Section-I (Roads)

CHAPTER - 1
SUPPLY & CARRIAGE OF MATERIALS

Note :-

(i) The rates are inclusive of all taxes, royalty, sales tax etc. at source including cost of stacking at site of work with all leads
except that item where specifically mentioned.
(ii) Name and location of quarry is necessarily to be mentioned in relevant items for estimation purpose only.
(iii) The rates for collection of materials include:-
a) Making of approach to quarry as required
b) Removal of over burden and unsuitable material etc.
c) Dewatering of quarry, if necessary.
(iv) The contractor is required to keep at quarry site, one set of standard IS sieves and allied testing equipments for gradation of
aggregate as per Standard MoRTH Specifications.

(v) The actual volume of the aggregates to be paid shall be computed after deduction. The specified percentage in MoRTH
specification table 500-28 from the volume computed by stack measurement to be allowed for bulking (MoRTH specification
clause 514.5)

Item No. Description Unit Rate (Rs.)

1.1 Collection of well-burnt/slightly over burnt bricks of minimum

strength 100. Kg. Per sq.cm. of size, 23cmx11.5cmx7.5cm for 1000
soling. Nos 3242.00

1.2 Collection of well-burnt/slightly over burnt bricks of minimum

strength 50Kg Per sq.cm of size, 23cmx11.5cmx7.5cm for soling. 1000
Nos 2830.00

1.3 Collection of graded broken hard stone aggregates free from

Katcha stuff, deleterious and organic matter, as per IRC/MORTH
Specifications, including stacking as per the Standard
Specifications of sizes:
1.3.1 90mm to 45mm hand-broken. Cum 300.00

1.3.2 63mm to 45mm(-do-) Cum 450.00

1.3.3 53mm to 22.4mm Crusher broken Cum 550.00

1.3.4 63mm to 45mm Crusher broken Cum 500.00

1.3.5 13.2mm/11.2mm (-do-) Cum 650.00

1.3.6 6.7mm (-do-) Cum 500.00

1.3.7 Screening IRC Grade `A' Cum 400.00

1.3.8 Screening IRC Grade `B' Cum 400.00

1.4 Collection of crusher dust for bituminous works including stacking

as per the standard specifications Cum 400.00

1.5 Supply of straight run bitumen grade 80/100 Tonne 52000.00

R-1
Item No. Description Unit Rate (Rs.)

1.6 Supply of straight run bitumen grade 60/70 Tonne 54000.00

1.7 Supply of CRMB-60 Tonne 56000.00

1.8 Supply of Bitumen emulsion Tonne 42385.00

1.9 Supply of Masonary stone Cum 570.00

1.10 Collection of Binding material/mooram for WBM course (P.I. less

than 6 as per MoRTH Specification clause No.404-2.7), including
stacking the standard as per Specifications. Cum 150.00

1.11 Collection of sand (Bikaner Bajri) including stacking as per the

standard specifications Cum 371.00

1.12 Supply of Steel bars

1.12.1 Mild steel bars Kg. 72.00

1.12.2 Fe 415 grade Kg. 72.00

1.12.3 TMT bars Kg. 72.00

1.13 Supply of binding wire Kg. 72.00

1.14 Supply of barbed wire Kg. 72.00

1.15 Supply of angle, tee, flat, channel, girder etc. Kg. 50.00

1.16 Supply of cement Bag 375.00

1.17 Collection of graded gravel/unscreened kankar for granular sub-

base ( P.I. less than 6) , grading as per MoRTH specifications
table 400-1, 400-2, with CBR value not less than 30 at quarry site
Cum 130.00
Basic Rate of Labour
1.17.1 Mate Per day 510.00
1.17.2 Dresser Per day 250.00
1.17.3 Beldar Per day 435.00
1.17.4 Skilled Mazdoor ( Hot Mazdoor) Per day 510.00
1.17.5 Mason Per day 625.00
1.17.6 Blacksmith & Bar bender Per day 620.00
1.17.7 Driver Per day 630.00
1.17.8 Welder grade-I Per day 630.00
1.17.9 Plumber Per day 500.00
1.17.10 Painter grade-I Per day 570.00
1.17.11 Driller Per day 510.00
1.17.12 Carpenter grade-I Per day 625.00
1.17.13 Well sinker Per day 510.00
1.17.14 Blaster Per day 450.00
1.17.15 Chiesler Per day 400.00

R-2
Item No. Description Unit Rate (Rs.)
1.18 Loading and Unloading of Lime, Aggregate, Stone Boulder, Brick
Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for
Masonry Work by Manual Means

(i) Loading of Lime, Aggregate, Stone Boulder, Brick Aggregate,

Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work
by manual means including a lead upto 30 m cum 31.35

(ii) Loading of Earth, Sand, Moorum, Manure, Flyash by manual

means including a lead upto 30 m cum 17.00

(iii) Unloading of Lime, Aggregate, Stone Boulder, Brick Aggregate,

Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work
by manual means including a lead upto 30 m cum 17.00

(iv) Unloading of Earth, Sand, Moorum, Manure, Flyash by manual

means including a lead upto 30 m cum 9.90

1.19 Loading and Unloading Lime, Aggregate, Stone Boulder, Brick

Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for
Masonry Work by Mechanical Means

(i) Loading of Lime, Aggregate, Stone Boulder, Brick Aggregate,

Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work
by mechanical means including a lead upto 30 m cum 25.90

(ii) Loading of Earth, Sand, Moorum, Manure, Flyash by mechanical

means including a lead upto 30 m. cum 11.55

(iii) Unloading of Earth, Sand, Lime, Moorum, Aggregate, Stone

Boulder, Brick Aggregate, Kankar, Building Rubbish, Manure,
Crushed Slag, Flyash, Stone for Masonry Work by mechanical
means. cum 2.80

1.20 Loading, Unloading and Stacking of Bricks by Manual Means

(i) Loading of Bricks by manual means including a lead upto 30 m

1000 Nos. 53.00

(ii) Unloading and Stacking of Bricks by manual means including a

lead upto 30 m 1000 Nos. 53.00

1.21 Loading and Unloading of Cement by Manual Means

(i) Loading of Cement by manual means including a lead upto 30 m t 45.00

(ii) Unloading of Cement by manual means including a lead upto 30 m t 45.00

1.22 Loading and Unloading of Structural Steel and Steel Bars by

manual means

(i) Loading of Structural Steel, Steel Bars by manual means including

a lead upto 30 m t 48.00

R-3
Item No. Description Unit Rate (Rs.)
(ii) Unloading of Structural Steel, Steel Bars by manual means
including a lead upto 30 m t 48.00

1.23 Loading and Unloading of Bitumen Drums by Manual Means

(i) Loading of Bitumen Drums by manual means including a lead upto

30 m t 52.40

(ii) Unloading of Bitumen Drums by Manual Means including a lead

upto 30 m t 44.80

1.24 Loading and Unloading of Timber by Manual Means

(i) Loading of Timber by manual means including a lead upto 30 m

t 73.00

(ii) Unloading of Timber by manual means including a lead upto 30 m

t 73.00

1.25 Loading and Unloading of C.C. Blocks, Kerb, etc.

(i) Loading with care C.C. Blocks, km Stone, 200 m Stone, Boundary
Pillar, Kerb, Channel, Bond Stone, etc. by manual means
including a lead upto 30 m cum 115.00

(ii) Unloading with care C.C. Blocks, km Stone, 200 m Stone,

Boundary Pillar, Kerb, Channel, Bond Stone, etc. by manual
means including a lead upto 30 m cum 115.00

1.26 Loading and Unloading of Hume Pipes

(i) Loading of RCC Hume pipes by mechanical means including a

lead upto 30 m
A. 1000 / 1200 mm dia Hume pipe per pipe 31.00

B. 750 mm dia Hume pipe per pipe 18.00

C. 600/450 mm dia Hume pipe per pipe 13.00

(ii) Unloading of RCC Hume pipe by manual means including a lead

upto 30 m

A. 1000/1200 mm dia RCC Hume pipes per pipe 128.00

B. 750 mm dia Hume pipe per pipe 105.00
C. 600/450 mm dia Hume pipe per pipe 79.00

(iii) Unloading of RCC Hume pipes by mechanical means including a

lead upto 30 m

A. 1000/1200 mm dia Hume pipe per pipe 23.00

B. 750 mm dia Hume pipe per pipe 14.00
C. 600/450 mm dia Hume pipe per pipe 9.90

R-4
Item No. Description Unit Rate (Rs.)

1.27 Haulage excluding Loading & Unloading

Haulage of materials by tipper excluding cost of loading, unloading

and stacking.

Case-I : Surfaced Road t.km 2.50

Case-II: Unsurfaced Gravel Road t.km 3.30

Case-III: Katcha Track and Track in River Bed/Nallah Bed and

Choe Bed t.km 6.60

1.28 Supply of Quarried stone and hand breaking

(i) Supply of quarried stone and hand breaking into coarse aggregate
to Grading 1 (90 mm to 45 mm) as per Table 400.8 of Technical
Specifications. cum 355.00

(ii) Supply of quarried stone and hand breaking into coarse aggregate
to Grading 2 (63 mm to 45 mm) as per Table 400.8 of Technical
Specifications. cum 394.00

(iii) Supply of quarried stone and hand breaking into coarse aggregate
to Grading 3 (53 mm to 22.4 mm) as per Table 400.8 of Technical
Specifications. cum 435.00

1.29 Crushing of Stone Aggregates 100 per cent passing through 53

mm sieve as per Table 500.6 of Technical Specifications.
Crushing of stone boulders of 150 mm size in an integRate (Rs.)d
stone crushing unit of 200 t/h capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to
obtain stone aggregates 100 per cent passing through 53 mm
sieve cum 319.00

1.30 Crushing of Stone Aggregates 100 per cent passing through 22.4
mm sieve as per Table 500.6 of Technical Specifications.
Crushing of stone boulders of 150 mm size in an integRate (Rs.)d
stone crushing unit of 200 t/h capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to
obtain stone aggregates 100 per cent passing through 22.4 mm
siev cum 324.00
1.31 Crushing of Stone Aggregates Nominal Size 13.2 mm as per
Table 500.9 of Technical Specifications.
Crushing of stone boulders of 150 mm size in an integRate (Rs.)d
stone crushing unit of 200 t/h capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to
obtain stone aggregates of 13.2 mm nominal size as per Table
500. cum 404.00

R-5
Item No. Description Unit Rate (Rs.)
1.32 Crushing of Stone Aggregates 9.5 mm Nominal Size as per Table
500.9 of Technical Specifications.
Crushing of stone boulders of 150 mm size in an integRate (Rs.)d
stone crushing unit of 200 t/h capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to
obtain stone aggregates of 9.5 mm nominal size as per Table
500.9 cum 426.00

1.33 Setting Out

Construction of reference bench mark (1 No.), working bench
mark (4 No.) and near all drainage structures and bridges (as per
direction of Engineer-in-charge), reference pillar/ burjees @ 50 m
interval on both side of formaton width including marking of centre
line, setting out curves, recording of levels, white washing and
lettering etc. complete as per MORD specifications cl. 108.
P. Km. 31,625.00

(ii) Working bench mark as per drawing No 200.1 of Technical

specifications including the cost of material required for
cosntruction
(a) Height upto 1.00 m from GL Each 1,400.00

(b) Height upto 2.00 m from GL Each 2,200.00

(c) Height upto 3.00 m from GL Each 3,110.00

(iii) Reference pillars/ Burjees as per drawign No 200.2 of Technical

specifications including the cost of material required for
construction
(a) Height upto 1.00 m from GL Each 643.00

(b) Height upto 2.00 m from GL Each 928.00

(c) Height upto 3.00 m from GL Each 1,316.00

R-6
 Section-I (Roads)
CHAPTER - 2
SITE CLEARANCE & DISMANTLING

Note :-

1 Unless otherwise stated, the rates include sorting and disposal of unserviceable material and stacking of serviceable material
with a lead of 100 meters. Extra leads if required can be paid as per Chaptrer R-1

2 The rates of items of dismantling given in this chapter are for work done in foundation upto a depth of 1.50 metre below ground
level and also upto a height of 1.50 metre above ground level. For additional height/depth,the extra rate payable shall be as
under:

(a) Rs. 5.00 per cum in the rate of item No. R-2/7.1.1 to R-2/ 7.3.5 for work in foundation beyond 1.50 metre below
ground level for every additional depth of 1.50 metre or part thereof.

(b) Rs. 10.00 per cum in the rate of item nos. R-2/7.1.1 to R-2/7.3.5 for work in superstructure upto a height of 4.0
metre or part thereof from/above 1.50 metre from Ground/Bed Level.

(c) Rs. 7.00 per cum in the rate of item no. R-2/7.1.1 to R-2/7.3.5 for every additional height of 4.00 metre or part
thereof in superstructure in case height exceeds 4.00 metre.

(d) All concrete pavements, base courses in carriageway and shoulders designated for removal, shall be broken to
pieces whose volume does not exceed 0.02 cum.
Unless otherwise specified the rates of this chapter include tools and plants and scaffolding required for items of
dismantling.

3 Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation
by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire
charges of machinery, including T&P upto 20 Km lead of material from quarry (compacted thickness to be measured).

4 All wood obtained from the tree shall be the property of the Government and shall be deposited at PWD store (at site) as per
the direction of the Engineer-In-Charge.

Item No. Description Unit Rate (Rs.)

2.1 Site clearance including uprooting of rank vegetation, bushes, 100

woods, trees and sapplings of girth upto 150mm and removal of Sqm
rubbish etc. complete 99.00

2.2 Dreesing ground including levelling upto 150 mm depth and 100
disposal of excavated earth upto 50M lead and upto 1.5 Mts Sqm 396.00

2.3 Cutting and burning of cacti and thorny bushes. 100

Sqm 99.00

2.4 Cutting of trees including cutting of trunks, branches and removal

of stumps including stacking of serviceable material within a lead
of 1000 meters with all lift and earth filling to required compaction
in the depression/pit as per MoRTH Specification : Clause 201

2.4.1 Girth above 150mm & upto 300 mm Each 66.00

2.4.2 Girth above 300mm & upto 600 mm Each 104.50

R-7
Item No. Description Unit Rate (Rs.)
2.4.3 Girth above 600mm & upto 900 mm Each 187.00

2.4.4 Girth above 900mm & upto 1800 mm Each 357.50

2.4.5 Girth above 1800mm & upto 2700 mm Each 660.00

2.4.6 Girth above 2700mm Each 1430.00

2.5 Clearing grass and removal of rubbish (maximum 150 mm) upto a Hect.
distance of 100 mtrs. outside the periphery of the area cleared-by
manual means.
6490.00
Note : (Where only grass is met with, the area cleared shall be
measured and paid for under this item) (MoRTH Specification :
201)

2.6 Clearing and grubbing road land including uprooting rank

vegetation, grass, bush, shrubs, saplings and trees of girth upto
300mm, removal of stumps, disposal of unserviceable material
and stacking of serviceable material upto 1000 m from road
boundry as per MoRTH Specification : 201

2.6.1 By Manual Means

2.6.1.1 In area of light jungle Hect. 24750.00

2.6.1.2 In area of thorny jungle Hect. 32450.00

2.6.2 By Mechanical Means

2.6.2.1 In area of light jungle Hect. 10450.00

2.6.2.2 In area of thorny jungle Hect. 14080.00

2.7 Dismantling upto 1.5m in foundation and/or 1.5m above ground

level including T&P and scaffolding wherever necessary, sorting
the dismantled material, disposal of unserviceable material, and
stacking serviceable material within a lead of 1000m. [MoRTH
Specification clause 202]
2.7.1 Concrete

2.7.1.1 Lime concrete, cement concrete or lean mix concrete. Cum 198.00

2.7.1.2 Cement Concrete 1:4:8 or 1:5:10 mix. Cum 324.50

2.7.1.3 Cement Concrete plain 1:3:6 mix. Cum 506.00

2.7.1.4 Cement concerte plain 1:2:4 mix and precast cement concerte
858.00
blocks. Cum

2.7.1.5 Reinforced cement concrete with cleaning, straightening and

cutting of bars and seprating out from R.C.C. Cum 594.00

R-8
Item No. Description Unit Rate (Rs.)

2.7.2 Dismantling Brick/Tile work

2.7.2.1 In Lime mortar Cum 280.50

2.7.2.2 In cement mortar Cum 528.00

2.7.2.3 In mud mortar Cum 170.50

2.7.2.4 Dry Brick pitching or brick soling Cum 170.50

2.7.3 Dismantling stone masonry

7.3.1 Rubble stone masonry in lime Cum 132.00

7.3.2 Rubble stone masonry in cement mortar Cum 162.80

7.3.3 Rubble Stone masonry in mud Cum 121.00

7.3.4 Dry rubble masonry Cum 126.50

7.3.5 Stone pitching /dry stone spalls. Cum 104.50

In wires crates, including opening of crates and stacking crates
7.3.6
material. Cum 198.00

2.7.4 Wood work, wrought framed and fixed in frames of trusess upto a
hegiht of 5 metres above plinth level. Cum 352.00

2.7.5 Steel Work

2.7.5.1 Steel work in single section upto a height of 5 metres above plinth
level (Riveted work where rivets are required to be cut shall be
measured and paid for separately).

2.7.5.1.1 R.S. Joists. Tonne 825.00

2.7.5.1.2 Channels, angles,tees and flats Tonne 495.00

2.7.5.2 Steel work in built up section in angles, tees, plates and channels
including all gusset plates, bolts, nuts, beading etc.

2.7.5.2.1 Including dismembering Tonne 715.00

2.7.5.2.2 Excluding dismembering Tonne 467.50

2.7.5.2.3 Extra over item No. 2.7.5.1.1,2.7.5.1.2,2.7.5.2.1 & 2.7.5.2.2 for

cutting rivets. Each 22.00

2.7.6 Scraping of Bricks/ Stones from dismantled masonry

2.7.6.1 Bricks from brick masonry

2.7.6.1.1 In lime or cement mortar 1000Nos. 467.50

R-9
Item No. Description Unit Rate (Rs.)
2.7.6.1.2 In mud mortar 1000Nos. 187.00

2.7.6.2 Stone from Stone masonry

2.7.6.2.1 In lime or cement mortar Cum 198.00

2.7.6.2.2 In mud mortar Cum 52.80

2.7.6.3 Plaster in lime or cement mortar Sqm 14.00

2.7.7 Removing hume pipes class NP3 / NP4

2.7.7.1 300 mm to 600 mm dia Metre 82.50

2.7.7.2 Above 600 mm to 900 mm dia Metre 107.80

2.7.7.3 Above 900 mm dia Metre 187.00

2.8 Scarifying, including picking up scarified material and stacking of

old serviceable material with in a lead of 100 metres [MoRTH
specification: Clause 501].

2.8.1 Top bituminous surface of surface dressing or premix carpet with

all lift and lead upto 1000m for reusable materials. Sqm 15.00

2.8.2 Stone metal crust 50mm to 100mm thick with pickaxes along with
premix carpet/surface dressing with all lift and lead upto 1000m for
reusable materials. Sqm 28.60

2.8.3 Stone metal crust- 50mm to100mm thick by road roller with
scarifier along with 20mm premix carpet/surface dressing with all
lift and lead upto 1000m for reusable materials. Sqm 24.00

2.8.4 Kankar/Gravel metal crust upto 150mm thick with pickaxes with all
lift and lead upto 1000m for reusable materials. Sqm 16.50

2.8.5 Kankar/Gravel metal crust upto 150mm thick with Power Roller
with scarifier with all lift and lead upto 1000m for reusable
materials. Sqm 16.50

2.8.6 Bituminous course 50-75mm thick along with premix carpet and
surface dressing but without disturbing the base with all lift and
lead upto 1000m for reusable materials.

2.8.6.1 By manual means Sqm 33.00

2.8.6.2 With road roller attached with scarifier Sqm 17.60

2.9 Dismantling of flexible pavements and disposal of dismantled

materials upto a lead of 1000 metres, scaking serviceable and
unserviceable materials separately as per MoRTH specification
claue : 202

2.9.1 By Manual Means

2.9.1.1 Bituminiious Course Cum 357.50

2.9.1.2 Granular Courses Cum 264.00

R-10
Item No. Description Unit Rate (Rs.)

