Fire Detection S stems

Control Panels and Modules

Product Catalogue
 Product Sheet DetecƟon

Table of Contents Page

Fire alarm and exƟnguishing panels
FMZ 5000 base unit 1
AddŝƟonal and alternaƟve components of the FMZ 5000 2
Fire alarm panel FMZ 5000 mod 4 3
Fire alarm panel FMZ 5000 mod 12 LSZ AP 4
Fire alarm panel FMZ 5000 mod XL 21U 5
Fire alarm panel FMZ 5000 mod XL 31U 6
Fire alarm panel FMZ 5000 mod XL 40U 7
FMZ 5000 Loop AP XP module 8
FMZ 5000 convenƟonal detector module 9
FMZ 5000 control group module 10
FMZ 5000 8 relay module 11
FMZ 5000 MxNet module 12
FMZ 5000 WEBNetmodule N & S cpl. 13
FMZ 5000 Modbus module 14
FMZ 5000 SIO1 module 15
FMZ 5000 SIO3 module 16
Fire alarm panel SOLID CFS 17

AspiraƟng smoke detecƟon systems

AMX4004 18
AMX5004 C 19
Fire brigade and system accessories
LMT-4 LED graphic panel 20

Management systems
Inveron – Hazard Management System 21

© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 base unit

FMZ 5000 –
Each FMZ 5000 model is a highly modern unit combining

•
•

•
•
301-410_019 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 base unit

Additional and alternative components of the FMZ 5000

301-010_002 / AI01_2016en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 base unit

Fire alarm panel FMZ 5000 mod XL 21U Part no.: 905454
FMZ 5000

Application Product features

•

•
•

•
•

Included in delivery

Not included in delivery

Note
301-410_009 / AI00_2015en

Approvals / marking

Approval holder: Minimax GmbH & Co. KG

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 base unit

Fire alarm panel FMZ 5000 mod XL 31U Part no.: 905481
FMZ 5000 as 19”

Application Product features

•

•
•

•
•

Included in delivery

Not included in delivery

Note
301-410_010 / AI00_2015en

Approvals / marking

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 base unit

Fire alarm panel FMZ 5000 mod XL 40U Part no.: 905041
FMZ 5000

Application Product features

•

•
•

•
•

Included in delivery

Not included in delivery

Note
301-410_011 / AI00_2015en

Approvals / marking

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 Loop AP XP module Part no.: 906185

Functional module for use in all design variants of the
FMZ 5000. Includes 2 detector loops
for connection of up to 126 devices each. Instead of a
loop, 2 branches can be connected to the module.

modules, control modules for sounders and loop couplers

for the operation of conventional detectors in the loop.

can be connected to the loop via protocol interface and

Product features Application

• For the interface connection of analogue addressable
detectors and modules with Loop AP protocol
•
contacts or monitored via output modules.
in a single loop Interface connection of monitored zone horns via a
sounder module. For the operation of conventional
• All settings of the module, the detectors and the detectors in the loop, these are connected to a loop coupler.

• No further adjustment is required

Included in delivery
Operating voltage (module)
Quiescent current

Not included in delivery

Loop current
Loop voltage
Number of loops 2
Number of detectors per loop 126 Application in potentially explosive
2
atmospheres
Ambient temperature

no condensation
Note
Enclosure
Installation position vertical

Weight
Approvals / marking
301-420_004 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 conventional detector module Part no.: 901773

Functional module for use in all design variants of the
FMZ 5000. Includes 4 quiescent
current monitored detector lines for the connection of
conventional detectors in accordance with the applicable
national regulations. A detector event is reported via a
current increase. Each line has 4 adjustable thresholds:
quiescent current, wire breakage, short circuit, event.

range of 9 V to 20 V.
All conventional detectors in the Minimax detector range can
be used with this operating voltage range, as well as devices
from other manufactures.

Product features Application

•
virtue of the wide adjustment range of the line manual call points in standard or industrial design.
voltages and current thresholds
• All detectors can be operated with two-detector
The module is inserted into the panel without additional
• connected via plug-in connections on the module enclosure.

