Manual Everbuild Evercryl One Coat 15341

PRODUCT DATA SHEET
EVERBUILD® EVERCRYL® ONE COAT

A RESIN BASED, FIBRE RE-ENFORCED, INSTANT ROOF REPAIR COMPOUND
PRODUCT DESCRIPTION USES

EVERBUILD® EVERCRYL® ONE COAT is a resin based, ▪ General sealing, maintenance, repair and water-
fibre re-enforced roof repair compound which is ef- proofing of most common roofs in wet or dry condi-
fective on all common roofing surfaces and types, giv- tions– for use on concrete, fibre/cement, roofing felt,
ing an instant roof repair even in the wet and on wet mastic asphalt, existing bituminous roof coatings, ri-
surfaces. May also be applied in frosty conditions gid uPVC corrugated iron, metals, slates, brickwork,
down to –5°C. EVERBUILD® EVERCRYL® ONE COAT is tiles, lead, copper and zinc.
instantly waterproof when applied, so there is no fear ▪ Waterproofing guttering (plastic and metal), down-
of wash off, so emergency leaks can be tackled imme- pipes, gully’s, flashings, upstands, vents and lead-
diately as there is no need to wait for the rain to stop. work.
EVERBUILD® EVERCRYL® ONE COAT is brush applied
and dries to a smooth seamless flexible membrane. CHARACTERISTICS / ADVANTAGES
Because of the high level of fibre re-
enforcement, EVERBUILD® EVERCRYL® ONE COAT will ▪ May be applied in damp and wet conditions
bridge small cracks and requires only a one-coat brush ▪ Instantly waterproof, perfect for emergency repairs
application to give instant and total water protection, ▪ Formulated from lightfast acrylic polymers to with-
even in areas subject to ponding. EVERBUILD® EVER- stand sunlight for longer periods than traditional
CRYL® ONE COAT requires no primer on sound non- bitumen coatings
porous surfaces. ▪ Fibre re-enforced to bridge small cracks (except
translucent)
▪ Primerless adhesion to most bituminous and non
porous surfaces
▪ Fast and easy to apply, only one coat required
Curing Method Via solvent loss and phys-

ical drying
PRODUCT INFORMATION
Chemical Base Modified acrylic re-enforced with Dralon fibres in solvent blend
Packaging 1kg, 2.5kg, 5kg and 20kg tins - Grey
2.5kg and 5kg tins - Black
5kg tins - White
1kg and 5kg tins - Translucent
Colour Black, Grey, White, Translucent
Shelf Life 24 months from date of manufacture in tightly sealed undamaged contain-
ers, when stored between 5 and 25°C
Product Data Sheet

March 2018, Version 01.01
020915159000000001
1/3
Storage Conditions Store in cool dry conditions away from all sources of ignition.
Do not exceed 60°C. Will withstand frost.
Density 1.05 g/cm³
Viscosity Brushable paste
TECHNICAL INFORMATION
Elongation at Break 500%
Service Temperature -25°C to +100°C
APPLICATION INFORMATION
Yield 950g – 1.9kg/m2 (1-2 litres/m2)
Ambient Air Temperature -5°C to + 35°C
Drying time 6-7 days depending on temperature and thickness of coating
APPLICATION INSTRUCTIONS APPLICATION
SUBSTRATE PREPARATION Follow all safety pre-cautions identified on label,

Safety Data Sheet is available on website www.ever-
No roof-coating product can be expected to repair an build.co.uk or on request.
existing roof that is not structurally sound and stable. STIR WELL BEFORE USE. Apply by brush in a one coat
Before using a surface coating the roof structure at a rate of 1-2 litres per square meter. In extreme
should be inspected and, if necessary, put in order. All cases, a second coat may be applied 2-3 days after ini-
cracked, broken, slipped or missing slates, tiles, sheets tial application.
or other forms of covering should be replaced or re-
fixed and cracks in felt or asphalt filled. (Safety Re- CLEANING OF TOOLS
commendation: do not coat roof lights, windows, glass Clean tools, brushes etc. with brush cleaner or white
or translucent sheets. These will constitute a hidden spirits.
hazard if disguised).
Preparation of the surface is of great importance and
will influence the degree of adhesion and life of the LIMITATIONS
renovation. All roof surfaces to be coated should be ▪ Do not use in areas where subsequent solvent or oil
sound, stable, clean, i.e. free from loose debris, dirt, contact is likely.
dust and grease. All traces of algae and fungi growth ▪ Avoid inhalation of vapours.
should be removed using a stiff-bristled brush. Where ▪ Do not use on Styrofoam or PVC foil.
algae and fungi have been present, remove them com- ▪ As the manufacturer cannot know all the uses its
pletely and treat the surface with EVERBUILD 404 FUN- products may be put to, it is the users responsibility
GICIDAL WASH to kill any remaining spores, thereby to determine suitability for use.
discouraging the return of the growths. ▪ If in doubt, contact technical services department for
Make good any holes or loose felt/slates/tiles etc. Fill advice.
holes/imperfections with BLACK JACK BITUMEN MAS-
TIC. Stick down loose felt etc with BLACK JACK ROOF
FELT ADHESIVE. Blisters in roofing felt must be cut,
VALUE BASE
dried, re-bonded and sealed. New metal surfaces must All technical data stated in this Data Sheet are based
be degreased with a suitable solvent. Remove all rust on laboratory tests. Actual measured data may vary
or treat rusty surfaces with a rust inhibitive primer (eg due to circumstances beyond our control.
zinc phosphate based). All non- bituminous, porous or
friable surfaces must be primed with BLACK JACK BITU- LOCAL RESTRICTIONS
MEN AND FLASHING PRIMER allowing primer to dry
thoroughly before use. Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
uses.
ECOLOGY, HEALTH AND SAFETY

For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
Product Data Sheet

020915159000000001
2/3
physical, ecological, toxicological and other safety-re-
lated data.
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
EVERBUILD BUILDING PRODUCTS LTD SIKA LIMITED SIKA IRELAND LIMITED

Site 41, Knowsthorpe Way Watchmead Ballymun Industrial Estate
Cross Green Industrial Estate Welwyn Garden City Ballymun
Leeds, LS9 0SW Hertfordshire, AL7 1BQ Dublin 11, Ireland
Tel: 0113 240 3456 Tel: 01707 394444 Tel: +353 1 862 0709
Web: www.everbuild.co.uk Web: www.sika.co.uk Web: www.sika.ie
Twitter: @everbuild Twitter: @SikaLimited Twitter: @SikaIreland
EVERBUILDEVERCRYLONECOAT-en-GBEVER-(03-2018)-1-1.pdf
Product Data Sheet

020915159000000001
3/3

Manual Everbuild Evercryl One Coat 15341

Uploaded by

Copyright:

Available Formats

Manual Everbuild Evercryl One Coat 15341

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual Everbuild Evercryl One Coat 15341

Uploaded by

Copyright:

Available Formats

PRODUCT DATA SHEET

EVERBUILD® EVERCRYL® ONE COAT

PRODUCT DESCRIPTION USES

Curing Method Via solvent loss and phys-

Product Data Sheet

APPLICATION INSTRUCTIONS APPLICATION

SUBSTRATE PREPARATION Follow all safety pre-cautions identified on label,

ECOLOGY, HEALTH AND SAFETY

Product Data Sheet

EVERBUILD BUILDING PRODUCTS LTD SIKA LIMITED SIKA IRELAND LIMITED

Product Data Sheet

You might also like