2.9.2 By Mechanical Means

2.9.2.1 Bituminous courses Cum 159.50

2.9.2.2 Granular Courses Cum 148.50

2.10 Cutting of branches of trees, shrubs & trimming of grass and

weeds

2.10.1 Cutting of branches of trees : Nos. 59.40

2.10.2 Cutting of shrubs : Nos. 5.50

2.10.3 Trimming of grass & weeds : Nos. 1.98

2.11 Dismantling of Fencing

Dismantling of barbed wire fencing / wire mesh fencing including
posts, foundation concrete, backfilling of pit by manual means
including disposal of dismantled material with all lifts and upto a
lead of 1000 m, stacking serviceable material and unserviceable
material sepaRate (Rs.)ly as per Technical Specification Clause
202. running m 22.00

2.12 Dismantling of CI Water Pipe Line

Dismantling of CI water pipe line 600 mm dia including disposal
with all lifts and lead upto 1000 m and stacking of serviceable
material and unserviceable material sepaRate (Rs.)ly under
supervision of concerned department as per Technical
Specification Clause 202. running m 68.20

2.13 Removal of Cement Concrete Pipe of Sewer Gutter

Removal of cement concrete pipe of sewer gutter 1500 mm dia
under the supervision of concerned department including disposal
with all lifts and upto a lead of 1000 m and stacking of serviceable
and unserviceable material sepaRate (Rs.)ly but excluding earth
excavation and dismantling of masonry works as per Technical
Specification Clause 202. running m 83.60

2.14 Removal of Telephone/Electric Poles and Lines

Removal of telephone/electric poles with wires including
excavation and dismantling of foundation concrete and lines under
the supervision of concerned department, disposal with all lifts and
upto a lead of 1000 m and stacking the serviceable and
unserviceable material sepaRate (Rs.)ly as per Technical
Specification Clause 202. each 79.20

R-11
 Section-I (Roads)
CHAPTER - 3
EARTH WORK

Note :-

1 Converting lift in to horizontal lead for obtaining the combnined lead.

(a) List shall be measured from the centre of gravity of the excavatged earth to that of the placed earth. This shall
constitute the mean lift for the section.

(b) For converting lift to lead, lift upto 4.0 metre shall be multiplied by 10 and above 4.0 metre upto 6.0 metre, it will
be squared and multiplied by 3.25 beyond 6.0 metre it will be multiplied by 20.
(c) No cross lead whatsoever shall be measured for payment.
(d) Leads beyond those included/detailed herein, could be calculated as per chapter R-1

2 Unless otherwise stated in the item, the rates of this chapter do not include pumping/bailing out water of pond caused by
springs, subsoil water, canal, river seepage and broken water mains or drains. However, pumping/bailing out rain water
collected in foundation/borrow pit/depression shall not be paid for extra.

3 The classification of excavation shall be decided by the Engineer and his decision shall be final and binding. The intermediate
classification, if any, like Pick and Jumper (P.J.)/jumper and Blasting (J.B./Pick, jumper and Blasitng (P.J.B.) etc. shall be paid
proportionately.

4 Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 25.

5 The rates for recently deposited earthwork after excavation, will be 70% rates for earthwork in excavation. Earthwork,
deposited before monsoon which has had full monsoon on it will be considered as a normal earthowrk in excavation.

Item No. Description Unit Rate (Rs.)

3.1 Removal of blown sand including taking out and disposal of

excavated material with lead upto 50 m and lift upto 1.5m
disposed soil to be levelled and neatly dressed. Cum 29.70

3.2 Removal of unservicable soil, blown sand including excavation,

loading and disposal upto 1000 m lead. Cum 46.20

3.3 Earth work in excavation including stacking/ disposal of surplus

earth with all lifts and lead upto 1000 meters exclusive of
compensation of earth (MoRTH specification Clause 301 to 305).

3.3.1 In ordInary soil

3.3.1.1 manually including breaking of clods Cum 66.00
3.3.1.2 mechanically by power shovel including mechanical loading and
carriage upto 1 km by tipper/dumper Cum 35.20

3.3.2 In hard soil

3.3.2.1 manually using pickaxe etc. Cum 118.80
3.3.2.2 mechanically using bull dozer, F.E. loader and carriage upto 1 km
by tipper/dumper. Cum 39.60

3.3.3 In hard soil mixed with kankar, boulders etc. upto 20%

R-12
Item No. Description Unit Rate (Rs.)
3.3.3.1 manually using pickaxe, shovel etc. Cum 143.00
3.3.3.2 mechanically using bulldozer, F.E. loader and carriage upto 1 km
by tipper/dumper. Cum 44.00

3.3.4 In hard soil mixed with kankar,boulders etc. above 20%

3.3.4.1 manually using pickaxe, shovel etc. Cum 55.00
3.3.4.2 mechanically using bulldozer, F.E. loader and carriage upto 1 km
by tipper/dumper. Cum 49.50

3.3.5 By blasting including blasting material

3.3.5.1 in soft rock Cum 172.70
3.3.5.2 in hard rock Cum 180.40

3.3.6 By chieseling/wedging out rock where blasting is prohibited

3.3.6.1 in soft rock Cum 693.00

3.3.6.2 in hard rock Cum 979.00

3.3.7 In soil unsuitable for road construction such as marshy soil

including pumping out water, removal of the same and disposal
within a lead upto 50 mtr lift upto 0.50 mtr. Cum 42.90

3.4 Box cutting/Trenching the Sub Grade to proper slope,camber and

removing inequalities including removing deleterious stuff and
depositing on the road side slopes (cutting of earth shall be paid
separately in the respective item on the basis of classification of
the excavation done by the Engineer MoRTH Specification Clause 100
301 to 305) Sqm 61.60

3.5 Compaction of original ground with maximum of six passes of 8-10

tonnes power roller including filling depression occurring during 100
rolling [MoRTH Specification : Clause 305.3.4] Sqm 308.00

3.6 Compensation for earth, taken from private land with all lead and
lift (Land to be arranged by private negotiations by the contractor)
[MoRTH Specification : Clause 301to 305]. Cum 6.60

3.7 Extra for additional lead over specified lead refer Chapter-1
carriage of material.

3.8 Add extra over Item No. 3.1 to 3.4 for earth work in embankement
construction, side slopes etc. including compaction in 200 mm
thick loose layers and dressing (MoRTH specification clause :
305.3.5) by manual means with all lead and lift but excluding
watering and rolling. Cum 6.60

3.9 Earth work in embankement construction, side slopes etc. from

already excavated earth in stockpiles including breaking of clods
and dressing with all lead and lift but excluding watering and
rolling.
3.9.1 by manual means Cum 35.20
3.9.2 by mechanical means using motor grader etc. Cum 18.70

3.10 Extra for watering the earth to bring the earth upto required O.M.C
excluding rolling Cum 9.90

R-13
Item No. Description Unit Rate (Rs.)

3.11 Extra for rolling to specification with the use of vibratory roller
when earth is at suitable moisture content with desired density
excluding watering.

3.11.1 Field density not less than 95% of maximum dry density (Modified
Heavy Proctor test) Cum 8.00

3.11.2 Field density not less than 100% of maximum dry density
(Modified Heavy Proctor test) Cum 10.00

3.12 Extra for rolling to specification with power roller 8-10 tonne when
earth is at suitable moisture content with desired density excluding
watering.

3.12.1 Field density not less than 95% of maximum dry density (Ordinary
Proctor test) Cum 5.00

3.12.2 Field density not less than 100% of maximum dry density
(Ordinary Proctor test) Cum 7.00

3.13 Earthwork in excavation in foundation trenches etc. not exceeding

2 metres depth including dressing of bottom and sides of trenches,
stacking the excavated soil 3m. Clear from the edge of excavation
and subsequent filling around hume pipes/masonry in 15cm layers
with compaction including disposal of all surplus soil as directed
within a lead of 1000 metres.[MoRTH Specification : Clause
301,304].
3.13.1 Ordinary Soil Cum 115.00
3.13.2 Hard soil with pick work Cum 140.00
3.13.3 Hard soil mixed with kankar, boulder etc.upto 20% Cum 145.00
3.13.4 Hard soil mixed with kankarboulder etc.above 20% Cum 150.00

3.13.5 By blasting

3.13.5.1 in soft rock Cum 343.20

3.13.5.2 in hard rock Cum 363.00

3.13.6 By chiseling/wedging out rock where blasting is prohibited.

3.13.6.1 in soft rock Cum 836.00

3.13.6.2 in hard rock Cum 1894.20

R-14
Item No. Description Unit Rate (Rs.)
3.14 Earth work in excavation in foundation trenches etc.in drains and
channels etc. not exceeding 2m.depth, including dress-sing of
bottom and sides of trenches, stacking the excavated soil 3m clear
from the edge of excavation including disposal of surplus soil as
directed within a lead of 1000 metres [MoRTH Specification :
Clause 301,304]

3.14.1 Ordinary Soil Cum 65.00

3.14.2 Hard soil with pick work Cum 90.00

3.14.3 Hard soil mixed with kankar, boulder etc. upto 20% Cum 95.00

3.14.4 Hard soil mixed with kankarboulder etc.above 20% Cum 100.00

3.14.5 By blasting
3.14.5.1 in soft rock Cum 200.00
3.14.5.2 in hard rock Cum 220.00

3.14.6 By chiseling/wedging out rock where blasting is prohibited.

3.14.6.1 in soft rock Cum 520.00

3.14.6.2 in hard rock Cum 850.00

3.15 Earth filling with surplus soil excavated from foundation and taken
only from outside of building plinth in 15cm compacted layers,
including ramming watering and consolidation, lead upto 30
metres [MoRTH Specification : Clause 301,304].
3.15.1 Ordinary Soil Cum 61.60
3.15.2 Hard soil Cum 92.40

3.16 Dagbelling (for departmental work)

3.16.1 100 x 100 mm 100 RM 66.00

3.16.2 200 x 100 mm 100 RM 77.00

3.17 Supplying, filling and stitching of empty cement bags either of

plastic or jute with earth available at site of work, weight not less
than 40 kg including excavation of earth, fixing of bags in position
at rain damaged site, sideslopes etc. complete.
Each 18.70

3.18 Providing & laying kheep lining 10 cm wide and 30 cm high

including digging, cutting and carriage of kheep from nearby fields
and to dig the dagbelling 20 cm deep and to make the kheep lining
including fixing kheep with earth etc. complete. Metre 4.40

R-15
Item No. Description Unit Rate (Rs.)
3.19 Mulching on sides of heavy cutting and heavy filling with senia &
fog in parallelogram shape etc. including cutting and transportation
of senia and fog from near by fields and digging the trenches 20
cm deep and fixing senia and fog on interior angle - 45 degree and
sides of each parallelogram 1.00 mtr. as per specification.
Sqm 16.50

3.20 Construction of Embankment with Material Obtained from Borrow

Pits

Construction of embankment with approved material obtained

from borrow pits with a lift upto 1.5 m, transporting to site,
spreading, grading to required slope and compacting to meet
requirement of Tables 300.1 and 300.2 as per Technical
Specification Clause 301.5
_____do___________ with lead upto - 50mtr Cum 52.80

_____do___________ with lead 50 mtr to - 500mtr Cum 93.50

_____do___________ with lead 500mtr to 1000 mtr Cum 121.00

3.21 Preparation of Foundation for Embankment

Scarifying Existing Granular Surface to a Depth of 50 mm by
Manual Means

Scarifying existing granular surface to a depth of 50 mm and

disposal of scarified material with a lift upto 3 m and leads upto
1000 m as per Technical Specification Clause 301.4. Cum 8.800

3.22 Preparation of Foundation for Embankment

Scarifying Existing Bituminous Surface to a Depth of 150 mm by
Mechanical Means
Scarifying the existing bituminous road surface to a depth of 150
mm and disposal of scarified material with a lift upto 3 m and lead
upto 1000 m as per Technical Specification Clause 301.4. Cum 6.050

R-16
 Section-I (Roads)
CHAPTER - 4
GRANULAR SUB-BASE

Item No. Description Unit Rate (Rs.)

4.1 Providing, laying, spreading and compacting inverted choke of

specified graded aggregate in subbase course in uniform layer on
a prepared base with motor grader and compacting with power
roller etc.(by mechanical means).[MoRTH Specification : Clause
404.3.2. Cum 610.00

4.2 Providing and laying granular sub-base material having P.I.not

more than 6, including compacted thickness and consolidation by
8-10 tonne power roller at OMC to achieve desired density to
required camber and grade including cost of water and hire
charges of machinery, including T&P and all lead of material from
quarry (compacted thickness to be measured).

4.2.1 Grading as per MoRTH specification : Table 400-1, 400-2 with

CBR value not less than 30.

i)To achieve 100% Proctor density Cum 330.00

ii)To achieve 95% Proctor density Cum 313.50

4.2.2 Grading as per MoRTH specification : Table 400-1, 400-2 with

CBR value not less than 25.

i)To achieve 100% Proctor density Cum 316.80

ii)To achieve 95% Proctor density Cum 302.50

4.2.3 Grading as per MoRTH specification : Table 400-1, 400-2 with

CBR value not less than 20

i)To achieve 100% Proctor density Cum 286.00

ii)To achieve 95% Proctor density Cum 280.50

4.2.4 Grading as per MoRTH specification : Table 400-1, 400-2 with

CBR value not less than 15

i)To achieve 100% Proctor density Cum 286.00

ii)To achieve 95% Proctor density Cum 269.50

R-17
Item No. Description Unit Rate (Rs.)
4.3 Providing, laying, spreading and compacting specified graded
sand, gravel as per Table 400-1,400-2 or any other coarse
material as per design mix, as per CBR in sub base course
including premixing the material at OMC in mechanical mixer(Pug
mill), carriage of mixed material spreading in uniform layers with
motor grader, F.E loader on a prepared base and compacting with
vibratory roller to achieve desired density (as per I.S.2720)
including all material, labour, machinery, lighting, guarding,
barricading and maintenance of diversion complete.[MoRTH
specification : Clause 401] by mechanical means with all lead.
Cum 624.00

4.4 Providing, laying, spreading and compacting specified graded

crushed stone in sub-base course including premixing the material
at OMC in mechanical mixer (Pug mill), carriage of mixed material,
laying in uniform layers with motor grader, F.E.loader on a
prepared surface and compacting with vibratory compactor to
achieve the desired density including all material, labour,
machinery, lighting barricading and maintenance of diversion
complete.[MoRTH specification Clause 401] with all lead
Cum 979.00

4.5 Laying brick soling with over-burnt bricks in herring-bone bond or

in header or stretcher bond to proper gradient and camber
including spreading of sand or earth etc. with bricks of all size.

a)Flat Sqm 14.30

b)On edge Sqm 17.60

4.6 Spreading of granular material as per MoRTH specification table

400-1,400-2 to required grade and camber in layers not exceeding
15 cm thickness (loose) as per specification including dressing
etc. complete. cum 26.40

4.7 Spreading and Consolidation/Compaction of granular material to

required grade and camber by power road roller 80-100 KN weight
including watering with all lead of water, hire charges of machinery
and T&P as per MoRTH specifications.

a) to attain 100% Proctor density Cum 38.50

b) to attain 95% Proctor density Cum 35.20

4.8 Construction of footpath/separator by providing a 150 mm

compacted granular sub- base as per Clause 401 and 25 mm
thick cement concrete grade M-15, overlaid with precast concrete
tiles 300x300x25 mm in cement mortar 1:3 including provision of
all drainage arragement but excluding kerb channel.
Sqm 350.90

R-18
 Section-I (Roads)
CHAPTER - 5
BASE COURSE

Item No. Description Unit Rate (Rs.)

5.1 Providing, laying, spreading and compacting stone aggregate of

specific size as per table 400-6 & 400-7 to Water Bound
Macadam specification including spreading in uniform thickness,
hand packing, rolling with power roller 8-10 tonnes, in stages to
proper grade and camber, applying and brooming requisite type of
Stone screening to fill-up the interstices of coarse aggregates,
watering (with water browser) and rolling, making necessary
earthen bund to protect edegs, lighting, guarding, barricading
and maintenance of diversion etc. [MoRTH specification : Clause
404] (by manual means) with all leads (compacted thickness as
specified to be measured)

5.1.1 Grading no.1 (90-45mm) hand broken Cum 686.40

5.1.2 Grading no.2 (63-45mm) hand broken Cum 748.00

5.1.3 Grading no.2 (63-45mm) crusher broken Cum 979.00

5.1.4 Grading no.3 (53-22.4 mm) crusher broken Cum 1045.00

5.2 Providing, laying, spreading and compacting stone aggregate of

specific size as per table 400-6 & 400-7 to Water Bound
Macadam specification including spreading in uniform thickness,
hand packing, rolling with power roller 8-10 tonnes, in stages to
proper grade and camber, applying and brooming requisite type of
Crushable screening to fill-up the interstices of coarse
aggregates, watering (with water browser) and rolling, making
necessary earthen bund to protect edegs, lighting, guarding,
barricading and maintenance of diversion etc. [MoRTH
specification : Clause 404] (by manual means) with all leads
(compacted thickness as specified to be measured)

5.2.1 Grading no.1 (90-45mm) hand broken Cum 602.80

5.2.2 Grading no.2 (63-45mm) hand broken Cum 752.40

5.2.3 Grading no.2 (63-45mm) crusher broken Cum 891.00

5.2.4 Grading no.3 (53-22.4 mm) crusher broken Cum 971.30

R-19
Item No. Description Unit Rate (Rs.)
5.3 Providing, laying, spreading and compacting crushed graded
stone aggregate of as per table 400-10 and 400-11 to Wet Mix
Macadam specification including premixing the material with
water to OMC in mechnical mixer as per approved design mix,
carriage of mixed material by Tipper to site, laying in uniform
layers with motor grader/F.E. Loader/paver finisher in sub base /
base course on a well prepared under base and compacting with
vibratory roller to achieve the desired density including lighting,
guarding, barricading and maintance of diversion etc. (MoRTH
specification : Clause 406) by mechanical means with all lead
cum 1144.00

5.4 Laying WBM course to required camber and grade, spreading of

material, consolidation with 8-10 tonne road-roller including
spreading and consolidation of screening or binding material
including cost of water with all leads, cost of fuel and lubricants
and hire charges of machinery and T&P, complete work
compacted thickness not exceeding 100 mm using graded stone
ballast size (grading I, II and III of table 400-7 of MoRTH
Specification clause 404) in layers. cum 312.40

R-20
 Section-I (Roads)
CHAPTER - 6
BITUMINOUS CONSTRUCTION

Note :-

1 If there is basic difference of rates in BSR and market for bitumen, the difference amount should be added in the estimate and
should be considered only for the estimate purpose only for the estimate purpose.
2 All the rates of item for labour charges are inclusive of both cost of fuel and hire charges of machines and other T & P required
for the complete execution of item at site but exclusive of cost of stone aggregate and binder or other admixtures i.e. kerosene
etc.

Item No. Description Unit Rate (Rs.)

PRIMER COAT AND TACK COAT

6.1 Cleaning the existing WBM/WMM surface including removing of

binding material and other foreign matter with wire brushes,
small picks, sweeping with brooms and soft brushes, finally
dusting with old gunny bags and compressed air to receive
bituminous treatment [MoRTH Specification : Clause 501 to
503,112] Sqm 7.70

6.2 Cleaning of the existing black topped surfaces with brooms/soft

brushes finally dusting with old gunny bags and compressed air to
receive bitumious treatment [MoRTH Specification 501 to 503,112]
Sqm 3.30

6.3 Scarifying existing stone metal layer up to 75mm thick along

with bituminous surface picking up scarified material within a lead
of 100m sequential spreading the salvage aggregate with fresh
aggregate on perpared base and consolidation as per WBM
specification. (Compacted thickness to be measured) [MoRTH
Specification : Clause 404,112]
Cum 803.00

6.4 Providing and applying primer coat over prepared surface or

granular base with bitumen emulsion as per IS: 8887 &
manufacturer’s specifications @ 6 kg /10 sqm with a self propelled
or towed bitumen pressure sprayer equipped for spraying the
material uniformly at specified rates and temperatures including
cleaning of road surface as per MoRTH specification CIause-
502,112 Sqm 26.40

6.4.1 Add extra to above item per .10 Kg Extra in Emulsion per 10 Sqm
Sqm 3.85

6.4.2 8.5 kg /10 Sqm 31.90

R-21
Item No. Description Unit Rate (Rs.)
6.5 Providing and applying tack coat with bitumen emulsion on the
prepared surface including cleaning as per IS : 8887 &
manufacturer’s specifications @ 2 kg /10sqm with a self propelled
or towed bitumen pressure sprayer equipped for spraying the
material uniformly at specified rates and temperatures as per
MoRTH specification CI.503,112 Sqm 8.36

6.5.1 -------do ------------- @ 2 .25 kg /10sqm ------------------ do -------------- Sqm 9.35

6.5.2 -------do ------------- @ 2 .75 kg /10sqm ------------------ do -------------- Sqm 11.22

6.5.3 -------do ------------- @ 3 .25 kg /10sqm ------------------ do -------------- Sqm 13.09

Add extra to above item per 1.0 Kg extra in emulsion per 10 sqm Sqm 3.70

6.6 Providing and applying tack coat with bitumen VG-10 on the
prepared surface including cleaning as per IS : 8887 &
manufacturer’s specifications @ 3 kg /10sqm with a self propelled
or towed bitumen pressure sprayer equipped for spraying the
material uniformly at specified rates and temperatures as per
MoRTH specification CI.503,112 Sqm 13.20

6.6.1 -------do ------------- @ 3 .50 kg /10sqm ------------------ do -------------- Sqm 16.17

6.6.2 -------do ------------- @ 4.00 kg /10sqm ------------------ do -------------- Sqm 18.37

6.6.3 -------do ------------- @ 4.50 kg /10sqm ------------------ do -------------- Sqm 20.68

Add extra to above item per 1.0 Kg extra in bitumen VG-10 per 10
sqm Sqm 4.30

SURFACE DRESSING

6.7 Providing and laying surface dressing as wearing course

consisting of a layer of bituminous binder as per Table 500 - 20,
500 - 21 (Including cost of anti-stripping compound, wherever
required) laid on the prepared surface, followed by a cover of
crushed stone chipping of specified size (may be precoated also)
& rolling with power roller 8-10 T [MoRTH Specification : Clause
510,112] single coat surface dressing or 1st coat of the two coat
surface dressing with 0.15 cum. crushed stone chipping of 19 mm
nominal size and 12 kg. bitumen per 10 sqm. area.

