SUPEREYES

Handheld Digital Microscope (End-scope)

User's Manual
Introduction
Thank you for using SUPEREYES Handheld Digital End-scope

Handheld Digital End-scope has a wide scope of applications, such as:

1. Skin Test

2. Hair root test

3. Industrial inspections (such as print PCB board, precise equipment)

4. Printing

5. Textile

6. Biologic inspection

7. Antique and Jewelers inspection

8. Crime scene investigation

9. Others

Handheld Digital End-scope can be connect with computer and easy to

operate

Using the additional software, you can make picture capture and video

recording easily.

In order to make you enjoy the funny to use Handheld Digital End-scope,

please read this User's Manual.

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com

 Contents
Introduction

Contents

Specification

System requirements

Safety Precautions

Name of Parts

Hardware installation and using

Software installation and using

Installation

Previewing

Picture capture

Video recording

Setting picture and video document conservation

Preview the stored picture and video

Additional

Langue selection

Difficulty resolution

Certificates

Disclaimer

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com

 Specification:
1. Resolution:2M

2. inner optic-lens

3. Magnification:10-200times

4. measurement function （some models has）

5. Take photos in shaking moment

6. Inner LED illumination

7. Display speed: 30FPS

8. Interface: USB (PC), AV

System Requirement:
The computers should be required as:

OS: Windows 98SE/Me/2000/XP, Win98/98SE/VISTA

XP/VISTA----don’t need driver

CPU: Pentium 233MHz&nbsp

Memory: 256MB SDRAM

Interface: USB2.0inter

HDD storage space: at least 600MB

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com

 Safety Precautions:
1. Avoid touching the lens with finger to protect electrostatic damage.

2. Do not attempt to service this product yourself. Opening the covers

may expose you to dangerous voltage points or other risks.

3. When hands are wet, do not plug in or remove the adaptor or other

connectors.

4. Using or storing USB microscope, do not plug in any other cables.

5. Do not use any detergent or volatile solution, which will damage the

camera case, painted surfaces & lens.

6. If the lens is dirty, please use a kens brush on soft cloth to wipe clean.

Avoid touching them with your fingers. Exercise care to avoid

scratching the lens.

7. Without protection, do not put Microscope outdoor to avoid the lens

damaged by high temperature or humidity.

8. Humidity: 45%~85%.

9. If water has entered stage, immediately turn the power off and use

dryer neither.

10. Using or storing USB microscope, need to watch all cables to avoid

trip over.

11. To avoid electric shock, remove all electric PC or TV.

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com

 Component
1. The body of digital end-scope(attached photos on hardware

installation and User's Manual )

2. CD(attached on the photos)

3. tripod(for microscope using )

4. Desktop microscope stand (optional)

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com

Created with SmartPrinter trail version www.i-enet.com
 Software Installation Procedure
1. Plug USB Cable into PC( or put the AV into the AV of monitor after

power on )

Created with SmartPrinter trail version www.i-enet.com

 2. If need fix, please fix the body of microscope into the clip of the

tri-pod (accurately operation please choose professional

microscope-stand when accurately operation is needed), adjust the

lens to the goods inspection.

3. Choose the suitable distance between the stage and the objects, adjust

the focus.

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Software Installation Procedure

1. Installation

Installation should follow the bellow SUPEREYES setup installation

instruction

2. How to review the microscope

After plug into USB port ,the machine will show “new device USB

microscope ”on right bottom corner, that mean the machine find the

microscope ,than you can select “preview” to view item your are testing.

3. How to make picture capture.

There is two ways that you can able to picture capture:

A. Click “shoot” in” File” menu.

Created with SmartPrinter trail version www.i-enet.com

 B. Select “Camera” icon .

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

4. How to make video recording.

Almost same as picture capture, you also have two ways that you can able

to video recording:

A. Click “record start” in “File” menu.

B. Select “video ”Icon

Select “pause” and “stop” to setup.

5. How to preset the picture and video recording file.

The default allocate file for picture and video is in the file of

“Picture” “video” video in the software, but you can change the

allocate file path by setting the “picture path” “Video path”.

Created with SmartPrinter trail version www.i-enet.com

 SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

6. Review the picture and video that you taken.

When the photos and videos are preset in the file, you can open it

through

---- Open the picture folder

---- Open the video folder.

And you can also review the picture/video by selecting the follow

frames:

Created with SmartPrinter trail version www.i-enet.com

 SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

7. Additional function:

A. Scale function: Click this button, the picture will have

Axis function .
C. Video format output function: you can customized your video

format function by selecting AVI/WMV

Video player function: is video player for recording video.

8. Language switch function.

Our software has three types language version available: Chinese,

English and German.

Created with SmartPrinter trail version www.i-enet.com

 9. To Measure the object :
Click the ruler icon on the tool bar and a check mark will appear on the

screen, move the check mark to where u would like to measure, pull the

check mark and release it , a measurement will pop up to the screen.

To Adjust Settings:

At setting option, select “device setting”, you can adjust the brightness,

contrast, white balance, etc., as you like.

Before your first measure, you need to adjust the measurement setting to

get accurate measurement, otherwise the measurement will

be wrong. Please follow below steps to get it done.

Created with SmartPrinter trail version www.i-enet.com

 ~ put a real ruler & use the microscope to view the “mm” section . Select

“measure setting” and a rule setting box is pop out.

Measure the “mm” section & change the Standard Length from the pop out

box to 1mm & click Save, the software will save it for the on

going measure.

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Difficulty resolution

items Trouble vision reason solution

LED is closed Open LED

Preview is closed Open preview
1 blank screen
No suitable devices Choose suitable devices
Bad connect with PC Connect USB again

Created with SmartPrinter trail version www.i-enet.com

 Dirty lens
Clean by lens- bumf
Incorrect focusing
Picture vague、 Adjust focusing
2 Bad connect with PC
discolour, slow Connect USB again
The Configuration of PC is too
Choose new PC
low

Picture Bad connect with PC Connect USB again

3
distortion Trouble inside of microscope Back to repair

Choose the suitable

4 Flicker picture Bad frequency
frequency

Can not Bad connect with PC Connect USB again

5
recognize Trouble inside of microscope Back to repair

Make the touch- bottom

Touch action Climate effect
6 Humidity
slow, no action Trouble inside of microscope
Back to repair

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Certificate

Created with SmartPrinter trail version www.i-enet.com

 SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Disclaimer
The manufacturer and distributor of this product shall not take the

Created with SmartPrinter trail version www.i-enet.com

 responsibilities on the damages caused by the improper using of this

product or other artificially damages.

The content of this User manual is based on the current specification

of this product. The manufacturer D&F Corp shall not take the

responsibility of any inconsistent of the specification to the product

for the purpose of improvements and other reasons. meanwhile, D&F

Corp do not have the obligation for updating the content and any

information of this manual momentarily .

SUPEREYES Handheld Digital Microscope (End-scope) User's Manual

Created with SmartPrinter trail version www.i-enet.com