
USB ports Audio AC’97 2.2 Audio (Realtek ALC 202A)

USB Four USB 2.0 ports (two on bracket)

Keyboard & Mouse - One 6-pin mini-DIN connector for keyboard and mouse
- One 5-pin header for external keyboard connection

DISPLAY
Graphic Controller Intel® 865 integrated Extreme Graphics 2.0

Graphic Memory 64MB display memory

Display Interface Support CRT display interface

SBC-ROBO-8713VGA 26
mPGA479M Pentium® M/Celeron® M

ROBO-6711VGA processor based half-size PCI SBC with


VGA, LCD, GbE and Audio

FEATURES GENERAL
Processor CPU & Package: Intel® Pentium® M/Celeron® M processor
 Support Intel® low power consumption 533/ FSB: 533/400MHz
400MHz FSB Pentium® M/Celeron® M processor Chipset/Core Logic Intel® 852GME and ICH4
for thermal/power limited applications
System Memory Up to 1GB DDR 266/333 SDRAM with ECC on one 200-pin SODIMM socket
 One SODIMM socket at the rear that supports up
BIOS Award BIOS
to 1GB ECC system memory for critical
applications Storage Devices - Support dual EIDE channel with Ultra DMA 100/66/33
- One 44-pin and one 40-pin connector
 Support dual display function via VGA and Solid State Disk - One Type II CF socket
LVDS output - On secondary EIDE channel
- Bootable for no drives primary channel
 Perfect engine for slim computers with LVDS
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
interface LCD panel
Expansion Interface N/A
 On-board Intel® 10BASE-T/100BASE-TX/
Hardware Monitoring System monitor (fan, temperature, voltage)
1000BASE-T Gigabit Ethernet
Power Requirement Typical: [email protected]; +12V(CPU)@1.5A
 One Type II Compact Flash at the rear supports
Dimension Dimension : 185(L) x 122(W) mm; 7.3"(L) x 4.8" (W)
up to 1GB flash disk for installation OS without PCB: 8-layer
hard drive
Environment Operating Temperature: 0 to 55oC
 Audio Codec ’97 (AC’97) 2.2 for high quality Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
audio architecture
MTBF 116,027 hrs
 PCI bus interface for higher flexibility and
expandability
 Optional support TV-out by project I/O
MIO Two serial (one on bracket; one RS232/422/485 selectable), one parallel, one
FDD channel

IrDA IrDA 1.0

Ethernet - 10BASE-T/100BASE-TX/1000BASE-T Ethernet


- IEEE 802.3u auto-negotiation
- One RJ-45 connector with two LED indicators
ORDERING GUIDE Audio AC’97 2.2 Audio (Realtek ALC 203)

Standard ROBO-6711VGA USB Four USB ports


mPGA479M Pentium® M/Celeron® M processor One 6-pin mini-DIN connector for keyboard/mouse
Keyboard & Mouse
based half-size PCI SBC with VGA, LCD, GbE and
Audio
DISPLAY
Optional PA-M1AU
Multimedia kit with audio and USB ports on bracket Graphic Controller Intel® 852GME mobile optimized graphics controller

Graphic Memory Dynamical allocates 32/64MB system memory for display

Display Interface Support VGA (DB15 on bracket) and LVDS interface

27 SBC-ROBO-6711VGA
Ultra Low Voltage Intel® Celeron® M

ROBO-6730VLA processor based half-size PCI SBC with


VGA, LCD, LAN and Audio

FEATURES GENERAL
Processor CPU & Package: Ultra Low Voltage Intel® Celeron® M 600MHz processor
 Fanless solution with on-board Ultra Low FSB: 400MHz
Voltage Intel® Celeron® M 600MHz processor Chipset/Core Logic Intel® 852GM and ICH4

 Support dual display function via VGA and System Memory Up to 1GB DDR 200/266/333 SDRAM on one 200-pin SODIMM socket
LVDS output
BIOS Award BIOS
 Perfect engine for slim computers with LVDS Storage Devices Support dual EIDE devices with Ultra DMA 100/66/33
interface LCD panel
Solid State Disk - One Type II CF socket
 On-board Intel® 10BASE-T/100BASE-TX Fast - On secondary EIDE channel
- Bootable for no drives primary channel
Ethernet
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 sec.
 One SODIMM socket at the rear supports
up to 1GB system memory Expansion Interface N/A

Hardware Monitoring System monitor (fan, temperature, voltage)


 One Type II Compact Flash at the rear supports
up to 1GB flash disk for installation OS wtihout Power Requirement Typical: [email protected]; [email protected]
hard drive Dimension Dimension : 185(L) x 122(W) mm; 7.3"(L) x 4.8" (W)
PCB: 8-layer
 Audio Codec '97 (AC'97) 2.2 for high quality
audio architecture Environment Operating Temperature: 0 to 55oC
Storage Temperature: -20 to 75oC
 PCI bus interface for higher flexibility and Relative Humidity: 5% to 95%, non-condensing
expandability MTBF 115,787 hrs

I/O
MIO Two serial (one on bracket; one RS232/422/485 selectable), one parallel, one
FDD channel

IrDA IrDA 1.0

Ethernet - 10BASE-T/100BASE-TX Ethernet


- IEEE 802.3u auto-negotiation support
- One RJ-45 connector
ORDERING GUIDE
Audio AC'97 2.2 Audio (Realtek ALC 202A)

Standard ROBO-6730VLA USB Four USB ports


Ultra Low Voltage Intel ® Celeron® M processor based
Keyboard & Mouse One 6-pin mini-DIN connector for keyboard/mouse
half-size PCI SBC with VGA, LCD, LAN and Audio

Optional PA-M1AU DISPLAY


Multimedia kit with audio and USB ports on bracket
Graphic Controller Intel® 852 mobile optimized graphics controller

Graphic Memory Dynamically allocates 32/64MB system memory for display

Display Interface Support VGA (DB15 on bracket) and LVDS interface

SBC-ROBO-6730VLA 28
PICMG Backplane
PICMG GENERAL DESCRIPTION
PICMG Backplane in this section are SBC (Single Board Computer)/SHB (Single Host Board) companion that feature
expansion slots such as ISA, PCI, PCI-X or PCI Express interface. In addition, backplane also features several power
connectors that draw power from power supply to devices on it. Some LEDs are designed on board to indicate status of
each power rail.

PICMG 1.0 supports both ISA & PCI, PICMG 1.2 supports dual PCI or PCI-X, and PICMG 1.3 supports PCI Express and PCI
expansion. Some bridges or switches can be applied to backplane to support more devices or different kind of expansion
interfaces. However, PICMG 1.0, 1.2, and 1.3 are not compatible with each other.

PICMG 1.0 BACKPLANE

Passive Backplane: Backplane that only support up to four PCI master


32-bit PCI/16-bit ISA
PBP-19P4 PBP-18D4

10.16
10.16

19-slot (4xPCI) PICMG Backplane 18-slot Dual-system PICMG Backplane

155.35
155.35

- Fit for 20-slot chassis - Fit for 20-slot chassis


265.2
265.2

- ATX power connector support - Designed for fault-tolerant computing


71.25

- ATX power connector support


71.25

79.5

- Sufficient ISA slots for CTI application


79.5

52.11 18.6 27.14


18.6
40.6 140.49 72.47 101.6 40.6
140.49 99.61 101.6
415.4
415.4

PBP-14P4 ACTI-14P4

10.16
10.16

14-slot (4xPCI) PICMG Backplane 14-slot (4xPCI) Active PICMG Backplane

159.44
155.35

- Fit for 14-slot chassis - 2.4 mm PCB thickness

257
257

- ATX power connector support - ATX power connector support


- The most popular and reliable - Fit for 14-slot chassis
67.16
75.41
71.25

PICMG backplane
79.5

18.6 69.14 18.6 69.14


212.96 69.94 212.96 69.94
317 317

PBP-13R4 PBP-13D4
10.16

10.16

13-slot (4xPCI) PICMG Backplane 13-slot Dual-system PICMG Backplane


155.35

155.35

- Fit for 14-slot chassis - Fit for 14-slot chassis


257

257

- Special design for full-length PCI cards - Design for fault-tolerant computing
- ATX power connector support - ATX power connector support
71.25

71.25
79.5

79.5

88.38 53.6 34.9 18.6 69.14


212.96 69.94 212.96 69.94
317 317

PBP-08P4 PBP-08P3
18.6

18.6
96.61
96.61

8-slot (4xPCI) PICMG Backplane 8-slot (3xPCI) PICMG Backplane


- Fit for node chassis and - Fit for node chassis and
212.96

212.96
217.96

217.96

desktop case desktop case


- ATX power connector support

71.25 10.16 71.25 10.16


79.5 155.35 79.5 155.35
257 257

PBP-06P4 PBP-06P3
6-slot (4xPCI) PICMG Backplane 6-slot (3xPCI) PICMG Backplane
140.20

140.7

- Fit for node chassis


121.2
121.20

- Fit for node chassis


96.00

96

- ATX power connector support


15

- ATX power connector support


55.5
55.50
15.0

10.10 165.1
4.39

25.33 253.1
165.60
263.1
254.10
263.10

29 Backplane-PICMG
PICMG Backplane
PBP-06V4 PBP-02V1X

33.7
Vertical 6-slot (4xPCI) PICMG Backplane 327.9 Vertical 2-slot (1xPCI) PICMG Backplane
84

Left View Right View


- Fit for 2U chassis - Fit for 1U chassis

33.7
331.9
- ATX and AT power connector support - ATX power connector support
Left View Right View 327.9
84

331.9

PBP-03P2X
39.5

337.11
Vertical 3-slot (2xPCI) PICMG Backplane
Left View Right View
- Fit for Portwell’s 1U chassis
39.5

- ATX power connector support


337.11

64-bit PCI/16-bit ISA


PBP-06P464 PBP-06V464

83.95
6-slot (4x64-bit PCI) PICMG Backplane Vertical 6-slot (4x64-bit PCI)
140.21
121.21

PICMG Backplane
96.1

- Fit for node chassis


55.5

331.98
15

10.1
- ATX and AT power connector support Left View Right View - Fit for 2U chassis
166.3
170.75 - ATX power connector
295.84
310.19
83.95

331.98

Active Backplane: Backplane that using bridge to support PCI master beyond four
PBP-19AI PBP-19AC
10.16

10.16

19-slot (18xPCI) Active PICMG 19-slot (12xPCI) Active PICMG


155.35
155.35

Backplane Backplane
265.2
265.2

71.25
71.25

79.5
89.69
79.5
89.69

18.6 27.17
18.6 27.17
52.11 72.47 40.6
52.11 40.6 88.38 101.57
88.38 72.47 101.57
415.4 415.4

PBP-14AC-B ACTI-14AA
6.87
10.16

14-slot (10xPCI) Active PICMG Backplane


33.06

14-slot (12xPCI) Active PICMG


162.68
155.35

Backplane - 2.4 mm PCB thickness


257.18
260

- ATX power connector support


- Fit for 14-slot chassis
66.87
72.56

74.98
89.86
12.06

16.51 8 15.99 18.66 68.95


141.01 108 61 212.79 68.15
317 316.87

PBP-14A7 PBP-14AC
10.16
10.16

14-slot (7xPCI) Active PICMG 14-slot (12xPCI) Active PICMG


155.35
155.35

Backplane Backplane
257
257

71.25
71.25

79.5
79.5

18.6 69.14 18.6


45.37 34.9 35.04
212.96 69.94 96.61 70.98
317 317

PBP-08A7
18.6
96.61

8-slot (7xPCI) Active PICMG


Backplane
212.96
217.96

71.25 10.16
79.5 155.35
257

Backplane-PICMG 30
PICMG Backplane
PICMG 1.3 Selection Guide
ROBO- ROBO- ROBO- ROBO-
Model PCIEx16 PCIEx8 PCIEx4 PCIEx1 PCI-X PCI
8921VG2R 8914VG2AR 8913VG2AR 8912VG2AR
PBPE-19AG64 1 (x8 signal) 1 (x4 signal) 16

PBPE-14AD64 1 1 8 3

Server PBPE-06V464 1 4
Grade PBPE-08P41 2 (x8 signal) 1 (x4 signal) 4

PBPE-06A364 2 (x8 signal) 2 1

PBPE-06P2 2 (x8 signal) 1 (x4 signal) 2

PBPE-13A8 1 3 8

PBPE-12A9 1 1 (x4 signal) 9

PBPE-12AA64 1 8 2

PBPE-06V3 1 1 (x4 signal) 3


Non-Server
PBPE-06V 1 4
Grade
PBPE-07P4 1 1 4

PBPE-05A364 1 2 1

PBPE-06P4 1 (x4 signal) 4

PBPE-06P3 1 1 3

PICMG 1.3 BACKPLANE

Server Grade Backplane


PBPE-19AG64 PBPE-14AD64
10.16

19-slot [PCI-E x16 (1, x8 signal), 14-slot [PCI-E x4 (1), PCI-E x8 (1), PCI-X (8),
154.94

160.10

PCI-E x8 (1, x4 signal), PCI-X (16)] PCI (3)]


196.93
232.49
239.96
302.26

273

- Fit for 4U up chassis - Fit for 4U chassis


327

- Four PCI-X buses support 16 PCI-X - Four PCI-X buses support eight PCI-X
65.41

expansion slots expansion slots


24.13
21.59

17.78
139.7 203.2 63.5
416.56
78.74
176.61
195.58
224.72
259.62
327

PBPE-08P41 PBPE-06V464
10.16

8-slot [PCI-E x8 (1, x4 signal), PCI-E x16 Vertical 6-slot [PCI-E x4 (1), PCI-X (4)]
84
160.10

(2, x8 signal), PCI (4)]


331.94
- Fit for 2U chassis
- Fit for Node chassis
327

Left View Right View - Dual PCI-X buses support four PCI-X slots
- Four USB ports
79.5

84
76.99

331.94
18.6
78.01 45.37 70.98
217

PBPE-06A364 PBPE-06P2
10.10

10.10

6-slot [PCI-E x16 (2, x8 signal), PCI-X (2), 6-slot [PCI-E x8 (1, x4 signal), PCI-E x16
155

155

PCI (1)] (2, x8 signal), PCI (2)]


- Fit for Node chassis
- Fit for Node chassis
327

327

- Four USB ports


- Four USB ports
88.5

- Dual SATA ports


88.5

- Two PCI-X buses support two PCI-X


expansion slot
61.36

61.36

10.13 10.13
55.5 40.5 25.2 55.5 40.5 25.2
140.20 140.20

31 Backplane-PICMG
PICMG Backplane
Non-Server Grade Backplane
PBPE-13A8 PBPE-12A9
13-slot [PCI-E x1 (3), PCI-E x16 12-slot [PCI-E x16 (1), PCI-E x8 (1,

160.10
154.94

(1), PCI (8)] x4 signal), PCI (9)]

196.93
191.77

239.96
234.80
267.84

273
311.84

- Fit for 4U chassis - Fit for 4U chassis

317
327

327
- Four USB ports - Four USB ports
- Dual SATA ports - Dual SATA ports
- 24-pin ESP12V power connector

78.74 78.74
176.61 176.61
195.58 195.58
224.72 224.72
259.62 259.62
317 317

PBPE-12AA64 PBPE-07P4

10.16
12-slot [PCI-X (8), PCI-E x16 7-slot [PCI-E x4 (1), PCI-E x16 (1), PCI (4)]
160.10

155.35
196.93

(1), PCI (2)] - Fit for Node chassis


239.96
273

- Four USB ports


317

- Fit for 4U chassis

327
327

- Four USB ports - Dual SATA ports

79.5
- Dual SATA ports

156.49
- Two PCI-X buses support eight
PCI-X expansion slot

78.74 49.38 78.01 45.37 70.98


176.61 194.36
195.58
217.96
224.72
259.62
317

PBPE-06V PBPE-06V3
Vertical 6-slot [PCI-E x8 (1, x4
84

84

Vertical 6-slot [PCI-E x1 (4),


PCI-E x16 (1)] signal),
331.94 331.94 PCI-E x16 (1), PCI (3)]
Left View Right View - Fit for 2U chassis Left View Right View
- Fit for 2U chassis
- Four USB ports
- Four USB ports
- Dual SATA ports
- Dual SATA ports
84
84

- 24-pin ESP 12V power connector

331.94 331.94

PBPE-06P3 PBPE-06P4
10.10

10.10

6-slot [PCI-E x16 (1), PCI-E x4 6-slot [PCI-E x8 (1, x4 signal),


155

155

(1), PCI (3)] PCI (4)]


- Fit for Node chassis - Fit for Node chassis
327

327

- Four USB ports - Four USB ports


88.5

- Dual SATA ports


88.5

- Dual SATA ports


149.86

149.86

10.13
10.13
40.5 40.5 25.2
40.5 40.5 25.2
140.2
140.2

PBPE-05A364
10.10

5-slot [PCI-E x16 (1), PCI-X (2),


155

PCI (1)]
- Fit for Node chassis
327

- Four USB ports


88.5

- Dual SATA ports


149.86

- Two PCI-X buses support two


PCI-X expansion slot

10.13
40.5 40.5 25.2

140.2

Backplane-PICMG 32
PCI & ISA Backplane
PCI GENERAL DESCRIPTION
 Compact size backplane for half size PCI SBC
 PICMG 1.0 Rev 2.1 Compliant (PCI golden finger only)
 Support AT or ATX type power connector
 4-layer PCB with power and ground planes to reduce
power noise and keep lower impedance
 Frame rated PCB at 94-V0
 User friendly design supports external K/B
connector, power for chassis fan and power indicator

PBP-05P PBP-04P
5-slot Passive PCI Backplane 4-slot Passive PCI Backplane
36.11
10.6
22.43
59.31

104.08
66.2
140.00
124.35

46.91
85.85

33.76
85.85
83.35
44.35

44.35

170

37.01
160.00
170.00

ISA GENERAL DESCRIPTION


 4-layer PCB with ground and power planes
for reducing noise and keeping lower impedance PBP-03I PBP-04I
3-slot Passive ISA Backplane 4-slot Passive ISA Backplane
 Frame Rated PCB at 94-V0
182 170
 LED power indicator for +5V, +12V, -5V and 12V 169 165.1
14.4 15.24
6 5
 Heavy duty terminal block connector for
industrial power supply wiring(*)
11

 Equipped with gold-plated socket for good contact


44
72

83.83
90

 Easy cut for dual or multi systems(*)


43.18
6.35

 Plug-in sockets of termination resistors for high-


speed signal.(*)
“*”means for most part of products

PBP-06I PBP-08I PBP-14I


6-slot Passive ISA Backplane 8-slot Passive ISA Backplane 14-slot Passive ISA Backplane

175.3 318.9
165 77.266 70.98 57
152.4 46.114
25.4 69.78
10.16

15.4
10.16
174.6
55.5
16

155.35
97.3

180.5
122.5
135

69.78 53.6 70.98

220.6

33 Backplane-PCI & ISA


IMB Reference Table

MODEL RUBY-9911 RUBY- RUBY- RUBY- RUBY-


9719VG2AR 9718VG2AR 9717VGAR 9716VG2AR

Form Factor ATX ATX ATX uATX ATX

Chipset Q45+ICH10DO G41+ICH7R Q965+ICH8DO Q965+ICH8DO Q965+ICH8DO

CoreTM 2 Quad/ CoreTM CoreTM 2 Quad/ CoreTM CoreTM 2 Quad/ CoreTM


CoreTM 2 Quad/ CoreTM 2 Quad/
CPU 2 Duo/ Pentium® D/ 2 Duo/ Pentium® D/ 2 Duo/ Pentium® D/
CoreTM 2 Duo CoreTM 2 Duo
Pentium® 4/ Celeron® D Pentium® 4/ Celeron® D Pentium® 4/ Celeron® D

Display VGA/DVI-D VGA VGA/DVI-D VGA/DVI-D VGA

Memory DIMM x2 and up to 4G DIMM x2 and up to 4GB DIMM x4 and up to 8GB DIMM x4 and up to 8GB DIMM x4 and up to 8GB

Four PCI slots, One Four PCI slots, One


One PCI-E x16 slot, One Four PCI slots, Two PCI-E Two PCI slots, One PCI-E
Expansion PCI-E x4 slot, One PCI- PCI-E x4 slot, One PCI-E
ISA slot and five PCI slot x1 slot, One ADD2 slot x4 slot, One ADD2 slot
Ex16 slot x16 slot

LAN Gbe x2 GbE x2 GbE x2 GbE x1 GbE x2

RS232 x3, RS232 x5, RS232 x3, RS232 x3, RS232 x3,
Serial RS232/422/485*1 RS232/422/485 x1 RS232/422/485 x1 RS232/422/485 x1 RS232/422/485 x1

USB USB 2.0*8 USB 2.0 x8 USB 2.0 x10 USB 2.0 x10 USB 2.0 x8

SATA SATA 4 SATA x4 SATA x6 SATA x6 SATA x5

IDE IDE x1 IDE x1 N/A N/A IDE x1

RAID RAID 0/1/5/10 RAID 0/1/5/10 RAID 0/1/5/10 RAID 0/1/5/10 RAID 0/1/5/10

SSD N/A CF x1 N/A N/A CF x1

Paralell LPT x1 LPT x1 LPT x1 LPT x1 LPT x1

FDD FDD x1 N/A FDD x1 FDD x1 FDD x1

IrDA -- N/A N/A N/A IrDA 1.0

Audio HDA 2 channel HDA 2 channel HDA 2 channel HDA 2 channel HDA 2 channel

Dimension 304.8 x 243.8mm 304.8 x 243.8mm 304.8 x 243.8mm 243.8 x 243.8mm 304.8 x 243.8mm

Page 36 37 38 39 40

IMB-Reference Table 34
IMB Reference Table

MODEL RUBY- RUBY- RUBY- RUBY-


9716VGAR 9715VG2AR 9713VG2AR 7720VG2A
Form Factor ATX ATX uATX uATX

Chipset Q965+ICH8DO 945G+ICH7R 945GME+ICH7R 915GME+ICH6M

CPU CoreTM 2 Quad/ CoreTM CoreTM 2 Duo/ Pentium®


CoreTM 2 Duo/ CoreTM
2 Duo/ Pentium® D/ D/ Pentium® 4/ Celeron® Pentium® M/ Celeron® M
Duo/ CoreTM Solo
Pentium® 4/ Celeron® D D

Display VGA VGA VGA/LVDS VGA/LVDS

Memory SO-DIMM x2 and up


DIMM x4 and up to 8GB DIMM x4 and up to 4GB DIMM x2 and up to 2GB
to 4GB

Expansion One PCI slot (support up


Four PCI slots, One PCI- Two PCI slots, One PCI-
Six PCI slots, One PCI-E to 4 PCI slots via riser
E x4 slot, One PCI-E x1 E x16 slot, One PCI-E
x16 slot card), One PCI-E x4 slot,
slot, One PCI-E x16 slot x1 slot
one PCI-E x16 slot

LAN GbE x1 GbE x2 GbE x2 GbE x2

Serial RS232 x3, RS232/422/ RS232 x1, RS232/422/ RS232 x1, RS232/422/ RS232 x3, RS232/422/
485 x1 485 x1 485 x1 485 x1

USB USB 2.0 x8 USB 2.0 x8 USB 2.0 x8 USB 2.0 x8

SATA SATA x5 SATA x4 SATA x4 SATA x2

IDE IDE x1 IDE x1 IDE x1 IDE x1

RAID RAID 0/1/5/10 RAID 0/1/5/10 RAID 0/1/5/10 N/A

SSD CF x1 N/A N/A CF x1

Paralell LPT x1 LPT x1 LPT x1 (pin header) LPT x1

FDD FDD x1 FDD x1 FDD x1 FDD x1

IrDA IrDA 1.0 IrDA 1.0 IrDA 1.0 IrDA 1.0

Audio HDA 2 channel AC’97 2.2 AC’97 2.2 HDA 2 channel

Dimension 304.8 x 243.8mm 312.8 x243.8mm 243.8 x 243.8mm 243.8 x 243.8mm

Page 41 42 43 44

35 IMB-Reference Table
Leading Intel® Core™ 2 Quad / Core™ 2 Duo
Processor based ATX motherboard with Dual
RUBY-9911 Display, Dual Gigabit Ethernet, Four SATA
Ports, Four COM Ports, and Eight USB Ports

Dual GbE ports & Four USB ports


Four PCI slots Audio Dual COM ports
VGA & DVI-D
PS/2 Keyboard & Mouse

Dual COM ports


PCI Express x4 slot
Parallel port
PCI Express x16 slot LGA 775 socket
IEEE1394a port
(optional) Two 240-pin DDR3 DIMM
Four USB ports sockets
Intel® ICH10DO VGA Gigabit Ethernet
Intel® Q45

FDD port

IDE connector ATX 24-pin power connector

Four SATA 300 ports


KB/MS DVI-D RS-232 USB Audio

Rear I/O

FEATURES GENERAL
Processor CPU & Package: Intel® Core™ 2 Quad / Core™ 2 Duo processor in LGA-775
 Intel® CoreTM 2 Quad / Core™ 2 Duo processor package
FSB: 1333/1066/800 MHz
 Intel® Q45 Express and ICH10DO chipset
Chipset/Core Logic Intel® Q45 Express and ICH10DO
 Two 240-pin DIMM sockets support dual channel System Memory Up to 4GB DDR3 800/1066MHz SDRAM on Two 240-pin DIMM sockets
DDR3 SDRAM up to 4GB
BIOS AMI BIOS
 Dual display: VGA / DVI-D, 3rd display via PCI or Storage Devices EIDE: Support one EIDE devices with Ultra DMA 100/66/33
PCI-Express expansion slot SATA: Support four SATA 300 drivers
RAID: RAID 0/1/5/10
 Four SATA ports and One IDE connector
Solid State Disk N/A
 Support RAID 0, 1, 5, 10 function Watchdog Timer Programmable via software from 1 sec. to 255 min.
 One PCI-Express x16, One PCI-Express x 4 and Expansion Interface -One PCI-Express x16 slot
Four PCI slots - One PCI-Express x4 slot
-Four 32-bit PCI expansion slots
 TPM 1.2 and iAMT 5.0 supported Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement TBD

Dimension Dimension : 308.4(L) x 243.8(W) mm ; 12’’(L) x 9.6’’(W)

Environment Operating Temperature: 0 to 60°C


Storage Temperature: -20 to 80°C
Relative Humidity: 10% to 90%, non-condensing

MTBF TBD

I/O
ORDERING GUIDE MIO - Four serial ports( RS232 x 3, selectable RS232/422/485 x 1)
- One D-SUB 15-pin and One D-SUB 24-pin at rear I/O panel
- One Parallel, One FDD channel, 8 GPIO
Standard RUBY-9911 - One IEEE1394a (Optional)
Intel® Core™ 2 Quad / Core™ 2 Duo processor ATX
Motherboard IrDA N/A

Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet


* Specifications are subject to change without notice. - Dual RJ-45 connector with two LED indicators at rear I/O pannel
* Core™ 2 Quad and Core™ 2 Duo processor are registered
Audio HD Audio interface, 2-channel Audio
trademarks of Intel® Corporation.
* Other trademarks, logo, brands and company names are the USB Eight USB ports (Four ports at rear I/O panel ; Four ports internal)
property of their respective owners.
Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel

DISPLAY
Chipset Intel® Q45 Integrated Intel® Gen 5.0 GMA 4500 Graphics

Display Memory Intel® Dynamic Video Memory Technology (Intel® DVMT 5.0)

Resolution Up to 2048 x1536 @ 75 Hz (QXGA)

DVI DVI-D interface

IMB-RUBY-9911 36
Intel® CoreTM 2 Duo/CoreTM 2 Quad Processor

RUBY-9719VG2AR based ATX Motherboard with DDR2, VGA,


Dual Gigabit Ethernet, Audio and USB

Dual GbE & Four USB VGA


Audio Powered COM (RS232/422/485)
PCI-E x16 slot Parallel port
PS/2 Keyboard & Mouse

ISA slot

Six PCI slots


LGA775 socket

PS/2 Keyboard & Mouse


Intel® ICH7R Intel® G41 Dual GbE
Header for TPM Parallel
Four power COM (RS232)
Eight GPIO Two 240-pin DDR2
DIMM sockets
Power COM (RS232)
COM Four USB
Compact flash socket VGA Audio
Four SATA
IDE connector ATX 24P power connector Rear I/O
Four USB

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, Intel® CoreTM 2 Duo processors in the
 Intel® CoreTM 2 Quad / Core 2 Duo Processor and LGA-775 Land Grid Array package targeted for desktop platforms
Intel® G41 Chipset, FSB up to 1333MHz Chipset/Core Logic Intel® G41 and ICH7R

 Two 240-pin DIMMs support dual channel DDR2 System Memory Max. up to 4GB DDR2 667/800 SDRAM on two 240-pin DIMM sockets with dual
SDRAM up to 4GB channel mode

BIOS AMI BIOS


 Dual Gigabit Ethernet port
Storage Devices - Four SATA 300 ports (RAID 0/1/5/10)
 Six 32-bit PCI slots / Five PCI slots and One - One IDE 44-pin connector
- One Compact Flash connector (share with IDE channel)
ISA slot
Watchdog Timer Programmable via software from 1 sec. to 255 min.
 Four SATA-300 ports support Intel Matrix Storage
Expansion Interface - One PCI-Express x16 slot
Technology with RAID 0, 1, 5, 10 - One ISA slot and five 32-bit PCI slots
or
 One 44pin IDE and one Compact flash share the Six 32-bit PCI slots
same channel
Hardware Monitoring System monitor (fan, temperature, voltage)
 PCIE x16 slot can support x1, x4, x8 or x16 cards Dimension Dimension : 305(L) x 244(W) mm; 12"(L) x 9.6" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 95%, non-condensing

MTBF TBD

I/O
MIO - Six Powered serial ports: One RS232/422/485 (5V/12V) selectable at rear I/O
and Five RS232 (5V/12V) internal
- One Parallel port at rear I/O
- 8 GPIO internal
- LPC pin header for optional TPM module

Display VGA

ORDERING GUIDE Ethernet - Dual Gigabit Ethernet Controller (Intel® 82583V x2)
- Dual RJ-45 connector with two LED indicator at rear I/O panel

Standard RUBY-9719VG2AR Audio HD Audio interface (Mic-In, Line-In, Line-Out)


45nm Intel® Core™ 2 Duo/Core™ 2 Quad Processor
based ATX Motherboard with DDR2, VGA, Dual Gigabit USB Eight USB ports (Four ports at rear I/O panel; Four ports internal)
Ethernet, Audio and USB Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel
RUBY-9719VGAR (One LAN, w/o ISA &RAID)
45nm Intel® Core™ 2 Duo/Core™ 2 Quad Processor
based ATX Motherboard with DDR2, VGA, One Gigabit
Ethernet, Audio and USB, w/o ISA & RAID DISPLAY
Graphic Controller - Intel® G41 integrated Intel® Gen. 5.0 GMA 4500 Graphics
- Intel® Dynamic Video Memory Technology 5.0
- Onboard display: VGA

37 IMB-RUBY-9719VG2AR
Intel® CoreTM 2 Quad processor based ATX
Industrial Mainboard with onboard DVI/VGA
RUBY-9718VG2AR Dual-Display, DDR2 SDRAM, VGA, Dual
Gigabit Ethernet, Audio and USB

Parallel port
GbE x2 PS/2 Keyboard & Mouse
Audio DVI-D VGA USB x4

ADD2 slot
Two PCI Express x1 slots
Four PCI slots

LGA 775 socket

PS/2 Keyboard & Mouse


Intel® Q965 GbE x2
Parallel port
Intel ICH8DO
®
Four 240-pin DDR2
DIMM sockets

ATX 24-pin power connector VGA Audio


USB x4
DVI-D
Six SATA-300 ports Rear I/O

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4,
 Industrial mainboard in ATX form factor that Celeron® D processor in the LGA-775 package
supports all Intel® mainstream desktop processors FSB: 1066/800/533MHz
- CoreTM 2 Quad, CoreTM 2 Duo, Pentium® D, Chipset/Core Logic Intel® Q965 and ICH8DO
Pentium® 4, Celeron® D processor in LGA-775
System Memory Up to 8GB DDR2 800/667/533 SDRAM on four 240-pin DIMM sockets
package
BIOS Award BIOS
 Benefits such as Hyper-Threading, EM64T, dual-
core, EIST, XD & VT of processor can be easily Storage Devices Six SATA 300 ports with RAID 0/1/5/10 support by Intel® Matrix Storage
Technology
applied to system by changing processor
Solid State Disk N/A
 Onboard dual independent display: VGA and
Watchdog Timer Programmable via software from 1 sec. to 255 min.
DVI-D
Expansion Interface - One ADD2 slot (single SDVO bus)
 One ADD2 graphics slot for ADD2 card - Two PCI Express x1 slots
- Four 32-bit PCI expansion slots
 Two PCI Express x1 slots and four 32-bit PCI System monitor (fan, temperature, voltage)
Hardware Monitoring
expansion slots
Power Requirement +12V(CPU)@8.75A; 12V(System)@3.6A; 5Vsb(System)@0.13A;
 Six SATA-300 ports, Intel® Matrix Storage 5V(System)@5.6A; 3.3V(System)@2.81A
Technology with RAID 0, 1, 5, 10 support Dimension Dimension : 304.8(L) x 243.8(W) mm; 12"(L) x 9.6" (W)

Environment Operating Temperature: 0 to 55oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF TBD

I/O
MIO Four serial ports(RS232/Powered selectable x2, selectable RS232/422/485 x1,
RS232 x1), one FDD, 12 GPIO

IrDA N/A

Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82573L, Intel®


82566DM)
ORDERING GUIDE - PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connector with two LED indicators at rear I/O panel

RUBY-9718VG2AR Audio HD Audio interface, 2-channel Audio


Standard
Intel® CoreTM 2 Quad processor based ATX Industrial Ten USB ports (Four ports at rear I/O panel; six ports internal)
USB
Mainboard with onboard DVI/VGA Dual-Display, DDR2
SDRAM, Dual Gigabit Ethernet, Audio and USB Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel

DISPLAY
Graphic Controller - GMCH integrated Intel® Graphics Media Accelerator 3000 (Intel® GMA 3000)
- ADD2 graphics slot (single SDVO bus) for ADD2 card
- Onboard dual independent display VGA and DVI-D

IMB-RUBY-9718VG2AR 38
Intel® CoreTM 2 Quad processor based
Micro-ATX Industrial Mainboard with

RUBY-9717VGAR onboard DVI/VGA Dual-display, DDR2


SDRAM, Gigabit Ethernet, Audio and USB

Parallel port
GbE & USB x2 PS/2 Keyboard & Mouse
Audio DVI-D VGA

Powered RS-232 x2

ADD2 slot
One PCI Express x4 slot

Two PCI slots


RS-232/422/485 LGA 775 socket

RS-232
Intel® Q965 PS/2 Keyboard & Mouse GbE
Parallel port
Intel® ICH8DO
Four 240-pin DDR2
DIMM sockets
FDD port
VGA Audio
DVI-D
Powered RS232 x2 USB x2
Eight USB ports GPIO ports ATX 24-pin power connector Rear I/O
Six SATA-300 ports

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4,
 Industrial mainboard in uATX form factor Celeron® D processor in LGA-775 package
that supports all Intel® mainstream desktop FSB: 1066/800/533MHz
processors - CoreTM 2 Quad, CoreTM 2 Duo, Chipset/Core Logic Intel® Q965 & ICH8DO
Pentium® D, Pentium® 4, Celeron® D processor Up to 8GB DDR2 800/667/533 SDRAM on four 240-pin DIMM sockets
System Memory
in LGA-775 package
BIOS Award BIOS
 Onboard dual independent display: VGA and
DVI-D Storage Devices Six SATA 300 ports with RAID 0/1/5/10 support by Intel® Matrix Storage
Technology
 One ADD2 graphics slot for ADD2 card Solid State Disk N/A
 One PCI Express x4 slot and two 32-bit PCI Watchdog Timer Programmable via software from 1 sec. to 255 min.
expansion slots - One ADD2 slot (single SDVO bus)
Expansion Interface
- One PCI Express x4 slot
 Six 32-bit PCI expansion slots for most - Two 32-bit PCI expansion slots
industrial I/O cards
Hardware Monitoring System monitor (fan, temperature, voltage)
 Six SATA-300 ports support Intel® Matrix
Power Requirement +12V(CPU)@3.31A ; +12V(System)@5.82A ; +5V(System)@5.95A
Storage Technology with RAID 0, 1, 5, 10
Dimension Dimension : 243.8(L) x 243.8(W) mm; 9.6"(L) x 9.6" (W)

Environment Operating Temperature: 0 to 55oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF TBD

I/O
MIO Four serial ports(RS232/Powered selectable x2 on rear panel, Selectable
RS232/422/485 x1, RS-232 x1), one FDD, 12 GPIO

IrDA N/A

Ethernet - Single 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82566DM)


ORDERING GUIDE - PCI Express x1 interface based Gigabit Ethernet
- Single RJ-45 connector with two LED indicators at rear I/O panel
Standard RUBY-9717VGAR HD Audio interface, 2-channel Audio
Audio
LGA-775 CoreTM 2 Quad processor based Micro-ATX
Industrial Mainboard with onboard DVI/VGA dual-display, USB Ten USB ports (Two ports at rear I/O panel; eight ports internal)
DDR2 SDRAM, Gigabit Ethernet, Audio and USB
Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel

DISPLAY
Graphic Controller - GMCH integrated Intel® Graphics Media Accelarator 3000 (Intel® GMA 950)
- ADD2 graphics slot (single SDVO bus) for ADD2 card
- Onboard dual independent display VGA and DVI-D

39 IMB-RUBY-9717VGAR
Intel® CoreTM 2 Quad processor based ATX

RUBY-9716VG2AR Industrial Mainboard with DDR2 SDRAM,


VGA, Dual Gigabit Ethernet, Audio and USB

VGA Port
GbE port & Dual USB port COM1 port (RS232/422/485 selectable)
Audio
Parallel port
PS/2 Keyboard & Mouse
GbE port & Dual USB port

PCI Express x16 expansion slot


PCI Express x4 expansion slot

RS232 selectable COM port LGA 775 socket


Four PCI expansion slots Intel® Q965

PS/2 Keyboard & Mouse


Intel® ICH8DO GbE x2
Parallel port
Dual RS232/Powered selectable COM port
Five SATA 300 ports Four 240-pin
Ten programmable GPIO ports DDR2 DIMM
CompactFlash socket sockets
Front panel I/O COM1 port USB x4 Audio
ATX V2.2 24-pin power connector VGA port
IDE connector
Four USB ports FDD port
Rear I/O

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4,
 Industrial mainboard in ATX form factor supports Celeron® D processor in LGA-775 package
all Intel® mainstream desktop processors - CoreTM FSB: 1066/800/533MHz
2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4, Chipset/Core Logic Intel® Q965 and ICH8DO
Celeron® D processor in LGA-775 package
System Memory Up to 8GB DDR2 800/667/533 SDRAM on four 240-pin DIMM sockets
 Benefits such as Hyper-Threading, EM64T, dual- Award BIOS
BIOS
core, EIST, XD & VT of processor can be easily
applied to system by changing processor Storage Devices EIDE: Support single EIDE device with Ultra DMA 100/66/33
SATA: Support five SATA 300 drives
 Embedded Intel 4th generation graphics engine Solid State Disk One Type II CF socket (only available if no IDE device attached)
provides better user experience of display
Watchdog Timer Programmable via software from 1 sec. to 255 min.
performance
Expansion Interface - Four 32-bit PCI expansion slots
 One PCI Express x16 slot features high-end - One PCI Express x4 slot for x1 or x4 card
graphics card connection interface or dual - One PCI Express x16 slot for PCIe x16 or PCIe x1 or ADD2/+ card
independent display with ADD2+ media card that Hardware Monitoring System monitor (fan, temperature, voltage)
provides TV tuner, video capture in and DVI, TV- Typical: [email protected]; [email protected]; 3.3V@3A
Power Requirement
out
Dimension Dimension : 304.8(L) x 243.8(W) mm; 12"(L) x 9.6" (W)
 One PCI Express x4 slot for storage add-in card
Environment Operating Temperature: 0 to 55oC
which provides reliable and safer data storage with Storage Temperature: -20 to 80oC
adequate I/O throughput Relative Humidity: 5% to 90%, non-condensing

 Five SATA 300 ports together with one IDE MTBF 73,803 hrs
channel and CF socket are perfect combination
to storage interface for all kinds of applications;
supports Intel® Matrix Storage Technology
I/O
MIO Four serial (RS232/TTL selectable x1, RS232/Powered selectable x2,
RS232/422/485 selectable x1), one at rear I/O panel, one parallel, one FDD
channel

IrDA IrDA 1.0

Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82573L, Intel®


82566DM)
- PCI Express x1 interface based Gigabit Ethernet
ORDERING GUIDE - Dual RJ-45 connector with two LED indicators at rear I/O panel

Audio HDA interface, 2-channel Audio


Standard RUBY-9716VG2AR
LGA-775 CoreTM 2 Quad processor based ATX Industrial USB Eight USB 2.0 ports (Four ports at rear I/O panel; four ports internal)
Mainboard with DDR2 SDRAM, VGA, Dual Gigabit
Ethernet, Audio and USB Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel

DISPLAY
Graphic Controller - GMCH integrated Intel® 4th generation Extreme Graphics controller
- Intel® GMA 3000 which provides improved 3D multimedia capabilities
including DirectX9, Shader Model 3.0, OpenGL 1.5, Advanced De-interlacing,
MPEG-2 hardware acceleration
- Support dual independent display with ADD2/+ card

