THE BRAND YOU CAN TRUST

®
FIBON
Advance Composites

Catalogue 2.3
BUSBAR SUPPORT
 Content
A Introduction
Introduction A1
Technical & Certification A2
FIBON technology A3
FIBON busbar support A4

B Semi Finished Material

Overview B1
Flatbar B2
Sheet form B3

C Main Busbar Vertical Support

Overview C1
Vertical fixed support C2
Vertical adjustable support C6
Vertical compact support C8
Vertical flat support C10

D Main Busbar Horizontal Support

Overview D1
Horizontal fixed support D2
Horizontal compact support D5

E Distribution Busbar Support

Overview E1
Drawer busbar support E2
Load centre support E4
Breaker Protection Support E5
LowAmp Distribution Suppport E6

F Special Insulator
Overview F1
Neutral link base F2
Current transformer clamp F3
Composite separator F5
Dough/Sheet Moulding Compound F7
Insulation Tube F9

I Appendix
Notes I1
FIBON Insulator
Introduction

ADVANCED COMPOSITE FORMULATOR

Hexa Analisa is a wholly owned subsidiary of Fibon Berhad, a

Public Listed Company listed on the Capital Market of Bursa
Malaysia Securities Berhad.

Hexa Analisa specializes in the formulation & manufacture of

Advanced Polymer Matrix Fibre (APMF) Composites that could
be used in electrical, electronic, military and medical industries.

Through its extensive Research and Development, Hexa Analisa

has successfully formulated a comprehensive range of APMF
Composites since 2003 including the world renowned FIBON
range of electrical insulation products.
FIBON ELECTRICAL COMPOSITES
These insulation product are fabricated into various design, with
consideration of every aspect of the electrical insulation to meet
the international standard requirements. Fibon Electrical Insulation Composites (EIC) are made of
innovative and specially formulated glass fibre reinforced
polymer material. It is designed for the desire of the needs for
high insulation property with high flexural, and tensile strength
and yet low in water absorption, which generally comply with
the test under IEC 60439, IEC 61439 and capable of withstanding
explosions.

Apart from having an excellent insulation characteristic, Fibon

composites also exhibit excellent chemical resistant which
enable the material to be used in offshore and chemical plants.

Fibon provide reliable, safe & full type-tested busbar supports

for the low voltage, medium voltage & high voltage switchboards
and switchgears.

FB 2040, GP 600, G10, G11, KP 680, P 1800, D 700 are some of

the composites commonly used in the electrical industry.

Fibon materials are available in sheet form (0.8-5mm) as well as

in stripes of 2.29m of various thickness and width. Fibon offers
comprehensive range of busbar support designs such as VFS,
VAS, VCS, VFTS, HFS, HCS, and etc.

Fibon offers assistance for testing arrangement, which include

organizing accommodation and transportation to our customer.
With the facilities at Fibon UK and Fibon Australia, technical
supports and backup facilities for urgent fabrication during the
type test of equipments are available upon request.

A1
www.fibon.co.uk
FIBON Insulator
Technical & Certification

PROPERTIES MODIFICATION These tests are conducted to verify compliance of the desire
requirements of the standards:-
FIBON with its innovative technology has developed a new
composite material which overcomes the deficiencies of 1. Verification of temperature rise
traditional materials when used in applications with critical and 2. Short circuit withstand test
demanding environments. 3. Power frequency withstand voltage
4. Impulse voltage withstand test
5. Degree of protection
FIBON has the capability & experience to provide services to 6. Mechanical operation
modify the properties of the material such as mechanical, 7. Protection provided by barriers
electrical, chemical resistance, thermal and flame retardant. 8. Cross-section area of neutral

For the past 15 years, FIBON R&D lab specialists has done Additional Test:
extensive research and modified the properties of the composite
material to suit various application requirements.
1. Resistance to corrosion test
2. Verification of thermal stability
3. Verification of resistance of insulating materials to heat
(Ball Pressure Test)
4. Resistance to abnormal heat & fire (Glow Wire Test
5. Resistance to UV radiation
6. Lifting
7. Mechanical impact test
8. Marking

FIBON EIC have been tested and certified through a series of full
type tests ranging from 200A to 6000A meeting the requirements
of IEC 60439 and IEC 61439.

Fibon Composite material had withstood 100kA for the duration

of 3 second in the short circuit explosion test.

IEC 60439 & IEC 61439

In the modern and fast-phased world, requirements are getting

higher in the electrical industry.

FIBON Electrical Insulation Composites (EIC) meet and comply

with the stringent safety requirements set for the electrical
equipment manufacturers by the relevant government
authorities & consultants.

IEC 60439 and its superseded standard IEC 61439, are the
foremost international standards need to be fulfilled by the
electrical equipments manufacturer.

FIBON EIC, namely FB2040 and GP600 have superior properties

and conform to both the IEC 60439 and IEC 61439 standards.

Testing has been carried out by Independent third party laboratories in several countries as follows
[ PSB Corporation Singapore ] [ IPH Germany ] [ CPRI India ] [ TCA Australia ]

A2
www.fibon.co.uk
FIBON Insulator
FIBON Technology

Extensive research has been done and continuously carried out on insulation resins and reinforced materials to determine the suitability of
the formulation and optimise the performance of insulation compounds. Knowledge obtained from the research formed the base to develop
insulation materials for specific applications.

A series of FIBON busbar supports were designed and developed to provide “full” protection for the entire busbar system. The design of FIBON
busbar supports comply with the stringent safety requirements of IEC 60439 & IEC 61439 standards. Acceptance & use of FIBON busbar supports in
many mega projects shows the trust and recognition on FIBON’s quality and reliability!

Different
Assembly Lab Test Project Reference
Materials

A3
www.fibon.co.uk
FIBON Insulator
FIBON Busbar Support

FIBON busbar supports have been designed to secure various sections of the busbar system, such as horizontal and vertical copper busbars, dropper
busbars, outgoing and incoming busbars, neutral busbars, bus duct systems, etc.

Due to the special properties of Fibon’s material, it can undergo various process of machining and be shaped to different profiles for many
applications. This flexibility enables fabrication of unique designs even in small quantities.

Kindly contact us for further information on the various available designs.

FB VFM SS DS TS QS AVM VFMD VFMH AHM VFMC VFMT CT

VFMS

A4
www.fibon.co.uk
Overview
Semi Finished Product

FlatBar
FB

Pg. B 2

Sheet Form
SW, SG, BK, PC

Pg. B 3

B1
www.fibon.co.uk
FIBON Insulator
FlatBar

FB
Fibon FlatBar is electrical insulation material that is provided in strip form for the convenience of non standard and
emergency usage. Ease of drilling and cutting simplifies the fabrication process and leads to cost efficiency.

THICKNESS WIDTH LENGTH THICKNESS WIDTH LENGTH

ITEM CODE ITEM CODE
(T) (W) (L) (T) (W) (L)

FB 1212 12 12 2290 FB 2075 20 75 2290

FB 1215 12 15 2290 FB 20100 20 100 2290

FB 1225 12 25 2290 FB 2532 25 32 2290

FB 1232 12 32 2290 FB 2540 25 40 2290

FB 1240 12 40 2290 FB 2550 25 50 2290

FB 1250 12 50 2290 FB 2565 25 65 2290

FB 1265 12 65 2290 FB 2575 25 75 2290

FB 1275 12 75 2290 FB 25100 25 100 2290

FB 12100 12 100 2290 FB 3030 30 30 2290

FB 1515 15 15 2290 FB 3035 30 35 2290

FB 1525 15 25 2290 FB 3040 30 40 2290

FB 1540 15 40 2290 FB 3050 30 50 2290

FB 1550 15 50 2290 FB 3065 30 65 2290

FB 1565 15 65 2290 FB 3075 30 75 2290

FB 1575 15 75 2290 FB 30100 30 100 2290

FB 15100 15 100 2290 FB 3535 35 35 2290

FB 2025 20 25 2290 FB 3540 35 40 2290

FB 2032 20 32 2290 FB 3550 35 50 2290

FB 2040 20 40 2290 FB 3565 35 65 2290

FB 2050 20 50 2290 FB 3575 35 75 2290

FB 2065 20 65 2290 FB 35100 35 100 2290

B2
www.fibon.co.uk
FIBON Insulator
Sheet Form

SW, SG, BK, PC

Fibon Sheet Form is manufactured using high-pressure hot press techniques and is characterized by high mechanical
strength with outstanding electrical as well as thermal properties. The unique formulation has been designed to
enable the materials to be suitable for drilling, cutting and especially punching with high speed turret machine .

