DC-DC Converters PCB Mount type Ordering information

ZUW1R5 1
ZU
2
W 1R5
3 4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW1R50512 ZUW1R50515 ZUW1R51212 ZUW1R51215 ZUW1R52412 ZUW1R52415 ZUW1R54812 ZUW1R54815

MAX OUTPUT WATTAGE[W] 1.56 1.50 1.56 1.50 1.56 1.50 1.56 1.50
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.065 0.050 0.065 0.050 0.065 0.050 0.065 0.050

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW1R50512 ZUW1R50515 ZUW1R51212 ZUW1R51215 ZUW1R52412 ZUW1R52415 ZUW1R54812 ZUW1R54815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
INPUT CURRENT[A] *1 0.466typ 0.448typ 0.183typ 0.176typ 0.092typ 0.088typ 0.046typ 0.044typ
EFFICIENCY[%] *1 67typ 67typ 71typ 71typ 71typ 71typ 71typ 71typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.065 0.050 0.065 0.050 0.065 0.050 0.065 0.050
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
ZU/ZT LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] -20 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 27.5X7X18mm (WXHXD) / 10g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-18 June 29, 2011

 ZUW1R5
External view

¶Recomended size for

processing PCB
(TOP VIEW)
(19.465)
Outline (1.25)

(0.5)
27.5 (1.25) 2-º1.6
Name plate +V

Size between
6.35 6.35
COM

case pins
17.78
+V
18

IN OUT

17.78
-V

12.7
-V

[0.5]

[0.7]
[0.25]
[0.25]

6.35
6.35
(2.54)
2-A part 2-B part
¶Specification ¶Specification
7 ±0.3

at A part at B part
6.35 8.89 5-º1.5
0.4

0.4
4

[0.25] [0.35]
±0.1
5-º 1 (1.25) (1.25)
8.89 (9.305)
2.5
2.7

11.43 (8.035) 2.5 21.59

1 ±0.1 [0.85]
21.59 (2.955)
¶Weight: 10g or less.
¶Tolerance: ± 0.5 The converter is in contact with the
¶Case material: Brass slanted area of the P.C.B. To keep mm
isolation, adequate wiring on the ¶Dimensions in
mounted side is required. ¶Div.: 0.1inch [inch]

Performance data

¡STATIC CHARACTERISTICS (ZUW1R50515) ¡RISE TIME & FALL TIME (ZUW1R50515:+15V)

ZU/ZT

¡OVERCURRENT CHARACTERISTICS (ZUW1R50515) ¡DERATING CURVE

15
OUTPUT VOLTAGE V

10

(-)Io=100%

0
0.05 0.10 0.15
OUTPUT CURRENT(+) A

June 29, 2011 ZU/ZT-19

 DC-DC Converters PCB Mount type Ordering information

ZUW3 1
ZU
2
W
3
3
4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW30512 ZUW30515 ZUW31212 ZUW31215 ZUW32412 ZUW32415 ZUW34812 ZUW34815

MAX OUTPUT WATTAGE[W] 3.12 3.00 3.12 3.00 3.12 3.00 3.12 3.00
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.13 0.10 0.13 0.10 0.13 0.10 0.13 0.10

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW30512 ZUW30515 ZUW31212 ZUW31215 ZUW32412 ZUW32415 ZUW34812 ZUW34815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
INPUT CURRENT[A] *1 0.891typ 0.857typ 0.351typ 0.338typ 0.176typ 0.169typ 0.087typ 0.083typ
EFFICIENCY[%] *1 70typ 70typ 74typ 74typ 74typ 74typ 75typ 75typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.13 0.10 0.13 0.10 0.13 0.10 0.13 0.10
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
ZU/ZT LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] -20 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 35X7X23mm (WXHXD) / 16g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-20 June 29, 2011

 ZUW3
External view

¶Recomended size for

processing PCB
(TOP VIEW)
35 Outline (1.25) (1.25) 2-º1.6

(0.5)
Name plate +V

Size between
7.62 7.62
+V COM

case pins
22.86
23

22.86
15.24
[0.6]

