T ools

Category
Object-Oriented Organization &
Tools Storage & Tools System Sets
Hand Sockets & Accessories
(1/4”, 3/8”, 1/2”, 3/4” , 1” Drive & Combination Set)

Impact Sockets & Accessories

(1/4”, 3/8”, 1/2”, 3/4”, 1”, 1- 1/2”, 2- 1/2”, 3- 1/2” Drive)

Torque Control & Multipliers

Wrenches

Pliers

Pipe Tools

Screwdrivers & Hex Key & Bits

Electronic & Electrical

Hammers & Striking Tools

Workshop Tools
(Puller, Riveter, Measuring tool, Work light, Cutting)

Pneumatic Tools
Automotive Tools
(Engine, Undercar, Body, General Series)

ST Series Tools
22
36
120
224
266
288
328
346
362
410
450
460
486
512
640 starter
 KING TONY engaged in supplying
professional tools for more than 33 years,
we always focused on supplying quality tools
Vision
to our customers to make sure the quality satisfies
the working requirement. To finish a professional job is a
dream and target for every mechanic, and to finish it more
easily and perfectly is even a better achievement. Thus, every
mechanic can really enjoy their work. From this motive we have
a goal that is to make every mechanic know, when they use KING
TONY professional tools, they will quickly, perfectly and easily finish their
work. They may feel more of confidence and enjoy what they do. To
achieve this goal, we will continue to supply tools that is easy to
take, easy to use, save time and strength. Our future vision is
to tell every mechanic who uses KING TONY tools “enjoy
your work”, which contains the meaning to use good
tools to do good jobs and have real enjoyment in
the process. Why not find your enjoyment from
your job, take KING TONY professional tools
and you will start to experience it.

In 1976, amidst a lack of capital and technology

in Taiwan, Mr. Charles Lai & Mr. Tony Lin founded a Mr. Lai & Mr. Lin found their new direction; making
hot forge factory specializing in making hand tools professional quality hand tools built to compete with
for the DIY market. Eight years later, many other the best in the world. They set their standards high
companies had followed their lead and although and in the years since, have consistently exceeded
the market grew quickly, quality suffered. With the requirements of the world’s toughest standards.
pricing, costs and quality nearing a state of chaos KING TONY tools don’t just meet the DIN (German)
it became clear to KING TONY’s founders that they standard and the ANSI (U.S.A.) standard, they
needed to seek a new direction. routinely exceed them. In fact, we test every torque
make to a standard 30% higher than that prescribed
by DIN and our pneumatic impact tools to a 50%
higher standard. That’s true commitment to quality!
To further underscore our determination to compete
with the best in the world we have achieved
certification with ISO on three separate standards.
First, in January 1998, ISO 9002, followed by ISO
9001 and more recently we have qualified for the You might sense that King Tony Tools is about much
environmental safety standard, ISO 14001. We more than a world-class tool. The ideals of KING TONY’s
believe that is our responsibility to the world and we management are fulfilled daily by our hundreds of
will always dedicate to reduce the harm to the earth employee’s at our branches and offices around the
during our manufacturing process in the future. world. You will find KING TONY Tools and its branches
in: France, Germany, Spain, Belgium, Mexico, U.S.A.,
China. Each of our local branch offices is tasked with
insuring that you, our customer, are happy not just with

C
our quality but with the experience of being a KING

ompany TONY customer.

Profile
2
 BE INSPIRED &
1984 Hot Forge
MILESTONES
1989 Tougher Design

1990 Color Code Stripe

1993 Super Standard

1996 Close Tolerance

1999 VDE Safety Grip

2007 Masters of Torque

2012 Dual Colors Stripe

2015 Trustworthy Brand
2017 World Distribution

3
 Branches
: d u s t r i a l La
● Mexico :
a In
Co l . , Z o n c o
i q u e No r d
, No . 1 5 - A, . D e M e x i
● France : Z IR é p u b l Av S a n J o
s e i a , Ed o
s , in e p a n t
im p r i m e u r
P . 5 4 1 8 7 Ti a
3 R u e d e s c e P re s a , C .
ie r s , F r a n : ,
● China
8 6 0 0 0 P o
it R d .
a 5 J in g m a o J ia n g s u , C
h in a
2 3 Co s l a d i n g , No . 2 8
● Spain : a jo 4 , 2 8 8 No . 3 B u i l
d z h o u ,
B h o u , S u
Al c a r r i a , 7 a rk o f S u z

n
a l P
Ca l l e d e l In d u s t r i a

o
t B e lg iu m

t i
● Belgiu m : An d e r l e c h

u
, 1 0 7 0

b
e m
a rd P a e p s

r i
1 6 B o u le v

s t
Di NY
K IN G T O
Di s t r i b u t i o n
Honduras Canada
EI Salvador Mexico U.S.A.
Guatemala
Costa Rica Aruba
Colombia Dominican Republic
Ecuador Panama
Peru Uruguay
Chile
Bolivia Brazil
Argentina Paraguay

United Kingdom
Sweden Finland
Norway
Ireland Estonia
Denmark
Netherlands Latvia Russia
Germany Lithuania
Belgium
Belarus
Portugal Poland Slovakia
France Kazakhstan
Spain Czech
Hungary Ukraine
Japan
Morocco Croatia
Serbia Moldova Korea
Tunisia Albania Kirghizia
Italy Bulgaria
Algeria
Greece Azerbaijan
Libya
Egypt
Cyprus Iran China Taiwan
Senegal Syria
Sierra Leone Lebanon
Guinea Jordan Philippines
Pakistan
Ivory Coast Israel Kuwait Myanmar
Burkina Faso
Liberia Bahrain Bangladesh
Ghana Qatar
Niger Saudi Arabia India Thailand
Benin Cambodia
Togo
Nigeria U.A.E. Oman Vietnam
Central African Republic Yemen P.N.G.
Gabon Malaysia
Sri Lanka Indonesia Polynesia
Congo
Uganda Singapore
Equatorial Guinea Maldives
Ethiopia Australia
Kenya
Angola Tanzania
Zambia Mozambique
Namibia Zimbabwe New Zealand
Botswana
Swaziland
Lesotho
South Africa
Maritius

4
 Create to improve,
protect where we live,
TAIWAN balance environment
and human.
EXCELLENCE

NATIONAL
BRAND
YUSHAN
TAIWAN
AWARD

l
SUPERIOR

t u a
superior
BRANDS

c
I y
brands

e l l e t
n
P
t
r o pPe r
r toy p e r
K
New Registered Trademark
ING TONY
GLOBAL
Please recognize KING TONY’s
official registered trademark.
Metric size

Austria, Belarus, Belgium, Bulgaria,

Croatia, Czech, Denmark, Estonia,
Finland, France, Germany, Greece,
Imperial size

Bangladesh, Cambodia,
Hungary, Italy, Ireland, Latvia, China, India, Indonesia,
Lithuania, Luxembourg, Malta, Japan, Kazakhstan, Laos,
Moldova, Netherlands, Norway Malaysia, Myanmar, North
U.S.A. Portugal, Poland, România, Korea, Pakistan, Singapore,
Russian Federation, Serbia, South Korea, Taiwan,
Slovakia, Slovenia , Spain, Sweden, Thailand, Vietnam
Switzerland, Turkey, Ukraine, United
Kingdom, United Kingdom

Bahrain, Cyprus,
Algeria, Angola, Bénin, Iran, Israel,
Botswana, Burkina Faso, Jordan, Kuwait,
Cameroon, Central, Lebanon,
Congo Republic, Chad Oman, Qatar,
African Republic, Egypt, Saudi Arabia,
Brazil, Bolivia, Ethiopia, Equatorial Syria, U.A.E.,
Colombia, Guinea, Gabon, Yemen
Costa Rica, Ghana, Guinea-Bissau,
Chile, Ivory Coast, Kenya,
Dominican, Libya, Mauritius, Mali,
Ecuador,El Salvador Mauritanica, Morocco, Australia,
Panama, Mozambique, Namibia, French Polynesia,
Republic, Niger, Nigeria, South New Caledonia
Guatemala, Africa, Sénégal, Sierra New Guinea,
Mexico, Peru Leone, Swaziland, New Zealand,
Tanzania, Togo, Tunisia Papua,
Zambia Solomon Islands

Trademark Worldwide Registration

5
 02
01 Gauge ment
e
measthue rscrew tap to
Measure L I tolerance of
er meet LEV rd
E
Spe ctromet ents DIN s ta n d a

07
terial elem
Metal ma
analysis

08 Precise
cutting e
machin oth section
mo
Cut for a s
Mounting
press e
machin x tiny and
fi
In order to l workpiece
mult il a te ra

10
09
Micro- ss
hardne
testerthe change of
Grindingg& Analyzegraphy after heat ce of
metallo nt and the differene and
polishine treatmess between surfac
machsuinrface of workpiece hardne location
central

15
Make arer for
r and cle
smoothe ervation
s
further ob

16 Torqueh
wrenc
tester IN ISO & ASME
Microe- D
Follow the test torque toleran
ce
torqu standard to
of 20%, 60
by 3 pointsax. scale
% a n d
testeructs with smaller 100% of m
Test prod h as bits for their
c
torque su
dura b il it y

17

I n
Eq
s
u
p
i
e
p
c
m
t i
e
o
n
n
t
Vision ring
measu e
machinparts for difficult
Measuore
angle r in
space
the narro
w

6
 04
03
Salt-water
spray testeirronmental
ll nv
Rockweess 48 HRs e test to check
simu la ti o n
from
hardnr product’s
durability
testeproduct’s being rus
ty

05
Test the ING
to meet K
hardness lity standard
a
TONY qu

06 Thickness
test of
plating hemical to
ial c
Apply speckness of plating
Torqur e ch e c k th ic
it reaches
KING
testreetest to check the and ensuretandard
TONY ‘s s
Fractu ure
ue to ens
max. torq IN standard
fD
excess o

12
11 Tension
tester rce of
Environm ental g fo
test Test pullin ecially for
simulatieornatu re produc t e s p
iece acco
rding
of temp ity joint wo rk p
ndard
& humid re from 70 °C ~ - 20°C to DIN sta

13
peratu
Simulate tem t reaction and durability
to test pr od uc perature
hi le ob vi ou s change of tem
w

14 Hammering
test
Pliers machine me of striking
class ure e r a
eti
Test the lifnd security of the ft
n sha
measr
m
h a m
o f h a m m er& woode
joint
teste ing force and
utt
Test the c
dura b il it y

19
18 Insulated
test
rton
Ca
bustin g machpinroeducts are
Ensure voltage
strength insulated
under the
teste r of carton 1000V
e strength
Test th od
assure go
in order touality
packing q

7
 02
01
Lathion g rnal
e ckets exte
Hot fokerg
shape an
d
Control s nd the roundness
diameter
a
Heat to ta bers to improve
fi
complete

07
durabilit y

08
Markingensions, material
Heat ent Stamp dimfacturer
treatm product and manu
Enhance e to achieve
nc
performa ess
a rd n
max. h

10
09 Sand
blast oxide lay
er and
Remove rface coating
su
Vibratinxgide layer and burrs for
o
Remove rface coating
su

15
b u rr s fo r

P
Rubber

n
strip bly

rod u c t i o assembi-colors rubber

s tr
disti
ip
n
e
g
d
u
e s
is h
e
The uniquign and is easy to l
m etric and im
peria

s
dimension

Pr o c e s
8
 04
03 Machining
(CNC) plicated process
m
Finish co roduct the
re p
Drilling to ens u
e prec is io n
hole on th
in
Drilling p ffer socket
e to o
groov

05
ty o p e ration
safe

06
De-burreinbgurrs and
g&
Puncchhin ng
Remove thn square hole
chamfer o
Broaaccuratei dimension
Make
anner
for the sp

12
11
Platinrogme plated
Nickel-ch roduct from
to protect nd improve finish
p
Grindoxiidne g
layer and e
nsure corrosion
a
Remove undness for follow
sockets rorecision

13
process p

14
Phosphate
Silk g surenakse impact socketsorrwoesaiorn
printin i-colors silk Inc nd preven
tc
resistant a the durability
ue b to improve
The uniq sign and is
e
printing d tinguish metric
dis
easy to al dimension
ri
and impe

9
 Exhibitions
xhibitions

W e visited customers every year to exchange ideas and collect market information and
trends. Meanwhile, we attend major exhibitions around the world to increase our brand
visibility and reputation.

We are selling to more than 130 countries. We also build branches around the world.
Customers can easily acquire service from local distributors in their countries.

10
s W e build professional brand image for
exhibitions. Visitors can experience
KING TONY’s excellent quality and
understand our brand vision.

11
 Sponsor
Sponsor &
&
P artnership

hen using KING TONY tools, you can quickly, easily, and perfectly finish your works.
W You will feel more confident and joyful about what you do.

We sponsor our customers to promote KING TONY in Motorsports around the world.

12
K
ING TONY focuses on international brand marketing.
We raise brand exposure & professional image to strengthen our position in the market.

Partnership

13
 B
BTarget Users
randing to
randin
Targe

14
 ng to
et Users
K ING TONY has been specializing
in professional tools and serving as
the “tool expert with the best service”.
In addition to create effective marketing
strategies with the concept of “customer
first” in mind in the future.

15
 B
randing to
Target Users

16
17
 A dvertising
materials

ZS105
ZS104 Size: 11 x 7.5 cm ZS106 ZS107
Size: 11.5 x 9 cm Leather Wallet Size: 43 x 32 x 9 cm
Leather Male Wallet Size: 40 x 35 x 8 cm
For Business Card Briefcase (Nylon) Briefcase (Leather)

ZS408 ZS512
ZS402 ZS403 ZS405 Ruler 30 cm Note Book
Ball-Bearing Pen Ballpoint Pen Ball-Bearing Pen

ZS411
Size: 530x367x2mm ZS510 ZS306
Mat Notepaper Size: 18x18x0.3cm
Mouse Pad
ZS409 ZS410
Size: 310x220mm Size: 310x495x17mm
A4 L Shape Clear File A4 Clear File

Chest
girth
Overall (cm)
ZS141 - S 44"
ZS141 - M 46"
ZS141 - L 48"
ZS141 - XL 50"
ZS141 - 2L 52"
ZS141 - 3L 54"
Windbreaker Jacket

Shoulder Chest
width girth
Overall (inch) (inch)
Front Back
ZS111 - M 17" 41"
ZS111 - L 18" 43"
ZS111 - XL 19" 45"
ZS111 - 2L 20" 47"
Waist. Hip
(inch) (inch) ZS111 - 3L 21" 49"
Polo Shirt
ZS109 - L 34" 48"
ZS109 - XL 36" 50" Shoulder Chest
width girth
ZS109 - 2L 38" 52" Overall (inch) (inch) ZS142W
ZS109 - 3L 41" 54"
ZS111A - S 14" 36"
Work Clothing Shoulder Chest
ZS111A - M 15" 37" ZS142B width girth
ZS111A - L 16" 39" (inch) (inch)
ZS111A - XL 17" 41" S 16" 38"
Waist. Hip ZS111A - 2L 18" 42" M 17" 40"
Overall (inch) (inch) ZS111A - 3L 19" 44" L 18" 42"
Polo Shirt XL 18-1/2" 44"
ZS112 - L 36" 44"
2L 19" 46"
ZS112 - XL 40" 48" ZS142G T-shirt
ZS112 - 2L 44" 52"
ZS112 - 3L 48" 56"
Work Clothing

18
 ZS110
Work Hat

ZS116
ZS108 ZS520 ZS521 Size: 68x8K
Leather Belt (Male) Necktie Necktie Clip Golf Umbrella

ZS516 ZS539 ZS511

Opener ZS119 ZS120-S
Corkscrew Paper Cup Personal Cooler Bag
Handbag

ZS530
ZS524 Key Ring ZS533
ZS529 ZS522 Key Ring Key Ring
Paper Clip Of Key Ring
Dr.Q Toy Figure

210 cm
38 cm

ADSTK21KT 99 x 45 cm
ADFLAG1 ADSTK22KT 50.6 x 22.6 cm
Size: 930 x 1430 mm ADSTK23KT 26.4 x 4.2 cm
ADFLAG Big Flag
Size: 25.4 x 16 cm Sticker
Small Flag

ADFLAG2
Size: 210 x 60 cm
Outdoor Flag

ADSTK-C1 ADSTK-H1 ADCV-01 ADCV-02

ø - 250 mm ø - 250 mm Size: 300 x 80 cm Size: 300 x 80 cm
Sticker Sticker Canvas Strip Canvas Strip

19
 T ool
Display
D i sp l a y H o o k
87301- 494A 4" x Ø 4 mm
87301- 496A 6" x Ø 5.2 mm
87301- 498A 8" x Ø 5.2 mm
87301- 499A 9" x Ø 8 mm

8 7 2 0 3
D i sp l a y B o a r d 8 7 1 5 2
Wall hanging type 30 PC. hook included D i sp l a y S t a n d
8 7 3 0 1 Overall Size -W 725 x D 14 x H 900 mm Overall Size -W400 x D230 x H470 mm
D i sp l a y S t a n d Weight - 11.50 Kg / Cuft - 0.328 Weight - 1.20 Kg / Cuft - 1.53
Overall Size -
W 950 x D 500 x H 2230 mm
Attachment-
1 PC. lamp case
2 PC. angled steel frame
2 PC. shelve
4 PC. steel plate with hole
40 PC. hooks
Weight - 50.32 Kg / Cuft - 8.4
mm
274

1800 mm
mm
282
mm
302
mm
322
mm
185

600 mm

9 1 4 3 1 P .4 5 4
8 7 1 5 3 H a m m e r H o o k
D i sp l a y R a ck f o r To r q u e Wr e n ch 8 7 1 6 0 P .4 7 5 Overall Size -
Overall Size - D i sp l a y R a ck W 40 x D 210 x H 240 mm
W 330 x D 255 x H 475 mm Overall Size -
Weight - 411.6 g / Cuft - 0.072
Weight - 1.23 Kg / Cuft - 1.41 W 400 x D 600 x H 2070 mm
Weight - - 15.5Kg / Cuft - 1.6

9 1 4 3 2
S t e e l R a ck H o o k
Idea for hanging display &
presenting tool set 9 TE4 1 P .2 4 0 H a n g e rs
230mm maximum depth H o o k f o r To r q u e Ext e n si o n B a r Individual pack
5kg maximum tool weight Total Length - 311mm Housing material - PP
(heavier & longer items, you Weight - 196.4 g Lock pin is optional
can put 2 PC. to hold) Groove capacity: 22 mm

8 7 1 0 5 / 8 7 1 0 7 / 8 7 1 1 0 / 8 7 1 1 1
S rc e w d r i ve r S h e l f
Overall Size -
87105-W 595 x D 240 x H 210 mm
Weight - 3.40 Kg Cuft - 1.97
87107-W 383 x D 136 x H 130 mm
Weight - 0.86 Kg 8 7 1 0 4 P .3 7 4
87110-W 420 x D 240 x H 210 mm S rc e w d r i ve r S h e l f
Overall Size -
Weight - 2.50 Kg Cuft - 1.5
W 325 x D 205 x H 270 mm
87111-W 655 x D 240 x H 210 mm
Weight - 1.20 Kg
Weight - 3.80 Kg Cuft - 2.2
Cuft - 0.3
Reference:
8 7 1 0 5 (3 1 4 1 6 M R P .3 7 3 )
(3 1 5 1 6 M R P .3 7 3 )
8 7 1 0 7 (3 1 4 1 9 M R P .4 1 7 )
8 7 1 1 0 (3 1 5 1 2 M R P .3 7 3 )
8 7 1 1 1 (3 1 5 1 9 M R P .3 7 3 )

20
 8 7 1 1 6 P .3 4 0
D i sp l a y S t a n d f o r G r i p P l i e r s 8 7 1 1 8 P .4 6 5
Capacity: 12 PC. D i sp l a y S t a n d f o r
Size: 243 x 205 x 200 mm M e a su r i n g Ta p e 8 7 1 1 9 P .4 0 2
Capacity: 12 PC. D i sp l a y S t a n d f o r L Typ e H e x K e y
For all measuring tape Wr e n ch S e t
(79093 / 79094 Series) Capacity : 12 sets
Size: 309 x 237 x 189mm For Allen, Spline, Ball, torx with hole
Size: 393 x 154 x 345 mm

8 7 1 1 B
M e ta l H o ld e r
Overall Size -
W 600 x D 240 x H 60 mm
Weight - 6.20 Kg
Cuft - 0.9
8 7 3 5 2 P .3 8 3 Reference:
8 7 1 4 0 1 0 9 0 P R 1 P .4 5 6
P a p e r D i sp l a y S t a n d f o r S o cke t S e t B i t D i sp l a y B o x
Size: 468 x 446 x 250mm Overall Size -
W 318 x D 235 x H 183 mm
Weight - 1.30 Kg
Cuft - 0.4

8 7 1 0 2 / 8 7 1 0 3
S o cke t S h e lf
Width can be adjustable to display Reference:
8 7 1 0 8 P .4 5 7 multiple socket series
M e t a l H o l d e r f o r F l a t Ch i se l 9 TE3 1 P .5 1 1 3 5 6 8 M R P .1 6 3
M a g n e t i c H o l d e r f o r Im p a ct Wr e n ch Single serial socket size tab attached
4 0 7 2 M R / 4 5 7 2 M R P .1 6 6
Overall Size - Overall Size -
4 0 7 2 S R / 4 5 7 2 S R P .1 6 6
W 101 x D 101.5 x H 394 mm W 415 x D 336 x H 320 mm
4 0 6 6 M R / 4 5 6 6 M R P .1 6 9
Weight -1.30 Kg Weight - 6.85 Kg(87102) /
4 0 6 6 S R P .1 6 9
6.37 kg(87103) Cuft - 0.67
4 4 7 2 M P /4 4 7 2 S P P .2 3 2
4 4 6 6 M P /4 4 6 6 S P P .2 3 2

8 7 1 0 6 P .5 1 1
Im p a ct Wr e n ch D i sp l a y S t a n d
Applied for 1/2" DR. & 3/4" DR. impact
wrench Steel plate with chrome plated 9 TE2 1 P .3 2 6
9 1 4 5 1 - 0 1 A(1/4”x19 BSPT) air hose adapter attached T- t yp e Wr e n ch H a n g e r
9 1 4 5 1 - 0 1 B (1/4”x18 NPT) Overall length - 120 mm
Im p a ct Wr e n ch H o o k Weight - 533g
Reference: P . 5 1 1

21
 TOOLS STORAGE &
TOOLS SYSTEM SETS
▪ Object-Oriented Organization

▪ Tools Trolley

▪ Workbench

▪ Tools Chest

▪ Tools Box

▪ Handy Case

▪ Work Chair & Storage Case

▪ Tools Trolley Set

▪ Tools Chest Set

▪ Tools Box Set

▪ Tools Set Content

22
23
 Object-Oriented
Organization
9

8
1
4 7

10

2 5
6

1 2 3 4 5

5 Flexible / adjustable Ball bearing slides Steel panel for tool Concealed handle Hidden knob
shelves storage

6 7 8 9 10 30
Kg

Double volume Front centralized locks Stainless steel work Cupboard with gas The drawer with
surface spring capacity 30kg

24
 Object-Oriented
Organization
87D11X01SA-KG
Overall: 4885 x 460 x 2000 mm Stainless Steel
Kg 445.25 CUFT 116.75

87D11X01SA-KB
Overall: 4885 x 460 x 2000 mm
Stainless Steel
Kg 445.25 CUFT 116.75

25
 Object-Oriented
Organization
87D11X02SA-KG
Overall: 4235 x 460 x 2000 mm Stainless Steel
Kg 376.20 CUFT 100.30

87D11X02SA-KB
Stainless Steel
Overall: 4235 x 460 x 2000 mm
Kg 376.20 CUFT 100.30

26
 Object-Oriented
Organization
87D11X03A-KG Wooden Top
Overall: 2955 x 460 x 2000 mm
Kg 257.65 CUFT 71.39

87D11X03A-KB
Overall: 2955 x 460 x 2000 mm Wooden Top
Kg 257.65 CUFT 71.39

27
 Object-Oriented
Organization
87D11X04A-KG 87D11X04A-KB
Overall: 2640 x 460 x 2000 mm Wooden Top Overall: 2640 x 460 x 2000 mm Wooden Top
Kg 244.65 CUFT 64.91 Kg 244.65 CUFT 64.91

87D11X05A-KG 87D11X05A-KB
Overall: 2275 x 460 x 2000 mm Wooden Top Overall: 2275 x 460 x 2000 mm Wooden Top
Kg 197.60 CUFT 51.90 Kg 197.60 CUFT 51.90

28
 Object-Oriented
Organization
87D11A-KG
Overall: 3920 x 460 x 2000 mm Wooden Top
Kg 343.2 CUFT 89.42

87D11A-KB
Overall: 3920 x 460 x 2000 mm Wooden Top
Kg 343.2 CUFT 89.42

29
 Object-Oriented
Organization
accessories
87D11-06A-G P.33
87D11-06A-B P.33 87D11-07A-G P.33
87D11-01A-KG P.31 87D11-07A-B P.33
87D11-01A-KB P.31
87D11-18A-KG P.31 87D11-02A-KG P.30
87D11-17A-KG P.31
87D11-18A-KB P.31 87D11-02A-KB P.30
87D11-17A-KB P.31

87D11-11A-KG P.33
87D11-03A-KG P.32
87D11-11A-KB P.33
87D11-03A-KB P.32
87D11-04A-KG P.32
87D11-04A-KB P.32
87D11-05A-KG P.32 87D11-12A-KG P.33
87D11-05A-KB P.32 87D11-12A-KB P.33 87D11-08SA P.34
87D11-09SA P.34

Tall Cabinet
87D11-02A-KG 87D11-02A-KB

87D11-02A-KB

87D11-02A-KG 87D11-02A-KB
Overall Kg
KT NO. CUFT
(mm)
87D11-02A-KG
600 x 460 x 2000 53 9.28
87D11-02A-KB
30
Tall Cabinet
87D11-18A-KG
87D11-18A-KB

87D11-18A-KG 87D11-18A-KB

Overall Kg
KT NO. CUFT
(mm)
87D11-18A-KG
915 x 460 x 2000 75 12.72
87D11-18A-KB

Wall Cabinet
87D11-01A-KG 87D11-01A-KB
87D11-17A-KG 87D11-17A-KB

87D11-01A-KG 87D11-01A-KB

87D11-17A-KG 87D11-17A-KB

Overall Kg
KT NO. CUFT
(mm)
87D11-01A-KG
9.5
87D11-01A-KB
680 x 280 x 350 3.72
87D11-17A-KG
9.5
87D11-17A-KB

31
 Opened Door Cabinet
87D11-03A-KG
87D11-03A-KB

87D11-03A-KG 87D11-03A-KB

Overall Kg
KT NO. CUFT
(mm)
87D11-03A-KG
680 x 460 x 910 30 13.67
87D11-03A-KB

Drawer Cabinet
87D11-04A-KG 87D11-05A-KG
87D11-04A-KB 87D11-05A-KB

87D11-04A-KG 87D11-04A-KB 87D11-05A-KG 87D11-05A-KB

Overall Kg
KT NO. Spec. CUFT
(mm)
87D11-04A-KG 4
42
87D11-04A-KB Drawer
680 x 460 x 910 13.67
87D11-05A-KG 5
45
87D11-05A-KB Drawer

32
Trash Bin With Paper Holder 5 Drawers Cabinet
87D11-11A-KG 87D11-12A-KG
87D11-11A-KB 87D11-12A-KB

87D11-11A-KG 87D11-11A-KB
Overall Kg
KT NO. CUFT
(mm)
87D11-11A-KG 87D11-12A-KG 87D11-12A-KB
680 x 460 x 910 37 13.67
87D11-11A-KB Overall Kg
KT NO. Spec. CUFT
(mm)

Back Panel 87D11-12A-KG

87D11-12A-KB
5
Drawer
650 x 460 x 862 46 10.63

87D11-06A-G
87D11-06A-B

Overall Kg
KT NO. CUFT
(mm)
87D11-06A-G
615 x 25 x 1052 5.3 1.08
87D11-06A-B
87D11-06A-G 87D11-06A-B

Pillar
87D11-07A-G 87D11-07A-B
87D11-071A-G 87D11-071A-B

Overall Kg
KT NO. CUFT
(mm)
87D11-07A-G
66 x 30 x 1420 2 0.24
87D11-07A-B
87D11-071A-G
33 x 30 x 1420 1.5 0.15
87D11-071A-B 87D11-07A-G 87D11-07A-B 87D11-071A-G 87D11-071A-B

33
 Pressed Wooden Board
87D11-08A 87D11-09A
Overall Kg
KT NO. CUFT
(mm)
87D11-08A 1360 x 465 x 38 12.5 1.61
87D11-09A 2042 x 465 x 38 18.75 2.39

Stainless Board
87D11-08SA 87D11-09SA

Overall Kg
KT NO. CUFT
(mm)
87D11-08SA 1360 x 465 x 38 12.5 1.61
87D11-09SA 2042 x 465x 38 18.75 2.39

34
 Optional
accessories
87D11-15A-KG / 87D11-15A-KB

Corner Wall Cabinet

87D11-15A-KG
87D11-15A-KB

Overall Kg
KT NO. CUFT
(mm)

87D11-13A-KG / 87D11-13A-KB 87D11-15A-KG

865 x 865 x 350 21 12.66
87D11-14A / 87D11-14SA 87D11-15A-KB

87D11-16A-KG / 87D11-16A-KB

Corner Bottom Cabinet Corner Back Panel

87D11-13A-KG 87D11-16A-G
87D11-13A-KB 87D11-16A-B

Overall Kg Overall
KT NO. CUFT KT NO. Kg CUFT
(mm) (mm)
87D11-13A-KG 87D11-16A-G
865 x 865 x 910 42 7.02 800 x 25 x 1052 5.3 1.08
87D11-13A-KB 87D11-16A-B

Stainless Steel Board Pressed Wooden Board

87D11-14SA 87D11-14A

Overall Kg
KT NO. CUFT
(mm) Overall Kg
KT NO. CUFT
(mm)
87D11-14SA 680 x 465 x 38 12.5 1.61
87D11-14A 680 x 465 x 38 12.5 1.61

35
 Customized Color Choice Chart

Color Item Number

Red 8743X-XB

Red+Black 8743X-XB-RK

Blue 8743X-XB-B

Blue+Black 8743X-XB-BK

Black 8743X-XB-K

Gray 8743X-XB-G

Orange+Black 8743X-XB-OK
Red

Red+Black Blue Blue+Black

Orange+Black Black Gray

(Other colors are optional, produce with minimum quantity)

36
 Tool Trolley

• Add strength and safety

• 100% open ball bearing • Central locking system
slide for drawer + 10mm top mat

75
mm
25
Kg

• One piece steel body

154
mm
30
Kg

• Embossed & hammed

edge drawer increase • Industrial TPR floor
strength brake carters

Accessory
87432-15 87432-17 87432-23 87432-24
▪ Plastic top tray ▪ Flat side panel
▪ Size : 920(W) x ▪ Size : 456 x 370mm
490(D) x 50(H)mm
Frame(mm) Divider Size
KT NO. Width x Depth x Height
Material mm

Long: 560x40(2PC.)
87432-23 574 x 358 x 40 Steel
Short: 368x40(2PC.)

87432-31 87432-32 87432-24 - Plastic

Long: 570x40(3PC.)
Short: 375x40(3PC.)
▪ Side handle bar ▪ Side tray
▪ Size :
(Ø)38.5 x 457(L) mm 87432-33 87432-34
▪ Magnetic tool holder ▪ Bottle side tray
▪ Size: 458 x 52 x 17mm

87432-52
▪ Size : 45(H) x 290(L) x 65(D)mm
▪ Paper holder

87432-41
▪ Work panel Can’t install side
tray(87432-32) at
▪ Size : 656(W) x 500(H) x 30(D) mm the same time

84087637BKT
▪ Size : 665(W) x 455(H) x 19(D) mm

37
 Tool Trolley
0% OPEN WER SIZ TING MA CESSORY
10 RA UT AC

E
D

T
5 10 O
76 m
DR
A WER x380m m m TOP PTI N AL
O

PIECE STE FORCEME 1-1

5"x /4"
E IN
RE
ON

NT
EL

S DR CA
TR H
ENGT AWER STERS

100 670 460

812
148

Tool Trolly Set EVA Foam Plastic Tray

P.62-65
P.82-87 P.68-80 P.94-118

38
 360
kg

87438-3B

75 25
87432-5B
mm Kg

154 30 87434-7B
mm Kg

87437-8B
Selective colors:

87437-10B

-B -G
(Other colors are optional, produce with
minimum quantity)

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

4 Drawer 576 x 380 x 75

87432-5B 1 Drawer 576 x 380 x 154 56
Bulk Drawer 603 x 404 x 234
5 Drawer 576 x 380 x 75
87434-7B 64
2 Drawer 576 x 380 x 154
7 Drawer 576 x 380 x 75
87437-8B 5"x1-1/4" 360 Kg 66 12.24
1 Drawer 576 x 380 x 154
6 Drawer 576 x 380 x 48.5
87437-10B 3 Drawer 576 x 380 x 75 69
1 Drawer 576 x 380 x 154
3 Drawer 576 x 380 x 75
87438-3B 47.2
2 Door 603 x 404 x 478

39
 Tool Trolley
▪ Specifically collocate with workbench
670 460

87431-5BE
250
Kg

654

785
131
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

3 Drawer 576 x 380 x 75

87431-5BE 4" x 1-1/4" 250 Kg 50 10.03
2 Drawer 576 x 380 x 154

105 1070 460

600
Kg
87439-7B

1150
980
170
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

5 Drawer 576 x 380 x 75

1 Drawer 576 x 380 x 154
87439-7B 6" x 2" 600 Kg 129 25
1 Drawer 927 x 380 x 173
1 Door 317.5 x 404 x 554

105 1358 460

600
Kg
87435-13B
1150
980
170

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

10 Drawer 576 x 380 x 75

87435-13B 2 Drawer 576 x 380 x 154 6" x 2" 600 Kg 166 31.54
1 Drawer 1215 x 390 x 173

40
Risk-Free Tool Trolley
PIECE STE FORCEME WER SIZ TING MA
E IN RA UT

E
D
RE
ON

NT

C
EL

T
S DR 5 10
TR H 76 m
ENGT AWER x380m m m TOP

0% OPEN CESSORY
10 AC

DR O
A WER PTI N AL
O

680
Kg

87432-5G

75
mm
25
Kg

87434-7G

154
mm
30
Kg

Selective colors:
(Other colors are optional,
produce with minimum
-B -G
quantity)

Only open one drawer to

100 670 460
prevent tilting risk !
812

980
148

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

4 Drawer 576 x 380 x 75

87432-5G 1 Drawer 576 x 380 x 154 56
Bulk Drawer 603 x 404 x 234 5" x 2" 680 Kg 12.24
5 Drawer 576 x 380 x 75
87434-7G 64
2 Drawer 576 x 380 x 154

41
 Classic Bumper Type Tool Trolley
CKING 0% OPEN WER SIZ TING MA CESSORY
LO 10 RA UT AC

E
D

T
5 10 O
76 m
SY
STEM
DR
A WER x380m m m TOP PTI N AL
O

FORCEME PER PL
PIECE STE IN
1-1
5"x /4" UM U
E

S
RE
ON

NT
EL

S DR CA
TR H SA
ENGT AWER STERS FETY

820

475

775
940

Tool Trolly Set EVA Foam Plastic Tray

P.62-65
P.82-87 P.68-80 P.94-118

42
 360
kg
87632-5B

75
mm
25
Kg

87634-7B
154
mm
30
Kg

▪ Soft bumpers each side avoids scratch or

damage vehicle
▪ More space for bottles & hanging
▪ Easy move two side handle bar &
industrial TPR casters
▪ 100% pull out ball bearing drawer
▪ One piece steel for heavy load structure
▪ Central locking system + 10mm top mat

Selective colors:
• Multipole
space bar to
hold other tools

• Embossed & hammed edge

drawer increase strength -B -G

(Other colors are optional, produce with

• With bottle tray minimum quantity)
and side tray

• Industrial TPR floor

brake casters
• Ball bearing • Black anodized • Soft bumpers
drawer aluminum strip side advioding
damage
vehicle

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

4 Drawer 576 x 380 x 75

87632-5B 1 Drawer 576 x 380 x 154 59
Bulk Drawer 603 x 404 x 234 5"x1-1/4" 360 Kg 15.64
5 Drawer 576 x 380 x 75
87634-7B 66.14
2 Drawer 576 x 380 x 154

43
 Risk-Free Bumper Type Tool Trolley
0% OPEN WER SIZ CESSORY
10 RA
AC

E
D
5 O
DR 76 m PTI N AL
A WER x380m O

PER PL TING MA
UM U
UT

T
SA 10
FETY m m TOP
for 87934-7BF for 87934-7B

735 485
1035

Tool Trolly Set EVA Foam Plastic Tray

P.62-65
P.82-87 P.68-80 P.94-118

44
 680
kg 87934-7B

74
mm
25
Kg

87934-7BF

153
mm
30
Kg ▪ Smooth to slip with 2 steps safety lock casters
▪ 5*2"TPR high-perfomance wheels on roller
bearings ,w/brake
▪ Patent crane hook lock drawer prevent
tilting risk
▪ More space for bottles & hanging
▪ 100% pull out ball bearing drawer
▪ Double-wall construction for dust free
storage
▪ Central locking system + 10mm top mat

Selective colors:

• Industrial TPR floor

brake casters

-B -G
(Other colors are optional, produce with
• Soft bumpers side • Black anodized
minimum quantity)
avoids damage vehicle aluminum strip

Dimension(mm) Static Kg
KT NO. Spec. Contents Casters CUFT
Width x Depth x Height load

87934-31 Pull handle bar x 1

87934-7B 69.70 12.43

7 5-576 x 380 x 74 Tool bin & oil can

87934-32 5" x 2" 680 kg
Drawer 2-576 x 380 x 153 holder x 1

87934-7BF 75.00 12.70

87502-051 Single hook x 4

45
 Tool Trolley

15
Kg

30
87441-1B
Kg

▪ 1 drawer trolley
▪ Two 3.5" deep trays are
positioned for convenience

787 15
410 716
20 Kg
Kg

87441-3B
880

▪ 3 drawer trolley
▪ 2 PC. protective mat for top and
bottom shelves
▪ 3 PC. protective drawer liners

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height CUFT

overall 716 x 410 x 750

overall + 4" x 1-1/4"
87441-1B Casters
716 x 410 x 880 23.2 2.7

1 Drawer 569 x 275 x 75

overall 716 x 410 x 750

overall + 4" x 1-1/4"
716 x 410 x 880
Casters
87441-3B 33.0 4.95
1 Drawer 569 x 275 x 75

2 Drawer 569 x 275 x 50

46
Shelf Trolley
▪ Especially developed for the demands of paint shops Optional accessories:
and workshops
▪ Rubber top handle for placement auto body
▪ Round corners prevent damage of the vehicle
▪ Industrial NBR casters with high loading capacity and
87502-050
maneuverability U Shape hook
▪ Loading capacity per shelf 80 kgs
▪ Resistant to solvent plastic
▪ Hanging solutions accessories for two side panels

87502-051
80 1" Shape hook
kg

87502-061
80 80 1" Double hook
kg Kg

80 80 9TE11
kg Kg Magnetic round
holder for parts

9TE21
Magnetic foldable
holder for T handle

9TE31
Magnetic holder
for impact wrench

KT NO. Overall Overall + 4” casters Casters Kg CUFT

87440 850 x 480 x 1000 850 x 480 x 1136 4” x 1-1/4” 15.5 4

47
 3 Reversible Drawers
Ball Bearing Type
Shelf Trolley
87442-3B

250 87442-16-K
kg

25
Kg

30
Kg

576

415
1050
948

87442-36
102

765 490

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height Casters Static load CUFT

Overall 765 x 490 x 948

Overall + 4" Casters 765 x 490 x 1050
87442-3B 4" x 1-1/4" 250 Kg 50 9.9
1 Drawer 576 x 415 x 75
2 Drawer 576 x 415 x 154

48
 Evolution Roller

▪ Enlarge storage for long straight object or tools

▪ All corners placement for large object or tools,
increase storage arrangement to 850mm length tools
▪ Folded edges for magnetic holder or tools, 80mm width
▪ Multi-function concave shape for safety placement of tools
▪ Hanging solutions with various additional accessories
kg
KT NO. Contents 15.0 1/1

87430A1 Multipole space bar x 2

87430A2 Pull handle bar x1

87430A4 Tool bin & oil can holder x 2

87430A 87502-051 Single hook x4

87430A1-K Multipole space bar x 2

87430A2-K Pull handle bar x1

87430A4-K Tool bin & oil can holder x 2

87430A-K 87502-051 Single hook x4

Optional accessory for evolution roller

87430A1(red) 87430A2(red) 87430A3(red) 87430A4(red) 87502-050
87430A1-K(black) 87430A2-K(black) 87430A3-K(black) 87430A4-K(black) U Shape hook
Multipole space bar Pull handle bar Large tool holder Tool bin & oil can holder
Size: ø26 x 320mm Size: 375 x 125 x 240mm Size: 365 x 80 x 90mm

87502-051 87502-061 9TE11 9TE21 9TE31

1” Shape hook 1” Double hook Magnetic round holder Magnetic foldable Magnetic holder for
for parts holder for T handle impact wrench

49
 Workbench
1000 • 87502-11 cutting board
kg

15
kg

20
kg

• 87431-5BE P.40
Can be collocated
with workbench
87502

87502-01 87502-02 87502-05

▪ Tool holder 500mmL ▪ Magnetic tool holder for ▪ 87502-050 U Shape hook
workbench backpanel 87502-051 1" Shape hook
Size: 458 x 52 x 17mm 87502-054 4" Shape hook
87502-058 8" Shape hook

87502-06 87502-11 87502-12

▪ 87502-061 1" Double hook ▪ Cutting board ▪ 4 PC. of adjusting device
87502-064 4" Double hook ▪ Oil-resistant, acid- ▪ Included adjustable bolt &
87502-068 8" Double hook resistant, moisture-resistant adjustable pad
and anti-static
▪ 10mm PP foaming board

87502P02 87502P03
▪ Drawer chest for workbench ▪ 2 PC. wall cabinets

87502P02

87502P021 x 2

Dimension(mm) Kg Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height CUFT KT NO. Spec. Width x Depth x Height CUFT

Overall 660 x 307 x 251 87502P03 Overall 400 x 200 x 500 14.00 4.5
87502P02 2 Drawer 569 x 275 x 50 13.00 2.7
1 Drawer 569 x 275 x 75

50
Workbench
• Workbench excludes cutting board & tool holder

87502 87502P91
▪ 3 drawer chest-ball bearing slide ▪ 3 drawer chest-ball bearing slide
▪ 2 wall cabinets

Dimension(mm) Kg
800mm KT NO. Spec. Width x Depth x Height CUFT

Overall 1525 x 700 x 800

3 Drawer chest 660 x 307 x 251
87502P91 61.00 9.2
2 Drawer 569 x 275 x 50
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT 1 Drawer 569 x 275 x 75

Overall 1525 x 700 x 1520

3 Drawer chest 660 x 307 x 251
87502 2 Drawer 569 x 275 x 50 86.00 13.4
1 Drawer 569 x 275 x 75 87502P011
Wall cabinet 400 x 200 x 500 ▪ Workbench

87502P01
▪ Workbench with back panel

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

87502P011 Overall 1525 x 700 x 800 48.00 6.5

87502P012
▪ Back panel
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

87502P01 Overall 1525 x 700 x 1520 59.00 6.5

87502P90 86.5mm 86.5mm

▪ 2 wall cabinets
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

87502P012 Overall 1525 x 20 x 700 13.50 2.7

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

A-1525 x 700 x 1520 59.00 6.5

87502P90 Overall
B-400 x200 x 500 14.00 4.5

51
 Workbench
87512 87512P03
▪ Workbench - 3 drawer chest ball bearing slide ▪ Back panel
1 wall cabinet

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT
800mm 87512P03 Overall 1559 x 203 x 603 43.30 10.10

Workbench Cabinet
with Hooks
Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

Overall 1565 x 766 x 1403

3 Drawer chest 668 x 313 x 270 87201
87512 2 Drawer 568 x 262 x 50 130.10 21.19
▪ With 20 PC. hooks
1 Drawer 568 x 262 x 75
- 5 PC. U shape hook (87502-050)
Wall cabinet 1565 x 203 x 603
- 10 PC. 1" single hook (87502-051)
- 5 PC. 1" double hook (87502-061)
87512P01 ▪ Heavy duty design for storage heavy duty tool
▪ Workbench ▪ Powder coating finishing
▪ Full opened door with 2 aluminum alloy handles
▪ 4 holes on the back of cabinet to be fixed on the
wall
▪ Double wall door panel design, peg hole at inside
wall of door
800mm

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

87512P01 Overall 1565 x 766 x 800 71.50 7.22

Steel thickness: (body )1.0 mm

87512P02
▪ Drawer chest for workbench 87502-050 87502-051 87502-061

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

87201 Overall 820 x 250 x 900 24.00 8

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

Overall 668 x 313 x 270

87512P02 2 Drawer 568 x 262 x 50 15.30 3.87
1 Drawer 568 x 262 x 75

52
 Tool Chest

87411-6B 87411-9B 87419-5B

(Extra deep)

87412-4B 87412-6B 87417-10B

(Extra deep)

▪ Powder coating Selective colors:

▪ Ball bearing slide -RK -B -BK -K -G -OK
▪ Central locking system
(Produce with minimum quantity)
▪ Hemed edge design to improve strength
and safety
▪ Drawer quick release and detent design

• Ball bearing slides • Steel ball • Lockable • Plastic drawer • Bottom rubber mats
divider for cabinet to avoid slipping

Dimension(mm) Kg Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height CUFT KT NO. Spec. Width x Depth x Height CUFT

Overall 660 x 307 x 374 Overall 660 x 307 x 374

Top 646 x 290 x 60 Top 646 x 290 x 60
87412-4B 21.00 3.97
87411-6B 3 Drawer 170 x 275 x 50 25.40 3.97 3 Drawer 569 x 275 x 50
2 Drawer 569 x 275 x 50 1 Drawer 569 x 275 x 75
1 Drawer 569 x 275 x 75 Overall 660 x 307 x 374
Overall 660 x 307 x 427 Top 646 x 290 x 60
Top 646 x 290 x 60 87412-6B 3 Drawer 170 x 275 x 50 23.30 3.97
87411-9B 6 Drawer 170 x 275 x 50 30.20 4.3 2 Drawer 569 x 275 x 50
2 Drawer 569 x 275 x 50 1 Drawer 569 x 275 x 75
1 Drawer 569 x 275 x 75 Overall 660 x 455 x 483
Overall 660 x 455 x 483 Top 646 x 420 x 70
Top 646 x 420 x 70 6 Drawer 169 x 410 x 48.5
87419-5B 40.00 8.58 87417-10B 51.20 8.58
2 Drawer 576 x 410 x 48.5 1 Drawer 169 x 410 x 154
3 Drawer 576 x 410 x 75 2 Drawer 576 x 410 x 48.5
1 Drawer 576 x 410 x 75

53
 Tool Chest
▪ 3 drawer chest
87421-3B ▪ Intermediate type
▪ Heavy gauge steel
▪ Drawer slides type-ball bearing
▪ Grooved full width drawer pulls add strength and
offer to list contents of drawer
▪ Central locking system
▪ 10mm Top mat
▪ Powder coating finish
▪ 4 pins on the middle chest corners to tie in with
top chest for extra security
▪ Overall size (mm) - 660(W) x 307(D) x 251(H)

KT NO. Spec. Dimension(mm) Kg CUFT

Width x Depth x Height

Overall 660 x 307 x 251

87421-3B 2 Drawer 569 x 275 x 50 13.00 2.7
10mm 1 Drawer 569 x 275 x 75
Top mat

• Ball bearing slides

Selective colors:

-RK -B -BK -K -G -OK

• Steel ball (Produce with minimum quantity)

Portable Tool Chest

87401-2

87401-3

▪ Heavy gauge steel plus flange reinforced design 87401-3H

▪ Close cover synchronously lock all of the drawers
▪ Powder coating
▪ Overall size (mm) - 535(W) x 220(D) x 287(H)
Only 87401-3H:

KT NO. Spec. Dimension(mm) Kg CUFT

Width x Depth x Height

87401-2 2 Drawer 504 x 195 x 79 8.80

87401-3 3 Drawer 504 x 195 x 52 10.20 2.05

• Internal lock • Ball bearing • Steel ball
87401-3H 3 Drawer 504 x 195 x 52 11.20 system slides

54
Tool Box
87402 87408
▪ 3 section fold up type and adjustable
▪ Tubular handle, curved hinge
▪ Shaped pressing on flat surface to
reinforced steel strength

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

5
87402 470 x 220 x 260 5.60 1.22
compartments
5
87408 530 x 220 x 260 6.70 1.3
compartments

87404 87407
▪ Meterial : PP
87404
▪ Multi-function box, extra space for tools and parts
▪ Light weight
▪ Durable design for tool storage

Dimension(mm) Kg
KT NO. Spec. Width x Depth x Height
CUFT

2
87404 560 x 278 x 270 2.40 1.75
compartments 87407
2
87407 445 x 240 x 206 1.74 0.79
compartments

Fabric Tool Box

87137
▪ Material : PP
▪ Parts box

Dimension(mm) g
KT NO. Width x Depth x Height

87137 180 x 39 x 96 109

55
 Fabric Tool Bag
87711C
▪ Waterproof 1200 D Nylon Oxford ▪ 39 inner pockets for multiple-tools storage
▪ Light weight stainless bar & comfortable EVA handle ▪ 50% less weight than metal box
▪ Velcro cover for easy access & quickly take out tools
▪ Adjustable ambi-bag with soft padded shoulder strap

Dimension(mm) Kg
KT NO. Width x Depth x Height

87711C 550 x 285 x 370 3.00 1/1

87721B
▪ Heavy duty 600 D polyester
▪ Wide opening at top with zipper for easy access and
security
▪ Removable shoulder strap
▪ Removable compartment for greater organization
▪ External and internal side pockets
Dimension(mm) Kg
KT NO. Width x Depth x Height

87721B 360 x 200 x 250 0.95 1/1

16” Tool Bag With Rubber Waterproof Base

87722B
▪ Waterproof, reinforced rubber base protects tools
▪ 600D Nylon Oxford
▪ Internal and external storage pockets
▪ Zip fastening and rubber comfort grip handles
▪ Removable padded shoulder strap for comfortable carry

Dimension(mm) Kg
KT NO. Width x Depth x Height

87722B 390 x 210 x 320 1.8 1/5

56
 Handy Case Series
The outside of handy case can afford

andy high load capacity, and great crash-

resistance. There are four different sizes with
ase the conception of T.C.S mod. Therefore, its
design is based on the user perspective ,
easy to carry and store, make every user
enjoying their work.

TRAY / EVA

TRAY / EVA

280 186
187

Tray #7
375

Tray #8

280 140

Tray
375
375

Tray #9
# 10

#7 #10 #8 #9

820001 820002 820003 820011

289 x 230 x 66mm 389 x 185 x 66mm 389 x 230 x 66mm 422 x 372 x 92mm

57
 ▪ Made of shockproof PE-HD for heavy duty contents
▪ Ideal for tool storage & tool box system
▪ Easy to pile and store
▪ Anti-collision
▪ Case for Eva foam / tray

• Steel buckle provide • Foam protection against

security & strength collisions

Size g • Hexagon overlap in 4 • Extra space for thumb

KT NO. EVA / Tray
mm
corners, easy to file up taking out
820011 422 x 372 x 92 #9 1416.5 1/4

▪ Tool case made of sturdy ABS material

▪ Ideal for tool storage & tool box system
▪ Easy to pile and store
▪ Case for Eva foam / tray

• Plastic padding for • 180˚ swivel handle easy

better stable storage to carry
• The hinge construction
makes box more durable

• Easy and quick to lock • Foam protection against

collisions

Size g
KT NO. EVA / Tray
mm

820001 289 x 230 x 66 #7 641.0 1 /6

820002 389 x 185 x 66 #10 651.2 1/5 • Hexagon overlap in 4 • Extra space for thumb
820003 389 x 230 x 66 #8 793.0 1/4 corners, easy to file up taking out

58
Multi-Storage Case
827011
▪ Heavy duty plastic blow case with foam padded internal
▪ High impact polystyrene with dividers make 12 spaces
▪ Easy to carry tools from trolley & store bolts, nuts
▪ Mini case (278 x 87 x 42 mm)

Blow case size (mm) :

Kg
KT NO. Contents 422 x 372 x 92 (0.51 Cuft)

827011 84700011B 2.19 1/4

Plastic Tray
847000
▪ For accessories, parts and consumables
▪ Easily combine the parts box sizes depending on
the handy case
84700011B 84700002B 84700003B
▪ Easy to carry and segment

KT NO. Size g

84700011B 283 x 93 x 43 113 1 / 40

84700002B 140 x 93 x 43 60 1 / 80
84700003B 187 x 47 x 43 50 1 / 80

8 PC. 16 PC. 24 PC.

5 6 0 5 6 0 5 6 0

3 7 5 3 7 5 3 7 5

59
 Mobile Work Chair
Material: PVC leather + foam cushion + finishing powder coating steel
Two Open Storage Areas
330 225
15

87452A-B
240

Drawer
70
260
S i ze : 3 4 5 x 1 9 5 x 6 5 m m
350

Tray / EVA Tray / EVA Tray / EVA

187.5
163

185
#2 #5 #7
263 265 280

150
kg
87452B-B

Metal tray with rack funciton

87452C-B

Metal tray

Dimension(mm) Kg
KT NO. Width x Depth x Height CUFT

87452A-B 7.4 1/1

• Four 360° Rotation Spherical Casters 87452B-B 350 x 260 x 240 6.4 1/1 0.49
87452C-B 6.3 1/1

• Optional Accessory

87452A1-B

60

210

80

60
 Tools Control & Security Storage System
How to complete your tool trolley set and tool chest set

Drawer (646x290 mm) Drawer (172x275 mm)

642
163

Tray #1

286

263
Tray #2

........................................................................................................................................................
Drawer (572x275 mm)
554

Tray #3

260
........................................................................................................................................................
Drawer (579x380 mm)
560 265 30 265

375
375
Tray #6 Tray #4 P* Tray #4

Tree-colors fabrication
560 560

Tray #7
187

Tray #7 Tray #7
375

375
Tray #9

Tray #7 Tray #7 Tray #7

280 280
waterproof
560 560
187

Tray #7
Tray #10

Tray #10

375

375

Tray #8 Tray #8 Tray #8

Tray #7

Laser marking 280 140 187

560 560 560

Tray #10

Tray #10

Tray #10

Tray #10

Tray #10

Tray #10
375

375

375

Tray #9 Tray #9 Tray #9

Missing tools detected

280 280 140 140

▪ Security:
Separate spaces for each tools to prevent them being left in dangerous areas
▪ Benefit:
Tools are quickly located and immediately returned after use to avoid loss
3 colors EVA foam offers convenient identification of use with sustained sizes and mark
▪ Efficiency:
A quick glance helps for missing tools
Durable material prevents being dirty for easy maintenance

61
 235
PC. Tool Trolley Contents
Contents No. 934-235MRVD Kg 24.15 CUFT 2.97

▪ Special tool set for Automobile, suitable for VOLKSWAGEN-GROUP, MERCEDES-BENZ,

OPEL, BMW & Japanese passanger car

9-4537MRV #9 P.75 9-2565MRV #7 P.73 9-4147PRV 9-90135MRV 9-1220MRV #9 P.76 9-31124MRV #6 P.71
9-4129PRV #7 P.74 #10 P.79 #10 P.79

9-90119MRV #9 P.76 9-40104GPV 9-40113GPV 9-44214GPV 9-90118PRV

#10 P.80 #10 P.80 #10 P.80 #10 P.80

235
PC. Tool Trolley Set

7
Kg 88.15 934-235MRV 934-235MRV-G 934-235MRV-B
CUFT 15.21 (87434-7B P.39) (87434-7B-G P.39) (87434-7B-B P.39)

7
Kg 90.29 9634-235MRV 9634-235MRV-G 9634-235MRV-B
CUFT 18.61 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-235MRV 9934-235MRV-G
Kg
7
93.85
9934-235MRV-B
CUFT 15.4 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 99.15 9934F-235MRV 9934F-235MRV-G 9934F-235MRV-B
CUFT 15.67 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

62
 286
PC. Tool Trolley Contents
Contents No. 934-010MRVD Kg 28.8 CUFT 2.97

▪ Special tool set for automobile, suitable for VOLKSWAGEN-GROUP, MERCEDES-BENZ,

OPEL, BMW & Japanese passanger car

9-3544MRV #9 P.75 9-4537MRV #9 P.75 9-4147PRV 9-4401MPV 9-2565MRV #7 P.73 9-90119MRV #9 P.76 9-1220MRV #9 P.76
#10 P.79 #10 P.79 9-4129PRV #7 P.74

9-31124MRV #6 P.71 9-40104GPV 9-40113GPV 9-90135MRV 9-90118PRV

#10 P.80 #10 P.80 #10 P.79 #10 P.80

286
PC. Tool Trolley Set

7
Kg 92.8 934-010MRV 934-010MRV-G 934-010MRV-B
CUFT 15.21 (87434-7B P.39) (87434-7B-G P.39) (87434-7B-B P.39)

7
Kg 94.94 9634-010MRV 9634-010MRV-G 9634-010MRV-B
CUFT 18.61 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-010MRV 9934-010MRV-G
Kg
7
98.5
9934-010MRV-B
CUFT 15.4 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 103.8 9934F-010MRV 9934F-010MRV-G 9934F-010MRV-B
CUFT 15.67 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

63
 325
PC. Tool Trolley Contents
Contents No. 934-011MRVD Kg 33.35 CUFT 3.73

9-3544MRV #9 P.75 9-4537MRV #9 P.75 9-2565MRV #7 P.73 9-1112MRV #9 P.76 9-90119MRV #9 P.76 9-1220MRV #9 P.76
9-4143FRV #7 P.74

9-31124MRV #6 P.71 9-40104GPV 9-40113GPV 9-90135MRV 9-90118PRV 9-90413TQV #6 P.73

#10 P.80 #10 P.80 #10 P.79 #10 P.80

9DC23
P.619
7962-04
P.462 2121-18 P.631

14210212 P.366
7963-04
14226512 P.366
P.462

9-44214GPV 9-22108MRV #9 P.77

#10 P.80

325
PC. Tool Trolley Set

7
Kg 97.35 934-011MRV 934-011MRV-G 934-011MRV-B
CUFT 15.97 (87434-7B P.39) (87434-7B-G P.39) (87434-7B-B P.39)

7
Kg 99.49 9634-011MRV 9634-011MRV-G 9634-011MRV-B
CUFT 19.37 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-011MRV 9934-011MRV-G
Kg
7
103.05
9934-011MRV-B
CUFT 16.16 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 108.35 9934F-011MRV 9934F-011MRV-G 9934F-011MRV-B
CUFT 16.43 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

64
 525
PC. Tool Trolley Contents
Contents No. 935-525CRVD Kg 73.49 CUFT 6.51

9-9003MRV01 #6 P.71 9-6314MRV #6 P.71 9-9040SRV #9 P.75 9-4129PRV #7 P.74

9-3612MR #7 P.112

9-4147PRV 9-4401MPV 9-4435MP #9 P.113 9-1112MRV #9 P.76 9-1220MRV #9 P.76 9-90119MRV #9 P.76 9-91190CRV #9 P.77
#10 P.79 #10 P.79

9-91124MRV #6 P.72 9-90217GRV #6 P.72 9-31124MRV #6 P.71

74010 74020 74020

P.479 P.479 P.479

7861-16 7811-12 7851-16

P.453 P.452 P.454

7911-12 21-20-101 6532-14

P.481 P.464 P.356

9-22108MRV #9 P.77 9-4143FRV #7 P.74 9-90413TQV #6 P.73

9-30904AY #7 P.112
79094-08C
P.465

525
PC. Tool Trolley Set

Kg 239.49
13
CUFT 38.05

935-525CRV
(87435-13B P.40)

65
 187
PC. Tool Chest Set
911-004CRV Kg 47.38 CUFT 6.51

9-9077CRV #1 P.68 9-42102GPV 9-40122GPV 9-40112GPV

#2 P.69 #2 P.69 #2 P.69

9-91131MRV #3 P.70 9-91126SRV #3 P.70

79093-05C
P.465

7811-16 87411-6B P.53

P.452
9-90145CRV #3 P.70

219
PC. Tool Chest Set
911-000CRV Kg 48.27 CUFT 6.10

9-7069CRV #1 P.68 9-42114GPV 9-40102GPV 9-2548CRV

#2 P.69 #2 P.69 #2 P.69

9-90129CRV #3 P.70 9-90128SR #3 P.95

87411-6B P.53

9-90138CR #3 P.96

66
306
PC. Tool Chest Set
919-001CRV Kg 66.01 CUFT 11.05

9-9003MRV01 #6 P.71 9-9040SRV #9 P.75 9-1220MRV #9 P.76

9-90217GRV #6 P.72 9-31110MRV #9 P.77 9-91190CRV #9 P.77

79094-08C
P.465

87419-5B P.53
7911-12
P.481

9-91124MRV #6 P.72

67
 Drawer (646x290 mm)
642

Tool Set Content

286
Tray #1

9-7069CRV Tray category #1 (642 x 286mm)

kg 7.5 1/4
Contents
70
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, PC.
3330M
17, 19, 20, 21, 22
3/8, 7/16, 1/2, 9/16, 5/8, 11 /16,
3330S
3/4, 13 /16
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
4330MR 7911-12
20, 21, 22, 23, 24, 27, 30, 32
3/8, 7/16, 1/2, 9/16, 5/8, 11 /16,
4330SR
3/4, 13 /16, 7/8, 15/16, 1
463516R 463521R 3792

4791R 3779-08G 4779-10GR

3452-08F 4452-15FR 3812

3571-08 4572-10 4813

3221-03 4251-05R
3221-06 4251-10R

9-9077CRV Tray category #1 (642 x 286mm)

kg 7.95 1/3
Contents
2330M 4, 5, 6, 7, 8, 9, 10 77
PC.
3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
2330S
3/8
3330M 10, 11, 12, 13, 14, 15, 17, 19
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,
3330S
13/16
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
4330MR
20, 21, 22, 23, 24, 27, 30, 32
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,
4330SR 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8,
1-3/16, 1-1/4
463021R 2792 3792 4791R

2779-55G 3779-08G 3814

4779-10GR 2221-04 3221-06

4251-10R 3452-08F 4452-15FR

4572-12

68
 163

Tool Set Content

263
Tray #2

Drawer (172x275 mm)

9-2548CRV Tray category #2 (163 x 263mm) 9-40122GPV Tray category #2 (163 x 263mm)

48 2
PC. PC.

kg 0.95 1 / 10
kg Contents
Contents 1.28 1 / 10
4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 6111-08 6011-10R
2235M
13
5/32, 3/16, 7/32, 1/4, 9/32,
2235S
5/16, 11/32, 3/8, 7/16, 1/2
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
2335M
12, 13 9-42102GPV Tray category #2 (163 x 263mm)
5/32, 3/16, 7/32, 1/4, 9/32,
2335S
5/16, 11/32, 3/8, 7/16, 1/2 2
2792 2813 2779-55G
PC.
2221-02
2221-04

9-40102GPV Tray category #2 (163 x 263mm)

2
PC.
kg 0.32 1 / 10
Contents

68HS-07 68SS-07

9-42114GPV Tray category #2 (163 x 263mm)

kg 1.0 1 / 10
Contents
4
PC.
6011-10R 6511-10

9-40112GPV Tray category #2 (163 x 263mm)

2
PC.

kg 0.6 1 / 10
Contents

68HS-07 68SS-07

68HB-07 68SB-07
kg 0.69 1 / 10
Contents

6231-08 6311-08

69
 554

Tool Set Content

260
Tray #3
Drawer (572x275)

9-91126SRV Tray category #3 (554 x 260mm)

kg 3.28 1/3
Contents 26
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, PC.
5060
11/16, 3/4, 13/16, 7/8, 15/16, 1
5/16 x 3/8, 3/8 x 7/16,
5930
1/2 x 9/16, 9/16 x 5/8

1130SR 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

3611R 6, 12

9-91131MRV Tray category #3 (554 x 260mm)

Contents
kg 2.98 1/4 31
PC.
1930 8x10, 10x12, 11x13, 14x17
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
1060
17, 18, 19, 20, 21, 22, 24
H1.5, H2.5, H2, H3, H4, H5, H6, H8,
1125MR
H10

9-90145CRV Tray category #3 (554 x 260mm)

kg 4.04 1/3
Contents
1060 27, 30, 32
45
PC.
5060 1-1/16, 1-1/8, 1-1/4
1481 PH1x75, PH2x100, PH3x150
1482 5.5x75, 6.5x100, 8x150
1025S 3.0, 4.0, 5.0, 6.0
1025P PH1, PH2 x 2, PH3
1025Z PZ1, PZ2 x 2, PZ3
1025T T10, T15, T20, T25, T27, T30, T40
1025H H3, H4, H5, H6
T10H, T15H, T20H, T25H, T27H, T30H,
1025U
T40H
7702-25 753-63 2141

9-90129CRV Tray category #3 (554 x 260mm)

kg 2.5 1/4
Contents
PH0 x 60, PH1 x 80, PH2 x 38,
29
1421 PC.
PH2 x 100, PH3 x 150
3 x 75, 6.5 x 38, 6.5 x 100, 6.5 x 150,
1422
8 x 175

1130SR 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

H1.5, H2, H2.5, H3, H4, H5, H6, H8,

1120MR
H10

6111-07 6231-07

6311-06

70
 560

375
Tray #6

Tool Set Content Drawer (579 x 380 mm)

9-6314MRV Tray category #6 (560 x 375mm)

14
PC.
kg 9.96 1/2
Contents

6335M 33, 34, 35, 36, 38, 41, 46, 50

6572-20 6779-20F

6251-04
6251-08 6814
6251-16

9-9003MRV01 Tray category #6 (560 x 375mm)

7.30 103
Kg
Contents 1/3
PC.
2235M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

3023 T10,T15,T20,T25,T27,T30,T40,T45,T50

3025 H3,H4,H5,H6,H8,H10,H12

3235M 10,12,13,14,15,16,17,18,19,21
8,10,11,12,13,14,15,16,17,18,19,20,
3330M
21,22
10,12,13,14,15,16,17,18,19,20,21,22,
4330MR
23,24,27,28,30,32

7702-50 7703-50

2792 3792 4791R

363516 363521 36A014

2221-02 3221-03 4251-05R

2221-04 3221-10 4251-10R

2813 3812 4813

2771-55G 3771-08G

4771-10GR 4462-18F

9-31124MRV Tray category #6 (560 x 375mm)

24
PC.
kg 2.41 1/5
Contents

1421 PH2x38, PH1x80, PH2x100, PH3x150

3x75, 4x100, 5.5x100, 6.5x100,

1422
10x200, 6.5x38
T6x48, T7x48, T8x75, T9x75, T10x75,
T15x75, T15x250, T20x100, T20x250,
1423
T25x100, T25x250, T27x100, T30x125,
T30x250

71
 560

375
Tray #6

Tool Set Content

Drawer (579 x 380 mm)

9-90217GRV Tray category #6 (560 x 375mm)

Contents
Kg
3.89 1/6
17
764 3,4,5,6 PC.

76105-06 76717-05

7811-16 6011-10R

6111-08 6231-07 6311-08

6314-05 68HB-07 68HS-07

68SB-07 68SS-07 6511-10C

9-91122MRV Tray category #6 (560 x 375mm)

Contents
Kg
3.18 1/5
26
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, PC.
1060
21, 22, 24

115HM H6, H7, H8, H9, H10, H11, H12, H13

9-91124MRV Tray category #6 (560 x 375mm)

Contents
Kg
4.12 1/5
3731 10, 12, 13, 14, 17, 18, 19
24
PC.
1421 PH2 x 300
1422 5 x 300

74030 6615-11
3611-10R 9TK118
3611-12R

11409SQ 79063-12

72
 560

375
Tray #6

Tool Set Content Drawer (579 x 380 mm)

9-90413TQV Tray category #6 (560 x 375mm)

kg 2.49 1/5
Contents
13
PC.
115HM 8, 10, 13

9CZ101 115345R-05

48280180 43280212
43240115Y 75102-08G
75202-08G 75302-08G
75402-08G 75502-08G

9-91217MRV Tray category #6 (560 x 375mm)

Contents
kg 6.11 1/2 17
PC.
1421 PH1 x 80, PH2 x 100
1422 3 x 75, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175
T15 x 75, T20 x 100, T25 x 100, T27 x 100,
1423
T30 x 125
48280180 9CF220
7823-10
7823-20 7821-30

280 280
187

Tray #7 Tray #7

Tool Set Content

187

Tray #7 Tray #7

Drawer (579 x 380 mm)

9-2565MRV Tray category #7 (280 x 187mm)

Contents
kg 1.38 1 / 10 65
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
PC.
2335M
13, 14
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
2235M
13, 14
2375M E4, E5, E6, E7, E8
T8, T9, T10, T15, T20, T25, T27, T30,
2013X
T40
2015X H3, H4, H5, H6, H8

2018X PZ1, PZ2

2011X PH1, PH2

2012X 3.5, 5.5, 8

1025T T6, T7

1025M M4, M5, M6, M8, M10

2792 2813 276A-04G

2221-02, 2221-04, 2221-06

73
 280 280

187
Tray #7 Tray #7

Tool Set Content

187
Tray #7 Tray #7

Drawer (579 x 380 mm)

9-4129PRV Tray category #7 (280 x 187mm)

Contents
kg 2.07 1 / 10 29
H3, H4, H5, H6, H7, H8, H10, H12,
PC.
4025
H14, H17, H19
4026 M5, M6, M8, M10, M12, M14

402B M16, M18

9-4143FRV Tray category #7 (280 x 187mm)

kg 1.63 1/8
Contents
43
1636H H5, H6, H7, H8, H10, H12 PC.

1636M M6, M8, M10, M12

1636T T30, T40, T45, T50, T55, T60

1832H H3, H4, H5, H6, H7, H8, H10, H12

1832T T15, T20, T25, T27, T30, T40, T45, T50

1836P PH2, PH3

1836S 9 x 1.6, 11 x 2

1880P PH2, PH3

1880S 8 x 1.2, 10 x 1.6

414810M
4112
414810S

560
Tray #8

Tray #8

Tray #8

375

187
Drawer (579 x 380 mm)

9-2550MRV Tray category #8 (187 x 375mm)

Contents
kg 1.37 1/3 50
PC.
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
2335M
12, 13, 14
2375M 4, 5, 6, 7, 8

2031 PH1, PH2, PH3, PH4

2032 4, 5.5, 6.5, 8, 10

T8, T9, T10, T15, T20, T25, T27,
2033
T30, T40
2035 H3, H4, H5, H6, H7, H8, H10

2771-55G 2178DF

2792 2571-45
2293-04
2221-02
2293-06

74
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140

Drawer (579 x 380 mm)

280

9-3544MRV Tray category #9 (280 x 375mm)

Contents
kg 3.19 1/5 44
PC.
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
3335M
20, 21, 22

3375M E7, E8, E10, E11, E12

3230M 8, 10, 11, 12, 13, 14, 16, 17, 19

3750M 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

3812
3814 3779-08G

3221-03
3223-14 3221-06
3221-10

9-4527MRV02 Tray category #9 (280 x 375mm)

Contents
kg 4.72 1/5 27
PC.
8, 9, 10, 11, 12, 13, 14, 15, 16,
4335MR 17, 18, 19, 21, 22, 23, 24, 27, 29,
30, 32

4771-10GR 4791R

4572-12 4251-05R
4251-10R
4452-15FR 4581-10

9-4537MRV Tray category #9 (280 x 375mm)

kg 4.39 1/5
Contents
8, 10, 11, 12, 13, 14, 15, 16, 17, 18,
37
PC.
4335MR 19, 20, 21, 22, 23, 24, 26, 27, 28, 30,
32
E10, E12, E14, E16, E18, E20, E22,
4375M
E24

4779-10GR 4293-02
4251-05R 463516R
4251-10R 463521R
4791R 463014RC

9-9040SRV Tray category #9 (280 x 375mm)

Contents
Kg
3.02 1/5
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
40
2335S PC.
11/32, 3/8, 7/16, 1/2

3330S 3/8, 7/16, 1/2, 9/16, 5/8

3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,

4330SR
13/16, 7/8, 15/16, 1, 1-1/8, 1-1/4,
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,
5060
11/16, 3/4, 7/8, 15/16, 1

75
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140 280

Drawer (579 x 380 mm)

9-7560MRV01 Tray category #9 (280 x 375mm)

kg
Contents 6.24 1/2
60
2335M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 PC.
10, 11, 13, 14, 15, 16,17, 18, 19, 20,
4335MR
21, 22, 24, 27, 30, 32
1025S 3.0, 4.5, 5, 6.5, 8
1025P PH0, PH1, PH2, PH3
T10H, T15H, T20H, T25H, T27H, T30H,
1025U
T40H
1025Z PZ1, PZ2, PZ3

276A-04G 4771-10GR 4452-15FR 4572-12

213312DF 2792 4791R 2813 2745

2223-02 4251-05R
2223-04 4251-10R

9-1112MRV Tray category #9 (280 x 375mm)

Contents
kg 2.34 1/4 12
6x7, 8x9, 10x11, 12x13, 14x15,
PC.
1900 16x17, 18x19, 20x22, 21x23, 24x27,
25x28, 30x32

9-1220MRV Tray category #9 (280 x 375mm)

Contents
kg 3.49 1/4 20
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
PC.
1060
17, 18, 19, 21, 22, 24, 27, 30, 32

9-90119MRV Tray category #9 (280 x 375mm)

kg 3.04 1/4
Contents 19
6x7, 8x9, 10x11, 12x13, 14x15, PC.
1970
16x17, 18x19, 20x22, 24x27, 30x32
T10, T15, T20, T25, T27,T30, T40, T45,
1143
T50

76
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140

Drawer (579 x 380 mm)

280

9-91190CRV Tray category #9 (280 x 375mm)

90
Contents
Kg
2.22 1 / 10 PC.

1025S 3.0, 4.0, 5.0, 6.0

1025P PH1, PH2 x 2, PH3

1025Z PZ1, PZ2 x 2, PZ3

1025T T10, T15, T20, T25, T27, T30, T40

1025H H3, H4, H5, H6

T10H, T15H, T20H, T25H, T27H, Contents
1025U
T30H, T40H
3/32, 1/8, 5/32, 3/16, 1/4, 5/16,
1025R RB2 1130SR
3/8

7702-25 753-63 T10H, T15H, T20H, T25H, T27H,

1147R
T30H, T40H
10D0 10,12,13,14,17,18,19 3611-06R
77328-26
3611-08R
1130MR H2.5, H3, H4, H5, H6, H8, H10 276A-04G

9-22108MRV Tray category #9 (280 x 375mm)

Contents
kg 0.89 1/5 8
PC.
H2, H2.5, H3, H4, H5, H6, H8,
1160MR
H10

9-30208MRV Tray category #9 (280 x 375mm)

Contents
kg 1.41 1/5 8
PC.
1461 PH1 x 75, PH2 x 100, PH3 x 150

5.5 x 100, 6.5 x 100, 6.5 x 150,

1462
8 x 150, 8 x 175

9-31110MRV Tray category #9 (280 x 375mm)

kg 2.46 1/4
Contents 10
PH1 x 80, PH2 x100, PH3 x 150, PC.
1421
PH2 x 38

3 x 75, 4 x 100, 5.5 x 125,

1422
6.5 x 38, 6.5 x 150, 8 x 175

77
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140

Drawer (579 x 380 mm)

280

9-2544SRV 9-2044SRV Tray category #10 (140 x 375mm)

44
PC.

9 -2 5 4 4 S R V 9 -2 0 4 4 S R V

kg 0.92 1/6
KT NO. Contents

5/32, 3/16, 7/32, 5/32, 3/16, 7/32, 1/4, 9/32, 2752-06G

1/4, 9/32, 5/16, 2235S 5/16, 11/32, 3/8, 7/16, 1/2
9-2544SRV 11/32, 3/8, 7/16, 2178DF
2335S 15/32, 1/2 3, 4.5, 5, 6.5, 8
1025S 2792

5/32, 3/16, 7/32, PH0, PH1, PH2, PH3 2223-02

1/4, 9/32, 5/16, 1025P 2223-04
9-2044SRV 11/32, 3/8, 7/16, H3/64, H1/16, H5/64, H3/32, 2142
2330S 15/32, 1/2 H7/64, H1/8, H9/64, H5/32
5025H

9-2548MRV 9-2048MRV Tray category #10 (140 x 375mm)

48
PC.

9 -2 5 4 8 M R V 9 -2 0 4 8 M R V

kg 1.09 1/6
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 2752-06G

4, 4.5, 5, 5.5, 6, 7, 8, 2235M 11, 12, 13, 14
9-2548MRV 9, 10, 11, 12, 13, 14 2178DF
2335M 3, 4.5, 5, 6.5, 8
1025S 2792
PH0, PH1, PH2, PH3 2223-02
4, 4.5, 5, 5.5, 6, 7, 8, 1025P 2223-04
9-2048MRV 9, 10, 11, 12, 13, 14
2330M H3, H4, H5, H6, H7, H8, H10 2142
5025H

78
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140

Drawer (579 x 380 mm)

280

9-2553MRV Tray category #10 (140 x 375mm)

Contents
kg 0.98 1/6 53
PC.
2335M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

1025H H3, H4, H5, H6, H7, H8, H10

1025S 3, 4.5, 5, 6.5, 8

1025P PH0, PH1, PH2, PH3

T10H, T15H, T20H, T25H, T27H, T30H,
1025U
T40H
1025Z PZ1, PZ2, PZ3

1025T T10, T15, T20, T25, T27, T30, T40

7702-25 2792 2813

276A-04G 213312DF
2223-02
2745
2223-04

9-3523MRV10 Tray category #10 (140 x 375mm)

Contents
kg 1.73 1/6 23
6, 7, 8, 9, 10, 11, 12, 13, 14,
PC.
3335M
15, 16, 17, 19, 21, 22, 23, 24
3771-08G 3792
3571-08 3452-08G
3293-03
3293-06

9-4147PRV Tray category #10 (140 x 375mm)

Contents
kg 1.81 1/5 17
PC.
40D0 H6, H8, H10

4066 M8, M9, M10, M12, M14

T20, T25, T27, T30, T40
4023
T45, T50, T55, T60

9-4401MPV Tray category #10 (140 x 375mm)

Contents
kg 2.23 1/6 11
PC.
4945MX 17, 19, 21

4535M 17, 19, 32, 34, 36

4415M 17, 19, 21

9-90135MRV Tray category #10 (140 x 375mm)

Contents
kg 1.81 1/6 15
PC.
8x10, 10x12, 11x13, 12x14,
1930
17x19, 19x22
H1.5, H2, H2.5, H3, H4, H5, H6,
1120MR
H8, H10

79
 560

Tray #10

Tray #10

375
Tray #9

Tool Set Content 140

Drawer (579 x 380 mm)

280

9-40104GPV Tray category #10 (140 x 375mm)

Contents
kg 1.08 1/8 4
PC.
6311-08 6111-06

6231-07 6319-11C

9-40113GPV Tray category #10 (140 x 375mm)

kg 1.12 1/8
Contents 3
PC.
6011-10R 6314-05

6516-10C

9-44214GPV Tray category #10 (140 x 375mm)

Contents
kg 1.08 1/8 4
PC.
67HS-07 67HB-07

68SS-07 68SB-07

9-90118PRV Tray category #10 (140 x 375mm)

Contents
kg 0.91 1/6 8
PC.
76104-05 7821-30
76403-06
76217-06 76404-06
76220-07 76405-65
76406-07

9-90305TQV Tray category #10 (140 x 375mm)

Contents
kg 0.91 1/6 5
PC.
7971-07 77141-08

77335-25 9BM120

79093-05C

9-30216MRV Tray category #10 (140 x 375mm)

Contents
Kg
0.71 1/6 6
PC.
1461 PH2 x 100, PH3 X 150

1462 5.5 X 100, 6.5 X 150

1411 PH2 x 38

1412 6.5 x 38

80
 ▪ Do not move the box / trolley unit
unless you have closed the cover and
The Way To Fill Your Drawer locked the drawers
▪ Never open more than one loaded
How to complete your tool trolley set and tool chest set drawer at the same time
The drawer of tool chest includes one top drawer and different size ▪ Watch for sharp edges, we suggest to
put on gloves before you lift the unit

Drawer (646x290 mm)

Drawer (172x275 mm)
642
163

Tray #1

286

263
Tray #2

................................................................................................................................................................................................................................
Drawer (572x275 mm)

554 560
375 185
185 185 185

265
Tray #3 Tray #4 Tray #5
260

265
Tray #5 Tray #5 Tray #5

560
................................................................................................................................................................................................................................
Drawer (579x380 mm)
265 30 265 265 30 265

185
Tray #5

375 Tray #4

375
Tray #4 P* Tray #4 P*

Tray #5

265 30 265 560 560 560

187

Tray #7 Tray #7 Tray #7

185

Tray #5 Tray #5
375

375
Tray #9
375
375

P* Tray #6
Tray #7 Tray #7 Tray #7
Tray #5 Tray #5

280 280
560 560
560 560
Tray #10

Tray #10

Tray #10

Tray #10

Tray #10

Tray #10
375
375

Tray #8 Tray #8 Tray #8 Tray #9 Tray #9 Tray #9

375

375

187 280 280 140

140

................................................................................................................................................................................................................................
510
Drawer (504 x 195 mm)
500
205

Tray #11
190

Tray #12

................................................................................................................................................................................................................................
87402 Drawer (470 x 220 mm) #13
87408 Drawer (530 x 220 mm) #14

460

510
105

Tray #13

520
200

Tray #15
Tray #14
93

81
 101
PC. Tool Trolley Contents
Contents No. 932-009MRD Kg 19.8 CUFT 2.41

9-4333MR #4 P.98 9-4120PR #5 P.108 9-1219MR01 #4 P.101 9-1711MR #4 P.102 9-90106SR #4 P.106 9-40103GP #5 P.109
9-4119PR #5 P.108 84700612B P* 84700612B P*
84700612B P*

1110MR P.298 34423-1A P.279

101
PC. Tool Trolley Set

5
Kg 75.8 932-009MR 932-009MR-G 932-009MR-B
CUFT 14.65 (87432-5B P.39) (87432-5B-G P.39) (87432-5B-B P.39)

5
Kg 78.8 9632-009MR 9632-009MR-G 9632-009MR-B
CUFT 18.05 (87632-5B P.43) (87632-5B-G P.43) (87632-5B-B P.43)

7
Kg 85.94 9634-009MR 9634-009MR-G 9634-009MR-B
CUFT 18.05 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-009MR 9934-009MR-G
Kg
7
89.5
9934-009MR-B
CUFT 14.84 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 94.8 9934F-009MR 9934F-009MR-G 9934F-009MR-B
CUFT 15.11 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

82
 144
PC. Tool Trolley Contents
Contents No. 932-010MRD Kg 17.5 CUFT 1.86

9-4328MR #4 P.98 9-5575MR #4 P.99 9-1216MR01 #4 P.100 9-1709MR #4 P.102 9-90106SR #4 P.106 9-31106MR #5 P.109
84700612B P* 84700612B P* 9-40103GP #5 P.109
84700612B P*

34423-1A P.279

144
PC. Tool Trolley Set

5
Kg 73.5 932-010MR 932-010MR-G 932-010MR-B
CUFT 14.1 (87432-5B P.39) (87432-5B-G P.39) (87432-5B-B P.39)

5
Kg 76.5 9632-010MR 9632-010MR-G 9632-010MR-B
CUFT 17.5 (87632-5B P.43) (87632-5B-G P.43) (87632-5B-B P.43)

7
Kg 83.64 9634-010MR 9634-010MR-G 9634-010MR-B
CUFT 17.5 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-010MR 9934-010MR-G
Kg
7
87.2
9934-010MR-B
CUFT 14.29 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 92.5 9934F-010MR 9934F-010MR-G 9934F-010MR-B
CUFT 14.56 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

83
 170
PC. Tool Trolley Contents
Contents No. 941-101MRD Kg 24.8 CUFT 2.54

9-4026MR02 #1 P.94 9-3023MR01 #4 P.98 9-2526MR

#5 P.107

9-22308PR #4 P.106 9-31106MR 9-4120PR 9-4119PR 9-1303MR

#5 P.109 #5 P.108 #5 P.108 #5 P.108

9-1711MR #4 P.102 9-1216MR #4 P.100 9-90103RR #4 P.105 9-20110MR #5 P.109

84700612B P* 9-40103GP #5 P.109
84700612B P*

9-4128FR #5 P.109 1010PR P.455

170
PC. Tool Trolley Set
Kg Kg 109.2 Kg 125.2
106.2
5 5 7
CUFT 18.31 CUFT 22.15 CUFT 19.21

941-101MR 9641-101MR 9644-101MR

( 87411-6B P.53
87432-5B P.39 ) ( 87411-6B P.53
87632-5B P.43 ) ( 87411-6B P.53
87634-7B P.43 )

84
 173
PC. Tool Trolley Contents
Contents No. 932-000MRD Kg 24.7 CUFT 2.10

9-4333MR #4 P.98 9-7540MR #4 P.99 9-1216MR01 #4 P.100 9-1711MR #4 P.102 9-90131MR #4 P.100 9-31110MR #4 P.106
84700612B P* 84700612B P* 84700612B P*

9-22108MR #4 P.106 9-22308PR #4 P.106 9-90103PP #4 P.105 9-40207GP #4 P.104 1006PR #4 P.455
84700612B P* 84700612B P*

173
PC. Tool Trolley Set

5
Kg 80.70 932-000MR 932-000MR-G 932-000MR-B
CUFT 14.34 (87432-5B P.39) (87432-5B-G P.39) (87432-5B-B P.39)

5
Kg 83.7 9632-000MR 9632-000MR-G 9632-000MR-B
CUFT 17.74 (87632-5B P.43) (87632-5B-G P.43) (87632-5B-B P.43)

7
Kg 90.84 9634-000MR 9634-000MR-G 9634-000MR-B
CUFT 17.74 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-000MR 9934-000MR-G
Kg
7
94.4
9934-000MR-B
CUFT 14.53 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 99.7 9934F-000MR 9934F-000MR-G 9934F-000MR-B
CUFT 14.8 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

85
 179
PC. Tool Trolley Contents
Contents No. 932-008MRD Kg 20.52 CUFT 2.41

9-4522MR #4 P.97 9-3523MR #4 P.98 9-1219MR01 #4 P.101 9-90315MR #4 P.102 9-91120MR #4 P.104 9-31909PR #4 P.107
84700612B P* 84700612B P* 84700612B P*

9-90103PP01 #4 P.105 9-40207GP #4 P.104 9-4120PR #5 P.108 9-31106MR #5 P.107 1010PR #4 P.455 9DC23 P.619
84700612B P* 9-4119PR #5 P.108 9-2526MR #5 P.107
84700612B P*

179
PC. Tool Trolley Set

5
Kg 76.52 932-008MR 932-008MR-G 932-008MR-B
CUFT 14.65 (87432-5B P.39) (87432-5B-G P.39) (87432-5B-B P.39)

5
Kg 79.52 9632-008MR 9632-008MR-G 9632-008MR-B
CUFT 18.05 (87632-5B P.43) (87632-5B-G P.43) (87632-5B-B P.43)

7
Kg 86.66 9634-008MR 9634-008MR-G 9634-008MR-B
CUFT 18.05 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-008MR 9934-008MR-G
Kg
7
90.22
9934-008MR-B
CUFT 14.84 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 95.52 9934F-008MR 9934F-008MR-G 9934F-008MR-B
CUFT 15.11 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

86
197
PC. Tool Trolley Contents
Contents No. 934-001MRD Kg 28.7 CUFT 3.7

9-90408TQ #6 P.110 9-4516MR #4 P.97 9-5575MR #4 P.99 9-1711MR #4 P.102 9-1218MR #4 P.101
84700612B P* 84700612B P*

9-22108MR #4 P.106 9-31909PR #4 P.107 9-90310MR #4 P.107 9-90106SR #4 P.106 9-90205GN01 9-4128FR #5 P.109
84700612B P* 84700612B P*
#4 P.105 9-40103GP #5 P.109
84700612B P*

9DC23
7962-04 P.619
42114GP P.340
P.462
2121-18 P.631

14210212 P.366
7963-04
14226512 P.366
P.462 1108MR P.298

197
PC. Tool Trolley Set

7
Kg 92.7 934-001MR 934-001MR-G 934-001MR-B
CUFT 15.94 (87434-7B P.39) (87434-7B-G P.39) (87434-7B-B P.39)

7
Kg 94.84 9634-001MR 9634-001MR-G 9634-001MR-B
CUFT 15.94 (87634-7B P.43) (87634-7B-G P.43) (87634-7B-B P.43)

9934-001MR 9934-001MR-G
Kg
7
98.4
9934-001MR-B
CUFT 16.13 (87934-7B P.45) (87934-7B-G P.45) (87934-7B-B P.45)

7
Kg 103.7 9934F-001MR 9934F-001MR-G 9934F-001MR-B
CUFT 16.4 (87934-7BF P.45) (87934-7BF-G P.45) (87934-7BF-B P.45)

87
 69
PC. Tool Chest Set
901-068MR Kg 18.8 CUFT 2.05 901-069MR Kg 18.4 CUFT 2.05

9-4338MR #11 P.114 (901-069MR use) 9-4338MR01 #11 P.114 (901-068MR use)

9-90121MR #12 P.115 9-90104GP #12 P.115

87401-3 P.54
9-31006MR #12 P.115

74
PC. Tool Chest Set
901-073MR Kg 19.5 CUFT 2.05

9-4338MR03 #11 P.114

9-90126MR #12 P.115 9-90104GP #12 P.115

87401-3 P.54
9-31006MR #12 P.115

88
219
PC. Tool Chest Set
911-000CR Kg 50.5 CUFT 6.10 911-000CR02 Kg 50.8 CUFT 6.10

9-7069CR #1 P.94 (911-000CR use) 9-7069CR01 #1 P.94 (911-000CR02 use)

9-90129CR #3 P.96 9-90138CR #3 P.96

9-2548CR 9-2548CR01 9-42114GP 9-40102GP 9-90128SR #3 P.95

7911-12 P.481 87411-6B P.53 #2 P.95 #2 P.95 #2 P.95 #2 P.95
(911-000CR use) (911-000CR02 use)

107
PC. Tool Chest Set
911-002CR Kg 40.5 CUFT 5.12

4042CR #476 x 282mm P.195 20107SR 20109MR

P.400 P.400

9-42144GP #4 P.105 9-31106MR

#5 P.109

87411-6B P.53 7811-16 P.452 9-90138CR #3 P.96

89
 235
PC. Tool Chest Set
911-003CR Kg 46.16 CUFT 6.10 911-003CR01 Kg 46.16 CUFT 6.10

9-7078CR #1 P.94 (911-003CR use) 9-7078CR01 #1 P.94 (911-003CR01 use)

9-90220MR #3 P.96 (911-003CR use) 9-90220MR01 #3 P.96 (911-003CR01 use)

9-90154CR #3 P.97 (911-003CR use) 9-90154CR01 #3 P.97 (911-003CR01 use)

87411-6B P.53 9-90329CR #3 P.96 9-2548CR01 9-2548CR 9-42114GP 9-40102GP

#2 P.95 #2 P.95 #2 P.95 #2 P.95
(911-003CR use) (911-003CR01 use)

90
Tool Box Set
62
902-062MR PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
kg 14.4 CUFT 1.22
Contents

68
9-4116FR P.116
902-068MR PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
9-1217MR P.117
kg 15.9 CUFT 1.22
Contents
9-90120MR P.117 8, 10, 11, 12, 13, 14, 15, 16, 17,
1060
18, 19, 21, 22, 24
H1.5, H2, H2.5, H3, H4, H5, H6,
9-30206MR P.117 1120MR
H8, H10

1421 PH1 x 80, PH2 x 38, PH3 x 150

9-4319MR P.116
1422 5.5 x 100, 6.5 x 38, 8 x 175

9-40203GP P.117 6111-07 6311-06 6511-10

7821-30 3611-12P 76104-05

76217-06 76403-05 76405-65
902-164MR 63 76223-08 76404-06 76406-07
PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
7911-12 9-4116FR P.116
Contents
kg 14 CUFT 1.22 9-4319MR01 P.116

8, 10, 12, 13, 14, 17, 19, 21, 22,

1060
24 81
H1.5, H2, H2.5, H3, H4, H5, H6, 902-084MR01 PC.
1120MR
H8, H10
87402 P.55-Overall size (mm) : 470 x 220 x 260
1421 PH1 x 80, PH2 x 38, PH3 x 150 kg
Contents 19.24 CUFT 1.22
1422 5.5 x 100, 6.5 x 38, 8 x 175
8, 9, 10, 11, 12, 13, 14, 15, 16,
1060
6111-07 6311-06 6511-10 17, 19, 21, 22, 24

7811-16 3611-08R 76104-05 1421 PH1 x 100, PH2 x 150, PH3 x 150

76217-06 76403-05 76405-65 1422 6.5 x 100, 6.5 x 150, 8 x 150

76223-08 76404-06 76406-07
6231-07 6311-06 6516-10C
3611-08R
6031-07R 6463-08C
3611-12R
9-4116FR P.116 9-4219MR P.116
7811-16 7851-16 76104-05
76105-06
76213-04
902-065MR 65 76215-05 76306-05
76403-05
PC. 76404-06
76220-07
87402 P.55-Overall size (mm) : 470 x 220 x 260
kg 14.7
KT NO. Contents CUFT 1.22 20218MR 9-4116FR03 P.116 9-4219MR07 P.116
1421 PH1 x 80, PH2 x 38, PH3 x 150
1422 5.5 x 100, 6.5 x 38, 8 x 175

3611-08P 6111-07 6311-06

6511-10 7811-16 76104-05

76217-06 76403-05 76405-65
76223-08 76404-06 76406-07

9-90115MR P.117 9-1716MR P.117

9-4116FR P.116 9-4319MR P.116

91
 Tool Box Set
84
902-084SR PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
kg 21.55 CUFT 1.22
Contents
1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
4230S 103
7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4
902-103MR PC.
1/4, 5/16, 3/8, 7/16, 1/2, 9/16,
5060 5/8, 11/16, 3/4, 13/16, 7/8, 87402 P.55-Overall size (mm) : 470 x 220 x 260
15/16, 1, 1-1/16, 1-1/8, 1-1/14 kg 24.8
Contents CUFT 1.22
1421 PH1 x 100, PH2 x 150, PH3 x 150
8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
1060
1422 6.5 x 100, 6.5 x 150, 8 x 150 18, 19, 21, 22, 23, 24, 27, 30, 32
H1.5, H2, H2.5, H3, H4, H5, H6,
3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 1120MR
1130SR H8, H10
3/8
T10H, T15H, T20H, T25H, T27H,
6231-07 6311-06 6516-10C 1147R
T30H, T40H
3611-08R PH0 x 60, PH1 x 100, PH2 x 100,
6031-07R 6463-08C 1421
3611-12R PH3 x 150
7811-16 7851-16 76104-05 3 x 75, 4 x 100, 5 x 75, 5.5 x 125,
76105-06 1422
6.5 x 150, 8 x 175
76213-04 76403-05
76215-05 76306-05 6111-07 6311-06 6516-10C
76404-06
76220-07 7821-80 3611-12R 7911-12
6231-08 6431-10 6011-10R
9-4116FR03 P.116 9-4219SR08 P.116 76220-07
76226-12 79093-03C
76402-45 76404-06 76406-07 76412-09
76403-05 76405-65 76408-08 76414-10
88
902-089MR01 PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
kg 19.5 CUFT 1.22
Contents
1812MR P.318 9-4116FR P.116 9-4319MR01 P.116
6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
1060
16, 17, 18, 19, 20, 21, 22, 24
6 x 7, 8 x 10, 11 x 13, 12 x 13, 902-109MR 109
1900 PC.
17x19, 22 x 24
87402 P.55-Overall size (mm) : 470 x 220 x 260
H1.5, H2, H2.5, H3, H4, H5, H6,
1120MR Contents
kg 24.99
CUFT 1.22
H8, H10
T10H, T15H, T20H, T25H, T27H, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
1147R 1060
T30H, T40H 19, 21, 22, 23, 24, 27, 30, 32
1421 PH2 x 38, PH3 x 150 H1.5, H2, H2.5, H3, H4, H5, H6, H8,
1120MR
H10
1422 3 x 75, 5 x 100 T10H, T15H, T20H, T25H, T27H, T30H,
1147R
T40H
6111-07 6311-06 6516-10C
PH0 x 60, PH1 x 100, PH2 x 100,
7821-80 3611-08R 1421
7911-12 PH3 x 150
3 x 75, 4 x 100, 5 x 75, 5.5 x 125,
1422
6.5 x 150, 8 x 175

6111-07 6311-06 6516-10C 7811-16 3611-12R

1812MR P.318 9-4116FR P.116 9-4319MR01 P.116
76220-07
6231-08 6431-10 6011-10R 76226-12 79093-05C
76402-45 76404-06 76406-07 76412-09
7911-12 76403-05 76405-65 76408-08 76414-10

9-4116FR P.116

9-4319MR01 P.116 1812MR P.318 1306MR P.305

92
Tool Box Set
132
902-132CR PC.
87402 P.55-Overall size (mm) : 470 x 220 x 260
kg 24.55 CUFT 1.22
Contents
PH0 x 60, PH1 x 100, PH2 x 100,
1421
PH3 x 150
3 x 75, 4 x 100, 5 x 75, 5.5 x 125, 77
1422
6.5 x 150, 8 x 175 908-077CR PC.
3611-08P 6711-06 87408 P.55-Overall size (mm) : 530 x 220 x 260
79093-03C
3611-12P
Contents

6231-07 6111-07 6311-06 6516-10C 6721-10

9-4029CR P.118 9-90111MR P.118

20419PR 7811-12 6011-10R 7911-12 2121-18

11205SQ
7971-07 76220-07 76104-05 P.476 9-4156PR P.118 9-30206MR P.117
Enjoy your work

20208MR01
1005GQ 1226MR 9-1215MR03 P.118
1812MR 30617MR 20208SR01 9-6010MR P.118
P.482 P.305
P.318 P.377 P.397
KT NO. SPEC. kg CUFT

9-4116FR P.116 9-4319MR01 P.116 908-077CR-A 87408 6.7 1.3

908-077CR-D 77 PC. tool box contents 19.82 0.99

93
 642

Tool Set Content

286
Tray #1
Drawer
(646x290)

9-4526MR 9-4026MR02 Tray category #1 (642 x 286mm)

9-4526MR 9-4026MR02

26
PC.

kg 4.6 1/5
KT NO. Contents

9-4526MR 4768-10F 4572-12 4251-05R

10, 11, 12, 13, 14, 463521R
4335MR 15, 16, 17, 18, 19, 4251-10R
20, 21, 22, 23, 24,
27, 30, 32
9-4026MR02 4768-10P
463021R 4452-15FR
4330MR

9-7069CR 9-7069CR01 Tray category #1 (642 x 286mm)

9-7069CR 9-7069CR01
69
PC.

7911-12
kg 8.8 1/4
KT NO. Contents

6, 7, 8, 9, 10, 11, 12, 13, 14,

3571-08
3779-08G 3330M 15, 16, 17, 19, 20, 21, 22 463521R 463516R
9-7069CR
3/8, 7/16, 1/2, 9/16, 5/8,
4779-10GR 3330S 11 /16, 3/4, 13 /16 3452-08F 4452-15FR
10, 11, 12, 13, 14, 15, 16, 17, 4251-05R
18, 19, 20, 21, 22, 23, 24, 27, 4251-10R
4572-10 3221-03
3769-08P 4330MR 30, 32 3221-06
9-7069CR01
3/8, 7/16, 1/2, 9/16, 5/8, 11 /16,
4768-10P
4330SR 3/4, 13 /16, 7/8, 15/16, 1 3792 4791R 3812 4813

9-7078CR 9-7078CR01 Tray category #1 (642 x 286mm)

9-7078CR 9-7078CR01

78
PC.

kg 8.67 1/2
KT NO. Contents

8, 9, 10, 11, 12, 13, 14, 15,

10, 12, 13, 14, 15,
3769-08P 3330M 16, 17, 18, 19, 20, 21, 22
9-7078CR 3/8, 7/16, 1/2, 9/16, 5/8, 3235M 16, 17, 18, 19, 22 363516
4768-10P 3330S 11/16, 3/4, 13/16
10, 11, 12, 13, 14, 15, 16, 4462-18F 3221-03 4251-05R
17, 18, 19, 20, 21, 22, 23, 3221-10 4251-10R
3779-08G 4330MR 24, 25, 27, 28, 30, 32
9-7078CR01 3/8, 7/16,1/2, 9/16, 5/8,
11/16, 3/4, 13/16, 7/8, 3792 4791R 3812 4813
4779-10GR 4330SR 15/16, 1, 1-1/8, 1-1/4

94
 163

Tool Set Content

263
Tray #2

Drawer
(172x275)

9-2548CR 9-2548CR01 Tray category #2 (163 x 263mm)

9-2548CR 9-2548CR01

48
PC.

kg 1.28 1 / 10
KT NO. Contents

4, 5, 5.5, 6, 7, 8, 9, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10,

9-2548CR 2235M 10, 11, 12, 13 2335M 11, 12, 13

2779-55G
5/32, 3/16, 7/32, 1/4, 9/32, 5/32, 3/16, 7/32, 1/4, 9/32,
2235S 5/16, 11/32, 3/8, 7/16, 1/2 2335S 5/16, 11/32, 3/8, 7/16, 1/2

9-2548CR01 2769-55P 2792 2813 2221-02

2221-04

9-40102GP Tray category #2 (163 x 263mm) 9-42114GP Tray category #2 (163 x 263mm)

2 4
PC. PC.

kg kg 0.6 1 / 10
Contents 1.0 1 / 10 Contents

6011-10R 6511-10 68HS-07 68SS-07

68HB-07 68SB-07

554
260

Tray #3
Drawer (572x275)

9-90128SR Tray category #3 (554 x 260mm)

Contents
kg 4.8 1/4 28
PC.
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,
5060
11/16, 3/4, 13/16, 7/8, 1
1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16,
5970 5/8 x 11/16, 3/4 x 7/8, 15/16 x 1,
1-1/16 x 1-1/8

76105-06 7811-16
76215-05
76217-06 76404-06
76220-07 76406-07
76224-10 76408-08

95
 554

Tool Set Content

260
Tray #3
Drawer (572x275)

9-90138CR Tray category #3 (554 x 260mm)

kg 4.8 1/4
Contents 38
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, PC.
1060
19, 20, 21
1900 8 x 9, 10 x 11, 12 x 13, 14 x 15, 18 x 19
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15,
1970
16 x 17, 18 x 19
1930 10 x 11, 12 x 14, 14 x 17
1/4 x 5/16, 3/8 x 7/16, 7/16 x 1/2,
5900
9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8

3611P 8, 12

9-90329CR Tray category #3 (554 x 260mm)

kg 3.37 1/4
Contents 29
6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, PC.
1060
18, 19, 21
5060 7/16, 1/2, 9/16, 5/8, 11/16, 3/4

10D0 10, 12, 13, 14, 17, 18, 19

3611R 6, 8

9-90129CR Tray category #3 (554 x 260mm)

kg 2.5 1/4
Contents 29
PH0 x 60, PH1 x 80, PH2 x 38, PC.
1421
PH2 x 100, PH3 x 150
3 x 75, 6.5 x 38, 6.5 x 100, 6.5 x 150,
1422
8 x 175

1130SR 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

H1.5, H2, H2.5, H3, H4, H5, H6, H8,

1120MR
H10

6111-07 6231-07

6311-06

9-90220MR 9-90220MR01 Tray category #3 (554 x 260mm)

9-90220MR 9-90220MR01
20
PC.

kg 2.51 1/4
KT NO. Contents

H3, H4, H5, H6, PH1x80, PH2x100

14280204 3025 H8, H10, H12 1421
9-2548CR
1422 4x100, 5.5x125, 6.5x150, 8x175
14240204 T30, T40
3023

9-2548CR01 14232004
14232504 6111-08 6231-08 6311-08

96
Tool Set Content 554

260
Tray #3
Drawer (572x275)

9-90154CR 9-90154CR01 Tray category #3 (554 x 260mm)

kg 2.86 1/4
KT NO. Contents 54
PC.
H2.5, H3, H4, H5,
1130MR H6, H8, H10

9-90154CR 3/32, 1/8, 5/32,

1130SR 3/16, 1/4, 5/16, 3/8
1032CQ01
7811-16
74030
76717-05
9-90154CR01 761 Ø 4 x 120
1032CQ
764 Ø 3 x 125
Ø 4 x 150
Ø 5 x 165

265 30 265 30 265

375 185

185
Tray #5
Tray #5

265

Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-4516MR Tray category #4 (375 x 265mm)

kg 3.12 1 / 10
Contents 16
8, 10, 11, 12, 13, 14, 17, 19, 21, 23,
PC.
4335MR
24

4791R 4768-10F 4452-15FR

4251-05R
4572-10
4251-10R

9-4522MR Tray category #4 (375 x 265mm)

kg 2.96 1 / 10
Contents 22
8, 10, 11, 12, 13, 14, 15, 16, 17, 18,
PC.
4335MR
19, 20, 21, 22, 24
463521R 463516R 4791R

4768-10F 4251-03R, 4251-05R, 4251-10R

97
 Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-3523MR 9-3023MR01 Tray category #4 (375 x 265mm)

9-3523MR 9-3023MR01

23
PC.

kg 1.38 1 / 10
KT NO. Contents

9-3523MR 3769-08F 3221-03 3452-08F

3335M 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 3221-06
20, 21, 22
9-3023MR01 3769-08P 3792 3571-08
3330M

9-4328MR Tray category #4 (375 x 265mm)

kg 4.6 1/6
Contents 28
8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
PC.
4335MR
18, 19, 20, 21, 22, 23, 24, 27, 29, 32
4027 T55H, T60H

4791R 4768-10F 4452-15FR

4251-05R
4572-10
4251-10R

9-4333MR 9-4333MR03 Tray category #4 (375 x 265mm)

9-4333MR 9-4333MR03
33
PC.

kg 5.4 1/6
KT NO. Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
9-4333MR 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32
4755-10G 4335MR
4251-03R
9-4333MR03 4251-05R
4779-10GR 463521R 463516R 4791R 4572-12 4452-15FR 4251-10R

98
Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-5575MR Tray category #4 (375 x 265mm)

kg 4.15 1/6
Contents 75
PC.
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13
2335S 1/4, 3/8, 1/2
3235M 8, 10, 12, 14, 17
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
3335M
17, 18, 19, 21, 22
2375M E4, E5, E6, E7, E8 Contents

3375M E10, E12, E14, E16, E18 366516 366521 3221-16

2769-55F 3769-08F 3789-11F
2037 T10H, T15H, T20H, T25H, T27H, T30H
2221-02 3221-03
2221-04 3221-06 2571-45
2033 T20, T25, T30, T40
2452-05F 3452-08F 3571-08
3027 T40H, T45H, T50H 2792 3792

9-7537MR Tray category #4 (375 x 265mm)

kg 2.28 1/6
Contents
37
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 PC.
T20, T25, T27, T30, T40, T45, T50, T55,
4023
T60
H3, H4, H5, H6, H7, H8, H10, H12,
4025
H14
2779-55G 2571-45 2792
2221-02
2452-05F 2141
2221-04

9-7540MR Tray category #4 (375 x 265mm)

kg 3.50 1/5
Contents
40
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 PC.

2375M E4, E5, E6, E7, E8

4375M E10, E12, E14, E16, E18, E20
4435M 10, 11, 12, 13, 14, 17, 19, 21, 22, 24
2792 2755-55G 2571-45
2221-02
2221-04 2177DF 2452-05F

9-93523MR Tray category #4 (375 x 265mm)

kg 2.63 1/6
Contents
31
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, PC.
3335M
17, 19, 20, 21, 22
H1.5, H2, H2.5, H3, H4, H5, H6, H8,
1120MR
H10

3792 3769-08F 3452-08F 3571-08 3221-03

3221-06

99
 Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-90131MR Tray category #4 (375 x 265mm)

kg 3.1 1 / 10
Contents
31
T20, T25, T27, T30, T40, T45, T50, T55, PC.
4033
T60
H4, H5, H6, H7, H8, H10, H12, H14,
4035
H17
H1.5, H2, H2.5, H3, H4, H5, H6, H8,
1120MR
H10
1930 10 x 11, 12 x 14, 14 x 17
3204 (Ø 60 ~ 140)

9-91024MR50 Tray category #4 (375 x 265mm)

kg 2.2 1/5
Contents
24
4025 H6, H7, H8, H10, H12 PC.

4036 M8, M10, M12, M14

4049 M10, M12, M13

3039 M7, M8, M9

4813 1/2"F x 3/8"M

ST20208MY

9-1205MR Tray category #4 (375 x 265mm)

5
PC.

kg 2.70 1/6
KT NO. Contents

1060 27, 28, 29, 30, 32

9-1216MR 9-1216MR01 9-1216MR03 Tray category #4 (375 x 265mm)

kg 3.20 1/6
16
KT NO. Contents PC.
6, 8, 10, 12, 13, 14, 16, 17, 19,
9-1216MR 21, 22, 24, 26, 27, 29, 32
6, 8, 10, 11, 13, 14, 16, 17, 18,
9-1216MR01 19, 21, 22, 24, 27, 30, 32
1060
8, 10, 11, 12, 13, 14, 15, 17, 18,
9-1216MR03 19, 21, 22, 24, 27, 30, 32

100
Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-1218MR Tray category #4 (375 x 265mm)

18
kg
PC.
KT NO. Contents 2.12 1/6

6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18,

1060
19, 21, 22, 24
1930 8 x 10, 9 x 11

9-1219MR01 Tray category #4 (375 x 265mm)

19
PC.

kg 2.25 1/6
KT NO. Contents

6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,

1060
19, 20, 21, 22, 23, 24

9-1272MR Tray category #4 (375 x 265mm)

12
PC.

kg 1.45 1/5
KT NO. Contents

1067 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22

9-1282MR Tray category #4 (375 x 265mm)

KT NO. Contents
kg 1.05 1 / 10 12
PC.
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
10D0
19

9-1608MR Tray category #4 (375 x 265mm)

8
PC.

kg 1.5 1/6
KT NO. Contents

6 x 7, 8 x 9, 10 x 11, 12 x 13,
1960
14 x 15, 16 x 17, 18 x 19, 20 x 22

101
 Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-1609MR Tray category #4 (375 x 265mm)

9
PC.

kg 1.93 1/6
KT NO. Contents

8 x 9, 10 x 12, 11 x 13, 12 x 14,

1960 14 x 17, 17 x 19, 19 x 21, 22 x 24,
23 x 26

9-1709MR Tray category #4 (375 x 265mm)

9
PC.

kg 2.38 1/6
KT NO. Contents

8 x 9, 10 x 12, 11 x 13, 12 x 14,

1970 14 x 17, 17 x 19, 19 x 21, 22 x 24,
23 x 26

9-1711MR Tray category #4 (375 x 265mm)

11
PC.

kg 2.80 1/6
KT NO. Contents

6 x 7, 8 x 9, 10 x 11, 12 x 13,
1970 14 x 15, 16 x 17, 18 x 19, 20 x 22,
21 x 23, 24 x 27, 30 x 32

9-90315MR Tray category #4 (375 x 265mm)

kg 2.6 1/6
KT NO. Contents 15
PC.
8 x 10, 10 x 12, 12 x 14, 14 x 17, 17 x 19,
1900
21 x 23, 22 x 24
8 x 10, 10 x 12, 12 x 14, 14 x 17, 17 x 19,
1970
21 x 23, 22 x 24

79093-05C

9-1812MR 9-1912MR Tray category #4 (375 x 265mm)

KT NO. Contents
kg 3.69 1/6 12
PC.

9-1812MR 1080
8, 10, 11, 12, 13, 14, 16, 17,
18, 19, 22, 24
9-1912MR
1081

102
Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-1838MR Tray category #4 (375 x 265mm)

8
PC.

kg 2.57 1/6
KT NO. Contents

1084 8, 10, 11, 12, 13, 15, 17, 19

9-1905MR Tray category #4 (375 x 265mm)

KT NO. Contents
kg 0.82 1 / 10 5
PC.
10 x 12, 11 x 13, 14 x 17, 16 x 18,
1950
19 x 22

9-1C08MR Tray category #4 (375 x 265mm)

KT NO. Contents
kg 0.91 1 / 10 8
PC.
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15,
19C0
16 x 17, 18 x 19, 20 x 22

9-10115MR 9-10215MR Tray category #4 (375 x 265mm)

15
kg 1.9 1 / 10 PC.
KT NO. Contents

373202R
9-10115MR 3731M
8, 9, 10, 11, 12,
13, 14, 15, 16, 373203R
17, 19, 22
9-10215MR 3732M 373204R

9-12120MR Tray category #4 (375 x 265mm)

10
KT NO. Contents
kg 1.27 1/6 PC.

3731M 8, 10, 12, 13, 14, 15, 17, 19

373204R 373203R

103
 Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-90109MN Tray category #4 (375 x 265mm)

8
KT NO. Contents
kg 2.28 1/6 PC.

8x10, 10x12, 11x13, 12x14, 14x17,

1970
17x19

6011-10N 3611-12R

9-91120MR Tray category #4 (375 x 265mm)

20
KT NO. Contents
kg 2.40 1/6 PC.

H1.5, H2, H2.5, H3, H4, H5, H6, H8,

1120MR
H10

1930 8x10, 10x12, 11x13, 14x17

3731M 8, 10, 12, 13, 14

6011-10N 3611-12R

9-40207GP 9-40207GP01 Tray category #4 (375 x 265mm)

9-40207GP 9-40207GP01

7
PC.

kg
KT NO. Contents

9-40207GP 1 / 10
6111-08 6211-06 6311-06 68HS-07 68HB-07 68SS-07 68SB-07
1.5
9-40207GP01 1/6
6463-08C 6211-06 6311-06 67HS-07 67HB-07 67SS-07 67SB-07

9-40604GP Tray category #4 (375 x 265mm)

4
PC.
kg 1.98 1/6
Contents

6116-07A 6216-06A

6318-08A 6516-10A

104
Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-42144GP Tray category #4 (375 x 265mm)

4
PC.
kg 1.63 1/8
Contents

6011-10N 6111-08

6211-06 6311-06

9-90205GN 9-90205GN01 Tray category #4 (375 x 265mm)

5
PC.

9-90205GN 9-90205GN01
kg 1.98 1/6
Contents

9-90205GN 6313-06
6011-10N 6111-07

9-90205GN01 6311-06 74410 6463-08C

9-90103PP 9-90103PP01 9-90103PP02 Tray category #4 (375 x 265mm)

9-90103PP 9-90103PP01 9-90103PP02

3
PC.

kg
KT NO. Contents

9-90103PP 3611-12P 6511-10 7821-30

2.3
9-90103PP01 3611-12P 6511-10 7811-16 1 / 10

9-90103PP02 3611-12P 6511-10 7821-80 2.51

9-90103RR Tray category #4 (375 x 265mm)

3
PC.

kg 2.3 1/5
Contents

3611-12R 6511-10 7821-30

105
 Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-90106SR Tray category #4 (375 x 265mm)

Contents
kg 2.05 1/4 6
PC.
76404-06
76105-06 7822-30 7842-35
76405-65
76406-07

9-22108MR Tray category #4 (375 x 265mm)

8
PC.

kg 1.10 1 / 10
KT NO. Contents

1160MR H2, H2.5, H3, H4, H5, H6, H8, H10

9-22308PR Tray category #4 (375 x 265mm)

8
PC.

kg 1.10 1 / 10
KT NO. Contents

T10H, T15H, T20H, T25H, T30H, T40H,

1163R
T45H, T50H

9-30110CR Tray category #4 (375 x 265mm)

10
PC.
kg 1.4 1/6
KT NO. Contents

1450 6, 7, 8, 9, 10, 11, 12, 13

5450 1/4, 5/16

9-31110MR Tray category #4 (375 x 265mm)

10
PC.
kg 1.0 1 / 10
KT NO. Contents

PH1 x 80, PH2 x 38,

1421
PH2 x 100, PH3 x 150
3 x 75, 4 x 100, 5.5 x 125,
1422
6.5 x 38, 6.5 x 150, 8 x 175

106
Tool Set Content
265 30 265 30 265
375 185

185
Tray #5

Tray #5

265
Tray #4

375

375
Tray #4 P* Tray #4 Tray #4 P*

Tray #5
Drawer (572x275)
Drawer (579x380)

9-31909PR Tray category #4 (375 x 265mm)

9
PC.
kg 0.65 1/6
KT NO. Contents

T8H x 75, T9H x 75, T10H x 75,

T15Hx 75, T20H x 100,
1427
T25H x 100, T27H x 100,
T30H x 125, T40H x 150

9-90310MR Tray category #4 (375 x 265mm)

10
kg 1.08 1/6 PC.
KT NO. Contents

1411 PH1 x 100, PH2 x 100, PH3 x 150

1412 5.5 x 100, 6.5 x 100, 8.0 x 150

76220-07 9CJ2120 14324003 24110214

9-34128FR Tray category #4 (375 x 265mm)

kg 1.98 1/6
Contents
1836P PH2, PH3 14
PC.
1836S 9, 11
1880P PH2, PH3
1880S 8, 10
1930 8 x 10, 11 x13, 12 x 14
4112 414810S 3204

9-2526MR Tray category #5 (265 x 185mm)

Contents
kg 0.90 1 / 10 26
PC.
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 13
2235M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 13
2779-55G 2813
2221-02
2792
2221-04

107
 Tool Set Content
265 30 265 265 30 265
375 185 554

185

185
Tray #5 Tray #5 Tray #5

Tray #5

Tray #5

Tray #5

Tray #5

265
265

375
Tray #4

375
Tray #4 P* P*

Tray #5 Tray #5 Tray #5

Drawer (579x270)
Drawer (579x380)

9-4119PR Tray category #5 (265 x 185mm)

9
PC.
kg 1.10 1 / 10
Contents

4033 T20, T25, T27, T30, T40, T45, T50, T55, T60

9-4120PR Tray category #5 (265 x 185mm)

9
PC.
kg 1.30 1 / 10
Contents

4035 H4, H5, H6, H7, H8, H10, H12, H14, H17

9-91026PR Tray category #5 (265 x 185mm)

kg 1.3 1 / 10
Contents 26
PC.
T10, T15, T20, T25, T27, T30, T40, T45,
1143R
T50
T10H, T15H, T20H, T25H, T27H, T30H,
1147R
T40H
4023 T30, T40, T45, T50, T55
4375M E10, E12, E14, E16, E18

9-1303MR Tray category #5 (265 x 185mm)

3
PC.
kg 0.50 1 / 10
KT NO. Contents

1930 10 x 11, 12 x 14, 14 x 17

9-10112MR 9-10212MR Tray category #5 (265 x 185mm)

KT NO. Contents
kg 1.22 1 / 10 12
PC.

9-10112MR
373202R
3731M
10, 11, 12, 13, 373203R
14, 15, 16, 17, 19
9-10212MR 373204R
3732M

108
Tool Set Content
265 30 265 265 30 265
375 185 554

185

185
Tray #5 Tray #5 Tray #5

Tray #5

Tray #5

Tray #5

Tray #5

265
265

375
Tray #4

375
Tray #4 P* P*

Tray #5 Tray #5 Tray #5

Drawer (579x270)
Drawer (579x380)

9-40103GP Tray category #5 (265 x 185mm)

kg
3
Contents 0.83 1 / 10 PC.