6.7.1 using bitumen grade VG 10. Sqm 69.30

6.7.2 using bitumen grade VG 30. Sqm 70.40
6.7.3 using CRMB - 60 Sqm 66.00

R-22
Item No. Description Unit Rate (Rs.)
6.8 Providing and laying surface dressing as wearing course
consisting of a layer of bituminous binder as per Table 500 - 20,
500 - 21 (Including cost of anti-stripping compound, wherever
required) laid on the prepared surface, followed by a cover of
crushed stone chipping of specified size (may be precoated also)
& rolling with power roller 8-10 T [MoRTH Specification : Clause
510,112] single coat surface dressing or 1st coat of the two coat
precoated aggregate using bitumen @ 1% by weight of chips with
0.15 cum. crushed stone chipings of 19mm nominal size per 10
sqm.

6.8.1 using bitumen grade VG 10 Sqm 70.40

6.8.2 using bitumen grade VG 30 Sqm 71.50

6.8.3 using CRMB - 60 Sqm 68.20

6.9 Providing and laying surface dressing as wearing course

consisting of a layer of bituminous binder as per Table 500-20,500-
21 (Including cost of anti-stripping compound, wherever required)
laid on the prepared surface, followed by a cover of crushed stone
chipping of specified size (may be precoated also) & rolling with
power roller 8-10 T [MoRTH Specification : Clause 510,112]
second coat of two coat surface dressing or as renewal coat with
0.10 cum. crushed stone chipping of 13 mm nominal size @ 10 kg
binder per 10 sqm.

6.9.1 using bitumen grade VG 10 Sqm 56.10

6.9.2 using bitumen grade VG 30 Sqm 57.20

6.9.3 using CRMB - 60 Sqm 58.30

6.10 Providing and laying surface dressing as wearing course

consisting of a layer of bituminous binder as per Table 500-20,500-
21 (Including cost of anti-stripping compound, wherever required)
laid on the prepared surface, followed by a cover of crushed stone
chipping of specified size (may be precoated also) & rolling with
power roller 8-10 T [MoRTH Specification : Clause 510,112]
second coat of two coat surface dressing or as renewal coat
precoated aggregate using bitumen @ 1% by weight of chips with
0.10 cum. crushed stone chipping of 13 mm nominal size per 10
sqm.

6.10.1 using bitumen grade VG 10 Sqm 57.20

6.10.2 using bitumen grade VG 30 Sqm 58.30

6.10.3 using CRMB - 60 Sqm 59.40

R-23
Item No. Description Unit Rate (Rs.)

BITUMINOUS MACADAM & CONCRETE

6.11 Providing and laying bituminous macadam on prepared surface

with specified graded crushed aggregate as per table 500 - 4, for
base/binder course including loading of aggregates with F.E.
loader and heating and mixing of stone aggregate and bitumen
(including cost of antistripping compound wherever required) in hot
mix plant, transporting the mixed material in tipper to paver and
laying mixed material with sensor paver finisher to the required
level and grade, rolling by power roller & vibratory compactor to
achieve the desired density (as per job mix formula approved by
the department )excluding cost of primer /tack coat [MoRTH
Specification : Clause 504,112] with 3.30% bitumen with all lead.

6.11.1 For grading-1 (layer thickness above 75mm)

6.11.1.1 with bitumen grade VG 10 Cum 4799.30

6.11.1.2 with bitumen grade VG 30 Cum 4884.00

6.11.1.3 with CRMB - 60 Cum 4946.70

6.11.2 For grading-2 (layer thickness 50-75mm)

6.11.2.1 with bitumen grade VG 10 Cum 4799.30

6.11.2.2 with bitumen grade VG 30 Cum 4884.00

6.11.2.3 with CRMB - 60 Cum 4946.70

6.12 Providing and laying Dense Bituminous Macadam on prepared

surface with specified graded crushed aggregates as per table 510
and design mix for base/binder course including loading of
material with F.E loader, heating of binder (including cost of
antistripping compound wherever required) aggregate and filler in
hot mix plant 40-60 TPH transporting the mixed material by tippers
and laying with sensor paver finisher as per clause 507.3.5 to the
required level and grade, rolling by self propelled power rollers and
vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa
to achieve the desired density (approved by the department) but
excluding cost of primer/tack coat. [MoRTH Specification : Clause
507,112] with 4.50 % Bitumen with all lead

6.12.1 with bitumen grade VG 10 Cum 6280.00

6.12.2 with bitumen grade VG 30 Cum 6129.00

6.12.3 with CRMB - 60 Cum 6491.00

R-24
Item No. Description Unit Rate (Rs.)
6.13 Providing and laying bituminous concrete as per design mix on
prepared surface with specified graded stone as per table 500 -
18 for wearing course including loading of aggregate with F.E.
Loader and hot mixing of binder (including cost of anti-stripping
compound, wherever required) and 3% cement filler with
aggregates in hot mix plant 40-60 TPH Transporting the mix
material with tipper to paver and laying with sensor paver finisher
(as per clause 507.3.5) to the required level, grades and rolling
with vibratory compactor and pneumatic tyred roller 150 - 250
KN, TP = 0.7 MPa, to achieve the desired density (approved by
the department) excluding cost of primer/tack coat (MoRTH
Specification : Clause -509,112) with all lead

6.13.1 30-45 mm compacted thickness with 6% binder grading - 2 with all

lead of mix material
a) With straight run bitumen grade VG 30 Cum 8126.00

b) With crumb rubber modified bitumen CRMB 60 Cum 8248.00

6.13.2 50 - 65 mm compacted thicknesswith 5.5% binder grading-1 with

lead of mix material 1Km

a) With straight run bitumen grade VG 30 Cum 7477.00

b)With crumb rubber modified bitumen CRMB 60 Cum 7704.40

6.14 Providing laying & consolidation of crushed stone aggregates on

prepared surface as per Built Up Spary Grout specification, 75mm
thick as base course compacted in 2 layers composite
construction of crushed stone aggregates with application of
bitumen binder VG 30 grade with spray set at the rate of 15 Kg.
per 10 Sqm. after each layer & laying key aggregate on the top
of second layer and rolling with power roller, 8-10 tonne but
excluding cost of primer/tack coat. [MoRTH Specification : Clause
506,112] with all lead Sqm 196.90

6.15 Providing and Laying Levelling Course (profile correction course)

of precoated chips over bituminous surface using 3% of straight
run bitumen by weight of the mix, including cost of aggregate,
heating binder and aggregate in hot mix plant, laying with paver
finisher to required camber and grade, compacting with 80 to 100
KN Road Roller, cost of fuel and lubricants, hire charges including
carriage of mixed material at site of work with all lead but including
cost of bitumen, tack coat complete as per Clause 504 of MoRTH
Specifications. with all lead
Cum 4586.00
Mt 2084.50

R-25
Item No. Description Unit Rate (Rs.)
6.16 Providing and Laying Levelling Course (profile correction course)
of procoated chips over bituminous surface using 2.50% of
straight run bitumen by weight of the mix, including cost of
aggregate, heating binder and aggregate in hot mix plant, laying
with paver finisher to required camber and grade, compacting with
80 to 100 KN Road Roller, cost of fuel and lubricants, hire charges
including carriage of mixed material at site of work with all lead but
including cost of bitumen, tack coat complete as per Clause 504 of
MoRTH Specifications (Type 'B') with all lead
Cum 4089.80
Mt 1859.00

SEMI DENSE BITUMINOUS CONCRETE

6.17 Providing, laying & consolidation Semi Dense Bituminous

Concrete as per Design Mix on prepared surface with specified
graded crushed aggregates (as per table 500 - 15) for wearing
course including loading aggregates with F.E loader, heating
aggregate and binder in Hot Mix Plant 40 - 60 TPH (including cost
of anti- stripping compound wherever required ) and transporting
the mixed material with tipper and laying with paver finisher with
Sensor to the required level, rolling with Vibratory Compactor or
150 to 250 KN pneumatic tyred roller with TP=0.7 MPa and power
roller to achieve the desired density (as per approved job mix), but
excluding primer/tack coat [MoRTH Specification Clause 508,112]
with all lead

6.17.1 25 to 30 mm compacted thickness using 5% binder, grading-2 with

lead of mix material 1 km

a) with Straight run bitumen grade VG 10 Cum 6779.00

b) with Straight run bitumen grade VG 30 Cum 6914.60

c) with CRMB - 60 Cum 7015.00

6.17.2 35 to 40mm compacted thickness using 4.5% binder, grading-1

with lead of mix material 1 km

a) with Straight run bitumen grade VG 10 Cum 6276.60

b) with straight run bitumen grade VG 30 Cum 6398.70

c) with CRMB - 60 Cum 6487.80

6.17.3 25 to 30 mm compacted thickness using 5.25% binder, grading - 2

with lead of mix material 1 km. with straight run bitumen grade VG
30 Cum 7176.40

R-26
Item No. Description Unit Rate (Rs.)

MIX SEAL SURFACING

6.18 Providing and laying 20mm thick Mix Seal Surfacing on a

prepared surface in a single course composed of specified graded
crushed aggregates as per table (500-26) premixed with
bituminous binder (including cost of anti-stripping compound ,
wherever required) with all lead of mixed material (MoRTH
Specification: Clause 512,112) in a hot mix plant 40-60 TPH with
F.E. loader, laying with sensor paver finisher, transporting the
mixed material by tipper and rolling with power roller 8-10 tonne to
achieve density approved by the department, but excluding cost of
tack coat. with all lead

6.18.1 Type "A" (22 kg binder per 10 sqm)

a) with bitumen grade VG 10 Sqm 127.60
b) with bitumen grade VG 30 Sqm 129.80
c) with CRMB - 60 Sqm 132.00

6.18.2 Type "B" (19 Kg. Binder per 10 Sqm)

a) with bitumen grade VG 10 Sqm 114.40
b) with bitumen grade VG 30 Sqm 115.50
c) with CRMB - 60 Sqm 117.70

PREMIX CARPET

6.19 Providing and laying open graded premix carpet 20 mm thick

(compacted) on prepared surface in a single course as wearing
course, aggregates as per Table 500-23, heating bituminous
binder @ 14.6 Kg/10 Sqm. and aggregates in Hot Mix Plant
(including cost of antistripping compound, wherever required),
transporting the mixed material with tipper and laying with paver
finisher to the required level and grade, rolling with power roller 8 -
10 tonne but excluding cost of tack and seal coat with lead for mix
of material 1 km. (MoRTH Specification : Clause 511,112) with all
lead

6.19.1 In Hot Mix Plant 40-60 TPH, including loading of aggregates with
F.E loader.

a) with bitumen grade VG 10 Sqm 106.70

b) with bitumen grade VG 30 Sqm 104.50
c) with CRMB - 60 Sqm 105.60

6.19.2 In mini Hot Mix Plant 6-10 TPH

a) with bitumen grade VG 10 Sqm 117.70

b) with bitumen grade VG 30 Sqm 118.80
c) with CRMB - 60 Sqm 119.90

R-27
Item No. Description Unit Rate (Rs.)

6.20 Providing and applying liquid seal coat type “A” comprising of
thin application of fine aggregate of 6.7 mm size ( 0.09 cum per
10sqm ) premix with bitumin binder @ 9.8 Kg/ 10Sqm. (including
cost of anti-stripping compound, wherever required ) laying and
rolling with power roller 8-10 tonne including all lead of mix
material using hot mix plant and paver finisher, as per
specification. with all lead

a) with bitumen grade VG 10 Sqm 57.20

b) with bitumen grade VG 30 Sqm 58.30

c) with CRMB - 60 Sqm 58.30

6.21 Providing and applying premixed seal coat type "B" comprising of
thin application of fine aggregate (0.06 Cum. per 10 Sqm) premix
with 6.8 Kg. per 10 sqm bitumen binder (including cost of
antistripping compound, wherever required) in mini hot mix plant
6-10 TPH and laying and rolling with power roller 8-10 tonne
including all lead of mix material [MORTH Specification : Clause
513] with all lead

a) with bitumen grade VG 10 Sqm 36.30

b) with bitumen grade VG 30 Sqm 38.50

c) with CRMB - 60 Sqm 38.50

6.22 Providing and laying 25mm thick bitumen mastic wearing courses
with bitumen of grade as per specification and as per table 500.29,
(including cost of anti-stripping compound, wherever required) 14
to 17 % by weight as per job mix formula on prepared base
including coarse aggregate as per Table 500-30 and fine
aggregate as per table 500-31 and lime stone powder as filler
complete including tack coat.[MoRTH Specification : Clause 515]
with all lead Sqm 614.90

6.23 P&L slurry seal consisting of a mixture of fine aggregates,

Portland cement filler, bituminous emulsion and water on a road
surface including cleaning of surface, mixing of slurry seal in a
suitable mobile plant, laying and compacting to provide even riding
surface. with all lead

6.23.1 5mm thick Sqm 60.50

6.23.2 3mm thick Sqm 42.90

6.23.3 1.5 mm thick Sqm 26.40

6.24 Providing and applying low viscosity bitumen emulsion for sealing
cracks less than 3mm wide or incipient fretting or disintegration in
an existing bituminous surfacing including covering with 3mm
stone grit Sqm 33.00

R-28
Item No. Description Unit Rate (Rs.)

6.25 Cost of various grade of bitumen to be added/substracted when it

varies from the job mix formula adopted in any of the above items
and approved by Engineer-In-Charge

a) Bitumen grade VG 10 Tonne 52000.00

b) Bitumen grade VG 30 Tonne 54000.00

c) CRMB - 60 Tonne 56000.00

d) Bitumen emulsion RS-1 Tonne 42385.00

d) Bitumen emulsion SS-1 Tonne 42385.00

R-29
 Section-I (Roads)
CHAPTER - 7
CULVERTS

Item No. Description Unit Rate (Rs.)

7.1 Providing and laying mechanically mixed and vibrated Cement

Concrete in foundation upto a depth of 1.5 metres below ground level
and 1.50 metres above Ground/Bed level as per MoRTH Specification
: Clause 1000 & 1700

7.1.1 P.C.C. 1:4:8 mix with crushed stone aggregate 20 mm nominal size. Cum 2935.90

7.1.2 P.C.C. 1:4:8 mix with stone aggregate 40 mm hand broken aggregate. Cum 2698.30

7.1.3 P.C.C. 1:3:6 mix with crushed stone aggregate 20 mm nominal size. Cum 3230.70

7.1.4 P.C.C. 1:3:6 mix with stone aggragate 40 mm hand broken Cum 3003.00

7.2 Providing and laying Plain cement concrete mix with stone
aggregate 20 mm nominal size mechnically mixed and vibrated in
foundation up to a depth of 1.50 metres below ground level
and/or 1.50 metres above ground/bed level as per MoRTH
specification : clause 1000 & 1700. with all lead

7.2.1 P.C.C. grade M-15 in foundation & plinth upto 1.5 mtr. from ground
level Cum 3681.70

7.2.2 P.C.C. grade M-15 in superstructure upto 4.5 mtr. from ground level Cum 3579.40

7.2.3 R.C.C. grade M-20 in bed plates upto ground level excluding cost of
steel reinforcement but including the cost of centering & shuttering
Cum 3962.20

7.2.4 R.C.C. grade M-20 in superstructure upto 4.5 mtr. from ground level
excluding cost of steel reinforcement but including the cost of
centering & shuttering Cum 4381.30

7.2.5 R.C.C. grade M-30 in slab in superstructure at any level from ground
level excluding cost of steel reinforcement but including the cost of
centering & shuttering Cum 4611.20

7.3 Providing & fabricating steel reinforecemnt for RCC work including
cutting, bending, placing in position and binding complete including
cost of binding wire as per MoRTH Specification : Section 1000 &
1600

7.3.1 Mild Steel reinforcement Tonne 85000.00

7.3.2 Fe 415 Steel reinforcement Tonne 86000.00
7.3.3 TMT Steel reinforcement Tonne 86000.00

R-30
Item No. Description Unit Rate (Rs.)

7.4 Providing and laying stone masonry work in cement mortar 1:3 with
mechanical mixer for foundation (any level) complete including all
scaffolding etc. but excluding pointing and plastering as per drawing
and technical specification as per MoRTH Specification : Section
1000,1400

7.4.1 Coarsed rubble masonry Cum 3411.10

7.4.2 Random rubble masonry Cum 3301.10

7.5 Add extra over item No. 7.4.1 & 7.4.2 for stone masonry in
superstructure Cum 150.00

7.6 Providing and laying Brick-on-edge flooring with 1st class bricks
(minimum 10.5MPa) including cement slurry in cement sand mortar
1:4 at all levels as per MoRTH Specification : Clause 1000 & 1300
Sqm 440.00

7.7 Providing Cement pointing 1:2 deep variety (cut or weather) on brick
and tile work at all levels as per MoRTH Specfication : Clause 1000 &
1300 Sqm 115.00

7.8 Providing Cement pointing 1:2 flush or ruled on Brick-on-edge floor at

all levels as per MoRTH Specfication : Clause 1000 & 1300 Sqm 111.10

7.8(a) Raised and cut pointing on stone work in CM 1:2 (1 cement : 2 sand)
Sqm 111.10

7.9 Providing Cement plaster 12mm thick in cement mortar 1:3 at all
levels as per MoRTH Specfication: Clause:1000 & 1300 Sqm 137.50

7.10 Providing, laying & fixing in position RCC spun or hume pipes ISI
marked with proper jointing in required slope packed in the gasket of
hume or spun yarn and neatly finished with rich grout of cement
moratar 1:3 or having flexible rubber ring joint made with prefectly air
and water tight including testing of joints as per MoRTH Specfication :
Clause : 1000 & 2900

7.10.1 NP - 3
7.10.1.1 300 mm dia Metre 623.00
7.10.1.2 600 mm dia Metre 1215.00
7.10.1.3 750 mm dia Metre 2543.00
7.10.1.4 900 mm dia Metre 3005.00
7.10.1.5 1000 mm dia Metre 3901.00
7.10.1.6 1200 mm dia Metre 4858.00

7.10.2 NP - 4
7.10.2.1 300 mm dia Metre 302.00

R-31
Item No. Description Unit Rate (Rs.)
7.10.2.2 600 mm dia Metre 1215.00
7.10.2.3 750 mm dia Metre 2470.00
7.10.2.4 900 mm dia Metre 3551.33
7.10.2.5 1000 mm dia Metre 4778.00
7.10.2.6 1200 mm dia Metre 6321.00

7.11 Providing and laying Rubble stone in cement sand mortar 1:3 in
flooring at all levels as per MoRTH Specfication : Clause : 1400 Cum 3411.10

7.12 Providing and laying Dry Boulder Pitching in flooring at all levels as
per MoRTH Specification Clause: 2500 Cum 1654.40

7.13 Providing and filling in foundation trenches and at the back of

abutments, wing walls etc. and below pipe bed in layers not exceeding
150mm thick including watering and compacting, including all lead
and lifts.