[0.9]
-V IN OUT -V

(0.3)
7.62

7.62
[0.3]
2-A part 2-B part (3.81)
¶Specification ¶Specification (1.25) 5-º1.5
at A part at B part (1.25)
4 7 ±0.3

6.35 16.51
0.4

0.4
[0.25] [0.65]

(9.245) 2.5 29.21

16.51 5-º 1 ±0.1
2.7

2.5 [1.15]
(2.895) 29.21 ±0.1
1 ¶Weight: 16g or less. The converter is in contact with the
¶Tolerance: ± 0.5 slanted area of the P.C.B. To keep mm
¶Case material: Brass isolation, adequate wiring on the ¶Dimensions in
mounted side is required. ¶Div.: 0.1inch [inch]

Performance data

¡STATIC CHARACTERISTICS (ZUW30515) ¡RISE TIME & FALL TIME (ZUW30515:+15V)

ZU/ZT

¡OVERCURRENT CHARACTERISTICS (ZUW30515) ¡DERATING CURVE

June 29, 2011 ZU/ZT-21

 DC-DC Converters PCB Mount type Ordering information

ZUW6 1
ZU
2
W
3
6
4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW60512 ZUW60515 ZUW61212 ZUW61215 ZUW62412 ZUW62415 ZUW64812 ZUW64815

MAX OUTPUT WATTAGE[W] 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.25 0.20 0.25 0.20 0.25 0.20 0.25 0.20

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW60512 ZUW60515 ZUW61212 ZUW61215 ZUW62412 ZUW62415 ZUW64812 ZUW64815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
INPUT CURRENT[A] *1 1.60typ 1.60typ 0.65typ 0.65typ 0.33typ 0.33typ 0.17typ 0.17typ
EFFICIENCY[%] *1 75typ 75typ 77typ 77typ 77typ 77typ 77typ 77typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.25 0.20 0.25 0.20 0.25 0.20 0.25 0.20
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
ZU/ZT LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] -20 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 44.5X7X28mm (WXHXD) / 25g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-22 June 29, 2011

 ZUW6
External view

¶Recomended size for

processing PCB
(TOP VIEW)
44.5

(0.5)
Outline (1.25) (1.25) 2-º1.6
Name plate +V

Size between
10.16 10.16
+V
COM

case pins
27.94
28

15.24
IN OUT
-V -V

20.32
27.94
[0.8]

[1.1]
15.24
[0.6]

10.16
(3.81)

[0.4]
¶Specification ¶Specification
2-A part 2-B part
at A part at B part
(1.25) (1.25) 5-º1.5
0.4
4 7 ±0.3

6.35 25.4

0.4
[0.25] [1]
2.7

(9.55) 2.5 38.1

25.4 5- º1 ±0.1
2.5
(3.2) 1 ±0.1 [1.5]
38.1
The converter is in contact with the
¶Weight: 25g or less. slanted area of the P.C.B. To keep
¶Tolerance: ± 0.5 isolation, adequate wiring on the ¶Dimensions in mm
¶Case material: Brass mounted side is required. ¶Div.: 0.1inch [inch]

Performance data

¡STATIC CHARACTERISTICS (ZUW60515) ¡RISE TIME & FALL TIME (ZUW60515:+15V)

15 OUTPUT
VOLTAGE (+)Io=100%
(-)Io=100%
OUTPUT VOLTAGE V

RIPPLE mVp-p

10 50

40
ZU/ZT
30
5

Ripple 20

10

0 5 10

INPUT VOLTAGE V

¡OVERCURRENT CHARACTERISTICS (ZUW60515) ¡DERATING CURVE

June 29, 2011 ZU/ZT-23

 DC-DC Converters PCB Mount type Ordering information

ZUW10 1
ZU
2
W
3
10
4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW100512 ZUW100515 ZUW101212 ZUW101215 ZUW102412 ZUW102415 ZUW104812 ZUW104815