THICKNESS WIDTH LENGTH THICKNESS WIDTH LENGTH

ITEM CODE ITEM CODE
(T) (W) (L) (T) (W) (L)

SW212 2 1110 2340 BK1.6 1.6 980 1980

SW312 3 1110 2340 BK3 3 980 1980

SW512 5 1110 2340 BK4.5 4.5 980 1980

SW211 2 1110 1110 BK6 6 1220 2440

SW311 3 1110 1110 BK10 10 1220 2440

SW511 5 1110 1110 BK12.7 12.7 1220 2440

SG212 2 1110 2340 PC1 1 1220 2440

SG312 3 1110 2340 PC2 2 1220 2440

SG512 5 1110 2340 PC3 3 1220 2440

SG211 2 1110 1110 PC5 5 1220 2440

SG311 3 1110 1110

SG511 5 1110 1110

B3
www.fibon.co.uk
Semi Finished Product
Overview
Main Busbar Vertical Support

Vertical Fixed Support

VFS 1P VFS 2P VFS 3P VFS 4P

Pg. C 2 Pg. C 3 Pg. C 4 Pg. C 5

Vertical Adjustable Support

VASV VASP

Pg. C 6 Pg. C 7

Vertical Compact Support

VCSC VCSH VCSL VCSE

Pg. C 8 Pg. C 8 Pg. C 9 Pg. C 9

Vertical Flat Support

VFTSF VFTSS

Pg. C 10 Pg. C 11

C1
www.fibon.co.uk
FIBON Insulator
Vertical Fixed Support ( 1 Pole )

VFS1P
Fibon VFS has been ASTA Tested and Certified from 36kA to 100kA for the duration of withstand current of 1 sec &
3 sec. There are 4 models of Vertical Fixed (VFS) Busbar Supports available and designed in 1 pole, 2 poles, 3 poles &
4 poles.

COUNTER
SLOT SLOT SLOT HOLE TO HOLE NO. OF
NO. OF THICKNESS WIDTH LENGTH BUSBAR BUSBAR SUNK (CH) /
ITEM CODE QTY WIDTH DEPTH HOLE DIAMETER HOLE
POLE (T) (W) (L) THICKNESS HEIGHT THROUGH
/POLE (S) (E) (HH) (J) (K)
HOLE (TH)

30,40,50,
VFS1PS073 1 20 40 124 1 7 8 6-6.5 60,80,100, 100 TH 9 2
120,150,160
40,50,
VFS1PD073 1 20 40 124 2 7 8 6-6.5 60,80, 100 TH 9 2
100,120,150

50,60,
VFS1PT073 1 20 40 124 3 7 8 6-6.5 100 TH 9 2
80,100,120

80,100,
VFS1PS113 1 20 40 124 1 11 10 9.5-10 100 TH 9 2
120,150,160

50, 60,
VFS1PD112 1 20 40 124 2 11 10 9.5-10 100 TH/CH 9 2
80, 100, 120

50,60,
VFS1PD113 1 30 50 124 2 11 10 9.5-10 100 TH/CH 9 2
80,100,120

80,100,
VFS1PT113 1 25 40 124 3 11 10 9.5-10 100 TH/CH 9 2
120,150

80, 100, 120,

VFS1PT114 1 30 45 130 3 11 10 9.5-10 98 TH/CH 9 2
150, 160, 200

80,100,120,
VFS1PT115 1 30 45 160 3 11 10 9.5-10 124 TH/CH 9 2
150,160, 200

80, 100, 120,

VFS1PS133 1 25 40 160 1 13.5 12 9.5-10 124 TH/CH 9 2
150, 160, 200

80, 100, 120,

VFS1PD133 1 30 45 160 2 13.5 12 9.5-10 124 TH/CH 9 2
150, 160, 200

80,100,120,
VFS1PT133 1 30 40 135 3 13.5 10 9.5-10 110 TH/CH 9 2
150,160, 200

80, 100, 120,

VFS1PT135 1 30 45 160 3 13.5 12 9.5-10 124 TH/CH 9 2
150, 160, 200

• VFS1PS073CH for counter sunk (CH)

• VFS1PS073TH for through hole (TH)

C2
www.fibon.co.uk
FIBON Insulator
Vertical Fixed Support ( 2 Poles)

VFS2P
Fibon VFS has been ASTA Tested and Certified from 36kA to 100kA for the duration of withstand current of 1 sec &
3 sec. There are 4 models of Vertical Fixed (VFS) Busbar Supports available and designed in 1 pole, 2 poles, 3 poles &
4 poles.

THICK- INTER- SLOT SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE
ITEM NO. OF WIDTH LENGTH BUSBAR
NESS PHASE QTY WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
CODE POLE (W) (L) HEIGHT
(T) (P) /POLE (S) (E) (HH) HOLE (TH) (J) (K)

40, 50, 60,

VFS2PQ053 2 20 40 220 100 4 5.5 8 190 TH 9 3
75, 80, 100, 120

40, 50, 60,

VFS2PD075 2 20 40 180 75 2 7 8 150 TH 9 2
75, 80, 100
40, 50, 60,
VFS2PT073 2 20 40 225 100 3 7 8 195 TH 9 3
75, 80, 100, 120

40, 60, 75,

VFS2PS115 2 25 40 210 80 1 11 10 180 TH 9 3
100,120
40, 60, 75,
VFS2PD112 2 25 40 210 90 2 11 10 180 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD113 2 25 40 225 100 2 11 10 195 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD114 2 25 40 230 101 2 11 10 200 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD115 2 30 50 246 102 2 11 10 216 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD116 2 25 40 250 110 2 11 10 220 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD117 2 25 40 260 120 2 11 10 230 TH 9 3
100,120, 150
40, 60, 75,
VFS2PD118 2 25 45 300 130 2 11 10 270 TH 9 3
100,120, 150
100, 120, 150,
VFS2PT113 2 30 45 322 131 3 11 10 288 TH 9 3
160,200

100, 120, 150,

VFS2PS133 2 25 40 280 110 1 13.5 12 244 TH 9 3
160, 200
100, 120, 150,
VFS2PD133 2 30 45 260 120 2 13.5 12 230 TH 9 3
160, 200
100, 120, 150,
VFS2PT133 2 30 50 330 135 3 13.5 12 300 TH 9 3
160, 200

C3
www.fibon.co.uk
FIBON Insulator
Vertical Fixed Support ( 3 Poles )

VFS3P
Fibon VFS has been ASTA Tested and Certified from 36kA to 100kA for the duration of withstand current of 1 sec &
3 sec. There are 4 models of Vertical Fixed (VFS) Busbar Supports available and designed in 1 pole, 2 poles, 3 poles &
4 poles.

THICK- INTER- SLOT SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE
ITEM NO. OF WIDTH LENGTH BUSBAR
NESS PHASE QTY WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
CODE POLE (W) (L) HEIGHT
(T) (P) /POLE (S) (E) (HH) HOLE (TH) (J) (K)

40, 50, 60,

VFS3PD053 3 20 35 230 65 2 5.5 8 200 TH 9 4
75, 80, 100
40, 50, 60,
VFS3PQ053 3 20 35 320 100 4 5.5 8 290 TH 9 4
75, 80, 100, 120

40, 50, 60,

VFS3PS073 3 20 40 250 65 1 7 8 220 TH 9 4
75, 80, 100
40, 50, 60,
VFS3PD073 3 20 40 250 65 2 7 8 220 TH 9 2
75, 80, 100
40, 50, 60,
VFS3PD075 3 20 40 330 100 2 7 8 300 TH 9 4
75, 80, 100
40, 50, 60,
VFS3PT073 3 20 40 330 100 3 7 8 300 TH 9 4
75, 80, 100

40, 60, 75,

VFS3PS113 3 20 40 330 100 1 11 10 300 TH 9 4
100, 120, 150
40, 60, 75,
VFS3PD112 3 20 40 270 100 2 11 10 100 TH 9 2
100, 120, 150
40, 60, 75,
VFS3PD113 3 25 40 325 100 2 11 10 295 TH 9 4
100, 120, 150
40, 60, 75,
VFS3PD114 3 25 40 390 120 2 11 10 360 TH 9 4
100, 120, 150
40, 60, 75,
VFS3PD115 3 30 50 348 102 2 11 10 318 TH 9 4
100, 120, 150
100,120,
VFS3PT113 3 25 40 390 120 3 11 10 360 TH 9 4
150, 160, 200
100, 120,
VFS3PT115 3 30 45 453 131 3 11 10 419 TH 9 4
150, 160, 200

100, 120,
VFS3PS133 3 20 40 330 100 1 13.5 12 300 TH 9 4
150, 160, 200
100, 120,
VFS3PD133 3 25 40 330 100 2 13.5 12 300 TH 9 4
150, 160, 200
100, 120,
VFS3PD135 3 25 40 390 120 2 13.5 12 360 TH 9 4
150, 160, 200

C4
www.fibon.co.uk
FIBON Insulator
Vertical Fixed Support ( 4 Poles )

VFS4P
Fibon VFS has been ASTA Tested and Certified from 36kA to 100kA for the duration of withstand current of 1 sec &
3 sec. There are 4 models of Vertical Fixed (VFS) Busbar Supports available and designed in 1 pole, 2 poles, 3 poles &
4 poles.