IMB-RUBY-9716VG2AR 40
Intel® Core™ 2 Quad processor based ATX

RUBY-9716VGAR Industrial Mainboard with DDR2 SDRAM, VGA,


Gigabit Ethernet, Audio and USB

VGA Port
Dual USB port COM1 port (RS232/422/485 selectable)
Audio
Parallel port
PS/2 Keyboard & Mouse
GbE port & Dual USB port

PCI Express x16 expansion slot


PCI Express x1 expansion slot
PCI Express x4 expansion slot

RS232 selectable COM port LGA 775 socket


Four PCI expansion slots Intel® Q965

Dual USB port


PS/2 Keyboard & Mouse
Intel® ICH8DO
GbE
Dual RS232/Powered selectable COM port Parallel port
Five SATA 300 ports Four 240-pin
Ten programmable GPIO ports DDR2 DIMM
CompactFlash socket sockets
Front panel I/O
COM1 port USB x2 Audio
ATX V2.2 24-pin power connector VGA port
IDE connector
Four USB ports FDD port
Rear I/O

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4,
 Industrial mainboard in ATX form factor supports Celeron® D processor in LGA-775 package
all Intel® mainstream desktop processors - CoreTM FSB: 1066/800/533MHz
2 Quad, CoreTM 2 Duo, Pentium® D, Pentium® 4, Chipset/Core Logic Intel® Q965 and ICH8DO
Celeron® D processor in LGA-775 package
System Memory Up to 8GB DDR2 800/667/533 SDRAM on four 240-pin DIMM sockets
 Benefits such as Hyper-Threading, EM64T, dual- Award BIOS
BIOS
core, EIST, XD & VT of processor can be easily
applied to system by changing processor Storage Devices EIDE: Support single EIDE device with Ultra DMA 100/66/33
SATA: Support five SATA 300 drives
 Embedded Intel 4th generation graphics engine Solid State Disk One Type II CF socket (only available if no IDE device attached)
provides better user experience of display
Watchdog Timer Programmable via software from 1 sec. to 255 min.
performance
Expansion Interface - Four 32-bit PCI expansion slots
 One PCI Express x16 slot features high-end - One PCI Express x4 slot for x1 or x4 card
graphics card connection interface or dual - One PCI Express x1 slot
- One PCI Express x16 slot for PCIe x16 or PCIe x1 or ADD2/+ card
independent display with ADD2+ media card that
provides TV tuner, video capture in and DVI, TV- Hardware Monitoring System monitor (fan, temperature, voltage)
out Power Requirement Typical: [email protected]; [email protected]; 3.3V@3A

 One PCI Express x4 slot for storage add-in card Dimension Dimension : 304.8(L) x 243.8(W) mm; 12"(L) x 9.6" (W)
which provides reliable and safer data storage with Environment Operating Temperature: 0 to 55oC
adequate I/O throughput Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
 One PCI Express x1 and four 32-bit PCI expansion
MTBF 73,803 hrs
slots for most industrial I/O cards

 Five SATA 300 ports together with one IDE


channel and CF socket are perfect combination I/O
to storage interface for all kinds of applications; MIO Four serial (RS232/TTL selectable x1, RS232/Powered selectable x2, RS232/
supports Intel® Matrix Storage Technology 422/485 selectable x1), one at rear I/O panel, one parallel, one FDD channel

IrDA IrDA 1.0

Ethernet - Single 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82566DM)


- PCI Express x1 interface based Gigabit Ethernet
ORDERING GUIDE - Single RJ-45 connector with two LED indicators at rear I/O panel

Audio HDA interface, 2-channel Audio


Standard RUBY-9716VGAR
USB Eight USB 2.0 ports (Four ports at rear I/O panel; four ports internal)
LGA-775 CoreTM 2 Quad processor based ATX Industrial
Mainboard with DDR2 SDRAM, VGA, Gigabit Ethernet, Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel
Audio and USB

DISPLAY
Graphic Controller - GMCH integrated Intel® 4th generation Extreme Graphics controller
- Intel® GMA 3000 which provides improved 3D multimedia capabilities
including DirectX9, Shader Model 3.0, OpenGL 1.5, Advanced De-interlacing,
MPEG-2 hardware acceleration
- Support dual independent display with ADD2/+ card

41 IMB-RUBY-9716VGAR
Intel® CoreTM 2 Duo processor based ATX

RUBY-9715VG2AR Industrial Mainboard with DDR2 SDRAM,


VGA, Dual Gigabit Ethernet, Audio and USB

Dual GbE port & four USB ports


Parallel port
PCI-E x16 expansion slot
VGA port COM1 port (RS-232/422/485 selectable)
Audio

PS/2 Keyboard & Mouse

COM2 port

Six PCI slots expansion

LGA 775 socket


Front panel header

Intel® 945G PS/2 Keyboard & Mouse


Dual GbE port
Parallel port
Four USB ports
Four 240-pin
DDR2 DIMM
Four SATA 300 ports sockets
COM1 port Four USB ports
8-port GPIO
VGA port Audio
Intel® ICH7R IDE connector Rear I/O
FDD port
EPS12V 24-pin power connector

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Duo, Pentium® D, Pentium® 4, Celeron® D
 Industrial mainboard in ATX form factor processor in LGA-775 package
supports Intel® Pentium® 4 processor with FSB: 1066/800/533MHz
Hyper-Threading technology, CoreTM 2 Duo, Chipset/Core Logic Intel® 945G & ICH7R
Pentium® D and Celeron® D processor in Up to 4GB DDR2 667/533 SDRAM on four 240-pin DIMM sockets
System Memory
LGA-775 package up to 1066MHz front side
bus BIOS Award BIOS

 Support DDR2 667/533 SDRAM up to 4GB in Storage Devices EIDE: Support two EIDE devices with Ultra DMA 100/66/33
SATA: Support four SATA 300 drives
dual channel architecture
Solid State Disk N/A
 Intel® new GMCH integrated graphics engine
Watchdog Timer Programmable via software from 1 sec. to 255 min.
increases 9% ~ 25% performance of GMA
900 of Intel 915GV Expansion Interface - Six 32-bit PCI expansion slots
- One PCI Express x16 slot for graphics card, ADD2/+ card or PCI Express x1
 One PCI Express x16 slot features high-end (general purpose) card
graphics card connection interface or dual - Up to four PCI Express x1 external interface per (project spec.)
independent displays with ADD2+ media card Hardware Monitoring System monitor (fan, temperature, voltage)
that provides TV tuner, video capture in and Typical: [email protected] ; [email protected]
Power Requirement
DVI, TV-out
Dimension Dimension : 312.8(L) x 243.8(W) mm; 12.3"(L) x 9.6" (W)
 Six 32-bit PCI expansion slots for most
Environment Operating Temperature: 0 to 55oC
industrial I/O cards Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
 Dual Gigabit Ethernet ports based on PCI
Express x1 interface without sharing bandwidth MTBF 105,889 hrs
of PCI expansion bus
 Four ports for SATA RAID controller providing I/O
benefits of Intel Matrix Storage Technology MIO Two serial (RS232 x1, selectable RS232/422/485 x1) ports, one at rear I/O
RAID 0, 1, 5, 10 panel, one parallel, one FDD channel

IrDA IrDA 1.0

Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82573L x2)


- PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connectors with two LED indicators at rear I/O panel

Audio AC'97 2.2 Audio

USB Eight USB 2.0 ports (Four ports at rear I/O panel; four ports internal)
ORDERING GUIDE
Keyboard & Mouse Dual 6-pin mini-DIN connectors at rear I/O panel for PS/2 keyboard/mouse

Standard RUBY-9715VG2AR
Intel® CoreTM 2 Duo processor based ATX Industrial
Mainboard with DDR2 SDRAM, VGA, Dual Gigabit
DISPLAY
Ethernet, Audio and USB Graphic Controller GMCH integrated Intel® Graphics Media Accelarator 950 (Intel® GMA 950)

Graphic Memory Dynamic system memory sharing up to 224MB (Intel® DVMT 3.0) or static
system memory sharing up to 128MB

Display Interface Display resolution up to 2048 x 1536

IMB-RUBY-9715VG2AR 42
Intel® CoreTM 2 Duo processor based
Micro-ATX Industrial Mainboard with

RUBY-9713VG2AR DDR2 SO-DIMM, VGA, Dual Gigabit


Ethernet, Audio and USB

Dual GbE & four USB ports Dual COM port

Audio PS/2 K/B & Mouse

VGA port

PCI slot Two 200-pin DDR2 SO-DIMM sockets


PCI-Ex4 slot
PCI-Ex16 slot

FCPGA 478

Intel® 945GME
PS/2 K/B & Mouse
Dual GbE port
LVDS connector VGA port
Intel® ICH7R
Parallel port
IDE connector
FDD port
Dual COM port Four USB ports
8-port GPIO Audio
Four USB ports
Four SATA 300 ports Rear I/O

FEATURES GENERAL
Processor CPU & Package: Intel® CoreTM 2 Duo, CoreTM Duo, CoreTM Solo processor
 Industrial mainboard in uATX form factor supports FSB: 667/533MHz
all Intel® CoreTM 2 Duo, CoreTM Duo, CoreTM Solo Chipset/Core Logic Intel® 945GME and ICH7R
processor for MoDT (Mobile on Desktop)
System Memory Up to 4GB DDR2 667/533 SDRAM on two 200pin SODIMM sockets
application
BIOS Award BIOS
 One 32-bit PCI expansion slot or supports up to
four PCI slots by riser card Storage Devices EIDE: Support two EIDE devices with Ultra DMA 100/66/33
SATA: Support four SATA 300 drives
 One PCI-Express x4 slot or supports up to four RAID: RAID 0/1/5/10
PCI Express x1 slot by riser card Solid State Disk N/A

 Support GPIO and LVDS on board Watchdog Timer Programmable via software from 1 sec. to 255 min.

Expansion Interface - One 32-bit PCI expansion slot or support up to four PCI slots by riser card
 Adopts Intel Matrix Storage Technology to support - One PCI-Express x4 slot or support up to four PCI Express x1 slot by riser
RAID 0/1/5/10 card
- One PCI-Express x16 slot
 Dual Gigabit Ethernet ports based on PCI Express
Hardware Monitoring System monitor (fan, temperature, voltage)
x1 interface without sharing bandwidth of PCI
expansion bus Power Requirement Standby [email protected]; +12V(CPU)@3A, +12V(System)@1A,
+5V(System)@2.5A, +3.3V(System)@1.5A

Dimension Dimension : 243.8(L) x 243.8(W) mm; 9.6"(L) x 9.6" (W)

Environment Operating Temperature: 0 to 55oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF 86,705 hrs


ORDERING GUIDE
Standard RUBY-9713VG2AR
Intel® CoreTM 2 Duo processor based Micro-ATX,
I/O
Industrial Mainboard with DDR2 SODIMM, VGA, Dual MIO Two serial (RS232 x1, selectable RS232/422/485 x1)
Gigabit Ethernet, Audio and USB One parallel, one FDD channel, eight GPIO

IrDA IrDA 1.0


Optional PEP-541L
PCI-E x4 to PCI-E x4 riser card Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Intel® 82573L x2)
PEP-544L - PCI Express x1 interface based Gigabit Ethernet
PCI-E x4 to four PCI-E x1 riser card - Dual RJ-45 connectors with two LED indicators at rear I/O panel
PEP-554L AC'97 2.2 Audio
PCI to four PCI slots riser card
Audio
PEP-553L USB Eight USB 2.0 ports (Four ports at rear I/O panel; four ports internal)
PCI to three PCI slots riser card
Keyboard & Mouse Dual 6-pin mini-DIN connector at rear I/O panel for PS/2 keyboard/mouse
B9970540
Pentium® M 1U Active Heat Sink
DISPLAY
Graphic Controller GMCH integrated Intel® Graphics Media Accelerator 950 (Intel® GMA 950)

Graphic Memory Dynamic share system memory up to 224MB (Intel DVMT 3.0) or static share
system memory up to 128MB

Display Interface Display resolution up to 2048x1536; LVDS

43 IMB-RUBY-9713VG2AR
Intel® Pentium® M or Celeron®
M processor based Micro-ATX
RUBY-7720VG2A Motherboard with DDR2 SDRAM, VGA,
Dual Gigabit Ethernet, Audio and USB

Dual GbE & four USB ports


Audio VGA port
Dual RS232 RI/5V/12V selectable
PS/2 Keyboard & Mouse

PCI Express x1 slot


Two PCI slots

PCI Express x16 slot LVDS


Intel® 915GME

Four USB ports PS/2 K/B & Mouse


Two 240-pin Gigabit Ethernet

Eight GPIO ports DDR2 DIMM sockets


mPGA479M socket
One RS232 RI/5V/12V selectable
CF socket Intel® ICH6M
RS232/422/485 RI/5V/12V selectable USB
COM
FDD port VGA port Audio
ATX 20-pin power
Parallel port connector Rear I/O
IDE port Two SATA ports

FEATURES GENERAL
Processor CPU & Package: Intel® mPGA479M socket support uFC-PGA Pentium® M or
 Industrial mainboard in Micro-ATX form factor Celeron® M up to 2.0GHz
with 915GME chipset that supports Intel® FSB: 533/400MHz
Pentium® M and Celeron® M processor up to Chipset/Core Logic Intel® 915GME and ICH6M
2.0GHz Up to 2GB DDR2-400/533 memory on two 240-pin DIMM sockets with dual
System Memory
channel mode
 Maximum 2GB DDR2-533 system memory
BIOS Award BIOS
 Onboard dual display: VGA and LVDS, 3rd
display via PCI-E x16 Graphic card Storage Devices - Two SATA ports
- One IDE port
 One PCI-Express x16 slot for high-end graphics Solid State Disk One Type I/II Compact Flash socket
card or ADD2 card
Watchdog Timer Programmable via software from 1 sec. to 255 min.
 Dual Gigabit Ethernet ports based on PCI- Expansion Interface - Two 32-bit PCI expansion slots (supports one riser card)
Express x1 interface - One PCI-Express x1 slot
- One PCI-Express x16 slot
 Two 32-bit PCI expansion slots with riser card
Hardware Monitoring System monitor (fan, temperature, voltage)
supported
Power Requirement TBD
 Fanless cooler for Intel® ULV processor
Dimension Dimension : 243.8(L) x 243.8(W) mm; 9.6"(L) x 9.6" (W)

Environment Operating Temperature: 0 to 55oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

MTBF TBD

I/O
MIO Four serial ports (two RS232 (RI/5V/12V) selectable at Rear IO,
one RS232 & one RS232/422/485 (RI/5V/12V) selectable internally

IrDA One IrDA

ORDERING GUIDE Ethernet - Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet (Realtek 8111B-GR x2)


- PCI Express x1 interface based Gigabit Ethernet
- Two RJ-45 connector with two LED indicators at rear I/O panel
Standard RUBY-7720VG2A
Intel® Pentium M or Celeron M processor based Micro- Audio HD Audio interface, 2-channel Audio
ATX Motherboard with DDR2 SDRAM, VGA, Dual
USB Eight USB 2.0 ports (Four ports at rear I/O panel; four ports internal)
Gigabit Ethernet, Audio and USB
Keyboard & Mouse PS/2 keyboard/mouse at rear I/O panel

DISPLAY
Graphic Controller - Intel® 915GME integrated GMA 900
- One VGA (rear panel) and one LVDS (onboard)
- Dual independent display by VGA and LVDS, 3rd display via PCIE x16
Graphic Card

IMB-RUBY-7720VG2A 44
About Chassis

FLEXIBLE AND UNIQUE


At Portwell, we take care of our customers’ needs. Portwell is pledged to remain customer centric -- even amid the relative
challenges of the rack-mount chassis market,. Unlike most chassis suppliers, whose focus is cost-down, our priority is
quality, and this is reflected in the concepts of our newly developed chassis designs.

1. NEW INDUSTRIAL DESIGN (ID)


Our new industrial design is definitely an eye-catcher, and the chassis has pleasing lines that make it easy to work with. We
have invested heavily in our industrial design. Consequently, our rack-mount chassis is not just attractive, but is also built
practically, so that it enhances the product outlook and strengthens the unity of our customers’ systems.

2. ADVANCED FUNCTIONALITY INSIDE


Since they first evolved from the PC, the growing new technologies have changed the applications of the rack-mount
chassis tremendously. New devices, such as USB and IEEE1394, have been completely adopted in the market. The
advanced functionality inside of a Portwell chassis is consistently updated in order to meet changing trends, and assures
Portwell of our continuing place as a market leader.

3. MODULIZED DESIGN TO ENABLE SYSTEM DIFFERENTIATION AND SUITABILITY FOR


FUTURE DEMANDS
The modularized, state-of-the-art design of our chassis enables Portwell to meet system differentiation and the suitability
for future demands. At Portwell, we understand that our rack-mount chassis are not for use by application controllers alone.
They could also be fault-tolerant systems. Therefore, some hot-swappable devices, such as Mirror or RAID disks, might be
integrated into the system. Portwell keeps an eye on future demands to build the capability inside the chassis to work with
your system now and in the future.

Contact your local Portwell office for more information on the state-of-the-art design of all
new Portwell chassis

-The First Priority for Customers


Advanced PORTWELL engineers custom-make products for customers quickly and efficiently.
Our Expertise:
Ruggedized  Experienced and well-trained design team.
 Integration of Industrial Design(ID), flexibility, and functionality.
Enhanced
 Fast sample offering for customer classification and approval.
Modulized  Collaborative design with customers.
 Fast response to customers’ urgent demands:
Optimized Concept Design (3D): 2 working days
Mechanical Design: 5 working days
Samples Building: 14 working days

An outstanding chassis for all your needs.

45 About Chassis
Chassis Reference Table

AREMO-4196 AREMO-2173P AREMO-3194 PRC-4207

BACKPLANE
TYPE SLOT MODEL ORDERING
INFO Model Name ISA PCI/PCI-X PICMG

4U 14-slot RPC-500NC RPC-500NC-14P4-3501P PBP-14P4 9 4 1

4U ATX M/B RPC-500NC-MX RPC-500NC-MX-D3501P -- -- 7 --

4U 14-slot AREMO-4196 AREMO-4196-14P4-D3501P 9 4 1


PBP-14P4
AREMO-4196-14P4-D3202P 9 4 1

ATX M/B AREMO-4196-MX AREMO-4196-MX-D3501P -- -- 7 --

2U 6-slot AREMO-2173P AREMO-2173P-06V4-D3501P 1 4 1


PBP-06V4
AREMO-2173P-06V4-D3502P -- 4 --

2U uATX M/B AREMO-2173MX AREMO-2173MX-D3501P


-- -- -- --
AREMO-2173MX-3502P

3U ATX M/B AREMO-3194 AREMO-3194-MX-350X -- -- 7 --

4U ATX M/B PRC-4207 PRC-4207-MX -- -- -- --

FS 6-slot AREMO-6163 AREMO-6163-06P4-D3501P PBP-06P4 1 4 1

FS 8-slot AREMO-8164 AREMO-8164-08P4-D3501P PBP-08P4 3 4 1

FS 12-slot AREMO-4184 AREMO-4184-06P3-350X PBP-06P3 4 6 2

AREMO-6182-06P3-350X PBP-06P3 2 3 1
FS 6-slot AREMO-6182
AREMO-6182-06P4-350X PBP-06P4 1 4 1

1U uATX PRS-1174 PRS-1174-MX-270X -- -- 1 --

1U 3-slot RPC-1194 RPC-1194 PBP-03P2X -- 2 1

Chassis Reference Table 46


Chassis Reference Table

AREMO-6163 AREMO-8164 AREMO-4184 AREMO-6182 PRS-1174

PSU Dimension
TYPE SLOT MODEL
(W)x (D)x(H) Page
Model Name Power Range

4U 14-slot RPC-500NC ORION-D3501P


350W ATX, PFC, P4
482(W) x 450(D) x 177(H) mm
ORION-D4201P
19”(W) x 18”(D) x 7”(H)
48-49
420W ATX, PFC, P4
4U ATX M/B RPC-500NC-MX ORION-D3502P

4U ORION-D3501P 350W ATX, PFC, P4


14-slot AREMO-4196
ORION-D3202P 320W ATX, PFC, redundant 482(W) x 481(D) x 177(H) mm 50-52
19”(W) x 19”(D) x 7”(H)
ATX M/B AREMO-4196-MX ORION-D4201P 420W ATX, PFC, P4

2U 6-slot ORION-D3501P 350W ATX, PFC, P4 482(W) x 441.6(D) x 88.4(H) mm


AREMO-2173P 19”(W) x 17.4”(D) x 3.5”(H) 53-54
ORION-D3502P 350W ATX, redundant

2U ORION-D3501P 350W ATX, PFC, P4 482(W) x 441.6(D) x 88.4(H) mm


uATX M/B AREMO-2173MX 19”(W) x 17.4”(D) x 3.5”(H) 55-56
ORION-D3502P 350W ATX, PFC, redundant

3U ATX M/B AREMO-3194 ORION-B3501P 350W ATX, PFC, P4 482(W) x 456(D) x 132(H) mm
19”(W) x 18.0”(D) x 5.25”(H) 57-58

4U ATX M/B PRC-4207 ORION-D4601P 460W ATX, PFC, P4 482(W) x 519(D) x 177(H) mm
19”(W) x 20.4”(D) x 7”(H)
59-60

260(W) x 420.8(D) x 172(H) mm


FS 6-slot AREMO-6163 ORION-D3501P 350W ATX, PFC, P4 61-62
10.24”(W) x 16.56”(D) x 6.77”(H)

ORION-D3501P 350W PFC, ATX, P4 330(W) x 420.8(D) x 17(H) mm


FS 8-slot AREMO-8164 63-64
12.99”(W) x 16.56”(D) x 6.77”(H)

482(W) x 448(D) x 177(H) mm


FS 12-slot AREMO-4184 FSP350-601UA 350W PFC, ATX, P4 65-66
19”(W) x 17.6”(D) x 7”(H)

219(W) x 448(D) x 160(H) mm


FS 6-slot AREMO-6182 FSP350-601UA 350W PFC, ATX, P4 8.6”(W) x 17.6”(D) x 6.3”(H) 67-68

1U 482(W) x 510(D) x 44(H) mm


uATX PRS-1174 PRS-1174-MX-270X 270W ATX PFC, P4 70
19”(W) x 20”(D) x 1.75”(H)

1U 482(W) x 474(D) x 44(H) mm


3-slot PRC-1194 PRC-1194-03P2X-A2501 250W ATX PFC, P4 71
19”(W) x 18.7”(D) x 1.75”(H)

47 Chassis Reference Table


RPC-500NC/L 19” 4U industrial rack-mount chassis

FEATURES GENERAL
Construction Heavy-duty steel with aluminum front panel
 5.25” x3 + 3.5” x2 drive bays for RAID 0, 1, 5 &
Drive Bay External: 5.25” x3, 3.5” FDD x1
CD-ROM Internal: 3.5” HDD x1
 Two ball-bearing cooling fans for better Card Retainer Two locations for one card retainer
ventilation
Air Filter One replaceable filter
 Traditional rack-mount handles Cooling Fan One 12cm and one 8cm ball-bearing cooling fans
 Two card retainer positions Indicator Power on/off x1, HDD x1

 Two USB ports on the control panel Switch Power on/off x1, System reset x1, K/B lock x1

Connector One 5-pin K/B connector on the front panel with a cap
 One PS/2 K/B connector cap included
Standard Color Beige, Black
 One modularized function panel for single
(default) and dual (optional) systems Dimension RPC-500N: 482(W) x 450(D) x 177(H) mm; 19”(W) x 17.7”(D) x 7”(H)
RPC-500L: 482(W) x 515(D) x 177(H) mm; 19”(W) x 20.3”(D) x 7”(H)
 ATX M/B applicable, especially for big-AT sized RPC-500N: Net: 14 kg (30.9 lb); Gross: 15 kg (33.1 lb)
Weight
M/B (RPC-500L) RPC-500L: Net: 17.5 kg (38.6 lb); Gross: 18.5 kg (40.8 lb)

 PS/2 reduncant power supply installable Backplane PBP-14I: 14-slot ISA backplane
PBP-14AC: 14-slot (12xPCI) active PICMG backplane
PBP-14A7: 14-slot (7xPCI) active PICMG backplane
PBP-14P4: 14-slot (4xPCI) PICMG backplane
PBP-13D4: 13-slot dual-system PICMG backplane

ORION-D3501P optional
POWER SUPPLY
Maximum output 350W active PFC

Output Voltage & Current +5V@40A; +12V@18A; +3.3V@30A; [email protected], [email protected], +5Vsb@2A

RPC-500NC/L Input Voltage 90V ~ 264V AC, full range


Except the rack-mount handle, RPC-500N is
Input Frequency 47 ~ 63Hz
the same as RPC-500NC. It’s the best selling
4U rack-mount chassis for CTI, industrial, sci- Input Current 10A@115V, 5V@230V
entific, engineering and server applications.
Efficiency > 68%

MTBF 75,145 hrs


ORDERING GUIDE EMI & Safety Approval UL, cUL, TUV, CE, FCC

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH


 RPC-500NC Storage: -40 ~ 70oC, 10 ~ 90%RH
19” 4U rack-mount chassis for PICMG backplane 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4”
Dimension (WxDxH)
 RPC-500NC-MX
19” 4U rack-mount chassis for ATX M/B

 RPC-500L
ENVIRONMENT
Operating Temperature Range 0 to +55°C
19” 4U rack-mount chassis for PICMG backplane
(Long size) Storage Temperature Range 0 to +70°C

 RPC-500L-MX Relative Humidity 5% to 95%, non-condensing


19” 4U rack-mount chassis for server board Vibration 5~7 Hz: 0.5” double amplitude displacement
7~2000 Hz: 1.5g acceleration

Chassis-RPC-500NC/L 48
RPC-500NC/L 19” 4U industrial rack-mount chassis

FEATURE BENEFITS
 A lockable front door with thumb lock  Good for dust-proof & Running status visible
 One power on/off switch with LED indicator, one reset and one K/B  Avoid accidental reset for better running security
lock switches inside the lockable door
 Front replaceable air filter  For installing dual systems and redundant power supplies more easily
 Two USB ports on the front panel  For easy access
 One PS/2 K/B connector on the front panel  Convenient to connect to the keyboard
 One K/B connector cap  Good for dust-proof for the front accessible K/B connector
 Two ball-bearing cooling fans  Better ventilation to provide the system with higher reliability
 Enhanced drive bracket to hold 3 x 5.25” + 1 x 3.5” (external) and  For integrating varied systems with higher flexibility
1 x 3.5” drives (internal)
 Shock-resistant cushion for the drive bracket  Suitable for installing RAID and CD-ROM drive
 Two adjustable positions for hold-down card retainers  For fixing all the cards more flexibly and tightly
 Changeable modularized back panel for 14-slot ISA/PICMG  Only one minutes to change the back panel
backplane or ATX M/B  Easy to change to different backplanes and keep stock
 Field replaceable power supply bracket for both normal PS/2 power  Only three minutes to change defective power supply
supply and PS/2 type redundant power supply  Only 30 seconds to change the defective PSU module

ENGINEERING DRAWING

Unit: mm

49 Chassis-RPC-500NC/L
The Best Cost-Performance 19” 4U
AREMO-4196 Height Pentium® 4 Processor Based
Rack-mount Computer

FEATURES GENERAL
Construction Heavy-duty steel with aluminum front panel
 Three 5.25” and one external 3.5” HDD drive
Drive Bay External: 5.25” x3, 3.5” HDD x1
bays for RAID 0, 1, 5 & CD-ROM
Card Retainer Three locations for one card retainer
 Two USB ports on the front panel
Air Filter Two replaceable air filter
 Dual 12cm ball-bearing cooling fans for better
Cooling Fan Two 12cm 8cm ball-bearing cooling fans
ventilation
Indicator Power on/off x1, HDD x1
 Two card retainer positions
Switch Power on/off x1, System reset x1
 PS/2 or redundant power supply installable
Speaker One 8 speaker
 ATX M/B applicable, especially for big-ATX
Connector Two USB ports on the front panel
size M/B
Standard Color Silver, Black
 Easily detached and washable air filter
Dimension 482(W) x 481(D) x 177(H) mm; 19”(W) x 18.1”(D) x 7”(H)
 Equipped with fan control card to detect fan Net: 13.5 kg (29.8 lb); Gross: 14.5 kg (32 lb)
Weight
failure
Backplane PBP-14I: 14-slot ISA backplane
PBP-14AC: 14-slot (12xPCI) active PICMG backplane
PBP-14A7: 14-slot (7xPCI) active PICMG backplane
PBP-14P4: 14-slot (4xPCI) PICMG backplane
PBP-13D4: 13-slot dual-system PICMG backplane

ORION-D4201P optional
POWER SUPPLY
ORDERING GUIDE Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz
 AREMO-4196
Input Current 5A@230V; 10A@115V
19” 4U rack-mount chassis for PICMG version
Efficiency > 70%
 AREMO-4196-MX
19” 4U rack-mount chassis for M/B version Holdup Time 17 ms. at full load @25oC

Over Voltage Protection +5V@7V; [email protected]; [email protected]


 AREMO-4196-MX-4201P
19” 4U rack-mount chassis for ATX motherboard Over Power/Load Protection Output power over to 110%~140%
with active 420W ATX, Active PFC power supply 100,000 hrs
MTBF
 AREMO-4196-00-4201P EMI & Safety Approval UL, TUV
19” 4U rack-mount chassis for PICMG version and
Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH
420w ATX, Active PFC power supply (3-in-2 mobile Storage: -40 ~ 70oC, 10 ~ 90%RH
rack Drive is optional)
Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

Chassis-AREMO-4196 50
The Best Cost-Performance 19” 4U

AREMO-4196 Height Pentium® 4 Processor Based


Rack-mount Computer

FEATURE BENEFITS
 A lockable front door with thumb lock  Good for dust-proof & security
 One power on/off switch and one system reset botton on the  Avoid accidental reset for better running security
front panel behind the lockable door
 Fan control board  Detect fan fail and Alarm
 Front replaceable air filter  For easy cleaning and install
 Equipped two USB ports  Efficient Access
 Dual 12cm ball-bearing cooling fans  Better ventilation to provide the system with higher reliability
 Enhanced drive bracket to hold three 5.25” and two 3.5” HDD  For integrating varied systems with higher flexibility
drives (internal)  Suitable for installing RAID and CD-ROM drive
 Shock-resistant cushion for the drive bracket  Suitable for harsh industrial environment
 Two adjustable positions for hold-down card retainers  For fixing all the cards more flexibly and tightly
 Changeable modularized back panel for 14-slot ISA/PICMG  Only one minute to change the back panel
backplane or ATX motherboard  Easy to change to different backplanes and keep stock
 Field replaceable power supply bracket for both normal PS/2 power  Only three minutes to change the defective power supply
supply and PS/2 type redundant power supply  Only thirty seconds to change the defective PSU module

WHAT’S NEW

PCI based RAID kits, supporting up to three SATA Friendly design of handles, you can lift and Power switch, RESET switch, HDD / Power
HDDs with RAID 0, 1, 5 selections. The Disk bus is unstall AREMO-4196 comfortably and easily. / Fan-fail / LAN LEDs and two USB 2.0 ports
E-IDE with Ultra DMA support. The RAID kits provide are on the front panel.
a GUI manager for installation and maintenance. Hot-
swap and hot-spare capabilities are also supported.

Flexible design to install power supply, the AREMO-4196 enhances the drive bracket to Equipped with dual 12cm ball bearing fans,
bracket can be adapt to PS/2 type or mini- integrate up to three 5.25” and one 3.5” disk drives AREMO-4196 provides the best ventilation up
redundant power supply. within a limited space. (extra two 3.5” HDD drives to 208CFM to expire heat from the system.
for AREMO-4196-MX)

AREMO-4196 adopts the newly designed AREMO-4196 is equipped with two USB 2.0 The washable fan filter can be easily taken
card retainer to hold both the PCI and ISA connectors on the front panel to have a better off to make an easier maintenance.
type add-on-cards more tightly. security control.

LED indicators include power, HDD, Fan-fail The thumb lock offers easy operation. Users The washable fan filter can be easily taken
and LAN functions. can choose to lock it or not. out for easier maintenance.

51 Chassis-AREMO-4196
The Best Cost-Performance 19” 4U
AREMO-4196 Height Pentium® 4 Processor Based
Rack-mount Computer

AREMO-4196 AREMO-4196-MX

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-4196 52
AREMO-2173P 19” 2U industrial rack-mount chassis
for PICMG backplane

FEATURES GENERAL
Construction Heavy-duty steel
 One slim CD-ROM and two hot-swap 3.5”
HDD (SATA) Drive bays Drive Bay External: Slim type CD-ROM x1, Hot-swap 3.5” HDD x2

 Two USB ports on the front panel Air Filter One external replaceable air filter

Cooling Fan Two 7cm ball-bearing fans


 Two 7cm ball-bearing cooling fans for
better ventilation Indicator HDD x1+ Power on/off x1

 One power On/Off switch with protection cap Switch Power on/off (with a protection cap) x1, System reset x1
and one touch free reset for secure access Speaker One 8 speaker

Connector Two USB ports equipped on the front panel

Standard Color Silver, Black

Dimension 482(W) x 441.6(D) x 88.4(H) mm; 19”(W) x 17.4”(D) x 3.5”(H)

Weight Net: 11.0 kg (23.1 lb); Gross: 12.0 kg (25.3 lb)

ORDERING GUIDE ORION-D3501P optional


POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range
 AREMO-2173P-06V4-D3501P
19” 2U rack-mount chassis with vertical 6-slot (4x Input Frequency 47 ~ 63 Hz
PCI) PICMG backplane and 350W ATX, active Input Current 6A@90V
PFC power supply
Efficiency > 68%
 AREMO-2173P-06V4 17 ms. at full load@25oC
Holdup Time
19” 2U rack-mount chassis with vertical 6-slot (4x
PCI) PICMG backplane Over Voltage Protection +5V@7V; [email protected]; [email protected]

Over Power/Load Protection Output power over 110%~140%


 AREMO-2173P-06V4-3502P
MTBF 75,145 hrs
19” 2U rack-mount chassis with vertical 6-slot (4x
PCI) PICMG backplane and 350W active PFC EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
redundant power supply
Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH
Storage: -20 ~ 70oC, 10 ~ 90%RH

Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

53 Chassis-AREMO-2173P
AREMO-2173P 19” 2U industrial rack-mount chassis
for PICMG backplane

FEATURE BENEFITS
 350W Active PFC power supply  Sufficient power source for Intel® Pentium® 4 processor
 Two 7cm high speed fans  Better ventilation to enhance system reliability
 Two swappable SATA HDD drive bays  Easy to access HDD drives
 Four Low profile PCI expansion slots  For system function expansion

 Front replaceable air filters  Easy cleaning

WHAT’S NEW

Thumb Lock Two Swappable SATA HDD Drives Front Replaceable Air Filters/Fans
Convenient to operate or protect the system Easy to access HDD drives Convenient to change air filters or fans when
needed

Rear View

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-2173P 54
19” 2U industrial rack-mount

AREMO-2173MX chassis for Micro-ATX or mini-


ITX mother board

FEATURES GENERAL
Construction Heavy-duty steel
 One slim CD-ROM and two hot-swap 3.5”
HDD (SATA) Drive bays Drive Bay External: Slim type CD-ROM x1, Hot-swap 3.5” HDD x2

 Two USB ports on the front panel Air Filter One external replaceable air filter

Cooling Fan Two 7cm ball-bearing fans


 Two 7cm ball-bearing cooling fans for
better ventilation Indicator HDD x1+ Power on/off x1

 One power On/Off switch with protection cap Switch Power on/off (with a protection cap) x1, System reset x1
and one touch free reset for secure access Speaker One 8 speaker

Connector Two USB ports equipped on the front panel

Standard Color Silver, Black

Dimension 482(W) x 441.6(D) x 88.4(H) mm; 19”(W) x 17.4”(D) x 3.5”(H)

Weight Net: 11.0 kg (23.1 lb); Gross: 12.0 kg (25.3 lb)

ORDERING GUIDE ORION-D3501P optional


POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range
 AREMO-2173MX-D3501P
19” 2U rack-mount chassis for micro-ATX or mini- Input Frequency 47 ~ 63 Hz
ITX M/B with 350W ATX, active PFC power Input Current 6A@90V
supply
Efficiency > 68%
 AREMO-2173MX 17 ms. at full load@25oC
Holdup Time
19” 2U rack-mount chassis for micro-ATX or mini-
ITX M/B Over Voltage Protection +5V@7V; [email protected]; [email protected]

Over Power/Load Protection Output power over 110%~140%

MTBF 75,145 hrs

EMI & Safety Approval UL, TUV

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH


Storage: -40 ~ 70oC, 10 ~ 90%RH

Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

55 Chassis-AREMO-2173MX
AREMO-2173MX
FEATURE BENEFITS
 350W Active PFC power supply  Sufficient power source for Intel® Pentium® 4 processor
 Two 7cm high speed fans  Better ventilation to enhance system reliability
 Two swappable SATA HDD drive bays  Easy to access HDD drives
 Four Low profile PCI expansion slots  For system function expansion

 Front replaceable air filters  Easy cleaning

WHAT’S NEW

Thumb Lock Two Swappable SATA HDD Drives Front Replaceable Air Filters/Fans
Convenient to operate or protect the system Easy to access HDD drives Convenient to change air filters or fans when
needed

Rear View

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-2173MX 56
AREMO-3194 19” 3U rack-mount chassis for
ATX M/B platform

FEATURES GENERAL
Construction Heavy-duty steel
 IEEE 1394 port and two USB ports on the
front panel Drive Bay External: 5.25”x2+3.5”x1; Internal: 3.5”x1

 Dedicated cooling fans for expiring the heat Air Filter Two replaceable air filters at the front
on the hot spots within the chassis Cooling Fan Two 8 cm ball-bearing cooling fans

 Dustproof front-access air filter for easy Indicator Power on/off x1, HDD x1
cleaning and replacing Switch Power on/off x1, System reset x1

 Lockable front door provides greater security Speaker One 8 speaker

 Thumb lock for greater security and to operate Connector Two USB ports and 1 IEEE 1394 port on the front panel
system more easily Standard Color Silver, Black

Dimension 481.6(W) x 487.8(D) x 132.7(H) mm ; 19”(W) x 19.2”(D) x 5.22”(H)

Weight Net: 16 kg (35.3 lb) ; Gross: 18 kg (39.7 lb)

M/B Micro-ATX, ATX


ORDERING GUIDE
 AREMO-3194-MX-B3501P ORION-B3501P optional
POWER SUPPLY
19” 3U rack-mount chassis with 2U 350W ATX,
Input Voltage 90V ~ 264V AC, full range
W/active PFC power supply for ATX M/B
Input Frequency 47 ~ 63 Hz
 AREMO-3194E-MX-D3501P Input Current 10A@115V, 6A@230V
19” 3U rack-mount chassis with PS/2 350W ATX, > 65%
Efficiency
with active PFC power supply for ATX M/B
Holdup Time 16 ms. at full load

Over Voltage Protection [email protected]~7.0V; [email protected]~4.5V; [email protected]~14.6V

Over Power/Load Protection Output power over 110%~150%

MTBF 100,000 hrs

EMI & Safety Approval UL, cUL, TUV, CE, FCC

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH


Storage: -20 ~ 60oC, 5 ~ 95%RH

Dimension (WxDxH) 100x200x70 mm; 3.94”x8.3”x2.8”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

57 Chassis-AREMO-3194
AREMO-3194 19” 3U rack-mount chassis for
ATX M/B platform

FEATURE BENEFITS
 Two USB and one IEEE 1394 ports on the front panel  Sufficient power source for Intel® Pentium® 4 processor
 Cooling tunnel design  Better ventilation to enhance system reliability
 More expansion slots  Support up to six expansion and one AGP slots for higher expansibility
 Thumb lock  Easy to operate the system
 Lockable front door  Provide better security
 Front replaceable air filters  For easy cleaning

WHAT’S NEW

Excellent In-System Cooling PCI and AGP Expansion Front Replaceable Air Filters
Two 8cm ball-bearing fans provide better Six PCI and one AGP expansion slots for Convenient to change air filters
ventilation and keep smooth airflow adding more functions to the system when needed

Lockable Front Door and Protection Cap and Touch-Free Excellent Cooling System
Thumb Lock Reset Switch New slot cover and air holes for
Provide better security and operate the Avoid abnormal operation and increase better ventilation
system more easily system reliability

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-3194 58
PRC-4207 19” 4U industrial rack-mount chassis
for server grade mother board

FEATURES GENERAL
Construction Heavy-duty steel
 5.25” x3 + 3.5” x4 drive bays for RAID 0, 1, 5 &
CD-ROM Drive Bay External: 5.25” x3
Internal: 3.5” HDD x4
 Two ball-bearing cooling fans for better
ventilation Card Retainer Two locations for one card retainer

Air Filter One replaceable air filter


 Traditional rack-mount handles
Cooling Fan One 12cm and one 8cm ball-bearing cooling fans
 Two card retainer positions
Indicator Power on/off x1, HDD x1
 Two USB ports on front panel
Switch Power on/off x1, System reset x1, K/B lock x1
 ATX M/B applicable, especially for server Two USB ports on the front panel
Connector
grade M/B
Standard Color Beige, Black
 PS/2 reduncant power supply installable 482(W) x 519(D) x 177(H) mm; 19”(W) x 20.4”(D) x 7”(H)
Dimension
Weight Net: 14 kg (30.9 lb); Gross: 15 kg (33.1 lb)