6111-07 6211-06

6311-06

9-31106MR Tray category #5 (265 x 185mm)

6
PC.
kg 0.60 1 / 10
KT NO. Contents

1421 PH0 x 60, PH1 x 80, PH2 x 100

1422 3 x 75, 5.5 x 100, 6.5 x 150

9-4128FR Tray category #5 (265 x 185mm)

Contents
kg 1.70 1 / 10 10
PC.
1836P PH2, PH3
1836S 9, 11
1880P PH2, PH3
1880S 8, 10
4112 414810S

9-20110MR Tray category #5 (265 x 185mm)

KT NO. Contents
kg 1.10 1 / 10 10
PC.
H1.5, H2, H2.5, H3, H4, H5, H6, H8, H10
1120MR

3204 (Ø 60 ~ 140)

109
 560

Tool Set Content Tray #6

375
Drawer (579x380)

9-7576MR Tray category #6 (560 x 375mm)

kg 7.69 1/3
Contents
76
8, 10, 11, 12, 13, 14, 15, 16, 17, 19, PC.
3335M
20, 21, 22, 24
8, 10, 11, 12, 13, 14, 15, 16, 17, 19,
3235M
21, 22, 24
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
4335MR
20, 21, 22, 23, 24, 27, 30, 32
4235M 10, 12, 13, 14, 17, 19, 21, 22, 24
9TD403 12, 13, 14, 17, 19
321510M 366516
3792
321512M 366521
3452-08F 3769-08P 4311-16F
4768-10P 4452-18FR 4573-10
4251-03 3221-03
4251-05 3221-06
4251-10 3221-10

9-94435MP Tray category #6 (560 x 375mm)

kg 6.49 1/3
Contents
35
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, PC.
4435M
21, 24, 26, 29, 32
4535M 10, 12, 13, 14, 17, 19, 21, 24
4415M 17, 19, 21, 22

4797P 68SS-07 68HS-07

6011-10R 6211-06 6311-08

6463-08C 74030

9-31919MR Tray category #6 (560 x 375mm)

kg 2.67 1/5
Contents
19
1411 PH0 x 75, PH2 x 38 PC.
1412 3 x 75, 6.5 x 38
1421 PH2 x 300
1422 6.5 x 300
1481 PH2 x 100, PH3 x 150
1482 6.5 x 100, 8 x150
T8H x 75, T10H x 75, T15H x 75,
1427 T20H x 100, T25H x 100,
T27H x 100, T30H x 125
43280212 2121-18

9-90408TQ Tray category #6 (560 x 375mm)

kg 2.06 1/5
Contents
8
75102-08G 75202-08G PC.
75302-08G 75402-08G
75502-08G 79063-12

79093-05C 7911-12

110
 280 280

187
Tray #7 Tray #7

Tool Set Content

187
Tray #7 Tray #7

Drawer (579x380)

9-4057MR Tray category #7 (280 x 187mm)

27
kg 2.99 1/4 PC.
Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,

4330MR 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 32, 33, 34, 36

9-4557MR Tray category #7 (280 x 187mm)

27
kg 2.99 1/4 PC.
Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,

4335MR 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 32, 33, 34, 36

9-4138PR Tray category #7 (280 x 187mm)

18
PC.
kg 1.9 1 / 10
Contents

4033 T20, T25, T27, T30, T40, T45, T50, T55, T60
4035 H4, H5, H6, H7, H8, H10, H12, H14, H17

9-7128PR Tray category #7 (280 x 187mm)

Contents
kg 1.20 1 / 10 28
PC.
3025 H3, H4, H5, H6, H7, H8, H10, H12
3023 T15, T20, T25, T27, T30, T40, T45, T50
3375M E8, E10, E12, E14, E16, E18
4375M E10, E12, E14, E16, E18, E20

9-4427MP Tray category #7 (280 x 187mm)

27
kg 4.09 1/4 PC.
Contents

8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18,

4535M 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 32, 33, 34, 36

9-4827MP Tray category #7 (280 x 187mm)

27
kg 4.09 1/4 PC.
Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,

4530M 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 32, 33, 34, 36

111
 280 280

187
Tray #7 Tray #7

Tool Set Content

187
Tray #7 Tray #7

Drawer (579x380)

9-3602MR Tray category #7 (280 x 187mm)

12
PC.

kg 1.27 1 / 10
Contents

3350M 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

9-3612MR Tray category #7 (280 x 187mm)

12
PC.

kg 1.27 1 / 10
Contents

3351MR 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

9-30904AY Tray category #7 (280 x 187mm)

▪ Use for scribing, alignment, installing and

removing O rings, seals and washers stainless. 4
PC.
kg 0.43 1/8
Contents

43250115Y 43270115Y
43260115Y 43290115Y

560
Tray #8

Tray #8

Tray #8

375

187
Drawer (579x380)

9-12110MR Tray category #8 (375 x 187mm)

10
PC.
kg 1.89 1 / 12
Contents

3731M 8, 10, 12, 13, 14, 17, 19, 21, 22, 24

9-90114MR Tray category #8 (375 x 187mm)

kg
14
Contents 1.75 1 / 12 PC.
1930 8x10, 10x11, 12x14, 14x17, 17x19
1060 8, 10, 12, 14, 17, 19, 21, 22, 24

112
 560

Tray #8

Tray #8

Tray #8

375
Tool Set Content 187
Drawer (579x380)

9-1011GP Tray category #8 (375 x 187mm)

kg 1.15 1 / 12
Contents
11
PC.
761G 6x185mm
4x185mm, 5x185mm
763G
6x185mm, 8x185mm
2x140mm, 3x150mm, 4x180mm,
764G
5x200mm, 6x210mm, 8x220mm

9-91016MR Tray category #8 (375 x 187mm)

16
Contents
kg 1.15 1 / 12 PC.

3730M 8, 10, 12, 13, 14, 17, 19

T10, T15, T20, T25, T27, T30, T40, T45,
1123R
T50

560

Tray #10

Tray #10

375
Tray #9

140 280
Drawer (579x380)

9-4335MR 9-4235MR Tray category #9 (375 x 280mm)

25
kg
PC.
KT NO. Contents 5.01 1/2

9-4335MR 4235M 8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28,
9-4235MR 4230M 29, 30, 32, 36

9-4435MP Tray category #9 (375 x 280mm)

25
PC.

kg 7.3 1/2
Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,

4435M 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 32, 36

113
 560

Tool Set Content

Tray #10

Tray #10

375
Tray #9

140 280
Drawer (579x380)

9-6414MP 9-6414SP Tray category #9 (375 x 280mm)

14
PC.

9-6414MP 9-6414SP

Kg
KT NO. Contents - -

9-6414MP 19, 21, 22, 24, 26, 27, 29, 30, 32, 33, 35, 36, 38, 41
6435M

9-6414SP 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8
6435S

510

205
Tool Chest Set Content
Tray #11

Drawer (504 x 195 mm)

9-4338MR 9-4338MR01 9-4338MR03 Tray category #11 (510 x 205mm)

▪ For Top drawer of 87401-2 / 87401-3 / 87401-3H P.54

38
PC.
9-4338MR 9-4338MR01 / 9-4338MR03

kg 5.96 1/5
KT NO. Contents

9-4338MR PH2, PH3 4251-05R

4768-10F 4021 4251-10R
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 27, 30, 32 8, 10
4022 4572-12
9-4338MR01 4755-10G
4335MR T25, T27, T30, T40
4023 4791R
8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, H4, H5, H6, H8,
9-4338MR03 20, 21, 22, 24, 27, 30, 32 4755-10G 4025 H10, H12 463521R

114
 500

Tool Chest Set Content

190
Tray #12

▪ for 87401-2 / 87401-3 / 87401-3H P.54

Drawer (504 x 195 mm)

9-90121MR Tray category #12 (500 x 190mm)

kg 2.1 1/5
Contents 21
6 x 7, 8 x 10, 11 x 13, 12 x 13, PC.
1900
17 x 19, 22 x 24
8 x 9, 10 x 11, 12 x 13,
1970
14 x 15, 16 x 17, 18 x 19
H1.5, H2, H2.5, H3, H4, H5,
1120MR
H6, H8, H10

9-90126MR Tray category #12 (500 x 190mm)

Contents
kg 2.38 1/5 26
PC.
6, 7, 8, 9, 10, 11, 12, 13, 14,
1060
15, 16, 17, 18, 19, 20, 21, 22
H1.5, H2, H2.5, H3, H4, H5, H6,
1120MR
H8, H10

▪ for 87401-2 / 87401-3 / 87401-3H P.54

9-90104GP Tray category #12 (500 x 190mm)

Contents
kg 1.36 1/5 4
PC.
3611-08P 6511-10

6111-07 6311-06

9-31006MR Tray category #12 (500 x 190mm)

kg 0.74 1/5
Contents 6
PC.
1421 PH1 x 80, PH2 x 38, PH3 x 150

1422 6.5 x 38, 5.5 x 100, 8 x 175

9-90113MA Tray category #12 (500 x 190mm)

Contents
kg 2.98 1/5 13
PC.
4023 T45

4025 H8, H12

402B M16

3204 401408M 9AE42

9AE2-6606
112005MR 9AE2-7608
112006MR 9AE2-7614
9AE2-9315

115
 Drawer (470 x 220 mm)

Tool Box Set Content

460

105
Tray #13
▪ For 87402 only P.55

9-4219MR 9-4219MR07 9-4219SR08 Tray category #13 (460 x 105mm)

9-4319MR 9-4319MR01 9-4319MR02

9-4319MR05

9-4219MR 9-4219MR07
20
PC.

9-4219SR08 9-4319MR/9-4319MR05

9-4319MR02 9-4319MR01

kg 2.5 1/8
KT NO. Contents

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
9-4219MR 4768-10F 4330MR 24, 27, 30, 32

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
9-4219MR07
24, 25, 26, 27
4330MR
4762-10F
5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 5/8, 11/16,
9-4219SR08
3/4, 25/32, 13/16, 7/8, 15/16, 1, 1-1/16, 1-3/16, 1-1/4
4330SR

9-4319MR 4791R
4768-10F
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
9-4319MR01 4755-10G 24, 27, 30, 32
4335MR
9-4319MR02 4779-10FR
8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24,
9-4319MR05 4768-10F 27, 30, 32

9-4116FR Tray category #13 (460 x 105mm) 9-1606MR Tray category #13 (460 x 105mm)
9-4116FR03 9-1606MR01
6 6
PC. PC.

kg 2.2 1/8 kg 1.1 1/8

KT NO. Contents KT NO. Contents

10 x 12, 12 x 14, 14 x 17,

9-4116FR 4251-05R 4572-12 9-1606MR 17 x 19, 19 x 21, 23 x 26
463521R
4251-10R
1960
8 x 10, 10 x 12, 12 x 14,
9-4116FR03 4452-18FR 4223-02R
9-1606MR01 14 x 17, 17 x 19, 22 x 24
463021R

116
 Drawer (470 x 220 mm)

Tool Box Set Content

460

105
Tray #13
▪ For 87402 only P.55

9-1217MR Tray category #13 (460 x 105mm) 9-1716MR Tray category #13 (460 x 105mm)

7 6
PC. PC.

kg 1.5 1/8 kg 1.1 1/8

Contents Contents
8 x 9, 10 x 11, 12 x 13, 14 x 15,
1060 17, 18, 19, 20, 21, 22, 24 1970
16 x 17, 18 x 19

9-90115MR Tray category #13 (460 x 105mm) 9-40203GP Tray category #13 (460 x 105mm)

15 3
PC. PC.

kg 0.8 1/8
kg 1.2 1/8 Contents
Contents
6 x 7, 8 x 10, 11 x 13, 12 x 13, 6111-07 6211-06
1900
17 x 19, 22 x 24
H1.5, H2, H2.5, H3, H4, H5, H6, 6311-06
1120MR
H8, H10

9-90120MR Tray category #13 (460 x 105mm) 9-30106MR Tray category #13 (460 x 105mm)

20 6
PC. PC.

kg kg 0.8 1/8
Contents 1.5 1/8 Contents
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 1421 PH1 x 80, PH2 x 100, PH3 x 150
1060
16
H1.5, H2, H2.5, H3, H4, H5, H6, 1422 5.5 x 100, 6.5 x 150, 8 x 175
1120MR
H8, H10

9-90125MR Tray category #13 (460 x 105mm) 9-30206MR Tray category #13 (460 x 105mm)

15 6
PC. PC.

kg kg 1.18 1/8
Contents 1.2 1/8 Contents

8 x 10 , 10 x 12 , 12 x 14 , 1461 PH1 x 75, PH2 x 100, PH3 x 150

1900
14 x 17 , 17 x 19 , 22 x 24
H1.5, H2, H2.5, H3, H4, H5, H6, 1462 5.5 x 100, 6.5 x 150, 8 x 175
1120MR
H8, H10

117
 Tool Box Set Content
▪ For 87408 only P.55
Drawer (530 x 220 mm)
Drawer (530 x 220 mm) 510

520

200
Tray #15
Tray #14

93
9-4029CR Tray category #14 (520 x 93mm) 9-6010MR Tray category #15 (465 x 183mm)
29 9-6010MR01
PC.
10
Contents
kg 2.67 1/5 PC.

4025 H5, H6, H8, H10, H12, H14

8, 10, 11, 12, 13, 14, 15, 16, 17, 19,
4330MR
21, 22, 23, 24, 26, 27, 28, 30, 32
Kg
4330SR 7/16, 9/16, 7/8 KT NO. Contents

463521R 33, 36, 38, 6779-20F

9-6010MR 9.70
41, 46, 50
6251-08 1/2
6330M
6251-16
9-4156PR Tray category #14 (520 x 93mm) 9-6010MR01
30, 32, 36,
41, 46, 50
9.50
6572-20
6
PC.
9-1215MR03 Tray category #15 (465 x 183mm)
kg 1.99 1/5
Contents
15
4779-10GR 4572-12 PC.
4251-03R
4251-05R 4791R
4251-10R
kg 3.12 1/2
Contents

9-90111MR Tray category #14 (520 x 93mm)

1060
8, 10, 11, 12, 13, 14, 17, 18, 19, 21,
22, 24, 27, 30, 32

11
PC.

kg 1.25 1/5
Contents
H1.5, H2, H2.5, H3, H4, H5, H6,
1145MR
H8, H10

3611-10P 6511-10C

118
119
 HAND SOCKETS &
ACCESSORIES
▪ 1 /4" Drive
Socket, Bit Socket, Ratchet &
Accessory

▪ 3 /8" Drive
Socket, Bit Socket, Ratchet &
Accessory

▪ 1 /2" Drive
Socket, Bit Socket, Ratchet &
Accessory

▪ 3 /4" Drive
Socket, Bit Socket, Ratchet &
Accessory

▪ 1" Drive
Socket, Ratchet & Accessory

▪ Socket Set, Socket & Tool Set,

Tools Bag Set

120
121
 S ocket 1 Ho 2 La 3M 4 t re
He a t
0 t f o rge 0 t h ing 0 a rk ing 0 a t m e nt

Made
0 5 Sa nd b l a s t 0 6G rind ing 0 7P l a t ing 0 8 Ra u b b e r s t ripe
s s e m b ly

Precision forging Finest material for tools

Technology

O t h e r b ra nd ( no t go o d ) K ing T o ny b ra nd ( go o d )
E lem ent c om position %
In forging process, metal moved while it is still in the solid state.
King Tony specialized in forging technology to create better metal ●F e 9 7.1025% ●M o 0.2325% ●P 0.0125%
configuration. Non-straight grain flow and non-sharp corners can
extend lifetime and durability of socket. Torque is transmitted for ●M n 0.64 8 5% ● Si 0.2301% ●S 0.0104 %
powerful tightening under safety. ●N i 0.508 9 % ●C u 0.19 70% ●C o 0.009 2%

Conventional heat
●C r 0.5058 % ●V 0.1130% ●W 0.008 8 %
●C ● Al ●B
treatment and
0.4 000% 0.019 6% 0.0012%

microstructural
Tools are made to extend hand work. King Tony selects different
material depends on its difference of nature for tightening, power
impacting, cutting, rotating, and locking. Choose qualified material
to meet required lifetime for professional use and consumption.

Extremely hard-wearing
performance
O t h e r b ra nd : K ing T o ny b ra nd :

65%
O v e r o f T ro o s t it e ( Z n, M n) W e l l s pre a d ( F e ) e l e m e nt w il l
e l e m e nt w il l b ring w e a k po int . b ring b e t t e r s t re ngt h . E x c e e d o t h e r b ra nd s
( no t go o d ) ( go o d )

41670
Heat treatment involves the use of heating or chilling experience and
time control. King Tony controls heat treatment system to ensure the
right hardness without the brittleness. From microstructural picture you
can see elements are well- distributed. 25211
Professional production
K IN G T O N Y O t h e rs
F a t igu e t e s t ( t im e s )

& quality control

E x c e e d o t h e r b ra nd s 23%
1110
899
531
DIN 30% K IN G T O N Y O t h e rs DI N ST D.
F ra c t u re t e s t ( N m )
K I N G T O N Y h a nd s o c k e t re a c h 30% h igh e r t h a n DI N 1/ 2DR . 19 m m h a nd s o c k e t ( 4 33519 M R )
int e rna t io na l s t a nd a rd .
King Tony offers reliable tools for professional users, strictly controls
Quality control also ensure that a sufficient level of production output.
its quality to ensure achievement of required performance. From
King Tony uses advance technology to inspect tiny difference on each
“fracture & fatigue test”, you will know the difference we have when
step. Our hand socket, ratchet, extension bar, and power handle is 30%
compare to others.
higher than international DIN standards. Impact socket reach 50% higher
torque than DIN standards.

122
Standard Socket • Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

2330M 1/4" 2335M 1/4"

▪ DIN 3124, ISO 2725-1 ▪ DIN 3124, ISO 2725-1

D1

D2
D1

D2

l l
L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
233004M 4 6.8 11.8 4 24 10 20 / 600 233532M 3.2 5.7 11.8 3.5 24 9 20 / 600
233045M 4.5 7.4 11.8 5 24 10 20 / 600 233504M 4 6.8 11.8 4 24 10 20 / 600
233005M 5 8.0 11.8 6 24 11 20 / 600 233545M 4.5 7.4 11.8 5 24 10 20 / 600
233055M 5.5 8.7 11.8 6 24 11 20 / 600 233505M 5 8.0 11.8 6 24 11 20 / 600
233006M 6 9.2 11.8 7 24 11 20 / 600 233555M 5.5 8.7 11.8 6 24 11 20 / 600
233007M 7 10.3 11.8 7 24 11 20 / 600 233506M 6 9.2 11.8 7 24 11 20 / 600
233008M 8 11.4 11.8 8 24 11 20 / 600 233507M 7 10.3 11.8 7 24 11 20 / 600
233009M 9 12.8 12.0 8 24 15 20 / 600 233508M 8 11.4 11.8 8 24 11 20 / 600
233010M 10 14.3 13.0 9 24 14 12 / 360 233509M 9 12.8 12.0 8 24 15 20 / 600
233011M 11 15.8 14.2 9 24 20 12 / 360 233510M 10 14.3 13.0 9 24 14 12 / 360
233012M 12 16.8 15.5 9 24 22 12 / 360 233511M 11 15.8 14.2 9 24 20 12 / 360
233013M 13 17.8 16.5 9 24 24 12 / 360 233512M 12 16.8 15.5 9 24 22 12 / 360
233014M 14 19.6 18.5 9 24 30 10 / 300 233513M 13 17.8 16.5 9 24 24 12 / 360
233514M 14 19.6 18.5 9 24 30 10 / 300
233515M 15 20.9 19.3 12 24 40 10 / 300

2330S 1/4" 2335S 1/4"

▪ ANSI/ASME B107.1 ▪ ANSI/ASME B107.1
D1

D2
D1

D2

l l

L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
inch mm mm mm mm inch mm mm mm mm
233005S 5/32 6.8 11.8 4 24 10 20 / 600 233505S 5/32 6.8 11.8 4 24 10 20 / 600
233006S 3/16 7.9 11.8 6 24 10 20 / 600 233506S 3/16 7.9 11.8 6 24 10 20 / 600
233007S 7/32 8.7 11.8 6 24 11 20 / 600 233507S 7/32 8.7 11.8 6 24 11 20 / 600
233008S 1/4 9.5 11.8 7 24 11 20 / 600 233508S 1/4 9.5 11.8 7 24 11 20 / 600
233009S 9/32 10.3 11.8 7 24 11 20 / 600 233509S 9/32 10.3 11.8 7 24 11 20 / 600
233010S 5/16 11.4 11.8 8 24 11 20 / 600 233510S 5/16 11.4 11.8 8 24 11 20 / 600
233011S 11/32 13.7 12.2 8 24 13 20 / 600 233511S 11/32 13.7 12.2 8 24 13 20 / 600
233012S 3/8 14.2 13.0 8 24 14 12 / 360 233512S 3/8 14.2 13.0 8 24 14 12 / 360
233014S 7/16 15.8 14.2 9 24 19 12 / 360 233514S 7/16 15.8 14.2 9 24 19 12 / 360
233015S 15/32 16.8 15.5 9 24 22 12 / 360 233515S 15/32 16.8 15.5 9 24 22 12 / 360
233016S 1/2 17.6 16.5 9 24 24 12 / 360 233516S 1/2 17.6 16.5 9 24 24 12 / 360
233518S 9/16 19.6 18.5 9 24 25.2 10 / 300

123
 Deep Socket 2235S 1/4"
▪ ANSI/ASME B107.1
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

2230M 1/4"
▪ DIN 3124, ISO 2725-1

D2
D1
l
L

KT NO. D1 D2 ℓ L g

D2
D1

inch mm mm mm mm

ℓ 223505S 5/32 6.8 11.8 6 50 24 20 / 320

L 223506S 3/16 7.9 11.8 7 50 24 20 / 320
223507S 7/32 8.7 11.8 9 50 25 20 / 320
KT NO. D1 D2 ℓ L g 223508S 1/4 9.5 11.8 9 50 25 20 / 320
mm mm mm mm mm
223509S 9/32 10.3 11.8 15 50 25 20 / 320
223004M 4 6.8 11.8 6 50 20 20 / 320 223510S 5/16 11.8 11.8 15 50 24 20 / 320
223045M 4.5 7.4 11.8 7 50 21 20 / 320 223511S 11/32 13.0 13.0 15 50 31 15 / 240
223005M 5 8.0 11.8 7 50 21 20 / 320 223512S 3/8 14.5 14.5 15 50 34 15 / 240
223055M 5.5 8.7 11.8 9 50 22 20 / 320 223514S 7/16 15.8 15.8 21 50 46 15 / 240
223006M 6 9.2 11.8 9 50 22 20 / 320 223516S 1/2 17.6 17.6 21 50 56 15 / 300
223007M 7 10.3 11.8 15 50 22 20 / 320 223518S 9/16 19.6 19.6 21 50 52.2 15 / 270
223008M 8 11.8 11.8 15 50 24 20 / 320
223009M 9 13.0 13.0 15 50 30 15 / 240
223010M
223011M
10
11
14.5
15.8
14.5
15.8
15
21
50
50
38
44
15 / 240
15 / 240
Double Square Socket
223012M 12 16.8 16.8 21 50 53 15 / 240
223013M 13 17.8 17.8 21 50 51 15 / 240
223014M 14 19.8 19.8 21 50 67 15 / 240 2310M 1/4"
▪ DIN 3120
2235M 1/4"
D1

▪ DIN 3124, ISO 2725-1

D2

l
L

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
D2
D1

231008M 8 14.3 13.0 9 24 14 12 / 360

l 231010M 10 17.6 16.5 9 24 14 12 / 360
L

KT NO. D1 D2 ℓ L g
mm
mm mm mm mm mm
2310S 1/4"
223504M 4 6.8 11.8 6 50 20 20 / 320
▪ ANSI/ASME B107.1
223545M 4.5 7.4 11.8 7 50 21 20 / 320
223505M 5 8.0 11.8 7 50 21 20 / 320
223555M 5.5 8.7 11.8 9 50 21 20 / 320
D1

D2

223506M 6 9.2 11.8 9 50 23 20 / 320

223507M 7 10.3 11.8 15 50 23 20 / 320 l
223508M 8 11.8 11.8 15 50 24 20 / 320 L

223509M 9 13.0 13.0 15 50 29 15 / 240

KT NO. D1 D2 ℓ L g
223510M 10 14.5 14.5 15 50 38 15 / 240 inch mm mm mm mm
223511M 11 15.8 15.8 21 50 44 15 / 240
231010S 5/16 14.3 13.0 9 24 14 12 / 360
223512M 12 16.8 16.8 21 50 53 15 / 240
231012S 3/8 17.6 16.5 9 24 14 12 / 360
223513M 13 17.8 17.8 21 50 51 15 / 240
223514M 14 19.8 19.8 21 50 68 15 / 240
223515M 15 20.9 20.9 25 50 79 12 / 240

124
Star Socket
• Chrome vanadium steel
• Polished, chrome plated KT No. & D1

2375M 1/4" 2012X 1/4"

▪ DIN 3120 ▪ Slotted head
▪ DIN ISO 2380-1
D1

D2

l
L L

KT NO. D1 D2 ℓ L g Tip width Tip thickness L g

Size mm mm mm mm KT NO. mm mm mm
237504M E4 6.0 11.8 3.6 24 13 20 / 600 201235X 3.5 0.6 25 8 20 / 600
237505M E5 7.0 11.8 4.0 24 13 20 / 600 201255X 5.5 1 25 9 20 / 600
237506M E6 8.0 11.8 6.0 24 13 20 / 600 201208X 8 1.2 25 10 20 / 600
237507M E7 8.5 11.8 7.0 24 13 20 / 600
237508M E8 9.8 11.8 8.0 24 13 20 / 600
237510M E10 11.8 11.8 9.0 24 13 20 / 600 2015X 1/4"
▪ Hexagon head
2275M 1/4" ▪ DIN ISO 2380-1

▪ DIN 3120

l L g
KT NO. mm mm
D2
D1

201503MX H3 25 8 20 / 600
L 201504MX H4 25 9 20 / 600
201505MX H5 25 10 20 / 600
KT NO. D1 D2 ℓ L g 201506MX H6 25 10 20 / 600
Size
mm mm mm mm mm
201508MX H8 25 12 20 / 600
227504M E4 6.0 11.8 3.6 50 22 20 / 320 201510MX H10 25 12 20 / 600
227505M E5 7.0 11.8 4.0 50 22 20 / 320 201504SX 1/8 25 8 20 / 600
227506M E6 8.0 11.8 6.0 50 23 20 / 320 201506SX 3/16 25 9 20 / 600
227507M E7 8.5 11.8 7.0 50 24 20 / 320 201507SX 7/32 25 10 20 / 600
227508M E8 9.8 11.8 8.0 50 26 20 / 320 201508SX 1/4 25 10 20 / 600

Bit Socket 201510SX

201512SX
5/16
3/8
25
25
12
12
20 / 600
20 / 600
• Bit Socket made from silicon alloy steel (S2)
• Polished, chrome plated
• Mini type
2013X 1/4"
▪ For torx internal screw
In order to get normal life of bit socket,
always use within limited torque to bit.

2011X 1/4"
L

▪ Phillips head
▪ DIN ISO 8764-1 L
KT NO. g
Size mm
201308X T8 25 8 20 / 600
201309X T9 25 8 20 / 600
L
201310X T10 25 8 20 / 600
201315X T15 25 8 20 / 600
L 201320X T20 25 8 20 / 600
KT NO. g
No. mm 201325X T25 25 9 20 / 600
201101X PH1 25 9 20 / 600 201327X T27 25 9 20 / 600
201102X PH2 25 10 20 / 600 201330X T30 25 9 20 / 600
201103X PH3 25 10 20 / 600 201340X T40 25 10 20 / 600
201104X PH4 25 12 20 / 600

125
 Bit Socket
• Bit Socket made from silicon alloy steel (S2) 2035 1/4"
• Polished, chrome plated
▪ Hexagon head
In order to get normal life of bit socket, ▪ DIN 7422/3120
always use within limited torque to bit.

2018X 1/4"
L
▪ Pozidriv head
▪ DIN ISO 8764-1
L g
KT NO. mm mm
203503 H3 37 13 20 / 600
L
203504 H4 37 15 20 / 600
L g 203505 H5 37 15 20 / 600
KT NO. No. mm
203506 H6 37 15 20 / 600
201801X PZ1 25 8.5 20 / 600 203507 H7 37 16 20 / 600
201802X PZ2 25 9.5 20 / 600 203508 H8 37 17 20 / 600
201803X PZ3 25 10 20 / 600 203510 H10 37 21 20 / 600
201804X PZ4 25 12 20 / 600

2033 1/4"
Bit Socket ▪ For torx internal screw
• Bit Socket made from silicon alloy steel (S2)
▪ DIN 3120
• Polished, chrome plated

In order to get normal life of bit socket,

always use within limited torque to bit. L

2031 1/4"
L g
KT NO.
▪ Phillips head Size mm
▪ DIN ISO 8764-1 203308 T8 37 12 20 / 600
203309 T9 37 12 20 / 600
203310 T10 37 13 20 / 600
203315 T15 37 14 20 / 600
L
203320 T20 37 14 20 / 600
203325 T25 37 14 20 / 600
L g
KT NO. 203327 T27 37 14 20 / 600
No. mm
203101 PH1 37 14 20 / 600 203330 T30 37 15 20 / 600
203102 PH2 37 14 20 / 600 203340 T40 37 16 20 / 600
203103 PH3 37 15 20 / 600
203104 PH4 37 16 20 / 600 2037 1/4"
▪ For tamper resistant torx screw
▪ DIN 3120
2032 1/4"
▪ Slotted head
▪ DIN ISO 8764-1 L

L g
L KT NO. Size mm
Tip 203708 T8H 37 12 20 / 600
Tip width thickness L
KT NO. g
mm mm 203709 T9H 37 12 20 / 600
mm
203235 3.5 0.5 37 14 20 / 600 203710 T10H 37 13 20 / 600
203204 4 0.8 37 14 20 / 600 203715 T15H 37 14 20 / 600
203255 5.5 1.0 37 15 20 / 600 203720 T20H 37 14 20 / 600
203265 6.5 1.2 37 15 20 / 600 203725 T25H 37 14 20 / 600
203207 7 1.2 37 15 20 / 600 203727 T27H 37 14 20 / 600
203208 8 1.2 37 16 20 / 600 203730 T30H 37 15 20 / 600
203210 10 1.6 37 17 20 / 600 203740 T40H 37 16 20 / 600

126
Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

2725 FINE
GEAR 1/4"
▪ Reversible ratchet
▪ 8° gear action degree (45 teeth)

Overall length g
KT NO. inch mm 2725-55G
2725-55F 5-1/2 140 144 5 / 90
2725-55G 5-1/2 140 171 5 / 90
2725DK
2725DK renewal kits - - 2725-55F

2755 FINE
GEAR 1/4"
▪ Reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN3122
Overall length g
KT NO. inch mm
2755-55G 5-1/2 140 109 5 / 90
2755DK renewal kits - - 2755DK

2756 FINE
GEAR 1/4"
▪ Quick release reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN3122
Overall length g
KT NO. inch mm
2756-55G 5-1/2 140 120 5 / 90
2756DK renewal kits - - 2756DK

quick release

2752 FINE
GEAR 1/4"
▪ Quick release flexible and reversible
ratchet
▪ 5° gear action degree (72 teeth)
▪ Multi-angle design for difficult-to-
reach fasteners

Overall length g
KT NO. inch mm 2752-06G
quick release
2752-06G 6 150 127 6 / 108
2752DK renewal kits - -
2752DK

2752-45G FINE
GEAR 1/4"
▪ Swivel head ratchet
▪ Quick release flexible and reversible ratchet
▪ 5° gear action degree(72 teeth)
▪ Application: T-handle ratchet / screwdriver
ratchet

Overall length
KT NO. g
inch mm
2752-45G 4-1/2 114 123 6 / 108

127
 Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

2761 1/4"
▪ Quick release reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. inch mm 2761-55F
2761-55F 5-1/2 140 169 6 / 108
2761-55P 5-1/2 140 158 6 / 108
2761DK renewal kits - - 2761-55P
2761DK

2769 1/4"
▪ Reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. 2769-55F
inch mm
2769-55F 5-1/2 140 126 6 / 108
2769-55P 5-1/2 140 125 6 / 108
2769DK 2769-55P
2769DK renewal kits - -

2771 1/4"
▪ Quick release reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. 2771-55F
inch mm
2771-55F 5-1/8 130 140 6 / 108
2771-55G 5-1/8 130 111 6 / 108
2771DK renewal kits - - 2771DK
2771-55G

2779 1/4"
▪ Reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g 2779-55F
KT NO. inch mm
2779-55F 5-1/8 130 146 6 / 108
2779-55G 5-1/8 130 114 6 / 108
2779DK
2779DK renewal kits - - 2779-55G

2781 1/4"
▪ Quick release flexible and reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. 2781-06F
inch mm
2781-06F 6 150 155 6 / 108
2781-06P 6 150 148 6 / 108
2781DK renewal kits - - 2781DK 2781-06P

128
Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

2789 1/4" 1/4"

▪ Flexible and reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g 2789-06F
KT NO. inch mm
2789-06F 6 150 140 6 / 108
2789-06P 6 150 140 6 / 108
2789DK 2789-06P
2789DK renewal kits - -

2760 1/4"
MINI
RATCHET 1/4"
▪ Mini reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. inch mm
2760-04 4 100 73 8 / 128
2760-04
2760DK renewal kits - - 2760DK

2765 276A FINE

GEAR
MINI
RATCHET 1/4"
▪ Mini bit holder ratchet
▪ 5° gear action degree (72 teeth)
▪ Two teeth pawl action

D H 2765DK 2765-04G

276ADK 276A-04G
A

A D L H g
KT NO. mm mm mm mm

2765-04G 18.5 26 111 20 100 6 / 108

276A-04G 23 26 111 20 99 6 / 108
2765DK renewal kits
magnet magnet
276ADK renewal kits
2765-04G (top, side, back) 276A-04G (top, side, back)

129
 Mini Ratchet Set
1001MR 1/4"
▪ Mini ratchet set
▪ 5° gear action degree (72 teeth)
10
▪ Two teeth pawl action PC.
Contents Kg
0.19 6 / 36

1025P PH1, PH2

1025T T10, T15, T20

1025H H3, H4, H5, H6

2765-04G

2501MR 1/4"
▪ 5° gear action degree (72 teeth)
▪ Two teeth pawl action 21
PC.
Kg
Contents 0.36 4 / 48

2335M 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

1025P PH1, PH2, PH3

1025T T10, T20, T30

1025H H4, H6

1025S 5.5x1.0, 6.5x1.2

276A-04G

2515MR 1/4"
▪ Mini ratchet set
▪ 5° gear action degree (72 teeth)
▪ Two teeth pawl action 15
PC.

Contents Kg
0.26 6 / 36
2335M 5, 5.5, 6, 7, 8

1025P PH1, PH2

1025T T10, T15, T20

1/4"
1025H H3, H4, H5, H6

276A-04G

130
Accessory
2745 1/4"
▪ Palm ratchet bit holder
▪ Non-toothed palm ratchet is designed for any
angle of degree
Ø1
▪ 3 position of forward / lock / reverse
▪ Suitable for narrow space where a standard
wrench cannot attain
▪ Anodized aluminum alloy body & chrome H

vanadium alloy steel bit holder

Ø1 g
KT NO. H
mm
2745 46 26.5 103 12 / 144

Accessory
• Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated KT No. & D1

2221 1/4"
▪ Extension bar
▪ DIN 3122
Overall length
KT NO. g
inch mm
2221-02 2 55 24 30 / 480
2221-03 3 75 37 20 / 400
2221-04 4 100 45 15 / 240
2221-06 6 150 67 15 / 300
2221-10 10 254 108 15 / 240
2221-12 12 305 130 15 / 240

2223 1/4"
▪ Offset extension bar
In order to get normal life of bit socket,
▪ Max. torque:35 Nm Always use within limited torque to bit.
▪ DIN 3123
Overall length g
KT NO.
inch mm

2223-02 2 55 23 30 / 480
2223-04 4 100 45 15 / 240

2293 1/4"
▪ Munti-function extension bar and offset
extension bar
▪ Hex key is applicable to the hex shank
▪ Max. torque:35 Nm
▪ DIN 3123
1.offset extension bar
or
Overall length g
KT NO.
inch mm

2293-02 2 55 25 30 / 480 2.extension bar

2293-03 3 75 35 20 / 400
2293-04 4 100 45 15 / 240
2293-06 6 150 140 15 / 300

131
 Accessory
• Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated

2311 1/4" 2178AE 2178DF 1/4"

▪ Flexible extension bar ▪ Spinner handle
▪ DIN 3122
KT No. & D1
KT No. & D1

2178AE (Polycarbonates)

Overall length g
KT NO.
inch mm
2311-06 6 150 68 12 / 384
2178DF (PP + TPR)
2311-12 12 300 92 12 / 120
Overall length g
2311-18 18 450 120 20 / 200 KT NO.
inch mm

2312 1/4" 2178AE

2178DF
6
6
150
150
76
75
6 / 120
6 / 120
▪ Flexible extension bar
KT No. & D1

2178TG 1/4"
Overall length g ▪ Spinner handle
KT NO. inch mm
▪ DIN 3122
2312-06 6 150 59 12 / 240
KT No. & D1
2792 1/4"
▪ Universal joint
▪ DIN 3123 KT NO. g
mm mm
KT No. & D1
2178TG 1/4 115 154 100 6 / 96

Overall length g
KT NO.
inch mm
2452 1/4"
2792 1 - 1/2 36 29 24 / 384
▪ Flexible handle
2813 1/4" ▪ Action degree -180°
▪ DIN 3122 KT No. & D1
▪ Adapter
▪ Convert to 3/8" drive KT No. & D1
▪ DIN 3123

2452DK
Overall length
3/8" drive (M) 1/4" drive (F) KT NO. g
inch mm
KT NO. Spec. g
2452-05F 5 130 88 15 / 270
2813 1/4" F x 3/8"M 20 12 / 360 2452DK renewal kits - -

213312DF 1/4"
▪ Screwdriver driver 2453 1/4"
▪ DIN 3126
▪ Flexible handle
▪ Action degree -180°
KT No. & D1
KT No. & D1
▪ New pattern design added in
KT NO.
Overall length g firm and powerful elements
inch mm
▪ New forge technologies I-Beam
213312DF 12 300 132 2 / 40 shank offer 15% lightweight
▪ DIN 3122 2452DK

2177DF 1/4"
▪ Spinner handle
▪ DIN 3122 Overall length
KT NO. g
KT No. & D1 inch mm
2453-05F 5 130 67 15 / 270

Overall length g
KT NO.
inch mm

2177DF 12-1/4 310 126 6 / 60

132
Accessory
• Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated & black
2127PR 1/4"
phosphate sunk ▪ Socket rail 130mmL

2571 1/4" 7
PC.
▪ Sliding T-handle
▪ DIN 3122
KT No. & D1

Overall length
KT NO. g kg
inch mm Contents 0.15 50
2571-45 4-1/2 115 41 12 / 192
2035 H3, H4, H5, H6, H7, H8, H10

8720507
2141 2142 1/4"
▪ Bit holder
▪ DIN 3122 2109PR 1/4"
KT No. & D1
▪ Socket rail 150mmL
METAL
SPRING 9
2141 PC.

MAGNET

2142
Size Overall length kg
KT NO. g Contents 0.12 50
inch mm
2141 1/4 25 14 20 / 320 2033
T8, T9, T10, T15, T20, T25, T27,
T30, T40
2142 1/4 25 14.2 20 / 320
8720609

Socket Rail Set 2107PR 1/4"

2509MR 1/4" ▪ Socket rail 130mmL

▪ Socket rail 150mmL 7

9 PC.
PC.

kg
Contents 0.12 50
kg
Contents 0.17 50
T10H, T15H, T20H, T25H, T27H,
2037
T30H, T40H
2335M 4, 5, 6, 7, 8, 9, 10, 11, 13
8720507
8720609

2119PR 1/4"
2509SR 1/4" ▪ Socket rail 150mmL
▪ Socket rail 150mmL
9 9
PC.
PC.

kg
kg
Contents 0.12 50
Contents 0.17 50
T8H, T9H, T10H, T15H, T20H,
2037
5/32, 3/16, 1/4, 9/32, 5/16, T25H, T27H, T30H, T40H
2335S
11/32, 3/8, 7/16, 1/2
8720609
8720609

133
 Socket Rail
872 1/4"
▪ Rail length from 160 mm to 560 mm
Customer Selected
L
KT NO. (mm)
870406 160
870208 200
870422 560
8720 -

Extension Bar Set

2104PR 1/4"

4
PC.

kg 0.17 1 / 80
Contents

2221 2", 3", 4", 6"

2113PR 1/4"
▪ Extension bar
▪ DIN 3122 3
PC.

kg 0.21 35
Contents

2221 3", 6", 10"

Socket Set
2510SR 1/4" 2511MR 1/4"
Metal case size (mm): Metal case size (mm):
223 x 65 x 32 (0.016 cuft) 10 223 x 65 x 32 (0.016 cuft) 11
PC. PC.

Kg Kg
Contents 0.62 1 / 30 Contents 0.67 1 / 30
5/32, 3/16, 7/32, 1/4, 9/32,
2235S 2235M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13
5/16, 11/32, 3/8, 7/16, 1/2

134
Socket Set
2516MR 2516SR 1/4"
Metal case size (mm): 2516MR 2516SR
244 x 118 x 37 (0.038 cuft)
16
PC.

Kg
KT NO. Contents 1.10 1 / 18

2516MR 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 13 2779-55G 2221-04 2178AE

2335M

2571-45 2792
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
2516SR
11/32, 3/8, 7/16, 15/32, 1/2
2335S

2518MR 2518SR 2518MR01 1/4"

Metal case size (mm): 2518MR/2518MR01 2518SR
198x105x32 (0.023cuft)

18
PC.

Kg 0.96 1 / 20
KT NO. Contents

4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12

2335M 2452-05F 2571-45
2518MR
8, 10
2310M
2725-55F
2792
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
2335S 11/32, 3/8, 7/16, 1/2
2518SR
5/16, 3/8 2221-02
2310S 2221-04

2518MR01 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

2335M

135
 Socket Set
2019MR 2019SR 2519MR 2519SR 1/4"
2019MR/2519MR 2019SR/2519SR
Metal case size (mm):
198 x 105 x 32 (0.023 cuft)
18
PC.

Kg 0.92 1 / 20
KT NO. Contents

2019MR
2330M
4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12 2769-55P 2452-05F
2310M
2519MR 8, 10
2335M 2221-02 2571-45
2221-04
2019SR
2330S 5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
11/32, 3/8, 7/16, 1/2 2310S 2792
2519SR 5/16, 3/8
2335S

2021MR 2521MR 1/4"

Metal case size (mm):
198 x 105 x 32 (0.023 cuft)
19
PC.

Kg 0.87 1 / 20
KT NO. Contents

2021MR 2221-02
2330M 2779-55G 2571-45
2221-04
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

2521MR 2452-05F 2792 2141

2335M

136
Socket Set
2025MRE01 1/4" 2525MRE 1/4"
Blow case size (mm) : Blow case size (mm) :
203 x 93 x 43( 0.028cuft) 203 x 93 x 43( 0.028cuft)
26 25
PC. PC.

Kg 0.6 1 / 20
Contents Kg 0.56 1 / 20
Contents
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 12, 13,
2330M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
14 2335M
12, 13
1025P PH1, PH2
1025P PH2 x 2
1025H H3, H4, H5
1025H H5,H6
1025T T10, T15, T20, T25, T30, T40
1025T T10 , T15 , T20 , T25 , T30 , T40
2221-04 276A-04G 2792
2771-55G 2221-04 2142

2526MR 2526SR 1/4"

Metal case size (mm):
244 x 118 x 37 (0.038 cuft) 2526MR 2526SR

26
PC.

Kg 1.30 1 / 18
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 13

2335M 2221-02
2526MR 2779-55G
2221-04
4, 5, 5.5, 6, 7, 8, 9, 10, 11, 13
2235M
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 2792 2813
2335S 15/32, 1/2
2526SR
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16,
2235S 1/2

137
 Socket Set
2526CR 1/4"
Metal case size (mm):
280 x 130 x 41 (0.053 cuft) 26
PC.

Kg 1.30 1 / 10
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2335M 2779-55G 2452-05F

2526CR 1/4, 3/8, 1/2 2571-45

2335S 2221-02
2221-04
T20, T25, T30, T40 2792
2033

2030CR 2530CR 1/4"

Metal case size (mm):
244 x 118 x 37 (0.038 cuft)
30
PC.

Kg 1.30 1 / 18
KT NO. Contents

4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12

2330M 8, 10
2030CR 2769-55F 2452-05F
2310M
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
2330S 11/32, 3/8, 7/16, 1/2
5/16, 3/8 2221-02 2792
4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12 2310S 2221-04
2335M
2530CR
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 2571-45
2335S 11/32, 3/8, 7/16, 1/2

138
Socket Set
2031MR 2531MR 1/4"
Metal case size (mm):
280 x 130 x 41 (0.053 cuft)

31
PC.

Kg
KT NO. Contents 1.60 1 / 15

2031MR T8, T9, T10, T15, 2779-55G 2221-03

2330M 4, 4.5, 5, 6, 7, 8, 9, 10, 2033 T20, T25, T27, T30 2221-06
11, 12, 13 H3, H4, H5, H6, 2178AE
2531MR 2035 H8, H10 2792
2335M 2571-45

2539MR 1/4" 2540MR 1/4"

Metal case size (mm): Metal case size (mm):
280 x 130 x 41 (0.053 cuft) 316 x 104 x 40 (0.047 cuft)

39 39
PC. PC.

Kg 1.36 1 / 12
Contents
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
2335M
Kg 1.52 1 / 15 13
Contents
1025S 4, 5.5, 7
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
2335M
12, 13
1025P PH0, PH1, PH2, PH3
2375 E4, E5, E6, E7, E8

T8, T9, T10, T15, T20, T25, T27,

1025H H3, H4, H5, H6, H7, H8
2033
T30, T40
1025T T10, T15, T20, T25, T30, T40
2035 H3, H4, H5, H6, H7, H8, H10
2792
2779-55G 213312DF
2779-55G 2178AE 2141
2221-02
2221-02 2571-45 2452-05F
2571-45 2792 2221-06
2221-04

139
 Socket Set
2044SRV 2544SRV EVA Tray #10 1/4"
Plastic case size (mm) :
389 x 185 x 66 (0.168 Cuft) 2044SRV 2544SRV
44
PC.

kg 1.62 1 / 10
KT NO. Contents

5/32, 3/16, 7/32, 1/4, 9/32, 2142

2044SRV 2235S 5/16, 11/32, 3/8, 7/16, 1/2 2792
2330S 5/32, 3/16, 7/32, 2223-02
3, 4.5, 5, 6.5, 8
1/4, 9/32, 5/16, 1025S 2223-04
11/32, 3/8, 7/16,
15/32, 1/2 PH0, PH1, PH2, PH3 2752-06G
1025P
2544SRV
H3/64, H1/16, H5/64, H3/32, 2178DF
2335S 5025H H7/64, H1/8, H9/64, H5/32

2048MRV 2548MRV EVA Tray #10 1/4"

Plastic case size (mm) :
389 x 185 x 66 (0.168 Cuft) 2048MRV 2548MRV
48
PC.

kg 1.79 1 / 10
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 2142

2048MRV 2235M 9, 10, 11, 12, 13, 14 2792
2330M 3, 4.5, 5, 6.5, 8 2223-02
4, 4.5, 5, 5.5, 6, 7, 8, 1025S
9, 10, 11, 12, 13, 14 2223-04
PH0, PH1, PH2, PH3 2178DF
1025P
2548MRV
H3, H4, H5, H6, H7,
2335M 2752-06G
1025H H8, H10

140
Socket Set
2550MRV EVA Tray #8 1/4"
Plastic case size (mm) :
389 x 230 x 66 (0.208 Cuft)
Contents
kg 2.2 1/6 50
PC.
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2375M 4, 5, 6, 7, 8

2031 PH1, PH2, PH3, PH4

2032 4, 5.5, 6.5, 8, 10

2033 T8, T9, T10, T15, T20, T25, T27, T30, T40

2035 H3, H4, H5, H6, H7, H8, H10

2771-55G 2178DF
2792 2571-45
2293-04
2221-02
2293-06

2553MRV EVA Tray #10 1/4"

Plastic case size (mm) :
389 x 185 x 66 (0.168 Cuft)
Contents
kg 1.67 1 / 10 53
PC.
2335M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

1025H H3, H4, H5, H6, H7, H8, H10

1025S 3, 4.5, 5, 6.5, 8
1025P PH0, PH1, PH2, PH3
1025U T10H, T15H, T20H, T25H, T27H, T30H, T40H
1025Z PZ1, PZ2, PZ3
1025T T10, T15, T20, T25, T27, T30, T40
7702-25 2792 2813
276A-04G 213312DF
2223-02
2745
2223-04

2565MRV 1/4"
Plastic case size (mm):
289 x 230 x 66 (0.154 cuft) 65
Contents
Kg 2.67 1/6 PC.

2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2235M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2375M E4, E5, E6, E7, E8
2013X T8, T9, T10, T15, T20, T25, T27, T30, T40
2015X 3, 4, 5, 6, 8
2018X PZ1, PZ2
2011X PH1, PH2
2012X 3.5, 5.5, 8
1025T T6, T7
1025M M4, M5, M6, M8, M10
2221-02
2792 2813 276A-04G 2221-04
2221-06

141
 Socket Set
2551MR 2551MR01 1/4"
Metal case size (mm): 2551MR 2551MR01
244 x 118 x 37 (0.038 cuft) 51
PC.

Kg
KT NO. Contents 1.30 1 / 18

4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2335M

3, 4, 5, 6 2178DF
2551MR 1025S
2755-55G
PH1, PH2 x 2, PH3 2223-02
1025P
7702-25 2223-04
H3, H4, H5, H6
1025H

T10H, T15H, T20H, T25H, T27H, T30H, T40H

1025U 753-63
2813
2551MR01
PZ1, PZ2 x 2, PZ3 2761-55F
1025Z

T10, T15, T20, T25, T27, T30, T40 2792

2142
1025T

2575MR 1/4"
Metal case size (mm):
244 x 118 x 37 (0.038 cuft) 45
PC.
Kg 1.24 1 / 18
Contents

2335M 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

1025S 4, 6.5, 7, 8

1025P PH1, PH2, PH3

1025H H2.5, H3, H4, H5, H6, H7, H8, H10

T8H, T9H, T10H, T15H, T20H, T25H,
1025U
T27H,T30H, T40H
1025Z PZ1, PZ2, PZ3

2755-55G 2223-02 2792

2311-06 2178AE 2142

142
Standard Socket
• Chrome vanadium alloy steel,
• Polished, chrome plated
• 4 ball retaining grooves KT No. & D1

3330M 3/8 " 3335M 3/8 "

▪ DIN 3124, ISO 2725-1 ▪ DIN 3124, ISO 2725-1

D1

D2
D1

D2

l l

L L

D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
KT NO. mm mm mm mm mm
mm mm mm mm mm
333006M 6 9.9 17.8 7.0 27 24 12 / 360 333506M 6 9.9 17.8 7.0 27 25 12 / 360
333007M 7 10.8 17.8 7.0 27 24 12 / 360 333507M 7 10.8 17.8 7.0 27 24 12 / 360
333008M 8 12.0 17.8 7.0 27 25 12 / 360 333508M 8 12.0 17.8 7.0 27 25 12 / 360
333009M 9 13.2 17.8 7.0 27 25 12 / 360 333509M 9 13.2 17.8 7.0 27 25 12 / 360
333010M 10 14.5 17.8 9.0 27 26 12 / 360 333510M 10 14.5 17.8 9.0 27 27 12 / 360
333011M 11 15.8 17.8 9.0 27 27 12 / 360 333511M 11 15.8 17.8 9.0 27 28 12 / 360
333012M 12 16.8 17.8 9.0 27 27 12 / 360 333512M 12 16.8 17.8 9.0 27 28 12 / 360
333013M 13 17.8 16.8 9.0 27 30 12 / 360 333513M 13 17.8 16.8 9.0 27 31 12 / 360
333014M 14 19.7 18.0 11.0 29 33 10 / 300 333514M 14 19.7 18.0 11.0 29 34 10 / 300
333015M 15 20.8 18.0 11.0 29 40 10 / 300 333515M 15 20.8 18.0 11.0 29 47 10 / 300
333016M 16 21.8 20.0 11.0 29 39 10 / 300 333516M 16 21.8 20.0 11.0 29 45 10 / 300
333017M 17 23.8 20.0 11.0 29 52 10 / 200 333517M 17 23.8 20.0 11.0 29 53 10 / 200
333018M 18 24.7 21.0 13.0 29 58 10 / 200 333518M 18 24.7 21.0 13.0 29 58 10 / 200
333019M 19 25.8 21.0 13.0 29 62 10 / 200 333519M 19 25.8 21.0 13.0 29 64 10 / 200
333020M 20 27.1 25.0 13.0 32 73 10 / 160 333520M 20 27.1 25.0 13.0 32 73 10 / 160
333021M 21 27.8 25.0 13.0 32 82 10 / 160 333521M 21 27.8 25.0 13.0 32 82 10 / 160
333022M 22 29.7 26.0 15.0 32 87 10 / 160 333522M 22 29.7 26.0 15.0 32 87 10 / 160
333023M 23 29.7 26.0 15.0 32 80 10 / 160 333523M 23 29.7 26.0 15.0 32 80 10 / 160
333024M 24 31.8 26.0 17.0 32 78 8 / 160 333524M 24 31.8 26.0 17.0 32 78 8 / 160

3330S 3/8 " 3335S 3/8 "

▪ ANSI/ASME B107.1
▪ ANSI/ASME B107.1
D1

D2
D1

D2

l
l
L
L

D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
KT NO. inch mm mm mm mm
inch mm mm mm mm
333008S 1/4 10.0 17.8 7.0 27 25 12 / 360 333508S 1/4 10.0 17.8 7.0 27 25 12 / 360
333010S 5/16 12.0 17.8 7.0 27 22 12 / 360 333510S 5/16 12.0 17.8 7.0 27 22 12 / 360
333011S 11/32 13.2 17.8 7.0 27 25 12 / 360 333511S 11/32 13.2 17.8 7.0 27 25 12 / 360
333012S 3/8 14.0 17.8 9.0 27 26 12 / 360 333512S 3/8 14.0 17.8 9.0 27 26 12 / 360
333014S 7/16 15.8 17.8 9.0 27 27 12 / 360 333514S 7/16 15.8 17.8 9.0 27 27 12 / 360
333015S 15/32 16.8 17.8 9.0 27 25 12 / 360 333515S 15/32 16.8 17.8 9.0 27 25 12 / 360
333016S 1/2 17.8 16.8 9.0 27 30 12 / 360 333516S 1/2 17.8 16.8 9.0 27 30 12 / 360
333018S 9/16 19.7 18.0 11.0 29 33 10 / 300 333518S 9/16 19.7 18.0 11.0 29 33 10 / 300
333019S 19/32 20.8 18.0 11.0 29 41 10 / 300 333519S 19/32 20.8 18.0 11.0 29 41 10 / 300
333020S 5/8 21.8 20.0 11.0 29 43 10 / 300 333520S 5/8 21.8 20.0 11.0 29 43 10 / 300
333022S 11/16 23.8 20.0 11.0 29 52 10 / 200 333522S 11/16 23.8 20.0 11.0 29 52 10 / 200
333024S 3/4 25.8 21.0 13.0 29 62 10 / 200 333524S 3/4 25.7 21.0 13.0 29 62 10 / 200
333026S 13/16 27.8 25.0 13.0 32 77 10 / 160 333526S 13/16 27.8 25.0 13.0 32 77 10 / 160
333028S 7/8 29.7 26.0 15.0 32 87 10 / 160 333528S 7/8 29.6 26.0 15.0 32 87 10 / 160
333030S 15/16 31.8 26.0 17.0 34 83.7 8 / 160 333530S 15/16 31.8 26.0 17.0 34 80 8 / 160
333032S 1 33.8 26.0 17.0 34 100 8 / 160 333532S 1 33.8 26.0 17.0 34 100 8 / 160

143
 Deep Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves KT No. & D1

3230M 3/8 " 3235M 3/8 "

▪ DIN 3124, ISO 2725-1 ▪ DIN 3124, ISO 2725-1

D1

D2
D1

D2

l
l L
L

KT NO. D1 D2 ℓ L g

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
mm mm) (mm) (mm) (mm) 323507M 7 10.8 17.8 10.0 63 52 20 / 320
323007M 7 10.8 17.8 10.0 63 54 20 / 320 323508M 8 12.0 17.8 12.0 63 52 18 / 288
323008M 8 12.0 17.8 12.0 63 54 18 / 288 323509M 9 13.2 17.8 12.0 63 56 18 / 288
323009M 9 13.2 17.8 12.0 63 59 18 / 288 323510M 10 14.5 17.8 12.0 63 60 15 / 240
323010M 10 14.5 17.8 12.0 63 56 15 / 240 323511M 11 15.8 17.8 15.0 63 68 15 / 240
323011M 11 15.8 17.8 15.0 63 63 15 / 240 323512M 12 16.8 17.8 15.0 63 68 15 / 240
323012M 12 16.8 17.8 15.0 63 58 15 / 240 323513M 13 17.8 16.8 15.0 63 64 15 / 240
323013M 13 17.8 16.8 15.0 63 61 15 / 240 323514M 14 19.7 18.0 16.0 63 72 12 / 192
323014M 14 19.7 18.0 16.0 63 71 12 / 192 323515M 15 20.8 18.0 18.0 63 88 10 / 160
323015M 15 20.8 18.0 18.0 63 92 10 / 160 323516M 16 21.8 19.0 18.0 63 88 8 / 128
323016M 16 21.8 20.0 18.0 63 88 8 / 128 323517M 17 23.8 20.0 18.0 63 112 8 / 128
323017M 17 23.8 20.0 18.0 63 97 8 / 128 323518M 18 24.7 21.0 20.0 63 126 6 / 96
323018M 18 24.7 21.0 20.0 63 136 6 / 96 323519M 19 25.8 21.0 20.0 63 124 6 / 96
323019M 19 25.8 21.0 20.0 63 110 6 / 96 323521M 21 27.8 25.0 20.0 63 126 6 / 96
323021M 21 27.8 25.0 20.0 63 127 6 / 96 323522M 22 29.7 26.0 20.0 63 128 6 / 96
323022M 22 29.7 26.0 20.0 63 164 6 / 96 323524M 24 31.8 26.0 25.0 63 155 6 / 120
323024M 24 31.8 26.0 25.0 63 182 6 / 120

3235S 3/8 "

3230S 3/8 "
▪ ANSI/ASME B107.1
▪ ANSI/ASME B107.1
D1

D2
D1

D2

l
L
l
L

KT NO. D1 D2 ℓ L g
inch mm mm mm mm

KT NO. D1 D2 ℓ L g 323508S 1/4 10.0 16.8 10.0 63 50 20 /320

inch mm mm mm mm 323510S 5/16 12.0 17.8 12.0 63 52 18 / 288
323008S 1/4 10.0 16.8 10.0 63 50 20 / 320 323512S 3/8 14.0 17.8 12.0 63 60 15 / 240
323010S 5/16 12.0 17.8 12.0 63 52 18 / 288 323514S 7/16 15.8 17.8 15.0 63 68 15 / 240
323012S 3/8 14.0 17.8 12.0 63 60 15 / 240 323516S 1/2 17.8 16.8 15.0 63 68 15 / 240
323014S 7/16 15.8 17.8 15.0 63 68 15 / 240 323518S 9/16 19.7 18.0 16.0 63 72 12 / 192
323016S 1/2 17.8 16.8 15.0 63 68 15 / 240 323520S 5/8 21.8 20.0 18.0 63 88 8 / 128
323018S 9/16 19.7 18.0 16.0 63 72 12 / 192 323522S 11/16 23.8 20.0 18.0 63 112 8 / 128
323020S 5/8 21.8 20.0 18.0 63 88 8 / 128 323524S 3/4 25.8 21.0 20.0 63 126 6 / 96
323022S 11/16 23.8 20.0 18.0 63 112 8 / 128 323526S 13/16 27.8 25.0 20.0 63 126 6 / 96
323024S 3/4 25.8 21.0 20.0 63 126 6 / 96 323528S 7/8 29.7 26.0 21 63 128 6 / 96
323026S 13/16 27.8 25.0 20.0 63 126 6 / 96 323530S 15/16 31.8 26.0 22 63 159 5 / 80
323028S 7/8 29.7 26.0 21.0 63 128 6 / 96 323532S 1 33.8 26.0 22 63 277 5 / 80
323030S 15/16 31.8 26.0 22.0 63 159 5 / 80
323032S 1 33.8 26.0 22.0 63 277 5 / 80

144
Star Socket Thin Wall Deep Socket
• Chrome vanadium alloy steel
KT No. & D1
• Polished, chrome plated
3375M 3/8 " • 4 ball retaining grooves
KT No. & D1
▪ Chrome vanadium steel
▪ Polished, chrome plated
D
▪ DIN 3120

3215M 3/8 "

D1

D2

▪ Specifically for heat plug, glow plug

l
L

D1 D2 ℓ L

D2
D1
KT NO. g
Size mm mm mm mm
337504M E4 6.0 16.8 3.6 28 18 12 / 360 l
337505M E5 7.0 16.8 4.0 28 19 12 / 360 L
337506M E6 8.0 16.8 5.0 28 20 12 / 360
337507M E7 8.9 16.8 6.0 28 21 12 / 360 Thin walled design (D1)
337508M E8 10.0 16.8 6.5 28 21 12 / 360
337510M E10 12.0 16.8 7.0 28 22 12 / 360
KT NO. D1 D2 ℓ L g
337511M E11 12.8 16.8 8.0 28 23 12 / 360 mm mm mm mm mm
337512M E12 14.3 16.8 9.0 28 25 12 / 360 321510M 10 13.0 17.8 12.0 65 65 20 / 240
337514M E14 15.9 17.8 9.5 28 29 12 / 360 321512M 12 15.0 17.8 15.0 65 57 20 / 240
337516M E16 18.0 19.8 10.5 28 39 10 / 300
337518M E18 20.0 21.8 11.0 28 50 10 / 300

3275M 3/8 "

▪ Chrome vanadium steel
▪ Polished, chrome plated
▪ DIN 3120
D1

D2

l
L

KT NO. D1 D2 ℓ L g
Size mm mm mm mm
327504M E4 6.0 16.8 3.6 63 46 20 / 400
327505M E5 7.0 16.8 4.0 63 48 20 / 400
327506M E6 8.0 16.8 5.0 63 49 20 / 400
327507M E7 8.9 16.8 6.0 63 51 20 / 320
327508M E8 10.0 16.8 6.5 63 53 20 / 320
327510M E10 12.0 16.8 7.0 63 57 18 / 288
327511M E11 12.8 16.8 8.0 63 59 18 / 288
327512M E12 14.3 16.8 9.0 63 62 18 / 288
327514M E14 15.9 16.8 9.5 63 68 15 / 240
327516M E16 17.8 17.8 10.5 63 85 15 / 240
327518M E18 19.8 19.8 11.0 63 90 10 / 160

145
 Spark Plug Socket
KT No. & D1

3630 3660 3635 3665 3/8"

3670 3675 3/8"
▪ 6 / 12 points
▪ Size combined- 16.0mm (5/8") -
20.8mm (13/16")
▪ Inside sleeve - rubber / magnet 366016
363016
▪ DIN 3120
Size D L
KT NO. Type g
inch mm mm mm
12 points
363016 5/8 16.0 21 70 100 10 / 200
Rubber 363021 366021
12 points
366016 5/8 16.0 21 70 105 10 / 200
Magnet
12 points
363021 13/16 20.8 27.7 70 150 12 / 120
Rubber
363516 366516
12 points
366021 13/16 20.8 27.7 70 155 12 / 120
Magnet
6 points
363516 5/8 16.0 21 70 100 10 / 200
Rubber
6 points
366516 5/8 16.0 21 70 105 10 / 200 363521 366521
Magnet
6 points Rubber Magnet
363521 13/16 20.8 27.7 70 145 12 / 120
Rubber
6 points
366521 13/16 20.8 27.7 70 150 12 / 120
D

D
Magnet
12 points
367014 - 14.0 18.5 63 65 10 / 200 L L
Metal clip
12 points
367016 5/8 16.0 21.0 70 100 10 / 200
Metal clip
12 points
367018 - 18.0 23.8 63 97 12 / 120
Metal clip
12 points
367021 13/16 20.8 27.7 70 178 12 / 120 367514
Metal clip
6 points
367514 - 14.0 18.5 63 69 10 / 200
Metal clip
6 points
367516 5/8 16.0 21.0 70 100 10 / 200 367014
Metal clip
6 points
367518 - 18.0 23.8 63 97 12 / 120
Metal clip
6 points
367521 13/16 20.8 27.7 70 180 12 / 120
D

Metal clip
L

Metal clip

36A0 36A5 3/8"

▪ 6 / 12 points
▪ Size combined - 14.0mm, 18.0mm
▪ Inside sleeve - spring
▪ DIN 3120 33A018 36A518
Spring

Size D L g 36A014 36A514

KT NO. Type mm mm mm
Spring Spring
36A014 12 points 14.0 18.5 63 65 12 / 192
36A018 12 points 18.0 23.8 63 98 8 / 128
D

36A514 6 points 14.0 18.5 63 69 12 / 192

36A518 6 points 18.0 23.8 63 98 8 / 128 L L

146
Spark Plug Socket
KT No. & D1

36B5 3/8"
36B0 36C0 36D0 3/8"
▪ Inside sleeve - rubber
▪ DIN 3120
▪ 36C014 & 36D014 are suitable for BMW, 36B014 36C014
Mini, RENAULT Clio / Twingo / Kangoo type,
PEUGEOT 206 1.4 16V, CITROEN C5 HPI
rubber
Size D L 36B018 36D014
KT NO. Type g
mm mm mm
Rubber
36B514 6 points 14.0 18.5 63 80 12 / 192
36B014 12 points 14.0 18.5 63 80 12 / 192

D
36B018 12 points 18.0 24.7 65 106 8 / 128
36C014 12 points 14.0 18.5 90 112 12 / 144 36B514 L
36D014 12 points 14.0 18.5 250 291 6 / 54 Rubber

KING TONY Spark Plug Sockets

Square Size / KT NO.

Type Rubber I Magnet Rubber II Metal clip
drive inch mm
14 36B514 367514
5/8" 16 363516 366516 367516
6PT
18 367518
13/16" 20.8 363521 366521 367521
14 36B014 367014
3/8"
5/8" 16 363016 366016 367016
18 36B018 367018
12PT
13/16" 20.8 363021 366021 367021
14 36C014
14 36D014
14 463514RC 467514C
6PT 5/8" 16 463516R 466516 467516
13/16" 20.8 463521R 466521 467521
1/2"
14 463014RC 467014C
12PT 5/8" 16 463016R 466016 467016
13/16" 20.8 463021R 466021 467021

147
 Flexible Ring Socket Flexible Crowfoot
Wrench & Set Socket Wrench & Set
• Chrome vanadium alloy steel • Chrome vanadium alloy steel
• Polished, chrome plated • Polished, chrome plated
• 4 ball retaining grooves • 4 ball retaining grooves
KT No. & D1 KT No. & D1

3350M 3/8" 3351M 3/8"

▪ Flexible head folds up to 200° ▪ Flexible head folds up to 200°
▪ Combined with F-handle, handle, T-handle ▪ Combined with F-handle, handle, T-handle
speed-handle speed-handle
▪ Suitable for all hydraulic, fuel, oil brake, A/C, ▪ Suitable for all hydraulic, fuel, oil brake, A/C,
auto tool and air line work auto tool and air line work
▪ DIN 3120 ▪ DIN 3120

L
L

D1

D2
D1

D2

° °
110 110

D1 D2 L
D1 D2 L KT NO. g
KT NO. g mm mm mm mm
mm mm mm mm
335108M 8 15.0 18.8 45.0 44 12 / 360
335008M 8 15.0 18.8 45.0 44 12 / 360
335109M 9 18.0 18.8 49.0 47 12 / 360
335009M 9 18.0 18.8 49.0 49 12 / 360
335010M 10 18.0 18.8 49.0 48 12 / 360 335110M 10 18.0 18.8 49.0 47 12 / 360
335011M 11 22.0 18.8 53.0 58 12 / 360 335111M 11 22.0 18.8 53.0 56 12 / 360
335012M 12 22.0 18.8 53.0 58 12 / 360 335112M 12 22.0 18.8 53.0 55 12 / 360
335013M 13 26.0 18.8 60.0 83 12 / 240 335113M 13 26.0 18.8 60.0 77 12 / 240
335014M 14 26.0 18.8 60.0 80 12 / 240 335114M 14 26.0 18.8 60.0 75 12 / 240
335015M 15 27.0 18.8 60.0 77 12 / 240 335115M 15 27.0 18.8 60.0 75 12 / 240
335016M 16 32.0 24.7 73.5 160 6 / 96 335116M 16 32.0 24.7 73.5 152 6 / 96
335017M 17 33.0 24.7 73.5 159 6 / 96 335117M 17 33.0 24.7 73.5 149 6 / 96
335018M 18 33.0 24.7 73.5 155 6 / 96 335118M 18 33.0 24.7 73.5 155 6 / 96
335019M 19 32.0 24.7 73.5 154 6 / 96 335119M 19 33.3 24.7 73.5 152 6 / 96

3602MR 3/8" 3612MR 3/8"

Metal case size (mm): Metal case size (mm):
296 x 130 x 41 (0.056 cuft) 12 296 x 130 x 41 (0.056 cuft) 12
PC.
PC.

kg 1.89 1 / 10 kg 1.89 1 / 10
Contents Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 8, 9, 10, 11, 12, 13, 14, 15, 16,
3350M 3351M
17, 18, 19 17, 18, 19

148
Glow Plug Socket & Set Universal Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
3785M 3/8" KT No. & D1

▪ The socket has a Sprung-loaded clip 3750M 3750S 3/8"

with ball bearing end to stop the glow D ▪ DIN 3120
plug from falling out L

▪ Suitable for the removal of glow plugs

in most diesel engines

D2

D1
l

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
375010M 10 14.5 18.8 9.0 48.0 59 15 / 240
375011M 11 15.8 18.8 10.0 48.0 57 15 / 240
375012M 12 17.0 18.8 10.0 48.0 56 15 / 240
375013M 13 18.3 18.8 11.0 48.0 56 15 / 240
375014M 14 19.8 18.8 11.0 49.5 58 12 / 192
375015M 15 21.6 18.8 13.0 49.5 64 10 / 160
D1 D2 375016M 16 21.8 18.8 13.0 51.0 63 10 / 160
L 375017M 17 23.7 18.8 14.0 52.5 67 8 / 128
375018M 18 25.3 18.8 14.0 53.4 64 6 / 96
375019M 19 25.7 18.8 16.0 55.8 73 6 / 96
KT NO. mm
D1
mm
D2
mm
L
mm
g
KT NO. D1 D2 ℓ L g
inch mm mm mm mm
378508M 8 13.5 17.8 120 120 10 / 100 375012S 3/8 14.1 18.8 8.5 45.9 57 15 / 240
378509M 9 13.5 17.8 127 120 10 / 100 375014S 7/16 15.9 18.8 10.0 48.9 57 15 / 240
378510M 10 13.5 17.8 128 120 10 / 100 375016S 1/2 18.2 18.8 11.0 47.6 57 15 / 240
378512M 12 17.8 17.8 136 120 10 / 100 375018S 9/16 19.8 18.8 12.5 49.5 58 12 / 192
378514M 14 17.8 17.8 142 120 10 / 100 375020S 5/8 21.5 18.8 13.5 50.5 63 10 / 160
378516M 16 19.8 17.8 157 120 10 / 100 375022S 11/16 23.7 18.8 14.0 52.8 67 8 / 128
375024S 3/4 25.4 18.8 16.5 54.8 73 6 / 96

3716MR 3/8" Bit Socket

• Socket made by chrome vanadium alloy steel
Blow case size (mm): • Bit made by silicon alloy steel (S2)
260 x 160 x 64 (0.094 cuft) D • Polished, chrome plated

In order to get normal life of bit socket,

6 Always use within limited torque to bit.
PC.
3021 3/8"
▪ Phillips head
▪ DIN ISO 8764-1

Overall length g
KT NO. No. mm
302102 PH2 50 35 20 / 400
302103 PH3 50 36 20 / 400
302104 PH4 50 37 20 / 400

3022 3/8"
kg 1.23 1 / 10 ▪ Slotted head
Contents
▪ DIN ISO 8764-1
3785M 8, 9, 10, 12, 14, 16

Tip width Tip thickness Overall length g

KT NO.
mm mm mm

302205 5 1.0 50 36 20 / 400

302208 8 1.2 50 37 20 / 400
302210 10 1.6 50 38 20 / 400

149
 Bit Socket
• Socket made by chrome vanadium alloy steel
• Bit made by silicon alloy steel (S2) KT No. & D1
• Polished, chrome plated
In order to get normal life of bit socket,
Always use within limited torque to bit.
3025 3/8"
▪ Hexagon head
3039 3/8"
▪ DIN 7422/3120
▪ Ribe bit socket
▪ Use for VW, Audi, Fiat cylinder head bolt
▪ DIN 3120

Overall length
KT NO. g
mm mm
302503 H3 50 28 20 / 400
302504 H4 50 30 20 / 400
302505 H5 50 34 20 / 400
302506 H6 50 38 20 / 400
302507 H7 50 38 20 / 400
302508 H8 50 40 20 / 400
Overall length
302509 H9 50 40 20 / 400 KT NO. g
size mm
302510 H10 50 40 20 / 400
303904 M4 90 68 8 / 160
302512 H12 50 42 20 / 400
303905 M5 90 69 8 / 160
303906 M6 90 71 8 / 160
3023 3/8" 303907 M7 90 72 8 / 160
▪ For torx internal screw 303908 M8 90 88 8 / 160
▪ DIN 3120 303909 M9 90 89 8 / 160
303910 M10 90 90 8 / 160

302D 3/8"
▪ For torx plus tamper screw
Overall length g ▪ IPR20 for the operation of the screwed
KT NO. mm mm
connection of the plug-in pump on MERCEDES-
302308 T8 50 28 20 / 400
BENZ Atego and Actros MAZDA 3 1.4 and 1.6
302309 T9 50 28 20 / 400
▪ IPR25 for the screwed connections at the control
302310 T10 50 28 20 / 400
unit and the air flow sensor on VW
302315 T15 50 28 20 / 400
▪ DIN 3120
302320 T20 50 30 20 / 400
302325 T25 50 34 20 / 400
302327 T27 50 38 20 / 400
302330 T30 50 38 20 / 400
302340 T40 50 40 20 / 400
302345 T45 50 40 20 / 400
302350 T50 50 42 20 / 400

3027 3/8"
▪ For tamper resistant torx screw
▪ DIN 3120
Overall length g
KT NO. mm mm
302D08 IPR8 50 33 20 / 400
302D09 IPR9 50 33 20 / 400
Overall length g 302D10 IPR10 50 34 20 / 400
KT NO. mm mm
302D15 IPR15 50 34 20 / 400
302708 T8H 50 28 20 / 400 302D20 IPR20 50 34 20 / 400
302709 T9H 50 28 20 / 400 302D25 IPR25 50 34 20 / 400
302710 T10H 50 28 20 / 400 302D27 IPR27 50 34 20 / 400
302715 T15H 50 28 20 / 400 302D30 IPR30 50 34 20 / 400
302720 T20H 50 30 20 / 400 302D40 IPR40 50 38 20 / 400
302725 T25H 50 34 20 / 400 302D45 IPR45 50 38 20 / 400
302727 T27H 50 38 20 / 400 302D50 IPR50 50 40 20 / 400
302730 T30H 50 38 20 / 400 302D55 IPR55 50 47 15 / 300
302740 T40H 50 40 20 / 400 302D60 IPR60 50 51 12 / 240
302745 T45H 50 40 20 / 400
302750 T50H 50 42 20 / 400
150
Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk
KT No. & D1

3725 FINE
GEAR 3/8"
▪ Reversible ratchet
▪ 8° gear action degree (45 teeth)
▪ DIN 3122
Overall length g
KT NO. inch mm 3725-08F
3725-08F 8 203 333 2 / 40
3725-08G 8 207 387 2 / 32
3725DK
3725DK renewal kits - - 3725-08G

3755 FINE
GEAR 3/8"
▪ Reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN 3122
Overall length g
KT NO. inch mm
3755-08G 8 200 201 2 / 40
3755DK renewal kits - -
3755DK
3755-08G

3756 FINE
GEAR 3/8"
▪ Quick release reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN 3122
Overall length g
KT NO. inch mm
3756-08G 8 200 387 2 / 40
3756DK renewal kits - -

3756DK quick release

3752 FINE
GEAR 3/8"
▪ Quick release flexible and
reversible rathet
▪ 5° gear action degree (72 teeth)
▪ Multi-angle design for difficult-to-
reach fasteners

Overall length g 3752-09P

KT NO. inch mm
3752-09P 9 235 409 2 / 32
3752-09G 9 235 378 2 / 32
3752DK renewal kits - - 3752-09G
3752DK quick release

3760 MINI
RATCHET
FINE
GEAR 3/8"
▪ Mini reversible ratchet
▪ 6° gear action degree (64 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g
KT NO. inch mm
3760-45 4-3/8 110 120 6 / 108
3760DK renewal kits - -
3760DK 3760-45

151
 Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk
KT No. & D1

3761 FINE
GEAR 3/8"
▪ Quick release reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
3761-08F
Overall length g
KT NO. inch mm
3761-08F 8 200 358 2 / 40
3761-08P 8 200 333 2 / 40
3761-08P
3761DK renewal kits - -
3761DK

3769 3/8"
▪ Reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
3769-08F
Overall length
KT NO. g
inch mm
3769-08F 8 200 358 2 / 40 3769DK
3769-08P 8 200 358 2 / 40 3769-08P
3769DK renewal kits - -

3771 3/8"
▪ Quick release reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g 3771-08F
KT NO. inch mm
3771-08F 8 200 370 2 / 40
3771-08G 8 200 272 2 / 40
3771-08G
3771DK renewal kits - - 3771DK

3779 3/8"
▪ Reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length 3779-08F
KT NO. g
inch mm
3779-08F 8 200 355 2 / 40
3779-08G 8 200 280 2 / 40 3779DK
3779-08G
3779DK renewal kits - -

3781 3/8"
▪ Quick release flexible and reversible satchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length g 3781-11F
KT NO. inch mm
3781-11F 11 280 467 2 / 40
3781-11P 11 280 432 2 / 40
3781-11P
3781DK renewal kits - - 3781DK

152
Ratchet • Material
- chrome vanadium alloy steel handle
• Finishing
- polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk
KT No. & D1

3789 3/8"
▪ Flexible and reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length 3789-11F
KT NO. g
inch mm
3789-11F 11 280 480 2 / 40
3789-11P 11 280 490 2 / 40 3789DK 3789-11P
3789DK renewal kits - -

Accessory
• Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated & black phosphate sunk
KT No. & D1

3221 3/8"
▪ Extension bar
▪ DIN 3123
Overall length g
KT NO. inch mm
3221-16 1-3/4 44 39 12 / 360
3221-03 3 75 75 12 / 240
3221-06 6 150 146 6 / 120
3221-10 10 250 240 6 / 96
3221-18 18 450 428 1 / 50
3221-24 24 600 570 1 / 50

3223 3/8"
▪ Offset extension bar The offset extension bar has less strength than
▪ Max. torque:150 Nm normal extension bar. Do not use as a normal
▪ DIN 3123 extension bar.
Overall length g
KT NO. inch mm
3223-14 1-1/2 38 41 14 / 224
3223-02 2 50 51 12 / 360
3223-03 3 75 75 12 / 240
3223-06 6 150 146 6 / 120
3223-10 10 250 240 6 / 96

3293 3/8"
▪ Multi-function of extension bar and offset
extension bar
▪ Max. torque:150 Nm

Overall length g
KT NO. 1.offset extension bar
inch mm
or
3293-03 3 75 80 12 / 240
3293-06 6 150 140 6 / 120 2.extension bar
3293-10 10 250 240 6 / 96

153
 Accessory
• Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated

3311 3/8"
▪ Flexible extension bar
▪ DIN 3120
KT No. & D1
Overall length g
KT NO. inch mm
3311-06 6 150 148 5 / 100
3311-12 12 300 172 12 / 108

3452 3/8"
▪ Flexible handle
▪ Action degree -180°
▪ DIN 3122 KT No. & D1

Overall length g 3452-08F

KT NO. inch mm
3452-10F
3452-08F 8 205 259 4 / 80
3452-08G 8 205 278 2 / 40 3452DK
3452-10F 10 250 319 4 / 64 3452-08G
3452-10G 10 250 325 4 / 64 3452-10G

3571 3/8"
▪ Sliding T-handle
▪ DIN3122
KT No. & D1

Overall length g
KT NO. inch mm
3571-08 8 200 182 4 / 80

3792 3/8"
▪ Universal joint
▪ DIN3123
KT No. & D1
Overall length g
KT NO. inch mm
3792 2 50 67 15 / 300

3794 3/8"
▪ Universal joint
▪ 30° rotation
Ø 18 KT No. & D1
▪ Short pattern design enables
30°

greater access in confined spaces

4 6

Overall length g
KT NO. inch mm
3794 1-4/5 46 45 15 / 300

154
Accessory • Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated
KT No. & D1

3812 3814 3/8"

▪ Adapter
▪ Convert to 1/4" drive or 1/2" drive
▪ 3812→Max. torque:81 Nm
▪ DIN 3123, ISO3316 1/4" drive (M)
3/8" drive (F)
1/2" drive (M)

KT NO. Spec. g

3812 3/8"Fx1/4"M 31 12 / 192 3812 / 3814

3814 3/8"Fx1/2"M 47 12 / 360

3148 3/8"
▪ Bit holder
▪ DIN 3120 / 3126
Overall length g
KT NO. Size mm
314808S 1/4" 30 33 12 / 360
314810S 5/16" 30 35 12 / 360
314810M 10 mm 30 35 12 / 360

Socket Rail Set

3013MR 3013SR 3513MR 3/8"
▪ Socket rail 290mmL
13
PC.

kg
KT NO. Contents 0.52 35

7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,

3013MR 18, 19 8731213
3330M

1/4, 5/16, 11/32, 3/8, 7/16, 15/32,

3013SR 1/2, 9/16, 19/32, 5/8, 11/16, 3/4,
3330S 13/16

7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,

3513MR 18, 19
3335M

155
 Socket Rail Set
3508MR10 3/8" 3129PR 3/8"
▪ Socket rail 210mmL ▪ Socket rail 210 mmL
9
8 PC.
PC.

kg 0.27 40
Contents
kg
Contents 0.65 24 E4, E5, E6, E7, E8, E10, E12, E14,
3375M
E16
3235M 10, 11, 12, 13, 14, 16, 17, 19
8730809
8730808

3106PR 3/8" 3105PR 3/8"

▪ Socket rail 150mmL ▪ 3/8" + 1/2" drive ribe bit socket set
▪ Socket rail 150mmL
6 5
PC. PC.

kg 0.28 40
Contents

3375M E8, E10, E12, E14, E16, E18

8730606

3116PR 3/8"
kg
Contents 0.75 30

▪ Socket rail 150mmL 3039 M7, M8

6 4049 M10, M12, M13

PC.
8740606

3108PR8 3/8"
Kg
▪ Socket rail 210mmL
Contents 0.39 50

3275M E4, E5, E8, E10, E12, E14 8

PC.
8730606

3121PR 3/8"
▪ Socket rail 290 mmL
11 kg
PC. Contents 0.34 50

3025 H3, H4, H5, H6, H7, H8 H10, H12

kg 0.32 35
Contents 8730808
E4, E5, E6, E7, E8, E10, E11, E12,
3375M
E14, E16, E18
8731213

156
Socket Rail Set 3109PR8 / 3119PR8 / 3149PR8 / 3131PR8

Packing

3118PR 3/8"
▪▪Socket rail 210mmL
3146PR 3/8"
▪▪Socket rail 150mmL
8
PC. 6
PC.

kg 0.34 50
Contents

T15, T20, T25, T27, T30, T40, T45,

3023 kg
T50 Contents 0.36 50

8730808 IPR10, IPR15, IPR20, IPR25, IPR27,

302D
IPR30

8730606
3109PR8 3/8"
▪▪Socket rail 210mmL
3149PR8 3/8"
9 ▪▪Socket rail 210mmL
PC.
9
PC.

kg 0.36 50
Contents
T10, T15, T20, T25, T27, T30, T40,
3023
T45, T50

8730809 kg 0.36 50
Contents

IPR10, IPR15, IPR20, IPR25, IPR27,

302D
3119PR8 3/8" IPR30, IPR40, IPR45, IPR50

▪▪Socket rail 210mmL 8730809

9
PC.

Socket Set
• Material - chrome vanadium alloy steel
Contents kg 0.36 50 • Finishing - polished, chrome plated & black phosphate
sunk
T10H, T15H, T20H, T25H, T27H,
3027
T30H, T40H, T45H, T50H 3007MR01 3/8"
8730809

5
PC.
3131PR8 3/8"
▪▪Socket rail 210mmL

11
PC.
kg 0.98 20
Contents

366516 3789-11F
kg 0.4 48
Contents 3221-06
366021
T8H, T9H, T10H, T15H,T20H, T25H, 3221-16
3027
T27H, T30H, T40H, T45H, T50H

8730811

157
 Extension Bar Set Socket Set

3113PR 3/8" 3508MR 3/8"

Metal case size (mm):
203 x 79 x 41 (0.023 cuft)
3 8
PC. PC.

kg 0.5 35
Contents
3221 3", 6", 10"

Kg 1.0 1 / 20
Contents

3103PR 3/8" 3235M 10, 11, 12, 13, 14, 16, 17, 19

3 3508SR 3/8"
PC.
Metal case size (mm):
203 x 79 x 41 (0.023 cuft)
8
PC.

Contents kg 0.4 35

3223 3", 6", 10"

Socket Rail Contents

Kg 1.0 1 / 20
3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
3235S
3/4, 13/16
873 3/8"
▪ Rail length from 160 mm to 560 mm

• Customer Selected

L
KT NO.
(mm)

870406 160
870311 280
870422 560
8730 -

158
Socket Set
3020MR 3020SR 3020MR02 3/8"
3020SR02 3520MR 3520MR02 3/8"
Metal case size (mm) :
372 x 153 x 40 (0.08 cuft)
20
PC.

3020MR / 3520MR 3020MR02 / 3520MR02

3020SR 3020SR02
Kg
KT NO. Contents

3020MR 2.5
6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19,
3769-08F 3452-08F
21, 22
3020MR02 3330M 2.8
3779-08F 3452-08G 3221-03
363021 3221-06
3020SR 2.5
1/4, 5/16, 11/32, 3/8, 7/16, 15/32, 3769-08F 3452-08F
1/2, 9/16, 19/32, 11/16, 3/4, 13/16, 1/6
3330S 7/8 3571-08
3020SR02 2.8
3779-08F 3452-08G

3520MR 2.5
6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19,
3769-08F 3452-08F 3792
21, 23
3335M 363521
3520MR02 2.8
3779-08F 3452-08G

3023MR 3023MR04 3523MR 3523MR04 3/8"

Metal case size (mm) :
372 x 153 x 40 (0.08 cuft)
22
PC.

3023MR / 3523MR 3023MR04 / 3523MR04

Kg
KT NO. Contents

3023MR 3221-03
3330M 3221-06 2.8 1/6
3769-08F
3523MR
3335M 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 3571-08
17, 19, 20, 21, 22
3023MR04
3330M 3452-08F
3.0 1/6
3755-08G
3523MR04 3792
3335M

159
 Socket Set

3523MRV10 EVA Tray #10 3/8"

Plastic case size (mm) :
389 x 185 x 66 (0.168 Cuft)
Contents
kg 2.43 1 / 10 23
PC.
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
3335M
17, 19, 21, 22, 23, 24
3771-08G 3792
3571-08 3452-08G
3293-03
3293-06

3024MR 3024SR 3524MR 3/8"

Metal case size (mm) :
318 x 147 x 46 (0.076 cuft)

24
PC.

3024MR/3524MR 3024SR

Kg 2.2 1 / 10
KT NO. Contents

3024MR PH2,PH3 5,8

3330M 3021 3022
6, 7, 8, 9, 10, 11, 13, 14, 17, 19
H3, H4, H5, H6,
3524MR H7, H8, H10
3025
3335M

1/4, 5/16, 11/32, 3/8, 7/16, 1/2,

3024SR 3779-08G 3221-06 3792
9/16, 5/8, 11/16, 3/4
3330S

160
Socket Set

3027MR 3027SR 3527MR 3/8"

Metal case size (mm) :
318 x 147 x 46 (0.076 cuft)
26
PC.

3027MR/3527MR 3027SR
Kg 2.6 1 / 10
KT NO. Contents

3027MR
3330M 3235M
7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19 8, 10, 11, 12, 13, 14, 3779-08G 3812
3527MR 16, 17, 19
3335M

1/4, 5/16, 11/32, 3/8, 7/16,15/32, 1/2, 9/16, 19/32, 5/8, 3221-03 3792
11/16, 3/4, 13/16
3027SR 3330S

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16

3235S

3034MR 3534MR 3/8"

Metal case size (mm) :
372 x 153 x 40 (0.08 cuft) 36
PC.

Kg
KT NO. Contents 3.1 1/6

E4, E5, E6, E7, E8, E10,

3034MR 3779-08G 3221-03
3330M 3375M E12, E14, E16, E18 3221-06
6, 7, 8, 9, 10, 11, 13,
14, 17, 19 T8, T9, T10, T15, T20, 3792
3534MR T25, T27, T30, T40, T45 3571-08
3023
3335M 3452-10F

161
 Socket Set

3036CR 3/8"
Metal case size (mm) :
372 x 153 x 40 (0.08 cuft)

36
PC.

Kg
Contents 3.27 1/6

6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 20, 21,
22
3330M 3769-08F 3452-08F 3221-03
3221-06
1/4, 5/16, 11/32, 3/8, 7/16, 15/32, 1/2, 9/16,
19/32, 5/8, 11/16, 3/4, 13/16, 7/8 3571-08 3792
3330S

3537MR 3/8"
Metal case size (mm) :
372 x 153 x 40 (0.08 cuft) 39
PC.

Kg 3.17 1/6
Contents

T8, T9, T10, T15, T20, T25, T27, T30, T40, T45
3023
3779-08G 3221-03 3792
3221-06
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19
3335M

E4, E5, E6, E7, E8, E10, E12, E14, E16, E18 3452-10F 3571-08
3375M

162
Socket Set

3050MR 3/8" 3568MR 3/8"

Blow case size (mm) : Metal shelf size (mm) :
405 x 310 x 80 (0.36 cuft) 415 x 336 x 320 (1.58 cuft)

50 268
PC. PC.

kg 1/4
Contents 4.65 Contents Each Q'ty

3235M 8, 10, 12, 13 8,9,10,11,12,13 10

6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
3330M 3335M 14,15,16,17,18,19 8
17, 18, 19, 22
1060 8, 10, 12, 13, 14, 17, 19 21,22,23,24 6

1421 PH2 x 100 7,8,9,10,11,12,13 10

1422 5.5 x 100 3235M 14,15,16,17,18,19 8

1120MR H3, H4, H5, H6, H7, H8, H10 21,22,24 6

1832T T15, T20, T25, T30, T40, T45, T50

kg
KT NO. Spec. Cuft
363516 6111-06 3734-10F
3568MR-A 87102 6.85 0.67
363021 3221-03 268 PC.
3568MR-D 16.93 0.38
3221-06 socket content
3792 314810S 3571-08

163
 Standard Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

4330MR 1/2" 4330SR 1/2"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1

D1

D2
D1

D2

l
l
L
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
433008MR 8 13.2 23.3 7.0 38 57 10 / 200 433010SR 5/16 13.2 21.8 7.0 38 55 10 / 200
433009MR 9 14.0 23.3 7.0 38 60 10 / 200 433012SR 3/8 15.0 21.8 7.0 38 59 10 / 200
433010MR 10 15.0 23.3 8.0 38 58 10 / 200 433013SR 13/32 15.0 23.3 7.0 38 58 10 / 200
433011MR 11 16.4 23.3 8.0 38 58 10 / 200 433014SR 7/16 16.4 23.3 8.0 38 60 10 / 200
433012MR 12 17.8 23.3 9.0 38 60 10 / 200 433015SR 15/32 18.0 23.3 8.0 38 62 10 / 200
433013MR 13 19.0 23.3 10.0 38 60 10 / 200 433016SR 1/2 19.0 23.3 10.0 38 62 10 / 200
433014MR 14 20.4 23.3 11.0 38 61 10 / 200 433018SR 9/16 20.4 23.3 11.0 38 62 10 / 200
433015MR 15 21.6 23.3 11.0 38 62 10 / 200 433019SR 19/32 21.6 23.3 11.0 38 64 10 / 200
433016MR 16 22.5 23.3 11.0 38 63 10 / 200 433020SR 5/8 22.5 23.3 11.0 38 62 10 / 200
433017MR 17 24.0 23.2 12.0 38 66 10 / 200 433022SR 11/16 24.0 23.2 12.0 38 70 10 / 200
433018MR 18 25.2 23.2 13.0 38 66 10 / 200 433024SR 3/4 27.0 23.2 13.0 38 83 10 / 160
433019MR 19 27.0 23.2 13.0 38 73 10 / 160 433025SR 25/32 28.0 23.2 13.0 38 85 10 / 160
433020MR 20 27.9 23.2 13.0 38 86 10 / 160 433026SR 13/16 28.6 23.2 13.0 38 95 10 / 160
433021MR 21 28.9 23.2 14.0 38 97 10 / 160 433028SR 7/8 30.2 24.0 15.0 40 102 10 / 160
433022MR 22 30.2 24.0 15.0 40 99 10 / 160 433030SR 15/16 32.6 26.0 17.0 42 112 8 / 160
433023MR 23 31.2 25.0 15.0 40 99 8 / 160 433032SR 1 34.8 26.8 17.0 42 130 8 / 160
433024MR 24 32.1 26.0 17.0 42 113 8 / 160 433034SR 1-1/16 36.6 28.0 19.0 42 135 6 / 120
433025MR 25 33.4 27.0 17.0 42 125 8 / 160 433036SR 1-1/8 39.0 30.0 21.0 44 160 6 / 120
433026MR 26 35.0 28.0 17.0 42 130 6 / 120 433038SR 1-3/16 40.0 29.5 21.0 44 169 6 / 120
433027MR 27 36.6 28.0 19.0 42 135 6 / 120 433040SR 1-1/4 42.5 30.0 23.0 44 173 6 / 120
433028MR 28 37.8 30.0 20.0 42 151 6 / 120 433044SR 1-3/8 46.0 33.0 24.0 46 248 6 / 96
433029MR 29 39.0 30.0 21.0 44 169 6 / 120
433030MR 30 40.0 29.5 21.0 44 169 6 / 120
433032MR 32 42.5 30.0 23.0 44 173 6 / 120
433033MR 33 43.0 30.0 24.0 46 217 6 / 96
433034MR 34 45.0 30.0 24.0 46 231 6 / 96
433036MR 36 47.0 33.0 24.0 46 238 6 / 96

164
Standard Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

4335MR 1/2" 4335SR 1/2"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1

D1

D2
D1

D2

l l

L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
433506MR 6 12.0 23.3 7.0 38 53 10 / 200 433510SR 5/16 13.2 21.8 7.0 38 60 10 / 200
433507MR 7 12.6 23.3 7.0 38 52 10 / 200 433512SR 3/8 15.0 21.8 7.0 38 58 10 / 200
433508MR 8 13.2 23.3 7.0 38 61 10 / 200 433514SR 7/16 16.4 23.3 8.0 38 60 10 / 200
433509MR 9 14.0 23.3 7.0 38 59 10 / 200 433515SR 15/32 18.0 23.3 8.0 38 63 10 / 200
433510MR 10 15.0 23.3 8.0 38 60 10 / 200 433516SR 1/2 19.0 23.3 10.0 38 61 10 / 200
433511MR 11 16.4 23.3 8.0 38 60 10 / 200 433518SR 9/16 20.4 23.3 11.0 38 61 10 / 200
433512MR 12 17.8 23.3 9.0 38 61 10 / 200 433519SR 19/32 21.6 23.3 11.0 38 65 10 / 200
433513MR 13 19.0 23.3 10.0 38 63 10 / 200 433520SR 5/8 22.5 23.3 11.0 38 60 10 / 200
433514MR 14 20.4 23.3 11.0 38 63 10 / 200 433522SR 11/16 24.0 23.2 12.0 38 67 10 / 200
433515MR 15 21.6 23.3 11.0 38 66 10 / 200 433524SR 3/4 27.0 23.2 13.0 38 87 10 / 160
433516MR 16 22.5 23.3 11.0 38 64 10 / 200 433525SR 25/32 28.0 23.2 13.0 38 96 10 / 160
433517MR 17 24.0 23.2 12.0 38 68 10 / 200 433526SR 13/16 28.6 23.2 13.0 38 91 10 / 160
433518MR 18 25.2 23.2 13.0 38 75 10 / 200 433528SR 7/8 30.2 24.0 15.0 40 102 10 / 160
433519MR 19 27.0 23.2 13.0 38 86 10 / 160 433530SR 15/16 32.6 26.0 17.0 42 118 8 / 160
433520MR 20 27.9 23.2 13.0 38 95 10 / 160 433532SR 1 34.8 26.8 17.0 42 143 8 / 160
433521MR 21 28.9 23.2 14.0 38 97 10 / 160 433534SR 1-1/16 36.6 28.0 19.0 42 167 6 / 120
433522MR 22 30.2 24.0 15.0 40 105 10 / 160 433536SR 1-1/8 39.0 30.0 21.0 44 163 6 / 120
433523MR 23 31.2 25.0 15.0 40 118 8 / 160 433538SR 1-3/16 40.0 29.5 21.0 44 214 6 / 120
433524MR 24 32.1 26.0 17.0 42 138 8 / 160 433540SR 1-1/4 42.5 30.0 23.0 44 226 6 / 120
433525MR 25 33.4 27.0 17.0 42 141 8 / 160
433526MR 26 35.0 28.0 17.0 42 158 6 / 120
433527MR 27 36.6 28.0 19.0 42 161 6 / 120
433528MR 28 37.8 30.0 20.0 42 162 6 / 120
433529MR 29 39.0 30.0 21.0 44 199 6 / 120
433530MR 30 40.0 29.5 21.0 44 214 6 / 120
433532MR 32 42.5 30.0 23.0 44 236 6 / 120
433533MR 33 43.0 30.0 24.0 46 227 6 / 96
433534MR 34 45.0 30.0 24.0 46 231 6 / 96
433536MR 36 47.0 33.0 24.0 46 248 6 / 96
433538MR 38 49.0 34.0 25.0 50 241 6 / 60
433539MR 39 50.0 34.0 25.0 50 240 6 / 60
433541MR 41 53.0 36.0 27.0 53 284 6 / 36
433546MR 46 59.0 40.0 30.0 58 500 4 / 32

165
 Socket Set
4072MR 172
PC. 4072SR 136
PC. 4572MR 172
PC. 4572SR 136
PC.
1/2"
Metal shelf size (mm) :
415x 336 x 320 (1.58 cuft)

4072MR / 4572MR

Each Kg
KT NO. Contents KT NO. Spec. Cuft
Q'ty

8 4072MR
4072MR 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, -A 87103 6.37 0.67
4330MR 7 4572MR
19, 20, 21, 22, 23, 24, 25, 26. 27, 28, 29,
30, 32 6 4072MR -D 172 PC.
4572MR 17.73 0.38
4335MR 5 4572MR socket content

8 4072SR -A
4072SR 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 87103 6.37 0.67
4330SR 4572SR
5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 7
15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 6 4072SR -D 136 PC.
4572SR 13.0 0.28
4335SR 5 4572SR socket content

166
Deep Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

4230M 1/2" 4230S 1/2"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1

D2

D2
D1

D1
l l
L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
423008M 8 13.2 22.0 16 77 107 6 / 120 423010S 5/16 13.2 22.0 9 77 107 6 / 120
423009M 9 14.0 22.0 16 77 112 6 / 120 423012S 3/8 14.7 22.0 10 77 116 6 / 120
423010M 10 15.2 23.7 24 77 116 6 / 120 423014S 7/16 16.3 23.7 12 77 119 6 / 120
423011M 11 16.3 23.7 24 77 119 6 / 120 423016S 1/2 18.7 23.7 14 77 125 6 / 120
423012M 12 17.7 23.7 24 77 123 6 / 120 423018S 9/16 20.2 23.7 15 77 138 6 / 120
423013M 13 18.7 23.7 24 77 125 6 / 120 423020S 5/8 22.6 23.7 17 77 147 6 / 96
423014M 14 20.2 23.7 35 77 138 6 / 120 423022S 11/16 23.7 23.2 35 77 151 6 / 96
423015M 15 21.3 23.7 35 77 138 6 / 120 423024S 3/4 25.7 23.2 35 77 176 6 / 96
423016M 16 22.6 23.7 35 77 147 6 / 96 423026S 13/16 27.7 25.0 37 77 190 6 / 96
423017M 17 23.7 23.2 35 77 151 6 / 96 423028S 7/8 29.8 26.0 37 77 203 6 / 96
423018M 18 25.5 23.2 35 77 182 6 / 96 423030S 15/16 31.8 28.5 37 77 205 5 / 60
423019M 19 25.7 23.2 35 77 176 6 / 96 423032S 1 33.8 29.5 37 77 277 5 / 60
423020M 20 27.7 24.0 35 77 201 6 / 96 423034S 1-1/16 36.6 31.5 28 77 305 5 / 60
423021M 21 27.7 25.0 35 77 220 6 / 96 423036S 1-1/8 37.8 32.5 28 77 306 5 / 50
423022M 22 29.8 26.0 35 77 205 6 / 96 423038S 1-3/16 39.8 34.5 34 77 319 5 / 50
423023M 23 31.2 27.5 35 77 207 5 / 60 423040S 1-1/4 41.8 36.0 34 77 330 5 / 50
423024M 24 31.8 28.5 35 77 195 5 / 60
423025M 25 33.4 29.5 35 77 227 5 / 60
423026M 26 34.8 30.5 35 77 252 5 / 60
423027M 27 36.6 31.5 34 77 304 5 / 60
423028M 28 37.8 32.5 34 77 304 5 / 50
423029M 29 38.8 33.5 34 77 308 5 / 50
423030M 30 39.8 34.5 34 77 319 5 / 50
423032M 32 41.8 36.0 34 77 334 5 / 50
423033M 33 43.8 38.5 35 77 360 5 / 50
423036M 36 46.8 40.5 36 77 443 2 / 40

167
 Deep Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

4235M 1/2" 4235S 1/2"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1

D2
D1
D2
D1

l
L

l
KT NO. D1 D2 ℓ L g
L
inch mm mm mm mm
423510S 5/16 13.2 22.0 16 77 116 6 / 120

KT NO. D1 D2 ℓ L g
423512S 3/8 14.7 22.0 16 77 116 6 / 120
mm mm mm mm mm 423514S 7/16 16.3 23.7 24 77 118 6 / 120
423508M 8 13.2 22.0 16 77 113 6 / 120 423516S 1/2 18.7 23.7 24 77 130 6 / 120
423509M 9 14.0 22.0 16 77 114 6 / 120 423518S 9/16 20.2 23.7 35 77 138 6 / 120
423510M 10 15.2 23.7 24 77 116 6 / 120 423520S 5/8 22.6 23.7 35 77 139 6 / 96
423511M 11 16.3 23.7 24 77 118 6 / 120 423522S 11/16 23.7 23.2 35 77 115 6 / 96
423512M 12 17.7 23.7 24 77 125 6 / 120 423524S 3/4 25.7 23.2 35 77 140 6 / 96
423513M 13 18.7 23.7 24 77 124 6 / 120 423526S 13/16 27.7 25.0 35 77 163 6 / 96
423514M 14 20.2 23.7 35 77 127 6 / 120 423528S 7/8 29.8 26.0 35 77 166 6 / 96
423515M 15 21.3 23.7 35 77 140 6 / 120 423530S 15/16 31.8 28.5 35 77 195 5 / 60
423516M 16 22.6 23.7 35 77 139 6 / 96 423532S 1 33.8 29.5 35 77 277 5 / 60
423517M 17 23.7 23.2 35 77 132 6 / 96 423534S 1-1/16 36.6 31.5 34 77 239 5 / 60
423518M 18 25.5 23.2 35 77 136 6 / 96 423536S 1-1/8 37.8 32.5 34 77 309 5 / 50
423519M 19 25.7 23.2 35 77 151 6 / 96 423538S 1-3/16 39.8 34.5 34 77 307 5 / 50
423520M 20 27.7 24.0 35 77 194 6 / 96 423540S 1-1/4 41.8 36.0 34 77 334 5 / 50
423521M 21 27.7 25.0 35 77 163 6 / 96 423542S 1-5/16 44.0 38.5 35 77 377 5 / 50
423522M 22 29.8 26.0 35 77 166 6 / 96 423544S 1-3/8 46.0 38.5 35 77 401 2 / 40
423523M 23 31.2 27.5 35 77 208 5 / 60 423546S 1-7/16 47.5 40.5 36 77 424 2 / 40
423524M 24 31.8 28.5 35 77 212 5 / 60 423548S 1-1/2 49.0 40.5 38 77 496 2 / 40
423525M 25 33.4 29.5 35 77 224 5 / 60
423526M 26 34.8 30.5 35 77 244 5 / 60
423527M 27 36.6 31.5 34 77 270 5 / 60
423528M 28 37.8 32.5 34 77 312 5 / 50
423529M 29 38.8 33.5 34 77 309 5 / 50
423530M 30 39.8 34.5 34 77 307 5 / 50
423532M 32 41.8 36.0 34 77 334 5 / 50
423533M 33 43.8 38.5 35 77 346 5 / 50
423536M 36 46.8 40.5 36 77 410 2 / 40
423538M 38 49.0 40.5 38 77 490 2 / 40
423541M 41 53.0 40.5 40 77 665 2 / 24

168
Deep Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves KT No. & D1

4245M EXTENDED
LENGTH 1/2" 4255M EXTENDED
LENGTH 1/2"
▪ DIN 3120 ▪ DIN 3120
D1

D2

D1

D2
l
L l

KT NO. D1 D2 ℓ L g
L

mm mm mm mm mm
KT NO. D1 D2 ℓ L g
424508M 8 13.2 22.0 9.0 90 110 6 / 120 mm mm mm mm mm
424509M 9 14.0 22.0 10.0 90 113 6 / 120 425508M 8 13.2 22.0 9 120 135 6 / 96
424510M 10 15.2 23.7 11.0 90 133 6 / 120 425509M 9 14.0 22.0 10 120 145 6 / 96
424512M 12 17.7 23.7 13.0 90 155 6 / 120 425510M 10 15.2 23.7 11 120 162 6 / 96
424513M 13 18.7 23.7 14.0 90 157 6 / 120 425512M 12 17.7 23.7 13 120 200 6 / 96
424514M 14 20.2 23.7 15.0 90 162 6 / 120 425513M 13 18.7 23.7 14 120 202 6 / 96
425514M 14 20.2 23.7 15 120 217 6 / 96

4066MR 165
PC. 4066SR 114
PC. 4566MR 165
PC.
1/2"
Metal shelf size (mm) :
415x 336 x 320 (1.58 cuft)

4066MR / 4566MR

Each Kg
KT NO. Contents KT NO. Spec. Cuft
Q'ty

8 4066MR
4066MR 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 -A 87103 5.87 0.62
4230M 7 4566MR
19, 20, 21, 22, 23, 24, 26, 27, 28, 29, 30
32 6 4066MR -D 165 PC.
4566MR 30.70 0.63
4235M 5 4566MR socket content

8 4066SR -A 87103 5.87 0.62

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16
7
4066SR 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8,
4230S 6
1-3/16, 1-1/4 114 PC.
5 4066SR -D 21.0 0.47
socket content

169
 Star Socket Square Socket
• Chrome vanadium alloy steel, polished, KT No. & D1
chrome plated
• 4 ball retaining grooves KT No. & D1
4014M 1/2"
▪ 4 ball retaining grooves
4375M 1/2" ▪ Chrome vanadium steel
▪ For torx external screw ▪ Polished, chrome plated
▪ Chrome vanadium steel ▪ DIN 3120
▪ Polished, chrome plated
▪ DIN 3120

D
D1

D2

D1 D2 ℓ L g KT NO. D ℓ L g
KT NO. mm mm mm mm
mm mm mm mm mm
437510M E10 13.2 23.8 7.5 37 60 10 / 200 401408M RB8.0 23.5 13.5 35 60 10 / 200
437512M E12 15.0 23.8 9.0 37 62 10 / 200 401409M RB9.5 23.5 13.5 35 68 10 / 200
437514M E14 16.4 23.8 10.0 37 64 10 / 200 401410M RB10.0 23.5 13.5 35 72 10 / 200
437516M E16 18.8 23.8 11.0 37 68 10 / 200 401411M RB10.5 23.5 13.5 35 78 10 / 200
437518M E18 20.5 23.8 12.5 39 72 10 / 200 401412M RB12.0 23.5 13.5 35 90 10 / 200
437520M E20 22.8 23.8 14.0 39 74 10 / 200 401413M RB12.7 23.5 13.5 35 97 10 / 200
437522M E22 24.6 23.8 16.0 39 75 10 / 200 401414M RB13.5 23.5 13.5 35 106 10 / 200
437524M E24 26.5 23.8 16.0 39 83 10 / 160 401419M RB19.0 25.0 15.5 40 130 10 / 160

4275M 1/2"
▪ Long type
▪ Chrome vanadium steel
▪ Polished, chrome plated
▪ DIN 3120
D1

D2

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
427510M E10 13.2 23.8 7.5 77 109 6 / 120
427512M E12 15.0 23.8 9.0 77 119 6 / 120
427514M E14 16.4 23.8 10.0 77 125 6 / 120
427516M E16 18.8 23.8 11.0 77 138 6 / 120
427518M E18 20.5 23.8 12.5 77 149 6 / 120
427520M E20 22.8 23.8 14.0 77 167 6 / 120
427522M E22 24.6 23.8 16.0 77 172 6 / 96
427524M E24 26.5 23.8 16.0 77 191 6 / 96

170
Spark Plug Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

4630 4635 4660 4665 1/2"

4670 4675
▪ 6 / 12 points
▪ Size combined
- 16.0mm (5/8") 463014RC - Thin walled design 463514RC - Thin walled design
- 20.8mm (13/16")
▪ Inside sleeve Magnet
- rubber
- magnet 463016R- Thin walled design 466016 - Thin walled design
▪ DIN 3120
▪ 14mm use for Toyota Yaris, Vios

Size D L g
KT NO. Type inch mm mm mm 463516R - Thin walled design 466516 - Thin walled design
12 points
463014RC Rubber - 14.0 19.05 70 70 12 / 240
12 points
463016R Rubber 5/8 16.0 20.75 70 110 10 / 200
12 points 467514C
466016 5/8 16.0 20.75 70 115 10 / 200

D
Magnet
6 points
463514RC Rubber - 14.0 19.05 70 70 12 / 240 L

Metal clip
6 points 467014C
463516R Rubber 5/8 16.0 20.75 70 110 10 / 200
6 points
466516 Magnet 5/8 16.0 20.75 70 115 10 / 200
12 points
463021R Rubber 13/16 20.8 27.7 70 160 12 / 120
12 points
466021 Magnet 13/16 20.8 27.7 70 165 12 / 120 463021R 466021
6 points
463521R Rubber 13/16 20.8 27.7 70 155 12 / 120
6 points
466521 Magnet 13/16 20.8 27.7 70 160 12 / 120
12 points
467014C Metal clip
- 14.0 19.05 70 70 12 / 240
12 points 463521R 466521
467016 Metal clip
5/8 16.0 20.75 70 110 10 / 200 Rubber Magnet

12 points
467021 Metal clip
13/16 20.8 27.7 70 165 12 / 120
D
D

6 points
467514C Metal clip
- 14.0 19.05 70 70 12 / 240
6 points L L
467516 Metal clip
5/8 16.0 20.75 70 110 10 / 200
6 points
467521 Metal clip
13/16 20.8 27.7 70 168 12 / 120

Ribe Socket M10S Ribe Socket M12S

9AW4911 1/2" 9AW4901 1/2"
▪ Used for replacing and removing idler pulley ▪ Used for replacing and removing engine head
center screw on TOYOTA ALTIS screw and flywheel center screw on NISSAN models
D1
D1

ℓ
ℓ L
L

D1 ℓ L KT NO. D1 ℓ L g
KT NO. g
mm mm mm
mm mm mm
9AW4911 19 10 33.8 16 10 / 200 9AW4901 22 14 38 72.0 10 / 200

171
 Roller Stud Extractor Socket & Set Damaged Nuts Remover Socket & Set
9TD401 1/2" 9TD403 1/2"
▪ For tightening or loosening studs ▪ Made of top quality SNCM alloy steel, provide
good wear resistance and durability
KT No. & D1 ▪ Ideal for the removal of rounded, damaged or
corroded nuts, bolts, oil drain plugs, marine nuts
Ratchet
Socket and bolts, exhaust manifold nuts, pipe nozzle,
Screw
and studs
▪ No need for pounding, chisels or torches

D1 D2 L g
KT NO. mm mm mm mm
9TD401-06M 6 24.5 21 60.0 150.0 10 / 180

l
9TD401-08M 8 24.5 21 60.0 150.0 10 / 180
9TD401-10M 10 27.5 21 69.5 190.0 12 / 120 KT NO. D1 D2 ℓ L g
mm mm mm mm
9TD401-12M 12 27.5 21 69.5 190.0 12 / 120
9TD403-10M 16 22 8 50 70 10 / 180

9TD014MR 1/2" 9TD403-12M

9TD403-13M
18.0
20.0
22
22
11
11
50
50
77
84
10 / 180
10 / 180
▪ Roller stud extractor socket set
▪ Supplied in a box 4 9TD403-14M 21.0 22 11 50 85 10 / 180
PC. 9TD403-17M 24.5 25 15 50 117 10 / 180
9TD403-19M 27.0 27 15 50 135 8 / 80
9TD403-21M 29.4 27 16 50 138 8 / 80
9TD403-22M 30.5 27 17 50 140 8 / 80
9TD403-23M 31.8 27 17 50 136 8 / 80
9TD403-27M 36.0 27 18 50 146 6 / 120

9TD 1/2"

4
Kg PC.
Contents 1.10 1 / 20 9TD034MR

9TD401 M6, M8, M10, M12

5
PC.
9TD035MR

6
9TD036MR PC.

Kg
KT NO. Contents

21, 22, 23
9TD034MR 0.58
27
8740705
12, 13,
9TD035MR 0.52 4/36
9TD403 14, 17, 19

10, 12, 13
9TD036MR 0.60
14, 17, 19 8740706

C a n’ t b e u s e d w it h
pne u m a t ic w re nc h

172
Axial Lock Nut Socket
• Material - chrome vanadium steel
• Finishing - phosphate sunk

44K9M 1/2"
▪ Specially for SKF bearing
S

Ød1 H D1 D2

H S D1 D2 Ød1 L g
KT NO. Designation mm mm mm mm mm mm mm
44K928M TMFS 3 28 24.4 3.8 36 30 30 90 382 1 / 24
44K932M TMFS 4 32 28.4 3.8 38 30 34 90 378 1 / 24
44K938M TMFS 5 38 34.4 4.8 46 30 40 90 559 1 / 24

Bit Socket
• Socket made by chrome vanadium alloy steel
• Bit made by silicon alloy steel (S2)
KT No. & D1
• Polished, chrome plated
In order to get normal life of bit socket,
always use within limited torque to bit.

4021 1/2" 4025 1/2"

▪ Phillips head ▪ Hexagon head
▪ DIN ISO 8764-1 ▪ DIN 7422

Overall length g Overall length

KT NO. KT NO. g
No. mm mm / Inch mm
402102 PH2 60 77 10 / 180 402503 H3 60 68 10 / 180
402103 PH3 60 77 10 / 180 402504 H4 60 68 10 / 180
402104 PH4 60 77 10 / 180 402505 H5 60 70 10 / 180
402506 H6 60 72 10 / 180
4022 1/2" 402507
402508
H7
H8
60
60
75
75
10 / 180
10 / 180
▪ Slotted head 402509 H9 60 79 10 / 180
▪ DIN ISO 5264/3120 402510 H10 60 85 10 / 180
402512 H12 60 117 10 / 180
402514 H14 60 120 10 / 180
Tip width Tip thickness Overall length g
KT NO. 402517 H17 66 153 10 / 100
mm mm mm
402519 H19 66 225 10 / 120
402208 8 1.2 60 77 10 / 180
402506S 3/16 60 66 10 / 180
402210 10 1.6 60 83 10 / 180
402507S 7/32 60 68 10 / 180
402212 12 2.0 60 110 10 / 180
402508S 1/4 60 69 10 / 180
402214 14 2.5 60 112 10 / 180
402509S 9/32 60 70 10 / 180
402216 16 2.5 60 113 10 / 180
402510S 5/16 60 74 10 / 180
402512S 3/8 60 83 10 / 180
40D5 1/2" 402514S 7/16 60 100 10 / 180
▪ Hexagon head 402516S 1/2 60 110 10 / 180
▪ DIN 7422 402518S 9/16 66 157 12 / 120
402520S 5/8 66 162 12 / 120
402524S 3/4 66 225 10 / 120
Overall length
KT NO. g
mm mm
40D506 H6 140 102 6 / 120
40D508 H8 140 104 6 / 120
40D510 H10 140 133 6 / 120

173
 Bit Socket
• Socket made by chrome vanadium alloy steel
KT No. & D1
• Bit made by silicon alloy steel (S2) In order to get normal life of bit socket,
• Polished, chrome plated always use within limited torque to bit.

4035 1/2" 4026 4036 1/2"

▪ Hexagon head
▪ DIN 7422
4046 4066
▪ Spline head
KT NO. Overall length g ▪ DIN 3120 4026
mm mm
403504 H4 80 90 6 / 120
403505 H5 80 90 6 / 120 4036
403506 H6 80 90 6 / 120
403507 H7 80 90 6 / 120
4066
403508 H8 80 93 6 / 120
403509 H9 80 97 6 / 120 Overall length
403510 H10 80 107 6 / 120 KT NO. g
Size mm
403511 H11 80 140 6 / 120 402605 M5 60 70 10 / 180
403512 H12 80 145 6 / 120 402606 M6 60 72 10 / 180
403514 H14 80 145 6 / 120 402608 M8 60 73 10 / 180
403517 H17 80 200 6 / 120 402610 M10 60 85 10 / 180
403519 H19 80 245 6 / 96 402612 M12 60 113 10 / 180
402614 M14 60 117 10 / 180
403605 M5 80 74 6 / 120
40D0 1/2" 403606 M6 80 85 6 / 120
403608 M8 80 90 6 / 120
▪ Hexagon with ball point head
403610 M10 80 107 6 / 120
403612 M12 80 142 6 / 120
403614 M14 80 134 6 / 120
Overall length
KT NO. g
404605 M5 100 82 6 / 120
mm mm
404607 M7 100 84 6 / 120
40D006 H6 140 101 6 / 120
404608 M8 100 85 6 / 120
40D008 H8 140 103 6 / 120
404610 M10 100 113 6 / 120
40D010 H10 140 132 6 / 120
404612 M12 100 138 6 / 120
404614 M14 100 170 6 / 120
406608 M8 140 109 6 / 120
406609 M9 140 138 6 / 120
406610 M10 140 138 6 / 120
406612 M12 140 175 6 / 120
406614 M14 140 213 6 / 120
406616 M16 140 301 6 / 72

404108 1/2"
▪ Spline head
▪ DIN 3120
▪ Use for Toyota Tercel cylinder
head bolt

Overall length
KT NO. g
Size mm
404108 M8.9 100 129 6 / 120

402A 1/2"
▪ Pentagon head
▪ For using on most vehicles
fitting brake system

Overall length g
KT NO. Size mm
402A10 10 60 85 10 / 180

174
Bit Socket
• Socket made by chrome vanadium alloy steel
KT No. & D1
• Bit made by silicon alloy steel (S2) In order to get normal life of bit socket,
• Polished, chrome plated always use within limited torque to bit.

