Name of Work : Repairing of Main Gate, Security guard room and other repair work of Senior Guest House

at Bachra under A-C Area. (e-NIT

No. :- 24 of 2021-22)

Remarks
Sl. No Description Quantity Unit Rate Amount (Updated Rate
based on CPWD)

Demolishing R.C.C. work manually/ by mechanical means including

stacking of steel bars and disposal of unserviceable material within 50
1 2.90 Cum 1685.90 4889.11 A.R.
metres lead as per direction of Engineer - in- charge.

Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan) including dressing of sides and ramming of 369.68 A.R.
2 1.95 Cum 189.58
bottoms, lift up to 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m.all
kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30cm in depth. 1.5m in width as
3 well as 10 sqm on plan) including disposal of excavated earth, lead up 5.92 Cum 187.10 1107.63 A.R.
to 50m and lift up to 1.5m, disposed earth to be levelled and neatly
dressed. All kinds of soil

Supplying and filling in plinth with local sand under floors including,
4 4.32 Cum 405.95 1753.70 A.R.
watering, ramming consolidating and dressing complete.
Dry brick flat soling including supply of bricks and preparing the surface
5 97.71 SQM 207.95 20318.79 A.R.
complete : With F.P.S. bricks complete
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
6 0.47 Cum 5025.60 2362.03 A.R.
level: 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40
mm nominal size)
Providing and laying in position specified grade of reinforced cement
concrete excluding the cost of centering, shuttering, finishing and
7 0.81 Cum 6905.70 5593.62 A.R.
reinforcement - All work up to plinth level 1:1.5:3 (1 cement: 1.5
coarse sand aggregate 20 mm nominal size)
Reinforced cement concrete work in walls including attached pilasters,
buttresses, plinth and string courses, fillets, columns, pillars, piers,
8 abutments, posts and struts etc. up to floor five level excluding cost of 1.25 Cum 7987.44 9984.30 A.R.
centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement :
1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Brick work with F.P.S. bricks of class designation 50 in
9 superstructure above plinth level up to floor V level in all shapes and 1.68 Cum 5840.92 9812.75 A.R.
sizes in : Cement mortar 1:6 (1 cement: 6 coarse sand)
Reinforced cement concrete work in beams, suspended floors, roofs
having slope up to 15° landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral stair cases up to floor
10 1.25 Cum 8272.45 10340.56 A.R.
five level excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size).
Reinforcement for R.C.C. work including straightening, cutting,
11 bending, placing in position and binding all complete. Thermo- 237.51 Kg 71.59 17003.34 A.R.
Mechanically Treated bars.
Centering and shuttering including strutting, propping etc. and removal
12 of form for Foundations, footings, bases of columns, etc. for mass 4.56 SQM 219.45 1000.69 A.R.
concrete.
Centering and shuttering including strutting, propping etc. and removal
13 10.00 SQM 553.10 5531.00 A.R.
of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
Centering and shuttering including strutting, propping etc. and removal
14 of form for Lintels, beams, plinth beams, girders, bressumers and 2.37 SQM 428.94 1016.59 A.R.
cantilevers
Centering and shuttering including strutting, propping etc. and removal
15 10.53 SQM 530.06 5581.53 A.R.
of form for Shelves (Cast in situ)
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar
bent to shape with hooked ends in R.C.C. slabs, beams during laying
16 1.00 Nos. 142.45 142.45 A.R.
including painting the exposed portion of loop, all as per standard
design complete.
 Brick work with F.P.S. bricks of class designation 50 in
17 1.82 Cum 4853.62 8833.59 A.R.
foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand)

Half brick masonry with F.P.S. brick of class designation 50 in

18 3.72 SQM 612.31 2277.79 A.R.
foundations and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand)

Chequered terrazo tiles 22 mm thick with graded marble chips of size

up to 6 mm in floors jointed with neat cement slurry mixed with
19 pigment to match the shade of the tiles including rubbing and polishing 36.72 SQM 1018.04 37382.43 A.R.
complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4
coarse sand): Dark shade using ordinary cement

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness

to be specified by the manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as White, Ivory, Grey, Fujaae
20 13.62 SQM 952.85 12977.82 A.R.
Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4
Coarse sand) including pointing the joints with white cement and
matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacture ) of approved
make in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge in skirting, risers of steps and
21 18.40 SQM 1018.04 18731.94 A.R.
dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm including
pointing in white cement mixed with pigment of matching shade
complete

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free,
22 26.54 Kg 396.95 10535.05 A.R.
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing and panelling to be paid
for separately): For fixed portion Anodised aluminium (anodised
transparent or dyed to required shade according to IS: 1868, Minimum
anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
23 cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / 12.81 Kg 466.21 5972.15 A.R.
stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing and panelling to be paid
for separately): For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision for fixing of
fittings wherever required including the cost of PVC / neoprene gasket
required (Fittings shall be paid for separately) Anodised aluminium
(anodised transparent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with PVC/ neoprene gasket etc. complete
24 as per the architectural drawings and the directions of engineer-in- 2.70 SQM 1983.63 5355.80 A.R.
charge. (Cost of aluminium snap beading shall be paid in basic item)
With float glass /ACP panes of 4.0 mm thickness
 Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with PVC/ neoprene gasket etc. complete
25 as per the architectural drawings and the directions of engineer-in- 3.24 SQM 864.70 2801.63 A.R.
charge. (Cost of aluminium snap beading shall be paid in basic item)
With float glass panes of 4.0 mm thickness
Dismantling old plaster or skirting raking out joints and cleaning the
26 surface for plaster including disposal of rubbish to the dumping ground 30.00 SQM 26.18 785.40 A.R.
within 50 metres lead
27 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 50.00 SQM 184.18 9209.00 A.R.
28 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) 10.00 SQM 166.14 1661.40 A.R.

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer, 3mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 Itr/sqm. by the same membrane
manufactured of density at 25°C, 0.87 - 0.89 kg/ltr and viscocity 70 -
160 cps. Over the primer coat the Jayer of membrane shall be laid using
Butane torch and sealing all joints etc., and preparing the surface
29 40.00 SQM 439.48 17579.20 A.R.
complete. The vital physical and chemical parameters of the membrane
shall be: Joint strength in longitudinal and transverse direction at 23°C
as 350/300 N/5cm. Tear strength in longitudinal and transverse
direction as 60/80N. Softening point of membrane not less than 150°C.
Cold flexibility shall be upto -2°C when tested in accordance with
ASTM, D - 5147. The laying of membrane shall be got done through the
authorised applicator of the manufacturer of membrane 3 mm thick

Providing and fixing M.S. grills of required pattern in frames of

30 windows etc. with M.S. flats, square or round bars etc. all complete. 800.00 Kg 149.56 119648.00 A.R.
Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and applying white cement based putty of average thickness

31 1 mm, of approved brand and manufacturer, over the plastered wall 25.00 SQM 110.68 2767.00 A.R.
surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand
32 and manufacture to give an even shade New work (two or more coats) 20.00 SQM 118.72 2374.40 A.R.
over and including priming coat with cement primer
Painting with synthetic enamel paint of approved brand and
33 16.00 SQM 99.38 1590.08 A.R.
manufacture to give an even shade : Two or more coats on new work
357290.46

421602.74