Backplane PBP-14I: 14-slot ISA backplane


PBP-14AC: 14-slot (12xPCI) active PICMG backplane
PBP-14A7: 14-slot (7xPCI) active PICMG backplane
ORDERING GUIDE PBP-14P4: 14-slot (4xPCI) PICMG backplane
PBP-13D4: 13-slot dual-system PICMG backplane

 PRC-4207
19” 4U rack-mount chassis for PICMG backplane ORION-D4601P optional
POWER SUPPLY
 PRC-4207-MX Maximum output 460W
19” 4U rack-mount chassis for ATX M/B
Output Voltage & Current +5V@20A; +12V@32A; +3.3V@22A, [email protected], [email protected]

Input Voltage 90V ~ 264V AC selectable

Input Frequency 47 ~ 63Hz

Input Current 6A@115V, 3V@230V

Efficiency > 70%

MTBF 100,000 hrs at 25oC

EMI & Safety Approval UL, TUV, CE, FCC

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH


Storage: -40 ~ 60oC, 5 ~ 95%RH

Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +70°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

59 Chassis-PRC-4207
PRC-4207 19” 4U industrial rack-mount chassis
for server grade motherboard

FEATURE BENEFITS
 A lockable front door with acrylic windows  Good for dust-proof & Running status visible
 One power on/off switch with LED indicator, one reset and one K/B  Avoid accidental reset for better running security
lock switches inside the lockable door
 Front replaceable air filter  For installing dual systems and redundant power supplies more easily
 Two USB ports on the front panel  For easy access
 Two ball-bearing cooling fans  Better ventilation to provide the system with higher reliability
 Enhanced drive bracket to hold 3 x 5.25” + 4 x 3.5” drives (internal)  For integrating varied systems with higher flexibility
 Shock-resistant cushion for the drive bracket  Suitable for installing RAID and CD-ROM drive
 Two adjustable positions for hold-down card retainers  For fixing all the cards more flexibly and tightly
 Changeable modularized back panel for 14-slot ISA/PICMG  Only one minutes to change the back panel
backplane or ATX M/B  Easy to change to different backplanes and keep stock
 Field replaceable power supply bracket for both normal PS/2 power  Only three minutes to change the defective power supply
supply and PS/2 type redundant power supply  Only 30 seconds to change the defective PSU module

ENGINEERING DRAWING

426.50 173.70
88

19.35
74.65
39.15
514.90
519.31
514.40

52.85

26.45
66.55
92

176.82
3.30
R 3.55
102.40

177

10.40
37.30

Unit: mm
465
482

Chassis-PRC-4207 60
AREMO-6163 6-slot full-size industrial node chassis
(Shoe-box)

FEATURES GENERAL
Construction Heavy-duty steel
 One external 5.25” and two internal 3.5” HDD
drive bays Drive Bay External: 5.25” x1
Internal: 3.5” HDD x2
 Two USB ports on the front panel
Card Retainer Two locations for one card retainer
 Can be vertically or horizontally mounted,
Air Filter One replaceable air filter at the front door
easy to fit into space limited environment
Cooling Fan One 12cm ball-bearing fan
 One 12cm ball-bearing cooling fan for
better ventilation Indicator Power on/off x1, HDD x1

Switch Power on/off x1, System reset x1


 One replaceable air filter for easy cleaning
Speaker One 8 speaker
 Two adjustable positions for hold-down card
retainers provide better protection from Connector Two USB ports on the front panel
vibration Standard Color Silver, Black

 Wall-mounting bracket equipped Dimension 260(W) x 420.8(D) x 172(H) mm; 10.24”(W) x 16.56”(D) x 6.77”(H)

 Both 6-slot ISA and PICMG 1.0 or 1.3 Weight Net: 8.5 kg (18.7 lb); Gross: 9.5 kg (20.9 lb)
backplane applicable; easy to change Backplane PBP-06I: 6-slot PISA bus PICMG backplane
different backplanes PBP-06P4: 6-slot (4xPCI) PICMG backplane
PBP-06P3: 6-slot (3xPCI) PICMG backplane
 Field replaceable power supply bracket for
both normal PS/2 and PS/2 redundant
power supply, easy for changing defected ORION-D3501P optional
POWER SUPPLY
power supply
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 6A@90V

ORDERING GUIDE Efficiency > 68%

Holdup Time 17 ms. at full load @25oC


 AREMO-6163-06P3-D3501P Over Voltage Protection +5V@ 7V; +3.3V@ 4.3V; +12V@ 15.6V
6-slot full-size industrial node chassis with
Over Power/Load Protection Output power over to 110%~140%
6-slot (3xPCI) PICMG backplane and 350W
active PFC ATX power supply MTBF 75,145 hrs

 AREMO-6163-06P4-D3501P EMI & Safety Approval UL, TUV


6-slot full-size industrial node chassis with Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH
6-slot (4xPCI) PICMG backplane and 350W Storage: -40 ~ 70oC, 10 ~ 90%RH
active PFC ATX power supply
Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

61 Chassis-AREMO-6163
AREMO-6163 6-slot full-size industrial node chassis
(Shoe-box)

FEATURE BENEFITS
 5.25” drive space for CD-ROM or mobile rack  Easy to install software
 Two USB ports at the front  Easy to operate the system
 One replaceable air filter  Easy cleaning
 Two USB ports equipped
 Can be vertically or horizontally mounted  Easy to fit into different space limited environments
 Two adjustable positions for hold-down card retainer  For fixing all the cards more flexibly and tightly
 Both 6-slot ISA and PICMG backplane applicable  Easy to change to different backplane and keep in stock
 Field replaceable power supply bracket for both normal PS/2  Easy maintenance
power supply and PS/2 type redundant power supply

WHAT’S NEW

Two Adjustable Card Retainer Positions Plastic Fan Filter New HDD Drive Design
For fixing all the cards more flexibly and tightly For easy cleaning and replace Easy to install HDD drives

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-6163 62
AREMO-8164 8-slot full-size industrial node chassis
(Shoe-box)

FEATURES GENERAL
Construction Heavy-duty steel
 Two 5.25” and two internal 3.5” HDD drive
bays for CD-ROM or mobile rack, easy to Drive Bay External: 5.25” x2
install software and mirror disk (RAID1) Internal: 3.5” HDD x2

 Two USB ports on the front panel Card Retainer Two locations for one card retainer

Air Filter One replaceable air filter at the front door


 Can be vertically or horizontally mounted,
easy to fit into space limited environment Cooling Fan One 12cm ball-bearing fan

 One 12cm ball-bearing cooling fan for Indicator Power on/off x1, HDD x1
better ventilation Switch Power on/off x1, System reset x1

 One replaceable air filter for easy cleaning Speaker One 8 speaker

 Two adjustable positions for hold-down Connector 2 USB ports on the front panel
card retainers provide better protection Standard Color Silver, Black
from vibration
Dimension 330(W) x 420.8(D) x 172(H) mm; 12.99”(W) x 16.56”(D) x 6.77”(H)
 Wall-mounting bracket equipped Weight Net: 10 kg (22.1 lb); Gross: 9.5 kg (20.9 lb)
 Both 8-slot ISA and PICMG 1.0 or 1.3 Backplane PBP-08I: 8-slot ISA backplane
backplane applicable; easy to change PBP-08P4: 8-slot (4xPCI) PICMG backplane
different backplanes PBP-08P3 : 8-slot (3xPCI) PICMG backplane

 Field replaceable power supply bracket for ORION-D3501P optional


both normal PS/2 and PS/2 redundant POWER SUPPLY
power supply, easy for changing defected Input Voltage 90V ~ 264V AC, full range
power supply Input Frequency 47 ~ 63 Hz

Input Current 6A@90V

Efficiency > 68%

ORDERING GUIDE Holdup Time 17 ms. at full load @25oC

Over Voltage Protection +5V@ 7V; +3.3V@ 4.3V; +12V@ 15.6V


 AREMO-8164 Over Power/Load Protection Output power over 110%~140%
8-slot full-size industrial node chassis
MTBF 75,145 hrs
 AREMO-8164-08P4-00 EMI & Safety Approval UL, TUV
8-slot full-size industrial node chassis with
Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH
8-slot (4xPCI) PICMG backplane Storage: -40 ~ 70oC, 10 ~ 90%RH

 AREMO-8164-08P4-D3501P Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”


8-slot full-size industrial node chassis with
8-slot (4xPCI) PICMG backplane and 350W
active PFC ATX power supply ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

63 Chassis-AREMO-8164
AREMO-8164 8-slot full-size industrial node chassis
(Shoe-box)

FEATURE BENEFITS
 5.25” drive bays for CD-ROM or mobile rack  Easy to install software and mirror disk (RAID 1)
 Two USB ports on the front panel  Easy to operate the system
 One replaceable air filter  Easy cleaning
 Can be vertically or horizontally mounted  Easy to fit into different space limited environments
 Two adjustable positions for hold-down card retainer  For fixing all the cards more flexibly and tightly
 Both 8-slot ISA and PICMG backplane applicable  Easy to change to different backplane and keep in stock
 Field replaceable power supply bracket for both normal PS/2  Easy maintenance
power supply and PS/2 type redundant power supply

WHAT’S NEW

Two Adjustable Card Retainer Positions Plastic Fan Filter Excellent Cooling System
For fixing all the cards more flexibly and tightly For easy cleaning and replacing New slot cover for better ventilation

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-8164 64
AREMO-4184 19" 4U Height rack-mount chassis with
dual AREMO-6182 node chassis

AREMO-4184

FEATURES GENERAL
Construction Heavy-duty steel
 Magic design for wall-mount, desk-top and Drive Bay External: 5.25” x1 (each system)
rack-mount application
Internal: 3.5” x1 (each system)
 Ruggedized steel node chassis suitable for Card Retainer Two locations for one card retainer
harsh environment
Air Filter One replaceable air filter at the front door
 One built-in 12cm ball-bearing fan for better Cooling Fan One 12cm ball-bearing fan
ventilation
Indicator Power on/off x1, HDD x1
 Built-in 1U ATX type power supply
Switch Power on/off (with a protection cap) x1, System reset x1
 Support one external 5.25” and one internal Speaker One 8 speaker
3.5” disk drive
Connector 2 USB ports
 Optional one external 5.25” and one internal
Standard Color Black, Silver
3.5” disk drive
Dimension AREMO-4184: 482(W) x 448(D) x 177(H) mm; 19”(W) x 17.6”(D) x 7”(H)
 Optional kit to combine two AREMO-6182 for
Weight AREMO-6182: Net: 6.5 kg (14.3 lb); Gross: 8.0 kg (17.6 lb)
the rack-mount application, AREMO-4184
AREMO-4184: Net: 15.5 kg (34.2 lb); Gross: 17.5 kg (38.6 lb)

Backplane PBP-06P3: 6-slot (3xPCI) PICMG backplane


PBP-06P4: 6-slot (4xPCI) PICMG backplane
PBP-06I: 6-slot (6xISA) PICMG backplane

FSP350-601UA optional
POWER SUPPLY
Input Voltage 90V ~ 135V, 180V ~ 265V AC

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V


AREMO-6182 Efficiency > 65%

Holdup Time 18m Sec

Over Voltage Protection +3.3V: 4.5V; +5V: 6.5V; +12V: 15.6V

ORDERING GUIDE Over Power/Load Protection +3.3V: 45A; +5V: 45A; +12V: 20A

MTBF 100,000 hrs


 AREMO-4184-06P4-350X/B
EMI & Safety Approval UL, CSA, VDE, FCC, CE, NEMKO
Two sets of AREMO-6182 with rack-mount kit,
6-slot (3xPCI) PICMG backplane and 350W Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 80%RH
1U ATX, active PFC power supply Storage: -40 ~ 70°C, 10 ~ 90%RH
Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”
 AREMO-6182-06P4-350X/B
6-slot node chassis with 6-slot (3xPCI) PICMG
backplane and 350W 1U ATX, active PFC power ENVIRONMENT
supply
Operating Temperature Range 0 to +50°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

65 Chassis-AREMO-4184
AREMO-4184 19" 4U Height rack-mount chassis with
dual AREMO-6182 node chassis

FEATURE BENEFITS
 One 5.25” drive bay for EZDRV  For both CD-ROM and FDD support or Hot-swappable HDD
 Front replaceable air filter  Easy cleaning & replacing
 Two adjustable positions for hold-down card retainer  For fixing all the cards more flexibly and tightly
 Both 6-slot ISA and PICMG backplane applicable  Easy to change to different backplane and keep in stock
 350W micro-ATX power supply  Save the space inside the chassis
 Special kit to combine dual systems into 4U space  Can be integrated as a fault tolerant system

WHAT’S NEW

Special Configuration with EZDRV Easy to Mount Two become One


AREMO-6182 adopts EZDRV-300NCF or mobile rack AREMO-6182 can be easily mounted on the Combine two AREMO-6182 as a dual
for 3.5” HDD supporter system 4U chassis

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-4184 66
AREMO-6182 6-slot full-size industrial node chassis
(Shoe-box)

FEATURES GENERAL
Construction Heavy-duty steel
 One external 5.25” and one internal HDD
drive bay Drive Bay External: 5.25” x1
Internal: 3.5” HDD x1
 One replaceable air filter for easy cleaning
Card Retainer Two locations for one card retainer
 Can be vertically or horizontally mounted,
Air Filter One replaceable air filter at the front door
easy to fit into space limited environment
Cooling Fan One 12cm ball-bearing fan
 One 12cm ball-bearing cooling fan for
better ventilation Indicator Power on/off x1, HDD x1

Switch Power on/off x1, System reset x1


 The fan filter panel can be installed in
different directions Speaker One 8 speaker

 Two adjustable positions for hold-down Connector 2 USB ports


card retainers provide better protection Standard Color Black, Silver
from vibration
Dimension 219(W) x 448(D) x 160(H) mm; 8.6”(W) x 17.6”(D) x 6.3”(H)
 Wall-mounting bracket equipped Weight Net: 8.5 kg (18.7 lb); Gross: 9.5 kg (20.9 lb)
 Both 6-slot ISA and PICMG 1.0 or 1.3 Backplane 6-slot PISA bus PICMG backplane
backplane applicable; easy to change
different backplanes
FSP350-601UA optional
POWER SUPPLY
Input Voltage 90V ~ 132V, 180V ~ 265V AC

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 65%

Holdup Time 18m Sec


ORDERING GUIDE
Over Voltage Protection +3.3V: 4.5V; +5V: 6.5V; +12V: 15.6V
 AREMO-6182-06P3-350X Over Power/Load Protection +3.3V: 45A; +5V: 45A; +12V: 20A
6-slot full-size industrial node chassis with MTBF 100,000 hrs
6-slot (3xPCI) PICMG backplane and 1U 350W ATX,
Active PFC power supply EMI & Safety Approval UL, CSA, VDE, FCC, CE, NEMKO

 AREMO-6182-06P4-350X Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 80%RH


Storage: -40 ~ 70°C, 10 ~ 90%RH
6-slot full-size industrial node chassis with
6-slot (4xPCI) PICMG backplane and 350W Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”
active PFC ATX power supply

ENVIRONMENT
Operating Temperature Range 0 to +50°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

67 Chassis-AREMO-6182
AREMO-6182 6-slot full-size industrial node chassis
(Shoe-box)

FEATURE BENEFITS
 5.25” drive bay for CD-ROM or mobile rack  Easy to install software and mirror disk (RAID 1)
 One replaceable air filter  Easy to operate the system
 Can be vertically or horizontally mounted  For easy cleaning
 Two adjustable positions for hold-down card retainer  Easy to fit into different space limited environment
 Both 6-slot ISA and PICMG backplane applicable  For fixing all the cards more flexibly and tightly
 Field replaceable power supply bracket for both normal PS/2  Easy to change to different backplane and keep stock
power supply and PS/2 type redundant power supply
 Field replaceable bracket for both normal PS/2 and redundant power  For ease of maintenance
supply
 Removable fan kit  Easy to replace the broken fan

WHAT’S NEW

Removable Fan Kit Can be Mounted in Different Styles Dual Card Retainers
Easy to replace the fan when broken AREMO-6182 can be either vertically or It has two positions for card clamps to
horizontally installed hold both PCI and ISA cards tightly

ENGINEERING DRAWING

Unit: mm

Chassis-AREMO-6182 68
PNC-5063 6-slot industrial node chassis for half-
size PCI cards

FEATURES GENERAL
Construction Heavy-duty steel
 One NB CD-ROM, one NB FDD and one 3.5”
HDD drive bays Drive Bay External: NB CD-ROM x1 + NB FDD x1 (devices built in)
Internal: 3.5” HDD x1
 Can be vertically or horizontally mounted, easy
to fit into space limited environment Air Filter One replaceable air filter at the front door

Cooling Fan One 12cm ball-bearing fan


 Replaceable air filter for easy cleaning
Indicator HDD x1
 One power on/off switch protection cap and
one touchfree reset for secure access Switch Power on/off (with a protection cap) x1, System reset x1

 Two front accessible USB ports Speaker One 8 speaker

Connector Two USB ports on the front panel


 Wall-mounting bracket equipped
Standard Color Industrial dark gray
 One 12cm ball-bearing cooling fan provides
Dimension 196(W) x 262(D) x 196(H) mm; 7.7”(W) x 10.3”(D) x 7.2”(H)
better ventilation to enhance the system
reliability Weight Net: 6.5 kg (14.3 lb); Gross: 7 kg (15.4 lb)

 Built-in 150W ATX active PFC power supply Backplane PBP-05P: 5-slot PCI backplane

ORION-A1501
POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 4A@115V, 2A@230V

Efficiency > 65%


ORDERING GUIDE
Holdup Time 16 ms. at full load @25oC

 PNC-5063-05P-150X Over Voltage Protection +5V@ 5.6~6.6V; +3.3V@ 3.6~4.2V; +12V@ 13.2~14.6V
6-slot node chassis with 5-slot PCI backplane, Over Power/Load Protection Output power over to 110%~160%
150W ATX active PFC, power supply, 24X NB CD-
ROM and NB FDD MTBF 84,228 hrs

EMI & Safety Approval UL, CSA, TUV, FCC, CE

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 90%RH


Storage: -20 ~ 70oC, 5 ~ 95%RH
Dimension (WxDxH) 150x140x86 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

69 Chassis-PNC-5063
PRS-1174 19" 1U Height rack-mount micro-ATX
based server with four drives

FEATURES GENERAL
Construction Heavy-duty steel
 Four external 3.5” HDD drive bays
Drive Bay Internal: 3.5” HDD x4
 One PCI expansion slot Cooling Fan One 4cm ball-bearing fan

Indicator Power on/off x1, HDD x1


 Three 4cm ball-bearing cooling fans for
better ventilation Switch Power on/off x1, System reset x1

Speaker One 8 speaker


 Adopt standard micro-ATX M/B
Connector Two USB ports on the front panel

 Support Hot-swappable mobile rack Standard Color Silver

Dimension 432(W) x 510(D) x 44(H) mm; 10.24”(W) x 16.56”(D) x 6.77”(H)


 Easy maintenance and installation
Weight Net: 8.5 kg (18.7 lb); Gross: 9.5 kg (20.9 lb)

FSP270-50PLA optional
POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 10A@250V

Efficiency > 68%

Holdup Time 17 ms. at full load @25oC


ORDERING GUIDE Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V

Over Power/Load Protection Output power over to 110%~140%


 PRS-1174-MX-270X
1U barebone RAID server with four drive bays, MTBF 100,000 hrs
270w active PFC power supply
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO,
NEMCO, DIMCO
Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH
Storage: -40 ~ 70oC, 10 ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

Chassis-PRS-1174 70
PRC-1194 19" 1U Height industrial rack-mount P4
chassis

FEATURES GENERAL
Construction Heavy-duty steel
 Single power supply with higher +12V output
for Pentium® 4 processor Drive Bay External: NB CD-ROM x1 (or equivalent CD-RW / DVD-ROM) + NB FDD x1
Internal: 3.5” HDD x2
 Cooling tunnel design for expiring heat
generated by CPU Air Filter N/A

Cooling Fan One 12cm ball-bearing fan


 Power cable routed beneath the cooling tunnel
to avoid disturbance of air path Indicator Power on/off x1, HDD x1

 Two PCI expansion slots for adding more Switch Power on/off x1, System reset x1
functions to system Speaker N/A

Connector Two USB connectors on the front panel, reserved one COM port cutout

Standard Color Black

Dimension 480.4(W) x 474(D) x 44(H) mm; 19”(W) x 18.7”(D) x 1.7”(H)

Weight Net: 10 kg (22.05 lb); Gross: 13 kg (28.67 lb)

Backplane PBP-03P2X: 3-slot (2xPCI) PICMG backplane

ORION-A2501 optional
POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 65%


ORDERING GUIDE
Holdup Time 16 ms. at full load @25oC

 PRC-1194-03P2X-2501 Over Voltage Protection [email protected]~6.5A; [email protected]~4.4V; [email protected]~15.6V


19” 1U rack-mount chassis with 3-slot (2xPCI)
Over Power/Load Protection Output power over to 110%~160%
PICMG backplane and 250W PFC power supply
MTBF 105,405 hrs

EMI & Safety Approval UL, cUL, TVU, CE, FCC

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 85%RH


Storage: -20 ~ 70oC, 10 ~ 90%RH
Dimension (WxDxH) 100x190x40.5 mm; 5.9”x5.5”x3.4”

ENVIRONMENT
Operating Temperature Range 0 to +55°C

Storage Temperature Range -20 to +80°C

Relative Humidity 5% to 95%, non-condensing

Vibration 5~7 Hz: 0.5” double amplitude displacement


7~2000 Hz: 1.5g acceleration

71 Chassis-PRC-1194
5.25" compact drive set with slim type
EZDRV-400 DVD-ROM, SD/CF card reader, 2 USB
ports and space for 2.5" HDD

External: 1xslim type DVD-ROM

SD Reader and 2 USB ports

Internal: 1xNB 2.5” HDD


CF Reader and LED for HDD

FEATURES GENERAL
 All-in-one drive set can hold: Construction Heavy-duty steel with plastic front cover
- one slim type DVD-ROM -External: Slim type DVD-ROM x1 + 2-in-1 reader + USB ports x2
Drive Bay
- SD card reader -Internal: NB 2.5” HDD x1
- CF card reader
Indicator HDD x1
- 2 USB ports
- 2.5” HDD (internal) Standard Color Black

Dimension 149(W) x 185(D) x 43(H) mm; 5.9”(W) x 7.3”(D) x 1.7”(H)


 One LED for internal HDD
Weight Net: 0.9 kg (2 lb); Gross: 1.3 kg (2.9 lb)

ORDERING GUIDE ENVIRONMENT


 EZDRV-400DR Operating Temperature Range 0 to +55°C
5.25” compact drive bracket with slim type DVD-
Storage Temperature Range 0 to +70°C
ROM, SD/CF reader, 2 USB ports and space for
2.5” HDD 5% to 95%, non-condensing
Relative Humidity

 EZDRV-400DRW
5.25” compact drive bracket with slim type DVD-
RW, SD/CF reader, 2 USB ports and space for
2.5” HDD

Chassis-EZDRV-400 72
ESB Reference Table

MODEL PEB-2731VLA PEB-2130 PEB-2131VG2A PEB-2737VLA PEB-2738 PEB-2780 PEB-2770

Form Factor 3.5” Floppy-size 3.5" Embedded 3.5" Embedded 3.5" Embedded 3.5" Embedded 3.5" Embedded 3.5" Embedded

Ultra Low Voltage Intel® Celeron® M Intel® ATOMTM N270 Intel® ATOMTM Z510 Intel® ATOMTM Intel® ATOMTM Intel® ATOMTM
CPU
Intel® Celeron® M / Z530 Z510PT / Z520PT processor N450 processor D510

Chipset 852GM + ICH4 910GMLE + ICH6-M 945GSE + ICH7-M US15W US15WPT


®
Intel ICH8M
®
Intel ICH8M

FSB 400MHz 400MHz 533MHz / 667MHz 400MHz / 533MHz 400MHz / 533MHz 1.6GHz 1.6GHz

Max Memory One SO-DIMM / One SO-DIMM / One SO-DIMM / One SO-DIMM / One SO-DIMM / One SO-DIMM/2GB One SO-DIMM/2GB
1GB 1GB 2GB 2GB 2GB
Memory Chip DDR DDR2 DDR2 DDR2 DDR2 DDR2 DDR2
Type
Display VGA / LVDS / DVO DVI-I / LVDS VGA / LVDS VGA / LVDS SDVO / LVDS VGA/18bit LVDS VGA/18bit LVDS

4 PCI master SDVO (with PCI-E


Expansion expansion via riser x1 + USB) connector
One Mini-PCI One Mini-PCI
Interface card / One Mini-PCI N/A / SDIO / TPM
Express socket Express socket
socket header

LAN
Fast Ethernet x1 GbE x2 GbE x2 GbE x1 GbE x1 Gbe 2 Gbe 2

Serial RS232 x2 RS232 x1, RS232 / RS232 x4 RS232 x1, RS232 / RS232 x1, RS232 / RS232 3 RS232 / RS232 3 RS232 /
422 / 485 x1 422 / 485 x1 422 / 485 x1 422 / 485 422 / 485

USB USB 2.0 x6 USB 2.0 x6 USB 2.0 x7 USB 2.0 x8 USB 2.0 x6 USB 2.0 x6 USB 2.0 x6

N/A SATA x2 SATA x2 SATA x2 N/A SATA x2 SATA x2


SATA

IDE One 44-pin IDE N/A N/A One 44-pin IDE One 44-pin IDE One 44-pin IDE One 44-pin IDE
connector connector connector connector connector
SSD Compact Flash Compact Flash Compact Flash Compact Flash Compact Flash Compact Flash Compact Flash
socket x1 socket x1 socket x1 socket x1 socket x1 socket x1 socket x1
Parallel N/A N/A N/A N/A N/A N/A N/A

Audio High Definition Audio High Definition Audio High Definition Audio High Definition Audio High Definition Audio High Definition Audio
AC'97 2.3
2.1 channel 2.1 channel 2.1 channel 2.1 channel 2.1 channel 2.1 channel

Dimension 154(W) x 104(L) 146(W) x 102(L) 146(W) x 102(L) 146(W) x 102(L) 146(W) x 102(L) 146(W) x 102(L) mm; 146(W) x 102(L) mm;
mm; mm; mm; mm; mm; 5.75”(W) x 4.02”(L) 5.75”(W) x 4.02”(L)
6.07”(W) x 4.13”(L) 5.75”(W) x 4.02”(L) 5.75”(W) x 4.02”(L) 5.75”(W) x 4.02”(L) 5.75”(W) x 4.02”(L)

Page 74 75 76 77 78 79 80

73 ESB-PEB-2731VLA
3.5” Floppy-size, Ultra Low Voltage Intel®

PEB-2731VLA Celeron® M processor based Embedded


Board with VGA, LCD, LAN and Audio

Four USB ports


PS/2 Keyboard/Mouse CompactFlash
socket
VGA port
Fast Ethernet Line-out & MIC

+12V single voltage


input
LVDS interface

Mini-PCI connector
Intel® ULV Celeron® M
600MHz / 1G Hz processor Line-out & Mic-in VGA port
Intel® ICH4

Support up to 4 PCI devices


Four USB ports Fast Ethernet
via riser card
PS/2 Keyboard/Mouse
DVO interface
Intel® 852GM Rear I/O
SO-DIMM socket

FEATURES GENERAL
Processor CPU & Package: Ultra Low Voltage Intel® Celeron® M processor
 3.5” compact computing engine equipped with FSB: 400MHz
Ultra Low Voltage Intel® Celeron® M 600MHz/ Intel® 852GM and ICH4
Chipset/Core Logic
1GHz processor for fanless requirement
System Memory Up to 1GB DDR 266/200 SDRAM on one 200-pin SODIMM socket
 Wireless application can be accomplished by
adding Mini-PCI form factor wireless adapter BIOS Award BIOS

SSD - One Type II CF socket


 Display interface cover VGA, LVDS and DVO - On secondary EIDE channel
to fulfill common graphic needs
Storage Devices One 44-pin IDE connector
 Gold finger along short edge of board allows Yes
Watchdog Timer
up to four PCI devices expansion that increases
capability of the platform Expansion Interface - 4 PCI master expansion via riser card
- One Mini-PCI socket
 +12V powered embedded board makes the Hardware Monitoring Voltage, Fan, Temperature
platform smaller and lighter with portable power
Power Requirement +12V only
adapter
Dimension Dimension : 105.0(W) x 154.3(L) mm; 4.13"(W) x 6.07" (L)
 Equipped IrDA port enables wireless platform
remote control Environment Operating Temperature: 0 to 60oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

I/O
MIO RS232 x2

IrDA Yes (shared with one RS232)

ORDERING GUIDE Ethernet 10 BASE-T/100 BASE-TX Fast Ethernet (Intel® 82562EZ)

Audio AC'97 2.3 Audio


Standard PEB-2731VLA
3.5” Floppy-size, Ultra Low Voltage Intel® Celeron® M USB USB 2.0 x 6 (Four ports at rear I/O panel; dual ports internal)
600MHz processor based Embedded Board with Keyboard & Mouse PS/2 Keyboard/Mouse
VGA, LCD, LAN and Audio

Optional PEB-2731VLA-1G-Z
3.5” Floppy-size, Ultra Low Voltage Intel® Celeron® M DISPLAY
1GHz processor based Embedded Board with
Graphic Controller Intel® 852GM mobile optimized graphics controller
VGA, LCD, LAN and Audio
Graphic Memory Dynamically allocates 32/64MB system memory for display

Display Interface Support VGA, LVDS and DVO ports

ESB-PEB-2731VLA 74
3.5” Embedded size, Intel® Pentium® M or Celeron®

PEB-2130 M processor based on Embedded Board with DVI,


LVDS, Dual Gigabit Ethernet, Audio and USB

Compact Flash socket Dual Gigabit Ethernet ports


DVI-I port Four USB ports

LVDS Connector
Intel® Pentium® M (Socket type)
or Celeron® M processor

Intel® ICH6M

Intel® 910 GMLE Dual Gigabit Ethernet ports

Power Connector SO-DIMM Socket Four USB ports DVI-I port


Mini-PCI Express Socket SATA Connectors
Rear I/O

FEATURES SYSTEM
 ® ® ®
Intel Pentium M or Celeron M in Micro-FCPGA/ CPU Intel® Celeron® M or Pentium® M(socket type) processor

FCBGA package Chipset Intel® 910GMLE and ICH6M

 One 200-pin SO-DIMM supports DDR2 SDRAM System Memory One 200-pin SO-DIMM supports DDR2 400 up to 1GB
up to 1GB BIOS Award

 One Type II Compact Flash and two SATA ports SSD Type II CompactFlash socket

 Dual independent display: DVI and 18bit LVDS Storage Devices One CF socket and two SATA ports

Watchdog Timer Programmable via S/W from 1 sec. to 255 min.


 On board dual Gigabit Ethernet
Expansion Interface One Mini-PCI Express socket
 Wireless application can be accomplished by adding
Hardware Monitoring - FAN Speed (CPU and System)
Mini-PCI Express form factor wireless adapter - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
- Support case open function
PACKING LIST Power Requirement ATX compliant power

 ATX Power cable x1 Dimension 146(W) x102(L) mm; 5.75”(W) x 4.0”(L)


 CPU heatsink x1 Operation temperature: 0~55oC
Environment
 Utility CD x1 Storage temperature: -20~80oC
Operation humidity: 5~95%, non-condension

ORDERING GUIDE
Standard PEB-2130VGA-1000-Z I/O
3.5” ESB based on Intel® Celeron® M 1GHz processor SATA x2, RS232 x1 and RS232/422/485(selectable) x1, 8-bit Digital I/O x1
MIO
with DVI / LVDS, LAN, COM, USB and Audio
Ethernet Dual Gigabit Ethernet (Realtek RTL 8111B)
Optional PEB-2130VGA-600
Mic in, Line out
3.5” ESB based on Intel® Celeron® M 600MHz proces- Audio
sor with DVI / LVDS, LAN, COM, USB and Audio USB 4 x USB 2.0 ports & 2 x USB 2.0 with header
PEB-2130VGA
3.5” ESB based on socket type with DVI / LVDS, LAN, Keyboard & Mouse PS/2 Keyboard & Mouse (Header)
COM, USB and Audio

OPTIONAL DISPLAY
Graphic Controller Intel® 910GMLE GMA900
Part No. QTY Description Graphic Memory Intel® DVMT 3.0 supports up to 128MB video memory
B2900260 1 SATA cable DVI (Chrontel 7307C) / 18bit LVDS
Display Interface

75 ESB-PEB-2130
3.5” Embedded size, based on Intel® AtomTM
N270 Processor with DDR2 SDRAM, Dual

PEB-2131VG2A Display by VGA/LVDS, Gigabit Ethernet, Four


Power COM Ports and Audio

Dual Gigabit Ethernet ports


Compact Flash socket Line-out, Line-in & Mic header
DC In VGA port
Two USB ports

Line-out

DC 12V Input

24-bit LVDS port

Intel® AtomTM N270 Four COM ports

Intel® ICH7M Dual Gigabit Ethernet ports


DC in

HDD Power
connector
Two USB ports
KB/MS header Two SATA Ports Line-out VGA port
®
Intel 945GSE
Mini-PCI Express socket
Rear I/O

FEATURES SYSTEM
® TM CPU Intel® AtomTM N270 1.6GHz in FCBGA package
 Intel Atom N270 and 945GSE platform that
FSB: 533MHz
provides cost effective solution= technology
Chipset Intel® 945GSE and ICH7-M
 SATA and CF interface provide best cost effective
System Memory Up to 2GB DDR2 533 SDRAM on one SODIMM socket
storage for market
BIOS Award
 Support one SODIMM socket and up to 2GB
SSD CF: Support one Compact Flash socket
memory size
Storage Devices SATA: Support two SATA 150 drives
 Mini-PCI Express and power COM ports bring flexible
usage model Watchdog Timer Programmable via S/W from 1 sec. to 255 min.

Expansion Interface One Mini-PCI Express socket


 Dual Gigabit Ethernet (10/100/1G) with RJ-45
connector Hardware Monitoring FAN Speed(System), Temerature (CPU and System)
Vcore, 12V, 5V, 3.3V, VBAT
 High Definition audio with 2-channel amplifier@6W 12V DC In
Power Requirement
 Low profile rear I/O supports thin client application Dimension 146(L) x102(W) mm; 5.75”(L) x 4.0”(W)

Environment Operation temperature: 0~60oC


Storage temperature: -20~80oC
Operation humidity: 5~95%, non-condension
PACKING LIST
3 in 1 Heatsink x1
 SATA cable x1
 SATA power cable x1 I/O
 Utility CD x1 MIO Two SATA ports and RS232 x4 with power as pin header type

Ethernet Two Gigabit Ethernet with RJ45 connectors, IEEE802.3 10/100/1000 BASE-T
Compliant (Realtek RTL 8111D)
ORDERING GUIDE Audio High Definition Audio with Audio Amplifier (one Line-out jack and Line-out/
Line-in/Mic-in header)
Standard PEB-2131VG2A USB USB 2.0 x 2 ports & USB 2.0 with header x5
(R). PEB-2131VG2A. ESB. N270. 945GSE. ICH7-M. w/
DDRII SDRAM/VGA/LVDS/Dual GbE/Audio Keyboard & Mouse PS/2 Keyboard & Mouse with on board pin header

OPTIONAL DISPLAY
Graphic Controller Intel® 945GSE integrated Graphics Media Accelerator (Intel® GMA 950)
Part No. QTY Description
B6901970 1 USB cable Graphic Memory Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share
System memory up to 128MB
B7866130 1 COM port cable
Display Interface - Support CRT, 18bit/24bit LVDS (Chrontel 7308B-TF), display interfaces
- CRT display resolution up to 2048x1596 @ 85Hz refresh

ESB-PEB-2131VG2A 76
Intel® 45nm Ultra Low Power AtomTM processor

PEB-2737VLA based ECX embedded board with VGA, LVDS,


Gigabit Ethernet, Audio, USB and SDIO

VGA port GbE port & two USB ports


COM port Audio PS/2 KB/MS
Two USB ports

Power Connector

LVDS Interface

GPIO ports
Compact Flash Socket
Intel® AtomTM Z510/Z530 GbE port
processor and System
Controller Hub US15W PS/2 KB/MS COM port

Two SATA ports SDIO socket IDE Connector


Four USB ports Audio VGA port
SO-DIMM Socket Rear I/O

FEATURES SYSTEM
CPU Intel® Atom processor Z510 / Z530
 Intel® AtomTM processor Z510 / Z530 and System
FSB: 400/533 MHz
Controller Hub US15W (TDP< =5W)
Chipset Intel® System Controller Hub US15W
 One 200-pin SO-DIMM supports DDR2 SDRAM
System Memory One 200-pin SO-DIMM support DDR2 533/400 up to 2GB
up to 2GB
BIOS AMI
 One Type II CompactFlash, one IDE & two SATA
SSD Type II CompactFlash socket
ports
Storage Devices One 44-pin IDE connector & two SATA ports
 Dual independent display: VGA and 24bit LVDS
Watchdog Timer Programmable via S/W from 1 sec. to 255 min
 One Gigabit Ethernet
Expansion Interface N/A

Hardware Monitoring - Temerature (CPU and System)


- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)

Power Requirement ATX compliant power


PACKING LIST Dimension 102(W) x146(L) mm; 4.01”(W) x 5.74”(L)

Environment Operation temperature: 0~60oC


 ATX Power cable x1
Storage temperature: -20~80oC
 CPU heatsink x1 Operation humidity: 5~95%, non-condension
 Utility CD x1

ORDERING GUIDE
I/O
Standard PEB-2737VLA-1100 IDE x1, SATA x2, RS232/422/485 x2: One DB9 & one pin header, SDIO x1,
MIO
3.5” ESB based on Intel® AtomTM 1.1G processor with K/B x1, Mouse x1, GbE x1
processor with VGA/LVDS, LAN, COM, USB and
Audio Ethernet One Gigabit Ethernet (Realtek RTL 8111C)

Audio Mic in, Line out


Optional PEB-2737VLA-1600
3.5” ESB based on Intel® AtomTM 1.6G processor with USB USB 2.0 x 4 ports & USB 2.0 with header x4
VGA/LVDS, LAN, COM, USB and Audio

OPTIONAL
DISPLAY
Part No. QTY Description Graphic Controller Intel® System Control Hub US15W integrated graphics
B6900262 1 SATA cable Intel® GMA 500
Graphic Memory
B690004S 1 IDE cable
Display Interface VGA (Chrontel 7317A-TF) / 24bit LVDS

77 ESB-PEB-2737VLA
Intel® 45nm Ultra Low Power Menlow-XL proces-

PEB-2738 sor and chipset based ECX embedded board with


dual display, Audio, USB and SDIO

COM (RS232/422/485)

HDD Power connector

LVDS port
SDVO & PCIE x 1
connector

Intel® 45nm Ultra LOW


Power Menlow-XL
processor and Chipset Line-out and Mic-in
DC in

SDIO port Client USB port IDE port Four USB ports
COM port
GbE
KB/MS header
COM port
Rear I/O
FEATURES SYSTEM
CPU Intel® AtomTM processor Z510P / Z520PT
 Intel® AtomTM processor
Z500PT series and System
Controller Hub US15WPT Chipset Intel® System Controller Hub US15WPT

 One 200-pin SO-DIMM support DDR2 SDRAM System Memory One 200-pin SO-DIMM support DDR2 533 up to 2GB
up to 2GB AMI
BIOS
 Dual independent display: SDVO(by VGA/DVI/LVDS Type II Compact Flash socket
SSD
daughter card) and 24bit LVDS
Storage Devices One 44-pin IDE connector
 One Gigabit Ethernet
Watchdog Timer Programmable via S/W from 1sec. to 255min.
 TPM (Trusted Platform Module) could be added on
board (optional) Expansion Interface - SDVO/PCI-E x1/USB signals on one connector for daughter board
- SDIO header
 Customization (Extension card): BTB connector with - Temperature (CPU and System)
Hardware Monitoring
SDVO/USB/PCI-E x1 signal and SDIO pin header - Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
 Storage: One PATA / One CompactFlash / One USB Power Requirement DC 12V input
Flash / One SDIO
Dimension 102(W) x146(L) mm; 4.01”(W) x 5.7”(L)
 12V DC input
Environment - PEB-2738I
Operation temperature: -40~80oC
Storage temperature: -40~80oC
PACKING LIST Operation humidity: 5~95%, non-condensing

 CPU heatsink x1
 Utility CD x1
I/O
MIO IDE x1, One RS232/422/485 selectable at rear IO and one RS232 internal,
SDIO pin header x1, SDVO connector x1, Client USB port x1
ORDERING GUIDE Ethernet One RJ45 Gigabit Ethernet (Intel® 82574IT)

Audio Line-out and Mic-in


Standard PEB-2738IVA-1100
3.5” ESB based on Intel® AtomTM wide temperature 1.1G USB USB 2.0 x 4 & USB 2.0 with header x2
processor with LVDS/SDVO, COM, USB and Audio
Keyboard & Mouse One K/B & M/S pin header
Optional PEB-2738IVA-1300
3.5” ESB based on Intel® AtomTM wide temperature 1.3G
processor with LVDS/SDVO, COM, USB and Audio

DISPLAY
Graphic Controller Intel® System Control Hub US15WPT integrated graphics
OPTIONAL
Graphic Memory Intel® GMA 500
Part No. QTY Description Display Interface 24bit LVDS / SDVO
B6900262 1 IDE cable
AB9-3050Z 1 SDIO daughter board
AB9-3049Z 1 VGA daughter board