7.13.1 Good local sand free from earth as per MoRTH Specification : Section
2100 Cum 539.00

7.13.2 Selected granular material in filling as per MoRTH Specification

Clause :1500 Cum 599.50

7.13.3 Filter media behind abutment, wing and return wall [MoRTH
Specification :Clause : 2504] Cum 610.50

7.14 Making and filling expansion joints with bitumen filler (Bitumen 40 Metre
percent, asbestos 5 percent and sand 55 percent) 12mm wide at any per cm
level as per MoRTH Specification : Clause : 2100 depth 13.31

7.15 Providing and fixing premoulded bitumen joint filler at any level, for
expansion joints including the cost of sealing compound and priming
coat as per MoRTH Specification : Clause : 2600

7.15.1 12mm wide Metre/

cm 4.60

7.15.2 25mm wide Metre/

cm 6.20

R-32
 Section-I (Roads)
CHAPTER - 8
TRAFFIC SIGNS

Item No. Description Unit Rate (Rs.)

8.1 S & F in position precast R.C.C. stone (M-15 mix) of standard IRC
design including finishing in cement sand mortar 1:3, painting with
enamel paint, printing letters and numerals etc. complete (MoRTH
specifications clause : 800)

8.1.1 5th km stone Each 2215.40

8.1.2 Ordinary km stone Each 1313.40

8.1.3 200 m stone Each 388.30

8.1.4 Boundary Pillars Each 457.60

8.1.5 Guide stones Each 366.30

8.2 S & F in position cut stone neatly dressed including earth work, C.C.
1:4:8 painting with enamel paint engraving letters and numerals as
per IRC standard design complete.

8.2.1 5th km stone Each 2506.90

8.2.2 Ordinary km stone for NH Each 1565.30

8.2.3 200 Mts Stone Each 408.10

8.2.4 Boundary Piller Each 466.40

8.2.5 Guide stones Each 561.00

8.3 P & F precast cement concrete M-15 grade kerb over 20 mm thick
base of cement mortar 1 : 6 including jointing with cement mortar 1:4
and painting with enamel paint complete as per MoRTH specification
clause:1000 & 1700. (Size 30Cmx30 CM x 15 CM)
Metre 242.00

8.4 Supply of mandatory/regulatory reflective sign boards fixed on 3m

long angle iron of size 65 x 65 x6 mm complete as per IRC - 67 (latest
revesion) made of 2 mm thick MS sheet with stove enamelled paint
and reflective symbol.

8.4.1 Stop signs 900 mm octagon Each 1892.00

8.4.2 Give way signs 900 mm equilateral triangle Each 1633.50

8.4.3 Prohibitory signs 600 mm dia circular Each 1633.50

R-33
Item No. Description Unit Rate (Rs.)

8.5 Supply of cautionary/warning refelective sign boards made out of

2mm thick M.S. sheet as per IRC - 67 (latest revision), stove
enamelled and refelective symbol fixed on angle iron of size 65 x 65 x
6 mm of 3 m long.

8.5.1 900 mm equilateral triangle Each 1633.50

8.5.2 Guarded/Unguarded Railway crossing with defination plate 900 mm

equilateral triangle. Each 1996.50

8.6 Supply of informatory reflective sign boards made out of 2 mm thick

M.S. sheet, stove enamelled paint as per IRC - 67 (latest revision)
fixed on angle iron of size 65 x 65 x 6 mm of 3 m long.

8.6.1 600 x 800 mm with size of square 400 mm Each 1595.00

8.6.2 450 x 600 mm with size of square 300 mm Each 1444.30

8.6.3 600 x 600 mm size parking sign Each 1606.00

8.7 Supply of route marker reflective sign boards consisting of shield

marked on M.S. plate 14 guage of size 400 x 600 mm and defination
plate of 300 x 250 mm, 14 guage fixed on M.S. posts of T- Iron or
angel iron 65 x 65 x 6 mm, 3 metre long for N.H. Each 1606.00

8.8 Supply of direction and place identification sign boards made out of
2mm thick sheet framed to angle iron 40 x 40 x 5 mm and two vertical
posts of angle size 65 x 65 x 6 mm, 3 m long with hold fasts, stove
enamelled paint and reflective letters,numerals,symbols etc. complete
of size :

8.8.1 1500 x 1200 mm Each 4781.70

8.8.2 1200 x 750 mm Each 4400.00

8.8.3 900 x 750 mm Each 3141.60

8.8.4 900 x 600 mm Each 2629.00

8.9 Supply of Mandatory / Regulatory retro reflective sign boards 60 cm

dia made out of 2.0mm thick aluminium sheet face to be fully covered
by white/ blue high intensity grade retro reflective sheeting with
Red/white symbol, cut out or screen printed back ground with epoxy
paint, complete confirming to MoRTH specifications CIause. 801 with
angle iron post 65 x 65 x 6mm 3Mtr. long.
Each 5115.00

8.10 Supply of cautionary / warning sign board 90cm equilateral triangle

made out of 2.0 mm thick aluminum sheet face to be fully covered
by white/blue high intensity grade retro reflective sheeting with Red /
white symbol, cut out or screen printed background with epoxy paint
complete confirming to MoRTH specifications clause. 801 with angle
iron post 65 x 65 x 6 mm. 3 mtr. long
Each 5252.50

R-34
Item No. Description Unit Rate (Rs.)

8.11 Supply of informatory / retro reflective sign board size 60 x 80 cm

made out of 2.0 mm thick aluminum sheet face to be fully covered by
white / blue high intensity grade retro reflective sheeting with Red/
white symbol, cut out or screen printed background with epoxy paint,
complete confirming to MoRTH specifications clause 801 with angle
iron post 65 x 65 x 6 mm, 3 Mtr. Long.
Each 5390.00

8.12 Supply of Retro-reflective sign boards size 1800x1200 mm made out

of 2 mm thick aluminium sheet duly framed with 40 mm M.S. black
tube (Medium Class) as per IS-1239 (Part-I) 1979 with Inner support
of M.S. flat 12x3 mm whole structure is fixed with two supports each
side 75 mm long and 40 mm M.S. black tube on two posts of 60 mm
dia M.S. black tube (Medium class) as per 1239 (Part-I ) 1979 2.03
metre long each and also provision of hold fasts of M.S. bars 12 mm
and 25 cm long two on each post. The sheet has to be stove
enameled or epoxy painting one side and other side retro-reflective
high intensity and black non reflective letter in non reflective sheet.
The standard letters and numbrals have to be made as per IRC 30-
1968 and the board shall be conformed to the MoRTH specifications
clause. 801 Post and outer frame of board to be painted with black
and white strips of synthetic enamel paint with black and white strips.
Each 26378.00

8.13 Supply of Retro - reflective Name Board size 600 x 900 mm made
out of 2mm thick aluminium sheet fixed on post and frame made out
or angle iron 50 x 50 x 6 mm, 3Mtr. long using stainless steel nut
bolts of 8 mm dia, aluminium sheet is covered with high intensity
grade Retro-reflective sheeting and non reflective letters in black, post
duly painted in black and white synthetic enamel, complete in all
respect. Confirming to MoRTH specifications clause. 801
Each 7320.50

8.14 Supply of Shevron sign of size 600x450 mm made out of aluminum

sheet 2 mm thick both side with fixing provision on M.S. angle iron
post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8
mm dia, plate is covered by high intensity grade retro-reflective
sheeting and black reflective arrow, complete in all respect.
Each 3657.50

8.15 Supply of sign boards made of 1.25 mm M.S. sheet duly framed with
33.30 mm ODMS black tube medium class as per IS : 1239 (Part-I)
1979 with a inner support of M.S. flat 12 x3 mm whole structure is
fixed on two posts of black M.S. tube 42mm ODMS (Medium class) as
per IS : 1239 (Part-I) 1979 height 3 m whole board is stove enamelled
painting in black & white alternate band of synthetic enamel.

8.15.1 1800 x 1200 mm Each 4992.00

8.15.2 1500 x 900 mm Each 4235.00
8.15.3 1200 x 750 mm Each 3146.00
8.15.4 900 x 600 mm Each 2057.00

R-35
Item No. Description Unit Rate (Rs.)

8.16 Supply of Village Name Board size 600 x 900 mm made out of
1.25mm thick M.S. sheet duly framed with 30 mm ODMS tube
tightened with M.S. flat 12 x 3 mm fixed on two posts of size 40 mm
ODMS tube 3m long whole board is processed in blue/white stoving
enamel paint and white / red machine cut reflective sheet complete in
all respect posts duly painted with black/white synthetic enamel.
Each 2867.70

8.17 Supply of Men at work Sign board (folding type)made of 1.25mm thick
M.S. sheet size 900 x 900 x 900 mm painted in white stove enamelled
paint and reflective machine cut sheet Men's emblem and letter MEN
AT WORK in red colours and additional attachment of size 150 x 900
mm plate for gang number and name with white stoving enamelled
back ground both plates are fixed on a folding stand of M.S. (heavy)
steel tube of size 13.2 mm outer dia as per IS : 1239 (Part-I) 1979
duly painted in grey colour and both the plates are painted on back
side in grey enamel paint.
Each 1536.70

8.18 Supply of caution diversion sign board size 1800 x 600 mm having
centre height of 75 cm made out of 1.25 mm thick M.S. sheet duly
framed with angle iron size 40 x 40 x 5 mm fixed on two moving
wheels and stands made out of 75 x 40 mm channels having two solid
rubber wheels mounted on ball bearings boards is processed in
stoving enamel blue and machine cut sheet reflective letter and arrow
on one side and the other side having arrow only complete in all
respect. Each 4525.00

8.19 Supply of flood guage (water guage) as per IRC - 67 standards, 2 m

long fixed on iron angle posts 50 x 50 x 6 mm, 2.6m long. Each 1464.00

8.20 Supply of Swiss Type Bollard made out of 1.25 mm thick M.S. sheet,
total height 135 cm, the lower portion is made in tapered circular
section having upper dia 15 cm and lower dia 20 cm with attachment
of one mandatory plate 7 mm thick fixed with the help of 7 cm long,
30mm dia crome plated M.S. tube this part is fixed on the body with
another attachment of a cap 30x7 cm. whole body is processed in
black stoving enamel and mandatory plate in Azure blue, with one
compulsory keep left arrow with 10mm border reflective strip each of
7.5 cm on body complete in all respect.
Each 2420.00

8.21 Supply of "L" type Bollard made out of 1.25 mm thick M.S. sheet
height 134 cm, welded in circular type ring section having upper dia.
15 cm and lower dia. 21 cm with another attachment of 15 x15 cm
circular section with 15 cm face plate and hold fast at bottom, whole
body is processed in white stoving enamel and red reflective 3 bands,
each of 7.5 cm and one reflective sheet of 15 cm dia. provided to it
complete in all respect. Each 2134.00

8.22 Supply of Swiss type of Hazard marker, made out of 2 mm thick M.S.
sheet size of box is 15x15 cm with hold fast at bottom, the body is
painted in orange stoving enamel paint with white/high intensity grade
micro-prismatic type sheeting, on all four side. Each 946.00

R-36
Item No. Description Unit Rate (Rs.)

8.23 Supply of Hazard marker made out of 2 mm thick M.S. sheet size 300
x 300 x 3 mm framed with angle iron 25 x 25 x 3 mm and fixed on
channel posts 75 x 40 x 6 mm and hold fast at bottom whole body is
painted in white stoving enamel and 6 Nos, 5 cm dia. reflective sheet
on white reflective back ground with additional boarder of 1.25 cm all
around it. Each 825.00

8.24 Supply of traffice cone made out of 1.25 mm thick M.S. sheet, height
1.0 m having upper dia., 8 cm, and lower dia 30 cm with base plate of
size 40 x 40 cm two hooks are to be provided for linking M.S. sheet
chain 12 mm dia, whole body is processed in orange stoving enamel
paint and one reflective band of 200 mm on it, complete in all respect
with one chain 3 Mtr. long with each cone.
Each 1650.00

8.25 Supply of Cat's Eye made of aluminium alloy size 75 x 100 x 22 mm

having 21 bi-convex lenses embedded in circular disk of ABS plastic
on each side. Each 254.00

8.26 P&F delinator with 30 cms dia RCC hume pipe ( IS-Marked) pipe
1.00 M long 40 cms embedded in earth the inside of pipe shall be
filled with cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 coarse
aggregate 20 mm nominal size ) with semi circular hump at top the
pipes shall be painted 15 cms wide alternate strips with black/ white
with enamel paint (Black strip at top) with red round reflector 7.5 cms
dia at top on side facing the traffic and opposite side (as per IRC -79 )
Each 616.00

8.27 Installation of sign boards having the posts like mandantory,

cautionary and informatory boards including excavation, fixing of
posts in 300 mm dia. RCC hume pipe (IS marked) 1.20 m long, 75 cm
embedded in ground, the in side of pipe shall be filled with cement
concrete 1 : 4 : 8 with semi-circular hump at top, the pipe shall be
painted white with enamel paint including transportation etc. complete.

8.27.1 For single post Each 506.00

8.27.2 For double post Each 1045.00

8.28 Fixing of traffic signes

8.28.1 Fixing of flood guage (water gauge) in cement concrete M -15 mix
size 300 x 300 x 600 mm including transportation, excavation etc.
complete. Each 242.00
8.28.2 Fixing of L type & Swiss Bollards in cement concrete M -15 mix size
300 x 300 x 600 mm including transportation, excavation etc.
complete. Each 330.00
8.28.3 Fixing of Hazard markers etc. in cement concrete M -15 mix including
transportation, excavation etc. complete. Each 220.00

8.28.4 Fixing of cat's eyes on road surface/walls including transportation,

excavation etc. complete. Each 66.00

R-37
Item No. Description Unit Rate (Rs.)

8.29 Supplying, hoisting and fixing in position overhead sign with a

corrosion resistant 2mm thick aluminium alloy sheet with heigh
intensity grade retro-reflective sheeting of encapsulated lens
exclusive lettering, border and signs type with vertical and lateral
clearance installed over a designed support system of aluminium alloy
or galvonised steel trestles and trusses of sections and type as per
structual design requirements and approved plans. As per MoRTH
specifications : Clause 801 & 802.

8.29.1 Truss and vertical support Tonne 64900.00

8.29.2 Aluminium alloy plate fixed with heigh intensity grade sheeting. Sqm 7920.00

8.30 Supply of direction and place identification sign boards made out of
2mm thick MS sheet framed to angle iron 40 x 40 x 5mm and 2
vertical posts of angle iron 65 x 65 x 6mm, 4.60m long with hold fasts
including excavation and fixing with CC 1:4:8 (30 x 30 x 60cm) and
transportation with painting with superior grade enamel paint of
approved quality including lettering and figuring etc. complete as per
IRC standard size 160 x 180cm (project board) Each 8646.00

8.31 Conducting traffic census at traffic count station including collection of

data during census, tabulation and computerised information
preparation arrangement of light, furniture for for sitting of two
persons, installation and maintenance of tent materials, banners, sign
boards etc. during census engagement of at least metric educated
two persons per shift of eight hours etc. complete as directed by
Engineer-In-Charge for a period of seven days. Each
station 17435

R-38
 Section-I (Roads)
CHAPTER - 9
CEMENT CONCRETE PAVMENTS

Item No. Description Unit Rate (Rs.)

9.1 Construction of dry lean cement concrete sub- base over a prepared
sub - grade with coarse and fine aggregate conforming to IS : 383, the
size of coarse aggregate not exceeding 25 mm, aggregate cement
ratio not to exceed 15 : 1, aggregate gradation after blending to be as
per Table 600 -1, cement content not to be less than 150 Kg/Cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7
days, mixed in a batching plant as per mix design, transported to site,
laid with a hydrostatic paver with electronic sensor, compacting with 8 -
10 tonne vibratory roller, finishing and curing complete as per MoRTH
specification clause 601.
Cum 2389.20

9.2 Construction of rolled cement concrete base course with coarse and
fine aggregate conforming to IS: 383 , the size of coarse aggregate
not exceeding 25 mm with minimum, aggregate cement ratio 15:1 and
minimum cement content of 200 kg/cum, aggregate gradation to be as
per Table 600-4 after blending, mixing in batching plant as per mix
design at optimum moisture content, transporting to site, laying with a
hydrostatic paver with electronic sensor, compacting with 8-10 tonnes
smooth wheeled vibratory roller to achieve, the designed flexural
strength, finishing and curing.
Cum 2534.40
9.3 Construction of un-reinforced, dowel jointed, plain cement concrete
pavement M-30, over a prepared sub-base with 43 grade cement @
400 Kg per cum, coarse and fine aggregate conforming to IS: 383,
maximum size of coarse aggregate not exceeding 25 mm, mixed in a
batching and mixing plant as per approved mix design, transported to
site, laid with a fixed form or slip form paver, spread, compacted and
finished in a continuous operation including provision of contraction,
expansion, construction and longitudinal joints, joint filler, separation
membrance, sealant primer, joint sealant, debonding strip, dowel bar,
tie rod, admixtures as approved, curing compound, finishing to lines
and grades as per drawing complete as per MoRTH specification
clause 602.
Cum 4343.90
9.4 Providing and laying anti friction layer of 3 ply bituminous with 100
mm overlapping in both direction. Sqm 15.00
9.5 Expansion joint 25 mm wide and depth 200 to 300 mm using 25 mm
thick bitumen impregnated board, dowel bars 25 mm M.S. rod 500
mm long @ 200 mm c/c with PVC sleeve as per IRC - 58 (1988)
including required steel bar (16mm dia) chairs, making hole in board,
placing whole assembly in groove incluiding cost of sealing
compound. Mtr 1300.00

R-39
 Section-I (Roads)
CHAPTER - 10
HORTICULTURE

Item No. Description Unit Rate (Rs.)

10.1 Supply at site of work well-decayed farmyard manure, from any

available source, approved by the Engineer in charge including
carrige, screening and stacking. Cum 169.13

10.2 Supplying at site of work/stone Deolied Neem Cake duly packed in

used gunny bags. Quintal 620.13

10.3 Supplying sludge duly stacked at site/store Cum 85.00

10.4 Spreading of sludge farm-yard manure or/and good earth in

required thickness (cost of sludge, farm-yard manure or/and good
earth to be paid for saparately). Cum 9.90

10.5 Mixing earth and sludge or farmyard manure in proportion specfied

or as directed. Cum 7.00

10.6 Trenching in specified soil upto a depth of 60 cm. Including removal

and stacking of servicable materials and then disposal by
spreading and neatly levelling within a lead of 50 metres and
making up the trenched area to proper levels by filling with earth

10.6.1 In ordinary soil Cum 13.50

10.6.2 Add extra for work in hard soils shall be payable for work executed
in soil other than ordinary soil at difference of rates of excavation in
oradinary soil and respective soil under item nos. Chapter R 3 item
No. 3

10.7 Rough dreesing the trenched ground including breaking of clods. 100 Sqm 23.00

10.8 Uprooting weeds from the trenched area after 10 to 15 days of its
flooding with water including diposal of uprooted vegetation. 100Sqm 264.00

10.9 Fine dreesing the ground 100 Sqm 66.00

10.10 Grassing with 'Doob' grass including watering and maintance of the
lawn for 30 days or more till the grass forms a thick lawn free from
weeds and fit for moving including supplying good earth if needed.

10.10.1 In rows 15 cm apart in either direction. 100 Sqm 258.50

10.10.2 In rows 7.5 cm apart in either direction. 100 Sqm 357.50

R-40
Item No. Description Unit Rate (Rs.)
10.10.3 In rows 5 cm apart in either direction. 100 Sqm 1462.26

10.11 Uprooting rank vegetation and weeds by digging the area to a

depth of 60cm.removing all weeds and other growth with roots by
forking repeatedly, breaking clods, rough dressing, flooding with
water, uprooting fresh growth after 10 to 15 days and then fine
100 Sqm 2810.60

10.12 Filling mixture of earth and sludge farmyard manure in the desired
proportion in trenches, flooding with water and levelling (cost of
supplying earth and sludge or farm yard manure and labour for
mixing not included in this rate). Cum 3.30

10.13 Turfing slopes of old banks with rough, grassing including

prepartion of ground,supplying and planting doob grass roots, 15
cm apart, supplying and spreading farm yard manure at rate of
0.18 cum per 100 Sqm and loosening soil with kassi. 100 Sqm 429.00

10.14 Turfing slopes of new banks with rough, grassing including

prepartion of ground,supplying and planting doob grass roots, 15
cm apart, supplying and spreading farm yard manure at rate of
0.18 cum per 100 Sqm and loosening soil with kassi. 100 Sqm 327.80

10.15 Making lawns, including ploughing and dragging with 'Swagha'(one

man with a pair of bullocks), breaking of clods, removal of rubbish,
dressing and supplying Doob grass roots, and planting at 15cm
apart, including supplying and spreading of farm - yard manure.
100 Sqm 396.00

10.16 Maintance of lawns or turfing of slopes (rough grassing) for a

period of one year including watering etc. 100 Sqm 13310.14

10.17 Turfing lawn with fine grassing including ploughing, dressing

including breaking of clods, removal of rubbish, dressing and
supplying and spreading of farm yard manure at rate 0.60 cum per
100 Sqm. 100 Sqm 800.33

10.18 Manintance of lawns with fine grassing for the first year including
watering etc. 100 Sqm 3850.00

10.19 Planting permanent hedges including digging of trenches 60cm

wide and 45cm deep refilling the excavated earth mixed with farm
yard manure supplied at the rate of 4.65 cum per 100 metres and 100
suppling and planting hedge plants at 30 cm apart. Metres 2700.00

10.20 Maintaining the hedges for the first two years including watering
etc. complete.
10.20.1 For first year Metres 50.00
10.20.2 For second year Metres 44.00

10.21 Digging holes in all kinds of soil and refilling the same with the
eaxcavated earth mixed with well decayed farm yard manure (cost
of well decayed farm yard manure to be paid separately).