MAX OUTPUT WATTAGE[W] 8.4 9.0 10.8 10.5 10.8 10.5 10.8 10.5
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW100512 ZUW100515 ZUW101212 ZUW101215 ZUW102412 ZUW102415 ZUW104812 ZUW104815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
INPUT CURRENT[A] *1 2.24typ 2.40typ 1.12typ 1.09typ 0.56typ 0.55typ 0.28typ 0.28typ
EFFICIENCY[%] *1 75typ 75typ 81typ 81typ 81typ 81typ 81typ 81typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
ZU/ZT LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] -20 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 45X7X35mm (WXHXD) / 40g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-24 June 29, 2011

 ZUW10
External view

¶Recomended size for

processing PCB
45 (TOP VIEW)

(0.5)
Outline (1.25) (1.25) 2-º1.6
Name plate +V

13.97

Size between
+V
COM

case pins
34.29
35

20.32
13.97
IN OUT

[1.35]
34.29
27.94
[1.1]
-V -V

20.32
[0.8]

13.97
[0.55]
2-A part 2-B part ¶Specification (3.18) ¶Specification
at A part at B part
5-º1.5
4 7 ±0.3

0.4

(1.25) (1.25)
6.35
0.4
25.4
[0.25] [1]
2.7

(9.8) 25.4 2.5

(3.45) 5-º1 ±0.1 ±0.1 2.5 38.1
38.1 1 [1.5]

The converter is in contact with the

¶Weight: 40g or less. slanted area of the P.C.B. To keep
¶Tolerance: ± 0.5 isolation, adequate wiring on the ¶Dimensions in mm
¶Case material: Brass mounted side is required. ¶Div.: 0.1inch [inch]

Performance data

¡STATIC CHARACTERISTICS (ZUW100515) ¡RISE TIME & FALL TIME (ZUW100515:+15V)

ZU/ZT

¡OVERCURRENT CHARACTERISTICS (ZUW100515) ¡DERATING CURVE

June 29, 2011 ZU/ZT-25

 DC-DC Converters PCB Mount type Ordering information

ZUW15 1
ZU
2
W
3
15
4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW150512 ZUW150515 ZUW151212 ZUW151215 ZUW152412 ZUW152415 ZUW154812 ZUW154815

MAX OUTPUT WATTAGE[W] 14.4 15.0 15.6 15.0 15.6 15.0 15.6 15.0
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.6 0.5 0.65 0.5 0.65 0.5 0.65 0.5

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW150512 ZUW150515 ZUW151212 ZUW151215 ZUW152412 ZUW152415 ZUW154812 ZUW154815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 75
INPUT CURRENT[A] *1 3.56typ 3.70typ 1.57typ 1.51typ 0.78typ 0.75typ 0.39typ 0.38typ
EFFICIENCY[%] *1 81typ 81typ 83typ 83typ 83typ 83typ 83typ 83typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.60 0.50 0.65 0.50 0.65 0.50 0.65 0.50
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
ZU/ZT OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] 0 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 100max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Internally fixed (TRM pin open),t5% adjustable by external VR
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
PROTECTION OVERVOLTAGE PROTECTION Works at 115 - 140% of rating (Total of +V and -V)
CIRCUIT
REMOTE ON/OFF Between RC and -side of input:short - 1.2V ---output ON, 2.4V - 5.5V(or open)---output OFF, Compatible to TTL
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 45X8.5X50mm (WXHXD) / 55g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-26 June 29, 2011

 ZUW15
External view

¶Recomended size for

45 processing PCB
Name plate (TOP VIEW)
(5) Outline (5)

(5)
+V

(5)

(5)
+V
50

7.62
7-º1.5

[0.2]
5.08

COM

5.08 15.24 5.08

IN OUT
-V
15.24

-V

5.08 [0.3] 7.62

[0.3]
5.08 7.62
RC TRM

[0.2] [0.6]

7.62
(5)
5.08

[0.2]
1
(5) (5)
4 8.5± 0.3

(4.68)

(5)
(4.68)

(5)
1

35.56
note
[1.4]
(4.72) 35.56 7- º 1 ±0.1
(5) (5)