ESB-PEB-2738 78
3.5” Embedded size, Based on Intel® 45nm

PEB-2780VG2A
Low Power Pineview processor with DDR2
SODIMM, dual display by VGA/LVDS, Dual
GbE, Audio, COM and USB

Dual Gigabit Ethernet


12V DC-in
VGA RS232
USB x2
CF socket

RS232/422/485
GPIO
IDE
TWO RS232

USB x4
SO-DIMM socket

LVDS

Intel® ICH8M Intel® AtomTM Two SATA


N450
FEATURES SYSTEM
® TM CPU Intel® AtomTM processor N450
 Intel Atom processor N450 and ICH8M chipset
 One 200-pin SO-DIMM support DDR2 667 SDRAM Chipset Intel® ICH8M
up to 2GB System Memory One 200-pin SO-DIMM support DDR2 667 up to 2GB
 MPEG2 Decode in HW; independent display: VGA/ BIOS AMI
18 bit LVDS
SSD Type II CompactFlash socket
 Dual independent display: VGA/18bit LVDS
Storage Devices One 44-pin IDE connector and two SATA ports
 Dual Gigabit Ethernet
Watchdog Timer Programmable via S/W from 1sec. to 255min.
 Customization (Extension card): BTB connector
Expansion Interface One connector with PCIE x1 signal for daughter board
with PCIE x1 signal
 Storage: One PATA/One Compact Flash/Two Hardware Monitoring - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
SATA ports
Power Requirement 12V DC Input
 12V DC input
Dimension 146(L) x 105(W) mm; 5.75”(L) x 4.0”(W)

REAR/IO Environment Operation temperature: 0~60oC


Storage temperature: -20~80oC
Dual Gigabit Operation humidity: 5~95%, non-condension
CF socket Ethernet 12V DC-in
RS232 VGA

I/O
USB x2 One IDE, two SATA ports, four serial ports: One DB9 & three box headers, one
MIO
CF socket and one PCIE x1 header
PACKING LIST
Ethernet Dual RJ45 Gigabit Ethernet
 CPU heatsink x1
Audio High Definition Audio with one Line-out/Mic-in header
 Utility CD x1
USB 2 x USB 2.0 ports and 4 x USB 2.0 with header
 SATA cable x1
 SATA power cable x1 Keyboard & Mouse One K/B & M/S pin header

ORDERING GUIDE
Standard PEB-2780VG2A
3.5” Embedded size, Based on Intel 45nm Low Power DISPLAY
Pineview processor N450 with DDR2 SODIMM, Dual Graphic Controller Intel® AtomTM processor (N450) Integrated Intel® DX9 graphics
display by VGA/LVDS, Dual GbE, Audio, COM and
USB Graphic Memory Intel® Dynamic Video Memory Technology 4.0

Display Interface 18bit LVDS/VGA

OPTIONAL
Part No. QTY Description
B690004S 1 IDE Cable
B6901970 1 USB Cable
B7866130 1 COM Cable

79 ESB-PEB-2780VG2A
3.5” Embedded size, Based on Intel® 45nm

PEB-2770VG2A
Low Power Pineview processor with DDR2
SODIMM, dual display by VGA/LVDS, Dual
GbE, Audio, COM and USB

Dual Gigabit Ethernet


12V DC-in
VGA RS232
USB x2
CF socket

RS232/422/485
GPIO
IDE
TWO RS232

USB x4
SO-DIMM socket

LVDS

Intel® ICH8M Intel® AtomTM Two SATA


D510
FEATURES SYSTEM
® TM CPU Intel® AtomTM processor D510
 Intel Atom processor D510 and ICH8M chipset
 One 200-pin SO-DIMM support DDR2 667 SDRAM Chipset Intel® ICH8M
up to 2GB System Memory One 200-pin SO-DIMM support DDR2 667 up to 2GB
 MPEG2 Decode in HW; independent display: VGA/ BIOS AMI
18 bit LVDS
SSD Type II CompactFlash socket
 Dual independent display: VGA/18bit LVDS
Storage Devices One 44-pin IDE connector and two SATA ports
 Dual Gigabit Ethernet
Watchdog Timer Programmable via S/W from 1sec. to 255min.
 Customization (Extension card): BTB connector
Expansion Interface One connector with PCIE x1 signal for daughter board
with PCIE x1 signal
 Storage: One PATA/One Compact Flash/Two Hardware Monitoring - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
SATA ports
Power Requirement 12V DC Input
 12V DC input
Dimension 146(L) x 105(W) mm; 5.75”(L) x 4.0”(W)

REAR/IO Environment Operation temperature: 0~60oC


Storage temperature: -20~80oC
Dual Gigabit Operation humidity: 5~95%, non-condension
CF socket Ethernet 12V DC-in
RS232 VGA

I/O
USB x2 One IDE, two SATA ports, four serial ports: One DB9 & three box headers, one
MIO
CF socket and one PCIE x1 header
PACKING LIST
Ethernet Dual RJ45 Gigabit Ethernet
 CPU heatsink x1
Audio High Definition Audio with one Line-out/Mic-in header
 Utility CD x1
 SATA cable x1 USB 2 x USB 2.0 ports and 4 x USB 2.0 with header

 SATA power cable x1 Keyboard & Mouse One K/B & M/S pin header

ORDERING GUIDE
Standard PEB-2770VG2A
3.5” Embedded size, Based on Intel 45nm Low Power DISPLAY
Pineview processor D510 with DDR2 SODIMM, Dual Graphic Controller Intel® AtomTM processor (D510) Integrated Intel® DX9 graphics
display by VGA/LVDS, Dual GbE, Audio, COM and
USB Graphic Memory Intel® Dynamic Video Memory Technology 4.0

Display Interface 18bit LVDS/VGA

OPTIONAL
Part No. QTY Description
B690004S 1 IDE Cable
B6901970 1 USB Cable
B7866130 1 COM Cable

ESB-PEB-2770VG2A 80
Intel® Ultra Low Power AtomTM Processor based

NANO-8044 NANO-ITX Board with dual display, Gigabit


Ethernet, Audio, USB and SDIO

FEATURES
Intel® AtomTM processor Z510 / Z530 and System Controller Hub
US15W
One 200-pin SO-DIMM supports DDR2 SDRAM up to 2GB
Dual independent display: VGA and 24bit LVDS
One Type II Compact Flash & one IDE connector
One Intel® Gigabit Ethernet

NANO-8044 takes advantage of the latest Intel® AtomTM on leading Intel® AtomTM solution, NANO-8044 is a compact and
technologies. It supports DDR2 SDRAM, dual displays, one ultra low power dissipation board for Medical, Mobile Gaming
Gigabit Ethernet and one expansion PCI-Express x1 slot.Base and DSS applications.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM processor Z510 / Z530 Operating Temperature 0~55°C
FSB 400/533 MHz Storage Temperature -20~80°C
BIOS AMI BIOS Operating Humidity 5%~95% non-condensing
System Chipset Intel® System Controller Hub US15W Dimension 4.72” x 4.72” (120 mm x 120 mm)
System Memory One 200pin SO-DIMM support DDR2 400/533MHz up to 2GB
Storage - 1x 44 pin IDE
- 1 x CF (up to UDMA5 mode)
- 1 x SD REAR I/O
Watchdog Timer Programmable via S/W from 1sec. to 255sec.
H/W Monitor - Temperature (CPU and System) RS232/422/485 Gigabit Ethernet
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
GPIO On board programmable 8-bit Digital I/Os
Expansion One PCI-Express x1 slot

On Board I/O
USB Two USB 2.0 ports, Pitch 2.00mm
VGA USB
Others One 24 bits LVDS, 8bit GPIO pin header, one SD Audio

Rear I/O
Serial Port One RS232/422/485 port
Display One VGA (by Chrontel CH 7317A) ORDERING GUIDE
Gigabit Ethernet One RJ-45 LAN port
USB Four USB 2.0 ports NANO-8044-1100
Intel® AtomTM processor Z510 Nano-ITX Board
Audio Interface Line-out and Mic-in
NANO-8044-1600
Intel® AtomTM processor Z530 Nano-ITX Board
DISPLAY
PER-4110R
Graphic Controller Intel® System Controller Hub US15W integrated GMA 500 One slot PCI-E x1 riser card
Graphics device
Display Interface VGA / single channel 24-bit LVDS

81 NANO-ITX-NANO-8044
Intel® Ultra Low Power AtomTM Processor based

NANO-8045 NANO-ITX Board with dual display, Gigabit


Ethernet, Audio, USB and SATA

FEATURES
Intel® AtomTM processor Z510 / Z530 and System Controller Hub
US15W
One 200-pin SO-DIMM supports DDR2 SDRAM up to 2GB
Dual independent display: DVI-D and 24bit LVDS
One Type II Compact Flash & two SATA ports
One Realtek Gigabit Ethernet
Support DC 12V input

NANO-8045 takes advantage of the latest Intel® AtomTM NANO-8045 is a compact and ultra low power dissipation board
technologies. It supports DDR2 SDRAM, dual displays and for Medical, Mobile Gaming and DS applications.
one Gigabit Ethernet. Base on leading Intel® AtomTM solution,

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM processor Z510 / Z530 Operating Temperature 0~60°C
FSB 400/533 MHz Storage Temperature -20~80°C
BIOS AMI BIOS Operating Humidity 5%~95% non-condensing
System Chipset Intel® System Controller Hub US15W Dimension 4.72” x 4.72” (120 mm x 120 mm)
System Memory One 200pin SO-DIMM support DDR2 400/533MHz up to 2GB
Storage - 2 x SATA II
- 1 x CF (up to UDMA5 mode)
Watchdog Timer Programmable via S/W from 1sec. to 255sec.
REAR I/O
H/W Monitor - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V) RS232
Audio
GPIO On board programmable 8-bit Digital I/Os Gigabit Ethernet
Expansion N/A

On Board I/O
USB Four USB 2.0 ports, Pitch 2.00mm, one can support client USB
Others One 24 bits LVDS, 8 bit GPIO pin header, Line-out and Mic-in USB
DC 12V
pin header DVI-D

Rear I/O
Serial Port One RS232 port
Display One DVI-D (by Chrontel CH7307C) ORDERING GUIDE
Gigabit Ethernet One RJ-45 LAN port
USB Two USB 2.0 ports NANO-8045-1100
Intel® AtomTM processor Z510 Nano-ITX Board
Audio Interface Line-out and Mic-in
NANO-8045-1600
Intel® AtomTM processor Z530 Nano-ITX Board
DISPLAY
Graphic Controller Intel® System Controller Hub US15W integrated GMA 500
Graphics device
Display Interface DVI-D / single channel 24-bit LVDS

NANO-ITX-NANO-8045 82
Intel® Ultra Low Power AtomTM Processor based

NANO-8045L NANO-ITX Board with dual display, Gigabit


Ethernet, Audio, USB and SATA

FEATURES
Intel® AtomTM processor Z510 / Z530 and System Controller
Hub US15W
One 200-pin SO-DIMM supports DDR2 SDRAM up to 2GB
Dual independent display: DVI-D and 24bit LVDS
One Type II Compact Flash & two SATA ports
One Realtek Gigabit Ethernet
Support DC 12V input
Only 17mm height for rear I/O

NANO-8045L takes advantage of the latest Intel® AtomTM NANO-8045L is a compact and ultra low power dissipation
technologies. It supports DDR2 SDRAM, dual displays, one board for Medical, Mobile Gaming and DS applications.
Gigabit Ethernet. Base on leading Intel® AtomTM solution,

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM processor Z510 / Z530 Operating Temperature 0~60°C
FSB 400/533 MHz Storage Temperature -20~80°C
BIOS AMI BIOS Operating Humidity 5%~95% non-condensing
System Chipset Intel® System Controller Hub US15W Dimension 4.72” x 4.72” (120 mm x 120 mm)
System Memory One 200pin SO-DIMM support DDR2 400/533MHz up to 2GB
Storage - 2 x SATA II
- 1 x CF (up to UDMA5 mode)
Watchdog Timer Programmable via S/W from 1sec. to 255sec.
REAR I/O
H/W Monitor - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
GPIO On board programmable 8-bit Digital I/Os USB
Expansion N/A

On Board I/O
USB Four USB 2.0 ports, Pitch 2.00mm, one can support client USB
Others One 24 bits LVDS, 8 bit GPIO pin header, Line-out and Mic-in DVI-D Audio
pin header DC 12V Gigabit Ethernet

Rear I/O
Display One DVI-D (by Chrontel CH7307C)
Gigabit Ethernet One RJ-45 LAN port ORDERING GUIDE
USB Two USB 2.0 ports
NANO-8045L-1100
Audio Interface Line-out
Intel® AtomTM processor Z510 Nano-ITX Board

NANO-8045L-1600
DISPLAY Intel® AtomTM processor Z530 Nano-ITX Board
Graphic Controller Intel® System Controller Hub US15W integrated GMA 500
Graphics device
Display Interface DVI-D / single channel 24-bit LVDS

83 NANO-ITX-NANO-8045L
Leading Intel® latest ULV Mobile SFF 45nm CoreTM
2 Duo or Celeron® M Processor based NANO-

NANO-8050 ITX with DDR2 SODIMM, Dual Displays, Gigabit


Ethernet, Audio, USB

FEATURES
Intel® latest Ultra Low Voltage Mobile SFF 45nm CoreTM 2 Duo
or Celeron® M Processor
Intel® GS45 SFF and ICH9M SFF Chipset
One 200-pin SO-DIMM support DDR2 800/667MHz up to 2GB
Dual Display: VGA and 24-bit LVDS
One Intel® Gigabit Ethernet port
One PCI-Express x1 expansion slot
One Type II Compact Flash
Support iTPM function for more secure platforms

NANO-8050 adopts Intel® latest Small Form Factor(SFF) mobile x1 slot. Built in graphic media accelerator (GMA) 4500MHD
chipset and takes advantage of leading Intel® latest SFF CoreTM graphic engine, NANO-8050 can support 3D performance and dual
2 Duo / Celeron® M technologies with high performance. It can display by VGA and LVDS. This is a compact size with low-heat
support one DDR2 SODIMM memory, one Intel® Gigabit Ethernet solution for versatile applications such as Medical and DS.
port, one Type II Compact Flash, and one expansion PCI-Express

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® latest ULV Mobile SFF 45nm CoreTM 2 Duo or Celeron® Operating Temperature 0~60°C
M processor Storage Temperature -20~80°C
FSB 800/1066 MHz
Operating Humidity 5%~95% non-condensing
BIOS AMI BIOS
Dimension 4.72” x 4.72” (120 mm x 120 mm)
System Chipset Intel® GS45 SFF and ICH9M SFF Chipset
System Memory One 200-pin SO-DIMM support DDR2 800/667MHz up to 2GB
SSD One Type II Compact Flash (up to UDMA5 mode) REAR I/O
Watchdog Timer Programmable via S/W from 1sec. to 255sec.
H/W Monitor - Temperature (CPU and System)
RS232/422/485 Gigabit Ethernet
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
GPIO Onboard programmable 8-bit Digital I/Os
Expansion One PCI-Express x1 slot

On Board I/O
USB Two USB 2.0 ports
SATA Two SATA 300 ports VGA USB
Audio
Display One 24 bit LVDS connector
Others 8bit GPIO pin header

Rear I/O
ORDERING GUIDE
Serial Port One selectable RS232/422/485 port
NANO-8050-2260
Display One VGA NANO-ITX Board with Intel® CoreTM 2 Duo SP9300 2.26GHz CPU
Ethernet One 10BASE-T/100BASE-TX/1000BASE-T Ethernet port with
RJ45 connector NANO-8050-1200
NANO-ITX Board with Intel® CoreTM 2 Duo SU9300 1.2GHz CPU
USB Four USB 2.0 ports
Audio Interface Line-out and Mic-in NANO-8050-C1203
NANO-ITX Board with Intel® Celeron® ULV723 1.2GHz CPU
DISPLAY NANO-8050-C1202
Graphic Controller GMCH Integrated Intel® Graphics Media Accelerator (GMA) NANO-ITX Board with Intel® Celeron® ULV722 1.2GHz CPU
4500MHD
PER-4110R
Display Interface - VGA : Up to 2048 x 1536 (QXGA) One slot PCIEx1 riser card
- LVDS: Dual channel 24-bit LVDS support

NANO-ITX-NANO-8050 84
About Mini-ITX
The Mini-ITX form factor, was defined by the chipset manufacturers in Taiwan,
is a highly integrated, all-in-one x86-based embedded computer board that
measures a mere 170mm x 170mm. Its compact size and all-in-one design
simplifies and accelerates the implementation of an embedded PC system.
Portwell's Mini-ITX computer boards and barebones systems offer a wide
selection of microprocessors, power consumption, peripheral I/Os, expansion
and mechanical form factors.

Whether you’re working on medical instruments, thin network devices or digital


media systems, Portwell’s Mini-ITX boards and barebones systems are the per-
fect solutions to help you to deliver your products on time and stay one step ahead of the competition.

With 15-year experience in the design and manufacture of single board computers, Portwell not only provides one-
stop shopping for the off-the-shelf products, but also custom-built solutions, tailor-made to suit your needs.

Form factor comparison of embedded computer boards


Board Size (inch/mm) Board Size
Form Factor Expansion
L (inch) W (inch) L (mm) W (mm) (inch2)
PC/104 3.55 3.78 90.17 95.89 Module 13.42

PC/104+ 3.55 3.78 90.17 95.89 Module 13.42

STX 3.78 3.55 95.89 90.17 Carrier Board 13.42

ETX 4.49 3.74 114.00 95.00 Carrier Board 16.79

COM Express 4.92 3.74 125.00 95.00 Carrier Board 18.40

3.5” Embedded 5.75 4.02 146.00 102.00 Cables 23.12

3.5” ECX 5.75 4.13 146.00 105.00 Module 23.75

EPIC 6.50 4.53 165.00 115.00 Module 29.45

PICMG 1.3 Half-size 6.60 4.98 167.64 126.39 Backplane 32.87

PCI Half-size 7.28 4.80 185.00 122.00 Backplane 34.94

ISA Half-size 7.28 4.80 185.00 122.00 Backplane 34.94

PICMG 1.2 Half-size 7.52 4.80 191.03 121.92 Backplane 36.10

Mini-ITX 6.69 6.69 170.00 170.00 On Board 44.76

5.25” Embedded 5.75 8.00 146.05 203.20 Cables 46.00

EBX 5.75 8.00 146.05 203.20 Module 46.00

PICMG 1.0 Full-size 13.33 4.80 338.58 121.92 Backplane 63.98

PICMG 1.2 Full-size 13.33 4.80 338.58 121.92 Backplane 63.98

PICMG 1.3 Full-size 13.33 4.98 338.58 126.39 Backplane 66.38

Flex ATX 9.00 7.50 228.60 190.50 On Board 67.50

Micro-ATX 9.60 9.60 243.84 243.84 On Board 92.16

Embedded ATX 9.60 9.60 243.84 243.84 On Board 92.16

ATX 12.00 9.60 304.80 243.84 On Board 115.20

SSI 12.00 13.00 330.20 330.20 On Board 156.00

85 About Mini-ITX
Mini-ITX Reference Table

MODEL WADE-8067 WADE-8066 WADE-8068 WADE-8046

Form Factor MINI-ITX MINI-ITX MINI-ITX MINI-ITX

CoreTM 2 Duo/ CoreTM Solo /


CPU CoreTM 2 Duo/ Celeron® M CoreTM 2 Duo/ Celeron® M CoreTM 2 Duo/ Celeron® M
CoreTM Duo and Celeron® M

Chipset GM45 + ICH9ME GME965 + ICH8ME GME965 + ICH8ME 945GME + ICH7-M

FSB 1066/800/667 MHz 800/533 MHz 800/533 MHz 667/ 533 MHz

Max Memory Two SO-DIMMs / 8GB Two SO-DIMMs / 4GB Two SO-DIMMs / 4GB Two SO-DIMMs / 4GB

Memory Chip DDR3 DDR2 DDR2 DDR2

VGA / DVI-D / LVDS / HDMI /


Display DVI-I / TV-OUT VGA / LVDS VGA / LVDS / DVI
TV-OUT

One PCI slot, One PCI-E x1 slot One PCI slot, One PCI-E x1 slot One PCI-E x1 slot, One Mini
Expansion One PCI-E x4 slot
with PCI-E x4 interface with PCI-E x4 interface PCI socket

LAN GbE x 2 GbE x 2 GbE x 2 GbE x 2

Serial RS232 x 1, RS232/422/485 x1 RS232 x 1, RS232/422/485 x1 RS232 x 3, RS232/422/485 x1 RS232 x 3, RS232/422/485 x1

USB USB 2.0 x 6 USB 2.0 x 8 USB 2.0 x 8 USB 2.0 x 6

SATA SATA x 4 SATA x 2 SATA x 2 SATA x 2

IDE N/A N/A N/A One 44pin IDE connector

SSD N/A Compact Flash socket x1 Compact Flash socket x1 Compact Flash socket x1

Parallel N/A N/A LPT header x 1 LPT header x 1

Audio High Definition Audio 2.1 channel High Definition Audio 5.1 channel High Definition Audio 5.1 channel High Definition Audio 5.1 channel

Dimension 6.69” x 6.69” 6.69” x 6.69” 6.69” x 6.69” 6.69” x 6.69”

Page 90 91 92 93

Mini-ITX Reference Table 86


Mini-ITX Reference Table

MODEL WADE-8065 WADE-8071 WADE-8070 WADE-8072

Form Factor MINI-ITX MINI-ITX MINI-ITX MINI-ITX

Core™ 2 Duo/ CoreTM Solo /


CPU Intel® ATOM™ N270 1.6GHz Intel® ATOM™ N270 1.6GHz Intel® ATOMTM N270 1.6GHz
Core™ Duo and Celeron® M

Chipset 945GME + ICH7-M 945GSE + ICH7-M 945GSE + ICH7-M 945GSE + ICH7-M

FSB 667/533 MHz 533/667 MHz 533 MHz 533 MHz

Max Memory Two SO-DIMMs / 4GB One SO-DIMM/ 2GB One SO-DIMM / 2GB One SO-DIMM / 2GB

Memory Chip DDR2 DDR2 DDR2 DDR2

Display VGA / LVDS / DVI VGA/LVDS VGA / LVDS / DVI VGA / LVDS

One PCI-E x1 slot, One Mini One PCI slot, One PCI-E x1 slot
Expansion One PCI slot One PCI-Express x1 slot
PCI socket and One Mini-PCIE socket

LAN GbE x 3 Gbe x 1 GbE x 2 GbE x 2

Serial RS232 x 1, RS232/422/485 x1 RS232 x 2 RS232 x 3, RS232/422/485 x1 RS232 x 3, RS232/422/485 x1

USB USB 2.0 x 6 USB 2.0 x 6 USB 2.0 x 6 USB 2.0 x 6

SATA SATA x 2 SATA x 2 SATA x 2 SATA x 2

IDE One 44pin IDE connector One 44pin IDE Connector One 44pin IDE connector One 44pin IDE connector

SSD Compact Flash socket x1 Compact Flash Socket*1 Compact Flash socket x1 Compact Flash socket x1

Parallel N/A N/A LPT header x 1 LPT header x 1

Audio High Definition Audio 5.1 channel High Definition Audio 2.1 channel High Definition Audio 5.1 channel High Definition Audio 2.1 channel

Dimension 6.69” x 6.69” 6.69”x 6.69”(170mm x 170mm) 6.69” x 6.69” 6.69” x 6.69”

Page 94 95 96 97

87 Mini-ITX Reference Table


Mini-ITX Reference Table

MODEL WADE-8170 WADE-8044 WADE-8047 WADE-8180

Form Factor MINI-ITX MINI-ITX MINI-ITX MINI-ITX

CPU Intel® ATOMTM N270 1.6GHz Celeron® M Celeron® M Core™ 2 Quad/ CoreT™ 2 Duo

Chipset 945GSE + ICH7-M 910GMLE+ICH6-M 910GMLE+ICH6-M Q45+ICH10DO

FSB 533 MHz 400 MHz 400 MHz 1333/1066/800 MHz

Max Memory One SO-DIMM/ 2GB Two 240pin DIMMs / 2GB Two 240pin DIMMs / 2GB Two 240pin DIMMs / 2GB

Memory Chip DDR2 DDR2 DDR2 DDR3

Display VGA/DVI-D VGA / LVDS / DVI (Optional) Dual VGA / LVDS VGA/DVI-D

Expansion One PCI-Express x1 slot One PCI x1 slot One PCI x1 slot One PCI-Express x16 slot

LAN Gbe x 2 GbE x 2 Fast Ethernet x 2 Gbe x 2

Serial RS232 x 2 RS232 x 3, RS232/422/485 x1 RS232 x 3, RS232/422/485 x1 RS232 x 2

USB USB 2.0 x 8 USB 2.0 x 8 USB 2.0 x 8 USB 2.0 x 8

SATA SATA x 2 SATA x 2 SATA x 2 SATA x 4

IDE One 44pin IDE Connector One 44pin IDE connector One 44pin IDE connector N/A

SSD Compact Flash Socket*1 Compact Flash socket x1 Compact Flash socket x1 N/A

Parallel N/A LPT header x 1 LPT header x 1 N/A

Audio High Definition Audio 5.1 channel High Definition Audio 2.1 channel High Definition Audio 2.1 channel High Definition Audio 5.1 channel

Dimension 6.69”x 6.69”(170mm x 170mm) 6.69” x 6.69” 6.69” x 6.69” 6.69”x 6.69”

Page 98 99 100 101

Mini-ITX Reference Table 88


Mini-ITX Reference Table

MODEL WADE-8056 WADE-8556 WADE-8656 WADE-8055

Form Factor MINI-ITX MINI-ITX MINI-ITX MINI-ITX

CoreTM 2 Uuad / CoreTM 2 Duo CoreTM 2 Uuad / CoreTM 2 Duo CoreTM 2 Uuad / CoreTM 2 Duo CoreTM 2 Duo/ Pentium® 4 and
CPU / Pentium® 4 and Celeron® D / Pentium® 4 and Celeron® D / Pentium® 4 and Celeron® D Celeron® D

Chipset Q965+ICH8DO Q965+ICH8DO Q965+ICH8DO 945G + ICH7

FSB 1066 / 800 / 533 MHz 1066 / 800 / 533 MHz 1066 / 800 / 533 MHz 1066 / 800 / 533 MHz

Max Memory Two 240pin DIMMs / 4GB Two 240pin DIMMs / 4GB Two 240pin DIMMs / 4GB Two SO-DIMMs / 4GB

Memory Chip DDR2 DDR2 DDR2 DDR2

Display VGA VGA / DVI-D VGA VGA

One PCI x1 slot, One Mini PCI One PCI x1 slot, One Mini PCI
Expansion One PCI x16 slot One PCI x1 slot
socket socket

LAN GbE x 1 GbE x 1 GbE x 2 GbE x 2

Serial RS232 x 4 RS232 x 4 RS232 x 1, RS232/422/485 x1 RS232 x 1, RS232/422/485 x1

USB USB 2.0 x 6 USB 2.0 x 6 USB 2.0 x 8 USB 2.0 x 8

SATA SATA x 4 SATA x 4 SATA x 6 SATA x 4

IDE N/A N/A N/A N/A

SSD N/A N/A N/A Compact Flash socket x1

Parallel N/A N/A N/A N/A

Audio High Definition Audio 2.1 channel High Definition Audio 2.1 channel High Definition Audio 2.1 channel High Definition Audio 5.1 channel

Dimension 6.69” x 6.69” 6.69” x 6.69” 6.69” x 6.69” 6.69” x 6.69”

Page 102 103 104 105

89 Mini-ITX Reference Table


Leading Intel® 45nm CoreTM 2 Duo processor or
WADE-8067 Celeron® M processor based Mini-ITX with DDR3
SDRAM, HDMI, Dual Gigabit Ethernet, Audio and USB

FEATURES
Intel® CoreTM 2 Duo / Celeron® M processors
Intel® GM45 and ICH9M-E Chipset
Two SO-DIMMs support dual channel DDR3 SDRAM up to
8GB
Dual Display: VGA / DVI / HDMI / LVDS / TV-out, 3rd Display
via PCI-Express graphic card
Support Intel® Active Management Technology 4.0
Integrated latest Trusted Platform Module (iTPM)

Built with latest mobile Intel® GM45 Express chipset, WADE-8067 In addition, with its display-enriched interface it can support
takes advantage of Intel® CoreTM 2 Duo technologies which has various multimedia devices, WADE-8067 is one industrial-grade
high performance and excellent power management features. embedded Mini-ITX motherboard for POS, Lottery, Medical,
It not only supports dual display by VGA / DVI / HDMI / LVDS / Gaming, DVR, Digital Signage and Kiosk.
TV-out and the third display via PCI-Express expansion slot.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo processor Power Requirement +12V(CPU) @ 0.53A; +12V(System) @ 0.2A; +5V @ 1.96A;
FSB 667/800/1066MHz +3.3V @ 0.16A
Operating Temperature 0~60°C
BIOS AMI BIOS
®
Storage Temperature -20~80°C
System Chipset Intel GM45 and ICH9M-E Chipset
Operating Humidity 5~95% non-condensing
System Memory Two 204pin SO-DIMMs support dual channel DDR3 SDRAM
up to 8GB Dimension 6.69” x 6.69” (170 mm x 170 mm)
Storage 4 x SATA
Watchdog Timer Programmable via S/W from 1sec. to 255min
H/W Monitor FAN Speed(CPU and System), Temperature(CPU and
REAR I/O
System),Voltage, Case open function
GPIO On board programmable 8-bit Digital I/Os Gigabit Ethernet
RS232/422/485 VGA
Expansion One PCI-E x 4 slot

I/O
MIO 1 x RS232, 1 x RS232/422/485, 1 x TV-out header RS232 DVI-D
HDMI USB Audio
USB 4 x USB 2.0 ports and 2 x USB 2.0 with header
Audio Interface Mic-in, Line-in and Line-out, High Definition Audio 2.1 channel
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Intel® 82567 and 82574L)
ORDERING GUIDE
WADE-8067PE
Intel® CoreTM 2 Duo and Intel® Celeron® M processor Based Mini-ITX Board with
VGA, DVI, HDMI, TV-out, Dual GbE LAN, Audio and USB
DISPLAY PEP-5A1X1
Chipset Intel® GM45 GMCH Integrated Intel® Graphics Media One PCI-E x4 riser card
Accelerator (GMA) 4500MHD
Display Memory Intel® Dynamic Video Memory Technology (Intel® DVMT 5.0 ) B6931170
Active cooler
Multi Display LVDS / DVI-D (Chrontel CH7318B) / HDMI (Chrontel CH7318B)
/ VGA / TV-out

Mini-ITX-WADE-8067 90
Leading Intel® CoreTM 2 Duo processor based Mini-
WADE-8066 ITX Board with DDR2 SDRAM, Dual Displays, Two
GbE LAN ports, Audio and USB

FEATURES
Intel® CoreTM 2 Duo and Celeron® M processor
Intel® GME965 and ICH8ME chipset
Two 200pin SO-DIMMs support dual channel DDR2
SDRAM up to 4GB
Dual Display :DVI-I / LVDS / TV-Out, 3rd Display via
expansion slot
One PCI slot and one PCI-E x 1 slot with PCI-E x 4
signal

Built with Intel® latest mobile chipset GME965, WADE-8066 memory architecture. WADE-8066 supports dual display
takes advantage of Intel® CoreTM 2 Duo technologies. The by VGA, DVI, LVDS and TV-Out. With its display-enriched
graphic media accelerator X3100 provides both fast video interface, WADE-8066 can support various multimedia devices.
response time and high quality images via the two-channel

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo and Intel® Celeron® M processor Power Requirement +12V(System) @ 2.59A; +5V @ 2.96A; +3.3V @ 1.31A
(Socket P) Operating Temperature 0~55°C
FSB FSB 800/533 MHz
Operating Humidity 0%~90% relative humidity, noncondensing
BIOS Award BIOS
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Chipset Intel® GME965 and ICH8ME Chipset
Weight 0.94 lbs (0.43 Kg)
System Memory Two 200pin SO-DIMMs support dual channel DDR2 SDRAM
up to 4GB
Storage 2 x Serial ATA connector high-speed data transfers at up to
3 Gb/s REAR I/O
SSD 1 x Compact Flash
Watchdog Timer Reset; 1 sec.~255 min. and 1 sec. or 1 min./step
Gigabit Ethernet
H/W Status Monitor Monitoring system temprature, voltage, and cooling fan
KB/MS
status. Auto throttling control when CPU overheats
GPIO On-board programmable 16 Digital I/O interface
Expansion One PCI slot and One PCI-E x 1 slot (with PCI-E x 4 signal)

I/O
MIO 1 x RS232, 1 x RS232/422/485 selectable, 1 x K/B, 1 x Mouse DVI-I USB Audio
RS232
IrDA IrDA 1.0
USB 4 x USB 2.0 ports and 4 x USB 2.0 with header
Audio Interface Mic in, Line in, Line out, High Definition Audio 5.1 channel ORDERING GUIDE
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Intel® 82566MM and Mavell88E8053)
WADE-8066
Intel® CoreTM 2 Duo and Celeron® M processors Main Board with
DVI, Audio, GbE LANs, 8 x USB 2.0
DISPLAY
Chipset Intel® GME965 Integrated GMA x3100 Graphics device PEP-581R/582R
Display Memory Intel® DVMT 4.0 supports up to 384 MB video memory
One/Two slots PCI riser card
Resolution Analog Display: Up to 2048 x 1536 (QXGA) PEP-592R
Digital DVI Display: Up to 1600 x 1200 (UXGA) One PCI and one PCI-E x4 slot riser card
Multi Display 24-bit, dual Channel LVDS / TV-out / VGA / DVI (Silicon Image
SiI 1362)
PER-4210R
One slot PCI-E x4 riser card
B9970540
1U active heatsink

91 Mini-ITX-WADE-8066
Leading Mobile Intel® CoreTM 2 Duo Processor Mini-ITX
WADE-8068 with DDR2 SDRAM, Dual Displays, Two GbE LAN ports,
Four COM Ports, LPT and USB

FEATURES
Intel® CoreTM 2 Duo and Celeron® M processors
Intel® GME965 and ICH8M-E Chipset
Two 200-pin SO-DIMMs support dual channel DDR2 SDRAM
up to 4GB
Dual Display: VGA / 24bit LVDS, 3rd Display via expansion
slot Dual Gigabit Ethernet ports
Two SATA ports and One Type II Compact Flash
One PCI slot and one PCI-E x 1 slot with PCI-E x 4 signal
Three RS232 ports and one RS232/422/485 port

The WADE-8068 built with Intel® mobile GME965 chipset and graphic device, WADE-8068 can support high 3D performance
takes advantage of Intel® CoreTM 2 Duo technologies that can dual display by VGA and LVDS. With enriched serial ports make
support dual channel DDR2 memory, two Gigabit Ethernet WADE-8068 can be adopted for diversity applications such as
ports, one expansion PCI-Express x1 slot and one PCI slot. Panel PC, Lottery, Medical, Gaming and Digital Signage.
Base on integrated graphic media accelerator (GMA) X3100

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo and Intel® Celeron® M processor Power Requirement +12V(System) @ 2.66A; +5V @ 3.74A; +3.3V @ 0.83A
(Socket P) Operating Temperature 0~55°C
FSB 800/533 MHz
Operating Humidity 5%~95% noncondensing
BIOS Award BIOS
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Chipset Intel® GME965 & ICH8ME Chipset
Weight 0.94 lbs (0.43 Kg)
System Memory Two 200-pin SO-DIMM support dual channel DDR2 SDRAM up
to 4GB
Storage 2 xSerial ATA connector high-speed data transfers at up to
3Gb/s
SSD 1 x Compact Flash
REAR I/O
Watchdog Timer Programmable via S/W from 1sec. to 255min.
KB/MS Gigabit Ethernet
H/W Monitor FAN Speed(CPU and System), Temperature(CPU and System), RS232/422/485
Voltage, Case open function
GPIO On board programmable 16-bit Digital I/Os
Expansion One PCI slot and one PCI-E x 1 slot (with PCI-E x 4 signal)

I/O
MIO 1 x LPT, 3 x RS232 port, 1 x RS232/422/485 selectable, 1 x K/B, RS232 VGA USB
1 x Mouse Audio
USB 4 x USB 2.0 ports and 4 x USB 2.0 ports with header
Audio Interface Mic-in, Line-out, High Definition Audio 5.1 channel
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
(Intel® 82566MM and Realtek 8111C)
WADE-8068
Intel® CoreTM 2 Duo and Intel® Celeron® M processor Based Mini-ITX Board with
DISPLAY VGA, 24-bit LVDS, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports
Chipset Intel® GME965 GMCH Integreated Intel® GMA x3100 PEP-581R/582R
Display Memory Intel® DVMT 4.0 supports up to 384MB video memory One/Two slots PCI riser card
Resolution Analog Display: Up to 2048 x 1536 (QXGA)
Digital LVDS: Up to 1600 x 1200 (UXGA)
PEP-592R
One PCI and one PCI-E x4 slot riser card
Multi Display 24bit, dual channel LVDS / VGA
PER-4210R
One slot PCI-E x4 riser card
B9970540
1U active heatsink

Mini-ITX-WADE-8068 92
Intel® CoreTM 2 Duo processor based Mini-ITX Board
WADE-8046 with DDR2 SDRAM, VGA/ LVDS / DVI, Gigabit Ethernet,
Audio and USB

FEATURES
Intel® CoreTM 2 Duo / CoreTM Duo / Celeron® M processor
Intel® 945GME and ICH7-M chipset
Two 200-pin SO-DIMMs support dual channel DDR2 SDRAM
up to 4GB
Dual display: VGA / LVDS / DVI, 3rd display via PCI-Express x
1graphic card
One PCI-Express x 1 expansion slot and one Mini PCI socket
One Compact Flash socket & high definition audio

WADE-8046 is a high performance Mini-ITX embedded board for takes advantage of Intel® CoreTM 2 Duo / CoreTM Duo / Celeron®
applications that need dual channel DDR2 memory, two Gigabit M processor. WADE-8046 can provide triple display for diversity
Ethernet ports, one expansion PCI-Express x1 slot and one applications such as Lottery, Medical, Gaming and Digital
Mini PCI socket. Built in Intel® 945GME and ICH7-M chipset, it Signage.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo / CoreTM Duo / Celeron® M processor Power Requirement +12V(CPU) @ 1.33A; +12V(System) @ 0.33A; +5V @ 1.74A;
FSB 533/667 MHz +3.3V @ 0.72A
Operating Temperature 0~60°C
BIOS Award BIOS
Storage Temperature -20~80°C
System Chipset Intel® 945GME GMCH and ICH7-M
Operating Humidity 5~95% non-condensing
System Memory Two 200pin SO-DIMM support dual channel DDR2 SDRAM up
to 4GB Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
Storage - 2 x SATA
- 1 x 44 pin IDE connector
SSD 1 x Compact Flash share the same channel with IDE and
support UDMA REAR I/O
Watchdog Timer Programmable via S/W from 1sec. to 255min
H/W Status Monitor FAN Speed(CPU and System), Temperature(CPU and System), VGA Gigabit Ethernet
Voltage, Case open function RS232/422/485
GPIO Onboard programmable 8-bit Digital I/Os
Expansion 1 x PCI-Express x1 slot, 1 x Mini PCI socket

I/O
MIO Two RS232 ports, one Parallel port
IrDA N/A KB/MS
DVI-D USB Audio
USB 4 x USB 2.0 ports and 2 x USB 2.0 ports with header RS232

Audio Interface Line-out , Line-in and Mic-in


ɈDVI-I connector support DVI-D signal only
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Realtek 8111C)
ORDERING GUIDE
DISPLAY
WADE-8046
Chipset - Intel® 945GME GMCH Integrated
Intel® CoreTM 2 Duo / CoreTM Duo / Celeron® M processors Mini-ITX Board
- Intel® GMA 950 graphics
Display Memory Intel® DVMT 3.0 supports up to 224MB video memory PEP-5B1X1
Resolution Analog Display: Up to 2048 x 1536 (QXGA) One PCI-E x1 riser card
Digital LVDS: Up to 1600 x 1200 (UXGA)
Digital DVI: Up to 1600 x 1200 (UXGA)
B9970542
Active cooler
Multi Display Dual Channel 18-bit LVDS / VGA / DVI (Chrontel CH7307)

93 Mini-ITX-WADE-8046
Network Enriched Intel® CoreTM 2 Duo Processor based

WADE-8065 Mini-ITX Board with Dual Displays, Three GbE LAN


ports, Audio and USB

FEATURES
Intel® CoreTM 2 Duo / CoreTM solo / CoreTM Duo and Celeron® M
processors
Intel® 945GME and ICH7-M Chipset
Two 200-pin SO-DIMMs support dual channel DDR2 SDRAM
up to 4GB
Dual Display: VGA / DVI / LVDS, 3rd Display via expansion slot
Three Intel® Gigabit Ethernet

WADE-8065 is a network bandwidth-enriched solution. With a memory structure that enhances graphic performance. Three
low power consumption mobile processor, it not only provides GbE LAN ports provide the wide bandwidth necessory for
more than adequate computing power, but also eliminates any communication or network related applications. WADE-8065 is the
heat issues. Dual video outputs are supported by two-channel preferred choice where high price/performance ratio is a criterion.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo / CoreTM Duo / CoreTM Solo processor Power Requirement +12V(CPU) @ 1.16A; +12V(System) @ 0.32A; +5V @ 1.58A;
FSB 667/533 MHz +3.3V @ 0.74A
Operating Temperature 0~55°C
BIOS Award BIOS
Operating Humidity 0%~90% relative humidity, noncondensing
System Chipset Intel® 945GME and ICH7-M Chipset
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory 2 x 200-pin dual channel DDR2 SDRAM DIMM 667/533 MHz
support up to 4GB Weight 0.94 lbs (0.43 Kg)
Storage - 1 x IDE
- 2 x SATA
SSD 1 x Compact Flash REAR I/O
Watchdog Timer Reset:1 sec.~255 min. and 1 sec. or 1 min./step
RS232/422/485 Gigabit Ethernet
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan VGA
status. Auto throttling control when CPU overheats
GPIO On-board programmable 8-bit Digital I/O interface
Expansion 1 x PCI slot

I/O
RS232 Audio
MIO 1 x RS232, 1 x RS232/422/485 selectable, 1 x K/B, 1 x Mouse, KB/MS DVI-D USB
3 x GbE
USB 2 x USB 2.0 ports and 4 x USB 2.0 with header ɈDVI-I connector support DVI-D signal only
Audio Interface Mic-in, Line-in, Line-out, High Definition Audio 5.1 channel
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
(Intel® 82574L)
WADE-8065
Intel® CoreTM 2 Duo processor Mini-ITX Board with VGA, LCD, Audio,
DISPLAY three GbE LANs and 6 USB 2.0 ports
Chipset Intel® 945GME Integreated Intel® GMA 950 graphics
PEP-581R/582R
Display Memory Integrated Intel® Graphics Media Accelerator GMA 950, and One/Two slots PCI riser card
share system memory to 224 MB
Resolution Analog Display Port: QXGA 2048 x 1536 B9970540
Digital LVDS Port: UXGA 1600 x 1200 1U active cooler
Multi Display 18-bit, dual Channel LVDS / VGA / DVI (Chrontel CH7307)

Mini-ITX-WADE-8065 94
Intel® Low Power AtomTM N270 1.6GHz Processor based
Mini-ITX Board with DC12V input, dual display, Gigabit
WADE-8071 Ethernet, Two SATA Ports, Two COM ports and Six USB
Ports support thin client application

FEATURES
 Intel® ATOMTM N270 1.6GHz processor
 Intel® 945GSE and ICH7-M chipset
 One 200-pin SO-DIMM supports single channel DDR2
SDRAM up to 2GB
 Dual display: VGA / LVDS, 3rd display via PCI-Express
x1 graphic card
 One PCI-Express x1 expansion slot
 12V DC Input
 20mm height supports thin client application

Built with Intel® mobile 945GSE chipset, WADE-8071 takes RS232 serial ports, two SATA, six USB ports and
advantage of Intel® AtomTM N270 technologies. WADE-8071 one PCI-Express x1 expansion slot. WADE-8071 is not only a
features with its low power and also can provide dual displays suitable choice for fanless and low profile usage but also the best
such as LVDS and VGA. In addition, WADE-8071 has one SODIMM solution for POS, Medical, Gaming and Digital Signage applications.
socket which supports DDR2 SDRAM, one Gigabit Ethernet, two

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM N270 1.6GHz processor Power Requirement DC Input
FSB 533/667 MHz Operating Temperature 0~60°C
BIOS Award BIOS DC Input 10%~90% non-condensing
System Chipset Intel® 945GSE GMCH and ICH7-M Dimension 6.69’’ x 6.69’’ (170mm x 170mm)
One 200-pin SO-DIMM supports single channel
System Memory
DDR2 SDRAM up to 2GB
Storage 2 x SATA, 1 x IDE
SSD 1 x Compact Flash share the same channel with IDE
and support UDMA
Watchdog Timer Programmable via S/W from 1sec. to 255min. REAR I/O
FAN Speed(CPU and System), Temperature
H/W Status Monitor
(CPU and System),Voltage, Case open function
GPIO Onboard programmable 8-bit Digital I/Os Gigabit Ethernet
Expansion 1 x PCI-Express slot

I/O
MIO 1 x IDE, 2 x RS232 ports, 1x K/B, 1 x Mouse, 1 x CF DC RS232 VGA USB Audio
USB 4 x USB 2.0 ports and 2 x USB 2.0 with header
Audio Interface Mic-in, Line-out
Ethernet Interface IEEE 802.3 10/100/1000 BASE-T Gigabit Ethernet compliant

DISPLAY ORDERING GUIDE


Chipset Intel® 9945GSE GMCH Integrated Intel® GMA 950 graphics
Display Memory Intel® DVMT 3.0 share system memory up to 128MB WEDE-8071
Multi Display - Analog Display: Up to 2048 x 1536 (QXGA) Intel® Low Power AtomTM N270 1.6GHz Processor based Mini-
- Digital LVDS: Up to 1600 x 1200(UXGA) ITX Board with DC12V input, dual display, Gigabit Ethernet, Two
SATA Ports, Two COM ports and Six USB Ports support thin client
LVDS Dual Channel 18-bit and 24-bit output
application.

