InteliLite 4

AMF 8

Order code: IL4AMF8XBAA

Controller for single gen-set applications

Datasheet
Product description
Single Gen-set controller for stand-by and prime- 5 languages in the controller & Translator functionality
power applications User Access Management
All-in-one intuitive & powerful PC tool for Cyber security improvement
configuration/monitoring/control, locally or remotely Alternative configurations
Easy to install, configure and use Multi-purpose schedulers
3 maintenance timers
Key features Modbus register mapping possibility
Stand-by and prime-power application in one unit Fuel pump management
6 binary outputs, 6 + 1 binary inputs, 3 analog inputs (U/I/R) Run Hours source selector
+5 V output reference for analog inputs Cut-out: 172 × 112 mm
2 high-current E-Stop binary outputs
1 slot for extension plug-in module (Modbus, Internet, SMS, Application overview
inputs/outputs)
Extension CAN modules
ECU support (Tier 4 Final, Stage V)
RTC with battery back-up (full calendar)
Power over USB for controller configuration
Zero power mode
True RMS measurement
In-built PLC, complemented with a PLC monitoring tool in
InteliConfig
Full remote communications support (AirGate 2.0, WSV)
Internet access using Ethernet / 4G, Modbus TCP/RTU,
SNMP v1/v2c
Active SMS and emails
Detailed history log with up to 150 records
Remote display
User setpoints and protections

| InteliLite 4 AMF 8 Datasheet | Related HW ver: 1.0 | Related SW ver: 1.0.0 | Date of issue: 1/19/2021
 Dimensions, terminals and mounting

Note: The final depth of the controller depends on the selected plug-in module – it can vary between 41 mm and
56 mm. Mind also the size of connectors and cables (e.g. in case of RS232 connector, add about 60 mm more
for standard RS232 connector and cable).

Note: The controller is to be mounted into panel doors as a standalone unit using provided holders. The
requested cutout size is 172 × 112 mm. Use the screw holders delivered with the controller to fix the controller
into the door.

InteliLite 4 AMF 8 Datasheet 2

 Technical data

Power supply E-Stop

Power supply range 8-36 VDC Dedicated terminal for safe E-Stop input.

Power consumption Physical supply for binary outputs 1 & 2.

2.5 W
(without modules) Binary inputs
RTC battery Replaceable (3 V)
Number 6
Fusing power 4 A w/o BOUT consumption
0-2 VDC close contact
10 A Close/Open indication
E-Stop fusing 6-36 VDC open contact
Max. Power Dissipation 7W
Binary outputs
Operating conditions Number 6
Protection degree (front Max. current BO1,2 = 5 A; BO3-6 = 0.5 A
IP 65
panel)
Switching to positive supply terminal
Operating temperature -20 ˚C to +70 ˚C
-30 ˚C to +80 ˚C
Analog inputs
Storage temperature
95 % non-condensing Number 3, switchable (R/U/I)
Operating humidity
(EN 60068-2-30) Range R = 0-2500 Ω; U = 0-10 V; I = 0-20 mA
5-25 Hz, ± 1.6 mm R: ±2 % from value ±5 Ω in range 0-250 Ω
Vibration
25-100 Hz, a = 4 g R: ±4 % from value in range 250 Ω-2500 Ω
Accuracy
Shocks a = 500 m/s2 U: 1 % from value ±100 mV

Surrounding air temperature rating 70 °C I: 1 % from value ±0.2 mA

Suitable for pollution degree 2
+5 V Power supply output
D+ Max. current 45 mA
Max. output current 250 mA
Magnetic pickup
Charging fail threshold 80 % of Usupply
4 Vpk-pk to 50 Vpk-pk in range 4 Hz to 1
Voltage measurement kHz
Voltage input
Measurement inputs 3ph-n Gen voltage , 3ph-n Mains 6 Vpk-pk to 50 Vpk-pk in range 1 to 5 kHz
range
10-277 V AC / 10-480 V AC (EU) 10 Vpk-pk to 50 Vpk-pk in range 5 to 10
kHz
Measurement range 10-346 V AC / 10-600 V AC
(US/Canada) Frequency
4 Hz to 10 kHz
input range
Linear measurement 350 V AC Ph-N
and protection range 660 V AC Ph-Ph Frequency
measurement 0.2 % from measured value
Accuracy 1%
tolerance
Frequency range 30-70 Hz (accuracy 0.1 Hz)

Input impedance 0.72 MΩ ph-ph , 0.36 MΩ ph-n

Display
Type Build-in monochromatic 3.2"

Resolution 132 × 64 px

Communications
USB Device Non-isolated type B connector
Non-isolated, 250 / 50 kbps,
CAN 1
Terminator impedance 120 Ω

Current measurement
Measurement inputs 3ph Gen current

Measurement range 5A

Max. allowed current 10 A

Accuracy ±20 mA for 0-2 A; 1 % of value for 2-5 A

Input impedance <0.1 Ω

InteliLite 4 AMF 8 Datasheet 3

 Available plug-in modules
Product Description Order code

CM-RS232-485 Dual port interface CM223248XBX

CM2-4G-GPS 4G & GPS plug-in communication module CM24GGPSXBX
CM3-Ethernet Internet / Ethernet plug-in communication module CM3ETHERXBX
EM-BIO8-EFCP 8 additional binary inputs/outputs EM2BIO8EXBX

Note: Controller has 1 slot for plug-in modules.

Available CAN modules

Product Description Order code

IGL-RA15 CAN remote annunciator with 15 LEDs EM2IGLRABAA

Inteli AIN8 CAN module with 8 analog inputs I-AIN8
Inteli IO8/8 CAN module with 8 binary inputs and 8 binary outputs I-IO8/8
IGS-PTM CAN module with 8 binary inputs, 8 binary outputs, 4 analog inputs and 1 analog output IGS-PTM
Inteli AIN8TC CAN module with 8 analog inputs dedicated for thermocouple sensors only. I-AIN8TC
Inteli AIO9/1 CAN module with analog inputs and outputs – designed for DC measurement. I-AIO9/1

Functions and protections

Support of functions and protections as defined by ANSI (American National Standards Institute):

Description ANSI code Description ANSI code

Master unit 1 Overcurrent 50/50TD
Stopping device 5 Overcurrent IDMT 51
Underspeed 14 AC circuit breaker 52
Starting-to-running transition contractor 19 Overvoltage 59
Thermal relay 26 Pressure switch 63
Undervoltage 27 Liquid level switch 71
Annunciator 30 Alarm relay*** 74
Overload(real power) 32P Reclosing relay 79
Master sequence device 34 Auto selective control/transfer 83
Incomplete sequence relay 48

*** extension module IGL-RA15 required

Certifications and standards

EN 61000-6-2 EN 60068-2-6 (2÷25 Hz / ±1,6 mm; 25÷100 Hz / 4.0 g)
2
EN 61000-6-4 EN 60068-2-27 (a=500 m/s ; T=6 ms)
EN 61010-1 EN 60068-2-30:2005 25/55°C, RH 95%, 48hours
EN 60068-2-1 (-20 °C/16 h) EN 60529 (front panel IP65, back side IP20)
EN 60068-2-2 (70 °C/16 h)

Manufacturer:
ComAp a.s.
Czech Republic E-mail: [email protected]
Phone: +420 246 012 111 Web: www.comap-control.com

© ComAp. Features and specification are subject to change without prior notice.