THICK- INTER- SLOT SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE
ITEM NO. OF WIDTH LENGTH BUSBAR
NESS PHASE QTY WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
CODE POLE (W) (L) HEIGHT
(T) (P) /POLE (S) (E) (HH) HOLE (TH) (J) (K)

40, 50, 60,

VFS4PS053 4 20 40 285 65 1 5.5 8 255 TH/CH 9 3
75, 80, 100

40, 50, 60,

VFS4PD055 4 20 40 300 65 2 5.5 8 270 TH/CH 9 3
75, 80, 100, 120

40, 50, 60,

VFS4PT053 4 25 40 420 100 3 5.5 8 390 TH/CH 9 5
75, 80, 100, 120

40, 50, 60,

VFS4PQ055 4 30 40 460 100 4 5.5 8 424 TH/CH 9 5
75, 80, 100, 120

40, 50, 60,

VFS4PF058 4 30 40 520 125 5 5.5 8 484 TH/CH 9 5
75, 80, 100, 120

40, 50, 60,

VFS4PS075 4 20 40 285 65 1 7 8 255 TH/CH 9 5
75, 80, 100

40, 50, 60,

VFS4PD073 4 20 40 285 65 2 7 8 255 TH/CH 9 5
75, 80, 100

40, 50, 60,

VFS4PD075 4 20 40 330 75 2 7 8 300 TH/CH 9 5
75, 80, 100

40, 60, 75,

VFS4PT075 4 25 40 425 100 3 7 8 395 TH/CH 9 5
100,120

40, 60, 75,

VFS4PQ071 4 30 40 470 105 4 7 8 434 TH/CH 9 5
100,120

40, 60, 75,

VFS4PQ073 4 30 40 530 125 4 7 8 494 TH/CH 9 5
100,120, 150

40, 60, 75,

VFS4PF073 4 30 40 530 125 5 7 8 494 TH/CH 9 5
100,120, 150

40, 60, 75,

VFS4PS112 4 25 40 350 75 1 11 10 320 TH/CH 9 5
100,120, 150

40, 60, 75,

VFS4PD113 4 25 40 425 100 2 11 10 395 TH/CH 9 5
100,120, 150

100, 120, 150,

VFS4PT113 4 30 45 584 131 3 11 10 550 TH/CH 9 5
160, 200

C5
www.fibon.co.uk
FIBON Insulator
Vertical Adjustable Support – V series

VASV
Fibon VAS is purpose designed to provide flexible distance between phases, especially the Incoming and Outgoing
copper busbar of the switchboard. The VAS has two series namely V series and P series for different busbar system
and needs.

THICKNESS WIDTH LENGTH BUSBAR BUSBAR HOLE TO HOLE COUNTER SUNK (CH) / HOLE DIAMETER HOLE QTY
ITEM CODE
(T) (W) (L) THICKNESS HEIGHT (HH) THROUGH HOLE (TH) (J) (K)

VASV10S 30 20 135 10 75 112.5 TH 10.5 2

VASV12S 30 20 160 10 100 137.5 TH 10.5 2

VASV14S 30 20 180 10 120 157.5 TH 10.5 2

VASV16S 30 20 210 10 150 187.5 TH 10.5 2

VASV18S 30 20 220 10 160 197.5 TH 10.5 2

VASV_S

THICKNESS WIDTH LENGTH BUSBAR BUSBAR HOLE TO HOLE COUNTER SUNK (CH) / HOLE DIAMETER HOLE QTY
ITEM CODE
(T) (W) (L) THICKNESS HEIGHT (HH) THROUGH HOLE (TH) (J) (K)

VASV10A 30 30 135 - 75 112.5 TH 10.5 2

VASV10B 30 40 135 - 75 112.5 TH 10.5 2

VASV_A & VASV_B VASV12A 30 30 160 - 100 137.5 TH 10.5 2

VASV12B 30 40 160 - 100 137.5 TH 10.5 2

VASV14A 30 30 180 - 120 157.5 TH 10.5 2

VASV14B 30 40 180 - 120 157.5 TH 10.5 2

VASV16A 30 30 210 - 150 187.5 TH 10.5 2

VASV16B 30 40 210 - 150 187.5 TH 10.5 2

VASV18A 30 30 220 - 160 197.5 TH 10.5 2

VASV18B 30 40 220 - 160 197.5 TH 10.5 2

C6
www.fibon.co.uk
FIBON Insulator
Vertical Adjustable Support – P series

VASP
Fibon VAS is purpose designed to provide flexible distance between phases, especially the Incoming and Outgoing
copper busbar of the switchboard. The VAS has two series namely V series and P series for different busbar system
and needs.

COUNTER
SLOT SLOT SLOT HOLE
THICKNESS WIDTH LENGTH SUNK (CH) / HOLE QTY
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER
(T) (W) (L) THROUGH (K)
/POLE (S) (M) (J)
HOLE (TH)

VASP1010 12 85 167 1 10.5 75.5 45.75 37.25 TH 7 4

VASP1012 12 85 192 1 10.5 100.5 45.75 37.25 TH 7 4

VSAP10
COUNTER
SLOT SLOT SLOT HOLE
THICKNESS WIDTH LENGTH SUNK (CH) / HOLE QTY
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER
(T) (W) (L) THROUGH (K)
/POLE (S) (M) (J)
HOLE (TH)

VASP2010 12 85 152 2 10.5 60.5 45.75 27.5 TH 7 4

VASP2012 12 85 167 2 10.5 75.5 45.75 27.5 TH 7 4

VASP2014 12 105 192 2 10.5 100.5 45.75 37.5 TH 7 4

VASP2016 15 105 212 2 10.5 120.5 45.75 37.5 TH 7 4

VSAP20

COUNTER
SLOT SLOT SLOT HOLE
THICKNESS WIDTH LENGTH SUNK (CH) / HOLE QTY
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER
(T) (W) (L) THROUGH (K)
/POLE (S) (M) (J)
HOLE (TH)

VASP3010 15 125 212 3 10.5 120.5 45.75 37.75 TH 7 4

VASP3012 15 125 242 3 10.5 150.5 45.75 37.75 TH 7 4

VASP3014 15 125 252 3 10.5 160.5 45.75 37.75 TH 7 4

VSAP30

C7
www.fibon.co.uk
FIBON Insulator
Vertical Compact Support – C series, H series

VCSC, VCSH
Fibon offers a series of compact busbar support for various switchboard amperages and applications. The copper
busbar is fully secured by high mechanical strength Fibon Vertical Compact Support (VCS) makes easy seal or
separation for each column of copper compartment.

SLOT SLOT SLOT HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER QTY
POLE (T) (W) (L) (P)
/POLE (S) (M) (J) (K)

VCSC3PD113 3 15 270 260 70 2 10.5 100.5 45 7 4

VCSC3PT113 3 15 270 320 90 3 10.5 100.5 45.25 7 4

VCSC3P SLOT SLOT SLOT HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER QTY
POLE (T) (W) (L) (P)
/POLE (S) (M) (J) (K)

VCSC4PD113 4 15 270 330 70 2 11 101 45 7 4

VCSC4PT113 4 15 270 410 90 3 11 101 45.25 7 4

VCSC4PQ113 4 15 270 490 110 4 11 101 45.5 7 4

VCSC4P

SLOT SLOT SLOT HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER QTY
POLE (T) (W) (L) (P)
/POLE (S) (M) (J) (K)

VCSH4PD113 4 15 250 220 100 2 10.5 80.5 29.5 45 7 4

VCSH4PD115 4 15 290 220 100 2 10.5 100.5 29.5 45 7 4

VCSH4PD117 4 15 330 250 130 2 10.5 120.5 29.5 45 7 4

VCSH4PD119 4 15 410 250 130 2 10.5 160.5 29.5 45 7 4

C8
www.fibon.co.uk
FIBON Insulator
Vertical Compact Support – L series, E series

VCSL, VCSE
Fibon offers a series of compact busbar support for various switchboard amperages and applications. The copper
busbar is fully secured by high mechanical strength Fibon Vertical Compact Support (VCS) makes easy seal or
separation for each column of copper compartment.

SLOT SLOT SLOT HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE
ITEM CODE QTY WIDTH HEIGHT C D DIAMETER QTY
POLE (T) (W) (L) (P)
/POLE (S) (M) (J) (K)

VCSL4PD113 4 15 135 420 65 2 10.5 80.5 27.25 97.5 7 4

VCSL4PD115 4 15 170 420 100 2 10.5 100.5 34.75 45 7 4

VCSL4PD117 4 15 190 500 130 2 10.5 120.5 34.75 40 7 4

VCSL4PD119 4 15 230 500 130 2 10.5 160.5 34.75 40 7 4

SLOT SLOT SLOT HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE
ITEM CODE QTY WIDTH DEPTH C D DIAMETER QTY
POLE (T) (W) (L) (P)
/POLE (S) (E) (J) (K)

VCSE4PD113 4 15 75 425 100 2 10.5 40.5 34.5 47.5 7 2

VCSE4PD115 4 15 85 425 100 2 10.5 50.5 34.5 47.5 7 2

VCSE4PD117 4 15 95 500 130 2 10.5 60.5 34.5 40 7 2

C9
www.fibon.co.uk
FIBON Insulator
Vertical Flat Support

VFTSF
Fibon VFTS is one of the simple design for vertical fix main busbar support. The VFTS support comes in two simple
types, VFTSS is designed with slots to receive the copper busbars and VFTSF is designed complete with metal brackets
for clamp the copper busbar.