R-41
Item No. Description Unit Rate (Rs.)
10.21.1 Hole 1.2 mm dia and 1.2m deep Each 39.60
10.21.2 Hole 0.6 m dia and 0.6 m deep Each 14.00
10.22 Planting & maintenance of plants and shrubs.
10.22.1 Plants and shrubs in central verge where verge is 3.0 metres and
above (200 plants 800 shrubs in two rows in one km).

10.22.1.1 Planting plants and shrubs in central verge. Metre 13.00

10.22.1.2 Maintenance of plants and shrubs in central verge for one year. Metre 94.00

10.22.2 Plants and shrubs in central verge where verge is less than 3.0
metres with one row of 400 shrubs and 100 tree plants in one Km.

10.22.2.1 Planting plants and shrubs Metre 8.80

10.22.2.2 Maintenance of plants and shrubs for one year Metre 66.00

10.23 Renovating lawns including weeding, chelling the grass, forking the
ground, top dressing with forked soil, watering and maintaining the
lawns for 30 days or more till the grass forms a thick lawn, free
from weeds and fit for moving, disposal of rubbish etc.
100 Sqm 625.00
10.24 Half brick circular tree guard in second class bricks, internal dia
1.25 metres, and Ht. 1.2 metre above ground and 0.2 metres below
ground, bottom two courses laid dry and top three courses in
cement mortar 1:6 (1 Cement, 6 Sand) and the intermediate
courses being in dry honey comb masonry, as per design
complete. Each 525.00
10.25 Edging with 2nd class bricks laid dry length wise including
excavation refilling,consolidating with and packing and spreading
nearby, the surplus earth within lead of 50 metres. Metre 13.00
10.26 Making tree guard 53 cm dia amd 1.3 m high as per design from
empty bitumen drums(supplied by the department at stock issue
rate) including providing and fixing 2 nos. M.S sheet rings 50 x 0.5
mm with rivets, complete in all respects. Each 233.00
10.27 Making tree guard 53cm dia and 2 m high as per design from
empty bitumen drums (supplied by the department at stock issue
rate) including providing and fixing four legs 40 cm long of 30 x 3
mm M.S. Flat riveted to tree guard and providing and fixing 2 nos Each 364.00
10.28 Providing and fixing Wrought iron and Mild steel welded work
(using flats, square bars,tees and channel grills, grating) frames,
gates and tree guards of any size and design etc. including cost of
screens and welding rods or bolts and nuts, complete,fixed Quintal 5610.00
10.29 1.2 metres high fencing with 1.65 metres posts placed at every 2.5
to 3 metres apart embedded in cement concrete blocks and every
tenth post to be strutted, provided with 4 horizontal lines of
G.I.barbed wire, weighing 9.34 Kg per 100 metres (minimum) and
fixed with G.I. staples, ties to 6 mm bar with binding wire or by
providing cut, including drilling holes in the posts, complete
(excluding cost of the cost, earth work and concrete). Metre 40.39

R-42
 Section-I (Roads)
CHAPTER - 11
ROAD MAINTENANCE & MISCELLANEOUS

Item No. Description Unit Rate (Rs.)

11.1 Painting and printing letter on km stone with first quality synthetic
enamel paint as per MoRTH specification clause 800

11.1.1 5th km stone Each 825.00

11.1.2 Ordinary Km Stone Each 467.50
11.1.3 200 m stone Each 40.70

11.2 Painting two coats after filling the surface with synthetic enamel
paint in all shades on new plastered or concrete surface as per
MoRTH specification clause 803 Sqm 57.20

11.3 Painting 2 coats with first quality synthetic enamel paint on steel or
wood surface including preparation of existing surface complete as
per MORTH specification clause 800 Sqm 57.20

11.4 Printing new letters and figures of any shade with synthetic enamel
paint black or any other approved colour to give an even shade.

11.4.1 Hindi (Matras, comma and the like not to be measured and paid. Cm ht. per
Half letters shall be counted as half) letter 2.20

11.4.2 English and Roman (Hyphens, commas and the like not to be Cm ht. per
measured and paid for.) letter 1.54

11.5 Providing and fixing letters/borders from reflective tape of approved

quality in standard width of MoRTH specification clause 800

11.5.1 Providing and fixing letters Cm ht. per

letter 3.96
11.5.2 Providing and fixing 50 mm wide border Cm ht. per
letter 0.85

11.6 White/colour washing of parapets, kerbs, railing, boundry stone,

guide stone, poles, trees guard etc. complete.

11.6.1 New surface three coats Sqm 8.80

11.6.2 Old surface two coats Sqm 6.60

11.6.3 Labour charges for white/colour washing Sqm 3.00

R-43
Item No. Description Unit Rate (Rs.)

11.7 White/cololur wash of trees, electric & telephone pole,guard stone

etc.up to ht.of 1.5 mtr. from the ground level comprising of
0.45m.white, 0.30m. red band in middle and again 0.45m. white
around the periphery complete two or more coats including
trimming the bushes on the stem & the root.

11.7.1 Trees dia 600 mm and above Each 13.00

11.7.2 Trees dia upto 600 mm, pole etc. Each 9.90

11.8 Applying one coat of primer of approved brand and manufacture on

wall surface including all scaffolding on new surface. Sqm 8.80

11.9 Finishing wall with water proofing cement paint of approved brand
and manufacture in required shade to give an even shade including
all scaffolding on old work one or more coats. Sqm 20.90

11.10 Painting lines, dashes, arrows etc. on road in two or more coats on
new work with ready mixed road marking paint conforming to IS :
164 on bituminous surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site and traffic control
as per MoRTH specification clause 803

11.10.1 Over 10 cm in width (white & yellow) Sqm 92.40

11.10.2 Upto 10 cm width (white & yellow) Sqm 108.90

11.11 Painting lines, dashes, arrwos etc. on roads in two coats on old
work with ready mixed road marking paint conforming to IS : 164 on
bituminous surface including cleaning the surface of all dirt, dust
and other foreign matter, demarcation at site and traffic control as
per MoRTH specification clause 803

11.11.1 Over 10 cm in width (white & yellow) Sqm 77.00

11.11.2 Upto 10 cm in width (white & yellow) Sqm 88.00

11.12 Providing and laying of hot applied thermo plastic compound

inclusive of type-1 reflectorising glass beads as per table 800.3,
800.4 applied in uniform thickness of at least 2.5 mm and spread
uniformlywith reflectorising glass beads type-2 in addition @ 250
gm/scm with a road marking machine as per IRC : 35 complete
with traffic diversion arrangement as per MoRTH specification
clause 803.4. Sqm 567.00

11.12(a) -do- without surface applied galss beads type-2 Sqm 536.58

R-44
Item No. Description Unit Rate (Rs.)
11.13 Restoration of rain cuts with soil, morrum, gravel or a mixtrue of
these including all leads and lifts and cost of arrangement of land,
cleaning the loose soil, benching for 300mm width, laying fresh
material in layers not exceeding 250mm and compacting with plate
compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
Cum 156.00

11.14 Making up loss of material/irregularties on shoulder to the design

level by adding fresh approved soil with all leads and lifts and
compacting it with plate compactor complete as per MoRTH
specification clause 3003 Sqm 41.80

11.15 Striping excess soil from the shoulder surface including disposal of
excess earth side slopes to achieve the approved level and
compacting with plate compactor upto 75mm average depth
complete as per MoRTH specification clause 3003 Sqm 12.10

11.16 Filling pot-holes and patch repairs with open-graded premix

surfacing, 20 mm with removal of all failed material trimming of
completed excavation to provide firm vertical faces, cleaning of
surface, painting of tack coat on the sides and base of excavation
as per clause 503, back filling the pot holes with hot bituminous
material as per clause 511 using 60/70 grade bitumen mixed in hot
mix plant 40-60 TPH capacity and carriage with all lead,
compacting with 8-10 tonne smooth wheel roller, trimming and
finishing the surface to form a smooth continous surface, all as per
MoRTH specification clause 3004.2
Sqm 110.00

11.17 Filling pot-holes and patch repairs with open-graded premix

surfacing, 40 mm with removal of all failed material trimming of
completed excavation to provide firm vertical faces, cleaning of
surface, painting of tack coat on the sides and base of excavation
as per clause 503, back filling the pot holes with hot bituminous
material as per clause 511 using 60/70 grade bitumen 5% of total
mix and mixed in hot mix plant 40-60 TPH capacity and carriage
with all lead as per clause 509, compacting with smooth wheel
roller 8-10 tonne, triming and finishing the surface to form a smooth
continous surface, all as per MoRTH specification clause 3004.2
Sqm 288.20

11.18 Providing & laying premix patching with specified grade of

aggregate and 3.6% bitumen including loading of aggregate with
F.E. loader, heating binder and aggretage in hot mix plant 30-40
TPH transoporting the mix material with tipper and laying manually
to required thickness including cleaning the area of patch, pot holes
cut to regular shape with vertical sides, removing all loose and
disintegrated material, application of tack coat @ 2.25 kg per 10
sqm. and compacting with 8-10 tonne power road roller including
cost of bitumen, aggregate fuel, luibrication, binder, hire charges of
machinery, T & P etc. with all lead of mixed material.
Tonne 2787.40

R-45
Item No. Description Unit Rate (Rs.)
11.19 Providing and laying built-up spray grout patching 75 mm thick in
two layers (each layer consisting of spreading aggregate (crusher
broken) @ 0.50 cum per 10 sqm area as per MoRTH specification)
laying first layer after application of tack coat @ 3.75 kg per 10 sqm
(including cost of tack coat) rolling with 8-10 tonne power road
roller and application of first spray of binder @ 15 kg/10 sqm.
Spreading and rolling of second layer of coarse aggregate with 8-
10 tonne power road roller applicationof second spray of binder @
15 kg per 10 sqm and laying key aggregate on the top of second
layer and rolling with 8-10 tonne power road roller including heating
and spraying of binder, cleaning the area of patch, pot holes cut to
regular shape, with vertical side, removing all loose and
disintegrated material including cost of coarse aggregate, key
aggregate, rolling and hire charges of machinery, T & P, fuel
bitumen etc. complete.
Sqm 206.80

11.20 Providing and laying penetration macadam patching upto 5 cm

depth (semi grout) with 0.60 cum of coarse aggregate (crusher
broken) and 0.15 cum of key aggregate (as per MoRTH
specification) and 50 kg straight run bitumen per sqm, including
heating and spreading of binder, cleaning area of patch, pot holes,
cut to regular shape with vertical sides, removing all loose and
disintegrated material spreading and compacting of aggregate with
8-10 tonne power road roller including cost of aggregate, fuel,
lubrication, hire charges of machineruy, T & P including cost of
bitumen with application of tack coat. Sqm 206.80

11.21 Providing and laying surface dressing patching using stone

chipping 0.10 cum per 10 sqm and bitumen 10 kg per 10 sqm
including heating of binder cleaning the area of patch, pot holes cut
to regular shape with vertical side removing all loose and
disintegrated material, application of binder, covering the same with
stone chippings and compacting with 8-10 tonne power road roller
including cost of fuel binder, hire charges of T & P etc. Sqm 61.71

11.22 Providing and laying 20 mm thick premix patching with 0.27

cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of
11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10
sqm of road surface including heating of binder and aggregate,
cleaning the area of patch, pot holes cut to regular shape with
vertical sides, removing all loose & disintegrated material,
application of tack coat @ 2.25 kg per 10 sqm., laying of patching
material and compacting with 8-10 tonne power road roller
including cost of bitumen , aggregate, fuel, lubrication, binder ,hire
charges of Machinery, T&P etc. Sqm 123.59

R-46
Item No. Description Unit Rate (Rs.)
11.23 Providing & laying 13mm thick premix patching with 0.18 cum of
stone chipping ( 0.12 cum of 11.2 mm size and 0.06 cum of 6.70
mm size ) mixed with 10.1 kg of straight run bitumen 80/100 per 10
sqm of road surface including heating of binder and aggregate,
cleaning the area of patch cut to regular shape with vertical sides,
removing all loose & disintegrated material, providing & application
of tack coat @ 2.25 kg per 10 sqm., laying of patching material and
compacting with 8-10 tonne power road roller including cost of
bitumen, aggregate, fuel, lubrication, binder, hire charges of
machinery, T&P etc. Sqm 81.24

11.24 Providing and laying premixed sand seal coat on patch area
comprising of thin application of fine aggregate (0.06 cum/10 sqm)
premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix
plant 6-10 TPH and laying and rolling with power roller 8-10 tonne
including all lead of mix material. Sqm 45.05

11.25 Labour charges for patching WBM surface using crushed/hand

broken aggregate including preparation of pot hole, scarifying and
re-shaping to the required grade and camber, as per the
standard specifications, spreading of material, consolidation with
mechanical drop hammer of 11.40kg hand rammer or 8-10tonne
power roller, spreading & consolidation of binding material including
cost of fuel and lubricants and hire charges of T & P.
Cum 125.00

11.26 Providing & laying crack prevention course as stress absorbing

membrance (SAM) consisting of a layer of bituminous
binder(CRMB-60)as per table 500-47 including cleaning of surface
followed by a cover of stone chipping of specific size and rolling
with power roller 8-10 tonne (MoRTH specification clause 522,112)

11.26.1 for hair crack Sqm 60.50

11.26.2 for map crack Sqm 77.00

11.26.3 For map crack alligator cracks 6 mm to 9mm

11.26.3.1 1st coat with 0.12 cum of 5.6 mm and 11.2mm chips in ratio 1:1
and binder 13kg/10sqm Sqm 81.00

11.26.3.2 2nd coat with 0.10 cum of chips of size 5.6 mm and binder
9kg/10sqm Sqm 63.00

11.26.4 Cracks above 9 mm width cracked area above 50% two coat SAM

11.26.4.1 1st coat with 0.12 m3 of 11.2 mm chips and binder 15kg/10sqm Sqm 86.00

11.26.4.2 2nd coat with 0.10 cum of chips of size 5.6 mm and binder
9kg/10sqm Sqm 59.00
11.26.5 for all types of cracks with crack width below 6 mm Sqm 60.00
11.26.6 for all types of cracks with crack width above 6 mm Sqm 77.00

R-47
Item No. Description Unit Rate (Rs.)
11.27 Filling of crack using slow curring bitumen emulsion and applying
crusher dust in cracks complete as per MoRTH specification clause
3004.3.3 Metre 3.19

11.28 Applying crusher dust to areas of road where bleeding of excess

bitumen has occurred as per MoRTH specification clause 3004.4
Sqm 0.88

11.29 Removal of existing sealant and re-sealing of contraction,

longitudinal or expansion joints in concrete pavement with fresh
sealant material hot poured rubberised bitumen of cold
polysulphide type as per clause 602.2.8 with appropriate type of
primer complete as per MoRTH specification clause 3005.2 Metre 104.00

11.30 Fixing of km stone including earthwork, cement concrete 1:4:8,

complete as per IRC standard design :

11.30.1 5 th km stone Each 632.50

11.30.2 ordinary km stone Each 467.50

11.30.3 200 m stone, guide stone and boundary pillar Each 165.00

11.31.A Providing and fixing of reinforced ferro-cement drain cover

designed for class "AA" loading duly marked on cover with
adequate steel reinforce- ment having thickness 75mm to 150 mm,
anti-corrosive bitumen painted M.S. plate, rim and on M.S. lifting
hooks, admixture like plastisizer bond-improving compound,
shrinkage resistant compound, abrasion resistant complete as per
approved design etc.

11.31.1 600 x 800 mm (125 mm thick) Each 1584.00

11.31.2 1000 x 800 mm (150 mm thick) Each 1835.90
11.31.3 1500 x 600 mm (150 mm thick) Each 2335.30
11.31.4 2100 x 500 mm (150 mm thick) Each 3336.30

11.31.B --do--class "A" loading

11.31.1 600 x 800 mm (125 mm thick) Each 1336.50

11.31.2 1000 x 800 mm (150 mm thick) Each 1501.50
11.31.3 1500 x 600 mm (150 mm thick) Each 1919.50
11.31.4 2100 x 500 mm (150 mm thick) Each 2920.50

11.32 Providing and laying chequerred plain cement concrete embossed

specially manufactured non slippery tiles of approved make on 20
mm thick cement mortar 1:6 bed, jointed with neat cement slurry
complete. Sqm 418.00

R-48
Item No. Description Unit Rate (Rs.)

11.33 Interlocking Concrete Block Pavements

11.33.1 Providing and laying of interlocking concrete block pavements

having thickness 60mm as per drawing and technical
specifications. Sqm 447.00

11.33.2 Providing and laying of interlocking concrete block pavements

having thickness 80mm as per drawing and technical
specifications. Sqm 564.00

11.33.3 Providing and laying of interlocking concrete block pavements

having thickness 100mm as per drawing and technical
specifications. Sqm 661.00

11.34 Providing & laying patchng with mixed SDBC material including
cleaning area of patch removing all loose and disintigrated material
and applying tack coat @ 2.25 kg/10 sqm with all lead, placing and
compacting of material with 8-10 tonne power road roller including
cost of bitumen grade 60/70, aggregate, fuel, lubricant, binder, hire
charges of machjinary T & P etc. complete.

11.34.1 25-30mm thick patch (with binder content 5%) Sqm 186.43

11.35 Supply & Fixing of PVC Spreed Breaker of Size 350 x 250 x 50mm
in Black/Yello colour with corrugated design on it, make Road Star
GP 1005/Dark Eye DA1005 or equivalent, including fixing base on
road with cement, grit, sand, epoxy and with four nails at corners
complete in all respect. Rmtr. 3168.00

11.36 Producing and supply of Kandhal redymade cold bituminous

patching mix in 50 Kg. plastic lined, sturdy bags for repair of
potholes in adverse climatic conditions including the bituminous
mix with a minimum of 5.6% MC-800 cutback bitumen [containing a
suitable antistripping agent] by weight of mix and in strict
conformance to gradation and other requirements such as 6- month
storage life as per the enclosed specification transfer with all leads
and lift complete in all respects as per direction of Engineer-in- 50 Kg.
charge. Bag 302.50

11.37 Labour Charges of laying of Kandhal redymade cold bituminous

patching with all lead and lift etc. complete. Per Bag 19.80

11.38 Add extra for WBM patching work cum 39.60

11.39 Supply at plant site Mix Seal Surfacing material for patch work with
specified graded crushed aggregates premixed with bitumen 4% in
hot mix plant (40-60 TPH) including cost of
aggregates,machinery,fuel,binder etc. Mt 2530.00

R-49
Item No. Description Unit Rate (Rs.)
11.40 Providing & laying Premix patching with specified grade of
aggregate and 3.6% bitumen including loading of aggregate with
F.E. loader, heating binder and aggretage in hot mix plant 30-40
TPH transoporting the mix material with tipper and laying manually
to required thickness including cleaning the area of patch, pot holes
cut to regular shape with vrtical sides. Removing all loose and
disintegrated material, application of tack coat @ 2.25 kg per 10
sqm., and compacting with 8-10 tonner power road roller including
cost of bitumen, aggregate fuel, luibrication, binder, hire charges of
machinery, T & P etc. with all lead of mixed material.
Mt 2620.00

11.41 Supply of flood gauge (water Gauge) as per I.R.C. 67 standard 200
cm long fixed on angle iron posts 50x50x6 mm, 2.6 M. long. Each 1775.00

11.42 Fixing of flood gauge (water Gauge) in cement concrete M-15 mix
size 30x30x60 cm. complete including transportation excavation
etc. complete Each 311.00

11.43 Supplying of Cat’s Eye made of aluminium alloy size 75x100x22

mm having 21 biconvex lenses embedded in circular disk of ABS
plastic on Each side. Class A Each 330.00

11.44 P& F Mukhya Mantri Sadak Yojana logo for roads funded by State
road fund having M.S. Definition plate of 1.6mm thickness frame to
steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled
paint with hold fast including paint logo as per approved design and
colours. The logo shall be made out of 1.6mm thick circular plate fix
on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the
base of circular shall be plain at the junction of base plate. The size
of definition plate shall be 1500x600mm and embedding the posts
by M-15 mix C.C. block 300x300x600 mm including lettering /
writing and painting etc. complete in all respect
Each 9449.00

11.45 Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide & 75

to 100 mm deep using mechanical concrete cutter including cost of
diamond bit cutting wheel and filling of bitumen sealing compound
in groove including cost of sealing compound. Mtr. 76.00

11.46 Steel frame work for sides of C.C. pavement consisting of M. S.

channels flats and angles with required steel pegs ( some of them
may left embedded in concrete/ including providing frame work
Sqm. 269.50

11.47 Cutting black top surface up to 1.5 M depth including all layers of
crust for laying pipe line etc. and making good to original condition
(exluding cost of bitumen and tack coat) Sqm 429.00

11.47.1 ---do----including cost of bitumen and tack coat Sqm 594.00

11.47.2 (-do-) for Paver finished surface Sqm 539.00

11.47.3 ---do----including cost of bitumen and tack coat Sqm 715.00

R-50
Item No. Description Unit Rate (Rs.)

