Service
Service
Service
Service
Service
TABLE OF CONTENTS
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
Copyright © 2013 by TPV Corporation. All rights reserved. Specifications are subject to change without notice.
No part of this publication may be reproduced in any form or means, without the prior written permission of TPV Corporation.
Otherwise we will reserve the right to investigate the legal responsibility.
1
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics might create
shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)
E2CD21NSCHAE5N
A00 Jun.17,2013 Initial release LE24A1330
E2CD21NSCHE8NN
Notes:
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
14
16
17
18
19
20
No
Check the AC input and Power “On”
the power is “ON”?
Yes
No
Power board Replace the power board
output=5.2V?
Yes
No
21
No
Power board output᧹12/16V? Replace the power board
Yes
Yes
Check the power key is under control? Replace the key board
No
Yes
No
No
Replace the Power board
22
Abnormal Display
No
Check the source Reset the source
Yes
No
No
Check the main board Replace the main board
Yes
No
Check the LVDS cable Replace the LVDS cable
Yes
No
23
No
Check TV is under control and power
Replace the main board
on/off by remote control and power key?
Yes
Yes
No
No No
24
No
No
25
Yes
Check the remote control battery is Replace the battery
not properly placed or no power?
No
Yes
No
Yes
Whether the IR board is
abnormal? Replace the IR board
No
26
No
Key board connected properly? Reconnect the key board
Yes
No
Buttons are OK? Replace the button function
Yes
No
Key board is OK? Replace the key board
Yes
No
27
28
29
30
Note: 1ǃall models of color temperature within specification, but also ensure the brightness conform to engineering
specifications.
2ǃ RGB gain value cannot exceed 138,128,138.
31
32
2
FB9908
!
BD9101 FB9906
BEAD GBL408-C BEAD
- + CN9101
4 1 1 2
! D9101 13
3
ON/OFF
! T9101 MBRF1560CT L9101 12
+ C9102A +C9101 + ! POWER X'FMR 3.5uH +5.2V C9120 DIM 11
1 2 47UF 450V NC C9102 2 1NF 10
3
+ C9101A NC C9125 9
FB9902 47UF 450V 2.2nF 630V 6 8
BEAD 7
1
FB9907 ! + + C9111 +12_16V 6
BEAD C9902 R9106 12 C9109 470UF 25V C9112 5
470PF 250V R9104 5 11 330UF 16V C9110 100N 50V 4
1 2 100K 1/4W 100K 1/4W R9115 C9107 100N 50V 3
C9103 8 47 OHM 1/4W 1NF 500V +5.2V 2
2.2nF 630V 7 1
! R9107 4
C9904 R9105 100K 1/4W 2 R9116
470PF 250V 100K 1/4W 10 47 OHM 1/4W
9 CONN
1
R9118
!
Q9101
R9120
C9108
2 AOTF8N65 100 O HM 1/4W 1NF 500V
1 N R9102
L 6.8K 1/4W
C9126
CN901 100PF
CONN
3
L9102
R9103 3.5uH +12_16V
6.8K 1/4W 2
R9110 R9111
47OHM +-5% 1/8W 10K 1/8W R9112
! 0.43 OHM +-5% 2WS D9102
1
L9901 MBRF20150CT
30MH C9122 + + C9113 C9114 C9115 + C9123
2 3 IC9101 470UF 25V 470UF 25V 100N 50V 100N 50V 470UF 25V
LD7750RGR 10*12
SG9901 SG9902 !
DSPL-501N-A21F DSPL-501N-A21F 1 8 D9105
1 4 2 OTP HV FR107
3 COMP 6
4 CS VCC 5
! ! GND OUT
+ C9105
C9104 47UF 50V
C9906 C9907
100N 50V
R9114 10*7 +12_16V +5.2V
100KOHM +-5% 1/8W
R9113
1
100PF 250V 100PF 250V 220 OHM 1/4W R9121
2
2
1K 1/8W
ZD9102 ZD9103
NR9902 C9106 GDZJ22B GDZJ5.6B
t NTCR 470P 50V
1
1
1 2
4
1
FB9901 IC9102
BEAD 056G 139 3A R9122 D9107
NR9901 ! C9124 P C123X2Y FZOF 3.3K +-5%1/8W 1N4148 D9106
1 2 22N 50V 1N4148
3
2
t NTCR C9901
2
+12_16V
2
C9905 Q9103 3.3K +-5%1/8W
! ! ! 1NF 250V ZD9101 C9117 PMBS3904
R9132 R9133 R9134 GDJ13B 470NF 50V R9125