HOLE
THICK- INTER- BUSBAR HOLE HOLE HOLE HOLE
NO. OF WIDTH LENGTH BUSBAR TO
ITEM CODE NESS PHASE (A) (B) THICK- DIAMETER QTY DIAMETER QTY
POLE (W) (L) HEIGHT HOLE
(T) (P) NESS (J1) (K1) (J2) (K2)
(HH)

VFTSF10A 4 20 40 392 75 72 95 10 40, 50, 60, 75 362 8.5 4 7 4

40, 50,
VFTSF12A 4 20 40 592 75 72 295 10 562 8.5 4 7 4
60, 75, 80
40, 50,
VFTSF14A 4 25 50 592 75 72 295 10 562 8.5 4 7 4
60, 75, 80
40, 50, 60,
VFTSF16A 4 25 50 592 100 72 220 10 562 10.5 4 7 4
75, 80, 100
40, 50, 60,
VFTSF18A 4 25 75 792 75 72 495 10 762 10.5 4 7 4
80, 100, 120
40, 50, 60,
VFTSF20A 4 25 75 792 100 72 420 10 762 10.5 4 7 4
80, 100, 120
40, 60, 80,
VFTSF22A 4 30 100 992 100 72 620 10 962 10.5 4 7 4
100, 120, 160
40, 60, 80,
VFTSF24A 4 30 100 1102 120 72 670 10 1065 10.5 4 7 4
100, 120, 160

HOLE
THICK- INTER- BUSBAR HOLE HOLE HOLE HOLE
NO. OF WIDTH LENGTH Busbar TO
ITEM CODE NESS PHASE (A) (B) THICK- DIAMETER QTY DIAMETER QTY
POLE (W) (L) Height HOLE
(T) (P) NESS (J1) (K1) (J2) (K2)
(HH)

VFTSF10B 4 20 40 392 75 72 95 10 40, 50, 60, 75 362 8.5 4 7 4

40, 50,
VFTSF12B 4 20 40 592 75 72 295 10 562 8.5 4 7 4
60, 75, 80
40, 50,
VFTSF14B 4 25 50 592 75 72 295 10 562 8.5 4 7 4
60, 75, 80
40, 50, 60,
VFTSF16B 4 25 50 592 100 72 220 10 562 10.5 4 7 4
75, 80, 100
40, 50, 60,
VFTSF18B 4 25 75 792 75 72 495 10 762 10.5 4 7 4
80, 100, 120
40, 50, 60,
VFTSF20B 4 25 75 792 100 72 420 10 762 10.5 4 7 4
80, 100, 120
40, 60, 80,
VFTSF22B 4 30 100 992 100 72 620 10 962 10.5 4 7 4
100, 120, 160
40, 60, 80,
VFTSF24B 4 30 100 1102 120 72 670 10 1065 10.5 4 7 4
100, 120, 160

COUNTER SUNK
SLOT BUSBAR HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE (CH) /
ITEM CODE QTY THICK- HOLE DIAMETER QTY
POLE (T) (W) (L) (P) THROUGH HOLE
/POLE NESS (HH) (J) (K)
(TH)

UM10 - 2 33 35 - 2 10 - TH 8.5 1

UM12 - 2 33 45 - 2 10 - TH 8.5 1

UM14 - 2 35 45 - 2 10 - TH 10.5 1

UM16 - 2 35 70 - 2 10 - TH 10.5 1

UM18 - 2 35 95 - 2 10 - TH 10.5 1

C 10
www.fibon.co.uk
FIBON Insulator
Vertical Flat Support

VFTSS
Fibon VFTS is one of the simple design for vertical fix main busbar support. The VFTS support comes in two simple
types, VFTSS is designed with slots to receive the copper busbars and VFTSF is designed complete with metal brackets
for clamp the copper busbar.

THICK- INTER- SLOT SLOT BUSBAR HOLE TO HOLE HOLE HOLE HOLE
NO. OF WIDTH LENGTH BUSBAR
ITEM CODE NESS PHASE (A) (B) WIDTH DEPTH THICK- HOLE DIAMETER QTY DIAMETER QTY
POLE (W) (L) HEIGHT
(T) (P) (S) (E) NESS (HH) (J1) (K1) (J2) (K2)

40, 50,
VFTSS10A 4 30 60 392 75 72 95 29 10 10 362 8.5 4 7 4
60, 75
40, 50,
VFTSS12A 4 30 60 592 75 72 295 29 10 10 562 8.5 4 7 4
60, 75, 80
40, 50, 60,
VFTSS14A 4 30 60 592 100 72 220 29 10 10 562 8.5 4 7 4
75, 80, 100
40, 50, 60,
VFTSS16A 4 35 60 792 75 72 495 29 10 10 762 8.5 4 7 4
80, 100, 120
40, 60,
VFTSS18A 4 35 75 992 100 72 620 31 10 10 80, 100, 962 10.5 4 7 4
120, 160
40, 60,
VFTSS20A 4 35 75 1102 120 72 670 31 10 10 80, 100, 1065 10.5 4 7 4
120, 160

HOLE
THICK- INTER- BUSBAR HOLE HOLE HOLE HOLE
NO. OF WIDTH LENGTH BUSBAR TO
ITEM CODE NESS PHASE (A) (B) THICK- DIAMETER QTY DIAMETER QTY
POLE (W) (L) HEIGHT HOLE
(T) (P) NESS (J1) (K1) (J2) (K2)
(HH)

40, 50,
VFTSS10B 4 20 60 392 75 72 95 10 362 8.5 4 7 4
60, 75
40, 50,
VFTSS12B 4 20 60 592 75 72 295 10 562 8.5 4 7 4
60, 75, 80
40, 50, 60,
VFTSS14B 4 20 60 592 100 72 220 10 562 8.5 4 7 4
75, 80, 100
40, 50, 60,
VFTSS16B 4 20 60 792 75 72 495 10 762 8.5 4 7 4
80, 100, 120
40, 60, 80,
VFTSS18B 4 20 75 992 100 72 620 10 962 10.5 4 7 4
100, 120, 160
40, 60, 80,
VFTSS20B 4 20 75 1102 120 72 670 10 1065 10.5 4 7 4
100, 120, 160

• VFTSS_A – Counter Sunk Hole (CS)

• VFTSS_B – Through Hole (TH)

C 11
www.fibon.co.uk
Main Busbar Vertical Support
Overview
Main Busbar Horizontal Support

Horizontal Fixed Support

HFS1P HFS3P HFS4P

Pg. D 2 Pg. D 3 Pg. D 4

Horizontal Compact Support

HCS1P HCS3P HCS4P

Pg. D 5 Pg. D 6 Pg. D 7

D1
www.fibon.co.uk
FIBON Insulator
Horizontal Fixed Support (1 pole)

HFS1P
Fibon HFS has been designed into 3 types, the HFS1P designed for 1 pole, HFS3P designed for 3 poles & HFS4P
designed for 4 poles. HFS are available in a variety of sizes to suit different distances between phases and the demand
of different amperages of the equipment.

THICK- BAR HOLE TO HOLE 1 HOLE 1 HOLE 2 HOLE 2

NO. OF WIDTH LENGTH BUSBAR BUSBAR
ITEM CODE NESS QTY/ HOLE DIAMETER QTY DIAMETER QTY
POLE (W) (L) THICKNESS HEIGHT
(T) POLE (HH) (J1) (K1) (J2) (K2)

HFS1P251203 1 25 60 178 1,2 142 10-12 80 11 2 11 2

HFS1P251205 1 25 60 198 1,2,3 162 10-12 100 11 2 11 2

HFS1P301803 1 30 80 218 1,2,3 182 10-12 120 11 2 11 4

HFS1P301803 1 30 80 258 1,2,3 222 10-12 160 11 2 11 4

D2
www.fibon.co.uk
FIBON Insulator
Horizontal Fixed Support (3 poles)

HFS3P
Fibon HFS has been designed into 3 types, the HFS1P designed for 1 pole, HFS3P designed for 3 poles & HFS4P
designed for 4 poles. HFS are available in a variety of sizes to suit different distances between phases and the demand
of different amperages of the equipment.

