Scribd
Upload
45 views2 pages

Sensor Balluf Bes0356

This document provides specifications for an inductive sensor. The sensor has a sensing range of 1.5mm, operates from 10-30VDC, has an IP67 rating, PNP normally open output, and stainless steel housing. It is designed for flush mounting, has short circuit and overload protection, and can operate in temperatures from -25 to 70 degrees Celsius.

Uploaded by

Almir Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views2 pages

Sensor Balluf Bes0356

This document provides specifications for an inductive sensor. The sensor has a sensing range of 1.5mm, operates from 10-30VDC, has an IP67 rating, PNP normally open output, and stainless steel housing. It is designed for flush mounting, has short circuit and overload protection, and can operate in temperatures from -25 to 70 degrees Celsius.

Uploaded by

Almir Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Inductive Sensors

BES 516-324-SA56-E5-C-S49
Order Code: BES0356

Display/Operation Environmental conditions


Function indicator yes Ambient temperature -25...70 °C
Power indicator no Contamination scale 3
EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms

Electrical connection EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min


IP rating IP67
Connection M8x1-Male, 3-pin
Polarity reversal protected yes
Protection against device mix-ups yes
Functional safety
Short-circuit protection yes MTTF (40 °C) 1120 a

Electrical data General data


Load capacitance max. at Ue 1 µF Approval/Conformity cULus
Min. operating current Im 0 mA CE
No-load current Io max., damped 10 mA EAC
WEEE
No-load current Io max., undamped 2 mA
Basic standard IEC 60947-5-2
Operating voltage Ub 10...30 VDC
Output resistance Ra 15.0 kOhm + LED
Rated insulation voltage Ui 75 V DC Material
Rated operating current Ie 200 mA Housing material Stainless steel
Rated operating voltage Ue DC 24 V Material sensing surface PA 12
Rated short circuit current 100 A
Ready delay tv max. 10 ms
Mechanical data
Residual current Ir max. 80 µA
Ripple max. (% of Ue) 15 % Dimension Ø 8 x 32.5 mm

Switching frequency 1000 Hz Installation for flush mounting

Utilization category DC -13 Size M8x1

Voltage drop static max. 1.5 V Tightening torque 5 Nm

Output/Interface
Switching output PNP normally open (NO)

1/2
Internet www.balluff.com eCl@ss 9.1: 27-27-01-01
Subject to change without notice: 156540 ETIM 6.0: EC002714
BES0356_0.35_2020-03-05
Inductive Sensors
BES 516-324-SA56-E5-C-S49
Order Code: BES0356
Range/Distance Real switching distance sr 1.5 mm
Repeat accuracy max. (% of Sr) 5.0 %
Assured operating distance Sa 1.2 mm
Temperature drift max. (% of Sr) 10 %
Hysteresis H max. (% of Sr) 15.0 %
Tolerance Sr ±10 %
Rated operating distance Sn 1.5 mm

Remarks
EMC: Surge resistance
External protection circuit is required. Document 825345, Section 2.
The sensor is functional again after the overload has been eliminated.
For further information about the MTTF and B10d see MTTF / B10d certificate

Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with
no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.

Connector Drawings

Wiring Diagrams

2/2
Internet www.balluff.com eCl@ss 9.1: 27-27-01-01
Subject to change without notice: 156540 ETIM 6.0: EC002714
BES0356_0.35_2020-03-05

You might also like