95 Mini-ITX-WADE-8071
Intel® Low Power AtomTM N270 1.6GHz Processor
based Mini-ITX Board with dual display, Gigabit
WADE-8070 Ethernet, Two SATA Ports, Four COM ports and Six
USB Ports

FEATURES
Intel® AtomTM N270 1.6GHz processor
Intel® 945GSE and ICH7-M chipset
One 200-pin SO-DIMM supports single channel DDR2
SDRAM up to 2GB
Dual display: VGA / LVDS / DVI, 3rd display via PCI-Express x1
graphic card
One Mini-PCI and one PCI-Express x1 expansion slot
Two SATA, one Compact Flash socket & one IDE connector

Built with Intel® mobile 945GSE chipset, WADE-8070 takes advantage serial ports, two SATA, one Mini PCI socket and one PCI-Express x1
of Intel® AtomTM N270 technologies. WADE-8070 features with its expansion slot. WADE-8070 is not only a suitable choice for fanless
low power and also can provide multiple displays such as LVDS, usage but also the best solution for POS, Medical, Gaming and Digital
VGA and DVI. In addition, WADE-8070 has one SO-DIMM socket Signage applications.
which supports DDR2 SDRAM, dual Gigabit Ethernet, two RS232

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM N270 1.6GHz processor Power Requirement +12V(CPU) @ 0.17A; +12V(System) @ 0.24A; +5V @ 1.31A;
FSB 533 MHz +3.3V @ 0.55A
Operating Temperature 0~60°C
BIOS Award BIOS
Operating Humidity 10%~90% non-condensing
System Chipset Intel® 945GSE GMCH and ICH7-M Chipset
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory One 200-pin SO-DIMM supports single channel DDR2 SDRAM
up to 2GB
Storage - 2 x SATA
- 1 x IDE
SSD 1 x Compact Flash share the same channel with IDE and support REAR I/O
UDMA
Watchdog Timer Programmable via S/W from 1sec. to 255min
RS232/422/485 Gigabit Ethernet
H/W Status Monitor FAN Speed(CPU and System), Temperature(CPU and System),
Voltage, Case open function KB/MS Audio
VGA
GPIO Onboard programmable 8-bit Digital I/Os
Expansion 1 x Mini-PCI socket, 1 x PCI-Express x1 slot

I/O
MIO 1 x EIDE, 3 x RS232 port, 1x K/B, 1 x Mouse, RS232 DVI-D USB
1 x RS232/422/485 selectable
ɈDVI-I connector support DVI-D signal only
USB 4 x USB 2.0 ports and 2 x USB 2.0 with header
Audio Interface Mic in and Line-out, High Definition Audio 5.1 channel
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
(Realtek 8111C)
WADE-8070
Intel® AtomTM N270 1.6GHz processor based Mini-ITX Board with VGA, 18bit LVDS, DVI,
Dual LAN, Four COM Ports and Six USB 2.0 Ports
DISPLAY
Chipset Intel® 945GSE GMCH Integrated Intel® GMA 950 graphics PEP-5B1X1
Display Memory Intel® DVMT 3.0 share system memory up to 128MB One PCI-E x1 riser card
Resolution Analog Display: Up to 2048 x 1536 (QXGA)
Digital LVDS: Up to 1600 x 1200(UXGA)
Multi Display 18-bit, dual Channel LVDS / VGA / DVI-D (Chrontel CH7307)

Mini-ITX-WADE-8070 96
Intel® Low Power AtomTM N270 1.6GHz Processor
based Mini-ITX Board with dual display, Gigabit
WADE-8072 Ethernet, Two SATA Ports, Four COM ports and Six
USB Ports

FEATURES
 Intel® AtomTM N270 1.6GHz processor
 Intel® 945GSE and ICH7-M chipset
 One 200-pin SO-DIMM supports single channel DDR2
SDRAM up to 2GB
 Dual display: VGA / LVDS, 3rd display via expansion slot
 Two SATA, one Compact Flash socket & one IDE connector
 One PCI slot, one PCI-E x1 expansion slot and one Mini-
PCIE socket
 Three RS232 ports and one RS232/422/485 port

Built with Intel® mobile 945GSE chipset, WADE-8072 takes advantage SATA, one LPT, one PCI slot and one PCI-Express x1 expansion.
of Intel® AtomTM N270 technologies. WADE-8072 features with its low WADE-8072 is not only a suitable choice for fanless usage but also
power and also can provide dual displays such as VGA and 24-bit the best solution for Mobile POS, Medical, Industrial Control and
LVDS. In addition, WADE-8072 has one SO-DIMM socket which Digital Signage applications.
supports DDR2 SDRAM, dual Gigabit Ethernet, four serial ports, two

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM N270 1.6GHz processor Power Requirement +12V(System) @ 0.35A; +5V(System) @ 2.44A; +3.3V(System)
FSB 533 MHz @ 0.82A
Operating Temperature 0~60°C
BIOS Award BIOS
Operating Humidity 5%~95% non-condensing
System Chipset Intel® 945GSE GMCH and ICH7-M Chipset
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory One 200-pin SO-DIMM supports single channel DDR2 SDRAM
up to 2GB
Storage - 2 x SATA
- 1 x IDE REAR I/O
SSD 1 x Compact Flash share the same channel with IDE and support
RS232/422/485 Gigabit Ethernet
UDMA 5 (At bottom side board edge)
Watchdog Timer Programmable via S/W from 1sec. to 255min. KB/MS
H/W Status Monitor FAN Speed(CPU and System), Temperature(CPU and System),
Voltage, Case open function
GPIO Onboard programmable 8-bit Digital I/Os
Expansion - 1 x PCI slot and one PCI-E x 1 slot
- 1 x TPM pin header
- 1 x Mini-PCIE socket
RS232 VGA
USB Audio
I/O
MIO 1 x IDE, 1 x LPT, 3 x RS232 ports, 1 x RS232/422/485 selectable, SOLDER SIDE
1 x K/M, 1 x Mouse
USB 4 x USB 2.0 ports and 2 x USB 2.0 with header
Audio Interface Mic-in, Line-out CF socket on board edge
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Realtek 8111D)

DISPLAY
Mini-PCIE socket
Chipset Intel® 945GSE GMCH Integrated Intel® GMA 950 graphics
Display Memory Intel® DVMT 3.0 share system memory up to 128MB
Resolution Analog Display: Up to 2048 x 1536 (QXGA) ORDERING GUIDE
Digital LVDS: Up to 1600 x 1200(UXGA)
Multi Display Dual Channel 24-bit output (Chrontel CH7308B) / VGA
WADE-8072
Intel® Low Power AtomTM N270 1.6GHz processor based Mini-ITX Board with dual display,
Gigabit Ethernet, Two SATA ports, Four COM ports and Six USB ports

97 Mini-ITX-WADE-8070
Intel® AtomTM N270 Processor based Mini-ITX Board

WADE-8170 with Dual Display, Dual Gigabit Ethernet, Two SATA


Ports, Two COM ports and Eight USB Ports

FEATURES
 Intel® ATOMTM N270 1.6GHz processor
 Intel® 945GSEand ICH7-M chipset
 12V, 15V~24V DC Power Input
 One 200-pin SO-DIMM supports single channel DDR2
SDRAM up to 2GB
 Dual display: VGA / LVDS / DVI / TV-Out , 3rd display via
riser card
 One PCI expansion slot (Two PCI & one PCI-Expansion x
1 slots via riser card)
 Two SATA, one Compact Flash socket & one IDE
connector

Built with Intel® mobile 945GSE chipset, WADE-8170 takes SDRAM, dual Gigabit Ethernet, two RS232 serial ports, two
advantage of Intel® AtomTM N270 technologies. WADE-8170 SATA, One PCI expansion slot (Two PCI & one PCI-Expansion
features with its low power and also can provide multiple x 1 slots via riser card). Base on 12V & 15V~24V DC power
displays such as LVDS, VGA, TV-out and DVI. In addition, input design, WADE-8170 can be best solution for POS,
WADE-8170 has one SO-DIMM socket which supports DDR2 Medical, Gaming and Digital Signage applications.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® AtomTM N270 1.6GHz processor Power Requirement DC Input
FSB 533 MHz Operating Temperature 0~60°C
BIOS Award BIOS Operating Humidity 5%~95% non-condensing
System Chipset Intel® 945GSE GMCH and ICH7-M Size (L x W) 6.69’’ x 6.69’’ (170mm x 170mm)
System Memory One 200-pin SO-DIMM supports single channel DDR2 SDRAM
up to 2GB
Storage - 2 x SATA
- 1 x 40 pin IDE
SSD 1 x Compact Flash share the same channel with IDE and REAR I/O
support UDMA
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor FAN Speed(CPU and System), Temperature(CPU and System), Gigabit Ethernet
Voltage, Case open function VGA RS232
GPIO Onboard programmable 8-bit Digital I/Os
Expansion 1 x PCI slot, 1 x PCI-Ex1 slot through Riser card

I/O
MIO 1 x EIDE, 2 x RS-232 ports, 1 x K/B, 1 x Mouse,
1 x S-Video header DVI RS232 USB Audio
KB/MS
IrDA N/A
USB 4 x USB 2.0 ports and 4 x USB 2.0 with header
Audio Interface Mic-in, Line-out, Line-in
ORDERING GUIDE
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
WEDE-8170
Intel® AtomTM N270 1.6GHz processor Based Mini-ITX Board with VGA,
18bit LVDS, DVI, Dual LAN, Two COM Ports and Eight USB 2.0 Ports
DISPLAY * Specifications are subject to change without notice.
Chipset Intel® 945GSE GMCH Integrated Intel® GMA 950 graphics * Intel® ATOMTM processor is registered trademarks of Intel® Corporation.
* Other trademarks, logo, brands and company names are the property of
Display Memory Intel® DVMT 3.0 share system memory up to 128MB
their respective owners.
Resolution -Analog Display: Up to 2048 x 1536 (QXGA)
-Digital LVDS: Up to 1600 x 1200(UXGA)
-Digital DVI: Up to 1600 x 1200(UXGA)
LVDS Dual Channel 18-bit
DVI DVI-D interface

Mini-ITX-WADE-8072 98
Ultra Low Voltage Intel® Celeron® M Processor Mini-ITX
WADE-8044 with DDR2 SDRAM, Dual Displays, Four COM Ports
and USB

FEATURES
Intel® Pentium® M / Celeron® M processor
Intel® 910GMLE and ICH6-M chipset
Two 240-pin DIMMs support dual channel DDR2 SDRAM
up to 2GB
Dual Display: VGA / 18bit LVDS
Dual Gigabit Ethernet ports and one PCI slot
One Type II Compact Flash, Four COM Ports and Eight
USB Ports

The WADE-8044 is cost effective Mini-ITX embedded board for ICH6-M chipset, WADE-8044 not only is a fanless solution but
applications that need Dual channel DDR2 memory, Dual Gigabit also can provide dual displays for diversity applications such as
Ethernet ports and expansion PCI slot. With low power Intel® Lottery, Medical, Gaming and Digital Signage.
Pentium® M / Celeron® M processor and Intel® 910GMLE and

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® Pentium® M / Celeron® M processor Power Requirement +12V(System) @ 0.48A; +5V @ 2.85A; +3.3V @ 0.63A
FSB 400 MHz Operating Temperature 0~55°C
BIOS Award BIOS Operating Humidity 5%~95%, noncondensing
System Chipset Intel® 910GMLE GMCH and ICH6-M Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory Two 240-pin DIMMs support dual channel DDR2 SDRAM up Weight 0.94 lbs (0.43 Kg)
to 2GB
Storage - 2 x SATA
- 1 x IDE
SSD 1 x Compact Flash share the same channel with IDE and
support UDMA
REAR I/O
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor FAN Speed (CPU and System), Temperature (CPU and
System), Voltage, Case open function RS232
VGA Gigabit Ethernet
GPIO On-board programmable 8-bit Digital I/O interface
Expansion 1 x PCI slot

I/O
MIO 1 x EIDE, 1 x LPT, 3 x RS232 port, 1 x RS232/422/485
selectable, 1 x K/B, 1 x Mouse KB/MS
DVI-D (optional) USB Audio
IrDA N/A RS232
USB 4 x USB 2.0 ports and 4 x USB 2.0 with header
Audio Interface Mic in, Line out
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
(Realtek 8111B)
WADE-8044
DISPLAY Intel® Pentium® M / Celeron® M processors Based Mini-ITX Board with VGA,
18-bit LVDS, DVI, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports
Chipset Intel® 910GMLE GMCH Integrated Intel® GMA 900 graphics
Display Memory Intel® DVMT 3.0 share system memory up to 128MB WADE-8044-600
Intel® Celeron® M 600MHz (512KB Cache) Based Mini-ITX Board with VGA, 18-
Resolution Analog Display: Up to 2048 x1536 (QXGA)
bit LVDS, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports
Digital LVDS: Up to 1400 x 1050 (SXGA+)
Digital DVI (Optional): Up to 1600 x 1200 (UXGA) (Chrontel WADE-8044-1G
CH7307) Intel® Celeron® M 1.0GHz (Zero Cache) Based Mini-ITX Board with VGA, 18-bit
LVDS Dual Channel 18-bit LVDS, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports

99 Mini-ITX-WADE-8044
On board Dual VGA Intel® Celeron® M / Pentium® M
WADE-8047 Processor Mini-ITX with DDR2 SDRAM, LVDS, Four
COM Ports and USB

FEATURES
Intel® Pentium® M / Celeron® M processor
Intel® 910GMLE and ICH6-M chipset
Two 240-pin DIMMs support dual channel DDR2 SDRAM
up to 2GB
Dual Display: Dual VGA / 18-bit LVDS
Two 10/100mbps LAN and one PCI slot
Two SATA ports, One IDE connector and One Type II
Compact Flash
Four COM Ports and Eight USB Ports

The WADE-8047 is a Mini-ITX embedded board featured its slot. With low power Intel® Pentium® M / Celeron® M processor
onboard dual VGA ports that can deliver better cost effective and Intel® 910GMLE and ICH6-M chipset, WADE-8047 can meet
benefits when choosing display devices for operating. In diversity applications such as Gaming, Lottery, Medical, and
addition, it can also provide LVDS, Dual channel DDR2 memory, Digital Signage.
two SATA ports, two 10/100 BASE-T Ethernet and expansion PCI

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® Pentium® M / Celeron® M processor Power Requirement +12V(System) @ 2.40A; +5V @ 2.97A; +3.3V @ 0.45A
FSB 400 MHz Operating Temperature 0~55°C
BIOS Award BIOS Operating Humidity 5%~95% non-condensing
System Chipset Intel® 910GMLE GMCH and ICH6-M Chipset Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory Two 240-pin DIMMs support dual channel DDR2 SDRAM up Weight 0.95 lbs (0.43 Kg)
to 2GB
Storage - 2 x SATA
- 1 x IDE
SSD 1 x Compact Flash share the same channel with IDE and REAR I/O
support UDMA
Watchdog Timer Programmable via S/W from 1sec. to 255min RS232
H/W Status Monitor FAN Speed(CPU and System), Temperature(CPU and System), Fast Ethernet
Voltage, Case open function KB/MS Audio
GPIO On board programmable 8-bit Digital I/Os
Expansion 1 x PCI slot

I/O
MIO 1 x EIDE, 1 x LPT, 3 x RS232 port, 1 x RS232/422/485 VGA
selectable, 1 x K/B, 1 x Mouse VGA USB
IrDA N/A
USB 4 x USB 2.0 ports and 4 x USB 2.0 ports with header
Audio Interface Mic-in, Line-in ORDERING GUIDE
Ethernet Interface IEEE 802.3 10/100BASE-T Ethernet compliant
(Realtek 8111) WADE-8047
Intel® Pentium® M / Celeron® M processors Based Mini-ITX Board with Dual VGA, 18-bit
LVDS, Dual LAN, Four COM Ports and Eight USB 2.0 Ports
DISPLAY
Chipset Intel® 910GMLE GMCH Integrated Intel® GMA 900 graphics WADE-8047-600
Intel® Celeron® M 600MHz (512KB Cache) Based Mini-ITX Board with Dual VGA, 18-bit
Display Memory Intel® DVMT 3.0 share system memory up to 128MB
LVDS, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports
Resolution Analog Display: Up to 2048 x 1536 (QXGA)
Digital LVDS: Up to 1400 x 1050 (SXGA+) WADE-8047
Second VGA SDVO interface (CH7317)
Intel® Celeron® M 1.0GHz (Zero Cache) Based Mini-ITX Board with Dual VGA, 18-bit
LVDS, Dual GbE LAN, Four COM Ports and Eight USB 2.0 Ports
LVDS 18-bit, dual Channel

Mini-ITX-WADE-8047 100
Leading Intel® Core™ 2 Quad / Core™ 2 Duo Processor
WADE-8180 based Mini-ITX embedded board with Dual Display,
Dual Gigabit Ethernet, SATA, COM and USB

FEATURES
 Intel® CoreTM 2 Quad / CoreTM 2 Duo processor Intel®
Q45 Express and ICH10DO chipset
 Two 240-pin DIMM sockets support dual channel DDR3
SDRAM up to 4GB
 Dual display: VGA / DVI-D, 3rd display via
PCI-Express x16 slot
 Four SATA ports
 Two GbE LAN ports and One PCI-E x16 slot
 RAID 0 / 1 / 5 / 10
 TPM 1.2 and iAMT 5.0 supported

Built with Intel® latest Q45 chipset, WADE-8180 takes advantage simultaneously that suitable for gaming application. With dual
of Intel® Core 2 Quad & Core 2 Duo technologies. With its PCI-E GbE LAN, four SATA, dual COM and eight USB I/O function,
x 16 slot, WADE-8180 offers the availability of extra graphic card WADE-8180 can be the best solution for multiple applications
which can offer powerful graphic processing ability. In addition, such as automation, multi-media and KIOSK.
the VGA and DVI-D dual video outputs can drive two displays

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Quad / CoreTM 2 Duo processor Power Requirement TBD
FSB 1333/1066/800 MHz Operating Temperature 0~60°C
BIOS AMI BIOS Operating Humidity 10%~90%, noncondensing
System Chipset Intel® Q45 Express and ICH10DO chipset Dimension 6.69’’ x 6.69’’ (170mm x 170mm)
System Memory Two 240-pin DIMM sockets support dual channel 800/1066MHz
DDR3 SDRAM up to 4GB
Storage 4 x SATA-300
Watchdog Timer Reset; 1 sec.~255 min. and 1 sec. or 1 min./step
H/W Monitor Monitoring CPU and system temperature, voltage and cooling REAR I/O
fan status
GPIO Onboard programmable 8-bit Digital I/O interface
(4 input / 4 output) VGA Gigabit Ethernet
Expansion One PCI-Express x16 Slot

I/O
MIO 1 x D-SUB 15-pin & 1 x D-SUB 24-pin connector, 2 x RS232
ports, 1 x K/B & Mouse KB/MS USB Audio
IrDA N/A DVI-D RS232
USB 4 x USB 2.0 ports and 4 x USB 2.0 ports with header
Audio Interface Line out, Line-in and Mic-in
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
WEDE-8180
Intel® CoreTM 2 Quad / CoreTM 2 Duo processor Mini-ITX Motherboard
DISPLAY
* Specifications are subject to change without notice.
Chipset Intel® Q45 Integrated Intel® Gen 5.0 GMA 4500 Graphics
* CoreTM 2 Quad and CoreTM 2 Duo processor are registered trademarks
Display Memory Intel® Dynamic Video Memory Technology (Intel® DVMT 5.0) of Intel® Corporation.
Resolution Up to 2048 x1536 @ 75 Hz (QXGA) * Other trademarks, logo, brands and company names are the property
of their respective owners.
DVI DVI-D interface

101 Mini-ITX-WADE-8044
Leading Intel® CoreTM 2 Quad processor based
WADE-8056 Mini-ITX Board with Dual Displays and One GbE

FEATURES
Intel® CoreTM 2 Quad processors
Intel® Q965 GMCH Chipset
Max. 4GB memory, DDR2 SDRAM
Dual Display by VGA/LVDS
One GbE LAN ports and one PCI slot
Max. four COM and six USB 2.0 ports
RAID 0/1/5/10

The WADE-8056 is an advanced mini-ITX embedded system board while maintaining superior image quality. The expansion slots, based
(ESB) that takes advantage of Intel® CoreTM 2 Duo technologies. With on PCI technologies and support up to two PCI slots, which provide
its GPIO, WADE-8056 offers robust computing power and reliability the highly flexibility necessary for functional expansion.
for embedded applications that need a digital control interface. Dual
video outputs can drive two displays simultaneously at a high speed,

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Power Requirement +5V @ 5.1A; +12V(CPU) @ 2.8A; +12V(system) @ 0.7A;
Celeron® D processor +3.3V @ 4.4A
FSB FSB 1066/800/533 MHz Operating Temperature 0~55°C
BIOS Award BIOS Operating Humidity 0%~90% relative humidity, noncondensing
System Chipset Intel® Q965 GMCH & 82801HB ICH8DO Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory 2 x 240-pin dual channel DDR2 SDRAM DIMM 533/667/800 MHz Weight 0.94 lbs (0.43 Kg)
supports up to 4 GB
Storage 4 x Serial ATA connector high-speed data transfers at up to 3 Gb/s
Watchdog Timer Reset; 1 sec.~255 min. and 1 sec. or 1 min./step REAR I/O
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan status. Gigabit Ethernet
Auto throttling control when CPU overheats KB/MS
GPIO On-board programmable 8-bit Digital I/O interface
Expansion 1 x PCI slot; 1 x Mini-PCI

I/O
MIO 4 x RS232, 1 x K/B, 1 x Mouse, 1 x GbE RS232 VGA USB Audio
IrDA N/A
USB 2 x USB 2.0 ports and 4 x USB 2.0 with header
ORDERING GUIDE
Audio Interface Mic in, Line in, Line out
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
WADE-8056
(Intel® 82566DM)
Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Celeron® D processors
Main Board with VGA, Audio, GbE LANs, 6 USB 2.0
DISPLAY EZCool
Chipset Intel® Q965 GMCH Integrated GMA 3000 Graphics device Compact 1U active heatsink suitable for Intel® CoreTM 2 Duo processor
(blow 65W)
Display Memory Intel® DVMT 4.0 supports up to 384 MB video memory
Resolution Analog Display: Up to 2048 x 1536 (QXGA)
PEP-581R/582R
Digital LVDS Display: Up to 1920 x 1200
One/Two slots PCI riser card
LVDS Dual Channel 24-bit PEP-582L
Two slots PCI riser card

Mini-ITX-WADE-8056 102
Leading Intel® CoreTM 2 Quad processor based Mini-ITX
WADE-8556 Board with Dual Displays and One GbE

FEATURES
Intel® CoreTM 2 Quad processors
Intel® Q965 GMCH Chipset
Dual Display by VGA/DVI
One GbE LAN ports, one PCI and one Mini-PCI slot
Max. four COM and six USB 2.0 ports
RAID 0/1/5/10

WADE-8556 is an advanced mini-ITX embedded system board simultaneously, especially suitable for Digital Signage usage.
(ESB) that takes advantage of Intel® CoreTM 2 Quad technologies. The expansion slots, based on PCI technologies and support up
With its Mini-PCI slot, WADE-8556 offers the availability to two PCI slots, which provide the highly flexibility necessary
of an extra wireless LAN card which is suitable for Kiosk for functional expansion.
application. VGA & DVI dual video output can drive two displays

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Power Requirement +5V @ 5.1A; +12V(CPU) @ 2.8A; +12V(system) @ 0.7A;
Celeron® D processor +3.3V @ 4.4A
FSB FSB 1066/800/533 MHz Operating Temperature 0~55°C
BIOS Award BIOS Operating Humidity 0%~90% relative humidity, noncondensing
System Chipset Intel® Q965 GMCH & 82801HB ICH8DO Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory 2 x 240-pin dual channel DDR2 SDRAM DIMM 533/667/800 MHz Weight 0.94 lbs (0.43 Kg)
support up to 4GB
Storage 4 x Serial ATA connector high-speed data transfers at up to
3 Gb/s REAR I/O
Watchdog Timer Reset:1 sec.~255 min. and 1 sec. or 1 min./step
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan
status. Auto throttling control when CPU overheats KB/MS RS232 Gigabit Ethernet
GPIO On-board programmable 8-bit Digital I/O interface
Expansion 1 x PCI slot; 1 x Mini-PCI

I/O
MIO 4 x RS232, 1 x K/B, 1 x Mouse, 1 x GbE
VGA DVI-D USB Audio
IrDA N/A
USB 2 x USB 2.0 ports and 4 x USB 2.0 with header
Audio Interface Mic in, Line in, Line out ORDERING GUIDE
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Intel® 82566DM) WADE-8556
Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Celeron® D processors
Main Board with VGA, Audio, GbE LANs, 6 USB 2.0

DISPLAY
EZCool
Compact 1U active heatsink suitable for Intel® CoreTM 2 Duo processor
Chipset Intel® Q965 GMCH Integreated GMA 3000 Graphics device (blow 65W)
Display Memory Intel® DVMT 4.0 supports up to 384 MB video memory PEP-581R/582R
Resolution Analog Display: Up to 2048 x 1536 (QXGA) One/Two slots PCI riser card
Digital DVI Display: Up to 1920 x 1200
PEP-582L
DVI DVI-D interface Two slots PCI riser card

103 Mini-ITX-WADE-8556
Leading Intel® CoreTM 2 Quad processor based
WADE-8656 Mini-ITX Board with PCI-E expansion and Two GbE

FEATURES
Intel® CoreTM 2 Quad processors
Intel® Q965 GMCH chipset
Six SATA ports support
Two GbE LAN ports, one PCI-E x16 slot
Max. two COM and eight USB 2.0 ports
RAID 0/1/5/10

WADE-8656 is an advanced mini-ITX embedded system board and suitable for gaming application. Six SATA Ports enrich the
(ESB) that takes advantage of Intel® CoreTM 2 Quad technologies. system capacity, especially suitable for Storage usage. Two
With its PCI-E x16 slot, WADE-8656 gets the availability of extra Gigabit Ethernet ports provide high performance for networking
graphic card which can offer powerful graphic processing ability transmission.

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Power Requirement +5V @ 5.1A; +12V(CPU) @ 2.8A; +12V(system) @ 0.7A;
Celeron® D processor +3.3V @ 4.4A
FSB FSB 1066/800/533 MHz Operating Temperature 0~55°C
BIOS Award BIOS Operating Humidity 0%~90% relative humidity, noncondensing
System Chipset Intel® Q965 GMCH & 82801HB ICH8DO Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory 2 x 240-pin dual channel DDR2 SDRAM DIMM 533/667/800 MHz Weight 0.94 lbs (0.43 Kg)
supports up to 4GB
Storage 6 x Serial ATA connector high-speed data transfers at up to
3 Gb/s
Watchdog Timer Reset; 1 sec.~255 min. and 1 sec. or 1 min./step
REAR I/O
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan
status. Auto throttling control when CPU overheats Gigabit Ethernet
GPIO On-board programmable 8-bit Digital I/O interface KB/MS Audio
Expansion One PCI-E x16 slot

I/O
MIO 1 x RS232, 1 x RS232/422/485 selectable, 1 x K/B, 1 x Mouse,
2 x GbE
VGA USB
IrDA N/A RS232/422/485
USB 4 x USB 2.0 ports and 4 x USB 2.0 with header
Audio Interface Mic in, Line in, Line out
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant ORDERING GUIDE
(Intel® 82566DM, Realtek 8111B)
WADE-8656
Intel® CoreTM 2 Quad / CoreTM 2 Duo and Pentium® 4 / Celeron® D
processors Main Board with VGA, Audio, GbE LANs, 8 USB 2.0
DISPLAY
Chipset Intel® Q965 GMCH Integrated GMA 3000 Graphics device EZCool
Display Memory Intel® DVMT 4.0 supports up to 384 MB video memory Compact 1U active heatsink suitable for Intel Core 2 Duo processor (blow 65W)
Resolution Analog Display: Up to 2048 x 1536 (QXGA) PER-4410R
LVDS N/A One slot PCI-E x16 riser card

Mini-ITX-WADE-8656 104
WADE-8055 Network Enriched Intel® CoreTM 2 Duo Processor based
Mini-ITX Board with Dual Displays and Two GbE

FEATURES
Intel® CoreTM 2 Duo / Pentium® 4 / Celeron® D Processor
Intel® 945G and ICH7 Chipset
Two 200pin SO-DIMMs support dual channel DDR2 SDRAM
up to 4GB
Four SATA ports support
Two GbE-LAN ports and one PCI slot
Max. two COM and eight USB 2.0 ports
All capacitors are solid type

WADE-8055 is an industrial–grade Mini-ITX board with best C/P run with Celeron® 440 35W processor without any fan.
ratio. The LGA775 CPU socket enables WADE-8055 to support Moreover, all solid type capacitors enhance the durability,
wide range processors, such as Intel® CoreTM 2 Duo, Pentium® 4 stability and reliability of the board as well.
or Celeron® CPUs. With special heatsink design, WADE-8055 can

SYSTEM MECHANICAL & ENVIRONMENTAL


CPU Intel® CoreTM 2 Duo / Pentium® 4 / Celeron® D processor Power Requirement [email protected] ; [email protected] ; +12V(system)@0.48A ;
[email protected]
FSB FSB 1066/800/533 MHz
Operating Temperature 0~55°C
BIOS Award BIOS
Operating Humidity 0%~90% relative humidity, noncondensing
System Chipset Intel® 945G and ICH7 Chipset
Size (L x W) 6.69” x 6.69” (170 mm x 170 mm)
System Memory 2 x 200-pin DDR2 SO-DIMM socket support up to 4GB
dual channel 667/533 MHz Weight 0.94 lbs (0.43 Kg)
Storage Support 4 SATA 300 drives
SSD 1 x Compact Flash
REAR I/O
Watchdog Timer Reset:1 sec.~255 min. and 1 sec. or 1 min./step
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan
status. Auto throttling control when CPU overheats Gigabit Ethernet
RS232
GPIO On-board programmable 8-bit Digital I/O interface
USB
Expansion 1 x PCI slot

I/O
MIO 1 x RS232, 1 x RS232/422/485 selectable
VGA USB Audio
IrDA N/A RS232/422/485
USB 6 x USB 2.0 ports and 2 x USB 2.0 with header
Audio Interface Mic in, Line in, CD Audio in, Line out
ORDERING GUIDE
Ethernet Interface IEEE 802.3 10/100/1000BASE-T Gigabit Ethernet compliant
(Realtek 8111C x2)
WADE-8055
Intel® CoreTM 2 Duo / Pentium® 4 / Celeron® D processors Mini-ITX Board
DISPLAY PEP-581R/582R
Chipset Intel® 945G GMCH One/Two slots PCI riser card
Display Memory Integrated Intel® Graphics Media Accelerator GMA 950, and PEP-582L
share system memory to 224 MB
Two slots PCI riser card
Resolution Analog Display: Up to 2048 x 1536 (QXGA)
LVDS N/A
EZCool
Compact 1U active heatsink suitable for Intel® CoreTM 2 Duo processor
(blow 65W)

105 Mini-ITX-WADE-8056
WADE-2221A Rugged and Stylish Industrial Mini-ITX Bare
Bone System

The WADE-2221A is a rugged and stylish barebone system This barebone system includes a WADE series board, 150-watt
suitable for embedded applications that stand alone or are or 180-watt power supply, 2.5" drive bay and one PCI expansion
rackmounted. Its effective ventilation is achieved by the mesh slot. A 2U rackmount tray is specially designed to hold two units
design of the front panel. No actual tool is needed to release the side-by-side and converts them to the rackmount platform.
top cover of chassis, simplifying integration and field service.

FEATURES REAR I/O


 Integrated with various Mini-ITX board
 One PCI expansion slot LAN Audio Ports

 Tool-free mechanism to open the top cover


 Rugged and stylish design
 Quick 2.5” HDD installation by releasing the
top cover
 Built-in VGA/LAN/USB/COM ports
 Two side-by-side units to form two systems
in 2U rackmount form factor
COM1 VGA
KB/MS 2 USB Ports

POWER SUPPLY FSP150-50PLA optional


Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 5A@115V, 3A@230V
Efficiency >68%
ORDERING GUIDE
Holdup Time 20ms. at full load@25°C WADE-2221A-150X
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V Rugged and stylish industrail Mini-ITX Bare-bones Chassis with 150W
active PFC PSU
Over Power/Load Output power over to 110%~140%
Protection WADE-2221A-180X
MTBF 100,000 hrs Rugged and stylish industrail Mini-ITX Bare-bones Chassis with 180W
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
active PFC PSU
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -40 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 251 x 221.8 x 86.3 (mm)
Weight 3.5 Kg

Mini-ITX-WADE-2221A 106
WADE-1120A The fan-less compact bare bone system with
Intel® Celeron® M Mini-ITX board

The WADE-1120A is designed to efficiently dissipate any Mini-ITX board as the barebone system. Its unique tool-free
internal heat, eliminating the need for a ventilation fan. It is design allows the integrator or field service professional
the perfect system solution for any embedded application to release the top cover easily and quickly. Complete with
that operates in a harsh environment. WADE-1120A is memory, DOM or Compact flash, WADE-1120A is ready to go
designed with either a built-in WADE-8041 board or similar to work.

FEATURES REAR I/O


 Integrated with WADE-8041 or similar Mini-ITX board
 Small form factor with fan-less ventilation mechanism COM1
COM2, COM3 LAN
 Rugged design for harsh environment
 Unique tool-free design for quick top cover release

VGA USB
KB/MS Audio COM4

POWER SUPPLY FSP055-50LM optional


Maximum Output 55W ATX power supply
Input Voltage 90V ~ 265V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 2.0A(RMS)@115V, 1.0A(RMS)@230V
Efficiency >74%
ORDERING GUIDE
Holdup time 17ms. at 115V/60Hz or 230V/50Hz
Over Voltage Protection [email protected]~4.5V; [email protected]~6.82V; [email protected]~16.5V WADE-1120A-40X
MTBF 121,330 hrs The Fan-free Designed Compact Node Chassis built with 40W ATX PSU
Certification UL, cUL, TUV, CE, FCC WADE-1120A-55X
Dimension (WxDxH) 183x50x37.6 mm; 7.2”x2”x1.5” The Fan-free Designed Compact Node Chassis built with 55W ATX PSU

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 278 x 200 x 44 (mm)
Weight 2~2.5 Kg

107 Mini-ITX-WADE-1120A
WADE-2231Q Rugged and Stylish Industrial Mini-ITX Bare
Bone Chassis with 180W Active PFC PSU

The WADE-2231Q is a rugged and stylish barebones system top cover of chassis, simplifying integration and field service.
suitable for embedded applications that stand alone or are This barebone system includes a WADE series board, 180-watt
rackmounted. Its effective ventilation is achieved by the mesh power supply, 3.5" drive bay and one PCI expansion slot.
design of the front panel. No actual tool is needed to release the

FEATURES REAR I/O


 Bare-bones Chassis for Mini-ITX board
 Tool-free mechanism to open the top cover
COM LAN
 Rugged and stylish design
 Quick 3.5” HDD installation by releasing the top cover

VGA Audio
POWER SUPPLY FSP180-50PLA optional USB
KB/MS
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 5A@115V, 3A@230V
Efficiency >68%
Holdup Time 20ms. at full load@25°C
ORDERING GUIDE
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V
Over Power/Load Output power over to 110%~140% WADE-2231Q-150X
Protection Rugged and stylish industrail Mini-ITX Bare-bones Chassis with 150W
MTBF 100,000 hrs active PFC PSU
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO WADE-2231Q-180X
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH Rugged and stylish industrail Mini-ITX Bare-bones Chassis with 180W
Storage: -40 ~ 70°C, 10m ~ 90%RH active PFC PSU (CoreTM 2 Quad Solution)
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 310 x 252 x 86.3 (mm)
Weight 3.5 Kg

Mini-ITX-WADE-2231Q 108
ARTO-220-ITX 1.5U Advanced Mini-ITX based chassis for Mini-
ITX M/B application

The compact and slim ARTO-220-ITX is design to fit Mini-ITX field service. The barebone system includes a WADE series
MB applications operating where space is at a premium. It board, 3.5” drive bay, one PCI expansion slot and a 250-watt
also features a tool-free mechanical design to quickly re- power supply.
lease the top cover of the chassis for ease of integration and

FEATURES REAR I/O


 Bare-bones chassis for Mini-ITX board
 Comptact, slim and stylish ID design Audio Ports
LAN
 One 3.5” HDD bay and 250W PSU
 One PCI expansion slot

COM VGA
KB/MS 2 USB Ports
POWER SUPPLY FSP250-50PLB optional
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 5A@115V, 3A@230V
Efficiency >68%
Holdup Time 17ms. at full load@25°C ORDERING GUIDE
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V
ARTO-220-ITX-250X
Over Power/Load Output power over to 110%~160%
Protection
1.5U Advanced Mini-ITX based Chassis with 250W Active PFC PSU
MTBF 105,405 hrs
EMI & Safety Approval UL, cUL, TVU, CE, FCC
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -20 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 100x190x40.5 mm; 3.9”x7.5”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 374 x 241 x 74 (mm)
Weight 6.5 Kg

109 Mini-ITX-ARTO-220-ITX
WADE-1042 1U Height bare bone server with four drive
bays for RAID and two expansion slots

The WADE-1042 uses a 1U rack-mount form factor and is faces on the board. Applications will benefit from WADE-1042’s
designed for network or communication applications. Its four compact size, expansion capability, RAID configuration and
drive bays support RAID configuration through the SATA inter- 250-watt power supply.

