Scribd
Upload
124 views8 pages

Gps Master CLock Manual

This document provides information about Dynatek's GPS master clock system. The system uses GPS signals to synchronize highly accurate time across multiple slave clocks connected via Ethernet. The GPS master clock can communicate time to server or IP-based slave clocks. The system includes a GPS master clock, software utilities, GPS receiver, and RS232-485 converter. The software allows configuration of slave clock IPs, finding devices on the LAN, updating PC time, and monitoring clock statuses. Slave clocks display time using LED displays and connect to the master clock over Ethernet.

Uploaded by

silvia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views8 pages

Gps Master CLock Manual

This document provides information about Dynatek's GPS master clock system. The system uses GPS signals to synchronize highly accurate time across multiple slave clocks connected via Ethernet. The GPS master clock can communicate time to server or IP-based slave clocks. The system includes a GPS master clock, software utilities, GPS receiver, and RS232-485 converter. The software allows configuration of slave clock IPs, finding devices on the LAN, updating PC time, and monitoring clock statuses. Slave clocks display time using LED displays and connect to the master clock over Ethernet.

Uploaded by

silvia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

DYNATEK

MANUAL OF GPS MASTER SLAVE CLOCK

INTRODUCTION :

DYNATEK make ‘GPS MASTER CLOCK ‘ is one of the most user friendly and Highly reliable
microcontroller based GPS CLOCK system. This system offers 16 X 4 LCD Back-lit Display to view all
Connected / disconnected clocks , GPS status.The GPS Clock is designed to provide a accurate time by
synchronizing with Global Position ing Satellite System (GPS). GPS system which contains highly
accurate clock transmits time signals to earth. GPS Receiver picks up these time signals & transmits to
GPS Clock through RS485 converter.GPS Clock communicates satellite time to server or IP based slave
clocks through Ethernet port(TCP/IP).
This system are generally used where the synchronize accurate time is required
such as activities in Power plant, Process Industries ,Engg. industries Clinical Trials centers. Airports,
Railways stations , Broadcasting Media etc.
In absence of satellite signals, Master clock works as a standalone clock using built in high accuracy
RTC with battery backup.

SPECIAL FEATURES :

1) GPS time synchronization to server, any no. of PC through TCIPIP Interface.


2) Multiple Slave Clocks can be connected through LAN network.
3) Built in Real Time Clock.
4) Membrane keypad for programming.
5) LED indication for GPS healthy status.
6) Operating voltage 230 VAC.
7) Time Date Display ( 16 X 4 LCD ).
8) Lithium Battery backup for RTC.
9) Facility for Server /slave clock connectivity status
10) User friendly operation
11) Compact design
DYNATEK
This system consists following items.

i) Gps Master Clock.


ii) Softwear Utility.
iii) GPS receiver
iv) RS232 to 485 convertor.

I) Gps Master Clock : Master Clock is provided with two mode


1) Set Mode 2 ) Log mode

1) “ SET mode” : User can set in built RTC parameter GMT Time Hour , minute and
sec. Date. Dd/mm/yy and weekday.

2) “LOG mode” : User can see status of disconected slave clocks.

ii) Softwear Utility. : This software is provided with


1) I/P Utility
2) Device finder
3) PC time updater.
4) ClockPCclient

1) I/P Utility : This utility is used to configure slave clock net parameter i.e I/P add,sub-net
mask,Gate way and device name.
2) Device finder : This utility is used to configure GPS Master clock net parameter i.e I/P add,
Sub-net mask,Gate way and device name.
3)PCtimeupdater : This utility is used to set server or PC time with Master clock.This utility keeps
in task bar.
4)CLock pc client : This utility is used to Program GPS Master clock.i.e I/P of all slave clock.It can
be used to see the following status
1) Total clocks.
2) Connected clocks.
3) Gps status
4) Each slave online or Offline status.
5) Master clock time.
6) User can set UTC time of GPS MASTER clock.
7) Write and Read I/P add of all slave clocks.
DYNATEK

I/P Utility is used to Configure Slave clock


DYNATEK

Utility is used to Configure Master clock


2
1

3
4
5

1) Search to all connected Master clocks in same “LAN only”


2) Display for conneted clock in the list to change I/P add,
Subnet Mask, Device name.
3) Set new I/P add.
4) Display to set new subnet Mask.
5) Display to set new Gateway
6) Display to set new Device name.
7) “Set” button to programme new I/P.
This utility is used to set server or PC time with GPS Master Clock

1) Status for Connection of Gps Master clock.

2) UTC time sent By Gps Master Clock

3) GPS status Connected or Disconnected

4) Gps Master Clock server I/P

5) Poll interval to sync with Master clock.

6) setting to update PC time with Gps or Master clock RTC


time.

7) Set button to store above settings.


DYNATEK

This utility is used to programmed Master clock device


i.e. slave clock i/p and user can see the whole status
of Gps clock on PC
1

3
4

1) Status of slave clock online / offline.

2) Staus of Master clock connected / disconnected


No. Of Total clocks
Online clocks
Gps status On/ Off.
Master clock device Time.

3) By pressing query button user can get all this data.

4) If GPS receiver fails to send time to Master clock user can


Set inbuilt RTC time of Master clock.

5) User can Read and Write Master Clock device.

6) User can save and load Slave clock list.


DYNATEK

Technical Specifications for Digital Slave Clock

1. Type of Clock : Ethernet based Slave digital clock

2. Time Format : 12/24 Hour Format selectable

3. Display : LED Red Colour seven segment display with long


distance visibility

4. Display Size : 4 inch

5. Display Face : Single face display

6. Visibility : Up to. 70 to 75 Feets.

7. Communication Port : TCPIP Ethernet

8. Adjustment Control : Provision for time setting switches.

9. Power Supply : 230 VAC/50 Hz.

10. Temperature Range : 0 to 60 degree.

11. Mounting : Wall mountl

12. Enclosure : MS Black Power coated

13. Size : 660mm X185mm X 65mm

14. Display Format : HH:MM:SS

You might also like