402B 1/2" 4027 4037 1/2"

▪ Spline head ▪ For tamper resistant
▪ Tamper resistant type torx screw
▪ For gearbox and sump ▪ DIN 3120
plugs of Audi A4/A6/A3, 4027
Golf IV/LT of VW
Overall length
KT NO. g
Size mm
402B16 M16 66 150 10 / 120
402B18 M18 66 201 10 / 120 4037
Overall length
KT NO. g
Size mm
402720 T20H 60 72 10 / 180
4023 4033 1/2" 402725
402727
T25H
T27H
60
60
72
72
10 / 180
10 / 180
▪ For torx internal screw 402730 T30H 60 75 10 / 180
▪ DIN 3120 402740 T40H 60 75 10 / 180
402745 T45H 60 80 10 / 180
402750 T50H 60 82 10 / 180
4023 402755 T55H 60 85 10 / 180
402760 T60H 60 115 10 / 180
403720 T20H 80 78 6 / 120
403725 T25H 80 79 6 / 120
403727 T27H 80 80 6 / 120
4033 403730 T30H 80 80 6 / 120
Overall length 403740 T40H 80 81 6 / 120
KT NO. g
Size mm
403745 T45H 80 81 6 / 120
402320 T20 60 72 10 / 180
403750 T50H 80 82 6 / 120
402325 T25 60 72 10 / 180
403755 T55H 80 99 6 / 120
402327 T27 60 72 10 / 180
403760 T60H 80 134 6 / 120
402330 T30 60 75 10 / 180
402340
402345
T40
T45
60
60
75
80
10 / 180
10 / 180
4049 1/2"
402350 T50 60 82 10 / 180 ▪ Use for VW, Audi, Fiat cylinder head
402355 T55 60 85 10 / 180 bolt
402360 T60 60 115 10 / 180
402370 T70 60 116 10 / 180
403320 T20 80 78 6 / 120
403325 T25 80 79 6 / 120
403327 T27 80 80 6 / 120
403330 T30 80 80 6 / 120
403340 T40 80 81 6 / 120
403345 T45 80 81 6 / 120
403350 T50 80 82 6 / 120
403355 T55 80 99 6 / 120 Overall length
KT NO. g
403360 T60 80 134 6 / 120 Size mm
403370 T70 80 143 6 / 120 404904 M4 100 94 6 / 120
404905 M5 100 95 6 / 120
404906 M6 100 96 6 / 120
404907 M7 100 97 6 / 120
404908 M8 100 98 6 / 120
404909 M9 100 100 6 / 120
404910 M10 100 106 6 / 120
404925 M10.5 100 110 6 / 120
404912 M12 100 132 6 / 120
404913 M13 100 162 6 / 120
404914 M14 100 164 6 / 120
404916 M16 100 166 6 / 120

175
 Ratchet
• Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

4725 FINE
GEAR 1/2"
▪ Reversible ratchet
▪ 8° gear action degree(45 teeth)
▪ DIN 3122 4725-10FR
Overall length g
4725-12FR
KT NO. inch mm
4725-10FR 10 250 573 2 / 40
4725-10GR 10 250 617 1 / 20 4725-10GR
4725-12FR 12 300 642 2 / 40 4725-12GR
4 725DK
4725-12GR 12 300 762 1 / 20
4725-12BR 12 300 644 2 / 40 4725-12BR
4725DKR01 renewal kits - -

4755 FINE
GEAR 1/2"
▪ Reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN 3122

Overall length
KT NO. g
inch mm
4755-10G 10 250 542 1 / 20 4755DK
4755DK renewal kits - 1 / 20 4755-10G

4756
FINE
GEAR 1/2"
▪ Quick release reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ DIN 3122

Overall length
KT NO. g
inch mm
4756-10G 10 250 572 1 / 20 4756DK
4756DK renewal kits - 1 / 20 quick release 4756-10G

4752 FINE
GEAR 1/2"
▪ Quick release flexible and reversible ratchet
▪ 5° gear action degree (72 teeth)
▪ Multi-angle design for difficult-to-reach
fasteners

Overall length
KT NO. g
inch mm
4752-12P
4752-12P 12 300 668 1 / 20
4752-12G 12 300 635 1 / 20
4752DK renewal kits - - 4752DK 4752-12G
quick release

176
Ratchet Set

9415GR 1/4" + 3/8" + 1/2"

Paper display stand size (mm):
405 x 310 x 80 (0.36 cuft)

15
kg
PC.
Contents 5.9 1/2

2752-06G x 5

3752-09G x 5

4752-12G x 5

Ratchet • Material
- chrome vanadium alloy steel handle
• Finishing
- polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk
KT No. & D1

4760 FINE
GEAR
MINI
RATCHET 1/2"
▪▪Mini reversible ratchet
▪▪6° gear action degree (64 teeth)
▪▪Two teeth pawl action
▪▪DIN3122
Overall length 4760-05
KT NO. g
inch mm
4760-05 4-3/4 120 222 5 / 90
4760-05G 5-1/2 140 210 4 / 72 4760DK
4760DK renewal kits - -
4760-05G

4762 1/2"
▪▪Quick release reversible ratchet
▪▪11° gear action degree (32 teeth)
▪▪Two teeth pawl action
▪▪DIN3122
Overall length
KT NO. g
inch mm
4762-10G / 4762-15G
4762-10G 10 250 532 5 / 30
4762-10F 10 250 590 6 / 36
4762-10P 10 250 563 6 / 36
4762-10F / 4762-15F
4762-15G 15 375 690 5 / 20
4762-15F 15 375 750 6 / 24
4762-15P 15 375 728 6 / 24
4762DK 4762-10P / 4762-15P
4762DK renewal kits - -

4767 1/2"
▪▪Reversible ratchet
(19 mm socket included)
▪▪11° gear action degree (32 teeth)
▪▪Two teeth pawl action
19mm 12 point
Overall length
KT NO. g
inch mm
4767-10F 10 250 563 6 / 36
4767DK renewal kits - -
4267DK

177
 Ratchet • Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

4768 1/2"
▪ Reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length
KT NO. g
inch mm
4768-10G 10 250 541 5 / 25 4768-10G / 4768-15G
4768-10F 10 250 589 6 / 36
4768-10P 10 250 562 6 / 36
4768-10F / 4768-15F
4768-15G 15 375 720 5 / 20
4768DK
4768-15F 15 375 776 6 / 24
4768-15P 15 375 734 6 / 24
4768-10P / 4768-15P
4768DK renewal kits - -

4771 1/2"
▪ Quick release reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
4771-10BR
▪ DIN 3122
Overall length
KT NO. g
inch mm
4771-10FR
4771-10BR 10 250 624 2 / 40
4771-10FR 10 250 659 2 / 40
4771-10GR 10 250 548 1 / 20 4771DK
4771DK renewal kits - - 4771-10GR

Ultra-Light Aluminium Ratchet

• Material • Finishing
- Aluminum Alloy - anodic treatment
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

4772 1/2"
▪ Design spec. similar to DIN 3122, ISO 3315
▪ Made from special-purpose drop-forged and
-40%
weight
hardened aluminium
▪ The mechanism as in all 4771/9 ratchets is made
from high-quality steel

Overall length 4772-10G

KT NO. g
inch mm
4772-10G 10 250 336 1 / 25 4772DK01
4772-10F 10 250 353 1 / 25 4772-10F

4772DK01 renewal kits - -

4772-10GS 10 250 336 1 / 25
4772-10FS 10 250 353 1 / 25
4772DK push renewal kits - -
4772-10GS

4772-10FS

4772DK

178
Ratchet • Material
- chrome vanadium alloy steel handle
• Finishing
- polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk KT No. & D1

4779 1/2"
▪ Reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action 4779-10BR
▪ DIN 3122
Overall length
KT NO. g
inch mm 4779-10FR
4779-10BR 10 250 590 2 / 40
4779-10FR 10 250 615 2 / 40
4779-10GR 10 250 555 1 / 20 4779DK01
4779DK01 renewal kits - - 4779-10GR

4781 1/2"
▪ Quick release flexible and reversible ratchet
▪ 11° gear action degree (32 teeth)
▪ Two teeth pawl action
▪ DIN 3122
Overall length
KT NO. g 4781-12F
inch mm
4781-12F 12 300 792 1 / 20
4781-12P 12 300 758 1 / 20
4781-12P
4781DK renewal kits - - 4781DK

Accessory • Material - chrome vanadium alloy steel

• Finishing - polished, chrome plated

4121 1/2"
▪ Adjustable handle
▪ Push-Lock design
Overall length
KT NO. g
inch mm
4121-11GR 11-1/2 295 544 1 / 20

Extension Bar & Set

4251 1/2"
▪ Extension bar
▪ DIN 3123
Overall length
KT NO. g KT No. & D1
inch mm
4251-02R 2 55 98 12 / 216
4251-03R 3 75 138 6 / 120
4251-04R 4 100 163 4 / 80
4251-05R 5 125 192 4 / 80
4251-06R 6 150 230 4 / 64
4251-08R 8 200 270 4 / 80
4251-10R 10 250 433 4 / 64

4104PR 1/2"
▪ Extension bar
4
PC.

Kg 0.84 1 / 25
Contents

4251 3" 5" 6" 10"

179
 Accessory • Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated

4221 1/2"
▪ Extension bar
▪ DIN 3123

Overall length
KT NO. g
inch mm
4221-18 18 450 550 1 / 20
4221-24 24 600 685 1 / 20
4221-30 30 750 860 1 / 20
4221-36 36 900 1030 1 / 20

Accessory • Material - chrome vanadium alloy steel

• Finishing - polished, chrome plated

4223 1/2" 4311 1/2"

T h e o f f s e t e x t e ns io n b a r h a s l e s s s t re ngt h
▪ Speed brace
t h a n no rm a l e x t e ns io n b a r. Do no t u s e a s a
no rm a l e x t e ns io n b a r. ▪ DIN 3122

▪ Offset extension bar KT No. & D1

▪ Max. torque:320 Nm 4311-16F
▪ DIN 3123

4311-16G
Overall length
KT NO. g
inch mm

Overall length 4311-16F 16-1/4 412 545 5 / 40

KT NO. g
inch mm 4311-16G 16-1/4 412 545 5 / 40
4223-02R 2 55 94 12 / 216
4223-05R 5 125 198 4 / 80
4223-10R 10 250 357 4 / 64

4452 1/2"
4293 1/2"
▪ Flexible handle
▪ Multi-function of extension bar and offset ▪ Action degree -180°
extension bar KT No. & D1
▪ DIN 3122
▪ Max. torque:320 Nm KT No. & D1 4452DK
▪ DIN 3123

Overall length
KT NO. g
inch mm
4452-15FR 15 375 720 2 / 24
4452-18FR 18 450 828 2 / 20
4452-24FR 24 600 1165 1 / 20
Overall length
KT NO. g 4452DK renewal kits(for 15F/18F) 62 250 / 250
inch mm
4452DK1 renewal kits(for 24F)
4293-02 2 55 55 12 / 216
4293-05 5 125 200 4 / 80
4293-10 10 250 420 4 / 64

180
Accessory • Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated

4453 1/2" 4573 1/2"

▪ Flexible handle ▪ Sliding T-handle
▪ Action degree -180° ▪ DIN 3120
KT No. & D1 KT No. & D1
▪ New pattern design added in firm
and powerful elements
▪ New forge technologies I-Beam
shank offer 15% lightweight 4573DK
▪ DIN 3122
4452DK
4453-15F
Overall length
4453-18F KT NO. g
inch mm

Overall length 4573-10R 10 250 497 2 / 40

KT NO. g
inch mm 4573DK renewal kits - -
4453-15F 15 375 600 2 / 24
4453-18F 18 450 700 2 / 20
4452DK renewal kits(for 15F/18F) 62 250 / 250 4581 1/2"
▪ 90° L-handle
▪ DIN 3122

4462 1/2" KT No. & D1

▪ Flexible handle
▪ Action degree -180°
▪ DIN 3122 KT No. & D1
Overall length
KT NO. g
inch mm
4462DK
4581-10 10 250 429 1 / 40

Overall length
KT NO. g
inch mm
4462-18F 18 463 1046 1 / 20 4583 1/2"
4462-24F 24 613 1350 1 / 20 ▪ 105° L-handle
4462DK renewal kits - - ▪ DIN 3120
KT No. & D1

4572 1/2"
▪ Sliding T-handle
▪ DIN 3122
KT No. & D1
4572DK Overall length
KT NO. g
inch mm
4583-12R 12-1/2 315 545 1 / 40
Overall length
KT NO. g
inch mm
4572-10
4572-12
10
12
250
300
370
433
2 / 40
2 / 40
4584 1/2"
4572DK renewal kits - - ▪ 90° L-handle
▪ DIN 3120
KT No. & D1

Overall length
KT NO. g
inch mm
4584-12R 12 300 550 1 / 40

181
 Accessory • Material - chrome vanadium alloy steel
• Finishing - polished, chrome plated

4791R 1/2" 4813 4816 1/2"

▪ Univesal joint ▪ Adapter
▪ DIN 3120, ISO 3316 ▪ Convert to 3/8" drive or 3/4" drive
KT No. & D1 ▪ 4813 →Max. torque:263 Nm KT No. & D1
▪ DIN 3123, ISO 3316

77.5 1/2" drive(M)

Overall length
KT NO. g
inch mm
4813 4816
4791R 3 77.5 163 5 / 100 3/8" drive(M) 3/4" drive(M)

g
KT NO. Spec.

4813 1/2"Fx3/8"M 61 10 / 200

4794 1/2" 4816 1/2"Fx3/4"M 114 10 / 200
▪ Univesal joint
▪ 30° rotation 4148 1/2"
▪ Short pattern design enables KT No. & D1
greater access in confined spaces ▪ Bit holder

Ø 25
KT No. & D1
30°

60

Overall length
KT NO. g
inch mm Overall length g
KT NO. Size mm
4794 2-3/8 60 106 5 / 180
414808S 1/4" 38 50 10 / 200
414810S 5/16" 38 60 10 / 200
414810M 10 mm 38 65 10 / 200

Socket Rail Set

4010MR 4010SR 4510MR 4510SR 1/2"
▪ Socket rail 230mmL

8
PC.

4010SR/4510SR 4010MR/4510MR

Kg
KT NO. Contents 0.64 40

4010MR 4330MR
10, 12, 13, 14, 17, 19, 21, 22
4510MR 4335MR
8740908
4010SR 4330SR
3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8
4510SR 4335SR

182
Socket Rail Set
4106PR 1/2" 4311MR 1/2"
▪ Socket rail 230mmL ▪ Socket rail 230mmL
6
PC. 11
PC.

kg
Contents 0.51 40

4375M E10, E12, E14, E16, E18, E20

8740906

4208MR10 1/2"
kg
Contents 0.92 12
▪ Socket rail 240mmL
8
PC. 4335MR 10, 11, 13, 14, 15, 17, 18, 19

4725-10GR 4572-10

4251-05 8740908

kg
Contents 1.22 14

4230M 12, 13, 14, 17, 19, 21, 22, 23

8741108 Bit Socket Rail Set

4110PR10 1/2"
4308MR10 1/2" ▪ Socket rail 240mmL
▪ Socket rail 240mmL 9
8 PC.
PC.

kg
Contents 0.77 14
kg
Contents 1.22 14 H3, H4, H5, H6, H7, H8, H10, H12,
4025
H14
4235M 12, 13, 14, 17, 19, 21, 22, 23
8741009
8741108

4110SR10 1/2"
4118MR 1/2"
▪ Socket rail 240mmL
▪ Socket rail 230mmL
8 9
PC. PC.

kg
kg Contents 1.22 14
Contents 0.57 40
RB8, RB9.5, RB10, RB10.5, RB12, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8,
4014M 4025S
RB12.7, RB13.5, RB19 1/2, 9/16, 5/8

8740908 8741009

183
 Bit Socket Rail Set
4120PR10 1/2" 4136PR 1/2"
▪ Socket rail 240mmL ▪ Socket rail 127mmL
9
PC. 4
PC.

kg
Contents 1.0 14
H4, H5, H6, H7, H8, H10, H12,
4035
H14, H17
kg
Contents 0.46 30
8741009
4036 M6, M8, M10, M12
4108PR10 1/2" 8740504

▪ Socket rail 240mmL

8
PC. 4109PR10 1/2"
▪ Socket rail 240mmL
9
PC.
kg
Contents 0.96 14
H6, H7, H8, H10, H12, H14, H17, Contents
kg
0.74 14
4025
H19
8741009 T20, T25, T27, T30, T40, T45, T50,
4023
T55, T60
8741009
4126PR 1/2"
▪ Socket rail 127mmL
4 4119PR10 1/2"
PC. ▪ Socket rail 240mmL
9
PC.

kg
Contents 0.38 50
kg
Contents 0.84 14
4026 M6, M8, M10, M12
T20, T25, T27, T30, T40, T45, T50,
8740504 4033
T55, T60
8741009
4105PR 1/2"
▪ Socket rail 150mmL 4116PR 1/2"
5 ▪ Socket rail 180mmL
PC.
6
PC.

kg
Contents 0.57 50
kg 20
4026 M8, M10, M12, M14 Contents 0.38

402B M16 4049 M9, M10, M12, M13, M14, M16

8740605 8740706

184
Bit Socket Rail Set
874 1/2"
▪ Rail length from 160 mm to 560 mm
L
KT NO. (mm)

870406 160
• Customer Selected
870410 260
870422 560
8740 -

Socket Set
4208MR 4208SR 4308MR 1/2"
Metal case size (mm) :
246 x 103 x 38 (0.034 cuft)

8
PC.

4208MR / 4308MR 4208SR

Kg 1.93 1 / 12
KT NO. Contents

4208MR
4230M
12, 13, 14, 17, 19, 21, 22, 23
4308MR
4235M

4208SR 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16

4230S

4215MR 1/2" 4216MR 1/2"

Metal case size (mm) : Metal case size (mm) :
445 x 135 x 50 (0.107 cuft) 445 x 135 x 50 (0.107 cuft)
15 16
PC. PC.

Kg 3.80 1/6 Kg 3.68 1/6

Contents Contents
10, 11, 12, 13, 14, 15, 16, 17, 19, 10, 11, 12, 13, 14, 15, 16, 17, 18,
4230M 4230M
21, 22, 24, 27, 30, 32 19, 21, 22, 24, 27, 30, 32

185
 Socket Set
4315MR 1/2" 4316MR 1/2"
Metal case size (mm) : Metal case size (mm) :
445 x 135 x 50 (0.107 cuft) 445 x 135 x 50 (0.107 cuft)
15 16
PC. PC.

Kg 3.80 1/6
Contents Kg 3.68 1/6
Contents

10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 10, 11, 12, 13, 14, 15, 16, 17, 18,
24, 27, 30, 32 4235M
4235M 19, 21, 22, 24, 27, 30, 32

Bit Socket Set

4109PR 4119PR 1/2"
Metal case size (mm) :
198 x 105 x 32 (0.023 cuft)
9
PC.

4109PR 4119PR
KT NO. Contents

Kg 1.04 1 / 20
4109PR
4023
T20, T25, T27, T30, T40, T45, T50, T55, T60
4119PR Kg 1.13 1 / 20
4033

4110PR 4120PR 1/2"

Metal case size (mm) :
198 x 105 x 32 (0.023 cuft)
9
PC.

4110PR 4120PR
KT NO. Contents

Kg 1.03 1 / 20
4110PR H3, H4, H5, H6, H7, H8, H10, H12, H14
4025

4120PR H4, H5, H6, H7, H8, H10, H12, H14, H17 Kg 1.38 1 / 20
4035

186
Bit Socket Set
4117PR 1/2" 4128PR 1/2"
Metal case size (mm) : Metal case size (mm) :
244 x 94 x 40 (0.033 cuft) 244 x 94 x 40 (0.038 cuft)
7 8
PC. PC.

Kg 1.22 1/8 Kg 1.24 1/8

Contents Contents

4026 M6, M8, M10, M12, M14 4026 M5, M6, M8, M10

402B M16, M18 402B M16

4036 M8, M10, M12

Socket Set
4501MR 1/2"
Metal case size (mm) :
392 x 90 x 50 (0.062 cuft)
Kg 3.40 1/6
Contents
15
8, 10, 11, 12, 13, 14, 17, 19, 21, PC.
4335MR
22, 24, 27
4779-10FR 4251-05R

4452-15FR

4511MR 4511SR 1/2"

Metal case size (mm) :
445 x 187 x 50 (0.147 cuft)

24
PC.

4511MR 4511SR

Kg
KT NO. Contents 5.5 1/4

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
4511MR 463521R 4725-12GR 4223-02R
4335MR 21, 22, 23, 24, 27, 30, 32

3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 5/8, 4251-05R

4511SR 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1, 4251-10R 4572-10
4335SR 1-1/16, 1-1/8, 1-3/16, 1-1/4

187
 Socket Set
4012MR 4012SR 4512MR 4512SR 1/2"
Metal case size (mm) :
445x 135 x 50 (0.106 cuft)

14
PC.

4012MR / 4512MR 4012SR / 4512SR

Kg 3.50 1/6
KT NO. Contents

4012MR
4330MR 463021R
10, 11, 12, 13, 14, 17, 19, 21, 22, 24 4768-10F
4512MR
4335MR 463521R
4572-12
4012SR
4330SR 3/8, 7/16, 15/32, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, 463021R
15/16
4251-05R
4512SR
4335SR 463521R

4016SR 4516MR 4516SR 1/2"

Metal case size (mm) :
370 x 150 x 54 ( 0.105 cuft) 16
PC.

4016SR / 4516SR 4516MR

Kg 3.68 1/6
KT NO. Contents

3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,

4016SR
13/16, 7/8, 15/16, 1-1/16 463021R
4330SR 4791R 4779-10FR

4516MR 10, 11, 12, 13, 14, 17, 19, 21, 23, 24, 27
4335MR 463521R 4251-05R

3/8, 7/16, 15/32, 1/2, 9/16, 5/8, 3/4,

4516SR
13/16, 15/16, 1, 1-1/16 463521R 4452-15FR
4335SR

188
Socket Set
4220MR 4320MR 1/2"
Metal case size (mm) :
445 x 135 x 50 (0.106 cuft)

20
PC.

Kg
KT NO. Contents 3.83 1/6

4220MR
4330MR 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 4251-05R
21, 22, 24, 27 4755-10G 4251-10R 4791R
4320MR
4335MR

4325MR 1/2"
Metal case size (mm) :
445 x 187 x 50 (0.147 cuft)

Kg 5.01 1/4
Contents 24
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, PC.
4335MR
20, 21, 22, 23, 24, 27, 30, 32
4251-05R
4779-10GR 4791R
4251-10R

4311-16G 4572-10

4030CR 4030CR01 4530CR 4530CR01 1/2"

Metal case size (mm) :
445 x 187 x 50 (0.147 cuft) 30
PC.

4030CR / 4530CR 4030CR01 / 4530CR01

KT NO. Contents 1/4

Kg 4.90
4030CR
4330MR 4768-10P
4452-15FR

4030CR01 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, Kg 4.92
4330SR 22, 23, 24, 30, 32 4779-10GR 4251-05R
7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
4530CR 7/8, 15/16, 1 4791R
Kg 4.90
4335MR 4768-10P

4530CR01 Kg 4.92
4813
4335SR 4779-10GR

189
 Socket Set
4024MR 4024SR 4524MR 4524SR
4033MR 4033SR 4533MR 4533SR 1/2"
Metal case size (mm) :
445 x 187 x 50 (0.147 cuft) 24
PC.

4024SR / 4524SR 4024MR / 4524MR 4033SR / 4533SR 4033MR / 4533MR

Kg 5.7 1/4
KT NO. Contents

4033SR 4330SR 5/16, 3/8, 7/16, 15/32, 1/2,

9/16, 19/32, 5/8, 11/16, 3/4, 463021R
25/32, 13/16, 7/8, 15/16, 1,
4533SR 4335SR 1-1/16, 1-3/16, 1-1/4
463521R
4779-10BR
4121-11GR
4033MR 4330MR 10, 11, 12, 13, 14, 15, 16, 17, 463021R
18, 19, 20, 21, 22, 23, 24, 27,
4533MR 4335MR 30, 32
463521R 4223-02R

4024SR 4330SR 3/8, 7/16, 15/32, 1/2, 9/16,

19/32, 5/8, 11/16, 3/4, 25/32, 463021R
4573-10
13/16, 7/8, 15/16, 1, 1-1/16,
4524SR 4335SR 1-1/8, 1-3/16, 1-1/4
463521R
4725-12BR 4583-12R
4024MR 4330MR 10, 11, 12, 13, 14, 15, 16, 17, 463021R
18, 19, 20, 21, 22, 23, 24, 27,
4524MR 4335MR 30, 32
463521R

4523MRV01 EVA Tray #8 1/2"

Plastic case size (mm) :
389 x 230 x 66 (0.208 Cuft) 23
PC.

kg 3.88 1/6
Contents

8, 9, 10, 11, 12, 13, 14, 15, 16,

4335MR 17, 18, 19, 21, 22, 24, 27, 30,
32

4771-10GR 4791R

4572-10 4251-05R
4251-10R

190
Socket Set
4526MR15 1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 Cuft) 24
PC.

Kg
Contents 5.05 1/4

8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
21, 22, 23, 24, 27, 30, 32
4335MR

4779-10FR 4572-12

4251-05R
4452-15FR
4251-10R

4791R

191
 Socket Set
4026MR 4026SR 4526MR 4526SR
4026MR03 4026SR03 4526MR03 4526SR03
4026MR04 4526MR04 1/2"
Metal case size (mm) :
445 x 187 x 50 (0.147 cuft)

24
PC.

4026MR / 4526MR 4026SR / 4526SR

4026SR03 / 4526SR03 4026MR03 / 4526MR03 4026MR04 / 4526MR04

Kg 5.95 1/4
KT NO. Contents

4026MR
4330MR 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 463021R
20, 21, 22, 23, 24, 27, 30, 32 4768-10F
4526MR
463521R
4335MR

4026MR03
4330MR
4779-10GR
4526MR03
4335MR 4452-15FR
8, 10, 11, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 27, 30, 32 4791R
4026MR04
4572-12
4330MR
4755-10G
4526MR04 4251-05R
4335MR 4251-10R

4026SR
4330SR 463021R
4768-10F
4526SR
4335SR 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 463521R
19/32, 5/8, 11/16, 3/4, 25/32, 13/16,
7/8, 15/16, 1, 1-1/16, 1-3/16, 1-1/4
4026SR03
4330SR
4779-10GR
4791R
4526SR03
4330MR

192
Socket Set
4028MR 4028SR 4528MR 4528SR
4028MR02 4528MR02 1/2"
Metal case size (mm) :
445x 187 x 50 (0.147 cuft) 24
PC.

4028MR / 4528MR 4028MR02 / 4528MR02 4028SR / 4528SR

Kg 5.3 1/4
KT NO. Contents

4028MR
4330MR 463021R
4779-10GR
4528MR
4335MR 10, 11, 12, 13, 14, 15, 16, 17, 18, 463521R 4791R
19, 20, 21, 22, 23, 24, 27, 30, 32
4028MR02
4330MR 463021R
4251-05R
4755-10G 4251-10R
4528MR02
4335MR 463521R

4028SR 3/8, 7/16, 15/32, 1/2, 9/16, 4572-10

4330SR 19/32, 5/8, 11/16, 3/4, 25/32, 463021R
13/16, 7/8, 15/16, 1, 1-1/16,
4528SR 1-1/8, 1-3/16, 1-1/4 4779-10GR
4335SR 463521R

4032MR 4032SR 4532MR 4532SR 1/2"

Metal case size (mm) :
445x 187 x 50 (0.147 cuft)
24
PC.

4032MR / 4532MR 4032SR / 4532SR

Kg
KT NO. Contents 5.6 1/4

4032MR
4330MR 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 463021R
20, 21, 22, 23, 24, 27, 30, 32
4532MR 4251-05R
4779-10FR 4251-10R
4335MR 463521R

4032SR 4452-15FR 4791R

4330SR 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 463021R
19/32, 5/8, 11/16, 3/4, 25/32, 13/16,
7/8, 15/16, 1, 1-1/16, 1-3/16, 1-1/4
4532SR
4335SR 463521R

193
 Socket Set
4034MR 4534MR 1/2"
Metal case size (mm) :
476 x 282 x 57 (0.147 cuft)
33
PC.

4034MR / 4534MR

Kg
KT NO. Contents 8.2 1/2

4034MR 463516R 4791R 4572-12

4330MR 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 463021R
18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 28, 29, 30, 32 4452-18FR 4251-03R
4534MR 4251-05R 4779-10FR
4335MR 463521R 4251-10R

4035MR 4535MR 1/2"

Metal case size (mm) :
445 x 187 x 50 (0.147 Cuft) 35
PC.

4535MR / 4035MR
Kg
KT NO. Contents 4.46 1/4

H5, H6, H7, H8, H10, H12

463016R
1836H
4035MR T25, T27, T30, T40, T45, T50
4330MR 1836T
10, 11, 12, 13, 463014RC
14, 15, 17, 19, PH2, PH3
21, 22, 24, 27, 1836P
30, 32
463516R
4535MR 4251-05R 4771-10GR
4251-10R 4794 414810S
4335MR
463514RC

194
Socket Set
4042CR 4042CR02 4542CR 4542CR02 1/2"
Metal case size (mm) :
476x 282 x 57 (0.27 cuft) 42
PC.

4042CR / 4542CR 4042CR02 / 4542CR02

Kg 8.5 1/2
KT NO. Contents

4330MR
4042CR
463021R
4330SR 4768-10F
4452-18FR
4335MR
4542CR
10, 11, 12, 13, 14, 15, 16, 17, 18, 463521R
19, 20, 21, 22, 23, 24, 27, 30, 32
4335SR 5/16, 3/8, 7/16, 1/2, 9/16,
19/32, 5/8, 11/16, 3/4, 25/32, 4251-05R
13/16, 7/8, 15/16, 1, 1-1/16, 4251-10R
4330MR 1-1/8, 1-3/16, 1-1/4
4042CR02
4779-10GR
4330SR
4572-12
4335MR 4791R
4542CR02

4335SR

4044CR 4544CR 1/2"

Metal case size (mm) :
476 x 282 x 57 (0.27 cuft) 43
PC.

Kg
KT NO. Contents 8.5 1/2

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28, 30, 32
4330MR 4121-11GR
4044CR
4779-10BR
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,
4330SR 15/16, 1, 1-1/8, 1-3/16, 1-1/4

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 4223-02R 4583-12R
22, 23, 24, 25, 26, 27, 28, 30, 32
4335MR
4544CR
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 4573-10 4791R
4335SR 15/16, 1, 1-1/8, 1-3/16, 1-1/4

195
 Socket Set
41026MR 41026SR 41526MR 41526SR 1/2"
Plastic case size (mm) :
445x 240 x 206 (0.78 cuft)
25
PC.

41026MR / 41026SR 41526MR / 41526SR

Kg
KT NO. Contents 5.7 1

41026MR
4330MR 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 463021R
20, 21, 22, 23, 24, 27, 30, 32 4768-10F 4452-15FR
41526MR
4335MR 463521R

41026SR 4572-12
4330SR 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 463021R 4251-05R
19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 4251-10R
41526SR 7/8, 15/16, 1, 1-1/16, 1-3/16, 1-1/4 4791R
4335SR 463521R

Please wear proper safety gear while working.

4108FR 4111FR 4112FR 1/2"

Metal case size (mm) :
190 x 60 x 48 (0.019 cuft) 8 6 6
PC. PC. PC.
414810S

4112

4108FR 4111FR 4112FR

Kg
KT NO. Contents

4108FR 9, 11 PH2, PH3 1880P PH2, PH3 1.04

1836S 1836P 4112
4111FR 8, 10 PH2, PH3 1.00 1 / 24
1880S 1880P

4112FR 9, 11 PH2, PH3 414810S 1.00

1836S 1836P

4505MR 4505SR 1/2"

Metal case size (mm) :
246x 103 x 38 (0.034 cuft)
10
PC.

4505MR 4505SR
Kg
KT NO. Contents 1.56 1 / 12

4505MR 8, 10, 12, 14 9, 11

4335MR 1836S 4112

4505SR
4335SR
5/16, 3/8, 1/2, 9/16 1836P PH2, PH3 414810S

196
Standard Socket • Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

6330M 3/4" 6330S 3/4"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1
D2
D1

D2
D1
l l
L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
633017M 17 26.0 32.7 14 51 187 8 / 96 633022S 11/16 26 35.7 14 50.8 195 8 / 96
633019M 19 30.0 32.7 14 51 207 8 / 96 633024S 3/4 30 35.7 14 50.8 225 8 / 96
633021M 21 32.0 32.7 16 51 210 8 / 96 633026S 13/16 32 35.7 16 50.8 228 8 / 96
633022M 22 33.0 35.7 16 51 209 8 / 96 633028S 7/8 33 35.7 16 51.0 230 8 / 96
633023M 23 34.0 35.7 16 51 216 8 / 96 633030S 15/16 35 35.7 17 51.0 240 8 / 96
633024M 24 35.0 35.7 17 51 219 8 / 96 633032S 1 35 35.7 17 52.0 242 8 / 96
633026M 26 35.7 35.0 17 52 243 8 / 96 633034S 1-1/16 38 36.0 19 52.0 238 8 / 96
633027M 27 38.0 36.0 19 52 238 8 / 96 633036S 1-1/8 40 38.0 19 52.0 261 8 / 96
633028M 28 39.0 36.0 19 52 233 8 / 96 633038S 1-3/16 42 38.0 21 54.0 295 6 / 48
633029M 29 40.0 38.0 19 52 261 8 / 96 633040S 1-1/4 44 38.0 23 56.0 317 6 / 48
633030M 30 42.0 38.0 21 54 295 6 / 48 633042S 1-5/16 46 39.0 23 56.0 351 6 / 48
633032M 32 44.0 38.0 23 56 317 6 / 48 633044S 1-3/8 48 42.0 25 58.0 406 6 / 36
633033M 33 46.0 39.0 23 56 351 6 / 48 633046S 1-7/16 50 42.0 25 58.0 434 6 / 36
633034M 34 47.0 42.0 24 57 400 6 / 48 633048S 1-1/2 52 45.0 27 60.0 497 6 / 36
633035M 35 48.0 42.0 25 58 406 6 / 36 633050S 1-9/16 54 45.0 28 62.0 537 4 / 32
633036M 36 50.0 42.0 25 58 434 6 / 36 633052S 1-5/8 56 45.0 29 64.0 581 4 / 32
633038M 38 52.0 45.0 27 60 497 6 / 36 633054S 1-11/16 58 45.0 29 65.0 591 4 / 32
633041M 41 56.0 45.0 29 64 581 4 / 32 633056S 1-3/4 60 48.0 31 66.0 657 4 / 32
633042M 42 57.0 45.0 29 64 591 4 / 32 633058S 1-13/16 62 48.0 34 68.0 724 4 / 32
633046M 46 62.0 48.0 33 68 724 4 / 32 633060S 1-7/8 64 48.0 34 70.0 775 2 / 24
633048M 48 64.0 48.0 34 70 775 2 / 24 633062S 1-15/16 66 48.0 34 70.0 832 2 / 24
633050M 50 68.0 48.0 34 72 889 2 / 24 633064S 2 68 48.0 34 72.0 889 2 / 24
633054M 54 72.0 50.0 35 75 1070 1 / 20 633066S 2-1/16 70 50.0 35 74.0 950 1 / 20
633055M 55 74.0 50.0 37 76 1115 1 / 20 633068S 2-1/8 72 50.0 35 75.0 1020 1 / 20
633058M 58 77.0 50.0 37 78 905 1 / 20 633070S 2-3/16 74 50.0 37 76.0 1120 1 / 20
633060M 60 80.0 50.0 40 78 1250 1 / 20 633072S 2-1/4 76 50.0 37 76.0 1120 1 / 20
633063M 63 83.0 55.0 40 81 1445 1 / 12 633074S 2-5/16 78 50.0 37 78.0 1160 1 / 20
633065M 65 85.0 58.0 43 83 1565 1 / 12 633076S 2-3/8 80 50.0 40 78.0 1240 1 / 20
633070M 70 92.0 58.0 46 88 1875 1 / 12 633078S 2-7/16 82 55.0 40 81.0 1366 1 / 12
633080S 2-1/2 84 55.0 40 81.0 1460 1 / 12
633082S 2-9/16 85 58.0 43 83.0 1510 1 / 12
633084S 2-5/8 86 58.0 43 83.0 1510 1 / 12
633086S 2-11/16 90 58.0 43 85.0 1555 1 / 12
633088S 2-3/4 92 58.0 46 88.0 1865 1 / 12

197
 Standard Socket
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves
KT No. & D1

6335M 3/4"
▪ DIN 3124, ISO 2725-1

D2
D1
l
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
633517M 17 26.0 32.7 14 51 187 8 / 96 633541M 41 56.0 45.0 29 64 581 4 / 32
633518M 18 28.0 32.7 14 51 196 8 / 96 633542M 42 57.0 45.0 29 64 591 4 / 32
633519M 19 30.0 32.7 14 51 207 8 / 96 633543M 43 58.0 45.0 29 65 620 4 / 32
633520M 20 31.0 32.7 16 51 209 8 / 96 633544M 44 60.0 48.0 31 66 695 4 / 32
633521M 21 32.0 32.7 16 51 210 8 / 96 633545M 45 61.0 48.0 33 67 715 4 / 32
633522M 22 33.0 35.7 16 51 209 8 / 96 633546M 46 62.0 48.0 33 68 724 4 / 32
633523M 23 34.0 35.7 16 51 216 8 / 96 633547M 47 63.0 48.0 33 69 755 4 / 32
633524M 24 35.0 35.7 17 51 219 8 / 96 633548M 48 64.0 48.0 34 70 775 2 / 24
633525M 25 35.0 35.7 17 52 240 8 / 96 633549M 49 66.0 48.0 34 70 810 2 / 24
633526M 26 35.7 35.0 17 52 243 8 / 96 633550M 50 68.0 48.0 34 72 889 2 / 24
633527M 27 38.0 36.0 19 52 238 8 / 96 633551M 51 69.0 50.0 35 73 895 1 / 20
633528M 28 39.0 36.0 19 52 233 8 / 96 633552M 52 69.0 50.0 35 73 905 1 / 20
633529M 29 40.0 38.0 19 52 261 8 / 96 633553M 53 70.0 50.0 35 74 975 1 / 20
633530M 30 42.0 38.0 21 54 295 6 / 48 633554M 54 72.0 50.0 35 75 1010 1 / 20
633531M 31 43.0 38.0 23 55 305 6 / 48 633555M 55 74.0 50.0 37 76 1095 1 / 20
633532M 32 44.0 38.0 23 56 317 6 / 48 633556M 56 75.0 50.0 37 76 1145 1 / 20
633533M 33 46.0 39.0 23 56 351 6 / 48 633557M 57 76.0 50.0 37 76 1195 1 / 20
633534M 34 47.0 42.0 24 57 400 6 / 48 633558M 58 77.0 50.0 37 78 1225 1 / 20
633535M 35 48.0 42.0 25 58 406 6 / 36 633559M 59 78.0 50.0 37 78 1250 1 / 20
633536M 36 50.0 42.0 25 58 434 6 / 36 633560M 60 80.0 50.0 40 78 1275 1 / 20
633537M 37 51.0 45.0 25 59 485 6 / 36 633563M 63 83.0 55.0 40 81 1390 1 / 12
633538M 38 52.0 45.0 27 60 497 6 / 36 633565M 65 85.0 58.0 43 83 1510 1 / 12
633539M 39 53.0 45.0 28 61 520 4 / 32 633570M 70 92.0 58.0 46 88 1805 1 / 12
633540M 40 54.0 45.0 28 62 540 4 / 32

• Chrome vanadium alloy steel

Deep Socket • Polished, chrome plated

• 4 ball retaining grooves
KT No. & D1

6230M 3/4"
▪ DIN 3124, ISO 2725-1
D1

D2

l
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
623032M 32 44.0 38.0 34 90 580 1 / 24 623041M 41 56.0 45.0 41 90 864 1 / 24
623033M 33 46.0 39.0 34 90 646 1 / 24 623046M 46 62.0 48.0 46 95 1093 1 / 10
623036M 36 50.0 42.0 37 90 724 1 / 24 623050M 50 68.0 48.0 50 95 1220 1 / 10
623039M 39 53.0 45.0 41 90 935 1 / 24

198
Deep Socket • Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves KT No. & D1

6235M 3/4"
▪ DIN 3124
ISO 2725-1

D1

D2
l
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
623517M 17 26.0 32.7 20 90 388 2 / 48 623541M 41 56.0 45.0 41 90 864 1 / 24
623518M 18 28.0 32.7 20 90 411 2 / 48 623542M 42 57.0 45.0 46 95 913 1 / 24
623519M 19 30.0 32.7 20 90 437 2 / 48 623543M 43 58.0 45.0 46 95 971 1 / 10
623520M 20 31.0 32.7 22 90 440 2 / 48 623544M 44 60.0 48.0 46 95 1066 1 / 10
623521M 21 32.0 32.7 22 90 444 2 / 48 623545M 45 61.0 48.0 46 95 1073 1 / 10
623522M 22 33.0 35.7 22 90 460 2 / 48 623546M 46 62.0 48.0 46 95 1093 1 / 10
623523M 23 34.0 35.7 24 90 462 2 / 48 623547M 47 63.0 48.0 46 95 1102 1 / 10
623524M 24 35.0 35.7 24 90 477 2 / 48 623548M 48 64.0 48.0 50 95 1093 1 / 10
623525M 25 35.0 35.7 25 90 464 2 / 48 623549M 49 66.0 48.0 50 95 1035 1 / 10
623526M 26 35.7 35.0 25 90 433 1 / 24 623550M 50 68.0 48.0 50 95 1220 1 / 10
623527M 27 38.0 36.0 28 90 431 1 / 24 623551M 51 69.0 50.0 50 95 1282 1 / 10
623528M 28 39.0 36.0 28 90 477 1 / 24 623552M 52 69.0 50.0 50 95 1244 1 / 10
623529M 29 40.0 38.0 28 90 502 1 / 24 623553M 53 70.0 50.0 50 95 1262 1 / 10
623530M 30 42.0 38.0 31 90 584 1 / 24 623554M 54 72.0 50.0 50 95 1342 1 / 10
623531M 31 43.0 38.0 34 90 580 1 / 24 623555M 55 74.0 50.0 50 95 1268 1 / 10
623532M 32 44.0 38.0 34 90 580 1 / 24 623556M 56 75.0 50.0 50 95 1440 1 / 10
623533M 33 46.0 39.0 34 90 646 1 / 24 623557M 57 76.0 50.0 52 100 1555 1 / 10
623534M 34 47.0 42.0 34 90 717 1 / 24 623558M 58 78.0 50.0 52 100 1540 1 / 10
623535M 35 48.0 42.0 37 90 677 1 / 24 623559M 59 78.0 50.0 52 100 1604 1 / 10
623536M 36 50.0 42.0 37 90 724 1 / 24 623560M 60 80.0 50.0 53 100 1662 1 / 10
623537M 37 51.0 45.0 37 90 891 1 / 24 623563M 63 83.0 55.0 53 100 1680 1/6
623538M 38 52.0 45.0 41 90 913 1 / 24 623565M 65 85.0 58.0 55 100 1735 1/6
623539M 39 53.0 45.0 41 90 935 1 / 24 623570M 70 92.0 58.0 55 100 1979 1/6
623540M 40 54.0 45.0 41 90 911 1 / 24

Axial Lock Nut Socket

• Material - chrome vanadium steel
• Finishing - phosphate sunk

64K9M 3/4"
▪ Special for SKF bearing.

Ød1 H D1 D2

KT NO. Designation H S D1 D2 Ød1 L g

mm mm mm mm mm mm mm
64K975M TMFS 11 75 69.4 6.8 83.5 54 77 1600 105 1/6

199
 • Socket made by chrome vanadium alloy steel
Bit Socket • Bit made by silicon alloy steel (S2)
• Polished, chrome plated KT No. & D1

6023 3/4" 6025 3/4"

▪ For torx internal screw ▪ HEXAGON head
▪ DIN 3120 ▪ DIN 7422
▪ E.g. on commercial
vehicles and
agricultural machinery L(mm)
L(mm)
▪ Screw of the
steering tie lever on
commercial vehicles
MAN
▪ 602380: for M series
▪ 6023A0: for F series 602360 6023A0 602514 602519

L L
KT NO. g KT NO. g
Size mm mm mm
602360 T60 80 250 2/48 602514 H14 80 258 2 / 48
602370 T70 80 255 2/48 602517 H17 80 269 2 / 48
602380 T80 80 320 2/48 602519 H19 80 278 2 / 48
602390 T90 80 330 2/48 602522 H22 80 359 2 / 48
6023A0 T100 80 349 2/48

Ratchet & Accessory

• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves

6724 3/4"
▪ Reversible ratchet
▪ 8° gear action degree (45 teeth)
▪ DIN 3122
Overall legth g
KT NO. inch mm
6724-20F 20 500 2300 1/6
6724DK
6724DK renewal kits - -

6779 3/4"
▪ Reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ DIN 3122
Overall legth g
KT NO. inch mm
6779-20F 20 500 2349 1/6
6779DK renewal kits - - 6779DK

6251 3/4"
▪ Extension bar
▪ DIN 3123
KT No. & D1
Overall legth g
KT NO. inch mm
6251-04 4 100 400 4 / 40
6251-08 8 200 732 2 / 20
6251-16 16 400 1362 1 / 10

200
Ratchet & Accessory
• Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves

6452 3/4"
▪ Flexible handle
▪ Action degree -180°
▪ DIN 3122
Overall legth g
KT NO. inch mm
6452-18F 18 450 1717 1 / 10
6452-30F 30 750 2813 1/8
6452DK
6452DK renewal kits - -

6572 3/4"
▪ Sliding T-handle
▪ DIN 3122
Overall legth g
KT NO. inch mm
6572-20 20 500 1542 1 / 10
6572DK renewal kits - - 6572DK

6581 3/4"
▪ 90° L-handle
Overall legth g
KT NO. inch mm
6581-12 12 300 1307 10
6581-18 18 450 1850 12

6585 3/4"
▪ Double driver L-handle 90°
Overall legth g
KT NO. inch mm
6585-19 19 478 2021 12

6791 3/4" 6814 6818 3/4"

▪ Universal joint ▪ Adapter
▪ DIN 3123, ISO 3316 ▪ Convert to 1/2" drive or 1" drive
KT No. & D1 ▪ 6814→Max. torque:666 Nm KT No. & D1
▪ DIN 3123, ISO 3316

1/2" drive(M) 3/4" drive(F)

1" drive(M)

Overall legth g 6814 / 6818

KT NO. inch mm
KT NO. Spec. g
6791 4-1/4 108 590 2 / 20
6814 3/4"F x 1/2"M 131 8 / 96
6818 3/4"F x 1"M 304 6 / 60

201
 Socket Set
6013MR 6013MR01 3/4"
Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)
13
PC.

6013MR 6013MR01
Kg
KT NO. Contents

6013MR 6779-20F 12.5

19, 24, 27, 30, 32, 33, 36, 38, 41 6251-04 6572-20 1
6013MR01 6330M 6251-08 13.23
6724-20F

6014MR 6314MR 3/4"

Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)

14
PC.

6014MR 6314MR
Kg
KT NO. Contents 13.8 1

6014MR
6330M 6779-20F 6251-08 6572-20
22, 24, 27, 30, 32, 36, 38, 41, 46, 50
6251-16
6314MR
6335M

6016MR 6016SR 6316MR 3/4"

Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)
16
PC.

6316MR 6016MR/6016SR
Kg 14.0 1
KT NO. Contents

6016MR
6330M
21, 22, 23, 24, 27, 30, 32, 36, 38, 41, 46, 50 6779-20F 6251-08
6316MR 6251-16
6335M
7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4, 1-3/8, 6572-20
6016SR
6330S 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2

202
Socket Set
6023MR 6023SR 6323MR 3/4"
Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)
23
PC.

6323MR 6023MR/6023SR
Kg 17.1 1
KT NO. Contents

6023MR
6330M 21, 22, 23, 24, 26, 27, 28, 29, 30, 32, 34, 35, 6779-20F 6251-04
36, 38, 41, 46, 50 6251-08
6323MR 6251-16
6335M
7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4,
6023SR 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8,
6330S 1-3/4 1-13/16, 1-7/8, 2 6572-20 6791

6224CR 3/4"
Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)
24
PC.

Kg
KT NO. Contents 15.5 1

22, 24, 27, 30, 32, 36, 38, 41, 46, 50

6330M
6224CR 6779-20F 6251-08 6572-20
1, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 6251-16
6330S 1-1/2, 1-5/8, 1-3/4, 2

6226CR 3/4"
Metal case size (mm) :
537 x 177 x 78 (0.26 cuft)
26
PC.

Kg
KT NO. Contents 15.5 1

22, 24, 27, 30, 32, 36, 38, 41, 46, 50

6330M 6251-04 6572-20
6226CR 6251-08
7/8, 15/16, 1, 1-1/8, 1-3/16, 1-5/16, 1-3/8, 1-7/16,
1-5/8, 1-3/4, 1-7/8, 2 6452-18F
6330S

203
 Socket Set
6014MR12 3/4" 6314MR12 3/4"
Blow case size(mm) Blow case size(mm)
422 x 372 x 92 (0.51 cuft) 14 422 x 372 x 92 (0.51 cuft) 14
PC. PC.

Contents
Kg
10.8 1/2 Contents
Kg
10.8 1/2
22, 24, 27, 30, 32, 36, 38, 41, 46, 22, 24, 27, 30, 32, 36, 38, 41, 46,
6330M 6335M
50 50
6251-04 6251-04
6779-20F 6779-20F
6251-08 6251-08
6572-20 6572-20

204
Standard Socket • Chrome vanadium alloy steel
• Polished, chrome plated
• 4 ball retaining grooves

8330M 1" 8330S 1"

▪ DIN 3124, ISO 2725-1 ▪ ANSI/ASME B107.1

D1

D2
D1

D2

l
l
L
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
833036M 36 52 48 26 65 449 1 / 24 833046S 1-7/16 52 48 26 65 463 1 / 24
833038M 38 54 48 26 65 478 1 / 24 833048S 1-1/2 54 48 26 65 489 1 / 24
833041M 41 58 50 29 70 557 1 / 24 833054S 1-11/16 60 54 29 70 680 1 / 24
833046M 46 65 54 32 75 849 1 / 24 833060S 1-7/8 67 54 34 75 976 1 / 10
833050M 50 70 54 34 75 996 1 / 20 833064S 2 71 54 34 75 988 1 / 10
833054M 54 74 57 38 80 1145 1 / 20 833072S 2-1/4 78 57 42 83 1212 1 / 12
833055M 55 76 57 42 83 1206 1 / 12 833076S 2-3/8 82 58 46 87 1437 1 / 12
833058M 58 79 57 42 83 1263 1 / 12 833084S 2-5/8 90 65 49 90 1693 1 / 12
833060M 60 82 58 46 87 1470 1 / 12 833094S 2-15/16 100 70 52 95 2242 1/8
833063M 63 86 58 46 87 1555 1 / 12 8330A0S 3-1/8 107 80 52 100 2578 1/8
833065M 65 88 65 49 90 1670 1 / 12
833067M 67 91 70 49 91 1670 1 / 12
833070M 70 94 70 50 93 2100 1/8
833071M 71 95 70 50 93 2068 1/8
833075M 75 100 70 50 95 2310 1/8
833077M 77 103 80 52 100 2557 1/8
833080M 80 107 80 52 100 2580 1/8

205
 Ratchet • Material • Finishing
- chrome vanadium alloy steel handle - polished, chrome plated
- chrome molybdenum steel (gear) driver - black driver by phosphate sunk

8779 1"
▪ Reversible ratchet
▪ 15° gear action degree (24 teeth)
▪ DIN 3122
Overall legth g
KT NO. inch mm
8779-32F 32 800 4400 5
8779DK renewal kits - -
8779DK

Accessory • Chrome vanadium handle, chrome molybdenum driver

• Chrome plated handle & black phosphate sunk driver

8251 1" 8581 1"

▪ Extension bar ▪ L-handle
▪ DIN3123 ▪ DIN 3122

Overall length g Overall length g

KT NO. KT NO.
inch mm inch mm
8251-08 8 200 1350 1 / 16 8581-26 26 650 5120 4
8251-16 16 400 2480 1 / 10

8572 1" 8816 1"

▪ Sliding T-handle ▪ Adapter
▪ DIN 3122 ▪ Convert to 3/4" drive
▪ Max. torque:1836 Nm
8572DK
▪ DIN 3123, ISO 3316

3/ 4 " d rive (M ) 1" drive(F)

Overall length g
KT NO.
inch mm
8572-25 25 630 4200 6 KT NO. Spec. g
8572DK renewal kits - -
8816 1"F x 3/4"M 330 6 / 48

Socket Set
8015MR 8015SR 1"
Metal case size (mm) :
660 x 205 x 108 (0.52 cuft)
14
PC.

Kg
KT NO. Contents 34.1 1

8015MR 36, 41, 46, 50, 55, 60, 65, 70, 75, 80
8330M
8779-32F 8251-08 8572-25
1-7/16, 1-1/2, 1-11/16, 1-7/8, 2, 2-1/4, 2-3/8, 8251-16
8015SR
8330S 2-5/8, 2-15/16, 3-1/8

206
Socket Rail Set
7112PR 3/8"+1/2" 7113PR 3/8"+1/2"
▪ Socket rail 260mmL ▪ Socket rail 260mmL
- Rail with 5 PC. 3/8" & 6 PC. 1/2" drive 12 - Rail with 6 PC. 3/8" drive & 6 PC. 1/2" 12
drive clip PC. drive clip PC.

kg kg
Contents 0.76 24 Contents 0.6 32

3375M E4, E5, E6, E8 3375M E4, E5, E6, E7, E8, E11

4375M E10, E12, E14, E16, E18, E20 4375M E10, E12, E14, E16, E18, E20

8771012
3571-08 8771011 3814

Socket Set
5022MR 5022SR 5522MR 1/4"+3/8"
Metal case size (mm) :
285 x 135 x 45 (0.059 cuft)
21
PC.

5022MR / 5522MR 5022SR

Kg 1.60 1 / 10
KT NO. Contents

5022MR
3330M 2335M 363021 3221-03
10, 11, 12, 13, 14, 17, 19 3769-08F 3221-06
5522MR 4, 5, 5.5, 6,
3335M 7, 8, 9 363521
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 363516 3812
2335S 11/32
5022SR
3/8, 7/16, 15/32, 1/2, 9/16, 11/16, 363021
3/4 2178AE
3330S

5039CR 1/4"+3/8"
Metal case size (mm) :
318 x 147 x 46 (0.076 cuft) 39
Contents
kg 2.60 1 / 10 PC.
2335M 4.5, 5, 6, 7, 8, 9, 10, 11, 12
3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8,
2335S
7/16, 1/2
3330M 9, 10, 11, 12, 13, 14, 16, 17, 19

3330S 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4

3769-08F 3221-03 2178AE 363021 3812

207
 Socket Set
5092CR 1/4"+3/8" 7558MR 1/4"+1/2"
Metal case size (mm) : Metal case size (mm) :
445 x 187x 50 (0.147 cuft) 445 x 187 x 50 (0.147 cuft)
91 58
PC. PC.

Kg
Contents 4.4 1/4
Kg
Contents 3.8 1/4
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
13 2335M
12, 13, 14
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
2335S 8, 10, 11, 12, 13, 14, 15, 16, 17,
11/32, 3/8, 7/16, 1/2 4335MR
18, 19, 21, 22, 24
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
2235M
13 1025S 4, 6, 8
5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
2235S
11/32, 3/8, 7/16, 1/2 1025P PH1, PH2, PH3
8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
3330M
18, 19, 20, 21, 22 1025H H3, H4, H5, H6, H7, H8

2015MX H3, H4, H5, H6, H8, H10 T10H, T15H, T20H, T25H, T27H,
1025U
T30H, T40H
2015SX 1/8, 3/16, 7/32, 1/4, 5/16, 3/8 1025Z PZ1, PZ2, PZ3

2011X PH1, PH2, PH3, PH4

2779-55G 4779-10GR 2792 4791R 2141
1115-03 H1.5, H2, H2.5
2221-02 4251-05R 2178AE
2221-04
3769-08F 2571-45 2452-05F 2178AE

2221-02 3221-03
363516 3792 3812 2221-04 3221-06
3840
3/8" drive spin disc. 2561 cross bar. 4-1/2"L

7120PR 7120PR01 3/8"+1/2"

Metal case size (mm) :
296 x 130 x 41 (0.056 cuft) 20
PC.

Kg
KT NO. Contents 2.1 1 / 10

3375M E6, E7, E8, E10

7120PR T30, T40, T45, T50, T55
4023 4375M E12, E14, E16, E18, E20

3023 T10, T15, T20, T25, T27

7120PR01 T30H, T40H, T45H, T50H, T55H
4027 4813

208
Socket Set
9033CR 9035CR 1/4"+3/8"+1/2"
Metal case size (mm) :
450 x 370 x 56 (0.329 cuft) 135
PC.

9033CR 9035CR
Kg 12.3 1/2
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

2335M 2561
cross bar. 4-1/2"L 3792
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
2335S 3/8, 7/16, 1/2
3769-08F 3840
9033CR 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13
2235M 3/8" drive spin disc. 4791R
4768-10F 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
2235S 3/8, 7/16, 1/2
4840
1/2" drive spin disc. 3812
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
3330M 20, 21, 22

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
4330MR 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32 2571-45 2452-05F

3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,

4330SR 13/16, 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-1/4
2221-02 4572-10
2221-04
H3, H4, H5, H6, H8, H10
3725-08F 2015MX
9035CR
3221-03 2178AE
1/8, 3/16, 7/32, 1/4, 5/16, 3/8 3221-06
4725-10FR 2015SX

PH1, PH2, PH3, PH4 463516R

2011X 4251-05R
4251-10R

H1.5, H2, H2.5 463021R

1115-03

209
 Socket Set
9063MR 9063MR01
9563MR 9563MR01 1/4"+3/8"+1/2"
Metal case size (mm) :
476 x 282 x 57 (0.27 cuft) 62
PC.

9063MR/9563MR 9063MR01/9563MR01

Kg 7.4 1/2
KT NO. Contents

4, 4.5, 5, 6, 7, 8,
4330MR 9, 10, 11, 12
9063MR 4768-10F 2335M
363021
T20, T25, T27,
3330M 3769-08F 3023 T30, T40

H4, H5, H6,

9563MR 4335MR 4330MR / 4335MR 3025 H8, H10
12, 13, 14, 15, 16, 17, 3235M
363521
18, 19, 20, 21, 22, 23, 12, 14, 17, 19
3335M 24, 27, 30, 32
2571-45 2221-04
3330M / 3335M
4330MR 8, 9, 10, 11, 12, 13, 14, 4755-10G
9063MR01 3571-08 3221-06
15, 17, 19 363021
3330M 3779-08G 4572-12 4251-06R

9563MR01 4335MR
363521 3235M 3792 4791R 3812
10, 13, 17, 19
3335M

Tool Combination Set

90337MR
Blow case size (mm) :
435 x 265 x 90 (0.37 cuft)
37
Kg
PC.
Contents 4.59 1/2

1411 PH2 x 100, PH2 x 150

1412 6.5 x 100, 6.5 x 150

H2, H3, H4, H5, H6, H8, H10,

1120MR
H1.5, H2.5
T10H, T15H, T20H, T25H, T27H,
1147R
T30H, T40H
8, 9, 10, 11, 12, 13, 14, 15, 16,
1060
17, 19, 21, 22

6111-07 6311-06

3611-08R 7811-16

210
Socket & Tool Set
7077MR 7577MR 1/4"+ 1/2"
Blow case size (mm) :
422 x 360 x 110 ( 0.59 Cuft) 77
PC.

kg
KT NO. Contents 7.52 1/2

1.5, 2, 2.5 4771-10GR

1115-03 2771-55G
4, 5, 6, 7, 8, 9, 10,
2330M 11, 12 PH1, PH2, PH3 6111-07
463016R 1025P
8, 10, 12, 13 6516-10
7077MR 2230M
3, 4, 5, 6
1025S
463021R 2178DF
12, 13, 14, 15, 17,
18, 19, 21, 22, 24, H3, H4, H5, H6 7821-50
4330MR 27, 30, 32 1025H
2571-45
T10, T15, T20, T25,
4222-10
1025T T27, T30, T40
2221-03
4, 5, 6, 7, 8, 9, 10,
2335M 11, 12 PH1 x 80, PH2 x 100, 2312-06
1421 PH3 x 150
463516R
4251-05R
7577MR 8, 10, 12, 13
2235M 2792
4 x 100, 6.5 x 100
1422 4791R
12, 13, 14, 15, 17,
463521R
3824
18, 19, 21, 22, 24, 8, 10, 12, 13, 14, 15,
4335MR 27, 30, 32
1060 17, 19 2141

211
 Socket & Tool Set
7081MR 7581MR
7081MR01 7581MR01 1/4"+1/2"
Blow case size (mm) :
422 x 360 x 110 ( 0.59 cuft) 81
PC.

7581MR01 / 7081MR01 7581MR / 7081MR

Kg
KT NO. Contents 7.14 1/2

1421 PH1 x 80, PH2 x 100

7081MR 4, 4.5, 5, 5.5, 6, 7, 8, 9, 1422 4 x 100, 5.5 x 125, 6.5 x 150

4771-10GR
2330M 10, 11, 12, 13 463016R
1025H H3, H4, H5, H6, H7, H8

1025T
T20, T25, T30, T40
10, 11, 12, 13, 14, 15, H1.5, H2, H2.5, H3, H4, H5, H6,
7081MR01 17, 19, 22, 24 463021R 1120MR H8, H10
4755-10G
4330MR
T10H, T15H, T20H, T25H, T27H,
1147R T30H, T40H

1060 6, 7, 8, 10, 12, 13, 14, 15, 17, 19

7581MR 4, 4.5, 5, 5.5, 6, 7, 8, 9, 4771-10GR 276A-04G 6111-06 6311-06 6516-10

2335M 10, 11, 12, 13 463516R

76104-05 76215-05 76404-06 2221-04

10, 11, 12, 13, 14, 15,

463521R 9DC22 79831 7821-50 4251-05R
7581MR01 17, 19, 22, 24
4335MR 4755-10G
750-60 2792 4791R

212
Socket & Tool Set
7082MR 7582MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft)
83
PC.

Kg
KT NO. Contents 5.65 1/4

8, 10, 11, 12, 13, 14, T40, T45, T50, T55

4, 4.5, 5, 5.5, 6, 7, 8, 9, 1060 17, 19 1836T
10, 11, 12, 13, 14
2330M
PH1, PH2 PZ3, PZ4
2031 1836Z
14, 15, 16, 17, 18, 19, 2771-55G
7082MR 4, 5.5, 6.5
20, 22, 24, 27, 30, 32
4330MR 2032
4771-10G
T8, T10, T15, T20, T25,
T27, T30 2178DF
2033
463016R 463021R 2792 2221-02
H3, H4, H5, H6 4791R 2221-04
2035
4, 4.5, 5, 5.5, 6, 7, 8, 9, 4251-05R
2335M 10, 11, 12, 13, 14 PZ1, PZ2
2038 4222-10

PH3, PH4 2312-06

14, 15, 16, 17, 18, 19,
7582MR 1836P
20, 22, 24, 27, 30, 32 2571-45
4335MR
8x1.2, 10x1.6, 12x2.0 3824
1836S 79831

463516R 463521R H8, H10, H12, H14 7702-25 414810S

1836H

213
 Socket & Tool Set
7087MR 7587MR
7587MR01 7587SR 1/4"+1/2"
Blow case size (mm) :
422 x 360 x 110 (0.59 cuft) 87
PC.

7087MR / 7587MR 7587MR01 7587SR

Kg 9.2 1/2
KT NO. Contents

5, 5.5, 6, 7, 8, 10, 11, 12, 13

2330M H5, H6, H7, H8, H10, H12
7, 8, 10, 12, 13
1636H
20107MR01 2312-06
2230M
7087MR M6, M8, M10, M12
10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 1636M
27, 30, 32
4330MR 463016R
8, 10, 12, 13, 14, 15, 17, 18, 19, 22 T30, T40, T45, T50, T55, T60
1060 1636T

5, 5.5, 6, 7, 8, 10, 11, 12, 13 PH1 x 80, PH2 x 100

2335M 1421
7587MR 7, 8, 10, 12, 13
2312-06
2235M 4 x 100, 5.5 x 100
1422
10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24,
27, 30, 32
4335MR
8, 10, 12, 13, 14, 15, 17, 18, 19, 22 463014R 414810M 4791R 2792
7587MR01 1060
2221-06
4251-05R 2571-45 4453-15FR
463516R 20107MR01

5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 7/16,

2335S 1/2 2779-55G 4779-10GR 6111-06

9/32, 5/16, 3/8,

2235S 7/16, 1/2 20107SR 2312-06 6231-07 6516-10 20407PR
7587SR
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,
25/32, 13/16, 7/8, 15/16, 1-1/16, 1-1/8,
4335SR 1-1/4 19980016 19980410
463516R
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 11/16,
5060 3/4, 13/16, 7/8

214
Socket & Tool Set
7096MR 7596MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft) 96
PC.

Kg 6.22 1/4
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, PH1, PH2

2330M 12, 13, 14 2031 2771-55G
4, 5.5, 6.5
6, 7, 8, 9, 10, 11, 12, 13 2032
2230M
2178DF
T8, T10, T15, T20, T25,
7096MR 14, 15, 17, 19, 22 2033 T27, T30
4230M
4771-10G
10, 11, 12, 13, 14, 15, 16, 17, 18, H3, H4, H5, H6
19, 20, 21, 22, 24, 27, 30, 32 2035 2571-45
4330MR
PZ1, PZ2
16, 21 2038 4222-10
4630R
PH3, PH4 2221-02
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 1836P 2221-04
2335M 12, 13, 14 8x1.2, 10x1.6, 12x2.0
4251-05R
1836S
6, 7, 8, 9, 10, 11, 12, 13
2235M T40, T45, T50, T55 2792
4791R 2745
1836T
7596MR 14, 15, 17, 19, 22
4235M H7, H8, H10, H12, H14 3824
10, 11, 12, 13, 14, 15, 16, 17, 18, 1836H
7702-25
19, 20, 21, 22, 24, 27, 30, 32
4335MR PZ3, PZ4 414810S
1836Z
16, 21 1.5, 2, 2.5
4635R 1115-03

215
 Socket & Tool Set
7098MR 7598MR 1/4"+1/2"
Blow case size (mm) :
422 x 360 x 110 (0.59 cuft) 97
PC.

Kg 8.87 1/2
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, PH2 x 38, PH2 x 100,

12, 13 1421 PH3 x 150 4771-10BR 2771-55F
2330M

7, 8, 10, 12, 13 4 x 100, 6.5 x 38

1422
2330M 2571-45 4573-10
7098MR 6.5 x 150
1462
10, 12, 13, 14, 15, 16, 17, 18,
4330MR 19, 21, 22, 24, 27, 30, 32 4, 5.5, 7, 8 4121-11GR 6111-06
1025S

PH0, PH1, PH2, PH3

463016R 463021R 1025P 6516-10 2178DF

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, H1.5, H2, H2.5, H3, H4,

12, 13 1025H H5, H6, H7, H8, H10 4583-12R 4251-10R
2335M

T8H, T10H, T15H, T20H,

7, 8, 10, 12, 13 1025U T25H, T27H, T30H, T40H 2221-02 2792
2335M 2221-04
7598MR
PZ1, PZ2, PZ3
10, 12, 13, 14, 15, 16, 17, 18, 1025Z 4223-02R 4791R
4335MR 19, 21, 22, 24, 27, 30, 32
6, 7, 8, 10, 12, 13, 14,
1060 15, 16, 17, 18, 19
2141
463516R 463521R

216
Socket & Tool Set
7003MR 7503MR 1/4"+ 1/2"
Blow case size (mm) :
422 x 360 x 110 ( 0.59 Cuft) 103
PC.

kg
KT NO. Contents 9.24 1/2

E4, E5, E6, E7, E8, E10 4771-10GR

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 2375M 2771-55G

2330M
11, 12, 14, 16, 18
6111-07
4375M
8, 9, 10, 11, 12, 13, 14, 15,
7003MR 8, 10, 11, 12, 13, 14, 15, 2178DF
16, 17, 18, 19, 20, 21, 22,
4330MR 23, 24, 27, 30, 32 1060 16, 17, 18, 19, 21, 22, 24
3611-08R
8 x 10, 11 x 13, 12 x 14,
1930 17 x 19 2221-03
2221-06
463016R 463021R
H2, H2.5, H3, H4 , H5, 2571-45
1025H H6, H7, H8, H10 4572-10

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 2312-06

M4, M5, M6, M8, M10
2335M 1025M 4251-05R
4251-10R
T15, T20, T25, T27, T30,
8, 9, 10, 11, 12, 13, 14, 15, 1025T T40, T45, T50 2792
7503MR 16, 17, 18, 19, 20, 21, 22, 4791R
4335MR 23, 24, 27, 30, 32 PH1 x 80, PH2 x 100
1421 4223-02R

5.5 x 125, 6.5 x 150 2128-26

463516R 463521R 1422
2141

217
 Socket & Tool Set
7010MR 7510MR 1/4"+1/2"
Blow case size (mm) :
422 x 360 x 110 (0.59 cuft) 110
PC.

7010MR 7510MR

Kg 9.2 1/2
KT NO. Contents

8, 10, 12, 13 1.5, 2, 2.5, 3, 4, 5, 6, 8,

PH0, PH1, PH2, PH3
2230M
1025P 1145MR 10
5, 5.5, 6, 7, 8, 10, 12,
2330M 13, 14 H2.5, H3, H4, H5, H6 8, 10, 12, 13, 14, 15, 17,
1025H 1060 18, 19
14, 17, 19, 22
4230M 3, 4, 5, 6.5
7010MR
1025S
4771-10GR 276A-04G
8, 10, 12, 13, 14, 15, 17,
T15, T20, T25, T27, T30
18, 19, 22, 24, 27, 30
4330MR 1025T
2178DF 6111-06 6211-06
PZ1, PZ2
463014RC 463016R 1025Z
6516-10 79831

8, 10, 12, 13 H5, H6, H7, H8, H10, H12

2235M 1636H 4452-15FR 2452-05F
5, 5.5, 6, 7, 8, 10, 12, M6, M8, M10, M12
13, 14 1636M 2221-04
2335M 4251-05R
4251-10R
T30, T40, T45, T50, T55, T60
14, 17, 19, 22
7510MR 4235M 1636T
9DC22 7821-50
8, 10, 12, 13, 14, 15, 17, No.1 x 80, No.2 x 100,
18, 19, 22, 24, 27, 30 1421 No.2 x 38
4335MR 4791R 2792 414810M

5.5 x 100, 6.5 x 150,

1422 6.5 x 38 2141
463514RC 463516R

218
Socket & Tool Set
7011MR 7511MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft)
110
PC.

7011MR 7511MR

KT NO. Contents Kg 6.90 1/4

E4, E5, E6, E7, E8 1.5, 2, 2.5

4, 4.5, 5, 5.5, 6, 7, 8, 9, 2375M 1115-03
10, 11, 12, 13, 14
2330M
E10, E11, E12, E14, E16, 2771-55G
6, 7, 8, 9, 10, 11, 12, 13 E18, E20, E24
4375M
2230M 4771-10GR
14, 15, 17, 19, 22 PH1, PH2
2031 2178DF
7011MR 4230M
10, 11, 12, 13, 14, 15, 16, 4, 5.5, 6.5 2221-02
17, 18, 19, 20, 21, 22, 24, 2032 2221-04
4330MR 27, 30, 32
T8, T10, T15, T20, T25, 4222-10
2033 T27, T30
463016R 463021R 4251-05R
H3, H4, H5, H6
2035 2571-45

4, 4.5, 5, 5.5, 6, 7, 8, 9, PZ1, PZ2

3824
10, 11, 12, 13, 14 2038
2335M
PH3, PH4 414810S
6, 7, 8, 9, 10, 11, 12, 13
1836P
2235M 2792
8x1.2, 10x1.6, 12x2.0 4791R
14, 15, 17, 19, 22 1836S
7511MR
4235M 2745
T40, T45, T50, T55, T60
10, 11, 12, 13, 14, 15, 16, 1836T
17, 18, 19, 20, 21, 22, 24, 7702-25
4335MR 27, 30, 32 H7, H8, H10, H12, H14
1836H
PZ3, PZ4
463516R 463521R
1836Z

219
 Socket & Tool Set
7028MR 7528MR 7528MR01 1/4"+1/2"
Blow case size (mm) :
560 x 400 x 110 ( 0.87 Cuft)
128
PC.

7028MR 7528MR 7528MR01

Kg
KT NO. Contents 14.95 1/2
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 19,
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10,
1060 21, 22, 24, 27, 30, 32
2330M 11, 12, 13
8 x 10, 9 x 11, 12 x 13, 14 x 17, 17 x 19
1930
7, 8, 10, 12, 13
2230M T10, T15, T20, T25, T27, T30, T40
1143
2755-55G
7028MR 10, 12, 13, 14, 15, 17, 19 H1.5, H2, H2.5, H3, H4, H5, H6, H8, H10
1145
4230M
5 x 75, 6.5 x 38, 6.5 x 100
1422
8, 9, 10, 11, 12, 13, 14, 15, 4755-10G
PH1 x 80, PH2 x 38, PH2 x 100
4330MR 16, 17, 18, 19, 21, 22, 24, 1421
27, 30, 32
T10, T15, T20, T25, T27
2033
463016R 463021R
H4, H5, H6, 2293-02
2035 H7, H8, H10 2293-06
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 2221-03
H12, H14, H17
2335M 11, 12, 13 2221-06
4025
2755-55G 4223-02R
7528MR 4251-05R
7, 8, 10, 12, 13
7821-50
4251-10R
2235M 6111-07
4755-10G 6211-06 76215-05

10, 12, 13, 14, 15, 17, 19 76404-06

4235M 6511-10
76505-05

8, 9, 10, 11, 12, 13, 14, 15, 4452-15FR 76104-05

2771-55G
4335MR 16, 17, 18, 19, 21, 22, 24,
7528MR01 27, 30, 32 76303-05
2571-45
2128-26
4771-10G 4572-10 2792
463516R 463521R 4791R

220
Socket & Tool Set
7053MR01 7553MR01 1/4"+1/2"
Blow case size (mm) :
560 x 400 x 110 (0.87 cuft)
153
PC.

7053MR01 7553MR01
Kg 14.17 1/2
KT NO. Contents

E4, E5, E6, E7, E8 H5, H6, H7, H8, H10,

1680H H12
2375M
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, M6, M8, M10, M12
2330M 12, 13 1680M
E10, E12, E14,
E16, E18, E20
4375M T25, T30, T40, T45,
10, 11, 12, 13, 14, 15, 16, 17, 1680T T50, T55
18, 19, 20, 21, 22, 23, 24, 25, PH1 x 75, PH2 x 100
4330MR 26, 27, 28, 29, 30, 32 463014RC
1461
7053MR01
5.5 x 100, 6.5 x 150 463016R
6, 7, 8, 9, 10, 11, 12, 13 1462
8, 10, 11, 12, 13, 14,
2230M
PH2 x 38 1060 15, 16, 17, 18, 19, 21,
22, 24, 27
1421
13, 14, 17, 19, 22 8x10, 11x13, 12x14
6.5 x 38 1930
4230M
1422

4, 5.0, 6.5 4771-10GR 2771-55G

1025S

PH0, PH1, PH2

6511-10 6111-06
1025P
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
12, 13 H3, H4, H5, H6
2335M 1025H
6211-06 2178DF

10, 11, 12, 13, 14, 15, 16, 17, PZ1, PZ2, PZ3
18, 19, 20, 21, 22, 23, 24, 25, 1025Z 4462-18FR 2452-05F
4335MR 26, 27, 28, 29, 30, 32
7553MR01 T10, T15, T20, T25,
1025T T27, T30, T40
2221-02 4251-05R
6, 7, 8, 9, 10, 11, 12, 13 2221-06 4251-10R
H5, H6, H7, H8,
2235M 1636H H10, H12
2792 4223-02R 2142
M6, M8, M10, M12 4791R
13, 14, 17, 19, 22 1636M
4235M
T30, T40, T45, T50,
1636T T55, T60 414810M

221
 Socket & Wrench Set
9043MR 9543MR 1/4"+3/8"+1/2"
Blow case size (mm) :
560 x 400 x 110 (0.87 cuft)
143
PC.

9043MR 9543MR
Kg 13.7 1/2
KT NO. Contents

E4, E5, E6, E7, E8 H1.5, H2.0, H2.5, H3.0,

2375M H4.0, H5.0, H6.0, H8.0,
1145MR
H10
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 E10, E12, E14, E16, E20
2330M 4375M 4771-10G

6, 7, 8, 9, 10, 11, 12, 13, PH0, PH1, PH2, PH3

2771-55G
14, 15, 17, 18, 19, 21, 22 1025P
3330M
4, 5.5, 7 2178DF
9043MR 6111-07
8, 10, 12, 13, 14, 15, 16,
1025S
17, 18, 19, 20, 21, 22, 3781-11F
T10, T15, T20, T25, T27,
4330MR 23, 24, 25, 27, 30, 32
1025U T30, T40 4452-18FR

16, 21 H2, H3, H4, H5, H6,

4581-10
4630 1025H H7, H8, H10 6011-10R
PZ0, PZ1, PZ2, PZ3 4222-10
1025Z
2312-06
PH2 x 38, PH1 x 80
1421 2221-02
2221-04
2221-06
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 PH2 x 100
1461 3221-03
2335M
3221-06
6.5 x 38, 5.5 x 75
6, 7, 8, 9, 10, 11, 12, 13, 4251-03R
1422
14, 15, 17, 18, 19, 21, 22
3330M 3824 3812
9543MR 6.5 x 150
1462
2792
8, 10, 12, 13, 14, 15, 16,
6, 7, 8, 9, 10, 11, 12, 3792 2141
17, 18, 19, 20, 21, 22, 4791R
4335M 23, 24, 25, 27, 30, 32 13, 14, 15, 16, 17, 18,
1060
19, 21, 22, 24
7821-30
16, 21
8 x 10, 10 x 12, 11 x 13,
4635 1930 12 x 14, 17 x 19 79093-03M

79831

222
Tools Bag Set
91333MQ
▪▪Electrician tool bag set
33
kg 6.02 1/1 PC.
Contents

1471 VDE NO.2 x 100

1472 VDE 6.5 x 150

6116-07A VDE 7-1/2"

6216-06A VDE 6-1/2"

6318-08A VDE 8-1/4"

6716-06A VDE 6-1/4"

20109MR 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

1/16, 3/32, 1/8, 5/32, 3/16, 1/4,
20129SR
5/16, 3/8, 5/64
3611-08R 200mm
87711C
1421 PH1 x 80, PH2 x 100 Overall size:
550x285x370mm / 39inner pockets
1422 5 x 75, 5 x 100, 6.5 x 100, 6.5 x 150

79093-05C 5M/16FT 19mm

7971-07 165mm

92543MR 92543MR01 1/4"

Tool bag size (mm) :
250 x 400 x 30 (0.11 cuft) 43
PC.

92543MR 92543MR01
Kg 2.49 1 / 10
KT NO. Contents

4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2335M
79093-03C
92543MR PH0 x 60, PH1 x 100, PH2 x 38,
6511-10 6111-07 2178DF
1421 PH2 x 150

7976-65
3.0 x 75, 6.5 x 38, 6.5 x 150
1422 8720813
3611-08P 20317MR
PZ1, PZ2, PZ3
79093-03M 1025Z
92543MR01 2141 2792
T10, T15, T20, T25, T27, T30, T40
7971-07 1025T

223
 IMPACT SOCKETS &
ACCESSORIES
▪ 1/4" Drive
Impact Socket

▪ 3/8" Drive
Impact Socket, Bit Socket &
Accessory

▪ 1/2" Drive
Impact Socket, Bit Socket
Accessory

▪ 3/4" Drive
Impact Socket, Bit Socket &
Accessory

▪ 1" Drive
Impact Socket & Accessory

▪ 1-1/2" Drive
Impact Socket & Accessory

▪ 2-1/2" Drive
Impact Socket

▪ 3-1/2" Drive
Impact Socket

Professional production &

quality control

DIN 50%

KING TONY impact socket 50% higher torque on performance.

Quality control also ensure that a sufficient level of production output.
King Tony uses advance technology to inspect tiny difference on
each step. Our Impact socket reach 50% higher torque than DIN
standards.

224
225
 Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk KT No. & D1

3535S 3/8"
2535M 1/4" ▪ ANSI/ASME B107.2
▪ DIN 3129, ISO 2725-2

KT No. & D1

D 1

D 2
D 1

D 2

l
L

ℓ
L
D1 D2 L g
KT NO. inch mm mm mm mm
KT NO. D1 D2 ℓ L g 353508S 1/4 10.8 19 5 32 31 12 / 360
mm mm mm mm mm
353510S 5/16 13.0 19 6 32 34 12 / 360
253504M 4 7.5 13 4 23 12 20 / 600
353512S 3/8 15.3 19 7 32 38 12 / 360
253545M 4.5 8.1 13 5 23 12 20 / 600
353514S 7/16 17.0 19 7 32 38 12 / 360
253505M 5 8.8 13 6 23 12 20 / 600
353516S 1/2 18.2 19 9 32 53 12 / 360
253555M 5.5 9.4 13 6 23 13 20 / 600
353518S 9/16 20.7 22 9 32 53 10 / 200
253506M 6 10.0 13 7 23 13 20 / 600
353520S 5/8 23.8 22 10 32 57 10 / 200
253507M 7 11.3 13 7 23 13 20 / 600
353522S 11/16 24.5 22 11 32 60 10 / 200
253508M 8 12.5 13 8 23 13 20 / 600
353524S 3/4 27.0 22 11 32 64 10 / 160
253509M 9 13.8 13 8 23 15 12 / 360
253510M 10 15.0 13 9 23 18 12 / 360
253511M
253512M
11
12
16.3
17.5
13
13
9
9
23
23
20
21
12 / 360
12 / 360 Deep Impact Socket
253513M 13 18.8 13 9 23 22 12 / 360
253514M 14 19.8 13 9 23 23 10 / 300
3435M 3/8"
▪ DIN 3121

3535M 3/8"
▪ DIN 3129, ISO 2725-2
D 2
D 1

L
D 1

D 2

KT NO. D1 D2 ℓ L g
L
mm mm mm mm mm
343506M 6 10.6 19 10 65 62 6 / 120
KT NO. D1 D2 ℓ L g 343507M 7 11.8 19 10 65 66 6 / 120
mm mm mm mm mm
343508M 8 13.2 19 12 65 71 6 / 120
353506M 6 10.6 19 5 32 31 12 / 360 343509M 9 14.5 19 12 65 76 6 / 120
353507M 7 11.8 19 5 32 33 12 / 360 343510M 10 15.5 19 12 65 82 6 / 120
353508M 8 13.2 19 6 32 34 12 / 360 343511M 11 17.0 19 13 65 84 6 / 120
353509M 9 14.5 19 6 32 39 12 / 360 343512M 12 18.2 19 14 65 93 6 / 120
353510M 10 15.5 19 7 32 38 12 / 360 343513M 13 19.4 22 14 65 113 6 / 120
353511M 11 17.0 19 7 32 38 12/ 360 343514M 14 20.7 22 14 65 114 6 / 120
353512M 12 18.2 19 8 32 41 12 / 360 343515M 15 22.0 22 16 65 125 6 / 120
353513M 13 19.4 22 9 32 53 10 / 200 343516M 16 23.8 22 16 65 126 6 / 96
353514M 14 20.7 22 9 32 54 10 / 200 343517M 17 24.8 22 17 65 138 6 / 96
353515M 15 22.0 22 10 32 55 10 / 200 343518M 18 25.8 22 18 65 144 6 / 96
353516M 16 23.8 22 10 32 57 10 / 200 343519M 19 27.6 22 20 65 154 6 / 96
353517M 17 24.8 22 11 32 60 10 / 200 343520M 20 28.3 22 20 65 148 6 / 96
353518M 18 25.8 22 11 32 63 10 / 200 343521M 21 29.5 22 22 65 156 6 / 96
353519M 19 27.6 22 13 32 64 10 / 160 343522M 22 30.8 22 22 65 172 5 / 60
343523M 23 32.0 22 24 65 177 5 / 60
343524M 24 32.5 22 24 65 180 5 / 60

226
Deep Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

3435S 3/8" Impact Bit Socket

1. Air pressure must not exceed 90PSI (6.3bar)
▪ ANSI/ASME B107.2
2. Adjust your air tool to its lowest torque output,
should this torque level not be enough,
increase it gradually

3051 3/8"
D 2
D 1

▪ For phillips head screw

l ▪ DIN 3121
L

L g
KT NO.
KT NO. D1 D2 ℓ L g
No. mm
inch mm mm mm mm 305101 PH1 55 33 12 / 360
343508S 1/4 10.8 19 10 63.5 62 6 / 120 305102 PH2 55 35 12 / 360
343510S 5/16 13.0 19 12 63.5 71 6 / 120 305103 PH3 55 40 12 / 360
343512S 3/8 15.3 19 12 63.5 82 6 / 120 305104 PH4 55 45.8 12 / 360
343514S 7/16 17.0 19 13 63.5 84 6 / 120
343516S 1/2 18.2 19 14 63.5 113 6 / 120
343518S 9/16 20.7 22 14 65 114 6 / 120 3052 3/8"
343520S 5/8 23.8 22 16 65 126 6 / 96
▪ For slotted head screw
343522S 11/16 24.5 22 17 65 138 6 / 96
▪ DIN 3121
343524S 3/4 27.0 22 20 65 154 6 / 96
343526S 13/16 29.5 22 22 65 156 6 / 96
343528S 7/8 30.8 22 22 65 172 5 / 60
Tip widh L g
KT NO. mm mm
305255 5.5 55 32.2 12 / 360
305208 8 55 38.4 12 / 360
305210 10 55 45 12 / 360

Impact Star Socket

3055M 3/8"
3575M 3/8"
▪ For hexagon head screw
▪ For torx external screw ▪ DIN 3121
▪ DIN 3121

L Max. torq
KT NO. D1 D2 ℓ L g
KT NO. mm mm Nm
g
Size mm mm mm mm
305504M H4 55 20.8 35 12 / 360
357505M E5 9.6 19 4.0 32 31 12 / 360
305505M H5 55 36.0 38 12 / 360
357506M E6 10.2 19 5.0 32 31 12 / 360
305506M H6 55 62.4 40 12 / 360
357507M E7 10.8 19 6.0 32 33 12 / 360
305507M H7 55 97.0 66 12 / 360
357508M E8 11.5 19 6.5 32 33 12 / 360
305508M H8 55 144.0 45 12 / 360
357510M E10 12.0 19 7.0 32 34 12 / 360
305510M H10 55 264.0 50 12 / 360
357512M E12 14.0 19 9.0 32 34 12 / 360
305512M H12 55 480.0 60 12 / 360
357514M E14 17.0 19 9.5 32 40 12 / 360
305514M H14 55 650.0 77 12 / 288
305516M H16 55 680.0 79 12 / 288
305517M H17 55 715.0 85 12 / 288

227
 • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk KT No. & D1

Impact Bit Socket Impact Accessory

3055S 3/8" 3147 3/8"
▪ For hexagon head ▪ Bit holder
▪ DIN 3121

L g
KT NO. Size mm

L Max. torq 314708S 1/4" 40 44 12 / 420

KT NO. g
inch mm Nm 314710S 5/16" 40 45 12 / 420
305504S 1/8 55 18.8 28 12 / 360 314710M 10mm 40 46 12 / 420
305545S 9/64 55 20.8 29 12 / 360
305505S 5/32 55 22.5 30 12 / 360 3260 3260P 3/8"
305506S 3/16 55 36.0 35 12 / 360
▪ Extension bar & with ball
305507S 7/32 55 62.4 38 12 / 360
▪ DIN 3121
305508S 1/4 55 93.6 39 12 / 360
305510S 5/16 55 144.0 46 12 / 360
305512S 3/8 55 264.0 53 12 / 360
305516S 1/2 55 518.0 70 12 / 360 3260

3065M 3/8"
▪ For hexagon head screw
3260P
▪ DIN 3121
Overall length g
KT NO. inch mm
3260-03 3 75 98.6 6 / 120
3260-04 4 100 121 8 / 160
L Max. torq
3260-05 5 125 145 8 / 144
KT NO. g
mm mm Nm 3260-06 6 150 169.8 5 / 100
306504M H4 90 20.8 42 8 / 160 3260-08 8 200 216 6 / 72
306505M H5 90 36.0 48 8 / 160 3260-10 10 250 230 6 / 54
306506M H6 90 62.4 55 8 / 160 3260-03P 3 75 96 6 / 120
306508M H8 90 144.0 73 8 / 160 3260-04P 4 100 98.6 8 / 160
306510M H10 90 264.0 96 8 / 160 3260-05P 5 125 145 8 / 144
3260-06P 6 150 168 5 / 100
3260-08P 8 200 216 6 / 72
3053 3/8" 3260-10P 10 250 230 6 / 54
▪ For torx internal screw
▪ DIN 3121
3862 3862P 3/8"
▪ Adapter & with ball
▪ Convert to 1/4" drive
▪ DIN 3121

L g
KT NO. Size D D
mm
305310 T10 55 30 12 / 360
305315 T15 55 30 12 / 360
3862 3862P
305320 T20 55 32 12 / 360
305325 T25 55 32 12 / 360 D g
KT NO. Spec. mm
305327 T27 55 33 12 / 360
3862 3/8"F x 1/4"M 20.8 33 24 / 384
305330 T30 55 34 12 / 360
3862P 3/8"F x 1/4"M 20.8 33 24 / 384
305340 T40 55 37 12 / 360
305345 T45 55 41 12 / 360
305350 T50 55 44 12 / 360
305355 T55 55 58 12 / 288
305360 T60 55 65 12 / 288

228
 • Material - chrome molybdenum alloy steel
KT No. & D1 • Finishing - phosphate sunk

Impact Accessory Impact Bit Socket Set

3864 3864P 3/8" 3406MP 3/8"
▪ Adapter & with ball ▪ For hexagon head screw
▪ Convert to 1/2" drive ▪ 55mmL
▪ DIN 3121 Metal case size (mm) : 6
203 x 79 x 41 (0.023 cuft) PC.

D D

3864 3864P
D g
KT NO. Spec. mm
3864 3/8"F x 1/2"M 20.8 51 24 / 384
3864P 3/8"F x 1/2"M 20.8 51 24 / 384

3796 3796P 3/8"

Kg
Contents 0.72 1 / 20
▪ Universal joint & with ball
▪ DIN 3121
3055M H4, H5, H6, H8, H10, H12

3796
3410MP 3/8"
D

▪ For hexagon head screw

L ▪ 55mmL
Metal case size (mm) : 10
3796P 270 x 73 x 46 (0.032 cuft) PC.
Overall length D
KT NO. g
inch mm mm
3796 2 50 22 83.4 10 / 200 ▪ For hex head screw
3796P 2 50 22 83.4 10 / 200 ▪ 55mmL, 4 ~ 12 mm
Metal case size (mm) :
90408 90409 3/8" 203 x 79 x 41 (0.023 cuft)

▪ Locking ring
Kg
▪ High tensile rubber material Contents 1.05 1 / 20
H4, H5, H6, H7, H8, H10, H12
90608 90609 3/8" 3055M
H14, H16, H17
▪ Locking pin
▪ Chrome vanadium steel
3419PP 3/8"
▪ DIN 3129
▪ For torx internal head
▪ 55mmL
d Metal case size (mm) : 9
203 x 79 x 41 (0.023 cuft) PC.

90408 90608
90409 90609
KT NO. Desp. Ø d/ Applied to socket sizes
3535M ( 6~12 mm )3535S ( 1/4~1/2 inch )
90408 ring 3.5 12 3435M ( 6~12 mm ) 3435S ( 1/4~1/2 inch)
3055M ( 4~12 mm ) 3055S ( 3/16~1/2inch)
3065M ( 4~10 mm ) 3053 ( T10~T15 )
90608 pin 2.5 14 3575M ( E5~E14 )
3053.3055.3065.3147.3862.3864

90409 ring 3.5 15 3535M ( 13~19 mm ) 3535S (9/16~3/4inch) Contents Kg

0.62 1 / 20
3435M ( 13~24 mm ) 3435S ( 9/16~7/8inch)
3260.3796 T10, T15, T20, T25, T27, T30, T40,
90609 pin 2.5 16 3053
T45, T50

229
 Stubby Impact Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

4525M 1/2"
▪ For impact wrench use
▪ DIN 3129, ISO 2725-2

D 2
D 1
KT NO. D1 D2 ℓ L g
mm mm mm mm mm
l
L
452513M 13 20 26 5.5 28.5 75 10 / 160
452514M 14 22 26 5.5 28.5 73 10 / 160
452517M 17 26 26 5.5 28.5 66 10 / 160
452519M 19 28 26 10 28.5 64 10 / 160
452521M 21 30 30 10 28.5 82 8 / 160
452522M 22 32 30 10 28.5 88 8 / 160
452524M 24 34 30 10 28.5 97 6 / 120

19, 22, 24 mm
Standard Impact Socket
4530M 1/2" 4530S 1/2"
▪ DIN 3129, ISO 2725-2 ▪ ANSI/ASME B107.2
D 1

D 2
D 1

D 2

l l

L L

KT NO. D1 D2 ℓ L g D1 D2 ℓ L g
mm mm mm mm mm KT NO. inch mm mm mm mm
453008M 8 15.0 25 7 38 67 10 / 200 453016S 1/2 20 25 10 38 71 10 / 200
453009M 9 16.3 25 7 38 67 10 / 200 453018S 9/16 22 25 10 38 77 10 / 200
453010M 10 17.6 25 8 38 70 10 / 200 453020S 5/8 24 25 11 38 111 10 / 200
453011M 11 18.8 25 8 38 71 10 / 200 453022S 11/16 26 30 12 38 116 10 / 160
453012M 12 20.0 25 9 38 72 10 / 200 453024S 3/4 28.8 30 13 38 119 10 / 160
453013M 13 21.2 25 10 38 72 10 / 200 453026S 13/16 30 30 14 40 125 8 / 160
453014M 14 22.5 25 10 38 77 10 / 200 453028S 7/8 32 30 14 40 141 8 / 160
453015M 15 23.8 30 11 38 112 10 / 160 453030S 15/16 34 30 15 42 152 6 / 120
453016M 16 25.0 30 11 38 112 10 / 160 453032S 1 36 30 15 42 168 6 / 120
453017M 17 26.2 30 12 38 115 10 / 160 453034S 1-1/16 38 30 16 44 176 6 / 120
453018M 18 27.5 30 13 38 115 10 / 160 453036S 1-1/8 41 30 17 44 194 6 / 120
453019M 19 28.8 30 13 38 120 10 / 160 453038S 1-3/16 42 30.5 17 44 209 6 / 120
453020M 20 29.5 30 13 38 120 10 / 160
453021M 21 30.0 30 14 40 125 8 / 160
453022M 22 32.4 30 14 40 143 8 / 160
453023M 23 33.2 30 15 40 143 8 / 160
453024M 24 34.4 30 15 42 152 6 / 120
453025M 25 36.0 30 15 42 168 6 / 120
453026M 26 37.0 30 15 42 173 6 / 120
453027M 27 38.0 30 16 44 176 6 / 120
453028M 28 41.0 30 16 44 194 6 / 120
453029M 29 41.0 30 17 44 194 6 / 120
453030M 30 42.0 30.5 17 44 201 6 / 120
453032M 32 46.0 30 19 44 205 6 / 120
453033M 33 46.0 30 19 46 227 6 / 96
453034M 34 46.0 30 20 46 231 6 / 96
453036M 36 47.0 30 20 46 248 6 / 96
453038M 38 50.0 30 21 50 248 6 / 60
453041M 41 56.0 30 22 52 248 6 / 60

230
Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

4535M 1/2" 4535S 1/2"

▪ DIN 3129, ISO 2725-2 ▪ ANSI/ASME B107.2
D 1

D 2

D 1

D 2
l

L l

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
KT NO. D1 D2 ℓ L g
453508M 8 15.0 25 7 38 67 10 / 200 inch mm mm mm mm
453509M 9 16.3 25 7 38 67 10 / 200 453510S 5/16 15 25 7 38 67 10 / 200
453510M 10 17.6 25 8 38 70 10 / 200 453512S 3/8 17 25 7 38 70 10 / 200
453511M 11 18.8 25 8 38 71 10 / 200 453514S 7/16 18 25 8 38 71 10 / 200
453512M 12 20.0 25 9 38 72 10 / 200 453516S 1/2 20 25 10 38 72 10 / 200
453513M 13 21.2 25 10 38 72 10 / 200 453518S 9/16 22 25 10 38 77 10 / 200
453514M 14 22.5 25 10 38 77 10 / 200 453520S 5/8 24 25 11 38 112 10 / 160
453515M 15 23.8 30 11 38 112 10 / 160 453522S 11/16 26 30 12 38 115 10 / 160
453516M 16 25.0 30 11 38 112 10 / 160 453524S 3/4 28.8 30 13 38 120 10 / 160
453517M 17 26.2 30 12 38 115 10 / 160 453526S 13/16 30 30 14 40 125 8 / 160
453518M 18 27.5 30 13 38 115 10 / 160 453528S 7/8 32 30 14 40 143 8 / 160
453519M 19 28.8 30 13 38 120 10 / 160 453530S 15/16 34 30 15 42 152 6 / 120
453520M 20 29.5 30 13 38 120 10 / 160 453532S 1 36 30 15 42 168 6 / 120
453521M 21 30.0 30 14 40 125 8 / 160 453534S 1-1/16 38 30 16 44 176 6 / 120
453522M 22 31.8 30 14 40 143 8 / 160 453536S 1-1/8 41 30 17 44 194 6 / 120
453523M 23 33.8 30 15 40 143 8 / 160 453538S 1-3/16 42 30.5 17 44 201 6 / 120
453524M 24 33.8 30 15 42 152 6 / 120 453540S 1-1/4 46 30 18 44 205 6 / 120
453525M 25 35.8 30 15 42 168 6 / 120
453526M 26 37.8 30 15 42 173 6 / 120
453527M 27 38.0 30 16 44 176 6 / 120
453528M 28 41.0 30 16 44 194 6 / 120
453529M 29 41.0 30 17 44 194 6 / 120
453530M 30 42.0 30.5 17 44 201 6 / 120
453532M 32 46.0 30 19 44 205 6 / 120
453533M 33 46.0 30 19 46 227 6 / 96
453534M 34 46.0 30 20 46 231 6 / 96
453536M 36 47.0 30 20 46 248 6 / 96
453538M 38 50.0 30 21 50 241 6 / 60
453539M 39 51.0 30 22 50 240 6 / 60
453541M 41 56.0 30 22 52 283 6 / 60
453546M 46 64.0 30 23 55 408 4 / 32

231
 Impact Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4472MP 158
PC. 4472SP 106
PC.
1/2"
▪ Standard impact socket
Stand size (mm) :
415 x 336 x 320

4472MP / 4472SP
Each Kg
KT NO. Contents KT NO. Spec. Cuft
Q'ty

8 4472MP-A 87103 6.37 0.67

8, 9, 10, 11, 12, 13, 14, 15, 6
4472MP 16, 17, 18, 19, 20, 21, 22, 23, 7
24, 25, 26, 27, 28, 29, 30, 32 6 158 PC. socket
4535M 4472MP-D 19.63 0.54
5 content

8 4472SP-A 87103 6.37 0.67

5/16, 3/8, 7/16, 1/2, 9/16
6
5/8, 11/16, 3/4, 13/16
4472SP 7
7/8, 15/16, 1, 1-1/16, 1-1/8 106 PC. socket
4535S 6 4472SP-D 20.4 0.37
1-3/16, 1-1/4 content
5

4466MP 166
PC. 4466SP 102
PC.
1/2"
▪ Deep impact socket
Stand size (mm) :
415 x 336 x 320

4466MP / 4466SP

Each Kg
KT NO. Contents KT NO. Spec. Cuft
Q'ty

8, 9, 10, 11, 12, 13, 14 8 4466MP-A 87103 6.37 0.67

15, 16, 17, 18, 19, 20, 21, 22, 23, 24 7
4466MP
25, 26, 27, 28, 29 6
4535M 30, 32 5 4466MP-DA 22.06 0.38
166 PC. socket
content
5/16, 3/8, 7/16, 1/2, 9/16 4466MP-DB 24.10 0.45
8
5/8, 11/16, 3/4, 13/16, 7/8, 15/16
7
4466SP 1, 1-1/16, 1-1/8
6
4535S 1-3/16, 1-1/4 4466SP-A 87103 6.37 0.67
5

102 PC. socket

4466SP-D 28.0 0.47
content

232
Deep Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

4430M 1/2" 4435M 1/2"

▪ DIN 3121 ▪ DIN 3121
D 1

D 2

D 1

D 2
l
l
L
L

D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
KT NO. mm mm mm mm mm
mm mm mm mm mm
443008M 8 15.0 25 12 78 130 6 / 120 443508M 8 15.0 25 12 78 116 6 / 120
443009M 9 16.3 25 12 78 135 6 / 120 443509M 9 16.3 25 12 78 125 6 / 120
443010M 10 17.6 25 12 80 150 6 / 120 443510M 10 17.6 25 12 80 136 6 / 120
443011M 11 18.8 25 13 80 160 6 / 120 443511M 11 18.8 25 13 80 144 6 / 120
443012M 12 20.0 25 14 80 170 6 / 120 443512M 12 20.0 25 14 80 157 6 / 120
443013M 13 21.2 25 14 80 165 6 / 120 443513M 13 21.2 25 14 80 157 6 / 120
443014M 14 22.5 25 14 80 180 6 / 120 443514M 14 22.5 25 14 80 172 6 / 120
443015M 15 23.8 30 16 80 236 6 / 96 443515M 15 23.8 30 16 80 223 6 / 96
443016M 16 25.0 30 16 80 243 6 / 96 443516M 16 25.0 30 16 80 230 6 / 96
443017M 17 26.2 30 16 80 255 6 / 96 443517M 17 26.2 30 16 80 240 6 / 96
443018M 18 27.5 30 17 80 267 6 / 96 443518M 18 27.5 30 17 80 255 6 / 96
443019M 19 28.8 30 18 80 260 6 / 96 443519M 19 28.8 30 18 80 236 6 / 96
443020M 20 29.5 30 20 80 252 6 / 96 443520M 20 29.0 30 20 80 244 6 / 96
443021M 21 30.0 30 20 80 251 6 / 96 443521M 21 30.0 30 20 80 240 6 / 96
443022M 22 32.4 30 22 80 304 5 / 60 443522M 22 31.8 30 22 80 296 5 / 60
443023M 23 33.2 30 24 80 310 5 / 60 443523M 23 33.8 30 24 80 300 5 / 60
443024M 24 34.4 30 24 80 318 5 / 60 443524M 24 33.8 30 24 80 308 5 / 60
443027M 27 38.0 30 27 80 368 5 / 60 443525M 25 35.8 30 24 80 342 5 / 60
443030M 30 42.0 30.5 30 80 422 5 / 50 443526M 26 37.8 30 27 80 344 5 / 60
443032M 32 46.0 30 32 80 460 1 / 24 443527M 27 38.0 30 27 80 356 5 / 60
443036M 36 47.0 30 36 80 535 1 / 24 443528M 28 41.0 30 27 80 424 5 / 50
443529M 29 41.0 30 27 80 404 5 / 50
443530M 30 42.0 30.5 30 80 416 5 / 50
443532M 32 46.0 30 32 80 510 1 / 24
443533M 33 46.0 30 32 80 521 1 / 24
443534M 34 46.0 30 33 80 539 1 / 24
443536M 36 47.0 30 36 80 556 1 / 24
443538M 38 50.0 30 38 80 617 1 / 24
443541M 41 56.0 30 38 80 635 1 / 24
443546M 46 64.0 30 40 80 825 1 / 24

233
 Deep Impact Socket Impact Thin Wall Socket
• Material - chrome molybdenum alloy steel
4430S 1/2" • Finishing - phosphate sunk
KT No. & D1
▪ ANSI/ASME B107.2
4835M 1/2"
▪ DIN 3121
D 1

D 2

D 1

D 2
l

L
l

KT NO. D1 D2 ℓ L g D1 D2 ℓ L g
inch mm mm mm mm KT NO. mm mm mm mm mm
443020S 5/8 24 25 16 80 233 6 / 96 483510M 10 16 25 20 52 92 10 / 180
443024S 3/4 28.8 30 18 80 250 6 / 96 483511M 11 17 25 20 52 92 10 / 180
443028S 7/8 32 30 22 80 294 5 / 60 483512M 12 18 25 20 52 92 10 / 180
443030S 15/16 34 30 24 80 308 5 / 60 483513M 13 19 25 20 52 95 10 / 180
443032S 1 36 30 24 80 341 5 / 60 483514M 14 21 25 20 52 101 10 / 180
443034S 1-1/16 38 30 27 80 358 5 / 60 483516M 16 23 25 20 52 149 8 / 80
443036S 1-1/8 41 30 27 80 401 5 / 50 483517M 17 25 25 23 52 152 8 / 80
443040S 1-1/4 46 30 32 80 504 1 / 24 483519M 19 27 30 23 52 148 8 / 80
443042S 1-5/16 46 30 34 80 476 1 / 24 483521M 21 29 30 25 52 152 8 / 80
443048S 1-1/2 50 30 34 80 564 1 / 24 483522M 22 31 30 25 52 164 8 / 80
483523M 23 32 30 26 52 172 8 / 80
483524M 24 33 30 26 52 174 8 / 80
483526M 26 36 30 27 65 241 6 / 60
4435S 1/2" 483527M 27 37 30 27 65 248 6 / 60
▪ ANSI/ASME B107.2 483530M 30 41 30.5 27 65 296 5 / 50

4930M 1/2"
▪ DIN 3121
D 1

D 2

l
D 1

D 2

KT NO. D1 D2 ℓ L g
L

inch mm mm mm mm
KT NO. D1 D2 ℓ L g
443510S 5/16 14 25 12 78 123 6 / 120 mm mm mm mm mm
443512S 3/8 17 25 12 80 148 6 / 120 493008M 8 13.2 25 20 78 130 6 / 120
443514S 7/16 18 25 13 80 148 6 / 120 493009M 9 14.0 25 20 78 135 6 / 120
443516S 1/2 20 25 14 80 159 6 / 120 493010M 10 15.5 25 20 80 150 6 / 120
443518S 9/16 22 25 14 80 170 6 / 120 493011M 11 16.7 25 20 80 160 6 / 120
443520S 5/8 24 25 16 80 232 6 / 96 493012M 12 18.0 25 20 80 170 6 / 120
443522S 11/16 26 30 17 80 235 6 / 96 493013M 13 19.0 25 20 80 165 6 / 120
443524S 3/4 28.8 30 18 80 251 6 / 96 493014M 14 20.5 25 20 80 180 6 / 120
443526S 13/16 30 30 20 80 243 6 / 96 493015M 15 21.5 30 20 80 236 6 / 96
443528S 7/8 32 30 22 80 292 5 / 60 493016M 16 23.0 30 20 80 243 6 / 96
443530S 15/16 34 30 24 80 308 5 / 60 493017M 17 24.5 30 23 80 255 6 / 96
443532S 1 36 30 24 80 336 5 / 60 493018M 18 25.5 30 23 80 267 6 / 96
443534S 1-1/16 38 30 27 80 356 5 / 60 493019M 19 27.0 30 23 80 260 6 / 96
443536S 1-1/8 41 30 27 80 401 5 / 50 493020M 20 28.0 30 23 80 252 6 / 96
443538S 1-3/16 42 30.5 30 80 409 5 / 50 493021M 21 29.0 30 25 80 251 6 / 96
443540S 1-1/4 46 30 32 80 423 1 / 24 493022M 22 30.5 30 25 80 304 5 / 60
443542S 1-5/16 46 30 34 80 476 1 / 24 493023M 23 32.0 30 26 80 310 5 / 60
493024M 24 33.0 30 26 80 318 5 / 60
493027M 27 37.0 30 27 80 368 5 / 60
493030M 30 40.5 30 27 80 422 5 / 50
493032M 32 42.5 30 27 80 460 5 / 50
493036M 36 45.5 30 32 80 535 1 / 24

234
 KT No. & D1

Impact Thin Wall Socket Extra Thin Wall Impact Socket

• Material - chrome molybdenum alloy steel • Finishing - phosphate sunk
• Finishing - phosphate sunk • For aluminum alloy wheel

4935M 1/2" •
•
Material - chrome molybdenum alloy steel
Super thin wall version has less strength than standard
▪ DIN 3121 deep one

4415M 1/2"
▪ DIN 3121 Thin walled design (D1)
D 2
D 1

D 2
D 1
L

KT NO. D1 D2 ℓ L g
l
mm mm mm mm mm L
493510M 10 15.5 25 20 80 132 6 / 120
493511M 11 16.7 25 20 80 151 6 / 120
KT NO. D1 D2 ℓ L g
493512M 12 18.0 25 20 80 148 6 / 120 mm mm mm mm mm
493513M 13 19.0 25 20 80 148 6 / 120 441517M 17 23.8 25 17 80 171 6 / 96
493514M 14 20.5 25 20 80 156 6 / 120 441519M 19 25.8 30 20 80 209 6 / 96
493516M 16 23.0 30 20 80 213 6 / 96 441521M 21 27.8 30 22 80 219 6 / 96
493517M 17 24.5 30 23 80 230 6 / 96 441522M 22 29.5 30 24 80 237 6 / 96
493519M 19 27.0 30 23 80 238 6 / 96
493521M 21 29.0 30 25 80 234 6 / 96
493522M
493523M
22
23
30.5
32.0
30
30
25
26
80
80
294
300
5 / 60
5 / 60 Wheel Nut Impact Socket
493524M 24 33.0 30 26 80 285 5 / 60 • Material - chrome molybdenum alloy steel
493526M 26 35.5 30 27 80 341 5 / 60 • Finishing - phosphate sunk
493527M 27 37.0 30 27 80 358 5 / 60 • Durable outer sleeve protects polished wheels and lug nut
493530M 30 40.5 30 27 80 413 5 / 50
4945MX 1/2"
▪ DIN 3121
4935S 1/2"
▪ ANSI/ASME B107.2
D1 D2

l
L

17mm 19mm 21mm

ℓ
D 2
D 1

D1 D2 L g
KT NO.
mm mm mm mm mm
l
494517MX 17 27.3 30 26 85 214 5 / 60
L
494519MX 19 29.3 30 26 85 229 5 / 60
494521MX 21 30.9 30 26 85 237 5 / 60
KT NO. D1 D2 ℓ L g

Double - Ended Impact Socket

inch mm mm mm mm
493510S 5/16 13.0 25 20 80 129 6 / 120
493512S 3/8 16.0 25 20 80 145 6 / 120 • Material - chrome molybdenum alloy steel
493514S 7/16 16.7 25 20 80 148 6 / 120 • Finishing - phosphate sunk
493516S 1/2 19.0
493518S 9/16 20.5
25
25
20
20
80
80
159
165
6 / 120
6 / 120
4915M
493520S 5/8 23.0 25 20 80 170 6 / 96
4915S 1/2"
493522S 11/16 24.5 30 23 80 235 6 / 96
28 26
493524S 3/4 27.0 30 23 80 255 6 / 96
493526S 13/16 29.0 30 25 80 292 6 / 96
D2

D1

493528S 7/8 30.5 30 25 80 308 5 / 60

493530S 15/16 33.0 30 26 80 336 5 / 60
L
493532S 1 34.0 30 26 80 356 5 / 60
493534S 1-1/16 37.0 30 27 80 405 5 / 60 D1 D2 L g
KT NO. mm / inch mm mm mm
493536S 1-1/8 39.0 30 27 80 414 5 / 50
493538S 1-3/16 40.5 30 27 80 417 5 / 50 49151719M 17 x 19 26 28 77 210 6 / 96
493540S 1-1/4 42.5 30 27 80 422 5 / 50 49151921M 19 x 21 26 28 77 200 6 / 96
49152122M 21 x 22 30 32 77 310 5 / 60
49152123M 21 x 23 30 32 77 310 5 / 60
49152426S 3/4" x 13 / 16" 26 28 77 200 6 / 96

235
 Impact Star Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

4575M 1/2"
▪ For torx external screw
▪ DIN 3121

KT NO. D1 D2 ℓ L g
Size mm mm mm mm
457510M E10 14.0 25.0 7.5 38 67 10 / 200

D 1

D 2
457512M E12 15.9 25.0 9.0 38 69 10 / 200
457514M E14 17.7 25.0 10.0 38 71 10 / 200 l

457516M E16 20.0 25.0 11.0 38 76 10 / 200 L

457518M E18 22.0 25.0 12.5 38 79 10 / 200

457520M E20 24.5 30.0 14.0 38 118 10 / 160

Impact Universal Joint Socket

4B55M 4B55S 1/2" 4A55M 4A55S 1/2"
▪ Special design for confined spaces ▪ Special design for confined spaces
▪ DIN 3121 ▪ DIN 3121

Standard Length Deep Version

D 1

D 2

D 1

D 2
l
L
l
D1 D2 L ℓ L
KT NO. mm/inch mm mm mm mm
g
KT NO. D1 D2 ℓ
L g
mm/inch mm mm mm mm
4B5510M 10 17.0 27.5 12 64 161 10 / 120
4A5510M 10 17.0 27.5 19 91 195 10 / 80
4B5511M 11 19.0 27.5 12 64 166 10 / 120
4A5511M 11 19.0 27.5 19 91 207 10 / 80
4B5512M 12 19.0 27.5 12 64 162 10 / 120
4A5512M 12 19.0 27.5 19 91 202 10 / 80
4B5513M 13 21.8 27.5 12 64 176 10 / 120
4A5513M 13 21.8 27.5 19 91 207 10 / 80
4B5514M 14 22.0 27.5 12 64 174 10 / 120
4A5514M 14 22.0 27.5 19 91 217 10 / 80
4B5515M 15 22.0 27.5 12 64 172 10 / 120
4A5515M 15 22.0 27.5 19 91 228 10 / 80
4B5516M 16 23.9 27.5 12 64 180 10 / 120
4A5516M 16 23.9 27.5 19 91 234 10 / 80
4B5517M 17 25.0 27.5 12 64 173 10 / 120
4A5517M 17 26.0 27.5 19 91 256 6 / 60
4B5518M 18 25.8 27.5 12 64 173 10 / 120
4A5518M 18 26.0 27.5 19 91 248 6 / 60
4B5519M 19 27.9 27.5 12 64 187 10 / 120
4A5519M 19 27.9 27.5 19 91 259 6 / 60
4B5521M 21 30.0 27.5 12 64 190 10 / 120
4A5521M 21 30.0 27.5 19 91 272 6 / 60
4B5522M 22 31.7 27.5 12 64 196 10 / 120
4A5522M 22 31.7 27.5 23.5 91 278 6 / 60
4B5524M 24 35.8 27.5 12 64 217 6 / 96
4A5524M 24 35.8 27.5 24 91 309 6 / 60
4B5512S 3/8 17.0 27.5 12 64 161 10 / 120
4A5512S 3/8 17.0 27.5 19 91 195 10 / 80
4B5514S 7/16 19.0 27.5 12 64 166 10 / 120
4A5514S 7/16 19.0 27.5 19 91 207 10 / 80
4B5516S 1/2 21.8 27.5 12 64 176 10 / 120
4A5516S 1/2 21.8 27.5 19 91 207 10 / 80
4B5518S 9/16 22.0 27.5 12 64 174 10 / 120
4A5518S 9/16 22.0 27.5 19 91 217 10 / 80
4B5520S 5/8 23.9 27.5 12 64 180 10 / 120
4A5520S 5/8 23.9 27.5 19 91 234 10 / 80
4B5522S 11/16 25.0 27.5 12 64 173 10 / 120
4A5522S 11/16 26.0 27.5 19 91 256 6 / 60
4B5524S 3/4 27.9 27.5 12 64 187 10 / 120
4A5524S 3/4 27.9 27.5 19 91 259 6 / 60
4B5526S 13/16 30.0 27.5 12 64 190 10 / 120
4A5526S 13/16 30.0 27.5 19 91 273 6 / 60
4B5528S 7/8 31.7 27.5 12 64 196 10 / 120
4A5528S 7/8 31.7 27.5 23.5 91 278 6 / 60
4B5530S 15/16 35.8 27.5 12 64 217 6 / 96
4A5530S 15/16 35.8 27.5 24 91 309 6 / 60

236
Impact Bit Socket KT No. & D1
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
4053 4063 1/2"
1. Air pressure must not exceed 90PSI (6.3bar) ▪ For torx internal screw
2. Adjust your air tool to its lowest torque output, ▪ DIN 3121
should this torque level not be enough,
increase it gradually 4053

4055M 1/2"
▪ Hexagon head
▪ DIN 3121
4063

L g
KT NO. Size
mm mm
405320 T20 60 58.0 10 / 180
L Max. torq 405325 T25 60 73.0 10 / 180
KT NO. g
mm mm Nm
405327 T27 60 73.5 10 / 180
405504M H4 60 20.8 72 10 / 180 405330 T30 60 74.0 10 / 180
405505M H5 60 36.0 73 10 / 180 405340 T40 60 85.0 10 / 180
405506M H6 60 62.4 74 10 / 180 405345 T45 60 90.0 10 / 180
405507M H7 60 97.0 76 10 / 180 405350 T50 60 95.0 10 / 180
405508M H8 60 144.0 78 10 / 180 405355 T55 60 100.0 10 / 180
405510M H10 60 264.0 86 10 / 180 405360 T60 60 105.0 10 / 180
405512M H12 60 480.0 99 10 / 180 405370 T70 60 105.0 10 /180
405513M H13 60 518.0 105 10 / 180 406325 T25 100 97.0 6 / 120
405514M H14 60 650.0 110 10 / 180 406327 T27 100 97.5 6 / 120
405516M H16 60 680.0 127 10 / 180 406330 T30 100 98.0 6 / 120
405517M H17 60 715.0 180 10 / 80 406340 T40 100 110.0 6 / 120
405518M H18 60 740.0 179 10 / 80 406345 T45 100 130.0 6 / 120
405519M H19 60 786.0 199 10 / 80 406350 T50 100 150.0 6 / 120
406355 T55 100 160.0 6 / 120
4055S 1/2" 406360 T60 100 170.0 6 / 120
▪ Hexagon head
▪ ANSI/ASME B107.2

1740 409616M 1/2"

▪ Hex bit & bit holder
▪ DIN 3121

L Max. torq g
KT NO. inch mm Nm
405506S 3/16 60 36.0 66 10 / 180
405508S 1/4 60 93.6 74 10 / 180
405510S 5/16 60 144.0 77 10 / 180
405512S 3/8 60 264.0 80 10 / 180
405514S 7/16 60 420.0 84 10 / 180 409616M
405516S 1/2 60 518.0 88 10 / 180 1740

4056M 1/2"
3 0

▪ Spline head S L
▪ DIN 3121 1 6 L 1 6

S L Max. torq g
KT NO. mm mm Nm
174010H H10 40 264.0 46 20 / 400
174012H H12 40 480.0 52 20 / 400
L Max. torq g 174014H H14 40 684.0 60 20 / 200
KT NO. Size mm Nm 174017H H17 40 680.0 73 20 / 200
405608M M8 60 62.4 73 10 / 180 174019H H19 40 680.0 80 20 / 200
405610M M10 60 144.0 81 10 / 180 174022H H22 40 680.0 97 12 / 120
405612M M12 60 229.0 88 10 / 180 409616M 16 38 680.0 145 10 / 160

237
 Impact Bit Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1
1. Air pressure must not exceed 90PSI (6.3bar)
4015M 1/2" 2. Adjust your air tool to its lowest torque output,
should this torque level not be enough,
▪ Hexagon head increase it gradually
▪ DIN 3121
4065M 1/2"
▪ Hexagon head
▪ DIN 3121

L Max. torq g
KT NO. mm
mm mm Nm
401505M H5 80 36.0 84 6 / 120
401506M H6 80 62.4 86 6 / 120
401507M H7 80 97.0 89 6 / 120 L Max. torq g
KT NO. mm mm Nm
401508M H8 80 144.0 96 6 / 120
401509M H9 80 229.0 114 6 / 120 406504M H4 100 20.8 96 6 / 120
401510M H10 80 264.0 136 6 / 120 406505M H5 100 36.0 97 6 / 120
401512M H12 80 480.0 145 6 / 120 406506M H6 100 62.4 98 6 / 120
401513M H13 80 518.0 155 6 / 120 406508M H8 100 144.0 110 6 / 120
401514M H14 80 650.0 164 6 / 120 406510M H10 100 264.0 150 6 / 120
401517M H17 80 715.0 248 6 / 96 406512M H12 100 480.0 170 6 / 120
401519M H19 80 786.0 246 6 / 96 406514M H14 100 650.0 190 6 / 120

4015S 1/2"
4075M 1/2"
▪ Hexagon head
▪ Hexagon head
▪ DIN 3121
▪ DIN 3121

L Max. torq g L Max. torq

KT NO. KT NO. g
inch
mm mm Nm mm mm Nm
mm
401508S 1/4 80 93.6 87 6 / 120 407505M H5 150 36.0 115 6 / 120
401510S 5/16 80 144.0 90 6 / 120 407506M H6 150 62.4 125 6 / 120
401512S 3/8 80 264.0 125 6 / 120 407508M H8 150 144.0 145 6 / 120
401516S 1/2 80 518.0 150 6 / 120 407510M H10 150 264.0 185 6 / 120
407512M H12 150 480.0 225 6 / 120
407514M H14 150 650.0 250 6 / 120

Impact Accessory
4147 1/2" 414A08S 1/2"
▪ Bit holder ▪ Bit holder
▪ DIN 3121 ▪ Quick-release
▪ DIN 3121

Overall length g
KT NO. Size mm
414708S 1/4" 48 69 12 / 216 Overall length
KT NO. Size g
414710S 5/16" 48 70 12 / 216 mm
414710M 10 mm 48 72 12 / 216 414A08S 1/4" 51.2 93.6 10 / 180

238
Impact Accessory
• Material - chrome molybdenum alloy steel KT No. & D1
• Finishing - phosphate sunk

4260 4260P 1/2"

▪ Extension bar & with ball
▪ DIN 3121

4260 4260P

Overall length g Overall length g

KT NO. KT NO.
inch mm inch mm
4260-03 3 75 197 4 / 80 4260-03P 3 75 197 4 / 80
4260-04 4 100 255 4 / 80 4260-04P 4 100 255 4 / 80
4260-05 5 125 277 2 / 40 4260-05P 5 125 277 2 / 40
4260-06 6 150 340 4 / 80 4260-06P 6 150 340 4 / 80
4260-08 8 200 423 4 / 48 4260-08P 8 200 423 4 / 48
4260-10 10 250 452 4 / 48 4260-10P 10 250 452 4 / 48
4260-12 12 300 595 2 / 40 4260-12P 12 300 595 2 / 40
4260-16 16 400 746 2 / 20 4260-16P 16 400 746 2 / 20

4269 1/2"
▪ Torque extension bar
▪ Color coded and engraved with Nm and ft.lb setting 4269-08-90
▪ Helps to eliminate overtorqued lug nut
4269-08-A0

4269-08-B0
Max. torq Overall length g
KT NO. Color
mm Nm ft.lbs inch mm 4269-08-C0
4269-08-90 90 65 7-11/16 195 192
4269-08-D5
4269-08-A0 100 75 7-11/16 195 201
4269-08-B0 110 80 7-11/16 195 217 4269-08-F0
4269-08-C0 120 90 7-11/16 195 224
4269-08-D5 135 100 7-11/16 195 238 4269-08-G0
4269-08-F0 150 110 7-11/16 195 263
4269-08-H5
4269-08-G0 160 120 7-11/16 195 304
4269-08-H5 175 130 7-11/16 195 284 4269-08-J0
4269-08-J0 190 140 7-11/16 195 331
4269-08-K0 200 150 7-11/16 195 344 4269-08-K0

Torque(Nm)
250
Standard impact socket
200

How to use torque extension bar 150

1. Use with 1/2”DR. impact wrench, don’t use by hand.
2. Set air pressure 0.6 MPa(90 PSI) and adjust torque value
100 90Nm Torque extension bar
between 190 Nm and 210 Nm.
3. Select suitable torque extension bar according to wheel
nut size and indicated tightening torque. 50
4. Attach the torque extension bar with socket to impact
wrench and apply load.
5. Check the actual tightening torque value by torque Time(sec.)
0 1 2 3 4 5
wrench. 1/2" Impact wrench 0.6Mpa Air pressure
6. Adjust air pressure or torque value according to the result
of above.
7. Tight other wheel nuts in diagonal order.

