Scribd
Upload
48 views1 page

Note Calcul Poteaux

This document summarizes the structural analysis of a steel column. It provides the material properties of steel with a yield strength of 235 MPa. It also lists the geometric properties of a round pipe section used for the column with a diameter of 107 cm. The stresses are then calculated for the column under a given load case, with the axial stress equal to 0.89 MPa, the bending stress equal to 15.25 MPa, and the shear stresses satisfying design requirements. The column passes the verification checks for buckling and stress.

Uploaded by

Abir Jamali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
48 views1 page

Note Calcul Poteaux

This document summarizes the structural analysis of a steel column. It provides the material properties of steel with a yield strength of 235 MPa. It also lists the geometric properties of a round pipe section used for the column with a diameter of 107 cm. The stresses are then calculated for the column under a given load case, with the axial stress equal to 0.89 MPa, the bending stress equal to 15.25 MPa, and the shear stresses satisfying design requirements. The column passes the verification checks for buckling and stress.

Uploaded by

Abir Jamali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 1

CALCUL DES STRUCTURES ACIER

----------------------------------------------------------------------------------------------------------------------------------------
NORME: CM66
TYPE D'ANALYSE: Vérification des pièces
----------------------------------------------------------------------------------------------------------------------------------------
FAMILLE:
PIECE: 4 Poteau_4 POINT: 3 COORDONNEE: x = 1.00 L = 3.40 m
----------------------------------------------------------------------------------------------------------------------------------------
CHARGEMENTS:
Cas de charge décisif: 1 PERM1
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAU:
ACIER fy = 235.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

PARAMETRES DE LA SECTION: RONDE P


ht=107.0 cm
Ay=410.37 cm2 Az=410.37 cm2 Ax=820.74 cm2
ea=2.5 cm Iy=1120978.41 cm4 Iz=1120978.41 cm4 Ix=2241956.82 cm4
Wely=20952.87 cm3 Welz=20952.87 cm3
----------------------------------------------------------------------------------------------------------------------------------------
CONTRAINTES: SigN = 72.83/820.74 = 0.89 MPa
SigFy = 4.22/1587681.61 = 0.00 MPa
SigFz = 319.65/20954.69 = 15.25 MPa
----------------------------------------------------------------------------------------------------------------------------------------

PARAMETRES DE DEVERSEMENT:
----------------------------------------------------------------------------------------------------------------------------------------
PARAMETRES DE FLAMBEMENT:

en y: en z:
Ly=3.40 m Muy=27594.86 Lz=3.40 m Muz=27594.86
Lfy=3.40 m k1y=1.00 Lfz=3.40 m k1z=1.00
Lambda y=9.20 kFy=1.00 Lambda z=9.20 kFz=1.00
----------------------------------------------------------------------------------------------------------------------------------------
FORMULES DE VERIFICATION:
k1*SigN + kFy*SigFy + kFz*SigFz = 1.00*0.89 + 1.00*0.00 + 1.00*15.25 = 16.15 < 235.00 MPa (3.731)
1.54*Tauy = |1.54*-2.48| = |-3.82| < 235.00 MPa (1.313)
1.54*Tauz = 1.54*0.13 = 0.20 < 235.00 MPa (1.313)
----------------------------------------------------------------------------------------------------------------------------------------
Profil correct !!!

You might also like