THICK- INTER- BAR HOLE TO HOLE 1 HOLE 1 HOLE 2 HOLE 2

NO. OF WIDTH LENGTH BUSBAR BUSBAR
ITEM CODE NESS PHASE QTY/ HOLE DIAMETER QTY DIAMETER QTY
POLE (W) (L) THICKNESS HEIGHT
(T) (P) POLE (HH) (J1) (K1) (J2) (K2)

HFS3P120503 3 12 30 210 50 1 180 5-10 20,25,30 9 3 9 2

HFS3P120753 3 12 30 295 75 1 265 5-10 30,40,50 9 3 9 2

HFS3P120903 3 12 30 390 90 1 360 5-10 40,50,60 9 3 9 2

HFS3P121003 3 12 30 370 100 1 340 5-10 50,60,80 9 3 9 2

HFS3P121103 3 12 30 410 110 1 380 5-10 60,80 9 3 9 2

HFS3P121203 3 12 60 420 120 1,2 390 5-12 80,100 9 6 7 4

HFS3P201203 3 20 40 478 120 1,2 440 5-12 80,100 9 3 9 4

HFS3P201205 3 20 60 420 120 1,2,3 390 5-12 80,100 9 3 9 4

100,120,
HFS3P201803 3 20 60 600 180 1,2 560 10-12 11 6 11 4
160

40,50,60,
HFS3P250903 3 25 50 578 90 1,2,3 540 5-10 9 3 9 4
80,100
40,50,60,
HFS3P251203 3 25 50 578 120 1,2,3 540 5-10 9 3 9 4
80,100
100,120,
HFS3P301803 3 30 80 650 180 1,2,3 610 10-12 11 6 11 4
160

D3
www.fibon.co.uk
FIBON Insulator
Horizontal Fixed Support (4 poles)

HFS4P
Fibon HFS has been designed into 3 types, the HFS1P designed for 1 pole, HFS3P designed for 3 poles & HFS4P
designed for 4 poles. HFS are available in a variety of sizes to suit different distances between phases and the demand
of different amperages of the equipment.

THICK- INTER- BAR HOLE TO BUSBAR HOLE 1 HOLE 1 HOLE 2 HOLE 2

NO. OF WIDTH LENGTH BUSBAR
ITEM CODE NESS PHASE QTY/ HOLE THICK- DIAMETER QTY DIAMETER QTY
POLE (W) (L) HEIGHT
(T) (P) POLE (HH) NESS (J1) (K1) (J2) (K2)

HFS4P120503 4 12 30 260 50 1 230 5-10 20,25,30 9 4 9 2

HFS4P120753 4 12 30 370 75 1 340 5-10 30,40,50 9 4 9 2

HFS4P120903 4 12 30 420 90 1 390 5-10 40,50,60 9 4 9 2

HFS4P121003 4 12 30 470 100 1 440 5-10 50,60,80 9 4 9 2

HFS4P121103 4 12 30 520 110 1 490 5-10 60,80 9 4 9 2

HFS4P121203 4 12 60 540 120 1,2 510 5-12 80,100 9 8 7 4

HFS4P201203 4 20 40 598 120 1,2 560 5-12 80,100 9 4 9 2

HFS4P201205 4 20 60 540 120 1,2,3 510 5-12 80,100 9 8 9 2

100,120,
HFS4P201803 4 20 60 760 180 1,2 720 10-12 11 8 11 2
160

HFS4P250903 4 25 50 698 90 1,2,3 660 5-10 40,50,60 9 4 9 2

HFS4P251203 4 25 50 698 120 1,2,3 660 5-10 40,50,60 9 4 9 2

100,120,
HFS4P301803 4 30 80 830 180 1,2,3 790 10-12 11 8 11 2
160

D4
www.fibon.co.uk
FIBON Insulator
Horizontal Compact Support (1 pole)

HCS1P
Fibon offers Horizontal Compact Support ( HSC ) for high amperage switchboards up to 7000A. The compact design
of clamping the conductors minimizes the space usage in the copper busbar compartment.

THICK- SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE

NO. OF WIDTH LENGTH BUSBAR
ITEM CODE NESS WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
POLE (W) (L) WIDTH
(T) (S) (E) (HH) HOLE (TH) (J) (K)

HCS1P050M 1 30 55 135 50.2 10.2 100 50 CH 15 / 9 4

HCS1P050E 1 30 20 135 50.2 10.2 100 50 TH 9 2

HCS1P050F 1 30 20 135 - - 100 - TH 9 2

HCS1P060M 1 30 55 145 60.2 10.2 110 60 CH 15 / 9 4

HCS1P-M
HCS1P060E 1 30 20 145 60.2 10.2 110 60 TH 9 2

HCS1P060F 1 30 20 145 - - 110 - TH 9 2

HCS1P080M 1 30 55 165 80.2 10.2 130 80 CH 15 / 9 4

HCS1P080E 1 30 20 165 80.2 10.2 130 80 TH 9 2

HCS1P-E
HCS1P080F 1 30 20 165 - - 130 - TH 9 2

HCS1P100M 1 30 55 185 100.2 10.2 150 100 CH 15 / 9 4

HCS1P100E 1 30 20 185 100.2 10.2 150 100 TH 9 2

HCS1P100F 1 30 20 185 - - 150 - TH 9 2

HCS1P-F

HCS1P120M 1 30 55 205 120.2 10.2 170 120 CH 15 / 9 4

HCS1P120E 1 30 20 205 120.2 10.2 170 120 TH 9 2

HCS1P120F 1 30 20 205 - - 170 - TH 9 2

HCS1P160M 1 30 55 245 160.2 10.2 210 160 CH 15 / 9 4

HCS1P160E 1 30 20 245 160.2 10.2 210 160 TH 9 2

HCS1P160F 1 30 20 245 - - 210 - TH 9 2

D5
www.fibon.co.uk
FIBON Insulator
Horizontal Compact Support (3 poles)

HCS3P
Fibon offers Horizontal Compact Support ( HSC ) for high amperage switchboards up to 7000A. The compact design
of clamping the conductors minimizes the space usage in the copper busbar compartment.

THICK- INTER- SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE

NO. OF WIDTH LENGTH BUSBAR
ITEM CODE NESS PHASE WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
POLE (W) (L) WIDTH
(T) (P) (S) (E) (HH) HOLE (TH) (J) (K)

HCS3P050M 3 30 55 330 90 50.2 10.2 280 50 CH 15 / 9 7

HCS3P050E 3 30 20 330 90 50.2 10.2 280 50 TH 9 4

HCS3P050F 3 30 20 330 90 - - 280 - TH 9 4

HCS3P060M 3 30 55 360 100 60.2 10.2 310 60 CH 15 / 9 7

HCS3P-M

HCS3P060E 3 30 20 360 100 60.2 10.2 310 60 TH 9 4

HCS3P060F 3 30 20 360 100 - - 310 - TH 9 4

HCS3P080M 3 30 55 420 120 80.2 10.2 370 80 CH 15 / 9 7

HCS3P080E 3 30 20 420 120 80.2 10.2 370 80 TH 9 4

HCS3P-E
HCS3P080F 3 30 20 420 120 - - 370 - TH 9 4

HCS3P100M 3 30 55 480 140 100.2 10.2 430 100 CH 15 / 9 7

HCS3P100E 3 30 20 480 140 100.2 10.2 430 100 TH 9 4

HCS3P100F 3 30 20 480 140 - - 430 - TH 9 4

HCS3P-F

HCS3P120M 3 30 55 540 160 120.2 10.2 490 120 CH 15 / 9 7

HCS3P120E 3 30 20 540 160 120.2 10.2 490 120 TH 9 4

HCS3P120F 3 30 20 540 160 - - 490 - TH 9 4

HCS3P160M 3 30 55 660 200 160.2 10.2 610 160 CH 15 / 9 7

HCS3P160E 3 30 20 660 200 160.2 10.2 610 160 TH 9 4

HCS3P160F 3 30 20 660 200 - - 610 - TH 9 4

D6
www.fibon.co.uk
FIBON Insulator
Horizontal Compact Support (4 poles)

HCS4P
Fibon offers Horizontal Compact Support ( HSC ) for high amperage switchboards up to 7000A. The compact design
of clamping the conductors minimizes the space usage in the copper busbar compartment.