FEATURES REAR I/O


 Bare-bones chassis for Mini-ITX board
LAN
 Comptact, slim and stylish ID design
Parallel
Switch
 Four 3.5” HDD bays and 180W PSU Audio
 Two PCI expansion slot

COM VGA
USB PCI
KB/MS
POWER SUPPLY FSP220-60LE optional
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 5A@115V, 3A@230V
ORDERING GUIDE
Efficiency >68%
Holdup Time 20ms. at full load@25°C WADE-1042-220X
Over Voltage Protection [email protected]~6.8V; [email protected]~4.8V; [email protected]~15.6V Advance Mini-ITX based Chassis for Rack-Mount with 180W Active PFC PSU
Over Power/Load Output power over to 110%~140%
Protection
MTBF 100,000 hrs
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -40 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 432 x 380 x 44 (mm)
Weight 8.5 Kg

Mini-ITX-WADE-1042 110
WADE-1181 Compact Low Profile Mini-ITX Bare Bone Chassis
with 1-slot PCI Expansion

A wider version Mini-ITX barebone chassis that provides expansion could be capture card for DSS application or serial
essential expansion capability for function that is not covered port card for data acquisition in factory.
by the embedded Mini-ITX board. The provided 1-slot PCI

FEATURES REAR I/O


 Support Mini-ITX embedded board
 Hard drive bay for internal 2.5” hard drive (project based
to support 3.5” hard drive without PCI expansion)
Power Switch
 Include 150W Active PFC power supply
 Customized label of front panel and rear I/O bracket are
welcome
 Dual USB ports and Power LED indication on front panel

150W Active PFC PSU

POWER SUPPLY FSP150-50PLA optional


*Flexible rear I/O panel design
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
Input Current 5A@115V, 3A@230V
ORDERING GUIDE
Efficiency >68%
Holdup Time 20ms. at full load@25°C WADE-1181-150X
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V Advance Mini-ITX based Chassis with 1-slot PCI expansion for Desktop
Over Power/Load Output power over to 110%~140% (1U High) with 150W Active PFC PSU
Protection
MTBF 100,000 hrs
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -40 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 370 x 231 x 44.4 (mm)
Weight 3.2 Kg

111 Mini-ITX-WADE-1181
WADE-1141 Compact Low Profile Mini-ITX Bare Bone Chassis

Mini-ITX adoption of embedded applications is non stop trend of durable Mini-ITX barebone chassis meets the request perfectly.
industries. A compact, easy installation and low price demanding Standard chassis yet customerized front panel label makes it
barebone chassis is urgently inquiry. WADE-1141, not fancy but special for your project.

FEATURES REAR I/O


 Support Mini-ITX embedded board
 Hard drive bay for internal 2.5” hard drive (3.5” drive
bay by project) Power Switch
 Include 150W Active PFC power supply
 Customized label of front panel and rear I/O bracket
are welcome
 Dual USB ports and Power LED indication on front
panel

FSP150-50PLA optional 150W Active PFC PSU


POWER SUPPLY
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz *Flexible rear I/O panel design
Input Current 5A@115V, 3A@230V
Efficiency >68%
Holdup Time 20ms. at full load@25°C
ORDERING GUIDE
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V
WADE-1141-150X
Over Power/Load Output power over to 110%~140%
Advanced Mini-ITX based Chassis for Desktop (1U High) with 150W
Protection
Active PFC PSU
MTBF 100,000 hrs
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -40 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 275 x 231 x 50(mm)
Weight 2.5 Kg

Mini-ITX-WADE-1141 112
WADE-2110 Cubic Mini-ITX Bare Bone Chassis with
Front Accessable Hard Drive Bay

Install hard drive or maintance is terrible work for system get away from the nightmare. The 2U height barebone chassis
assembly or field maintance technicians. To easy their works can be fix in 19” cabinet with special carrier for having dual
and minimumized down time of valueable running system, the systems in 2U space.
WADE-2110 provides one front accessable 3.5” hard drive bay to

FEATURES REAR I/O


 Support Mini-ITX embedded board
 Front accessable 3.5” SATA hard drive bay Power Switch
 Include 150W Active PFC power supply
 Able to install dual systems in 19” rack with special
carrier
 Dual USB ports and Power LED indication on front
panel

POWER SUPPLY FSP150-50PLA optional


150W Active PFC PSU
Input Voltage 90V ~ 264V AC, full range
Input Frequency 47 ~ 63 Hz
*Flexible rear I/O panel design
Input Current 5A@115V, 3A@230V
Efficiency >68%
Holdup Time 20ms. at full load@25°C
Over Voltage Protection [email protected]~6.5V; [email protected]~4.5V; [email protected]~+5.6V
ORDERING GUIDE
Over Power/Load Output power over to 110%~140%
Protection WADE-2110-150X
MTBF 100,000 hrs Advance Mini-ITX based Chassis with front accessable hard drive bay and
150W Active PFC PSU
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO, NEMCO, DIMCO
Temperature/Humidity Operating: 0 ~ 50°C, 20 ~ 85%RH
Storage: -40 ~ 70°C, 10m ~ 90%RH
Dimension (WxDxH) 150x81.6x40.6 mm; 5.9”x3.2”x1.6”

MECHANICAL & ENVIRONMENTAL


Operation Temperature 0~50°C
Storage Temperature -20~80°C
Relative Humidity 5~95% non-condensing
Dimension 215 x 231 x 88.5 (mm)
Weight 3.0 Kg

113 Mini-ITX-WADE-2110
Riser Card Selection Guide
WADE ESB Riser Card WADE-2221A ARTO-220-ITX WADE-2232Q

PER-4210R

PEP-581R
WADE-8066
PEP-582R

PEP-5311R

PEP-581R

WADE-8056 PEP-582R

PEP-5311R

PEP-581R

WADE-8556 PEP-582R

PEP-5311R

WADE-8656 PER-4410R

PEP-581R

WADE-8065 PEP-582R

PEP-5311R

PEP-581R

WADE-8055 PEP-582R

PEP-5311R

PEP-581R

WADE-8044 PEP-582R

PEP-5311R

Mini-ITX-Riser Card Selection Guide 114


Modular Computing Solutions

Modular computing platforms


Compact size, computing power options, reliability, ease of use, and function
expansion are the key design considerations for every embedded application.
Modular computing boards have been defined and developed in order to satisfy these
design needs. The modular computing approach is to condense the fundamental
computer functions into a compact module that includes an interface for additional
function expansion.

The PC/104, PC/104+, and EBX (Embedded Board eXpandable) are some
traditional form factors of modular computing boards in the market place. The ETX
(Embedded Technology eXtended) form factor has been created in recent years with
greater computing power, smaller size, and extended expansion capability. In 2005, the ETX was imbued with latest interface
technologies such as PCI Express and SATA. Due to the simplicity of its circuit design, balanced computing power, and I/O
bandwidth, the ETX standard evolved into COM Express -- one of the PICMG (PCI Industrial Computer Manufacturer Group)
standards.

 COM Express
The COM Express form factor includes a bootable host computer modular board that is connected with its carrier board through
the PCI Express interconnection. The PCI Express Technology enables the data transmission from parallel to serial. The
advantage of such architecture is higher I/O density and greater performance.
The module, bootable host computer "engine" is packaged as an off-the-shelf board and plugged into a "carrier board," which is
implemented with I/Os and also connects to the power supply. The application-specific system functions and peripheral expansion
are all built on the carrier board.

 QSEVEN
The QSEVEN form factor measures a mere 70 x 70 mm, making it smaller than most of other modules in the market place. The
QSEVEN Consortium defined the mechanical and electrical interfaces so that hardware vendors and system integrators can build
and integrate compliant components, signal devices, and systems.
The high density, compact size and latest interfaces -- as well as the expandability to meet the latest serial transmission interface,
such as PCI Express, SATA, Gigabit Ethernet and SDVO interface - benefit many applications in the embedded market, including
industrial control and small form factor applications.

 ETX
The ETX form factor is build from early 2000 for standardized module computing purpose. It includes the common PC functions
such as VGA, USB, Keyboard, Mouse, Serial/Parallel Port, IDE and Fast Ethernet. In addition, its PCI and ISA interfaces are
industrial standard that can support versatile applications and different kinds of peripheral devices. While it is an early modular
concept and has been adopted for a long time, the latest and powerful chipsets technology still brings this form factor higher
performance.

115 Modular Computing Solutions


Intel® CoreTM Duo & Solo processor based Type

PCOM-B211VG II COM Express module with DDR2 SDRAM,


VGA, Gigabit Ethernet, SATA 300 and USB

Active Heat Sink

Passive Heat Sink

FEATURES GENERAL
® Processor CPU & Package: Intel® CoreTM Duo or Solo processor in mFCPGA package
 Intel 945GME based module supports Core FSB: 667/533MHz
Solo or Core Duo processors
Chipset/Core Logic Intel® 945GME and ICH7MDH
 Accept both Intel® socket type and BGA type
System Memory Up to 2GB DDR2 667/533/400 SDRAM on one 200-pin DIMM socket
processors for intensive computing power or
fan-less applications BIOS Award BIOS

 Plug-n-run with the carrier boards and Storage Devices EIDE: Support one EIDE channel with Ultra DMA 100/66/33
SATA: Support Two SATA 150 drives
speeds up time-to market
Solid State Disk N/A
 SATA interface to support faster transfer rate
Watchdog Timer N/A
in storage devices
Expansion Interface - One PCI Express x16, multiplexed with SDVO interface
 Maximum 2GB DDR2 memory - Five PCI Express x1
- Four PCI devices
- LPC interface
- High definition audio interface

Hardware Monitoring CPU temperature

Dimension Dimension : 125(L) x 95(W) mm; 4.9"(L) x 3.7" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

ORDERING GUIDE I/O


MIO N/A
Standard PCOM-B211VG IrDA N/A
Intel ® CoreTM Duo or Solo processor based
Ethernet One Gigabit Ethernet (Intel® PC82573L)
Type II COM Express module with DDR2
SDRAM, VGA, Gigabit Ethernet and USB Audio N/A
Optional Active Heat Sink USB USB 2.0 x 8
Heat sink for both PCOM-210/211 with socket
type processor Keyboard & Mouse N/A

Passive Heat Sink


Heat sink for both PCOM-210/211 with low
power consumption on-board processor DISPLAY
Graphic Controller Intel® 945GME integrated Intel® Graphics Media Accelerator 950
(Intel® GMA 950)

Graphic Memory Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share
system memory up to 128MB

Display Interface - Support CRT, LVDS and TV-out display interfaces


- CRT display resolution QXGA

Modular-PCOM-B211VG 116
Intel® CoreTM 2 Duo or Celeron® M processor

PCOM-B212VG based Type II COM Express module with DDR2


SDRAM, VGA, Gigabit Ethernet and USB

200-pin DIMM sockets

Socket P

Active Heat Sink


Intel® ICH8M

Intel® GME965

Passive Heat Sink

FEATURES GENERAL
® TM Processor CPU & Package: Intel® CoreTM 2 Duo or Celeron® M processor FCPGA package
 The Intel Core 2 Duo processor brings FSB: 533/800MHz
dual-core technology and provides
Chipset/Core Logic Intel® GME965 and ICH8M
significant performance improvement.
System Memory Up to 4GB DDR2 533/667 SDRAM on two 200-pin DIMM socket
 The Intel® GME965 integrated GMA X3100
graphic provides better performance and BIOS Award BIOS
variable display interfaces. EIDE: Support one EIDE channel with Ultra DMA 100/66/33
Storage Devices
SATA: Support three SATA 300 drives
 Design to comply with both socket type and
BGA type CoreTM 2 Duo & Celeron® M Solid State Disk N/A
processor for intensive computing Watchdog Timer N/A

 Architecture of module and carrier boards Expansion Interface - One PCI Express x16, multiplexed with SDVO interface
speeds up time-to-market of tailor-made - Five PCI Express x1
- Four PCI devices
equipment - LPC interface
- High definition audio interface
 Equipped with single PCI Express x1
interface based Gigabit Ethernet Hardware Monitoring CPU Voltage and Temperature

Dimension Dimension : 125(L) x 95(W) mm; 4.9"(L) x 3.7" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

I/O
MIO N/A

IrDA N/A

ORDERING GUIDE Ethernet One Gigabit Ethernet Controller (Intel® WG82574L)

Audio N/A
Standard PCOM-B212VG
USB Eight USB ports
Intel ® CoreTM 2 Duo or Celeron® M processor
based Type II COM Express module with Keyboard & Mouse N/A
DDR2 SDRAM, VGA, Gigabit Ethernet and
USB

DISPLAY
Graphic Controller Intel® GME965 integrated Graphics Media Accelerator X3100
(Intel® GMA X3100)

Graphic Memory Dynamic share system memory up to 384MB (Intel® DVMT 4.0)

Display Interface - Support CRT, LVDS, TV-out, and SDVO display interfaces
- CRT display resolution up to 2048x1536 @ 85Hz refresh

117 Modular-PCOM-B212VG
Intel® GM45 platform based Type II COM Express

PCOM-B213VG module with DDR3 SDRAM, VGA, Gigabit


Ethernet, SATA and USB

204-pin SODIMM sockets

Socket P

Active Heat Sink


Intel® GM45
®
Intel ICH9M-E

Passive Heat Sink

FEATURES GENERAL
® TM TM Processor CPU & Package: Intel® 45nm CoreTM 2 Quad/Core 2 Duo FSPGA package
 The Intel 45nm Core 2 Quad/Core 2 FSB: 667/800/1066MHz
Duo processor features dual core/quad core
Chipset/Core Logic Intel® GM45 and ICH9M-E
technology that provides latest
semiconductor technology System Memory Up to 8GB DDR3 667/800/1066 SDRAM on two SODIMM socket
®
 Intel GM45 integrated GMA 4500MHD BIOS AMI BIOS
graphic provides extreme 3D performance EIDE: Support one EIDE channel with Ultra DMA 100/66/33
Storage Devices
for media applications SATA: Support Four SATA 300 drives

 Intel® GM45 platform brings latest iAMT 4.0 Solid State Disk N/A
and ITPM for powerful management and Watchdog Timer N/A
cryptal functions
Expansion Interface - One PCI Express x16, multiplexed with SDVO interface
 Architecture of module and carrier boards - Five PCI Express x1
- Four PCI devices
speeds up time-to-market of tailor-made - LPC interface
equipment - High definition audio interface

 Support two SODIMM socket and up to 8GB Hardware Monitoring CPU Voltage and Temperature
memory size Power Requirement TBA

Dimension Dimension : 125(L) x 95(W) mm; 4.9"(L) x 3.7" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

ORDERING GUIDE
I/O
Standard PCOM-B213VG MIO N/A
Intel ® GM45 platform based Type II COM
IrDA N/A
Express module with DDR3 SDRAM, VGA,
Gigabit Ethernet and USB Ethernet One Gigabit Ethernet Controller (Intel® WG82567LM)

Audio N/A

USB Eight USB ports

Keyboard & Mouse N/A

DISPLAY
Graphic Controller Intel® GM45 integrated Graphics Media Accelerator 4500MHD
(Intel® GMA 4500MHD)

Graphic Memory Dynamic share system memory (Intel® DVMT 5.0)

Display Interface - Support CRT, LVDS, TV-out and SDVO display interfaces
- CRT display resolution up to 2048x1536 @ 85Hz refresh

Modular-PCOM-B213VG 118
Intel® AtomTM based Type II COM Express

PCOM-B214VG module with DDR2 SDRAM, VGA, Gigabit


Ethernet, SATA and USB

200-pin SO-DIMM socket

Intel® AtomTM N270

Active Heat Sink


Intel® ICH7M

Intel® 945GSE

Passive Heat Sink

FEATURES GENERAL
® TM Processor CPU & Package: Intel® AtomTM N270 1.6GHz in FCPGA package
 The Intel Atom N270 and 945GSE platform FSB: 533MHz
that provides cost effective solution
Chipset/Core Logic Intel® 945GSE and ICH7M
technology
System Memory Up to 2GB DDR2 533 SDRAM on one SO-DIMM socket
 Intel® AtomTM N270 + 945GSE + ICH7M
platform brings under 10W TDP solution for BIOS Award BIOS
easy fan-less applications EIDE: Support one EIDE channel with Ultra DMA 100/66/33
Storage Devices
SATA: Support two SATA 150 drives
 SATA and IDE interface provide best cost
effective functions for market Solid State Disk N/A

Watchdog Timer N/A


 Architecture of module and carrier boards
speeds up time-to-market of tailor-made Expansion Interface - One SDVO port
equipment - Three PCI Express x1
- Four PCI devices
 Support one SODIMM socket and up to 2GB - LPC interface
- AC'97/High definition audio interface
memory size
Hardware Monitoring CPU temperature

Dimension Dimension : 125(L) x 95(W) mm; 4.9"(L) x 3.7" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

I/O
MIO N/A

IrDA N/A

Ethernet One Gigabit Ethernet Controller (Intel® WG82574L)


ORDERING GUIDE Audio N/A

USB Eight USB ports


Standard PCOM-B214VG
Intel ® AtomTM processor based Type II COM Keyboard & Mouse N/A
Express module with DDR2 SDRAM, VGA,
Gigabit Ethernet and USB

DISPLAY
Graphic Controller Intel® 945GSE integrated Graphics Media Accelerator
(Intel® GMA 950)

Graphic Memory Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share
system memory up to 128MB

Display Interface - Support CRT, LVDS, TV-out and SDVO display interfaces
- CRT display resolution up to 2048x1536@85Hz refresh

119 Modular-PCOM-B214VG
Intel® ATOM based Type II micro-COM Express

PCOM-B215VG module with DDR2 SDRAM, VGA, Gigabit


Ethernet, SATA, USB and NAND Flash

SODIMM sockets

Intel® ATOMTM N450/D510


Intel® ICH8M

ATA 4GB Solid State Drive

GENERAL
FEATURES Processor CPU: Intel® ATOM N450/D510 in FCBGA package
- N450
 The Intel® ATOM N450(Pineview-M) / D410 - D510
(Pineview-D, Single core) D510(Pineview-D,
Chipset/Core Logic Intel® ICH8M
Duo core) and ICH8M platform that provides
cost effective solution with low power and System Memory Supports up to 4GB DDR2 667 SDRAM on one SODIMM
duo core processor technology BIOS AMI BIOS
 Intel® Pineview-M / Pineview-D can be Storage Devices IDE: Support one IDE channel with Ultra DMA 100/66/33
supported on the same compact board SATA: Support three SATA 300 drives

Solid State Disk On-board ATA 4GB Solid State Drive, up to 8G Byte
 Support five PCI Express lanes, four x1
lanes can be configured to one x4 lane Watchdog Timer N/A

Expansion Interface - Five PCI Express x1 lanes of which four x1 lanes can be configured to one
 On-board ATA 4GB Solid State Drive, up to x4 lane
8G Byte - Four PCI devices
- LPC Interface
 Support one DDR2 533/667MHz SDRAM, - AC97 / High definition audio interface
up to 4GB memory size CPU Temperature
Hardware Monitoring
 Support MPEG2 Decode in HW Power Requirement TBA

Dimension Dimension : 70(L) x 70(W) mm; 2.75"(L) x 2.75" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%

I/O
MIO N/A

IrDA N/A

Ethernet One Gigabit Ethernet Controller (Realtek RTL8111C-VC-GR)


ORDERING GUIDE Audio N/A

USB Eight USB ports


Standard PCOM-B215VG
Intel ® ATOM based Type II micro-COM Express Keyboard & Mouse N/A
module with DDR2 SDRAM, VGA, Gigabit
Ethernet, SATA, USB and NAND Flash
DISPLAY
* Specifications are subject to change without notice.
Graphic Controller - N450 integrated Generation 2.5 graphics, supports DX9 Graphics up to
* Celeron M® and Pentium® M are registered trademarks of Intel
200MHz
Corporation. - D510 integrated Generation 3.5 graphics, supports DX9 Graphics up
* Other trademarks, logo, brands and company are the property to 400MHz
of their respective owners.
Graphic Memory Dynamic share system memory up to 256MB (Intel® DVMT 4.0)

Display Interface - Support CRT, 1x 18bit LVDS display interfaces


- Resolution:
CRT display: Pineview-M: up to 1400 x 1050 @ 60Hz refresh
Pineview-D: up to 2048 x 1536 @ 60Hz refresh
LVDS display: Pineview-M: up to 1280 x 800
Pineview-D: up to 1366 x 768

Modular-PCOM-B215VG 120
Intel® Arrandale processor based Type II COM

PCOM-B216VG Express module with DDR3 SDRAM, VGA


Gigabit Ethernet 3. 0 GT/s SATA and USB

204pin DDR3 SODIMM socket

Intel® QM57
Intel® Arrandale processor

FEATURES GENERAL
® Processor CPU & Package: Intel® 45nm Arrandale Core i7/i5/i3 or Celeron P4505
 The Intel Arrandale and QM57 platform with processor up to 2.53 GHz with 4MB Cache in FC-BGA package
turbo boost technology to maximize CPU & DMI x4 Link: 4.8GT/s (Full-Duplex)
Graphic performance Intel® QM57
Chipset/Core Logic
 Intel® Arrandale platform support variously System Memory Up to 8GB DDR3 800/1066 SDRAM on two SODIMM sockets
powerful processor from ultra low power to
BIOS UEFI AMI BIOS
mainstream performance type
Storage Devices SATA: Four SATA 300 drivers; IDE:one EIDE channel with Ultra DMA
 Supports Intel® intelligent power sharing 100/66/33
technology to reduce TDP (Thermal N/A
Solid State Disk
Design Power)
Watchdog Timer N/A
 Enhance Intel® vPro efficiency by Intel®
Expansion Interface - One PCI Express x16
82577LM GbE PHY and AMT6.0 - Four PCI devices
technology - Six PCI Express x1
- LPC & SPI Interface
 Support two DDR3 800/1066 SDRAM on - High definition audio interface
two SODIMM sockets, up to 8GB memory CPU Voltage and Temperature
Hardware Monitoring
size
Power Requirement TBA

Dimension Dimension: 125(L) x 95(W) mm

Environment Operation Temperature: 0~60 °C


Storage Temperature: -20~80 °C
Operation Humidity: 5~90%

ORDERING GUIDE I/O


MIO N/A
Standard PCOM-B216VG
IrDA N/A
Intel ® Arrandale processor based Type II COM
Express module with DDR3 SDRAM, VGA, Ethernet One Intel® 82577LM Gigabit Ethernet PHY
Gigabit Ethernet, 3.0GT/s SATA and USB
Audio N/A
CPU Intel ® Core i7-610E SV (4M Cache, 2.53 GHz) USB Eight USB ports
Support List Intel® Core i7-620LE LV (4M Cache, 2.00 GHz) N/A
Intel ® Core i7-620UE ULV (4M Cache, 1.06 GHz) Keyboard & Mouse
Intel ® Core i5-520E SV (3M Cache, 2.40 GHz)
Intel ® Core i3-330E SV (3M Cache, 2.13 GHz) DISPLAY
Intel ® Celeron P4505 SV (2M Cache, 1.86 GHz)
Graphic Controller Intel® Arrandale integrated Graphics Media Accelerator
* Specifications are subject to change without notice. (Gen 5.75 with 12 execution units)
* Arrandale Core i7 / i5 / i3 and Celeron are registered trademarks Dynamic share system memory over 512MB (Intel® DVMT 5.0)
Graphic Memory
of Intel Corporation.
* Other trademarks, logo, brands and company are the property Display Interface - Support CRT, LVDS, and PEG interfaces
of their respective owners. - CRTdisplay resolution up to 2048x1536@85Hz refresh

121 Modular-PCOM-B216VG
PCOM-C210 ATX Form Factor Evaluation Carrier Board For COM
Express Type II Module

Gigabit Ethernet & Dual USB ports COM port


Dual USB ports VGA port
Parallel port
Audio

PS/2 Keyboard / Mouse

Four PCI Expansion


slots
LVDS port

Six PCI-E x1 slots

PCOM-C210 with PCOM module


FDD port CF Socket
PCI-E x16 slot
IDE channel Rear I/O
Four SATA ports

FEATURES GENERAL
 COM Express carrier board accepts Portwell Com Express Module Portwell Type II COM Express Module
Type II COM Express modules BIOS Award BIOS (or BIOS on COM Express Module)
 ATX form factor to meet most standard Storage Devices EIDE: Two EIDE devices with Ultra DMA 100/66/33
mounting space and provide more SATA: Four SATA ports
expansions slots Solid State Disk One Type II CF socket

 On-board power and reset switches benefit Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.
engineering testing or evaluation without a Expansion Interface Four PCI, six PCI Express x1 and one PCI Express x16 expansion slots
chassis (availability based on COM Express module)

 2 EIDE, 4 SATA, 4 PCI, 6 PCI-E x1 and 1 Dimension Dimension : 304.8(L) x 243.8(W) mm; 12"(L) x 9.6" (W)
PCI-E x16 Environment Operating Temperature: 0 to 60oC
Storage Temperature: -20 to 80oC
 Allow user to select master BIOS on board Relative Humidity: 5% to 90%, non-condensing
or from CPU module

I/O
MIO RS232 x1, one FDD channel and one parallel port

IrDA N/A

Ethernet - Single 10BASE-T/100BASE-TX/1000BASE Ethernet


- Single RJ-45 connector with two LED indicators at rear I/O panel

Audio High Definition Audio

USB USB 2.0 x 6 (Dual ports at rear I/O panel; four ports internal)
ORDERING GUIDE Keyboard & Mouse PS/2 keyboard & mouse

Standard PCOM-C210
ATX Form Factor Evaluation Board For COM
Express Type II Module DISPLAY
Graphic Controller Depends on selected PCOM Module

Graphic Memory Depends on selected PCOM Module

Display Interface Support VGA, LVDS interfaces with dual display capability

Modular-PCOM-C210 122
Qseven, based on Intel® AtomTM Processor with

PQ7-M101G DDR2 SDRAM, LVDS Display, Gigabit Ethernet,


SDVO and SATA

Intel® US15W SCH

512MB or 1GB DDR2 Memory

2 SATA Ports

Intel® AtomTM Z510/530


Realtek 8111B GbE

* Actual Size

FEATURES GENERAL
TM Processor Intel® AtomTM Processor Z510/Z530
 Atom Z510 (1.1GHz) or Z530 (1.6GHz)
Chipset/Core Logic Intel® System Control Hub US15W
 Intel® US15W integrated GMA 500 Graphic,
full hardware acceleration of H.264, MPEG2, System Memory Memory down, 512MB DDR2 400/533 SDRAM
VC1 and WMV9 is supported BIOS AMI
 Support Two SATA Ports from Qseven Storage Devices SDIO Interface, support boot from SD (SDIO 1.1); 2 x SATA
Golden Finger N/A
Solid State Disk
 Ultra Low CPU and SCH TDP (Under 5W) Watchdog Timer N/A
for fan-less application
Expansion Interface - One SDVO interface
 Full Hardware acceleration of H.264, - One PCI Express x1
- LPC Interface
MPEG2, VC1 and WM V9 is supported - High definition audio interface
 On board 512MB DDR2 supported Hardware Monitoring CPU Voltage and Temperature Sensing

 4Mbit flash ROM for easy BIOS upgrade Dimension Dimension : 70(L) x 70(W) mm; 2.75"(L) x 2.75" (W)
and video BIOS for DFP Environment Operating Temperature: 0 to 60oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

ORDERING GUIDE
I/O
Standard PQ7-M101G-1100-0512
MIO N/A
Intel ® AtomTM Z510 Processor based Qseven
module with 512MB DDR2 SDRAM, LVDS IrDA N/A
Display, Gigabit Ethernet SDVO and SATA
Ethernet One Gigabit Ethernet Controller (Realtek RTL8111B-GR)
PQ7-M101G-1600-0512
Audio Intel® HDA
Intel ® AtomTM Z530 Processor based Qseven
module with 512MB DDR2 SDRAM, LVDS USB USB 2.0 x 8
Display, Gigabit Ethernet SDVO and SATA
Keyboard & Mouse N/A
PQ7-M101G-1600-1024
Intel ® AtomTM Z530 Processor based Qseven
module with 1024MB DDR2 SDRAM, LVDS
Display, Gigabit Ethernet SDVO and SATA
DISPLAY
Graphic Controller Intel® US15W SCH

Graphic Memory Intel® GMA 500

Display Interface LVDS / SDVO

123 Modular-PQ7-M101G
Qseven, Intel® Embedded Menlow-XL Platform

PQ7-M102XL with DDR2 SDRAM, LVDS Display, Gigabit


Ethernet, SDVO and SATA

512MB or 1GB DDR2 400/533 SDRAM

Intel® AtomTM Z510PT / Z520PT

Intel® US15WPT SCH

* Actual Size
Intel® 82574 IT

FEATURES GENERAL
TM Processor Intel® AtomTM Processor Z510PT/Z520PT
 Atom Z510PT (1.1GHz) or Z520PT
(1.33GHz) Chipset/Core Logic Intel® System Control Hub US15WPT

 Intel® US15WPT integrated GMA 500 System Memory Memory down, 512MB 400/533 SDRAM
Graphic, full hardware acceleration of H.264, BIOS AMI
MPEG2, VC1 and WMV9 is supported
Storage Devices SDIO Interface, support boot from SD (SDIO 1.1); 2 x SATA
 Support Two SATA Ports from Qseven N/A
Solid State Disk
Golden Finger
Watchdog Timer N/A
 Ultra Low CPU and SCH TDP (Under 5W)
Expansion Interface - One Port SDVO interface
for fan-less application - One PCI Express x1
- LPC Interface
 Internal LVDS and SDVO interface for dual - High definition audio interface
independent display
Hardware Monitoring CPU Voltage and Temperature Sensing
 On board 512MB DDR2 supported
Dimension Dimension : 70(L) x 70(W) mm; 2.75"(L) x 2.75" (W)
 4Mbit flash ROM for easy BIOS upgrade Environment Operating Temperature: -40 to 85oC
and video BIOS for DFP Storage Temperature: -40 to 85oC
Relative Humidity: 5% to 95%, non-condensing

I/O
ORDERING GUIDE MIO N/A

IrDA N/A
Standard PQ7-M102XL-1100-0512
Ethernet One Gigabit Ethernet Controller (Intel® 82574 IT)
Intel ® AtomTM Z510PT Processor based
Qseven module with 512MB DDR2 SDRAM, Audio Intel® HDA
LVDS Display, Gigabit Ethernet SDVO and
SATA USB USB 2.0 x 8

PQ7-M1102XL-1330-0512 Keyboard & Mouse N/A


Intel ® AtomTM Z520PT Processor based
Qseven module with 512MB DDR2 SDRAM,
LVDS Display, Gigabit Ethernet SDVO and
SATA
DISPLAY
Graphic Controller Intel® US15WPT SCH

Graphic Memory Intel® GMA 500

Display Interface LVDS / SDVO

Modular-PQ7-M102XL 124
Qseven, Based on Intel® eMenlow XL

PQ7-M103XL Platform with DDR2 SDRAM,SATA


LVDS Display, Gigabit Ethernet,
SDVO and NANDrive

512MB or 1GB DDR2 400/533 SDRAM

Intel® AtomTM Z510PT/Z520PT

PCI Express Switch


Intel® US15WPT SCH

Solid State Drive


Intel® 82574 IT

*Actual Size

FEATURES GENERAL
Processor Intel® Atom™ Processor Z510PT / Z520PT (with Hyper-Threading Technology)
 Atom™ Z510PT (1.1GHz) or Z520PT
(1.33GHz) Chipset/Core Logic Intel® System Control Hub US15WPT

 ®
Intel US15WPT integrated GMA 500 System Memory Memory down, Up to 1 GB DDR2 400/533 SDRAM, single channel (64 bits
wide), 1 rank
Graphic
BIOS AMI
 Ultra Low CPU and SCH TDP (Under 5W)
for fan-less application Storage Devices SATA x2, SSD on module

 LVDS and SDVO interface for dual Solid State Disk On-borad ATA 1GB Solid State Drive, up to 4G Byte support (optional)
independent display Watchdog Timer Customization

 Full Hardware acceleration of H.264, Expansion Interface - Two PCI Express x1 lanes (3rd lane is available if no GbE support)
MPEG2, VC1 and WMV9 is supported - One SDVO interface
- LPC Interface
 On board DDR2 supported up 1GB - High definition audio interface

 4Mbit flash ROM for easy BIOS upgrade Hardware Monitoring EMC 1402 for Voltage and Temperature Sensing
and video BIOS for DFP Dimension Dimension : 70(W) x 70(L) mm; 2.75"(W) x 2.75" (L)

Environment Operation Temperature:-40 to 85°C


ORDERING GUIDE Storage Temperature: -40 to 85°C
Operation Humidity: 5 to 90%
Standard PQ7-M103XL-1100-0512-1G SSD
Intel ® Atom™ Z510PT Processor based
Qseven module with 512MB DDR2 SDRAM,
LVDS Display, Gigabit Ethernet, SDVO and
I/O
1GB SSD MIO N/A
PQ7-M103XL-1100-1024-1G SSD
Intel ® Atom™ Z510PT Processor based IrDA N/A
Qseven module with 1GB DDR2 SDRAM, One Gigabit Ethernet Controller (Intel® 82574 IT)
LVDS Display, Gigabit Ethernet, SDVO and Ethernet
1GB SSD Audio Intel® High Definition Audio (Intel® HD Audio)
PQ7-M103XL-1330-0512-1G SSD
Intel ® Atom™ Z520PT Processor based USB USB 2.0 x 8
Qseven module with 512MB DDR2 SDRAM,
LVDS Display, Gigabit Ethernet, SDVO and Keyboard & Mouse N/A
1GB SSD
PQ7-M103XL-1330-1024-1G SSD
Intel ® Atom™ Z520PT Processor based
Qseven module with 1GB DDR2 SDRAM,
LVDS Display, Gigabit Ethernet, SDVO and DISPLAY
1GB SSD Graphic Controller Intel® US15WPT SCH

Optional Heat Spreader Graphic Memory Intel® GMA 500


70x62x8mm for PQ7-M103XL with 512MB
DDR2 SDRAM Display Interface - Single channel 112MHz LVDS transmitter, supports display with 1x18 and
Heat Spreader and 1x24 bit data mapping up to resolutions of 1366x768 pixel
70x62x8mm for PQ7-M103XL with 1GB DDR2 - Single channel SDVO interface, supports resolutions up to 1280x1024 pixel
SDRAM - Dual independent display support

125 Modular-PQ7-M103XL Series


Qseven, based on Intel® AtomTM Processor

PQ7-M104G with DDR2 SDRAM, LVDS Display, Gigabit


Ethernet, SDVO and SATA

Up to 2GB DDR2 Memory

Intel® US15W SCH


2 SATA Ports

Intel® AtomTM Z510/530

Realtek 8111D GbE

FEATURES GENERAL
Qseven Module Intel® Atom™ Processor Z510/Z530
 Atom™ Z510 (1.1GHz) or Z530 (1.6GHz)
Chipset/Core Logic Intel® System Control Hub US15W
 Intel® US15W integrated GMA 500 Graphic,
System Memory Memory down, up to 2GB DDR2 400/533 SDRAM
full hardware acceleration of H.264, MPEG2,
VC1 and WMV9 is supported BIOS AMI

 Support two SATA and three PCI Express Storage Devices SDIO Interface
lanes from Qseven Golden Finger On-board ATA 1GB Solid State Drive, up to 8G Byte support (optional)
Solid State Disk
 Ultra Low CPU and SCH TDP (Under 5W) Watchdog Timer N/A
for fan-less application
Expansion Interface - One Port SDVO Interface
 Internal LVDS and SDVO interface for dual - Three PCI Express x1 lanes (fourth lanes is available if no SATA support)
- Two Ports SATA Interface
independent display - LPC Interface
- High Definition Audio Interface
 On board up to 2GB DDR2 supported
Hardware Monitoring CPU Voltage and Temperature Sensing

Dimension Dimension : 70(W) x 70(L) mm; 2.75"(W) x 2.75" (L)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5 to 90%
ORDERING GUIDE
Standard PQ7-M104G-1100-0512
Intel ® Atom™ Z510 Processor based Qseven
module with 512MB DDR2 SDRAM, LVDS I/O
Display, Gigabit Ethernet, SDVO and SATA
MIO N/A
PQ7-M104G-1100-1024
Intel ® Atom™ Z510 Processor based Qseven IrDA N/A
module with 1GB DDR2 SDRAM, LVDS
Display, Gigabit Ethernet, SDVO and SATA Ethernet One Realtek Gigabit Ethernet Controller (RTL8111D)
PQ7-M104G-1100-2048
Intel ® Atom™ Z510 Processor based Qseven Audio Intel® HDA
module with 2GB DDR2 SDRAM, LVDS
USB USB 2.0 x 8
Display, Gigabit Ethernet, SDVO and SATA
PQ7-M104G-1600-0512 Keyboard & Mouse N/A
Intel ® Atom™ Z530 Processor based Qseven
module with 512MB DDR2 SDRAM, LVDS
Display, Gigabit Ethernet, SDVO and SATA
PQ7-M104G-1600-1024
Intel ® Atom™ Z530 Processor based Qseven
module with 1GB DDR2 SDRAM, LVDS DISPLAY
Display, Gigabit Ethernet, SDVO and SATA Intel® US15W SCH
PQ7-M104G-1600-2048
Graphic Controller
Intel ® Atom™ Z530 Processor based Qseven Graphic Memory Intel® GMA 500
module with 2GB DDR2 SDRAM, LVDS
Display, Gigabit Ethernet, SDVO and SATA Display Interface LVDS / SDVO

Modular-PQ7-M104G 126
PQ7-C100XL 3.5" ESB Form Factor Carrier Board For Qseven
Module

COM (RS232/422/485)
Four USB Ports 12V DC-IN
GbE port VGA

SDIO

PQ7-M102XL with Qseven module


LVDS port
Rear I/O

FEATURES GENERAL
Qseven module Portwell Qseven module PQ7-M102XL Series
 Qseven carrier board accept Portwell Qseven
modules BIOS AMI BIOS (or BIOS and Qseven Module)

® TM Storage Devices SATA x 2


 Intel Atom Z5XXPT and SCH US15WPT
Solid State Disk One SD socket (Support boot from SD)
 3.5” ESB form factor to embedded
applications Watchdog Timer Programmable via software from 0.5 sec. to 254.4 min.

Expansion Interface One mini-PCIe connector


 On Board DC to DC circuit for DC in
application Dimension Dimension : 146(L) x 105(W) mm; 5.75"(L) x 4.13" (W)

 Mini-PCIe support Environment Operating Temperature: -40 to 85oC


Storage Temperature: -20 to 80oC
 Support boot from SD (SDIO 1.1) Relative Humidity: 5% to 90%, non-condensing

I/O
MIO RS232 x1, Client USB x1, Mic-in/Line-out

IrDA Yes

Ethernet IEEE802.3 10/100/1000 BASE-T Gigabit Ethernet compliant

Audio Mic-in, Line-out

USB 2.0 x 7
ORDERING GUIDE USB
Keyboard & Mouse N/A
Standard PQ7-C100XL
Qseven Module in 3.5" ESB Form Factor
Carrier Board with Wide range temperature
support

DISPLAY
Graphic Controller Intel® US15WPT SCH

Graphic Memory Intel® GMA 500

Display Interface LVDS / VGA

127
PQ7-C200 Mini-ITX Form Factor Carrier Board For Qseven
Module with Dual Displays and Two GbE

Dual GbE + Four USB Ports


Parallel Port
Audio VGA COM1 (RS232)

PS2 Keyboard/Mouse

COM2 (RS232/422/485) selectable


PCI Expansion
slot

mini-PCI connector

PCIE x1 Expansion
slot

PQ7-C200 with Qseven module


One IDE channel
Two SATA Ports Rear I/O
SDIO LVDS

FEATURES GENERAL
Qseven Module Portwell Qseven module PQ7-M100 Series
 Qseven carrier board accept Portwell Qseven
modules BIOS Award BIOS (or BIOS on Qseven Module)

 ®
Intel Atom TM
Z5XX and SCH US15W Storage Devices IDE x1, SATA x2

 Mini-ITX form factor for embedded Solid State Disk One SD socket
applications Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.

