PMD2

VERY HIGH PERFORMANCE MULTI-ZONE METAL DETECTOR

• Very High Threat Detection Uniformity

over the whole transit area
• Very High Tolerance to personal metal
items (Low Nuisance Alarm Rate)
• Exceptional Immunity
to Environmental Interference
• Highly Visible Displays - Single or
Multiple Location of weapons in transit
via vertical illuminated display
• Fast programming through an exclusive
Chip Card System
• Local or Remote Programming
with networking capabilities

FOR FIXED AND

CHIP CARD SYSTEM:
AUTOMATIC CALIBRATION
OF SECURITY STANDARDS PORTABLE USE

ADVANCED TECHNOLOGY
FOR ENHANCED WEAPONS LOCATION

PMD2, acronym for Programmable Metal Detector, is the most

advanced CEIA application with an international patent of its
own. It generates an electromagnetic scanning field for the
detection of metallic weapons inside a monitored passage.
AVAILABLE IN PANEL
OR COLUMN VERSION
Due to this technology, the PMD2 Metal Detector accurately
pinpoints location of weapons on individuals during transit result-
ing in accelerated search process.

w w w . c eia . n e t

CEIA-Security-Metal-Detectors_brochure_2008-edition.indd 2 01/10/2008 18.12.24

 PMD2 VERY HIGH PERFORMANCE MULTI-ZONE METAL DETECTOR

A “height on person” display actually indicates, the minimum number of alarms due to per-
by means of illuminated LED’s, the position of sonal metal items.
UNDER THE ALARM THRESHOLD
the weapon. The location zones are not fixed, The PMD2 is available in panel (PMD2/PTZ)
as in the case of metal detectors with multiple or column (PMD2/ENZ) version. An outdoor * Small metal mass
receiver-transmitter coils, but variable and column version, PMD2/EWZ, is offered with an **** Medium metal mass
continuous to achieve optimum resolution. IP65 degree of protection. The PMD2 is manu- OVER THE ALARM THRESHOLD
The PMD2 Metal Detector is recommended factured using the most advanced electronics
** Medium metal mass
for use in all high security applications where technology, conforming to ISO 9001 Quality **** Large metal mass
the maximum degree of protection is required, Control Standard procedures.
combined with a substantial flow of people and
GREEN AND RED METERING SIGNALS
PROPORTIONAL TO THE METAL MASS DETECTED
MAIN FEATURES CERTIFICATION AND CONFORMITY
DETECTION OF MAGNETIC, NON-MAGNETIC AND Complies with Regulations relating to pacemakers, DIMENSIONS
MIXED ALLOY METAL WEAPONS defibrillators or other vital support systems,
HIGH TRANSIT FLOW-RATE thanks to the pregnant women and magnetic storage media (floppy COLUMN MODEL (PMD2/ENZ - PMD2/EWZ)
discrimination of personal metal items disks, audio cassettes, video cassettes and similar)
IMMEDIATE SELECTION OF INTERNATIONAL Conforms to the current International Security
SECURITY STANDARDS Standards for Walk-Through Metal Detectors
PROGRAMMABLE OPERATION controlled by Complies with EC Regulations and International
microprocessor Standards relating to Electrical Safety and
PROGRAMMING via built-in keypad and display Electromagnetic Compatibility (EMC)
or RS-232 serial connection to Remote Control Unit
ACCESSORIES / OPTIONS

2240 mm
(RCU2), a PC or a computer network

2040 mm
CHIP CARD SYSTEM: automatic calibration of
720/820 mm
PROGRAMMING ACCESS protected by both a
mechanical lock and two alphanumeric passwords Security Levels
HIGH DETECTION SPEED: up to 15 m/s (45 ft/s) RCU2: the console
EXCEPTIONAL IMMUNITY to electromagnetic and provides complete remote
mechanical interference control of CEIA Walk-
Through Metal Detector
MULTIPLE INSTALLATIONS: automatic
functions
synchronisation between two or more metal
detectors with a reciprocal distance of down to 5 cm MDNC-1: Ethernet network interface for CEIA Metal
(2”) without the use of cables Detectors 1065/1165 mm
HIGH-INTEGRATION PROFESSIONAL ELECTRONICS MBSU-1 Unit is a portable 365 mm
and maximum reliability device designed to supply PANEL MODEL (PMD2/PTZ)
CONTROL UNIT incorporated into the detector CEIA Metal Detectors in
NO INITIAL OR PERIODIC CALIBRATION outdoor applications or in
situations where mains
EASY MAINTENANCE: modular control unit for a
power supply is
rapid replacement
unavailable
Colour: light grey RAL 7040
METAL DETECTOR
INSTALLATION DATA DIVESTING TABLE

POWER SUPPLY: 115 / 230 VAC, ±15%, 50 ÷ 60 Hz,

2255 mm
30 VA max 720/820 mm
2050 mm

EXTERNAL INTERFACE: RS-232C for connection to a

Remote Control Unit (RCU2), a terminal, a computer,
an external modem or other CEIA Metal Detectors
RRU (Remote Relay Unit)
PROTECTION Indoor Model: IP20 - IEC529
PHOTOCELL TRANSIT
DEGREE Outdoor Model: IP65 - IEC529
COUNTER and automatic
OPERATING TEMPERATURE: -20°C to +70°C alarm rate calculation
STORAGE TEMPERATURE: -35°C to +70°C
RELATIVE HUMIDITY: 0 to 95% (without condensation) OUTDOOR VERSION, waterproof degree IP65
EMERGENCY BATTERIES 835/935 mm 660 mm
ALARM MODES
MD SCOPE: software for oscilloscope simulation and
VISIBLE Multi-zone display bar for “height
SIGNALS
terminal operation on CEIA MDs APPLICATION FIELDS
on person” localization
STABILIZING PLATES
High intensity display • AMUSEMENT PARKS • INDUSTRY (SECURITY)
(only for column models)
Green and red metering signals • COURTS • NIGHT CLUBS
proportional to the mass of the • CRUISE SHIPS • NUCLEAR FACILITIES
object detected TRANSPORT CASE • DATA PROCESSING (SECURITY)
AUDIBLE High acoustic intensity alarm signal FOR CEIA ELLIPTIC CENTERS (EDP) • PUBLIC EVENTS
SIGNALS METAL DETECTOR GATE • EMBASSIES • PUBLIC OFFICES
Volume and tone of alarm signal
• HOTELS
can be programmed

Zona Industriale 54/G, 52041 Viciomaggio - Arezzo (ITALY)

Tel.: +39 0575 4181 Fax: +39 0575 418298 E-mail: [email protected]
DP021GB60K13v2 - 35574

www.ceia.net CEIA reserves the right to make changes, at any moment and without notice, to the models (including
programming), their accessories and options, to the prices and conditions of sale

CEIA-Security-Metal-Detectors_brochure_2008-edition.indd 1 01/10/2008 18.12.17