11.48 Supply & Fixing of Manhole cover set Extra heavy duty Each 3883.00

11.49 Supply & Fixing of Manhole cover set Heavy duty Each 3278.00

11.50 Construction of Pedestal of size 5.50' x 5.50' x 1.25' in stone

masonary in CM 1:6 as per design and drawing complete with 25
mm thick plaster in CM 1:4 plaster and weather coat paint Each 7447.00

11.51 Supply & Fixing of one side polished Black granite stone 20 mm
thick of size 3' x 2' with engraved and gold colour painted letter (
upto 200 letter) & border as per direction of engineer in charge on
existing pedestals including transportation Each 7205.00

11.52 Construction of Speed Breaker of IRC standard having width of

3.70 M including cost of stone aggregate (50-25mm) size hire
charges for roller for consolidation and compaction and other
machines required for the work including cost of Bitumen Sqm 423.50

11.53 Barricating with Sal ballies as per design including tying with
vertical post by coconut strings complete in all respect with two
horizontal members height 1.2 m upto 1.5m above ground level
and vertical supports upto 2.5 centre and for 3 days period
including removal and cleaning the site complete in all respect
upto Three Days Mt 44.00

Add extra in barricating for each subsequent day after 3 days Mt 1.21

11.54 Making of holes in cement concrete/ Bitumenous road by power

driven hammer for barricating work as per direction of Engineer in
charge upto Three Days Each 84.70

11.55 Hire charges for folded type two seater sofa set (cum bed) with
good quality white cloth cover upto Three Days Each 242.00

Add extra for each subsequent day after 3 days Each 88.00

11.56 VIP Chair Luxury cushion upto Three Days Each 165.00

Add extra for each subsequent day after 3 days Each 60.50

11.57 Add extra for hire charge for providing welded mesh size 25x25
mm (16SWG) over barricating (excluding hire charge of barricating
) upto Three Days Sqm 33.00

Add extra for each subsequent day after 3 days Sqm 6.05

11.58 Water Proof Tent with pipe pandal supported with Bamboo & Balli
frame. Sqm 71.50

Add extra for each subsequent day after 3 days Sqm 17.60

11.59 Labour charges for replacement of Interlocking Block Sqm 28.60

11.60 Deduct if Non ISI mark pipes used but manufactured as per ISI 10%

R-51
Item No. Description Unit Rate (Rs.)

11.61 Painting of typical PMGSY informatory / Cityzen sign board with

Logo as per MORD specifications and drawing. All M.S. will be
stove enameled on both sides. Lettering and printing arrows,
border etc. will be painted with ready mixed synthetic enamel paint
of superior quality in required shade and colour. All sections of
framed posts and steel tube will be painted with primer and two
coats of epoxy paint as per drawing Clause 1701 and Annexure
1700.1 Each 1650.00

11.62 Painting and writing of letter on wall / on back of informatory /

Cityzen sign board , border etc. will be painted with ready mixed
synthetic enamel paint of superior quality in required shade and
colour. per instruction of engineer-in-charge Sqm 275.00

11.63 Painting of of semi reflective cautionary, mandatory and

informatory sign board as per IRC:67 MS Sheet duly stove white
colour in front and gray colour on back with red reflective border of
65 mm width and required letters and figures with reflective tape
engineering grade as per Clause 1701.3.9 of required shade and
colour as per approved drawing Clause 1701.2.2
Each 290.40

11.64 Labour charges for refixing of Interlocking Block pavement i/c

cost of bedding sand & water Sqm 72.60

11.65 Scarifying old bituminous road by making 50x50mm furrows criss-

cross at 1.0 metre intervals at 45 degree to the center line of the
carriageway 10 Sqm 18.70

11.66 Labour charges for making cofferdam by loading, transporting earth-

filled cement bags, dropping at required location in water including
transportation by boat (if required) complete, excluding cost of
empty cement bags.

with lead upto 50 Mtr. Bag 3.30

with lead 50 mtr to 100 Mtr. Bag 4.40

with lead 100 mtr to 150 Mtr. Bag 6.60

with lead 150 mtr to 200 Mtr. Bag 7.70

11.67 Construction of SAFE HOUSE near Halipad of size 30' x 30' tent
with pipes structure at VIP visit site including curtain on all
opening, carpet one Sofa Set , 30 Nos. chair and center table with
cover ,fixing of european WC, Urinal, Wash Basin, Towl rail ,Soad
Dish, Toilet self,mirror, comb, liquid soap room freshner tags,
bucket,mug,towl, napkin red flag i/c provision of water & disposal
as per direction of engineer incharge Each 35090.00

R-52
Item No. Description Unit Rate (Rs.)
11.68 Construction of Halipad of circular shape with 300 mm thick
(compacted) Gravel sub base including dressing, leveling,
compacting and watering of ground upto 100 m dia & covering
with layer of GOBER LAPE & marking of " H" ,outer line,approach
road line etc as per direction of engineer incharge
Sqm 84.70

11.69 Spreankling of water around Halipad as direction given by

engineer-in-charge KL 121.00

11.70 Providing & covering by GOBAR LAP on Halipad as direction

given by engineer-in-charge Sqm 24.20

11.71 Supply and fixing of nail Less Cats eye made out of Acrylic-strene -
Acrylonitril or Hi impact polysterene fitted wilh Moulded of
Methacrylate (NMC) reflector cube fitted wilh tightly adhering
potting compound as per A.S.T.M. D-788; size 11.5 cms x 8 cms x
2.5 cms provided with bitumineous adhesive in sufficient quantity
with Each unit for fixing. Each 272.80

11.72 Supplying and fixing solar road studs as directed by Engineer In

charge at various places of minimum size ( 110 x90x30 mm) made
out of aluminum alloys and poly carbonate, material having flat
base with load bearing capacity of 20 tonne, within built
rechargeable battery with 90 Hashes per minute Blinkers operation
of Amber / red colour with automate dusk to dawn solar switching
system with automatic battery having backup capacity for min 5
raining days, complete water proof visibility in normal climate
should be 1000 m in normal night conditions and as per technical
specification . Double sided Amber Colour
Each 2904.00

11.73 Supplying and fixing Liniar Delination System 100 mm. wide made
out of High intensity grade prismatic sheeting on aluminium foil
substrate with holes punched at suitable distances and fixing on
hazards with help of suitable screws .
Rmt 907.50

11.74 Providing and fixing of speed breakers made of abs poly carbonate
alloy yellow & black made individually size 500x400x50 mm with
two side reflectors of yellow colour 6 nos suitable holes provided on
it for fixing it on road with the help of MS nails with three abtes
locking arrangement on side of the speed breaker. It is to be fixed
on road after cement concrete on the hollow blocks provided in the
bottom. Rmt. 3206.50

R-53
Item No. Description Unit Rate (Rs.)
11.75 Providing and fixing Median Marker made of tough,high impact
resistant,injection moulded,thermoplastic body with an isosceles
trapezoidal structure of height not less than 10 cm. base not less
than 15cmx10cm and thickness not less than 1.8mm. The Median
Marker shall have fluorescent yellow / fluorescent yellow green
colour Retroreflective sheeting of size not less than 8cm x 8 cm.
and with fully reflective microprismatic sheeting as its retroreflective
elements and meets ASTM D 4956 .09 Type IX specifications.The
retroreflective sheeting shall be one side or boyh sides of median
marker as per th requirement and shall be edge protected with no
exposed edges that prevent edge lifting ,vandalism,sheeting
damage etc.Yhe median marker shall be fixed by combination of
epoxy adhesive and grouting etc complete as directed by engineer
incharge.
Each 302.50
11.76 Providing & Supply of Ready made cold mix bituminous patching
material mix in 50kg plastic lined sturdy bag for repair of pot holes
in wet climatic conditions including preparing and mixing the
bituminous mix with a minimum of 5.6% MC-800 cutback bitumen
(containing a suitable antistripping agent) by weight of mix and in
strict confirmation to gradation and other requirements such as six
months storage life as per IRC 82 and the enclosed specifications
transfer with all lead lift complete in all respect as per direction of
Engineer in charge. 50kg 629.20

11.77 Detailed Survey of Site with total station including plane table
survey of built up areas showing road level, boundary walls, electric
poles adjecent building / plot deatails, set back, other existing
structures (temperoriy or permanent) sewer lines and septic tanks
main plumbing lines, nalas or drains water bodies / water logging
areas as may be required depending upon the site conditions /
topography of the area including print out on required size paper in
three copies and one soft copy as per direction of Engineer in
charge.

For Built up area less than 10% Hactare 3520.00

For Built up area less than 10% to 50% Hactare 7040.00
For Built up area more than 50% Hactare 14080.00

11.78 Providing and laying pitching on slopes laid over prepared filter
media as per drawing and technical specifications Clause 1302
11.78.1 Stone/Boulder cum 1650.00
3245.00
11.78.2 Cement concrete blocks of size as per Table 1300.2 cast in cement
concrete of grade M 15 cum 3245.00
11.79 Road side Drain
Providing and laying Jodhpur bhura stone machine cut rough stone
patti having lengh 1.20m to 1.50 m for road side drain including
fixing and pointing In CM 1:3 laid over prepared on CC base as
per direction of Engineer incharge
11.79.1 Patti thickness 70 mm to .80 mm Sqm 660.00
11.79.2 Patti thickness 140 mm to 160 mm Sqm 990.00

R-54
Item No. Description Unit Rate (Rs.)

11.80 Providing at site, lowering & laying in trenches, aligning & jointing
of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended
up to date) marked and pipes from 300 mm and upto 1800 mm
manufactured through vertical casting process at all depths with
Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382
(including cost of Rubber gaskets, lubricants) as per drawing,
sectional hydro testing of the sewer pipe line (including cost and
conveyance of water to site for testing) etc., complete as per
specification and / or as directed by Engineer.
Note : E/w to be measured and paid separately

11.80.1 150 mm internal diameter Mtr 438.00

11.80.2 200 mm internal diameter Mtr 562.00

11.80.3 250 mm internal diameter Mtr 804.00

11.80.4 300 mm internal diameter Mtr 1060.00

11.81 Providing, lowering, laying, aligning, fixing in position and jointing at

all level/ depths full round HDPE DWC (double wall corrugated)
pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in
trenches in complete including all material, labour, sectional hydro
testing (including the cost and conveyance of water to site for
testing) and commissioning as per Technical Specifications,
drawings and as per direction of Engineer.

11.81.1 150 mm ID Mtr 394.00

11.81.2 200 mm ID Mtr 577.00

11.81.3 250 mm ID Mtr 968.00

11.81.4 300 mm ID Mtr 1410.00

11.82 Providing granular bedding having width = outer dia of pipe (Bc) +
500mm, thickness below pipe = 0.25Bc or 100mm (whichever is
higher) and haunching = 0.5Bc, with graded hard crusher broken
stone of 100% passing through 20mm sheive, 20 to 50 % passing
through 10mm sheive and 100 % retain on 6.3mm sheive, laying in
layers of thickness 10/15cm including ramming, consolidation etc
complete for all type of pipes of following sizes as per drawing and
or as directed by Engineer

11.82.1 100 mm internal diameter Mtr 100.00

11.82.2 150 mm internal diameter Mtr 115.00

11.82.3 200 mm internal diameter Mtr 133.00

11.82.4 250 mm internal diameter Mtr 149.00

R-55
Item No. Description Unit Rate (Rs.)
11.82.5 300 mm internal diameter Mtr 170.00

11.83 Providing arranging and Hydraulic testing of following RCC sewer

pipe line as per IS: 783 code of practice and / or as directed by
Engineer-in-charge complete including cost of water

11.83.1 700 mm Nominal Inside dia Mtr 189.00

11.83.2 900 mm Nominal Inside dia Mtr 244.00

11.83.3 1100 mm Nominal Inside dia Mtr 307.00

11.84 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling

upto a height of 5 m above floor level over first class kail wood
strips 25x6 mm with 10 mm gap in between and reinforced with
rabbit wire mesh fixed to wooden frame (frame work to be paid
separately

11.84.1 Flat surfaces Sqm 924.00

11.84.2 Curved surfaces Sqm 1090.00

11.84.3 Extra for any sunk or raised mouldings in the plaster of Paris
(Gypsum anhydrous) ceiling Sqm 294.00

11.84.4 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling sqm/
above 5 metres height from floor level metre 126.00

11.85 Providing and fixing thermal insulation of ceiling (under deck

insulation) with Resin Bonded Fibre glass wool conforming to IS :
8193 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin
Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm)
@ 60 cm and wire mesh of 12.5mm x 24g wire and mesh, for top
most ceiling of building. Sqm 400.00

R-56
Item No. Description Unit Rate (Rs.)
11.86 Providing, fixing and constructing of pre-cast RCC M-40 grade
circular manholes with internal dia 1.0m and up to specified depth
having pre-cast RCC M-40 grade circular manhole cover frame (ID
0.56m, OD 0.86m, height 0.20m), conical piece (top ID 0.56m,
bottom ID 1.0m, vertical height 0.605m, wall hickness 125mm), and
circular rings of required heights (ID 1.0m, height 150 / 300 mm,
wall thickness 125mm) below conical piece as per required depth
of manhole and having steel reinforcement in all pieces of manhole
@ not less than 80 kg per cum of concrete, including cast-in-situ
PCC M-10 grade (1:3:6) foundation of 1.625m dia and 150mm
thickness,
PCC M15 grade circular wall ID 0.925m, wall thickness 200mm,
height equal to OD of sewer pipe + 50 mm, PCC M15 grade
benching and channel portion and up to top level of sewer pipe etc
complete with curing compaction and form work, supplying and
fixing heavy duty SFRC manhole cover as per IS 12592 (Part I and
II), supplying and fixing plastic encapsulated CI/MS foot steps,
including cost of shuttering, steel einforcement, testing for water
tightness etc complete in all respect as per drawing, as per
Note:- Excavation of earth work and road cutting for manhole will
be measured and paid separately.

11.86.1 Pre-cast RCC M-40 grade circular manholes 1.055 m deep to

invert with pre-cast manhole cover frame (height 0.20), conical
piece (height 0.605), cast-in-situ PCC M-10 grade foundation, PCC
M15 grade circular wall ID 0.925m, wall thickness 200mm height
equal to OD of sewer pipe + 50mm, PCC M15 grade benching and each
channel portion. manhole 12200.00

11.86.2 Providing and fixing pre-cast RCC M-40 grade circular ring of ID
1.0m, wall thickness 125mm, height 150 / 300 mm for onstructing
extra depth of manhole for depth beyond 1.055m as per drawing each
manhole 6160.00

11.87 Providing and making connection to the manhole/ road side

chamber/ property chamber by cutting hole in wall, making good
the same with brick work/ stone masonry work in cement mortar
1:4, plaster in cement mortar 1:3, encasement of pipe at manhole
with 75mm thick M15 grade concrete etc complete as directed by
Engineer. Each 707.00

11.88 Raising circular manhole with circular cover 560mm dia and frame
slab to required level including dismantling existing lab, taking out
the existing CI frame & cover of manhole and raising it upto
ground/ road level, refixing of frame and cover in M15 (1:2:4)
concrete all around the frame, including making good the damage,
form work, curing, complete as directed by Engineer. (Brick work of
raising depth of manhole to be paid separately
Each 445.00

R-57
Item No. Description Unit Rate (Rs.)
11.89 Raising precast circular manhole cover and frame by taking out
existing precast frame and cover, providing and fixing precast
SFRC circular spacer of height 100/125/150mm, re-fixing existing
manhole cover frame and cover with cement sand mortar (1:3),
including making good the damage, complete as directed by
Engineer. Each 1510.00

Pre-cast RCC M-30 grade Cylindrical property chamber size

11.90
0.30m ID, 0.45m depth, 100mm wall and base thickness Each 1600.00

Pre-cast RCC M-30 grade Cylindrical property chamber size

11.91
0.450m ID, 0.60m depth, 100mm wall and base thickness Each 2500.00

Pre-cast RCC M-30 grade Cylindrical property chamber size

11.92
0.450m ID, 0.90m depth, 100mm wall and base thickness Each 3200.00

11.93 Supplying & fixing 560mm dia SFRC manhole frame & cover as per
IS : 12592-2002 in existing manholes including grouting the frame
in PCC M-15 complete in all respect as directed by the Engineer

11.93.1 HD-20 Each 2400.00

11.93.2 EHD-35 Each 2690.00

11.94 Supplying & fixing 560mm dia SFRC manhole cover as per IS :
12592-2002 in existing manholes frame complete in all respect as
directed by the Engineer

11.94.1 HD-20 Each 1270.00

11.94.2 EHD-35 Each 1570.00

11.95 Providing and laying Precast reinforced cement concrete Box

culvert section of M-40 grade designed for 'AA' class loading as per
IRC specifications including to effect of impact, EQ etc. complete
on form base of 200mm thick lean concrete of M-10 grade with
aggregate of size 40mm nominal of following internal size the work
includes required safety measures construction of drain for
diversion of flowing water cost of design of RCC Precast Box and
its proof checking from IIT/MNIT Jaipur complete in all respect as
per specifications

11.95.1 Size 2.00 M x 2.00 M Rmt 54601.00

11.95.2 Size 1.75 M x 1.75 M Rmt 41810.00

11.95.3 Size 1.50 M x 1.50 M Rmt 30717.00

11.95.4 Size 1.50 M x 1.25 M Rmt 28455.00

11.95.5 Size 1.50 M x 1.00 M Rmt 25315.00

11.95.6 Size 1.25 M x 1.25 M Rmt 22096.00

R-58
Item No. Description Unit Rate (Rs.)
11.95.7 Size 1.25 M x 1.00 M Rmt 21934.00

11.95.8 Size 1.00 M x 1.00 M Rmt 17157.00

11.95.9 Size 0.75 M x 0.75 M Rmt 11342.00

11.95.10 Size 0.60 M x 0.60 M Rmt 8346.00

11.96 P & P Precast dense cement concrete (Vibro-pressed) drain

section block of different size as per approved drawing and design
and strength as per IS code:2185 Part-I of grade 'D' (5.00mm)
proper quality of additive/admixture like plasticizer etc. added to
produce high quality and durable drain section blocks of "L" shape
"U" shape etc. as per approved design and drawing complete with
fixing and jointing in C.M. 1:4 in proper grade and level complete in
all respect including earth work and disposal of surplus earth within
0.5 Km lead (Cost of steel/welded mesh etc. shall be paid extra).

11.96.1 40mm thick Sqm 448.00

11.96.2 Up to 60mm thick Sqm 555.00

11.96.3 Up to 80mm thick Sqm 680.00

11.96.4 Up to 115mm thick Sqm 841.00

11.97 Providing and laying of interlocking concrete block pavements

having thickness 80mm of Grey Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.97.1 M20 Strength Sqm 715.00

11.97.2 M30 Strength Sqm 783.00

11.97.3 M40 Strength Sqm 873.00

11.98 Providing and laying of interlocking concrete block pavements

having thickness 80mm of Red Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.98.1 M20 Strength Sqm 749.00

11.98.2 M30 Strength Sqm 805.00

11.98.3 M40 Strength Sqm 907.00

R-59
Item No. Description Unit Rate (Rs.)
11.99 Providing and laying of interlocking concrete block pavements
having thickness 80mm of Yello Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.99.1 M20 Strength Sqm 760.00

11.99.2 M30 Strength Sqm 839.00

11.99.3 M40 Strength Sqm 918.00

11.100 Providing and laying of interlocking concrete block pavements

having thickness 60mm of Grey Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.100.1 M20 Strength Sqm 554.00

11.100.2 M30 Strength Sqm 622.00

11.100.3 M40 Strength Sqm 678.00

11.101 Providing and laying of interlocking concrete block pavements

having thickness 60mm of Red Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.101.1 M20 Strength Sqm 588.00

11.101.2 M30 Strength Sqm 650.00

11.101.3 M40 Strength Sqm 723.00

11.102 Providing and laying of interlocking concrete block pavements

having thickness 60mm of Yello Colour and any shape i.e. Zig-
Zag, I & Damru as per drawing and technical specifications
inclusive transportation complete.