239
 Impact Accessory Set
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4481PP1 1/2"
▪ Torque extension bar set

10
Contents Kg
15.51 1/6 PC.

4269-08-90 90 Nm

4269-08-A0 100 Nm

4269-08-B0 110 Nm

4269-08-C0 120 Nm

4269-08-D5 135 Nm

4269-08-F0 150 Nm

4269-08-G0 160 Nm

4269-08-H5 175 Nm

4269-08-J0 190 Nm

4269-08-K0 200 Nm

Impact Accessory
9TE41
▪ Hook for torque extension bar
▪ Groove capacity: 22 mm

Ø22mm

Overall length g
KT NO. (mm)
9TE41 311 196.4 1 / 24

240
Impact Accessory
• Material - chrome molybdenum alloy steel KT No. & D1
• Finishing - phosphate sunk

4796 4796P 1/2" 4863 4863P

▪ Universal joint & with ball
▪ DIN 3121 4866 4866P 1/2"
▪ Adapter & with ball
▪ Convert to 3/8", 3/4" drive
▪ 4863 → Max. torque:303 Nm
4796
▪ DIN 3121
D

4796P 4863 & 4866

29mm
Overall length D g
KT NO.
inch mm mm
4796 2-3/8 59 25 121 6 / 96
4863 / 4863P
4796P 2-3/8 59 25 121 6 / 96

4863P & 4866P

KT NO. Spec. g
479AP 4797 4797P 1/2"
4863 1/2"F x 3/8"M 95 10 / 160
▪ Universal joint & with ball
4866 1/2"F x 3/4"M 174 8 / 160
▪ DIN 3121
4863P 1/2"F x 3/8"M 95 10 / 160
4866P 1/2"F x 3/4"M 174 8 / 160

479AP 4797

4873 4873P 1/2"

D ▪ Adapter & with ball
25° ▪ Convert to 3/8"
4797P
L ▪ 4873 → Max. torque:303 Nm
▪ DIN 3121
Overall length D g
KT NO.
inch mm mm 4873
25mm

479AP 2-3/8 61 29.1 161 6 / 96 D

4797 2-1/2 65 29.1 172 6 / 96

4797P 2-1/2 65 29.1 172 6 / 96
4873 / 4873P

4798 4798P 1/2"

D
4873P
KT NO. Spec. g
▪ Universal joint & with ball mm
4873 1/2"F x 3/8"M 25 80 10 / 160
4873P 1/2"F x 3/8"M 25 80 10 / 160

4798
D
D1
25°
L

4798P

Overall length D D1 g
KT NO. inch mm mm mm
4798 3 74 29.1 29.1 222 6 / 96
4798P 3 74 29.1 29.1 222 6 / 96

241
 Impact Accessory
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk 7411PP 1/2"
90401 90402 1/2"
▪ Locking ring 11
PC.
▪ High tensile rubber material

90601 90602 1/2"

▪ Locking pin
▪ Chrome vanadium steel Kg
Contents 7.63 4 / 32
▪ DIN 3129
3575M E5, E6, E7, E8

4575M E10, E12, E14, E16, E18, E20

d

ℓ 4863 1/2"F x 3/8"M

90601
90401
90402
90602
Impact Socket Set
• Material - chrome molybdenum alloy steel
KT NO. Desp. Ø d / Applied to socket sizes
• Finishing - phosphate sunk
4535M ( 8~14mm ) 4535S (15/16"~9/16" )
4435M ( 8~14mm ) 4435S ( 15/16"~9/16" )

90401 ring 3.5 19

4015M ( 5~14mm ) 4015S ( 1/4"~1/2" ) 4408MP 1/2"
4055M ( 4~14mm ) 4055S ( 3/16"~1/2")
4935M (10~14mm) 4935S ( 7/16"~9/16" ) Metal case size (mm) :
4415M ( 17mm) 4575 ( E10~E18 ) 270 x 73 x 46 (0.032 cuft)
4835M (10~17mm) 8
4530M ( 8~14mm ) PC.
90601 pin 3.0 20
414A08S.4053.4063.4065.4075.4873.4015
4147.4055.4056

4535M ( 15~46mm ) 4535S ( 11/16"~1-1/4")

4435M ( 15~46mm ) 4435S ( 5/8"~1-1/4" )
4935M ( 16~30mm ) 4935S ( 11/16"~1-1/4")
90402 ring 3.5 23
4015M ( 17.19mm )
4415M ( 19.21mm )
4530M ( 15~36mm )
4575M ( E20 ) 4408MP
4835M ( 19~30mm )
Kg
90602 pin 3.0 25 Contents 1.3 1 / 20
4260.4796.4797.4863.4873.4866

4535M 10, 12, 13, 14, 17, 19, 21, 24

Impact Socket Rail Set 4408SP 1/2"

4423MP 1/2" Metal case size (mm) :
270 x 73 x 46 (0.032 cuft)
▪ Thin wall version 8
PC.
3
PC.

4408SP
Kg
Contents 4.5 48 Kg
Contents 1.3 1 / 20
4835M 17,19,21 3/8, 7/16, 1/2, 9/16, 11/16, 3/4,
4535S
13/16, 15/16

242
Impact Socket Set
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4412MP 1/2"
Metal case size (mm) :
224 x 94 x 40 (0.03 cuft) 11
PC.

Kg
Contents 1.5 1/8
10, 11, 12, 13, 14, 15, 16, 17, 18,
4535M
19, 21

4414MP 4414SP 1/2"

Metal case size (mm) :
270 x 100 x 49 (0.047 cuft)
14
PC.

4414MP 4414SP
Kg
KT NO. Contents

4414MP 10, 11, 12, 13, 14, 15, 16, 17,18, 19, 21, 22, 24, 27 1.5
4535M
1/8
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16,
4414SP 2.4
1-1/8, 1-1/4
4535S

4410MP 4410MP01 4410SP 1/2"

Metal case size (mm) : 8
246 x 103 x 38 (0.034 cuft) PC.

4410MP / 4410MP01 4410SP

Kg
KT NO. Contents 2.3 1 / 12

4410MP 12, 13, 14, 17, 19, 21, 22, 23

4435M

4410MP01 12, 13, 14, 17, 19, 21, 22, 24

4435M

4410SP 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16

4435S

243
 Impact Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4415MP 4415MP03 1/2"

Metal case size (mm) :
445 x 135 x 50 (0.021 cuft)
15
PC.

4415MP 4415MP03
Kg
KT NO. Contents 4.9 1/6

4415MP 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24, 26, 29, 32

4415MP03 4435M 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32

4416SP 1/2" 4413MP 1/2"

Metal case size (mm) : Metal case size (mm) :
445 x 135 x 50 (0.021 cuft) 270 x 73 x 46 (0.032 cuft)
14 8
PC. PC.

Kg Kg
Contents 4.8 1/6 Contents 1.5 1 / 20
3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
4835M 10, 12, 13, 14, 17, 19, 21, 24
4435S 3/4, 13/16, 7/8, 15/16, 1, 1-1/16,
1-1/8, 1-1/4

Wheel Nut Impact Socket Set

4405MX 1/2"
▪ Thin wall impact socket set with plastic sleeve
▪ Durable outer sleeve protects polished wheels and lug nuts
3
PC.
Blow case size (mm) :
149 x 132 x 45 (0.031 cuft)
Kg
Contents 0.83 1 / 16

494517MX 17 mm

494519MX 19 mm

494521MX 21 mm

244
Impact Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4406MX 1/2"
▪ Wheel nut impact socket
▪ Torque extension bar
6
Metal case size (mm) : PC.
296 x 130 x 41 (0.056 cuft)
Kg
Contents 2.13 1 / 10

494517MX 17 mm

494519MX 19 mm

494521MX 21 mm

4269-08-90 90 Nm

4269-08-B0 110 Nm

4269-08-D5 135 Nm

Impact Universal Joint Socket Set

4440MP 4440SP 1/2"
Metal case size (mm) :
318 x 147 x 46 (0.076 cuft)
10
PC.

Kg
KT NO. Contents 3.3 1/5

4440MP 10, 11, 12, 13, 14, 17, 19, 21, 22, 24
4A55M

4440SP 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16
4A55S

4450MP 4450SP 1/2"

Metal case size (mm) :
318 x 147 x 46 (0.076 cuft)
10
PC.

Kg
KT NO. Contents 2.6 1/5

4450MP 10, 11, 12, 13, 14, 17, 19, 21, 22, 24
4B55M

4450SP 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16
4B55S

245
 Impact Bit Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4407MP 1/2" 4418MP 1/2"

▪ For hex head screw ▪ For hex head screw
▪ 60mmL ▪ 60mmL
7 8
Metal case size (mm) : PC. Metal case size (mm) : PC.
198 x 105 x 32 (0.023 cuft) 198 x 105 x 32 (0.023 cuft)

Kg
Contents 1.34 1 / 20
Kg
Contents 0.94 1 / 20 H5, H6, H8, H10, H12, H14, H17,
4055M
H19
4055M H4, H5, H6, H8, H10, H12, H14

4457MP 1/2" 4417PP 1/2"

▪ For hex head screw ▪ For torx internal screw
▪ 60mmL ▪ 60mmL
7
Metal case size (mm) : PC. Metal case size (mm) : 7
244 x 118 x 37 (0.038 cuft) 198 x 105 x 32 (0.023 cuft) PC.

Kg Kg
Contents 1.44 1 / 18 Contents 0.94 1 / 20

4065M H4, H5, H6, H8, H10, H12, H14 4053 T25, T30, T40, T45, T50, T55, T60

4476MP 1/2" 4467PP 1/2"

▪ For hex head screw ▪ For torx internal screw
▪ 150mmL ▪ 100mmL
6 7
Metal case size (mm) : PC. Metal case size (mm) : PC.
244 x 118 x 37(0.038 cuft) 244 x 118 x 37 (0.038 cuft)

Kg
Contents
Kg
1.47 1 / 18 Contents 1.31 1 / 18

4075M H5, H6, H8, H10, H12, H14 4063 T25, T30, T40, T45, T50, T55, T60

246
Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

6510M 3/4" 6530M 3/4"

▪ Lightweight type ▪ DIN 3129, ISO 2725-2
▪ DIN 3121
D 1

D 2

D 1

D 2
L
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
651017M 17 29.0 38 10 50 227 8 / 96 653017M 17 29.0 44 10 50 316 6 / 48
651018M 18 30.0 38 10 50 225 8 / 96 653019M 19 32.0 44 10 50 329 6 / 48
651019M 19 32.0 38 10 50 238 8 / 96 653021M 21 35.0 44 13 50 341 6 / 48
651021M 21 35.0 38 13 50 254 8 / 96 653022M 22 36.0 44 13 50 346 6 / 48
651022M 22 36.0 38 13 50 260 8 / 96 653023M 23 37.0 44 15 50 350 6 / 48
651023M 23 37.0 38 15 50 263 8 / 96 653024M 24 38.0 44 15 50 352 6 / 48
651024M 24 38.0 38 15 50 249 8 / 96 653026M 26 40.0 44 15 53 358 6 / 48
651026M 26 38.0 38 15 53 260 6 / 48 653027M 27 42.0 44 18 53 380 6 / 48
651027M 27 42.0 38 18 53 332 6 / 48 653028M 28 44.0 44 18 53 394 6 / 48
651028M 28 44.0 38 18 53 353 6 / 48 653029M 29 45.0 44 18 53 404 6 / 48
651029M 29 45.0 38 18 53 362 6 / 48 653030M 30 46.0 44 20 53 412 6 / 48
651030M 30 46.0 38 20 53 342 6 / 48 653032M 32 48.0 44 20 57 460 6 / 36
653033M 33 50.0 44 20 57 479 6 / 36
653034M 34 51.0 44 22 57 491 6 / 36
6515M 3/4" 653035M 35 52.0 44 22 57 497 6 / 36
▪ Lightweight type 653036M 36 53.0 44 22 57 519 6 / 36
▪ DIN 3121 653038M 38 56.0 44 22 57 540 4 / 32
653040M 40 58.0 44 22 58 567 4 / 32
653041M 41 59.0 44 24 58 580 4 / 32
653042M 42 61.0 44 24 58 600 2 / 24
653046M 46 66.0 44 24 62 950 2 / 24
D 1

D 2

653063M 63 84.5 54 40 80 1343 1 / 12

653065M 65 86.5 54 43 80 1373 1 / 12
653070M 70 92.0 54 45 83 1451 1 / 12
L

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
651514M 14 25.0 38 10 50 215 8 / 96
651515M 15 26.0 38 10 50 217 8 / 96
651516M 16 27.5 38 10 50 220 8 / 96
651517M 17 29.0 38 10 50 225 8 / 96
651518M 18 30.0 38 10 50 230 8 / 96
651519M 19 32.0 38 10 50 238 8 / 96
651521M 21 35.0 38 13 50 252 8 / 96
651522M 22 36.0 38 13 50 257 8 / 96
651523M 23 37.0 38 15 50 283 8 / 96
651524M 24 38.0 38 15 50 288 8 / 96
651525M 25 38.0 38 15 53 321 8 / 96
651526M 26 38.0 38 15 53 321 6 / 48
651527M 27 42.0 38 18 53 320 6 / 48
651528M 28 44.0 38 18 53 345 6 / 48
651529M 29 45.0 38 18 53 350 6 / 48
651530M 30 46.0 38 20 53 360 6 / 48

247
 Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

6535M 3/4"
▪ DIN 3121

D 1

D 2
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm mm mm mm mm mm
653513M 13 22.0 38 16 50 208 8 / 96 653536M 36 53.0 44 22 57 519 6 / 36
653517M 17 29.0 44 10 50 316 6 / 48 653538M 38 56.0 44 22 57 540 4 / 32
653518M 18 30.0 44 10 50 324 6 / 48 653540M 40 58.0 44 22 58 567 4 / 32
653519M 19 32.0 44 10 50 329 6 / 48 653541M 41 59.0 44 24 58 580 4 / 32
653521M 21 35.0 44 13 50 341 6 / 48 653542M 42 61.0 44 24 58 616 2 / 24
653522M 22 36.0 44 13 50 346 6 / 48 653543M 43 62.0 44 24 58 636 2 / 24
653523M 23 37.0 44 15 50 350 6 / 48 653544M 44 64.0 44 24 62 676 2 / 24
653524M 24 38.0 44 15 50 352 6 / 48 653546M 46 66.0 44 24 62 717 2 / 24
653526M 26 40.0 44 15 53 358 6 / 48 653548M 48 68.0 44 26 65 925 2 / 24
653527M 27 42.0 44 18 53 380 6 / 48 653550M 50 71.0 44 26 65 955 1 / 20
653528M 28 44.0 44 18 53 394 6 / 48 653552M 52 74.0 54 30 68 1085 1 / 20
653529M 29 45.0 44 18 53 404 6 / 48 653554M 54 76.0 54 30 68 1125 1 / 20
653530M 30 46.0 44 20 53 412 6 / 48 653555M 55 77.0 54 30 70 1160 1 / 20
653531M 31 41.0 44 20 53 460 6 / 48 653557M 57 79.0 54 32 70 1198 1 / 20
653532M 32 48.0 44 20 57 460 6 / 36 653558M 58 81.0 54 32 70 1226 1 / 20
653533M 33 50.0 44 20 57 479 6 / 36 653560M 60 84.0 54 32 70 1313 1 / 20
653534M 34 51.0 44 22 57 491 6 / 36 653563M 63 84.5 54 40 80 1341 1 / 12
653535M 35 52.0 44 22 57 497 6 / 36 653565M 65 86.5 54 43 80 1358 1 / 12

6535S 3/4"
▪ ANSI/ASME B107.2
D 1

D 2

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
inch mm mm mm mm inch mm mm mm mm
653522S 11/16 29 38 10 50 225 8 / 96 653550S 1-9/16 58 44 22 58 567 4 / 32
653524S 3/4 32 38 10 50 238 8 / 96 653552S 1-5/8 59 44 24 58 580 4 / 32
653526S 13/16 35 38 13 50 252 8 / 96 653554S 1-11/16 63.5 44 25 58 636 2 / 24
653528S 7/8 36 38 13 50 257 8 / 96 653556S 1-3/4 64 44 25 62 676 2 / 24
653530S 15/16 37 38 15 50 288 8 / 96 653558S 1-13/16 66 44 25.5 62 717 2 / 24
653532S 1 38 38 15 53 320 8 / 96 653560S 1-7/8 68 44 27 65 925 2 / 24
653534S 1-1/16 42 40 18 53 325 6 / 48 653562S 1-15/16 70 44 27 65 955 1 / 20
653536S 1-1/8 44.7 40 18 53 355 6 / 48 653564S 2 72 54 28 68 1035 1 / 20
653538S 1-3/16 46 40 20 53 365 6 / 48 653566S 2-1/16 74 54 30 68 1078 1 / 20
653540S 1-1/4 48 44 20 57 460 6 / 36 653568S 2-1/8 76 54 30 68 1122 1 / 20
653542S 1-5/16 50 44 20 57 479 6 / 36 653570S 2-3/16 77 54 30.5 70 1151 1 / 20
653544S 1-3/8 52 44 22 57 497 6 / 36 653572S 2-1/4 79 54 32.5 70 1208 1 / 20
653546S 1-7/16 54 44 22 57 529 6 / 36 653574S 2-5/16 81 54 32.5 70 1245 1 / 20
653548S 1-1/2 56 44 22 57 540 4 / 32 653576S 2-3/8 84 54 33.5 70 1349 1 / 20

248
Deep Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk KT No. & D1

6435M 3/4" 6435S 3/4"

▪ DIN 3121 ▪ ANSI/ASME B107.2

D 1

D 2
D 1

D 2

L L

D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
KT NO. inch mm mm mm mm
mm mm mm mm mm
643519M 19 32 44 16 90 558 1 / 24 643524S 3/4 32 38 16 90 455 1 / 24
643521M 21 35 44 18 90 592 1 / 24 643526S 13/16 35 38 18 90 490 1 / 24
643522M 22 36 44 18 90 607 1 / 24 643528S 7/8 36 38 18 90 495 1 / 24
643523M 23 37 44 23 90 607 1 / 24 643530S 15/16 37 38 23 90 495 1 / 24
643524M 24 38 44 23 90 626 1 / 24 643532S 1 38 38 25 90 500 1 / 24
643525M 25 40 44 25 90 661 1 / 24 643534S 1-1/16 42 44 27 90 624 1 / 24
643526M 26 40 44 25 90 623 1 / 24 643536S 1-1/8 44.7 44 27 90 680 1 / 24
643527M 27 42 44 27 90 623 1 / 24 643538S 1-3/16 46 44 27 90 684 1 / 24
643528M 28 44 44 27 90 670 1 / 24 643540S 1-1/4 48 44 30 90 733 1 / 24
643529M 29 45 44 27 90 670 1 / 24 643542S 1-5/16 50 44 30 90 789 1 / 24
643530M 30 46 44 27 90 691 1 / 24 643544S 1-3/8 52 44 32 90 804 1 / 24
643532M 32 48 44 30 90 728 1 / 24 643546S 1-7/16 54 44 32 90 844 1 / 24
643533M 33 50 44 30 90 790 1 / 24 643548S 1-1/2 56 44 34 90 871 1 / 24
643534M 34 51 44 32 90 794 1 / 24 643550S 1-9/16 58 44 34 90 928 1 / 24
643535M 35 52 44 32 90 803 1 / 24 643552S 1-5/8 59 44 34 90 941 1 / 24
643536M 36 53 44 32 90 809 1 / 24 643554S 1-11/16 63.5 44 38 95 1111 1 / 10
643538M 38 56 44 34 90 882 1 / 24 643556S 1-3/4 64 44 38 95 1168 1 / 10
643540M 40 58 44 34 90 928 1 / 24 643558S 1-13/16 66 44 38 95 1241 1 / 10
643541M 41 59 44 34 90 938 1 / 24 643560S 1-7/8 68 54 40 95 1397 1 / 10
643542M 42 61 44 36 95 1074 1 / 24 643562S 1-15/16 70 54 40 95 1448 1 / 10
643543M 43 62 44 38 95 1103 1 / 10 643564S 2 72 54 40 95 1521 1 / 10
643544M 44 64 44 38 95 1180 1 / 10
643546M 46 66 44 38 95 1210 1 / 10
643548M 48 68 44 40 95 1391 1 / 10
643550M 50 71 44 40 95 1479 1 / 10
643555M 55 77 54 45 100 1810 1 / 10
643560M 60 84.5 54 50 100 2010 1/6
643565M 65 86.5 54 54 100 1990 1/6

249
 Thin Wall Impact Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

6835M 3/4"
▪▪DIN 3121
KT NO. D1 D2 ℓ L g
mm mm mm mm mm
683517M 17 28.0 44 16 60 320 6 / 48

D2
D1
683519M 19 30.0 44 16 60 348 6 / 48
683521M 21 33.0 44 18 60 355 6 / 48
683522M 22 34.0 44 18 60 362 6 / 48 L

683523M 23 35.0 44 23 60 370 6 / 48

683524M 24 36.5 44 23 60 378 6 / 48
683526M 26 39.0 44 25 80 400 1 / 24
683527M 27 40.0 44 26 80 424 1 / 24
683529M 29 43.0 44 26 80 460 1 / 24
683530M 30 44.0 44 26 80 478 1 / 24
683532M 32 46.5 44 26 80 512 1 / 24

6935M 3/4" 6935S 3/4"

▪▪DIN 3121 ▪▪ANSI/ASME B107.2
D1

D2

D1

D2
l
l
L
L

KT NO. D1 D2 ℓ L g D1 D2 ℓ L g
mm mm mm mm mm KT NO. inch mm mm mm mm
693519M 19 30.0 44 16 90 562 1 / 24 693524S 3/4 30.0 38 16 90 370 1 / 24
693521M 21 33.0 44 18 90 597 1 / 24 693526S 13/16 33.0 38 18 90 380 1 / 24
693522M 22 34.0 44 18 90 612 1 / 24 693528S 7/8 34.0 38 18 90 385 1 / 24
693523M 23 35.0 44 23 90 614 1 / 24 693530S 15/16 36.5 38 23 90 415 1 / 24
693524M 24 36.5 44 23 90 619 1 / 24 693532S 1 38.0 38 23 90 500 1 / 24
693526M 26 39.0 44 25 90 629 1 / 24 693534S 1-1/16 40.0 44 25 90 654 1 / 24
693527M 27 40.0 44 27 90 631 1 / 24 693536S 1-1/8 43.0 44 25 90 680 1 / 24
693529M 29 43.0 44 27 90 672 1 / 24 693538S 1-3/16 44.0 44 27 90 684 1 / 24
693530M 30 44.0 44 27 90 693 1 / 24 693540S 1-1/4 46.5 44 30 90 733 1 / 24
693532M 32 46.5 44 30 90 733 1 / 24

Impact Star Socket

6575M 3/4"
▪▪For torx external screw
▪▪DIN 3121

KT NO. D1 D2 ℓ L g
Size mm mm mm mm
D1

657524M E24 32.5 44.0 17.0 50 382 6 / 48

D2

657526M E26 35.0 44.0 19.0 60 403 6 / 48 l

L
657528M E28 36.5 44.0 25.5 60 414 6 / 48
657530M E30 37.5 44.0 27.0 65 460 1 / 24
657532M E32 39.5 44.0 29.0 65 470 1 / 24

250
Deep Impact Star Socket
6475M 3/4"
▪ For torx external screw
▪ DIN 3121
▪ For the operation of cylinder head bolts
▪ E-18 on MAN commercial vehicles M 2000 and
MAN busses with D 08 engines
▪ E-20 on MAN commercial vehicles F 2000, F 90, F
8 and MAN busses with D 25 and D 28 engines
▪ E-24 on MAN commercial vehicles Common Rail

D 2
D 1
engines (D20)
KT NO. D1 D2 ℓ L g
l
L
Size mm mm mm mm
647518M E18 26.5 44.0 12.5 110 635 1 / 10
647520M E20 29.0 44.0 14.0 110 680 1 / 10
647522M E22 31.0 44.0 15.0 110 700 1 / 10
647524M E24 32.5 44.0 17.0 110 736 1 / 10

Rear Wheel Socket • Material - chrome molybdenum alloy steel

• Finishing - phosphate sunk
KT No. & D1

6514M 3/4"
▪ 4 points
▪ DIN 3121
KT NO. D1 D2 ℓ L g
Size mm mm mm mm
D 1

D 2
651417M 17 39.8 34 28 53 350 1 / 24
651419M 19 39.8 34 28 53 332 1 / 24
651420M 20 41.8 36 28 53 377 1 / 24 l

651421M 21 41.8 36 28 53 370 1 / 24 L

Impact Bit Socket

6015M 3/4" 609616MxxH 609622MxxH 3/4"
▪ Hexagon head ▪ DIN 3121
▪ DIN 3121

609616MxxH
S

609622MxxH
L Max. torq g S L Max. torq
KT NO. KT NO. g
mm mm Nm mm mm (mm) Nm
601514M H14 87 684 325 2 / 48 609616M10H H10 16 77 264 416 4 / 40
601517M H17 87 1136 343 2 / 48 609616M12H H12 16 77 480 422 4 / 40
601519M H19 87 1577 365 2 / 48 609616M14H H14 16 77 684 430 4 / 40
601521M H21 87 2134 490 1 / 24 609616M17H H17 16 77 880 443 4 / 40
601522M H22 87 2436 522 1 / 24 609616M19H H19 16 77 880 450 4 / 40
601524M H24 87 3190 555 1 / 24 609616M22H H22 16 77 880 473 4 / 40
601527M H27 87 4535 604 1 / 24 609622M19H H19 22 93 1577 670 1 / 24
609622M22H H22 22 93 2436 692 1 / 24
609622M24H H24 22 93 2436 706 1 / 24
609622M27H H27 22 93 2436 730 1 / 24
609622M30H H30 22 93 2436 744 1 / 24
609622M32H H32 22 93 2436 783 1 / 24

251
 • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

Impact Bit Socket Impact Accessory

1740 609616M 3/4" 6260 6260P 3/4"
▪ Hex bit & bit holder ▪ Extension bar & with ball
▪ DIN 3121 ▪ DIN 3121

6260

6260P
Overall length g
KT NO.
1740 609616M inch mm
6260-04 4 100 577 2 / 20
6260-07 7 175 867 2 / 20
6260-10 10 250 1155 1 / 16
3 0

S L
1 6
6260-13 13 330 1423 1 / 10
1 6 L
6260-04P 4 100 577 2 / 20
S L Max. torq 6260-07P 7 175 867 2 / 20
KT NO. g
mm mm Nm 6260-10P 10 250 1155 1 / 16
174010H H10 40 264 46 20 / 400 6260-13P 13 330 1423 1 / 10
174012H H12 40 480 52 20 / 400
174014H H14 40 684 60 20 / 200 6797 6797P 3/4"
174017H H17 40 880 73 20 / 200 ▪ Universal joint & with ball
174019H H19 40 880 80 20 / 200 ▪ DIN 3121
174022H H22 40 880 97 12 / 120
609616M 16 52 - 370 6 / 48
L

6797
1954 609622M 3/4" 25°
D

▪ Hex bit & bit holder

▪ DIN 3121
6797P

Overall length D g
KT NO. inch mm mm
6797 4-1/2 114 44 742 2 / 20
6797P 4-1/2 114 44 742 2 / 20
609622M
1954XXH
6798 6798P 3/4"
4 4

S L 2 2 2 2 L
▪ Universal joint & with ball
▪ DIN 3121

L
S L 2 2
195404R 6798
D
D1
S L Max. torq g 25°
KT NO. mm mm Nm
195419H H19 54.5 1577 140 12 / 120
195422H H22 54.5 2436 162 12 / 120
6798P
195424H H24 54.5 2436 176 10 / 100
195427H H27 54.5 2436 200 10 / 100 Overall length D D1 g
KT NO.
195430H H30 54.5 2436 232 6 / 60 inch mm (mm) (mm)
195432H H32 54.5 2436 243 6 / 60 6798 4-1/4 108 44 44 736 2 / 20
609622M 22 60.0 - 530 6 / 48 6798P 4-1/4 108 44 44 736 2 / 20
195404R 1/2"M 54.5 - 135 12 / 120

252
Impact Accessory • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk
KT No. & D1

6864 6864P 6874 6874P 3/4"

6868 6868P 3/4" ▪ Adapter & with ball
▪ Convert to 1/2" drive
▪ Adapter & with ball ▪ 6874 → Max. torque:768 Nm
▪ Convert to 1/2" drive ▪ DIN 3121
▪ 6864 → Max. torque:768 Nm
▪ DIN 3121
44mm

6864 / 6864P 6874 6874P

6864 &6868
6868 / 6868P D
KT NO. Spec. g
(mm)
6874 3/4"F x 1/2"M 38 255 6 / 48
38mm

6874P 3/4"F x 1/2"M 38 255 6 / 48

6874 / 6874P 6864P &6868P

KT NO. Spec. g

6864 3/4"F x 1/2"M 313 6 / 48

6868 3/4"F x 1"M 413 6 / 48
6864P 3/4"F x 1/2"M 313 6 / 48
6868P 3/4"F x 1"M 413 6 / 48

90403 90404 90405 3/4"

▪ Locking ring
▪ High tensile rubber material

90603 90604 90607 3/4"

▪ Locking pin
▪ Chrome vanadium steel
▪ DIN 3129

KT NO. Desp. Ø d/ Applied to socket sizes

90403 ring 3.5 33 6015M (14~19mm) 6435S (3/4"~1")

6510M (17~30mm) 6535S (11/16"~1-3/16")
6515M (17~30mm) 6935S (3/4"~1") d
ℓ
90607 pin 3.0 30 6874

6535M (17~46mm) 6535S (1-1/4" ~1-13/16")

90404 ring 5.5 37 6435M (19~46mm) 6435S (1-1/16"~1-13/16") 90603
6935M (19~32mm) 6935S (1-1/16"~1-1/4") 90604
6015M (21~27mm) 6260.6797.6798.6864 90607 90403
90603 pin 4.0 35 6530M (17~46mm) 6868 90404
6835M (17~32mm) 90405
609616M.609622M
90405 ring 5.5 44
6535M (48~65mm) 6535S (1-7/8" ~ 2-3/8")
6435M (48~50mm) 6435S (1-7/8" ~ 2")
90604 pin 4.0 45

253
 Impact Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

6408MP 6408MP10 6408SP10 3/4"

Metal case size (mm) :
241 x 124 x 68 (0.07 cuft)
8
PC.

6408SP10 6408MP / 6408MP10

Kg
KT NO. Contents

6408MP 19, 22, 24, 27, 30, 32, 36, 38 3.9

6535M

19, 22, 24, 27, 30

6408MP10 6515M 3.5 1/6
32, 36, 38
6535M
6408SP10 3/4, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4, 1-7/16, 1-1/2 3.5
6535S

6409MP 6409MP03 6409MP10 6409SP10 3/4"

Metal case size (mm) :
445 x 100 x 65 (0.10 cuft)

8
PC.

6409MP / 6409MP03 / 6409MP10 6409SP10

Kg
KT NO. Contents

6409MP 26, 29, 30, 32, 34, 35, 36, 38 4.7

6535M

6409MP03 21, 22, 24, 27, 30, 32, 36, 41 4.7

6535M

26, 29, 30 1/2

6515M
6409MP10 4.6
32, 34, 35, 36, 38
6535M

6409SP10 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 4.6

6535S

254
Impact Socket Set • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

6410MP 6410SP 3/4"

Metal case size (mm) :
445 x 100 x 65 (0.10 cuft)
8
PC.

6410MP 6410SP
Kg
KT NO. Contents 7.1 1/2

6410MP 26, 29, 30, 32, 34, 35, 36, 38

6435M

6410SP 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2

6435S

Impact Bit Socket Set

6411MP 3/4"
Metal case size (mm) :
270 x 100 x 49 (0.048 cuft)
11
Kg PC.
Contents 1.5 1/8

6096M 16, 22

1740 H10, H12, H14, H17

1954 H19, H22, H24, H27, H32

255
 Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

8535M 1" 8535S 1"

▪ DIN 3129, ISO 2725-2 ▪ ANSI/ASME B107.2
D 1

D 1
D 2

D 2
l l

L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
853519M 19 35 54 15 58 508 1 / 24 853524S 3/4 35 54 15 58 508 1 / 24
853521M 21 37 54 15 58 529 1 / 24 853526S 13/16 37 54 15 58 529 1 / 24
853522M 22 38 54 15 58 520 1 / 24 853528S 7/8 38 54 15 58 520 1 / 24
853523M 23 39 54 17 58 542 1 / 24 853530S 15/16 41 54 17 58 529 1 / 24
853524M 24 41 54 17 58 529 1 / 24 853532S 1 42 54 17 58 567 1 / 24
853525M 25 42 54 17 58 567 1 / 24 853534S 1-1/16 44 54 19 58 538 1 / 24
853526M 26 43 54 19 58 558 1 / 24 853536S 1-1/8 47 54 19 58 600 1 / 24
853527M 27 44 54 19 58 538 1 / 24 853538S 1-3/16 48 54 20 60 592 1 / 24
853528M 28 45 54 19 58 538 1 / 24 853540S 1-1/4 51 54 20 62 679 1 / 24
853529M 29 47 54 19 58 600 1 / 24 853542S 1-5/16 52 54 20 62 700 1 / 24
853530M 30 48 54 20 60 592 1 / 24 853544S 1-3/8 54 54 20 62 779 1 / 24
853532M 32 51 54 20 62 679 1 / 24 853546S 1-7/16 56 54 20 65 729 1 / 24
853533M 33 52 54 20 62 700 1 / 24 853548S 1-1/2 58 54 22 65 742 1 / 24
853534M 34 53 54 20 62 766 1 / 24 853550S 1-9/16 60 54 22 65 800 1 / 24
853535M 35 54 54 20 62 779 1 / 24 853552S 1-5/8 61 54 22 70 846 1 / 24
853536M 36 56 54 20 65 729 1 / 24 853554S 1-11/16 64 54 22 70 890 1 / 20
853537M 37 56 54 22 65 706 1 / 24 853556S 1-3/4 67 54 26 70 1000 1 / 20
853538M 38 58 54 22 65 742 1 / 24 853558S 1-13/16 68 54 26 75 1075 1 / 20
853540M 40 60 54 22 65 800 1 / 24 853560S 1-7/8 70 54 26 75 1085 1 / 20
853541M 41 61 54 22 70 846 1 / 24 853562S 1-15/16 72 54 26 75 1140 1 / 20
853542M 42 64 54 22 70 890 1 / 20 853564S 2 74 54 30 75 1235 1 / 20
853544M 44 67 54 26 70 1000 1 / 20 853566S 2-1/16 75 54 30 80 1300 1 / 12
853545M 45 67 54 26 70 953 1 / 20 853568S 2-1/8 78 54 30 80 1400 1 / 12
853546M 46 68 54 26 75 1075 1 / 20 853570S 2-3/16 79 54 32 83 1433 1 / 12
853548M 48 70 54 26 75 1085 1 / 20 853572S 2-1/4 82 54 32 83 1500 1 / 12
853550M 50 73 54 26 75 1170 1 / 20 853574S 2-5/16 83 54 32 83 1542 1 / 12
853552M 52 75 54 30 80 1300 1 / 12 853576S 2-3/8 86 54 32 87 1758 1 / 12
853553M 53 76 54 30 80 1300 1 / 12 853578S 2-7/16 88 54 34 87 1760 1 / 12
853554M 54 78 54 30 80 1400 1 / 12 853580S 2-1/2 90 54 34 87 1750 1 / 12
853555M 55 79 54 32 83 1433 1 / 12 853582S 2-9/16 92 54 34 90 1758 1 / 12
853558M 58 83 54 32 83 1542 1 / 12 853584S 2-5/8 94 54 34 90 1966 1 / 12
853560M 60 86 54 32 87 1758 1 / 12 853586S 2-11/16 95 54 34 90 1966 1 / 12
853563M 63 90 54 34 87 1750 1 / 12 853588S 2-3/4 97 54 34 93 2112 1/8
853565M 65 92 54 34 90 1758 1 / 12 853590S 2-13/16 99 86 36 93 2925 1/8
853566M 66 94 54 34 90 1966 1 / 12 853592S 2-7/8 102 86 36 93 3050 1/8
853568M 68 95 54 34 90 1966 1 / 12 853594S 2-15/16 104 86 36 95 3188 1/8
853570M 70 97 54 34 93 2112 1/8 853596S 3 106 86 36 95 3205 1/8
853571M 71 99 86 36 93 2925 1/8 8535A0S 3-1/8 110 86 43 95 3350 1/4
853575M 75 104 86 36 95 3188 1/8 8535A4S 3-1/4 112 86 43 95 3300 1/4
853580M 80 110 86 43 95 3350 1/4 8535A8S 3-3/8 117 86 43 100 3550 1/4
853585M 85 115 86 43 95 3250 1/4 8535B2S 3-1/2 122 86 43 100 3950 1/4
853590M 90 122 86 43 100 3950 1/4
853595M 95 130 95 52 105 4290 1/2
8535A0M 100 136 95 51 105 4600 1/2

256
Standard Impact Socket • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

8530S 1"
▪ ANSI/ASME B107.2

KT NO. D1 D2 ℓ L g
inch mm mm mm mm
853024S 3/4 35 54 15 58 508 1 / 24
853030S 15/16 37 54 15 58 529 1 / 24

D 2
D 1
853032S 1 42 54 17 58 567 1 / 24
853036S 1-1/8 47 54 19 58 600 1 / 24 l
853040S 1-1/4 51 54 20 62 679 1 / 24 L

853044S 1-3/8 54 54 20 62 779 1 / 24

853046S 1-7/16 56 54 20 65 729 1 / 24
853054S 1-11/16 64 54 22 70 890 1 / 20
853056S 1-3/4 67 54 26 70 1000 1 / 20
853066S 2-1/16 75 54 30 80 1300 1 / 12
853072S 2-1/4 82 54 32 83 1500 1 / 12
853076S 2-3/8 86 54 32 87 1758 1 / 12

Deep Impact Socket • Material - chrome molybdenum alloy steel

• Finishing - phosphate sunk

8435M 1" 8435S 1"

▪ DIN 3121 ▪ ANSI/ASME B107.1
D 1

D 2

D 1

D 2

l
l
L
L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
843524M 24 41 54 25 90 850 1 / 24 843530S 15/16 40.8 54 25 90 850 1 / 24
843527M 27 44 54 25 90 879 1 / 24 843532S 1 42 54 25 90 860 1 / 24
843528M 28 45 54 25 90 892 1 / 24 843534S 1-1/16 44 54 25 90 879 1 / 24
843530M 30 48 54 28 90 916 1 / 24 843536S 1-1/8 46.3 54 25 90 900 1 / 24
843532M 32 51 54 28 90 979 1 / 24 843538S 1-3/16 48 54 28 90 916 1 / 24
843533M 33 52 54 28 92 1016 1 / 24 843540S 1-1/4 51 54 28 90 979 1 / 24
843534M 34 53 54 28 92 1029 1 / 24 843542S 1-5/16 52 54 28 92 1016 1 / 24
843535M 35 54 54 28 92 1016 1 / 24 843544S 1-3/8 54 54 28 92 1016 1 / 24
843536M 36 56 54 32 92 1033 1 / 24 843546S 1-7/16 56 54 32 92 1033 1 / 24
843538M 38 58 54 32 92 1025 1 / 24 843548S 1-1/2 58 54 32 92 1025 1 / 24
843540M 40 60 54 32 92 1075 1 / 24 843550S 1-9/16 60 54 32 92 1075 1 / 24
843541M 41 61 54 32 92 1083 1 / 24 843552S 1-5/8 61 54 32 92 1083 1 / 24
843542M 42 64 54 32 92 1100 1 / 24 843554S 1-11/16 64 54 32 92 1100 1 / 24
843546M 46 68 54 35 95 1137 1 / 10 843556S 1-3/4 67 54 32 92 1120 1 / 12
843548M 48 70 54 35 95 1400 1 / 10 843558S 1-13/16 68 54 35 95 1137 1 / 12
843550M 50 73 54 35 95 1518 1 / 10 843560S 1-7/8 70 54 35 95 1400 1/6
843552M 52 75 54 40 100 1637 1/6 843562S 1-15/16 72 54 35 95 1480 1/6
843554M 54 78 54 40 100 1750 1/6 843564S 2 74 54 35 95 1577 1/6
843555M 55 79 54 40 100 1862 1/6 843566S 2-1/16 75 54 40 100 1637 1/6
843558M 58 83 54 42 100 1925 1/6 843568S 2-1/8 78 54 40 100 1750 1/6
843560M 60 86 54 42 100 2050 1/6 843570S 2-3/16 79 54 40 100 1862 1/6
843565M 65 92 54 50 110 2663 1/6 843572S 2-1/4 82 54 42 100 1900 1/6
843570M 70 97 54 59 110 2921 1/6

257
 • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

Thin Wall Impact Socket Rear Wheel Socket

8835M 1" 8534M 1"
▪ Thin wall version ▪ 4 points
▪ 6 points ▪ DIN 3121
▪ Metric size
▪ DIN 3121

D 2
D 1
D 1

D 2

l
L
l
L

D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
KT NO. SQ mm mm mm mm
mm mm mm mm mm
883524M 24 38.0 54 26 80 626 1 / 24 853417M 17 38.0 54 23.5 76 628 1 / 24
883527M 27 42.0 54 26 80 643 1 / 24 853419M 19 43.0 54 23.5 76 682 1 / 24
883529M 29 44.0 54 26 80 700 1 / 24 853421M 21 47.0 54 23.5 76 733 1 / 24
883530M 30 46.0 54 30 80 696 1 / 24
883532M 32 48.0 54 30 80 714 1 / 24 8545M 1"
883533M 33 49.0 54 30 80 748 1 / 24
▪ DIN 3121
883534M 34 50.0 54 30 80 764 1 / 24
▪ 17SQ x35MM Isuzu, Mitsubishi, Nissan,
883535M 35 52.0 54 32 80 776 1 / 24
Mazda
883536M 36 53.0 54 32 80 779 1 / 24
▪ 19SQ x41MM Mazda
883538M 38 56.0 54 32 80 810 1 / 24
▪ 20SQ x38MM Hino, Toyota, Daihatsu
883541M 41 59.5 54 32 80 866 1 / 24
▪ 20SQ x41MM Hino, Toyota, Daihatsu
▪ 21SQ x41MM Scania, Isuzu, Hino,
Mitsubishi, Nissan
Rear Wheel Socket
8514M 8514S 8524M 1"
D 1

D 2

▪ 4 points
▪ DIN 3121
L
Use for
D 1

D 2

l 8514M O u te r W h e e l In n e r W h e e l
L deep version
8514M
D 1

D 2

S o c k e t
H u b S o c k e t
O u te r N u t
l
L
In n e r N u t

8524M 8524M 8514S

The wheel nut socket fits onto both outer nut and inner nut

KT NO. D1 D2 ℓ L g D1 D2 ℓ L
SQ mm mm mm mm KT NO. g
SQ mm mm mm mm mm
851417M 17 40.0 54 30.0 60 618 1 / 24 85451735M 17 x 35 54 54 13 83 1042 1 / 24
851419M 19 42.0 54 30.0 60 618 1 / 24 85451941M 19 x 41 55 54 14 83 985 1 / 24
851420M 20 43.0 54 30.0 60 621 1 / 24 85452038M 20 x 38 58 54 14 87 1099 1 / 24
851421M 21 44.0 54 30.0 60 621 1 / 24 85452041M 20 x 41 58 54 14 87 1086 1 / 24
851422M 22 45.5 54 30.0 60 621 1 / 24 85452141M 21 x 41 58 54 14 87 1071 1 / 24
852421M 21 44.0 48 30.0 60 621 1 / 24
851426S 13/16 44 54 30.0 60 625 1 / 24

258
 • Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

Impact Bit Socket Impact Accessory

8015M 1" 8260 8260P 1"
▪▪Hexagon head ▪▪Extension bar & with ball
▪▪DIN 3121 ▪▪DIN 3121

8260

L
KT NO. g
8260P
mm mm
801519M H19 75 860 1 / 24 Overall Length g
KT NO. inch mm
8260-07 7 175 1393 1 / 12
1954 809622M 8260-10 10 250 1891 1 / 12
▪▪Hex bit & bit holder 8260-13 13 330 2455 1/8
▪▪DIN 3121 8260-07P 7 175 1393 1 / 12
8260-10P 10 250 1891 1 / 12
8260-13P 13 330 2455 1/8

8797 8797P 1"

1954 809622M ▪▪Universal joint & with ball
▪▪DIN 3121
38

S L 8797
22 22
L
D
S L Max. torq g
KT NO. 25°
mm mm Nm
195419H H19 54.5 1577 140 12 / 120
195422H H22 54.5 2436 162 12 / 120 8797P
195424H H24 54.5 2436 176 10 / 100
Overall Length D g
195427H H27 54.5 2436 200 10 / 100 KT NO. inch mm mm
195430H H30 54.5 2436 232 6 / 60 8797 5 125 60 1530 1 /18
195432H H32 54.5 2436 243 6 / 60 8797P 5 125 60 1530 1 /18
809622M 22 58.0 - 756 1 / 24

8866 8866P 1"

809622MxxH 1"
▪▪Adapter & with ball
▪▪Hexagon head ▪▪Convert to 3/4" drive
▪▪DIN 3121 ▪▪Max. torque:2118 Nm
▪▪DIN 3121

8866
S
L

S L Max. torq
KT NO. g
mm mm (mm) Nm
809622M19H H19 22 93 1577 896 1 / 10 8866P
809622M22H H22 22 93 2436 918 1 / 10 g
KT NO. Spec.
809622M24H H24 22 93 2436 932 1 / 10
809622M27H H27 22 93 2436 956 1 / 10 8866 1"F x 3/4"M 562 4 / 32
809622M30H H30 22 93 2436 988 1 / 10 8866P 1"F x 3/4"M 562 4 / 32
809622M32H H32 22 93 2436 999 1 / 10

259
 Impact Accessory
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

8869 8869P 1"

▪ Adapter & with ball
▪ Convert to 1-1/2" drive
▪ DIN 3121
KT NO. Spec. g

8869 1" F x 1-1/2"M 963 1 / 24

8869P 1" F x 1-1/2"M 963 1 / 24 8869 8869P

90405 90406
▪ Locking ring
▪ High tensile rubber material

90605 90606 1"

▪ Locking pin
▪ Chrome vanadium steel
▪ DIN 3129
KT NO. Desp. Ø d/ Applied to socket sizes

90405 ring 5.5 44

8535M ( 19~70mm ) 8535S ( 3/4"~2-3/4" )
8435M ( 24~60mm ) 8435S ( 15/16"~2-1/4" ) d
90605 pin 5.0 45
8835M ( 24~60mm )
8514M.8514S.8534M.806519M ℓ
8260.8797.8866.8869
90406 ring 10 75 90605
8535M (71~90mm) 8535S (2-13/16"~3-1/2") 90606
90405
90606 pin 5.0 75 90406

Impact Socket Set

8410MP 8410SP 1"
Metal case size (mm) :
280 x 130 x 74 (0.095 cuft)
8
PC.

8410MP 8410SP
Kg
KT NO. Contents 6.4 1/4

8410MP 24, 27, 30, 32, 33, 36, 38, 41

8535M

8410SP 15/16, 1-1/16, 1-3/16, 1-1/4, 1-5/16, 1-7/16, 1-1/2, 1-5/8

8535S

260
Impact Socket Set
8409MP 1"
Metal case size (mm) :
445 x 100 x 65 (0.104 cuft)
8
PC.

Kg
Contents 7.82 1/2

8435M 24, 27, 30, 32, 33, 36, 38, 41

8408MP 1"
▪ 6 PC. thin wall version
▪ 2 PC. rear wheel 8
Metal case size (mm) : PC.
445 x 120 x 68 (0.128 cuft)
Kg
Contents 6.9 1/2

8835M 24, 27, 32, 36, 38, 41

8534M 17, 21

8408MP02 1"
▪ 6 PC. thin wall deep version
▪ 2 PC. rear wheel, square
8
PC.
Metal case size (mm) :
445 x 120 x 68 (0.128 cuft)
Kg
Contents 6.9 1/2

8835M 24, 27, 32, 36, 38, 41

8534M 19, 21

Impact Accessory
9260 9260P 1-1/2" 9868 9868P 1-1/2"
▪ Extension bar & with ball ▪ Adapter & with ball
▪ DIN 3121 ▪ Convert to 1" drive
▪ Max. → torque:2515 Nm
▪ DIN 3121

9260

9260P
Overall length g
KT NO. 9868 9868P
inch mm
9260-13 13 330 5900 1/4
9260-13P 13 330 5900 1/4 KT NO. Spec. g

9868 1-1/2" F x 1"M 2360 1/6

9868P 1-1/2" F x 1"M 2360 1/6

261
 Standard Impact Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

9535M 1-1/2" 9535S 1-1/2"

▪ DIN 3129 ▪ ANSI/ASME B107.1

D1

D2
D1

D2

ℓ
L

ℓ
L
KT NO. D1 D2 ℓ L g
inch mm mm mm mm

KT NO. D1 D2 ℓ L g 953564S 2 81 86 35 85 2400 1/6

mm mm mm mm mm 953566S 2-1/16 82 86 36 85 3075 1/6
953532M 32 56 86 23 80 1945 1/6 953568S 2-1/8 84 86 36 90 3214 1/6
953533M 33 57 86 23 80 1935 1/6 953570S 2-3/16 85 86 43 93 3204 1/6
953534M 34 58 86 24 80 1947 1/6 953572S 2-1/4 87 86 43 93 3205 1/6
953536M 36 62 86 26 80 1905 1/6 953574S 2-5/16 89 86 43 93 3263 1/6
953538M 38 64 86 26 80 2002 1/6 953576S 2-3/8 90 86 45 95 2950 1/6
953541M 41 68 86 28 80 2125 1/6 953578S 2-7/16 93 86 44 95 3426 1/6
953542M 42 70 86 28 80 2295 1/6 953580S 2-1/2 95 86 46 97 3547 1/6
953546M 46 73 86 30 85 2233 1/6 953582S 2-9/16 96 86 49 100 3617 1/6
953550M 50 78 86 32 85 2300 1/6 953584S 2-5/8 99 86 48 100 3780 1/6
953555M 55 85 86 36 93 2660 1/6 953586S 2-11/16 101 86 48 100 3842 1/6
953560M 60 90 86 40 95 2840 1/6 953588S 2-3/4 103 86 48 103 4080 1/6
953565M 65 96 86 42 100 3150 1/6 953590S 2-13/16 105 86 50 105 4192 1/6
953570M 70 103 86 46 103 3460 1/6 953592S 2-7/8 107 86 50 105 3600 1/6
953575M 75 108 86 48 105 3700 1/4 953594S 2-15/16 108 86 50 105 3700 1/6
953580M 80 115 86 52 105 3900 1/4 953596S 3 111 86 50 105 4465 1/4
953585M 85 121 86 55 110 4175 1/4 953598S 3-1/16 114 86 52 105 4577 1/4
953590M 90 127 86 58 110 4600 1/4 9535A0S 3-1/8 116 86 53 105 4689 1/4
953595M 95 134 127 50 110 7570 1/1 9535A2S 3-3/16 118 86 53 105 4746 1/4
9535A0M 100 140 127 53 115 8104 1/1 9535A4S 3-1/4 120 86 54 105 4829 1/4
9535A5M 105 146 127 53 115 8340 1/1 9535A6S 3-5/16 122 86 56 105 4879 1/4
9535B0M 110 152 127 56 125 9400 1/1 9535A8S 3-3/8 123 86 56 105 4870 1/4
9535B5M 115 160 127 60 125 9766 1/1 9535B0S 3-7/16 125 86 57 105 4954 1/4
9535C0M 120 166 127 62 130 10460 1/1 9535B2S 3-1/2 129 86 60 110 5442 1/4
9535C5M 125 172 127 65 135 11148 1/1 9535B4S 3-9/16 130 86 60 110 5435 1/4
9535D0M 130 180 127 68 140 12423 1/1 9535B6S 3-5/8 131 86 60 110 5435 1/4
9535D5M 135 185 127 70 145 13090 1/1 9535B8S 3-11/16 133 86 62 113 5468 1/1
9535E0M 140 190 127 75 150 13570 1/1 9535C0S 3-3/4 136 127 62 113 8147 1/1
9535F0M 150 200 127 80 155 14270 1/1 9535C2S 3-13/16 138 127 64 120 9098 1/1
9535C4S 3-7/8 139 127 66 120 8954 1/1
9535C6S 3-15/16 140 127 66 120 8931 1/1
9535C8S 4 142 127 66 120 8104 1/1
9535D0S 4-1/16 143 127 68 120 8914 1/1
9535D2S 4-1/8 146 127 68 120 8340 1/1
9535D4S 4-3/16 146 127 70 120 8917 1/1
9535D6S 4-1/4 150 127 72 124 9400 1/1
9535D8S 4-5/16 154 127 72 124 10026 1/1
9535E0S 4-3/8 155 127 72 124 9999 1/1
9535E2S 4-7/16 155 127 75 128 10112 1/1
9535E4S 4-1/2 159 127 75 128 9766 1/1
9535E8S 4-5/8 164 127 79 132 13730 1/1
9535F2S 4-3/4 167 127 79 132 11148 1/1
9535F6S 4-7/8 171 127 79 136 12423 1/1
9535G0S 5 174 127 79 140 13090 1/1
9535G4S 5-1/8 180 127 80 143 13896 1/1
9535G8S 5-1/4 184 127 80 145 13570 1/1
9535J2S 6 203 127 85 165 14270 1/1

262
Standard Impact Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

A535M 2-1/2" A535S 2-1/2"

▪ DIN 3129 ▪ ANSI/ASME B107.1
D1

D2

D1

D2
ℓ ℓ
L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
A535041M 41 78 127 39 115 5985 1/4 A535076S 2-3/8 100 127 45 125 6892 1/2
A535046M 46 83 127 39 115 5971 1/4 A535078S 2-7/16 103 127 45 125 6937 1/2
A535050M 50 88 127 39 115 6050 1/4 A535080S 2-1/2 103 127 48 125 6855 1/2
A535051M 51 89 127 39 115 6064 1/4 A535082S 2-9/16 105 127 48 125 6901 1/2
A535055M 55 94 127 42 115 6148 1/4 A535084S 2-5/8 107 127 50 125 6944 1/2
A535057M 57 96 127 42 115 6180 1/4 A535088S 2-3/4 110 127 50 125 6935 1/2
A535060M 60 100 127 45 125 6878 1/2 A535090S 2-13/16 115 127 50 125 7046 1/2
A535065M 65 105 127 48 125 6901 1/2 A535094S 2-15/16 115 127 55 125 7165 1/2
A535070M 70 110 127 50 125 6933 1/2 A535096S 3 120 127 55 125 7203 1/2
A535075M 75 115 127 55 125 7148 1/2 A535100S 3-1/8 123 127 57 125 7262 1/2
A535076M 76 120 127 55 125 7143 1/2 A535108S 3-3/8 127 127 60 130 7486 1/2
A535077M 77 120 127 55 125 7156 1/2 A535112S 3-1/2 135 127 65 130 7988 1/2
A535080M 80 123 127 57 125 7229 1/2 A535120S 3-3/4 140 127 70 140 8561 1/2
A535085M 85 127 127 60 130 7549 1/2 A535124S 3-7/8 145 127 70 140 8651 1/2
A535086M 86 127 127 60 130 7470 1/2 A535126S 3-15/16 145 127 70 140 8767 1/2
A535090M 90 135 127 65 130 7906 1/2 A535132S 4-1/8 155 127 70 142 9910 1/2
A535095M 95 140 127 70 140 8564 1/2 A535136S 4-1/4 160 127 75 155 11749 1/2
A535100M 100 145 127 70 140 9084 1/2 A535138S 4-5/16 160 127 75 155 12526 1/2
A535105M 105 155 127 70 142 10189 1/2 A535144S 4-1/2 165 127 78 155 12614 1/2
A535110M 110 160 127 76 155 11511 1/2 A535148S 4-5/8 175 127 80 160 19181 1/1
A535115M 115 165 127 78 155 18390 1/2 A535156S 4-7/8 180 127 82 165 19876 1/1
A535120M 120 175 127 80 160 18991 1/1 A535160S 5 185 127 82 165 20029 1/1
A535125M 125 180 127 82 165 19874 1/1 A535164S 5-1/8 185 127 85 170 20425 1/1
A535130M 130 185 127 85 170 20649 1/1 A535168S 5-1/4 190 127 90 175 21817 1/1
A535135M 135 190 127 90 175 21751 1/1 A535172S 5-3/8 200 127 95 180 23903 1/1
A535140M 140 200 127 95 180 24066 1/1 A535180S 5-5/8 205 127 95 183 24439 1/1
A535145M 145 205 127 95 183 24961 1/1 A535184S 5-3/4 205 127 95 183 26303 1/1
A535150M 150 210 127 100 190 26918 1/1 A535188S 5-7/8 210 127 100 190 26627 1/1
A535155M 155 215 175 100 195 27998 1/1 A535192S 6 215 175 100 195 29105 1/1
A535160M 160 225 175 100 200 31132 1/1 A535196S 6-1/8 220 175 100 195 28695 1/1
A535165M 165 230 175 105 205 32455 1/1 A535200S 6-1/4 220 175 100 195 28581 1/1
A535170M 170 235 175 105 205 33150 1/1 A535204S 6-3/8 225 175 100 200 30775 1/1
A535175M 175 240 175 110 210 34520 1/1 A535208S 6-1/2 230 175 105 205 31057 1/1
A535180M 180 250 175 110 213 38239 1/1 A535212S 6-5/8 235 175 105 205 32173 1/1
A535185M 185 255 175 110 213 39849 1/1 A535216S 6-3/4 235 175 105 205 33688 1/1
A535190M 190 265 175 115 220 41491 1/1 A535220S 6-7/8 240 175 110 210 32414 1/1
A535200M 200 275 175 120 225 44442 1/1 A535224S 7 245 175 110 210 35530 1/1
A535210M 210 285 175 125 235 48784 1/1 A535240S 7-1/2 265 175 115 220 41160 1/1
A535215M 215 290 175 125 240 51218 1/1 A535244S 7-5/8 265 175 115 220 41527 1/1
A535225M 225 305 175 135 250 57571 1/1 A535252S 7-7/8 275 175 120 225 44463 1/1
A535235M 235 315 175 140 260 62922 1/1 A535256S 8 280 175 120 230 45898 1/1
(Make - to - order production) (Make - to - order production)

263
 Standard Impact Socket
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

B535M 3-1/2" B535S 3-1/2"

▪ DIN 3129 ▪ ANSI/ASME B107.1
D1

D2

D1

D2
ℓ ℓ
L L

KT NO. D1 D2 ℓ L g KT NO. D1 D2 ℓ L g
mm mm mm mm mm inch mm mm mm mm
B535105M 105 165 175 70 175 18736 1/1 B535132S 4-1/8 165 175 70 175 18749 1/1
B535110M 110 170 175 75 175 19192 1/1 B535136S 4-1/4 168 175 75 175 19087 1/1
B535115M 115 175 175 78 180 19740 1/1 B535140S 4-3/8 170 175 75 175 19742 1/1
B535120M 120 180 175 80 185 20249 1/1 B535144S 4-1/2 175 175 78 180 19725 1/1
B535125M 125 185 175 82 185 21866 1/1 B535148S 4-5/8 175 175 80 180 19957 1/1
B535130M 130 190 175 85 194 22709 1/1 B535152S 4-3/4 180 175 80 185 20142 1/1
B535135M 135 200 175 90 200 24242 1/1 B535156S 4-7/8 185 175 82 185 22040 1/1
B535140M 140 205 175 95 205 25594 1/1 B535160S 5 190 175 82 194 21593 1/1
B535145M 145 210 175 95 210 31125 1/1 B535164S 5-1/8 190 175 85 194 22640 1/1
B535150M 150 215 175 100 210 32386 1/1 B535168S 5-1/4 200 175 90 200 23594 1/1
B535160M 160 230 175 100 220 35851 1/1 B535172S 5-3/8 200 175 95 200 24645 1/1
B535165M 165 235 175 105 224 37929 1/1 B535176S 5-1/2 205 175 95 205 25572 1/1
B535170M 170 240 175 105 225 38715 1/1 B535180S 5-5/8 205 175 95 205 30530 1/1
B535175M 175 245 175 110 230 40057 1/1 B535184S 5-3/4 210 175 95 210 31925 1/1
B535180M 180 255 200 110 230 43773 1/1 B535188S 5-7/8 215 175 100 210 32509 1/1
B535185M 185 260 200 110 235 46944 1/1 B535192S 6 220 175 100 215 33432 1/1
B535190M 190 270 200 115 240 50602 1/1 B535196S 6-1/8 220 175 100 215 34281 1/1
B535200M 200 280 200 120 245 52902 1/1 B535200S 6-1/4 230 175 100 220 35136 1/1
B535210M 210 290 200 125 250 57508 1/1 B535204S 6-3/8 230 175 100 220 36511 1/1
B535215M 215 300 200 125 250 60066 1/1 B535208S 6-1/2 235 175 105 224 37769 1/1
B535225M 225 310 200 135 265 61504 1/1 B535212S 6-5/8 235 175 105 224 37989 1/1
B535235M 235 315 200 140 267 67914 1/1 B535216S 6-3/4 240 175 105 225 38706 1/1
(Make - to - order production) B535220S 6-7/8 245 175 110 230 39875 1/1
B535224S 7 250 200 110 230 41995 1/1
B535228S 7-1/8 255 200 110 230 44245 1/1
B535232S 7-1/4 260 200 110 235 46618 1/1
B535236S 7-3/8 270 200 115 240 48119 1/1
B535240S 7-1/2 270 200 115 240 50657 1/1
B535244S 7-5/8 275 200 115 240 51494 1/1
B535248S 7-3/4 280 200 120 245 52113 1/1
B535252S 7-7/8 280 200 120 245 53592 1/1
B535256S 8 285 200 120 245 55599 1/1
B535260S 8-1/8 290 200 120 250 56258 1/1
B535264S 8-1/4 290 200 125 250 57502 1/1
B535268S 8-3/8 300 200 125 250 59140 1/1
B535272S 8-1/2 300 200 125 250 59438 1/1
B535276S 8-5/8 305 200 135 260 61945 1/1
B535280S 8-3/4 310 200 135 265 64583 1/1
B535284S 8-7/8 315 200 140 267 66142 1/1
(Make - to - order production)

264
265
 TORQUE CONTROL &
MULTIPLIERS
▪ Torque Wrench

▪ Interchangeable Torque Wrench &

Accessory

▪ Electronic Torque Adapter

▪ Torque Screwdriver

▪ Torque Angle Guage & Multiplier

▪ Torque Tester

Calibration Instruction And Reminder of

Torque Wrench
In test conditions, the torque wrench should
remain
within the tolerances laid down by DIN ISO 6789
& ASME B107.14M-2004 for 5000 cycles. 34462-2DG
0810600435

Practically, this may be affected and changed

60-340
Nm 2008/10/01

by ingress of dust, causing wear, or by damage

caused by using the tool improperly such as to
60.0 65.3 70.7 67.9 68.0 68.0 63.9 72.1 68.9 68.8 68.8

204.0 195.8 212.2 201.4 201.6 202.1 191.8 216.2 207.5 206.0 206.7

loosen fasteners or being dropped regularly. 340.0 326.4 353.6 336.0 336.8

DIN-ISO6789
337.3 319.6 360.4 341.3 339.3 341.0

Assuming the users are trained to use the torque

LU-001
D007

wrenches, and follow the provided comments

of instruction, a period of twelve months is
reasonable for torque wrenches used in non
safety critical areas. Calibration Certificate
For those tools used in critical applications, a three
month or even monthly check would be suggested.
190
170
150
130
110
90

50
70
Nm

19 0
200
180
160
140
120
100
80
60

L
1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

Recyclable cylinedrical package

Patented ring

Display hanger Hexagon design to prevent roll

266
267
Master Torque Control
62 SERIES

Q u i c k:
• Quick release and fine tooth gears design increases
efficiency for safety tightening

S o u n d :
• Click sound and vibration reminds operator to stop in
correct torque

L u br i c a n t:
• Apply top industrial level lubricant to reduce friction and
keep performance in good condition much longer

S p r i n g:
• Made of high quality alloy steel to offer extrnded working
cycles

F r a me :
• Hardened tube provides extreme durability against
friction to assure precision of tolerance

E a s y :
• Auto lock design of torque adjustment provides quick
and comfortable working experience

• ±3% tolerance of torque and

10,000 cycles durability performs
better than international standard
“DIN ISO 6789 & ASME B170.300-
2010” with ±4% tolerance and
5,000 cycles requirement.
Heavy Duty Adjustable Torque Wrench
Design for easy torque adjustment 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 in.lb. = 0.113 Nm = 1.152 kgf.cm
Tolerance of torque ±3%(CW)
CW/CCW Direction
Automatic quickly
return adjustment

Quick release Wide range of

3/4" & 1" No Push choice distinct
laser scale Comfortable rubber handle

Dual Scale - English & Newton Meter ( in.lb. / ft.lb. & Nm)
Gear Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
teeth drive in. lb. / ft. lb. Nm mm
34262-1CG 24 1/4" 30~200 in.lb. 1 in.lb. 4.0~22.0 Nm 0.12 Nm 324 640 1 / 12
34362-1CG 24 3/8" 30~200 in.lb. 1 in.lb. 4.0~22.0 Nm 0.12 Nm 324 640 1 / 12
34362-2CG 32 3/8" 10~80 ft.lb. 0.5 ft.lb. 16.9~105.1 Nm 0.7 Nm 435 1300 1 / 12
34462-1CG 32 1/2" 20~150 ft.lb. 1 ft.lb. 34~197 Nm 1.4 Nm 521 1590 1 / 12
34462-2CG 32 1/2" 30~250 ft.lb. 1 ft.lb. 47~332 Nm 1.4 Nm 613 1810 1 / 12
34662-1CG 24 3/4" 50~450 ft.lb. 5 ft.lb. 102~576 Nm 6.8 Nm 1048 5500 1/2
34662-2CG 24 3/4" 100~600 ft.lb. 5 ft.lb. 169~779 Nm 6.8 Nm 1234 5600 1/2
34662-3CG 24 3/4" 150~750 ft.lb. 5 ft.lb. 237~983 Nm 6.8 Nm 1238 6150 1/2
34862-1CG 24 1" 150~750 ft.lb. 5 ft.lb. 237~983 Nm 6.8 Nm 1238 6150 1/2
Single scale - Newton Meter (Nm)
Gear Square Torque range Overall length g
KT NO. Incr.
teeth drive Nm mm 1. Do not use this torque wrench over its scale range.
2. Do not use this torque wrench as a normal hand tool.
34262-1DG 24 1/4" 4~20 Nm 0.1 Nm 324 640 1 / 12 3. Torque wrench need to be calibrated periodically for accuracy.
34262-2DG 24 1/4" 2~10 Nm 0.1 Nm 281 560 1 / 12
34262-3DG 24 1/4" 5~30 Nm 0.5 Nm 325 640 1 / 12 34262-1DK
34362-1DG 24 3/8" 4~20 Nm 0.1 Nm 324 640 1 / 12 34362-1DK
34362-2DG 32 3/8" 20~100 Nm 0.5 Nm 435 1300 1 / 12 34362-2DK:
34362-3DG 32 3/8" 10~60 Nm 0.5 Nm 325 1300 1 / 12 34362-2xx / 3xx
34462-1DG 32 1/2" 40~200 Nm 1 Nm 521 1590 1 / 12
34462-1DK
34462-2DG 32 1/2" 60~340 Nm 2 Nm 613 1810 1 / 12
34462-3DG 32 1/2" 20~100 Nm 1 Nm 436 1300 1 / 12 34462-3DK: 34462-3DG / 3GG
34462-4DG 32 1/2" 80~400 Nm 2 Nm 613 1970 1 / 12 34662-1DK
34662-1DG 24 3/4" 100~600 Nm 5 Nm 1048 5500 1/2 34662-3DK1: 34662-3xxx series No. after 0805xxxx
34662-2DG 24 3/4" 150~800 Nm 5 Nm 1234 5600 1/2 34862-1DK: series No. before 0805xxxx
34662-3DG 24 3/4" 200~1000 Nm 5 Nm 1238 6150 1/2 34862-2DK: series No. after 0805xxxx
34862-1DG 24 1" 200~1000 Nm 5 Nm 1238 6150 1/2

Single scale - English (in.lb./ft.lb.)

Gear Square Torque range Overall length g
KT NO. Incr.
teeth drive in.lb. / ft.lb. mm
34262-1EG 24 1/4" 30~200 in.lb. 1 in.lb. 324 640 1 / 12
34362-1EG 24 3/8" 30~200 in.lb. 1 in.lb. 324 640 1 / 12
34362-2EG 32 3/8" 10~80 ft.lb. 0.5 ft.lb. 435 1300 1 / 12
34462-1EG 32 1/2" 20~150 ft.lb. 1 ft.lb. 521 1590 1 / 12
34462-2EG 32 1/2" 30~250 ft.lb. 1 ft.lb. 613 1810 1 / 12
34662-1EG 24 3/4" 50~450 ft.lb. 5 ft.lb. 1048 5500 1/2
34662-2EG 24 3/4" 100~600 ft.lb. 5 ft.lb. 1234 5600 1/2
34662-3EG 24 3/4" 150~750 ft.lb. 5 ft.lb. 1238 6150 1/2
34662-4EG 24 3/4" 60~300 ft.lb. 2 ft.lb. 614 1800 1 / 12
34862-1EG 24 1" 150~750 ft.lb. 5 ft.lb. 1238 6150 1/2

Dual Scale - Newton Meter & English ( Nm & ft.lb.)

Gear Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
teeth drive Nm ft. lb. mm
34462-1FG 32 1 / 2" 40~200 Nm 1 Nm 33.2~143.8 ft.lb. 0.8 ft.lb. 521 1590 1 / 12
34462-2FG 32 1 / 2" 60~340 Nm 2 Nm 51.6~243.4 ft.lb. 1.5 ft.lb. 613 1720 1 / 12
34862-1FG 24 1" 200~1000 Nm 5 Nm 166~719 ft.lb. 5 ft.lb. 1238 6150 1/2

Dual Scale - Kilogram-force Centimeter & Newton Meter (kgf.cm & Nm)
Gear Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
teeth drive kgf.cm / kgf.m Nm mm
34262-1GG 24 1/4" 40~200 Kgf.cm 1 Kgf.cm 4.4~19.1 Nm 0.92 Nm 324 640 1 / 12
34362-1GG 24 3/8" 40~200 Kgf.cm 1 Kgf.cm 4.4~19.1 Nm 0.92 Nm 324 640 1 / 12
34362-2GG 32 3/8" 200~1000 Kgf.cm 5 Kgf.cm 22.1~95.6 Nm 0.46 Nm 435 1300 1 / 12
34462-1GG 32 1/2" 400~2000 Kgf.cm 10 Kgf.cm 44.1~191.2 Nm 0.46 Nm 521 1590 1 / 12
34462-2GG 32 1/2" 6~34 Kgf.m 0.2 Kgf.m 68.6~323.6 Nm 1.82 Nm 613 1810 1 / 12
34462-3GG 32 1/2" 200~1000 Kgf.cm 0.5 Kgf.m 22.1~95.6 Nm 4.9 Nm 436 1470 1 / 12
34662-1GG 24 3/4" 10~60 Kgf.m 0.5 Kgf.m 123~564 Nm 4.9 Nm 1048 5500 1/2
34662-2GG 24 3/4" 15~80 Kgf.m 0.5 Kgf.m 172~760 Nm 4.9 Nm 1234 5600 1/2
34662-3GG 24 3/4" 20~100 Kgf.m 0.5 Kgf.m 221~956 Nm 4.9 Nm 1238 6150 1/2
34862-1GG 24 1" 20~100 Kgf.m 0.5 Kgf.m 221~956 Nm 4.9 Nm 1238 6150 1/2

269
 Heavy Duty Adjustable Torque Wrench
Design for easy torque adjustment
Quality accords to DIN ISO 6789 & ASME B107.300-2010
Tolerance of torque ±3%(CW)
CW/CCW Direction 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
34862-2CF, 34862-2DF 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
34862-2EF, 34862-2FF 1 in.lb. = 0.113 Nm = 1.152 kgf.cm

34862-2CG, 34862-2DG
34862-2EG, 34862-2FG
34862-2GG

It needs to use with extension bar

Dual Scale - English & Newton Meter ( ft.lb. & Nm)

Square Torque Rrange Torque range Overall length g
KT NO. Incr. Incr.
drive ft. lb. Nm mm
34862-2CG 1" 200~1000 ft.lb. 5 ft.lb. 305~1322 Nm 6.8 Nm 1850 12200 1/2
34862-2CF 1" 200~1000 ft.lb. 5 ft.lb. 305~1322 Nm 6.8 Nm 1850 12200 1/2

Single scale - Newton Meter (Nm)

Square Torque range Overall length g 1. Do not use this torque wrench over its scale range.
KT NO. drive Nm
Incr. mm 2. Do not use this torque wrench as a normal hand tool.
3. Torque wrench need to be calibrated periodically for accuracy.
34862-2DF 1" 300~1500 Nm 10 Nm 1850 12200 1/2
34862-2DG 1" 300~1500 Nm 10 Nm 1850 12200 1/2

Single scale - English (ft.lb.)

Square Torque range Overall length g
KT NO. drive ft. lb.
Incr. mm
34862-1DK-series No. before 0805xxx
34862-2EG 1" 200~1000 ft.lb. 5 ft.lb. 1850 12200 1/2 34862-2DK-series No. after 0805xxx
34862-2EF 1" 200~1000 ft.lb. 5 ft.lb. 1850 12200 1/2

Dual Scale - Newton Meter & English ( Nm & ft.lb.)

Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive Nm ft. lb. mm
34862-2FF 1" 300~1500 Nm 10 Nm 258~1070 ft.lb. 7.4 ft. lb. 1850 12200 1/2
34862-2FG 1" 300~1500 Nm 10 Nm 258~1070 ft.lb. 7.4 ft. lb. 1850 12200 1/2

Dual Scale - Kilogram-force Centimeter & Newton Meter (kgf.cm & Nm)
Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive kgf.cm / kgf.m Nm mm
34862-2GG 1" 30~150 Kgf.m 1 Kgf.m 343~1422 Nm 5 Nm 1850 12200 1/2

270
Heavy Duty Adjustable Torque Wrench
Design for easy torque adjustment 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 in.lb. = 0.113 Nm = 1.152 kgf.cm
Tolerance of torque ±3%(CW)
CW/CCW Direction

Push through mechanism for easy repair

Wide range of choice
Distinct laser scale

0 90 80

TORQUE
Nm

A
34862-3DK90
B

C
34862-3DK
D

54mm 64mm 34862-3DK91

A B C D
1. Do not use this torque wrench over its scale range.
2. Do not use this torque wrench as a normal hand tool.
3. Torque wrench need to be calibrated periodically for accuracy.
Dual Scale - English & Newton Meter (in.lb. / ft.lb. & Nm)
Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive ft.lb. Nm mm
34862-3CF 1" 400~2000 ft.lb. 10 ft.lb. 610~2644 Nm 13.55 Nm 2755 23990 1/1

Square Torque range Torque range Overall length g

KT NO. Incr. Incr.
drive Nm ft.lb. mm
34862-3FF 1" 500~2500 Nm 14.77 ft.lb. 443~1771 ft.lb. 20 Nm 2755 25380 1/1

Heavy Duty Mini-type Torque Wrench

Industrial application
Quality accords to DIN ISO 6789 & ASME B107.14M-2004
Tolerance of torque ±3%(CW)
CW/CCW Direction

Quick release

Automatic quickly 3426C-1DK for 3426C-1DF/2DF

return adjustment

3436C-1DK for 3436C-1DF/2DF

Single scale - Newton Meter (Nm)
Square Torque range Overall length g
KT NO. Incr.
drive Nm mm
3426C-1DF 1/4" 3~15 Nm 0.1 Nm 211 330 24
3426C-2DF 1/4" 5~25 Nm 0.2 Nm 249 430 24
3436C-1DF 3/8" 3~15 Nm 0.1 Nm 211 450 24
3436C-2DF 3/8" 5~25 Nm 0.2 Nm 249 550 24

271
 Heavy Duty 72 Teeth Adjustable Torque Wrench
Colorful quick release button design 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
Fixed head version allows using in narrow spaces 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 in.lb. = 0.113 Nm = 1.152 kgf.cm

Tolerance of torque ±3%(CW)

CW/CCW Direction
5° Gear action degree (72 teeth)

Automatic quickly
return adjustment

Wide range of
choice Distinct
laser scale

Comfortable rubber handle

Single scale - Newton Meter (Nm)

Square Torque range Overall length g
KT NO. drive Nm
Incr. mm
3426A-1DG 1/4" 2~10 Nm 0.1 Nm 285 560 1 / 24
3426A-2DG 1/4" 4~20 Nm 0.1 Nm 325 640 1 / 24
3436A-2DG 3/8" 20~100 Nm 0.5 Nm 430 1300 1 / 12
3426A-1DK
3446A-1DG 1/2" 40~200 Nm 1 Nm 490 1460 1 / 12 3436A-2DK
3446A-2DG 1/2" 60~340 Nm 2 Nm 590 1750 1 / 12 3446A-1DK
series No. before 17086A
Single scale - English (in.lb./ft.lb.)
Square Torque range Overall length g
KT NO. drive in. lb. / ft. lb.
Incr. mm
3426A-1EG 1/4" 20~100 in.lb. 1 in.lb. 285 560 1 / 24
3426A-2EG 1/4" 30~200 in.lb. 1 in.lb. 325 640 1 / 24 3426A-1DK01
3436A-2EG 3/8" 10~80 ft.lb. 0.5 ft.lb. 430 1300 1 / 12 3436A-2DK01
3446A-1EG 1/2" 20~150 ft.lb. 1 ft.lb. 490 1460 1 / 12
3446A-1DK01
3446A-2EG 1/2" 30~250 ft.lb. 1 ft.lb. 590 1750 1 / 12
series No. after 17086A

1. Do not use this torque wrench over its scale range.

2. Do not use this torque wrench as a normal hand tool.
3. Torque wrench need to be calibrated periodically for accuracy.

272
Heavy Duty Interchangeable Torque Wrench
Using standard insert head 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
Positive button design which removes the insert head easily 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 in.lb. = 0.113 Nm = 1.152 kgf.cm

Tolerance of torque ±3%(CW )

CW/CCW Direction

Automatic quickly
return adjustment

Wide range of choice

Distinct laser scale

Comfortable rubber handle

Dual Scale - English & Newton Meter ( ft.lb. & Nm)

Size Torque range Torque range Overall length g
KT NO. Incr. Incr.
mm ft. lb. Nm mm
34512-1CG 9 x 12 20~100 in.lb. 1 in.lb 2.8~10.7 Nm 0.12 Nm 261 510 1 / 12
34512-2CG 9 x 12 30~200 in.lb. 1 in.lb 4.0~22.0 Nm 0.12 Nm 306 590 1 / 12
34512-3CG 9 x 12 10~80 ft.lb. 0.5 ft.lb 16.9~105.1 Nm 0.7 Nm 430 1270 1 / 12
34522-1CG 14 x 18 10~80 ft.lb. 0.5 ft.lb 16.9~105.1 Nm 0.7 Nm 430 1270 1 / 12
34522-2CG 14 x 18 20~150 ft.lb. 1 ft.lb 34~197 Nm 1.4 Nm 485 1410 1 / 12
34522-3CG 14 x 18 30~250 ft.lb. 1 ft.lb 47~332 Nm 1.4 Nm 580 1590 1 / 12

Single scale - Newton Meter (Nm)

Size Torque range Overall length g
KT NO. Incr.
mm Nm mm
34512-1DG 9 x 12 2~10 Nm 0.1 Nm 261 510 1 / 12
34512-2DG 9 x 12 4~20 Nm 0.1 Nm 306 590 1 / 12
34512-4DG 9 x 12 10~60 Nm 0.5 Nm 306 590 1 / 12
34512-3DG 9 x 12 20~100 Nm 0.5 Nm 430 1270 1 / 12
34522-1DG 14 x 18 20~100 Nm 0.5 Nm 430 1270 1 / 12
34522-2DG 14 x 18 40~200 Nm 1 Nm 485 1410 1 / 12
34522-3DG 14 x 18 60~340 Nm 2 Nm 580 1590 1 / 12
34522-4DG 14 x 18 100~600 Nm 5 Nm 1015 6200 1/2
34522-5DG 14 x 18 10~60 Nm 0.5 Nm 360 1270 1 / 12
34522-6DG 14 x 18 150~800 Nm 5 Nm 1195 6620 1/2
34522-7DG 14 x 18 70~350 Nm 2 Nm 580 1800 1 / 12
34522-8DG 14 x 18 200~1000 Nm 5 Nm 1200 6620 1/2
34522-9DG 14 x 18 80~400 Nm 2 Nm 580 1780 1 / 12

Single scale - English (in.lb./ft.lb.)

Size Torque range Overall length g
KT NO. Incr.
mm in. lb. / ft. lb. mm
34512-1EG 9 x 12 20~100 in.lb. 1 in.lb 261 510 1 / 12
34512-2EG 9 x 12 30~200 in.lb. 1 in.lb 306 590 1 / 12
34512-3EG 9 x 12 10~80 ft.lb. 0.5 ft.lb 430 1270 1 / 12
34522-1EG 14 x 18 10~80 ft.lb. 0.5 ft.lb 430 1270 1 / 12
34522-2EG 14 x 18 20~150 ft.lb. 1 ft.lb 485 1410 1 / 12
34522-3EG 14 x 18 30~250 ft.lb. 1 ft.lb 580 1590 1 / 12

Dual Scale - Newton Meter & English ( Nm & ft.lb. )

Size Torque range Torque range Overall length g
KT NO. Incr. Incr.
mm Nm ft. lb. mm
34512-1FG 9 x 12 2~10 Nm 0.1 Nm 22.1~84.1 in.lb. 0.9 in.lb 261 510 1 / 12
34512-2FG 9 x 12 4~20 Nm 0.1 Nm 39.8~172.6 in.lb. 0.9 in.lb 306 590 1 / 12
34512-3FG 9 x 12 20~100 Nm 0.5 Nm 16.6~71.9 ft.lb. 0.4 ft.lb 430 1270 1 / 12
34522-1FG 14 x 18 20~100 Nm 0.5 Nm 16.6~71.9 ft.lb. 0.4 ft.lb 430 1270 1 / 12
34522-2FG 14 x 18 40~200 Nm 1 Nm 33.2~143.8 ft.lb. 0.8 ft.lb 485 1410 1 / 12
34522-3FG 14 x 18 60~340 Nm 2 Nm 51.6~243.4 ft.lb. 1.5 ft.lb 580 1590 1 / 12

1. Do not use this torque wrench over its scale range.

2. Do not use this torque wrench as a normal hand tool.
3. Torque wrench need to be calibrated periodically for accuracy.

273
 Insert Tool 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

345031 • Chrome plated 345032 • Chrome plated

▪ Ratchet insert tool

▪ 5° gear action degree (72 teeth)

3436A-2DK 3436A-2DK01
3446A-1DK 3446A-1DK01
series No. before 17086A series No. before 17086A
3466A-1DK01
3426A-1DK 3426A-1DK01 series No. before 17086A
3436A-2DK 3436A-2DK01
3446A-1DK 3446A-1DK01
series No. before 17086A series No. after 17086A 3466A-1DK
series No. before 17086A

Lw* L g Lw* L g
KT NO. Size KT NO. Size
mm mm mm mm mm mm

34503102R 1/4"DR 9 x 12 17 46 71 12 / 192 34503203R 3/8"DR 14 x 18 27 70 218 6 / 96

34503103R 3/8"DR 9 x 12 17.6 48.8 106 10 / 160 34503204R 1/2"DR 14 x 18 27 70 256 6 / 96
34503104R 1/2"DR 9 x 12 25 60 234 6 / 96 34503206R 3/4"DR 14 x 18 27 71.5 348 4 / 64

345011 • Chrome plated

▪ Open end insert Tool

Size Lw* L g
KT NO. mm mm mm mm
34501107M 7 9 x 12 17.5 37.4 36 12 / 192
34501108M 8 9 x 12 17.5 37.9 37 12 / 192
34501109M 9 9 x 12 17.5 37.9 37 12 / 192
34501110M 10 9 x 12 17.5 38.2 41 12 / 192
34501111M 11 9 x 12 17.5 39.0 39 12 / 192
34501112M 12 9 x 12 17.5 39.0 40 12 / 192
34501113M 13 9 x 12 17.5 39.3 45 12 / 192
34501114M 14 9 x 12 20 43.1 54 12 / 192
34501115M 15 9 x 12 20 43.4 55 12 / 192 Size Lw* L g
KT NO.
34501116M 16 9 x 12 20 43.9 57 12 / 192 inch mm mm mm
34501117M 17 9 x 12 20 44.4 58 12 / 192 34501108S 1/4 9 x 12 17 37 36 12 / 192
34501118M 18 9 x 12 20 45.3 59 12 / 192 34501110S 5/16 9 x 12 17 37 38 12 / 192
34501119M 19 9 x 12 20 45.0 64 12 / 192 34501112S 3/8 9 x 12 17 38 39 12 / 192
34501121M 21 9 x 12 25 52.4 120 10 / 160 34501114S 7/16 9 x 12 17 39 41 12 / 192
34501122M 22 9 x 12 25 53.1 124 10 / 160 34501116S 1/2 9 x 12 17 39 43 12 / 192
34501124M 24 9 x 12 25 54.1 128 8 / 128 34501118S 9/16 9 x 12 20 43 53 12 / 192
34501127M 27 9 x 12 32.5 60.1 189 8 / 128 34501120S 5/8 9 x 12 20 43 57 12 / 192
34501130M 30 9 x 12 32.5 60.9 195 10 / 80 34501122S 11/16 9 x 12 20 44 62 12 / 192
34501132M 32 9 x 12 32.5 62.6 213 10 / 80 34501124S 3/4 9 x 12 20 45 65 12 / 192
34501136M 36 9 x 12 32.5 64.8 213 10 / 80

274
Insert Tool 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

345014 • Chrome plated

Size Lw* L g
KT NO. mm mm mm mm
34501410M 10 9 x 12 17.5 42.4 51.6 12 / 192
34501411M 11 9 x 12 17.5 43.0 53.0 12 / 192
34501412M 12 9 x 12 17.5 43.8 55.0 12 / 192
34501413M 13 9 x 12 17.5 43.9 53.8 12 / 192
34501414M 14 9 x 12 17.5 44.3 57.6 12 / 192
34501416M 16 9 x 12 17.5 45.0 58.6 12 / 192
34501417M 17 9 x 12 17.5 45.4 65.0 12 / 192
34501418M 18 9 x 12 17.5 46.0 66.2 12 / 192
34501419M 19 9 x 12 17.5 46.7 73.0 12 / 192
34501421M 21 9 x 12 17.5 47.6 72.2 12 / 192
34501422M 22 9 x 12 17.5 48.5 74.2 12 / 192

345021 • Chrome plated

▪ Ring insert tool

Size Lw* L g
KT NO. mm mm mm mm
34502107M 7 9 x 12 17.5 39 37 12 / 288
34502108M 8 9 x 12 17.5 40 36 12 / 288 Size Lw* L g
KT NO. inch mm mm mm
34502110M 10 9 x 12 17.5 41 39 12 / 288
34502111M 11 9 x 12 17.5 43 42 12 / 288 34502108S 1/4 9 x 12 17.5 39 38 12 / 288
34502112M 12 9 x 12 17.5 43 51 12 / 288 34502110S 5/16 9 x 12 17.5 40 37 12 / 288
34502113M 13 9 x 12 17.5 44 51 12 / 288 34502112S 3/8 9 x 12 17.5 41 42 12 / 288
34502114M 14 9 x 12 17.5 45 52 12 / 288 34502114S 7/16 9 x 12 17.5 43 41 12 / 288
34502115M 15 9 x 12 17.5 45 53 12 / 288 34502116S 1/2 9 x 12 17.5 43 52 12 / 288
34502116M 16 9 x 12 17.5 46 56 12 / 288 34502118S 9/16 9 x 12 17.5 45 53 12 / 288
34502117M 17 9 x 12 17.5 47 55 12 / 192 34502120S 5/8 9 x 12 17.5 46 58 12 / 288
34502118M 18 9 x 12 17.5 47 60 12 / 192 34502122S 11/16 9 x 12 17.5 47 62 12 / 192
34502119M 19 9 x 12 17.5 49 63 12 / 192 34502124S 3/4 9 x 12 17.5 49 62 12 / 192
34502121M 21 9 x 12 17.5 50 68 12 / 192 34502126S 13/16 9 x 12 17.5 50 72 12 / 192
34502122M 22 9 x 12 17.5 51 70 12 / 192 34502128S 7/8 9 x 12 17.5 51 69 12 / 192

345012 • Chrome plated

Size Lw* L g
KT NO. mm mm mm mm
34501213M 13 14 x 18 25 58 117 12 / 192
34501214M 14 14 x 18 25 58 120 12 / 192
34501215M 15 14 x 18 25 58 116 12 / 192
34501216M 16 14 x 18 25 59 127 10 / 160
34501217M 17 14 x 18 25 60 138 10 / 160
34501218M 18 14 x 18 25 60 136 10 / 160
34501219M 19 14 x 18 25 61 140 10 / 160 Size Lw* L g
KT NO.
34501221M 21 14 x 18 25 61 160 6 / 96 inch mm mm mm
34501222M 22 14 x 18 25 62 162 6 / 96
34501216S 1/2 14 x 18 25 58 117 12 / 192
34501223M 23 14 x 18 25 62 163 6 / 96
34501218S 9/16 14 x 18 25 58 120 12 / 192
34501224M 24 14 x 18 25 63 168 6 / 96
34501220S 5/8 14 x 18 25 59 127 10 / 160
34501225M 25 14 x 18 25 69 180 6 / 96
34501222S 11/16 14 x 18 25 60 138 10 / 160
34501226M 26 14 x 18 30 69 210 6 / 96
34501224S 3/4 14 x 18 25 61 140 10 / 160
34501227M 27 14 x 18 32.5 69 239 6 / 96
34501226S 13/16 14 x 18 25 61 160 6 / 96
34501230M 30 14 x 18 32.5 70 249 6 / 96
34501228S 7/8 14 x 18 25 62 162 6 / 96
34501232M 32 14 x 18 32.5 73 248 6 / 72
34501230S 15/16 14 x 18 25 63 168 6 / 96
34501234M 34 14 x 18 32.5 74 252 6 / 72
34501232S 1 14 x 18 25 69 180 6 / 96
34501236M 36 14 x 18 32.5 75 244 6 / 72
34501236S 1-1/8 14 x 18 32.5 70 249 6 / 96
34501238M 38 14 x 18 32.5 74 229 6 / 72
34501240S 1-1/4 14 x 18 32.5 73 248 6 / 96
34501240M 40 14 x 18 37 80 280 6 / 72
34501248S 1-1/2 14 x 18 32.5 74 229 6 / 96
34501241M 41 14 x 18 40 80 315 6 / 72

275
 Insert Tool
345022 • Chrome plated

Size Lw* L g
KT NO. mm mm mm mm
34502213M 13 14 x 18 25 62 129 12 / 192
34502214M 14 14 x 18 25 63 132 12 / 192
34502215M 15 14 x 18 25 63 132 12 / 192
34502216M 16 14 x 18 25 63 137 12 / 192
34502217M 17 14 x 18 25 65 141 12 / 192
34502218M 18 14 x 18 25 65 138 10 / 160
34502219M 19 14 x 18 25 66 144 10 / 160
34502221M 21 14 x 18 25 67 151 10 / 160
34502222M 22 14 x 18 25 68 156 6 / 96 Size Lw* L g
34502224M 24 14 x 18 25 69 161 6 / 96 KT NO. inch mm mm mm
34502227M 27 14 x 18 32.5 78 204 6 / 96
34502230M 30 14 x 18 32.5 79 204 6 / 96 34502216S 1/2 14 x 18 25 62 129 12 / 192
34502232M 32 14 x 18 32.5 81 213 6 / 96 34502218S 9/16 14 x 18 25 63 132 12 / 192
34502234M 34 14 x 18 32.5 82 225 6 / 90 34502220S 5/8 14 x 18 25 63 137 12 / 192
34502236M 36 14 x 18 32.5 83 230 6 / 90 34502224S 3/4 14 x 18 25 66 144 10 / 160
34502241M 41 14 x 18 40 86 235 6 / 90

Interchangeable Torque Wrench Set

34510 34520
1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

KT NO. Contents Kg
mm

1/4"
345102D08MR 34512-2DG 4~20 Nm 34503102R
DR
1.3 1 / 15
345011M 345021M
3/8"
345104D08MR 9 x 12 34512-4DG 10~60 Nm 34503103R
DR
1.3 1 / 15

1/4"
345101E08MR 34512-1EG 20~100 in.lb. 34503102R
DR
1.2 1 / 15

1/4" 10, 13, 17 10, 13, 17

345102E08MR 34512-2EG 30~200 in.lb. 34503102R
DR
1.3 1 / 15

KT NO. Contents Kg
mm

345201D11MR 34522-1DG 20~100 Nm 34503203R 3/8" DR 3.7 1/6

345202D11MR 34522-2DG 40~200 Nm 34503204R 1/2" DR 345012M 3.8 1/6

345203D11MR 34522-3DG 60~340 Nm 34503204R 1/2" DR 4 1/6

14 x 18
345201E11MR 34522-1EG 10~80 ft.lb. 34503203R 3/8" DR 3.7 1/6
13, 14, 15, 17,
345202E11MR 34522-2EG 20~150 ft.lb. 34503204R 1/2" DR 19, 22, 24, 27, 3.8 1/6
30
345203E11MR 34522-3EG 30~250 ft.lb. 34503204R 1/2" DR 4 1/6

276
Classic Type Adjustable Torque Wrench
Design for easy torque adjustment
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Tolerance of torque ±4%(CW) 1 in.lb. = 0.113 Nm = 1.152 kgf.cm
CW/CCW Direction
Step:
1 2 90 ° 3

CW

CCW

Push through mechanism

for easy repair
3426E
3436E
3446E
Four torque sizes
for easy scale
reading

CW Front Back

Hidden Rocker-Arm Design:

Pull out the rocker-arm, turn
CCW to 90° and stress clockwise
for adjusting the requested
torque value.

Step:
1 2 3
3466E
90 °

3436E-1DK
3446E-1DK
3426E-1DK
3466E-1DK

Dual Scale - English & Newton Meter ( in.lb. / ft.lb. & Nm / kg.m)
Square Torque range Overall length g
KT NO. drive Nm Incr. ft. lb. Incr. in. lb. Incr. gm / kg.m Incr. mm
3426E-1HG 1/4" 2.5~11 Nm 0.5 2~8 ft.lb. 1 20~100 in.lb. 10 300~1200gm 100 352 630 1 / 12
3436E-1HG 3/8" 2.5~11 Nm 0.5 2~8 ft.lb. 1 20~100 in.lb. 10 300~1200gm 100 352 740 1 / 12
3436E-2HG 3/8" 5~33 Nm 1 4~24 ft.lb. 1 40~300 in.lb. 10 0.5~3.4 kgf.m 0.1 450 870 1 / 12
3436E-3HG 3/8" 12~68 Nm 2 10~50 ft.lb. 5 100~600 in.lb. 25 1.2~7 kgf.m 0.2 505 1210 1 / 12
3446E-1HG 1/2" 25~135 Nm 5 20~100 ft.lb. 2 200~1200 in.lb. 50 3~14 kgf.m 1 555 1640 1 / 12
3446E-2HG 1/2" 50~225 Nm 5 40~160 ft.lb. 5 400~2000 in.lb. 50 5~23 kgf.m 1 590 1710 1 / 12
3446E-3HG 1/2" 70~330 Nm 10 50~250 ft.lb. 5 600~3000 in.lb. 100 7~35 kgf.m 1 803 3440 1/6
3466E-1HG 3/4" 140~560 Nm 10 100~410 ft.lb. 10 1200~5000 in.lb. 100 14~57 kgf.m 1 977 8480 1/2
3466E-2HG 3/4" 200~800 Nm 20 150~600 ft.lb. 20 1800~7200 in.lb. 200 22~82 kgf.m 2 1033 8860 1/2

277
 Click Type Adjustable Torque Wrench
Industrial application with durability
Loud click sound and strong impulse when required torque is reached
Tolerance of torque ±3%
Quality meets DIN ISO 6789 & ASME B107.300-2010
Ideal for using on oily, chemical and noisy assembling working field

Design for easy torque

setting by graduation

The mechanism of flat metal tube and window

scale-reading
Easy torque value setting with external scale and
knob

Torque range Overall length g

KT NO. Gear teeth Square drive Incr.
kgf.cm mm
3432F-1KF 24 3/8" 50-250 kgf.cm 2.5 240 450 1 / 24
3432F-3KF 24 3/8" 200-1000 kgf.cm 10 342 800 1 / 12
3442F-1KF 24 1/2" 200-1000 kgf.cm 10 342 800 1 / 12
3442F-3KF 24 1/2" 400-2000 kgf.cm 20 498 1500 1 / 12

Adjustable Torque Wrench

Design for easy torque adjustment 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 in.lb. = 0.113 Nm = 1.152 kgf.cm
Tolerance of torque ±4%(CW)
CW/CCW Direction
Comfortable rubber handle

Automatic quickly
return adjustment
Quick release

• The production of injection • One hand operation

34464-1DK
molding helps it against come off • Quick torque set
• Automatic torque locking
Dual Scale - Newton Meter & English ( Nm / ft.lb. )
Torque range Overall length g
KT NO. Gear teeth Square drive Incr.
Nm / ft.lb. mm
34464-1FG 24 1/2" 40-210 Nm ( 31-154.9 ft.lb. ) 1.0 470 1250 1 / 12
34464-2FG 24 1/2" 50-350 Nm ( 36.9-258 ft.lb. ) 3.0 590 1590 1 / 12

278
Adjustable Torque Wrench
Quality accords to DIN ISO 6789 & ASME B107.300-2010 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
Tolerance of torque ±4%(CW) 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
CW/CCW Direction 1 in.lb. = 0.113 Nm = 1.152 kgf.cm

15° Gear action degree (24 teeth)

Distinct torque scale Lock

Adjust screw Unlock

Dual Scale - Newton Meter & Kilogram-force Centimeter / Kilogram-force meter ( Nm & kgf.cm / kgf.m )
Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive Nm kgf.cm / kgf.m mm
34223-1A 1/4" 5~25 Nm 0.1 Nm 51~255 kgf.cm 1 kgf.cm 280 595 1 / 12
34323-1A 3/8" 5~25 Nm 0.1 Nm 51~255 kgf.cm 1 kgf.cm 280 595 1 / 12
34323-2A 3/8" 20~110 Nm 1 Nm 2.04~11.22 kgf.m 0.1 kgf.m 370 820 1 / 12
34423-1A 1/2" 42~210 Nm 1 Nm 4.3~21.4 kgf.m 0.41 kgf.m 450 1340 1 / 12
34423-2A 1/2" 50~350 Nm 3 Nm 5.1~35.7 kgf.m 0.27 kgf.m 570 2400 1 / 12

Dual Scale - English & Kilogram-force Centimeter / Kilogram-force meter ( in.lb. / ft.lb. & kgf.cm / kgf.m )
Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive in. lb. / ft. lb. kgf.cm / kgf.m mm
34223-1B 1/4" 25~250 in. lb. 1.5 in.lb. 29~288 kgf.cm 1.13 kgf.cm 280 595 1 / 12
34323-1B 3/8" 25~250 in. lb. 1.5 in.lb. 29~288 kgf.cm 1.13 kgf.cm 280 595 1 / 12
34323-2B 3/8" 5~80 ft. lb. 0.5 ft.lb. 0.7~11.10 kgf.m 0.07 kgf.m 370 820 1 / 12
34423-1B 1/2" 10~150 ft. lb. 1 ft.lb. 1.4~20.7 kgf.m 0.14 kgf.m 450 1340 1 / 12
34423-2B 1/2" 30~250 ft. lb. 2 ft.lb. 4.2~34.6 kgf.m 0.27 kgf.m 570 2400 1 / 12

Dual Scale - English & Kilogram-force Centimeter / Kilogram-force meter ( in.lb. / ft.lb. & kgf.cm / kgf.m )
Square Torque range Torque range Overall length g
KT NO. Incr. Incr.
drive in. lb. / ft. lb. kgf.cm / kgf.m mm
34223-1C 1/4" 25~250 in.lb. 1 in.lb. 2.8~28.2 Nm 0.17 Nm 280 595 1 / 12
34323-1C 3/8" 25~250 in.lb. 1 in.lb. 2.8~28.2 Nm 0.17 Nm 280 595 1 / 12
34323-2C 3/8" 5~80 ft.lb. 0.5 ft.lb. 6.8~108.5 Nm 0.68 Nm 370 820 1 / 12
34423-1C 1/2" 10~150 ft.lb. 1 ft.lb. 13.6~203.4 Nm 1.35 Nm 450 1658 1 / 12
34423-2C 1/2" 30~250 ft.lb. 2 ft.lb. 40.7~339 Nm 2.71 Nm 570 2400 1 / 12

34223-1DK1 34323-1DK1 34423-1DK1(24T) 34423-3DK(24T)

34323-2DK1 -series NO. before 090923xxxx -series NO. after 1309230001

For 34423-2ABC
34423-2DK01(45T)
-series NO. after 090923xxxx

1. Do not use this torque wrench over its scale range.

2. Do not use this torque wrench as a normal hand tool.
3. Torque wrench need to be calibrated periodically for accuracy.

279
 Heavy Duty Aluminum Adjustable Torque Wrench
Industrial application
Lightweight and robust;housing made by aluminium alloy
Multi-lever mechanism brings length independence and accurate torque
Loud click sound and string impulse when torque value reached
Easy lock and adjustment design
Tolerance of torque ±3%
Quality accords to DIN ISO 6789 & ASMEB 107.300-2010

Pull out the Rocket-Arm,turn to 90º

and stress clockwise for adjusting
the requested torque value

Clear dual scale

90°

Aluminium housing and

ergonomically designed handgrip

Step:
1 2

90°

Dual Scale - English & Newton Meter ( ft. lb. & Nm)

Torque range Overall length g

KT NO. Square drive Nm Incr. ft.lb. Incr. mm
3445G-1FB 1/2" 40~200 Nm 5 30~150 ft.lb. 5 555 1500 1 / 12
3465G-1FB 3/4" 110~550 Nm 10 80~400 ft.lb. 10 820 3000 1/2
3465G-2FB 3/4" 140~760 Nm 10 100~560 ft.lb. 10 820 3000 1/2
3465G-3FB 3/4" 200~1000 Nm 10 140~740 ft.lb. 10 820 3000 1/2
3485G-1DB 1" 600~1500 Nm 25 - - 1615 10900 1/1
3485G-2DB 1" 750~2000 Nm 50 - - 2370 11700 1/1

280
Electronic Torque Wrench
Electronic torque value readout
Peak hold and track mode selection
Angle accuracy (34387/34487)
Buzzer and LED indicator for presetting target torque
Engineering units (Nm, ft.lb, in.lb, kgf.m ) adjustment
Switch off automatically after 80 seconds
DIN ISO 6789 & ASME B107.300-2010
CW ±2% and CCW ±3% operation
Quick release
LCD 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

Display :
LCD display (±2 Digit) with measuring
ranges that can be selected for Nm, ft.lb, 0°
in.lb, kg.m
270° 90°
Battery Cap :
- AAAx3
180° Signal : - battery life 110 hrs
3-way signal when the maximum
torque value is reached, as a result
the wrench can be used in noisy
Backlight places.
LED warning light

• Electronic Torque Wrench (34367-2AG, 34467-1AG)

Preset
+ (Increase) LCD Torque Accuracy CW ± 2% / CCW ± 3%
Preset function 10
LED Buzzer Battery Cap 0.1 Nm/ ft.lb. ,0.01 kgf.m,
Display Resolution
1.0 lb.in
Operation Mode Peak/Track
Unit Selection kg.m, lb.in, lb.ft, Nm
- (Decrease)
(Clear) / (Backlight)
Gear Teeth 36
Battery AAA x 3 PC.
Pack / Track
110 hrs (continuous
Battery Life
operation)
-10°C- 60°C (13.9°F-139.9°F)
Operating Ambient
• Electronic Torque Angle-controlled Wrench le Temperature
Ang
(34387-2AG, 34487-1AG) Storage Temperature -20°C-70°C (-4°F-157.9°F)
Preset
+ (Increase) LCD Operating Relative
Angle 15 to 90% noncondensing
Humidity
Buzzer
LED Battery Cap 150 seconds (if do not use
Switch off Automatically
torque wrench)
(±1% of
reading)+(±1%@angular
Angle Accuracy velocity >10°/sec < 180°/
- (Decrease) sec)+
(Clear) / (Backlight)
(±1% of Text Texture)
0°~360°
Pack / Track
Angle
(34387-2AG,34487-1AG)

Dual Scale - English & Newton Meter ( in.lb. / ft.lb. & Nm / kg.m)
Square Torque range Overall length g
KT NO. drive Nm ft.lb. in. lb. kg.m mm
34367-2AG 3/8" 27-135 Nm 19.9-99.6 ft.lb. 239~1195 in.lb. 2.75~13.76 kgf.m 460 1400 1/6
34467-1AG 1/2" 40-200 Nm 29.5-147.5 ft.lb. 354~1770 in.lb. 4.08~20.38 kgf.m 530 1500 1/6
34387-2AG 3/8" 27-135 Nm 19.9-99.6 ft.lb. 239~1195 in.lb. 2.75~13.76 kgf.m 460 1400 1/6
34487-1AG 1/2" 40-200 Nm 29.5-147.5 ft.lb. 354~1770 in.lb. 4.08~20.38 kgf.m 530 1500 1/6

1. Do not press "M" and " " button together

otherwise system will enter in calibration mode.
2. Switch off the power after use.

281
 Electronic Torque Adapter 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm

34207-1A 34307-1A 34407-1A

▪ Specifications:
Accuracy ± 2% LED
Memory 50 Peak & Trace LCD
(-) Decrease
Display Resolution 0.1 Nm /ft.lb. ,0.01 kgf.m
Operation Mode Peak/Trace
Unit Selection kgf.m , ft.lb. , Nm
Battery AAA x 2 PC.
Battery Life 110hrs (continuous operation)
-10°C - 60°C (13.9°F - 139.9°F)
Operating Ambient
Temperature
Storage Temperature -20°C - 70°C (-4°F - 157.9°F)
Operating Relative
15 to 90% noncondensing
Humidity
70 seconds (if do not use Battery Cap
Switch off Automatically Memory
electronic torque adapter.) (+) Increase
LED indicator Green. Yellow. Red Power

34207-1A: 37.5 Nm (27.6 ft.lb.)

Overload Alarm 34307-1A: 168.8 Nm(124.5 ft.lb.)
34407-1A: 250 Nm (184.4 ft.Ib.)

Dual Scale - English & Newton Meter ( ft.lb. & Nm / kg.m)

Square Torque range Size g
KT NO. drive Nm ft.lb. kgf.m mm
34207-1A 1/4" 6~30 Nm 4.4~22.1 ft.lb. 0.61~3.06 kgf.m L75 x W45 x H40 124 12 / 48
34307-1A 3/8" 27~135 Nm 19.9~99.6 ft.lb. 2.75~13.76 kgf.m L75 x W45 x H40 198 12 / 48
34407-1A 1/2" 40~200 Nm 29.5~147.5 ft.Ib. 4.08~20.38 kgf.m L75 x W45 x H40 198.5 12 / 48

34607-1A
▪ Specifications:
Accuracy ± 2%
Memory 50 Memory
Display Resolution 0.1 Nm / ft.lb. , 0.01 kgf.m Peak & Trace
(+) Increase LED
Operation Mode Peak/Trace Power
Unit Selection kgf.m , ft.lb. , Nm LCD

Battery AA x 2 PC. Me

Battery Life 110hrs (continuous operation)

m Pe
ak
UN
IT

-10°C - 60°C (13.9°F - 139.9°F)

Tr a

Operating Ambient
ce
kg
-m
N-m

Temperature ft-l
b

Storage Temperature -20°C - 70°C (-4°F - 157.9°F)

Operating Relative
15 to 90% noncondensing
Humidity
70 seconds (if do not use
Switch off Automatically
electronic torque adapter.)
LED indicator Green. Yellow. Red LED
Overload Alarm 1250 Nm (886 ft.lb.) Battery Cap

(-) Decrease

Dual Scale - English & Newton Meter ( ft.lb. & Nm / kg.m)

Square Torque range Size g
KT NO. drive Nm ft.lb. kgf.m mm
34607-1A 3/4" 200 ~1000 Nm 147.6~738 ft.lb. 20.4~102 kgf.m L110 x W56 x H60 585 6 / 24

1. Do not press "M" and " " button together

otherwise system will enter in calibration mode.
2. Switch off the power after use.

282
Torque Screwdriver
34111 34211
▪ Suitable for 1/4" Hex insert bit; 1/4" socket 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
▪ Automatic adjustment knob design 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
▪ Easy-to-read laser scale 1 in.lb. = 0.113 Nm = 1.152 kgf.cm
▪ Ergonomic comfort rubber grip
▪ Tolerance of torque ±5% quality meets
Tolerance of torque within ±5% quality meets
DIN ISO 6789 & ASME B107.300-2010 DIN ISO 6789 & ASME B107.14M-2004
Easy- to-read
6.3 mm (1/4") hex
laser scale
driver for bit
Aluminum alloy

34111
34211

Automatic adjustment
High quality
knob design Ergonomic comfort
aluminum
rubber grip

Torque range Overall length g

KT NO. 1/4"DR. Incr.
cNm / Nm / in-lb mm

34111-1DG 10~120 cNm 1 cNm 180 207 1 / 24

34111-1EG 3~15 in-lb 0.1 in-lb 180 207 1 / 24
34111-2DG 1~6 Nm 0.1 Nm 196 475 1 / 24
34111-2EG 10~50 in-lb 0.5 in-lb 196 475 1 / 24
34211-3DG 4~9 Nm 0.1 Nm 196 475 1 / 24

Torque Angle Gauge

34440 34440A 34660 34660A
▪ Square Drive :
34440 ( 1/2" x 1/2" )
34660 ( 3/4" x 3/4" )
▪ 360° angle scale- clearly marked in 2° increments, and in intervals
of 10° and 30°
▪ Indicator etched on clear plastic plate, protects angle scale from
dirt and grease
▪ Adjustable arm keeps angle scale stationary
▪ Arm has two lengths for additional flexibility in placement against
components
▪ Tough composite dial and rotating index allowing operator to
accurately tighten meeting to standard

KT NO. Spec. g

34440 1/2"Fx1/2"M 190 1 / 20 34440 34660

34440A 1/2"Fx1/2"M 375 6 / 24
34660 3/4"Fx3/4"M 623 1 / 10
Magnetic
34660A 3/4"Fx3/4"M 908 6 / 12

34660A
34440A
• Step 1: Set up the torque • Step 2: Adjust the angle
value by torque wrench by angle gauge

283
 Torque Multiplier Don’t use pneumatic
tool together with the
multiplier.

34486 34488 34688

▪ Torque multiplication with 5:1, accuracy guaranteed better than ±5% 1 Nm = 0.738 ft.lb. = 0.102 kgf.m
▪ Reaction bar supplied in two styles for maximum versatility 1 ft.lb. = 1.356 Nm = 0.138 kgf.m
1 in.lb. = 0.113 Nm = 1.152 kgf.cm
▪ Ideal construction offers minimal maintenance and extended life
▪ Portable package brings convenience for use in different working places

Max Input

Max torque

Contents
34486-05A
34488-05A Multiplier head 1 PC.
34688-05A

34688-P01 Reaction bar 1 PC.

34688-P02 Reaction bar 1 PC.

Max input torque Max output torque A B kg

KT NO. Ratio Input square Output square Nm / Ft.Ib Nm / Ft.Ib mm mm

34486 5:1 1/2" 3/4" 300 / 220 1500 / 1100 108 116.3 7 1/2
34488 5:1 1/2" 1" 400 / 290 2000 / 1450 108 120.3 7.4 1/2
34688 5:1 3/4" 1" 540 / 400 2700 / 2000 108 129 7.4 1/2

284
Torque Multiplier
Don’t use pneumatic
tool together with the
multiplier.

34488-26
▪ Torque multiplication with 26:1, accuracy guaranteed better than ±5%
▪ Reaction bar supplied in two styles for maximum versatility
▪ High ratios offers an idea to replace long lever arm and heavy wrench
▪ ldeal construction offers minimal maintenance and extended life
▪ Portable package brings convenience for use in different working places
▪ Anti-backlash device

Input Square Drive

Reaction Bar

Torque
Multiplier Body

34488-26DK
Contents

Multiplier head 1 PC.

Rotary Angle Gauge

Output Square Drive

Reaction bar 2 PC.

Max input torque Max output torque kg

KT NO. Ratio Input square Output square Nm / Ft.Ib Nm / Ft.Ib

34488-26 26:1 1/2" 1" 175 / 130 4500 / 3300 15.7 1/1

285
 Universal Torque Convertor Set
3488A03MP
▪ It is a newly designed wheel wrench for truck
tires or car tires by using less labor to reach a
sufficient output torque
▪ Suitable for trucks, buses, and other heavy duty
vehicles

Contents

Power Enhanced Device 1 PC.

Prolonged Pole 1 PC.

Handle 1 PC.

32, 33
8835M
1:1 47:1

Max input torque kg

KT NO. Ratio Input square Output square Nm / Ft.Ib

3488A03MP 47:1 1" 1" 4700 / 3466 9.3 3

286
Torque Tester
ZV011
kg
▪ Specifications: 7.7 1/1
Calibration range 2~60 Nm
Accuracy ±0.5%
Units of measurement Lb-in, Lb-ft, Kg-m, Kg-cm, N-m, N-cm
Input Hex A/F (mm) 10mm
Square Drive Adaptor (inch) 1/4", 3/8", 1/2"
+5°C~ +40°C
Operating Temperature
Range
Storage Temperature Range +0°C~ +70°C
Power Input 100-240V DC9.0V...1.66A, 15W MAX
Base material/ Finish Aluminum Alloy / Painting
Dimension 210(L) x 150(W) x 140(H) mm ZV011A Europe
ZV011B America & Asia
233510M 333510M 433510MR Australia &
ZV011D
New Zealand

ZV012
kg
▪ Specifications: 8.1 1/1
Calibration range 8~400 Nm
Accuracy ±0.5%
Units of measurement Lb-in, Lb-ft, Kg-m, Kg-cm, N-m, N-cm
Input Hex A/F (mm) 22mm
Square Drive Adaptor (inch) 3/8", 1/2", 3/4"
+5°C~ +40°C
Operating Temperature
Range
Storage Temperature Range +0°C~ +70°C
Power Input 100-240V DC9.0V...1.66A, 15W MAX
Base material/ Finish Aluminum Alloy / Painting
Dimension 210(L) x 150(W) x 140(H) mm ZV012A Europe
ZV012B America & Asia
333522M 433522MR 633522M
Australia &
ZV012D
New Zealand

ZV013
kg
▪ Specifications: 8.9 1/1
Calibration range 100~1500 Nm
Accuracy ±0.5%
Units of measurement Lb-in, Lb-ft, Kg-m, Kg-cm, N-m
Input Hex A/F (mm) 36mm
Square Drive Adaptor (inch) 3/4"
+5°C~ +40°C
Operating Temperature
Range
Storage Temperature Range +0°C~ +70°C
Power Input 100-240V DC9.0V...1.66A, 15W MAX
Base material/ Finish Aluminum Alloy / Painting
Dimension 210(L) x 150(W) x 140(H) mm ZV013A Europe
ZV013B America & Asia
633536M Australia &
ZV013D
New Zealand

287
 WRENCHES
▪ Combination Wrench

▪ Open End Wrench

▪ Offset Ring Wrench

▪ Half Moon Ring Wrench

▪ Crowfoot Wrench

▪ Star Box End Wrench

▪ Flare Nut Wrench

▪ Flexible Head Socket Wrench

▪ Slogging Wrench

▪ Heavy Duty Wrench

▪ End Tubular Wrench

▪ Speed Wrench

▪ Angled Socket Wrench

▪ Adjustable Wrench

▪ Hook Spanner Wrench

▪ Chain & Strap Wrench

▪ Wheel Nut Wrench

▪ T-Type Socket Wrench

▪ T-shaped Driver

288
289
 KING TONY UNIT DRIVE Profile
1. A large contact surface provides a secure force
closure even for bolts whose sizes are out of the
tolerances.

2. Radiate distribution of the force on the bolt flanks,

reducing notch effect, which prevents the bolt from
being rounded.

3. Gentle torque transfer enables worn bolts to be

loosened.

4. Optimally distributed force up to 20 % higher

torques can be transferred.

The KING TONY UNIT DRIVE prevents the bolts form being
damaged by using of a wave form without any tipped or sharp
edges.
Enlarged, round contact surfaces ensure that torque is reliably
transferred - acting radiately, as it does, on the bolt.
Minimising notch effect prevents any damage to the bolt.

W rench 0 1 Ra w ma ter ia l 0 2 Hot f or g e 0 3B a r r eling

Made
0 4P olish ing 0 5B
P unch ing &
r oa ch ing 0 6M a r k ing 0 7 Hea t tr ea tment

0 8V ib r a ting 0 9 Sa nd b la st 1 0P la ting

Advanced
structure
saves time
There are more and more improved tool
Exce ed
oth er b r a nds 20%
structure comes out every year. King Tony 423
selects useful idea and engineering function
on developing new product within quality and
350
economic concern. Every piece of component
K IN G T O N Y O th er s
is designed for the comfort to users.
K IN G T O N Y speed w r ench is 20%
K ing T ony O ther b rand str ong er th a n oth er s.

