GRID LOCATION MATERIAL LIST FOR ASSY MK'D :GI BATU HIJAU-ANCHOR Qty : 1 No.

Req
ANCHOR-30 C/2 EL +0.600 Mark Profile Grade Qty. Length
C-15 D60 WASHER 2 3
C-16 D30 S45C 1 600
C-17 NUT30 NUT 2 30
C-18 NUT30 NUT 1 30
2NUT M30
2-WASHER
BOLT LIST FOR ASSEMBLY : ANCHOR-30 Qty : 1 No. Req
Bolt Grade Type QtY. Connected Member
Total 1 Assy 0
Grand Total 0

THREAD
120
D30 x 600

ANCHOR-30 ( C-16 )
480
QUANTITY =72 SET(HOT DIP GVL)
OWNER :

PT. AMMAN MINERAL NUSA TENGGARA

TACK WELD IN 3 POINT CONTRACTOR :

1NUT M30
PT. SIEMENS INDONESIA
MAIN VENDOR :

THREAD
38
FABRICATOR :

ANCHOR-30 - D30 - 1 QTY.REQ'D

PT. ANUGERAH PERKASA KONSTUKSI PLUS
DISCLAIMER : Design copy of this document is under PT. APKPlus property and only use for as stated project. Giving it to other and the use or comunication SIDOARJO
of the contents there of, are prohibited without permission and any damages or miss-use impact are not under responsibility Of PT. APKPlus PROJECT TITLE :
REV DRAWN CHK'D APPD
NO. DATE REVISION DESCRIPTION BY BY BY
REF. DWG. NO. REFERENCE DESCRIPTION GENERAL NOTES GI BATU HIJAU
KSM DKT
MKS IMN - 1. ALL DIMENSIONS AND COORDINATES ARE IN MILLIMETERS UNLESS NOTED OTHERWISE. DETAIL ANCHOR BOLT
KSM DKT
MKS IMN 2. STEEL QUALITY :
Tekla structures

2.1. STEEL MATERIAL ASTM A36 OR JIS G3101 Gr. SS400 OR EQUIVALENT DRAWING TITLE (MARK) :
2.2. MINIMUM TENSILE STRENGTH OF MATERIAL 400 Mpa
2.3. MINIMUM YIELD STRENGHT OF MATERIAL 205 Mpa 150 KV ANCHOR BOLT DETAIL
3. WELDS: AWS D1.1 E70XX 0.7 x THICKNESS OF PLATE
4. ALL STEEL SHALL BE HOT DIP GALVANIZED ASTM-A123
ANCHOR-30X600
DATE : DRAWING NUMBER PAPER SIZE REVISION

27.10.2023 ANCHOR-30 A3