 Dual PCI interface Gigabit Ethernet ports Expansion Interface - One mini-PCI connector
- One PCI expansion connector
 One IDE channel and Two SATA 150 Ports - One PCIE x1 expansion connector by riser card

Hardware Monitoring CPU temperature


 One PCI and PCIE x1 expansion slot via riser
card Dimension Dimension : 170(L) x 170(W) mm; 6.69"(L) x 6.69" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

I/O
MIO RS232 x1, RS232/422/485 selectable x1, LPT x1, K/B x1, Mouse x1, GbE x2

IrDA N/A

Ethernet IEEE802.3 10/100/1000BASE-T Gigabit Ethernet compliant

Audio Mic in, Line in, Line out

USB USB 2.0 x 4 ports and USB 2.0 x2 with header

Keyboard & Mouse PS/2 Keyboard & Mouse

ORDERING GUIDE
Standard PQ7-C200
Qseven Module in Mini-ITX Form Factor DISPLAY
Carrier Board with Dual Displays and Two
Graphic Controller Intel® US15W SCH
GbE
Graphic Memory Intel® GMA 500

Display Interface LVDS / VGA

Modular-PQ7-C200 128
PEM-E200VLA Intel® AtomTM based Type ETX module with DDR2
SDRAM, VGA, Fast Ethernet, SATA and USB

200-pin SODIMM socket

Two SATA Port

Intel® ICH7M

ATOMTM N270

Fast Ethernet

Intel® 945GSE

FEATURES GENERAL
Processor CPU & Package: Intel® AtomTM N270 1.6GHz in FCBGA package
 The Intel® AtomTM N270 and 945GSE FSB: 533MHz
platform that provides cost effective solution
Chipset/Core Logic Intel® 945GSE and ICH7M
and technology
System Memory Up to 2GB DDR2 533 SDRAM on one 200-pin SODIMM socket
 The Intel® platform brings under 10W TDP
solution for easy fan-less design BIOS Award BIOS

 SATA and IDE interface provide best cost Storage Devices EIDE: Support two EIDE channel with Ultra DMA 100/66/33
SATA: Support two SATA 150 drives
effective functions for market
Solid State Disk N/A
 Architecture of module and carrier boards
Watchdog Timer Programmable via software from 1 sec. to 255 min.
speeds up time-to-market of tailor-made
equipment Expansion Interface - Two IDE channels
- Four PCI devices
 Support one SODIMM socket and up to 2GB - ISA Bus
memory size - Two COM Ports
- One Printer Port
- PS/2 Keyboard and Mouse
- Line Out, Line In and MIC

Hardware Monitoring CPU temperature

Dimension Dimension : 114(L) x 95(W) mm; 4.5"(L) x 3.7" (W)

Environment Operating Temperature: 0 to 60oC


Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing

ORDERING GUIDE I/O


MIO Two serial ports (TTL Level)
Standard PEM-E200VLA
Intel ® AtomTM N270, 945GSE platform based IrDA Yes
ETX module with DDR2 SDRAM, VGA, Fast Ethernet One Fast Ethernet Controller (Realtek RTL8102EL)
Ethernet and USB
Audio One HDA Audio Codec

USB Four USB ports

Keyboard & Mouse PS/2 Keyboard and Mouse

DISPLAY
Graphic Controller Intel® 945GSE integrated Graphics Media Accelerator (Intel® GMA 950)

Graphic Memory Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share
system memory up to 128MB

Display Interface - Support dual VGA (2nd supported by Chrontel CH7317A), LVDS and TV-out
(optional)
- CRT display resolution up to 2048x1536@85Hz refresh

129 Modular-PEM-E200VLA
About-WEBS
WEBS: Portwell Intelligent Fan-less System
Compact, Flexible, Rugged Computing Systems
With the capability of leading embedded computing technology, Portwell developed the industrial grade
WEBS fan-less computing systems for harsh environment applications such as factory automation,
transportation, facility management, networking and public works.
To meet these harsh environmental parameters, each WEBS computing system was designed by precise
thermal simulation and verification to make the system stable and user friendly.
The all-aluminum chassis design provides effective heat dissipation and transfers the heat out of the system
quickly and easily.
Built with the latest Intel® chipsets, the WEBS systems feature not only superior performance but also low
power consumption. They are suitable for energy-critical applications and idea for environmental protection.

131 Portwell Intelligent Fan-less System


Quality Assurance
1 Design & Analysis
Portwell WEBS systems use quality assurance reviewing procedures in the critical early stages of development.
Designing a stable product makes it easy for quality checking and complies with Design for Quality (DFQ).
At the development stage the product design also involves the material and assembly important for production, with
the focus on Design for Manufacturability (DFM). This develops simple, consistent and efficient system structures
and endows the product with a stable quality.
With its experienced engineering team, plus the complete development facility with 3D, circuit and layout design
equipments, Portwell is able to supply more efficient system development to support its customers in “Design Win”.

Design & analysis is performed by 3D workstation. (WEBS-2120) Circuit design & layout by advanced tools (NANO-8044)

2 Thermal Design
Since there is no fan and airflow inside the fan-less WEBS systems, handling the thermal output becomes one of
the most important concerns. System heat comes from ICs on the embedded board and this is pre-determined by
Intel®. Therefore, the key to developing a reliable fan-less system is determined by two major factors.
First is to balance the heat on the embedded board and make sure it does not accumulat. Determining the thermal
balance for the hot components is a prime concern. The picture below shows the heat situation of the NANO-8044,
NANO-ITX embedded board used in the WEBS-2120 system. The heat in this example is arranged and balanced
for superior dissipation in a fan-less system design.

60.5 °C
FLIR Systems

60

Ar1
50

Ar2
40

30
28.1

NANO-8044 M/B Thermal image of NANO-8044 M/B

Second is to maximize the arrangement of heat dissipation by system design. WEBS Systems are designed with
an all-aluminum chassis that is ideal for heat dissipation. Heat sinks link the ICs on the embedded board and the
aluminum chassis for direct heat transference. The heat transfers from the bottom up so the lower temperature
is at the chassis top for greater ease of use and protection. The pictures below illustrate the heat flow of a WEBS
system. Balancing the heat of the product in this way makes the perfect fan-less system.

WEBS-2120 Heat-flow (Bottom) WEBS-2120 Heat-flow (Top)

Intelligent Fan-less Embedded Solutions 132


Quality Assurance
3 Thermal Validation
After completing the thermal design, the WEBS system starts the thermal validation by following Intel’s thermal
guide and the system is tested inside the calibrated chamber with defined temperatures. The efficacy of the
WEBS system is further improved when the temperature of any component is over specification. Thermal tests are
conducted until all the major ICs are below thermal specification.

Holes are made on the heat sink and Holes are made on the heat sink and thermal sensor cables
thermal sensor cables are added for are added for measuring the temperature
measuring the temperature

4 Safety & Reliability Validation


In addition to the thermal validation, the WEBS systems undergo safety assessment and tests and achieve CE and
FCC certification. Testings include ESD, EMI and EMC.
To ensure product quality, complete quality assurance tests are performed during both the development and the
manufacturing phases for all system-level products. Portwell WEBS systems are tested and comply with safety
regulations, and are reliable to be used in the harsh environments.
-Based on customer’s requirements, Portwell can do additional tests with a NRE (non-recurring engineering) charge.

ESD Test EMC Test EMC Test

Vibration Test Packing Vibration Test

Shock Test Packing Drop Test

133 Intelligent Fan-less Embedded Solutions


Brick Concept
Brick Concept
As well as stable quality requirements, users are always looking for a unique product to differenciate them from
their competitors. To simplify system customization, Portwell created the Brick concept, an intelligent structure for
the WEBS systems that builds the WEBS chassis using three simple elements: wall, pillar and cover. This makes
the chassis flexible and easy for customization by following customer’s requirements. The illustation below shows
the segments for customization.
* May necessitate extra cost and MOQ for an individual customization.

Custom Color Rugged Wall

Private Logo Net Wall

Expand I/O (By model)

With its flexible structure, a Portwell WEBS system can adjust the size of its form-factor to supply a customized
chassis for customer. The three system sizes below illustrate the standard WEBS system form-factors. Customer
can adapt any model to suit their applications. (Size unit is mm)

150x150x51 (NANO-ITX) 200x150x51 (3.5” ECX) 200x200x51 (Mini-ITX)

Configuration
 Full System: Chassis + (Power Module) + Adaptor + Cable + Embedded Board + Memory + HDD/CF
 Bare System (By requuest only): Chassis + (Power Module) + Adaptor + Cable + Embedded Board

Intelligent Fan-less Embedded Solutions 134


WEBS Reference Table

Compact &
Low Power Low Power Low Power Slim & Cable-less
Low Power

Model WEBS-3330 WEBS-2120 WEBS-2121 WEBS-1320 WEBS-3331

Embedded
WADE-8070 NANO-8044 NANO-8045 PEB-2737 WADE-8071
Board
Form Factor MINI-ITX NANO-ITX NANO-ITX 3.5” ECX MINI-ITX

Atom™ N270 Atom™ Z510 1.1GHz Atom™ Z510 1.1GHz Atom™ Z510 1.1GHz
Intel® Processor Atom™ N270 1.6GHz
1.6GHz Atom™ Z530 1.6GHz Atom™ Z530 1.6GHz Atom™ Z530 1.6GHz

Platform Intel® Chipset 945GSE+ICH7-M US15W US15W US15W 945GSE+ICH7-M

FSB 533MHz 400MHz / 533MHz 400MHz / 533MHz 400MHz / 533MHz 533MHz

BIOS Award BIOS AMI BIOS AMI BIOS AMI BIOS Award BIOS

Socket 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM
Memory
Max. Memory DDR2 2GB DDR2 2GB DDR2 2GB DDR2 2GB DDR2 2GB

Solid State CF Socket CF Socket CF Socket CF Socket CF Socket


Storage
HDD 2.5” SATA HDD 2.5” PATA 2.5” SATA HDD 2.5” SATA HDD N/A

RTL8111C-VB Intel® 82574L RTL8111C-VC RTL8111C-VC RTL8111C-VC


Networking Controller (interface)
(PCIE x1) (PCIE x1) (PCIE x1) (PCIE x1) (PCIE x1)

Video Controller GMA 950 GMA 500 GMA 500 GMA 500 GMA 950

Realtek ALC262-VC2-
Audio Codec Realtek ALC662-GR Realtek ALC262 Realtek ALC262
GR
Realtek ALC662-GR

Winbond W83627HG-
Controller Winbond W83627UHG Winbond W83627DHG Winbond W83627DHG Winbond W83627DHG
AW
H/W Monitor
Programable Programable Programable Programable Programable
WDT
(1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.)

1x RS232
COM Ports 1x RS232/422/485 1x RS232 1x RS232 1x RS232
1x RS232/422/485

Digital I/O N/A N/A N/A N/A N/A

USB 2.0 4 2 2 4 4

VGA 1 x VGA 1 x VGA N/A 1 x VGA 1 x VGA

DVI N/A N/A 1 x DVI N/A N/A


I/O
LAN 1 x Gigabit Ethernet 1 x Gigabit Ethernet 1 x Gigabit Ethernet 1 x Gigabit Ethernet 1 x Gigabit Ethernet

PS/2 1 x KB; 1 x Mouse N/A N/A 1 x KB; 1 x Mouse N/A

Audio Line-out and Mic-in Line-out and Mic-in Line-out and Mic-in Line-out and Mic-in Line-out and Mic-in

Internal CF 1 x CF Socket 1 x CF Socket 1 x CF Socket 1 x CF Socket 1 x CF Socket

SDIO socket
Expansion 1 x Mini-PCI socket N/A N/A N/A
(Internal onboard)

System 12V DC-in 12V DC-in 12V DC-in 12V DC-in 12V DC-in
Power
Adaptor 100 ~ 240V 100 ~ 240V 100 ~ 240V 100 ~ 240V 100 ~ 240V

OS Supported XP, Vista, CE, Linux XP, XPe, CE, Linux XP, XPe, CE, Linux XP, Vista, CE, Linux XP, Vista, CE, Linux

Temperature -5 ~ 45°C -5 ~ 45°C -5 ~ 45°C -5 ~ 45°C -5 ~ 45°C


Environmental
Parameters Hmidity (RH)
5 ~ 95%, 5 ~ 95%, 5 ~ 95%, 5 ~ 95%, 10 ~ 90%,
non-condensing non-condensing non-condensing non-condensing non-condensing

Size (mm) 200 x 200 x 51 150 x 150 x 51 150 x 150 x 51 200 x 150 x 51 200 x 200 x 36

135 WEBS Embedded Fan-less Systems


WEBS Reference Table

Wide Range Power Wide Temp.


Rich Function Rich Function Slim & Cable-less
Input Range

Model WEBS-4330 WEBS-1310 WEBS-1330 WEBS-1340 WEBS-3332

Embedded
WADE-8170 PEB-2738 PEB-2131VG2A PEB-2780 WADE-8071
Board
Form Factor MINI-ITX 3.5” ECX 3.5” ECX 3.5” ECX MINI-ITX

Atom™ Z510 1.1GHz Atom™ N450/D510


Intel® Processor Atom™ N270 1.6GHz Atom™ N270 1.6GHz Atom™ N270 1.6GHz
Atom™ Z520 1.3GHz 1.6GHz

Platform Intel® Chipset 945GSE+ICH7-M US15W PT 945GSE+ICH7-M ICH8-M 945GSE+ICH7-M

FSB 533MHz 400MHz / 533MHz 533MHz / 667MHz 667MHz 533MHz

BIOS Award BIOS AMI BIOS Award BIOS Award BIOS Award BIOS

Socket 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM 200-pin SO-DIMM
Memory
Max. Memory DDR2 2GB DDR2 2GB DDR2 2GB DDR2 2GB DDR2 2GB

Solid State CF Socket CF Socket CF Socket CF Socket CF Socket


Storage
HDD 2.5” SATA HDD 2.5” SSD 2.5” SATA HDD 2.5” SATA HDD N/A

1x Intel® 82657V
ALC8111C Intel® 82574IT RTL8111D-VB-GR RTL8111C-VC
Networking Controller (interface)
(PCIE x1) (PCIE x1) (PCIE x1)
1x Intel® 82583V
(PCIE x1)
(PCIE x1)

Video Controller GMA 950 GMA 500 GMA 950 GMA 950 GMA 950

Audio Codec Realtek ALC655 Realtek ALC662-GR Realtek ALC662 Realtek ALC262 Realtek ALC662-GR

Controller ITE IT8712 Winbond W83627DHG Winbond W83627UHG Winbond W83627UHG Winbond W83627HG-AW
H/W Monitor
Programable Programable Programable Programable Programable
WDT
(1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.) (1sec. to 255min.)

1x RS232 3x RS232
COM Ports 2x RS232 4x RS232 1x RS232
1x RS232/422/485 1x RS232/422/485

Digital I/O 8-bit Digital I/O 8-bit Digital I/O N/A N/A N/A

USB 2.0 4 4 2 4 4

VGA 1 x VGA 1 x VGA 1 x VGA 1 x VGA 1 x VGA

DVI 1 x DVI-D N/A N/A N/A N/A


I/O
LAN 2 x Gigabit Ethernet 1 x Gigabit Ethernet 2 x Gigabit Ethernet 2 x Gigabit Ethernet 1 x Gigabit Ethernet

PS/2 1 x KB; 1 x Mouse N/A N/A N/A N/A

Line in, Line-out and


Audio Line-out and Mic-in Line-out N/A Line-out and Mic-in
Mic-in

Internal CF 1 x CF Socket 1 x CF Socket 1 x CF Socket 1 x CF Socket 1 x CF Socket

Expansion N/A 1 x Mini-PCIExpress 1 x Mini-PCIExpress N/A N/A

12V DC-in or 9~27V


System 12V DC-in 12V DC-in 12V DC-in 12V DC-in
DC-in(optional)
Power
Adaptor 100 ~ 240V 100 ~ 240V 100 ~ 240V 100 ~ 240V 100 ~ 240V

OS Supported XP, Vista, CE, Linux XP, Vista, CE, Linux XP, Vista, CE, Linux XP, Vista, CE, Linux XP, Vista, CE, Linux

Temperature -5 ~ 45°C -25 ~ 70°C -5 ~ 45°C -5 ~ 45°C -5 ~ 50°C


Environmental
Parameters Hmidity (RH)
10 ~ 90%, 5 ~ 95%, 10 ~ 90%, 10 ~ 90%, 10 ~ 90%,
non-condensing non-condensing non-condensing non-condensing non-condensing

Size (mm) 200 x 200 x 62 200 x 150 x 51 200 x 150 x 51 200 x 150 x 51 200 x 200 x 40

Intelligent Fan-less Embedded Solutions 136


WEBS-3330 Embedded compact fan-less system with Intel®
Atom™ N270 based MINI-ITX board

FEATURES
 Intel® Atom™ N270 1.6GHz processor and
Intel® 945GSE + ICH7-M chipset
 One 200-pin SO-DIMM supports DDR2 SDRAM
up to 2GB
51mm  Dual display (VGA / DVI), Dual Gigabit Ethernet
and Dual serial ports
 Fan-less design is ideal for enviromnent-critical
application
200mm  Optional DVD module
200mm  Optional PCI/e x1 expansion slot for additional
peripheral card
 Versatile mounting solutions such as Wall and
Panel mount (Optional)
 Single DC 12V power input for easy system
intergation

SYSTEM REAR I/O


CPU Intel® AtomTM N270 1.6GHz processor
FSB 533 MHz VGA Ethernet
RS232/422/485 Antenna Hole
BIOS Award BIOS
System Chipset Intel® 945GSE GMCH and ICH7-M
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
Storage - 1 x SATA 2.5” HDD
- 1 x CF
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage, Case open function KB/MS USB Audio
RS232 DVI
Expansion 1 x Mini-PCI socket DC In

REAR PANEL
Serial Port 1 x RS232; 1 x RS232/422/485 selectable WEBS-3330-1602 WEBS-3330-1603
Display 1 x VGA; 1 x DVI
USB 4 x USB 2.0
KB/MS 1 x K/B; 1 x Mouse
Audio Interface Line-out and Mic-in
Ethernet 2 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V
ORDERING GUIDE
WEBS-3330-1600
MECHANICAL & ENVIRONMENTAL System with WADE-8070 (Atom™ N270 1.6GHz) + 2GB DDR2 +
120GB HDD
Operation Temperature -5~45°C
Storage Temperature -20~80°C WEBS-3330-1602
System with WADE-8070 (Atom™ N270 1.6GHz) + 2GB DDR2 +
Relative Humidity 10~90% non-condensing 120GB HDD + DVD Module
Dimension (WxDxH) 200x200x51 mm; 7.9”x7.9”x2”
200x200x83 mm; 7.9”x7.9”x3.3” (with optional module) WEBS-3330-1603
System with WADE-8070 (Atom™ N270 1.6GHz) + 2GB DDR2 +
Weight 1.8 kg 120GB HDD + PCI/e x 1 expansion

137 System-WEBS-3330
Embedded compact fan-less system with Intel®
WEBS-2120 AtomTM Z510/Z530 based NANO-ITX board

FEATURES
 Intel® Atom™ processor Z510/Z530 and System
Controller Hub US15W
 Ultra low power and fan-less design
 One 200-pin SO-DIMM supports DDR2 SDRAM
up to 2GB
51mm
 Versatile interfaces such as Compact Flash and
2.5” HDD
 Compact and user-friendly design for easy instal-
lation and maintenance
150mm  Versatile mounting solutions such as Wall, Panel
150mm
and DIN mount (Optional)
 Vibration test (5grms/5~500Hz/operation) - Com-
pact Flash
 Shock test (50g peak acceleration - 11msec. dura-
tion) - Compact Flash

SYSTEM REAR I/O


CPU Intel® Atom™ processor Z510 / Z530
FSB 400/533 MHz RS232/422/485 USB DC In
BIOS AMI BIOS
System Chipset Intel® System Controller Hub US15W integrated GMA 500
Graphics
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
Storage - 1 x SATA 2.5” HDD
- 1 x CF
Watchdog Timer Programmable via S/W from 1sec. to 255min.
VGA Audio LAN
H/W Status Monitor - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)

Brick Concept
REAR PANEL
Serial Port 1 x RS232/422/485
Display 1 x VGA
USB 4 x USB 2.0
Audio Interface Line-out and Mic-in
Ethernet Ethernet 1 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V

ORDERING GUIDE
MECHANICAL & ENVIRONMENTAL
Operation Temperature -5~45°C WEBS-2120-1100
Storage Temperature -20~80°C System with NANO-8044 (Atom™Z510 1.1GHz) + 1GB DDR2 +
Relative Humidity 5~95% non-condensing
120GB HDD
Dimension (WxDxH) 150x150x51 mm; 5.9”x5.9”x2” WEBS-2120-1600
System with NANO-8044 (Atom™ Z530 1.6GHz) + 2GB DDR2 +
Weight 1 kg
120GB HDD

System-WEBS-2120 138
WEBS-2121 Embedded compact fan-less system with Intel®
Atom™ Z510/Z530 based NANO-ITX board

FEATURES
 Intel® Atom™ processor Z510/Z530 and System
Controller Hub US15W
 Ultra low power and fan-less design
 One 200-pin SO-DIMM supports DDR2 SDRAM
up to 2GB
51mm  Versatile interfaces such as Compact Flash and
SATA 2.5”HDD
 Compact and user-friendly design for easy
installation and maintenance
 Versatile mounting solutions such as Wall, Panel
150mm
and DIN mount (Optional)
150mm
 Vibration test (5grms/5~500Hz/operation) -
Compact Flash
 Shock test (50g peak acceleration - 11msec.
duration) Compact Flash

SYSTEM REAR I/O


CPU Intel® AtomTM processor Z510 / Z530
FSB 400/533 MHz RS232 USB
BIOS AMI BIOS
Intel® System Controller Hub US15W integrated GMA 500
System Chipset
Graphics
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
- 1 x SATA 2.5” HDD
Storage
- 1 x CF
Watchdog Timer Programmable via S/W from 1sec. to 255min. DVI Ethernet Audio
DC In
- Temperature (CPU and System)
H/W Status Monitor
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V)
Brick Concept
REAR PANEL
Serial Port 1 x RS232
Display 1 x DVI
USB 2 x USB 2.0
Audio Interface Line-out and Mic-in
Ethernet 1 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V

MECHANICAL & ENVIRONMENTAL ORDERING GUIDE


Operation Temperature -5~45°C
WEBS-2121-1100
Storage Temperature -20~80°C System with NANO-8045 (Atom™ Z510 1.1GHz) +1GB DDR2 +
Relative Humidity 5~95% non-condensing 120GB HDD
Dimension (WxDxH) 150x150x51 mm; 5.9”x5.9”x2” WEBS-2121-1600
System with NANO-8045 (Atom™ Z530 1.6GHz) +2GB DDR2 +
Weight 1 kg 120GB HDD

139 System-WEBS-2121
Embedded compact fan-less system with Intel®
WEBS-1320 Atom™ Z510/Z530 based 3.5” ECX board

FEATURES
 Intel® Atom™ processor Z510/Z530 and Sys-
tem Controller Hub US15W
 Ultra low power and fan-less design

 One 200-pin SO-DIMM supports DDR2 SDRAM


51mm up to 2GB
 Versatile interfaces such as Compact Flash and
SATA 2.5” HDD
 Compact and user-friendly design for easy
150mm installation and maintenance

200mm  Versatile mounting solutions such as Wall,


Panel and DIN mount (Optional)
 Single DC 12V power input for easy system
intergation

SYSTEM REAR I/O


CPU Intel® AtomTM processor Z510 / Z530
Ethernet
FSB 400/533 MHz DC In RS232
BIOS AMI BIOS
System Chipset Intel® System Controller Hub US15W integrated GMA 500
Graphics
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
Storage - 1 x SATA 2.5” HDD
- 1 x CF
Watchdog Timer Programmable via S/W from 1sec. to 255min. USB USB
KB/MS Audio VGA
H/W Status Monitor - Temperature (CPU and System)
- Voltage (CPU Vcore, VBAT, 5VSB, 12V, 5V, 3.3V) Brick Concept

REAR PANEL
Serial Port 1 x RS232
Display 1 x VGA
USB 4 x USB 2.0
KB/MS 1 x K/B; 1 x Mouse
Audio Interface Line-out and Mic-in
Ethernet 1 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V

ORDERING GUIDE
MECHANICAL & ENVIRONMENTAL
Operation Temperature -5~45°C WEBS-1320-1100
Storage Temperature -20~80°C System with PEB-2737 (Atom™ Z510 1.1GHz) +1GB DDR2
+ 120GB HDD
Relative Humidity 5~95% non-condensing
Dimension (WxDxH) 200x150x51 mm; 7.9”x5.9”x2”
WEBS-1320-1600
System with PEB-2737 (Atom™ Z530 1.6GHz) +2GB DDR2
Weight 1.2 kg + 120GB HDD

System-WEBS-1320 140
Embedded slim fan-less system with Intel® AtomTM
WEBS-3331 N270 based MINI-ITX board

FEATURES
 Intel® AtomTM N270 1.6GHz processor and
Intel® 945GSE + ICH7-M chipset
 One 200-pin SO-DIMM supports DDR2
SDRAM up to 2GB
36mm
 Analog Display: Up to 2048 x 1536 (QXGA)
 36mm height supports thin client and DS ap-
plication
200mm  Fan-less and optional cable-less design for
easy maintenance
200mm
 Versatile mounting solutions such as Wall and
Panel mount (optional)
 Single DC 12V power input for easy system
intergation
 CF socket for storage

SYSTEM REAR I/O


CPU Intel® AtomTM N270 1.6GHz processor
FSB 533 MHz VGA Audio
DC In
BIOS Award BIOS
Intel® 945GSE GMCH integrated GMA 950 Graphics and
System Chipset
ICH7-M
System Memory One 200-pin SO-DIMM supports DDR2 400/533 up to 2GB
SSD 1 x CF
RS232 USB
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage, Case open function Ethernet

Brick Concept
REAR PANEL
Serial Port 1 x RS232
Display 1 x VGA
USB 4 x USB 2.0
Audio Interface Line-out and Mic-in
Ethernet 1 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V

MECHANICAL & ENVIRONMENTAL


ORDERING GUIDE
Operation Temperature -5~45°C
Storage Temperature -20~80°C WEBS-3331-1600
System with WADE-8071 (Atom™ N270 1.6GHz) +
Relative Humidity 10~90% non-condensing 2GB DDR2 + 4GB CF
Dimension (WxDxH) 200x200x36 mm; 7.9”x7.9”x1.4” WEBS-3331-1601
Weight 1.1 kg System with WADE-8071 (Atom™ N270 1.6GHz) +
1GB DDR2 + 512MB CF

141 System-WEBS-3331
Embedded rugged compact fan-less system with
WEBS-4330 Intel® Atom™ N270 based MINI-ITX board

FEATURES
 Intel® Atom™ N270 1.6GHz processor and Intel®
945GSE+ICH7-M chipset
 Dual display (VGA / DVI-D), Dual Gigabit
Ethernet and Dual RS232
62mm  Optional GADIWA-R9271 (9~27V) for IVI
application
 Rugged and Fan-less design is ideal for
environment-critical application
 External GPIO (4 in, 4 out) for digital control
200mm
 Versatile mounting solutions such as Wall and
200mm Panel mount (Optional)
 Single DC 12V power input for easy system
intergation
 Two interfaces of DC power input by adaptor plug
or wiring type

SYSTEM REAR I/O


CPU Intel® AtomTM N270 1.6GHz processor
FSB 533 MHz
WEBS-4330-1600
BIOS AMI BIOS KB/MS Audio
VGA RS232 Ethernet
Intel® 945GSE GMCH integrated GMA 950 Graphics and
System Chipset
ICH7-M
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
Storage 1 x CF, 1x HDD
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage
Power USB
Switch DVI RS232
REAR PANEL
DC In
Serial Port 2 x RS232
Display 1 x VGA + 1 x DVI-D
USB 4 x USB 2.0
WEBS-4330-1603
KB/MS Audio
KB/MS 1 x K/B; 1 x Mouse VGA RS232 Ethernet
Audio Interface Line-in, Line-out and Mic-in
Ethernet 2 x Gigabit Ethernet
PS/2 1 x Keyboard. 1 x Mouse
Digital IO 8-bit Digital IO

Power Supply Unit


Power USB
Power Input DC 12V Switch DVI RS232
Adaptor AC 100~240V DC In (Wire type)
Optional wire type DC-IN DC 9V~27V
ORDERING GUIDE
MECHANICAL & ENVIRONMENTAL
Operation Temperature -5~45°C WEBS-4330-1600
Storage Temperature -20~80°C System with WADE-8170 (Atom™ N270 1.6GHz)
with DC Jack + Adaptor + 2GB DDR2 + 160GB HDD
Relative Humidity 10~90% non-condensing
Dimension (WxDxH) 200x200x62 mm; 7.9”x7.9”x2.4” WEBS-4330-1603
System with WADE-8170 (Atom™ N270 1.6GHz) +
Weight 1.9 kg GADIWA-R9271 with wire type power input interface

System-WEBS-4330 142
WEBS-1310 Embedded rugged fan-less system with Intel® Atom™
Z510PT/Z520PT based 3.5” ECX board

FEATURES
 Intel® Atom™ processor Z510PT/Z520PT and
System Controller Hub US15WPT
 Wide temperature range and fan-less design are
perfect for environment-critical applications
 One Mini-PCIExpress expansion and Antenna
51mm
hole
 GPIO and rich I/O and good for versatile
applications
 Rugged and compact are good for using at harsh
150mm
environment
200mm  Versatile mounting solutions such as Wall and
Panel mount (Optional)
 Single DC 12V power input for easy system
intergation

SYSTEM REAR I/O


CPU Intel® AtomTM Z510PT(1.1GHz)/Z520PT(1.3GHz)
FSB 400/533 MHz
Antenna
BIOS AMI BIOS Hole
GPIO RS232
System Chipset Intel® US15WPT VGA

System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB


Storage 1 x CF, 1 x SSD
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage

Power
USB Audio DC In
Switch
REAR PANEL
Ethernet RS232/422/485
Serial Port 1 x RS232 + 1 x RS232/422/485
Display 1 x VGA
USB 4 x USB 2.0
Audio Interface Line-out and Mic-in
Ethernet 1 x Gigabit Ethernet
Digital IO 8-bit Digital IO

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V

MECHANICAL & ENVIRONMENTAL ORDERING GUIDE


Operation Temperature -5~45°C
Storage Temperature -20~80°C WEBS-1310-1100
System with PEB-2738 (Atom™ Z510PT 1.1GHz) +
Relative Humidity 5~95% non-condensing 1GB DDR2 + 512MB CF
Dimension (WxDxH) 200x150x51 mm; 7.9”x5.9”x2” WEBS-1310-1300
System with PEB-2738 (Atom™ Z520PT 1.3GHz) +
Weight 1.6 kg
2GB DDR2 + 4GB CF

143 System-WEBS-1310
Embedded rugged fan-less system with Intel®
WEBS-1330 Atom™ N270 based 3.5” ECX board

FEATURES
 Intel® Atom™ N270 1.6GHz processor and Intel®
945GSE+ ICH7-M chipset
 Analog Display: Up to 2048 x 1536 (QXGA)

 One Mini-PCIExpress expansion with an Antenna


hole
51mm  Dual LAN and 4 COMs (5V/12V selectable)
are good for networking, POS and automation
applications
 Rugged and compact design for harsh
150mm environment
200mm
 Versatile mounting solutions such as Wall and
Panel mount (Optional)
 Single DC 12V power input for easy system
intergation

SYSTEM REAR I/O


CPU Intel® AtomTM N270 1.6GHz processor
FSB 533 MHz Antenna
Hole
BIOS AMI BIOS RS232 x 4
Intel® 945GSE GMCH integrated GMA 950 Graphics and
System Chipset
ICH7-M
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
Storage 1 x CF, 1x HDD
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage DC In USB
VGA Ethernet
Power
Line-out Switch
REAR PANEL
Serial Port 4 x Powered RS232 (5V/12V)
Display 1 x VGA
USB 2 x USB 2.0
Audio Interface Line-out
Ethernet 2 x Gigabit Ethernet

Power Supply Unit


Power Input DC 12V
Adaptor AC 100~240V
ORDERING GUIDE
MECHANICAL & ENVIRONMENTAL WEBS-1330-1600
Operation Temperature -5~45°C System with PEB-2131 (AtomTM N270 1.6GHz) +
1GB DDR2 + 512MB CF
Storage Temperature -20~80°C
Relative Humidity 10~90% non-condensing
Dimension (WxDxH) 200x150x51 mm; 7.9”x5.9”x2”
Weight 1.6 kg

System-WEBS-1330 144
WEBS-1340 Embedded rugged fan-less system with Intel® Atom™
N450/D510 based 3.5” ECX board

FEATURES
 Fan-less solution with Dual-Core CPU

 Intel® Atom™ N450/D510 1.6GHz processor


and Intel® ICH8-M chipset
 Dual Gigabit Ethernet
51mm
 Rich I/O is good for versatile applications

 Rugged and compact design for harsh


environment
150mm  Versatile mounting solutions such as Wall and
200mm Panel mount (Optional)
 Single DC 12V power input for easy system
intergation
 Three RS232 and one RS232/422/485 serial
ports

SYSTEM REAR I/O


CPU Intel® AtomTM N450/D510 1.6GHz processor
FSB 667 MHz Antenna
USB
BIOS AMI BIOS
RS232 RS232/422/485 Hole
System Chipset Intel® ICH8-M
System Memory One 200-pin SO-DIMM support DDR2 up to 2GB
Storage 1 x CF, 1 x HDD
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage
RS232
Ethernet
USB DC In Power
VGA Switch
REAR PANEL
Serial Port 3 x RS232 + 1 x RS232/422/485
Display 1 x VGA
USB 4 x USB 2.0
Audio Interface N/A (internal header only)
Ethernet 2 x Gigabit Ethernet

Power Supply Unit ORDERING GUIDE


Power Input DC 12V
Adaptor AC 100~240V WEBS-1340-1600
System with PEB-2780 (Atom™ N450 1.6GHz) +
1GB DDR2 + 512MB CF

MECHANICAL & ENVIRONMENTAL


Operation Temperature -5~45°C
Storage Temperature -20~80°C
Relative Humidity 10~90% non-condensing
Dimension (WxDxH) 200x150x51 mm; 7.9”x5.9”x2”
Weight 1.6 kg

145 System-WEBS-1340
Embedded rugged slim fan-less system with Intel®
WEBS-3332 AtomTM N270 based MINI-ITX board

FEATURES
 Intel® AtomTM N270 1.6GHz processor and
Intel?945GSE + ICH7-M chipset
 One 200-Pin SO-DIMM supports DDR2 SDRAM
up to 2GB
40mm
 Analog Display: Up to 2048 x 1536 (QXGA)
 40mm height supports thin client and DS
application
200mm  Fan-less and optional cable-less design for easy
maintenance
200mm
 Rugged and slim design is ideal for environment-
critical application
 Versatile mounting solutions such as Wall and
Panel mount (Optional)
 Vibration test (5grms/5~500Hz/operation)
 Shock test (50g peak acceleration - 11msec.
duration)

SYSTEM REAR I/O


CPU Intel® AtomTM N270 1.6GHz processor
FSB 533 MHz
BIOS Award BIOS Power Switch
VGA
System Chipset Intel® 945GSE GMCH integrated GMA 950 Graphics and DC In
Audio
ICH7-M
System Memory One 200-pin SO-DIMM support DDR2 400/533 up to 2GB
SSD 1 x CF
Watchdog Timer Programmable via S/W from 1sec. to 255min.
H/W Status Monitor Temperature (CPU and System), Voltage
RS232 USB
Ethernet

REAR PANEL
Serial Port 1 x RS232
Display 1 x VGA
USB 4 x USB 2.0
Audio Interface Line-out and Mic-in
Ethernet 1 x Gigabit Ethernet

Power Supply Unit ORDERING GUIDE


Power Input DC 12V
Adaptor AC 100~240V WEBS-3332-1600
System with WADE-8071 (Atom™ N270 1.6GHz) +
2GB DDR2 + 4GB CF
MECHANICAL & ENVIRONMENTAL WEBS-3332-1601
Operation Temperature -5~50°C System with WADE-8071 (Atom™ N270 1.6GHz) +
1GB DDR2 + 512MB CF
Storage Temperature -20~80°C
Relative Humidity 10~90% non-condensing
Dimension (WxDxH) 200x200x40 mm; 7.9”x7.9”x1.6”
Weight 1.4 kg

System-WEBS-3332 146
WEBS Mounting Solution
Wall Mount Kit Panel Mount Kit

WEBS-2120 / 2121 / 1320 WEBS-2120 / 2121


System Size 150/200(W) x 150(D) x 51(H)mm System Size 150(W) x 150(D) x 51(H)mm

Ordering WEBS-2120 Wall Mount Kit Ordering WEBS-2120 Panel Mount Kit

Remark VESA 75/100


WEBS-3330 / 3331
System Size 200(W) x 200(D) x 51/36(H)mm WEBS-1320
Ordering WEBS-3330 Wall Mount Kit System Size 200(W) x 150(D) x 51(H)mm

Ordering WEBS-1320 Panel Mount Kit

Remark VESA 75/100

WEBS-3330 / 3331
System Size 200(W) x 200(D) x 51/36(H)mm

Ordering WEBS-3330 Panel Mount Kit

Remark VESA 75/100

WEBS-3332 / 4330
System Size 200(W) x 200(D) x 40/62(H)mm

Ordering WEBS-3332 Wall Mount Kit

WEBS-1310 / 1330 / 1340


System Size 200(W) x 150(D) x 51(H)mm

Ordering WEBS-1310 Wall Mount Kit

DIN Mount Kit


WEBS-3332 / 4330
System Size 200(W) x 200(D) x 40/62(H)mm

Ordering WEBS-3332 Panel Mount Kit

Remark VESA 75/100

WEBS-1310 / 1330 / 1340


WEBS-2120 / 2121 / 1320 System Size 200(W) x 150(D) x 51(H)mm

System Size 150/200(W) x 150(D) x 51(H)mm Ordering WEBS-1310 Panel Mount Kit

Ordering WEBS-2120 Wall Mount Kit Remark VESA 75/100

Remark DIN Rail H=35mm (w/o Rail)

147 System-WEBS Mounting Solution


WEBS Mounting Solution
Wall Mount Kit Panel Mount Kit

WEBS-2120 / 2121 / 1320 WEBS-2120 / 2121


System Size 150/200(W) x 150(D) x 51(H)mm System Size 150(W) x 150(D) x 51(H)mm

Ordering WEBS-2120 Wall Mount Kit Ordering WEBS-2120 Panel Mount Kit

Remark VESA 75/100


WEBS-3330 / 3331
System Size 200(W) x 200(D) x 51/36(H)mm WEBS-1320
Ordering WEBS-3330 Wall Mount Kit System Size 200(W) x 150(D) x 51(H)mm

Ordering WEBS-1320 Panel Mount Kit

Remark VESA 75/100

WEBS-3330 / 3331
System Size 200(W) x 200(D) x 51/36(H)mm

Ordering WEBS-3330 Panel Mount Kit

Remark VESA 75/100

WEBS-3332 / 4330
System Size 200(W) x 200(D) x 40/62(H)mm

Ordering WEBS-3332 Wall Mount Kit

WEBS-1310 / 1330 / 1340


System Size 200(W) x 150(D) x 51(H)mm

Ordering WEBS-1310 Wall Mount Kit

DIN Mount Kit


WEBS-3332 / 4330
System Size 200(W) x 200(D) x 40/62(H)mm

Ordering WEBS-3332 Panel Mount Kit

Remark VESA 75/100

WEBS-1310 / 1330 / 1340


WEBS-2120 / 2121 / 1320 System Size 200(W) x 150(D) x 51(H)mm

System Size 150/200(W) x 150(D) x 51(H)mm Ordering WEBS-1310 Panel Mount Kit

Ordering WEBS-2120 Wall Mount Kit Remark VESA 75/100

Remark DIN Rail H=35mm (w/o Rail)

147 System-WEBS Mounting Solution


PSU Reference Table
TYPE MODEL FORM DIMENSON POWER RANGE PAGE
FACTOR

Single GADIWA-P0901 DC/DC 60 x 45 x 15 mm 120W / ATX Output 149

ORION-A2501 Wide-
GADIWA-P9271 Regulator 60 x 45 x 22 mm
9-27V DC /
150
Range Regulator
Wide- 128W / 12~36V DC
GADIWA-3160 DC/DC 150 x 51 x 22.5 mm 151
Range / Input
Wide- 128W / 9-29V DC
GADIWA-3161 DC/DC 100 x 45 x 22.5 mm 152
Range / Input

ORION-D5501P Redundant GADIWA-N2360 mini-redundant 150 x 86 x 139.6 mm


360W / 18~30V DC
153
/ Input
100 x 190 x 40.5 mm
Single ORION-A2501 1U 250W / PFC / P4 154
3.93” x 7.48” x 1.60”
100 x 190 x 40 mm
Single ORION-A1501 1U 150W / PFC / P4 154
3.93” x 7.48” x 1.57”
ORION-D3202P
81.5 x 150 x 40.5 mm
Single ORION-A1501P Low-Noise 150W / ATX 155
3.2” x 5.9” x 1.6”
81.5 x 150 x 40.5 mm
Single ORION-A1801P Low-Noise 180W / ATX 155
3.2” x 5.9” x 1.6”
190 x100 x 70 mm
Single ORION-B3501P 2U 350W / PFC / P4 156
ORION-D4601P 7.48” x 3.94” x 2.8”
150 x 140 x 86 mm
Single ORION-D3501P PS/2 350W / PFC / P4 156
5.9” x 5.5” x 3.4”
150 x 140 x 86 mm
Single ORION-D4601P PS/2 460W / PFC / P4 157
5.9” x 5.5” x 3.4”
150 x 140 x 86 mm
ORION-D4602P Single ORION-D5501P PS/2
5.9” x 5.5” x 3.4”
550W / PFC / P4 157

ORION- 150 x 140 x 86 mm


Redundant PS/2 330W / DC / ATX 158
300DX/24/48 5.9” x 5.5” x 3.4”
ORION- mini-redundant 150 x 183 x 86 mm 300W / PFC / DC
Redundant 158
D3002DDP DC TO DC 5.9” x 7.2” x 3.4” / P4
150 x 190 x 84 mm
Redundant ORION-D3502P mini-redundant 320W / PFC / P4 159
MPM-842P 5.9” x 7.2” x 3.4”
150 x 140 x 86 mm
Redundant ORION-D4602P mini-redundant 400W / PFC / P4 159
5.9” x 5.5” x 3.4”
150 x140 x 86 mm 400W / Medical /
Single MPM-842P PS/2 160
5.9” x 5.5” x 3.4” ATX
198 x 93 x 40.5 mm 150W / Fanless /
MPI-815H Single MPI-815H OPEN FRAME
7.8” x 3.66” x 1.6” ATX
160

83.9 x 152.4 x 38.1 mm


Single MPI-810H OPEN FRAME 120W / ATX 161
3.3” x 6” x 1.5”
OPEN FRAME 83.9 x 152.4 x 38.1 mm
Single MPD-810H 120W / DC / ATX 161
DC TO DC 3.3” x 6” x 1.5”

MPI-810H Single MPE-008A-P OPEN FRAME


50.8 x 127 x 40 mm
2” x 5” x 1.57”
80W / ATX 162

128 x 81 x 40 mm
Single MPI-806H OPEN FRAME 60W / ATX 162
5.0” x 3.2” x 1.55”

Adapter 163

MPI-806H
Configuration Matrix 164

Industrial Power Supply 148


GADIWA-P0901 120W DC/DC Converter (12V/input,
ATX/output), Board Type

GADIWA-P0901 is a DC-DC converter for board type. It normally support 120Watts and maximum can reach to
150Watts. GADIWA-P0901 can save more space and cost, it’s not only capability for fan-less system but also
suitability for different application. Moreover, the converter is made and tested by automatic production line;
therefore, it can provide high quality and performance.