The converter is in contact with the

note)Internal parts slanted area of the P.C.B. To keep
¶Weight: 55g or less. isolation, adequate wiring on the ¶Dimensions in mm
¶Tolerance: ± 0.5 mounted side is required. ¶Div.: 0.2inch [inch]
¶Case material: Aluminum

Performance data

¡STATIC CHARACTERISTICS (ZUW151212) ¡RISE TIME & FALL TIME (ZUW151212:+12V)

ZU/ZT

¡OVERCURRENT CHARACTERISTICS (ZUW151212) ¡DERATING CURVE

June 29, 2011 ZU/ZT-27

 DC-DC Converters PCB Mount type Ordering information

ZUW25 1
ZU
2
W
3
25
4
12
5
12
1Series name
R
2Dual output
3Output wattage
4Input voltage
5Output voltage

MODEL ZUW250512 ZUW250515 ZUW251212 ZUW251215 ZUW252412 ZUW252415 ZUW254812 ZUW254815

MAX OUTPUT WATTAGE[W] 20.2 20.1 25.2 25.5 25.2 25.5 25.2 25.5
VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
DC OUTPUT
CURRENT[A] 0.84 0.67 1.05 0.85 1.05 0.85 1.05 0.85

SPECIFICATIONS Output pins can be connected in series to make a 24V/30V output.

MODEL ZUW250512 ZUW250515 ZUW251212 ZUW251215 ZUW252412 ZUW252415 ZUW254812 ZUW254815
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 75
INPUT CURRENT[A] *1 4.92typ 4.90typ 2.47typ 2.50typ 1.23typ 1.25typ 0.62typ 0.63typ
EFFICIENCY[%] *1 82typ 82typ 85typ 85typ 85typ 85typ 85typ 85typ
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.84 0.67 1.05 0.85 1.05 0.85 1.05 0.85
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
ZU/ZT OUTPUT RIPPLE NOISE[mVp-p] *2 150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV] 0 to +55C 150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV] *3 50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 100max (Minimum input, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Internally fixed (TRM pin open), t5% adjustable by external VR
OUTPUT VOLTAGE SETTING[V] 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
PROTECTION OVERVOLTAGE PROTECTION Works at 115 - 140% of rating (Total of +V and -V)
CIRCUIT
REMOTE ON/OFF Between RC and -side of input:short - 1.2V ---output ON, 2.4V - 5.5V(or open)---output OFF, Compatible to TTL
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, EN60950-1, CSA C22.2 No.60950-1 Complies with IEC60950-1
CASE SIZE/WEIGHT 65X8.5X50mm (WXHXD) / 65g max
OTHERS
COOLING METHOD Convection
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2 Measured by 20MHz oscilloscope.
*3 The drift is a change at 25C of ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
* The output specification is at t12V and t15V.
* Series/Parallel operation with other model is not possible.

ZU/ZT-28 June 29, 2011

 ZUW25
External view

¶Recomended size for

processing PCB
65 (TOP VIEW)
Name plate
(5) Outline (5)

(5)

(5)

(5)
+V
+V 7-º1.5
50

7.62

[0.2]
5.08 15.24 5.08
5.08

IN OUT COM

[0.3]
5.08 [0.3] 7.62
-V
15.24

-V

[0.2] [0.6]
5.08 7.62
RC TRM

7.62
(5)

[0.2]
5.08

(5) (5) 1

(5)

(5)
4 8.5± 0.3

(4.68)
(4.68)

1
55.88
[2.2]
note note
(5) (5)
7-º 1 ±0.1
(4.56) 55.88
The converter is in contact with the
note)Internal parts slanted area of the P.C.B. To keep
¶Weight: 65g or less. isolation, adequate wiring on the ¶Dimensions in mm
¶Tolerance: ± 0.5 mounted side is required. ¶Div.: 0.2inch [inch]
¶Case material: Aluminum

Performance data

¡STATIC CHARACTERISTICS (ZUW251212) ¡RISE TIME & FALL TIME (ZUW251212:+12V)

ZU/ZT

¡OVERCURRENT CHARACTERISTICS (ZUW251212) ¡DERATING CURVE

June 29, 2011 ZU/ZT-29

Powered by TCPDF (www.tcpdf.org)