Scribd
Upload
67 views3 pages

Broaching Machine

The document discusses broaching, a machining process that uses a special cutting tool called a broach. Broaching involves linear motion of the tool to remove material from the workpiece in a single pass, providing better surface finish and accuracy than other processes. The document describes broaching machine operation, types of broaching, broaching tools, and advantages and disadvantages of broaching.

Uploaded by

hashimtkmce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views3 pages

Broaching Machine

The document discusses broaching, a machining process that uses a special cutting tool called a broach. Broaching involves linear motion of the tool to remove material from the workpiece in a single pass, providing better surface finish and accuracy than other processes. The document describes broaching machine operation, types of broaching, broaching tools, and advantages and disadvantages of broaching.

Uploaded by

hashimtkmce
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SUBJECT:-PRODUCTION TECHNOLOGY (MECH.

2ND YEAR)

NAME:-ABHAY SUNDRIYAL DATE:-04/04/2020

BROACHING MACHINE
Broaching is a machining process with a special designed multi point cutting tool called broach.
This process is widely used in automobile industries for machining various holes, key
ways, gears etc. Broaching operation involves linear motion of tool about the work piece. This
movement of tool removes material from work piece and provides a desired shape. Broaching
tools involve a large number of progressive teeth which make this operation different from other
process. Each tooth takes off a successive layer of the material which removes large material in a
single pass.
One of the major advantages of using this operation in various industries is its ability to give
better surface finish and good accuracy with mass production rate. In this article we will discuss
about broaching operation Principle, tools, types, advantages and disadvantages.

Principle and Operation:


As we discussed the metal removal process in broaching operation is similar to shaping
process except it uses a series of progressive teeth which can cut more material in a single pass.
Shaping process requires number of strokes to cut required width of work piece in which each
stroke removes a thin layer of metal. This process needs more time which is not beneficial. This
limitation is taken off by broaching process by providing a successive series of cutting edges on
a rod or bar type cutter.

Machine Tool:
Broaching uses a multi point cutting tool having a series of progressive cutting teeth. This tool
should have high strength, hardness, cutting speed and wear resistance properties. It is made by
high strength tooling material like high speed steel, cemented carbide etc. This tool is mounted
on broaching machine.
Broaching machine is simple in construction. It is used to provide linear motion of the tool and hold the
work piece at stationary position. The tool movement can be either vertically or horizontally. According
to it, these machines can be classified into two type vertical machine and horizontal machine. Horizontal
machine is mostly used for internal machining and vertical machines are used for external and surface
machining.

Types:
Broaching can be classified into following types:

Internal Broaching:
Internal broaching is mainly used to enlarge holes. This process generally uses pull type broach
but for lighter work piece, it sometime uses push type broach.

External Broaching:

External broaching is mainly used to flattening of a surface, machining key ways, slots, grooves
on outer part of an object such as shaft etc. This process is also used for gear manufacturing
process.
Pull Types Broaching:
A broach which is subjected to tensile force during machining, called pull broach and the type of
broaching operation by pull broach is known as pull broaching. This operation prevents
misalignment and buckling. The pull broach is usually made in single piece and used for internal
broaching.
Push Type Broaching:
Push type broach is usually subjected to compression force during machining. These are made
shorter compare to pull type broach and mostly used for external broaching.

Advantages and Disadvantages:


Advantages:
 High production rate because whole amount of metal is removed in single stroke.
 High surface finish and better accuracy.
 Broaching can be used for both internal and external machining.
 Broaching machines are simple in design and construction.
 It can be used for mass production.
Disadvantages:
 High tool cost.
 This process needs a special design tool for each process.
 This is not suitable for small batch production.
 It is only suitable for machining holes and flat surfaces.

Nomenclature of broaching tool


Both pull and push type broaches are made in the form of slender rods or bars of varying section
having along its length one or more rows of cutting teeth with increasing height (and width
occasionally). Push type broaches are subjected to compressive load and hence are made shorter
in length to avoid buckling.

The general configuration of pull type broaches, which are widely used for enlarging and
finishing preformed holes

 Pull end for engaging the broach in the machine


 Neck of shorter diameter and length, where the broach is allowed to fail, if at all, under
overloading
 Front pilot for initial locating the broach in the hole
 Roughing and finishing teeth for metal removal
 Finishing and burnishing teeth for fine finishing
 Rear pilot and follower rest or retriever

You might also like