• No further adjustment is required

Included in delivery

in the panel
Operating voltage
Quiescent current
Not included in delivery
Line voltage
Alarm current
Note
Terminating resistor
Number of detector groups 4, quiescent current controlled or with detector of other manufactures. Manual call points
Number of detectors per line
2
Max. terminal cross-section

Ambient temperature Approvals / marking

See panels
no condensation
IP 20
Enclosure
Installation position vertical

Mounting

Dimensions
301-420_006 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product
Product Sheet
Product Sheet
Sheet Detection
|| Detecon
Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 control group module Part no.: 901673

alarm system FMZ 5000.

protection devices. The line to the devices is monitored for

wire breakage and short circuits.

verify that they are present and in proper condition.

Product features Application

• Control groups can be time-controlled with delays, For monitoring and control of e.g. valves, solenoids or horns
pulse controlled or continuously controlled
• All settings are carried out with the MxSysCon The module is inserted into the panel with separate
powersupply by power distribution module. The power
supply and system communication are connected via
• No furher adjustment work is required plug-in connections on the module enclosure.

Included in delivery
Operating voltage 21 V - 29 V DC Module completely assembled and ready for installation in
Quiescent current 25 mA DC
Number of control groups 4, quiescent current monitored
Not included in delivery
External control groups 21 V - 29 V DC
4 Socket terminal strips FKCT 2.5/3-ST 901564
Output current 1 A, continuous load
Time-controlled, continuous,
Control
pulse, inverted
Spare parts
Fuse 2 A / 125 V 784352
Max. terminal cross-section 2.5 mm2 (AWG 13)
-5 °C to +40 °C
Ambient temperature
(+23 °F to +104 °F) Note
If the module is used to sounders or extinguishing devices
Relative humidity max. 95 %
(IEC 721-3-3) no condensation
in multi-zone extinguishing systems, a separate control
group module must be used for each extinguishing zone.
IP rating (EN 60529) IP 20
Enclosure Polyamide PA6.6, green
Approvals / marking
Installation position vertical See panels
Mounting rail 35 DIN 46277,
Mounting

Weight 100 g (0.2 lbs)

17.5 x 99 x 114.5 mm (WxHxD)
Dimensions
0.7 x 3.9 x 4.5 inch (WxHxD)
301-420_007 / AI01_2016en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 8 relay module Part no.: 901595

alarm system FMZ 5000.

The module has 8 relays, each with a dry contact.
An activated relay is indicated by a red status LED.
A separate relay card with up to 8 additional relays can be
connected via a plug connector strip. Control happens via
open collector outputs parallel to the relays in the module.
This allows relays with higher switching voltages or currents
to be used.

Product features Application

• Relays are time-controlled with delays,
pulse control or continuous control graphic annunciators, ventilation system shutdown or for
• All settings are carried out with the MxSysCon general signal transfer.
The module is inserted into the panel without additional
wiring. The power supply and system communication are
• No further adjustment work is required connected via plug-in connections on the module enclosure.

Included in delivery
Operating voltage 19 V - 29 V DC Module completely assembled and ready for installation in
Quiescent current 10 mA DC
Current per relay 10 mA DC
Not included in delivery
Number of relays 8 TQ
8 socket terminal strips FKCT 2.5/3-ST 901564
Contacts per relay 1 changeover, dry Relay card 8 TQ 800843
Contact load 1 A / 30 V DC, 0.5 A / 125 V AC Relay card 8 802587
Max. switching capacity 30 W / 62.5 VA
Time-controlled, continuous, Note
Control
pulse, inverted The contacts of the relays in the module are not suitable for
Max. terminal cross-section 2.5 mm2 (AWG 13)
the switching of 230/110 V AC mains voltage

-5°C to +40 °C
Ambient temperature
(+23 °F to +104 °F) Approvals / marking
Relative humidity max. 95 % See panels
(IEC 721-3-3) no condensation
IP rating (EN 60529) IP 20
Enclosure Polyamide PA6.6, green
Installation position vertical
Mounting rail 35 DIN 46277,
Mounting

Weight 170 g (0.4 lbs)

35 x 99 x 114.5 mm (WxHxD)
Dimensions
1.4 x 3.9 x 4.5 inch (WxHxD)
301-420_008 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 MxNet module Part no.: 904877

Functional module for use in all design variants of the
FMZ 5000, as well as mimic panels and
operating panels.
Allows devices to be connected in a line-redundant loop
network. Communication with the connected devices takes
place via a serial interface in RS-232 standard.

functions of the devices are not affected.

Product features Application

• Communication to the networked devices uses The module enables a device to communicate with other
the MX2 protocol in all versions devices in a loop network. The signals from the devices
• Up to 32 devices can be networked in a ring
commands to the devices are possible from different points in
• No adjustment work is required the network and from outside the network (control stations).
Each network participant a module required.

