Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    FT200WV

    Uploaded by

    data1plasticir
    FT200WV is a homopolymer polypropylene with good mold release and nucleation properties as well as antistatic additives. It has excellent rigidity and hardness, making it suitable for uses like housewares, caps, and closures as well as fast-cycle injection molding. It has a nominal melt flow of 20 g/10 min and typical properties including a tensile strength at yield of 5,600 psi, elongation at yield of 8%, and flexural modulus of 255,000 psi. This resin meets FDA requirements for food contact.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FT200WV

    Uploaded by

    data1plasticir
    45 views1 page
    FT200WV is a homopolymer polypropylene with good mold release and nucleation properties as well as antistatic additives. It has excellent rigidity and hardness, making it suitable for uses like housewares, caps, and closures as well as fast-cycle injection molding. It has a nominal melt flow of 20 g/10 min and typical properties including a tensile strength at yield of 5,600 psi, elongation at yield of 8%, and flexural modulus of 255,000 psi. This resin meets FDA requirements for food contact.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    FT200WV is a homopolymer polypropylene with good mold release and nucleation properties as well as antistatic additives. It has excellent rigidity and hardness, making it suitable for uses like housewares, caps, and closures as well as fast-cycle injection molding. It has a nominal melt flow of 20 g/10 min and typical properties including a tensile strength at yield of 5,600 psi, elongation at yield of 8%, and flexural modulus of 255,000 psi. This resin meets FDA requirements for food contact.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views1 page

    FT200WV

    Uploaded by

    data1plasticir
    FT200WV is a homopolymer polypropylene with good mold release and nucleation properties as well as antistatic additives. It has excellent rigidity and hardness, making it suitable for uses like housewares, caps, and closures as well as fast-cycle injection molding. It has a nominal melt flow of 20 g/10 min and typical properties including a tensile strength at yield of 5,600 psi, elongation at yield of 8%, and flexural modulus of 255,000 psi. This resin meets FDA requirements for food contact.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Polypropylene: FT200WV

    Sub-group
    Homopolymer

    Description
    Good mold release, nucleated, contains antistat, excellent rigidity and hardness

    Applications
    Suggested uses include housewares, caps and closures, fast-cycle injection molding

    Control Properties ASTM Method Units Values


    Nominal Melt Flow (230°C/2.16kg) D-1238 g/10 min 20

    Typical Properties ASTM Method Units Values


    Tensile Strength at Yield (2 in/min, 50 mm/min) D-638 psi(MPa) 5,600(39)
    Elongation at Yield (2 in/min, 50 mm/min) D-638 % 8
    Flexural Modulus (0.05 in/min, 1.3 mm/min, 1% secant) D-790A psi(MPa) 255,000(1,758)
    Notched Izod Impact Strength at 23°C D-256A ft-lbs/in(J/m) 0.7(37)

    Final Remarks
    1. This resin meets the requirements for olefin polymers as defined in 21 CFR, section 177.1520 issued by the Food and Drug Administration. The additives
    present meet the applicable regulations.
    2. This information reflects typical values obtained in our laboratories, but should not be considered as absolute or as warranted values. Only the properties and
    values mentioned on the Certificate of Quality are considered as guarantee of the product.

    3. In some applications, Braskem has developed tailor-made resins to reach specific requirements.

    4. In case of doubt regarding utilization, or for other applications, please contact Technical Service.

    5. The values in this report can be modified without prior communication from Braskem.

    6. Braskem polyolefin products do not have additives with heavy metals or organotin-based materials.

    Revision
    Date: 2/15/2019
    www.braskem.com

    You might also like