THICK- INTER- SLOT SLOT HOLE TO COUNTER SUNK HOLE HOLE

NO. OF WIDTH LENGTH BUSBAR
ITEM CODE NESS PHASE WIDTH DEPTH HOLE (CH) / THROUGH DIAMETER QTY
POLE (W) (L) WIDTH
(T) (P) (S) (E) (HH) HOLE (TH) (J) (K)

HCS4P050M 4 30 55 420 90 50.2 10.2 370 50 CH 15 / 9 9

HCS4P050E 4 30 20 420 90 50.2 10.2 370 50 TH 9 5

HCS4P050F 4 30 20 420 90 - - 370 - TH 9 5

HCS4P060M 4 30 55 460 100 60.2 10.2 410 60 CH 15 / 9 9

HCS4P-M

HCS4P060E 4 30 20 460 100 60.2 10.2 410 60 TH 9 5

HCS4P060F 4 30 20 460 100 - - 410 - TH 9 5

HCS4P080M 4 30 55 540 120 80.2 10.2 490 80 CH 15 / 9 9

HCS4P080E 4 30 20 540 120 80.2 10.2 490 80 TH 9 5

HCS4P-E
HCS4P080F 4 30 20 540 120 - - 490 - TH 9 5

HCS4P100M 4 30 55 620 140 100.2 10.2 570 100 CH 15 / 9 9

HCS4P100E 4 30 20 620 140 100.2 10.2 570 100 TH 9 5

HCS4P100F 4 30 20 620 140 - - 570 - TH 9 5

HCS4P-F

HCS4P120M 4 30 55 700 160 120.2 10.2 650 120 CH 15 / 9 9

HCS4P120E 4 30 20 700 160 120.2 10.2 650 120 TH 9 5

HCS4P120F 4 30 20 700 160 - - 650 - TH 9 5

HCS4P160M 4 30 55 860 200 160.2 10.2 810 160 CH 15 / 9 9

HCS4P160E 4 30 20 860 200 160.2 10.2 810 160 TH 9 5

HCS4P160F 4 30 20 860 200 - - 810 - TH 9 5

D7
www.fibon.co.uk
Main Busbar Horizontal Support
Overview
Distribution Busbar Support

Drawer Busbar Support

DBSM DBSV

Pg. E 2 Pg. E 3

Load Centre Support

LCS3P LCS4P

Pg. E 4 Pg. E 4

Breaker Protection Support

BPS3P BPS4P

Pg. E 5 Pg. E 5

LowAmp Distribution Support

LDSQ LDST LDSK

Pg. E 6 Pg. E 6 Pg. E 7

E1
www.fibon.co.uk
FIBON Insulator
Drawer Busbar Support – M series

DBSM
Fibon offers Drawer Busbar Support for withdrawable switchboard compartments. The DBS has been designed for
3 poles or 4 poles. The male and female conductors are supported by either DBSV within the removable drawer or
DBSM for the dropper.

COUNTER
SLOT BUSBAR HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE BUSBAR SUNK (CH) /
ITEM CODE QTY THICK- HOLE DIAMETER QTY
POLE (T) (W) (L) (P) HEIGHT THROUGH
/POLE NESS (HH) (J) (K)
HOLE (TH)

40,50,63,80
DBSM3P03 3 25 32 150 55 1 6-6.5 55 CH 6.5 2
100,125,160
40,50,63,80
DBSM3P05 3 25 32 150 55 1 6-6.5 55 TH 6.5 2
100,125,160
40,50,63,80
DBSM3P07 3 25 32 160 60 1 6-6.5 60 CH 6.5 2
100,125,160
40,50,63,80
DBSM3P09 3 25 32 160 60 1 6-6.5 60 TH 6.5 2
100,125,160
HCS3P-M 40,50,63,80
DBSM4P03 4 25 32 210 55 1 6-6.5 55 CH 6.5 3
100,125,160
40,50,63,80
DBSM4P05 4 25 32 210 55 1 6-6.5 55 TH 6.5 3
100,125,160
40,50,63,80
DBSM4P07 4 25 32 230 60 1 6-6.5 60 CH 6.5 3
100,125,160
40,50,63,80
DBSM4P09 4 25 32 230 60 1 6-6.5 60 TH 6.5 3
100,125,160
40,50,63,80
DBSM6P03 6 25 32 320 55 1 6-6.5 55 CH 6.5 5
100,125,160
HCS1P-E
40,50,63,80
DBSM6P05 6 25 32 320 55 1 6-6.5 55 TH 6.5 5
100,125,160
40,50,63,80
DBSM6P07 6 25 32 340 60 1 6-6.5 60 CH 6.5 5
100,125,160
40,50,63,80
DBSM6P09 6 25 32 340 60 1 6-6.5 60 TH 6.5 5
100,125,160
40,50,63,80
DBSM8P03 8 25 32 430 55 1 6-6.5 55 CH 6.5 7
100,125,160
40,50,63,80
DBSM8P05 8 25 32 430 55 1 6-6.5 55 TH 6.5 7
100,125,160
DBSM6P
40,50,63,80
DBSM8P07 8 25 32 460 60 1 6-6.5 60 CH 6.5 7
100,125,160
40,50,63,80
DBSM8P09 8 25 32 460 60 1 6-6.5 60 TH 6.5 7
100,125,160

DBSM8P

E2
www.fibon.co.uk
FIBON Insulator
Drawer Busbar Support – V series

DBSV
Fibon offers Drawer Busbar Support for withdrawable switchboard compartments. The DBS has been designed for
3 poles or 4 poles. The male and female conductors are supported by either DBSV within the removable drawer or
DBSM for the dropper.

COUNTER
SLOT SLOT SLOT HOLE TO HOLE HOLE
NO. OF THICKNESS LENGTH INTERPHASE SUNK (CH) /
ITEM CODE WIDTH (W) QTY WIDTH DEPTH HOLE DIAMETER QTY
POLE (T) (L) (P) THROUGH
/POLE (S) (E) (HH) (J) (K)
HOLE (TH)

DBSV02V 3 25 60 182 55 1 6.3 38 156 TH 6.3 4

DBSV04V 3 25 60 192 60 1 6.3 38 166 TH 6.3 4

DBSV06V 4 25 60 237 55 1 6.3 38 211 TH 6.3 5

DBSV08V 4 25 60 252 60 1 6.3 38 226 TH 6.3 5

DBSV_V

COUNTER
SLOT SLOT SLOT HOLE TO HOLE HOLE HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE SUNK (CH) /
ITEM CODE QTY WIDTH DEPTH HOLE DIAMETER QTY DIAMETER QTY
POLE (T) (W) (L) (P) THROUGH
/POLE (S) (E) (HH) (J1) (K1) (J2) (K2)
HOLE (TH)

DBSV_S DBSV02S 3 15 150 220 55 1 6.3 11 198 TH 6.3 5 8 6

DBSV04S 3 15 150 230 60 1 6.3 11 208 TH 6.3 5 8 6

DBSV06S 4 15 150 275 55 1 6.3 11 253 TH 6.3 5 8 6

DBSV08S 4 15 150 290 60 1 6.3 11 268 TH 6.3 5 8 6

E3
www.fibon.co.uk
FIBON Insulator
Load Centre Support (3 poles, 4 poles)

LCS3P, LCS4P
Fibon LCS is designed for use in the low voltage Load Centre Power Distribution Board. It has been made from
Halogen Free Material being heat resistant up to 200 degree Celsius continuously and either 3 or 4 poles option.

COUNTER
SLOT SLOT HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE SLOT DEPTH SUNK (CH) /
ITEM CODE QTY WIDTH HOLE DIAMETER QTY
POLE (T) (W) (L) (P) (E) THROUGH
/POLE (S) (HH) (J) (K)
HOLE (TH)

LCS3P03 3 12 30 90 30 3 7 12.5 30 CH 5 2

LCS3P05 3 12 30 90 30 3 7 15.5 30 CH 5 2

LCS3P07 3 12 30 90 30 3 7 20.5 30 CH 5 2

LCS3P

COUNTER
SLOT SLOT HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE SLOT DEPTH SUNK (CH) /
ITEM CODE QTY WIDTH HOLE DIAMETER QTY
POLE (T) (W) (L) (P) (E) THROUGH
/POLE (S) (HH) (J) (K)
HOLE (TH)

LCS4P03 4 12 30 120 30 4 7 12.5 30 CH 5 3

LCS4P05 4 12 30 120 30 4 7 15.5 30 CH 5 3

LCS4P07 4 12 30 120 30 4 7 20.5 30 CH 5 3

LCS4P

E4
www.fibon.co.uk
FIBON Insulator
Breaker Protection Support (3 poles, 4 poles)

BPS3P, BPS4P
Fibon BPS has been designed to provide maximum protection to the incoming circuit breaker during the short circuit
event explosion. Fibon provides ASTA certified BPS Insulator for MCCB and ACB protection.