290
 Ultra-Light Long
Combination Wrench
1061 PAT.
New forge technologies I-Beam
shank offers 20% lightweight and Sta nda r d 1060
better strength
15° open end reinforcement design
in slim profile
13° ring end high relief zone design
with thin wall access ability
10% UP 1061
Long shank for high leverage &
helps operators' hands from hot
spots
Chrome vanadium alloy steel
Metric size-DIN3113, ISO7738 2

New slimline I-Beam shank

offers superior strength
with less effort

2 3

13°

15°
3

More powerful open end 13 degree offset ring provides better

with big thumb point accessibility 3
delivers more torque

291
 Ultra-Light Long Combination Wrench & Set KT No. & D1

1061
▪ 15° open slimline type
▪ 13° ring end offset from shaft
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ DIN3113 / ISO7738
13˚
15° L

Size L g Size L g
KT NO. KT NO.
mm mm mm mm
1061-06 6 128 20 12 / 768 1061-19 19 281 210 12 / 96
1061-07 7 128 20 12 / 576 1061-20 20 301 260 8 / 48
1061-08 8 148 28 12 / 576 1061-21 21 301 260 8 / 48
1061-09 9 148 28 12 / 384 1061-22 22 319 305 8 / 48
1061-10 10 167 45 12 / 384 1061-23 23 319 305 8 / 48
1061-11 11 186 55 12 / 240 1061-24 24 338 380 5 / 40
1061-12 12 196 65 12 / 192 1061-25 25 358 443 5 / 40
1061-13 13 205 80 12 / 192 1061-26 26 358 437 5 / 40
1061-14 14 223 97 12 / 120 1061-27 27 383 523 5 / 40
1061-15 15 233 120 12 / 144 1061-28 28 383 507 5 / 40
1061-16 16 243 135 12 / 144 1061-29 29 408 621 5 / 20
1061-17 17 262 165 12 / 96 1061-30 30 408 630 5 / 20
1061-18 18 272 190 12 / 96 1061-32 32 433 778 5 / 20

► Pouch material : Tetoron

Kg
KT NO. PC. Contents

12C7MRN 7 8, 10, 11, 13, 14, 17, 19 0.77 1 / 24

12C8MRN 8 6, 7, 8, 9, 10, 11, 12, 13 0.77 1 / 24

12A0MRN 10 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 1.8 1 / 12

12A1MRN 11 1061 8, 10, 12, 13, 14, 16, 17, 18, 19, 22, 24 1.99 1 / 12

12A3MRN 13 8, 10, 11, 12, 13, 14, 15, 16 ,17, 18, 19, 22, 24 2.16 1 / 12

12A4MRN 14 8, 10, 11, 12, 13, 14, 15, 16 ,17, 18, 19, 21, 22, 24 2.44 1/8

6, 8, 10, 11, 12, 13, 14, 15, 16 ,17, 18, 19, 20, 21, 22,
12B4MRN 24 7 1/2
23, 24, 25, 26, 27, 28, 29, 30, 32

292
Combination Wrench KT No. & D1

1060 5060
▪ European slimline type ▪ Chrome plated
▪ 15° open end angle ▪ Metric size-DIN3113, ISO7738
▪ 15° ring end offset from shaft ▪ Inch size-ANSI/ASME B107.6
▪ Chrome vanadium alloy steel 15°
15°
Size L g
KT NO. L
mm mm
1060-55 5.5 105 16 12 / 504 Size L g
KT NO.
1060-06 6.0 105 18 12 / 504 inch mm
1060-07 7.0 115 20 12 / 504 5060-08 1/4 105 18 12 / 504
1060-08 8.0 125 25 12 / 504 5060-10 5/16 125 25 12 / 504
1060-09 9.0 135 34 12 / 504 5060-12 3/8 145 39 12 / 504
1060-10 10.0 145 39 12 / 504 5060-14 7/16 155 46 12 / 504
1060-11 11.0 155 46 12 / 504 5060-16 1/2 175 69 12 / 216
1060-12 12.0 165 56 12 / 216 5060-18 9/16 185 80 12 / 216
1060-13 13.0 175 69 12 / 216 5060-20 5/8 205 111 12 / 192
1060-14 14.0 185 80 12 / 216 5060-22 11/16 215 119 12 / 192
1060-15 15.0 195 93 12 / 192 5060-24 3/4 235 158 12 / 144
1060-16 16.0 205 111 12 / 192 5060-26 13/16 255 203 12 / 96
1060-17 17.0 215 119 12 / 192 5060-28 7/8 265 220 12 / 96
1060-18 18.0 225 138 12 / 144 5060-30 15/16 285 287 6 / 54
1060-19 19.0 235 158 12 / 144 5060-32 1 295 326 6 / 54
1060-20 20.0 245 182 12 / 144 5060-34 1-1/16 315 371 6 / 54
1060-21 21.0 255 203 12 / 96 5060-36 1-1/8 335 456 6 / 48
1060-22 22.0 265 225 12 / 96 5060-40 1-1/4 365 557 6 / 48
1060-23 23.0 275 251 12 / 96
1060-24 24.0 285 287 6 / 54
1060-25 25.0 295 326 6 / 54
1060-26 26.0 305 344 6 / 54
1060-27 27.0 315 371 6 / 54
1060-28 28.0 325 387 6 / 48
1060-29 29.0 335 456 6 / 48
1060-30 30.0 345 514 6 / 48
1060-32 32.0 365 557 6 / 48

1071 5071
▪ Jumbo type
▪ 15° open end angle
15°
15°

▪ 15° ring end offset from shaft

L 1071-33~50
5071-42~64
▪ High quality steel
▪ Polished, chrome plated 15°

▪ Metric size-DIN3113, ISO7738 15°

1071-55~85
▪ Inch size-ANSI/ASME B107.6 L

Size L g Size L
KT NO. KT NO. g
mm mm inch mm
1071-33 33 410 765 5 / 20 5071-42 1-5/16 410 760 5 / 20
1071-34 34 410 745 5 / 20 5071-44 1-3/8 425 970 5 / 20
1071-35 35 425 960 5 / 20 5071-46 1-7/16 425 950 5 / 20
1071-36 36 425 960 5 / 20 5071-48 1-1/2 455 1150 5 / 20
1071-38 38 455 1155 5 / 20 5071-50 1-9/16 495 1546 5 / 15
1071-41 41 495 1402 5 / 15 5071-52 1-5/8 495 1402 5 / 15
1071-42 42 495 1394 5 / 15 5071-54 1-11/16 495 1432 5 / 15
1071-44 44 495 1479 5 / 15 5071-56 1-3/4 495 1419 5 / 15
1071-46 46 495 1515 5 / 15 5071-58 1-13/16 495 1478 5 / 15
1071-48 48 563 2550 5 / 10 5071-60 1-7/8 563 2540 5 / 10
1071-50 50 563 2550 5 / 10 5071-62 1-15/16 563 2550 5 / 10
Size L g 5071-64 2 563 2540 5 / 10
KT NO. mm mm
1071-55 55 616 2520 5
1071-60 60 657 3000 5
1071-65 65 678 3300 5
1071-70 70 715 5760 2
1071-75 75 715 5770 2
1071-80 80 745 7700 2
1071-85 85 745 7700 2
293
 Combination Wrench Set
► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

Kg
KT NO. PC. Contents Package
1207MR 7 10, 11, 12, 13, 14, 17, 19 Nylon 0.60 1 / 30
1208MR 8 10, 11, 12, 13, 14, 17, 19, 22 Nylon 0.65 1 / 24
1210MR 10 8, 10, 12, 13, 14, 17, 19, 21, 22, 24 Nylon 1.38 1 / 16
1211MR 11 8, 9, 10, 11, 12, 13, 14, 17, 19, 22, 24 Nylon 1.4 1 / 16
1212MR 12 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22 Nylon 1.03 1/ 16
1214MR 14 10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24, 27, 30, 32 Nylon 2.70 1/8
1214MR01 14 10, 11, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 Nylon 2.70 1/8
1215MR 14 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24 Nylon 1.63 1 / 12
1215MR01 14 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 Nylon 1.63 1 / 12
1060
1215MR02 15 6, 7, 8, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32 Nylon 2.92 1/8
1211MRN 11 8, 9, 10, 11, 12, 13, 14, 17, 19, 22, 24 Tetoron 1.4 1 / 16
1214MRN01 14 10, 11, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 Tetoron 2.70 1/8
1214MRN05 14 6, 7 ,8 ,9 ,10 ,11 ,12 ,13 ,14 ,15, 16, 17, 18, 19 Tetoron 1.24 1 / 12
1215MRN01 14 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 Tetoron 1.63 1 / 12
1215MRN02 15 6, 7, 8, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32 Tetoron 2.92 1/8
1218MR01 18 Nylon 2.50 1/9
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24
1218MRN 18 Tetoron 2.50 1/9
1226MR 26 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, Nylon 2.93 1/6
1226MRN 26 24, 25, 26, 27, 28, 29, 30, 32 Tetoron 2.93 1/6

1207SR 7 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Nylon 0.60 1 / 30

1211SR 11 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, 15/16 Nylon 1.4 1 / 16

1211SR01 11 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 1 Nylon 1.4 1 / 16

1211SR02 11 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Nylon 1.4 1 / 16

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,
1214SR 14 5060 Nylon 2.70 1/8
15/16, 1, 1-1/8, 1-1/4
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1,
1214SR01 14 Nylon 3.23 1/8
1-1/16, 1-1/8, 1-1/4
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,
1216SR 16 Nylon 3.44 1/8
15/16, 1, 1-1/16, 1-1/8, 1-1/4
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,
1213SRN 13 Tetoron 1.96 1 / 10
15/16, 1
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1,
1214SRN01 14 Tetoron 3.54 1/8
1-1/16, 1-1/8, 1-1/4

1296MRN 6 34, 36, 38, 41, 46, 50 Tetoron 8.87 1/2

1071
1060 7, 8, 10, 11, 12, 13, 14, 15, 16, 17 19, 22
1224CRN 24 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, Tetoron 2.93 1/6
5060 15/16

294
Offset Combination Wrench
KT No. & D1

1067
▪ Chrome vanadium alloy steel 15 °
▪ Offset ring ideal for deep-
seated nuts or bolts
▪ 15° open end angle °
9
°
70
▪ Chrome plated L
▪ DIN3113 / ISO 7738 / ISO 3318

Size L g Size L g
KT NO. KT NO.
mm mm mm mm
1067-06 6 105 18 10 / 640 1067-19 19 235 192 10 / 120
1067-07 7 115 23 10 / 640 1067-20 20 235 256 10 / 80
1067-08 8 125 25 10 / 640 1067-21 21 265 250 10 / 80
1067-09 9 135 36 10 / 480 1067-22 22 265 256 10 / 80
1067-10 10 145 42 6 / 288 1067-23 23 290 316 8 / 64
1067-11 11 155 55 12 / 240 1067-24 24 290 307 8 / 64
1067-12 12 165 61 10 / 200 1067-25 25 300 327 10 / 60
1067-13 13 175 79 8 / 160 1067-26 26 320 423 10 / 40
1067-14 14 185 93 10 / 160 1067-27 27 320 402 10 / 40
1067-15 15 195 110 10 / 160 1067-28 28 330 494 10 / 40
1067-16 16 205 119 10 / 160 1067-29 29 350 402 6 / 48
1067-17 17 215 148 8 / 128 1067-30 30 350 522 6 / 48
1067-18 18 225 158 12 / 144 1067-32 32 370 621 4 / 32

Offset Combination Wrench

KT No. & D1

1063 5063
▪ Chrome vanadium alloy steel
▪ Offset ring ideal for deep-seated nuts or bolts
▪ 15° open end angle
▪ Chrome plated
▪ Metric size - DIN3113 / ISO 7738 / ISO 3318
Size L g
KT NO. mm mm
1063-06 6 110 19 20 / 360
1063-08 8 130 32 20 / 320
1063-10 10 150 46 20 / 320
15 °
1063-11 11 160 59 20 / 320
1063-12 12 170 73 20 / 240
1063-13 13 180 78 20 / 240
1063-14 14 190 103 15 / 240
1063-15 15 200 118 15 / 180 9 °
1063-16 16 210 135 15 / 180 45 °
1063-17 17 220 153 15 / 120 L
1063-18 18 230 179 12 / 96
1063-19 19 240 198 12 / 96
Size L g
1063-21 21 260 224 10 / 80 KT NO. inch mm
1063-22 22 270 258 10 / 80
1063-27 27 320 448 6 / 48 5063-14 7/16 160 59 20 / 320
1063-30 30 350 552 6 / 48 5063-16 1/2 180 78 20 / 240
1063-32 32 370 683 6 / 48 5063-18 9/16 190 103 15 / 240

295
 Offset Combination Wrench Set
► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

Kg
KT NO. PC. Contents Package
1271MR 11 Nylon
6, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22 1.16 1 / 15
1271MRN 11 Tetoron
1272MR 12 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22 Nylon 1.21 1 / 15
1272MR01 12 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22 Nylon 1.38 1/9
1067
1275MR 15 Nylon
6, 7, 8, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32 3.18 1/8
1275MRN 15 Tetoron
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
1266MR 26 Nylon 6.85 1/2
24, 25, 26, 27, 28, 29, 30, 32

Stubby Combination Wrench & Set

• Pouch material : Nylon KT No. & D1

10D0
▪ Short pattern design enables
D2
greater access in confined spaces D1
▪ Chrome vanadium alloy steel
▪ Chrome plated H1
H2
15°
▪ DIN3113
L
Size L g
KT NO. D1 D2 H1 H2
mm mm
10D0-08 8 18.1 13.8 4.6 6.0 85 20 20 / 360
10D0-09 9 19.3 14.5 4.8 6.4 90 25 20 / 360
10D0-10 10 20.5 15.1 4.8 6.4 95 27 20 / 360
10D0-11 11 22.7 16.7 5.9 7.9 100 45 20 / 360
10D0-12 12 24.7 18.0 6.2 8.3 105 49 20 / 360
10D0-13 13 27.2 19.1 6.5 8.7 110 59 20 / 360
10D0-14 14 28.8 21.4 7.0 9.2 115 65 15 / 270
10D0-15 15 31.0 22.4 7.4 9.7 120 73 15 / 270
10D0-16 16 33.0 23.8 7.8 10.3 125 85 15 / 270
10D0-17 17 35.0 26.2 8.1 10.7 130 116 15 / 180
10D0-18 18 37.0 27.3 8.6 11.3 135 123 15 / 180
10D0-19 19 39.0 28.6 9.0 11.8 140 135 12 / 144

Kg
KT NO. PC. Contents

1282MR 12 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 1.03 1 / 24
10D0

► Pouch material : Nylon

296
Single Open End Wrench
Please wear proper safety gear while working.

10F0
▪ Features: The open end is thicker for very high tightening
torques. examples: public work, rail worksite, naval
construction, agriculture, oil platforms, metallic construction
▪ Hanging hole at end of handle: wrenches stored on panel
or hung to avoid loss or fall
▪ Chrome vanadium alloy steel L
▪ Finished with phosphate sunk
▪ DIN 894

Size L g
KT NO. mm mm Size L g
KT NO. mm mm
10F0-17P 17 178 107 10 / 120
10F0-19P 19 178 107 10 / 120 10F0-36P 36 317 556 5 / 30
10F0-21P 21 203 161 10 / 100 10F0-38P 38 320 740 5 / 30
10F0-22P 22 203 161 10 / 100 10F0-41P 41 340 875 4 / 24
10F0-23P 23 220 203 8 / 80 10F0-46P 46 395 1060 3 / 12
10F0-24P 24 220 203 8 / 80 10F0-50P 50 425 1402 1 / 12
10F0-26P 26 240 290 6 / 60 10F0-55P 55 425 1403 1 / 12
10F0-27P 27 240 290 6 / 60 10F0-60P 60 470 2544 1/6
10F0-29P 29 267 341 6 / 48 10F0-65P 65 470 2441 1/6
10F0-30P 30 267 335 6 / 48 10F0-70P 70 500 3457 1/6
10F0-32P 32 285 410 5 / 30 10F0-75P 75 500 3333 1/6

Open End Wrench

KT No. & D1

1900 5900
▪ European slimline type
▪ 15° open end angle
15°

▪ Chrome vanadium alloy steel

▪ Chrome plated
L
▪ Metric size-DIN3110
▪ Inch size-ANSI / ASME B107.6
Size L g Size L g
KT NO. KT NO.
mm mm mm mm
19005507 5.5 x 7 123 28 12 / 576 19002430 24 x 30 263 350 6 / 72
19000607 6x7 123 28 12 / 576 19002528 25 x 28 279 373 6 / 48
19000708 7x8 140 36 12 / 576 19002632 26 x 32 298 457 6 / 48
19000809 8x9 140 39 12 / 576 19002729 27 x 29 298 458 6 / 48
19000810 8 x 10 140 38 12 / 576 19002730 27 x 30 298 481 6 / 48
19000911 9 x 11 156 55 12 / 288 19002732 27 x 32 298 481 6 / 48
19001011 10 x 11 156 65 12 / 288 19003032 30 x 32 298 481 6 / 48
19001012 10 x 12 156 65 12 / 288 19003036 30 x 36 351 683 6 / 36
19001113 11 x 13 172 78 12 / 288 19003236 32 x 36 351 700 5 / 30
19001213 12 x 13 172 86 12 / 288 19003436 34 x 36 351 723 5 / 30
19001214 12 x 14 172 78 12 / 288 19004146 41 x 46 430 1395 4 / 16
19001314 13 x 14 172 78 12 / 288
19001317 13 x 17 195 124 12 / 192 Size L g
KT NO. inch mm
19001415 14 x 15 188.5 114 12 / 192
19001417 14 x 17 195 146 12 / 192 59000810 1/4 x 5/16 123 28 12 / 576
19001617 16 x 17 204 146 12 / 192 59001012 5/16 x 3/8 140 39 12 / 576
19001618 16 x 18 221 165 12 / 144 59001214 3/8 x 7/16 156 65 12 / 288
19001719 17 x 19 221 177 12 / 144 59001416 7/16 x 1/2 172 78 12 / 288
19001819 18 x 19 221 178 12 / 144 59001618 1/2 x 9/16 172 78 12 / 288
19001921 19 x 21 237 210 12 / 144 59001820 9/16 x 5/8 188.5 114 12 / 192
19001922 19 x 22 237 210 12 / 144 59002022 5/8 x 11/16 204 146 12 / 192
19002022 20 x 22 237 210 12 / 144 59002224 11/16 x 3/4 221 177 12 / 144
19002123 21 x 23 247 258 6 / 72 59002628 13/16 x 7/8 237 210 12 / 144
19002224 22 x 24 247 258 6 / 72 59003032 15/16 x 1 247 258 6 / 72
19002326 23 x 26 263 281 6 / 72 59003034 15/16 x 1-1/16 263 281 6 / 72
19002426 24 x 26 263 281 6 / 72 59003236 1 x 1-1/8 279 373 6 / 48
19002427 24 x 27 263 326 6 / 72 59003640 1-1/8 x 1-1/4 298 481 6 / 48

297
 Open End Wrench Set
► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

Kg
KT NO. PC. Contents Package
1106MR 6 8 x 9, 10 x 12, 12 x 14, 14 x 17, 17 x 19, 21 x 23 Nylon 0.83 1 / 24
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
1108MR 8 Nylon 0.91 1 / 24
20 x 22
1900 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
1110MR 10 Nylon 1.67 1 / 16
20 x 22, 24 x 27, 25 x 28
1112MR 12 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, Nylon
2.35 1 / 10
1112MRN 12 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32 Tetoron
1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 9/16 x 5/8,
1108SR 8 Nylon 0.91 1 / 24
5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8
1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 9/16 x 5/8,
1110SR 10 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1-1/16, Nylon 1.67 1 / 16
5900 1 x 1-1/8
1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 9/16 x 5/8,
1112SR 12 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, Nylon 2.35 1 / 10
15/16 x 1-1/16, 1 x 1-1/8, 1-1/8 x 1-1/4

45° Offset Ring Wrench KT No. & D1

1960 5960
▪ 45° offset ring
▪ Thin wall rings
▪ Chrome vanadium alloy steel L

▪ Chrome plated
▪ Metric size-DIN838
▪ Inch size-ANSI / ASME B107.6 45°

Size L g Size L g
KT NO. KT NO.
mm mm mm / inch mm
19600607 6x7 165 45 12 / 360 19601921 19 x 21 270 340 6 / 72
19600809 8x9 175 53 12 / 360 19602022 20 x 22 270 340 6 / 72
19600810 8 x 10 185 53 12 / 360 19602224 22 x 24 320 479 6 / 48
19601011 10 x 11 195 60 12 / 360 19602326 23 x 26 360 465 6 / 48
19601012 10 x 12 185 60 12 / 360 19602427 24 x 27 360 479 6 / 48
19601113 11 x 13 205 62 12 / 240 19602732 27 x 32 385 580 6 / 36
19601213 12 x 13 205 62 12 / 240 19603032 30 x 32 392 650 6 / 36
19601214 12 x 14 220 100 12 / 240 59601214 3/8 x 7/16 185 53 12 / 360
19601415 14 x 15 235 151 12 / 144 59601618 1/2 x 9/16 220 100 12 / 240
19601417 14 x 17 235 151 12 / 144 59602022 5/8 x 11/16 240 151 12 / 144
19601617 16 x 17 240 151 12 / 144 59602428 3/4 x 7/8 270 340 6 / 72
19601719 17 x 19 250 221 6 / 72 59603032 15/16 x 1 360 465 6 / 48
19601819 18 x 19 250 222 6 / 72

298
45° Offset Ring Wrench & Set KT No. & D1

1961
▪ Mini type
▪ 45° offset ring
L
▪ Thin wall rings
▪ Chrome vanadium steel
▪ Chrome plated
▪ Metric size-DIN838
45°

Size L g Size L g
KT NO. KT NO.
mm mm mm mm
19610809 8x9 112 27.6 12 / 336 19611415 14 x 15 140 84.0 12 / 240
19611011 10 x 11 115 42.2 12 / 336 19611617 16 x 17 150 96.8 10 / 200
19611213 12 x 13 130 57.6 12 / 240 19611819 18 x 19 157 113.6 6 / 120

► Pouch material : Nylon

Kg
KT NO. PC. Contents
1606MR 6 10 x 12, 12 x 14, 14 x 17, 17 x 19, 19 x 21, 23 x 26 1.6 1 / 16
1960
1609MR 9 8 x 9, 10 x 12, 11 x 13, 12 x 14, 14 x 17, 17 x 19, 19 x 21, 22 x 24, 23 x 26 1.93 1/8

1626MR 6 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19 0.53 1 / 24

1961

299
 75° Offset Ring Wrench & Set KT No. & D1

1970 5970
▪ European slimline type ▪ Chrome plated
KT NO. Size L g ▪ 75° deep ring offset ▪ Metric size-DIN838
mm mm
▪ Thin wall rings ▪ Inch size-ANSI / ASME
19700607 6x7 168 43 12 / 360 ▪ Chrome vanadium alloy steel B107.6
19700809 8x9 183 62 12 / 360
19700810 8 x 10 183 62 12 / 360
19701011 10 x 11 198 88 12 / 240
19701012 10 x 12 198 88 12 / 240
19701113 11 x 13 217 131 12 / 144 75°

19701213 12 x 13 217 131 12 / 144 L

19701214 12 x 14 217 131 12 / 144

19701314 13 x 14 217 131 12 / 144 Size L g
KT NO. inch mm
19701415 14 x 15 239 152 12 / 144
19701417 14 x 17 260 186 6 / 96 59700810 1/4 x 5/16 168 43 12 / 360
19701617 16 x 17 260 189 6 / 96 59701012 5/16 x 3/8 183 62 12 / 360
19701719 17 x 19 292 240 6 / 72 59701214 3/8 x 7/16 198 88 12 / 240
19701819 18 x 19 292 240 6 / 72 59701416 7/16 x 1/2 217 131 12 / 144
19701921 19 x 21 318 330 6 / 60 59701618 1/2 x 9/16 217 134 12 / 144
19701922 19 x 22 318 330 6 / 60 59701820 9/16 x 5/8 260 152 12 / 96
19702022 20 x 22 318 330 6 / 60 59702022 5/8 x 11/16 260 189 6 / 96
19702123 21 x 23 326.5 362 6 / 60 59702224 11/16 x 3/4 292 240 6 / 96
19702224 22 x 24 326 362 6 / 60 59702428 3/4 x 7/8 318 330 6 / 60
19702326 23 x 26 344 436 6 / 48 59702628 13/16 x 7/8 326.5 330 6 / 60
19702426 24 x 26 329 436 6 / 48 59703032 15/16 x 1 329 436 6 / 48
19702427 24 x 27 329 436 6 / 48 59703436 1-1/16 x 1-1/8 347 488 6 / 48
19702528 25 x 28 347 488 6 / 48 59703640 1-1/8 x 1-1/4 365 679 6 / 48
19703032 30 x 32 362 600 6 / 36 59703842 1-3/16 x 1-5/16 362 636 5 / 30

► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

Kg
KT NO. PC. Contents Package

1706MR 6 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 Nylon 0.80 1 / 24

6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
1708MR 8 Nylon 1.52 1 / 12
21 x 23
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
1708MR01 8 Nylon 1.52 1 / 12
20 x 22
1970
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
1710MR 10 Nylon 2.60 1/8
21 x 23, 24 x 27, 30 x 32
1712MR 12 Nylon 3.32 1/6
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19,
20 x 22, 21 x 23, 24 x 26, 25 x 28, 30 x 32
1712MRN 12 Tetoron 3.32 1/6

1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8,
1707SR 7 Nylon 2.0 1 / 12
5970 15/16 x 1, 1-1/16 x 1-1/8

300
Straight Ring Wrench & Set KT No. & D1

19C0
▪ Thin wall rings
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ DIN837
Size L g
KT NO. mm mm L

19C00607 6x7 121 17 20 / 480

19C00809 8x9 137 27 20 / 480
19C01011 10 x 11 154 51 20 / 320
19C01213 12 x 13 164 70 20 / 240
19C01415 14 x 15 182 92 20 / 240
19C01617 16 x 17 211 118 12 / 144
19C01819 18 x 19 226 151 12 / 144
19C02022 20 x 22 240 187 10 / 120
19C02123 21 x 23 255 242 10 / 120
19C02426 24 x 26 270 290 6 / 72
19C02528 25 x 28 285 339 6 / 72
19C03032 30 x 32 335 520 5 / 40

► Pouch material : Nylon

Kg
KT NO. PC. Contents

1C08MR 6 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22 0.79 1 / 24

19C0 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,
1C12MR 8 2.23 1 / 12
24 x 26, 25 x 28, 30 x 32

0° Offset Ring Wrench

19B0
▪ Ideal for crowded or confined spaces
▪ Ultra-compact ring head
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ DIN 3113 D1 D2
Size D1 D2 L g
KT NO. L
mm mm mm mm
19B00810 8 x 10 12.5 15 235 72 12 / 240
19B01011 10 x 11 14.3 17 291 95 12 / 192
19B01012 10 x 12 14.3 17 291 95 12 / 192
19B01113 11 x 13 17.8 20.3 328 157 12 / 120
19B01214 12 x 14 17.8 20.3 328 157 12 / 120
19B01315 13 x 15 20.2 23.3 368 217 12 / 96
19B01417 14 x 17 20.2 23.3 368 217 12 / 96
19B01618 16 x 18 23.7 26.6 407 284 12 / 72
19B01719 17 x 19 23.7 26.6 407 284 12 / 72
19B01921 19 x 21 27.5 29.7 415 376 8 / 64
19B02224 22 x 24 31.3 34.0 430 482 6 / 48

301
 0° Offset Ring Wrench Set

► Pouch material : Tetoron

Kg
KT NO. PC. Contents

1F06MRN 6 10 x 11, 12 x 14, 13 x 15, 16 x 18, 17 x 19, 22 x 24 1.69 1/8

19B0

Half Moon Ring Wrench & Set

1950
▪ Short pattern design enables
greater access in confined spaces
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ DIN3113
S1 S2
H

D2

H1 H2

Size D1 D2 L H1 H2 H g
KT NO. mm mm mm mm mm mm mm
19500810 8 x 10 15.6 14.3 137 6.5 6.2 42 40 12 / 288
19501012 10 x 12 15.6 18.2 141 6.6 6.5 50 55 12 / 288
19501113 11 x 13 18.2 21.0 166 8.2 8.0 63 93 8 / 128
19501214 12 x 14 18.2 21.0 166 8.2 8.0 63 94 8 / 128
19501315 13 x 15 22.0 25.0 190 9.2 8.2 75 126 6 / 72
19501417 14 x 17 22.0 25.0 190 9.2 8.2 75 126 6 / 72
19501618 16 x 18 25.5 28.0 220 9.6 8.8 79 156 6 / 72
19501719 17 x 19 25.5 28.0 220 9.6 8.8 79 174 6 / 72
19501922 19 x 22 28.6 32.5 256 11.1 10.1 91 255 6 / 48

9-1905MR
5
PC.

Kg 0.82 1 / 10
KT NO. Contents

10 x 12, 11 x 13, 14 x 17, 16 x 18,

9-1905MR 1950 19 x 22

302
Half Moon Ring Wrench
1951
▪ American type
▪ Specially designed for starter bolts
▪ Used mainly in automotive applications for
starter motors, inlet and exhaust manifolds
▪ Chrome vanadium alloy steel
▪ Chrome plated

S1 S2
H

D1 D2

H1 H2

Size D1 D2 L H1 H2 H g
KT NO. mm mm mm mm mm mm mm
19510810 8 x 10 12.5 16.5 125 7.0 7.4 36 48.0 12 / 240
19511011 10 x 11 17.5 19 149 8.0 8.5 46 71.4 12 / 240
19511012 10 x 12 17.5 19.0 149 8.0 8.5 46 67.8 12 / 240
19511113 11 x 13 17.5 19.0 149 8.0 8.5 46 76.0 12 / 240
19511416 14 x 16 21.4 23.4 169 8.2 8.4 50 99.1 10 / 120
19511214 12 x 14 21.4 23.4 169 8.2 8.4 50 95.4 10 / 120
19511517 15 x 17 23.5 27.0 194 9.5 10.0 56 151.2 8 / 96
19511719 17 x 19 26.5 27.7 194 9.2 9.6 56 141.4 8 / 96
19511922 19 x 22 29.0 32.3 225 11.0 12.0 66 235.0 5 / 60

Crowfoot Wrench
1031
▪ 12 points
▪ Chrome vanadium alloy steel
▪ Chrome plated

Size L g
KT NO. Drive square
mm mm
1031-10R 10 3/8" 37.3 40 12 / 192
1031-11R 11 3/8" 37.3 40 12 / 192
1031-12R 12 3/8" 37.3 40 12 / 192
1031-13R 13 3/8" 37.3 40 12 / 192
1031-14R 14 3/8" 42.3 42 12 / 192
1031-15R 15 3/8" 42.3 44 12 / 192
1031-16R 16 3/8" 42.3 48 12 / 192
1031-17R 17 3/8" 46.0 68 12 / 192
1031-18R 18 3/8" 46.0 63 12 / 192
1031-19R 19 3/8" 46.0 63 12 / 192
1031-22R 22 1/2" 55.0 82 15 / 180
1031-24R 24 1/2" 55.0 74 15 / 180 • Use to reach limit place with
1031-26R 26 1/2" 61.0 105 15 / 180 extension bar
1031-27R 27 1/2" 61.0 98 15 / 180 • Use with torque wrench and 90°
1031-30R 30 1/2" 68.7 136 12 / 144 extension bar, will not effectively
1031-32R 32 1/2" 69.7 136 12 / 144 change the torque value

303
 Star Box End Wrench & Set
KT No. & D1

1920
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ ANSI / ASME B107.6

L g
KT NO. Size mm
19200608 E6 x E8 114.0 18.8 12 / 504
19200711 E7 x E11 126.5 27.4 12 / 504
19201012 E10 x E12 142.5 32.6 12 / 384
L
19201418 E14 x E18 183.0 86.2 12 / 240
19201622 E16 x E22 205.0 119.0 12 / 192
19202024 E20 x E24 225.0 172.2 12 / 144

1406PR

6
KT NO. Contents
Kg 0.46 1 / 15 PC.

E6 x E8, E7 x E11, E10 x E12, E14 x E18,

1920 E16 x E22, E20 x E24

Flare Nut Wrench KT No. & D1

1930 5930
▪ 6 points
▪ 12° ring offset
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ Metric size-DIN 3118
▪ Inch size-ANSI / ASME B107.6

Size L g
KT NO. mm mm
12°
19300810 8 x 10 130 53 12 / 216
L
19300911 9 x 11 150 55 12 / 216
19301011 10 x 11 150 78 12 / 192
19301012 10 x 12 150 74 12 / 192 Size L g
KT NO.
19301113 11 x 13 170 106 12 / 144 inch mm
19301213 12 x 13 170 104 12 / 144 59301012 5/16 x 3/8 130 53 12 / 216
19301214 12 x 14 170 102 12 / 144 59301214 3/8 x 7/16 150 78 12 / 192
19301315 13 x 15 178 125 12 / 144 59301618 1/2 x 9/16 180 102 12 / 144
19301417 14 x 17 190 132 12 / 144 59301820 9/16 x 5/8 190 132 12 / 144
19301719 17 x 19 210 170 8 / 128 59302224 11/16 x 3/4 210 170 6 / 96
19301922 19 x 22 230 218 9 / 108 59302428 3/4 x 7/8 230 218 6 / 72

304
Flare Nut Wrench & Set
1931
▪ 12 points
▪ 12° ring offset
▪ Chrome vanadium alloy steel
▪ Chrome plated
▪ DIN 3118

Size L g
KT NO. mm mm
19312224 22 x 24 250 310 6 / 72
19312427 24 x 27 270 359 6 / 48 12°
19313032 30 x 32 290 471 5 / 40 L

► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

Kg
KT NO. PC. Contents Package
1306MR 6 Nylon 0.90 1 / 30
8 x 10, 10 x 12, 11 x 13, 12 x 14, 17 x 19, 19 x 22
1306MRN 6 1930 Tetoron 0.90 1 / 30
5/16 x 3/8, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4,
1306SR 6 Nylon 0.86 1 / 30
5930 3/4 x 7/8

1930 8 x 10, 11 x 13, 12 x 14, 17 x 19

1306CR 6 Nylon 0.74 1 / 12
5930 3/8 x 7/16, 1/2 x 9/16

305
 Flexible Head Wrench & Set KT No. & D1

1020
▪ Combination flexible head wrench with 12 points thin wall socket
▪ 180° swiveling head for better accessibility
▪ Chrome vanadium alloy steel
▪ Chrome plated
Size L g
KT NO. mm mm
1020-08 8 170 65 10 / 180
1020-09 9 170 65 10 / 180
1020-10 10 180 75 10 / 160 180 °
1020-11 11 188 105 10 / 160
1020-12 12 190 114 10 / 120
1020-13 13 206 140 10 / 120
1020-14 14 225 186 10 / 120
1020-15 15 225 195 6 / 72
L
1020-16 16 234 234 6 / 72
1020-17 17 234 234 4 / 48
1020-18 18 252 307 4 / 48
1020-19 19 250 307 4 / 48

1910
▪ Double end flexible head wrench with 12 points thin wall socket
▪ 180° swiveling head for better accessibility
▪ Chrome vanadium alloy steel
▪ Chrome plated
Size L g
KT NO. mm mm 18 0°
18 0°
19100607 6x7 182 72 12 / 216
19100809 8x9 182 78 12 / 216
19100810 8 x 10 185 85 10 / 160
19101011 10 x 11 200 115 10 / 160
19101012 10 x 12 205 119 10 / 120
19101213 12 x 13 220 155 10 / 120
19101214 12 x 14 225 175 10 / 80 L
19101415 14 x 15 240 235 10 / 120
19101417 14 x 17 244 245 10 / 120
19101617 16 x 17 259 330 10 / 80
19101719 17 x 19 260 330 10 / 80
19101819 18 x 19 275 410 6 / 54
19101921 19 x 21 300 535 6 / 36
19102022 20 x 22 305 595 6 / 36
19102123 21 x 23 305 640 6 / 36
19102427 24 x 27 335 775 6 / 24

► Pouch material : Nylon

Kg
KT NO. PC. Contents

1B06MR 6 10, 12, 13, 14, 17, 19 1.06 1 / 24

1020
1A06MR 6 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19 1.32 1 / 16
1910

306
Slogging Wrench
Please wear proper safety gear while working.

10A0 10B0
▪ Open end slogging ▪ Ring slogging
▪ Finished with phosphate sunk ▪ Finished with phosphate sunk
▪ DIN 133 ▪ DIN 7444

D
D

L L

H
H

Size L D H g Size L D H g
KT NO. KT NO.
mm mm mm mm mm mm mm mm
10A0-24 24 178 52 15 302 6 / 72 10B0-24 24 162 42 16 239 6 / 72
10A0-27 27 180 55 16 320 6 / 72 10B0-26 26 180 46 17 247 6 / 72
10A0-30 30 190 60 16 400 6 / 60 10B0-27 27 180 46 17 247 6 / 72
10A0-32 32 190 61 17 418 6 / 60 10B0-30 30 190 52 18 354 6 / 72
10A0-36 36 215 72 17 600 6 / 24 10B0-32 32 190 52 18 404 6 / 60
10A0-41 41 233 83 19 902 5 / 20 10B0-36 36 205 58 19 499 6 / 36
10A0-46 46 255 94 20 1122 4 / 16 10B0-41 41 230 66 21 658 6 / 24
10A0-50 50 275 105 22 1555 2 / 16 10B0-46 46 240 74 23 886 4 / 16
10A0-55 55 298 115 24 2015 2 / 12 10B0-50 50 250 78 24 1125 4 / 16
10A0-60 60 320 127 24 2515 1 / 10 10B0-55 55 265 85 25 1330 2 / 16
10A0-65 65 340 138 27 3260 1/8 10B0-60 60 275 92 26 1245 2 / 12
10A0-70 70 370 156 32 4390 1/5 10B0-65 65 295 100 27 1875 2 / 12
10A0-75 75 372 153 31 4140 1/5 10B0-70 70 325 109 33 2965 1/8
10A0-80 80 395 175 33 6820 1/4 10B0-75 75 325 111 34 2735 1/8
10A0-85 85 395 175 33 6300 1/4 10B0-80 80 345 126 36 3675 1/6
10A0-90 90 440 197 38 9270 1/2 10B0-85 85 345 130 36 3710 1/6
10A0-95 95 440 197 38 8700 1/2 10B0-90 90 380 152 40 5850 1/4
10A0-A0 100 480 230 45 10500 1/2 10B0-95 95 380 152 40 5350 1/4
10A0-A5 105 480 230 45 10300 1/2 10B0-A0 100 410 155 43 6445 1/4
10A0-B0 110 505 238 47 14420 1/1 10B0-A5 105 415 172 45 6500 1/3
10A0-B5 115 505 250 53 14420 1/1 10B0-B0 110 440 172 47 8000 1/3
10A0-C0 120 530 258 53 15450 1/1 10B0-B5 115 440 172 47 7500 1/3
10A0-C5 125 515 251 43 15015 1/1 10B0-C0 120 480 194 53 9000 1/2

Heavy Duty Offset Ring Wrench

10C0
▪ To be used with extension tubes item "11"
▪ Chrome vanadium alloy steel
▪ Chrome plated
Size L Applied g
KT NO. mm mm tube
10C0-24 24 178 111946 450 6 / 48
10C0-27 27 188 111946 500 6 / 48
10C0-30 30 198 111946 580 4 / 36
10C0-32 32 233 112261 810 4 / 24
10C0-36 36 241 112261 870 4 / 24
10C0-41 41 260 112261 1100 2 / 16
10C0-46 46 277 112576 1400 2 / 16
10C0-50 50 287 112576 1600 2 / 16
10C0-55 55 298 112576 1800 1 / 12
10C0-60 60 345 113086 2800 1/9
10C0-65 65 356 113086 3200 1/4

307
 Heavy Duty Offset Ring Wrench
11
▪ Tube for item 10C0
▪ Chrome plated
L g
KT NO. Applied wrench size
mm mm

111946 19 460 24mm, 27mm, 30mm 1050 20

112261 22 610 32mm, 36mm, 41mm 1450 16

112576 24 760 46mm, 50mm, 55mm 2400 6

113086 30 860 60mm, 65mm 2610 4

End Tubular Wrench

19A0
▪ Chrome vanadium alloy steel
▪ Chrome plated

• Double end socket

wrench for the hollow L
tube design, a long- L2 L3
type screw may be
used.
D1

KT NO. D1 D2 L2 L3 L D2 g
mm mm mm mm mm mm
19A00607 6x7 10 11 5 6 105 44 30 / 180
19A00809 8x9 13 14 6 7 110 60 30 / 180
19A01011 10 x 11 15 16 7.5 8 120 79 24 / 144
19A01213 12 x 13 18 19 9 9.5 140 142 18 / 144
19A01415 14 x 15 20 22 10 11 145 138 12 / 96
19A01617 16 x 17 23 24 11 12 155 190 10 / 90
19A01819 18 x 19 25 26 13 15 165 243 8 / 72
19A02022 20 x 22 28 30 15 16 170 288 8 / 72
19A02123 21 x 23 29 31 15 17 185 318 6 / 54
19A02426 24 x 26 33 35 19 21 190 396 4 / 36
19A02528 25 x 28 34 37 19 21 205 511 4 / 24
19A02729 27 x 29 37 39 21 22 210 595 2 / 12
19A03032 30 x 32 40 42 22 26 210 671 2 / 12

19A0-09 19A0-15
▪ Chrome vanadium alloy steel
▪ Chrome plated

19A0-09
Ø2
Ø4
Ø3

Ø1

19A0-15
Ø1

Ø2
Ø

L Ø Ø1 Ø2 Ø3 Ø4 Applied to socket
KT NO. mm mm mm mm mm mm wrench sizes
19A0-09 220 7.8 6.75 4.75 5.75 2.8 19A00607~19A02022
19A0-15 300 12.7 11.75 9.75 - - 19A02123~19A03032

308
 Flexible Speed Wrench
• Metric size from 8 ~ 19 mm
3730

Speed Wrench
• Metric size from 8 ~ 24 mm
3731

3732

Ringstop Speed Wrench

• Metric size from 8 ~ 24 mm
373A

Double End Speed Wrench

• Metric size from 8 ~ 19 mm
3736

• Metric size from 6 ~ 24 mm

3737

Open-Side Speed Wrench

• Metric size from 8 ~ 19 mm
3721

KT NO. Apply to speed wrench Function

373202H 10 mm 1/4" Bit

Holder

373202R 10 mm 1/4" drive

373203R 13 mm 3/8" drive

373225H 13 mm 5/16" Bit Speed Wrench

373204R 19 mm 1/2" drive

309
 Flexible Speed Wrench
KT No. & D1

3730M
▪ Flexible head, open end and ratchet ring - wrench
▪ 5° gear action (72 teeth)
▪ Chrome vanadium alloy steel
▪ Chrome plated

D2
D1

H1 H2

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
373008M 8 16.2 16.7 4.3 6.5 127.0 40 12 / 432
373009M 9 18.2 18.6 4.6 6.9 131.5 40 12 / 384
373010M 10 20.3 20.0 5.0 7.3 136.0 60 12 / 384
373011M 11 22.5 21.8 5.4 7.7 141.0 60 10 / 320
373012M 12 24.3 23.0 5.8 8.2 147.5 80 10 / 240
373013M 13 26.8 25.2 6.1 8.6 154.0 100 10 / 240
373014M 14 28.7 26.8 6.4 9.0 160.0 100 10 / 200
373015M 15 30.5 28.3 6.9 9.4 169.0 120 10 / 160
373016M 16 32.9 29.8 7.2 9.9 179.0 160 10 / 160
373017M 17 34.5 31.8 7.6 10.3 190.0 180 10 / 160
373018M 18 37.0 32.8 8.0 10.7 203.0 200 10 / 160
373019M 19 39.2 33.9 8.6 11.2 215.0 220 10 / 80

Flexible Speed Wrench Set

13012MR 13013MR
Metal case size (mm) : Metal case size (mm) :
275 x 310 x 65 (1.68 Cuft) 12 303 x 228 x 50 (1.35 Cuft) 13
PC. PC.

Kg 2.17 1/6 Kg 1.66 1/8

KT NO. Contents KT NO. Contents

8, 9, 10, 11, 12, 13, 14, 15, 16, 17,

13012MR 3730M 3730M 8, 10, 12, 13, 14, 16, 17, 18, 19
18, 19
13013MR

373202H 373202R 373203R 373204R

310
Speed Wrench
KT No. & D1

3731M
▪ Open end and ratchet ring -wrench
▪ 5° gear action (72 teeth)
▪ Chrome vanadium alloy steel
▪ Chrome plated
D2
D1

H1 H2
L

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
373108M 8 16.7 17.0 4.0 6.5 140.0 25 12 / 384
373109M 9 18.7 18.6 4.4 6.9 149.0 35 12 / 384
373110M 10 20.8 20.2 4.8 7.3 158.0 40 12 / 240
373111M 11 23.0 22.0 5.2 7.7 165.0 60 12 / 240
373112M 12 24.6 23.4 5.5 8.2 171.0 75 12 / 240
373113M 13 26.8 25.5 5.8 8.6 178.0 80 10 / 160
373114M 14 29.0 26.9 6.2 9.0 190.0 100 10 / 160
373115M 15 31.0 28.3 6.5 9.4 199.0 115 10 / 160
373116M 16 33.0 29.8 6.8 9.9 208.0 135 10 / 160
373117M 17 35.5 31.8 7.2 10.3 225.0 165 6 / 60
373118M 18 37.5 32.7 7.7 10.7 236.0 195 6 / 60
373119M 19 39.4 34.0 8.2 11.2 247.0 225 6 / 60
373121M 21 45.8 40.1 9.0 13.0 287.8 320 6 / 54
373122M 22 45.8 40.1 9.0 13.0 287.8 340 6 / 54
373124M 24 51.8 46.5 10.0 14.5 321.0 475 6 / 54

3732M 3732S
▪ Open end and ratchet ring - wrench
▪ 5° gear action (72 teeth)
▪ Reversible
▪ Take-up:13°
▪ Chrome vanadium alloy steel D2

▪ Chrome plated
D1

H2
13°
H1
L

Size D1 D2 H1 H2 L g Size D1 D2 H1 H2 L g
KT NO. KT NO.
mm mm mm mm mm mm inch mm mm mm mm mm
373208M 8 16.7 16.6 4.6 6.5 140 20 12 / 384 373210S 5/16 16.7 16.6 4.6 6.5 140 20 12 / 384
373209M 9 18.8 18.4 4.9 6.9 150 25 12 / 384 373212S 3/8 20.8 20.0 5.3 7.3 159 40 12 / 240
373210M 10 20.8 20.0 5.3 7.3 159 40 12 / 240 373214S 7/16 23.8 21.8 5.6 7.7 165 60 12 / 240
373211M 11 23.0 21.8 5.6 7.7 165 60 12 / 240 373216S 1/2 27.1 24.7 6.4 8.6 178 95 10 / 160
373212M 12 25.0 22.7 6.0 8.2 172 75 12 / 240 373218S 9/16 29.2 27.0 6.8 9.0 191 110 10 / 160
373213M 13 27.1 24.7 6.4 8.6 178 95 10 / 160 373220S 5/8 33.4 30.0 7.2 9.9 208 160 10 / 60
373214M 14 29.2 27.0 6.8 9.0 191 110 10 / 160 373222S 11/16 35.5 31.8 7.7 10.3 226 175 6 / 60
373215M 15 31.3 28.3 7.0 9.4 200 120 10 / 160 373224S 3/4 39.7 33.8 8.8 11.2 248 220 6 / 60
373216M 16 33.4 30.0 7.2 9.9 208 160 10 / 60 373228S 7/8 46.0 40.0 9.0 13.0 290 320 6 / 54
373217M 17 35.5 31.8 7.7 10.3 226 175 6 / 60 373230S 15/16 52.5 46.0 10.0 14.5 323 465 6 / 54
373218M 18 37.6 32.6 8.2 10.7 237 205 6 / 60
373219M 19 39.7 33.8 8.8 11.2 248 220 6 / 60
373221M 21 46.0 40.0 9.0 13.0 290 320 6 / 54
373222M 22 46.0 40.0 9.0 13.0 290 320 6 / 54
373224M 24 52.2 46.0 10.0 14.5 323 465 6 / 54

311
 Speed Wrench Set

► Pouch material : Tetoron

Kg
KT NO. PC. Contents
12107MRN 7 10, 11, 12, 14, 15, 17, 19 0.91 1 / 24
12107MRN01 7 8, 10, 11, 12, 13, 17, 19 0.84 1 / 24
12114MRN 14 3731M 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 2.50 1 / 12
12112MRN 12 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22, 24 1.95 1/8
12207MRN 7 10, 11, 12, 14, 15, 17, 19 0.91 1 / 24
12207MRN01 7 8, 10, 11, 12, 13, 17, 19 0.91 1 / 24
3732M
12214MRN 14 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 2.50 1 / 12
12212MRN 12 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22, 24 1.95 1/8

12207SRN 7 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 0.91 1 / 24

3732S

Speed Wrench Set

13113MR 13213MR
Metal case size (mm) :
303 x 228 x 50 (1.35 Cuft) 13
PC.

13113MR 13213MR

Kg 1.64 1/8
KT NO. Contents

13113MR 3731M
8, 10, 12, 13, 14, 16, 17, 18, 19
13213MR 373202H 373202R 373203R 373204R
3732M

312
Speed Wrench Set
91162MR 91262MR
Metal case size (mm) : 62
405 x 310 x 80 (1.63 Cuft) PC.

91162MR 91262MR
Kg 3.6 1/4
KT NO. Contents

E4, E5, E6 , H4, H5, H6, H7,

1636H H8, H10, H12
2375M E7, E8 373202R 373203R
91162MR 3731M
M5, M6, M8, M10, M12
1636M
8, 10, 12, E10, E11,
13, 14, 16, T10, T15, T20, T25, T27,
17, 18, 19 3375M E12 T30, T40, T45,T50, T55, 373204R 314810M
1636T
T60
E10, E12,
91262MR 3732M T10H, T15H, T20H, T25H,
E14, E16,
4375M E18, E20 T27H, T30H, T40H, T45H, 414810M
1636U
T50H, T55H, T60H

91168MR 91268MR
Metal case size (mm) :
405 x 310 x 80 (1.63 Cuft) 68
PC.

91168MR 91268MR
Kg 4.8 1/4
KT NO. Contents

H4, H5, H6, H7,

E4, E5, E6 ,
1636H H8, H10, H12
91168MR 2375M E7, E8 373202R 373203R
3731M
8, 9, 10, M5, M6, M8, M10, M12
1636M
11, 12, 13, E10, E11,
14, 15, 16, T10, T15, T20, T25, T27,
3375M E12 T30, T40, T45,T50, T55, 373204R 314810M
17, 18, 19, 1636T
21, 22, 24 T60
91268MR E10, E12,
3732M T10H, T15H, T20H, T25H,
E14, E16,
4375M E18, E20 T27H, T30H, T40H, T45H, 414810M
1636U
T50H, T55H, T60H

313
 Ringstop Speed Wrench KT No. & D1

373AM
▪ Ringstop function
▪ Open end and ratchet ring - wrench
▪ 5° gear action (72 teeth)
▪ Reversible
▪ Take - up: 13°
R ingstop R ingstop
D2
D1

▪ Chrome vanadium alloy steel

▪ Chrome plated H1
H2

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
373A08M 8 16.7 16.6 4.6 6.5 140 20 12 / 384
373A10M 10 20.8 20.0 5.3 7.3 159 40 12 / 240
373A12M 12 25.0 22.7 6.0 8.2 172 75 12 / 240
373A13M 13 27.1 24.7 6.4 8.6 178 95 10 / 160
373A14M 14 29.2 27.0 6.8 9.0 191 110 10 / 160
373A17M 17 35.5 31.8 7.7 10.3 226 175 6 / 60
373A19M 19 39.7 33.8 8.8 11.2 248 220 6 / 60

Double End Speed Wrench KT No. & D1

3736M
▪ 5° gear action (72 teeth)
▪ Chrome vanadium alloy steel D1 D2

▪ Chrome plated
H1 H2
L

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
37360809M 8x9 16.8 20.2 6.5 6.9 128 45 10 / 320
37361011M 10 x 11 20.2 21.8 7.3 7.7 150 65 10 / 200
37361013M 10 x 13 20.2 24.8 7.3 8.6 150 70 10 / 200
37361213M 12 x 13 23.0 24.8 8.2 8.6 170 100 10 / 200
37361415M 14 x 15 26.5 29.5 9.0 9.4 190 120 10 / 160
37361618M 16 x 18 29.5 33.5 9.9 10.7 210 190 10 / 120
37361719M 17 x 19 31.5 33.5 10.3 11.2 230 210 10 / 120

3737M
▪ 5° gear action (72 teeth)
▪ Reversible
▪ Take-up:13° D1 D2

▪ Chrome vanadium alloy steel H2

▪ Chrome plated 13°

H1
13°
L

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
37370607M 6x7 14.2 17.2 6.3 6.5 115 36 10 / 320
37370809M 8x9 16.8 20.2 6.5 6.9 128 45 10 / 320
37371011M 10 x 11 20.2 21.8 7.3 7.7 150 61 10 / 200
37371213M 12 x 13 23.0 24.8 8.2 8.6 170 90 10 / 200
37371415M 14 x 15 26.5 29.5 9.0 9.4 190 130 10 / 160
37371618M 16 x 18 29.5 33.5 9.9 10.7 210 183 10 / 120
37371719M 17 x 19 31.5 33.5 10.3 11.2 230 209 10 / 120
37372123M 21 x 23 40.0 46.0 13 14.5 260 408 8 / 64
37372224M 22 x 24 40.0 46.0 13 14.5 260 397 8 / 64

314
Speed Wrench Set
12706MR
6
PC.

Kg 0.72 1 / 16
KT NO. Contents

8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18,

3737M 17 x 19

► Pouch material : Tetoron

Kg
KT NO. PC. Contents
12709MRN 9 3737M 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18, 17 x 19, 21 x 23, 22 x 24 1.50 1 / 16

Stubby Speed Wrench & Set

3738M 12807MR
▪ Open-ended and ratchet ring-wrench Metal case size (mm) :
▪ 5˚ gear action (72 teeth) 245 x 165 x 52 (1.21 Cuft) 7
▪ Chrome vanadium alloy steel PC.
▪ Chrome plated

D2
D1

H1 H2
L

Size D1 D2 H1 H2 L g
KT NO. mm mm mm mm mm mm
373810M 10 22.0 21.5 4.6 7.6 95 47 15 / 360
Kg 0.92 1 / 10
373811M 11 23.8 23.0 5.1 8.0 103 55 15 / 360 Contents
373812M 12 26.0 24.8 5.3 8.5 106 65 15 / 360
373813M 13 27.5 26.1 5.6 8.7 108 75 15 / 360 10, 12, 13, 14, 15, 17, 19 mm
3738M
373814M 14 30.5 27.6 6.0 9.3 115 88 15 / 360
373815M 15 31.8 29.2 6.3 9.9 119 104 15 / 360
373816M 16 34.0 30.9 6.5 10.0 123 111 10 / 200
373817M 17 36.0 32.3 7.0 10.6 127 143 10 / 200
373819M 19 40.2 35.5 8.0 11.7 139 183 10 / 120

315
 Open-side Speed Wrench & Set KT No. & D1

3721M 3721S
▪ Open-side speed wrench
▪ Torque rating exceeds ANSI specifications by 30% plus
▪ The special ratcheting open end design will not slip
off the screw when torque is applied
▪ Chrome vanadium alloy steel
▪ Chrome plated

D2
D1

H2

Open-side speed wrench Combination wrench 17mm

H1 15°

Size D1 D2 H1 H2 L g Size D1 D2 H1 H2 L g
KT NO. KT NO.
mm mm mm mm mm mm inch mm mm mm mm mm
372108M 8 17.8 13.3 5.0 6.0 136 38 12 / 384 372110S 5/16 17.8 13.3 5.0 6.0 136 38 12 / 384
372110M 10 22.2 16.6 6.0 7.2 161 60 12 / 288 372112S 3/8 22.2 16.6 6.0 7.2 161 59 12 / 288
372111M 11 25.4 17.5 6.6 7.4 168 68 12 / 288 372114S 7/16 25.4 17.5 6.6 7.4 168 68 12 / 288
372112M 12 26.3 19.2 7.5 7.9 174 83 12 / 288 372116S 1/2 28.2 20.3 7.9 8.6 180 97 10 / 240
372113M 13 28.2 20.3 7.9 8.6 180 100 10 / 240 372118S 9/16 31.5 21.3 8.5 9.2 193 120 10 / 120
372114M 14 31.5 21.3 8.5 9.2 193 123 10 / 120 372120S 5/8 34.9 25.6 9.0 10.8 207 163 10 / 120
372115M 15 32.8 23.6 8.5 9.7 200 143 10 / 120 372122S 11/16 37.4 28.1 9.5 10.9 227 184 10 / 100
372116M 16 34.9 23.6 9.0 10.8 207 171 10 / 120 372124S 3/4 41.2 29.3 9.8 12.2 250 246 6 / 60
372117M 17 37.4 28.1 9.5 10.9 227 191 10 / 100
372118M 18 39.0 28.0 9.8 11.2 239 220 10 / 100
372119M 19 41.2 29.3 9.8 12.2 250 250 6 / 60

► Pouch material : Tetoron

Kg
KT NO. PC. Contents
14111MRN 11 3721M 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 1.59 1 / 12

14108SRN 8 3721S 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 1.11 1 / 16

316
Angled Socket Wrench
1080 1081
▪ Angle and through-hole design ▪ Angle and through-hole design
▪ Deep concave at one side and open end socket ▪ Deep concave at one side and open end socket
at the other, easily fit over protruding studs at the other, easily fit over protruding studs
▪ High quality steel, chrome plated ▪ High quality steel, chrome plated
▪ ISO 2236 ▪ ISO 2236

C 6 points C 6 points
H H
P P
B B
L L

12 points 6 points

B P H C L g
B P H C L KT NO.
KT NO. g mm mm mm mm mm mm
mm mm mm mm mm mm
1081-06 6 11.0 7.0 18.5 29 110 55 12 / 240
1080-06 6 11.0 7.0 18.5 29 110 55 12 / 240
1081-07 7 11.5 8.0 21.0 30.5 114 60 12 / 240
1080-07 7 11.5 8.0 21.0 30.5 114 60 12 / 240
1081-08 8 13.0 10.0 21.5 30 120 62 12 / 216
1080-08 8 13.0 10.0 21.5 30 120 62 12 / 216
1081-09 9 14.0 10.0 22.0 33 125 65 12 / 216
1080-09 9 14.0 10.0 22.0 33 125 65 12 / 216
1081-10 10 15.0 11.0 25.5 35 131 100 6 / 60
1080-10 10 15.0 11.0 25.5 35 131 100 6 / 60
1081-11 11 16.5 12.0 26.5 37 137 115 6 / 60
1080-11 11 16.5 12.0 26.5 37 137 115 6 / 60
1081-12 12 17.5 12.0 27.0 40 144 155 6 / 60
1080-12 12 17.5 12.0 27.0 40 144 155 6 / 60
1081-13 13 19.0 14.0 30.0 47 152.5 180 6 / 60
1080-13 13 19.0 14.0 30.0 47 152.5 180 6 / 60
1081-14 14 20.0 14.0 33.0 48 160 185 6 / 60
1080-14 14 20.0 14.0 33.0 48 160 185 6 / 60
1081-15 15 21.5 15.0 35.0 50 174 210 6 / 60
1080-15 15 21.5 15.0 35.0 50 174 210 6 / 60
1081-16 16 22.5 17.0 39.5 54 185 285 6 / 60
1080-16 16 22.5 17.0 39.5 54 185 285 6 / 60
1081-17 17 24.0 18.0 39.5 56 197 315 6 / 60
1080-17 17 24.0 18.0 39.5 56 197 315 6 / 60
1081-18 18 25.0 19.5 42.0 58 211 370 4 / 40
1080-18 18 25.0 19.5 42.0 58 211 370 4 / 40 1081-19 19 26.5 20.5 45.0 62 218 425 4 / 40
1080-19 19 26.5 20.5 45.0 62 218 425 4 / 40
1081-20 20 27.5 21.5 45.0 63 222 445 2 / 20
1080-20 20 27.5 21.5 45.0 63 222 445 2 / 20
1081-21 21 29.0 23.5 49.0 65 231 495 2 / 20
1080-21 21 29.0 23.5 49.0 65 231 495 2 / 20
1081-22 22 30.0 23.5 49.0 67 247 530 2 / 16
1080-22 22 30.0 23.5 49.0 67 247 530 2 / 16
1081-23 23 31.5 24.5 54.0 74 255 610 2 / 16
1080-23 23 31.5 24.5 54.0 74 255 610 2 / 16
1081-24 24 32.5 25.5 56.0 77 266 670 2 / 16
1080-24 24 32.5 25.5 56.0 77 266 670 2 / 16
1081-25 25 34.0 25.5 58.0 79 278 780 2 / 16
1080-25 25 34.0 25.5 58.0 79 278 780 2 / 16
1081-26 26 35.0 25.5 59.0 80 289 805 2 / 16
1080-26 26 35.0 25.5 59.0 80 289 805 2 / 16
1081-27 27 36.5 27.5 59.0 84 299 975 2 / 16
1080-27 27 36.5 27.5 59.0 84 299 975 2 / 16
1081-28 28 37.5 27.5 60.0 86 310 1005 2 / 16
1080-28 28 37.5 27.5 60.0 86 310 1005 2 / 16
1081-29 29 39.0 28.5 62.0 90 319 1060 2 / 16
1080-29 29 39.0 28.5 62.0 90 319 1060 2 / 16
1081-30 30 40.0 28.5 65.0 93 332 1290 2 / 12
1080-30 30 40.0 28.5 65.0 93 332 1290 2 / 12
1081-32 32 42.5 28.5 69.0 95 353 1410 2 / 12
1080-32 32 42.5 28.5 69.0 95 353 1410 2 / 12

317
 Angled Socket Wrench Set
► MRN / SRN : Tetoron pouch bag

► MR / SR : Nylon pouch bag

► Color box

Kg
KT NO. PC. Contents Package

1805MR 5 10, 11, 13, 14, 17 Color box 1.12 1 / 22

1808MR 8 8, 10, 11, 12, 13, 14, 17, 19 Nylon 1.73 1 / 18

1080
1812MR 12 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 22, 24 Nylon 4.75 1/4
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,
1826MR 26 Color box 15.0 1/2
23, 24, 25, 26, 27, 28, 29, 30, 32
1912MR 12 Nylon 4.75 1/4
8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 22, 24
1912MRN 12 1081 Tetoron 4.75 1/4
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,
1926MR 26 Color box 15.0 1/2
23, 24, 25, 26, 27, 28, 29, 30, 32

Angled Socket Wrench

1084 5084
▪ Conic profile and thin walled
▪ Convenient to facilitate the force-depth objects
▪ High quality steel, chrome plated

D1 D2 H1 L1 L g
KT NO. mm mm mm mm mm mm
1084-08 8 12.5 14.0 10 88 230 191 12 / 48
1084-09 9 14.0 15.5 10 88 230 191 12 / 48
1084-10 10 15.0 16.5 10 88 230 191 10 / 40
1084-11 11 16.0 17.5 11 88 230 294 10 / 40
1084-12 12 17.4 19.5 12 98 245 311 6 / 30
1084-13 13 18.9 21.0 12 98 245 395 6 / 30
1084-14 14 19.8 22.0 12 98 260 350 6 / 24
1084-15 15 21.7 24.0 13 98 260 391 6 / 24
1084-16 16 22.2 24.5 13 98 260 388 6 / 24 D1 D2 H1 L1 L g
KT NO.
1084-17 17 24.5 27.0 14 98 260 488 6 / 24 inch mm mm mm mm mm
1084-18 18 25.5 28.0 15 98 260 567 6 / 24 5084-16 1/2 18.9 21.0 23 12 245 320 6 / 30
1084-19 19 27.1 30.0 15 98 260 595 6 / 24 5084-18 9/16 19.8 22.0 23 12 260 336 6 / 24

318
Angled Socket Wrench Set

► Pouch material : Nylon

Kg
KT NO. PC. Contents
1839MR 9 8 ,10 ,11 ,12 ,13 ,14 ,15, 17, 19 3.2 1/6
1084
1842MR 12 8 ,9, 10 ,11 ,12 ,13 ,14 ,15, 16, 17, 18, 19 4.2 1/6

Adjustable Wrench
3611
▪ Chrome vanadium alloy steel
▪ Polish, phosphate & chrome plated
H1

▪ DIN 3117
L

3611P 3611HP

3611R 3611HR

H1 L g H1 L g
KT NO. KT NO.
mm mm mm mm mm mm
3611-06P 20 7 150 125 12 / 108 3611-15HP 43 13 365 1485 1 / 20
3611-08P 25 8 200 226 12 / 48 3611-18HP 52 18 450 1750 1/6
3611-10P 30 11 250 430 10 / 60 3611-24HP 62 23 600 3343 1/6
3611-12P 35 13 300 680 5 / 40 3611-15HR 43 13 365 1485 1 / 20
3611-06R 20 7 150 125 12 / 108 3611-18HR 52 18 450 1750 1/6
3611-08R 25 8 200 226 12 / 48 3611-24HR 62 23 600 3343 1/6
3611-10R 30 11 250 430 10 / 60
3611-12R 35 13 300 680 5 / 40

3631-10R
▪ Magic button to switch ratchet function on/ off
▪ Wider jaw opening, comfortable & durability
▪ Excellent in each movement of knurl, tension
enhanced and precise
▪ Patented, more than 130% of ASME

Overall length g • Material: chrome vanadium alloy steel

KT NO. mm mm
• Finish: chrome plated
3631-10R 32 257 470 6 / 36 • Handle: PP+TPR

319
 Adjustable Hook Spanner Wrench
3641
▪▪The joint is equipped with a spring washer to ensure smooth and reliable operation
▪▪Chrome vanadium alloy steel

3641-35 13-35

Capacity g
KT NO. L
mm
3641-35 13-35 174 96 12 / 144
3641-50 35-50 212 166 12 / 108
3641-80 50-80 285 352 10 / 60
3641-C0 80-120 348 652 5 / 30
3641-I0 120-180 480 1260 4 / 16

Chain Wrench Strap Wrench

3204 3203
▪▪Chain wrench for oil filter ▪▪Strap wrench for oil filter

▪▪Strap for 3203

16mm 3.5mm

530mm
g
320300 46 80
▪▪Strap for 3203A0
3.5mm
16mm

990mm

g
Overall length Capacity(M) g 320301 73 80
KT NO. inch mm mm
3204 8-3/4 225 Ø 60~140 359 50 Overall length Capacity(M) g
KT NO.
inch mm mm
3203 8-3/4 223 Ø 60~140 242 50
3203A0 8-3/4 223 Ø 60~260 300 50

320670
▪▪Aluminum alloy handle and strong nylon strap for tight grip
▪▪Suitable for oil filter or any polished pipe
Serrated makes
grip tightiy
▪▪Nylon strap for 320670
2.0mm
25mm

780mm

g
320600 34.6 50

Overall Length Capacity g

KT NO. inch mm mm
320670 12" 295 Ø 60~180 343.8 50

320
T-Spin Lug Wrench Set
4503MR 4506MR
▪ Fast spinning action extension wrench
▪ Reach deep area with soft grip handle
▪ Suitable for passenger vehicles

L 4 6
1/2"
PC. PC.

4503MR 4506MR

ITEM NO. Size

ℓ L Kg
mm mm

1/2"
4503MR 1.36
19, 21 mm
4335MR
300 265 10
1/2"
4506MR 1.56
17, 19, 21, 23 mm
4335MR

Wheel Nut Wrench

1991
▪ For most car wheel nuts in metric 199104R
(included)
(L)

▪ Chrome vanadium alloy steel

22mm
▪ Chrome plated 19mm
▪ DIN 3119 ISO 6788
L

L g
KT NO.
inch mm mm L

19911722 1/2 17, 19, 21, 22 400 1700 6 21mm 17mm

199104R 1/2 19 34 84 10 / 240

1993
▪ Designed for removing wheel nuts on cars and
heavy vehicles 32mm
24mm

▪ Replaceable bit on wrenches featuring a

square drive
▪ Chrome vanadium alloy steel
L
▪ Chrome plated
L g
KT NO. 3/4"
inch mm mm 27mm

19932427 3/4 24, 27, 32 700 4333 4

199306R
(included)
(L)

30mm 24mm
L g
KT NO. inch mm mm
L

19932433 3/4 24, 27, 30, 33 700 5.02 2

199306R 3/4 30 48 0.21 - L

▪ T-type 90° unirersal

27mm 33mm

joint driver

321
 Assembling Wheel Nut Wrench
1996 • PAT. 192461

▪ For most car wheel nuts in metric 17mm

1/2"
▪ Chrome vanadium alloy steel
▪ Chrome plated
13/16" 19mm

L g
KT NO. inch inch mm mm
19961721 13/16 1/2 17, 19 300 1100 20

Double-End Truck Wrench

1999
▪ Chrome vanadium alloy steel
▪ Chrome plated

Size Overall length g

KT NO. mm mm
19991921 19 x 21 300 1000 1 / 10 199920R
19992224 22 x 24 400 1300 1 / 10
19992427 24 x 27 406 1643 1 / 10
19992432 24 x 32 400 1330 1 / 10
19992730 27 x 30 406 1710 1 / 10
19992732 27 x 32 406 1732 1 / 10
19992733 27 x 33 406 1766 1 / 10
19992833 28 x 33 400 1410 1 / 10
19993032 30 x 32 406 1823 1 / 10
19993233 32 x 33 406 1845 1 / 10
19993238 32 x 38 406 2025 1 / 10
19993821 38 x 21 400 1520 1 / 10
19993822 38 x 22 400 1520 1 / 10
19994121L 41 x 21 450 1800 1 / 10
199920R ø19 400 1030 2 / 20

322
T-type Standard Socket Wrench T-type Deep Socket Wrench
1185M 115HM
▪▪T-shaped stand socket wrench ▪▪Shank material - chrome vanadium alloy steel
▪▪Chrome vanadium alloy steel ▪▪Shank finishing - chrome plated
▪▪DIN 475 ▪▪Grip material - PP

L
SIZE L ℓ L g
KT NO. mm mm mm
115H05M-10 5 260 300 140.0 12 / 72
Size ℓ L g 115H06M-10 6 260 300 147.0 12 / 72
KT NO. mm mm mm
115H07M-10 7 260 300 161.8 12 / 72
118508M 8 200 250 186 10 / 100 115H08M-10 8 260 300 159.0 12 / 72
118509M 9 200 250 231 10 / 100 115H09M-10 9 260 300 161.2 12 / 72
118510M 10 200 250 228 10 / 100 115H10M-10 10 260 300 170.6 12 / 72
118511M 11 200 250 234 10 / 100
115H11M-10 11 260 300 203.4 12 / 72
118512M 12 250 250 386 10 / 60
115H12M-10 12 260 300 205.0 12 / 72
118513M 13 250 300 421 10 / 60
118514M 14 250 300 429 10 / 60 115H13M-10 13 260 300 204.6 12 / 72
118517M 17 300 300 710 6 / 36 115H08M-14 8 350 388 147.0 10 / 60
118519M 19 300 300 725 6 / 36 115H10M-14 10 350 388 153.0 10 / 60
115H13M-14 13 350 390 261.0 8 / 32

5722M
T-type Deep Socket Wrench ▪▪T-type 25° universal standard
socket wrench
1184M
▪▪T-shaped deep socket wrench
▪▪Chrome vanadium alloy steel
▪▪DIN 475

SIZE
L

Size ℓ L g
KT NO. mm mm mm
572210M 10 150 170 400 10 / 60
572212M 12 150 170 400 10 / 60

SIZE L

5742M
Size ℓ L g ▪▪T-type 25° universal standard
KT NO. mm mm mm
socket wrench
118406M 6 120 190 53 10 / 40
118407M 7 120 190 73 10 / 40
118408M 8 200 300 212 10 / 60
118409M 9 200 300 307 10 / 60
118410M 10 200 300 317 10 / 60
118411M 11 200 300 327 10 / 60
118412M 12 200 300 328 10 / 60
118413M 13 200 300 333 10 / 60 SIZE L
118414M 14 200 300 345 10 / 60
118417M 17 250 300 602 6 / 36
Size ℓ L g
KT NO. mm mm mm
574208M 8 200 320 328 10 / 40
574210M 10 200 320 330 10 / 40
574212M 12 200 320 332 10 / 40
574213M 13 200 320 333 10 / 40
574214M 14 200 320 335 10 / 40
574217M 17 200 320 340 10 / 40

323
 T-type Standard Socket Wrench • Chrome vanadium alloy steel
• Chrome plated

5752M 5774M
▪ T-type 25° universal standard ▪ T-type 90° universal standard
socket wrench socket wrench
▪ 2 PC. sliding handle for easy
storage

SIZE L

Size ℓ L g
KT NO. mm mm mm
ℓ
575208M 8 200 450 427 10 / 40 Size
575210M 10 200 450 430 10 / 40 L

575212M 12 200 450 432 10 / 40

575213M 13 200 450 433 10 / 40 Size ℓ L g
KT NO.
575214M 14 200 450 435 10 / 40 mm mm mm
575217M 17 200 450 440 10 / 40 577406M 6 200 390 420 10 / 30
577407M 7 200 390 420 10 / 30
5762M 577408M 8 200 390 420 10 / 30
▪ T-type 25° universal standard 577409M 9 200 390 420 10 / 30
577410M 10 200 500 480 10 / 30
socket wrench
577411M 11 200 500 480 10 / 30
577412M 12 200 500 480 10 / 30
577413M 13 200 500 480 10 / 30
577414M 14 200 500 500 10 / 30
577415M 15 200 500 500 10 / 30
577416M 16 200 500 500 10 / 30
SIZE L 577417M 17 200 500 500 10 / 30
577418M 18 200 500 500 10 / 30
Size ℓ L g
577419M 19 200 500 500 10 / 30
KT NO. mm mm mm
576208M 8 200 600 519 10 / 40
576210M 10 200 600 520 10 / 40
576212M 12 200 600 522 10 / 40
576213M 13 200 600 523 10 / 40
576214M 14 200 600 525 10 / 40
576217M 17 200 600 540 10 / 40

5772M
▪ T-type 90° universal standard
socket wrench

SIZE
L

Size ℓ L g
KT NO. mm mm mm
577208M 8 200 400 425 10 / 40
577210M 10 200 400 425 10 / 40
577212M 12 200 400 425 10 / 40
577213M 13 200 450 425 10 / 40
577214M 14 200 450 425 10 / 40
577217M 17 200 450 425 10 / 40

324
T-type Spark Plug Socket T-shaped Driver
1563 3795 3/8"
▪ T-type 25° universal spark plug ▪ T-type 90° universal joint driver
socket (RUBBER) ▪ Chrome vanadium alloy steel
▪ Chrome vanadium alloy steel

L
SIZE
L

Size ℓ L
ℓ L g
KT NO. g KT NO.
mm mm mm mm mm

15631612 16 200 300 363 10 / 40 3795-15 200 375 375 10 / 40

15631615 16 200 385 400 10 / 40 3795-18 200 455 425 10 / 40
15631618 16 200 460 450 10 / 40 3795-24 200 600 500 10 / 40
15631818 18 200 460 450 10 / 40 3795-30 200 750 600 10 / 30
15632112 21 200 300 388 10 / 40
15632115 21 200 385 438 10 / 40
15632118 21 200 460 488 10 / 40
4795 1/2"
1566 ▪ T-type 90° universal joint driver
▪ Chrome vanadium alloy steel
▪ T-type 25° universal spark plug socket
with magnet
▪ Chrome vanadium alloy steel
Magnet
L

ℓ L g
KT NO.
mm mm
4795-18 200 460 567 10 / 30
SIZE
L 4795-24 200 600 700 10 / 30
4795-30 200 750 850 10 / 20
Size ℓ L g 4795-36 200 900 1000 10 / 20
KT NO. mm mm mm
15661612 16 200 300 400 10 / 40
15661615 16 200 385 420 10 / 40
15661618 16 200 460 460 10 / 40 4511 1/2"
15661818 18 200 460 450 10 / 40
15662112 21 200 300 420 10 / 40
▪ Chrome vanadium alloy steel
15662115 21 200 385 460 10 / 40
15662118 21 200 460 510 10 / 40

T-shaped Driver
3511 3/8" L

▪ Chrome vanadium alloy steel ℓ L g

KT NO.
mm mm
4511-06 170 268 400 5 / 30
4511-10 250 268 468 6 / 30

ℓ L g
KT NO.
mm mm
3511-06 170 268 325 5 / 30
3511-10 250 268 386 6 / 30

325
 T-shaped Driver Stepped Ratchet
• Chrome vanadium alloy steel
• Chrome plated Radiator key Set
21A107 7HA03
▪ Applied with power bit
▪ Suitable for installation and removal of most
radiator valves and tank connectors
▪ Key has fittings from small to large, stepped
along the length of the key, for different internal
hexagon and internal lug valve sizes
▪ 1/2”DR. ratchet makes installations quickly and
easily
▪ 4724-11G can be used as general ratchet
ℓ ▪ 4724-11G 11° gear action degree (32 teeth), DIN 3122
Size L

Size ℓ L g
KT NO. inch mm mm
21A107 1/4 150 175 194 10 / 60

T-type Wrench Hanger 21mm (1")

16.4mm (3/4")
12.3mm (1/2")

9TE21 11.6mm
9.6mm (3/8")

Hexagon A/F
▪ Easily collect and organize different sizes of T-type
wrenches at the same time
▪ The front square board is foldable to save space
▪ Suitable for trolleys, worktable & the other
necessary working places
▪ There are 3 square neodymium magnets behind
panel, maximum 5 kgs can be loaded (The
magnetic side should be totally attached)
Magnet

L Capacity g
KT NO. mm kg lbs
9TE21 120 5 11 533 1 / 45
Kg
Contents 0.74 1 / 24

4724-11G

7HA11 3/8", 1/2", 3/4", 1"

4724-01

326
327
 PLIERS
▪ Pliers

▪ Circlip Pliers

▪ Insulated Pliers

▪ Grip Pliers

▪ Wire Twisting Pliers

High performance
for cutting
A greater hardness at the edge makes it very
sharp and easy to cut. Wear-resistant design
is for different purposes pliers and cutters.
Our high leverage combination pliers quality
is tested by cutting piano wire with sharp
performance.

Over 2000 times cutting result for 1.6mm

piano wire (2200N/mm2, HRC48)

0 .3 3 m m
0 .1 9 m m

K in g T o n y B r a n d : O th e r B ra n d :
W o re d o w n 0 .1 9 m m W o re d o w n 0 .3 3 m m
(g o o d ) (n o t g o o d )

E xce e d o th e r b ra n d s 356%
7856
2202
K IN G T O N Y O th e rs

K IN G T O N Y c o m b in a tio n p lie r s a r e s h a r p a n d tr ip le o f its

life fo r c u ttin g th a n o th e r s .

328
329
 CUTTING EDGES TECHNICAL BASICS
CUTTING EDGE SHAPES

With bevel With very small bevel

(outside bevel) (outside bevel)

With small bevel Without bevel

(outside bevel) (outside bevel)

WIRE CLASSES

Soft wire Hard wire

Copper / Aluminium Spring wire / Steel nail

Medium hard wire Piano wire

Steel nail Hardend spring steel

TECHNICAL BASICS

Thin Coarse With opening

serrated serrated spring

JAWS TYPES

Round jaws Half-round jaws Flat & point jaws

330
Combination Pliers
• Grip material - PP + TPR / item no. with "C" is made of PVC

6111
▪ European type
▪ Polished head
▪ DIN ISO 5746

6111 6111C

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6111-06 6-1/2 163 4.0 2.8 1.8 1.6 217 8 / 96

6111-07 7-1/2 188 4.0 3.0 2.0 1.6 292 8 / 48
6111-08 8-1/4 213 4.0 3.0 2.0 1.6 399 8 / 48
6111-07C 7-1/2 188 4.0 3.0 2.0 1.6 260 8 / 48
6111-08C 8-1/4 213 4.0 3.0 2.0 1.6 340 8 / 48

6112
▪ Hi-leverage type
▪ Polished head

6112 6112C

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6112-09 9 225 4.0 3.0 2.2 2.0 348 6 / 60

6112-09C 9 225 4.0 3.0 2.2 2.0 359 6 / 60

6114
6112
▪ Mini type
▪ DIN ISO 5746

L Cutting capacities
KT NO. g
inch mm ø mm ø mm

6114-05 5 122 3.0 2.0 85 8 / 160

331
 Diagonal Cutting Nippers
• Grip material - PP + TPR
• Polished heads

6211
▪ European type
▪ DIN 5749

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6211-06 6-1/2 163 4.0 2.8 2.0 1.6 194 8 / 96

Diagonal Cutting Nippers

• Grip material - PP + TPR
• Polished heads

6213
▪ Japanese type

L Cutting capacities Wire stripper

KT NO. g
inch mm ø mm mm
6213-06 6-1/2 163 1.25 1.4 / 1.6 179 8 / 96

6214
6112
▪ Mini type

L Ø Max. mm
KT NO. g
inch mm ø mm

6214-45 4-1/2 115 0.6 84 8 / 160

6214-05 5 127 1.25 94 8 / 160

6231
▪ Heavy duty type
▪ DIN ISO 5749

6231-07 6231-08

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6231-07 7-1/2 188 4.0 3.0 2.2 2.0 240 8 / 80

6231-08 8 200 5.0 3.5 2.2 2.0 312 8 / 80

332
Plastic Pliers ▪ In order to get normal life of pliers,
do not cut steel wire.
• Grip material - PP + TPR / item no. with "C" is made of PVC

6921
6112
▪ European type
▪ Polished head

6921 6921C
L
L
KT NO. g
inch mm
6921-05 5 132 98 6 / 120
6921-06 6 155 238 6 / 72
6921-07 7 178 276 6 / 60
6921-05C 5 132 89 6 / 120
6921-06C 6 155 132 8 / 96
6921-07C 7 178 170 6 / 60

Long Nose Pliers

• Grip material - PP + TPR

6112
6311
▪ European type
▪ DIN ISO 5745

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6311-06 6-1/2 164 4.0 2.8 1.8 1.6 147 10 / 120

6311-08 8 200 4.0 3.0 2.0 1.6 219 8 / 80

6112
6313
▪ Japanese type
▪ DIN ISO 5745

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6313-06 6-1/2 169 4.0 2.8 1.8 1.6 145 10 / 120

6112
6314
▪ Mini type
▪ DIN ISO 5745

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm

6314-05 5-1/2 140 3.0 2.0 1.6 100 8 / 160

333
 Extra Long Nose Pliers
• Grip material - PVC

6319-11C
▪ Slim jaws design for gripping components in recessed areas

L
L
KT NO. g
inch mm
6319-11C 11 280 317 6 / 48

Double Joint Nose Pliers

• Grip material - PVC

6329-13C
▪ Double joint and slim profile, for working a greater width in a narrow space, even single-handed
▪ Serrated nose for good grip

A B

L A B
KT NO. Up on jaw capacity Grip width g
inch mm (mm) (mm)

6329-13C 13 340 50 110 365 5 / 40

6339-13C
▪ Double joint and slim profile, for working a greater width in a narrow space, even single-handed
▪ Serrated nose for good grip

A B

L A B
KT NO. Up on jaw capacity Grip width g
inch mm (mm) (mm)

6339-13C 13 335 50 110 365 5 / 40

334
Bent Nose Pliers
• Grip material - PP + TPR

6331
▪ European type
▪ DIN ISO 5745

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6331-06 6-1/2 163 4.0 2.8 1.8 1.6 149 10 / 120

6331-08 8 200 4.0 3.0 2.0 1.6 220 8 / 80

6334
6112
▪ Mini type
▪ DIN ISO 5745

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm

6334-05 5 127 3.0 2.0 1.6 102 8 / 160

End Cutting Pliers

• Grip material - PP + TPR / item no. with "C" is made of PVC

6411
▪ European type
▪ DIN ISO 5748

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6411-06 6-1/2 163 4.0 3.0 1.6 1.6 268 8 / 96

6431
▪ European type
▪ DIN ISO 9242

L Cutting capacities
KT NO. g
inch mm ø mm ø mm

6431-10C 10 254 2.0 1.6 445 6 / 48

6431-11C 11 278 2.2 1.8 510 6 / 48

335
 Stripping Pliers
• Grip material - PP + TPR

6711
6112
▪ With spring and adjusting screw

L Wire stripper
KT NO. ø mm g
inch mm mm2
6711-06 6 155 5 10 191 8 / 96

Slip Joint Pliers

• Grip material - PVC

6463
6112
▪ 2 positions adjustment
▪ Serrate jaws

L
L
KT NO. g
inch mm
6463-08C 8 210 290 8 / 80

Groove Joint Pliers

• Grip material - PP + TPR / item no. with "C" is made of PVC

6511
6112
▪ 7 positions opening
▪ DIN ISO 8976

6511-10 6511C

L A B
KT NO. g
inch mm mm mm mm
6511-10 10 253 50 33 50 447 6 / 48
6511-10C 10 253 50 33 50 400 6 / 48
6511-13C 13 325 65 43 50 808 2 / 16
6511-17C 17 425 100 58 55 1150 2 / 12

6516
6112
▪ German type
▪ 7 positions opening
▪ DIN ISO 8976

6516-10 6516C

L
L A B
KT NO. g
inch mm mm mm mm
6516-10 10 253 36 58 61 386 6 / 48
6516-10C 10 253 36 58 61 300 8 / 64

336
Groove Joint Pliers
• Grip material - PVC

6517
6112
▪ Quick lock
▪ Grip material-PVC PUSH
▪ DIN ISO 8976
A

B
L

L A B
KT NO. g
inch mm mm mm mm
6517-08C 8 200 40 54 44 190 10 / 40
6517-10C 10 250 60 68 56 360 6 / 48
6517-12C 12 310 70 89 73 540 5 / 40

Bolt Cutter
6131 GS / TUV

▪ Chrome vanadium alloy steel

▪ Center cut

L Cutting capacity Cutting capacity kg

KT NO. inch mm HRC 15"(ø mm) HRC 35"(ø mm)
6131-12 12 300 ø5 ø4 0.76 1 / 20
6131-14 14 350 ø7 ø5 1.00 1 / 20
6131-18 18 450 ø8 ø6 1.51 1 / 12
6131-24 24 600 ø10 ø8 2.35 1 / 10
6131-30 30 750 ø13 ø10 3.75 1/6
6131-36 36 900 ø16 ø11 5.50 1/5
6131-42 42 1050 ø18 ø13 8.56 1/3

6131P01
▪ Spare blade for 6131
▪ Center cut

Overall length Cutting capacity Cutting capacity

KT NO. kg
mm HRC 15"(ø mm) HRC 35"(ø mm)
6131-12P01 95 x 57 ø5 ø4 0.26 1 / 40
6131-14P01 110 x 65 ø7 ø5 0.40 1 / 40
6131-18P01 125 x 72 ø8 ø6 0.85 1 / 20
6131-24P01 150 x 86 ø10 ø8 0.87 1 / 20
6131-30P01 170 x 97 ø13 ø10 1.25 1 / 10
6131-36P01 190 x 112 ø16 ø11 1.85 1 / 10
6131-42P01 205 x 122 ø18 ø13 3.10 1/5

337
 Compact Bolt Cutter
6133
▪ Heavy duty type
▪ DIN ISO 5749
▪ Center cut

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6133-08 8 200 6.0 5.0 4.0 3.5 399.6 8 / 48

Circlip Pliers
▪ Design of hidden spring
▪ High strength of tip
▪ Straight and angled pattern
▪ DIN 5254 & DIN 5256
Internal type External type

66HS 66HB 66SS 66SB

66HS 66HB 66SS 66SB

Overall length Capacity g
KT NO. Tips Ø-tips
inch mm Ø mm

66HS-07 7 188 1.8 19~60 176 8 / 48

66HB-07 7 175 1.8 19~60 176 8 / 48

66SS-07 7 188 1.8 19~60 195 8 / 48

66SB-07 7 175 1.8 19~60 195 8 / 48

338
Circlip Pliers
▪ For internal retaining rings Japanese type European type
▪ Straight and angled pattern
▪ DIN 5254 & DIN 5256

Internal type

67HS 67HB 68HS 68HB

67HS 67HB 68HS 68HB

Overall length Capacity g
KT NO. Tips Ø-tips
inch mm Ø mm

67HS-07 7 180 1.8 19~60 130 12 / 144

67HB-07 7 180 1.8 19~60 130 12 / 144

68HS-05 5 125 1.3 12~28 97 10 / 80

68HS-07 7 180 1.8 19~60 130 12 / 144
68HS-10 10 250 2.3 40~100 291 8 / 64
68HB-05 5 125 1.3 12~28 94 10 / 80
68HB-07 6-3/4 170 1.8 19~60 130 12 / 144
68HB-10 9-1/2 241 2.3 40~100 291 6 / 48

▪ For external retaining rings Japanese type European type

▪ Straight and angled pattern
▪ DIN 5254 & DIN 5256

External type

67SS 67SB 68SS 68SB

67SS 67SB 68SS 68SB

Overall length Capacity g
KT NO. Tips Ø-tips
inch mm Ø mm

67SS-07 7 180 1.8 19~60 130 12 / 144

67SB-07 7 180 1.8 19~60 130 12 / 144

68SS-05 5 125 1.3 12~28 101 10 / 80

68SS-07 7 180 1.8 19~60 130 12 / 144
68SS-10 10 250 2.3 40~100 291 8 / 64
68SB-05 5 125 1.3 12~28 101 10 / 80
68SB-07 6-3/4 170 1.8 19~60 130 12 / 144
68SB-10 9-1/2 241 2.3 40~100 291 6 / 48

339
 Pliers Set • Pouch material : Nylon

42104GP 4 4
Kg PC. PC.
Contents 1.17 1 / 18

6111-06 6211-06 6311-08 6511-10

42104GP01
Kg 1.17 1 / 18
Contents

42104GP 42104GP01
6111-06 6211-06 6311-08 6516-10C

42124GP 4 4
PC. PC.
Kg 1.48 1 / 18
Contents

6111-08 6311-08 6231-08 6511-10C

42124GP01
Kg 1.48 1 / 18
Contents
42124GP 42124GP01

6111-08 6311-08 6231-08 6516-10C

4 4
Circlip Pliers Set
PC. PC.

42114GP
Kg 0.62 1 / 32
Contents

68HS-07 68SS-07 68HB-07 68SB-07

42114GP 42154GP
42154GP
Kg 0.84 1 / 32
Contents

6
PC.
66HS-07 66SB-07 66HB-07 66SS-07

42116GP
Kg 1.33 1 / 18
Contents

68HS-07 68HB-07 68HS-10 68SS-07 68SB-07 68SS-10 42116GP

Display Stand for PVC Pliers

87116
▪ Capacity: 12 PC.
▪ Size: 243 x 205 x 200 mm
▪ Suitable for displaying PVC grip pliers

340
 • Grip material-TPR
• Polished head

Combination Pliers • Chrome vanadium steel

• IEC DIN EN 60900 1000V

6116

L
L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6116-07A 7-1/2 185 4.0 3.0 2.0 1.6 290 10 / 60

6116-08A 8 200 4.0 3.0 2.0 1.6 386 10 / 60

Cable Cutting Pliers

6146
6112

L
L
KT NO. ø mm g
inch mm
6146-08A 8-1/4 214 14 360 10 / 60

Diagonal Cutting Pliers

6216

L
L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6216-06A 6-1/2 167 4.0 2.8 2.0 1.6 230 10 / 60

Heavy Duty Diagonal Cutting Pliers

6236

L
L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6236-07A 7-1/2 190 5.0 3.5 2.4 2.0 280 10 / 60

Long Nose Pliers

6318
6112

L
L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6318-08A 8-1/4 210 4.0 2.8 2.0 1.6 230 10 / 60

341
 • Grip material-TPR

Bent Nose Pliers

• Polished head 1000V

• Chrome vanadium steel

• IEC DIN EN 60900

6336
6112

L Cutting capacities
KT NO. g
inch mm ø mm ø mm ø mm ø mm

6336-08A 8 200 4.0 3.0 2.0 1.6 250 10 / 60

Groove Joint Pliers

• Box joint

6516
6112
A
B

L
A B L
KT NO. g
mm mm inch mm mm
6516-10A 55 63 10 250 36 420 10 / 50

Stripping Pliers
• With spring

6716
6112

L Wire stripper
KT NO. ø mm g
inch mm mm2
6716-06A 6-1/4 160 5 10 205 10 / 60

Insulated Pliers Set

40603GP
Kg 0.89 1 / 20
Contents 3
PC.

6116-07A 6318-08A 6216-06A

342
Lock Grip Pliers • Finishing - option 1 : chrome plated (R)
option 2 : nickel plated (N)

6011
▪ Curved jaw with wire cutter
▪ With adjusting screw and release lever
▪ Jaw width 10mm, length 30mm
▪ ASME B107.500-2010
MATERIAL - Jaw : Spring alloy steel
Handle : Chrome molybdenum alloy steel 6011R

Overall length Jaw capacity g

KT NO. inch mm mm
6011-05R 5-1/2 140 29 166 6 / 48 6011N
6011-07R 7 185 38 367 8 / 32
6011-07N 7 185 38 367 8 / 32
6011-10R 10 254 48 542 8 / 32
6011-10N 10 254 48 542 8 / 32

6012
▪ V jaw with wire cutter
▪ With adjusting screw and release lever
▪ Jaw width 10mm, length 30mm
▪ ASME B107.500-2010
MATERIAL - Jaw : Chrome molybdenum alloy steel
Handle : Chrome molybdenum alloy steel

Overall length Jaw capacity g

KT NO. inch mm mm
6012-07N 7 175 33 385 8 / 32
6012-10N 10 254 45 581 8 / 32

6031
▪ Straight jaw
▪ With adjusting screw and release lever
▪ Jaw width 10mm, length 30mm
▪ ASME B107.500-2010
MATERIAL - Jaw : Spring alloy steel 6031R
Handle : Chrome molybdenum alloy steel

6031N
Overall length Jaw capacity g
KT NO. inch mm mm
6031-07R 7 185 33 392 8 / 32
6031-07N 7 185 33 392 8 / 32
6031-10R 10 254 45 573 8 / 32
6031-10N 10 254 45 573 8 / 32

343
 Miniature Long Nose Pliers
6315
▪▪ASME B107.500-2010
MATERIAL - Jaw : Spring alloy steel
Handle: Chrome molybdenum alloy steel

Overall length Jaw capacity g

KT NO. inch mm mm
6315-06 6 165 51 205 8 / 80
6315-09 9 221 70 393 6 / 36

Lock Sheet Metal Clamp

6605
▪▪With adjusting screw and release lever
▪▪Makes bending, forming, and crimping
sheet metal easier
MATERIAL - Chrome molybdenum alloy steel

Overall length Jaw capacity g

KT NO. inch mm mm
6605-08 8 206 13 455 1 / 18

Locking Chain Clamp

6655
▪▪Chain can hold around any shape or size
▪▪Convenient for awkward shaped pieces
▪▪With adjusting screw and release lever
MATERIAL - Handle: Chrome molybdenum alloy steel

Overall length Capacity g

KT NO. inch mm mm
6655-09 9 225 Ø 60~140 733 1 / 18

Locking Welding Clamp

6665
▪▪U-shaped jaws allow enhanced visibility and more
working space
▪▪Holds work in proper alignment
▪▪For use in welding or holding awkward shapes in place
MATERIAL - Chrome molybdenum alloy steel

Overall length Capacity g

KT NO. inch mm mm
6665-09 9 230 43 625 1 / 18

344
C-clamp Grip Pliers
6615
MATERIAL -
Jaw : Chrome vanadium alloy steel
Handle: Chrome molybdenum alloy steel
6615-06 6615-11 6615-18

Overall length Capacity g

KT NO. inch mm mm
6615-06 6-3/4 170 50 230 6 / 72
6615-11 11 280 100 790 1 / 20
6615-18 18 456 200 1136 1 / 10

6625
▪ C-clamp grip pliers with moving jaw
MATERIAL -
Jaw : Chrome vanadium alloy steel
Handle: Chrome molybdenum alloy steel
6625-06 6625-11 6625-18

Overall length Capacity g

KT NO. inch mm mm
6625-06 7 175 54 250 6 / 72
6625-11 11 280 96 840 1 / 20
6625-18 18-1/2 457 200 1220 1 / 10

Wire Twisting Pliers

6121 6122
▪ Simple pull action twisting wires into a tight
uniform fastener
▪ Material: Chrome vanadium alloy steel
▪ Twist wire up to 0.04 inch
6121
Reversible

6122
• Grip wire and pull • Pull the lock • Pull the knob
down the bar
R
L

• Left turn (counterclockwise):

(Only 6122) Reversible if mistake happened switch button to
"L" then pull the bar to twist counterclockwise

KT NO. Type g

6121-06X wire twisting pliers 6" 250 12 / 48

6121-09X wire twisting pliers 9" 380 10 / 50
6122-06X reversible wire twisting pliers 6" 337 10 / 40
6122-09X reversible wire twisting pliers 9" 450 10 / 30

345
 PIPE TOOLS
▪ Pipe / Tube Cutting

▪ Pipe Wrench

▪ Flaring / Swaging

▪ Bending

▪ Stepped Ratchet Radiator

key Set

▪ A/C & Refrigeration Service Tools

& Set

346
347
 Ratchet Tubing Cutter
• Cuts without having to rotate tool completely around tubing
• Ratchet mechanism allows for tight area operation
• Cuts through some of the toughest surfaces: stainless steel, wall conduit, copper and aluminum
• Exclusive one hand operation, limited risks of hand-fatigue and injuries

7912-21 7912-22
360° 360°

Tighten Tighten

7912-21 7912-22

Loosen Nylon + fiber Loosen

▫ Comes with spare blade. Zinc alloy steel
▫ Provided with foldable reamer. TPE

●● Use standard hex ●● Deploy foldable

key to remove back- reamer provided
up blade located in to smoothen
the handle base. sharp edges.
(only 7912-22)

360° 360°

1. Place tube securely 2. Rotate clock-wise to 3. Pull knob out, down & 4. Repeat "Up & Down" 5. Tighten tool around the
between cutter jaws. tighten jaw grip. release in a single action action until open face up. tube when needed.
to start cutting procedure. Repeat each actions until
tube is cut.

Capacity Max. cutting thickness (mm) g

KT NO. Remark
ø mm Stainiess Other
7912-21 8-28 2 3.0 spare blade 389 1 / 40
7912-22 12-35 2 3.0 spare blade / reamer 452 1 / 40

7912-23
▫ Comes with spare blade. 360°

▫ Apply to cut car's exhaust pipe.

●● Use standard hex key

to remove back-up
blade located in the Tighten
handle base.

Loosen

Apply to cut car’s 28

exhaust pipe.

360° 360°

1. Place tube securely 2. Rotate clock-wise to 3. Pull knob out, down & 4. Repeat "Up & Down" 5. Tighten tool around the
between cutter jaws. tighten jaw grip. release in a single action action until open face up. tube when needed.
to start cutting procedure. Repeat each actions until
tube is cut.

Capacity Max. cutting thickness (mm) g

KT NO. Remark
ø mm Stainiess Other
7912-23 28-67 2 3.0 spare blade 1122.6 1 / 10

348
Mini Tube Cutter

7915A-19
▪ For copper, brass, aluminum pipes
▪ Specifically design for using in restricted place
▪ With two guide rollers
▪ Full-stop feed system prevents wheels and rollers
from coming into contact
50 mm
▪ Ergonomic handle design for comfortable
operation
▪ Quick adjustment and easy to change the
cutting wheel

• Cutting wheel
4.9mm
5mm

19.8mm

g
7914A-0111 13 25 / 250

Overall length g
KT NO. inch mm max. (mm) inch mm
7915A-19 1/8~3/4 3~19 1.2 2-1/2 62 152 10 / 100

7915A-28

• Cutting wheel
4.9mm

57.2 mm
5mm

19.8mm

g
7914A-0111 13 25 / 250

Overall length g
KT NO. inch mm max. (mm) inch mm
7915A-28 1/8~1-1/8 3~28 1.2 2-3/4 70 205 10 / 100

349
 Tube Cutter for Copper
7914A-35
▪ For copper, brass, aluminum pipes
▪ Ergonomic handle design for comfortable
operation
▪ Includes one piece spare cutting wheel
▪ With four guide rollers
▪ Full-stop feed system prevents wheels and rollers
from coming into contact
▪ Quick adjustment and easy to change the
cutting wheel

• Cutting wheel
4.9mm
5mm

19.8mm

g
7914A-0111 13 25 / 250

Overall length g
KT NO. inch mm max. (mm) inch mm
7914A-35 1/8~1-3/8 3~35 1.2 5-1/2 140 370 10 / 60

7914B-45
▪ For copper, brass, aluminum pipes
▪ Ergonomic handle design for comfortable operation
▪ Includes one piece spare cutting wheel &
retractable deburring tool
▪ With four guide rollers
▪ Full-stop feed system prevents wheels and rollers
from coming into contact
▪ Quick adjustment and easy to change the cutting
wheel

• Cutting wheel
4.9mm
5mm

19.8mm

g
7914A-0111 13 25 / 250

• Replacement blade for deburring

g
7914B-4521 3 1 / 500

Overall length g
KT NO. inch mm max. (mm) inch mm
7914B-45 1/8~1-3/4 3~45 1.2 6-3/4 172 568 6 / 36

350
Tube Cutter for Copper
7914C-70
▪ For copper, brass, aluminum pipes
▪ Ergonomic handle design for comfortable
operation
▪ Includes one piece spare cutting wheel &
retractable deburring tool
▪ With four guide rollers
▪ Full-stop feed system prevents wheels and rollers
from coming into contact
▪ Quick adjustment and easy to change the
cutting wheel

• Cutting wheel
4.9mm
5mm

19.8mm • The ratchet telescopic guide with

automatic spring-driven release
g
for adjust quickly.
7914A-0111 13 25 / 250

• Replacement blade for deburring

• For steel metal pipes and profiles

88mm

g
7914C-7021 17 1 / 300

Overall length g
KT NO. inch mm max. (mm) inch mm
7914C-70 1/4~2-3/4 6~70 1.2 8-3/4 222 802 4 / 24

7915-30

• Cutting wheel
11mm
3mm

18mm

g
7915-3011 10 25 / 250

Overall length g
KT NO. inch mm max. (mm) inch mm
7915-30 1/8~1-1/8 3~30 1.2 5-1/2 140 231 1 / 20

351
 Tube Cutter for Copper
7916M
▪ For copper pipes
▪ Easy to use in restricted space
▪ Self-alignment for adjustment

• Cutting wheel (For 12M, 15M, 21M, 22M)

10.3mm

15.7mm 4.7mm

7916-0111 g
11 25 / 250

• Ideal for hard to reach places

Overall length g
KT NO. mm max. (mm) mm
7916-12M 12 1.2 52 176 10 / 100
7916-15M 15 1.2 56 207 10 / 100
7916-21M 21 1.2 68 248 10 / 60
7916-22M 22 1.2 68 248 10 / 60

Tube Cutter for Steel

7918
▪ For steel pipes
▪ Strong cast housing
▪ Extra-long shank
provides for quick &
easy adjustment
▪ Possible for large pipe 7918-50
sizes
▪ Perfectly balanced

7918-A0

• Cutting wheel (For 7918-50) • Cutting wheel (For 7918-A0)

17mm 22mm
19mm

19mm

31.9mm 40mm

7918-5011 g
39 1 / 200 7918-A011 g
66 1 / 200

Overall length g
KT NO. inch mm max. (mm) mm
7918-50 1/8~2 10~60 3 450 2215 1/8
7918-A0 1-1/4~4 43~114 3 900 5020 1/4

352
Tube Cutter for Soft Plastic Pipe
7913B-35
▪ For PVC, PP, PE, PEX, PB
▪ For soft plastic pipe
▪ Aluminum body
▪ One-hand operation
▪ Burr-free cutting
▪ Reversible blade

• Tube cutter for soft plastic pipe wheel

• Capacity Ø3~35

g
7913B-3511 36 1 / 100

Overall length g
KT NO. inch mm inch mm
7913B-35 1/8~1-3/8 3~35 8-1/4 211 215 20 / 60

Ratchet Tubing Cutter

7913
▪ For PVC, PP, PE, PEX, PB pipes
▪ Ratchet design for quick cutting

• For 7913-42

g
7913-4211 60 10 / 200

Overall length
KT NO. g
inch mm inch mm
7913-42 1/2~1-5/8 6~42 8 201 360 10 / 50

353
 2-in-1 Ratchet Tubing Cutter
7913A-63
▪ Easy one-hand operation
▪ Cut into thick pipe and thin pipe
▪ Easily apply for max. 63 O.D.
▪ Comfortable TPR handle
▪ For unitary material tube: PE, PP, PVDF,
PB, PVC or similar tube
▪ Advanced tool steel blade and
aluminum body

• 2-in-1 ratchet tubing cutting

wheel
• Capacity Ø6~63

7913A-6311

g
190 1 / 100

Overall length
KT NO. g
inch mm inch mm
7913A-63 1/4~2-1/2 6~63 11-1/2 293 802 6 / 24

354
"S" Pipe Wrench
6521
▪ For nuts, bolts, flat material
▪ A non-detachable adjusting nut with round thread ensures a wide adjustment
▪ For working in confined space

"S" Pipe wrench A

A Size Overall length g

KT NO. mm inch inch mm
6521-09 13 1/2 9-1/4 235 415 1 / 20
6521-13 25 1 13 330 791 1 / 20
6521-16 38 1-1/2 16-1/2 420 1450 1 / 12
6521-21 51 2 21 535 2404 1/6
6521-26 76 3 25-5/8 652 5030 1/2

Pipe Wrench
6531
▪ Professional stillson type
▪ High quality steel

A Overall length g
KT NO. inch mm inch mm
6531-10 1-3/16 34 10 231 600 1 / 24
6531-12 1-9/16 42 12 271 780 1 / 24
6531-14 1-7/8 48 14 315 1050 1 / 12
6531-18 2-3/8 60 18 407 1720 1 / 12
6531-24 2-15/16 75 24 539 3150 1/6
6531-36 4 102 36 825 6280 1/2
6531-48 5-1/2 140 48 1034 9750 1/2

355
 Pipe Wrenches
6532
▪ Extra heavy type
▪ Forged parts tempered
▪ Teeth offset against direction of rotation and induction-hardened

A Overall length g
KT NO. mm inch mm
6532-08 25 8 185 380 1 / 40
6532-10 30 10 245 700 1 / 20
6532-12 40 12 275 1050 1 / 20
6532-14 50 14 315 1340 1 / 12
6532-18 60 18 400 1960 1 / 12
6532-24 75 24 525 3640 1/ 6
6532-36 90 36 720 6300 1/2
6532-48 110 48 1030 9100 1/2

"Aluminum" Offset Pipe Wrench 90°

6541L
▪ Suitable for walls and floors, ceilings and other places beside the pipe work

90˚
A

A Overall length g
KT NO. mm inch mm
6541-14L 60 14 356 856 1 / 20
6541-18L 76 18 457 1486 1 / 10

356
45° Flaring Tool Set
7CA0110S
▪ For producing precision 45° single flares on copper,
10
brass, aluminium pipes up to 1 mm wall thickness
PC.
▪ Suitable for pipes in refrigeration, air conditioning
90° 90°
115°

Kg
KT NO. Contents 1.68 1 / 12

3-30 mm
7915-30
1/8~1-1/8"

3/16", 1/4", 5/16", 3/8", 7/16",

7CA22P20S
1/2", 5/8"

7CA22P01

Adapter for 3/16", 1/4", 5/16", 3/8", 7/16",

expander 1/2", 5/8"

Swaging Set
7CA0309S
▪ For copper, aluminium pipe
▪ 8 expander heads sizes
▪ 6 mandrels design per each expander head is for
swaging evenly, and providing accurate guiding
force transmission
▪ For copper, brass, aluminium pipes up to 1.2 mm
wall thickness
Kg
KT NO. Contents 2.73 1/5

7CA23-14
9
PC.
7CA23-A08S 1/4"

7CA23-A12S 3/8"

7CA23-A16S 1/2"

7CA23-A20S 5/8"

7CA23-A24S 3/4"

7CA23-A28S 7/8"

7CA23-A32S 1"

7CA23-A36S 1-1/8"

357
 Flaring Tool
7CA21-24S
▪ Specifical design for smooth flares
▪ 45° flaring tool on copper pipes
▪ Designed for high pressure R410A systems

90°

Capacity g
KT NO. inch max. (mm)
7CA21-24S 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 1.2 1556 1 / 12

Type of the flares

1 2

90° 90°
115°

Single flare Double flare Bubble flare

358
180° Tube Bender
7CA11-08
▪ Suitable for use in refrigeration and air-conditioning, oil supply,
heating installations, floor heating
▪ For accurate bending up to 180° of pipes made of soft copper,
brass, aluminium and precision steel (pipe up to 0.6 mm wall
thickness for steel)
▪ Ø 8 - 16 mm (5/16" – 3/4")
▪ Bending with the bending radius display and measurement scale

max. R(radius) Overall length g

KT NO. inch mm inch mm mm inch mm
7CA11-08 5/16 8 0.035 0.9 18 9 236 712 1 / 20

7CA11M 7CA11S
180°

7CA11-10M / 7CA11-12S

45°

7CA11-12M / 7CA11-16S

7CA11-15M / 7CA11-16M
7CA11-20S / 7CA11-24S

R(radius) Overall length g

KT NO. mm max. (mm) inch mm inch mm
7CA11-10M 10 0.9 15/16 24 13 334 964 1 / 20
7CA11-12M 12 1.2 1-1/2 38 20 493 1833 1 / 12
7CA11-15M 15 1.2 2-1/4 57 30 758 2832 1/8
7CA11-16M 16 1.2 2-1/4 57 30 758 2832 1/8

R(radius) Overall length g

KT NO. inch max. (inch) inch mm inch mm
7CA11-12S 3/8 0.035 15/16 24 13 334 964 1 / 20
7CA11-16S 1/2 0.049 1-1/2 38 20 493 1833 1 / 12
7CA11-20S 5/8 0.049 2-1/4 57 30 758 2832 1/6
7CA11-24S 3/4 0.049 3 76 30 758 3330 1/6

359
 Stepped Ratchet Radiator key Set
7HA03
▪ Suitable for installation and removal of most radiator
valves and tank connectors
▪ Key has fittings from small to large, stepped along the
length of the key, for different internal hexagon and
internal lug valve sizes
▪ 1/2"DR. ratchet makes installations quickly and easily
▪ 4724-11G can be used as general ratchet, DIN 3122,
11° gear action degree (32 teeth)

21mm (1")
16.4mm (3/4")
12.3mm (1/2")
11.6mm
Kg
Contents 0.74 1 / 24 9.6mm (3/8")

Hexagon A/F
4724-11G

7HA11 3/8", 1/2", 3/4", 1"

4724-01

A/C & Refrigeration Service Tools & Set

3411
▪ Present torque wrench, no adjustment
▪ Anti-slip open head design
▪ Offer customize torque setting from your
requirement
▪ Tolerance of torque ±4%

Size L Pipe g
KT NO. Nm
mm mm Ø
341118-17M 17 18 260 1/4" 480 1 / 40
341142-22M 22 42 260 3/8" 480 1 / 40
341155-26M 26 55 260 1/2" 480 1 / 40
341165-29M 29 65 315 5/8" 570 1 / 20

3411003MR01
4
PC.

Kg 3.29 1/5
Contents

17 mm x 18 Nm
22 mm x 42 Nm
3411
26 mm x 55 Nm
29 mm x 65 Nm

360
361
 SCREWDRIVERS &
HEX KEY & BITS
▪ Screwdriver

▪ Insulated Screwdriver

▪ Nut Spinner

▪ Bit

▪ Ratchet Screwdriver

▪ Power Driving

▪ Hex Key

▪ Bicycle Repair Tool

▪ L-type & T-type Wrench

▪ Wing & Flag Handle torx

Screwdriver

362
363
 Screwdriver
• Shank material - Chrome vanadium alloy steel
• Grip material - PP
• Finishing - chrome plated
KT No. & D1

1411
▪ Phillips head, round shank
▪ DIN ISO 8764

g
KT NO. No. mm inch mm
14110003 PH0 75 3 3.0 27 12 / 240
14110104 PH1 100 4 5.0 40.8 12 / 240
14110214 PH2 38 1-1/2 6.0 30 12 / 144
14110204 PH2 100 4 6.0 70 12 / 96
14110204-E* PH2 100 4 6.0 84 12 / 96
14110205-E* PH2 125 5 6.0 114 12 / 144
14110206 PH2 150 6 6.0 82 12 / 144
14110206-E* PH2 150 6 6.0 96 12 / 144
14110208-E* PH2 200 8 6.0 137 12 / 144
14110306 PH3 150 6 8.0 126 12 / 144
14110308 PH3 200 8 8.0 146 12 / 144
* Enlarged handle

1412
▪ Slotted head, round shank
▪ DIN ISO 2380

KT NO. g
mm inch mm mm inch mm
14120303 3.0 1/8 0.5 75 3 3 27 12 / 240
14120404 4.0 5/32 0.8 100 4 4 33.4 12 / 240
14125504 5.5 7/32 0.8 100 4 5 41 12 / 240
14126514 6.5 1/4 1.2 38 1-1/2 6 30 12 / 144
14126504 6.5 1/4 1.2 100 4 6 70 12 / 96
14126504-E* 6.5 1/4 1.2 100 4 6 107 12 / 96
14126506 6.5 1/4 1.2 150 6 6 79.4 12 / 144
14126506-E* 6.5 1/4 1.2 150 6 6 124 12 / 144
14120806 8.0 5/16 1.2 150 6 8 124 12 / 144
14120808 8.0 5/16 1.2 200 8 8 146 12 / 144
* Enlarged handle

2411
▪ Two-way screwdriver hex shank

KT NO. g
No. mm mm mm inch
24110204 PH2 7.0 1.2 100 4 89 20 / 240
24110214 PH2 7.0 1.2 38 1-1/2 42 20 /240

24110204

24110214

364
Screwdriver Set
• Shank material - Chrome vanadium alloy steel
• Grip material - PP
• Finishing - chrome plated

35105MR
Kg
5 7
KT NO. Contents 0.54 1 / 20 PC. PC.

1411 PH1 x 100, PH2 x 100

35105MR
1412 4 x 100, 5.5 x 100, 6.5 x 150

35107MR
Kg 0.72 1 / 20
KT NO. Contents

1411 PH1 x 100, PH2 x 100, PH3 x 150

35107MR 35105MR 35107MR
4 x 100, 5.5 x 100, 6.5 x 150,
1412 8 x 150
6
PC.

35116MR01
Kg 0.65 1 / 20
KT NO. Contents

PH1 x 100, PH2 x 100,

1411 PH3 x 150
35116MR01
4 x 100, 5.5 x 100,
1412 6.5 x 150

35116MR01

365
 Screwdriver
• Shank material - SNCM - V alloy steel
• Grip material - PP +TPR
• Finishing - chrome plated with black tip KT No. & D1

1421
▪ Phillips head, round shank
▪ DIN ISO 8764

g
KT NO. No. mm inch mm
14210023 PH0 60 2-3/8 3.2 35 12 / 144
14210132 PH1 80 3-1/8 4.5 57 12 / 96
14210104 PH1 100 4 4.5 59 12 / 96
14210214 PH2 38 1-1/2 6.0 44 12 / 144
14210204 PH2 100 4 6.0 84 12 / 96
14210206 PH2 150 6 6.0 95 12 / 144
14210306 PH3 150 6 8.0 142 12 / 144

g
KT NO. No. mm inch mm
14210112 PH1 300 12 4.5 85 12 / 96
14210212 PH2 300 12 6.0 127 12 / 96 xx12
14210116 PH1 400 16 4.5 93 12 / 96 1421xx16

14210216 PH2 400 16 6.0 150 12 / 96

1422
▪ Slotted head, round shank
▪ DIN ISO 2380

KT NO. g
mm inch mm mm inch mm
14220303 3.0 1/8 0.5 75 3 3.2 38 12 / 144
14220404 4.0 5/32 0.8 100 4 4 56 12 / 96
14220503 5.0 3/16 0.8 75 3 5 60 12 / 96
14220504 5.0 3/16 0.8 100 4 5 62 12 / 96
14225503 5.5 7/32 1.0 75 3 5 71 12 / 96
14225504 5.5 7/32 1.0 100 4 5 75 12 / 96
14225505 5.5 7/32 1.0 125 5 5 78 12 / 144
14225506 5.5 7/32 1.0 150 6 5 82 12 / 144
14226514 6.5 1/4 1.2 38 1-1/2 6 44 12 / 144
14226504 6.5 1/4 1.2 100 4 6 84 12 / 96
14226506 6.5 1/4 1.2 150 6 6 94 12 / 144
14220806 8.0 5/16 1.2 150 6 8 141 12 / 144
14220807 8.0 5/16 1.2 175 7 8 153 12 / 144
14220808 8.0 5/16 1.2 200 8 8 163 12 / 144
14221008 10.0 3/8 1.6 200 8 10 212 12 / 72

KT NO. g
mm inch mm mm inch mm
14220512 5.0 3/16 0.8 300 12 5 94 12 / 96
1422xx12
14220516 5.0 3/16 0.8 400 16 5 109 12 / 96 1422xx16
14226512 6.5 1/4 1.2 300 12 6 127 12 / 96
14226516 6.5 1/4 1.2 400 16 6 150 12 / 96

366
Screwdriver • Shank material - SNCM - V alloy steel
• Grip material - PP +TPR
KT No. & D1
• Finishing - chrome plated with black tip

1423
▪ For torx head screw, round shank
g
KT NO. Size mm inch mm
14230602 T6 48 2 3.2 35 12 / 144
14230702 T7 48 2 3.2 35 12 / 144
14230803 T8 75 3 3.2 38 12 / 144
14230903 T9 75 3 3.2 38 12 / 144
14231003 T10 75 3 3.2 38 12 / 144
14231503 T15 75 3 4.0 55 12 / 144
14231510 T15 250 10 5.0 86 12 / 96
14232004 T20 100 4 5.0 63 12 / 144
14232010 T20 250 10 5.0 86 12 / 96
14232504 T25 100 4 6.0 83 12 / 144
14232510 T25 250 10 6.0 117 12 / 96
14232704 T27 100 4 6.0 83 12 / 144
14233005 T30 125 5 6.0 89 12 / 144 14232010, 14232510, 14233010 at the
14233010 T30 250 10 6.0 118 12 / 96 dashboard, car body, engine compart
ment as well as in industry.
14234006 T40 150 6 8.0 142 12 / 144

1424
▪ Square head

KT NO. g
Size mm inch mm
14240105 RB1 125 5 5.0 61 20 / 240
14240204 RB2 100 4 6.0 76 12 / 144
14240206 RB2 150 6 6.0 89 12 / 144

1427
▪ For torx head screw, round shank
▪ Tamper resistant type
KT NO. g
Size mm inch mm
14270803 T8H 75 3 3.2 38 12 / 144
14270903 T9H 75 3 3.2 38 12 / 144
14271003 T10H 75 3 3.2 38 12 / 144
14271503 T15H 75 3 4.0 55 12 / 144
14272004 T20H 100 4 5.0 53 12 / 144
14272504 T25H 100 4 6.0 83 12 / 144
14272704 T27H 100 4 6.0 83 12 / 144
14273005 T30H 125 5 6.0 89 12 / 144
14274006 T40H 150 6 8.0 142 12 / 144

1428
▪ Pozidriv head, round shank
▪ DIN ISO 8764

KT NO. g
No. mm inch mm
14280023 PZ0 60 2-3/8 3.2 37 12 / 96
14280132 PZ1 80 3-1/8 4.5 56 12 / 96
14280104 PZ1 100 4 4.5 60 12 / 96
14280204 PZ2 100 4 6.0 84 12 / 96
14280306 PZ3 150 6 8.0 141 12 / 144

367
 Screwdriver Set • Shank material - SNCM - V alloy steel
• Grip material - PP + TPR
• Finishing - chrome plated with black tip
31107MR
KT NO. Contents
Kg 0.7 1 / 20 7 8
PC. PC.
PH0 x 60, PH1 x 80, PH1 x 100,
31107MR 1421
PH2 x 38, PH2 x 100, PH2 x 150,
PH3 x 150

30118MR
Kg 0.87 1 / 20
KT NO. Contents
3 x 75, 5 x 75, 5 x 100, 8 x 150,
30118MR 1422 8 x 200,6.5 x 100, 6.5 x 150,
6.5 x 38

31107MR 30118MR
30115MR
Kg 0.54 1 / 20
5 6
KT NO. Contents PC. PC.

