Quick Start Guide

MiniAC Plus
Version: 1.1

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.
Overview

Flash
Camera & Palm collector

Microphone

5-inch touchscreen

Card reading area

AUX Auxiliary Magnetic tamper

12V GND input
GND
Power in
RXD2 TX+ SEN switch
Sensor
TXD2 RS232 TX- GND
Ethernet BUT Exit
Button
+12V GND RX+
Speaker Reset GND RXD RX- NO1
IWD0 Wiegand TXD RS232 COM Lock
IWD1 in GND NC1
WD0 Wiegand 485A RS485
AL+
Alarm
WD1 out 485B AL-

Installation Environment

INDOOR USE KEEP DISTANCE AVOID GLASS AVOID DIRECT KEEP
EFFECTIVE

REFRACTION SUNLIGHT DISTANCE
AND EXPOSURE 0.3-2m

1
Device Installation
1 2 3
①

1.5m

①
Attach the mounting template sticker to the wall, and drill holes according
to the mounting paper. Fix the back plate on the wall using wall mounting
screws.
② Attach the device to the back plate.
③ Fasten the device to the back plate with a security screw.

Standalone Installation
Alarm Smoke

detector

Door sensor

Exit button

PC
Card Lock TCP/IP
reader

2
Door Sensor, Exit Button & Alarm Connection
Smoke
detector
+ -
AUX
-
+

GND Door Sensor

SEN
GND
BUT
Exit
Button NO1
COM
Alarm
NC1
+ -
AL+
+ -
AL-
Alarm's power switch

Lock Relay Connection

The system supports Normally Opened Lock and Normally Closed Lock.

The NO LOCK (normally opened at power on) is connected with 'NO1' and
'COM' terminals, and the NC LOCK (normally closed at power on) is connected
with 'NC1' and 'COM' terminals. Take NC Lock as an example below:

3
RS485 Connection

RXD2
TXD2
GND
RXD
TXD
GND
GND
485+
485A RS485
485-
485B Reader

Wiegand Reader/SRB Connection

+12V
+12V
GND
GND
WD0
IWD0
WD1
IWD1
WD0
WD1
Wiegand Reader

Power supply

+12V 12V
NO
GND GND
COM
IWD0 IWD 0
NC FR107
IWD1 IWD 1
WD0
WD1
Normally Closed Lock

SRB

4
Power Connection

12V 12V DC
GND
GND

Recommended power supply

1) 12V ± 10%, at least 3000mA.
2) To share the power with other devices, use a power supply
with higher current ratings.

Ethernet Connection

ZKBioAccess
TX+ 1

TX- 2
3
4
5 RJ 45
RX
6
7
8

RX-

IP address: 192.168.1.130
Subnet mask: 255.255.255.0

Default IP address: 192.168.1.201

Subnet mask: 255.255.255.0

Click [COMM.] > [Ethernet] > [IP Address] , input the IP address and click [OK].

Note: In LAN, IP addresses of the server (PC) and the device must be in the
same network segment when connecting to ZKBioAccess software.

5
User Registration
When there is no super administrator set in the device, click on to enter the menu.
After setting the super administrator, the system will request for the administrator’s
verification before entering the menu. For the security purpose, it is recommended to
register a super administrator at the first time you use the device.
Method1: Register on the device
Click
on








> [User Mgt.] > [New User] to register a new user. Settings include
entering user ID and name, registering a face, palm, password, badge and user photo,
setting user role and access control role.

Badge Number

6
Method2: Register on ZKBioAccess software
Please set the IP address and cloud service server address on the device.

1. Click [Access] > [Access Device] > [Device] > [Search Device] to add the device
to the software.
When the device has set the server address and port, it can be added automatically.

2. Click [Personnel] > [Person] > [New] to register users in the software.
3. Add users to access levels.
4. Click [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices].

For more details, please refer to the ZKBioAccess User Manual.

7
Method3: Register on the phone

Once ZKBioAccess software installation, users could enroll face via browser
application on their own mobile phone.

1. Click [Personnel] > [Parameters], input ‘’http://Server address:Port’’ in the QR Code

UGL bar. The software will automatically generates a QR code. Scan the QR code or
login onto ‘’http://Server address:Port/app/v1/adreg’’ by the mobile phone to register
users.

2. The users will display in [Personnel] > [Temporary Personnel], click [Review].

8
Ethernet and Cloud Server Settings

Click
on






> [COMM.] > [Ethernet]
to set the network parameters. If the TCP/IP
communication of the device is successful, the icon will be displayed in the
upper right corner of the standby interface.

Click
on






> [COMM.] > [Cloud Server Setting] to set the server address and server
port,
that is, the IP address and port number of the server after the software is
installed. If the device communicates with the server successfully, the icon will be
displayed in the upper right corner of the standby interface.

Access Control Settings

Click
on







> [Access Control]
to enter the access control management interface and
set relevant parameters of access control.

9
Records Query
Click
on







> [Attendance Search]
> [Attendance Record] to enter the records query
interface, input the user ID and select the time range, the corresponding attendance
logs will be displayed.

10
 m
50c
30-

1.
Place your palm within 30-50cm of the device.

2. Place your palm in the palm collection area, such that the palm is placed
parallel to the device.
3. Make sure to keep space between your fingers.

11
ZKTeco Biometrics India Pvt. Ltd. Global R&D Centre

Survey No 01/01, Outer Ring Road, Mahadevpura,

Bengaluru, Karnataka – 560048

Phone: 080-68281342/48 | Email: [email protected] | Website: www.zkteco.in

Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.