THICK- INTER- BAR HOLE TO BUSBAR HOLE HOLE

WIDTH LENGTH BUSBAR
ITEM CODE NO. OF POLE NESS PHASE QTY/ HOLE THICK- DIAMETER QTY
(W) (L) HEIGHT
(T) (P) POLE (HH) NESS (J1) (K1)

BPS3P03 3 5 30 90 25 1 25 3-5 10-15 11 3

BPS3P05 3 5 30 100 30 1 30 3-5 10-20 11 3

BPS3P07 3 5 30 110 35 1 35 3-5 10-25 11 3

BPS3P09 3 5 30 130 45 1 45 3-5 10-35 11 3

BPS3P11 3 5 30 140 50 1 50 3-10 10-40 11 3

BPS3P13 3 5 30 160 60 1 60 3-10 10-50 11 3

BPS3P15 3 5 30 180 70 1 70 3-10 10-60 11 3

THICK- INTER- BAR HOLE TO BUSBAR HOLE HOLE

WIDTH LENGTH BUSBAR
ITEM CODE NO. OF POLE NESS PHASE QTY/ HOLE THICK- DIAMETER QTY
(W) (L) HEIGHT
(T) (P) POLE (HH) NESS (J1) (K1)

BPS4P03 4 5 30 115 25 1 25 3-5 10-15 11 4

BPS4P05 4 5 30 130 30 1 30 3-5 10-20 11 4

BPS4P07 4 5 30 145 35 1 35 3-5 10-25 11 4

BPS4P09 4 5 30 175 45 1 45 3-5 10-35 11 4

BPS4P11 4 5 30 190 50 1 50 3-10 10-40 11 4

BPS4P13 4 5 30 220 60 1 60 3-10 10-50 11 4

BPS4P15 4 5 30 250 70 1 70 3-10 10-60 11 4

17

E5
www.fibon.co.uk
FIBON Insulator
LowAmp Distribution Support – Q series, T series

LDSQ, LDST
Fibon offers various designs of supports for distribution busbars. LowAmp Distribution Support is an unique design to
secure the distribution busbars in replacement of the common supports. The range of LDS includes Q, T, and K series
dependant on support arrangement.

COUNTER SUNK HOLE HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE HOLE TO HOLE HOLE QTY
ITEM CODE (CH) / THROUGH DIAMETER DIAMETER QTY
POLE (T) (W) (L) (P) (HH) (K1)
HOLE (TH) (J1) (J) (K2)

LDSQ02 4 15 87 140 20 110 TH 6 4 6.5 2

LDSQ04 4 20 102 160 25 130 TH 6 4 6.5 2

LDSQ06 4 20 117 180 30 150 TH 6 4 6.5 2

COUNTER SUNK HOLE HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE HOLE TO HOLE HOLE QTY
ITEM CODE (CH) / THROUGH DIAMETER DIAMETER QTY
POLE (T) (W) (L) (P) (HH) (K1)
HOLE (TH) (J1) (J) (K2)

LDST02 4 15 172 100 20 70 TH 6 4 6.5 2

LDST04 4 20 182 115 25 85 TH 6 4 6.5 2

LDST06 4 20 192 130 30 100 TH 6 4 6.5 2

E6
www.fibon.co.uk
FIBON Insulator
LowAmp Distribution Support – K series

LDSK
Fibon offers various designs of supports for distribution busbars. LowAmp Distribution Support is an unique design to
secure the distribution busbars in replacement of the common supports. The range of LDS includes Q, T, and K series
dependant on support arrangement.

COUNTER SUNK HOLE HOLE HOLE

NO. OF THICKNESS WIDTH LENGTH INTERPHASE HOLE TO HOLE HOLE QTY
ITEM CODE (CH) / THROUGH DIAMETER DIAMETER QTY
POLE (T) (W) (L) (P) (HH) (K1)
HOLE (TH) (J1) (J) (K2)

LDSK02 4 15 195 110 20 80 TH 6 6 6.5 2

LDSK04 4 20 210 130 25 100 TH 6 6 6.5 2

LDSK06 4 20 210 150 30 130 TH 6 6 6.5 2

E7
www.fibon.co.uk
Distribution Busbar Support
Overview
Special Insulators

Neutral Link Base

NLB NLS

Pg. F 2 Pg. F 2

Current Transformer Clamp

CT2H CT3H

Pg. F 3 Pg. F 4

Composite Separator
CSP CSC CSB

Pg. F 5 Pg. F 6 Pg. F 6

Dough/Sheet Moulding Compound(DMC/SMC) Insulator

D35, D51, D76 SD55 NT60 NT110

Pg. F 7 Pg. F 7 Pg. F 8 Pg. F 8

Insulation Tube
TBA TBB

Pg. F 9 Pg. F 9

F1
www.fibon.co.uk
FIBON Insulator
Neutral Link Base – B series, S series

NLB, NLS
Fibon Neutral Link Base has been ASTA Tested, and is designed to replace the DMC compound material that not
longer complies with the higher fault level demand of the modern world. The Neutral Link Base is offered in B and
S series depending on amperage of the application.

COUNTER SUNK
HOLE TO HOLE
NO. OF THICKNESS WIDTH LENGTH (CH) / HOLE QTY
ITEM CODE (U1) (U2) (U3) HOLE DIAMETER
POLE (T) (W) (L) THROUGH HOLE (K)
(HH) (J)
(TH)

NLB10 1 25 25 120 14 28 22 106 CH 8 6

NLB12 1 25 30 140 22.5 30 21 126 CH 8 6

NLB14 1 25 40 200 37 35 36 180 CH 10 6

NLB16 1 25 60 240 43 43 38 210 CH 10 6

COUNTER
HOLE TO MIDDLE HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH SUNK (CH) / HOLE QTY
ITEM CODE HOLE DIAMETER DIAMETER
POLE (T) (W) (L) THROUGH (K)
(HH) (N) (J)
HOLE (TH)

NLS10 1 30 30 65 40 CH 8.5 6.5 3

NLS12 1 30 35 70 45 CH 8.5 6.5 3

NLS14 1 30 35 90 65 CH 10.5 6.5 3

F2
www.fibon.co.uk
FIBON Insulator
Current Transformer Clamp

CT2H
Fibon Current Transformer Clamp is high elasticity glassfibre reinforcement polymer. The clamp provides continuous
forces to secure and support the current transformer. It is used to replace the materials such as PVC, PP, PC, PS or
thermal plastic that generally degrade due to UV and especially temperature generated from the conductors.

HOLE MIDDLE
THICKNESS WIDTH LENGTH HOLE TO HOLE COUNTER SUNK (CH) /
ITEM CODE DIAMETER HOLE DIAMETER
(T) (W) (L) (HH) THROUGH HOLE (TH)
(J) (N)

CT2H10 9 12 80 40 TH 6.5 -

CT2H12 9 12 95 50 TH 6.5 -

CT2H14 9 12 95 60 TH 6.5 -

CT2H16 9 12 120 70 TH 6.5 -

CT2H18 9 12 120 90 TH 6.5 -

CT2H20 9 12 180 110 TH 6.5 -

CT2H22 9 12 180 135 TH 6.5 -

CT2H24 9 12 200 160 TH 6.5 -

CT2H26 12 12 75 45 TH 6.5 -

CT2H28 12 12 100 70 TH 6.5 -

CT2H30 12 12 120 90 TH 6.5 -

CT2H32 12 12 125 95 TH 6.5 -

CT2H34 12 12 140 110 TH 6.5 -

CT2H36 12 12 170 140 TH 6.5 -

CT2H38 12 12 190 160 TH 6.5 -

• 2 pieces in 1 set

F3
www.fibon.co.uk
FIBON Insulator
Current Transformer Clamp

CT3H
Fibon Current Transformer Clamp is high elasticity glassfibre reinforcement polymer. The clamp provides continuous
forces to secure and support the current transformer. It is used to replace the materials such as PVC, PP, PC, PS or
thermal plastic that generally degrade due to UV and especially temperature generated from the conductors.

HOLE MIDDLE
THICKNESS WIDTH LENGTH HOLE TO HOLE COUNTER SUNK (CH) /
ITEM CODE DIAMETER HOLE DIAMETER
(T) (W) (L) (HH) THROUGH HOLE (TH)
(J) (N)

CT3H10 9 12 80 40 TH 6.5 4.5

CT3H12 9 12 95 50 TH 6.5 4.5

CT3H14 9 12 95 60 TH 6.5 4.5

CT3H16 9 12 120 70 TH 6.5 4.5

CT3H18 9 12 120 90 TH 6.5 4.5

CT3H20 9 12 180 110 TH 6.5 4.5

CT3H22 9 12 180 135 TH 6.5 4.5

CT3H24 9 12 200 160 TH 6.5 4.5

CT3H26 12 12 75 45 TH 6.5 4.5

CT3H28 12 12 100 70 TH 6.5 4.5

CT3H30 12 12 120 90 TH 6.5 4.5

CT3H32 12 12 125 95 TH 6.5 4.5

CT3H34 12 12 140 110 TH 6.5 4.5

CT3H36 12 12 170 140 TH 6.5 4.5

CT3H38 12 12 190 160 TH 6.5 4.5

• 2 pieces in 1 set

F4
www.fibon.co.uk
FIBON Insulator
Composite Separator

CSP
Fibon Composite Separator is used to reduce the thermal conductivity in the high ampere switchboard and
switchgear. Subsequently it helps to maintain the lower working temperature in the electrical equipments which
generate heat constantly.

