Scribd
Upload
62 views22 pages

CE413 Lecture 3 CFT Column

This document outlines a lecture on composite steel concrete structures given by Professor Dr. Mahbuba Begum. The lecture covers an assessment problem, the behavior of concrete filled tubular columns, American Institute of Steel Construction design provisions, and the axial compressive and tensile strength of concrete filled tubular columns. Design equations and factors are provided for determining the compressive and tensile strength of these columns.

Uploaded by

Shayan Abagnale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views22 pages

CE413 Lecture 3 CFT Column

This document outlines a lecture on composite steel concrete structures given by Professor Dr. Mahbuba Begum. The lecture covers an assessment problem, the behavior of concrete filled tubular columns, American Institute of Steel Construction design provisions, and the axial compressive and tensile strength of concrete filled tubular columns. Design equations and factors are provided for determining the compressive and tensile strength of these columns.

Uploaded by

Shayan Abagnale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

CE 413

Introduction to Steel Concrete


Composite Structures

Professor Dr. Mahbuba Begum

Department of Civil Engineering


Bangladesh University of Engineering and Technology, BUET
LECTURE OUTLINE

 Class Assesment Problem #1


 Behaviour of CFT columns
 AISC Design Provisions
 Axial Compressive Strength
 Axial Tensile Strength

5/16/2020 Dr. Mahbuba Begum 2


CONCRETE FILLED TUBULAR COLUMNS
(CFT/HSS)

5/16/2020 Dr. Mahbuba Begum 3


CONCRETE FILLED TUBULAR COLUMNS
(CFT/HSS)

5/16/2020 Dr. Mahbuba Begum 4


BEHAVIOUR OF CFT COLUMNS

5/16/2020 Dr. Mahbuba Begum 5


BEHAVIOUR OF CFT COLUMNS

5/16/2020 Dr. Mahbuba Begum 6


AISC DESIGN PROVISIONS

5/16/2020 Dr. Mahbuba Begum 7


AISC DESIGN PROVISIONS

5/16/2020 Dr. Mahbuba Begum 8


AISC DESIGN PROVISIONS

Local Buckling of CFT sections

5/16/2020 Dr. Mahbuba Begum 9


AISC DESIGN PROVISIONS

Local Buckling of CFT sections

5/16/2020 Dr. Mahbuba Begum 10


AISC DESIGN PROVISIONS

5/16/2020 Dr. Mahbuba Begum 11


AISC
AISCDESIGN
DESIGNPROVISIONS
PROVISIONS

5/16/2020 Dr. Mahbuba Begum 12


5/16/2020 Dr. Mahbuba Begum 13
AISC DESIGN PROVISIONS

5/16/2020 Dr. Mahbuba Begum 14


COMPRESSIVE STRENGTH OF CFT COLUMNS

The available compressive strength of axially loaded doubly


symmetric filled composite members shall be determined for the
limit state of flexural buckling,

5/16/2020 Dr. Mahbuba Begum 15


COMPRESSIVE STRENGTH OF CFT COLUMNS

5/16/2020 Dr. Mahbuba Begum 16


COMPRESSIVE STRENGTH OF CFT COLUMNS

5/16/2020 Dr. Mahbuba Begum 17


COMPRESSIVE STRENGTH OF CFT COLUMNS

5/16/2020 Dr. Mahbuba Begum 18


COMPRESSIVE STRENGTH OF CFT COLUMNS

Elastic buckling strength

π EIeff
2

Pe =
(KL) 2

EIeff = effective rigidity of composite section


K = effective length factor
L = laterally unbraced length of the member (in)

5/16/2020 Dr. Mahbuba Begum 19


COMPRESSIVE STRENGTH OF CFT COLUMNS

Nominal compressive strength


Pno
If  ≤ 2.25
Pe   Pno 
  
Pn = Pno 0.658  Pe 

Pno  
Else > 2.25
Pe
Pn = 0.877 Pe

The design compressive strength = φc Pn φc = 0.75 (LRFD)


allowable compressive strength = Pn /Ωc Ωc = 2.00 (ASD)

5/16/2020 Dr. Mahbuba Begum 20


TENSILE STRENGTH OF CFT COLUMNS

Tensile Strength
The design tensile strength, φt Pn , and allowable tensile strength,
Pn /Ωt , for filled composite columns shall be determined for the
limit state of yielding as:
Pn = As Fy + Asr Fyr

φt = 0.90 (LRFD) Ωt = 1.67 (ASD)

5/16/2020 Dr. Mahbuba Begum 21


QUESTIONS

THANK YOU

AND

5/16/2020
?Dr. Mahbuba Begum 22

You might also like