1421 PH1 x 80, PH2 x 100

30115MR
1422 4 x 100, 5.5 x 125, 6.5 x 150

31116MR
Kg 0.56 1 / 20
KT NO. Contents

1421 PH0 x 60, PH1 x 80, PH2 x 100

31116MR
1422 3 x 75, 5.5 x 100, 6.5 x 150

30115MR 31116MR

31216MR
Kg
6 7
KT NO. Contents 0.56 1 / 20 PC. PC.

1421 PH1 x 80, PH2 x 100

31216MR
1422 5 x 75, 5 x 100, 6.5 x 100, 6.5 x 150

30117MR
Kg 0.72 1 / 20
KT NO. Contents

1421 PH1 x 80, PH2 x 100

30117MR 3 x 75, 4 x 100, 5.5 x 125,
1422 6.5 x 150, 8 x 175
31216MR 30117MR

8
33108MR PC.
7
Kg 1.3 1 / 10
KT NO. Contents PC.

PH0 x 60, PH1 x 100, PH2 x 100,

1421 PH2 x 38
33108MR
1422 3 x 75, 5.5 x 100, 6.5 x 38, 6.5 x 100

30127MR
Kg 0.82 1 / 20
KT NO. Contents

1428 PZ1 x 80, PZ2 x 100, PZ3 x 150

30127MR 4 x 100, 5.5 x 125, 6.5 x 150,
1422 8 x 175 33108MR 30127MR

368
Screwdriver Set • Shank material - SNCM - V alloy steel
• Grip material - PP + TPR
• Finishing - chrome plated with black tip

30315PR 5 7
PC. PC.
Kg 0.37 1 / 20
KT NO. Contents

T15 x 75, T20 x 100, T25 x 100,

30315PR 1423 T27 x 100, T30 x 125

30317PR
Kg 0.78 1 / 20
KT NO. Contents

T10 x 75, T15 x 75, T20 x 100,

30317PR 1423 T25 x 100, T27 x 100, T30 x 125, 30315PR 30317PR
T40 x 150
9 7
PC. PC.
30319PR
Kg 0.88 1 / 20
KT NO. Contents

T8 x 75, T9 x 75, T10 x 75, T15 x 75,

30319PR 1423 T20 x 100, T25 x 100, T27 x 100,
T30 x 125, T40 x 150

30307PR
Kg 0.78 1 / 20
KT NO. Contents
30319PR 30307PR
T10H x 75, T15H x 75, T20H x 100,
30307PR T25H x 100, T27H x 100,
1427
T30H x 125, T40H x 150
9
PC.

30309PR
Kg 0.88 1 / 20
KT NO. Contents

T8H x 75, T9H x 75, T10H x 75,

T15H x 75, T20H x 100,
30309PR 1427 T25H x 100, T27H x 100,
T30H x 125, T40H x 150

30309PR

369
 Go Thru Screwdriver & Set
• Shank material - Chrome vanadium alloy steel
• Grip material - PP
Pl e a s e w e a r p r o p e r s a f e t y g e a r w h i l e w o r k i n g . • Finishing - chrome plated
KT No. & D1

1481
▪ Phillips head, hex-shank
▪ DIN ISO 8764

KT NO. g
No. mm inch mm
14810103 PH1 75 3 5.0 48 12 / 240
14810204 PH2 100 4 6.0 86 12 / 144
14810204-E* PH2 100 4 6.0 130 12 / 96
14810205 PH2 125 5 6.0 94 12 / 144
14810205-E* PH2 125 5 6.0 170 12 / 144
14810306 PH3 150 6 8.0 170 12 / 144
14810412 PH4 300 12 10.0 362 10 / 40
* Enlarged handle

1482
▪ Slotted head, hex-shank
▪ DIN ISO 2380

KT NO. g
mm inch mm mm inch mm
14825503 5.5 7/32 0.8 75 3 5.0 50 12 / 240
14826504 6.5 1/4 1.2 100 4 6.0 88 12 / 144
14826504-E* 5.5 1/4 1.2 100 4 6.0 130 12 / 96
14826505-E* 6.5 1/4 1.2 125 5 6.0 170 12 / 144
14826506 6.5 1/4 1.2 150 6 6.0 120 12 / 144
14820806 8.0 5/16 1.2 150 6 8.0 169 12 / 144
14821012 10.0 12/32 1.6 300 12 10.0 322 10 / 40
* Enlarged handle

36206MR
6
Kg 1.18 1 / 20 PC.
Contents

1481 PH1 x 75, PH2 x 100, PH3 x 150

5.5 x 75, 6.5 x 150,

1482 8.0 x 150

370
Go Thru Screwdriver Set • Shank material - Chrome vanadium alloy steel
• Grip material - PP
• Finishing - chrome plated

35114MR 35114MR01
▪▪Standard & insulated & go thru screwdriver set
14
PC.

35114MR01 35114MR

Kg 2.2 1/4
KT NO. Contents

PH0 x 75, PH1 x 100, PH2 x 100, PH2 x 150, PH2 x 38,
35114MR 6.5 x 150 1411 PH3 x 150
1472

3 x 75, 4 x 100, 5.5 x 100, 6.5 x 150, 6.5 x 38, 8 x 200

1412
35114MR01 PZ2 x 100
1478 10 x 300
1482

371
 Feature
Col or r u b b e r h a nd l e
M a gne t
G r ip ma te r ia l - PP + T PR
Ch r ome p l a te d
with b l a ck tip

Go thru a nd
Sh a nk ma te r ia l - O ne p ie ce cu sh ioning e f f e ct
SN CM - V a l l oy st e e l const r u ction

Go Thru Screwdriver & Set

• Shank material - SNCM - V alloy steel
• Grip material - PP + TPR
Pl e a s e w e a r p r o p e r s a f e t y g e a r w h i l e w o r k i n g . • Finishing - chrome plated with black tips KT No. & D1

1461
▪ Phillips head, hex-shank
▪ DIN ISO 8764

KT NO. g
No. mm inch mm
14610103 PH1 75 3 5.0 120 12 / 96
14610204 PH2 100 4 6.0 134 12 / 96
14610206 PH2 150 6 6.0 144 12 / 144
14610306 PH3 150 6 8.0 219 12 / 96

1462
▪ Slotted head, hex-shank
▪ DIN ISO 2380

KT NO. g
mm inch mm mm inch mm
14625504 5.5 7/32 1.0 100 4 5.0 123 12 / 96
14626504 6.5 1/4 1.2 100 4 6.0 134 12 / 96
14626506 6.5 1/4 1.2 150 6 6.0 146 12 / 144
14620806 8.0 5/16 1.2 150 6 8.0 219 12 / 144
14620807 8.0 5/16 1.2 175 7 8.0 228 12 / 96
14621008 10 3/8 1.6 200 8 10 310 12 / 72
14621210 12 15/32 2.0 250 10 10 346 10 / 40

30206MR
6
Kg 1.2 1 / 20 PC.
Contents

1461 PH1 x 75, PH2 x 100, PH3 x 150

5.5 x 100, 6.5 x 150,

1462 8.0 x 175

372
Screwdriver Set
31512MR 31512MR01
▪ Standard & go thru screwdriver set
72
Each PC.
KT NO. Contents Q'ty

PH2 x 100
1481 PH2 x 125 24110204

31512MR PH2 x 38
24110214
1482 6.5 x 150
Screwdriver shelf size (mm) : 420 x 250 x 210
PH2 x 100,
1481 6 Kg
PH1 x 75, KT NO. CUFT
PH2 x 100E*,
1481 PH2 x 125E*
PH3 x 150
31512MR-A 2.47 0.78
31512MR01 5.5 x 75, 31512MR-D 8.23 0.714
1482 6.5 x 100,
1482 6.5 x 125E* 6.5 x 100E*, 31512MR01-A 3.5 1.5
8 x 150 31512MR01-D 7.86 0.38

31416MR 96
▪ Standard screwdriver set PC.
Each
KT NO. Contents Q'ty

PH0 x 60, PH1 x 80, PH1 x 100,

PH2 x 38, PH2 x 100,
1421
PH2 x 150, PH3 x 150
Screwdriver shelf size (mm) : 600 x 240 x 210
31416MR 6
KT NO. Kg CUFT
3.0 x 75, 4.0 x 100, 5.5 x 75,
1422 5.5 x 100, 5.5 x 125, 6.5 x 38,
31416MR-A 3.3 1.97
6.5 x 100, 6.5 x 150, 8.0 x 150
31416MR-D 6.2 0.71

31516MR
▪ Standard & go thru screwdriver set 96
PC.
Each
KT NO. Contents Q'ty
T8H x 75, T9H x 75, T10H x 75,
T15H x 75, T20H x 100,
1427 T25H x 100, T27H x 100,
T30H x 125, T40H x 150
31516MR PH1 x 75, PH2 x 100, 6 Screwdriver shelf size (mm) : 600 x 240 x 210
1461 PH3 x 150 KT NO. Kg CUFT

5.5 x 100, 6.5 x 100, 6.5 x 150, 31516MR-A 3.3 1.97

1462 8.0 x 175 31516MR-D 10.1 0.71

31519MR 114
▪ Standard Screwdriver set PC.
Each
KT NO. Contents Q'ty

PH0 x 75, PH1 x 100,

PH2 x 100, PH2 x 100E*,
1411 PH2 x 150, PH2 x 150E*,
PH2 x 38, PH3 x 150, Screwdriver shelf size (mm) : 650 x 250 x 210

31519MR PH3 x 200 6 KT NO. Kg CUFT

3.0 x 75, 4.0 x 100, 5.5 x 100,
31519MR-A 3.5 1.97
6.5 x 100, 6.5 x 150,
1412 6.5 x 100E*, 6.5 x 38, 8 x 150, 31519MR-D 10.34 0.714
8 x 200, 6.5 x 150E*
* Enlarged handle

373
 Screwdriver Display
87104
▪ Overall size -W 325 x D 205 x H 270 mm
▪ Weight - 1.2 Kg / Cuft - 0.3

Reversible Handle
91232

KT NO. g
mm inch
91232 135 5-1/4 84 12 / 144

Power Bit • Bits for screwdriver handle 91232

• Material - SNCM - V alloy steel

1317
1317012PN

1317012ZN
KT NO. Size g
mm inch 1317046SN

1317012PN PH1 PH2 175 7 45 40 / 400 1317057SN

1317012ZN PZ2 PZ1 175 7 45 40 / 400
1317115TN
1317046SN 4.0 6.0 175 7 45 40 / 400
1317057SN 5.0 7.0 175 7 45 40 / 400 1317225TN

1317115TN T10 T15 175 7 45 40 / 400 1317340TN

1317225TN T20 T25 175 7 45 40 / 400
1317401PN
1317340TN T30 T40 175 7 45 40 / 400
1317401PN 4.0 PH1 175 7 45 40 / 400 131744BHN
131744BHN B4 H4 175 7 45 40 / 400
1317501ZN
1317501ZN 5.0 PZ1 175 7 45 40 / 400
131755BHN B5 H5 175 7 45 40 / 400 131755BHN
1317602PN 6.0 PH2 175 7 45 40 / 400
1317602PN
131766BHN B6 H6 175 7 45 40 / 400
1317702ZN 7.0 PZ2 175 7 45 40 / 400 131766BHN

1317702ZN

374
Screwdriver Set
• Shank material - chrome vanadium alloy steel
• Grip material - PP + TPR
• Shank finishing - chrome plated

32518MR
▪ Two-way screwdriver set
Kg
11
Contents 0.7 1 / 20 PC.

1317012PN PH1 PH2

1317012ZN PZ2 PZ1
1317046SN 4.0 6.0
1317057SN 5.0 7.0
1317115TN T10 T15
1317225TN T20 T25
1317340TN T30 T40
131744BHN B4 H4
131755BHN B5 H5
131766BHN B6 H6 Blow case size (mm) : 233 x 120 x 43 (0.07cuft)

91232

32518MR01
▪ Two-way screwdriver set
Kg
11
Contents 0.7 1 / 20 PC.

1317115TN T10 T15

1317225TN T20 T25
1317340TN T30 T40
1317401PN 4.0 PH1
131744BHN B4 H4
1317501ZN 5.0 PZ1
131755BHN B5 H5
1317602PN 6.0 PH2
131766BHN B6 H6
1317702ZN 7.0 PZ2 Blow case size (mm) : 233 x 120 x 43 (0.07cuft)
91232

32518MR02
▪ Two-way screwdriver set
Kg
11
Contents 0.7 1 / 20 PC.

1317115TN T10 T15

1317225TN T20 T25
1317340TN T30 T40
1317401PN 4.0 PH1
131744BHN B4 H4
1317012PN PH1 PH2
131755BHN B5 H5
1317602PN 6.0 PH2
131766BHN B6 H6
1317057SN 5.0 7.0
Blow case size (mm) : 233 x 120 x 43 (0.07cuft)
91232

375
 Insulated Screwdriver
• Shank material - SNCM - V alloy steel
• Grip material - PP + TPR 1000V
• Finishing - chrome plated with black tip KT No. & D1

1471
▪ Phillips head, round shank
▪ IEC 60900:2004

KT NO. g
No. mm inch mm
14710003 PH0 75 3 3.0 37 12 / 144
14710104 PH1 100 4 4.5 54 12 / 216
14710204 PH2 100 4 6.0 77 12 / 144
14710306 PH3 150 6 8.0 135 12 / 144

1472
▪ Slotted head, round shank
▪ IEC 60900:2004

KT NO. g
mm inch mm mm inch mm
14720303 3.0 1/8 0.5 75 3 3.0 38 12 / 144
14720404 4.0 3/16 0.8 100 4 4.0 44 12 / 96
14725505 5.5 7/32 1.0 125 5 5.5 72 12 / 144
14726506 6.5 1/4 1.2 150 6 6.5 87 12 / 144
14720807 8.0 5/16 1.2 175 7 8.0 143 12 / 144

1474
▪ Square head, round shank
▪ IEC 60900:2004

KT NO. g
Size mm inch mm
14740105 RB1 125 5 5.5 72 12 / 144
14740206 RB2 150 6 6.5 87 12 / 144

1478
▪ Pozidriv head, round shank
▪ IEC 60900:2004

KT NO. g
Size mm inch mm
14780003 PZ0 75 3 3.0 37 12 / 144
14780104 PZ1 100 4 4.5 54 12 / 96
14780204 PZ2 100 4 6.0 77 12 / 144
14780306 PZ3 150 6 8.0 135 12 / 144

376
Insulated Screwdriver Set
• Shank material - SNCM - V alloy steel
• Grip material - PP + TPR 1000V
• Finishing - chrome plated with black tip

30607MR 30607MR02 30617MR

7
Kg
PC.
KT NO. Contents 0.86 1 / 20

4 x 100, 5.5 x 125, 6.5 x 150, 8.0 x 175

1472
30607MR
PZ1 x 100, PZ2 x 100, PZ3 x 150
1478
PH1 x 100, PH2 x 100
1471
30607MR02 4 x 100, 5.5 x 125, 6.5 x 150
1472
1 x 125, 2 x 150
1474
30607MR 30607MR02
PH1 x 100, PH2 x 100, PH3 x 150
1471
30617MR
4 x 100, 5.5 x 125, 6.5 x 150, 8.0 x 175
1472

30617MR

30605MR 30615MR
5
PC.

Kg 0.50 1 / 30
KT NO. Contents

4 x 100, 5.5 x 125, 6.5 x 150

1472
30605MR
PZ1 x 100, PZ2 x 100
1478
PH1 x 100, PH2 x 100 30605MR
1471
30615MR
4 x 100, 5.5 x 125, 6.5 x 150
1472

30615MR

377
 Nut Spinner
• Shank material - chrome vanadium alloy steel
• Grip material - PP + TPR
• Shank finishing - chrome plated

1450
KT NO. g
mm mm mm mm
1450-04 4 4.5 125 225 74 12 / 144
1450-45 4.5 4.5 125 225 76 12 / 144
1450-05 5 5.0 125 225 75 12 / 144
1450-55 5.5 5.0 125 225 81 12 / 144
1450-06 6 6.0 125 225 81 12 / 144
1450-07 7 6.0 125 235 103 12 / 144
1450-08 8 7.0 125 235 108 12 / 144
1450-09 9 7.0 125 235 110 12 / 144
1450-10 10 8.0 125 235 114 12 / 144
1450-11 11 9.0 125 245 166 12 / 144
1450-12 12 10.0 125 245 168 12 / 144
1450-13 13 10.0 125 245 173 10 / 120

5450

KT NO. g
inch mm mm mm
5450-08 1/4 12 125 223 80 12 / 144
5450-10 5/16 8.2 125 223 105 12 / 144

Flexible Nut Spinner

1453
▪ For the hose clamps on radiator hoses

KT NO. g
mm mm mm mm
1453-05 5 9 190 300 136 12 / 144
1453-06 6 9 190 300 135 12 / 144
1453-07 7 9.3 190 300 134 12 / 144
1453-08 8 9.5 190 300 133 12 / 144
1453-10 10 9.5 190 300 132 12 / 144

378
Bit
• Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted
• Total length : 25 mm 1/4" Hex size shank driver
order unit :one box Item No.xxxxxxx.B

1025P Phillips head 1025T

▪ For torx head screw
PHILLIPS
▪ DIN head
ISO 2351-2
KT NO. g g
No. KT NO. Size
102500P (102500P.B) PH0 4.5 102506T (102506T.B) T6 4.5
102501P (102501P.B) PH1 5.0 102507T (102507T.B) T7 4.5
20 / 200
102502P (102502P.B) PH2 5.5 102508T (102508T.B) T8 4.5
(50 / 1000)
102503P (102503P.B) PH3 6.0 102509T (102509T.B) T9 4.5
102504P (102504P.B) PH4 6.0 102510T (102510T.B) T10 4.5
102515T (102515T.B) T15 5.0
102512P Phillips head 102520T (102520T.B) T20 5.0 20 / 200
102525T (102525T.B) T25 5.0 (50 / 1000)
▪ Reduced for dry-wall
102527T (102527T.B) T27 5.0
▪ DIN ISO 2351-2
g 102530T (102530T.B) T30 5.0
KT NO. No. 102535T (102535T.B) T35 5.6
20 / 200 102540T (102540T.B) T40 6.0
102512P (102512P.B) PH2 5.5
(50 / 1000) 102545T (102545T.B) T45 7.0
102550T (102550T.B) T50 8.0
1025S Slotted head
▪ DIN ISO 2351-1 1025U
Tip Tip
KT NO. width thickness g ▪ For torx head screw
(mm) (mm) ▪ Tamper resistant type
KT NO. g
102503S1 (102503S1.B) 3.0 0.5 4.5 Size
102535S1 (102535S1.B) 3.5 0.6 4.5
102507U (102507U.B) T7H 4.0
102504S1 (102504S1.B) 4.0 0.5 4.5
102508U (102508U.B) T8H 4.5
102504S2 (102504S2.B) 4.0 0.8 5.0
102509U (102509U.B) T9H 4.5
102545S1 (102545S1.B) 4.5 0.6 5.0
102510U (102510U.B) T10H 4.5
102505S1 (102505S1.B) 5.0 0.8 5.0
20 / 200 102515U (102515U.B) T15H 4.5 20 / 200
102555S1 (102555S1.B) 5.5 0.8 5.0
(50 / 1000) 102520U (102520U.B) T20H 5.0 (50 / 1000)
102555S2 (102555S2.B) 5.5 1.0 5.0
102525U (102525U.B) T25H 5.0
102506S1 (102506S1.B) 6.0 1.0 5.0
102527U (102527U.B) T27H 5.0
102565S1 (102565S1.B) 6.5 1.2 5.5
102530U (102530U.B) T30H 5.5
102507S1 (102507S1.B) 7.0 1.2 5.5
102540U (102540U.B) T40H 5.5
102508S1 (102508S1.B) 8.0 1.2 6.0
102508S2 (102508S2.B) 8.0 1.6 6.0
1025M Spline head
1025H 5025H Hexagon head
▪ DIN 65254
▪ DIN ISO 2351-3
KT NO. g
g size
KT NO. mm
102504M M4 5.0
102515H (102515H.B) H1.5 4.0 102505M M5 5.0
102502H (102502H.B) H2 4.5 102506M M6 6.0 20 / 200
102525H (102525H.B) H2.5 4.5 102508M M8 7.0
102503H (102503H.B) H3 5.0 102510M M10 10.0
102504H (102504H.B) H4 5.5 20 / 200
102505H (102505H.B) H5 6.0 (50 / 1000)
102506H (102506H.B) H6 6.0 1025V
102507H (102507H.B) H7 7.5
▪ For inside 5-star screw
102508H (102508H.B) H8 9.0
▪ Tamper resistant type
102510H (102510H.B) H10 11.5 g
KT NO. Size
KT NO. g
inch 102508V IPR 8 5.0
502503H (502503H.B) 3/64 4.0 102509V IPR 9 5.0
502504H (502504H.B) 1/16 4.0 102510V IPR 10 5.0
502505H (502505H.B) 5/64 4.5 102515V IPR 15 5.0
502506H (502506H.B) 3/32 5.0 20 / 200 102520V IPR 20 5.0 20 / 200
502507H (502507H.B) 7/64 5.0 (50 / 1000) 102525V IPR 25 5.0
502508H (502508H.B) 1/8 5.0 102527V IPR 27 5.0
502509H (502509H.B) 9/64 5.0 102530V IPR 30 5.0
502510H (502510H.B) 5/32 5.5 102540V IPR 40 6.4

379
 Bit
• Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted

1/4" Hex size shank driver 5/16" Hex size shank driver
order unit : one blister card Item No.xxxxxxx.B order unit : one box

1025Z 1800P Phillips head

▪ Pozidriv type ▪ 36 / 80 / 125mmL
▪ DIN ISO 2351-2 ▪ DIN ISO 2251-2
KT NO. g
No. Overall length
KT NO. g
102501Z (102501Z.B) PZ1 5.0 No. (mm)
20 / 200
102502Z (102502Z.B) PZ2 5.5 183601P PH1 36 12 20 / 200
(50 / 1000)
102503Z (102503Z.B) PZ3 5.5 183602P PH2 36 12 20 / 200
183603P PH3 36 12 20 / 200
183604P PH4 36 12 20 / 200
1025R Square head 188002P PH2 80 31 10 / 100
188003P PH3 80 31 10 / 100
188004P PH4 80 31 10 / 100
g
181202P PH2 125 50 10 / 100
KT NO. Size 181203P PH3 125 50 10 / 100
102500R (102500R.B) RB0 4.5
102501R (102501R.B) RB1 5.0 20 / 200
102502R (102502R.B) RB2 5.5 (50 / 1000)
102503R (102503R.B) RB3 5.5
1800S Slotted head
▪ 36 / 80mmL
1360Z Double Pozidriv head ▪ DIN ISO 2351-1
Tip Tip Overall
KT NO. width thickness length g
Overall length g (mm) (mm) (mm)
KT NO. No. (mm)
183608S 8 1.2 36 11.5 20 / 200
1360012Z PZ1 / PZ2 60 13.0 183609S 9 1.6 36 13.0 20 / 200
1360022Z PZ2 / PZ2 60 13.5 10 / 100 183610S 10 1.6 36 14.5 20 / 200
1360023Z PZ2 / PZ3 60 13.5 183611S 11 2.0 36 16.0 20 / 200
183612S 12 2.0 36 17.5 12 / 120
183614S 14 2.0 36 20.5 12 / 120
1360Z Pozidriv / Slotted head 188008S 8 1.2 80 32.0 10 / 100
188010S 10 1.6 80 33.0 10 / 100
188012S 12 2.0 80 34.0 6 / 60
Tip Tip Overall
KT NO. width thickness length g
No. (mm) (mm) (mm)

1360451Z PZ1 4.5 0.6 60 13.0

1360552Z PZ2 5.5 1.0 60 13.5 10 / 100 1800H Hexagon head
1360703Z PZ3 7.0 1.2 60 13.5
▪ 32 / 36 mmL

1360P Double phillips head KT NO. mm

Overall length
(mm)
g

183203H H3 32 9.0 20 / 200

Overall length g
183204H H4 32 9.6 20 / 200
KT NO. No. (mm) 183205H H5 32 10.4 20 / 200
1360012P PH1 / PH2 60 13.0 183206H H6 32 11.0 20 / 200
1360022P PH2 / PH2 60 13.5 10 / 100 183207H H7 32 12.2 20 / 200
1360023P PH2 / PH3 60 13.5 183208H H8 32 13.4 20 / 200
183210H H10 32 17.2 20 / 200
183212H H12 32 21.7 12 / 120
183604H H4 36 11.3 20 / 200
1360P Phillips / Slotted head
183605H H5 36 11.8 20 / 200
183606H H6 36 13.0 20 / 200
Tip Tip Overall
183607H H7 36 14.0 20 / 200
KT NO. width thickness length g 183608H H8 36 15.0 20 / 200
No. (mm) (mm) (mm)
183610H H10 36 18.9 20 / 200
1360451P PH1 4.5 0.6 60 13.0 183612H H12 36 25.0 12 / 120
1360552P PH2 5.5 0.8 60 13.5 10 / 100 183614H H14 36 31.2 12 / 120
1360703P PH3 7.0 1.2 60 13.5

380
Bit Set 25
PC.

102502P-S1
g 161 12 / 72
Contents

1025P PH2 x 25 PC.

102502Z-S1
g 161 12 / 72
Contents

1025Z PZ2 x 25 PC.

102502P-S1 102502Z-S1

102510T-S1
g 136 12 / 72
Contents

1025T T10 x 25 PC.

102515T-S1
g 140 12 / 72
Contents

1025T T15 x 25 PC.

102502T-S1 102515T-S1

102520T-S1
g 142 12 / 72
Contents

1025T T20 x 25 PC.

102525T-S1
g 144 12 / 72
Contents

1025T T25 x 25 PC.

102520T-S1 102525T-S1

102530T-S1
g 146 12 / 72
Contents

1025T T30 x 25 PC.

102530T-S1

381
 Bit • Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted
10mm H EX SH A NK B IT
No .163605M M 5x36 mm 12PC. 4 71059 1 9 672 81

5/16" Hex size shank driver 10mm Hex size shank driver www.kingtony.com
Enjoy your work

order unit : one box order unit : one blister card

1800T 1600H Hexagon head

▪ For torx internal screws ▪ 36 / 80mmL
32 / 36 / 70 mmL
1636xxH
Overall length g
KT NO. Size (mm)
1680xxH
183215T T15 32 10.0 20 / 200
183220T T20 32 10.0 20 / 200 Overall length g
KT NO.
183225T T25 32 10.0 20 / 200 mm (mm)
183227T T27 32 10.5 20 / 200 163604H H4 36 17.3 12 / 120
183230T T30 32 10.5 20 / 200 163605H H5 36 18.6 12 / 120
183240T T40 32 10.5 20 / 200 163606H H6 36 19.2 12 / 120
183245T T45 32 10.5 20 / 200 163607H H7 36 20.1 12 / 120
183250T T50 32 10.5 20 / 200 163608H H8 36 21.3 12 / 120
183620T T20 36 10.8 20 / 200 163609H H9 36 23.0 12 / 120
183625T T25 36 11.2 20 / 200 163610H H10 36 24.1 12 / 120
183627T T27 36 11.3 20 / 200 163612H H12 36 30.5 12 / 120
183630T T30 36 11.8 20 / 200 168004H H4 80 47.2 6 / 60
183635T T35 36 12.1 20 / 200 168005H H5 80 48.0 6 / 60
183640T T40 36 12.6 20 / 200 168006H H6 80 49.4 6 / 60
183645T T45 36 13.4 20 / 200 168007H H7 80 50.3 6 / 60
183650T T50 36 14.4 20 / 200 168008H H8 80 50.8 6 / 60
183655T T55 36 18.6 20 / 200 168009H H9 80 52.0 6 / 60
183660T T60 36 22.4 12 / 120 168010H H10 80 53.8 6 / 60
187015T T15 70 22.0 10 / 100 168012H H12 80 72.9 6 / 60
187020T T20 70 22.0 10 / 100
187025T T25 70 22.0 10 / 100
187027T T27 70 22.0 10 / 100
187030T T30 70 22.0 10 / 100
187040T T40 70 22.0 10 / 100
187045T T45 70 22.0 10 / 100 1600T
187050T T50 70 22.0 10 / 100 ▪ For torx head screw
▪ 36 / 80mmL
1636xxT

1680xxT

1836Z Pozidriv head

Overall length
KT NO. g
▪ 36 mmL Size (mm)
163610T T10 36 16.9 12 / 120
163615T T15 36 17.3 12 / 120
Overall length g 163620T T20 36 17.6 12 / 120
KT NO. No. (mm) 163625T T25 36 17.8 12 / 120
183602Z PZ2 36 12.4 20 / 200 163627T T27 36 18.2 12 / 120
183603Z PZ3 36 12.4 20 / 200 163630T T30 36 18.3 12 / 120
183604Z PZ4 36 13.0 20 / 200 163640T T40 36 19.9 12 / 120
163645T T45 36 20.9 12 / 120
163650T T50 36 22.9 12 / 120
163655T T55 36 28.0 12 / 120
163660T T60 36 32.6 12 / 120
168010T T10 80 46.3 6 / 60
168015T T15 80 46.5 6 / 60
168020T T20 80 46.8 6 / 60
168025T T25 80 47.1 6 / 60
168027T T27 80 47.2 6 / 60
168030T T30 80 47.2 6 / 60
168040T T40 80 48.0 6 / 60
168045T T45 80 49.1 6 / 60
168050T T50 80 50.0 6 / 60
168055T T55 80 52.3 6 / 60
168060T T60 80 70.4 6 / 60

382
Bit • Silicon chrome vanadium alloy steel (S2)
10mm H EX SH A NK B IT
No .163605M M 5x36 mm 12PC. 4 71059 1 9 672 81

• Anti-rust oiled, sand-blasted

10mm Hex size shank driver www.kingtony.com
Enjoy your work

order unit : one blister card

1600E 1600M Spline head

▪ For torx Plus head screw ▪ 36 / 80mmL
▪ 36 / 80mmL 1636xxE 1636xxM

1680xxE 1680xxM

Overall length g Overall length

KT NO. KT NO. g
Size (mm) Size (mm)
163610E IP10 36 15.4 12 / 120 163605M M5 36 18.3 12 / 120
163615E IP15 36 15.8 12 / 120 163606M M6 36 18.7 12 / 120
163620E IP20 36 15.6 12 / 120 163608M M8 36 19.8 12 / 120
163625E IP25 36 16.4 12 / 120 163609M M9 36 20.9 12 / 120
163627E IP27 36 17.4 12 / 120 163610M M10 36 22.4 12 / 120
163630E IP30 36 17.4 12 / 120 163612M M12 36 27.7 12 / 120
163640E IP40 36 18.4 12 / 120 163614M M14 36 30.0 12 / 120
163645E IP45 36 19.6 12 / 120 168005M M5 80 47.2 6 / 60
163650E IP50 36 20.6 12 / 120 168006M M6 80 47.9 6 / 60
163655E IP55 36 25.0 12 / 120 168008M M8 80 49.0 6 / 60
163660E IP60 36 31.4 12 / 120 168009M M9 80 50.5 6 / 60
168010E IP10 80 44.8 6 / 60 168010M M10 80 51.6 6 / 60
168015E IP15 80 45.2 6 / 60 168012M M12 80 70.1 6 / 60
168020E IP20 80 45.4 6 / 60 168014M M14 80 71.0 6 / 60
168025E IP25 80 46.0 6 / 60
168027E IP27 80 46.4 6 / 60
168030E IP30 80 46.6 6 / 60
168040E IP40 80 47.8 6 / 60
168045E IP45 80 49.0 6 / 60
168050E IP50 80 50.0 6 / 60
168055E
168060E
IP55
IP60
80
80
60.2
79.4
6 / 60
6 / 60
Bit Display Box
1600U 87352
▪ For torx head screw ▪ Overall size -W 318 x D 235 x H 183 mm
▪ Tamper resistant type ▪ Weight - 1.3 Kg / Cuft - 0.4
1636xxU
▪ 36 / 80mmL
1680xxU 60

Overall length g
KT NO. Size (mm) 60

163610U T10H 36 16.9 12 / 120

163615U T15H 36 17.3 12 / 120
60
163620U T20H 36 17.6 12 / 120
163625U T25H 36 17.8 12 / 120
163627U T27H 36 18.2 12 / 120 60

163630U T30H 36 18.3 12 / 120

163640U T40H 36 19.9 12 / 120 60
163645U T45H 36 20.9 12 / 120 48 48 48 48
163650U T50H 36 22.9 12 / 120
163655U T55H 36 28.0 12 / 120
163660U T60H 36 32.6 12 / 120
168010U T10H 80 46.3 6 / 60
168015U T15H 80 46.5 6 / 60
168020U T20H 80 46.8 6 / 60
168025U T25H 80 47.1 6 / 60
168027U T27H 80 47.2 6 / 60
168030U T30H 80 47.2 6 / 60
168040U T40H 80 48.0 6 / 60
168045U T45H 80 49.1 6 / 60
168050U T50H 80 50.0 6 / 60
168055U T55H 80 52.3 6 / 60
168060U T60H 80 70.4 6 / 60

383
 Bit Set
• Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted

1011MQ
Metal case size (mm) : 198 x 105 x 37 (0.027 cuft) 11
PC.
Kg 0.82 1 / 20
Contents

1636M M5, M6, M8, M10, M12

1680M M5, M6, M8, M10, M12

414810M

1015MQ 15
Metal case size (mm) : 198 x 105 x 37 (0.027 cuft) PC.

Kg 0.96 1 / 20
Contents

1636H H4, H5, H6, H7, H8, H10, H12

1680H H4, H5, H6, H7, H8, H10, H12

414810M

1015PQ 15
PC.
Metal case size (mm) : 198 x 105 x 37 (0.027 cuft)
Kg 0.96 1 / 20
Contents

1636T T20,T25, T30, T40, T45, T50, T55

1680T T20,T25, T30, T40, T45, T50, T55

414810M

1042CQ
Metal case size (mm) : 205 x 80 x 42 (0.024 cuft)
Kg 0.52 1 / 20
Contents

1025H H1.5, H2, H2.5, H3, H4, H5, H6, H7, H8, H10
42
PC.
1025T T6
T7H, T8H, T9H , T10H, T15H, T20H, T25H,
1025U
T27H, T30H, T40H
3x0.5, 3.5x0.6, 4x0.5, 4.5x0.6, 5x0.8, 5.5x0.8,
1025S
6x1.0, 6.5x1.2, 7x1.2, 8x1.2
1025P PH0, PH1, PH2, PH3
1025Z PZ1, PZ2, PZ3
1025R RB0, RB1, RB2, RB3

384
Bit Set
• Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted

1023EQ
Metal case size (mm) : 244 x 118 x 37 (0.038 cuft)
Kg
23
Contents 1.36 1 / 18 PC.

10IP, 15IP, 20IP, 25IP, 27IP, 30IP, 40IP, 45IP,

1636E
50IP, 55IP, 60IP

10IP, 15IP, 20IP, 25IP, 27IP, 30IP, 40IP, 45IP,

1680E
50IP, 55IP, 60IP

414810M

1043CQ
Metal case size (mm) : 290 x 130 x 41 (0.056 cuft)

Contents
Kg 2.5 1 / 10 43
PC.
1636H H4, H5, H6, H7, H8, H10, H12

1636M M5, M6, M8, M10, M12

1636T T20, T25, T27, T30, T40, T45, T50, T55, T60

1680H H4, H5, H6, H7, H8, H10, H12

1680M M5, M6, M8, M10, M12

1680T T20, T25, T27, T30, T40, T45, T50, T55, T60

414710M

1044CQ
Metal case size (mm) : 296 x 130 x 41 (0.056 cuft)
Contents
Kg 2.5 1 /10 44
PC.
1636H H4, H5, H6, H7, H8, H10, H12

1636M M5, M6, M8, M10, M12

1636T T20, T25, T27, T30, T40, T45, T50, T55, T60

1680H H4, H5, H6, H7, H8, H10, H12

1680M M5, M6, M8, M10, M12

1680T T20, T25, T27, T30, T40, T45, T50, T55, T60

314810M, 414810M

5169PR
Metal case size (mm) : 445 x 187 x 50 (0.147 cuft)
Kg 4.15 1 /4
Contents

E4, E5, E6, E7, E8, E10, E11, E12, E14, E16,
3375M
E18
69
PC.
T10H, T15H, T20H, T25H, T27H, T30H, T40H,
1147R
T45H, T50H
1636H H4, H5, H6, H7, H8, H10, H12
1636M M5, M6, M8, M10, M12

T10, T15, T20, T25, T27, T30, T40, T45, T50,

1636T
T55, T60

1680H H4, H5, H6, H7, H8, H10, H12

1680M M5, M6, M8, M10, M12

T10, T15, T20, T25, T27, T30, T40, T45, T50,

1680T
T55, T60

314810M 3792 3779-08G

385
 Ratchet Screwdriver Set

2166DF 1/4"
▪ Two position L-handle design for greater torque
▪ PC+TPR Handle

Forward

Lock
Overall Length Kg
KT NO. Gear (mm) Reverse
2166DF 46 teeth 167 0.28 6 / 72

32809MR
▪ 9-in-1 ratchet screwdriver set
▪ Two position L-handle design for greater torque
9
▪ Reversible ratchet with 1/4" bit holder PC.
▪ PC+TPR Handle

Kg 0.32 6 / 72
Contents

1025S 4.0, 5.0

1025P PH1, PH2 , PH3

1025Z PZ1, PZ2

750-60
2166DF

2555MR 1/4"
▪ Ratchet screwdriver set
Blow case size (mm) : 260 x 160 x 64 (0.094 cuft)
55
Kg PC.
Contents 1.0 1 / 10
1025S 3.0, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 8.0

1025P PH0, PH1, PH2, PH3

1025Z PZ0, PZ1, PZ2, PZ3

1025T T10, T15, T20, T25, T27, T30, T40

1025H H2, H2.5, H3, H4, H5, H6, H8

1025U T10, T15, T20, T25, T27, T30, T40

1025R RB1, RB2

7702-25
750-60
2166DF
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
2335M
12, 13, 14

386
Bit Set
• Silicon chrome vanadium alloy steel (S2)
• Anti-rust oiled, sand-blasted

1032CQ 1032CQ01
Plastic case size (mm) : Plastic case size (mm) :
120 x 70 x 42 (0.012 cuft) 32 120 x 70 x 42 (0.012 cuft) 33
PC. PC.

Kg 0.3 1 / 20 Kg 0.3 1 / 20
Contents Contents

1025S 3.0, 4.0, 5.0, 6.0 1025S 3.0, 4.0, 5.0, 6.0

1025P PH1, PH2 x 2, PH3 1025P PH1, PH2 x 2, PH3

1025Z PZ1, PZ2 x 2, PZ3 1025Z PZ1, PZ2 x 2, PZ3

1025T T10, T15, T20, T25, T27, T30, T40 1025T T10, T15, T20, T25, T27, T30, T40

1025H H3, H4, H5, H6 1025H H3, H4, H5, H6

T10H, T15H, T20H, T25H, T27H, T10H, T15H, T20H, T25H, T27H,
1025U 1025U
T30H, T40H T30H, T40H

7702-25 1025R RB2

753-63 7702-25

753-63

1050CQ 2517MR 1/4"

Blow case size (mm) : Plastic case size (mm) :
50 17
224 x 110 x 54 (0.047 cuft) PC. 120 x 70 x 32 (0.009 cuft) PC.

Kg 0.29 1 / 20 Kg 0.22 1 / 28
Contents Contents

1025S 4.0 x 2, 5.5 x 2, 6.5 x 2 1025S 4.0, 5.5, 6.5

1025P PH1 x 2, PH2 x 2, PH3 x 2 1025P PH1, PH2, PH3

1025Z PZ1 x 2, PZ2 x 2, PZ3 x 2 1025T T10, T15, T20

T6, T7, T8, T9, T10, T15, T20, T25 2335M 4, 4.5, 5, 5.5, 6, 7mm
1025T
T27, T30, T40 x 2
7702-25
1025H H2, H3, H4, H5, H6, H7, H8
753-63
T7H, T8H, T9H, T10H, T15H, T20H,
1025U
T25H, T27H, T30H, T40H x 2

750-60

2141

387
 Power Bit Pocket Case

PAT.

• Shockproof high quality

materials

• Functional design free slide • Flexible for different

open pocket storage case. length of power bit

▪ 150mm

▪ 110mm
▪ 100mm
▪ 90mm
▪ 75mm
▪ 65mm
▪ 55mm
▪ 50mm
▪ 45mm

388
Power Driving 7111H Hexagon head
• Silicon chrome vanadium alloy steel (S2)
▪ DIN ISO 2351-3
• Anti-rust oiled, phosphate sunk
• Magnetic 1/4" Hex size shank driver Overall length g
KT NO.
order unit : one blister card mm (mm)

7100P Phillips head 711102H

711125H
H2
H2.5
110
110
11
11
10 / 100
10 / 100
▪ Short neck (9.5 mm) type 711103H H3 110 14 10 / 100
▪ DIN ISO 2351-2 711104H H4 110 18 10 / 100
711105H H5 110 24 10 / 100
Overall length 711106H H6 110 29 10 / 100
KT NO. g
No. (mm) 711107H H7 110 34 10 / 100
715000P PH0 50 8 711108H H8 110 42 10 / 80
715001P PH1 50 9 711110H H10 110 62 10 / 80
715002P PH2 50 11
715003P PH3 50 11
715004P PH4 50 14
716502P
717001P
PH2
PH1
65
70
15
16
7100T
717002P PH2 70 17 ▪ For torx head screw
10 / 100
717003P PH3 70 17 ▪ 50 / 70 / 110 / 150mmL
719001P PH1 90 18
719002P PH2 90 20 715050T
719003P PH3 90 20
711002P PH2 100 24 Overall length g
KT NO.
711501P PH1 150 23 Size (mm)
711502P PH2 150 33 715006T T6 50 5
711503P PH3 150 33 715007T T7 50 5
715008T T8 50 5
715009T T9 50 5
7150S Slotted head 715010T
715015T
T10
T15
50
50
6
6
▪ DIN ISO 2351-1 715020T T20 50 7
715025T T25 50 8
Tip Tip Overall 715027T T27 50 9
KT NO. width thickness length g 715030T T30 50 9
(mm) (mm) (mm)
715040T T40 50 10
715003S1 3.0 0.5 50 6 715050T T50 50 15
715035S1 3.5 0.5 50 6 717006T T6 70 7
715004S2 4.0 0.5 50 7 717007T T7 70 7
715004S1 4.0 0.8 50 7 717008T T8 70 7
715045S1 4.5 0.6 50 7 717009T T9 70 7
10 / 100 717010T T10 70 8
715005S1 5.0 0.8 50 8
717015T T15 70 8
715055S1 5.5 0.8 50 8 717020T T20 70 10
715055S2 5.5 1.0 50 8 717025T T25 70 11
715006S1 6.0 1.0 50 8 717027T T27 70 14 10 / 100
715065S1 6.5 1.2 50 9 717030T T30 70 14
717040T T40 70 15
711110T T10 110 14
711115T T15 110 14
7150H 7115H Hexagon head 711120T T20 110 18
▪ DIN ISO 2351-3 711125T T25 110 19
711127T T27 110 24
Overall length 711130T T30 110 24
KT NO. g
mm (mm) 711140T T40 110 28
711506T T6 150 16
715002H H2 50 6
711507T T7 150 16
715025H H2.5 50 6
711508T T8 150 16
715003H H3 50 6
711509T T9 150 16
715004H H4 50 9 711510T T10 150 17
715005H H5 50 10 711515T T15 150 18
10 / 100
715006H H6 50 11 711520T T20 150 24
715007H H7 50 13 711525T T25 150 24
715008H H8 50 17 711527T T27 150 32
711505H H5 150 34 711530T T30 150 33
711507H H7 150 47 711540T T40 150 39

389
 Power Driving 2128PR
• Silicon chrome vanadium alloy steel (S2) ▪ torx head tamper &
• Anti-rust oiled, phosphate sunk L-type holder set
7
PC.
• Magnetic
1/4" Hex size shank driver

order unit : one blister card Kg

Contents 0.17 10 / 60
7100Z Pozidriv head
T10H, T15H, T20H, T25H, T27H,
▪ DIN ISO 2351-2 7170U
T30H, T40H
158902ERA
Overall length g
KT NO. No. (mm)
715001Z PZ1 50 9 2138PR
715002Z PZ2 50 11 ▪ Hexagon head power
715003Z PZ3 50 12 bits & L-type holder set
7
717001Z PZ1 70 11 PC.
717002Z PZ2 70 15 10 / 100
717003Z PZ3 70 15 Kg
Contents 0.24 10 / 60
719001Z PZ1 90 13
719002Z PZ2 90 19 7150H H2, H3, H4, H5, H6, H7, H8
719003Z PZ3 90 19
158902ERA
7100U
▪ For torx head screw
▪ 50 / 70 / 110mmL 13
9

Overall length g
KT NO. Size (mm) 7400P Double phillips head
715006U T6H 50 7 ▪ Short head type
715007U T7H 50 5
9
715008U T8H 50 5
715009U T9H 50 5 Overall length g
KT NO.
715010U T10H 50 7 No. (mm)
715015U T15H 50 7 745002P PH2 50 11
715020U T20H 50 7 747501P PH1 75 16
715025U T25H 50 8 747502P PH2 75 15
715027U T27H 50 9 747503P PH3 75 16
715030U T30H 50 9 10 / 100
741002P PH2 100 23
715040U T40H 50 11 741502P PH2 150 37
717010U T10H 70 8 742002P PH2 200 50
717015U T15H 70 8 10 / 100 743002P PH2 300 70
717020U T20H 70 10
717025U T25H 70 11
717027U T27H 70 13 7300P Double phillips head
717030U T30H 70 13 ▪ Long head type
717040U T40H 70 15 13
711110U T10H 110 14
711115U T15H 110 14 Overall length g
KT NO.
711120U T20H 110 18 No. (mm)
711125U T25H 110 19 734501P PH1 45 9
711127U T27H 110 24 734502P PH2 45 9
711130U T30H 110 24 734503P PH3 45 10
711140U T40H 110 28 736501P PH1 65 14
736502P PH2 65 14
7150R Square head 736503P PH3 65 14 10 / 100
731101P PH1 110 26
731102P PH2 110 26
731103P PH3 110 26
Overall length g 731502P PH2 150 32
KT NO. Size (mm)
731503P PH3 150 33
715000R RB0 50 7
715001R RB1 50 8 5mm Hex size shank driver order unit : one box
10 / 100
072 6502 P 10PC.
N O .726502P

715002R RB2 50 8
5 mm H EX SH A NK PO W ER B IT
No .2 x 65 mm 10PC. 4 712755 335646

715003R RB3 50 8 Insert Size: The suggested size is

according to the depth of bit
holder which a bit is inserted.
7170R Square head
www.kingtony.com
Enjoy your work

7200P Double phillips head

▪ Long head typed
Overall length g 13
KT NO. Size (mm) Overall length
KT NO. g
717000R 0 70 9 No. (mm)
717001R 1 70 11 726502P PH2 65 8
10 / 100
717002R 2 70 13 727502P PH2 75 10 10 / 100
717003R 3 70 13 721102P PH2 110 14

390
Power Driving Power Driving
• Silicon chrome vanadium alloy steel (S2) • Silicon chrome vanadium alloy steel (S2) N O .726502P
5 mm H EX SH A NK PO W ER B IT
072 6502 P 10PC.

• Nickel plated • Anti-rust oiled, phosphate sunk

No .2 x 65 mm 10PC. 4 712755 335646

• Magnetic • Magnetic
1/4" Hex size shank driver
1/4" Hex size shank driver order unit : one box
www.kingtony.com
Enjoy your work

order unit : one box

1300P Double phillips head 13

Insert size: The suggested size is
according to the depth of bit
▪ Long head type holder which a bit is inserted.
13

13
13A6502P Double phillips head
Overall length g ▪ Long head type
KT NO. No. (mm)
▪ For ironwork screws
134501P PH1 45 8 10 / 300 13
134502P PH2 45 9 10 / 300 Overall length
KT NO. g
134503P PH3 45 9 10 / 300 No. (mm)
136501P PH1 65 14 10 / 200 13A6502P PH2 65 8 10 / 100
136502P PH2 65 14 10 / 200
136503P PH3 65 14 10 / 200
131101P PH1 110 26 10 / 150 13B6502P Double phillips head
131102P PH2 110 26 10 / 150 ▪ Long head type
131103P PH3 110 26 10 / 150 ▪ For woodwork screws
131501P PH1 150 36 10 / 100 13

131502P PH2 150 36 10 / 100 Overall length g

KT NO.
131503P PH3 150 37 10 / 100 No. (mm)
13B6502P PH2 65 8 10 / 100

1500P Double phillips head

▪ Short head type
Power Driving
9
• Chrome vanadium & stainless alloy steel
Overall length g • Anti-rust oiled , sand-blasted
KT NO.
07606508S.E1_01 6PC.
NUT SETTER 6PC. DIN3126

No. (mm)
NO.7606508S 1/4”x65 mm
4 712755 349278

• Magnetic
155001P PH1 50 10 10 / 300
155002P PH2 50 10 10 / 300
1/4" Hex size shank driver www.kingtony.com
Enjoy your work

155003P PH3 50 10 10 / 300

157501P PH1 75 16 10 / 200 750 750-50A
157502P PH2 75 16 10 / 200
▪ Magnetic bit holder
157503P PH3 75 17 10 / 200
151001P PH1 100 23 10 / 150
▪ 2 PC. type
750-60
151002P PH2 100 23 10 / 150 ▪ 750-50A: with spring clip
151003P PH3 100 23 10 / 150 ▪ DIN 7427
750-50A
151501P PH1 150 36 10 / 100
151502P PH2 150 37 10 / 100 Overall length g
KT NO.
151503P PH3 150 37 10 / 100 inch (mm)
750-60 1/4 60 20 6 / 84
750-75 1/4 75 30 20 / 400
750-100 1/4 100 37 20 / 400
7300P Phillips / Slotted head 750-150 1/4 150 50 20 / 240
▪ Long head type 750-50A 1/4 50 22 6 / 84

Tip
13
751
Tip Overall
KT NO. width thickness length
No. (mm) g ▪ Magnetic bit holder
(mm) (mm)
▪ 1 PC. type
734551P PH1 5.0 0.8 45 8 10 / 300 ▪ With spring clip
734552P PH2 5.0 0.8 45 8 10 / 300
▪ DIN 7427
736552P PH2 5.0 0.8 65 13 10 / 200
731152P PH2 5.0 0.8 110 25 10 / 150 Overall length g
KT NO.
731552P PH2 5.0 0.8 150 36 10 / 100 inch (mm)
751-60 1/4 60 24 6 / 84
751-75 1/4 75 36 6 / 84

391
 Power Driving
• Chrome vanadium & stainless alloy steel
• Anti-rust oiled , sand-blasted 1/4" Hex size shank driver
• Magnetic

752 754
▪ Magnetic bit holder ▪ Universal joint bit holder
▪ 2 PC. type ▪ 20 degree pivot mode allows
▪ With quick-release sleeve for limited space accessibility
▪ DIN 7427 ▪ Can be used in straight or
pivot mode
Overall length g
KT NO. inch (mm)
752-60 1/4 63 33 6 / 72
752-75 1/4 75 32 30 / 600
752-100 1/4 100 38 20 / 400 Overall Length g
KT NO. inch (mm)
752-150 1/4 150 52 20 / 240
752-300 1/4 300 92 20 / 160 754-90 1/4 90 52 20 / 400

753 755
▪ 753-63 ▪ Quick release flexible bit holder
-Magnetic bit holder ▪ Flexible shaft driver
-2 PC. type ▪ The flex shaft accepts any standard hex fitting
-With quick-release sleeve ▪ Quick release fits double end power bits and
-For 1025 bit 50mm power bits
-DIN 7427

753-63
Overall length g
KT NO. inch (mm)
753-63 1/4 63 33 6 / 72

Quick release Removable magnetic tip

Fits double end power bits

▪ 753-370 and 50mm power bits
-Quick release bit holder
-Extra-long extended driver for limited space
-Magnetic bit holder
-For power bits

753-370

Overall length g
KT NO. inch (mm)
753-370 1/4 370 170 4 / 48

Overall length g
KT NO. inch (mm)
755-300 1/4 300 293 2 / 40
755-400 1/4 400 385 2 / 40

392
Angle Driver Power Driving
• The body is zin alloy steel • Chrome vanadium alloy steel NUT SETTER 6PC. DIN3126
07606508S.E1_01 6PC.

• Anti-rust oiled , sand-blasted

NO.7606508S 1/4”x65 mm

• The arm is chrome vanadium alloy steel

4 712755 349278

• The chuck is aluminum alloy steel

• Magnetic 1/4" Hex size shank driver
1/4" Hex size shank driver
www.kingtony.com
Enjoy your work

759 75A1
▪ Heavy duty right angle bit holder ▪ Threaded rod socket
▪ This heavy duty 90 degree offset driver with 24 ▪ Fastest tool available to tighten or loosen
position gripped stabilizer arm is designed for use threaded rods
with power drivers 18-24 Volts ▪ Automatic locking cams
▪ It’s head is shorter than 2.5" which is suitable to ▪ Will not damage the threads when used properly
use in limited space
▪ Locking magnetic chuck accepts any 1/4" hex
drive accessory such as twist drills, spade drills,
step drills, grinding stones, buffer pads, nut drivers

ØD
and screwdriver bits 9.5
L
▪ Durable all metal housing and steel gears with
ball bearing construction
▪ Gripped stabilizer arm with 1 screwdriver bit
KT NO. Size D L Capacity g
storage mm inch mm mm Ø mm
▪ It’s amazing capacity for up to 500 inch lbs with 75A105M 5 3/16 22 66 4.6~5.0 60 10 / 200
2000 RPM 75A106M 6 1/4 24 66 5.6~6.35 75 10 / 200
75A108M 8 5/16 24 66 7.6~8.0 74 10 / 200
75A110M 10 3/8 28 66 9.0~10.0 99 10 / 160
75A112M 12 1/2 28 66 11.4~12.7 98 10 / 160
75A114M 14 9/16 32 66 13.2~14.3 126 10 / 160
75A116M 16 5/8 32 66 15.2~16.0 125 10 / 160

Chuck accepts 760M 760S

any 1/4" hex drive
▪ Nut setter
▪ Non magnetic type
Gripped stabilizer
▪ DIN 3126
arm with 1
screwdriver bit
storage.

Overall length g
KT NO. mm (mm)
7606512M 12 65 50 6 / 72
7607510M 10 75 38 6 / 72
Overall length g
KT NO. mm (mm)
7601012M 12 100 61 20 / 240

Overall length g
KT NO. inch (mm)
90°
7606508S 1/4 65 20 6 / 84
7606510S 5/16 65 30 6 / 84
Pressure to change angle 24 position gripped 7606512S 3/8 65 36 6 / 72
stabilizer arm design

Overall length g
KT NO. inch (mm)
759-140 1/4 140 305 12 / 48

393
 Power Driving 76B
▪ Deep well nut setter
• Chrome vanadium alloy steel NUT SETTER 6PC. DIN3126
NO.7606508S 1/4”x65 mm
07606508S.E1_01

4 712755 349278
6PC.

▪ Deep hole for bolt & nut

• Anti-rust oiled , sand-blasted ▪ Press-fitted high-durability shank
1/4" Hex size shank driver www.kingtony.com
▪ Use for tightening step clamp in construction
Enjoy your work

761M 761S 35

▪ Nut setter

ØD1
Ød
▪ Magnetic type 9.5
ℓ
▪ DIN 3126 L

KT NO. Overall length g D1 ℓ d L g

mm (mm) KT NO. mm mm mm mm mm
7616505M 5 65 27 6 / 84 76B808M 8 12.7 6 6 80 41 15 / 300
7616506M 6 65 26 6 / 84 76B809M 9 13.2 6 7 80 40 15 / 300
7616507M 7 65 25 6 / 84 76B810M 10 14.5 7 7 80 47 12 / 240
7616508M 8 65 30 6 / 84 76B811M 11 15.8 7 9 80 52 12 / 240
7616510M 10 65 37 6 / 72 76B812M 12 16.8 8 9 80 57 12 / 240
7616512M 12 65 52 6 / 72 76B813M 13 17.8 9 10 80 62 12 / 240
7616513M 13 65 54 6 / 72 76B814M 14 19.7 9 12 80 70 12 / 240
7616514M 14 65 52 6 / 20 76B815M 15 20.8 10 12 80 77 12 / 240
Overall length g 76B816M 16 21.8 10 14 80 76 12 / 240
KT NO. mm (mm) 76B817M 17 23.8 11 14 80 95 12 / 144
7611006M 6 100 38 5 / 25 76B819M 19 25.8 13 15 80 112 10 / 120
7611008M 8 100 48 5 / 25 76B821M 21 27.8 13 19 80 113 10 / 120
7611010M 10 100 54 5 / 25 76B822M 22 29.8 13 19 80 137 10 / 120
7611012M 12 100 68 5 / 25 76B824M 24 31.8 13 21 80 146 6 / 72
7611013M 13 100 71 5 / 25
7611014M 14 100 77 5 / 25
7611506M 6 150 58 5 / 25 NUT SETTER 6PC. DIN3126
07606508S.E1_01 6PC.

7611507M 7 150 65 5 / 25
NO.7606508S 1/4”x65 mm
4 712755 349278

7611508M 8 150 67 5 / 25
7611510M 10 150 68 5 / 25 1/4" & 3/8" & 1/2" Hex size shank driver
7611512M 12 150 103 5 / 25
www.kingtony.com
Enjoy your work

7611513M 13 150 110 5 / 25

7611514M 14 150 115 5 / 25 770
7612006M 6 200 78 1 / 20 ▪ Socket adapter
7702-25
7612008M 8 200 93 1 / 20 ▪ Ball retainer type
7612010M 10 200 89 1 / 20 ▪ DIN 7428
7702-50
7612012M 12 200 128 1 / 20 7703-50
7612014M 14 200 128 1 / 20
7702-75
Overall length
KT NO. g
inch (mm)
7614208S 1/4 42 15 6 / 84 7704-50
7614210S 5/16 42 17 6 / 84 9.5
7614512S 3/8 45 22 6 / 84
Overall length
7616508S 1/4 65 30 6 / 84 KT NO. g
Size (mm)
7616510S 5/16 65 31 6 / 84
7616512S 3/8 65 37 6 / 72 7702-25 1/4" 25 6 20 / 200
7616514S 7/16 65 39 6 / 72 7702-50 1/4" 50 13 10 / 100
7702-75 1/4" 75 23 10 / 100
7703-50 3/8" 50 23 6 / 84
7704-50 1/2" 50 24 6 / 72

771
▪ Socket adapter
▪ Pin retainer type
▪ DIN 7428
Overall length
KT NO. g
Size (mm)
7712-02 1/4" 50 12 10 / 100
7712-03 1/4" 75 33 10 / 100
7713-02 3/8" 50 23 6 / 84

394
Power Driving
• Chrome vanadium alloy steel 07606508S.E1_01 6PC.

• Anti-rust oiled , sand-blasted

NUT SETTER 6PC. DIN3126
NO.7606508S 1/4”x65 mm
4 712755 349278

1/4" & 3/8" & 1/2" Hex size shank driver

www.kingtony.com
Enjoy your work

774 775
▪ Bit adapter ▪ Universal joint socket
▪ Wobble function provides up to 15° accessibility adapter
▪ Universal joint
function provides up

15 °
to 30° accessibility

9.5 D
9.5

30
L

°
77.4
L
KT NO. g
Size mm D L
KT NO. g
7743-56 3/8" 56 30 6 / 72 Size mm mm
7744-60 1/2" 60 42 6 / 72 7753-78 3/8" 25 77.4 90 6 / 120
7754-85 1/2" 29 84.5 127 6 / 96

Titanium Coated HSS Drill Bit Set

11101SQ 1/4"
▪ Titanium coated HSS drill set with standard 1/4" Ø Overall length
hex shank that will fit cordless screwdrivers, hand mm mm 10
drills and impact drivers etc. or use in standard 1.5 62 PC.
drill chuck 2 69
▪ Suitable for use with steel, wood, plastic etc 2.5 76.5
▪ Titanium nitride drill bits run cooler, drill smoother 3 81.5
and last longer than standard bits 3.2 85
▪ High speed steel 3.5 90
▪ 120 deg. tips 4 95
▪ 1/4" hex shank for fast changes 4.5 100
4.8 105
5 106

395
 Hex Key • Material - SNCM - V alloy steel
• Finishing - chrome plated KT No. & D1

1145MR 1145SR
▪ Standard arm type
▪ Allen head
▪ DIN ISO 2936

KT NO. g KT NO. g
mm mm mm inch mm mm
114515MR H1.5 15.5 46.5 0.9 20 / 400 114502SR 1/16 18.25 48.83 1 20 / 400
114502MR H2 18.0 52.0 1 20 / 400 114525SR 5/64 19.84 51.98 1 20 / 400
114525MR H2.5 20.5 58.5 3 20 / 400 114503SR 3/32 21.43 55.57 3 20 / 400
114503MR H3 23.5 66.0 5 20 / 400 114504SR 1/8 24.62 62.72 5 20 / 400
114504MR H4 29.5 74.0 10 20 / 400 114505SR 5/32 27.80 69.86 9 20 / 400
114505MR H5 33.0 85.0 18 20 / 400 114506SR 3/16 30.95 77.00 15 20 / 400
114555MR H5.5 35.5 90.5 24 10 / 200 114508SR 1/4 37.31 91.29 30 10 / 200
114506MR H6 38.0 96.5 30 10 / 200 114510SR 5/16 42.08 105.58 56 10 / 200
114507MR H7 41.0 102 45 10 / 200 114512SR 3/8 46.84 119.87 80 10 / 120
114508MR H8 44.0 108 60 10 / 200 114516SR 1/2 53.70 145.70 196 10 / 120
114510MR H10 50.0 122 105 10 / 200 114518SR 9/16 58.79 160.29 267 6 / 72
114520SR 5/8 63.88 174.88 361 6 / 72
114524SR 3/4 73.05 203.05 599 6 / 24

1125MR 1125SR
▪ Extra long arm type
▪ Allen head
▪ DIN ISO 2936

KT NO. g KT NO. g
mm mm mm inch mm mm
112515MR H1.5 15.5 91.5 1 20 / 400 112502SR 1/16 15.5 91.5 1 20 / 400
112502MR H2 18.0 102 3 20 / 400 112525SR 5/64 18 102 3 20 / 400
112525MR H2.5 20.5 114.5 5 20 / 400 112503SR 3/32 21 114.5 5 20 / 400
112503MR H3 23.0 129 8 20 / 480 112504SR 1/8 23 129 8 20 / 400
112504MR H4 29.0 144 18 20 / 300 112505SR 5/32 29 144 18 20 / 300
112505MR H5 33.0 165 31 20 / 300 112506SR 3/16 33 165 31 20 / 300
112506MR H6 38.0 186 51 20 / 400 112508SR 1/4 38 186 51 10 / 100
112507MR H7 41.0 197 78 20 / 240 112510SR 5/16 44 208 104 10 / 100
112508MR H8 44.0 208 104 10 / 100 112512SR 3/8 50 234 182 10 / 100
112510MR H10 50.0 234 182 10 / 100 112516SR 1/2 57 262 290 8 / 48
112512MR H12 57.0 262 290 8 / 48 112518SR 9/16 70 294 451 8 / 48
112514MR H14 70.0 294 451 8 / 48
112517MR H17 80.0 337 770 4 / 32
112519MR H19 89.0 380 863 4 / 16
112522MR H22 102.0 422 1590 4 / 16

396
Hex Key Set
• Material - SNCM - V alloy steel
• Finishing - chrome plated

20218MR
Spec. Contents
Kg 0.33 12 / 72 8 9 9
PC. PC. PC.
knife type H2, H2.5, H3, H4, H5, H6, H8, H10

20219MR
Kg 0.33 6 / 48
Spec. Contents
Standard H1.5, H2, H2.5, H3, H4, H5, H6,
arm 1145MR H8, H10
20218MR 20219MR 20219SR

20219SR
Kg 0.33 6 / 48
Spec. Contents
9
Standard 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, PC.
arm 1145SR 1/4, 5/16, 3/8
8 9
PC. PC.

20208MR
Kg 0.43 8 / 48
Spec. Contents
Extra long H2, H2.5, H3, H4, H5, H6, H8,
arm 1125MR H10

20209MR
Kg 0.49 8 / 48
Spec. Contents
Extra long H1.5, H2, H2.5, H3, H4, H5, H6,
arm 1125MR H8, H10 20208MR 20209MR 20209SR02

20209SR02
Kg 0.47 8 / 48
Spec. Contents
Extra long 1/16, 5/64, 3/32, 1/8, 5/32, 3/16,
arm 1125MR 1/4, 5/16, 3/8

20208MR01 20208SR01
KT NO. Spec. Contents
Kg 1.25 1 / 20 8
PC.
H3, H4, H5, H6, H8, H10,
20208MR01
Extra long 1125MR H12, H14 Enjoy your work

arm 1/8, 5/32, 3/16, 1/4, 5/16,

20208SR01
1125SR 3/8, 1/2, 9/16

20210MR
10
PC.

Kg 0.47 1/6
Spec. Contents

Extra long H3, H4, H5, H6, H7, H8, H10,

arm 1125MR H12, H14, H17

397
 Spline L- wrench & Set • Material - SNCM - V alloy steel
• Finishing - chrome plated KT No. & D1

1146MR
▪ Standard arm type
▪ For spline head screw

KT NO. g
Size mm mm
114605MR M5 29 83 15 20 / 320
114606MR M6 33 90 24 20 / 320
114608MR M8 39 98 47 10 / 300
114610MR M10 44 111 83 10 / 200
114612MR M12 53 126 127 10 / 180

1126MR
▪ Extra long arm type
▪ For spline head screw

KT NO. g
Size mm mm
112605MR M5 33 165 28 20 / 300
112606MR M6 38 186 46 20 / 300
112608MR M8 44 208 90 10 / 100
112610MR M10 50 234 159 10 / 100
112612MR M12 53 264 237 10 / 80

20505PR01 20515PR01
5
PC.

Kg 0.333 6 / 54
KT NO. Spec. Contents

Standard
20505PR01 M5, M6, M8, M10, M12
arm type 1146MR

Kg 0.632 4 / 32
KT NO. Spec. Contents

Extra long
20515PR01 M5, M6, M8, M10, M12
arm type 1126MR
20505PR01 20515PR01

398
Ball Hex Key • Material - SNCM - V alloy steel
• Finishing - chrome plated KT No. & D1

1130MR 1130SR
▪ Long arm with ball point type
▪ DIN ISO 2936

KT NO. g KT NO. g
mm mm mm inch mm mm
113015MR H1.5 15.5 63.5 1 20 / 400 113002SR 1/16 15.5 78.5 1 20 / 400
113002MR H2 18.0 77.0 2 20 / 400 113025SR 5/64 18.0 85.0 4 20 / 400
113025MR H2.5 20.5 87.5 4 20 / 400 113003SR 3/32 20.5 87.5 3 20 / 400
113003MR H3 23.0 93.0 7 20 / 400 113004SR 1/8 23.0 93.0 7 20 / 400
113004MR H4 29.0 104 14 20 / 400 113005SR 5/32 29.0 104 14 20 / 400
113005MR H5 33.0 120 25 20 / 300 113006SR 3/16 33.0 120 24 20 / 300
113006MR H6 38.0 141 41 10 / 160 113007SR 7/32 35.5 130 33 10 / 150
113008MR H8 44.0 158 84 10 / 150 113008SR 1/4 38.0 141 44 10 / 150
113010MR H10 50.0 180 145 10 / 150 113010SR 5/16 44.0 158 82 10 / 150
113012SR 3/8 50.0 180 138 10 / 150

1120MR
▪ Extra long arm with ball point type
▪ DIN ISO 2936

KT NO. g
mm mm mm
112015MR H1.5 15.5 91.5 1 20 / 400
112002MR H2 18.0 102 3 20 / 400
112025MR H2.5 20.5 114.5 5 20 / 400
112003MR H3 23.0 129 8 20 / 480
112004MR H4 29.0 144 18 20 / 300
112005MR H5 33.0 165 31 20 / 300
112006MR H6 38.0 186 51 20 / 400
112007MR H7 41.0 197 78 20 / 400
112008MR H8 44.0 208 104 10 / 100
112010MR H10 50.0 234 182 10 / 100

399
 Ball Hex Key Set
20107MR01
Kg 0.37 10 / 60
Spec. Contents 7 7 8
H2.5, H3, H4, H5, H6, H8, PC. PC. PC.
Long arm / ball
1130MR H10

20107SR
Kg 0.36 10 / 60
Spec. Contents

3/32, 1/8, 5/32, 3/16, 1/4,

Long arm / ball
1130SR 5/16, 3/8

20108MR
Kg 0.43 8 / 48
Spec. Contents 20107MR01 20107SR 20108MR
Extra long arm / H2, H2.5, H3, H4, H5, H6,
ball 1120MR H8, H10

20109MR 9 9 9
Kg PC. PC. PC.
Spec. Contents 0.49 8 / 48

Extra long arm / H1.5, H2, H2.5, H3, H4, H5,

ball 1120MR H6, H8, H10

20110MR
Kg 0.39 6 / 60
Spec. Contents

H1.5, H2, H2.5, H3, H4, H5,

Long arm / ball
1130MR H6, H8, H10

20129SR 20109MR 20110MR 20129SR

Kg 0.39 6 / 60
Spec. Contents

1/16, 5/64, 3/32, 1/8, 5/32,

Long arm / ball
1130SR 3/16, 1/4, 5/16, 3/8

400
Star L- wrench
• Material - SNCM - V alloy steel
• Finishing - chrome plated KT No. & D1

1143R
▪ Standard arm type
▪ For torx head screw
KT NO. g
Size mm mm
114310R T10 19 49 3 20 / 400
114315R T15 19.5 56.5 5 20 / 400
114320R T20 23 62 8 20 / 400
114325R T25 24.5 69.5 11 20 / 400
114327R T27 29 77 15 20 / 400
114330R T30 35 86 24 10 / 200
114340R T40 42 97 39 10 / 200
114345R T45 47 110 57 10 / 200
114350R T50 50 124 80 10 / 200

1147R
▪ Standard arm type
▪ Tamper resistant type
▪ For torx head screw
KT NO. g
Size mm mm
114710R T10H 18 50.0 3 20 / 400
114715R T15H 20 55.5 5 20 / 400
114720R T20H 24 61.5 8 20 / 400
114725R T25H 26 67.5 11 20 / 400
114727R T27H 30 75.5 15 20 / 400
114730R T30H 36 85.5 24 10 / 200
114740R T40H 41 96.5 39 10 / 200
114745R T45H 46 107 57 10 / 200
114750R T50H 52 122 80 10 / 200

1123R
▪ Extra long arm type
▪ For torx head screw

KT NO. g
Size mm mm
112310R T10 18 91.5 5 20 / 400
112315R T15 20 103 8 20 / 400
112320R T20 22 115 12 20 / 400
112325R T25 25 130 18 20 / 300
112327R T27 29 145.5 25 20 / 300
112330R T30 35 165 42 20 / 300
112340R T40 40 182 63 10 / 100
112345R T45 45 202 92 10 / 100
112350R T50 49 225 130 10 / 100

1127R
▪ Extra long arm type
▪ Tamper resistant type
▪ For torx head screw
KT NO. g
Size mm mm
112710R T10H 18 91.5 5 20 / 400
112715R T15H 20 103 8 20 / 400
112720R T20H 22 115 12 20 / 400
112725R T25H 25 130 17 20 / 300
112727R T27H 29 145.5 24 20 / 300
112730R T30H 35 165 40 20 / 300
112740R T40H 40 182 61 10 / 100
112745R T45H 45 202 89 10 / 100
112750R T50H 49 225 126 10 / 100

401
 Star L- wrench Set
• Material - SNCM - V alloy steel
• Finishing - chrome plated

20307PR 7 7
PC.
Kg
PC.
Spec. Contents 0.13 15 / 120

Standard arm T10, T15, T20, T25, T27, T30, T40

1143R

20407PR
Kg 20307PR 20407PR
Spec. Contents 0.13 15 / 120

Standard arm / T10H, T15H, T20H, T25H, T27H,

Tamper resistant 1147R T30H, T40H
8 8
PC. PC.
20308PR
Kg 0.20 12 / 72
Spec. Contents
knife type T9, T10, T15, T20, T25, T27, T30, T40
20308PR 20318PR
20318PR
Kg 0.20 12 / 72
Spec. Contents

knife type
T9H, T10H, T15H, T20H, T25H, T27H, 9
T30H, T40H PC.

20309PR
Spec. Contents
Kg 0.3 6 / 48 9
PC.
T10, T15, T20, T25, T27, T30, T40,
Standard arm
1143R T45, T50

20319PR
Kg 0.45 8 / 48 20309PR / 20409PR 20319PR / 20419PR
Spec. Contents
T10, T15, T20, T25, T27, T30, T40,
Extra long arm
1123R T45, T50

20409PR 20419PR
Kg 0.34 6 / 48 Kg 0.47 8 / 48
Spec. Contents Spec. Contents

Standard arm / T10H, T15H, T20H, T25H, T27H, Extra long arm / T10H, T15H, T20H, T25H, T27H,
Tamper resistant 1147R T30H, T40H, T45H, T50H Tamper resistant 1127R T30H, T40H, T45H, T50H

Paper Display Stand for Hex Key Wrench Set

87119
▪ Capacity : 12 sets
▪ For Allen, Spline, Ball, torx with hole, ex:
(1) 20309PR, 20409PR
(2) 20108MR, 20109MR, 20319PR, 20419PR, 20208MR, 20209MR
(3) 20107MR01, 20107SR, 20219MR,20307PR, 20407PR, 20308PR
(4) 20218MR, 20505PR, 20515PR
▪ Size: 393 x 154 x 345 mm
▪ 0.47g / CUFT 49.4

4 3 2

402
Bicycle Repair Tool
20A16MR
▪ 16-in-1 bicycle repair tool set
Kg
Contents 0.27 10 / 60
H2, H2.5, H3, H4, H5, H6
8, 9, 10 mm
PH2
5.0
Spoke Wrench: 14GE
Extension bar 1/4" DR
Wrench : 8 / 10 / 15 mm

20A17MR
▪ 20-in-1 bicycle repair tool set
Kg
Contents 0.28 10 / 60
H2, H2.5, H3, H4, H5, H6
9, 10, 12, 13, 15
PH2
5.0
Socket : 8mm
Spoke Wrench: 14GE / 15GE / 0.136"
Chain Wrench x 1
Tire Lever x 2

Aluminum Folding Hex Key Wrench Set

20317MR
▪ 7-in-1 aluminum folding hex key wrench set

Kg
Spec Contents 0.09 10 / 200
knife
H1.5, H2, H2.5, H3, H4, H5, H6
type

Aluminum Folding Tool Set

20306PR
▪ 6-in-1 aluminum folding tool set

Kg
Spec Contents 0.11 12 / 72

H3, H4, H5, H6

knife
PH2
type
5.0

403
 L- type Wrench
• Material - SNCM - V alloy steel
• Finishing - chrome plated with black tip
KT No. & D1

1160MR
▪ Hexagon with ball point head

KT NO. g
mm mm mm
116002MR H2 95 145 19 10 / 200
116025MR H2.5 95 145 21 10 / 200
116003MR H3 95 145 25 10 / 200
116004MR H4 95 145 32 10 / 200
116005MR H5 150 215 74 10 / 200
116006MR H6 150 215 92 10 / 200
116007MR H7 150 215 120 10 / 200
116008MR H8 200 280 212 10 / 80
116010MR H10 200 280 289 10 / 80

1163R
▪ For torx internal screw
▪ Tamper resistant type

KT NO. g
Size mm mm
116310R T10H 95 145 24 10 / 200
116315R T15H 95 145 27 10 / 200
116320R T20H 95 145 31 10 / 200
116325R T25H 95 145 35 10 / 200
116327R T27H 150 215 69 10 / 200
116330R T30H 150 215 86 10 / 200
116340R T40H 150 215 105 10 / 200
116345R T45H 200 280 181 10 / 80
116350R T50H 200 280 214 10 / 80

1165MR
▪ For hexagon head screw

KT NO. g
mm mm mm
116502MR H2 95 145 19 10 / 200
116525MR H2.5 95 145 21 10 / 200
116503MR H3 95 145 25 10 / 200
116504MR H4 95 145 32 10 / 200
116505MR H5 150 215 74 10 / 200
116506MR H6 150 215 92 10 / 200
116507MR H7 150 215 120 10 / 200
116508MR H8 200 280 212 10 / 80
116510MR H10 200 280 289 10 / 80

404
L- type Wrench Set
• Material - SNCM - V alloy steel
• Finishing - chrome plated with black tip

22106MR
Kg
6
Spec. Contents 0.68 1 / 20 PC. 8
PC.
Ball & hex
two way type H3, H4, H5, H6, H7, H8
1160MR

22108MR
Kg 0.97 1 / 10
Spec. Contents

Ball & hex H2, H2.5, H3, H4, H5, H6, H8,
two way type 1160MR H10 22108MR
22106MR

6
22208MR PC.

Spec. Contents
Kg 0.97 1 / 10 8
PC.
H2, H2.5, H3, H4, H5, H6, H8,
Hex head
1165MR H10

22306PR
Kg 0.46 1 / 20
Spec. Contents

torx head / T10H, T15H, T20H, T25H, T30H,

Tamper resistant 1163R T40H 22208MR 22306PR

8
22309PR PC.

Spec. Contents
Kg 1.00 1 / 10 9
PC.
torx head / T10H, T15H, T20H, T25H, T27H,
Tamper resistant 1163R T30H, T40H, T45H, T50H

22118MR
Kg 1.10 1 / 12
Spec. Contents

Ball & hex

two way type H2, H2.5, H3, H4, H5, H6, H8, H10 22118MR
1160MR
22309PR

8 9
22218MR PC. PC.
Kg 1.10 1 / 12
Spec. Contents

Hex head H2, H2.5, H3, H4, H5, H6, H8, H10
1165MR

22319PR
Kg 1.20 1 / 12
Spec. Contents

torx head / T10H, T15H, T20H, T25H, T27H,

Tamper resistant 1163R T30H, T40H, T45H, T50H 22218MR 22319PR

405
 T - type Wrench
• Material - SNCM - V alloy steel
• Finishing - chrome plated with black tip
KT No. & D1

1150MR
▪ Hexagon with ball point head

KT NO. g
mm mm mm mm
115002MR H2 100 137 90.4 28 10 / 200
115025MR H2.5 100 137 90.4 30 10 / 200
115003MR H3 100 137 90.4 32 10 / 200
115004MR H4 100 137 90.4 38 10 / 200
115005MR H5 150 188 100 65 10 / 200
115006MR H6 150 188 100 79 10 / 200
115008MR H8 200 240 120 159 10 / 120
115010MR H10 200 240 120 217 10 / 120

1155MR 1155SR
▪ Hexagon head

KT NO. g
mm / inch mm mm mm
115502MR H2 100 137 90.4 28 10 / 200
115525MR H2.5 100 137 90.4 30 10 / 200
115503MR H3 100 137 90.4 32 10 / 200
115504MR H4 100 137 90.4 38 10 / 200
115505MR H5 150 188 100 65 10 / 200
115506MR H6 150 188 100 79 10 / 200
115508MR H8 200 240 120 159 10 / 120
115510MR H10 200 240 120 217 10 / 120
115525SR 5/64 100 137 90.4 28 10/200
115503SR 3/32 100 137 90.4 30 10/200
115504SR 1/8 100 137 90.4 32 10/200
115505SR 5/32 100 137 90.4 38 10/200
115506SR 3/16 150 188 100 65 10/200
115508SR 1/4 150 188 100 79 10/200
115510SR 5/16 200 240 120 159 10/120
115512SR 3/8 200 240 120 217 10/120

1153R
▪ For torx head screw

KT NO. g
mm mm mm mm
115310R T10 100 137 90.4 40 10 / 200
115315R T15 100 137 90.4 40 10 / 200
115320R T20 100 137 90.4 40 10 / 200
115325R T25 100 137 90.4 40 10 / 200
115327R T27 150 188 100 73 10 / 200
115330R T30 150 188 100 74 10 / 200
115340R T40 150 188 100 88 10 / 200
115345R T45 200 240 120 173 10 / 120
115350R T50 200 240 120 173 10 / 120

11A3R
▪ For torx head screw
▪ Length: 200mmL

KT NO. g
Size mm mm mm
11A310R T10 200 237 90.4 52.8 12 / 192
11A315R T15 200 237 90.4 53.0 12 / 192
11A320R T20 200 237 90.4 53.2 12 / 192
11A325R T25 200 237 90.4 53.4 12 / 192
11A327R T27 200 238 100 86.4 10 / 160
11A330R T30 200 238 100 86.4 10 / 160
11A340R T40 200 238 100 104.8 10 / 160

406
T - handle Wrench • Material - Chrome vanadium steel
• Finishing - chrome plated KT No. & D1

1195M
▪ 6 Point
▪ For hexagon head screw
▪ The handle pin can be removed for another wrench

KT NO. g
mm mm mm
119502M H2 64 126.5 22 10 / 200
119525M H2.5 64 126.5 22 10 / 200
119503M H3 64 126.5 23 10 / 200
119504M H4 89.5 181 62 10 / 200
119505M H5 89.5 182 65 10 / 200
119506M H6 105 210 120 6 / 48
119508M H8 124 250 224 4 / 32
119510M H10 145 300 386 5 / 50

T - type Wrench & Set

21108MR 8 8
PC. PC.
Kg 1.1 1 / 12
Spec. Contents

Ball hex type H2, H2.5, H3, H4, H5, H6, H8, H10
1150MR

21208MR 21108MR 21208MR

21208SR
Kg 1.1 1 / 12
Spec. Contents
8 9
PC. PC.
H2, H2.5, H3, H4, H5, H6, H8, H10
1155MR
Hexagon type
5/64, 3/32, 1/8, 5/32, 3/16, 1/4,
1155SR 5/16, 3/8

21309PR
21208SR 21309PR
Kg 1.2 1 / 12
Spec. Contents

torx head T10, T15, T20, T25, T27, T30, T40,

type 1153R T45, T50

407
 Torx Screwdriver

1153A
Wing Handle torx 23308PR
Screwdriver Wing Handle torx
Screwdriver Set
8
PC.

KT NO. g
Size mm mm mm
1153A05R T5 45 84 35 6 20 / 200
1153A06R T6 45 84 35 6 20 / 200
1153A07R T7 45 84 35 6 20 / 200
1153A08R T8 45 84 35 6 20 / 200
1153A09R T9 45 84 35 9 20 / 200
1153A10R T10 45 84 35 9 20 / 200 g
Contents 264 1 / 20
1153A15R T15 45 84 35 9 20 / 200
1153A20R T20 45 84 35 9 20 / 200
T5, T6, T7, T8, T9, T10, T15, T20

1163A
1153A

Flag Handle torx 24308PR

Screwdriver Flag Handle torx
Screwdriver Set
8
PC.

KT NO. g
Size mm mm mm
1163A05R T5 45 84 30.9 7 20 / 200
1163A06R T6 45 84 30.9 7 20 / 200
1163A07R T7 45 84 30.9 7 20 / 200
1163A08R T8 45 84 30.9 7 20 / 200
1163A09R T9 45 84 30.9 9 20 / 200 g
Contents 272 1 / 20
1163A10R T10 45 84 30.9 9 20 / 200
1163A15R T15 45 84 30.9 9 20 / 200
1163A20R T20 45 84 30.9 9 20 / 200 T5, T6, T7, T8, T9, T10, T15, T20
1163A

408
409
 IC SPECIALIZED
TOOLS
▪ Precision Pliers

▪ Precision Screwdriver

▪ Soldering & Desoldering

▪ Tweezers

▪ Soldering Iron Stand

▪ Punch Down Tools

MEASURING TOOLS
▪ Digital Multimeter

▪ Tester Tools

410
411
 Precision Pliers
6207-05 Diagonal cutting nippers
C

Overall length Cutting capacities A B C D

KT NO. inch mm ø mm ø mm α mm mm mm mm
g

6207-05 4-3/4 118 2.0 1.6 - 10.8 11.5 7.1 - 88 6 / 120

6927-05 For plastic

C

Overall length Cutting capacities A B C D

KT NO. inch mm ø mm ø mm α mm mm mm mm
g

6927-05 4-3/4 118 - - - 10.3 11.5 7.1 - 71 6 / 120

6217-05 Diagonal cutting nippers

D

B
α
A

Overall length Cutting capacities A B C D

KT NO. inch mm ø mm ø mm α mm mm mm mm
g

6217-05 4-3/4 118 2.0 1.0 35° 11.8 17 12.7 17.7 76 6 / 120

6247-05 Diagonal cutting nippers

D

B
α
A

Overall length Cutting capacities A B C D

KT NO. inch mm ø mm ø mm α mm mm mm mm
g

6247-05 5 125 1.0 0.5 45° 11.4 19.4 7.5 55 73 6 / 120

412
Precision Pliers
6271C Diagonal cutting nippers
▪ The cutting edge hardness at least 73° HRC up
A

• The cutting edge is made from tungsten

steel for an extremely long service life.
Overall length A B C g
KT NO. inch mm mm mm mm
6271-05C 5 125 0.6 13.2 15 7.1 77 6 / 120
6271-65C 6-1/2 160 0.6 19.2 26 10.7 151 6 / 120

6317-06 Long nose pliers

D E

C
A

Overall length Cutting capacities A B C D E g

KT NO. inch mm ø mm ø mm mm mm mm mm mm
6317-06 6 157 2.0 1.6 11.6 50 7.5 2 2 84 6 / 120

6367-06 Half-round nose pliers

D E

C
A

Overall length Cutting capacities A B C D E g

KT NO. inch mm ø mm ø mm mm mm mm mm mm
6367-06 6 154 2.0 1.6 11.7 46 7.5 1.5 1.7 78 6 / 120

6377-55 Half-round nose pliers

D E

C
A

Overall length Cutting capacities A B C D E g

KT NO. inch mm ø mm ø mm mm mm mm mm mm
6377-55 5-1/2 138 2.0 1.6 11.3 30 7.5 1.5 1.5 97 6 / 120

413
 Precision Pliers
6337-06 Bent nose pilers
E
D
F

C
A

Overall length Cutting capacities A B C D E F

KT NO. inch mm ø mm ø mm α mm mm mm mm mm mm
g

6337-06 6 154 2.0 1.6 40° 11.3 50 7.5 2 2.5 14 84 6 / 120

6347-05 Round-nose pliers

D E

A
C

Overall length A B C D E g
KT NO. inch mm mm mm mm mm mm
6347-05 5 128 11.4 24.9 7.5 1 2.14 74 6 / 120

63A7-05 Round-nose pliers

D E

A
C

Overall length A B C D E g
KT NO. inch mm mm mm mm mm mm
63A7-05 5 128 11.5 24.7 7.5 3.3 1.8 75 6 / 120

63B7-05 Round-nose pliers

D E

A
C

Overall length A B C D E g
KT NO. inch mm mm mm mm mm mm
63B7-05 5 128 11.5 24.7 7.5 1.3 1.8 74 6 / 120

414
Precision Screwdriver
• Shank material - SNCM - V alloy steel
• Grip material - PP
• Finishing - chrome plated with black tip

1431
▪ Phillips head, hex-shank
▪ DIN ISO 8764

Ø g
KT NO. No. mm mm
14313015 PH000 1.5 40 7 10 / 320
14312015 PH00 2.0 40 7 10 / 320
14311015 PH0 3.0 40 13 10 / 100
14311115 PH1 4.0 40 16 10 / 100
14313003 PH000 1.5 75 8 10 / 320
14312003 PH00 2.0 75 8 10 / 320
14311003 PH0 3.0 75 14 10 / 100
14311103 PH1 4.0 75 18 10 / 100

1432
▪ Slotted head, round shank
▪ Metric size
▪ DIN 5263
KT NO. Ø g
mm mm mm mm
14320615 0.6 0.15 40 3.0 9 10 / 320
14320815 0.8 0.19 40 3.0 9 10 / 320
14321015 1.0 0.20 40 3.0 9 10 / 320
14321515 1.5 0.23 40 3.0 10 10 / 320
14321815 1.8 0.30 40 3.0 10 10 / 320
14322015 2.0 0.40 40 2.0 11 10 / 100
14322515 2.5 0.40 40 2.5 12 10 / 100
14323015 3.0 0.50 40 3.0 13 10 / 100
14323515 3.5 0.60 40 3.5 14 10 / 100
14324015 4.0 0.80 40 4.0 16 10 / 100
14321003 1.0 0.20 75 3.0 11 10 / 320
14321503 1.5 0.23 75 3.0 11 10 / 320
14321803 1.8 0.30 75 3.0 11 10 / 320
14322003 2.0 0.40 75 2.0 11 10 / 100
14322503 2.5 0.40 75 2.5 13 10 / 100
14323003 3.0 0.50 75 3.0 15 10 / 100
14323503 3.5 0.60 75 3.5 16 10 / 100
14324003 4.0 0.80 75 4.0 18 10 / 100

1433
▪ For torx head, round shank

Ø g
KT NO. Size mm mm
14330415 T4 3 40 10 10 / 320
14330515 T5 3 40 10 10 / 320
14330615 T6 3 40 10 10 / 100
14330715 T7 3 40 10 10 / 100
14330815 T8 3 40 10 10 / 320
14330902 T9 4 50 16 10 / 100
14331002 T10 4 50 16 10 / 100
14331502 T15 4 50 16 10 / 100
14332002 T20 4 50 16 10 / 100
14330403 T4 3 75 11 10 / 320
14330503 T5 3 75 11 10 / 320
14330603 T6 3 75 11 10 / 320
14330703 T7 3 75 11 10 / 320
14330803 T8 3 75 11 10 / 320
14330903 T9 4 75 18 10 / 100
14331003 T10 4 75 18 10 / 100
14331503 T15 4 75 18 10 / 100
14332003 T20 4 75 18 10 / 100

415
 Precision Screwdriver
91230
▪ Screwdriver handle for interchangeable blades 2431, 2433
▪ Handle material - polypropylene (PP)

KT NO. g
mm
91230 100 12 10 / 100

2431
▪ Combination type
▪ Phillips / Slotted head, hexagonal shank
▪ Blade material - SNCM - V alloy steel
▪ Finishing - chrome plated with black tip

KT NO. g
No. mm mm mm mm
24312020 PH00 2.0 0.30 4 120 11 20 / 200
24311030 PH0 3.0 0.50 4 120 11 20 / 200
24311140 PH1 4.0 0.60 4 120 11 20 / 200

2433
▪ Combination type
▪ Torx head, hexagonal shank
▪ Blade material - SNCM - V alloy steel
▪ Finishing - chrome plated with black tip

KT NO. g
Size mm mm
24330610 T6 x T10 4 120 11 20 / 200
24330715 T7 x T15 4 120 11 20 / 200
24330820 T8 x T20 4 120 11 20 / 200
24330915 T9 x T15 4 120 11 20 / 200

416
Precision Screwdriver Set
32218MR 8
Kg PC.
9
Contents 0.32 1 / 30 PC.
1.0 x 75, 1.5 x 75, 1.8 x 75, 2.0 x 75,
1432 2.5 x 75, 3.0 x 75, 3.5 x 75, 4.0 x 75

32209MR
Kg 0.26 1 / 30
Contents

0.8 x 40, 1.0 x 40, 1.5 x 40, 1.8 x 40,

1432 2.0 x 40, 2.5 x 40, 3.0 x 40, 3.5 x 40, 4.0 x 40
32218MR 32209MR

32108MR
Contents
Kg 0.24 1 / 30 8 8
PC. PC.
PH000 x 40, PH00 x 40,PH0 x 40, PH1 x 40
1431
1.5 x 40, 2.0 x 40, 2.5 x 40, 3.0 x 40
1432

32118MR
Kg 0.32 1 / 30
Contents

PH000 x 75, PH.00 x 75, PH0 x 75, PH1 x 75 32108MR

1431 32118MR
1.5 x 75, 2.0 x 75, 2.5 x 75, 3.0 x 75
1432

32309PR 8
Contents
Kg 0.26 1 / 30 PC. 8
PC.
T4 x 40, T5 x 40, T6 x 40, T7 x 40, T8 x 40,
1433 T9 x 50, T10 x 50, T15 x 50, T20 x 50

32607MR
Kg 0.22 1 / 30
Contents

32309PR 32607MR
PH00 x 2.0, PH0 x 3.0, PH1 x 4.0
2431
T6 x T10, T7 x T15, T8 x T20, T9 x T15
2433

31419MR
▪ Precision screwdriver set
114
PC.

Each
KT NO. Contents Q'ty

PH000 x 40, PH00 x 40,

1431 PH0 x 40, PH1 x 40

0.6 x 40, 0.8 x 40, 1.0 x 40,

1.5 x 40, 1.8 x 40, 2.0 x 40, Screwdriver shelf size (mm) : 383 x 136 x 130
31419MR 1432 2.5 x 40, 3.0 x 40, 3.5 x 40, 6
4.0 x 40
KT NO. Kg CUFT
T4 x 40, T5 x 40, T6 x 40, T7 x
40, T8 x 40 31419MR-A 0.79 0.23
1433
31419MR-D 1.17 0.14

417
 Soldering Iron

• 6BC-A • 6BC-B • 6BC-C • 6BC-D • 6BC-F

6BC23 30W 6BC24 40W

6BC26 60W 6BC210 100W
▪ 110V~240V, 30W, 40W, 60W, 100W
▪ For electrical and stained glass work
▪ Lightweight handle
▪ Replaceable tip
▪ No CE certification

Voltage Rating
KT NO. g
V W
6BC23A 220-240 30 160 54
6BC23B 220-240 30 125 54 6BC23 / 6BC24 / 6BC26
6BC23C 220-240 30 196 32
6BC23D 220-240 30 160 32
6BC23F 110-120 30 125 54
6BC24A 220-240 40 125 54
6BC24B 220-240 40 125 54
6BC24C 220-240 40 196 32
6BC24F 110-120 40 125 54
6BC26A 220-240 60 166 54
6BC26B 220-240 60 166 54 6BC210
6BC26C 220-240 60 216 32
6BC26F 110-120 60 166 54
6BC210A 220-240 100 210 20
6BC210B 220-240 100 210 20
6BC210C 220-240 100 330 20
6BC210D 220-240 100 288 20
6BC210F 110-120 100 210 20

Soldering Iron Tip (Conical Type)

6BC23-1 6BC26-1 6BC26-3
▪ Copper-based iron tips are manufactured using
patented process which produces a uniform iron
and chrome plating thickness 6BC23-1
▪ All tips are pre-tinned

Rating Ø g
KT NO. W mm 6BC26-1
6BC23-1 30 4 13 100 / 4200
40 4 13 100 / 4200
6BC26-1 60 6 16 100 / 1600
6BC26-3 60 6 16 100 / 1600 6BC26-3

418
Gas Soldering Iron Set
6BC3007
▪ Power range : 30W-150W
▪ Cordless
8
PC.
▪ Four different tips
▪ Soldering temperature can be
adjusted:400°C~450°C (750°F~840°F)
▪ Tank fuel for 90 minutes of operation
▪ Torch temperature:1300°C (2400°F)
▪ Fuel capacity: 20ml
▪ Ready to use 45 seconds after ignition
▪ Pure butane gas

Kg
KT NO. Contents 0.45 20

6BC372 Gas saldering iron 257mm

+
6BC372-1 Conical

6BC372-2 2.5mm round

6BC372-3 3.5mm chisel

6BC372-4 4.5mm angle

6BC372-5 Reflector

Desolder wire / Sn 99.3%,

6BF21-17
Cu 0.7%

Foam

419
 Desolder Wire
6BF11-17
▪ 40% lead and 60% tin

Size g
KT NO. mm
6BF11-17 1.0 17 20 / 480

Desoldering Pump
6BD11
▪ One-hand operation
▪ ABS Body, teflon nozzle

Overall length g
KT NO. mm
6BD11 195 42 8 / 32

6BD22
▪ Anti-static solder desoldering pump
▪ Teflon suction head
▪ Aluminum body

• Turn down the • Clean • Turn up the body

body
Overall length g
KT NO. mm
6BD22 197 85 50 / 100

Soldering Aid
6BE11-07 6BE12-07 6BE16-07
▪ Brush / Scraper: ▪ Scraper / Curved Probe: ▪ Pointed / Slotted Probe:
For removing flux residue For component and lead Fits wire up to 22AWG.
and surplus solder extraction For wrapping and unwrapping etc

Overall length g
KT NO. 6BE11-07
mm
6BE11-07 175 15 1 / 200
6BE12-07
6BE12-07 175 15 1 / 200
6BE16-07 180 15 1 / 200 6BE16-07

420
Straight Fine Point Tweezers
6AF11-125
▪ Stainless steel with straight fine point
▪ Used for soldering integrated circuit chip,
installing or replacing components
▪ It's suitable for doing precise repairing work

Overall length g
KT NO. mm
6AF11-125 124 16 50 / 800

Reverse Action Tweezers

6AF21-165
▪ Stainless steel with tapered tips and flat points
▪ For holding small parts when soldering or spraying

Overall length g
KT NO. mm
6AF21-165 172 29 30 / 480

Mini Soldering Iron Stand

6BC100
▪ Lightweight and high temperature bakelite resistance
▪ Mini size, easy to take
▪ Used for holding solder iron
g 12 12 / 240

Soldering Iron Stand with Sponge

6BC200
▪ Suitable for most pencil type soldering irons
▪ Convenient for easy storage
▪ Sponge for tip cleaning
▪ Double spiral spring construction prevents the hot soldering
iron from accidentally burning the surface of other objects
when it is inserted into the stand
g 187 4 / 24

421
 Punch Down Tool
6AH
▪▪For setting wire into terminal blocks or cut
off wire end after terminated
▪▪Blade : 66 & 110/88 & Krone type

Overall length g
KT NO. Type inch mm
6AH11 110/88 6-3/4 170 140 1 / 80
6AH12 KRONE 6-3/4 170 140 1 / 80
6AH13 66 6-3/4 170 140 1 / 80
6AH01-1 6AH14 66 &110/88 6-3/4 170 140 1 / 80
FOR USE ON 110/88 TYPE
Blade
6AH01-2 storage

HI
IMPACT
CUT

RELEASE
BLADE
FOR USE ON KRONE TYPE

LO
6AH01-3
Sure-lock High / low Release
FOR USE ON 66 TYPE blade holder Impact Blade
pressure
6AH01-4
FOR USE BOTH 66 & 110/88 TYPE

PVC Electrical Insulation Tape

6AG11-20

Overall length g
KT NO. mm
6AG11-20 18 52 1 / 250

422
Electronic Tool Set
90217PQ
▪▪To repair electronic equipment....etc.
17
90217PQ PC.
6BC23B
Soldering iron 220V/30W

90217PQ01
6BC23A
Soldering iron 220V/30W

90217PQ02
6BC23D
Soldering iron 220V/30W

90217PQ03
6BC23F
Soldering iron 110V/30W
g
Contents 1260 1/8

1412 3x75, 5.5x100, 6.5x100

1411 PH0x75, PH1x100, PH2x100

6BF11-17 6BD11 7976-65

6207-05 6377-55 6741-06 3611-06R 6BC23

6AF11-125 6CB02 6BC100

91038MY01
▪▪To repair electronic & electrician equipment…etc

g
Contents 3130 1

1421 PH0x60, PH1x80, PH2x100

1422 3x75, 5x75, 6.5x100

6207-05 6377-55 6313-06 6AB12-55 6732-09

6BF11-17 6BD11 7976-65 6AF11-125

87137

6BE11-07 6BE12-07 6BE16-07

6AG11-20

6BC200 6BC24A
220V / 40W 9DM1361
1036ZQ ST20219MY1

87721B

423
 Measurement level
The input voltage should not exceed the maximum value.

Inside wire
Distribution CAT.III CAT.II
panel
Outside wire

CAT.IV CAT.I

Outlet
Fixed equipment ... etc.
Equipment

Measurement level Description Example

Measurement directly connected to the The secondary of the transformer

CAT.I
power supply circuit board measured
Measurement board directly connected to
CAT.II Equipment, portable devices
the low voltage devices

CAT.III Equipment within the building Distribution panels, circuit breakers

CAT.IV Sources of all low voltage installations Overhead lines, cable facilities
 Lit when in DC mode Lit when in Unit for voltage
measurement diode check mV V measurement

Lit when in AC mode

measurement Date hold indication Numeral date display

Negative polarity
indicator-lit when the
Lit when the
battery is low hFE Lit when in transistor
hFE check
polarity is negative

AUTO Auto range indicator M K mA A

Unit for resistance Unit for current measurement
Lit when in measurement
continuity check

LCD DISPLAY

SELECT KEY DATA HOLD KEY

INPUT TERMINAL 10A

USEAGE ONLY
‧ The Max. protective fuse for
、 、 、 is 0.5A/250V
‧ The Max.protective fuse for

、 is 15A/250V

POWER & FUNCTION SWITCH

AC voltage AC/DC current

measurement in OFF Turn off the power
measurement
10 amperes

DC voltage NPN Transistor in NPN PNP Transistor in PNP hFE

measurement hFE measurement measurement

AC/DC current
measurement in LED LED test
micro-amperes
AC/DC current Resistance measurement /
measurement in AC or DC measrement Diode test / Continuity check
milli-amperes

425
 Digital Multimeter
9DM1361
▪ Date hold,auto range,auto power off selection, auto power off
cancelation
▪ Unit & function indication, Maximum reading value 1999 digits.
Negative polarity indicator (no indication is given for positive polarity)
▪ Low power consumption
▪ Fuse with : 500mA / 660V & 10A / 600V
▪ CE approval IEC61010-1 (2010), CAT.II 600V, CAT.III 300V

Specification
DC Voltages (0.1mV ~ 1V) 200mV / 2V / 20V / 200V / 600V
AC Voltages (0.001V ~ 1V) 2V / 20V / 200V / 600V
DC Ampere (0.1uA ~ 0.01A) 200uA / 2000uA / 20mA / 2A / 10A
AC Ampere (0.1uA ~ 0.01A) 200uA / 2000uA / 20mA / 2A / 10A
Resistance (0.1Ω ~ 0.01MΩ) 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ
Continuity check Yes
Diode test Yes
hFE(NPN, PNP) Yes
LED check Yes
Low battery indicator Yes
LCD Display 3 1/2 digits 2000 counts
Sampling rate 3 times / sec
Size (mm) g
KT NO. L x W x H
9DM1361 138 x 70 x 32 85 10 / 40

9DM1361

6 10A
< 60s

Diode Test
(A) Forward-bias Diode Test
Connect the black testing lead to the cathode and
red testing lead to the anode. Silicon diodes should
give a reading approximately 0.5~0.7V and GE
diodes give 0.2~0.3V. In case the reading value is
near to "0" , it means short circuit. If LCD display "OL",
it means open circuit.

(B) Reverse-bias Diode Test

Conect the black testing lead to the anode and the
red testing lead to the cathode. 9DM1361

6 10A
< 60s

9DM1361

6 10A
< 60s

AC Voltage, DC Voltage, Resistance Measurement

Continuity Check Apply the test leads to the object under test and then
Apply the test leads to the circuit under test read the value when it stabilizes.
and the beeper will sound while the circuit is
continuous and below 100 Ω

426
Digital Multimeter
9DM1381
▪ Pocket size with flip cover design
▪ Approx. 4300 counts LCD display
▪ Auto range, auto power off selection
▪ Low power consumption
▪ CE approval EN61010-1, CAT.II 600V, CAT.III 300V
▪ Attachable test leads, easy operation

Specification
400mV / 4V / 40V / 400V
DC Voltages (0.1mV ~ 1V)
/ 600V
AC Voltages (0.001V ~ 1V) 4V / 40V / 400V / 600V
400Ω / 4kΩ / 40kΩ /
Resistance (0.1Ω ~ 0.01MΩ)
400kΩ / 4MΩ / 40MΩ
Continuity check Yes
Diode test Yes
Overload indicator OL
Low battery indicator Yes
Sampling rate Approx. 2 times / sec

Size (mm) g
KT NO. L x W x H
9DM1381 117 x 76 x 18 121 20 / 80 • Light & Handy in your
pocket.

Digital Clamp Meter

9DM2351
▪ Max clamp size: Ø 30mm
▪ Unit & function indication , maximum reading value 1999 digits
▪ Negative polarity indicator (no indication is given for positive polarity)
▪ Auto power off selection approx. 15 minutes
▪ Low power consumption
▪ CE approval IEC 61010-1 , IEC 61010-2-032
CAT.III 600V Pollution Degree 2
▪ Attachable test leads, easy operation
Specification
AC Ampere (0.1A - 1A) 200A / 600A
AC Voltages (0.001V - 1V) 2V / 20V / 200V / 600V
200mV / 2V / 20V /
DC Voltages (0.1mV - 1V)
200V / 600V
200Ω / 2kΩ / 20kΩ /
Resistance (0.1Ω - 0.01MΩ)
200kΩ / 2MΩ / 20MΩ
Continuity check Yes
Diode test Yes
Low battery indicator Yes
LCD Display 3 1/2 digits 1999 counts
Sampling rate 3 times / Sec.
Overload indicator OL

Size (mm) g
KT NO. L x W x H
9DM2351 189 x 71 x 37 354 5 / 40

427
 Infrared Thermometer
9DN12
▪ Without contact with the object
▪ IR point can be displayed clearly
▪ °C and °F interchangeable functions
▪ Selection of different materials
▪ Dark screen backlight test board functions
▪ 15 seconds automatically turn off the screen
▪ 9V battery * 1 (included)
Technical data
Temperature range -30~550°C (-22~1022°F)
Operating temperature 0~50°C
Resolution 0.1°C / 0.1°F
Accuracy ±2.5% OR 3°C
Emissivity Selectable (0.85 / 0.90 / 0.95)
Distance to spot ratio 12:1
Auto power off 15 seconds
Laser pointer Class 2 Laser < 1 mW
Overall Size (mm) g
KT NO. L x W x H
9DN12 193 x 47 x 126 313 5 / 20

Testing Screwdriver
6CB02
▪ Testing range : 100~500V
▪ CE approval
▪ Don't use the testing screwdriver as
screwdriver
▪ Neon indicator

KT NO. Testing range g

6CB02 100~500V 15 12 / 288

428
Digital Voltage Tester
6CB21
▪ Self-Diagnostic test
▪ Built-in LED flashlight
▪ LCD Display
▪ Protection IP64
▪ AAA 1.5V x 2pcs
▪ Standard category:
EN 61243-3 / IEC 61243-3
EN 61010-1 / IEC 61010-1
CAT.III 690V / CAT.IV 600V
Specification
12, 24, 50, 120, 230,
DC Voltage Test
400, 690V
Polarity indication Yes
12, 24, 50, 120, 230,
AC Voltage Test
400, 690V
Phase rotation test Yes
High voltage indication ≧ 50V
Frequency range 0-70Hz
Continuity test 0~550KΩ
Operation condition -10~55°C

Overall Size (mm) g

KT NO. L x W x H
6CB21 255 x 66 x 30 250 5 / 20

AC Non-contact Voltage Tester

6CB31
▪ Voltage ranges : 80 to 1000V AC.(50~60Hz)
▪ Application :
AC voltage in outlets, lighting, circuit breakers, wires
and cables etc..
▪ Adjustable sensitivity voltage detection
▪ Visible LED light voltage indicator in tip
(Green light is high gear, red light is low gear)
▪ AAA battery x 2 PC. included
▪ Standard category :
EN 61000-6-3 / EN 61000-6-1 CAT III

Overall size (mm) g

KT NO. L x W x H
6CB31 160 x 20 x 24 72 10 / 100

429
 WIRE & CABLE TOOLS
▪ Scissors

▪ Cable Cutter

▪ Knife

▪ Wire Strippers

▪ Cable Strippers

▪ Crimping Tool

430
Electrician Scissors
6AB13-06
▪ High cutting performance by low cutting force

Ergonomic design, handles made of

high compressive strength and non-
slip nylon fiber+ TPV
Special handle design, also suitable
for the left-hander

Blades made of AUS-8, serrated on the edge can

prevent objects from slip away, soft cable, up to
dia 38mm2, insulation materials, electrical tape
cable tie

• 38mm2 wire

Size=1:1

Overall length Cutting capacity Cutting capacity g

KT NO. inch mm mm AWG mm2
6AB13-06 6 150 26 2 38 114 12 / 72

6AB21-65
▪ Curved mouth cable cutter
▪ Safety blade locking system

Overall length Cutting length Cutting capacity g

KT NO. inch mm mm Ø mm
6AB21-65 6-1/2 158 22 10 156 12 / 72

431
 Multi-purpose Scissors
6AB12-55
▪ Stainless steel with serrated edges
• Grip material - PP + TPR

Overall Cutting capacities (mm)

KT NO. length Electric Cardboard Rubber Leather Rolled Copper Aluminum g
mm cable steel (soft)
6AB12-55 145 55 10 10 10 10 0.5 0.5 0.5 94 12 / 72

6AB31
▪ Even mouth cable cutter
▪ Safety blade locking system

6AB31-75 6AB31-85

Overall length Cutting capacity Cutting capacity g

KT NO. AWG mm2
inch mm mm Leather Copper(soft) Aluminum
6AB31-75 7-1/2 185 52 16-12 1.5-4.0 2.0 0.5 0.5 160 12 / 72
6AB31-85 8-1/2 214 78 16-12 1.5-4.0 2.0 0.5 0.5 196 12 / 72

• Cut cable , cardboard , rubber , leather , rolled steel , copper (soft) , aluminum , carpet , branch and so on.

432
Cable Cutting Pliers
6141C
▪ Polished head
▪ For cutting copper and
aluminum cables, single Ø
and multiple wire
1 - 08
61 4

Overall length Cutting capacity g

KT NO. inch mm DIN(mm2) AWG
6141-06C 6 160 33 2 169 6 / 120
6141-08C 8-3/8 212 67 2/0 282 6 / 60

Cable Cutter
6AD
▪ Cable cutter for cutting copper and aluminum cable

• Can be use with : 67B3-55 440 / 6AC51 448

Overall length Cutting capacity

KT NO. g
mm DIN(mm2) AWG(MCM)

6AD17-150 435 150 300 1339 1 / 20

6AD23-400 595 400 800 1847 1 / 10

Ratcheting Cable Cutter

6AD10-325
▪ Cut soft copper, aluminum and multiple conductor
cable to 325mm2 (600MCM)
▪ Cuts hard drawn copper to 200mm2 (400MCM)

Overall length Cutting capacity g

KT NO. mm mm2 AWG(MCM)
6AD10-325 255 325 600 613.2 10 / 30

433
 Ratcheting Cable Cutter
6AD10-3P01
▪ Spare blade for 6AD10-325

Capacity g
KT NO. mm2
6AD10-3P01 325 58 1 / 100

Utility Cutter
7971-07
▪ Automatically reloading snap-off blades
▪ Ergonomic soft ABS TPR handle
▪ Stainless steel blade guide
▪ Blade lock knob
▪ 4-blade cartridge(18mm)

7971-07P02
(18mm, 10 PC.)
L
L g
KT NO. mm
7971-07 165 180 6 / 72

7976-65

L g
KT NO. mm
7976-65 165 82 8 / 64

434
Electrician Knife
7932-04
▪ Electrician knife with wire stripper
▪ 1 blade with half-moon notch for stripping and
vee for cutting

Blade length Closed length Overall length g

KT NO. mm mm mm
7932-04 85 110 196 75 10 / 180

7933-45
▪ Straight blade electrician knife

Blade length Closed length Overall length g

KT NO. mm mm mm
7933-45 85 120 205 111 10 / 180

7934-45
▪ Billhook blade electrician knife

Blade length Closed length Overall length g

KT NO. mm mm mm
7934-45 75 120 191 125 10 / 180

435
 Multi-purpose Wire Stripper
6751-44
▪ Wire stripper
▪ Wire cutter
▪ Cable stripper

rs
Plie per
1 le strip
Cab
2
per
es trip
C abl
3

er
tri pp
es
Wir
4 tte
r
u
r ec
Wi
5

ck
Lo
6

1 2 3

Preparation blade

4 5 6

Wire stripper Cable stripper Wire cutter g

KT NO. Ø mm AWG Ø mm Ø mm
6751-44 0.8-2.6 20-10 6-10 6 116 10 / 100

436
Wire Stripper
6762-08

•Wire stripper • Insulated terminal

crimping

• Wire cutter

Wire stripper Wire cutter Insulated terminal crimping g

KT NO. mm2 AWG Ø mm mm2 AWG
6762-08 0.2-0.6 24-10 6 0.5-6 22-10 271 15 / 60

67A1-07

Wire stripper Wire cutter g

KT NO. mm2 AWG Ø mm
67A1-07 0.05-3.5 30-12 5 209 12 / 60

437
 Cable Stripper
6755-05
▪ UTP/STP, flat cable stripper & cutter
▪ Material: ABS

Closed lock

CAB L E

UTP/STP cable stripper (Ø 2.6 ~ Ø 8.0) Adjustable Adjustable

(Blades) (Spring)
RJ-45 (12 mm),

12

6
Flat cable stripper / cutter RJ-11/12 (6 mm) UTP/STP
Cable stripper
Flat cable
(Ø 2.6 ~ Ø 8.0) stripper / cutter
Overall length g
KT NO. inch mm RJ-45 (12 mm)
6755-05 5 127 72 20 / 120 RJ-11/12 (6 mm)

Coax. Cable Stripper

6756-05
▪ 2-Blades model
▪ Material: ABS

CAB L E

Stripper dimension "d" 6.4 mm D

Stripper distance RG-174/58/59/62/6 Adjustable Adjustable

2-Blades model 3C/4C/5C (Ø 2.6 ~ Ø 8.0) (Blades) (Spring)

Overall length g
KT NO. inch mm
6756-05 5 127 68 20 / 120

438
Multi-stripper
67B2-05

Sliding lock

Pen holder

Stripping capacity
• Round cables between : 8-13mm
2
Overall length g
• Wire cable : 0.5 1.0 1.5 2.5 4.0 6.0mm
KT NO. inch mm • AWG : 20 18 16 14 12 10
67B2-05 4-3/4 120 69 15 / 90 • Coax.cable : RG-6 / RG-59

360°
360°

360°

• Stripping of round cables • Stripping common cable

between 8-13 mm dia AWG 20-10

• Stripping RG-6 / RG-59

Coax.cable

• Stripping length setting

439
 Cable Stripper
67B3-55
▪ Fast and safe stripping of round cable sheaths made
of PVC or rubber from 6-45mm dia
▪ Adjustable knurled nut for max 6mm sheath

• Can be use with : 6AC51 448 / 6AD 433

Cable stripper Overall length g

KT NO. Ø mm inch mm
67B3-55
67B355 6-45 5-1/2
140 5-1/2
140 170 10 / 100

• Adjustable cutting depth

Remove the
Stop cable sheaths
without damage
of the inner
conductors
• Push cover

360°

360°

• Simple rotating the tool

body

440
Cable Tie Fasten Tool
67E2-08
▪ Fasten nylon ties, up to 9mm in width
▪ Long stroke for fast action
▪ Tails cut separately to desired length

L Max. cutting g
KT NO. mm width (mm)
67E2-08 191 9 310 5 / 40

441
 ■ Crimp die profiles
Symbol

Phone plugs 6 pin

Modular plugs 8 pin

Symbol

Insulated terminal connectors CATV “F” , BNC ,

COAX , and fiber
optics connectors

Non-Insulated terminal connectors

Pin terminal, Insulated &

Non-Insulated ferrules

Non-Insulated terminal,
Lug connectors

442
Modular Crimping Tool
67F1-08
▪ For cutting / stripping / crimping
▪ 2 types of plugs in 1 tool
▪ Grip material - PP+TPR

• 6P
Stripper 6P Stripper 8P

6P STRIPS

CUTS
6P
8P

8P STRIPS
• 8P

Modular plug holder

8P position use

Cutter
Modular plug holder
6P position use

• Wire cutter

KT NO. Overall length g

inch mm
67F1-08 8 203 370 10 / 40

• Wire stripper

• Crimp connector

443
 Ratchet Crimping Tool
67G
▪▪For crimping RG type cable
▪▪CATV "F" connectors
▪▪Interchangeable die

.069 .262 .324 .360

C2

Overall length
Interchangeable die
KT NO. g
inch mm Pressure adjustment
67G 8.7 222 480 1 / 30 for actuation force

Replacement Replacement
Item No. die set
Terminal size Description Item No. die set
Terminal size Description

.068" .262" .324" .360" CATV "F" .075" .100" .128" .429" RG8, 9, 11, 174,
67G1-09 (1.72 6.65 8.23 9.14 Connectors 67GB-09 (1.9 2.54 3.25 10.9 316
mm) RG59, 6 mm) BELDEN 9913
67G1P01 67GBP01

.042" .068" .128" .137"

.068" .213" .356" .319" .151" .178" .187" (1.07
RG58, 59, 62, 6, 67GC-09 RG58, 174,
67G2-09 (1.72 5.41 6.5 8.1 1.72 3.25 3.5 3.84
BELDEN 8279 SMA SMB
mm) 4.52 4.75 mm)
67G2P01 67GCP01

.255

.068" .213" .255" RG58, 59, 62, .068" .255" .324" RG59, 62, 6,
67G3-09 140, 67GD-09
(1.72 5.41 6.48 mm) (1.72 6.48 8.22 mm) BELDEN 8281
BELDEN 8279
67G3P01 67GDP01
.068" .100" .213" .255"
.324" .068" .187" .213" .255"
67G4-09
(1.72 2.50 5.41 6.48 RG58, 59, 62, 6,
67GE-09 (1.72 4.75 5.41 6.48 RG58, 59, 62
mm) 142, 174, 223
67G4P01 8.23 mm) 67GEP01

RG58, 6, 174,
67G5-09 .187" .213" .319" .128" .151" .187" .213" RG58, 174
140 67GF-09
(4.75 5.41 8.1 mm) (3.25 3.84 4.75 5.41 FIBER OPTIC
FIBER OPTIC
67G5P01 mm)
67GFP01

CATV "F" AWG 12 / 14 / 16 / PIN TERMINAL

67G6-09 .255" .320" .350" Connectors 18 / 20 / 22 INSULATED OR
(6.48 8.13 8.9 mm) RG59, 6 67GN-09 0.5 / 0.75 / 1.0 / 1.5 / NON-INSULATED
67G6P01
67GNP01 2.5 / 4.0 mm2 FERRULES
RG58, 174,
.042" .068" .151" BELDEN 8281 PIN TERMINAL
.178".213" FIBER OPTIC INSULATED OR
67G7-09 67GJ-09 AWG 6 / 8 / 10
(1.07 1.72 3.84 4.52 SMA, SMB NON-INSULATED
6 / 10 / 16 mm2
67G7P01 5.41 mm) Connectors FERRULES
67GJP01
.028" .042" .068" .128" AWG 12-10 / 16-14 /
RG58, 174, INTER-LOCKING
67G8-09 .178" 22-18
FIBER OPTIC 67GK-09 &
(0.71 1.07 1.72 3.25 0.5-1.0 / 1.5-2.5 / 4-6
F2 F3 F5 NON-INSULATED
67G8P01 4.52 5.41 mm) 67GKP01 mm2

.043" .068" .100" .137" AWG 12-10 / 8 / 16-14

.213" .255" RG58, 59, 62, / 20-18 NON-INSULATED
67G9-09 174, 140 67GL-09
(1.10 1.72 2.54 3.5 1.5 / 2.5 / 6 / 10 mm2 TERMINAL
5.41 6.48 mm) FIBER OPTIC 67GLP01
67G9P01
AWG 12-10 / 16-14 /
.042" .068" .078" .128" 22-18 FOR INSULATED
RG174, 67GH-09
.151" .178" 0.5-1.0 / 1.5-2.5 / 4-6 TERMINAL
67GA-09 178,179
(1.07 1.72 2.0 3.25 67GHP01 mm2
3.84 4.52 mm) FIBER OPTIC
67GAP01
Unchangeable FOR
67GG-09 AWG 12-10 / 16-14 / 22-18 INSULATED
0.5-1.0 / 1.5-2.5 / 4-6 mm2 TERMINAL

444
Ratchet Crimping Tool Set
67G0005
67G0005US
5
PC.

Kg
1 1 / 16
Replacement
Item No. die set
Terminal size Description
AWG 12 / 14 / 16 / 18 / PIN TERMINAL
20 / 22 INSULATED OR
67GN-09 0.5 / 0.75 / 1.0 / 1.5 / 2.5 NON-INSULATED
67GNP01 / 4.0 mm2 FERRULES
PIN TERMINAL
AWG 6 / 8 / 10 INSULATED OR
67GJP01 NON-INSULATED
6 / 10 / 16 mm2
FERRULES
AWG 12-10 / 16-14 / INTER-LOCKING
22-18 &
67GKP01
0.5-1.0 / 1.5-2.5 / 4-6 NON-INSULATED
mm2
AWG 12-10 / 8 / 16-14
/ 20-18 NON-INSULATED
67GLP01
1.5 / 2.5 / 6 / 10 mm2 TERMINAL

AWG 12-10 / 16-14 /

22-18 FOR INSULATED
67GHP01
0.5-1.0 / 1.5-2.5 / 4-6 TERMINAL
mm2

445
 Crimping Tools
6721-10
▪ Wire cutter
▪ Crimps insulated terminals
▪ Bolt cutter
▪ Crimps non-insulated terminals (Open barrel)
▪ Wire stripper
FUNCTION:

• Wire cutter • Open barrel • Non-Insulated • Bolt-cutter • Insulated terminal • Wire stripper
terminal crimping terminal Crimping Crimping

Wire cutter Insulated terminal Non insulated Open barrel Wire stripper g
KT NO. Bolt-cutter
Ø mm2 crimping termind crimp terminal crimping mm2
6721-10 6 0.5~6 M2.6~5 0.5~6 1.5~6 0.75~6.0 248 5 / 50

6732-09
▪ Wire cutter
▪ Crimps insulated terminals
▪ Bolt cutter
▪ Crimps non-insulated terminals (Ring)
▪ Wire stripper

FUNCTION:

• Wire cutter • Insulated terminal • Bolt-cutter • Wire stripper • Non-insulated ring

Crimping terminal crimping

Wire cutter Insulated terminal Non-insulated ring Wire stripper g

KT NO. Bolt-cutter
Ø mm2 crimping terminal crimping mm2
6732-09 6 1.5~6 M2.6~5 1.5~6 0.75~6.0 261 24 / 72

6741-06
▪ Wire cutter
▪ Wire stripper
FUNCTION:
0. 5
1. 75
0.
0.5

2.0 25
5
0.7
5
1.2
2.0
3.5

3.5
5.5

5.5
1.25
0.75

5.5
3.5
2.0
0.5

• Wire cutter • Wire stripper • Peel the electric wire’s

shell
Wire cutter Wire stripper g
KT NO. Ø mm2 mm2
6741-06 6 0.5~5.5 103 10 / 100

446
Interchangeable Ratchet Crimping Tool Set
42107GX
▪ Quick interchangeable ratchet function & easy
to use 7
▪ Crimping jaws with heat treatment PC.