Included in delivery

Quiescent current

Note
All parameters can be set using jumpers.
2.5 mm2 (AWG 13)

Ambient temperature

no condensation
or
Enclosure
vertical

Mounting of a ribbon cable.

Weight
Approvals / marking
See panels
301-420_014 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 Modbus module Part no.: 904566

Functional module for use in all design variants of the
FMZ 5000.
The module includes an serial interface RS422 standard
for communication using the Modbus protocol. It supports

Each slave can be assigned an address in the range of 1-99.

Product features Application

• All parameters for the transmission of data to a

• Communication to the Modbus master can be (Modbus master) via the Modbus RTU protocol.
point to point Operations such as isolations or resets are also possible
from the control station to the panel.
• Using separate converter modules connected in series,

• No adjustment work is required

A maximum of 2 Modbus modules can be used in one

Included in delivery
Operating voltage 19 V - 29 V DC
Quiescent current

Outputs COM2 RS-422 Not included in delivery

opto-isolated modular terminal
4 Socket terminal strips FKCT 2.5/4-ST 901565
Max. terminal cross-section 2.5 mm2
-5 °C to +40 °C
Ambient temperature
Note
max. 95 %
no condensation
IP rating (EN 60529) IP 20 the required range of functions and all conditions must be
Enclosure
the parties responsible for the modbus master.
Installation position vertical

Mounting -
le for Modbus communication
Weight 200 g (0.4 lbs)

Dimensions
45 x 99 x 114.5 mm (WxHxD) Approvals / marking
See panels
301-420_019 / AI01_2016en

1/2
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 SIO1 module Part no.: 903466

alarm system FMZ 5000.

Includes a serial communication channel in RS-232
standard. Preferred for data transmission to an WEBmodule,
a MxNet module or a report printer. The module status is
indicated by 3 LEDs.

Product features Application

• An RS-232-standard serial interface is connected For serial data transmission in RS-232 standard.
to an SUB-D socket When using the Minimax data protocol MX2, all signals
• Baud rates adjustable from 300 to 115.200 baud.
visualisation programs and commands can be received from
• All settings of the module, the application and the
communication parameters are carried out with

Included in delivery
Module completely assembled and ready for installation in

Operating voltage 19 V - 29 V DC Not included in delivery

Quiescent current 42 mA DC SUB-D plug, 9-pin
Outputs COM1 RS-232 SUB-D socket
Max. terminal cross-section 2.5 mm2 (AWG 13) Note
-5 °C to +40 °C The interface is not opto-isolated.
Ambient temperature
(+23 °F to +104 °F)
these must be opto-isolated using a separate converter.
Relative humidity max. 95 %
(IEC 721-3-3) no condensation
IP rating (EN 60529) IP 20 Approvals / marking
Enclosure Polyamide PA6.6, green See panels
Installation position vertical
Mounting rail 35 DIN 46277,
Mounting

Weight 100 g (0.2 lbs)

22.5 x 99 x 114.5 mm (WxHxD)
Dimensions
0.9 x 3.9 x 4.5 inch (WxHxD)
301-420_017 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire alarm and extinguishing control panels

FMZ 5000 modules/cards

FMZ 5000 SIO3 module Part no.: 903467

Functional module for use in all design variants of the
FMZ 5000.
Includes a serial communication channel in RS-232
standard plus two serial communication channels in
RS-422 / 485 standard. One RS-422 / 485 channel is
opto-isolated for interface connection with devices with an

Product features Application

• The RS-232 serial interface is connected to For serial data transmission in RS-232, RS-422 or
RS-485 standard.
When using the Minimax data protocol MX2, all signals
• The RS-422 / 485 serial interfaces (one opto-isolated)
are connected to series terminal
visualisation programs and commands can received from
•
• All settings of the module, the communication
parameters and the application are carried out with

Included in delivery

Operating voltage
Quiescent current
Not included in delivery

Outputs opto-isolated series terminal

series terminal
Max. terminal cross-section 2.5 mm2 (AWG 13)
Note
Slide switches are used to switch over from RS-422
Ambient temperature to RS-485 and to activate the bus terminating resistor.

external devices or arrange for separate opto-isolation.

no condensation The RS-485 interface cannot be used for data transfer with
MX 2 protocol.