FEATURES Installation Image


 12V DC/input, plug into the ATX connector with board
output
 Compact and user-friendly design for installation and
maintenance
 Fan-less design for mission-critical application
 Small size for 1U or higher system to save space

SPECIFICATION
Input Voltage 12V (+5%/-4%)
Line Regulation 11.52V / 12.6V
Output 120Watts/ 150Watts peak
Efficiency >96% @ 12.3V
MTBF 836,407hrs @45°C, 592,361hrs @55°C
EMI & Safety Approval CE, FCC
Input Connector Mini-Fit 8 pin (P/N: B6902040)
Output Connector Mini-Fit 20 pin (P/N: B6902071)
Dimension (WxDxH) 60 x 45 x 15 mm

CHARACTERISTICS
Output Voltage Load Regulation Cross Regulation

+12V 0~7A 6.5A

+5V 0~6A 6A

+3.3V 0~6A 6A

+5Vsb 0~2A 1A

-12V 0~0.1A 0.1A

ORDERING GUIDE
GADIWA-P0901
120W DC/DC Converter (12V/input, ATX/output), Board Type

149 Industrial Power Supply


GADIWA-R9271 9V~27V/wide-input, 12V/output
Regulator, Board Type

GADIWA- R9271 is a wide input regulator for board type. GADIWA-R9271 can collocate with GADIWA-P0901
and GADIWA-1120 which are DC-DC converters; it’s easily to deploy critical application. The converter is made
and tested by automatic production line; therefore, it can provide high quality and performance. GADIWA-R9271
has special design for socket type fuse protection.

FEATURES Installation Image


 Compact and user-friendly design for installation and
maintenance
 Small size for 1U or higher system to save space
 Suitable for Car PC, Steamer, Truck, Boat and Adapter
 Special Design for Delay-Time
 Socket Type Fuse Protection

SPECIFICATION
Input Voltage 9V~27V
Line Regulation 9V~27V continuous, 7~30V<10 sec@cold start
Efficiency >95% @ 14V input
MTBF 577,768hrs @45°C, 409,990hrs @55°C
EMI & Safety Approval CE, FCC
Input Connector Mini-Fit 3 pin (P/N: B6902060)
Output Connector Mini-Fit 8 pin (P/N: B6902042)
Dimension (WxDxH) 60 x 45 x 22 mm

GADIWA-R9271
GADIWA-P0901
CHARACTERISTICS
Output Voltage Load Regulation Cross Regulation

+12V 12.3V @ 0~8.5A 12.3V @ 0~8.5A

ORDERING GUIDE
GADIWA-R9271
9V to 27V/Wide-input, 12V/output Regulator, Board Type

Industrial Power Supply 150


GADIWA-3160 128W DC/DC 12V~36V/wide-input,
ATX/output, Board Type Converter

GADIWA- 3160 is a wide input converter for board type. It normally support 128Watts and maximum can reach
to 160Watts. GADIWA-3160 can save more space and cost, it’s not only capability for fan-less system but also
suitability for different application. Gadiwa-3610 also have UL certification and watch dog function design, it’ll be
easy to deploy any critical application.

FEATURES Installation Image


 12~36V/Wide-input, plug into the ATX connector with
board output
 Compact and user-friendly design for installation and
maintenance
 Fan-less design for mission-critical application
 Small size for 1U or higher system to save space
12V output
 Watchdog Timer function
20 pin output
SPECIFICATION 6 pin input
Input Voltage 12V~36V
Line Regulation 11.5V~36V/input
Output 128Watts / 160Watts Peak
Efficiency >85% @ 12V
MTBF 245.000hrs @45°C, 192,000hrs @55°C
EMI & Safety Approval UL, CE, FCC
Input Connector Mini-Fit 6 pin (P/N: B6902400)
Output Connector - Mini-Fit 20 pin (P/N: B6902410)
- 12V output (P/N: B6902420)
Dimension (WxDxH) 150 x 51 x 22.5 mm

CHARACTERISTICS
Output Voltage Current Range Current Range

+12V 0~8A 0~6A

+5V 0~8A 0~6A

+3.3V 0~7A 0~5.25A

+5Vsb 0~2A 0~1.5A

-12V 0~0.15A 0~0.12A

ORDERING GUIDE
GADIWA-3160
128W DC/DC 12V~36V/wide-input, ATX/output, Board Type Converter

151 Industrial Power Supply


GADIWA-3161 128W DC/DC 9V~29V/wide-input,
ATX/output, Board Type Converter

GADIWA- 3161 is a wide input board type converter. It normally support 128Watts and maximum can reach to
160Watts. GADIWA-3160 can save more space and cost, it’s not only capability for fan-less system but also
suitability for different application. Besides, the converter is made and tested by automatic production line;
therefore, it can provide high quality and performance.

FEATURES Installation Image


 9~29V/Wide-input, plug into the ATX connector with
board output
 Compact and user-friendly design for installation and
maintenance
 Fan-less design for mission-critical application
 Small size for 1U or higher system to save space
12V output
 Socket Type Fuse Protection

SPECIFICATION
Input Voltage 9V~29V, 6~9V workable with derating 6 pin input 20 pin output
Line Regulation 9V~29V/input
Output 128Watts / 160 Watts Peak
Efficiency >85% @ 12V input @ 120W output
EMI & Safety Approval CE, FCC
Input Connector Mini-Fit 6 pin (P/N: B6902430)
Output Connector - Mini-Fit 20 pin (P/N: B6902410)
- 12V output (P/N: B6902420)
Dimension (WxDxH) 100 x 45 x 22.5 mm

CHARACTERISTICS
Output Voltage Load Regulation Cross Regulation

+12V 0~6A 6A

+5V 0~6A 6A

+3.3V 0~6A 6A

+5Vsb 0~2A(Share with +5V) 2A(Share with +5V)

-12V 0~0.1A 0.1A

ORDERING GUIDE
GADIWA-3161
128W DC/DC 9V~29V/wide-input, ATX/output, Board Type Converter

Industrial Power Supply 152


360W Mini-Redundant PSU,
GADIWA-N2360 18~30VDC Wide-Rang/input,
ATX/output

GADIWA-N2360 360W DC-DC PS/2 mini redundant is an innovation stage to Portwell. It’s not only a design
of fan-less but also with 3+1 modules in PS/2 size. GADIWA-N2360 provides MCU and LED alarm design to
help you monitor system status and installation; it also provides connector customization to meet any critical
application. GADIWA-N2360 is made & tested by automatic production line; therefore, can provide high quality
and performance.

FEATURES Installation Image


 360W DC-DC PS/2 mini-redundant suitable for embedded
system
 18V~30V wide-input, plug into ATX connector fit automotive
and boat
 Compact and fan-less design fulfill mission-critical application
 LED alarm is easy for installation and maintenance
 MCU design help to monitor system status, temperature and
performance

SPECIFICATION
Input Voltage 18~30VDC
86
Input Current 17.6 A Front View
Efficiency 85%
Holdup Time 16 ms. at full load
Over Voltage Protection [email protected]; 5V@7V; 12V@15V
Temperature/Humidity Operating: 0 ~ 45°C, 20 ~ 90%RH
Storage: -20 ~ 60°C, 5 ~ 95%RH
150

Dimension (WxDxH) 150 x 150.1 x 86 mm

DC OUTPUT
+5V +3.3V +12V -5V -12V +5Vsb
Max. Load 21A 15A 18A 0.5A 0.1A 2A 10.50 139.60
Rear View
Min. Load 0A 0A 0A 0A 0A 0A
Load Reg. ±5% ±5% ±5% ±10% ±10% ±5%
Line Reg. ±5% ±5% ±5% ±10% ±10% ±5%
Ripple 10mv 10mv 10mv 10mv 10mv 10mv
Noise 30mv 25mv 30mv 20mv 20mv 25mv

ORDERING GUIDE
GADIWA-N2360
360W Mini-Redundant PSU, 18~30VDC Wide-Rang/input, ATX/output

153 Industrial Power Supply


ORION-A2501 250W 1U ATX power supply
with active PFC

FEATURES
 Low profile power supply suitable for 1U and
node chassis
 Active PFC, full-range input
® ®
 Support for Intel Pentium 4 processor
 Total output power of +5V, +3.3V and +12V
is 234W

ORDERING GUIDE
SPECIFICATION  ORION-A2501
Input Voltage 90V ~ 264V AC, full range 250W 1U ATX power supply with active PFC
Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 65%

Holdup Time 16 ms at full load DC OUTPUT


Over Voltage Protection +5V: 5.4 ~ 6.5V; +3.3V: 3.9 ~ 4.4V; +12V: 13.6 ~ 15.6V
+5V +3.3V +12V -5V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 160%
Max. Load 24A 20A 12A 0.5A 0.5A 1.5A
MTBF 105,405 hrs Min. Load 3A 1A 2A 0A 0A 0.1A
EMI & Safety Approval UL, cUL, TUV, CE, FCC Load Reg. ±5% ±5% ±8% ±10% ±10% ±5%

Temperature/Humidity Operating: 5 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1% ±1%
Storage: -20 ~ 60oC, 5 ~ 95%RH
Ripple &
80mv 80mv 120mv 150mv 150mv 80mv
Dimension (WxDxH) 100 x 190 x 40.5 mm; 3.93” x 7.48” x 1.59” Noise

ORION-A1501 150W 1U ATX power supply with


active PFC

FEATURES
 Low profile power supply suitable for 1U and
node chassis
 Active PFC, full-range input
 Higher +5V and +3.3 V output
 Max. +5V standby output is 1.5A

ORDERING GUIDE
 ORION-A1501
SPECIFICATION 150W 1U ATX power supply with active PFC
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 4A@115V, 2A@230V


DC OUTPUT
Efficiency > 65%
+5V +3.3V +12V -5V -12V +5Vsb
Holdup Time 16 ms. at full load Max. Load 14A 10A 6A 0.5A 0.8A 1.5A
Over Voltage Protection +5V: 5.6~6.6V; +3.3V: 3.6~4.2V; +12V: 13.2~14.6V Min. Load 2A 1A 1A 0.1A 0.1A 0.1A
Over Power/Load Protection Output power over 110% ~ 160% Max. Watt. 135W 135W 135W 2.5W 9.6W 7.5W

MTBF 84,228 hrs Load Reg. ±5% ±5% ±5% ±5% ±10% ±5%

UL, cUL, TUV, CE, FCC Cross Reg. ±5% ±5% ±5% ±5% ±10% ±5%
EMI & Safety Approval
Line Reg. ±1% ±1.5% ±0.8% ±1% ±1% ±1%
Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple ±1% ±1.8% ±1% ±2% ±1% ±1.2%
Dimension (WxDxH) 100 x 190 x 40 mm; 3.9” x 7.48” x 1.57” Noise ±1.4% ±2.1% ±1% ±2% ±1% ±1.4%

Industrial Power Supply 154


ORION-A1501P 150W Flex form factor power
supply with active PFC

FEATURES
 1U Flex form factor power supply
 Full-range input with active PFC
 Max. 5V output is 13A
 Low noise

ORDERING GUIDE
SPECIFICATION  ORION-A1501P
150W PSU. Active PFC. Low Noise
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 7.5A@115V, 3.5A@230V

Efficiency > 71%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 4.75 ~ 5.25V; +3.3V: 3.14 ~ 3.47V; +12V: 11.4V ~ 12.6V
+5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150% Max. Load 13A 10A 10A 0.5A 2A

MTBF >160,000 hrs Min. Load 0.3A 0.3A 1A 0A 0A

EMI & Safety Approval TUV, UL/cUL Load Reg. ±5% ±5% ±5% ±10% ±5%

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple 50mv 50mv 120mv 120mv 50mv
Dimension (WxDxH) 81.5 x 150 x 40.5 mm; 3.2” x 5.9” x 1.6” Noise 50mv 50mv 120mv 120mv 50mv

ORION-A1801P 180W Flex form factor power


supply with active PFC

FEATURES
 1U Flex form factor power supply
 Full-range input with active PFC
 Max. +5V output is 16A
 Low noise

ORDERING GUIDE
SPECIFICATION  ORION-A1801P
180W PSU. Active PFC. Low Noise
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 75%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 5.7 ~ 6.5V; +3.3V: 3.9 ~ 4.3V; +12V: 13.6 ~ 15V +5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150% Max. Load 16A 14A 14A 0.5A 2A

MTBF >130,000 hrs Min. Load 0.3A 0.3A 1.5A 0A 0A

EMI & Safety Approval UL Load Reg. ±5% ±5% ±5% ±10% ±5%

Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Temperature/Humidity
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple 50mv 50mv 120mv 120mv 50mv
Dimension (WxDxH) 81.5 x 150 x 40.5 mm; 3.2” x 5.9” x 1.6” Noise 50mv 50mv 120mv 120mv 50mv

155 Industrial Power Supply


ORION-B3501P 350W 2U ATX power supply
with active PFC

FEATURES
 2U ATX power supply suitable for 2U and larger
chassis
 Active PFC, full-range input
 Support Intel® Pentium® 4 processor
 Max. +5V standby output is 2A
 Max. +12V output is 18A

ORDERING GUIDE
SPECIFICATION  ORION-B3501P
Input Voltage 90V ~ 264V AC, full range 350W 2U ATX power supply with active PFC

Input Frequency 47 ~ 63 Hz

Input Current 10A@115V, 6A@230V

Efficiency > 67%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 6.5 ~ 7.0V; +3.3V: 4.5V; +12V: 14.5V
+5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150% Max. Load 25A 17A 25A 0.5A 2A

MTBF 100,000 hrs Min. Load 1.0A 1.0A 1.0A 0.25A 0A

EMI & Safety Approval UL, CB, TUV, CE, FCC Load Reg. ±5% ±5% ±5% ±10% ±5%

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1.5% ±0.4% ±0.4% ±1%
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple 50mv 50mv 120mv 120mv 50mv
Dimension (WxDxH) 200 x 100 x 70 mm; 3.94” x 8.3” x 2.8” Noise 100mv 100mv 150mv 200mv 100mv

ORION-D3501P 350W ATX power supply with


active PFC

FEATURES
 PS/2 ATX power supply, suitable for 2U, node
chassis, and larger chassis
 Active PFC, full-range input
 Total output power of +5V,+3.3V and +12V is 326W
 Max. +12V standby output is 18A
 Max. +5V load output is 40A

SPECIFICATION ORDERING GUIDE


Input Voltage 90V ~ 264V AC, full range
 ORION-D3501P
Input Frequency 47 ~ 63 Hz 350W PS/2 ATX power supply with active PFC
Input Current 6A@90V

Efficiency > 68%

Holdup Time 17 ms. at full load @25oC DC OUTPUT


Over Voltage Protection +5V@ 7V; +3.3V@ 4.3V; +12V@ 15.6V

Output power over to 110%~140% +5V +3.3V +12V -5V -12V +5Vsb
Over Power/Load Protection
Max. Load 18A 20A 18A 0.3A 0.5A 2.5A
MTBF 75,145 hrs
Min. Load 1A 1A 1A 0A 0A 0A
EMI & Safety Approval UL, TUV, CE, FCC, CB, CSA, SEMKO, FIMKO,
NEMCO, DIMCO Load Reg. ±5% ±5% ±5% ±10% ±10% ±5%

Operating: 0 ~ 50oC, 20 ~ 85%RH Line Reg. ±1% ±1.5% ±1% ±2.4% ±1% ±1%
Temperature/Humidity
Storage: -40 ~ 70oC, 10 ~ 90%RH Ripple ±1% ±1.5% ±0.8% ±3% ±1.25% ±1%
Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4” Noise ±1% ±1.5% ±0.8% ±3% ±1.25% ±1%

Industrial Power Supply 156


ORION-D4601P 460W PS/2 ATX power supply
with active PFC

FEATURES
 PS/2 ATX power supply suitable for 2U
and larger chassis
 Active PFC, full-range input
 Support Intel® Pentium® 4 processor
 Max. +12V standby output is 30A

ORDERING GUIDE

SPECIFICATION  ORION-D4601P
460W PS/2 ATX power supply with active PFC
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 9A@115V, 5A@230V

Efficiency > 60%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 5.7 ~ 7.0V; +3.3V: 3.9 ~ 4.5V; +12V: 13.6 ~ 16.0V
+5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150% Max. Load 20A 22A 16A 0.5A 2.5A

MTBF 100,000 hrs Min. Load 0.5A 0.3A 1A 0A 0A

EMI & Safety Approval UL, TUV Reg. ±5% ±5% ±5% ±10% ±5%

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Ripple 50mv 50mv 120mv 120mv 50mv
Storage: -20 ~ 60oC, 5 ~ 95%RH Noise 50mv 50mv 120mv 120mv 50mv
Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4”

ORION-D5501P 550W PS/2 ATX power supply


with active PFC

FEATURES
 PS/2 ATX power supply suitable for 2U and larger
chassis
 Active PFC, full-range input
 Support Intel® Pentium® 4 processor
 Max. +12V output is 38A

ORDERING GUIDE

SPECIFICATION  ORION-D5501P
550W PS/2 ATX power supply with active PFC
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 9.5A@115V, 5.5A@230V

Efficiency > 60%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 5.7 ~ 7.0V; +3.3V: 3.9 ~ 4.5V; +12V: 13.6 ~ 16
+5V +3.3V +12V -5V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150% Max. Load 29A 27A 18A 0.3A 0.8A 2A

MTBF 100,000 hrs Min. Load 3A 0.4A 1A 0A 0A 0A

EMI & Safety Approval UL, cUL, TUV, CE, FCC Reg. +5% -4% +5% -4% +5% -4% ±10% +9% -5% +5% -4%

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Ripple 50mv 50mv 120mv 120mv 120mv 50mv
Storage: -20 ~ 60oC, 5 ~ 95%RH Noise 50mv 50mv 120mv 120mv 120mv 50mv
Dimension (WxDxH) 150 x 165 x 86 mm; 5.9” x 6.5” x 3.4”

157 Industrial Power Supply


ORION-300DX/24/48 300W -48V/24V DC input
DC/DC PS/2 ATX power supply

FEATURES
 PS/2 ATX power supply suitable for 2U and
larger chassis
 ORION-300DX/24 for +24V DC input, suitable
for vehicle applications
 ORION-300DX/48 for -48V DC input, suitable for
telecommunication applications
 Max. -12V output is 2A, suitable for CTI application

ORDERING GUIDE
 ORION-300DX/48
300W -48V DC input DC/DC PS/2 ATX power supply
SPECIFICATION  ORION-300DX/24
300W 24V DC input DC/DC PS/2 ATX power supply
Input Voltage -40V~-72V DC for ORION-300DX/48
19V~32V DC for ORION-300DX/24

Input Current 10A@-48V, 20A@24V DC input DC OUTPUT


Efficiency > 65%
+5V +3.3V +12V -5V -12V +5Vsb
Holdup Time 16 ms
Max. Load 30A 15A 15A 2A 2A 1.2A
Over Voltage Protection +5V: 5.7 ~ 7.0V
Min. Load 2A 0.3A 0.5A 0A 0A 0A
MTBF 100,000 hrs
Load Reg. ±5% ±3% ±5% ±10% ±5% ±5%
EMI & Safety Approval UL, TUV, CSA Cross Reg. ±5% ±3% ±5% ±10% ±5% ±5%
Temperature/Humidity Operating: 0 ~ 40oC, 10 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1% ±1%
Storage: -60 ~ 70oC, 5 ~ 95%RH
Ripple ±1% ±1.5% ±1% ±2% ±1% ±1%
Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4”
Noise ±1% ±1.5% ±1% ±2% ±1% ±1%

ORION-D3002DDP 300W -38VDC to -72VDC input DC/DC


mini-redundant ATX power supply

FEATURES
 Mini-redundant DC to DC power supply suitable for
2U and larger chassis
 Active PFC, full-range input
 -38VDC to -72VDC input for telecommunication
applications
 Test equipment for telecommunication applications

ORDERING GUIDE
 ORION-D3002DDP
300W DC-DC W/Active PFC, redundant power supply

SPECIFICATION DC OUTPUT
Input Voltage -38~-72VDC

Input Current 11A +5V +3.3V +12V -5V -12V +5Vsb


Efficiency > 58% Max. Load 30A 22A 11A 1A 1A 1.5A

Holdup Time 16 ms. at full load Min. Load 2A 0.3A 0.5A 0.05A 0.05A 0A

Over Voltage Protection [email protected]; 5V@7V; 12V@16V Load Reg. ±5% ±5% ±5% ±10% ±10% ±5%

Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±5% ±5% ±5% ±10% ±10% ±5%
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple 50mv 50mv 120mv 130mv 100mv 50mv
Dimension (WxDxH) 150 x 183 x 86 mm; 5.9” x 7.2” x 3.4” Noise 100mv 100mv 150mv 200mv 200mv 100mv

Industrial Power Supply 158


ORION-D3502P 350W ATX mini-redundant
with active PFC power supply

FEATURES
 Mini-redundant ATX power supply suitable for 2U
and larger chassis
 350W output
 Active PFC, full-range input

ORDERING GUIDE
SPECIFICATION  ORION-D3502P
350W PS/2, w/active PFC, ATX power supply
Input Voltage 100V~240V AC

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 80% DC OUTPUT


Holdup Time 16 ms. at full load

Over Voltage Protection [email protected]; [email protected]; [email protected] +5V +3.3V +12V -5V -12V +5Vsb
Max. Load 20A 20A 18A 0.5A 0.8A 2A
MTBF > 100,000 hrs
Min. Load 0.5A 0.5A 0.5A 0A 0A 0A
EMI & Safety Approval UL, cUL, TUV, CE, FCC
Load Reg. ±5% ±5% ±5% ±10% ±5% ±5%
Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH
Storage: -20 ~ 60oC, 5 ~ 95%RH Cross Reg. ±5% ±5% ±5% ±10% ±5% ±5%

Dimension (WxDxH) 150 x 190 x 84 mm; 5.9” x 7.2 x 3.4” Line Reg. ±1% ±1% ±1% ±1% ±1% ±1%
Ripple 50mv 50mv 120mv 200mv 200mv 50mv
Noise 50mv 50mv 120mv 200mv 200mv 50mv

ORION-D4602P
460W+460W mini-redundant switching
power supply with active PFC

FEATURES
 Mini-redundant power supply suitable for 2U/4U
and larger chassis
 Active PFC, full-range input

 Two independent AC inputs

ORDERING GUIDE
 ORION-D4602P
460W+460W mini-redundant power supply
SPECIFICATION with active PFC
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 9A@115V, 5A@230V DC OUTPUT


Efficiency > 65%

Holdup Time 20 ms. at full load +5V +3.3V +12V -12V +5Vsb
Max. Load 25A 25A 30A 0.8A 2A
Over Voltage Protection +5V: 5.6 ~ 6.5V; +3.3V: 3.8 ~ 4.3V; +12V: 13.6 ~ 15.6V
Min. Load 2A 2A 2.5A 0A 0A
Over Power/Load Protection Output power over 110% ~ 130% on +3.3V/+5V;
120% ~ 150% on +12V Max. Watt. 370W 370W 370W 9.6W 10W

MTBF 100,000 hrs Load Reg. ±5% ±5/-3% ±5% ±5% ±10%

EMI & Safety Approval UL, TUV Cross Reg. ±5% ±5/-3% ±5% ±5% ±5%

o
Operating: 0 ~ 40 C, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Temperature/Humidity
Storage: -40 ~ 70oC, 5 ~ 95%RH Ripple ±1% ±1% ±1% ±1% ±1%
Dimension (WxDxH) 150 x 190 x 86 mm; 5.9” x 7.5” x 3.4” Noise ±1% ±1% ±1% ±2% ±1%

159 Industrial Power Supply


MPM-842P 400W PS/2 ATX power supply
with active PFC

FEATURES
 PS/2 ATX power supply suitable for 2U and larger
chassis
 Active PFC, full-range input
 Support Intel® Pentium® 4 processor
 Max. 12V output is 22A
 Medical level power supply

ORDERING GUIDE

SPECIFICATION  MPM-842P
400W PS/2 ATX power supply with active PFC
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 7.5A@115V, 3.5A@230V

Efficiency > 71%

Holdup Time 16 ms at full load DC OUTPUT


Over Voltage Protection +5V: 4.75 ~ 5.25V; +3.3V: 3.14 ~ 3.47V; +12V: 11.4V ~ 12.6V
+5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150%
Max. Load 21A 22A 22A 0.8A 1.5A
MTBF >160,000 hrs Min. Load 0.3A 0.5A 1A 0A 0.1A
EMI & Safety Approval TUV, UL/cUL Load Reg. ±5% ±5% ±5% ±5% ±5%
Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Storage: -20 ~ 60oC, 5 ~ 95%RH
Ripple &
50mv 50mv 120mv 120mv 50mv
Dimension (WxDxH) 150 x 140 x 86 mm; 5.9” x 5.5” x 3.4” Noise

MPI-815H
150W 1U ATX power
supply with active PFC

FEATURES
 1U ATX power supply
 Full-range input
 Max. +5V standby output is 14A
 Thermal protection
 +5V standby & remote On/Off

ORDERING GUIDE
SPECIFICATION  MPI-815H
150W fanless, 1U, ATX power supply
Input Voltage 90V ~ 264V AC, full range

Input Frequency 47 ~ 63 Hz

Input Current 6A@115V, 3A@230V

Efficiency > 75%

Holdup Time 16 ms at full load DC OUTPUT


Over Voltage Protection +5V: 5.7 ~ 6.5V; +3.3V: 3.9 ~ 4.3V; +12V: 13.6 ~ 15
+5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 110% ~ 150%
Max. Load 14A 12A 10A 1A 1.5A
MTBF >130,000 hrs Min. Load 1A 0A 0A 0A 0A
EMI & Safety Approval UL Load Reg. ±2% ±5% ±5% ±5% ±5%
Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Storage: -20 ~ 60oC, 5 ~ 95%RH
Ripple &
198 x 93 x 40.5 mm; 7.8” x 3.66” x 1.6” 50mv 50mv 100mv 150mv 100mv
Dimension (WxDxH) Noise

Industrial Power Supply 160


MPI-810H 120W universal input open-frame
power supply

FEATURES
 3.3” x 6” open-frame power supply suitable for
node chassis
 Five rails outputs
(+5V, +12V, -12V, +3.3V & +5Vsb)
 Universal AC input
 Higher +5V output (14A)

ORDERING GUIDE
SPECIFICATION
90 ~ 260V AC
 MPI-810H
Input Voltage
120W universal input open-frame power supply
Input Frequency 47 ~ 63 Hz

Input Current 3A@115VAC or 1.5A@230VAC

Efficiency > 70%

Holdup Time 16 ms at full load


DC OUTPUT
Over Voltage Protection +5V: 5.6 ~ 6.6V; +3.3V: 3.6 ~ 4.2V; +12V: 13.2 ~ 14.6V

Over Power/Load Protection Output power over 110% ~ 160% +5V +3.3 +12V -12V +5Vsb

MTBF 130,000 hrs Max. Load 14A 12A 6A 1A 0.75A

EMI & Safety Approval UL, VDE, CSA Min. Load 1A 0A 0A 0A 0A

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 90%RH Load Reg. ±3% ±5% ±5% ±5% ±5%
Storage: -20 ~ 70oC, 5 ~ 95%RH Line Reg. ±1% ±1% ±1% ±1% ±1%
Dimension (WxDxH) 83.8 x 152.4 x 38.1 mm; 3.3” x 6” x 1.5” Ripple 50mv 50mv 120mv 200mv

MPD-810H 120W universal input open-frame,


DC to DC power supply

FEATURES
 Open-frame DC to DC power supply suitable for
node chassis
 Five rails outputs (+5V, +12V, -12V, +3.3V & +5Vsb)
 10~30 VDC input
 Higher +5V output (10A)

ORDERING GUIDE
SPECIFICATION
Input Voltage 10V ~ 30V DC  MPD-810H
120W 10~30VDC input open-frame power supply
Input Frequency 47 ~ 63 Hz

Input Current 18A@10V DC

Efficiency > 70%

Holdup Time 16 ms at full load


+5V: 5.6 ~ 6.6V; +3.3V: 3.6 ~ 4.2V; +12V: 13.2 ~ 14.6V
DC OUTPUT
Over Voltage Protection
Over Power/Load Protection Output power over 110% ~ 160% +5V +3.3 +12V -12V +5Vsb

MTBF 130,000 hrs Max. Load 10A 8A 4A 1A 0.75A

EMI & Safety Approval UL Min. Load 1A 0A 0A 0A 0A

Temperature/Humidity Operating: 0 ~ 50oC, 20 ~ 90%RH Load Reg. ±2% ±5% ±5% ±5%
Storage: -20 ~ 70oC, 5 ~ 95%RH Line Reg. ±2.5% ±2.5% ±2.2% ±2.5% ±2.5%
Dimension (WxDxH) 83.8 x 152.4 x 38.1 mm; 3.3” x 6” x 1.5” Ripple 100mv 100mv 120mv 200mv

161 Industrial Power Supply


MPE-008A-P 80W universal input open-frame
power supply

FEATURES
 60W convection cooling and 80W forced
air-cooling
 Conductive EMI Meets CISPR/FCC Class B
 2” x 5” compact size dual output
 A ray leakage current <100uA

ORDERING GUIDE
SPECIFICATION  MPE-008A-P
Input Voltage 90V ~ 264V AC 80W universal input open-frame power supply

Input Frequency 47 ~ 63 Hz

Input Current 2A@115V; 1A@230V

Efficiency > 80%


DC OUTPUT
Holdup Time 16 ms at full load

Over Voltage Protection Automatic recovery up on of over voltage condition. Trigger 5V +12V
point is at about 5.8V ~ 6.8V
Max. Load 5A 5A
MTBF 130,000 hrs Min. Load 0A 0A
EMI & Safety Approval UL, cUL, TUV, CE, CCC Load Reg. ±3% ±3%
Temperature/Humidity Operating: -20 ~ 50oC, 5 ~ 95%RH Line Reg. ±1% ±1%
Storage: -20 ~ 85oC, 5 ~ 95%RH
Ripple 50mv 120mv
Dimension (WxDxH) 50.8 x 127 x 40 mm; 2.0” x 5” x 1.57”
Noise 50mv 120mv

MPI-806H 60W universal input open-frame


power supply

FEATURES
 80W with 8.6CFM forced air-cooling
 Compact size with ATX output
 PG/PF signal
 +5V standby & remote on/off

ORDERING GUIDE
 MPI-806H
SPECIFICATION 60W ATX, open-frame power supply
Input Voltage 90V ~ 264V AC

Input Frequency 47 ~ 63 Hz

Input Current 2A@115V, 1A@230V

Efficiency > 70%


DC OUTPUT
Holdup Time 20 ms. at full load

Over Voltage Protection +5V: 5.15 ~ 6.45V; +3.3V: 3.7 ~ 4.5V; +12V: 12.6 ~ 15.6V +5V +3.3V +12V -12V +5Vsb
Over Power/Load Protection Output power over 120% Max. Load 8A 6A 3A 0.5A 0.75A

MTBF 130,000 hrs Min. Load 1A 0A 0A 0A 0A

UL, TUV Load Reg. ±2% ±4% ±4% ±5% ±4%


EMI & Safety Approval
Line Reg. ±1% ±1% ±1% ±1% ±1%
Temperature/Humidity Operating: 0 ~ 40oC, 20 ~ 90%RH
Storage: -20 ~ 60oC, 5 ~ 95%RH Ripple 50mv 50mv 120mv 120mv 120mv

Dimension (WxDxH) 128 x 81 x 40 mm; 5.0” x 3.2” x 1.55” Noise ±1% ±1% ±1% ±2% ±1%

Industrial Power Supply 162


Adapter
APH-3019-40W
SPECIFICATION
AC Input Voltage 90V ~ 264V

DC Output Voltage 12V

Output Load 3.33A

Output Regulation 11.4V~12.6V

Efficiency >83.1%, 115V@60Hz, 230V@50Hz

MTBF 100,000 hrs@25°C

EMI & Safety Approval UL, cUL, TUV, CE, FCC, CB

Dimension 110(w) x 50(d) x 32(h) mm

APH-3020-60W
SPECIFICATION
AC Input Voltage 90V ~ 264V

DC Output Voltage 12V

Output Load 5A

Output Regulation 11.4V~12.6V

Efficiency >87%, 115V@60Hz, 230V@50Hz

MTBF 60,000 hrs@25°C

EMI & Safety Approval UL, cUL, TUV, CE, FCC, CB

Dimension 110(w) x 62(d) x 32(h) mm

APH-3023-96W
SPECIFICATION
AC Input Voltage 90V ~ 264V

DC Output Voltage 12V

Output Load 8A

Output Regulation 11.4V~12.6V

Efficiency >81%, 100V@60Hz, 240V@50Hz

MTBF 100,000 hrs@25°C

EMI & Safety Approval UL, cUL, TUV, CE, FCC, CB

Dimension 174(w) x 65(d) x 37(h) mm

APH-3011-150W
SPECIFICATION
AC Input Voltage 90V ~ 264V

DC Output Voltage 12V

Output Load 12.5A

Output Regulation 11.4V~12.6V

Efficiency >86%, 100V@60Hz, 240V@50Hz

MTBF 43,800 hrs@25°C

EMI & Safety Approval UL, cUL, TUV, CE, FCC, CB

Dimension 171(w) x 72(d) x 40(h) mm

163 Industrial Power Supply


Configuration Matrix
AREMO- AREMO- AREMO- AREMO- AREMO- AREMO- AREMO- AREMO-
Model RPC-500NC PRC-4207
2173-MX 2173P 2173EB 3194 3194E 4196 6163 8164

ATX M/B V V V V V

Micro ATX V V V V V V

Server Board V V

PEB-7710 V

PBP-05V464/J V

PBP-06P3 V

PBP-06P4

PBP-06P564 V V

PBP-06V4 V

PBP-08A7 V

PBP-08P3 V

PBP-08P4 V

PBP-13D4 V V V

PBP-14A7 V V V

PBP-14AC V V V

PBP-14AC-B V V V

PBP-14P4 V V V

PBP-14PD64 V V

PBP-14R4 V V V

PBP-18D4

PBP-19AC

PBP-19AI

PBP-19P4

PBPE-06V V

PBPE-13A8 V

ORION-D4602P V V V V V V V V

ORION-300DX/24/48 V V V V V V V V V

ORION-D4201P V V V V V

ORION-B3501P V

ORION-B3502 V

ORION-D3502P V V V V V V V V

ORION-D3501P V V V V V V V V V

ORION-D4601P V V V V V V V V

ORION-D5501P V V V V V V V V

FSP350-60GLC V V V V V V V V V

Industrial Power Supply 164


Accessory
Embedded System Integration Service
In order to help improve our customer's product time to market, Portwell provides the following services
for the Embedded Computing Platform.
These services are provided for both board support and system integration, and are available to our valued
customers who work with our world-class ecosystem and alliance program for embedded computing.
The three main services include:
1. Panel Kit service
This service focuses on the Interactive Client segment -- defined by Intel IPD as users of display-oriented applications such as POS/
ATM/KIOSK/Medical/Gaming/E-payment -- and is supplemented by the 2001 Portwell Alliances with a first tier LCD maker in Taiwan
to provide three year longevity support, panel kit for most of Portwell embedded system boards, with customized video BIOS, and Intel
Embedded Graphic Driver (IEGD) by customer request.

2. Embedded OS board support package


Portwell joins the Microsoft Windows Embedded Partner (WEP) program and works with chipset and device silicon venders to provide
customers with this board support package (BSP). Customers can now focus their application software to shorten the system developing
cycle and still maintain a lower total cost of ownership (TCO).

3. Peripherals integration and system level thermal solution


Portwell can provide consulting service and deliverable solution for peripherals integration upon customer’s request. Our customer
service engineering team can even be your window to leverage the IT infrastructure of the greater China area.

Display Solution
Panel Kit service
Portwell focus on AUO Industrial Flat Panel Display featuring high brightness, 3-year longevity and great price competition. We
manage standard kits in stock to fulfill customers' time-critical orders. We also provide panel kit by different makers like Sharp,
Toshiba, NEC and LG to meet different requirements per specific applications. To order, customers may fill out a special panel
support request form and send it through to our account sales.

Standard Panel Kit for Power Embedded System Board for AUO LCD

Panel AUO 8.4” AUO 10.4” AUO 12.1” AUO 15” AUO 17” AUO 19” AUO 20.1”
Model G084SN05 V0 G104SN03 V0 G121SN01 V0 G150XG01 V0 M170EG01 V0 M190EN04 V1 M201UN02 V2

PEB-3715 AL1-052 AL1-050 AL1-051 AL1-047 AL1-053 AL1-062 AL1-061

PEB-3730/32 AL1-056 AL1-054 AL1-055 AL1-048 AL1-057 AL1-069 AL1-060

PEB-3718 AL1-070 AL1-071 AL1-072 AL1-073 x x x

Touch Screen service


Portwell works with worldwide touch screen makers like Elo/Tyco and 3M. For cost effective solution, Portwell
provides feasibility for
1 Required communication interface for Touch board, like RS232 or USB

2 Required size of Touch screen

3 Required actual application for suitable touch screen model, like resistive or capacitive

165 Industrial Power Supply


EZCool
A reliable thermal solution of processor is always highly appreciated for most
applications. The reliable solution is not only about whether the processor over its
thermal specification or keep its temperature under protection point but also noise
and weight related. EZCool is the reliable thermal solution for Intel® CoreTM 2 Duo
processor, Pentium® 4 651 and Celeron® D 352 and so on that Thermal Design
Power (TDP) does not over 65W because of it’s compact size, silent cooling fan
and fixing mechanism.

SPECIFICATION
Socket Type Socket LGA 775 (CoreTM 2 Duo, Celeron® 440)

Heat Sink Dimension 90 x 90 x 18mm (L x W x H)

Fan Dimension 55.5x11.3 mm (compatible with 80mm fan)

Heat Sink Material Aluminum extrusion base and fins

Fan Speed 5.76 CFM (At zero pressure and 25oC, rated speed)

Fan Air Pressure 9.11 mmH2O (At zero static pressure and 25oC, rated speed)

Fan Life Expectancy 40,000 hours at 45oC

Bearing Type Ball Bearing

Voltage Rating 12 VDC

Input Current 0.3 A Max. (At 25oC, in free air rated voltage)
ORDERING GUIDE
Noise Level 39.3 dBA
Part # Model Name & Description Connector 3 pin

Heat Sink Weight 136.4 g (included fasteners)


B9970620 EZCool
High efficiency and low profile cooler for Fan Weight 13.6 g
CoreTM 2 Duo processor
Thermal Interface Material SC102

FEATURES
Along with Intel®’s CoreTM Mircoarchitecture and advanced manufacturing technologies, processor Thermal Design Power
(TDP) was lower from 85~130W to 65W only, and even lower for single core processor in Q3 this year. As a result, Portwell is
able to design a reliable cooler that can fits most applications demanding.

Compact Size Bending Prevention


EZCool is just one of third height of boxed cooler that benefits applications Larger preload of cooler causes the main board bending and it could
that need low profile cooler. introduce permanent damage to the PCB (Print Circuit Board) and traces
on it. With back plate conjunction, EZCooler makes no defection of board.

61mm

20.24mm

Twist Avoidance Semi-symmetric Design


Main board fixed vertically in chassis instead of horizontally such as PICMG The semi-symmetric heat sink design allows air flow thru dual directions
1.X SBC/SHB can be twisted because of the weight of cooler. It damages that can help ventilation of other key components nearby and fully lever-
SBC/SHB badly once the platform vibrates or shakes in the same direction. age system air flow that draw from outside of the chassis.

Industrial Power Supply 166

You might also like