HS1 HS3 68K 1/8W 1%
HEAT SINK HEAT SINK R9123
1
620K 620K 620K 3K3 1/8W 1%
1 1 R9124
R9130 2 2 1K OHM +-5% 1/8W C9118 R9128
2
2K 43 1/8W 1%
Q9102
2
4
! 2SD1623S-TD-E
F9901
T3.15AH 250V HS4
! SHIELD
1
3
CN9901
C9119
1 2 100N 50V R9131 1
1K 1/8W 2
T P V ( Top Victory Electronics Co . , Ltd. ) OEM MODEL Size A3
3
+5.2V
㎜䳄⬌㎚㞩 TPV MODEL Rev
SOCKET Key Component 715G5309-P0D-000-0020
01.POWER PCB NAME
〠⡩
Date Thursday , March 15, 2012 Sheet 1 of 2
34
FB9905
FB9904
L8102 BEAD D8101 1 2 VLED+
47UH SR510-22
1 2 1 2
+12_16V JUMPER
+ C8101 + C8102 + C8113
5
6
7
8
C8105 470UF 25V C81 06 47UF 100V 47UF 100V
100N 50V 1 NF R8116
D
D
D
D
Q8101 51K
AO4482L
R8115
G
S
S
S
51K 1/4W
C8107
4
3
2
1
1NF 500V
R8104 R8117
33 OHM C8111 3.6K 1% 1/8W
NC
DIM IC8501 R8118
ON/OFF PF7001S
R8101 SLP 2 1 1M 1/6W 5% SLP
1 14 VADJ R8106 2
51K 1% 1/8W 2 EN SLP 13 VBJT D8102 R8105 10K 1/8W LED1
3 DIM VADJ 12 RB160M-60TE25 +12_16V 15R 1/8W 5% 3 R8119
VFB 4 GM VBJT 11 C8112
VFB VCC 150K 1/8W 5%
VSET 5 10 1 NC
6 VSET VMOS 9 C8103 R8103
7 OVP GND 8 1uF 10 OHM 1/4W D8103
C8108 RT CS BAV99
VSET D8105
2 NC
LED3
3
R8114
8
35
8.3 IR Board
715G5671R01000004X
081G 14 24 EL
LED201
RED
4 1
033G8032 5F HR 3 2
6
R201 U201
1 15K 1/16W 1
2 R0402 2 GND
7
CONN R0603 C201
2.2UF 16V
36
37
9. Exploded View
1 PANEL
2 DECO_BEZEL
3 REAR_COVER
4 BASE
5 STAND
7 LENS_POWER
8 BKT_HOLDER
38
10. BOM List
Note: The following information of initial version BOM are only for reference of repair, not place the order as the
basis and are subject to change without notice. Please base on RSPL or Service BOM (http://cs.tpv.com.cn) , thank
you!
LE24A1330 E2CD21NSCHAE5N
Location Part No. Description Remark
052G 1185 1 BIG TAPE(Y1200141)
089G 17356C554 AUDIO CABLE 1800MM
089G202A15N IS AC POWER CORD 1500MM
092GB1JX1A3EGC BATTERY 1.5V LR03 AAA£¨LR03£© alkali
M00101 0M1G 940 6 47 H1 SCREW
M00102 0M1G1730 8120 RA SCREW 3x8
M00102 0M1G1730 8120 XL SCREW 3x8
M00103 0M1G1730 10120 HX SCREW 3x10
M00103 0M1G1730 10120 RA SCREW 3x10
0M1G1740 14225 CR3 SCREW
M00104 0Q1G 330 8 47 RA SCREW 3x8
M00104 0Q1G 330 8 47 XL SCREW 3x8
SP01 378G0035566YAH0CKD 6 OHM 3.5W L100xW27 100 NO
398GRABD7NEACR REMOTE AOC RC2414704/01 ENGLISH
705TQDSKD03001 Process box ass’y
052G 1185 MIDDLE TAPE (Y1200141)
052G 1185 MIDDLE TAPE (Y1200141)
052G 1185 MIDDLE TAPE (Y1200141)
Q45G 99606 24 ESD insulating pe bag
Q45G66010TV00500X1 PROTECT BAG
Q45G880160711100WN PROTECT BAG
Q52G1501150523AWYY TAPE_INSULATING
Q40G000162428A MKD LABEL
905TQDSKD01002000Q SKD2 ASS'Y
052G 1185 1 BIG TAPE(Y1200141)
ECN8101 095G8014 6DY01 HARNESS 6P-6P(CI1406S) 250mm
ECN8101 095G8014 6RY01 HARNESS 6P-6P(CI1406S) 250mm 2nd source
0M1G 940 6 47 CR3 SCREW 4x6
ECNA1 395G801404DY64 HARNESS 4P-B&R+B&W 40/180 2nd source
ECNA1 395G801404LY64 HARNESS 4P-B&R+B&W 40/180
ECN8 395G801410RY28 HARNESS 10P-5P 400mm
ECN21 395G801840MY14 LVDS CABLE 30P-40P 350mm
E750 750GBV236GJ2B1N000 LCD TPM236H3-HGJL02 C1B FQ TPV 2nd source
E750 750GBV236GJ2P1N000 LCD TPM236H3-HGJL02 SC1P FQ TPV
P33T04180ED01C0100 LENS_IR
P33T041900101C0100 LENS_POWER
P34T10890GM08K0130 REAR_COVER
P34T1226ADTA1L01BA DECO_BEZEL
Q11T5005 2 WIRE SADDLE
Q11T5024 1 GP WIRE-CLIP
Q15T129530300000BL BKT_HOLDER
Q40G 581689 4B SN LABEL(58x35mm)
Q40G024061517A RATING LABEL for LE24A1330/30 MKD SA
Q44GKA1461503B00HX ARTWORK CARTON LE24A1330 MKD
39
40
41
42
43
44
45