Installation position vertical Approvals / marking

See panels
Mounting

Weight
301-420_018 / AI00_2015en

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet
Product Sheet Detection
| Detecon

Fire brigade and system accessories

Graphic panel

LMT-4 LED graphic panel Part no.: 910169

LED graphic panel in an aluminium housing with hinged

layout that can be replaced at any time, e.g.. diagram, plot

etc. The panel allows the placement of LEDs that light up the
inserted plan at desired points, plus sensor buttons which
trigger switch functions at any place in the plan by tapping
through the front plate as on a touch panel.

Product features
• For DIN A4 insert with lock
• extensive accessories and various interfaces
and connection- and distribution boards with
parallel or serial signal inputs

Included in delivery
Output voltage 24 V DC
1 LMT-4 LED graphic panel without attachment material
Housing material Aluminium
Protection class IP 54
Not included in delivery
Weight 1850 g (4.1 lbs) Red LED diodes for LMT panel 910172
359 x 272 x 46 mm (WxHxD) Green LED diodes for LMT panel 910173
Dimensions
14.13 x 10.7 x 1.8 inch (WxHxD) Yellow LED diodes for LMT panel 910174
8 LED adapter card for LMT panel 910175
Capacitive butten for LMT panel 910176
LED distribution board VK-16 910177

LMT-3 LED graphic panel Part no.: 910171

LED graphic panel in an aluminium housing with hinged

layout in between that can be replaced at any time, e.g.

diagram, plot etc. The panel allows the placement of LEDs
that light up the inserted plan at desired points, plus sensor
buttons which trigger switch functions at any place in the
plan by tapping through the front plate as on a touch panel.

Product features
• For DIN A3 insert with lock
• Extensive accessories and various interfaces
and connection- and distribution boards with
parallel or serial signal inputs

Output voltage 24 V DC Included in delivery

1 LMT-3 LED graphic panel without attachment material
Housing material Aluminium
Protection class IP 54
Not included in delivery
Weight 3050 g (6.7 lbs)
Red LED diodes for LMT panel 910172
482 x 359 x 46 mm (WxHxD) Green LED diodes for LMT panel 910173
Dimensions
19 x 14.1 x 1.8 inch (WxHxD) Yellow LED diodes for LMT panel 910174
8 LED adapter card for LMT panel 910175
302-520_001 / AI00_2015en

Capacitive butten for LMT panel 910176

LED distribution board VK-16 910177

1/1
© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
 Product Sheet DetecƟon

Inveron - Hazard Management System Page 21

© Viking GmbH & Co. KG | Industriestr. 10/12 | D-23843 Bad Oldesloe | www.viking-emea.com |
NOTE
NOTE
SINGAPORE (Asia Headquarters) INDIA
The Viking Corporation (Far East) Pte Ltd Viking Fire Products (India) Pvt. Ltd.
69 Tuas View Square No. 138 , 1st Floor, SRS Tower, 14/5,
Westlink Techpark Main Mathura Road, Near Metro Station,
Singapore 637621 Mewla, Maharajpur,
Faridabad – 121003, Haryana, India
Tel: (+65) 6278 4061
Fax: (+65) 278 4609 Tel: (+91) 129 6900 025 to 31
Email: [email protected] Email: [email protected]

CHINA JAPAN
Viking Fire Protection Equipment Trading The Viking Corporation (Japan)
(Shanghai) Co. Ltd. AIOS Gotanda Ekimae Building 4th Floor
Room 507-511, Fourth Floor, Building 1 1-11-1 Nishigotanda, Shinagawa-ku
No. 801, Zhujin Road Tokyo 141-0031,
Songjiang District, Shanghai, Japan
China 201615
Tel: (+81) 3 6303 9571
Tel: (+86) 21 5774 0775 Fax: (+81) 3 6303 9572
Fax:(+86) 21 5776 0329 Email: [email protected]
Email: [email protected]

HONG KONG KOREA

Viking Supply Network (Hong Kong) Limited Viking Korea Limited
Unit C, 6th Floor, #71 Gunpo-Ro, Gunpo - City
Gee Hing Chang Industrial Building Gyeunggi-Do
No.16 Cheung Yue Street Korea 15888
Cheung Sha Wan, Kowloon, South Korea
Hong Kong S.A.R Tel: (+82) 31 502 2510
Tel: (+852) 2391 1078 Fax: (+82) 31 438 0137
Fax: (+852) 2787 6063 Email: [email protected]
Email: [email protected]

Trusted above all.