NO. OF THICKNESS WIDTH LENGTH NO. OF THICKNESS WIDTH LENGTH

ITEM CODE ITEM CODE
HOLE (T) (W) (L) HOLE (T) (W) (L)

CSP202 8 2 190 190 CSP602 8 2 590 190

CSP203 8 2 190 290 CSP603 8 2 590 290

CSP204 8 2 190 390 CSP604 8 2 590 390

CSP206 8 2 190 590 CSP606 8 2 590 590

CSP208 8 2 190 790 CSP608 8 2 590 790

CSP210 8 2 190 990 CSP610 8 2 590 990

CSP212 8 2 190 1190 CSP612 8 2 590 1190

CSP214 8 2 190 1390 CSP614 8 2 590 1390

CSP216 8 2 190 150 CSP616 8 2 590 1590

CSP218 8 2 190 1790 CSP618 8 2 590 1790

CSP220 8 2 190 1990 CSP620 8 2 590 1990

CSP402 8 2 390 190 CSP802 8 2 790 190

CSP403 8 2 390 290 CSP803 8 2 790 290

CSP404 8 2 390 390 CSP804 8 2 790 390

CSP406 8 2 390 590 CSP806 8 2 790 590

CSP408 8 2 390 790 CSP808 8 2 790 790

CSP410 8 2 390 990 CSP810 8 2 790 990

CSP412 8 2 390 1190 CSP812 8 2 790 1190

CSP414 8 2 390 1390 CSP814 8 2 790 1390

CSP416 8 2 390 1590 CSP816 8 2 790 1590

CSP418 8 2 390 1790 CSP818 8 2 790 1790

CSP420 8 2 390 1990 CSP820 8 2 790 1990

F5
www.fibon.co.uk
FIBON Insulator
Composite Separator

CSC, CSB
Fibon Composite Separator is used to reduce the thermal conductivity in the high ampere switchboard and
switchgear. Subsequently it helps to maintain the lower working temperature in the electrical equipments which
generate heat constantly.

COUNTER
HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE SUNK (CH) /
ITEM CODE (A) (B) HOLE DIAMETER QTY
POLE (T) (W) (L) (P) THROUGH
(HH) (J) (K)
HOLE (TH)

CSC03 4 2 80 160 30 26 26 140 TH 6.5 4

CSC05 4 2 80 219 45 40 26 140 TH 6.5 4

CSC07 4 2 80 160 30 26 26 140 TH 6.5 4

CSC09 4 2 80 219 45 40 40 140 TH 6.5 4

COUNTER
SLOT BUSBAR HOLE TO HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH INTERPHASE BUSBAR SUNK (CH) /
ITEM CODE QTY THICK- HOLE DIAMETER QTY
POLE (T) (W) (L) (P) HEIGHT THROUGH
/POLE NESS (HH) (J) (K)
HOLE (TH)

CSB03 4 12 70 230 55 1 10 30 210 TH 8 4

CSB05 4 12 70 310 60 1 10 50 290 TH 8 4

CSB07 4 12 70 350 80 1 10 60 330 TH 8 4

CSB09 4 12 70 430 100 1 10 80 410 TH 8 4

F6
www.fibon.co.uk
FIBON Insulator
Dough/Sheet Moulding Compound Insulator

DMC – D35, D51, D76, SD55

Fibon DMC/SMC insulators are suitable for use in low amperage equipment and generally used to make parts or
housing of components that do not required high mechanical strength.

INSERT
HEIGHT INSERT SUITABLE FOR OPENING RECOMMEND
ITEM CODE THREAD INSERT
(H) MATERIAL HOLE FOR COPPER TORQUE
(M)

D35 35 8 HEXAGON BRASS 8.5 – 9 10 – 13

D51 51 8 HEXAGON BRASS 8.5 – 9 12 – 15

D76 76 10 HEXAGON BRASS 10.5 - 11 12 – 15

Diameter 1 Diameter 2 Diameter 3 Height 1 Height 2 Height 3

ITEM CODE
(D1) (D2) (D3) (H1) (H2) (H3)

SD55 16 28 55 5 14 6

F7
www.fibon.co.uk
FIBON Insulator
Dough/Sheet Moulding Compound Insulator

NT60, NT110
Fibon DMC/SMC insulators are suitable for use in low amperage equipment and generally used to make parts or
housing of components that do not required high mechanical strength.

COUNTER
HOLE TO MIDDLE HOLE HOLE
NO. OF THICKNESS WIDTH LENGTH SUNK (CH) / HOLE QTY
ITEM CODE HOLE DIAMETER DIAMETER
POLE (T) (W) (L) THROUGH (K)
(HH) (N) (J)
HOLE (TH)

NT60 1 25 25 60 35 CH 8 8.5 3

HOLE COUNTER SUNK HOLE HOLE HOLE

THICKNESS Height LENGTH
ITEM CODE TO HOLE (CH) / THROUGH DIAMETER DIAMETER QTY
(T) (H) (L)
(HH) HOLE (TH) (J1) (J2) (K2)

NT110 6 38 110 85 TH 10 8 3

F8
www.fibon.co.uk
FIBON Insulator
Insulation Tube

TBA, TBB
Fibon Insulation Tube is used to insulate the metal studs that are close to the conductors, thereby increasing the
creepage & clearance distances between the stud or bolt and the conductor

BUSBAR SUPPORT HEIGHT

LENGTH SLOT INNER OUTER BUSBAR
ITEM CODE STUD
(L) DEPTH DIMENSION DIMENSION FROM TO HEIGHT

TBA03 32 10 8 12 35 40 40 -

TBA05 42 10 8 12 35 40 50 -

TBA07 47 10 8 12 35 40 55 -

TBA09 52 10 8 12 35 40 60 -

TBA11 62 10 8 12 35 40 70 -

TBA13 72 10 8 12 35 40 80 -

TBA15 82 10 8 12 35 40 90 -

TBA17 92 10 8 12 35 40 100 -

TBA19 112 10 8 12 35 40 120 -

TBA21 142 10 8 12 35 40 150 -

TBA23 152 10 8 12 35 40 160 -

BUSBAR SUPPORT HEIGHT

LENGTH SLOT INNER OUTER BUSBAR STUD
ITEM CODE
(L) DEPTH DIMENSION DIMENSION FROM TO HEIGHT (R)

TBB03 32 10 8 12 45 50 40 165

TBB05 42 10 8 12 45 50 50 175

TBB07 47 10 8 12 45 50 55 180

TBB09 54 10 8 12 45 50 60 185

TBB11 62 10 8 12 45 50 70 195

TBB13 72 10 8 12 45 50 80 205

TBB15 82 10 8 12 45 50 90 215

TBB17 92 10 8 12 45 50 100 225

TBB19 112 10 8 12 45 50 120 245

TBB21 142 10 8 12 45 50 150 275

TBB23 152 10 8 12 45 50 160 285

F9
www.fibon.co.uk
Special Insulator
FIBON Appendix
Notes

I1
www.fibon.co.uk
FIBON Appendix
Notes

I2
www.fibon.co.uk
FIBON Appendix
Notes

Attn: Subject: Date:

From:

I3
www.fibon.co.uk
FIBON Appendix
Notes

Attn: Subject: Date:

From:

I4
www.fibon.co.uk
FIBON Appendix
Notes

I5
www.fibon.co.uk
FIBON Appendix
Notes

I6
www.fibon.co.uk
 www.fibon.co.uk

Company
FIBON UK LIMITED FIBON AUSTRALIA PTY. LTD. HEXA ANALISA SDN. BHD. HEXA ANALISA SDN. BHD.
19, Broadlands Rise, Unit 11, 18 Loyalty Road, 12A, Jalan 20, Taman Sri Kluang, 10 Anson Road,
Lichfield, Staffordshire WS14 9SF, North Rocks, 2151 NSW, 86000 Kluang, Johor, # 03-09 International Plaza,
United Kingdom. Australia. Malaysia. Singapore 079903.
Tel: (+44) 154 325 1277 Tel: (+612) 9890 8878 Tel: (+607) 773 6918 Tel : (+65) 6227 8663
Fax: (+44) 154 330 4167 Fax: (+612) 9890 8878 Fax: (+607) 774 2025 Fax: (+65) 6225 6167
Mobile: (+44) 780 469 7732 Mobile: +61 (0) 424 985 598 Mobile: (+60 12) 712 9500 Mobile: (+65) 9661 0765
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected]

Distributor
TEAM INDUSTRIAL SUPPLIES PC ELEMAC CO. LTD. LAPLACE ELECTRIC LIMITED
No. 51, Jalan SS2/10, 276/33, Moo 1, Suksawad Rd., Unit C, 5/F,
47300, Petaling Jaya, Lamfapa, Prasamujadee, Southest Industrial Building,
Selangor. Samutprakarn 10290 Thailand. 611-619, Castle Peak Road,
Tel: (+603) 7877 8478 Tel: (+662) 464 3500 Tsuen Wan, N.T. Hong Kong.
Fax: (+603) 7877 0842 Fax: (+662) 464 3500 Tel: (+852) 2413 1255
Fax: (+852) 2413 1277