GENERAL INFORMATION ························································

VSETT RANGE - CONTROL LAYOUT, FUNCTIONS AND SPECIFICATIONS ············

INTELLIGENT TEMPERATURE CONTROL MANAGEMENT SYSTEM · · · · · · · · · · · · · · · · · ·

VSETT DISPLAY OPERATION AND PROGRAMMING ································

FOLDING HANDLE BARS ·························································

· · · · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · ·

BATTERY AND CHARGING ·······················································

····· ····· ····· ···············································

····· ··································································

····························································

ERROR CODES ···· ·····························································

INCLUDED IN THE BOX ··························································
WHY IS IT NECESSARY TO READ THIS MANUAL BEFORE OPERATING?
This manual was written to help you undertsand the proper use and maintenance of the VSETT line of Electric Scooter.
It is important to review the features and functions of your new VSETT electric scooter before using it for your own safety and enjoyment.
Your VSETT scooter will require a 100km running-in period and may need some adjustments to components.
The VSETT unit will require some adjustments and break-in period for all moving parts to adjust themselves into the correct position.
BEFORE RIDING: Please ensure that the folding mechanism is firmly locked in place and that the safety lock is engaged.

The product and its brand VSETT (company name) is not liable for any accidental damages related to the usage of this product.

It is your sole responsibility to ensure your VSETT scooter is regularly maintained to ensure it is safe to use.
- ALWAYS WEAR A HELMET WHEN RIDING
- ALWAYS FOLLOW LOCAL LAWS AND REGULATIONS
- NEVER RIDE SCOOTER IN POOR VISIBILITY
- DO NOT DO STUNTS, WHEELIES or JUMPS IF YOU DO NOT HAVE THE PROPER SAFETY EQUIPMENT.
Intelligent temperature control management system

The motor controller/s fitted to your VSETT electric Should you resume riding and a second overload event is
scooter feature overload protection. Should the controller triggered, the management system will enter a longer
temperature exceed the safety threshold, the management protection cycle. You will be unable to operate the scooter
system will enter a 30s protection cycle. Should you for between 2-3 min. The system will reset once the controller
experience a loss of power due to overload, please stop temperature drops down to normal levels
riding and allow the controller time to cool.
Intelligent temperature control management system
Vsett display operation and programming

1. Displayed content:
Speedometer / Odometer / Trip meter / Battery level / Cruise-control active light / Gear indicator / Fault warning light

2. All content on display(power on within 1 second)

Vsett display operation and programming

 Vsett display operation and programming

Zero start and non-zero start prompt; Lights on indicator;

Cruise control active indicator; Fault prompt;

Vsett display operation and programming

Vsett display operation and programming

Display P-Codes (Programming codes)

To access this menu, long-press and . Use button to scroll through P-codes, and to change parameters.

P01：Backlight brightness:The 1 level is the darkest，Level 3 brightest；Default: 3

P02：Mileage: unit,0：KM；1：MILE；Default: KM
P03: Voltage level: 24V，36V，48V，52V，60V.
P04: Dormancy time:0 means no dormancy;Other numbers are dormant time.The range is 1-60 minute.Default:5
P05: Reserve
P06: Wheel diameter: The unit is inch. The accuracy is 0.1; Default:10.0
P07: Speed measuring magnetic steel number.The range is 0-255. Default:28
P08: Rate-limiting: The range is 0-100km/h.Default: 100
P09: Zero start、no zero start setting；0 means zero start.1means no Zero start.Default: 0
P10:Reserve
P11: EABS switch choose.The range is 1-5.0 means closing.1 means weakest.2 means strongest.
P12: Soft and hard start strength.The range is 1-5. The softest is 1.The hardest is5.Default: 3
P13: Reserve
P14: Reserve
P15: Controller under-voltage
P16: ODO Zero setting: keep pressing + for 5 seconds,ODO will zero clearing.
P17: When it shows 0,it can not use cruise.When it shows 1,it can use cruise.Default:0
P18: Bind and unbind NFC CARDS.Long press "+" to build the binding, long press "-" to build the unbinding
P19: Reserve
P20: Communication protocol is defaults 4.It can not change.

Vsett display operation and programming

 Vsett display operation and programming

1. When it is shutdown, Long-press - hold button continuously for 2s to turn on the power. When it is power on ,It can change interface

between the ODO、TRIP、VOL, by pressing for short time.

2. When it is power on, Long-press - hold button continuously for 2s to turn off, Press to change gear.

3. Long-press and to enter P-code menu - refer to functions on page 18.

Enter the menu setting interface, press or to increase or decrease the value (long press to change the

direction of the addition or subtraction of the value, and "A" on the left indicates the increase value, and "D" on the left indicates the

decrease value), after the modification is finished;Press to switch to the next parameter and save the value of the previous

parameter;After parameter modification, long press + again to exit the setting interface, or wait for 8 seconds for

automatic exit and save parameters.

Vsett display operation and programming

Vsett display operation and programming

Vsett display operation and programming

 Vsett display operation and programming

Vsett display operation and programming

Vsett display operation and programming

1. Horn 8. Display
2. Single motor dual motor switching 9. Handle Folding Mechanism
3. NFC 10. Stem Folding Mechanism
4. Voltage Meter 11. Turbo / NOz Button
5. Long-press Lights on 12. Brake
6. Positive Button / Turn on the light 13. Left turn signal
7. Mode / Enter Button 14. Right turn signal

Vsett display operation and programming

 Vsett display operation and programming

Text

Press the power button for [7] seconds to turn on/off the scooter. then use NFC card to active it The scooter turns off
automatically if not used for 90 seconds

While stationary, and with the power on, press the [5] & [6] button to cycle through the three different speed levels 1
to 3.Use the throttle to control the speed within each speed level.

While power is on, press and hold Front Light button to turn on or off headlight.

While stationary, and with the power on, press and release the [7] button to cycle through the following data: ODO
(lifetime mileage),TRIP mileage, VOLTAGE level, ELECTRICAL CURRENT level and ERROR CODE.

While at maximum speed, press the Turbo / NOz [11] button to get a short boost while riding

Vsett display operation and programming

Vsett display operation and programming

Vsett display operation and programming

 Vsett display operation and programming

Vsett display operation and programming

Folding handle bars

Folding handle bars

 Folding handle bars

Folding handle bars

Suspension adjustment

Suspension adjustment
 Battery and charging

Battery and charging

Battery and charging

Battery and charging

Pre ride checks
TIRE AIR PRESSURE: THE TIRE IS PRESSURIZED TO THE STANDARD VALUE ON THE TIRE

SAFETY GEAR
Helmet: Most common and serious injuries from riding are head injuries. This can be prevented by wearing a
helmet… You must wear a helmet when riding the VSETT. The helmet must be warn according to their
instruction

MECHANICAL SAFETY

Before using the VSETT:

1) Always perform a visual inspection of all screws and nuts are tight and in place. If anything is amiss or
missing and you are unsure, please bring it back to the authorized distributor.

2) Check the tyres and wheels and that it is not showing signs of wear and tear; not in need of replacement.
Always ensure that the brake mechanism is not touching the wheels and allows free spinning.

3) Always perform mechanical checks of brakes and other parts of the scooter that allows visibility, safety and
functionailty of the scooter to be

Warning
Error codes
ERROR CODES

Error codes
 Included in the box

ITEM

Charger

Combination tool

Instruction book

NFC card

Reflective sticker

Included in the box