Tutorial 1 Answers12
Tutorial 1 Answers12
Tutorial_1
1. Why can waves with a very low frequency be used for submarine
communication? Why are they not used for data transmission in mobile
phones and computer networks
5. What are the main problems of signal propagation? Why do radio waves not
always follow a straight line?
b. Why is digital modulation not enough for radio transmission? What are
the general goals of digital modulation? What are typical schemes?
Homework
Search the Internet and describe briefly the License-free ISM band. Explain why is
the International availability of the same ISM bands important.
Answers
1) Long waves can propagate long distances so they can be transmitted through the
oceans to a submarine and can penetrate objects easily. They are not suitable for
mobile/ computer networks for the following reasons:
i. Lower frequencies also mean lower data rates so the available bandwidth is less.
ii. Lower frequencies also require large antennas for efficient transmission and
reception. This might work for submarines, not for mobile phones.
iii. Lower frequencies penetrate material more easily. Thus frequency reuse is much
more difficult.
2) Free space loss: Even if no matter exists between the sender and the receiver, the
signal still attenuates and the received power is proportional to 1/d 2. This is because
the sending energy is equally distributed over a growing sphere surface as the distance
increases between sender and receiver.
3) Short waves that are used for mobile phone systems are affected by reflection,
refraction, scattering and diffraction. So signals transmitted from a sender may
bounce off the walls of buildings and trees several times till it reaches a receiver.
6) Reflection is useful: Only in vacuum and without gravitational effects radio waves
follow a straight line. Without reflection radio reception in towns would be almost
impossible. A line.-of-sight almost never exists.
Reflection is harmful: Reflection is the main reason for multipath propagation causing
ISI.
7)
a)
Amplitude Shift Keying (ASK), below, applies two different amplitudes, one
each to 0 and1.
0 0 1 1 0 1
001101
Frequency Shift Keying (FSK) applies a different frequency, one each to 0 and 1.
0 0 1 1 0 1
Phase Shift Keying (PSK), below, applies a shift phase to each new bit. A phase