11.102.1 M20 Strength Sqm 611.00

11.102.2 M30 Strength Sqm 667.00

11.102.3 M40 Strength Sqm 735.00

11.103 Providing dowel bar, tie rod, admixturess as approved drawing

Mild steel dowel bar 25 mm dia of grade S 240. 500 mm long 175
mm Center to Center at culvert/bridge slab and at construction joint
including 5 per cent wastage. Mtr 233.20

R-60
Item No. Description Unit Rate (Rs.)

NO APPROVED BSR 2022

11.104 Thermoplastic Road Marking

Providing and Laying hot applied thermoplastic road marking strip
(Kataline make or equivalent) Traffix O material of specified
shade/ colour with 2.5 mm thick including 1.6 index reflectorizing
glass beads @ 250gm/sqm, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC 35:2015. Initial reflectivity
shall be > 200 mcd/sqm/lux measured in the intial 7 days and
sustained reflectivity of 120 mcd/sqm/ lux measured at the end of 2
years by means of a Reflectometer according to IRC 35:2015
clause 15.5. The finished surface to be level, uniform and free from
streaks and holes complete complete as per direction of Engineer-
in-charge and accordance with applicable specifications.(Refer
MORTH Clause 803 for technical Specification and Performace for
IRC 35:2015)
Sqm 812.00

11.105 Profile Marking/ Audible Vibratory Markig through hot Thermoplastic

Providing and laying of Plastirib T or equivalent raised profile edge line marking
(audible vibratory) with special hot applied thermoplastic road marking compound
according to IRC 35 : 2015, Clause 7.7 with2 mm thick base coat layer above that
ribs profile size of length 40 mm x width 140 mm x height 6mm thick (Total 8 mm
thick) at the distance of 250 mm
between two ribs including reflectorizing glass beads @ 250 gm / sq. mtr. area. The
minimum and maximum width of raised profile should be 150 mm. The thickness of
8 mm profil should be exclusive of surface applied glass beads. The finished
surface to be exclusive of surface applied glass beads. The finished surface to be
levelled, uniform and free from streaks and
holes, to be applied on edge lines. As per direction of Engineer-in-charge and
accordance with applicable specifications.(Refer MORTH Clause 803.7 for
technical Specification and performace as per IRC 35:2015 )

Sqm 1410.00

11.106 Photluminiscence Vertical Surface Paint

Kerb stone/ Vertical surface painting with Reflectomark NG paint
Grade 1 (as per IS 164 ) Water based acrylic paint, preferably
mechnical application for one coat priming coat and 1 uniform
Afterglow finish coat. After glow finish surface shall provide
minimum of 10 hrs glow after fully absorbing ambient light (visibili
light or UV light) for 15 - 30 min. Cleaning of the surface thoroughly
by removing flakes,dust deposits, vegetation growth,pasted paper
etc., using coir / coil brush, so as to enable the application of
respective primer etc. Sqm 1437.00

R-61
Item No. Description Unit Rate (Rs.)
11.107 COLOURED ROAD SURFACING USING 2 COMPONENT COLD
PLASTIC
Providing and applying Cold plastic paint two component (Kataline
make or equivalent) Plastitrak material with Primer coating
rolled on surfacing material solvent free, high build two pack
seamless, tough, skid resistant, material with has property of
attaining 1.5 mm to 2.00mm thickness in single coat application red
& white (or as required colour )based on gloss and colour retaining
acrylic cross linking resin system for coloured road surfacing
including surface cleaning and cost of all material etc. complete.
(All inclusive on bitumen or concrete surface) work shall carried out
as per IRC 35-2015 clause 2.2). The finished surface tobe
level,uniform and free from streaks and holes.complete prior to
application of the primer and cold plastic material.
Sqm 2218.00

11.108 Water based Glossy Kerb Paint

Kerb stone painting with water based Trakmark Wr/ Fg paint of
Kataline make,with mechnical airless spray application for required
uniform finish of smooth gloss finish. Cleaning of the surface
thoroughly by removing flakes,dust deposits, vegetation
growth,pasted paper etc., using coir / coil brush,so as to enable the
application of respective primer etc. Sqm 239.00

11.109 Cement, Concrete flooring/ cement plaster/ Cement Concret Road,

Plain or RCC work & water retaining works providing and mixing
Additive of Synthetic polypropylene Fibrillated mesh fibers free
form any reprocess Olefins &comfirming to ASTM C 1116 Type III
4.1.3 Having grade 6mm/12mm /18mm melting point of 165 deg.C.,
strength>600 mpa Sp. Gravity:0.92g/cc, diameter 10-70 microns. It
is required in specified ratio @ 0.25% (125 Gm. Fibers in 50 Kg.
cement) for use. Mix it directly with contents in rotating site mixer
direction of Engineer in charge with all leads and lifts. Per Pack
125 gm. 62.00

11.110 Cement, Concrete Flooring/Cement Plaster/Cement Comcrete

Road, Plain or RCC work & water retaining works providing and
mixing admixture of Synthetic Nylon-6 Fibres or polycaprolactam
free from any reprocess Olefins & confirming to ASTM C 1116
Type III 4.1.3 Having grade 6mm / 12 mm /18 mm melting point
220 deg. C, Sp. Gravity:1.14 g/cc, diameter 10-40 microns. It is
required in specific ratio @ 0.20% (100 gm Fibres in 50 Kg
Cement) for use as specified by manufacture specification and
direction of Engineer In-charges with all leads and lifts. per 100
gram pack 55.00

R-62
Item No. Description Unit Rate (Rs.)
11.111 Providing and Applying ACRYLIC emulsion polymer waterproofing chemical
coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with
following method/specification:
Paint the surface with regular paint brush so as to obtain approximately 0.3mm
thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that
total thickness of the coating should be approximately 0.6mm coverage by using
above formulation will be 40 ft2/ litre of chemical. painted surface does not require
any external water curing since chemical will hold sufficient water for curing.After
the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing
compound having solar heat reduction properties coating @ 0.330 KG/SQM on the
surface of the interval of 3-4 hours. Undulation on the surface is repair before the
waterproofing work.

Sqm 550.00

11.112 Providing and mixing integral crystalline admixture for water proofing
treatment to RCC structures like basement raft, retaining walls, reservior,
sewage & water treatment plant, tunnels / subway and bridge deck etc. at
the time of transporting of concrete into the drum of the ready-mix truck ,
using integral crystalline admixture @0.80% (minimum) to the weight of
cement content per cubic meter of concrete) or higher as recommended by
the manufacturer's specification in reinforced cement concrete at site of
work. The material shall meet the requirements as specified in ACI-212-3R-
2010 i.e. by reducing permeability of concrete by more than 90%,
compared with control concrete as per DIN 1048 and resistant to 16 bar
hydrostatic pressure. The crystalline admixture shall be capable of self-
healing of cracks up to a width of 0.50mm. The work shall be carried out all
complete as per specification and the direction of the Engineer-in-charge.
The product performance shall carry guarantee for 10 years against any
leakage
Note : Approval by IRC or CPWD is mendatorty

Kg 315.00

11.113 Providing and applying fibre reinforced elastomeric liquid water proofing
membrane with resilient acrylic polymers having Sun Reflectivity Index
(SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm.
One coat of self-priming of elastomeric waterproofing liquid (dilution with
water in the ratio of 3:1) and two coats of undiluted elastomeric
waterproofing liquid (dry film thickness of complete application/system not
less than 500 microns). The operation shall be carried out after scrapping
and properly cleaning the surface to remove loose particles with wire
brushes, complete in all respect as per the direction of Engineer-in-Charge
Note : Approval by IRC or CPWD is mendatorty

Sqm 419.00

11.114 Terrace Water Proofing work with one coat of primer coat bulwark
polymocrete + applying Fiber mesh with 2 coat of bulwork PU (Complete
with 7 days flood testing) Sqm 650.00

11.115 Swimming Pool Water Proofing and Roof with One Coat of Primer Bulwark
Polymocrete + applying Fiber mesh with 2 coat of bulwark guard AC
(Cmplete with 7 day flood testing in grey coating) Sqm 600.00

R-63
Item No. Description Unit Rate (Rs.)
11.116 Cement, Concrete flooring/ cement plaster/ Cement Concrete Road, Plain
or RCC work & water retaining works providing and mixing additive of
Chemically Engineered high performance mineral additive in powder form
to reduce permeability of water and other corrosive chemicals, increase
early/ultimate strength, reduce shrinkage. It is required in specified ratio @
1% (500 gm. additive in 50 Kg cement) for use. Mix it directly with contents
in rotating site mixer in direction of engineer in charge with all leads and
lifts. Per 500
gm pack 20.00

11.117 Cement Concrete flooring/ Cement Concrete Road, Plain or RCC work providing
and mixing additive of high performance specialized additive in powder form that
helps in retaining water in concrete system for extended period of time thereby
allowing the internal curing to happen, without necessity of external water curing
and use of curing compounds. It is required in specified ratio @ 2% (1 Kg additive Per 1 Kg
in 50 Kg cement) for use. pack 85.00

11.118 Providing and laying treatment of wear & tear concrete road surface with
pre-mixed, ready to use, geopolymer based mortar upto 10 mm thickness
with following property - Curing Free, compressive strength of 15 MPa
within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and
repaired surface should be ready to use within 2 hours.
Sqm 2736.00

11.119 Repairing of potholes with minimum 25mm depth with high performance curing
free, quick-setting cement mortar in the ratio of 1:1.5:2 with following properties of
high performance cement :
Compressive strength of 10 MPa within 4 Hours, Curing free, bond strength of 4
MPa within 24 Hours, Non shrink & Non toxic.
Cum 36663.00

11.120 Construction of Panel Concrete Pavement M-40 grade for Ultra Thin white
Topping (Thickness equal to or less than 100 mm)
Construction of short paneled un reinforced, plain cement concrete pavement (Ultra
Thin white Topping as per IRC:SP:76-2015) M-40 grade concrete over a prepared
sub base or over bituminous surface (Existing bituminous surface prepared if
necessary eighter by milling or levelling course to be done with BM/DBM/DLC to
correct surface profile and to be paid separately) with Ordinary Portiand Cement 53
grade confirming to IS: 12269, coarse and fine aggregate conforming to IS 383,
maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete
mixer of not less than 0.2 cum capacity and appropriate weight batcher using
approved mix design, laid in approved fixed side formwork (Steel channel, wedges,
steel plates including levelling the formwork as per drawing), spreading the
concrete with shovels, rakes, compacted using needle, screed and plate vibrators
and finished in continues operation including provision of contraction and
expansion, construction joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/ culvert and construction joints, admixture as
approved, curing of concrete slabs for 14 days, using curing compound (where Cum 7355.00
specified) and water including vacuum dewatering process with all required

R-64
Item No. Description Unit Rate (Rs.)
11.121 Construction of Panel Concrete Pavement M-40 grade for White Topping
(Thickness greater than 100 mm or less than 200 mm)
Construction of short paneled un reinforced, plain cement concrete pavement (Thin
white Topping as per IRC:SP:76-2015) :M-40 grade concrete over a prepared sub
base or over bituminous surface (Existing bituminous surface prepared if necessary
eighter by milling or levelling course to be done with BM/DBM/DLC to correct
surface profile and to be paid separately) with Ordinary Portiand Cement 53 grade
confirming to IS: 12269, coarse and fine aggregate conforming to IS 383, maximum
size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not
less than 0.2 cum capacity and appropriate weight batcher using approved mix
design, laid in approved fixed side formwork (Steel channel, wedges, steel plates
including levelling the formwork as per drawing), spreading the concrete with
shovels, rakes, compacted using needle, screed and plate vibrators and finished in
continues operation including provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel bars, near approaches to
bridge/ culvert and construction joints, admixture as approved, curing of concrete
slabs for 14 days, using curing compound (where specified) and water including Cum 6938.00
vacuum dewatering process with all required equipments, finishing to lines and

R-65
 Section - II (Bridges)
Chapter B - 1
EARTHWORK FOR BRIDGES

Item No. Description Unit Rate (Rs.)

1 Earth work in excavation for foundation of structure complete with

all lift, dewatering, shoring and shuttering etc. including refilling of
trenches in 250 mm layers, ramming, watering and disposal of
surplus earth with all lifts and lead upto 1000 meters exclusive of
compensation of earth as per MoRTH specification Clause 301 to
305
1.1 In ordinary soil

1.1.1 Depth upto 3 metre Cum 192.50

1.1.2 Depth above 3 metre & upto 6 metre Cum 231.00

1.1.3 Depth above 6 metre Cum 275.00

1.2 In hard soil

1.2.1 Depth upto 3 metre Cum 258.50

1.2.2 Depth above 3 metre & upto 6 metre Cum 302.50

1.2.3 Depth above 6 metre Cum 341.00

1.3 In hard soil mixed with kankar,boulders etc. upto 20%

1.3.1 Depth upto 3 metre Cum 275.00
1.3.2 Depth above 3 metre & upto 6 metre cum 346.50
1.3.3 Depth above 6 metre Cum 434.50

1.4 In hard soil mixed with kankar,boulders etc. above 20%

1.4.1 Depth upto 3 metre Cum 352.00

1.4.2 Depth above 3 metre & upto 6 metre cum 434.50

1.4.3 Depth above 6 metre Cum 539.00

1.5 By blasting including blasting material

1.5.1 in soft rock Cum 495.00

1.5.2 in hard rock Cum 660.00

R-61
Item No. Description Unit Rate (Rs.)

1.6 By chieseling/wedging out rock where blasting is prohibited

1.6.1 in soft rock Cum 1299.10

1.6.2 in hard rock Cum 1948.10

1.7 In marshy soil upto 3 metre depth Cum 385.00

2 Sand filling with compaction in wells complete as per drawing and

technical specification as per MoRTH Specification : Section 1207
Cum 660.00

3 Back filling behind abutment, wing wall and return wall in 150mm
layers, with mechanical compaction, complete with all lead and lift
as per drawing and technical specification as per MoRTH
Specification : Clause : 304

3.1 Gravelly material Cum 599.50

3.2 Sandy material Cum 357.50

4 Filter media behind abutment, wing wall and return wall, complete
as per drawing and technical specification as per MoRTH
Specification : Clause:2504 Cum

R-62
 Section - II (Bridges)
Chapter B-2
FOUNDATION

Item No. Description Unit Rate (Rs.)

2.1 Brick masonry work in cement mortar 1:3, with mechanical mixer in
foundation (at any level) complete, including all scaffolding etc. but
excluding pointing and plastering as per drawing and technical
specification as per MoRTH Specification : Section 1000,1300
Cum 4338.00

2.2 Stone masonry work in cement mortar 1:3 with mechanical mixer
for foundation (any level) complete, including all scaffolding etc. but
excluding pointing and plastering as per drawing and technical
specification as per MoRTH Specification : Section 1000,1400

2.2.1 Coursed rubble masonry (first sort) Cum 3411.10

2.2.2 Random rubble masonry Cum 3301.10

2.3 Providing and laying Cement concrete for plain/reinforced concrete

in open foundation as per drawing and technical specification as
per MoRTH Specification : Section 1500, 1700 & 2100 including
form work at any level.

2.3.1 P.C.C. grade M15 Cum 3507.90

2.3.2 P.C.C. grade M20 Cum 4026.00

2.3.3 P.C.C. grade M25 Cum 4376.90

2.3.4 P.C.C. grade M30 Cum 4416.50

2.3.5 P.C.C. grade M35 Cum 4621.10

2.3.6 P.C.C. grade M40 Cum 4687.10

2.3.7 R.C.C. grade M20 Cum 4142.60

2.3.8 R.C.C. grade M25 Cum 4513.30

2.3.9 R.C.C. grade M30 Cum 4554.00

2.3.10 R.C.C. grade M35 Cum 4666.20

2.4 Providing and laying cutting edge of mildsteel weighing 40 kg per

meter for well foundation at designed level complete as per drawing
& technical specification as per MoRTH Specification : Section
1200 & 1900 Tonne 78307.00

R-63
Item No. Description Unit Rate (Rs.)
2.5 Cement Concrete for plain/reinforced concrete in open foundation
at any level, complete as per drawing and technical specifications
as per MoRTH Specification : Section 1200, 1500 & 1700 including
formwork etc.

2.5.1 Well curb

2.5.1.1 R.C.C. grade M20 Cum 4805.90

2.5.1.2 R.C.C. grade M25 Cum 5239.30

2.5.1.3 R.C.C. grade M30 Cum 5264.60

2.5.1.4 R.C.C. grade M35 Cum 5383.40

2.5.2 Well steining

2.5.2.1 P.C.C. grade M15 Cum 3852.20

2.5.2.2 P.C.C. grade M20 Cum 4259.20

2.5.2.3 P.C.C. grade M25 Cum 4651.90

2.5.2.4 P.C.C. grade M30 Cum 4693.70

2.5.2.5 R.C.C. grade M20 Cum 4282.30

2.5.2.6 R.C.C. grade M25 Cum 4679.40

2.5.2.7 R.C.C. grade M30 Cum 4825.70

2.5.2.8 R.C.C. grade M35 Cum 4934.60

2.5.2.9 R.C.C. grade M40 Cum 5053.40

2.5.3 Bottom plug including forming sump protective bunds chieselling

and making arrangement for under water connecting with tremie
pipe etc.
2.5.3.1 P.C.C. grade M20 Cum 4936.80
2.5.3.2 P.C.C. grade M25 Cum 5305.30
2.5.3.3 P.C.C. grade M30 Cum 5348.20
2.5.3.4 P.C.C. grade M35 Cum 5218.40

2.5.4 Top/Intermediate plug, including protective works and dewatering

etc.
2.5.4.1 P.C.C. grade M15 Cum 4023.80

2.5.4.2 P.C.C. grade M20 Cum 4488.00

2.5.4.3 P.C.C. grade M25 Cum 4823.50

2.5.4.4 P.C.C. grade M30 Cum 4862.00

R-64
Item No. Description Unit Rate (Rs.)

2.5.5 Well Cap

2.5.5.1 R.C.C. grade M20 Cum 4125.00

2.5.5.2 R.C.C. grade M25 Cum 4496.80

2.5.5.3 R.C.C. grade M30 Cum 4518.80

2.5.5.4 R.C.C. grade M35 Cum 4621.10

2.5.5.5 R.C.C. grade M40 Cum 4731.10

2.6 Sinking of well (other than pneumatic method of sinking) through all
types of strata complete as per drawing and technical specification
as per MoRTH : Section 1200

2.6.1 6 metre external diametre

2.6.1.1 Depth below bed level upto 3.00 metre in :

a) Sandy soil Metre 4076.60

b) Clayey soil Metre 5847.60

c) Soft rocks Metre 15283.40

2.6.1.2 Add on item no 6.1.1 for depth beyond 3 metre and upto 10 metre
for every additional metre depth of sinking over the rate of sinking
for the previous metre for sandy/clayey soil Metre 4%

2.6.1.3 Add on item no 2.6.1.1 for depth beyond 10 metre and upto 20
metre for every additional metre depth of sinking over the rate of
sinking for the previous metre for sandy/clayey soil
a) Sandy soil Metre 5%

b) Clayey soil without dewatering Metre 5%

c) Clayey rocks with dewatering Metre 10%

2.6.1.4 Add on item no 2.6.1.1 for depth beyond 20 metre for every
additional metre depth of sinking over the rate of sinking for the
previous metre for sandy/clayey soil
2.6.1.4a i)Sandy soil without kentledge Metre 7.5%

ii)Sandy soil with kentledge Metre 27.5%

2.6.1.4b i)Clayey soil without dewatering and kentledge Metre 7.5%

ii)Clayey soil with dewatering but without

kentledge Metre 12.5%

iii)Clayey soil without dewatering with

kentledge Metre 32.5%

R-65
Item No. Description Unit Rate (Rs.)

