Yarn elements

 Yarn-fingers 10 / 8 / 8 / 8
 All yarn-finger with float position
 4 leafbinders
Monitoring  8 programmable rubber clamps
 2 knives, programmable
 1 needle latch detector  Merz positive feeder (max. 12) ()
 4 needle detectors  Memminger feeders EFS 820/920 ()
 Electronic yarn sensor, activated by  Memminger Elan-Fournisseure ()
knitting programm ()
 BTSR Ultra-Feeder ()
 Bobbin creel for 34 bobbins

3¾“ - 6“ 3¾“ - 7“ 3¾“ - 6“ 3¾“ - 7“

Control unit
CC4 II-8

3¾“ - 6“ 3¾“ - 7“
 Pattern memory 1 MB (dynamic)
 Programm memory on flash memory
 USB memory Knitting unit
 Ethernet Interface
 10,4“ touchscreen color display  4 Knitting feeds
 Automation software with machine data collection ()  Needle selection 8 piezo actuators
 Data transfer to and from the machine possible  Stitch adjustment per feed diagonal by step motor
 Battery backup on power failure  Accuracy 0,01 mm position controlled
 Very fast software update  Appliance for automatic double-welt transfer step
motor driven, up to 5 mm above transfer position
 circular cutter, gauge independent
 Mechanical latch opener needle
 Sinkers adjustable by step motor
 1 suction pipe for yarn ends supported by blowing air
 Nominal cylinder diameters 3 ¾“ / 4 ¼“ / 4 ¾“ / 5 ½“ / 6“ / 7“
3¾“ - 6“ 3¾“ - 7“  Gauge E14 – E41
 Change of gauge possible ()
 Sinker cam adjustable by step motor
 Sinker cap adjustable by step motor
Draw-off unit  plush 1,95mm / 3,00mm ()
technical data

Merz Maschinenfabrik GmbH • Haigerlocher Straße 44 • 72379 Hechingen • Deutschland / Germany

Telefon: +49 (0) 7471 926 - 0 • Fax: +49 (0) 7471 926 - 200 • [email protected] • www.merz-mf.de

 Suction draw off unit ø 60

 Suction draw off unit ø 70 ()
 Suction air controlled by step motor
 Anti twist device
 Large ejection pot Motor / Lubrication
 Blower unit 2,2 kW ()
 Maintenance free electric motor
 Blower unit 1,5 kW ()
 Motor power 1,1 kW
 Mechanical hand wheel
 Compressed air lubricator with oil recycling

Knitting speed 3 ¾“ : 400 RPM | 4 ¼“ : 370 RPM | 4 ¾“ : 340 RPM | 5 ½“ : 290 RPM | 6“ : 270 RPM | 7“ : 230 RPM

Power-consumption approx. 0,8 kWh without blower unit | approx. 2,3 kWh with blower unit

Air-consumption approx. 5 l/min. wthout options

Air-Supply connection
3¾“ - 6“ 3¾“ -67“
bar

Weight Net- weight

3¾“ 6“ approx.
3¾“400
- 7“kg | Gross weight approx. 600 kg
Merz reserves the right to modify at any time and without any previous notice the machine characteristics mentioned in this sheet.
Machine according to CE | () Options