CONTENTS :
• A : Insulated Terminal : 0.5 to 6mm²
• B : Non-Insulated Terminal : 1.5 to 10mm²
• C : Open Barrel Terminal : 0.5 to 6mm²
• D : Insulated Core-end Terminal : 0.5 to 4mm²
• F : Insulated Huge Core-end Terminal : 6 to 16mm²
• H : Open Barrel & D-Sub, V.35 Connectors : 0.5 to 10mm²

g
1163.8 1 /10

447
 Heavy Duty Crimping Tool
6AC51-22
▪ For cable lugs from 10mm2-120mm2 with
non-ratchet screw adjustment

Crimping capacity
Overall length g
AWG 8 6 4 2 1/0 2/0 3/0 4/0
KT NO. mm JIS(mm2) 8 14 22 38 60 70 80 100
6AC51-22 570 2996 1/5 DIN(mm2) 10 16 25 35 50 70 95 120

6AC51-26
▪ For cable lugs from 10mm2-150mm2 with non-ratchet screw adjustment

Crimping capacity
AWG 8 6 4 2 1/0 2/0 3/0 4/0 300MCM
JIS(mm2) 8 14 22 38 60 70 80 100 150
DIN(mm2) 10 16 25 35 50 70 95 120 150

Overall length g
KT NO. mm
6AC51-26 665 3900 1/5

448
Crimping Tool for Non-insulated Terminal
6AC52
▪ Ratchet designed. For non-insulated terminals
AWG 16 14 10 8 6
JIS mm21.25 2 5.5 8 14
Item No.
DIN mm2 1.5 2.5 6 10 16

6AC52-11
6AC52-12

Overall length g
KT NO. inch mm
6AC52-11 10-1/2 270 480 6 / 24
6AC52-12 12 300 520 6 / 24

• Distribution box

449
 HAMMERS &
STRIKING TOOLS
▪ Hammer

▪ Punch

▪ Flat Chisel

▪ Marking Punch

450
451
 Hammer
Please wear proper safety gear while working.

7811
▪ American style L

▪ Forged and hardened steel

▪ Wood and metal wedge

H
▪ GGG-H86C
A
H.W A H L g
KT NO. g LB oz mm mm mm
7811-08 245 1/2 8 25 80 300 375 6 / 60
7811-12 370 3/4 12 29 93 300 485 6 / 48
7811-16 485 1 16 32.5 103 353 640 6 / 36
7811-24 765 1-1/2 24 35.5 122 405 975 6 / 24
7811-32 925 2 32 40.5 125 405 1200 6 / 24
7811-40 1125 2-1/2 40 42.2 133 405 1395 6 / 12

7821 7823
7821: 7823:
▪ German style ▪ Engineer's hammer
L
▪ Forged and hardened steel ▪ DIN1041
▪ Wood and metal wedge
H

▪ DIN 1041
A
H.W A H L g
KT NO. g mm mm mm
7821-30 395 23 103 300 400 12 / 48
7821-50 615 27 120.5 320 660 6 / 36
7821-80 990 33 130 350 960 6 / 24
7823-10 1000 36 135 360 1121 9 / 18
7823-15 1500 42 145 380 1606 6 / 12
7823-20 2000 47 155 400 2106 6 / 12

7822
▪ Riveting hammer L
B
▪ NF E71-016
H

A
H.W A B H L g
KT NO. g mm mm mm mm
7822-25 315 25 22 85 280 489 10 / 40
7822-30 400 30 26 95 300 650 10 / 40
7822-35 630 35 31 105 300 1000 9 / 36
7822-40 800 40 35 115 320 1330 8 / 16
7822-45 1250 45 40 124 355 1790 8 / 16
7822-50 1600 50 44 135 382 2458 6 / 12

7833
L
▪ Lump hammer
▪ DIN 6475
H

H.W A A
H L g
KT NO. g mm mm mm
7833-10 1000 40 95 260 1065 7 / 14
7833-12 1250 43 100 260 1425 6 / 12
7833-15 1500 45 110 280 1778 6 / 12
7833-20 2000 50 120 300 2142 4/8

452
Hammer
Please wear proper safety gear while working.

7834
▪ Sledge hammer
▪ Fiberglass handle L

B H

H.W A B H L g
KT NO. g mm mm mm mm
7834-50 5000 66 66 160 895 5930 1/2

7852
▪ Rubber hammer L
▪ Fiberglass handle
H

H.W A H L g
KT NO. g mm mm mm
7852-23 1650 69.5 142 500 2000 4 / 12
7852-55 4500 104 198 910 5500 2/4

7861
▪ Fiberglass claw hammer
L

HW A H L g
KT NO. oz g mm mm mm
7861-16 16 450 30 133 335 740 4 / 24
7861-20 20 565 31 144 340 830 4 / 24
7861-24 24 680 32 147 380 920 10 / 20

7848
▪ Rubber hammer
L
▪ Feature: used to lay basalt floors, tires and
other materials which are vulnerable
H

H.W A H L g
KT NO. g mm mm mm
7848-60 523 64 119 330 628 6 / 12
7848-80 821 79 119 350 979 5 / 10

453
 Hammer Please wear proper safety gear while working.

7851
▪ Dead blow hammer L

H
A
H.W A H L g
KT NO. g mm mm mm
7851-08 227 43 81 272 585 6 / 24
7851-16 454 46 100 304 849 6 / 24
7851-24 680 49 100 322 884 6 / 24
7851-32 907 55 100 342 1090 6 / 24
7851-40 1134 58 110 342 1218 6 / 24
7851-48 1361 61 123 355 1511 6 / 12
7851-64 1814 67 136 368 1874 6 / 12

7842
▪ Soft face hammer
▪ Replaceable polyure thane face L

▪ Helps minimize marring and surface

damage
H

A H L g
KT NO. mm mm mm
7842-22 22 75 255 110 10 / 40
7842-28 28 85 295 165 10 / 40
7842-35 38 100 325 305 8 / 32
7842-45 45 112 335 420 8 / 32
7842-60 60 135 380 895 6 / 12

915
▪ Spare faces for item 7842
▪ In soft 75° and hard 90°
A

Hardness A g
KT NO. (shore A) mm
91522H/S 90° / 75° 22 11 10 / 160
91528H/S 90° / 75° 28 24 10 / 100
91535H/S 90° / 75° 38 36 6 / 120
91545H/S 90° / 75° 45 65 6 / 36
91560H/S 90° / 75° 60 123 6 / 12

Hammer Hook
Please wear proper safety gear while working.

91431
▪ Overall Size -
W 40 x D 210 x H 240 mm
▪ Weight - 411.6 g / Cuft - 0.072

454
Chisel & Punch & Set
• Material - chrome vanadium alloy steel
• Finishing - phosphate sunk Please wear proper safety gear while working.

761 Center punch 762 Flat chisel

L L

A
Ø

Ø L g A L g
KT NO. KT NO.
mm mm mm mm
76103-04 3 100 34 12 / 336 76213-04 13 100 69 12 / 336
76104-05 4 120 59 12 / 336 76215-05 15 125 70 12 / 336
76105-06 5 150 116 12 / 144 76217-06 17 150 145 12 / 144
76220-07 20 175 300 12 / 144
763 Starter punch 76223-08 23 200 300 12 / 72
L 76224-10 24 250 388 4 / 40
76226-12 26 300 650 4 / 32
Ø

KT NO. Ø
mm
L
mm
g 764 Pin punch
L
76301-05 1 120 57 12 / 336
76302-05 2 120 58 12 / 336 Ø
76303-05 3 120 60 12 / 336
Ø L
76304-05 4 120 60 12 / 336 KT NO. g
mm mm
76305-05 5 120 64 12 / 336
76402-45 2 115 32 10 / 640
76306-05 6 120 64 12 / 336
76403-05 3 125 34 10 / 640
76307-05 7 120 100 12 / 240
76403-06 3 150 43 10 / 250
76308-05 8 120 100 12 / 240
76404-06 4 150 60 10 / 250
76309-06 9 150 130 12 / 144
76405-65 5 165 71 10 / 280
76310-06 10 150 132 12 / 144
76406-07 6 180 125 10 / 150
76408-08 8 200 130 10 / 120
765 Cape chisel 76410-85 10 215 155 12 / 120
L
76412-09 12 230 356 10 / 80
76414-10 14 250 502 6 / 48
Ø

Ø L g
KT NO. mm mm
76505-05 2.6 132 70 12 / 192

► PRN : Tetoron pouch bag

► PR : Nylon pouch bag

Kg
KT NO. PC. Contents Package
1006PR 6 Nylon
Ø 2 x 30, Ø 3 x 40, Ø 4 x 50, Ø 5 x 50, Ø 6 x 50, Ø 8 x 50 0.57 1 / 20
1006PRN 6 Tetoron
1009PR 9 764 Ø 2 x 30, Ø 3 x 40, Ø 4 x 50, Ø 5 x 50, Ø 6 x 50, Ø 8 x 50, Nylon
1.67 1 / 12
1009PRN 9 Ø10 x 65, Ø12 x 70, Ø14 x 75 Tetoron
761 Ø 3 x 100, Ø 4 x 120, Ø 5 x 150

1010PR 10 763 Ø 3 x 120, Ø 6 x 120, Ø 8 x 120 Nylon 0.86 1 / 24

764 Ø 3 x 40, Ø 4 x 50, Ø 5 x 50, Ø 6 x 50

455
 Flat Chisel & Punch Set
1090PR1
▪▪Flat chisel & punch set
Each Kg
90
KT NO. Contents Cuft PC.
Q'ty

Ø 4 x 120, Ø 5 x 150
761
17 x 150, 20 x 175, 23 x 200,
762 24 x 250 mm

1090PR1 4 x 120, 8 x 120 mm 6 13.5 0.34'

763
Ø 3 x 40, Ø 4 x 50, Ø 5 x 50,
764 Ø 6 x 50, Ø 10 x 65

150 , 200 mm
767
Shelf size (mm) : 600 x 240 x 290
8711B 600 x 240 x 60 mm 1 6.2 0.9'

8711B-1 600 x 232 x 230 mm 1 2.0 1.7'

Please wear proper safety gear while working.

Sheathed Chisel & Pin Punch • Material – chrome molybdenum alloy steel
• Finishing - phosphate sunk
• Safe and comfortable grip

761-G Sheathed center punch 762-G Sheathed flat chisel

L L

Ø
A

Ø L g
KT NO. mm mm A L g
KT NO. mm mm
76125-74G 2.5 185 104 12 / 144
76104-74G 4 185 110 12 / 144 76218-75G 18 190 180 10 / 100
76106-74G 6 185 112 12 / 144 76219-75G 19 190 180 10 / 100
76108-74G 8 185 179 12 / 120 76220-84G 20 210 269 8 / 80
76110-74G 10 185 169 12 / 120 76222-84G 22 210 271 8 / 80

763-G Sheathed starter punch 764-G Sheathed pin punch

L
L

Ø
Ø
Ø L g
Ø L KT NO.
KT NO. g mm mm
mm mm
76402-55G 2 140 50 12 / 384
76302-74G 2 185 104 12 / 144
76403-06G 3 150 54 12 / 384
76303-74G 3 185 105 12 / 144
76404-07G 4 180 94 12 / 144
76304-74G 4 185 107 12 / 144
76405-08G 5 200 108 12 / 144
76305-74G 5 185 112 12 / 144
76406-84G 6 210 157 12 / 120
76306-74G 6 185 115 12 / 144
76407-84G 7 220 165 12 / 120
76308-74G 8 185 162 12 / 120
76408-88G 8 220 175 12 / 96
76409-88G 9 230 184 12 / 96
76410-09G 10 250 259 10 / 80
76412-10G 12 290 340 8 / 64
76414-11G 14 350 443 6 / 48
76416-12G 16 310 593 6 / 36
76410-14G 10 350 363 10 / 60
76412-14G 12 350 470 6 / 36
76414-14G 14 350 518 6 / 36
76416-14G 16 350 664 5 / 30

456
Sheathed Chisel & Pin Punch Set

► Pouch material : Tetoron

Kg
KT NO. PC. Contents
1014GPN 4 Ø 10 x 350, Ø 12 x 350, Ø 14 x 350, Ø 16 x 350 2.13 1/8
1006GPN 6 Ø 2 x 140, Ø 3 x 150, Ø 4 x 180, Ø 5 x 200, Ø 6 x 210, Ø 8 x 220 0.80 1/8
764 Ø 2 x 140, Ø 3 x 150, Ø 4 x 180, Ø 5 x 200, Ø 6 x 210, Ø 8 x 220,
1009GPN 9 1.82 1 / 12
Ø 10 x 230, Ø 12 x 250, Ø 14 x 290

Automatic Center Punch

768
▪ Material : handle - brass, tip - S2
▪ Spring-loaded trigger design for useing without
L
a hammer
Ø L g
KT NO. mm mm Ø
76804-05 1.3 130 75.0 30 / 120
76807-06 1.7 155 141.7 30 / 120

Flat Chisel & Set

767 11104PR
▪ Ribbed type
4
PC.
A B

A B L g
KT NO. mm mm mm
76717-05 17 12.6 125 90 12 / 240
76721-06 20 16.0 150 130 12 / 144 Kg
1.37 1 / 10
Contents
76724-08 25 19.0 200 280 12 / 72
76717-05 17 x 125
76729-10 29 22.3 250 480 8 / 48
76721-06 20 x 150
76724-08 25 x 200
11104PR10 76729-10 29 x 250

87108
4
PC.
87108
L
▪ Acrylic display stand

Kg
Contents 1.0 1 / 20
H

76717-05 17 x 125
76721-06 20 x 150
H L g
76724-08 25 x 200 KT NO. mm mm
76729-10 29 x 250
87108 140 160 410 12

457
 Marking Punch
Please wear proper safety gear while working.

11409SQ 11427SQ
▪ Chrome vanadium alloy steel
9 27
▪ Hardened and tempered control HRC60 for PC. PC.
safe use
▪ Invert number 6 to be number 9 (For 11409SQ)
▪ The letter A~Z with extra "&" (ampersand)
included (For 11427SQ)

11409SQ05 11427SQ05
11409SQ08 11427SQ08

H Squre L
KT NO. Contents Kg
mm inch mm mm
11409SQ05 5.0 3/16" 9 PCS 8x8 61 0.28 1 / 80
11409SQ08 8.0 5/16" 0~9 12.7 x 12.7 71 0.78 1 / 30
11427SQ05 5.0 3/16" 27 PCS 8x8 61 0.82 1 / 30
11427SQ08 8.0 5/16" A~Z, & 12.7 x 12.7 71 2.33 1 / 10

Heavy Duty Marking Punch

11509SQ 11527SQ
▪ Chrome vanadium alloy steel
9 27
▪ Hardened and tempered control HRC60 for PC. PC.
safe use
▪ Hardness reduced at striking end HRC40 to
have longer life time
▪ Invert number 6 to be number 9 (For 11509SQ)
▪ The letter A~Z with extra “&” (ampersand)
included (For 11527SQ)
11509SQ05 11527SQ05

H Squre L
KT NO. Contents Kg
mm inch mm mm
9 PCS
11509SQ05 5.0 3/16" 11 x 11 61 0.56 1 / 30
0~9
27 PCS
11527SQ05 5.0 3/16" 11 x 11 61 1.70 1 / 10
A~Z, &

458
459
 WORKSHOP TOOLS
▪ Puller

▪ Riveter

▪ Measuring Tools

▪ KING TONY Tools for Working

at Height

▪ Work Lamp

▪ Bench Vise

▪ Damaged Screws, Nuts, Bolts

Remover Tools

▪ Bolt Cutter

▪ Snips

▪ Saw

▪ File

▪ Tap Holder

▪ Threaded Coil-Insert Repair

Set

▪ Tap & Die Set

460
461
 Gear Puller
• Material - chrome vanadium alloy steel
• Finishing - chrome plated & phosphate sunk

7962
▪ Two-Jaw gear puller

Capacity HEX Jaw Spread Reach Kg

KT NO.
(tons) (mm) (leg) (A)mm (B)mm
7962-03 0.5 14 2 85 60 0.44 1 / 40
7962-04 1 17 2 110 95 0.78 1 / 20
7962-06 4 19 2 160 160 1.65 1 / 10
7962-08 7 23 2 210 235 3.50 1/5

B
7962-12 10 32 2 310 330 7.00 1/2 A

7963
▪ Three-Jaw gear puller

Capacity HEX Jaw Spread Reach Kg

KT NO.
(tons) (mm) (leg) (A)mm (B)mm
7963-03 0.5 14 3 85 60 0.55 1 / 40
7963-04 1 17 3 110 95 1.06 1 / 20
7963-06 4 19 3 160 160 2.25 1 / 10
B
7963-08 7 23 3 210 235 4.50 1/5
7963-12 10 32 3 310 330 11.00 1/2 A

7962B
▪ Two-Jaw gear puller
▪ Adjustable sliding arm for efficiency and safety
▪ Reversible jaws for internal & external options gear,
axle, bearing, etc…

Capacity Hex Jaw Reach B C Spread Spread E Kg

KT NO.
(tons) (mm) (leg) A(mm) (mm) (mm) D1 (mm) D2(mm) (mm)

7962B-35 2.0 17 2 100 3.8 14.5 90 60~125 21 1.05 1/12

7962B-05 3.0 17 2 100 3.8 14.5 130 60~160 21 1.15 1/12
7962B-06 3.0 22 2 150 4.6 23.0 150 85~200 30 2.98 1/6
7962B-08 5.0 22 2 150 4.6 23.0 190 105~230 30 3.41 1/6
7962B-10 5.0 27 2 210 7.0 30.0 240 130~300 35 7.11 1/3

462
Slide Hammer Gear Puller Set
796401MR
Slide Hammer Puller Set
▪ For jobs involving pull and grip gears, bearings, 6
PC.
outer races, grease retainers, oil seals, etc.
▪ 2.6 lbs(1.2 kgs) slide hammer
▪ 400 mm length T-handle puller
▪ 3-in-1 hammer puller, to handle inside pull such
as bearing cups and outer races, as well as
regular outside pull jobs
kg 4.5 1/4

KT NO. Items D (mm) Capacity CONTENTS:

• 1PC. 400 mm T handle shaft
796401P021 Internal gear puller 6 Ø 15-30mm • 1PC. 2.6 Ibs / 1.2 kgs hammer
• 1PC. Adjustable nut
796401P022 Internal gear puller 10.5 Ø 30-80mm
• 1SET Internal gear puller for Ø15-30mm(A)
796401P023 External gear puller 10.5 Ø 15-80mm • 1SET Internal gear puller for Ø30-80mm(B)
• 1SET External gear puller for Ø15-80mm(C)

Riveter
79711
▪ Stainless steel riveter nozzles
▪ Drop-forged aluminum body
▪ Heavy duty riveter for stainless or aluminum rivets
L Capacity kg
KT NO.
inch mm inch mm
1/8 Ø 3.2 Ø 3.2~6.4mm
5 / 32 Ø 4.0
79711 18 460 1.48 1 / 12
3 / 16 Ø 4.8
1/4 Ø 6.4

Expander Riveter
79721
▪ Expander framework design to press riveter
▪ 4 PC. Interchangeable nozzles
▪ Heavy duty riveter for stainless or aluminum rivets

3.2mm (1/8") 2.4mm

4.0mm (5/32") 2.8mm
4.8mm (3/16") 3.2mm L / min

6.4mm (1/4") 4.1mm

L
KT NO. (min) (max) kg
mm inch mm inch
79721 315 12-1/2 870 34-1/4 2.00 1 / 10
L / max

463
 Riveter
21-20-101
▪ Stainless steel riveter nozzles
▪ Drop-forged aluminum body
L Capacity g
KT NO.
inch mm inch mm
3 / 32 Ø 2.4
1/8 Ø 3.2
21-20-101 10-1/4 260 588 12 / 24
5 / 32 Ø 4.0
3 / 16 Ø 4.8 Ø 2.4~4.8mm

21-20-102
▪ 4 changeable sizes
▪ Stainless steel riveter
▪ The driver can be used in 90° and 180°

L Capacity g
KT NO.
inch mm inch mm
360°

3 / 32 Ø 2.4
1/8 Ø 3.2
21-20-102 11 278 778 6 / 24
5 / 32 Ø 4.0
3 / 16 Ø 4.8

21-20-07MR

Contents Kg
1.06 1 / 16 Each
Q'ty

4 x 8 mm 4 x 10 mm
4 x 8 mm 4 x 10 mm 20
4.8 x 8 mm 4.8 x 10 mm
21-20-101 1

Blow case size (mm) :

Blind Nut Riveter

276 x 160 x 46(0.122 cuft)

21-30-09MR
▪ Designed for fastening object to thin metal
▪ 4 PC. interchangeable mandrels (M4, M5, M6, M8)
85
PC.
▪ 80 PC. iron nut rivet
CONTENTS:

M4 x 0.7 x 20 PC. M4 x 0.7

M5 x 0.8 x 20 PC. M5 x 0.8
M6 x 1.0 x 20 PC. M6 x 1.0
M8x 1.25 x 20 PC. M8x 1.25

L g
KT NO.
inch mm

21-30-09MR 10-1/2 265 1320 1/12

464
Measuring Tape
• Auto-Lock measuring tape
• Two retrieval buttons
• Nylon coating 3-rivet blade
• Ergonomic & shockproof ABS+TPE case
• Specially red marked each 10cm scale
• EU Class II accuracy standard approval

79093
L B g
KT NO. 3 4
B
M / FT mm 1

79093-02M 2M 16 110 16 / 64
79093-03M 3M 16 137 16 / 64
79093-05M 5M 19 210 14 / 56
79093-05M1 5M 25 260 12 / 48
79093-08M 8M 25 420 12 / 48
79093-03C 3M/10FT 16 137 16 / 64
79093-05C 5M/16FT 19 210 14 / 56
79093-08C 8M/26FT 25 420 12 / 48

79094
▪ Magnetic hook
L B g
KT NO.
M / FT mm
79094-02M 2M 16 110 16 / 64
79094-03M 3M 16 137 16 / 64
79094-05M 5M 19 210 14 / 56
79094-08M 8M 25 420 12 / 48
79094-03C 3M/10FT 16 137 16 / 64
79094-05C 5M/16FT 19 210 15 / 60
79094-05C1 5M/16FT 25 260 12 / 48
79094-08C 8M/26FT 25 420 12 / 48

Paper Display Stand for Measuring Tape

87118
▪ Capacity: 12 PC.
▪ For all measuring tape (79093 / 79094 <02M,03M,05M>series)
▪ Paper display stand size(mm): 309 x 237 x 189 (0.489 CUFT)

87118

465
 Measuring
79062
▪ Adjustable square measuring with angle spirit
level 305mm
▪ Sliding combination of square, spirit level, height
gauge and steel rule
▪ 90° and 45° level allow try-square and metre-
square work
▪ Metal scriber pin in the end
▪ Metric and imperial marking at both sides
▪ Precision cast zinc alloy and stainless blade
▪ For woodwork
L g
KT NO.
mm inch
79062-12 305 12 312 12 / 72

Stainless Ruler
79063
▪ Stainless steel deeply etched for easy reading
▪ Dual scale: metric & imperial marking (mm/inch)

L W T

W
KT NO. g L
mm inch mm mm
79063-06 150 6 14.7 0.6 12 100 / 1500 T

79063-12 300 12 23.7 1.0 65 20 / 400

79063-20 500 20 28.5 1.2 145 10 / 160
79063-40 1000 40 35.0 1.2 360 10 / 80

Calipers
77121
▪ Vernier calipers with fine adjustment and nib jaws
▪ Inside and outside measurement can be read
directly from jaw
05 10 10
5 22 5 00
.10 in

0
0 12
12 34 56 789
12

34
1 1 2 3 4 5 6 7 8 9 2 12 34 596 78
34

5 6 78 9 0
5
00
.2
67
mm
3 162 3 4 5
8 9
798
4 12 34 5
10 11
HXS

▪ Dual scale: metric & imperial marking (mm/inch)

A

▪ The calipersis made of hardened stainless steel

B

A B max Vernier HxS g

KT NO.
mm mm inch mm inch mm
77121-08 60 200 8 0.02 0.001 20 x 4 860 1 / 10

77131
▪ Vernier calipers parallax free
▪ Parallax free bevel scales for easy and accurate
measurement 04 1 2
. 2 mm
00
3 56 789
HXS
▪ 4 way measurement capability for outside, inside,
0 1 23 4 56 7890
A

depth and step measarements

▪ The caliperis made of hardened stainless steel
B
A B max Vernier HxS g
KT NO.
mm mm mm mm
77131-06 40 150 0.02 16 x 3 320 1 / 50
77131-08 50 200 0.02 20 x 4 450 1 / 50

466
Calipers
77141
▪ Digital calipers
▪ Digital display slide calipers with thumb roller
▪ Large clear LCD on/off, metric/imperial, zero switches mm inch HOLD

5 6 78 9
3 1 2 34 5

▪ Hold function allows quick and efficient inspection

70 80 90

OFF ON ZERO

record

A
▪ Made of hardened stainless steel
B
A B max Resolution g
KT NO.
mm mm inch mm inch
77141-06 40 150 6 0.01 0.001 320 1 / 20
77141-08 50 200 8 0.01 0.001 485 1 / 50

Metric Feeler Gauge

• Material: blade made of spring steel

77340-20
▪ 20 blades metric feeler gauge

Number Width x Length g

KT NO. Contents 105 50 / 200
of blades of blades (mm)
0.05, 0.10, 0.15, 0.20, 0.25, 0.30,
0.35, 0.40, 0.45, 0.50, 0.55, 0.60,
77340-20 20 10 x 100
0.65, 0.70, 0.75, 0.80, 0.85, 0.90,
0.95, 1.00 mm

77335-25
▪ 25 blades metric feeler gauge

Number Width x Length g

KT NO. Contents 110 50 / 200
of blades of blades (mm)
0.04, 0.05, 0.06, 0.07, 0.08, 0.09,
0.10, 0.15, 0.20, 0.25, 0.30, 0.35,
77335-25 25 13 x 85 0.40, 0.45, 0.50, 0.55, 0.60, 0.65,
0.70, 0.75, 0.80, 0.85, 0.90, 0.95,
1.00 mm

77328-26
▪ 26 blades inch feeler gauge
Number Width x Length g
KT NO. Contents 91 14 / 168
of blades of blades (mm)
0.0015", 0.002", 0.0025", 0.003",
0.004", 0.005", 0.006", 0.007",
0.008", 0.009", 0.010", 0.011",
0.012", 0.013", 0.014", 0.015", 0.016",
0.017", 0.018", 0.019", 0.020", 0.021",
0.022", 0.023", 0.024", 0.025"
77328-26 26 12.7 x 76
0.038, 0.051, 0.063, 0.076, 0.102,
0.127, 0.152, 0.178, 0.203, 0.229,
0.254, 0.279, 0.305, 0.330, 0.356,
0.381, 0.406, 0.432, 0.457, 0.483,
0.508, 0.533, 0.559, 0.584, 0.610,
0.635 mm

467
 Roller Chain Detacher
3214

For chain size g

KT NO.
mm
3214-35 35~50 310 1 / 60
3214-60 60~100 691 1 / 20

KING TONY Tools for Working at Height

Worker safety plays paramount role, particularly for who works at height. KING TONY Tools at Height are simple anti-
drop solutions to prevent tools from falling. It can avoid the risk of dropped tools to hurt people, causing damage and
disrupting work.
It's applicable in drilling derricks, wind turbines, cranes, buildings, scaffolds, bridges, telecom masts, power lines,
hangars, overhead gantries, nuclear fuel rod cooling ponds, water filter beds, underground mining shafts where safety is
a major concern.

79A21-30 79A22-30
▪ Retractable tool lanyard
▪ 3 kgs maximum tool weight
▪ Nylon tether with steel spring inside to absorb
the shock of a dropped tool
▪ Increases safety and productivity
▪ Ergonomically designed length
Capacity g
KT NO. Hook
mm
79A21-30
79A21-30 800~1300 2 lock snaps 106 12 / 144
79A22-30 800~1300 fixed loop 89 12 / 144
Max height

Double maximum
tool weight

x2

Anchor point 79A22-30

• The retractable tool lanyards are developed

according to KING TONY standard. The steel lanyards
are tested by double maximum weight and dropped
from height. Product quality is approved.

Extended
length

Quality test

468
3W COB + 5 LED Lamp
9TA27
▪▪3W COB + 5 LEDs (top) 300 4h

▪▪Brightness : 300 Lumen (lm), white light color, kelvin : 7200K Lumen 3W

▪▪Materials : ABS+PS 5.0V Li-ion

▪▪180° magnetic swivel base + 360° functional hook USB 1000mA
2600 mAh
3.7V
4.5h
▪▪Rechargeable battery : 3.7V - 2600mAh Li-ion
▪▪Accessory : USB charging cable
▪▪4 hours continuous light, charge times : 4.5 hours 3W

Battery status indicator USB charger port

light

Contents
180°
3W COB + 5 LED
x 1 PC.
rechargeable work lamp
USB CABLE x 1 PC.
L g 180° swivel base Top light with 5 LED
KT NO.
mm

9TA27 220 236.0 1 / 40

3 + 1 LED Work Lamp with Magnetic Swivel Base

9TA24
▪▪High power LEDs: 9 W (main) + 3 W (top)
▪▪Brightness: 282 Lumen(lm)
▪▪60° magnetic swivel base + 360° functional hook
▪▪IP65 shockproof housing + waterproof coating
▪▪Rechargeable battery: 3.6V – 2300mAh Li-ion
▪▪AC 100~240V 50/60Hz EU battery charger
60°
▪▪DC 12~24V car battery charger

Contents
60° Magnetic swivel base Main light with
3+1 LED rechargeable unbreakable lens +
x 1 PC. 3 powerful LEDs
work lamp

AC charger x 1 PC.

KT NO. Suitable country Top light with 1 powerful Battery status indicator
LED light

9TA24A Europe 1 / 20

9TA24B America & Asia 1 / 20

9TA24D Australia & New Zealand 1 / 20

469
 Slim Inspection Lamp & Set
9TA26
▪ 11 mm thickness adjustable light 15W COB LED
▪ Brightness: 410 Lumen (lm)
▪ Magnetic swivel base with functional hook
▪ Rechargeable battery: 3.7V-2300mAh Li-ion
▪ Power adaptor AC 100-240V
11mm
▪ USB Changer 5V, 1000mA
▪ 5 hours (Normal) 2.5 hours (Boost) lighting
▪ Changer Time: 3.5~4.0 hours
▪ Waterproof grade: IP 54

L Kg Contents
KT NO. Suitable country
mm

COM LED LAMP x 1 PC.

9TA26A 375 Europe 0.39 1 / 12
9TA26B 375 America & Asia 0.39 1 / 12 USB CHARGER 9TA26P02 x 1 PC.

9TA26D 375 Australia & New Zealand 0.38 1 / 12 USB CABLE 9TA26P03 x 1 PC.

9TA26A-S
Paper display stand size(mm):
330 x 160 x 520 (0.969CUFT) 6
Kg
PC.
Contents

9TA26A 8.03 1/3

470
Flexible LED Lamp
9TA25
▪▪5W High lightness LED lamp 390
▪▪Brightness : 390 Lumen(lm)
▪▪Rechargeable battery : 3.7V-2300mAh-Li-ion
▪▪Power adaptor AC 100-240V
▪▪USB changer 5V, 1000mA 300
▪▪Battery power status indicator
▪▪360 degrees of rotation
▪▪Built-in magnet
▪▪Waterproof grade: IP54

Contents

LED LAMP x 1 PC. Adjustable focus

USB CHARGER x 1 PC.

USB CABLE x 1 PC.

L g
KT NO. Suitable country
inch mm

9TA25A 12 300 Europe 300 1 / 20

9TA25B 12 300 America & Asia 300 1 / 20

9TA25D 12 300 Australia & New Zealand 300 1 / 20

12W SMD LED Adjustable Lamp

9TA31
▪▪60 PC. SMD LEDs
1200 2h
▪▪Brightness : 1200 Lumen (lm), white light color, kelvin : 7000~7800K Lumen 12W
▪▪Materials : ABS+PC
Li-ion
▪▪Two step adjustable light AC
2600 mAh
7.4V
4.5h
▪▪Hidden hook and magnetic adsorption
▪▪Rechargeable battery : 7.4V - 2600mAh Li-ion
▪▪ Accessory: AC 100~240V, 50/60Hz EU battery charger, DC 12V
cigarette plug charger
300°
▪▪2 hours continuous light, charge times : 4.5 hours
Adjustable light Two step adjustable light

170°

Magnetic swivel base body swivel knot

Contents

12W SMD LED

x 1 PC.
rechargeable work lamp

AC charger x 1 PC.

DC Car charger x 1 PC.

L g
KT NO. Suitable country
mm

9TA31A 760 Europe 790 1/8

9TA31B 760 America & Asia 790 1/8

471
 30W Wired COB LED Floodlight
9TA42
▪ 30W COB LED floodlight with portable handle 3000
▪ Brightness: 3000 Lumen (lm), white light color, kelvin: 6000~7000K Lumen 30W
▪ IP54 aluminum housing + waterproof coating
IP 54
▪ Slim profile with lockable adjustment and 180° swivel base 1.8M
▪ Option to wall mount or tripod stand at work sites
▪ Accessory: AC adapter cable 1.8M

Lock button

Swivel base
30W COB 3000 lm

ON/OFF switch
AC cable

LxHxW g
KT NO. Suitable country
mm

9TA42A 238x270x46 Europe 1239 1/6

9TA42B 238x270x46 America & Asia 1239 1/6

1.5W COB +1 LED Lamp

9TA28
▪ 1.5W COB + 1W LED
145 2h
▪ 180° magnetic swivel base + 270° magnetic swivel clip Lumen 1.5W
▪ Rechargeable battery : 3.7V - 800mAh Li-ion
▪ Accessory: USB charging cable 5.0V Li-ion
800 mAh
USB 1000mA
▪ Overcharge/Discharge protection 2h
3.7V

▪ Materials: ABS+PC
▪ 2 hours continuous light, charge time: 2 hours
▪ Brightness: 145 Lumen (lm), white light color, kelvin: 7200K

180°
180° swivel clip magnetic base USB charger port Top light with 1 LED
270°

Contents

1.5W COB + 1 LED Magnetic swivel clip

x 1 PC.
rechargeable work lamp
USB CABLE x 1 PC.

L g
KT NO.
mm

9TA28 180 160 12 / 48

472
LED Pocket Torch
79814
▪ 1W High performance LED pocket torch 30 AA 6.0h
▪ Brightness: 30 Lumen(lm) Lumen 1W
x1

▪ Aluminum alloy body with keychain

▪ Operates using 1 x AA battery (not included)
▪ 6 hours (normal) lighting

LxØ g
KT NO.
mm
79814 98 x 21 31 10 / 120

79815
▪ 3W High performance LED adjustable focus pocket torch ZOOM 120 AAA 6.5h
▪ Brightness: 120 Lumen(lm) Adjust Strobe Lumen 3W
x3

▪ Strobe warning lights for maximize visibility

▪ Aluminum alloy body, safety lanyard included
▪ Operates using 3 x AAA batteries (not included)
▪ 6.5 hours (normal) lighting
LxØ g
KT NO.
mm
79815 128 x 28 95 1 / 100

79831
▪ Pen light with 6 PC. SMD(surface-mount devices) LED
135 AAA
▪ Brightness:135 Lumen(lm) Lumen 3W
x3

▪ ABS body 360 degree rotation LOCK

▪ PE lampshade: avoid nebulization
▪ Operates using 3 x AAA batteries (not included)
OPEN

LxWxH g
KT NO.
mm
79831 165 x 25 x 30 58 10 / 120
Swivel Clip

79832
▪ Pen light with 1 PC. 5W COB(chip on board) 230 AAA
▪ Brightness:230 Lumen(lm) Lumen 5W
x3

▪ ABS body 360 degree rotation LOCK

▪ PE lampshade: avoid nebulization
▪ Operates using 3 x AAA batteries (not included)
▪ Waterproof grade: IP 54 OPEN

LxWxH g
KT NO.
mm
79832 165 x 25 x 30 58 10 / 120 Swivel Clip

Magnet

473
 LED Pen Light Set
7983
Paper display stand size(mm):
115 x 175 x 175 (0.124CUFT) 12
PC.
Kg
KT NO. Contents

6 PC. 79831
79830DQ 0.58 1 / 12
6 PC. 79832

79831-S 12 PC. 79831 0.58 1 / 12

79832-S 12 PC. 79832 0.58 1 / 12

LED Pocket Torch

79813
▪ Aluminium body and tube with wrist strap
▪ Operates using 2 x AA batteries (not included)

L g
KT NO.
mm
79813 153.5 57 10 / 200

Round Magnetic Tool Holder

9TE11
▪ Stainless steel tray resists corrosion
▪ Can be used horizontally, vertically, and
upside down
▪ Convenient for collecting small parts and tools

Size g
180°
KT NO.
mm
9TE11 Ø 150 433.0 1 / 30

PU Working Gloves Anti-vibration Protective Gloves

9TH31-XL 9TH31-2L 9TH21XL
▪ Strap design for easy adjustments ▪ Protection from repetitive impact and vibration
▪ Comfortable and breathable fabric material of pneumatic tools
g 70 100 ▪ Magnet in back of glove for storing metal parts
and fasteners
g 110 100

474
360° Cast Steel Bench Vise & Display Rack
Please wear proper safety gear while working.

9TZ11 87160
▪ Cast steel body and slide ideal for heavy duty ▪ Overall Size - W 400 x D 600 x H 2070 mm
applications
▪ Ductile cast iron screw pitched acme thread
ensures long life and positives action
▪ Serrated jaws design provides good grip
▪ 360° swivel base allows operator to approach
any direction

mm
274

1800 mm
mm
282
mm
302
mm
322
mm
185
600 mm

H L Kg
KT NO.
mm mm mm
9TZ11-04 146 57 310 7.50 1/1
9TZ11-05 166 67 365 11.0 1/1
9TZ11-06 200 76 422 14.5 1/1
9TZ11-08 225 89 492 18.0 1/1
9TZ11-10 250 102 572 25.6 1/1

475
 Screw Extractor Set
11205SQ
▪ A quick and easy way to remove broken screw,
5
pipe, bolt and stud PC.
g
100 25 / 100
Capacity L
KT NO.
mm inch mm

2127-06M M3~M6 1/8~1/4 51.5

2127-08M M6~M8 1/4~5/16 58.0
2127-11M M8~M11 5/16~7/16 66.0
2127-14M M11~M14 7/16~9/16 73.5
2127-18M M14~M18 9/16~3/4 81.0

11208SQ
▪ Quick and easy to remove broken screw, pipe,
8
bolt and stud PC.
g
829 6 / 24
Capacity L
KT NO.
mm inch mm

2127A-06M M3~M6 1/8~1/4 51.5

2127A-08M M6~M8 1/4~5/16 58.0
2127A-11M M8~M11 5/16~7/16 66.0
2127A-14M M11~M14 7/16~9/16 73.5
2127A-18M M14~M18 9/16~3/4 81.0
2127A-24M M18~M24 3/4~1 91.0
2127A-33M M24~M33 1~1-3/8 106.0
2127A-50M M33~M50 1-3/8~2 112.0

Screw Extractor & Drill Set

11225SQ
▪ Easy to remove 5~14 mm broken screws
▪ 15 PC. HSS drill bit & center guide
Drill Size
25
PC.
▪ 10 PC. extractor pin & nut
Screw Size
Kg
0.79 1 / 20

• Use the guide to drill a • Put on extractor nut

pilot hole in the center turning out broken Wrench Size

of broken screw screw with wrench

Blow case size (mm) :

260 x 175 x 60 (0.096CUFT)

476
Nut Splitter Set
9TD062
▪ For removing stubborn nuts or over tightened bolts without
damaging the bolt thread 2
PC.
▪ Suitable for nuts to a tensile class 6
▪ Do not overtighten to prevent damage to the threads under
the nut
Kg 0.61 12 / 36
Capacity Hex
KT NO. Hex
inch mm (mm)
9TD602 1/2"~5/8" 12~16 14
9TD603 5/8"~7/8" 16~22 19

9TD064
Kg 1.89 1 / 12
4
Capacity Hex PC.
KT NO.
inch mm (mm)
9TD601 5/16"~1/2" 9~12 12
9TD602 1/2"~5/8" 12~16 14
9TD603 5/8"~7/8" 16~22 19
9TD604 7/8"~1-1/8" 22~27 21
Blow case size (mm) :
260 x 175 x 60 (0.096CUFT)

1/2" DR. Damaged Nuts Remover Socket & Set

9TD403 1/2"
▪ Made of top quality SNCM alloy steel, provides good
wear resistance and durability
l
▪ Ideal for the removal of rounded, damaged or
corroded nuts, bolts, oil drain plugs, marine nuts and
bolts, exhaust manifold nuts, pipe nozzle, and studs
▪ No pounding, chisels or torches are needed
Can’t be used with
KT NO.
D1 D2 ℓ L g pneumatic wrench
mm mm mm mm
9TD403-10M 16 22 8 50 70 10 / 180
9TD403-12M 18.0 22 11 50 77 10 / 180
9TD403-13M 20.0 22 11 50 84 10 / 180
9TD403-14M 21.0 22 11 50 85 10 / 180
9TD403-17M 24.5 25 15 50 117 10 / 180
9TD403-19M 27.0 27 15 50 135 8 / 80
9TD403-21M 29.4 27 16 50 138 8 / 80
9TD403-22M 30.5 27 17 50 140 8 / 80
9TD403-23M 31.8 27 17 50 136 8 / 80
9TD403-27M 36.0 27 18 50 146 6 / 120

9TD 1/2"
Kg
KT NO. Contents
4
PC.
21, 22, 23 9TD034MR
9TD034MR 0.58
27
8740705 5
12, 13, PC.
9TD035MR 0.52 4/36
9TD403 14, 17, 19 9TD035MR

9TD036MR
10, 12, 13
14, 17, 19
0.60 6
8740706 PC.
9TD036MR

477
 Roller Stud Extractor Socket & Set
9TD401 1/2" 9TD014MR 1/2"
▪ For tightening or loosening studs ▪ 4 stud drivers for sizes M6, M8, M10 and M12
D1 Kg 1.10 1 / 25
4
PC.

Ratchet
Socket
Screw

D2

D1 D2 L g
KT NO.
mm mm mm mm

9TD401-06M 6 24.5 21 60 150.0 10 / 180

9TD401-08M 8 24.5 21 60 150.0 10 / 180 Blow case size (mm) :
210 x 111 x 49 (0.04CUFT)
9TD401-10M 10 27.5 21 69.5 190.0 12 / 120
9TD401-12M 12 27.5 21 69.5 190.0 12 / 120

478
Aviation Tin Snips
74010~74060
▪ Special drop forged CRMO with induction herded
edges 62HRC Left Cut

▪ Blades with serrated edges fast cuts in sheet metal, 74010

aluminum, and much more
▪ Cut 1.2mm cold-rolled steel (18GA) low carbon steel
▪ Non-slip color code grips for superior control Right Cut

▪ 74040 Notching bulldog style with higher cutting ability 74020

▪ 74060 Extra-long compound action style compare to
tin snips
• Special laborsaving design Straight
Cut

• High tensile strength 74030

• High torsional strength spring
• Solid and comfortable handle with non-slip design
• Hang-up hole for convenient storage
• Safety auto latch (D.PAT.) Notching

74040

Long-Cut

74060

Overall Cutting Color Cutting capacities (mm)

KT NO. length length of Copper Cold-rolled steel Hard steel Stainless g
mm mm handle (soft) (soft) HRC 30 (Hard) steel304
74010 248 35 Red 1.50 1.20 0.80 0.70 375 6 / 48
74020 248 35 Green 1.50 1.20 0.80 0.70 375 6 / 48
74030 250 38 Yellow 1.50 1.20 0.80 0.70 380 6 / 48
74040 230 25 Yellow 2.00 1.60 1.20 1.20 370 6 / 36
74060 290 75 Orange 1.10 0.94 0.70 0.53 450 6 / 36

Figure Tin Snips

74250~74270
▪ Special drop forged CRMO with induction herded
edges 63HRC
▪ Blades with serrated edges fast cuts in sheet metal, 74250
aluminum, and much more
▪ Cut 1.5mm cold-rolled steel (16GA) low carbon steel
▪ Non-slip color code grips for superior control
• Special laborsaving design
• High tensile strength provided 74260
• High torsional strength spring designed
• Solid and comfortable handle with non-slip design
• Hang-up hole for convenient storage
• Safety auto latch (D.PAT.)

74270

Overall Cutting Color Cutting capacities (mm)

KT NO. length length of Copper Cold-rolled steel Hard steel Stainless g
mm mm handle (soft) (soft) HRC 30 (Hard) steel304
74250 260 35 Red 1.80 1.50 1.00 0.90 480 6 / 36
74260 260 35 Blue 1.80 1.50 1.00 0.90 480 6 / 36
74270 260 35 Yellow 1.80 1.50 1.00 0.90 480 6 / 36

479
 Straight Pattern Snips
74410~74416
▪ Drop forged of finest quality steel induction herded
edges 60HRC
▪ Cuts straight flat face guides tool along straight line
▪ Blades individually hand edged for maximum
cutting efficiency
▪ Rust resistant blades
▪ Cushion handle for comfort and better grip 74410 ~ 74416

Overall Cutting Cutting capacities (mm)

KT NO. length length Copper Cold-rolled Steel Hard steel Stainless g
mm mm (soft) (soft) HRC 30 (Hard) steel304
74410 254 51 0.94 0.78 0.60 0.45 480 6 / 36
74412 305 70 1.15 0.91 0.70 0.63 650 6 / 24
74414 356 76 1.41 1.20 1.00 0.70 780 6 / 24
74416 415 63 2.00 1.60 1.20 1.00 1700 3 / 12

Curved Tin Snips

74512 74514
▪ Drop forged of finest quality steel induction herded
edges 60HRC
▪ Double curved, hollow ground blades reduce friction
for easier cutting
▪ British Gilbow type
▪ Rust resistant blades
▪ Cushion handle for comfort and better grip 74512 / 74514

Overall Cutting Cutting capacities (mm)

KT NO. length length Copper Cold-rolled steel Hard steel Stainless g
mm mm (soft) (soft) HRC 30 (Hard) steel304
74512 305 60 1.15 0.91 0.70 0.63 670 6 / 24
74514 356 65 1.40 1.20 100 0.70 920 6 / 24

Duckbill Pattern Snips

74613
▪ Drop forged of finest quality steel induction herded
edges 60HRC
▪ Cuts moderately tight curves left, right or straight in
light stock
▪ Blades individually hand edged for maximum
cutting efficiency
▪ Rust resistant blades
▪ Cushion handle for comfort and better grip

Overall Cutting Cutting capacities (mm)

KT NO. length length Copper Cold-rolled steel Hard steel Stainless g
mm mm (soft) (soft) HRC 30 (Hard) steel304
74613 330 72 1.20 0.84 0.61 0.61 720 6 / 24

480
Saw
7911-12
▪ Sliding metal bow
▪ Lightweight, resistant to oxidization and oil
▪ Two blade positions 45° and 90° including flush cut
▪ Ergonomic handle with hand stop
Adjustable blade Overall length g
KT NO.
length (mm) mm
7911-12 305 400 628 6 / 36

7921-12
▪ Sliding metal bow
▪ Handle material : ABS+TPR
▪ Lightweight & anti-slippery
▪ Four blade positions 45°, 90°, 135°, 180° including
flush cut
▪ Spare blades can be stored

Adjustable blade Overall length g

KT NO.
length (mm) mm
7921-12 300 510 555 12 / 24

Way to replace the blade

1. 2. 3.
PRESS
1

45°, 90°, 135°, 180°

• To loosen the button. • To press the button then pull • Replace the new blade.
the tube to take out the blade.

File
7510G
▪ Flat file
Size L g
KT NO.
mm mm mm mm

75101-08G 8 Bastard 200 4.8 20.0 190 2 / 40 L

75101-10G 10 cut 250 5.7 23.6 292 2 / 40

75102-08G 8 Second 200 4.8 20.0 190 2 / 40
75102-10G 10 cut 250 5.7 23.6 288 2 / 40

7520G
▪ Half round file
Size L g
KT NO.
mm mm mm mm

75201-08G 8 Bastard 200 6.7 19.9 190 2 / 40 L

75201-10G 10 cut 250 7.0 23.5 292 2 / 40
75202-08G 8 Second 200 6.7 19.9 190 2 / 40
75202-10G 10 cut 250 7.0 23.5 288 2 / 40

481
 File
7530G
▪ Round file
Size L g
KT NO.
mm mm mm
L
75302-08G 8 Second 200 7.2 122 2 / 40
75302-10G 10 cut 250 9.2 185 2 / 40

7540G
▪ Triangle file
Size L g
KT NO.
mm mm mm
L
75402-08G 8 Second 200 13.0 183 2 / 40
75402-10G 10 cut 250 14.9 254 2 / 40

7550G
▪ Square file
Size L g
KT NO.
mm mm mm
L
75501-08G 8 Bastard 200 7.5 130 2 / 40
75501-10G 10 cut 250 9.5 210 2 / 40
75502-08G 8 Second 200 7.5 132 2 / 40
75502-10G 10 cut 250 9.5 218 2 / 40

File Set
• Pouch material : Nylon

1005GQ 1015GQ
▪ Available with T2 cut for precision work
L Kg
KT NO. Contents
inch

75102-08G 75402-08G
1005GQ
75502-08G 8" 0.9 1 / 20
(for 8") 75202-08G

75302-08G

75102-10G 75402-10G
L

1015GQ
75202-10G 75502-10G 10" 1.4 1/8
(for 10")

75302-10G
1005GQ / 1015GQ

Needle Files Set

• Pouch material : Nylon

1036ZQ
▪ Available with GCR15 cut for precision work
L Kg
KT NO. Contents
mm

75135-06 75435-06

1036ZQ 75535-06 160 91 1/-

75235-06

75335-06 75035-06

482
Tap Holder
39123010M / 39123012M
39124012M
▪ Used with reversible ratchet and T-handle
▪ Chuck mechanism hold compatible tap drills
▪ Used for metal working screw thread

D S(mm) g
KT NO. Drive mm min. max.
39123010M 3/8 34.5 2.0 6.0 221 4/80
39123012M 3/8 34.5 4.0 9.0 221 4/64
39124012M 1/2 38.5 6.0 12.0 259 4/64

Professional Threaded Coil-Insert Repair Set

11311MQ
▪ Thread tap for most common metric size : M5, M6, M8 and M10
▪ Used for repairing and restoring damaged threads
▪ Suitable for machine, engine and other automotive repair applications 119
PC.
KT NO. Contents Kg
2.78 1/5

Screw-Coil:
M5×0.8×1.5D(L:7.5mm) 25 PC.
M6×1.0×1.5D(L:9mm) 25 PC.
M8×1.25×1.5D(L:12mm) 25 PC.
M10×1.5×1.5D(L:15mm) 25 PC.

Tap:
M5×0.8 1 PC.
M6×1.0 1 PC.
M8×1.25 1 PC.
M10×1.5 1 PC.

Tang Puncher:
M5×0.8 1 PC.
M6×1.0 1 PC.
M8×1.25 1 PC.
11311MQ M10×1.5 1 PC.

Drill:
5.2mm 1 PC.
6.3mm 1 PC.
8.3mm 1 PC.
10.4mm 1 PC.

Main Tool:
M5×0.8 1 PC.
M6×1.0 1 PC.
M8×1.25 1 PC.
M10×1.5 1 PC.
Metal case size (mm) : 350 x 216 x 40
3571-08 3/8”drive sliding T-handle
3760-05G 3/8”drive mini reversible ratchet
39123012M 3/8” tap holder

483
 Tap & Die Set
12916MQ1
▪▪Material: SK5 alloy steel
▪▪1 PC.Tap wrench(M3-M12, 1/8"~1/2") 16
PC.
▪▪1 PC. Die stock 25mm(1")
▪▪Tap: M3~M12
▪▪Die: M3~M12

Kg 0.78 1 / 20
KT NO. Contents

25mm (1”)
M3x0.5, M4x0.7,
12939MQ-A M5x0.8, M6x1.0, 12939MQ-A01
12916MQ1
M8x1.25, M10x1.5, M3~M12
M12x1.75 12939MQ-A02 (1/8”~1/2”)
12939MQ-A

12939MQ1 12939SQ1
▪▪Material: SK5 alloy steel
▪▪1 PC. Tap wrench(M3-M12, 1/8"~1/2") 39
PC.
▪▪1 PC. "T" Type tap wrench( M3-M6, 1/8"~1/4")
▪▪1 PC. Die stock 25mm(1")
▪▪1 PC. Screw driver
▪▪12939MQ1-
1 PC. Screw pitch gauge (0.5-28)
Tap: M3~M12 / Die: M3~M12
▪▪12939SQ1-
1 PC. Screw pitch gauge(12-40)
Tap: 1/8"~1/2" / Die: 1/8"~1/2"

Kg 1.4 1 / 10
KT NO. Contents

12939MQ-A06 / M3x0.5, 12939MQ-A07 / M3x0.6,

12939MQ-A08 / M4x0.7, 12939MQ-A09 / M4x0.75,
12939MQ-A10 / M5x0.8, 12939MQ-A11 / M5x0.9,
12939MQ-A12 / M6x0.75, 12939MQ-A13 / M6x1.0, 25mm (1")
12939MQ-A14 / M7x0.75, 12939MQ-A15 / M7x1.0, 12939MQ-A01
12939MQ-A 12939MQ-A16 / M8x1.0, 12939MQ-A17 / M8x1.25,
12939MQ-A18 / M10x1.25, 12939MQ-A19 / M10x1.5,
12939MQ-A20 / M12x1.5, 12939MQ-A21 / M12x1.75,
12939MQ-A22 / 1/8NPT27
M3~M12
12939MQ1 12939MQ-A23 / M3x0.5, 12939MQ-A24 / M3x0.6, 12939MQ-A02 (1/8"~1/2")
12939MQ-A25 / M4x0.7, 12939MQ-A26 / M4x0.75,
12939MQ-A27 / M5x0.8, 12939MQ-A28 / M5x0.9,
12939MQ-A29 / M6x0.75, 12939MQ-A30 / M6x1.0,
12939MQ-A31 / M7x0.75, 12939MQ-A32 / M7x1.0,
12939MQ-A 12939MQ-A33 / M8x1.0, 12939MQ-A34 / M8x1.25, M3~M6
12939MQ-A35 / M10x1.25, 12939MQ-A36 / M10x1.5,
12939MQ-A37 / M12x1.5, 12939MQ-A38 / M12x1.75, 12939MQ-A04 (1/8"~1/4")
12939MQ-A39 / 1/8NPT27
0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 27, 28
12939MQ-A03

12939SQ-A 4NS36, 6NC32, 8NC32, 10NC24, 10NF32, 12NC24, 12939MQ-A05

1/4NC20, 1/4NF28, 5/16NC18, 5/16NF24, 3/8NC16,
3/8NF24, 7/16NC14, 7/16NF20, 1/2NC13, 1/2NF20,
12939SQ1 1/8NPT27
12939SQ-A

12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40
12939SQ-A03

484
485
 PNEUMATIC TOOLS
▪▪3/8" Impact Wrench

▪▪1/2" Impact Wrench

▪▪3/4" Impact Wrench

▪▪1" Impact Wrench

▪▪1-1/2" Impact Wrench

▪▪Impact Wrench Set

▪▪Air Ratchet Wrench

▪▪Impact Screwdriver

▪▪Air Blow Gun

▪▪Air Hose Reel

486
487
 Max. torque Type Anvil

KT NO. Drive Standard Lightweight Mini. Working place STD Long Page
Ft.lb Nm
33311-020 3/8"
200 271 ○ 489
33311-021
33411-020
33411-021
200 271 ○ 489

33451-045
450 610 ○ 489
33451-046
33411-040
33411-041
500 678 ○ 490

33412-040
33412-041
500 678 2" 490
1/2"
33421-040
33421-041
500 678 ○ 490

33411-050
650 881 ○ 490
33411-051
33412-050
33412-051
650 881 2" 490

33431-065
650 881 ○ 491
33431-066
33611-055
33611-056
700 949 ○ 493

33612-055
33612-056 700 949 2" 493

33621-075
33621-076 800 1085 ○ 493

33622-075 3/4"
33622-076 800 1085 6" 493

33681-100
33681-101
1100 1491 ○ 492

33631-110
33631-111 1100 1491 ○ 494

33632-110
33632-111 1100 1491 6" 494

33671-160 ○
33672-160 1600 2170 495
6"
33851-120
33851-121 1200 1626 ○ 496

33852-120
33852-121 1200 1626 6" 496

33811-150 ○
33812-150
1500 2033 497
6"
33871-160 ○
33872-160
1600 2170 495
1" 6"
33841-180 ○
33842-180 1800 2440 496
6"
33831-180 ○
33832-180 1800 2440 497
6"
33861-200 ○
33862-200 2000 2712 498
6"
33851-250 ○
33852-250 2500 3388 499
8"
33911-250 ○
33912-250 1-1/2"
2500 3388 499
8"
33921-300 ○
3000 4065 499
33922-300 8"

488
Impact Wrench
33311 33411

More Power
20% Less
Vibration

Mechanism-Jumbo Hammer
▪▪Nickel chrome molybdenum square driver
3/8" ▪▪Variable speed trigger
▪▪Muffled on handle exhaust
33311

More Power
20% Less
Vibration

Mechanism-Jumbo Hammer
▪▪Nickel chrome molybdenum square driver
1/2" ▪▪Variable speed trigger
▪▪Muffled on handle exhaust

33411
Type Avg. air
Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33311-020 3/8" 9.53 Std.anvil 7/16" M11 10000 200 271 5-1/2" 139 1/4" BSPT 3/8" 6.2 90 71 2.5 95.35 3.78 1.35 2.98 1 / 10

33311-021 3/8" 9.53 Std.anvil 7/16" M11 10000 200 271 5-1/2" 139 1/4" NPT 3/8" 6.2 90 71 2.5 95.35 3.78 1.35 2.98 1 / 10

33411-020 1/2" 12.70 Std.anvil 7/16" M11 10000 200 271 5-1/2" 139 1/4" BSPT 3/8" 6.2 90 71 2.5 95.48 5.11 1.35 2.98 1 / 10

33411-021 1/2"" 12.70 Std.anvil 7/16" M11 10000 200 271 5-1/2" 139 1/4" NPT 3/8" 6.2 90 71 2.5 95.48 5.11 1.35 2.98 1 / 10

33451

-30%
length
4-15/16"

Twin Hammer
▪▪Mini design, overall length 125mm with 1.6kg
▪▪Nickel chrome molybenum square driver

1/2"
-40%
weight
33451

Type Avg. air

Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33451-045 1/2" 12.70 Std.anvil 5/8" M16 9000 450 610 4-15/16" 125 1/4" BSPT 3/8" 6.2 90 164 5.8 99.90 2.26 1.60 3.53 1 / 10

33451-046 1/2" 12.70 Std.anvil 5/8" M16 9000 450 610 4-15/16" 125 1/4" NPT 3/8" 6.2 90 164 5.8 99.90 2.26 1.60 3.53 1 / 10

489
 Impact Wrench
33421

More Power
20% Less
Vibration

Twin Hammer
▪▪Nickel chrome molybdenum square driver
Front exhaust ▪▪Variable speed trigger
1/2" ▪▪Muffled on front exhaust

33421
Type Avg. air
Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33421-040 1/2" 12.70 Std.anvil 5/8" M16 8000 500 678 6-3/4" 171 1/4" BSPT 3/8" 6.2 90 113 4.0 101.02 8.70 2.56 5.64 1 / 8

33421-041 1/2" 12.70 Std.anvil 5/8" M16 8000 500 678 6-3/4" 171 1/4" NPT 3/8" 6.2 90 113 4.0 101.02 8.70 2.56 5.64 1 / 8

33411 / 33412 33411 / 33412

Twin Hammer New Twin Hammer
More Power
20% Less
Vibration

1/2" 1/2"

33411-040 33411-050

1/2" 1/2"

33412-040 33412-050
Type Avg. air
Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33411-040 1/2" 12.70 Std. anvil 5/8" M16 8000 500 678 7-23/64" 187 1/4" BSPT 3/8" 6.2 90 113 4.0 95.22 4.85 2.60 5.73 1 / 8

33411-041 1/2" 12.70 Std. anvil 5/8" M16 8000 500 678 7-23/64" 187 1/4" NPT 3/8" 6.2 90 113 4.0 95.22 4.85 2.60 5.73 1 / 8

33412-040 1/2" 12.70 Long anvil 5/8" M16 8000 500 678 9-23/64" 238 1/4" BSPT 3/8" 6.2 90 113 4.0 95.78 4.80 2.80 6.17 1 / 8

33412-041 1/2" 12.70 Long anvil 5/8" M16 8000 500 678 9-23/64" 238 1/4" NPT 3/8" 6.2 90 113 4.0 95.78 4.80 2.80 6.17 1 / 8

33411-050 1/2" 12.70 Std. anvil 3/4" M19 8000 650 881 7-41/64" 194 1/4" BSPT 3/8" 6.2 90 125 4.4 96.50 8.13 2.80 6.17 1 / 8

33411-051 1/2" 12.70 Std. anvil 3/4" M19 8000 650 881 7-41/64" 194 1/4" NPT 3/8" 6.2 90 125 4.4 96.50 8.13 2.80 6.17 1 / 8

33412-050 1/2" 12.70 Long anvil 3/4" M19 8000 650 881 9-23/64" 238 1/4" BSPT 3/8" 6.2 90 125 4.4 96.19 6.84 3.20 7.05 1 / 8

33412-051 1/2" 12.70 Long anvil 3/4" M19 8000 650 881 9-23/64" 238 1/4" NPT 3/8" 6.2 90 125 4.4 96.19 6.84 3.20 7.05 1 / 8

490
 High Performance
Impact Wrench

33431-065
▪▪Well balanced impact wrench with easy operation
▪▪Improved twin hammer design : 30% higher torque One-hand control
forward &
Torque reverse switch
800ft.lb
650ft.lb 1085N.m
881N.m

Time Convenient to
switch on both
sides

3-speed regulator
for precise
control

Ergonomic design
interchangeable
rubber grip

Air exhaust
away from the
operator

Type Avg. air

Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33431-065 1/2" 12.70 Std.anvil 5/8" M16 8000 650 881 6-7/8" 175 1/4" BSPT 3/8" 6.2 90 139 4.9 101.50 9.37 2.58 5.69 1 / 8

33431-066 1/2" 12.70 Std.anvil 5/8" M16 8000 650 881 6-7/8" 175 1/4" NPT 3/8" 6.2 90 139 4.9 101.50 9.37 2.58 5.69 1 / 8

491
 Super Duty Composite
Impact Wrench

33481 33681 Torque

1500 N.m / 1100 ft.lb

Time

Lightweight
33411-050 33621-075 lightweight Composite B
-20 -48
20% - 48%
One-handed
-20%% -48%% F/R control

MOST POWERFUL

One-handed F / R
control
Easy forward / reverse
switch
Forward
Reverse

4-speed power
setting, full speed in
reverse

New twin hammer TPR comfortable

Strengthened structure, handle material
prolong the lifetime reduces vibration

Type Std. bolt size Free Air inlet Air hose Air pressure Avg. air Sound Vib Net weight
Square drive speed Max. torque Overall length
Std/Long consumption
inch mm anvil inch mm ft.lb Nm inch mm inch ID bar PSI DBA M/S2 kgs Ibs
KT NO. R.P.M L/min CFM
L

33481-095 1/2" 17.70 Std.anvil 1" M24 8000 950 1288 7-3/4" 197 1/4" BSPT 3/8" 6.2 90 190 6.7 96.00 8.10 2.25 4.96 1 / 8

33481-096 1/2" 17.70 Std.anvil 1" M24 8000 950 1288 7-3/4" 197 1/4" NPT 3/8" 6.2 90 190 6.7 96.00 8.10 2.25 4.96 1 / 8

33681-100 3/4" 19.05 Std.anvil 1-3/16" M30 8000 1100 1491 8-3/8" 211 1/4" BSPT 3/8" 6.2 90 190 6.7 96.00 8.98 2.35 5.20 1 / 8

33681-101 3/4" 19.05 Std.anvil 1-3/16" M30 8000 1100 1491 8-3/8" 211 1/4" NPT 3/8" 6.2 90 190 6.7 96.00 8.98 2.35 5.20 1 / 8

492
Impact Wrench
33611 33621
33612 33622

More Power
20% Less
Vibration

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust

3/4"

33611
3/4"

33621

3/4"

33612
3/4"

33622

Type Avg. air

Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

33611-055 3/4" 19.05 Std. anvil 7/8" M20 6500 700 949 7-13/32" 188 1/4" BSPT 3/8" 6.2 90 125 4.4 96.56 8.64 3.00 6.61 1/8

33611-056 3/4" 19.05 Std. anvil 7/8" M20 6500 700 949 7-13/32" 188 1/4" NPT 3/8" 6.2 90 125 4.4 96.56 8.64 3.00 6.61 1/8

33612-055 3/4" 19.05 Long anvil 7/8" M20 6500 700 949 11-13/32" 290 1/4" BSPT 3/8" 6.2 90 125 4.4 96.86 6.17 3.40 7.50 1/8

33612-056 3/4" 19.05 Long anvil 7/8" M20 6500 700 949 11-13/32" 290 1/4" NPT 3/8" 6.2 90 125 4.4 96.86 6.17 3.40 7.50 1/8

33621-075 3/4" 19.05 Std. anvil 1" M24 6500 800 1085 8-63/64" 228 1/4" BSPT 3/8" 6.2 90 198 7.0 97.28 6.89 4.50 9.92 1/4

33621-076 3/4" 19.05 Std. anvil 1" M24 6500 800 1085 8-63/64" 228 1/4" NPT 3/8" 6.2 90 198 7.0 97.28 6.89 4.50 9.92 1/4

33622-075 3/4" 19.05 Long anvil 1" M24 6500 800 1085 12-63/64" 330 1/4" BSPT 3/8" 6.2 90 198 7.0 96.68 6.46 5.00 11.02 1 / 4

33622-076 3/4" 19.05 Long anvil 1" M24 6500 800 1085 12-63/64" 330 1/4" NPT 3/8" 6.2 90 198 7.0 96.68 6.46 5.00 11.02 1 / 4

493
 Impact Wrench
33631 33632

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
3/4" ▪▪Variable speed trigger
▪▪Muffled on handle exhaust

33631

3/4"

33632

Type Free Avg. Air

Square drive Std. Bolt Size Max. Torque Overall Length Air inlet Air Hose Air Pressure Sound Vib Net Weight
Std/Long Speed Consumption
inch mm inch mm ft.lb Nm inch ID bar PSI DBA M/S2 kgs Ibs
KT NO. anvil R.P.M inch mm L/min CFM
L

33631-110 3/4" 19.05 Std. anvil 1-3/16" M30 5500 1100 1491 8-43/64" 220 3/8" BSPT 1/2" 6.2 90 269 9.5 98.35 5.31 5.60 12.35 1/4

33631-111 3/4" 19.05 Std. anvil 1-3/16" M30 5500 1100 1491 8-43/64" 220 3/8" NPT 1/2" 6.2 90 269 9.5 98.35 5.31 5.60 12.35 1/4

33632-110 3/4" 19.05 Long anvil 1-3/16" M30 5500 1100 1491 14-55/64" 377 3/8" BSPT 1/2" 6.2 90 269 9.5 97.20 7.90 6.04 13.32 1/4

33632-111 3/4" 19.05 Long anvil 1-3/16" M30 5500 1100 1491 14-55/64" 377 3/8" NPT 1/2" 6.2 90 269 9.5 97.20 7.90 6.04 13.32 1/4

494
Impact Wrench
33671 33871
33672 33872

New Twin Hammer

▪ Lightweight durable composite housing
▪ Nickel chrome molybenum square driver
3/4" ▪ Comfortable rubber handle

-10% Length
33671-160
18-19/64"

-45%
weight 6.40kg

33672-160
Long anvil

3/4"
11.30kg

33672-160 33812-150 20-19/32"

1"
Twin Hammer
▪ Light weight durable composite housing
▪ Nickel chrome molybdenum square driver
33871-160 ▪ Comfortable rubber handle
-10% Length
18-39/64"

-45%
weight 6.70kg

33872-160
1" Long anvil

12.50kg
33872-160
33832-180 20-19/32"

Type Free Avg. Air

Square drive Std. Bolt Size Max. Torque Overall Length Air inlet Air Hose Air Pressure Sound Vib Net Weight
Std/Long Speed Consumption
inch mm inch mm ft.lb Nm inch ID bar PSI DBA M/S2 kgs Ibs
KT NO. anvil R.P.M inch mm L/min CFM
L

1/2"
33671-160 3/4" 19.05 Std. anvil 1-3/16" M30 5500 1600 2170 12-1/2" 318 BSPT / NPT 3/4" 6.2 90 241 8.5 105.00 15.40 5.70 12.57 1 / 2
1/2"
33672-160 3/4" 19.05 Long anvil 1-3/16" M30 5500 1600 2170 18-19/64" 465 BSPT / NPT 3/4" 6.2 90 241 8.5 106.00 13.80 6.40 14.11 1 / 2
1/2"
33871-160 1" 25.40 Std. anvil 1-3/16" M30 5500 1600 2170 12-45/64" 323 BSPT / NPT 3/4" 6.2 90 241 8.5 106.00 13.70 5.80 12.79 1 / 2
1/2"
33872-160 1" 25.40 Long anvil 1-3/16" M30 5500 1600 2170 18-39/64" 473 BSPT / NPT 3/4" 6.2 90 241 8.5 104.00 14.98 6.70 14.77 1 / 2

495
 Impact Wrench
33851 33841
33852 33842

More Power
20% Less
Vibration

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust
New Twin Hammer
▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust

1"

33851
1"

33841

1"

1"
33852
33842

Type Free Avg. air

Square drive Std. bolt size Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
speed
inch mm Std/Long inch mm ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil R.P.M L/min CFM
L

33851-120 1" 25.40 Std. anvil 1-17/64" M32 5500 1200 1626 8-53/64" 224 3/8" BSPT 1/2" 6.2 90 269 9.5 99.75 6.57 5.64 12.43 1 / 4

33851-121 1" 25.40 Std. anvil 1-17/64" M32 5500 1200 1626 8-53/64" 224 3/8" NPT 1/2" 6.2 90 269 9.5 99.75 6.57 5.64 12.43 1 / 4

33852-120 1" 25.40 Long anvil 1-17/64" M32 5500 1200 1626 14-1/64" 356 3/8" BSPT 1/2" 6.2 90 269 9.5 98.00 8.40 6.04 13.32 1 / 4

33852-121 1" 25.40 Long anvil 1-17/64" M32 5500 1200 1626 14-1/64" 356 3/8" NPT 1/2" 6.2 90 269 9.5 98.00 8.40 6.04 13.32 1 / 4
1/2"
33841-180 1" 25.40 Std. anvil 1-27/64" M36 4000 1800 2440 12-3/32" 307 BSPT / NPT 3/4" 6.2 90 255 9.0 101.56 4.37 10.62 23.41 1 / 2
1/2"
33842-180 1" 25.40 Long anvil 1-27/64" M36 4000 1800 2440 20-5/64" 510 BSPT / NPT 3/4" 6.2 90 255 9.0 99.85 5.87 12.52 27.60 1 / 2

496
Impact Wrench
33811 33831
33812 33832

More Power
1"
20% Less
Vibration

33811-150

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust
1"

33812-150

1"

More Power
33831-180 20% Less
Vibration

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust
1"

33832-180

Type Free Avg. Air

Square drive Std. Bolt Size Max. Torque Overall Length Air inlet Air Hose Air Pressure Sound Vib Net Weight
Std/Long Speed Consumption
inch mm inch mm ft.lb Nm inch ID bar PSI DBA M/S2 kgs Ibs
KT NO. anvil R.P.M inch mm L/min CFM
L

1/2"
33811-150 1" 25.40 Std. anvil 1-1/4" M36 4000 1500 2033 14-19/32" 371 BSPT / NPT 3/4" 6.2 90 255 9.0 101.17 10.77 10.30 22.71 1 / 1
1/2"
33812-150 1" 25.40 Long anvil 1-1/4" M36 4000 1500 2033 20-19/32" 523 BSPT / NPT 3/4" 6.2 90 255 9.0 100.40 6.13 11.30 24.91 1 / 1
1/2"
33831-180 1" 25.40 Std. anvil 1-1/2" M38 4000 1800 2440 14-19/32" 371 BSPT / NPT 3/4" 6.2 90 255 9.0 102.11 8.84 11.50 25.35 1 / 1
1/2"
33832-180 1" 25.40 Long anvil 1-1/2" M38 4000 1800 2440 20-19/32" 523 BSPT / NPT 3/4" 6.2 90 255 9.0 103.99 6.60 12.50 27.56 1 / 1

497
 Impact Wrench
33861 33862

1"
Twin Hammer
▪▪Light weight durable composite housing
33861-200 ▪▪Nickel chrome molybdenum square driver
▪▪Comfortable rubber handle

Maximum torque 2000ft.lb !

-10% Length
19-3/16"

-35%
weight 8.10kg
1" 33862-200
Long anvil
33862-200
12.50kg

33832-180 20-19/32"

Type Avg. air

Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

1/2"
33861-200 1" 25.40 Std. anvil 1-27/64" M36 5000 2000 2712 13-43/64" 347 BSPT / NPT 3/4" 6.2 90 255 9.0 106.00 17.20 7.40 16.31 1 / 2
1/2"
33862-200 1" 25.40 Long anvil 1-27/64" M36 5000 2000 2712 19-3/16" 487 BSPT / NPT 3/4" 6.2 90 255 9.0 104.00 14.50 8.10 17.86 1 / 2

498
Impact Wrench
33851 33852
33911 33912
33921 33922

1"

33851-250

New Twin Hammer

▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust
1"

33852-250

1-1/2"

33911-250
33921-300
New Twin Hammer
▪▪Nickel chrome molybdenum square driver
▪▪Variable speed trigger
▪▪Muffled on handle exhaust

1-1/2"

33912-250
33922-300

Type Free Avg. Air

Square drive Std. Bolt Size Max. Torque Overall Length Air inlet Air Hose Air Pressure Sound Vib Net Weight
Std/Long Speed Consumption
inch mm inch mm ft.lb Nm inch ID bar PSI DBA M/S2 kgs Ibs
KT NO. anvil R.P.M inch mm L/min CFM
L

1/2"
33851-250 1" 25.40 Std. anvil 1-25/32" M45 3000 2500 3388 17-11/64" 436 BSPT / NPT 3/4" 6.2 90 411 14.5 101.15 6.30 15.80 34.83 1 / 1
1/2"
33852-250 1" 25.40 Long anvil 1-25/32" M45 3000 2500 3388 24-7/8" 632 BSPT / NPT 3/4" 6.2 90 411 14.5 101.91 6.49 18.70 41.23 1 / 1
1/2"
33911-250 1-1/2" 38.10 Std. anvil 1-25/32" M45 3000 2500 3388 17-53/64" 453 BSPT / NPT 3/4" 6.2 90 411 14.5 104.13 6.32 15.80 34.83 1 / 1
1/2"
33912-250 1-1/2" 38.10 Long anvil 1-25/32" M45 3000 2500 3388 23-53/64" 605 BSPT / NPT 3/4" 6.2 90 411 14.5 103.90 6.53 18.70 41.23 1 / 1
1/2"
33921-300 1-1/2" 38.10 Std. anvil 2" M50 3000 3000 4065 17-3/4" 451 BSPT / NPT 3/4" 6.2 90 453 16.0 104.52 8.86 19.70 43.43 1 / 1
1/2"
33922-300 1-1/2" 38.10 Long anvil 2" M50 3000 3000 4065 25-15/32" 647 BSPT / NPT 3/4" 6.2 90 453 16.0 104.52 7.12 22.80 50.27 1 / 1

499
 Impact Socket & Wrench Set
44506MP 44506MP01 44506MP10
1/2"
7
PC.

KT NO. Contents
Kg
2.7 1/6

SY-221M
44506MP (1/4"BSPT)
33451-045
SY-211M
44506MP01 (1/4"BSPT)
Blow case size (mm) : 4525M
310 x 240 x 85 (1.50 Cuft)
17, 19, 21, SY-231M
▪▪5 PC. stubby impact sockets 17~24mm 44506MP10 33451-046 22, 24 (1/4"NPT)
▪▪1 PC. impact wrench
▪▪1 PC. air inlet adaptor

44116MP 44116MP04 44116MP10

1/2"
21
PC.

KT NO. Contents
Kg
6.1 1/4

4535M
44116MP SY-221M
9, 10, 11, 13, 14, (1/4"BSPT)
Blow case size (mm) :
315 x 250 x 120 (0.339 cuft) 17, 19, 22, 24, 27

▪▪10 PC. impact sockets 9~27mm 4415M 33411-040

▪▪3 PC. thin wall impact sockets 17~21mm 44116MP04 17, 19, 21 SY-211M
▪▪1 PC. impact wrench (1/4"BSPT)
▪▪1 PC. extension bar 4260-05 4797
▪▪1 PC. universal joint
▪▪2 PC. ring Ø 3.5 x 19mm & Ø 3.5 x 23mm 44116MP10 90601
SY-231M
▪▪2 PC. pin Ø 3 x 20 & Ø 3 x 25 (6150) 90602 90401 (1/4"NPT)
90402 33411-041
▪▪1 PC. air inlet adaptor

500
Impact Socket & Wrench Set
44118MP 44118MP04 44118MP10
1/2"
23
PC.

KT NO. Contents
Kg
8.4 1/2

4435M
44118MP SY-221M
10, 11, 12, 13, 14,
(1/4"BSPT)
16, 17, 19, 21, 22,
23, 24, 26, 27
Blow case size (mm) :
420 x 315 x 100 (0.475 cuft) 44118MP04 33411-040 SY-211M
▪▪14 PC. deep impact sockets 10~27mm 4260-03 4797 (1/4"BSPT)
4260-05
▪▪1 PC. impact wrench
▪▪2 PC. extension bars, 3" & 5" L
90601
▪▪1 PC. universal joint 44118MP10 90602 90401
90402 SY-231M
▪▪2 PC. ring Ø 3.5 x 19mm & Ø 3.5 x 23mm (1/4"NPT)
▪▪2 PC. pin Ø 3 x 20mm & Ø 3 x 25mm (6150) 33411-041
▪▪1 PC. air inlet adaptor

64111MP 64111MP01 64111MP12

3/4"
14
PC.

KT NO. Contents
Kg
10.8 1/2

6535M
64111MP SY-221M
26, 27, 28, 30, 32, (1/4"BSPT)
Blow case size (mm) : 35, 36, 38
420 x 315 x 100 (0.475 cuft)
33621-075
▪▪8 PC. impact sockets 26~38mm 64111MP01 SY-211M
▪▪1 PC. impact wrench 6260-07 6797 (1/4"BSPT)
▪▪1 PC. extension bar, 7" L
▪▪1 PC. universal joint 90603
▪▪1 PC. ring Ø 5.5 x 37mm 64111MP12 90404 SY-231M
▪▪1 PC. pin Ø 4 x 35 (1/4"NPT)
33621-076
▪▪1 PC. air inlet adaptor

501
 Impact Socket & Wrench Set
64115MP 64115MP01 64115MP12
3/4"
18
PC.

KT NO. Contents
Kg
10.8 1/2

6535M
64115MP SY-221M
24, 26, 27, 29, 30, (1/4"BSPT)
Blow case size (mm) : 32, 33, 34, 35, 36,
510 x 390 x 115 (0.822 cuft) 38, 41
33621-075
▪▪12 PC. impact sockets 64115MP01 SY-211M
▪▪1 PC. impact wrench (1/4"BSPT)
6260-07 6797
▪▪1 PC. extension bar, 7" L
▪▪1 PC. universal joint
90603
▪▪1 PC. ring Ø 5.5 x 37mm 64115MP12 90404 SY-231M
▪▪1 PC. pin Ø 4.0 x 35mm 33621-076 (1/4"NPT)
▪▪1 PC. air inlet adaptor

502
 Super Duty Air Ratchet Wrench
Dust-free design

Dual Pawl Ratchet

Unique head design: dust free and

prevents deformation and triples the Other brand
life of parts

1. Dust-free design 360° exhaust rotation

2. Prevents deformation and direct air away from
triples the life of the parts. working area.

1
2

37323 37423

3/8"

37323
1/2"

37423
▪▪Ergonomically enhanced composite handle
▪▪360° exhaust rotation leads the air away from working area
▪▪Unique head design: dust free and prevent deformation and triples the life of parts
▪▪Dual pawl design provides higher torque
Type Avg. air
Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

37323-080 3/8" 9.53 Std. anvil 3/8" M10 280 80 108 11" 279 1/4" BSPT 3/8" 6.2 90 113 4.0 94.00 2.52 1.25 2.76 1 / 12
37323-081 3/8" 9.53 Std. anvil 3/8" M10 280 80 108 11" 279 1/4" NPT 3/8" 6.2 90 113 4.0 94.00 2.52 1.25 2.76 1 / 12
37423-080 1/2" 12.70 Std. anvil 3/8" M10 280 80 108 11" 279 1/4" BSPT 3/8" 6.2 90 113 4.0 93.00 2.07 1.25 2.76 1 / 12
37423-081 1/2" 12.70 Std. anvil 3/8" M10 280 80 108 11" 279 1/4" NPT 3/8" 6.2 90 113 4.0 93.00 2.07 1.25 2.76 1 / 12

503
 Air Ratchet Wrench
37221 37321
37334 37434
▪▪Ergonomically enhanced composite handle
▪▪Dual pawl design provides higher torque

1/4" & 3/8"

1
2

37221 • Dust-free design

• Prevents deformation and
37321 triples the life of the parts

3/8" & 1/2"

37334 Regular
37434
Type Avg. air
Square drive Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Sound Vib Net weight
Std/Long
inch mm inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI consumption DBA M/S2 kgs Ibs
KT NO. anvil L/min CFM
L

37221-030 1/4" 6.35 Std. anvil 1/4" M6 250 30 41 8-1/16" 205 1/4" BSPT 3/8" 6.2 90 79 2.8 86.00 2.32 0.67 1.48 1 / 30
37221-031 1/4" 6.35 Std. anvil 1/4" M6 250 30 41 8-1/16" 205 1/4" NPT 3/8" 6.2 90 79 2.8 86.00 2.32 0.67 1.48 1 / 30
37321-050 3/8" 9.53 Std. anvil 5/16" M8 270 50 68 8-1/16" 205 1/4" BSPT 3/8" 6.2 90 79 2.8 93.00 2.26 0.67 1.48 1 / 30
37321-051 3/8" 9.53 Std. anvil 5/16" M8 270 50 68 8-1/16" 205 1/4" NPT 3/8" 6.2 90 79 2.8 93.00 2.26 0.67 1.48 1 / 30
37334-080 3/8" 9.53 Std. anvil 3/8" M10 210 80 108 10-39/64" 268 1/4" BSPT 3/8" 6.2 90 127 4.5 93.00 3.58 1.25 2.76 1 / 10
37334-081 3/8" 9.53 Std. anvil 3/8" M10 210 80 108 10-39/64" 268 1/4" NPT 3/8" 6.2 90 127 4.5 93.00 3.58 1.25 2.76 1 / 10
37434-080 1/2" 12.70 Std. anvil 3/8" M10 210 80 108 10-39/64" 268 1/4" BSPT 3/8" 6.2 90 127 4.5 92.00 3.91 1.26 2.78 1 / 10
37434-081 1/2" 12.70 Std. anvil 3/8" M10 210 80 108 10-39/64" 268 1/4" NPT 3/8" 6.2 90 127 4.5 92.00 3.91 1.26 2.78 1 / 10

37235
37335 37435

3/8"

▪▪Working around tightly packed

engines, machinery and equipment 37335

1/4" 1/2"

37235 37435
Avg. Air
Square drive Free Speed Max. Torque Overall Length Air inlet Air Hose Air Pressure Consumption Sound Vib Net Weight
KT NO. inch mm R.P.M ft.lb Nm inch mm inch ID bar PSI
L/min CFM DBA M/S2 kgs Ibs
L

37235-030 1/4" 6.35 230 30 41 6-1/8" 155 1/4" BSPT 3/8" 6.2 90 71 2.5 92.00 10.50 0.49 1.08 1 / 20
37235-031 1/4" 6.35 230 30 41 6-1/8" 155 1/4" NPT 3/8" 6.2 90 71 2.5 92.00 10.50 0.49 1.08 1 / 20
37335-075 3/8" 9.53 200 75 102 10-1/4" 260 1/4" BSPT 3/8" 6.2 90 113 4.0 92.00 10.50 1.20 2.64 1 / 20
37335-076 3/8" 9.53 200 75 102 10-1/4" 260 1/4" NPT 3/8" 6.2 90 113 4.0 92.00 10.50 1.20 2.64 1 / 20
37435-075 1/2" 12.70 200 75 102 10-1/4" 260 1/4" BSPT 3/8" 6.2 90 113 4.0 92.00 10.50 1.20 2.64 1 / 20
37435-076 1/2" 12.70 200 75 102 10-1/4" 260 1/4" NPT 3/8" 6.2 90 113 4.0 92.00 10.50 1.20 2.64 1 / 20

504
Impact Screwdriver
3311 3312
1/4"

3311 3312
Mechanism-hex.Twin Dog Mechanism-hex.Twin Pinless Clutch

Collect Size Std. bolt size Free speed Max. torque Overall length Air inlet Air hose Air pressure Avg. air Sound Vib Net weight
inch mm inch mm R.P.M ft.lb Nm inch ID bar PSI consumption DBA M/S2 kgs Ibs
inch mm L/min CFM
KT NO.
L

33111 1/4" 6.35 3/16" M5 10000 26 35 7-1/2" 191 1/4" BSPT 3/8" 6.2 90 71 2.5 89.53 10.29 0.73 1.61 1 / 20
33112 1/4" 6.35 3/16" M5 10000 26 35 7-1/2" 191 1/4" NPT 3/8" 6.2 90 71 2.5 89.53 10.29 0.73 1.61 1 / 20
33121 1/4" 6.35 3/16" M5 11000 75 102 7-1/4" 183 1/4" BSPT 3/8" 6.2 90 96 3.4 92.8 3.83 0.82 1.81 1 / 20

33122 1/4" 6.35 3/16" M5 11000 75 102 7-1/4" 183 1/4" NPT 3/8" 6.2 90 96 3.4 92.8 3.83 0.82 1.81 1 / 20

Continuous Flow Air Grease Gun

9BV14
▪▪Ideal for machine, automobile, farm and
garden equipments, vehicles etc.
▪▪360° rotating handle

360°

Air inlet (inch) Air Source Range Recommended Air Source Capacity
KT NO. Screw Thread input output input output
c.c. oz
Kg
(psi/bar) (psi/bar) (psi/bar) (psi/bar)

60~150 psi 2400~6000 psi 90 psi 3600 psi

9BV1410 1/4" BSPT 1/8" x 28 PT 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1420 1/4" BSPT 10 x 1.0 Mertric 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1411 1/4" NPT 1/8" x 28 PT 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1421 1/4" NPT 10 x 1.0 Mertric 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
9BV1410 / 9BV1411 For general market except North America, Germany, South Africa, Egypt
9BV1420 / 9BV1421 For Germany, South Africa, Egypt, etc.

505
 Continuous Flow Air Grease Gun with 12" Tube
9BV14T

▪▪Ideal for machine, automobile, farm and

garden equipments, vehicles etc.
9BU8109 ▪▪360° rotating handle
9BU8209
9BU8112
9BU8212

Air inlet (inch) Air Source Range Recommended Air Source Capacity
KT NO. Screw Thread input output input output
c.c. oz
Kg
(psi/bar) (psi/bar) (psi/bar) (psi/bar)

60~150 psi 2400~6000 psi 90 psi 3600 psi

9BV1410T 1/4" BSPT 1/8" x 28 PT 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1420T 1/4" BSPT 10 x 1.0 Mertric 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1411T 1/4" NPT 1/8" x 28 PT 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
60~150 psi 2400~6000 psi 90 psi 3600 psi
9BV1421T 1/4" NPT 10 x 1.0 Mertric 400 14 1.7 1 / 10
(4.2~10.3 bar) (165~412 bar) (6.2 bar) (250 bar)
9BU8109 9" length 1/8" x 28 PT
9BU8209 9" length 10 x 1.0 Mertric
9BU8112 12" length 1/8" x 28 PT
9BU8212 12" length 10 x 1.0 Mertric
9BV1410T / 9BV1411T For general market except North America, Germany, South Africa, Egypt
9BV1420T / 9BV1421T For Germany, South Africa, Egypt, etc.

Air Blow Gun

7990
ℓ

▪▪Ideal for cleaning

▪▪Steel nozzle & nylon fiber handle
▪▪Air pressure: 90 PSI recommended
▪▪Air consumption: 1/4” hose-13cfm-350I/min , 3/8”
hose-15cfm-430I/min
▪▪Sound pressure: 85~90 dB
▪▪Working pressure: 75~120 PSI/5.0~8.0 kgs
▪▪Max pressure: 200 PSI/ 15 kgs

KT NO.
Air inlet ℓ L g
inch inch mm (mm)

79900-04 BSPT 4 100 245 200 20 / 100

79900-10 BSPT 10 250 420 240 25 / 50
79900-13 BSPT 13 330 475 260 25 / 50
79900-20 BSPT 20 500 650 300 25 / 50
79901-04 NPT 4 100 245 200 20 / 100
Copper Thread 79901-10 NPT 10 250 420 240 25 / 50
79901-13 NPT 13 330 475 260 25 / 50
79901-20 NPT 20 500 650 300 25 / 50

506
3-In-1 Inflator
9BM
▪▪Diaphragm pressure gauge
▪▪Accuracy: ANSI B40.100 ±3% ~ ±2% ~ ±3%
▪▪Special rubber housing protects manometer
against light impacts 9BM2110
▪▪3 functions(check, release, inflator) all together on
the press handle
9BM2111
▪▪Flexible 400MM high pressure rubber hose with 9BM2210
clip-on air tire chuck 9BM2211
▪▪Pressure Range:
0-160 PSI (9BM21) / 0-220 PSI (9BM22)
▪▪Built in hang-up hook allows easy storage

9BM2110A
9BM2111A

L1
Inflator
Release L2
Check

146
20 185

9BM2-01 9BM2-02
Pressure range Air Inlet L (mm) Air hose g
KT NO. (Psi) (BSPT/NPT) L1 L2 (ID)
9BM2110 160 1/4" BSPT Ø13 x 400 180 3/8" 500 1 / 12
9BM2111 160 1/4" NPT Ø13 x 400 180 3/8" 500 1 / 12
9BM2210 220 1/4" BSPT Ø13 x 400 180 3/8" 520 1 / 12
9BM2211 220 1/4" NPT Ø13 x 400 180 3/8" 520 1 / 12
9BM2210A 220 1/4" BSPT Ø13 x 400 180 3/8" 600 1 / 12
9BM2211A 220 1/4" NPT Ø13 x 400 180 3/8" 600 1 / 12
9BM2-01 (included in all 9BM series) 20 - 25 -
9BM2-02 (included in 9BM2210A & 11A only) 185 - 105 -

507
 PU Air Spiral Hose
79953 79960 79962
▪▪Super mechanical strength and excellent
abrasive resistance
▪▪Superior heat and cold resistance
▪▪Oil resistance
▪▪Light weight
▪▪Temperature resistance from -20˚ C ~ +60˚ C

79953 79960 79962

Hose I.D. Hose O.D. Hose Length Working Pressure Maximum Pressure Male PT Fitting Weight
KT NO. Type
(mm) (mm) (M) (PSI) (bar) (PSI) (bar) (inch) (kgs) (lbs)

79953-10 8 12 10 108 7.4 320 22.2 - 1/4" BSPT 0.80 1.76 1 / 20

79953-15 8 12 15 108 7.4 320 22.2 - 1/4" BSPT 1.30 2.87 1 / 16
79960-10 8 12 10 160 11.0 640 44.1 Asian - 0.93 2.05 1 / 20
79960-15 8 12 15 160 11.0 640 44.1 Asian - 1.31 2.87 1 / 16
79960-20 8 12 20 160 11.0 640 44.1 Asian - 1.66 3.64 1 / 16
79962-10 8 12 10 160 11.0 640 44.1 EU - 0.92 2.02 1 / 20
79962-15 8 12 15 160 11.0 640 44.1 EU - 1.31 2.87 1 / 16
79962-20 8 12 20 160 11.0 640 44.1 EU - 1.72 3.78 1 / 16

Air Hose Reel

7991
▪▪Automatic rewind with SK 5-spring steel spring
▪▪16 teeth gear-stop ensures safety
▪▪300 PSI working pressure allowed
▪▪Sturdy structure with 0.7mm thick steel rail stored in iron case
▪▪Replaceable air house design & hanging rack

• Pull the air hose • Install new • Dismantle

to the end till air hose connection
it shows joint
• 16 teeth gear design can
replacement
spread stress evenly and Do not pull the air
hose when seeing
stop returning tag

1 Bar = 1.01972 kgf/cm2

1 Bar = 14.5036 PSI
Hose I.D. Hose O.D. Hose length Air lnlet / outlet Working kg
KT NO. Type
mm mm (M) inch pressure psi

79910-10 8 12 10 Asian 1/4" BSPT 300 5.2 1/2

79910-15 8 12 15 Asian 1/4" BSPT 300 6.5 1/2
79911-10 8 12 10 US 1/4" NPT 300 5.2 1/2
79911-15 8 12 15 US 1/4" NPT 300 6.5 1/2
79912-10 8 12 10 EU 1/4" BSPT 300 5.2 1/2
79912-15 8 12 15 EU 1/4" BSPT 300 6.5 1/2

508
Air Lubricator
799A
Regulator ▪▪Semi auto drain valve
▪▪Steel guards offer better protection
Lubricator
▪▪Easy installation and disassembly
160 mm

231.3 mm
Filter

157 mm
Drain valv

Filter Max Input Max Output Operation Drain Oil

KT NO.
Port Size
(inch)
Element
(μ)
Pressure
(PSI)
Pressure
(PSI)
Max Flow
(L/min) ˚
Temperature Range ( C)
Capacity
(ml)
Capactity
(ml)
Air Inlet
(inch)
Weight
(Kgs) (Ibs)

799A0-23C 1/4" 5 215 7~150 1750 5 ~ 60 80 150 1/4" BSPT 1.53 3.37 1 / 12
799A1-23C 1/4" 5 215 7~150 1750 5 ~ 60 80 150 1/4" NPT 1.53 3.37 1 / 12
799A0-33C 3/8" 5 215 7~150 2500 5 ~ 60 80 150 1/4" BSPT 1.53 3.37 1 / 12
799A1-33C 3/8" 5 215 7~150 2500 5 ~ 60 80 150 1/4" NPT 1.53 3.37 1 / 12

Impact Wrench Tester

ZV101
▪▪Applicable Range: 180 ft-lb~1180 ft-lb(250 Nm~1600 Nm)
▪▪Max. Torque: 1450 ft-lb(1950 Nm)
▪▪Applicable Size: SQ.DR-1/2"~3/4"
▪▪Measuring Direction: Forward
▪▪Screw Size: M32
▪▪Length x Width: 35cm x 30cm
▪▪Easy to read LED panel displays reference torque value in
lbf-ft, kgf-m, kgf-cm and N-m (selectable)

Kg
53.7 1

509
 Air Quick Coupler
KT NO. Size Type g

SY-211M 21.4 12 / 504

SY-211F 1/4"BSPT European 22.8 10 / 420

SY-210M 88.4 20 / 240

SY-221M 24.4 12 / 504

SY-221F 1/4"BSPT Asian 28.6 10 / 420

SY-260M 81.6 20 / 240

SY-210H 78.0 15 / 180

European
SY-211H 18.0 10 / 320
1/4" hose
SY-220H 87.0 10 / 320
Asian
SY-221H 31.0 10 / 320

SY-231M 23.6 12 / 504

SY-231F 1/4"NPT American 21.2 10 / 420

SY-230M 85.5 20 / 240

SY-310H 75.0 15 / 180

European
SY-311H 22.0 10 / 320
3/8" hose
SY-320H 78.0 15 / 180
Asian
SY-321H 23.0 10 / 320

SY-410H 82.0 15 / 180

SY-411H 1/2" hose European 26.0 10 / 320

3 PC. Repair Tools

14103GP
Contents
kg
0.58 1 / 20
33012 33013

33011

510
Impact Wrench Hook
9145
KT NO. Size Type g

91451-01A 1/4" x 19 BSPT European 268.8 1 / 48

91451-01B 1/4" x 18 NPT American 271.2 1 / 48

91451-01F 1/4" x 19 BSPT Asian 272.8 1 / 48

Impact Wrench Display Stand

87106
▪▪Applied for 1/2" DR. & 3/4" DR. impact wrench
▪▪Steel plate with chrome plated, air hose
adapter attached
kg
1.23 1/6

Magnetic Holder for Impact Wrench

9TE31
▪▪Moveable magnetic tool holder with muti-purpose
▪▪Designed for motor repair tools, keeps your work area
clean and organized
▪▪4 PC. super magnets 1,500 gauss with non-sliding rubber
can hold up to 7 kgs
▪▪Suitable for air impact wrench, long sockets, impact
L
sockets and torque wrench
▪▪The angle of torque wrench holder can be adjusted

L Capacity kg
KT NO.
(inch) (mm) (kg) (lbs)

9TE31 14-3/16 360 7 15.4 1.3 1 / 10

Anti-vibration Protective Gloves PU Working Gloves

9TH21XL 9TH31-XL 9TH31-2L
▪▪Protection from repetitive impact and vibration ▪▪Strap design for easy adjustments
of pneumatic tools ▪▪Comfortable and breathable fabric material
▪▪Magnet in back of glove for storing metal parts g 70 100
and fasteners
g 110 100

511
 AUTOMOTIVE TOOLS
▪ Engine Series

▪ Under Car Series

▪ Body Series

▪ Battery & Electrical

▪ General Tools

512
513
 286
PC. Tool Trolley Contents
Contents No. 934-010MRVD Kg 28.8 CUFT 2.97

▪ Special tool set for Automobile, suitable for VOLKSWAGEN-GROUP, MERCEDES-BENZ,

OPEL, BMW & Japanese passanger car

9-3544MRV #9 P.64 9-4537MRV #9 P.64 9-4147PRV 9-4401MPV 9-2565MRV #7 P.63 9-90119MRV #9 P.65 9-1220MRV #9 P.65
#10 P.67 #10 P.67 9-4129PRV #7 P.63

9-31124MRV #6 P.61 9-40104GPV 9-40113GPV 9-90135MRV 9-90118PRV

#10 P.67 #10 P.67 #10 P.67 #10 P.68
Engine Series

286
PC. Tool Trolley Set

7
Kg 92.8 934-010MRV 934-010MRV-G 934-010MRV-B
CUFT 15.21 (87434-7B P.31) (87434-7B-G P.31) (87434-7B-B P.31)

7
Kg 98.8 9634-010MRV 9634-010MRV-G 9634-010MRV-B
CUFT 15.21 (87634-7B P.35) (87634-7B-G P.35) (87634-7B-B P.35)

9934-010MRV 9934-010MRV-G
Kg
7
98.5
9934-010MRV-B
CUFT 15.4 (87934-7B P.37) (87934-7B-G P.37) (87934-7B-B P.37)

7
Kg 103.8 9934F-010MRV 9934F-010MRV-G 9934F-010MRV-B
CUFT 15.67 (87934-7BF P.37) (87934-7BF-G P.37) (87934-7BF-B P.37)

514
ALFA ROMEO
Diesel Engine Setting & Locking Set
9AT2006E
▪ The set includes flywheel holding tool, crankshaft 6
locking tool and camshaft setting tools D BELT
PC.
▪ Suitable for Lancia, Alfa Romeo and Fiat engine
▪ Use to set and lock engines timing

g
1359.5 1 / 10

145 (98-01), 146 (98-01), 147 (01-09)

156 (97-08), 159 (05-09), 166 (98-08)
MODEL:
GT (04-09), Brera (05-09), Spider (06-09)
Crosswagon (04-08)

CONTENTS :
1.9JTD 8v. • A&C&D - crankshaft locking tool
323.02, 371.01, 182B9.000, 937A2.000 • B - flywheel holding tool (crank pulley removal)
937A3.000, 939A1.000, 939A2.000, • E - camshaft setting tool (pair)
939A7.000 Camshaft housing

1.9JTD 16v.
192A5.000, 192B1.000, 937A4.000
ENGINE 937A5.000, 939A2.000, 939A8.000
CODE:
2.4JTD 10v.
325.01, 342.02, 362.02, 839A6.000
841C.000
2.4JTD 20v.
841G.000, 841H.000, 841M.000
939A3.000, 939A9.000

BMW
Petrol Engine Timing Set

Engine Series
9AT1003E
▪ The set includes camshaft setting plates and a
flywheel locking pin
3 CHAIN
PC. P
▪ Suitable for BMW V12 M70 & M73 petrol engine
▪ Use to lock the camshaft on the correct timing
position

g
2189.5 1/5

750i / E32 / E38 (87-02)

MODEL:
850i / E31 (90-99)

CONTENTS :
M70 / M73
ENGINE • A - camshaft setting plate
50 12 A, 54 12 1 • B - flywheel locking pin
CODE:
54 12 2, 56 12 1

515
 BMW
Petrol Engine Twin Camshaft Setting & Locking Set
9AT1008E
▪ The set includes timing and VANOS setting /
locking tools
8 CHAIN
PC. P
▪ Suitable for BMW petrol 1.8 and 2.0 N42 / N46
(chain) engine
▪ Use to check / adjust engine timing and remove,
install or align VANOS unit

g
3600.5 1/3

118i. E87 (04-08)

120i. E87 (04-08)
316i. E46 (01-05)
CONTENTS :
316ti. Compact E46 (01-05) • A - VANOS alignment plate
318i. E46 (01-07) • B - camshaft setting plate (exhaust)
MODEL: 318ti. Compact E46 (01-05) • C - timing chain tensioner pre-load tool
318i. E90 (05-08) • D - crankshaft alignment pin
X3. 2.0i E83 (05-08) • E - camshaft setting plate (inlet)
Z4. 2.0i E85 (04-08) • F - camshaft turning tool
520i. E60 (04-08) • G - flywheel TDC locking pin
320i. E90 (05-08) • H - camshaft setting plate securing screw

ENGINE N42 / N46

CODE: B18, B18A, B20, B20A, B20B

BMW
Petrol Engine Twin Camshaft Setting & Locking Set
Engine Series

9AT1018E
▪ The set includes camshaft / carrier bracket
18 CHAIN
remover & installer tools PC. P
▪ Suitable for BMW petrol 1.8 and 2.0 N42 / N46
(chain) engine
g
4400.0 1/3

118i. E87 (04-08)

120i. E87 (04-08)
316i. E46 (01-05)
316ti. Compact E46 (01-05)
318i. E46 (01-07)
MODEL: 318ti. Compact E46 (01-05)
318i. E90 (05-08) CONTENTS :
X3. 2.0i E83 (05-08) • A&H&I - camshaft/carrier bracket
Z4. 2.0i E85 (04-08) • Mounting fixture
520i. E60 (04-08) • B - inlet camshaft securing tool (rear)
320i. E90 (05-08) • C&F - torsion spring remover/installer
• D&E - inlet camshaft securing tool (front)
• G - intermediate lever clamp set (8 PC.)
ENGINE N42 / N46
CODE: B18, B18A, B20, B20A, B20B

516
BMW
Petrol Engine Twin VANOS Service Set
9AT1009E
▪ The set includes compressed air connector, 9
twin VANOS setting tool and sprocket / chain P CHAIN
PC.
assembly fixture, timing adjustment plate, pre-
load tools
▪ Suitable for setting / locking popular BMW petrol
engine
▪ Use to adjust engine timing and set / lock engine
application
g
5965.7 1/3

318is. E36 (92-99) CONTENTS :

318ti Compact E36 (94-01) • A - camshaft setting plate
320i. E36 / E46 (92-07) • B - timing adjustment plate
323i. E36 / E46 (95-01) • C - compressed air connector
325i. E36 / (92-07) • D - sprocket / chain assembly fixture
328i. E36 / E46 (95-01) • E - flywheel locking pin
330i. E46 (00-07) • F - tensioner pin (M50)
520i. E39 / E60 (96-05) • G - twin VANOS setting tool
523i. E39 (96-00) • H - tensioner pin (M52)
MODEL: • I - tensioner tool
525i. E39 / E60 (00-05)
528i. E39 (96-00)
530i. E39 / E60 (00-05)
728i. E38 (94-02)
730i. E65 (02-05)
Z3. (E36) 1.9-3.0 (96-03)
Z4. (E85) 2.2-3.0 (03-06)
X3. (E83) 3.0 (03-06)
X5. (E53) 3.0 (99-07)

M42 / M44 / M50 / M52

Engine Series
no VANOS (VVT)
18 4S 1, 19 4S 1, 20 6S 2(Early),
25 6S 2(Early)
M50 / M52
Single VANOS (VVT) variants
20 6S 2(Later)
ENGINE 20 6S 3
CODE:
25 6S 2(Later)
M52(TU) / M54 / M56
Twin VANOS (VVT) variants
20 6S 4
22 6S 1
25 6S 4

517
 BMW
Petrol Engine Twin Camshaft Setting & Locking Set
9AT1102E
▪ The set includes camshaft locking plate and 2 CHAIN
PC. P
flywheel locking pin
▪ Suitable for M40 engines (also used on the M43
chain driven engine)
▪ Use to lock the camshaft and crankshaft TDC
position to keep their timing relationship while
replacing timing belt or carry out other timing
belt service
g
1900.5 1 / 10

316i E36 / E46 (93-04)

316i Compact E36 / E46 (98-01) CONTENTS :
MODEL: 318i E36 / E46 (93-01) • A - camshaft locking plate
518i E34 (94-96) • B - flywheel locking pin
Z3 1.8 / 1.9 E36 (96-03)

M43
ENGINE 16 4E 2, 16 4E 3
CODE:
18 4E 2, 19 4E1

BMW
Petrol Engine 1.8 To 3.0 Twin Cams Setting & Locking Set
9AT1106E
▪ The set includes camshaft setting plate, timing
6 CHAIN
adjustment plate, pre-load tool, flywheel PC. P
locking pin and tensioner pin
Engine Series

▪ Suitable for setting / locking popular BMW

petrol engine
▪ Suggestion:
Use with 9AT1-A02 wrench while using this kit on
SINGLE VANOS system (on inlet camshaft)
Use with 9AT1303 while using this set on TWIN
VANOS system
g
3780.0 1/5 CONTENTS :
• A - camshaft setting plate
• B - timing adjustment plate
318is. E36 (92-99) 525i. E39 / E60 (00-05)
• C - flywheel locking pin
318ti Compact. E36 (94-01) 528i. E39 (96-00)
• D - tensioner pin (M50)
320i. E36 / E46 (92-07) 530i. E39 / E60 (00-05)
• E - tensioner pin (M52)
323i. E36 / E46 (95-01) 728i. E38 (94-02)
• F - tensioner tool
MODEL: 325i. E36 / E46 (92-07) 730i. E65 (02-05)
328i. E36 / E46 (95-01) Z3. (E36) 1.9-3.0 (96-03)
330i. E46 (00-07) Z4. (E85) 2.2-3.0 (03-06)
520i. E39 / E60 (96-05) X3. (E83) 3.0 (03-06)
523i. E39 (96-00) X5. (E53) 3.0 (99-07)

M42 / M44 / M50 / M52 no VANOS (VVT)

18 4S 1, 19 4S 1, 20 6S 2(Early), 25 6S 2(Early).
M50 / M52 Single VANOS (VVT) variants
ENGINE 20 6S 2(Later), 20 6S 3, 25 6S 2(Later),
CODE:
25 6S 3, 28 6S 1
M52(TU) / M54 / M56 Twin VANOS (VVT) variants
20 6S 4, 22 6S 1, 25 6S 4, 25 6S 5, 28 6S 2, 30 6S 3

518
BMW
Petrol Engine Twin VANOS Service Set
9AT1303E
▪ The set includes compressed air connector, 3 CHAIN
PC. P
twin VANOS setting tool and sprocket / chain
assembly fixture
▪ Suitable for BMW M52TU, M54 & M56 engines
▪ Use to adjust engine timing on twin VANOS
system (Variable Valve Control) of BMW six
cylinder twin camshaft petrol engine
▪ Suggestion:
Use with 9AT1106 while using this kit to set / lock
application
g
2740.0 1/5
CONTENTS :
3 Series: E46 / Z3 • A - compressed air connector
5 Series: E39 / E60 / E61 • B - sprocket / chain assembly fixture
7 Series: E38 / E65 / E66 • C - twin VANOS setting tool
MODEL:
X3: E83
X5: E53
Z4: E85

ENGINE 20 6S 4, 22 6S 1, 25 6S 4, 25 6S 5
CODE: 28 6S 2, 30 6S 3

BMW
Petrol Engine Timing Alignment Set
9AT1112E
▪ The set includes camshaft locking tool, VANOS 12

Engine Series
P CHAIN
alignment plate, flywheel locking pin PC.
▪ Suitable for BMW 2.5/3.0 liters chain drive six
cylinder, twin cams 16v petrol engines
▪ Use to lock camshaft in TDC position when
setting or adjusting engines timing
g
5900.0 1/3

128i. E82 (07-08)

130i. E81/87 (05-08)
135iS. E82 (07-08)
323i. E90/91/92/93 (04-08)
325i/xi. E90/91/92/93 (04-08)
328i/xi. E90/91/92/93 (04-08)
330i/xi. E90/91/92/93 (04-08)
335i/xi. E90/91/92/93 (05-08)
CONTENTS :
• A - VANOS alignment plate
523i/Li. E60/61 (04-08)
MODEL: (Red for N53/N54, Silver for N51/N52/N52K )
525i/Li/xi. E60/61 (04-08)
• B - camshaft locking tool
528i/xi. E60/61 (06-08)
• C - flywheel locking pin
530i/Li/xi. E60/61 (05-08)
535i/xi. E60/61 (06-08)
630i. E63/64 (04-08)
730i/Li. E65/66 (04-08)
X3 2.5/3.0 E83 (06-08)
X5 3.0 E70 (06-08)
Z4 2.5/3.0 E85/86 (05-08)

ENGINE N51 / N52 /N52K (Valvetronic)

CODE: N53 / N54 (Direct Injection)

519
 BMW
Diesel Engine 2.0 / 3.0 Timing Set
9AT2007E
▪ The set includes camshaft setting plate, tensioner 7 CHAIN
PC. D
retaining pin set and flywheel locking pin
▪ Suitable for BMW 2.0 and 3.0 liters common rail
diesel engines in BMW 3, 5 & 7 Series, X5, Land
Rover Freelander, Range Rover, Rover 75, Vauxhall
/ Opel
▪ Use to check and adjust the timing position of
camshaft and TDC position of crankshaft
g
1752.5 1 / 10

118d E87 (03-07), 120d E87 (03-07)

318d / td E46 / E90 / 91(00-08)
320d / td E46 / E90 / 91(97-08)
325d E90 / 91 / 92 / 93 (06-09)
330d / xd / cd E46 / E90 / 91 / 92 / 93 (98-08) CONTENTS :
335d E90 / 91 / 92 (06-09) • A – camshaft setting plate
MODEL: 520d E39 / E60 / 61 (99-09) • B – camshaft plate locking tool
525d / xd E39 / E60 / 61 (99-09) • C – TDC timing pin
530d / xd E39 / E60 / 61 (98-09) • D – tensioner retaining pin set (pair)
535d E60 / 61 (04-09), 635d E63 / 64 (04-09) • E – flywheel locking pin
730d / Ld E38 / E65 / 66 (98-08)
X3 2.0d E83 (03-07), X3 3.0d / sd E83 (03-09)
X5 3.0d E53 / E70 (00-09)

M47 / M57/ M47TU / M57TU / M47T2 / M57T2

ENGINE 20 4D 1, 20 4D 4, 25 6D 1, 25 6D 2
CODE: 30 6D 1, 30 6D 2, 30 6D 3, 30 6D 4
30 6D 5

BMW
Engine Series

Petrol Engine Timing Setting & Locking Set

9AT1206E
▪ The set includes VANOS alignment plate,
6 CHAIN
camshaft setting tools, flywheel locking pin and PC. P
timing chain tensioner pre-load tool
▪ Suitable for 1.6 BMW, 4 cylinder twin camshaft
16v and chain driven petrol engines with VANOS
▪ Use to check and adjust engine timing

g
2657.0 1/5

116i. E81 E87 (03-09)

316i. E46 / E90 (01-08)
MODEL: CONTENTS :
316Ci. E46 (01-06)
316ti. E46 (01-05) • A - VANOS alignment plate
• B - camshaft setting plate (inlet)
• C - timing chain tensioner pre-load tool
ENGINE N40 / N45 / N45T • D - camshaft setting plate (exhaust)
CODE: B16, B16A, B16AC • E - camshaft setting plate securing screw
• F - flywheel locking pin
E D
B

520
BMW
Diesel Engine 2.5TDS Timing Set
9AT2106E
▪ The set includes camshaft setting plate, tensioner 6 CHAIN
lever, tensioner retaining pin, flywheel locking pin PC. D
and pump remove & sprocket retainer
▪ Suitable for BMW, Land Rover and Opel engine
▪ Use to retain and support the sprocket and timing
chains in correct position when the pump is
removed
g
2480.0 1/5

1.7 2.5td / tds (Chain)

318tds. E36(94-00) CONTENTS :
MODEL: 325td / tds. E36(91-99) • A - camshaft setting plate
525td / tds. E34(90-00) • B - tensioner lever
725tds. E38(95-02) • C - flywheel locking pin
• D - tensioner retaining pin
• E - pump remove & sprocket retainer (2 part)
ENGINE 1.7 2.5td / tds (Chain)
CODE: M41 / M51

BMW/ MINI
Petrol Engine Setting & Locking Set – BMW/PSA

Engine Series
9AT1010E
▪ The set includes camshaft setting tool, crankshaft 10
locking pin & chain tensioner tool P CHAIN
PC.
▪ Suitable for BMW Mini and PSA Peugeot Citroën
1.4/1.6 16v valvetronic direct injection engines
▪ Use to lock and adjust engine timing
g
BMW Mini Cooper N12/N14 2383.5 1/5

Mini cooper one

R56 (07-10)
MODEL:
Mini cooper / cooper S
R55/R56 (06-10)

CONTENTS :
N12 1.4/1.6(Valvetronic)
• A – camshaft setting tool (inlet)
ENGINE B14AB, B16A
• B – camshaft setting tool (exhaust)
CODE: N14 1.6(Direct Injection) • C – camshaft setting tool
B16A • D – camshaft setting clamp
• E – crankshaft locking pin
• F – chain tensioner tool
• G – M10 screw*4

521
 BMW/ MINI
Petrol Engine Timing Set
9AT1108E
▪ Use for BMW & Mini 1.6 litre chain drive petrol
8 CHAIN
engine PC. P
▪ Includes the cam & crankshaft locking tools and
chain pre-tension setting tools for TDC position
▪ Suitable for BMW (N13) & Mini (N18) engines
g
2526.5 1 / 10

BMW 1 Series
114i F20(2012-15), 116i F20 (2012-15),
118i F20 (2011-15)
BMW 3 Series
316i F30 (2012-15)
MINI
MODEL:
Cooper S (R56/57) (2010-15) CONTENTS :
Coupe Cooper S (R58) (2012-15) • A – camshaft locking tool
Roadster (R59) (2012-15) • B – camshaft locking tool
Countryman (R60) (2012-16) • C – chain tensioner tool
Paceman (R61) (2013-16) • D – crankshaft locking pin
Clubman (R55) (2011-14)
N13
B16A
ENGINE N18
CODE:
B16/M0, B16A, B16A/M0, B16A/MO, B16C,
B16C/TO, B16M0

BMW
Petrol Engine Timing Set
9AT1706E
Engine Series

▪ Use for BMW 2.0 litre chain drive petrol engine

▪ Includes the VANOS unit setting tools, camshaft
8 CHAIN
PC. P
locking tools and chain pre-tension setting tools
for TDC position
▪ Suitable for BMW N20 & N26 engines

g
4287.0 1/3
BMW 1 Series
125i F20/21(2012-14)
BMW 3 Series
320i/xDrive F30/31 (2012-14),
328i F30/31 (2012-14),
328i/xDrive F30/31 (2012-14)
BMW 5 Series
CONTENTS :
520i F10/11 (2010-14), 528i F10/11 (2013-14),
• A - VANOS alignments plate
MODEL: 528i/xDrive F10/11 (2011-14) • B - Camshaft locking tool
X1 • C - Chain tensioner tool
sDrive18i/20i E84 (2011-14), • D - Flywheel locking pin
xDrive20i/28i E84 (2011-14)
X3
xDrive20i/28i F25 (2011-14)
Z4
sDrive18i E89 (2013-14),
sDrive20i/28i E89 (2011-14)

ENGINE N20 B20A, N20 B20B/U0, N20 B20O0, N26 B20

CODE:

522
BMW
Diesel Engine Timing Locking Set
9AT2107E
▪ The set includes camshaft alignment tool, 7
flywheel locking tool, crankshaft pulley turning D CHAIN
PC.
tool, and also high pressure pump sprocket
removal tool
▪ Suitable for BMW N47 / N47S / N57 2.0 and 3.0
twin camshaft diesel chain drive engine
▪ Use to set & lock the camshaft and crankshaft
when adjusting valve timing on engine
correctly
g
1730.0 1 / 10

1 Series
116d/118d/120d/123d
E81/82/87/88 (07-12)
3 Series
316d/318d/320d/325d/330d/330xd CONTENTS :
E90/91/92/93 (07-12) • A – camshaft Alignment Tool
5 Series • B – flywheel Locking Tool
520d E60/61 (07-10) • C – crankshaft Turning Tool
525d/530d/535d F10/11 (10-12) • D – high Pressure Pump Sprocket Removal Tool
530d GT/535d GT F07 (09-12) • E – tensioner Locking Pin
MODEL:
7 Series
730d/730Ld/740d/740d xDrive
F01/02/04 (08-12)
X Series
X1 sDrive 18d/20d E84 (09-12)
X1 xDrive 18d/20d/23d E84 (09-12)
X3 20d E83 (07-10)
X3 xDrive 1.8d/30d E83 (08-12)
X5 30d/xDrive 40d E70 (10-12)
X6 xDrive 30d/40d E71/72 (10-12)

N47 / N47S

Engine Series
D20A
D20B
D20T0
D20O0
ENGINE D20UO
CODE:
N57
D30U0
D30O0
D30O1
D30T0

523
 BMW
Petrol Engine VANOS Engagement Wrench
9AT1-A02
▪ For BMW twin camshaft engines with single VANOS
unit mounted on inlet camshaft CHAIN
g
P
297.8 12 / 48

318is. E36 (92-99), 318ti Compact E36 (94-01)

320i. E36 / E46 (92-07), 323i. E36 / E46 (95-01)
325i. E36 / E46 (92-07), 328i. E36 / E46 (95-01)
330i. E46 (00-07), 520i. E39 / E60 (96-05)
523i. E39 (96-00), 525i. E39 / E60 (00-05)
MODEL:
528i. E39 (96-00), 530i. E39 / E60 (00-05)
728i. E38 (94-02), 730i. E65 (02-05)
Z3. (E36) 1.9-3.0 (96-03)
Z4. (E85) 2.2-3.0 (03-06)
X3. (E83) 3.0 (03-06), X5. (E53) 3.0 (99-07)

M50 / M52 Single VANOS (VVT) variants

ENGINE 20 6S 2(Later), 20 6S 3 , 25 6S 2(Later)
CODE:
25 6S 3, 28 6S 1

BMW
Diesel Engine Injection Pump Puller
9AT2-D01
▪ Specifically designed for holding the sprocket / chain in place when disassembling
the VP44 injection pump and high pressure pump D CHAIN
▪ Common rail fits BMW engines
g
528.0 6 / 36
318d / Compact(E46)
320d / td Compact(E46)
MODEL: 330d(E46), 535d(E60 / E61), 730d(E38)
Engine Series

X5 3.0d(E53), 530d(E39), 530d(E60 / E61)

525d(E60 / E61), 525d(E39)
M47 / M57
ENGINE 1 Series E87, 3 Series E46 / E90
CODE: 5 Series E39 / E60, 6 Series E63
7 Series E38 / E65, X3 E83 and E53 / E70

CHEVROLET
Petrol Engine Tension Adjustment Wrench Set (Via Water Pump)
9AT1202
▪ The set includes 41mm and 46mm tension adjust wrench
▪ Suitable for Vauxhall / Opel and Chevrolet engine 2 BELT
PC. P
g
694.4 6 / 24
9AT1202-B(41mm)
Kalos (04-08), Aveo (06-08),
MODEL: Espero / Aranos (95-97), Nexia (95-97)
Lanos (97-03), Nubira / Lacetti (97-09)
Cruze (2009)
1.4 A13DM A14MS F14S3
1.4 16v. F14D3, CONTENTS :
ENGINE 1.5 G15MF
CODE: • A - tension adjustment wrench (46mm)
1.5 16v. A15DM A15SMS A15MF • B - tension adjustment wrench (41mm)
1.6 16v. A16DM A16DMS F16D3 LXT

524
MERCEDES-BENZ
Petrol Engine Timing Set
9AT1016E
▪▪Use for chain drive 1.6 / 2.0 direct injection petrol
engine
16 CHAIN
PC. P
▪▪Includes different diameter alignment blocks
and pulley bit socket to ensure the camshaft in
the correct position
▪▪Suitable for Mercedes- Benz M133 / M270 / M274

g
5696.0 1/5

A-class 176 (since 2012)

B-class 242 / 246 (since 2012)
CLA 117 (since 2012)
MODEL: C-class 204 (since 2011)
C-class COUPE (since 2011) CONTENTS :
E-class 212 (since 2011) • A – camshaft alignment tool (chain end)
GLA (2014-15) • B – camshaft alignment tool (gearbox end)
• C – camshaft pulley bit socket (T100)
133.980 • D – camshaft alignment blocks (small)
ENGINE 270.910, 270.920
CODE:
274.910, 274.920

MERCEDES-BENZ
Petrol Engine Timing Set
9AT1606E

Engine Series
▪▪Use for 1.8 litre M271 chain drive petrol engine 6
▪▪Includes chain tensioner adjust tools and cam P CHAIN
PC.
pulley bit socket to hold the chain in place
▪▪Suitable for Mercedes- Benz M271

g
3452.0 1/3

MODEL ENGINE CODE

C-class 176 (2002-15)
271.820, 271.860, 271.861
C-class Coupe (2011-15)
271.921, 271.940, 271.941
CLC (2008-12)
271.942, 271.943, 271.944
CLK (2002-09)
271.946, 271.948, 271.950
E-class (2002-13)
271.952, 271.954, 271.955
E-class Coupe / Cabriolet (2004-13) CONTENTS :
271.956, 271.957, 271.958
SLK (2004-15) • A – camshaft locking tool
• B – cam chain tensioner rail wedge tool
Sprinter (2007-15) 271.951 • C – cam chain tensioner drift
• D – cam chain retaining bridge
• E – camshaft pulley bit socket (T100)

525
 PSA PEUGEOT CITROËN
Petrol Engine Setting & Locking Set – BMW/PSA
9AT1010E
▪ The set includes camshaft setting tool, crankshaft
locking pin & chain tensioner tool
10 CHAIN
PC. P
▪ Suitable for BMW Mini and PSA Peugeot Citroën
1.4/1.6 16v valvetronic direct injection engines
▪ Use to lock and adjust engine timing
g
2383.5 1/5
Citroen
C4(08-11)
C4 Picasso(08-13)
MODEL: Peugeot
207(06-11)
207CC(07-14)
308(07-14) CONTENTS :
Citroen • A – camshaft setting tool (inlet)
8FR(EP3) • B – camshaft setting tool (exhaust)
5FS(EP6) • C – camshaft setting tool
Peugeot • D – camshaft setting clamp
ENGINE EP3(8FS) • E – crankshaft locking pin
CODE: • F – chain tensioner tool
EP6(5FW)
EP6DT(5FX) • G – M10 screw*4
8FS(EP3)
EP6DTS(5FY)

PSA PEUGEOT CITROËN

Petrol Engine Timing Set
Engine Series

9AT1021E
▪ The set includes special flywheel tools and cam/
crankshaft timing pin 21 BELT
PC. P
▪ Use to replace timing belt engines of:
1.0 / 1.1 / 1.4 / 1.6 / 1.6VTS / 1.8 16v / 2.0 / 2.0
16V / 2.2
▪ Include PSA "EW coded" twin-cam 16v engine
and HPi versions
▪ Suitable for PSA Peugeot / Citroen engines
g
2163.5 1 / 10

CONTENTS :
• A – timing belt retaining tool
• B – tensioner adjusting tool
• C – flywheel locking tool
• D – flywheel holding tool
• E – flywheel plate locking tool
• F – flywheel locking tool
• G – flywheel locking tool
• H – tensioner locking tool
• I – tensioner locking tool
• J – timing pin

526
PSA PEUGEOT CITROËN
Diesel Engine Timing Set
9AT2026E
▪ The set includes special flywheel tools and cam/
26 BELT
crankshaft timing pin PC. D
▪ Use to replace timing belt engines of:
1.4HDi / 1.5D / 1.6HDi / 1.9D / 2.0HDi / 2.0DHDi
16V / 2.2HDi / 2.5D Turbo
▪ Suitable for PSA Peugeot / Citroen engines
g
3180.0 1/3

CONTENTS :
• A – flywheel pulley puller
• B – flywheel locking tool
• C – tensioner tool
• D – M8 x 80mm screw
• E – flywheel locking pin
• F – flywheel locking tool
• G – flywheel locking tool
• H – flywheel timing tool
• I – tensioner tool
• J – timing pin
• K – timing belt retaining tool
• L – tensioner locking pin
• M – special locking tool

Engine Series
PSA PEUGEOT CITROËN
Diesel Engine Setting Tool (Belt Drive)
9AT2-A01
▪ The set includes flywheel locking pin, TDC timing
pin and tensioner retaining tool D BELT
▪ Use for holding engine timing position when
replacing timing belt
▪ Suitable for Fiat, Iveco, Renault, Citroen/
Peugeot, Vauxhall/Opel
g
112.2 12 / 120

2.8D/Tdi/Hdi
MODEL: Relay / Jumper (01-06) A B C
Boxer (00-06)
CONTENTS :
• A – TDC Timing Pin
8140.43 • B – Flywheel Locking Pin (2pc)
ENGINE 8140.43S • C – Tensioner Retaining Tool
8140.63

527
 PSA PEUGEOT CITROËN
Petrol & Diesel Engine Flywheel Holding & Locking Tool
9AT3-E02
▪ Used to remove the crankshaft pulley when
P D BELT
replacing the timing belt
▪ The pulley retaining bolt is fitted with high torque
and the flywheel must be securely locked during
installation / removal
▪ Jamming tools into the teeth of the flywheel
will cause serious damage to both teeth and
housing
▪ Suitable for petrol and diesel engine

g
64.2 25 / 100

Petrol 1.0 to 2.0 TU / XU (Belt) Flywheel

XU 1.6 to 2.0
MODEL: Diesel 1.50 to 2.50 TUD / XUD (Belt)
XU1.6 to 2.0
XD1.8D to 1.9D

FIAT
Petrol Engine Setting & Locking Set
9AT1002E
▪ The set includes camshaft setting tool and 2 P CHAIN
Engine Series

tensioner retaining pin PC.

