CR 16 Water Revised June 2023
CR 16 Water Revised June 2023
CR 16 Water Revised June 2023
Version : 16/06/2023
Contact Person : Dr Gerald Renner, [email protected]
Cosmetics Europe Recommendation on
Water Resistance Labelling
Introduction
Products designed to provide extra water resistance shall be tested by adding two
further 20 minute water immersion cycles (as described in ISO16217:20201). A
product may be labelled ‘Very Water Resistant’ if it fulfils the same criteria above,
that is:
If, after two further 20 minute water immersion cycles, the value for the 90% lower
unilateral confidence limit [mean %WRR – d] is greater than or equal to 50% (using
the method described in ISO 18861:20202) AND the 95% confidence interval on the
mean static SPF is within ± 17% of the mean static SPF (as described in ISO
24444:20193).
1 ISO 16217:2020 Cosmetics — Sun protection test methods — Water immersion procedure for determining
water resistance.
2 ISO 18861:2020 Cosmetics — Sun protection test methods — Percentage of water resistance
3 ISO 24444:2019 Cosmetics - Sun protection test methods — In vivo determination of the sun protection
factor (SPF)
COSMETICS EUROPE IS THE EUROPEAN TRADE ASSOCIATION
REPRESENTING THE INTEREST OF THE COSMETICS, TOILETRY
AND PERFUMERY INDUSTRY