2.6.2 7 metre external diametre

2.6.2.1 Depth below bed level upto 3.00 metre in :

a) Sandy soil Metre 6200.70

b) Clayey soil Metre 8324.80

c) Soft rocks Metre 13128.50

2.6.2.2 Add on item no 2.6.2.1 for depth beyond 3 metre and upto 10
metre for every additional metre depth of sinking over the rate of
sinking for the previous metre for sandy/clayey soil Metre 4%

2.6.2.3 Add on item no 2.6.2.1 for depth beyond 10 metre and upto 20
metre for every additional metre depth of sinking over the rate of
sinking for the previous metre for sandy/clayey soil

2.6.2.3(a) Sandy soil Metre 5%

2.6.2.3(b) Clayey soil without dewatering Metre 5%

2.6.2.3(c) Clayey soil with dewatering Metre 10%

2.6.2.4 Add on item no 2.6.2.1 for depth beyond 20 metre for every
additional metre depth of sinking over the rate of sinking for the
previous metre for sandy/clayey soil

2.6.2.4(a) i)Sandy soil without kentledge Metre 7.5%

ii)Sandy soil with kentledge Metre 27.5%

2.6.2.4(b) i)Clayey soil without dewatering and kentledge Metre 7.5%

ii)Clayey soil with dewatering but without

kentledge Metre 12.5%

iii)Clayey soil without dewatering with

kentledge Metre 32.5%

2.6.3 8 metre external diametre

2.6.3.1 Depth below bed level upto 3.00 metre in :

2.6.3.1 a)Sandy soil Metre 8324.80

2.6.3.1 b)Clayey soil Metre 10186.00

2.6.3.1 c)Soft rocks Metre 14780.70

2.6.3.2 Add on item no 2.6.3.1 for depth beyond 3 metre and upto 10
metre for every additional metre depth of sinking over the rate of
sinking for the previous metre for sandy/clayey soil Metre 5%

R-66
Item No. Description Unit Rate (Rs.)
2.6.3.3 Add on item no 2.6.3.1 for depth beyond 10 metre and upto 20
metre for every additional metre depth of sinking over the rate of
sinking for the previous metre for sandy/clayey soil
2.6.3.3(a) Sandy soil Metre 5%

2.6.3.3(b) Clayey soil without dewatering Metre 5%

2.6.3.3(c) Clayey soil with dewatering Metre 10%

2.6.3.4 Add on item no 2.6.3.1 for depth beyond 20 metre for every
additional metre depth of sinking over the rate of sinking for the
previous metre for sandy/clayey soil

2.6.3.4(a) i)Sandy soil without kentledge Metre 7.5%

ii)Sandy soil with kentledge Metre 27.5%

2.6.3.4(b) i)Clayey soil without dewatering and kentledge Metre 7.5%

ii)Clayey soil with dewatering but without

kentledge Metre 12.5%

iii)Clayey soil without dewatering with

kentledge Metre 32.5%

2.7 Sand filling with compaction in wells complete as per drawing and
technical specification as per MoRTH Specification : Section 1207
Cum 700.00

2.8 Providing and fabricating steel reinforcement at any level including

cutting, binding, placing in position and binding complete in
foundation as per drawing and technical specification as per
MoRTH Specification : Section: 1600

2.8.1 Mild Steel reinforcement Tonnes 84540.00

2.8.2 FE 415 Steel reinforcement Tonnes 85720.00
2.8.3 TMT Steel reinforcement Tonnes 85720.00

2.9 Providing structural steel liner for curbs and steining for wells
including fabricating and setting out as per detailed drawing as per
MoRTH Specification : Section 1200 & 1900 Tonnes 77045.00

2.10 Bored/cast-in-situ piles complete as per drawing and technical

specification as per MoRTH Specification : Section 1100, 1600 &
1700 excluding reinforcement.

2.10.1 750 mm dia pile

10.1.1 R.C.C.grade M20 Metre 3228.00
10.1.2 R.C.C. grade M25 Metre 3277.00
10.1.3 R.C.C. grade M30 Metre 3349.00

R-67
Item No. Description Unit Rate (Rs.)

2.10.2 1000mm dia pile

2.10.2.1 R.C.C.grade M20 Metre 5194.00

2.10.2.2 R.C.C. grade M25 Metre 5282.00

2.10.2.3 R.C.C. grade M30 Metre 5415.00

2.10.3 1200mm dia pile

2.10.3.1 R.C.C.grade M20 Metre 6469.00

2.10.3.2 R.C.C. grade M25 Metre 6596.00

2.10.3.3 R.C.C. grade M30 Metre 6787.00

2.10.4 Steel Reinforcement for Bored/Cast-in-situ piles as per design,

drawing and technical specification.

2.10.4.1 Mild Steel reinforcement Tonnes 84540.00

2.10.4.2 FE 415 Steel reinforcement Tonnes 85720.00

2.10.4.3 TMT Steel reinforcement Tonnes 85720.00

2.10.5 Load testing of pile

2.10.5.1 Initial and routine test for vertical load testing of pile Tonne
load 320.00

2.10.5.2 For lateral load testing of pile Each pile 21000.00

2.11 Driven cast-in-place vertical RCC piles complete as per drawing

and technical specification as per MoRTH Specification : Section :
1100, 1600 & 1700 excluding reinforcement.

2.11.1 550mm dia pile

2.11.1.1 R.C.C.grade M20 Metre 2468.40

2.11.1.2 R.C.C. grade M25 Metre 2613.60

2.11.1.3 R.C.C. grade M30 Metre 2758.80

2.11.2 500mm dia pile

2.11.2.1 R.C.C.grade M20 Metre 2323.20

2.11.2.2 R.C.C. grade M25 Metre 2395.80

2.11.2.3 R.C.C. grade M30 Metre 2468.40

R-68
Item No. Description Unit Rate (Rs.)

2.11.3 450mm dia pile

2.11.3.1 R.C.C.grade M20 Metre 1742.40

2.11.3.2 R.C.C. grade M25 Metre 1815.00

2.11.3.3 R.C.C. grade M30 Metre 1887.60

2.11.4 Providing and laying steel reinforcement at any level including

cutting, binding, placing in position and binding complete in
Bored/Cast-in-situ piles as per drawing and technical specification
as per MoRTH Specification : Section : 1600

2.11.4.1 Mild Steel reinforcement Tonnes 85720.00

2.11.4.2 FE 415 Steel reinforcement Tonnes 85720.00

2.11.4.3 TMT Steel reinforcement Tonnes 85720.00

2.11.5 Load testing of piles.

2.11.5.1 Intial and routine test for vertical load testing of pile Tonne
load 352.00

2.11.5.2 For lateral load testing of pile Each pile 21054.00

2.12 Reinforced cement concrete in pile cap complete at all levels with
steel formwork etc. as per drawing and technical specification as
per MoRTH Specification : 1100, 1500 & 1700

2.12.1.1 R.C.C. grade M25 Structural concrete Cum 4538.60

2.12.1.2 R.C.C. grade M30 Structural concrete Cum 4588.10

2.12.1.3 R.C.C. grade M35 Design mix concrete Cum 4690.40

2.12.1.4 R.C.C. grade M40 Design mix concrete Cum 4793.80

2.12.2 Add if the bottom level of pile cap is below the water table, for
under water concreting/ dewaterning/shoring, [MoRTH
Specification: 1100(N),1500(N),1700(N)] Cum 20%

2.12.3 If the pile cap rests on ground add for levelling course as per
MoRTH Specification : 1100, 1500 & 1700 Cum 2970.00

R-69
 Section - II (Bridges)
Chapter B-3
SUBSTRUCTURE

Item No. Description Unit Rate (Rs.)

3.1 Brick masonry work with first class bricks (Minimum 10.5 MPa) in
cement mortar 1:3 with mechanical mixer in foundation (at any
level) complete, including all scaffolding etc., excluding pointing
and plastering, as per drawing and technical specification as per
MoRTH Specification : Section 1000,1300

3.1.1 Upto 5 metre height Cum 4224.00

3.1.2 Above 5 metres height Cum 4446.20

3.2 Stone masonry work in cement mortar 1:3 with mechnical mixer for
foundation complete including all scaffolding etc. excluding pointing
and plastering as per drawing and technical specification as per
MoRTH Specification : Section 1000,1400

3.2.1 Coursed rubble masonry (first sort)

3.2.1.1 Upto 5 metre height Cum 3275.80

3.2.1.2 Above 5 metres height Cum 3619.00

3.2.2 Random rubble masonry (coursed/uncoursed)

3.2.2.1 Upto 5 metre height Cum 3012.90

3.2.2.2 Above 5 metres height Cum 3322.00

3.3 Providing and laying Cement concrete for plain/reinforced concrete

in open foundation as per drawing and technical specification as
per MoRTH Specification : Section 1500, 1700 & 2100 including
form work at any level.

3.3.1 P.C.C. grade M15 upto 5 metre height Cum 3710.30

3.3.2 P.C.C. grade M20 upto 5 metre height Cum 4259.20

3.3.3 P.C.C. grade M25 upto 5 metre height Cum 4651.90

3.3.4 P.C.C. grade M25 above 5 metre & upto 10 metre height Cum 4837.80

3.3.5 P.C.C. grade M25 above 10 metre height Cum 5071.00

3.3.6 P.C.C. grade M30 upto 5 metre height Cum 4693.70

R-70
Item No. Description Unit Rate (Rs.)
3.3.7 P.C.C. grade M30 above 5 metre & upto 10 metre height Cum 4881.80

3.3.8 P.C.C. grade M30 above 10 metre height Cum 5116.10

3.3.9 P.C.C. grade M35 upto 5 metre height Cum 4812.50

3.3.10 P.C.C. grade M35 above 5 metre & upto 10 metre height Cum 5005.00

3.3.11 P.C.C. grade M35 above 10 metre height Cum 5245.90

3.3.12 P.C.C. grade M40 upto 5 metre height Cum 4954.40

3.3.13 P.C.C. grade M40 above 5 metre & upto 10 metre height Cum 5152.40

3.3.14 P.C.C. grade M40 above 10 metre height Cum 5399.90

3.3.15 R.C.C. grade M20 upto 5 metre height Cum 4282.30

3.3.16 R.C.C. grade M20 above 5 metre & upto 10 metre height Cum 4368.10

3.3.17 R.C.C. grade M20 above 10 metre height Cum 4667.30

3.3.18 R.C.C. grade M25 upto 5 metre height Cum 4679.40

3.3.19 R.C.C. grade M25 above 5 metre & upto 10 metre height Cum

3.3.20 R.C.C. grade M25 above 10 metre height Cum 5100.70

3.3.21 R.C.C. grade M30 upto 5 metre height Cum 4703.60

3.3.22 R.C.C. grade M30 above 5 metre & upto 10 metre height Cum 4774.00

3.3.23 R.C.C. grade M30 above 10 metre height Cum 5056.70

3.4 Pointing of any design with cement mortar 1:3 on Brick work in
substructure at any height as per MoRTH Specification: Clause
1309 10 Sqm 1109.90

3.5 Steel reinforecemnt in substructure complete as per MoRTH

Specification : Section 1600

3.5.1 Mild Steel reinforcement Tonne 84540.00

3.5.2 Fe 415 Steel reinforcement Tonne 85720.00

3.5.3 TMT Steel reinforcement Tonne 85720.00

3.6 Supplying, fitting and fixing in position true to line and level Cast
Steel Rocker Bearing conforming to IRC:83 (Part-I -Section IX)
complete including all accessories as per drawing and technical
specification as per MoRTH Specification : Section : 2000 Tonne
Capcity 269.50

R-71
Item No. Description Unit Rate (Rs.)
3.7 Supplying, fitting and fixing in positon true to line and level Forged
Steel Roller Bearing conforming to IRC:83 (Part-I-Section IX)
complete including all accessories as per drawing and technical Tonne
specification as per MoRTH Specification Section 2000 Capcity 408.00

3.8 Supplying, fitting and fixing in position true to line and level Sliding
Plate Bearing with PTFE surface sliding on stainless steel complete
including all accessories as per drawing and technical specfication
and BS:5400, Section 9.1 &9.2 as per MoRTH specification 2000 Tonne
Capcity 467.50

3.9 Supplying, fitting & fixing in positon true to line & level,Elastromeric
Bearing conforming to IRC:83 (Part II-Section IX) complete
including all acce-ssories as per drawing & technical specification
as per MoRTH Specfication Section 2000
3
Cm 0.67

3.10 Supplying, fitting & fixing in position true to line & level, POT-PTFE
Bearing suitable for biaxial movement as per drawing & BS:5400
Sections 9.1 & 9.2 as per MoRTH Specification Section 2000 Tonne
Capcity 365.00

3.11 Supplying, fitting and fixing in position true to line and level, Sliding
Plate Bearing with stainless steel plate sliding on stainless steel
plate with mild steel matrix as per MoRTH Specfication : Section Tonne
2000 Capcity 398.20

3.12 Providing A.C pipe Weep holes 150mm dia in Masonry/Plain

Concrete/.Reinforced Concrete abutment, wing wall/return wall
complete as per drawing and technical specfication as per MoRTH
Specification Clause 2205 Metre 187.00

3.13 Providing and laying Expansion Joint complete as per drawing and
technical specification
3.13.1 With 20mm thick Galvanized mild steel plate as per MoRTH
Specification : Section 2100, 2600 Metre 1120.00
3.13.2 With corrugated copper plate, compressible fibre board, pre-
moulded joint filter and joint sealing compound as per MoRTH
Specfication section 2600
3.13.2.1 Providing and fixing 2mm thick corrugated copper plate in
expansion joint complete. Sqm 9950.00
3.13.2.2 Providing and fixing 20mm thick compressible fibre board in
expansion joint complete. Sqm 821.00
3.13.2.3 Providing & Fixing in position 20mm thick pre-moulded joint filler in
expansion joint complete. Sqm 383.00
3.13.2.4 Providing and filling joint sealing compound -Coarse sand with Metre per
bitumen (6% by weight) Cms
depth 17.60
3.14 Slab seal type of expansion joint complete as per drawing and
technical specification including acceptance testing as specified,
tobe installed under supervision of a specialist manufacturer as per
MoRTH Specification 2600 Metre 18333.00

R-72
 Section - II (Bridges)
Chapter B-4
SUPER STRUCTURE

Item No. Description Unit Rate (Rs.)

4.1 Structural Cement concrete upto a height of 5m for reinforced

concrete in superstructure complete including steel formwork,
scaffolding etc. as per drawing and technical specification as per
MoRTH Specification 1500 & 1700

4.1.1.1 M 25 grade solid slab superstructure Cum 5208.50

4.1.1.2 M 25 grade T-beam and slab superstructure Cum 5469.20

4.1.1.3 M 25 grade box girder and balanced cantilever superstructure Cum 6250.20

4.1.2.1 M 30 grade solid slab superstructure Cum 5293.20

4.1.2.2 M 30 grade T-beam and slab superstructure Cum 5558.30

4.1.2.3 M 30 grade box girder and balanced cantilever superstructure Cum 6351.40

4.1.3.1 M 35 grade solid slab superstructure Cum 5321.80

4.1.3.2 M 35 grade T-beam and slab superstructure Cum 5588.00

4.1.3.3 M 35 grade box girder and balanced cantilever superstructure Cum 6386.60

4.1.4.1 ii)To achieve 95% Proctor density Cum 6163.30

4.1.4.2 M 40 grade T-beam and slab superstructure Cum 6471.30

4.1.4.3 M 40 grade box girder and balanced cantilever superstructure Cum 7396.40

4.2 Cement concrete for prestressed concrete in superstructre at any

level with steel formwork and scaffolding complete as per drawing
and technical specification as per MoRTH Specification: 1500 &
1700

4.2.1.1 M35 grade girder and slab superstructure. Cum 6314.00

4.2.1.2 M35 grade box girder and balanced cantilever bridge Cum 7261.10
superstructure.

4.2.2.1 M 40 grade girder and slab superstructure. Cum 6933.30

4.2.2.2 M 40 grade box girder and balanced cantilever bridge Cum 7972.80
superstructure.

4.2.3.1 M 45 grade girder and slab superstructure. Cum 6751.80

R-73
Item No. Description Unit Rate (Rs.)

4.2.3.2 M 45 grade box girder and balanced cantilever bridge Cum 7764.90
superstructure.

4.2.4.1 M50 grade girder and slab superstructure. Cum 9384.10

4.2.4.2 M50 grade box girder and balanced cantilever bridge Cum 10792.10
superstructure.

4.3 Providing and laying Steel reinforcement at any level in foundation

complete as per drawing and technical Specification as per MoRTH
Specification : Section: 1600

4.3.1 Mild steel reinforcement Tonnes 85720.00

4.3.2 Fe 415 Steel reinforcement Tonnes 85720.00

4.3.3 TMT Steel bar reinforcement Tonnes

4.4 Providing and laying High tensile steel wires/ strands at any level
including all accessories for stressing, stressing operations and
grouting complete as per drawing and technical specification as per
MoRTH Specification 1800 Tonne 117894.00

4.5 Reinforced cement concrete wearing coat M30 grade at any level
including formwork and reinforcement complete as per drawing and
technical specification as per MoRTH Specification 2202, 1500
&1700 Cum 6793.60

4.6 Providing and laying 25mm thick bitumen mastic wearing coat with
bitumen of grade S 35 as per Table 500-27, 15% by weight on
prepared base including the coarse aggregate as per table 500-29,
and lime stone powder as filler, complete including tack coat as per
MoRTH specification : clause 515 Sqm 683.10

4.7 Providing and laying reinfored Cement Concrete grade M30 design
mix railing complete as per drawing and technical specification as
per MoRTH Specification :1500, 1600 & 1700 Metre 1389.30

4.8 Providing and fixing Mild steel railing, galvanised or painted,

complete as per drawing and technical specification as per MoRTH
Specification : 1900 & 2703 Metre 1351.90

R-74
 Section - II (Bridges)
Chapter B-5
PROTECTIVE WORKS

Item No. Description Unit Rate (Rs.)

5.1 Providing and laying specified Apron complete as per drawing and
technical specification as per MoRTH Specification : Clause: 2503

5.1.1 Boulder/Quarry stone weighing not less than 40 kg (specfic gravity

not less than 2.65) Cum 1045.00

5.1.2 Boulder/Quarry stone not less than 40 kg in weight, in wire crates,

3x1.5x1.25 metre with wire diametre not less than 4mm mesh not
more than 150mm. Cum 1457.50

5.1.3 Cement concrete blocks (in M-15 grade) weighing not less than 40
kg each complete with form work etc as per MoRTH Specification:
Clause:2504 Cum 3520.00

5.2 Providing and laying graded stone aggregate Filter Material

underneath pitching on slopes complete as per drawing and
technical Specification as per MoRTH Specification : Clause 2504
Cum 1452.00

5.3 Cement concrete blocks (in M-15 grade) weighing not less than 40
kg each complete with form work etc as per MoRTH Specification:
Clause:2504

5.3.1 with R.R Stone, weighing not less than 40 Kg, thickness not less
than 150mm (Specfic gravity not less than 2.65) Cum 1485.00

5.3.2 with Cement Concrete block M15 grade, complete with form work
etc.as per MoRTH Specification: Clause : 2504, 1700 Cum 4070.00

5.4 Providing and laying flooring of Rubble stone/ C.C M15 block over
bedding complete as per drawing and technical specification as per
MoRTH Specification : Clause 2505,1700

5.4.1 Rubble stone laid in cement mortar 1:3 Cum 3025.00

5.4.2 Cement concrete block of M-15 grade including form work Cum 4290.00

5.4.3 P/L cement concrete M-15 bedding Cum 3507.90

5.5 Providing fixing and erecting 50mm dia steel pipe railing in 3 rows
duly painted on medium weight steel channels (ISMC Series)
100mm x 50mm,1.2m high above ground, 2m centre-to -centre,
complete as per approved drawings MoRTH clause 2703 Rmt. 1730.30

R-75
 Section - II (Bridges)
Chapter B-6
REPAIR AND REHABILITATION

Item No. Description Unit Rate (Rs.)

6.1 Removal of existing cement concrete wearing coat manually or with

the help of jack hammers including its disposal within a lead of
1000 metres, complete as per technical specification without
causing any detrimental effect to any part of the bridge structure.
Sqm 400.40

6.2 Guniting (Minimum density 2T/Cum) on concrete/ masonry surface

with wire mesh and cement mortar 1:3, applied with compressor
after cleaning surface and applying with epoxy complete as per
technical specification. [MoRTH Specification : Clause: 2807]
Sqm 2352.90

6.3 Providing and inserting nipples with approved fixing compound

after drilling holes for grouting as per technical specification
including subsequent cutting/removal and sealing of the holes as
necessary of nipples after completion of grouting with :

6.3.1 Cement grout [MoRTH Specification : Clause : 2806] Each 115.00

6.3.2 Epoxy grout [MoRTH Specification: Clause : 2803] Each 185.90

6.4 Sealing of cracks by injection process through nipples complete

with material and labour as per drawing and technical specification
[MoRTH Specification: Clause:2803]

6.4.1 Cement grout Kg 45.00

6.4.2 Epoxy grout Kg 2385.90

R-76