▪ Suitable for Vauxhall / Opel & Fiat engine
▪ Use to lock the camshafts on the correct timing
position
g
1510.0 1 / 10

Petrol 2.2 16v. Twin Cams(Chain)

MODEL:
Croma (05-09)

ENGINE Petrol 2.2 16v. Twin Cams(Chain)

CODE: 194A1.000 CONTENTS :
• A - camshaft setting tool
• B - tensioner retaining pin

528
FIAT
Diesel Engine Setting & Locking Tool Set
9AT2006E
▪ The set includes flywheel holding tool, crankshaft
locking tool and camshaft setting tools
6 BELT
PC. D
▪ Suitable for Lancia, Alfa Romeo and Fiat engine
▪ Use to set and lock engines timing
g
1359.5 1 / 10

Diesel
1.6JTD / 1.9JTD / 2.0JTD / 2.4JTD Multijet(Belt)
Punto (99-06), Grande Punto (05-09)
Idea (04-08), Brava/Bravo (98-02)
MODEL: Linea (07-09), New Bravo (07-09)
Marea/Weekend (99-03), Stilo (01-06)
Croma (05-09), Multipla (99-07)
Doblo/Cargo (02-09), Palio Weekend (02-06)
Sedici (06-09), Strada Pick-Up (03-06)

CONTENTS :
• A&C&D - crankshaft locking tool
1.6JTD 16v. • B - flywheel holding tool (crank pulley removal)
198A2.000, 198A3.000, 198A6.000 • E - camshaft setting tool (pair)
350A2.000
1.9JTD 8v.
182B4.000, 182B9.000, 186A6.000
186A8.000, 186A9.000, 188A2.000
188A7.000, 188B2.000, 192A1.000
192A3.000, 192A8.000
1.9JTD 8v.
192A9.000, 192B4.000, 192B5.000
ENGINE 199A5.000, 939A1.000, 939A5.000
CODE:
939A7.000, 223A7.000

Engine Series
1.9JTD 16v.
192A5.000, 937A5.000, 939A2.000 Camshaft housing
939A8.000
2.0JTD 16v.
198A5.000
2.4JTD 10v.
185A6.000
2.4JTD 20v.
939A3.000

529
 FIAT
Petrol Engine Flywheel Holding Tool
9AT1-E01
▪ Use to lock the flywheel while removing and
P BELT
replacing the timing belt
▪ Put it into the teeth of the flywheel to hold the
crankshaft up, while releasing or tightening the bolt
g
51.0 20 / 100

Stilo (01-08), Brava / Bravo (95-02)

MODEL: Marea / Weekend (96-03), Multipla (99-09)
Doblo / Cargo (02-06)
Fly wheel

ENGINE 178B3.000, 182A4.000

CODE: 182A6.000, 182B6.000

FIAT
Diesel Engine Setting Tool (Belt Drive)
9AT2-A01
▪ The set includes flywheel locking pin, TDC timing
pin and tensioner retaining tool D BELT
▪ Use for holding engine timing position when
replacing timing belt
▪ Suitable for Fiat, Iveco, Renault, Citroen/
Peugeot, Vauxhall/Opel
Engine Series

g
112.2 12 / 120

2.5D / 2.5DT / 2.8D / 2.8JTD

Croma (93-97)
MODEL: A B C
Ducato (87-06)
Talento (87-02) CONTENTS :
• A – TDC Timing Pin
• B – Flywheel Locking Pin (2pc)
8140.21, 8140.27, 8140.47R
• C – Tensioner Retaining Tool
ENGINE 8140.43, 8140.43S, 8140.63
8144.67

530
FIAT
Petrol Engine Flywheel Holding & Locking Tool
9AT3-E02
▪ Used to remove the crankshaft pulley when
replacing the timing belt BELT
P
▪ The pulley retaining bolt is fitted with high torque
and the flywheel must be securely locked during
installation / removal
▪ Jamming tools into the teeth of the flywheel
will cause serious damage to both teeth and
housing
▪ Suitable for petrol and diesel engine
g
64.2 25 / 100

Petrol 1.6 16v. Twin Cams (Belt) Flywheel

MODEL:
Stilo

FORD
Petrol Engine Twin Camshaft & Diesel Engine Timing Tool Set
9AT1406E
▪ The set includes VCT setting plate, camshaft
6 BELT
setting plate, crankshaft TDC location pin, PC. D P
tensioner locking pin and flywheel locking tools
▪ Suitable for 16v. Duratec petrol engine of FORD
1.6 Ti-VCT twin camshaft
▪ Use to adjust VCT timing on inlet and exhaust
camshaft during timing belt replacement
g
1640.0 1 / 10

Engine Series
Focus C-Max (03-08)
MODEL: Focus (04-08) CONTENTS :
Mondeo (07-08) • A&E - flywheel locking tool
• B - camshaft setting plate
ENGINE HXDA • C - crankshaft TDC location pin
CODE:
• D - tensioner locking pin
• F - VCT setting plate

FORD
Diesel Engine Timing and Injection Pump Setting & Locking Set
9AT2011E
▪ The set includes sprocket retaining plate, 11
D CHAIN
flywheel & tensioner locking pins PC.
▪ Suitable for chain drive diesel engine of Ford
▪ Use to install/remove injection pump & set/lock
engine timing
g
1472.5 1 / 10
Diesel 2.0 / 2.2 / 2.4
MODEL:
TDdi / TDci DURATORQ(CHAIN)
2.0Ddi ABFA, D3FA, F3FA
2.0 TDdi D5BA, D6BA
CONTENTS :
ENGINE 2.0 TDci FMBA, FMBB
• A – access Cover Removal Plate
CODE: 2.2 TDci QJBA~D
• B – sprocket Retaining Plate
2.4 Ddi D2FA, F4FA
• C – location Pins (3 PC.)
2.4 TDci FXFA, H9FA, JXFA, PHFA
• D – locking Pins (3 PC.)
• E – flywheel Locking Pins (2 PC.)
• F – tensioner Locking Pin

531
 FORD
Diesel Engine Setting/Locking Tool (Belt Drive)
9AT2-C01
▪ The set includes crankshaft (oval/round),
camshaft and tensioner locking pins D BELT
▪ Suitable for most of general VAG 1.4/1.9/2.0 TDi
PD DOHC engines
▪ Also for Ford Galaxy models engine
g
408.2 10 / 40
MODEL: Galaxy 1.9

ENGINE
ASZ / ANU
CODE:

CONTENTS : A B
• A - Crankshaft Locking Tool (Silver / Oval)
• B - Crankshaft Locking Tool (Black / Round)
• C - Camshaft Locking Pins (2 pcs) C
• D - Tensioner Pulley Locking Pin
• E - Auxiliary Belt Tensioner Locking Pin

D
E

FORD
Petrol Engine Timing Set – Ford 2.0 Ecoboost
9AT1105E
Engine Series

▪ The set includes cam & crankshaft alignment tool

and tensioner locking pin 5 CHAIN
P
PC.
▪ Suitable for Ford fitted with SCTi Ecoboost/Ti-VCT
2.0lt direct injection engines
▪ Camshaft tool use for vehicles manufactured May
2011 and after May 2011
g
1744.5 1 / 10

Galaxy(2010-), Mondeo(2010-)
MODEL:
S Max(2010-), Focus(2011-)

Galaxy 2.0
TNWA, TNWB, TPWA
Mondeo 2.0
ENGINE TNBA, TPBA
CONTENTS :
CODE: S Max 2.0
• A – camshaft alignment plate
TNWA, TNWB, TPWA
• B – camshaft alignment plate
Focus 2.0
• C – crankshaft locking tool
MGDA, XQDA
• D – crankshaft timing pin
• E – tensioner locking pin

532
FORD
Petrol Engine Timing Locking Set
9AT1005E
▪ The set includes revised design camshaft setting 5 CHAIN BELT
plate and tensioner locking pin PC. P
▪ Suitable for all later DURATEC petrol engine
▪ Use to ensure timing position is fixed and
maintained correctly during engine timing
application
g
1051.0 1 / 10

1.25 to 2.3 16v. DURATEC(Belt/Chain)

Fiesta (95-09)
Fusion (02-09)
Puma (97-02)
Focus (98-09)
Focus C-Max (03-07)
C-Max (07-09)
MODEL:
Mondeo (93-09) CONTENTS :
Cougar (98-01) • A - crank TDC location pin
S-Max (06-09) • B - crank TDC location pin
Galaxy (06-09) • C - camshaft setting plate
Tourneo Connect (02-06) • D - timing belt tensioner locking pin
Transit Connect (02-06) • E - crank holding tool
Transit (06-09) (+crank pulley bolt tightening)

1.25 16v (Belt)

DHA~G, F8JA~B, FUJA~B
M7JA~B, SNJA, STJA
1.4 16v (Belt)
ASDA~B, FHA, FHD~F, FXDA/C, FXDB/D
FXJA~B, SPJA

Engine Series
1.6 16v (Belt)
FYDA/C, FYDB/D, FYJA~B, L1F, L1J, L1L,
L1N, L1Q, L1T, L1V, L1W, HWDA~B
1.7 16v (Belt)
MHA~B
ENGINE 1.8 16v(Belt)
CODE: EYDB~G, EYDI~J, EYPA, EYPC, RKA~B
RKF, RKH, RKJ, RKK
1.8 16v(Chain)
CDBB, CGBA/B, CHBA/B, CSDA~B, QQDA~C
2.0 16v(Belt)
EDBA/C, EDBB, EDBD, EDDB~D, EDDF, NGA~D
2.0 RS/ST170(Belt)
ALDA, HMDA
2.0 16v(Chain)
AOBA, AODA~B, AOWA, CJBA/B, N4JB
2.3 16v(Chain)
SEBA, SEWA, GZFA, GZFB

533
 FORD
Petrol & Diesel Engine Flywheel Holding Set
9AT3-E01
▪ Lock crankshaft in timed position by locating
into flywheel P D BELT
▪ Suitable for counter-holding crankshaft when
releasing or tightening crankshaft pulley bolt
g
373.2 36 / 36

1.8 TDi / TDdi / TDCi Petrol Engines(Belt)

Fiesta / Courier, Tourneo Connect,
Focus C-Max, Mondeo, S-Max, Galaxy,
Transit Connect
MODEL:
2.0TDCi Diesel Engines (Belt)
Focus / C-Max, S-Max, Galaxy
1.6Ti-VCT Petrol Engines(Belt)
Focus, Mondeo, Focus C-Max
Startmotor

1.8 TDi / TDdi / TDCi Petrol Engines(Belt)

RTN, RTQ, RTP, BHDB, BHPA, C9DA, C9DB
C9DC, F9DA, F9DB, FFBA, FFDA, FFWA
HPCA, HPCB, P7PA, P9PA, QYBA, QYWA
ENGINE R2PA, R3PA, RWPA, KKDA
CODE:
2.0TDCi Diesel Engines (Belt)
AZWA, G6DA, G6DB, G6DC, QXWA
1.6Ti-VCT Petrol Engines(Belt)
HXDA

IVECO
Diesel Engine Setting Tool (Belt Drive)
Engine Series

9AT2-A01
▪ The set includes flywheel locking pin, TDC timing
pin and tensioner retaining tool D BELT
▪ Use for holding engine timing position when
replacing timing belt
▪ Suitable for Fiat, Iveco, Renault, Citroen/
Peugeot, Vauxhall/Opel
g
112.2 12 / 120

2.5D/2.8D
MODEL: Daily (91-06)
Turbo Daily (94-00)

A B C

CONTENTS :
• A – TDC Timing Pin
8140.07, 8140.27S, 8140.47 • B – Flywheel Locking Pin (2pc)
ENGINE 8140.47R, 8140.67F, 8140.97 • C – Tensioner Retaining Tool
CODE:
8140.23, 8140.43C, 8140.43S

534
LANCIA
Diesel Engine Setting & Locking Set
9AT2006E
▪ The set includes flywheel holding tool, crankshaft 6 BELT
PC. D
locking tool and camshaft setting tools
▪ Suitable for Lancia, Alfa Romeo and Fiat engine
▪ Use to set and lock engines timing
g
1359.5 1 / 10

2.0JTD / 2.2JTD(Belt)
Lybra (99-07)
MODEL: Musa (04-09)
Kappa (98-02)
Thesis (02-07)

1.9JTD 8v.
323.02, 371.01, 188B2.000, 937A2.000
CONTENTS :
• A&C&D - crankshaft locking tool
ENGINE 2.4JTD 10v.
• B - flywheel holding tool (crank pulley removal)
CODE: 838A8.000, 839A5.000, 839A6.000
• E - camshaft setting tool (pair)
2.4JTD 20v.
841C.000, 841D.000, 841G.000, 841H.000
Camshaft housing

LANCIA
Petrol Engine Flywheel Holding Tool

Engine Series
9AT1-E01
▪ Use to lock the flywheel while removing and
replacing the timing belt P BELT
▪ Put it into the teeth of the flywheel to hold the
crankshaft up, while releasing or tightening the
bolt
g
51.0 20 / 100

Delta (96-99) Flywheel

MODEL:
Lybra (99-06)

ENGINE 182A4.000
CODE: 182A6.000

535
 LAND ROVER
Diesel Engine 2.0 / 3.0 Timing Set
9AT2007E
▪ The set includes camshaft setting plate, 7 CHAIN
D
tensioner retaining pin set and flywheel locking PC.
pin
▪ Suitable for BMW 2.0 and 3.0 liters common
rail diesel engines in BMW 3, 5 & 7 Series, X5,
Land Rover Freelander, Range Rover, Rover 75,
Vauxhall / Opel
▪ Use to check and adjust the timing position of
camshaft and TDC position of crankshaft
g
1752.5 1 / 10

Diesel (Chain)
Freelander (00-06) CONTENTS :
MODEL: Td4 (2.0d) • A – camshaft setting plate
Range Rover (02-06) • B – camshaft plate locking tool
Td6 (3.0d) • C – TDC timing pin
• D – tensioner retaining pin set (pair)
• E – flywheel locking pin
Diesel (Chain)
204D3 / Td4
ENGINE (2.0 M47:BMW)
CODE:
306D1 / Td6
(3.0 M27:BMW)

LAND ROVER
Diesel Engine 2.5TDS Timing Set
Engine Series

9AT2106E
▪ The set includes camshaft setting plate, 6
D CHAIN
tensioner lever, tensioner retaining pin, flywheel PC.
locking pin and pump remove & sprocket
retainer
▪ Suitable for BMW, Land Rover and Opel engines
▪ Use to retain and support the sprocket and
timing chains in position when the pump is
removed
g
2480.0 1/5

CONTENTS :
• A – camshaft setting plate
2.5D Turbo (Chain) • B – tensioner lever
MODEL:
Range Rover (94-02) • C – flywheel locking pin
• D – tensioner retaining pin
• E – pump remove & sprocket retainer (2 part)

ENGINE 256T M51

CODE:

536
LAND ROVER
Diesel Injection Pump Puller
9AT2-D01
▪ Specifically designed for holding the sprocket
/ chain in place when disassembling the VP44 D CHAIN
injection pump and high pressure pump
▪ Common rail fits BMW engines
g
528.0 6 / 36

Freelander (00-06)
Td4 (2.0d)
MODEL:
Range Rover (02-06)
Td6 (3.0d)

204D3 / Td4
ENGINE (2.0 M47:BMW)
CODE: 306D1 / Td6
(3.0 M57 : BMW)

MAZDA
Petrol Engine Timing Locking Set
9AT1005E
▪ The set includes revised design camshaft setting
5 CHAIN BELT
plate and tensioner locking pin
PC.
P
▪ Suitable for all later DURATEC petrol engine

Engine Series
▪ Use to ensure timing position is fixed and
maintained correctly during engine timing
application
g
1051.0 1 / 10

1.25 to 2.3 16v. (Belt/Chain)

121 (95-00)
2 (02-07)
3 (03-09)
MODEL: 5 (05-09)
6 (02-09)
MX-5 (05-09) CONTENTS :
MPV (02-05) • A - crank TDC location pin
Tribute (01-01) • B - crank TDC location pin
• C - camshaft setting plate
1.25 to 2.3 16v. (Belt/Chain) • D - timing belt tensioner locking pin
1.25 16v : DHA, FUJA, FUJB • E - crank holding tool
(+crank pulley bolt tightening)
1.4 16v : FXJA, FXJB
ENGINE 1.6 16v : FYJA
CODE:
1.8 16v : L8
2.0 16v : LF, YF
2.3 16v : L3

537
 RENAULT
Diesel Engine Setting & Locking Set
9AT2008E
▪ The set includes auxiliary belt tensioner locking
pin, camshaft setting tools, crankshaft pulley
8 CHAIN
PC. D
holding tool, chain tensioner locking pin and
crankshaft locking pin
▪ Suitable for 2.0 dCi chain drive engines of
Renault, Nissan and Vauxhall / Opel

g
2375.5 1/5

Megane II (07-09)
Scenic /Grand Scenic (08-09)
Laguna II (01-05) CONTENTS :
MODEL: Vel Satis (05-09) • A&H - camshaft gear alignment tool
Espace / Grand Espace (08-09) • B&C - camshaft setting plate
Koleos (08-09) • D - crankshaft locking pin
Trafi c (07-09) • E - auxiliary belt tensioner locking pin
• F - crankshaft pulley holding tool
• G - chain tensioner locking pin
2,0 dCi M9R
ENGINE 700, 721, 722, 724, 740, 742, 746, 760
CODE:
761, 780, 802, 803, 805, 830, 832, 833

RENAULT
Petrol Engine Timing Locking Set-2.0 16V IDE - F5R
Engine Series

9AT1-A03
▪ The set includes crankshaft timing pin and
camshaft setting plate, to aid timing belt P BELT
replacement
▪ Suitable for Renault 2.0 IDE twin cam petrol
engines found in Laguna and Megane vehicles

g
510.6 10 / 30

Megane (99-03)
MODEL:
Laguna II (01-05)

ENGINE F5R700, 701, 740

CODE: TDC Position

538
RENAULT
Diesel Engine Setting Tool (Belt Drive)
9AT2-A01
▪ The set includes flywheel locking pin, TDC timing
pin and tensioner retaining tool D BELT
▪ Use for holding engine timing position when
replacing timing belt
▪ Suitable for Fiat, Iveco, Renault, Citroen/
Peugeot, Vauxhall/Opel
g
112.2 12 / 120

2.5D/2.5D Turbo/2.8dTi/2.8dCi
MODEL: Trafic (98-00)
Master (98-07)

S8U
720, 722, 730, 731, 742, 748
A B C
750, 752, 770, 772, 780, 782
ENGINE S9U
CODE:
700, 702, 704, 714, 740 CONTENTS :
S9W • A – TDC Timing Pin
206, 208, 212, 700, 702 • B – Flywheel Locking Pin (2pc)
• C – Tensioner Retaining Tool

RENAULT
Petrol & Diesel Engine Timing Set(dCi Engines)
9AT3-A03
▪ The set includes camshaft / crankshaft locking
pin and TDC timing pin P D BELT

Engine Series
▪ Used for timing belt replacement
▪ Suitable for Renault 1.5 and 1.9 dCi diesel and
petrol engine
g
RENAULT (Belt) 220 10 / 100

Diesel
Clio 1.5 dCi (01-08)
Clio 1.9 DTi (99-03)
Espace 1.9 TDi (97-02)
Kangoo 1.5 dCi (04-08)
Kangoo 1.9 DTi (99-03)
Laguna 1.9 DTi (97-03)
Megane II 1.5 dCi (02-05)
MODEL: Megane 1.9 D/TD/TDi (95-03)
Scenic II 1.5 dCi (02-05)
Scenic 1.9 TD (95-99)
Petrol
Clio 1.8 (92-01) B A C
Espace 2.0 (92-01)
Laguna 1.8 (92-01) CONTENTS :
Megane, 2.0 (96-99) • A - crankshaft Locking Pin
R19 1.8 (92-01) • B - TDC Timing Pin
F3R Scenic 2.0 (96-99) • C - camshaft/Crankshaft Locking Pin

Diesel
K9K
F8Q
ENGINE F9Q
CODE:
Petrol
F3P
F3R

539
 RENAULT
Petrol & Diesel Engine Flywheel Holding & Locking Tool
9AT3-E02
▪ Used to remove the crankshaft pulley when
replacing the timing belt P D BELT
▪ The pulley retaining bolt is fitted with high torque
and the flywheel must be securely locked during
installation / removal
▪ Jamming tools into the teeth of the flywheel
will cause serious damage to both teeth and
housing
▪ Suitable for petrol and diesel engine
g
64.2 25 / 100

Petrol 1.2 to 2.2 (Belt)

F3R, F7R, F7P, F3P, E7J Flywheel
MODEL: F8M and F8Q (early)
Diesel 1.50 to 2.50 TUD / XUD (Belt)
F3R, F7R, F7P, F3P, E7J, F8M and F8Q (early)

NISSAN
Diesel Engine Setting & Locking Tool Set
9AT2008E
▪ The set includes auxiliary belt tensioner locking
8
Engine Series

pin, camshaft setting tools, crankshaft pulley D CHAIN

holding tool, chain tensioner locking pin and PC.
crankshaft locking pin
▪ Suitable for 2.0 dCi chain drive engines of
Renault, Nissan and Vauxhall / Opel

g
2375.5 1/5

Primastar (08-09)
MODEL: Qashqai (08-09)
X-Trail (07-08) CONTENTS :
• A&H - camshaft gear alignment tool
• B&C - camshaft setting plate
ENGINE M9R • D - crankshaft locking pin
CODE: 780, 830, 832, 833 • E - auxiliary belt tensioner locking pin
• F - crankshaft pulley holding tool
• G - chain tensioner locking pin

540
ROVER
Diesel Engine 2.0 / 3.0 Timing Set
9AT2007E
▪ The set includes camshaft setting plate, tensioner
7 CHAIN
retaining pin set and flywheel locking pin D
PC.
▪ Suitable for BMW 2.0 and 3.0 liters common
rail diesel engines in BMW 3, 5 & 7 Series, X5,
Land Rover Freelander, Range Rover, Rover 75,
Vauxhall / Opel
▪ Use to check and adjust the timing position of
camshaft and TDC position of crankshaft

g
1752.5 1 / 10

Diesel (chain)
Rover CONTENTS :
MODEL: 75 (99-05) • A - camshaft setting plate
MG • B - camshaft plate locking tool
MG ZT (01-05) • C - TDC timing pin
• D - tensioner retaining pin set (pair)
• E - flywheel locking pin
ENGINE Diesel (chain)
CODE: M47R (BMW)

SAAB

Engine Series
Diesel Engine Setting & locking Set
9AT2005E
▪ The set includes crankshaft locking tool, camshaft
5 D BELT
setting tools(pair) and a tensioner locking pin
PC.
▪ Suitable for Saab, Vauxhall / Opel engine
▪ Use to set and lock engines timing

g
1295.0 1 / 10

Diesel 2.2D TiD

MODEL:
9-3 (98-04), 9-5 (02-06)

CONTENTS :
• A&D - crankshaft locking tools
• B - camshaft setting tool (pair)
ENGINE Diesel 2.2D TiD • C - tensioner locking pin
CODE: Z19DT / Z19DTH Camshaft housing

541
 SUZUKI
Petrol Engine Setting & Locking Set
9AT1004E
▪ The set includes camshaft setting plate, 4 CHAIN
PC. P
crankshaft locking pin, chain tensioner locking
pin and also camshaft sensor aligning bracket
▪ The bracket is used to position the timing sensor
disc on the inlet camshaft
g
1316.5 1 / 10

Petrol 1.0 / 1.2 (Chain)

MODEL:
Wagon R+ (05-08)

Petrol 1.0 / 1.2 (Chain)

ENGINE Z10XEP
CODE: CONTENTS :
Z12XEP
• A - camshaft sensor aligning bracket
• B - crankshaft locking pin
• C - camshaft locking tool
• D - tensioner retaining pin

SUZUKI
Diesel Engine Setting & Locking Set
Engine Series

9AT2004E
▪ The set includes flywheel locking pin, camshaft
setting tools, tensioner locking pin
4 D BELT
PC.
▪ Use to retain timing position only. DO NOT
use them to hold camshafts in position while
releasing or tightening the sprocket bolts

g
1100.5 1 / 10

Diesel 1.3 DDiS (Belt)

Swift (04-09)
MODEL:
Ignis (03-09)
Wagon R+ (03-08)
CONTENTS :
• A– camshaft setting tool set (pair)
ENGINE Diesel 1.3 DDiS (Belt) • B– flywheel locking pin
CODE: Z13DT • C– tensioner retaining pin

542
VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Front End Support Guide Set
9AT1006E
▪ The set includes 8mm, 10mm and 17mm support
6
guides PC.
▪ Suitable for almost all VW Group models
▪ Use to extend the front panel of vehicles,
so it can provide more space in engine
compartment while carrying out various service
applications

g 1420.5 1 / 10
CONTENTS :
• A - support guides 8mm (pair)
Audi • B - support guides 10mm (pair)
A4, A5, A6, A8 • C - support guides 17mm (pair)
Volkswagen
Lupo, Polo, Beetle, Golf/Bora, Passat
MODEL:
Touran, Sharan, Phaeton, Touareg
Seat
Ibiza / Cordoba, Arosa, Leon, Toledo
Alhambra, Altea

VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Petrol Engine Twin Camshaft Setting & Locking Set - VAG 1.4 / 1.6 FSi (Chain)

Engine Series
9AT1103E
▪ The set includes camshaft setting plate, TDC
position tool (with DTI) and tensioner locking pin 3 CHAIN
PC. P
▪ 9AT1103 ‘B’ TDC positioning tool has to use with
9AT3-F01(not included in this set)

g
1456.0 1 / 10

Audi
A3 (03-07)
Volkswagen
MODEL: Polo (02-08), Golf V (03-08), Golf Plus (05-08)
Jetta (06-08), Passat (05-08), Touran (03-07) CONTENTS :
Skoda • A - camshaft setting plate
Octavia II (04-08) • B - TDC position tool (with DTI)
• C - tensioner locking pin

1.4 FSI
ENGINE AXU, BKG, BLN
CODE: 1.6 FSI
BAG, BLF, BLP, BTS

543
 VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Diesel & Petrol Engine Timing Locking Set
• PETROL :1.6 / 1.8 / 1.8T / 2.0 / 2.0 16v / 2.0FSi (Chain)
• DIESEL :1.7 and 1.9D / DT / SDi / TDi (Belt)

9AT1012E
12 CHAIN BELT
g PC. P D
2037.2 1/5

PETROL / DIESEL : ▪ The set includes injection pump locking tools

Audi and cam belt tensioner tools
80 (91-96), A3 (96-08), S3 (99-03)
▪ Suitable for VAG diesel (1.7 and 1.9D / SDi / TDi)
A4 (95-08), A6 (94-08) , TT (98-05)
Cabriolet (94-08) and petrol (1.6 to 2.0) engines , and chain-in-
Seat head (1.8 / 1.8T) engine
Altea (04-08) Alhambra (95-04), ▪ Use to replace timing belt and carry out various
Arosa (98-05), Ibiza / Cordoba (93-02) timing tensioner applications
Inca (96-04), Leon (99-05), Toledo (94-08)
MODEL:
Skoda
Fabia (00-07), Octavia (96-07)
Superb (02-08)
VW
Beetle (99-08), Bora / Golf (94-08)
Caddy (95-06), Lupo (99-06)
Passat (96-08), Vento(92-97), Jetta(05-09)
Polo / Classic (95-02), Sharan (95-08)
Touran (03-08), Transporter (90-08)

PETROL :
1.6
1F, ABM, ADA, ADP, AEH, AEK, AFT,
AHL, AKL, AKS, ALZ, ANA, APF, ARM,
AVU, AYD, BFQ, BFS, BFQ, BGU, BSE, BSF CONTENTS :
Engine Series

• A&f - camshaft setting plate

1.8
• B - camshaft setting plate
ABS, ADR, ADZ, AGN, AJP, APG, APT, APX,
• C - injection pump locking pin
ARG
• D - injection pump locking pin
1.8T
• E - fan retaining bolt
AEB, AGU, AJH, AJL, AJQ, AMK, ANB, • G - tensioner retainer
APP, APU, APY, AQA, AQX, ARX, ARY, ARZ, • H - tensioner lock pin
AUM, AVC, AWC, AWT, AWU, AUQ, AYP, • I - tensioner retainer
BAM • J - tensioner adjuster
1.8 16v • K - tensioner adjuster
ADL
2.0
2E, AAC, AAE, ABF, ABK, ABT, ACE, ADY,
ENGINE AEG, AGG, AKT, APK, AQY, ATM, ATU, AWF,
CODE:
AWG, AXA, AZH, AZJ, AZL, AZM, BEH
2.0 16v
ABF
2.0FSi / TFSi
AXW, AXX, BGB, BHD, BLR, BLY,
BMB, BPJ, BPY, BWA

DIESEL :
1.7 SDi
AHB, AHG, AKU, AKW
1.9D/Turbo
1Y, AAZ, ABL, AEF
1.95 SDi
AEF, AEY, AGD, AGP, AQM, ASX, ASY, AYQ
1.9TDi
1Z, AAZ, AFF, AFN, AGR, AHF, AHH,
AHU, ALE, ALH, ASV, AVG

544
VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Petrol Engine Setting & Locking Set
9AT1104E
▪ The set includes a camshaft setting tool set (pair), 4 CHAIN
camshaft setting tool and a flywheel locking pin PC. P
▪ Suitable for VW Group 1.2 engine range
▪ Use to adjust valve timing
g
1291.0 1 / 10

Seat
Ibiza / Cordoba (02-08)
Skoda
MODEL:
Fabia (02-07)
Volkswagen
Polo (02-07), Fox ( 05-08), Eos (06-08) CONTENTS :
• A - camshaft setting tool set (pair)
• B - flywheel locking pin
• C - camshaft setting tool
Petrol 1.2 6v (chain)
ENGINE AWY, BMD
CODE: Petrol 1.2 6v (chain)
AZQ, BME

housing
i t t e ee

VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Petrol Engine Timing Set

Engine Series
9AT1306E
▪ The set includes camshaft setting plate, camshaft
sprocket adjusting tool, tensioner adjusting tool,
6 BELT
PC. P
tensioner locking pin and crankshaft locking pin
▪ Suitable for Audi VAG 3.0 V6 petrol engine
▪ Use to replace timing belt and carry out timing
tensioner applications

g
3667.5 1/5

Audi CONTENTS :
MODEL: A4 (01-08), A6 (01-08), A8 (03-08) • A - camshaft setting plate (pair)
Cabrio (03-08) • B - crankshaft locking pin
• C - camshaft sprocket adjusting tool
• D - tensioner adjusting tool
• E - tensioner locking pin
ENGINE ASN, AVK, BBJ
CODE:

545
 VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Petrol Engine Setting & Locking Set
9AT1506E
▪ The set includes dial & TDC indicator and
camshaft setting tool 6 CHAIN
PC. P
▪ Suitable for 1.2T/1.4T FSi and 1.4/1.6 FSi engines
▪ Use to check and adjust engine timing
g
1856.0 1 / 10

Audi
A1(10-12), A3(03-12)
Seat
Altea/Altea XL(08-12), Ibiza/Cordoba(08-12)
Leon(07-12), Toledo(07-09)
Skoda
Fabia II(07-12), Octavia II(04-12)
MODEL:
Roomster(06-12), Superb II(09-12)
Yeti(09-12)
VW
Caddy/ Caddy Maxi(10-12), Eos(06-12)
Golf(03-12), Golf Plus(03-12), Jetta(06-12)
Passat(05-11), Polo(02-12), Scirocco(08-12) CONTENTS :
Tiguan(07-12), Touran(03-12) • A – camshaft setting plate
• B – TDC indicator
• C – camshaft setting tool
• D – crankshaft locking pin
• E – dial test indicator
1.2T FSi • F – tensioner locking pin
CBZA, CBZB, CBZC
1.4T FSi
BLG, BMY, BWK, CAVA, CAVB, CAVC, CAVD
ENGINE CAVE, CAVF, CAXA, CAXC, CDGA, CSMA
CODE:
1.4 FSi
Engine Series

AXU, BKG, BLN

1.6 FSi
BAG, BLF, BLP, BTS

546
VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Diesel Engine Setting & Locking Set - Pumpe Düse
9AT2012E
▪ The set includes crankshaft & camshaft locking
tool, tensioner setting & adjusting tools 12 BELT
▪ Suitable for belt drive Pumpe Düse diesel engines D
PC.
of VW group vehicles and Ford (Galaxy)
▪ Use to set & lock engine to make sure timing
is in the correct position during timing belt
replacement
▪ Suggestion :
Check the engine is hydraulic or mechanical
tensioner first. (Some of 1.2 1.4 1.9 engines were
changed from hydraulic to mechanical.)

g
1845.0 1 / 10

Audi CONTENTS :
A2 (01-06), A3 (01-09), A4 (99-09) • A - crankshaft Locking Tool (Silver / Oval)
A5 (08-09), A6 (98-08), TT (08-09) • B - crankshaft Locking Tool (Black / Round)
Q5 (08-09) • C - camshaft Locking Pins (2 pcs)
Skoda • D - tensioner Adjuster (1.2, 1.4 & 1.9)
Fabia (00-07), Fabia II (07-09) • E - tensioner Adjuster (later 1.9 & 2.0)
Octavia (00-09), Octavia II (04-09) • F - tensioner Adjust Tool (Hexagon)
Superb (02-08), Roomster (07-09) • G - tensioner Locking Tool
• H - tensioner Locking Pin (Mechanical)
Volkswagen
• I - tensioner Locking Tool (Hydraulic)
Lupo(99-05), Polo(99-07), Fox(05-08)
MODEL: • J - tensioner Setting Tool (Hydraulic)
Jetta (05-09), Passat (98-09), Beetle (00-09)
• K - auxiliary Belt Tensioner Locking Pin
Touran (03-09), Sharan (99-09)
Caddy (03-09), Golf /Bora(98-08)
Golf Plus (05-09), Transporter (03-09)
Seat

Engine Series
Arosa (99-05), Altea XL(04-09)
Leon (00-09), Toledo (04-09)
Alhambra (99-09), Ibiza / Cordoba)(02-09)
Ford
Galaxy (99-06)

1.2TDi PD
ANZ, AYZ
1.4TDi PD
AMF, ATL, BAY, BHC, BMS, BNM, BNV, BWB
1.9TDi PD
AJM, AMG, ANU, ARL, ASZ, ATD, ATJ, AUY,
AVB, AVF, AVQ, AWX, AXB, AXC, AXR, BEW,
ENGINE BJB, BKC, BKE, BLS, BLT, BMT, BPX, BRB, BRM,
CODE: BRR,BRS, BRU, BSU, BSW, BTB, BUK, BVK, BXE,
BXF
2.0TDi PD
AZV, BDJ, BDK, BGW, BHW, BKD, BKP, BLB,
BMA, BMM, BMN, BMP, BMR, BNA, BPW, BRC,
BRE, BRF, BRT, BUZ, BVE, BVF, BVG, BVH, BWV
1.9TDi PD (Ford)
ANZ, ASZ, AUY

547
 VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Petrol Engine Camshaft Sprocket Holding Tool
9AT1-A01
▪ For locking the camshaft pulleys when changing
the toothed belt P BELT
▪ Engine repairs on 16-valve 1.4/1.6L FSi twin cams
injection engine
g
339.8 6 / 36

Audi
A2 (00-06)
Seat
Arosa (99-05), Ibiza / Cordoba (99-08)
Leon (99-05), Toledo (99-05), Inca (00-04)
MODEL: Skoda
Fabia (99-07), Octavia (00-08)
Volkswagen
Lupo (98-05), Polo (98-07),
Golf / Bora (97-08), Beetle (01-08)
Caddy (99-08)

AFK, AHW, AJV, AKQ, APE, AQQ, AUA, AUB,

ENGINE AXP, ARC, ATN, AUS, AVY, AZD , ARR, BBY,
CODE:
BBZ, BCA, BKY, BAD, BCB

VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Engine Series

Petrol Engine Chain Tensioner Retainer

9AT1-A04
▪ Use to hold the chain tensioner in position when
removing or installing timing chain P CHAIN
▪ Suitable for a variety of VAG chain drive engines

g
46.0 12 / 192

MODEL: A3, A4, A6, A8, S3, S4, TT, etc

Audi
AHA, AMB, AMU, APB, ART, ATC, ATQ, AWM,
ENGINE AWN, AWP, BBD, BCY, BEA, BEL, BFM
CODE: VW
AHA, APH, ATQ, AUG, AWM, AWP, AWV,
BKF, BNU

548
VOLKSWAGEN GROUP
AUDI/SKODA/VW/SEAT
Diesel Engine Setting/Locking Tool (Belt Drive)
9AT2-C01
▪ The set includes crankshaft (oval/round),
camshaft and tensioner locking pins D BELT
▪ Suitable for most of general VAG 1.4/1.9/2.0 TDi
PD DOHC engines
▪ Also for Ford Galaxy models engine

g
408.2 10 / 40 A B

Audi
A2 1.4 (02-06) C
A3 1.9/2.0 (02-08)
A4 1.2 (02-05)
A4 1.9/2.0 (02-05)
A6 1.9 (20-05) D
VW E
Beetle 1.9 (02-08)
Bora 1.9 (02-08)
Fox 1.4 (02-08) CONTENTS :
Golf 1.9 (02-08) • A - Crankshaft Locking Tool (Silver / Oval)
Lupo 1.4 (02-08) • B - Crankshaft Locking Tool (Black / Round)
MODEL:
Polo 1.4/1.9 (02-08) • C - Camshaft Locking Pins (2 pcs)
Sharan 1.9 (20-08) • D - Tensioner Pulley Locking Pin
Jetta 2.0 (03- ) • E - Auxiliary Belt Tensioner Locking Pin
Passat 2.0 (03- )
Touran 2.0 (03-)
Seat
Altea 1.9 (05-08)
Leon 1.9/2.0 (05-08)
Toledo 1.9 (05-08)
Skoda

Engine Series
Octavia II 2.0 (03-06)
Fabia 1.4 (03-06)

Audi
AMF, ASZ, ATD, AVB, AVF, AWX, AXR,
AZV, BHC, BKC, BKD, BKE, BLB, BMN, BNA,
BPW, BRB, BRC, BRD, BRE, BRF, BUY, BVA,
BVF, BVG
VW
ENGINE
AJM, AMF, ANU, ARL, ASZ, ATD, AUY,
CODE:
AVB, AVF, AWX, AXR, BAY, BMS, BNM,
BNZ, BWB
Seat
BJB, BKC, BLS, BMM, BXE
Skoda
AMF, AZV, BKD

549
 VAUXHALL/OPEL
Petrol Engine Setting & Locking Set
9AT1002E
▪ The set includes camshaft setting tool and
2 P CHAIN
tensioner retaining pin PC.
▪ Suitable for Vauxhall / Opel & Fiat engine
▪ Use to lock the camshafts on the correct timing
position

g
1510.0 1 / 10

Petrol 2.2 16v. Twin Cams(Chain)

Astra-G (00-06)
Astra-H (06-09)
MODEL: Speedster / VX220 (00-06)
Vectra-B+C (00-08) CONTENTS :
Signum (03-08) • A - camshaft setting tool
Zafira-A+B (00-09) • B - tensioner retaining pin

ENGINE Z22SE, Z22YH

CODE:

VAUXHALL/OPEL
Petrol Engine Setting & Locking Set
9AT1004E
Engine Series

▪ The set includes camshaft setting plate,

crankshaft locking pin, chain tensioner locking 4 P CHAIN
pin and also camshaft sensor aligning bracket PC.
▪ The bracket is used to position the timing sensor
disc on the inlet camshaft
g
1316.5 1 / 10

Petrol 1.0 / 1.2 / 1.4 Twin Cams (Chain)

Agila (00-08), Corsa-B (97-00),
Corsa-C (00-07), Corsa-D(06-09),
MODEL:
Combo-C (04-07), Tigra-B (04-09),
Astra-G (98-06), Astra-H (04-09),
Meriva (04-09)

CONTENTS :
Petrol 1.0 / 1.2 / 1.4 Twin Cams (Chain)
• A - camshaft sensor aligning bracket
1.0 12v.
• B - crankshaft locking pin
X10XE, Z10XE, Z10XEP • C - camshaft locking tool
ENGINE 1.2 16v.
CODE: • D - tensioner retaining pin
X12XE, Z12XE, Z12XEP
1.4 16v.
Z14XEL, Z14XEP

550
VAUXHALL/OPEL
Petrol & Diesel Engine Tensioner Adjustement Wrench (Via Water Pump)
9AT1202
▪ The set includes 41mm and 46mm tension adjust
2 CHAIN
wrench P D
PC.
▪ Suitable for Vauxhall / Opel and Chevrolet
engine
g
694.4 6 / 24

9AT1202 - A(46MM)
Petrol / 1.8 and 2.0 S.O.H.C
Astra F, Calibra, Frontera C18NZ, C20NE
Diesel / 1.6D and 1.7D
Astra, Cavalier, Vectra 16DA, 17D
MODEL:
9AT1202 - B(41MM)
Petrol / 1.2 / 1.4 / 1.6 S.O.H.C
Corsa B / C , Combo, Astra-F, Vectra-B
C12NE, X12SZ, C14NZ, X14NZ, C14SE
X14SZ, X16SZ, X16SZR, Z16SE
CONTENTS :
• A - tension adjustment wrench
(46mm)
• B - tension adjustment wrench
(41mm)

VAUXHALL/OPEL
Diesel Engine Setting & Locking Set
9AT2004E

Engine Series
▪ The set includes flywheel locking pin, camshaft
setting tools, tensioner locking pin 4 CHAIN
D
▪ Use to retain timing position only. DO NOT PC.
use them to hold camshafts in position while
releasing or tightening the sprocket bolt

g
1100.5 1 / 10

Diesel 1.3D CDTi (Chain)

Agila (03-08), Agila-B (08-09)
MODEL: Corsa / Combo-C (03-09), Corsa-D (08-09)
Tigra-B(04-09), Meriva (04-09) CONTENTS :
Astra-H (05-09) • A - camshaft setting tool set (pair)
• B - flywheel locking pin
• C - tensioner retaining pin
ENGINE Diesel 1.3D CDTi (Chain)
CODE: Z13DT, Z13DTH, Z13DTJ

551
 VAUXHALL/OPEL
Diesel Engine Setting & Locking Set
9AT2005E
▪ The set includes crankshaft locking tool, camshaft
setting tools(pair) and a tensioner locking pin
5 BELT
D
PC.
▪ Suitable for Saab, Vauxhall / Opel engine
▪ Use to set and lock engines timing

g
1295.0 1 / 10

Diesel 1.9D CDTi / 2.0D CDTi(Belt)

Astra-H (04-09), Vectra-C(04-08)
MODEL:
Signum (04-08), Zafira-B (05-09)
Insignia (08-09)

Diesel 1.9D CDTi / 2.0D CDTi(Belt) CONTENTS :

1.9CDTi • A&D - crankshaft locking tools
ENGINE Z19DT, Z19DTH, Z19DTJ, Z19DTL • B - camshaft setting tool (pair)
CODE: 2.0CDTi • C - tensioner locking pin
A20DT, LBS, A20DT, LBX, A20DT, LBY Camshaft housing
A20DT, LCD

VAUXHALL/OPEL
Diesel Engine 2.0 / 3.0 Timing Set
Engine Series

9AT2007E
▪ The set includes camshaft setting plate, tensioner
7 CHAIN
retaining pin set and flywheel locking pin D
PC.
▪ Suitable for BMW 2.0 and 3.0 liters common
rail diesel engines in BMW 3, 5 & 7 Series, X5,
Land Rover Freelander, Range Rover, Rover 75,
Vauxhall / Opel
▪ Use to check and adjust the timing position of
camshaft and TDC position of crankshaft
g
1752.5 1 / 10

Diesel (Chain)
MODEL:
Omega-B(01-03)
CONTENTS :
• A – camshaft setting plate
• B – camshaft plate locking tool
ENGINE Diesel (Chain) • C – tdc timing pin
CODE: Y25DT • D – tensioner retaining pin set (pair)
• E – flywheel locking pin

552
VAUXHALL/OPEL
Diesel Engine Setting & Locking Set
9AT2008E
▪ The set includes auxiliary belt tensioner locking 8 CHAIN
pin, camshaft setting tools, crankshaft pulley PC. D
holding tool, chain tensioner locking pin and
crankshaft locking pin
▪ Suitable for 2.0 dCi chain drive engines of
Renault, Nissan and Vauxhall / Opel

g
2375.5 1/5

MODEL: Vivaro (07-08)

CONTENTS :
ENGINE M9R • A&H – camshaft gear alignment tool
CODE: 780/782/784 • B&C – camshaft setting plate
• D – crankshaft locking pin
• E – auxiliary belt tensioner locking pin
• F – crankshaft pulley holding tool
• G - chain tensioner locking pin

VAUXHALL/OPEL
Diesel Engine 2.5TDS Timing Set

Engine Series
9AT2106E
▪ The set includes camshaft setting plate ,
tensioner lever , tensioner retaining pin , 6 CHAIN
PC. D
flywheel locking pin and pump remove &
sprocket retainer
▪ Suitable for BMW, Land Rover and Opel engines
▪ Use to retain and support the sprocket and
timing chains in position when the pump is
removed

g
2480.0 1/5

CONTENTS :
• A – camshaft setting plate
MODEL: Omega-B (94-01)
• B – tensioner lever
• C – flywheel locking pin
• D – tensioner retaining pin
• E – pump remove & sprocket retainer (2 part)
ENGINE 2.5D Turbo (Chain)
CODE: X25DT

553
 VAUXHALL/OPEL
Diesel Engine Setting Tool (Belt Drive)
9AT2-A01
▪ The set includes flywheel locking pin, TDC timing
pin and tensioner retaining tool D BELT
▪ Use for holding engine timing position when
replacing timing belt
▪ Suitable for Fiat, Iveco, Renault, Citroen/
Peugeot, Vauxhall/Opel
g
112.2 12 / 120

2.5D / 2.8D
MODEL: Arena (97-01)
Movano (98-03)

A B C
S8U
ENGINE 770, 772
CODE: S9W CONTENTS :
700, 702 • A – TDC Timing Pin
• B – Flywheel Locking Pin (2pc)
• C – Tensioner Retaining Tool

VAUXHALL/OPEL
Diesel Injection Pump Puller
9AT2-D01
Engine Series

▪ Specifically designed for holding the sprocket

/ chain in place when disassembling the VP44 D CHAIN
injection pump and high pressure pump
▪ Common rail fits BMW engines

g
528.0 6 /36

MODEL: Omega - B (01-03)

ENGINE Y25DT
CODE:

554
VAUXHALL/OPEL
Petrol Engine Flywheel Holding & Locking Tool
9AT2-E01
▪ Use to remove the crankshaft pulley while
replacing the timing belt P BELT
▪ Put into the teeth firstly, fix steadily on the
housing according to manufacturer’s guidelines
g
38.8 20 / 100
Flywheel
Astra (86-91)
Astra-F + G (91-98)
MODEL:
Ascona-C / Cavalier (86-88)
Vectra A (89-95)

ENGINE 16DA, 17D, 17DR, 17DTL

CODE:

VOLVO
Petrol Engine Timing Locking Set
9AT1005E
▪ The set includes revised design camshaft setting
5 CHAIN BELT
plate and tensioner locking pin PC. P
▪ Suitable for all later DURATEC petrol engine
▪ Use to ensure timing position is fixed and maintained
correctly during engine timing application
g
1051.0 1 / 10

1.6 / 1.8 / 2.0 16v. Twin Cam (Belt / Chain)

MODEL: S40 / V50 (04-09)
C30 (06-09)

Engine Series
1.6 / 1.8 / 2.0 16v. Twin Cam (Belt / Chain)
1.3 16v
B4164S3(Belt) CONTENTS :
ENGINE 1.8 16v • A - crank TDC location pin
CODE: • B - crank TDC location pin
B4184S11(Chain)
• C - camshaft setting plate
2.0 16v
• D - timing belt tensioner locking pin
B4204S3(Chain)
• E - crank holding tool (+crank pulley bolt tightening)

UNIVERSAL
Camshaft & Injection Pump Sprocket Holding Tool
9AT3-A01
▪ Use to counter hold camshaft or injection pump
sprocket to release the retaining bolt
▪ For universal diesel and petrol engine Camshaft Sprocket
g Exhaust
911.6 6 / 24 Camshaft Sprocket Intake

1/2 Notch Location

555
 UNIVERSAL
Universal Camshaft Pulley Holding Wrench
9AT3-A02
▪ Use to hold camshaft pulley while loosening and
9
tightening cam sprockets center bolt PC.
▪ Designed with 4 pair groove pins 7, 10, 14, 16mm
▪ Adjustable swivel jaw both side application for
most engine
▪ Capacity : 40 ~ 140mm (1-1/2" ~ 8-5/8")
▪ For universal engine, especially O.H.C. overhead
cam engines cars
g 1000.0 1/6

Camshaft Sprocket Puller

9AT3-A04
▪ Use to hold and remove the camshaft sprocket
without damaging the sprocket
▪ Use with 3/8" square drive tool or 19mm wrench
▪ Suitable for most sprockets from Ø60 to Ø100 mm
Engine Series

Capacity g
KT NO.
mm

9AT3-A04 60~100 1437

556
UNIVERSAL
Belt Tensioner Lock Pin Set
9AT3-B01
▪ Designed for retaining tensioner plunger in fixed
position while replacing timing belt
▪ Suitable for common vehicle and engine
g 17.2 20 / 100

CONTENTS :
• 0.79mm / .0310"
• 1.21mm / .0476"
• 1.41mm / .0560"
• 1.51mm / .0594"
• 1.71mm / .0670"
• 1.92mm / .0760"

UNIVERSAL
Dial Test Indicator
9AT3-F01
▪ Use to measure and accurately find the
piston TDC position 9AT3-F01

▪ This tool has to use with TDC Indicator

9AT3-F02
g 63.0 1 / 100
9AT3-F02

Engine Series
UNIVERSAL
TDC Indicator
9AT3-F02
▪ Use to measure if the cylinder piston is at TDC
position
▪ This tool has to use with Dial Test Indicator 9AT3-F01
g
292.4 30 / 30

557
 Hose Clamp KT Item Suitable Car
Brand

9AA11

9AA13

9AA16
Universal
VW(Intake), VW, Audi, Opel,
Honda, Ford

9AA21

9AA31

Hose Clamp
9AA32
Engine Series

VW, Audi, Seat, Skoda,

Lamborghini
9AA17
Hose Clamp

CLIC Clamp CLIC-E Clamp

VW, Audi, Citroen/Peugeot,
9AA15
Fiat, Mercedes-Benz, Opel,
Renault, Ford, Volvo

CLIC-R Clamp CLIC-GR Clamp 9AA25

Universal
1453-05 / 1453-06 / 1453-07
1453-08 / 1453-10

Screw Clamp Worm Drive Clamp

558
Straight Hose Clamp Pliers
9AA11
▪ Use to remove and install spring clamp
▪ Swivel V-shaped jaws
▪ Suitable for universal cars, especially VW, Audi, Opel, Honda, Ford

Ø L g
KT NO. mm inch mm
9AA11 55 8-21/32 220 220.1 12 / 72

Wire Hose Clamp Pliers

9AA13
▪ Use to remove and install wire clamp
▪ Swivel jaws
▪ Suitable for universal cars, especially Corbin heater hose

Engine Series
Ø L g
KT NO. mm inch mm
9AA13 51 8-21/32 220 238.4 12 / 72

Flat Band Hose Clamp Pliers

9AA16
▪ Use to remove and install spring clamp
▪ Swivel concave jaws
▪ Suitable for universal cars, especially VW, Audi, Opel, Honda, Ford
L

Ø L g
KT NO. mm inch mm
9AA16 60 8-21/32 220 213.0 12 / 72

559
 Curved Hose Clamp Pliers
9AA21
▪ Use to remove and install spring clamp
▪ 45° swivel concave jaw with greater access in confined spaces
▪ Suitable for universal cars, especially VW, Audi, Opel, Honda, Ford

Ø L g
KT NO. mm inch mm
9AA21 53 8-21/32 220 224.0 12 / 48

Flexible Hose Clamp Pliers

9AA31 9AA32
▪ Use to remove and install spring clamp
▪ Flexible flat jaw with greater access in confined spaces
▪ Suitable for universal cars 9AA31

L2

L1

9AA32
Engine Series

Ø L1 L2
KT NO. g
mm inch mm inch mm
9AA31 53 25 630 9 225 528.0 12 / 36
9AA32 77 27-1/4 700 12 310 755.6 6 / 24

Fuel Line Hose Clamp Pliers

9AA17
▪ Use to remove and install fuel line clamp
▪ Special pick jaws
▪ Suitable for VW, Audi, SEAT, Skoda

Ø L g
KT NO. mm inch mm
9AA17 27 6-3/4 171 188 12 / 60

560
CLIC Hose Clamp Pliers
9AA15
▪ Use to remove and install CLIC and CLIC-R clamp
▪ Special-designed jaws
▪ Suitable for VW, Audi, Opel, Citroen, Peugeot, Fiat, Renault, Mercedes-Benz

Ø L g
KT NO. mm inch mm
9AA15 36 5-19/32 142 222.6 12 / 72

360° CLIC Hose Clamp Pliers

9AA25
▪ Use to remove and install CLIC and CLIC-R clamp 360°
▪ 360° swivel angle
▪ Suitable for VW, Audi, Opel, Citroen, Peugeot, Fiat, Renault, Mercedes-Benz
L

Engine Series
Ø L g
KT NO. mm inch mm
9AA25 32 7 175 224.0 12 / 72

Flexible Nut Spinner

1453
▪ Shank material - chrome vanadium alloy steel
▪ Grip material - PP + TPR
▪ Shank finishing - chrome plated
▪ Use to remove and install hose clamp of
common cars, especially for BMW & Audi

KT NO. g
mm mm mm mm

1453-05 5 9 190 300 136 12 / 144

1453-06 6 9 190 300 135 12 / 144
1453-07 7 9.3 190 300 134 12 / 144
1453-08 8 9.5 190 300 133 12 / 144
1453-10 10 9.5 190 300 132 12 / 144

561
 Hose Clamp Pliers Set
9AA01
▪ Applicable to most hose clamps of flat band,
worm drive and Clic type 11
▪ Use for removing and installing common hose PC.
clamp type
▪ The set includes KT items:
9AA13 - Wire Hose Clamp Pliers
9AA16 - Flat Band Hose Clamp Pliers
9AA17 - Fuel Line Pliers
9AA21 - Curved Hose Clamp Pliers
9AA25 - 360 CLIC Hose Clamp Pliers
9AA31 - Flexible Hose Clamp Pliers
1453 - Flexible Hex Nut-Driver (05,06,07,08,10mm)
g
3680.0 1/5

Fuel Line Pliers

9AB11 9AB12
▪ Improved type can also use for fuel lines with ▪ For removal and replacement of the
plastic snap-together connectors connections on the in-line fuel filter
▪ Use for VW-Audi, Fiat, GM, Opel/Vauxhall, ▪ Use for VW, PSA , Fiat, Opel
Mercedes-Benz

L g
KT NO. inch mm
Engine Series

L g
KT NO.
9AB11 9 228 312.0 12 / 72 inch mm
9AB12 6 150 87.0 12 / 144

Piston Ring Compressor

9AC
▪ The square adjustment key wrench forces the
rings into the grooves and the clutch prevents
it from expanding

capacity

H Ø Capacity g
KT NO. inch mm inch mm
9AC125-32 3-1/4 80 2-1/4~5 57~125 260.0 20 / 60
9AC125-40 4 100 2-1/4~5 57~125 280.0 20 / 60
9AC175-32 3-1/4 80 3-1/2~7 90~175 300.0 20 / 60
9AC175-40 4 100 3-1/2~7 90~175 320.0 20 / 60
9AC175-66 6-3/4 165 3-1/2~7 90~175 530.0 20 / 60

562
Valve Stem Seal Pliers
9AD11
▪ For removing valve stem seals in multi-valves engine
▪ Jaw longitudinal toothed - avoids slipping down
▪ For deeply leveled valve stem seals

L Ø
KT NO. g
inch mm mm
9AD11 11 275 9.5 400.0 12 / 48

Swivel Oil Filter Wrench

9AE31
▪ Professional swivel PVC dipped handle
▪ Easy to bend in different positions for reaching into narrow spaces

Ø Capacity
KT NO. g
mm
9AE31-73 60~73 274.8 6 / 36

Engine Series
9AE31-85 73~85 283.4 6 / 36
9AE31-95 85~95 300.0 6 / 36
9AE31-111 95~111 306.8 6 / 36
9AE31-121 110~121 309.0 6 / 36
9AE31-134 120~134 321.6 6 / 36

Band Type Oil Filter Wrench

9AE32
▪ Adjustable metal band
▪ Suitable for filters between Ø65mm to Ø155mm

Ø Capacity g
KT NO. mm
9AE32-110 65~110 246.0 25 / 50
9AE32-155 110~155 251.6 25 / 50

563
 Quick Grip Oil Filter Wrench & Set
9AE33
▪▪Quick-adjustable tightening design
▪▪Band type allows for narrow space The design offers a
▪▪Non-slip reaction teeth provides better grip stronger clamping force
▪▪9AE33-110: Suitable for 65~110mm oil filters
▪▪9AE33-155: Suitable for 110~155mm oil filters Ø

Ø Capacity g
KT NO. mm
9AE33-110 65~110 305.4 25 / 50
9AE33-155 110~155 311.0 25 / 50

9AE33-110-S 9AE33-155-S
6 6
PC. PC.
Engine Series

Kg 2.70 1/2 Kg 2.70 1/2

KT NO. Contents KT NO. Contents

9AE33-110-S 9AE33-110 9AE33-155-S 9AE33-155

Strap Wrench
3203
▪▪Strap wrench for oil filter

▪▪Strap for 3203

3.5mm
16mm

530mm

g
320300 46 80
▪▪Strap for 3203A0
Capacity Overall length
KT NO. g
mm inch mm 3.5mm
16mm

3203 Ø 60~140 8-3/4 223 242.0 50 990mm

3203A0 Ø 60~260 8-3/4 223 300.0 50

g
320301 73 80

564
Strap Wrench
320670
▪▪Aluminum alloy handle and strong nylon strap for tight grip
▪▪Suitable for oil filter or any polished pipe

▪▪Nylon strap for 320670 Serrated makes

2.0mm grip tight

25mm
780mm

g
320600 34.6 50

Overall length Capacity g

KT NO. inch mm mm
320670 12" 295 Ø 60~180 343.8 50

320760
▪▪Strap wrench for oil filter
▪▪Use with 1/2" square drive tool

Engine Series
Overall length Capacity
KT NO. g
inch mm mm
320760 11" 280 Ø 60~160 255.5 12 / 72

Chain Wrench
3204
▪▪Chain wrench for oil filter

Capacity Overall length g

KT NO. mm inch mm
3204 Ø 60~140 8-3/4 225 359.0 50

565
 Chain Wrench
3205
▪ Heavy duty oil filter chain wrench, specially for auto, truck and agricultral equipment
▪ Flexible in confined space
▪ Suitable for all types of oil filters

Swiveling

Capacity Chain length g

KT NO. mm mm
320540 Ø 60~105 350 742.0 6 / 24
320560 Ø 60~160 520 880.0 6 / 24

• Adjust to appropriate size of • Release the chain to reinstate it.

the oil filter.

Cup Type Oil Filter Wrench

9AE1
▪ 3/8" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs)
▪ Coated with electro-black oxide finish
for protection against rust
▪ Cup-type design, reduce the possibility
to damage oil filters
Engine Series

KT NO. g

64mm(2-1/2)-14 flutes
9AE1-6414 TOYOTA 4 Cylinder (1800CC.2000CC) ,ALLION, AURIS, COROLLA AXIO, ISIS, IST, 164.2 12 / 72
COROLLA RUMION, COROLLA FIELDER, NOAH, PREMIO, PRIUS, VOXY, WISH, etc…

9AE6
▪ 1/2" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs)
▪ Coated with electro-black oxide finish
for protection against rust
▪ Cup-type design, reduce the possibility
to damage oil filters

KT NO. g

65mm(2-9/16")- 14 flutes
9AE6-6514A Fits Nissan, Fiat Champ, Hasting. GM/AC, Wix, NAPA, Purolator, Daihatsu, Toyota, - 12 / 72
Nissan, etc…
74mm(2-29/32")-14 flutes
9AE6-7414 Audi, Volkswagen, BMW, Citroën, Peugeot, Ford, Fiat, Lancia, Mazda, Mercedes- 152.8 12 / 72
Benz, Nissan, Vauxhall, Opel, Porsche, Renault, Suzuki, Toyota, etc...
84 mm(3-3/10")-14 flutes
9AE6-8414 194.2 12 / 72
Mercedes Benz V6/V8 CDi models, etc…

9AE6-9915 Hyundai Tucson 2.0 - 12 / 72

566
Cup Type Oil Filter Wrench Set
9AE2002
▪ 3/8" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs.) 2
PC.
▪ Coated with electro-black oxide finish for
protection against rust
▪ Cup-type design, reduce the possibility to
damage oil filters

KT NO. Applicable models g

282.0 1 / 40

65mm(2-9/16")- 14 flutes
9AE2-6514 Fits Nissan, Fiat Champ, Hasting. GM/AC, Wix, NAPA, Purolator, Daihatsu,
Toyota, Nissan, etc…
65 & 67mm(2-9/16" & 2-21/32")–14 flutes
9AE2-6567 Fits same filters as made in Canada including, PH4386, PH4967, PH6017,
PH6018, Daihatsu, Toyota, etc…

9AE2004
▪ 3/8" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs) 4
▪ Coated with electro-black oxide finish PC.
for protection against rust
▪ Cup-type design, reduce the possibility
to damage oil filters

KT NO. g
571.0 1 / 20

Engine Series
66 mm(2-19/32")-6 flutes
9AE2-6606
Fiat (Punto, 1.2), Renault (Clio1.2 Express, Kangoo, Rapid, Twingo), etc…
76mm(3")-8 flutes
9AE2-7608
Fiat (z.B. Marea), Lancia (z.B. Delta), etc…
76mm(3")-14 flutes
Fits Champion, Champ Lee, Purolator, Mopar, VW, Porsche, Mercedes-Benz,
9AE2-7614
BMW,
Audi (I.B.A3TD) Opel, etc…
93mm(3-21/32")-15 flutes
Fits Casite, Champ, Champion, GM, Fram, Hastings, Opel, Mazda, Volvo,
9AE2-9315
Mitsubishi, Purolator, Wix, Nissan, VW, Porsche, Renault, Ford, Honda, Audi,
etc…

9AE6002
▪ 1/2" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs.)
2
PC.
▪ Coated with electro-black oxide finish for
protection against rust
▪ Cup-type design, reduce the possibility to
damage oil filters
KT NO. Applicable models g
282.0 1 / 40

65mm(2-9/16")- 14 flutes
9AE6-6514 Fits Nissan, Fiat Champ, Hasting. GM/AC, Wix, NAPA, Purolator, Daihatsu, Toyota, Nissan, etc…
65 & 67mm(2-9/16" & 2-21/32")–14 flutes
9AE6-6567 Fits same filters as made in Canada including, PH4386, PH4967, PH6017, PH6018, Daihatsu, Toyota, etc…

567
 Cup Type Oil Filter Wrench Set
9AE2016
▪ 3/8" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs.) 16
▪ Coated with electro-black oxide finish for protection PC.
against rust
▪ 1 PC. 1/2"(F)x3/8"(M) adapter
▪ 1 PC. 3 legged oil filter wrench(63-102mm)

KT NO. Kg
4.0 1/5

66mm(2-19/32")-6 flutes
9AE2-6606 Fiat(Punto, 1.2), Renault(Clio 1.2 Express, Kangoo. Rapid. Twingo), etc....
74 & 76mm(2-29/32" & 3")-15 flutes
9AE2-7476 Fits Fram, AC, Saturn, Opel, VW, Audi, Mercedes, etc....
76mm(3")-8 flutes
9AE2-7608 Fiat(z.B. Marea), Lancia(z.B. Delta), etc....
76mm(3")-12 flutes
9AE2-7612 Fiat(z.B. Ducato, Scudo, Ulysee),Renault, (Megane, Laguna, Espace lll.), etc....
76mm(3")-14 flutes
9AE2-7614 Fits Champion, Champ Lee, Purolator, Mopar, VW, Porsche,Mercedes, BMW,
Audi, Toyota, Opel, etc....
Engine Series

86mm(3-3/8")-16 flutes
9AE2-8616 Volvo(S40, S60, S70, S80) etc....
86mm(3-3/8")-18 flutes
9AE2-8618 VW. Golf.(MKIII. Tdi, Passat Tdi), Audi A6 Tdi, Renault(Clio, Rapid 1.9D,
Laguna.Safrane. Espace 2.1D). Citroen, Peugeot, Renault, etc..
92mm(3-40/64")-10 flutes
9AE2-9210 Fiat, Cinquecento, Coupe, Croma, DAF, Fiat, Panda. Regata, Ritmo Fiat, Seicento.
Tempra, Tipo, Lancia(Beta. Dedra. Kappa. Monte. Carlo. Prisma. Thema. Trevi), etc....
93mm(3-21/32")-15 flutes
9AE2-9315 Fits Casite, Champ, Champion, GM, Fram, Hastings,Purolator, Wix, Nissan,
Volvo, Mazda, Audi, VW, Porsche, Renault, etc....
93mm(3-21/32")-45 flutes
9AE2-9345 VW-Audi.(TDi 2.4, 2.6, 2.8L), etc....
96mm(3-3/4")-18 flutes
9AE2-9618 Audi(A4 Tdi, VW Passat,97 Tdi), Renault (Laguna 2.2d. Safrane2.2D.
Espace 2.2D. R19 2.2D. Rapid, Megane,1.9/2.1D. Tdi) etc..
106mm(4-11/64")-15 flutes
9AE2-10615 Fiat(Ducato 2.5D. Td), etc....

108mm(4-8/32")-15 flutes
9AE2-10815 Volvo(C70. S70. V70. Tdi. TD)(850 Tdi. TD) etc....

108mm(4-8/32")-18 flutes
9AE2-10818 Renault(Espace, Laguna, Master, Safrane, Traffic 2.4, 2.5, 2.8D. TD), etc....

9AE423 3 legged oil Filter Tool 63-102mm(2-1/2" to 4")

9AE221 1/2" drive adaptor 1/2" F x 3/8" M

568
Cup Type Oil Filter Wrench Set
9AE6030
▪ 1/2" square drive
▪ Withstands up to 115.2 Nm(85 ft.lbs.)
▪ Coated with electro-black oxide finish for
30
PC.
protection against rust
▪ Cup-type design, reduce the possibility to
damage oil filters
▪ Suitable for 3/8" or 1/2" drive tool

KT NO. Kg 6.67 1/3

65mm(2-9/16")- 14 flutes 90mm(3-17/32")-15 flutes
9AE6-6514 Fits Nissan, Fiat Champ, Hasting. GM/AC, Wix, NAPA, 9AE6-9015 Fits Honda (Accord). Mitsubishi. Mopar. Isuzu, etc...
Purolator, Daihatsu, Toyota, Nissan, etc…
92mm(3-40/64")-10 flutes
65 & 67mm(2-9/16" & 2-21/32")–14 flutes
Fiat, Cinquecento, Coupe, Croma, DAF, Fiat, Panda,
9AE6-6567 Fits same filters as made in Canada including, PH4386,
PH4967, PH6017, PH6018, Daihatsu, Toyota, etc… 9AE6-9210 Regata, Ritmo Fiat, Seicento. Tempra, Tipo, Lancia
(Beta. Dedra. Kappa. Monte. Carlo. Prisma. Thema.
66 mm(2-19/32")-6 flutes
Trevi), etc…
9AE6-6606 Fiat (Punto, 1.2), Renault (Clio1.2 Express, Kangoo.
93mm(3-21/32")-15flutes
Rapid. Twingo), etc…
Fits Casite, Champ, Champion, GM, Fram, Hastings,
68mm(2-11/16")-14 flutes 9AE6-9315 Opel, Mazda, Volvo. Mitsubishi, Purolator, Wix, Nissan,
Fits Hastings, Mazda, Ford Escort, Capri, Subaru, Fran,
9AE6-6814 PH6607 (Those Fram Filters Made in Korea), Motorcraft,
VW, Porsche, Renault, Ford, Honda, Audi, etc…
93mm(3-21/32")-36 flutes
FL816, etc…
73mm(2-7/8")-14 flutes
9AE6-9336 Fits Ford, Motorcraft only-FL1A, (FLA1B, FL300, FL820
9AE6-7314 Fits Toyota/Lexus, etc…
Ford), etc…
93mm(3-21/32")-45 flutes
74mm(2-29/32")-15 flutes 9AE6-9345

Engine Series
9AE6-7415 MF, Audi (#056-115-561g), GM. Rover, Chrysler, etc…
VW-Audi, (TDi 2.4, 2.6, 2.8L), etc…
95mm(3-6/8")-15 flutes
74 & 76mm(2-29/32" & 3")-15 flutes 9AE6-9515
9AE6-7476 Fits Fram, AC, Saturn, Opel, VW, Audi, Mercedes, etc…
Toyota (#15600-41010) Alfa Romeo, GM, Ford, Chrysler.
96mm(3-3/4")-18 flutes
75 & 77mm(2-15/16" & 3-1/32")-15 flutes
Audi (A4.A6, TDi), VW (Passat 97 TDi), Renault (Laguna
9AE6-7577 Fits VW, Audi, Casite, GM/AC, Hastings, Wix, NAPA, 9AE6-9618 2.2D, Safrane2.2D. Espace2.2D.R19 2.2D. Rapid.
Ford, Isuzu, Mercedes, Opel, etc…
Megane, 1.9/2.1D.TDi), etc…
76mm(3")-8 flutes
9AE6-7608 Fiat (z.B. Marea), Lancia (z.B. Delta), etc… 100mm(3-15/16")-15 flutes
9AE6-10015 Fits Fram, Motorcraft, Wix, Isuzu, Mitsubishi, etc…
76mm(3")-12 flutes
9AE6-7612 Fiat (z.B. Ducato, Scudo, Ulysee), Renault, (Megane, 106mm(4-11/64")-15 flutes
9AE6-10615 Fiat (Ducato 2.5D.Td), etc…
Laguna, Espace III), etc…
76mm(3")-14 flutes 108mm(4-8/32")-15 flutes
Fits Champion, Champ Lee, Purolator, Mopar, VW, 9AE6-10815 Volvo (C70.S70.V70.TDi.TD) (850 TDi. Turbo Diesel)
9AE6-7614 Porsche, Mercedes, Benz, BMW, Audi (I.B.A3TD) Opel,
108mm(4-8/32")-18 flutes
etc…
9AE6-10818 Renault (Espace, Laguna, Master, Safrane, Traffic 2.4 ,
76mm(3")-30 flutes 2.5, 2.8D. TD), etc…
9AE6-7630 Fits Motorcraft only-FL400A, Ford, etc…
78mm(3-2/32")-15 flutes 9AE433 3 legged oil Filter Tool 65-120mm (2-9/16" to 4"-23/32")
9AE6-7815 Nissan (#15028H8991), Ford, Toyota, Honda (Accord),
etc… 9AE221 Adaptor 3/8"or 1/2"Drive Tool
80mm(3-9/64")-15 flutes
9AE6-8015 Fits Opel, Hastings, Fram, Purolator, Nissan, Honda,
Motorcraft, Mazda, Isuzu, Subaru filters.
80 & 82mm(3-9/64" & 3-7/32")-15 flutes
9AE6-8082 Fits Wix Filters. Branded for:Mazda,Subaru,Toyota,Hond
a,Acura,Nissan,NAPA.Etc…
86mm(3-3/8")-16 flutes
9AE6-8616 Volvo (S40, S60, S70, S80), etc…
86mm(3-3/8")-18 flutes
VW. Golf. (MKIII. TDi, Passat TDi), Audi A6 TDi, Renault
9AE6-8618 (Clio, Rapid1.9D, Laguna, Safrane, Espace 2.1D),
Citroen, Peugeot, Renault, etc…

569
 Oil Filter Socket Set
9AE8006
▪ 3/8" square drive
▪ The set includes sizes 24, 27, 30, 32, 36 and 38mm
6
▪ 6 PC. oil filter sockets designed for removal of oil PC.
filter canisters and covers

KT NO. Kg 1.11 12 / 24

Audi
9AE8-24 BMW: 5 / 7 Series (N62) V8 engines from 2004 onward
Cadillac: ATS 36
BMW, Ford, Fiat, GM, Renault, VAG, PSA
9AE8-27 Mercedes-Benz: A-CLASS
Nissan: 1.5 / 1.9 / 2.2 / 2.5 dCi engines
9AE8-30 Audi, Skoda, Seat, VW
GM, VAG
9AE8-32 BMW: 335D, X5 35d(09~10), X5 xDrive 35d(11~13)
Opel / Vauxhall: Astra-G, Corsa-B, Zafira
Audi: A3 2.0(04~08), A4 2.0(04~08)
BMW: M52, M54, M60, M62, M70 & M73 engines
Ford: Mondeo 2.0D 16V Dura Torq engines, Transit 2.5 & 2.0 diesel engines
Engine Series

Jaguar: 2.2D engines

9AE8-36 Mercedes-Benz: 116MB engine Vito CDi
Mini: R56
Opel / Vauxhall: Omega DL 16V, Vectra 2.0, Zafira
VAG: VAG 1.9 SDi (ASY), Golf GTI 2.0, Passat 2.0, VR6
Volvo
BMW, Volvo
9AE8-38 Opel / Vauxhall: Vectra 2 liter diesel engines

570
Three-Legs Oil Filter Wrench
9AE42
▪ The claw-type filter is available for removing all oil
filters from 2-1/2" to 4" (63-102mm) in diameter
▪ Suitable for 3/8" or 1/2" square drive tool
▪ Coated with electro-black oxide finish for protection
9AE221
against rust
▪ CW & CCW direction
A B Ø Capacity
KT NO. g
inch inch inch mm
9AE42 1/2 3/8 2-1/4~4 63~102 395.0 12 / 48
9AE221 1/2 3/8 - - 39.0 -
9AE423 - 3/8 2-1/2~4 63~102 356.0 12 / 48 9AE42
9AE433 - 3/8 2-9/16~4-23/32 65~120 501.6 12 / 36 9AE423

9AE43
▪ The claw-type filter is available for removing
all oil filters from 3" to 4-3/4" (75-120mm) in
diameter
▪ Suitable for 3/8" or 1/2" square drive tool
▪ Heavy duty design
▪ CW & CCW direction

A B Ø Capacity g
KT NO. inch inch inch mm
9AE43 1/2 3/8 3~4-3/4 75~120 603.5 1 / 36

Two Jaws Oil Filter Wrench

9AE52
▪ The claw-type filter is available for removing all oil
filters from 2-3/8" to 3-1/8" (60-80mm) in diameter

Engine Series
▪ Suitable for useing with 1/2" square drive tool
▪ Lost wax coating with electro-black oxide finish
for protection against rust
▪ Specially teeth designed steel jaws

A Ø Capacity
KT NO. g
inch inch mm
9AE52 1/2 2-3/8~3-1/8 60~80 470.0 12 / 48

9AE53
▪ The claw-type filter is available for removing all oil filters
from 2-3/8” to 4-1/2” (60-115mm) in diameter
▪ Suitable for using with 3/8” & 1/2” square drive tool
▪ Coated with electro-black oxide finish for protection
against rust
A Ø Capacity
KT NO. g
inch inch mm
9AE53-80 3/8 2-3/8~3-1/8 60~80 375.0 6 / 36
9AE53-115 1/2 3-1/8~4-1/2 80~115 667.0 6 / 24

571
 Adjustable Oil Filter Pliers
9AE71
▪ Adjustable sizes from 60 to 140mm
▪ Serrated jaws

L Ø Capacity
KT NO. g
inch mm mm
9AE71-90 9 230 60-90 357.2 12 / 72
9AE71-115 10 260 85-115 400.4 12 / 60
9AE71-140 14-1/2 365 100-140 897.4 1 / 20

Locking Grip Oil Filter Pliers

9AE72
▪ Lock and grip oil filters or any irregular shaped
object for quick tightening or removal
▪ Use for adjusting and fastening at any angle

L Ø Capacity g
KT NO. inch mm mm
9AE72 10 254 53-118 458 12 / 48
Engine Series

Hose Pinch & Set

9AF11 9AF113
▪ Adjustable edges ensure no damage to hose ▪ Adjustable edges ensure no damage to hose
▪ For hoses from Ø15 mm up to Ø60 mm ▪ For hoses from Ø15 mm up to Ø60 mm
▪ Suitable for clamping radiator, heater, fuel, ▪ Suitable for clamping radiator, heater, fuel,
coolant and brake hoses coolant and brake hoses
g
244.4 12 / 48 3
PC.
Ø

9AF11-60

9AF11-30

L Ø Capacity
KT NO. g
inch mm mm 9AF11-15
9AF11-15 6-1/8 155 22.4 43.8 12 / 48
9AF11-30 7-9/32 185 35.4 75.6 12 / 48
9AF11-60 10 253 65.2 125.2 12 / 48

572
Steel Line Stopper Set
9AF204
▪ Use to prevent fluid leaks and contamination
▪ Spring loaded design for stopping the flow of
4
PC.
fuel / brake fluid of car pipe
▪ Capacity :
Banjo, 5/16"(8mm), 3/8"(9.5mm), and
1/2"(12.7mm)

g 156 24 / 48

Fuel Gauge & Pump Sender Collar Wrench

9AG11 9AG12
▪ Use for removing and fitting fuel gauge sender ▪ Use for removing and fitting fuel gauge sender
collars to avoid damage collars to avoid damage
▪ 3 jaws to ensure high torque and no risk to ▪ 4 pins to ensure high torque and no risk to
damage plastic collar damage plastic collar
▪ Use with 19mm wrench or socket ▪ Suitable for BMW F01/F02/F25, X3 etc…
▪ Suitable for most collars from 89 to 170mm

Engine Series
Ø

Ø
KT NO. g
mm KT NO. g

9AG11 89~170 1050.0 1 / 12

9AG12 1050.0 1 / 12

Adjustable Fuel Tank Lid Remover

9AG13
▪ Use for removing and fitting fuel gauge sender
collars to avoid damage
▪ Special jaws design, no risk to damage plastic
collar
▪ Use with 3/8” DR.
▪ Suitable for collars from 122 ~ 199mm
g
560.0 1 / 24

573
 Diesel Injector Extractor Tool Valve Spring Compressor Set
9AN021 9AH12
▪ Use to remove injectors without dismantling the ▪ Complete service tool set for OHV & OHC
engine petrol or diesel engines on Audi, Nissan, Toyota,
▪ Suitable for Bosch injectors in Mercedes-Benz CDI Chrysler, Honda, Mazda, Mitsubishi, Saturn,
engines 2.1 L and 2.2 L Lexus, Hyundai, Infiniti, Porsche, Volvo, VW
▪ Application : Benz for Vito, Sprinter, Viano, C Kg
3.75 1/5
class, E class, CLC, CLK 10
PC.
Kg
2 1/6

Valve spring compressor set 9AH025

▪ Suitable for large engines & diesel engines
9AH31 ▪ Capacity: 35~140mm
▪ Use for compress of motorcycle or small engines ▪ Unique direct action compressor lever gives
valve spring improved visibility & ease of using in areas of
▪ Adapter size : 16mm, 19mm, 23mm, 25mm and difficult access. Dual size in 25 and 30mm adapter
Engine Series

30mm.
▪ Capacity : 130mm. 5
▪ Throat depth : 100mm PC.
Kg
1.31 1 / 12

100

130

A B L
KT NO. Kg
mm mm mm
9AH025 35~140 280 390 4.56 1/5

574
Valve Lappers
9AH0311
▪ For hand lapping valves
Kg
0.1 12 / 108

KT NO. Diameter Cups Size

9AH0311A 1-1/8" (29mm) 1-3/8" (35mm)

9AH0311B 5/8" (16mm) 13/16" (21mm)

Heavy Duty Air Valve Lapper Set

9AH0321
▪ Design for operating in tough environments
▪ Adjustable speed regulator for precise control 5
during operation PC.
▪ Complete with rubber caps of 20mm, 30mm,
35mm and 45mm

Biowes Per Minute Pistone Stroke Overall Length Air Inlet Air Hose Average Air Consumption Kg
KT NO.
mm inch mm inch mm inch mm Cfm L/min

9AH0321 5600 1.1 29 9.0 228 1/4 3/8 2.5 71 1.82 1 / 10

Engine Series
Lambda Oxygen Sensor Socket
9AJ3122 3/8" 9AJ4322 1/2"
▪ For installing and removing the oxygen sensor ▪ For lambda probes
▪ Offset design for confined areas ▪ Featuring a slot for the connecting lead

KT NO. D1 D2 ℓ L g

KT NO. D1 D2 ℓ L g
mm mm mm mm mm
mm mm mm mm mm 9AJ4322 22 32 30 30 85 294 5/60
9AJ3122 22 34 38 8 34 178.0 1 / 100

575
 Lambda Oxygen Sensor Socket Set
9AJ017 3/8"+1/2"
▪ 7 PC. special sockets for removal lambda / oxygen
sensors 7
▪ Suitable for most vehicles : Volkswagen, BMW, PSA, PC.
Mercedes-Benz, Ford, etc…
kg 1.80 1 / 10

KT NO. Part. Size mm

9AJ4229 1/2" 29
9AJ3322 3/8" 22
9AJ4227 1/2" 27
9AJ3222 3/8" 22
9AJ3127 3/8" 27
9AJ4122 1/2" 22
9AJ3122A 3/8" 22

Universal Clutch Aligner Set

9AK11
▪ Designed to make alignment and assembly of
clutch 3
PC.
▪ Specially designed for those vehicles equipped
with late-model front wheel drives without pilot
bearing in flywheel

Ø
KT NO. Kg
mm
Ø 23 ~ 27mm
9AK11 15.5~27 0.6 1 / 20
Engine Series

Ø 19 ~ 23mm

Ø 15.5 ~ 20mm

Self Adjusting Clutch Alignment Setting Tool Set

9AK21
▪ Prevent damage to system and to keep adapter ring in 38
right position PC.
▪ Necessary for pre-tensioning self adjusting clutches before
removal or installation, avoiding clutch deformation
▪ Prevents plate distortion
▪ Suitable for most SAC(Self Adjusting Clutches 3 and 4 holes)
equipped on vehicles of FIAT GROUP, VW-AUDI, BMW,
MERCEDES, VOLVO, OPEL, RENAULT etc
Kg
10.75 1/2

576
Pulley Removing Wrench
9AL
▪ To lock the pulley during removing or assembling
any type of pulley retaining bolt V-Belt Pulleys

L Ø 9AL11
KT NO. g
inch mm mm
9AL11 14-3/8 365 40~140 540.0 12 / 36
9AL12 14-3/8 365 40~140 540.0 12 / 36 Poly-V Belt Pulleys

9AL12

1 2 3 4

• Compressors • Water pump • Alternator • Oil filter removal

2
1 pulley pump pulley & assembly

Universal Cooling Pump and Refiller Tool Set

9AM01
▪ For testing leakage in radiator system
▪ Vacuum leakage testing and bubble-free refilling
7
PC.
▪ Special pick hooks to speed up replacement of
pipes
▪ Quick-release coupling on each connections
▪ Rubber cones with functional diameter 17~40mm

KT NO. Type Kg

9AM010 Japan 2.68 1/5

Engine Series
9AM011 USA 2.68 1/5
9AM012 Europe 2.68 1/5

DO NOT open the radiator cap on

a hot engine

Piston Ring Pliers

9AP
▪ For removing and
mounting piston rings
▪ Nickel plated

L Ø Capacity g
KT NO. inch mm mm
9AP100 8-11/32 212 50~100 323.0 12 / 48
9AP120 8-15/16 227 80~120 354.0 12 / 48
9AP160 9-61/64 253 110~160 458.0 12 / 48
9AP100
9AP120
9AP160

577
 Oil Drain Plug Key Set
9AR11
▪ Suitable for sump plugs on engine, gearbox and back axle
▪ Contents: 21
Hex key socket: H8, H9, H10, H12, H13, H14, H17 mm PC.
Square socket: 5/16", 3/8", 7, 8, 10, 11, 12, 13, 14 mm
Torx socket: T45
Triangular socket: 10mm
Spline (TAMPER) socket: M16
Square drive socket: 10mm
3/8" drive sliding T-handle
Kg
1.70 1 / 10

Diesel Injector Puller Set

9AS11
▪ The set contains M8, M12, M14, M17 adaptor
▪ Suitable for various vehicles with Bosch and Lucas
type diesel injectors
▪ Remove stubborn diesel injectors easily and quickly
▪ New M17 adaptor for GM Vauxhall / Opel injectors
X20DTH / Y20DTH series engines
Kg
1.11 1 / 20
Engine Series

Square Socket
4014M 1/2"
▪ 4 ball retaining grooves
▪ Use for oil plug
▪ Suitable for
401408M: Peugeot, Nissan, Renault
401410M: Ford, Peugeot, Mazda

KT NO. D ℓ L g
mm mm mm mm
401408M RB8.0 23.5 13.5 35 60.0 10 / 200
D

401409M RB9.5 23.5 13.5 35 68.0 10 / 200

401410M RB10.0 23.5 13.5 35 72.0 10 / 200
401411M RB10.5 23.5 13.5 35 78.0 10 / 200
L
401412M RB12.0 23.5 13.5 35 90.0 10 / 200
401413M RB12.7 23.5 13.5 35 97.0 10 / 200
401414M RB13.5 23.5 13.5 35 106.0 10 / 200
401419M RB19.0 25.0 13.5 40 130.0 10 / 160

578
Double Size "L" Handle Ribe Socket M12S
1586 9AW4901 1/2"
▪ Material : Chrome vanadium alloy steel ▪ 6 points
▪ For oil plug ▪ Use for replacing and removing engine head screw
and flywheel center screw on NISSAN models

D1
ℓ
10mm L
(3/8")

8mm KT NO. D1 ℓ L g
(5/16") mm mm mm
9AW4901 22 14 38 72.0 10 / 200

KT NO. Overall length Size g

Universal Joint
inch mm inch mm
• Material - chrome vanadium alloy steel
1586-09 9 230 5/16 x 3/8 8 x 10 320.0 6 / 48 • Finishing - polished, chrome plated

3794 4794 3/8" & 1/2"

1596 ▪ 30° rotation
▪ Short patterned design enables greater access
▪ Material : Chrome vanadium alloy steel
in confined spaces
▪ For oil plug 10mm
(3/8")

Ø18 Ø24.8

30°
30°

8PT. 10mm
(3/8")
46 60
Overall length Size g
KT NO. 3794 4794
inch mm inch mm

Engine Series
L g
KT NO. Drive
1596-09 9 230 3/8 x 3/8 10 x 10 290.0 6 / 48 inch mm
3794 3/8" 1-4/5 46 45.0 15 / 300
4794 1/2" 2-3/8 60 106.0 5 / 180

Ribe Socket M10S Bit

• Silicon chrome vanadium alloy steel (S2)
9AW4911 1/2" • Anti-rust oiled, sand-blasted.
• Total length : 25 mm
▪ 6 points
▪ Use for replacing and removing idler pulley 1025V 1/4"
center screw on TOYOTA ALTIS
▪ For inside 5-star screw
▪ Tamper resistant type
▪ IPR20 for MERCEDES-BENZ Atego and Actros
D1

MAZDA 3 1.4 and 1.6

ℓ ▪ IPR25 for VW
L

KT NO.
D1 ℓ L g
mm mm mm
9AW4911 19 10 33.8 16 10 / 200 order unit :one box Item No.xxxxxxx.B

KT NO. g
Size
102520V IPR 20 5.0
20 / 200
102525V IPR 25 5.0

579
 Bit Socket
• Socket made from chrome vanadium alloy steel
• Bit made from silicon alloy steel (S2) In order to get normal life of bit socket,
• Polished, chrome plated always use within limited torque of bit.

3039 3/8"
▪ Use for cylinder head bolts
▪ M8 : Alfa Romeo, Fiat, Lancia
M9 : VW Passat, Audi, Seat
M10 : Alfa Romeo, Fiat, Lancia
M12 : Fiat, Ford
M13 : Alfa Romeo, Fiat, Lancia
M14 : Fiat
Overall length g
KT NO.
Size mm

303908 M8 90 88.0 8 / 160

303909 M9 90 89.0 8 / 160
303910 M10 90 90.0 8 / 160

4049 1/2"
▪ Use for VW, Audi, Fiat cylinder head bolt

Overall length g
KT NO.
Size mm

404904 M4 100 94.0 6 / 120

404905 M5 100 95.0 6 / 120
404906 M6 100 96.0 6 / 120
404907 M7 100 97.0 6 / 120
404908 M8 100 98.0 6 / 120
404909 M9 100 100.0 6 / 120
404910 M10 100 106.0 6 / 120
404925 M10.5 100 110.0 6 / 120
404912 M12 100 132.0 6 / 120
Engine Series

404913 M13 100 162.0 6 / 120

404914 M14 100 164.0 6 / 120
404916 M16 100 166.0 6 / 120

4116PR 1/2"
▪ Socket rail 180mmL
6
- Rail with 6 PC. 1/2" drive clip PC.

Kg
Contents 0.38 20

4049 M9, M10, M12, M13, M14, M16

8740706

402B 1/2"
▪ Spline head ▪ Suitable for
▪ Temper resistant type Audi : A3/A4/A6/TT
▪ Use for gear box and oil plug VW : Porsche/Gold LT/Passat/Skoda/Ford

Overall Length g
KT NO.
Size mm

402B16 M16 66 150.0 10 / 120

580
Bit Socket
• Socket made from chrome vanadium alloy steel In order to get normal life of bit socket,
• Bit made from silicon alloy steel (S2) always use within limited torque to bit.
• Polished, chrome plated

404108 4066 1/2"

▪ Use for cylinder head bolts
M10 : Ford, VW, Vauxhall/Opel
▪ M12 : VW, Ford, Mercedes-Benz

Overall length g
KT NO.
Size mm

404108 M8.9 100 129.4 6 / 120 404108

406608 M8 140 109.0 6 / 120
406609 M9 140 138.0 6 / 120
406610 M10 140 138.0 6 / 120
406612 M12 140 175.0 6 / 120
406614 M14 140 213.0 6 / 120 4066

Spark Plug Socket

3630 3660 3635 3665 3/8"
3670 3675 3/8"
▪ 6 / 12 points
▪ Size combined- 16.0mm (5/8") -
20.8mm (13/16")
▪ Inside sleeve - rubber / magnet
▪ DIN 3120
Size D L
KT NO. Type g 363016 366016
inch mm mm mm
12 points
363016 5/8 16.0 21 70 100 10 / 200
Rubber

Engine Series
12 points
366016 5/8 16.0 21 70 105 10 / 200
Magnet
363021 366021
12 points
363021 13/16 20.8 27.7 70 150 12 / 120
Rubber
12 points
366021 13/16 20.8 27.7 70 155 12 / 120
Magnet
6 points 363516 366516
363516 5/8 16.0 21 70 100 10 / 200
Rubber
6 points
366516 5/8 16.0 21 70 105 10 / 200
Magnet
6 points
363521 13/16 20.8 27.7 70 145 12 / 120
Rubber 363521 366521
6 points
366521 13/16 20.8 27.7 70 150 12 / 120 Rubber Magnet
Magnet
12 points
367014 - 14.0 18.5 63 65 10 / 200
Metal clip
D

12 points
367016 5/8 16.0 21.0 70 100 10 / 200
Metal clip L L

12 points
367018 - 18.0 23.8 63 97 12 / 120
Metal clip
12 points
367021 13/16 20.8 27.7 70 178 12 / 120
Metal clip
6 points 367514
367514 - 14.0 18.5 63 69 10 / 200
Metal clip
6 points
367516 5/8 16.0 21.0 70 100 10 / 200
Metal clip
6 points 367014
367518 - 18.0 23.8 63 97 12 / 120
Metal clip
6 points
367521 13/16 20.8 27.7 70 180 12 / 120
Metal clip
D

Metal clip
581
 Why spark plugs need torque tightening ?
1. Modern engines cylinder heads are made of aluminium alloy
2. A correct factory-set gaps can provide best performance

Cylinder head
material
Thread diameter (mm)
M8 M10 M12 M14 M18
Cast iron - 10~15 Nm 15~25 Nm 25~35 Nm 35~45 Nm
Aluminium 8~10 Nm 10~12 Nm 15~20 Nm 25~30 Nm 35~40 Nm

•Suggested torque for spark plugs with gasket, always follow factory
owner's manual

3/8" Spark Plug Sockets

3/8" Socket
Size Size L(mm)
Type
(inch) (mm)
63 70 90 250
6 pt Rubber 36B514
12 pt Rubber 36B014 36C014 36D014
9 / 16 14
6 pt Spring 36A514
12 pt Spring 36A014
6 pt Rubber 363516
12 pt Rubber 363016
5/8 16
6 pt Magnet 366516
12 pt Magnet 366016
12 pt Rubber 36B018
23 / 32 18 6 pt Spring 36A518
12 pt Spring 36A018
6 pt Rubber 363521
12 pt Rubber 363021
Engine Series

13 / 16 20.8
6 pt Magnet 366521
12 pt Magnet 366021

1/2" Spark Plug Sockets Torque Wrench & Accessory

1/2" Socket
Size Size L(mm)
Type
(inch) (mm)
70
6 pt Rubber 463514RC KT NO.
Gear Square Torque Range
Incr.
Torque Range
Incr.
9 / 16 14 Teeth Drive in. lb. / ft. lb. Nm
12 pt Rubber 463014RC 34362-1CG 24 3/8" 30~200 in. lb. 1 in. lb. 4.0~22.0 Nm 0.12 Nm
34362-2CG 32 3/8" 10~80 ft. lb. 0.5 ft. lb. 16.9~105.1 Nm 0.7 Nm
6 pt Rubber 463516R
Gear Square Torque Range
12 pt Rubber 463016R KT NO.
Teeth Drive Nm
Incr.
5/8 16
6 pt Magnet 466516 34362-2DG
34362-3DG
32
32
3/8"
3/8"
20~100 Nm
10~60 Nm
0.5 Nm
0.5 Nm
12 pt Magnet 466016
23 / 32 18 6 pt Magnet KT NO.
Square Torque Range Torque Range Total Length
Drive Nm ft. lb. kgf.m
6 pt Rubber 463521R 34307-1A 3/8" 27~135 Nm 19.9~99.6 ft.lb. 2.75~13.76 kgf.m

12 pt Rubber 463021R
13 / 16 20.8
6 pt Magnet 466521 KT NO. Spec.
1/2" drive (M) 3/8" drive (F)
12 pt Magnet 466021 3814 3/8"Fx1/2"M

582
Spark Plug Socket • Chrome vanadium alloy steel, polished, chrome plated
• 4 ball retaining grooves

36B5 3/8"
36B0 36C0 36D0 3/8"
▪ Inside sleeve - rubber
▪ DIN 3120
▪ 36C014 & 36D014 are suitable for
BMW, Mini, RENAULT Clio / Twingo /
Kangoo type, PEUGEOT 206 1.4 16V,
CITROEN C5 HPI.
36B514
Rubber rubber
D

rubber 36B018 36C014

Size D L g
KT NO. Type
mm mm mm

36B514 6 points 14.0 18.5 63 80.3 12 / 192 36D014

36B014
36B014 12 points 14.0 18.5 63 80.3 12 / 192
36B018 12 points 18.0 24.7 65 106.5 8 / 128
36C014 12 points 14.0 18.5 90 112.8 12 / 144
36D014 12points 14.0 18.5 250 291.4 6 / 54

4630 4660 4635 4665 1/2"

▪ 6 / 12 points
▪ Size combined

Engine Series
- 16.0mm (5/8")
- 20.8mm (13/16")
▪ Inside sleeve
- rubber 463014RC - Thin walled design 463016R - Thin walled design 466016 - Thin walled design
- magnet
▪ DIN 3120
▪ 14mm use for Toyota Yaris, Vios
463514RC - Thin walled design 463516R - Thin walled design 466516 - Thin walled design
Rubber Magnet
D
D

463021R 463521R 466021 466521

L L

KT NO. Type Size D L g

inch mm mm mm
463014RC 12 points Rubber - 14.0 19.05 70 70.0 12 / 240
463016R 12 points Rubber 5/8 16.0 20.75 70 110.0 10 / 200
466016 12 points Magnet 5/8 16.0 20.75 70 115.0 10 / 200
463514RC 6 points Rubber - 14.0 19.05 70 70.0 12 / 240
463516R 6 points Rubber 5/8 16.0 20.75 70 110.0 10 / 200
466516 6 points Magnet 5/8 16.0 20.75 70 115.0 10 / 200
463021R 12 points Rubber 13/16 20.8 27.7 70 160.0 12 / 120
466021 12 points Magnet 13/16 20.8 27.7 70 165.0 12 / 120
463521R 6 points Rubber 13/16 20.8 27.7 70 155.0 12 / 120
466521 6 points Magnet 13/16 20.8 27.7 70 160.0 12 / 120

583
 Glow Plug Socket & Set
3785M 3/8"
▪ 4 ball retaining grooves
▪ The socket has a sprung-loaded clip with ball bearing end
D
to stop the glow plug from falling out
▪ Suitable for the removal of glow plugs in most diesel engines

KT NO. D1 D2 L g
mm mm mm mm
378508M 8 13.5 17.8 120 120.0 10 / 100
378509M 9 13.5 17.8 120 127.0 10 / 100
378510M 10 13.5 17.8 120 128.0 10 / 100
378512M 12 17.8 17.8 120 136.0 10 / 100 D2
D1
378514M 14 17.8 17.8 120 142.0 10 / 100
L
378516M 16 19.8 17.8 120 157.0 10 / 100

3716MR 3/8"

6
PC. D

Kg
Contents 1.23 1 / 10

3785M 8, 9, 10, 12, 14, 16

Engine Series

Thin Wall Deep Socket • Chrome vanadium alloy steel, polished, chrome plated
• 4 ball retaining grooves

3215M 3/8"
▪ 6 points
▪ Metric size
D
▪ Thin walled design on square driving side
▪ Specifically for heat plug, glow plug
D2
D1

l
L

ℓ
Thin walled design (D1)

KT NO. D1 D2 L g
mm mm mm mm mm
321510M 10 13.0 17.8 12.0 65 65.0 20 / 240
321512M 12 15.0 17.8 15.0 65 57.0 20 / 240

584
T-type Spark Plug Socket
1566
▪ Chrome vanadium alloy steel
▪ With magnet
Magnet
ℓ L
KT NO. mm mm mm
g

15661612 16 200 300 400.0 10 / 40

15661615 16 200 385 420.0 10 / 40
15661618 16 200 460 460.0 10 / 40
15661818 18 200 460 450.0 10 / 40
15662112 21 200 300 420.0 10 / 40
15662115 21 200 385 460.0 10 / 40
15662118 21 200 460 510.0 10 / 40 SIZE
L

0° Offset Ring Wrench

19B0
▪ Ideal for crowded or tight spaces
▪ Ultra-compact ring head
▪ Chrome vanadium steel
▪ Metric size - DIN 3113

KT NO. D1 D2 L g
mm mm mm mm D1 D2
19B00810 8 x 10 12.5 15 235 72.0 12 / 240 L
19B01011 10 x 11 14.3 17 291 95.0 12 / 192
19B01012 10 x 12 14.3 17 291 95.0 12 / 192

Engine Series
19B01113 11 x 13 17.8 20.3 328 157.0 12 / 120
19B01214 12 x 14 17.8 20.3 328 157.0 12 / 120
19B01315 13 x 15 20.2 23.3 368 217.0 12 / 96
19B01417 14 x 17 20.2 23.3 368 217.0 12 / 96
19B01618 16 x 18 23.7 26.6 407 284.0 12 / 72
19B01719 17 x 19 23.7 26.6 407 284.0 12 / 72
19B01921 19 x 21 27.5 29.7 415 376.0 8 / 64
19B02224 22 x 24 31.3 34.0 430 482.0 6 / 48

585
 Bearing Race and Seal Driver Set
9BA11
▪ Quick and easy to insert bearing race
▪ Collars fit most standard wheel bearing sizes 10
▪ Helps reduce damage to both race and axle PC.
housing
▪ 9 collar sizes:
(1)1.555"/39.5mm (2)1.752"/44.5mm
(3)1.968"/50mm (4)2.322"/59mm
(5)2.480"/63mm (6)2.559"/65mm
(7)2.834"/72mm (8)2.992"/76mm
(9)3.189"/81mm
Kg 1 / 10
1.8

Two Sets Pressure Screw Bearing Separator Puller Set

9BA21
▪ 2 Sets bearing separator & bolts
12
▪ Contents: PC.
(1) 9BA21P02
Capacity 30mm ~ 50mm
Bolt 3/8" x 24UNF x L125mm
(2) 9BA21P01
Capacity 50mm ~ 75mm
Bolt 1/2" x 20UNF x L 135mm
(3) 4 PC. Main rod
9BA21P04
Hex bar 14mm 3/8" x L 102mm x 2 pcs
9BA21P06
Hex bar 17mm 1/2" x L 127mm x 2 pcs
(4) 4 PC. Extension rod
9BA21P05
Undercar Series

Hex bar 14mm 3/8" x L 102mm x 2 pcs

9BA21P07
Hex bar 17mm 1/2" x L 127mm x 2 pcs
(5) 1 PC. Beam
(6) 1 PC. Central bolt
9BA21P011
Hex 18mm x 9/16" x L175mm
Kg 1/2
5.25

Pressure Screw Bearing Separator Puller Set

9BA22
▪ The set includes bearing separator & bolts
▪ Contents: 8
(1) 9BA22P01 PC.
Capacity 75mm ~ 105mm
Bolt 5/8" x 18UNF x L 165mm
(2) 2 PC. Main rod
9BA22P02
Hex bar 19mm x M12 & 1/2" x L 255mm
(3) 2 PC. Extension rod
9BA22P04
Hex bar 19mm x M12 x L 255mm
(4) 1 PC. Beam
(5) 1 PC. Central bolt
9BA22P011
Hex 21mm x M18 x L292 mm
(6) 1 PC. Nut
Kg
8.95 1/2
586
Hydraulic Puller Set
9BA01 1/2"
▪▪Includes forged steel bearing separator and gear
puller
▪▪Operate up to 10 ton hydraulic pulling power
▪▪Special separator design of the strong back puller
allows the puller to be used even in the tightest
spaces
▪▪Suitable for industry, automotive and a gricultural
machine
1 Set Separator Capacity 75mm ~ 105mm
1 PC. Beam
1 PC. 10T Hydraulic Ram
1 PC. Tripe Head
1 PC. Twin Head
1PC. Ram Part
1 PC. Centre Adapter
1 PC. 1"x 2" Extension Rod
1 PC. 1"x 4" Extension Rod
2 PC. Main Rod Hex bar 19mm x M12 & 1/2" x L255mm
2 PC. Extension RodHex bar 19mm x M12 x L255mm
3 PC. 4" Leg
3 PC. 6" Leg
3 PC. 8" Leg
Kg
17 1/1

Undercar Series
Hydraulic Mechanical Pullers
9BA
▪▪Quick and safe removal particularly large and
tight gears, bearings, etc…
▪▪Two and three jaws type, use for different space

A
A

B 9BA02 B
9BA03

Capacity Jaws Spread Reach kg

KT NO. (Tons) (leg) A(mm) B(mm)
9BA02 15T 2 320 500 11.3 1/1
9BA03 15T 3 320 500 16.5 1/1

587
 Universal Bearing Puller Set
9BA31 9BA32
▪ Easy and fast removing ball bearing by using the ▪ Easy and fast removing ball bearing by using the
puller puller
▪ Select proper tips by ball diameter ▪ Select proper tips by ball diameter
CONTENTS : CONTENTS :
• 1 PC. Puller yoke and center screw • 1 PC. Puller yoke and center screw
• 1 PC. Top Nut • 1 PC. Top Nut
• 2 PC. Extension rod x L 105mm • 2 PC. Extension rod x L 100mm
Ball ended threaded adapter Ball ended threaded adapter
• 2 PC. 5.5mm / 2 PC. 6.0mm / 2 PC. 8.0mm • 2 PC. 11.0mm / 2 PC. 12.5mm / 2 PC. 15.0mm
10 Kg
10
Kg
1.33 1 / 12 2.0 1 / 12
PC. PC.

9BA33
▪ Easy and fast removing ball bearing by using the
puller 16
▪ Select proper tips by ball diameter PC.
CONTENTS :
• 1 PC. Puller yoke and center screw
• 1 PC. Top Nut
• 2 PC. Extension rod x L 170mm
Ball ended threaded adapter :
• 2 PC. 15.0mm / 2 PC. 17.4mm
• 2 PC. 20.0mm / 2 PC. 25.2mm
Undercar Series

• 2 PC. 30.0mm / 2 PC. 36.4mm

Kg 1/3
8.0 90°

Universal Bearing Ring Puller

9BA41
▪ Three jaws with the thin edge provide an equal 22mm

grip tension to avoid any slide or tilt

▪ Suitable for all kind of bearing and sleeves
diameter up to 125mm
▪ Applicable: For universal vihicles

Ø Capacity Kg
KT NO.
mm
• Adjustable slide knob for
9BA41 10~125mm 3.6 1/4 quick control locking

588
 Suitable Car
Hose Clamp KT Item Brand

9BB11

CV Boot Clamp

VW, Audi, BMW, Ford, GM,

Opel, Nissan, Mercedes-
Benz, Mazda, Honda,
Chrysler, Citroen, Seat
9BB12

Ear Clamp

9BB13

Univresal

Undercar Series
CV Boot Clamp

9BB31

589
 Ear Hose Clamp Pliers
9BB11
▪ Use to remove and install ear clamp
▪ Special hook jaw easy to hold clamp in position
▪ Suitable for CV joint boot, vacuum lines, and
cooling system

L A max g
KT NO.
inch mm mm
L

9BB11 10 260 22.5 364.4 12 / 48

CV Boot Clamp Pliers

9BB12
▪ Use to remove and install stainless CV boot
clamp
▪ Can be used with 1/2" flexible handle bar or
torque wrench
▪ Suitable for Audi, Opel, Citroen, SEAT, BMW,
Mercedes-Benz, Honda, Nissan, Mazda, Ford,
GM, Chrysler L
L A max g
KT NO.
inch mm mm

9BB12 9-1/2 235 12 512.4 6 / 36

CV Boot Clamp Pliers with Socket

9BB13
▪ Use to remove and install stainless CV boot
Undercar Series

clamp
▪ Can be used with 3/8" flexible handle bar or
torque wrench
▪ Suitable for Audi, Opel, Citroen, SEAT, BMW,
Mercedes-Benz, Honda, Nissan, Mazda, Ford,
GM, Chrysler
L A max g
KT NO.
inch mm mm
L

9BB13 11 278 45 887.8 6 / 24

CV Boot Clamp Installer

9BB31
▪ Use to cut and install clamp with built-in cutting arm
▪ Includes locking device and ratchet function
▪ Suitable for general vehicle types
Lock Cut

L g
KT NO.
inch mm

9BB31 6-1/2 124 346.8 12 / 36

590
Exhaust Pipe Hanger
9BP11
▪ Use to remove rubber holders from exhaust brackets
▪ Suitable for general vehicle types

L A max g
KT NO.
inch mm mm

9BP11 10 250 60 338.6 12 / 36

Handbrake Cable Pliers

9BC11
▪ For hand brake cable removal and replacing
▪ Suitable for Audi, Bmw, Citroen, Nissan, Peugeot, Seat, Renault, Rover, etc
L A max B g
KT NO.
inch mm mm mm

9BC11 9 230 60 5 198.0 12 / 48

Drum Brake Spring Pliers

9BC121 9BC122
▪ Designed to remove and replace brake retaining
spring on drum brakes

9BC122

Undercar Series
9BC121

L
KT NO. g
inch mm

9BC121 8-1/2 215 230.0 12 / 72

9BC122 12-1/2 320 426.0 12 / 36

HGV Drum Brake Spring Pliers

9BC124
▪ Designed to remove and replace brake retaining spring on drum brakes
▪ Extra strong version for HGV air or hydraulic drum brakes

L
KT NO. Kg
inch mm

9BC124 20-5/8 525 1.25 3/6

591
 Disc Brake Piston Separator
9BC21
▪ Heavy duty drop forged construction Ma
x
▪ Fits in brake caliper to push back pistons for new Ca
pacity
brake pads installation

Max capacity Kg
KT NO.
inch mm

9BC21 2-7/8 75 1.13 1 / 20

Universal Disc Brake Wind-Back Tool Set

9BC22
▪ Magnetic socket adapter
▪ Including 9 adapters for brake assemblage
11
PC.
▪ For rotating pistons back into caliper to provide clearance for new pads
▪ Prevents damage to the piston and boot
▪ Suitable for V.W.-audi, Ford, Nissan, Alfa romeo, Rover, Saab, Subaru,
Toyota, Jaguar, and most of the general motors
Kg 1/6
3.00

Universal Disc Brake Wind-Back Tool Set

Undercar Series

9BC23
▪ For rotating pistons back into caliper to provide
clearance for new pads 31
PC.
▪ Prevents damage to the piston and boot
▪ Suitable for Bmw, Ford, Vw, Audi, Porsche, Saab,
Opel, Volvo, Jaguar, Citroen, Peugeot, Renault,
Lauxhall, Lancia, Alfa romeo, Fiat, Nissan, Honda,
Subaru, Toyota, Mitsubishi
▪ Contents:
21 PC. Adapters for brake assemblage
3 PC. Backing pads
2 PC. Rotating caliper with 3/8"DR (right/left side
threaded)
2 PC. Hex key: 7, 8mm
2 PC. Pin punch : Ø 5.5, 6mm
1 PC. 3/8"DR x 12mm hex key socket
Kg
4.76 1/4

592
Brake Caliper Piston Tool
9BC24A
▪▪For rotating pistons back into caliper to provide
clearance for new pads 4
▪▪Fast and easy to use, prevents damage to the PC.
piston and boot
▪▪Fits most European and Japanest vehicles

22mm

33mm

Capacity g
KT NO. A(mm) B(mm)

9BC24A 22 33 700 5 / 30

Pneumatic Disc Brake Wind-back Tool Set

9BC25 Brake Bleeder Valve Collection Bottle
▪▪Air operated ram applies pressure to caliper 9BC31
piston, while the handle is rotated by hand
▪▪Easy to use- works on standard workshop air ▪▪Easy to operate and inspect the brake bleeder
supply valve by one person
▪▪Reversible- works on both RH and LH applications ▪▪Capacity : 800 ml
▪▪Can be used on wind back and push back ▪▪Use for separating the air in the brake oil and
piston replace the brake fluid
g
▪▪Supplied with adaptor, which covers a wide 280 1/4

Undercar Series
range of popular vehicles
▪▪Full range of additional specialist adaptors
available
▪▪Suitable for Mercedes-Benz, Bmw, Audi, Vw,
Opel, Volvo, Jaguar, Citroen, Fiat, Peugeot, Alfa
romeo, Saab, Lancia, Toyota, Honda, Nissan,
Mitsubishi, Isuzu, Mazda, Subaru, Gm, Ford, Rover
Kg
3.20 1/5
18
PC.
(Fig.1) Always keep the tool
clean after using

(Fig.2)

(Fig.3)

593
 Ball Joint Extractor
9BE11 9BE21
▪ Drop forged steel body ▪ Special design 2 stage operation, suits most cars
and light trucks ball joints in steering & suspension
▪ Suitable for most European and Japancese
vehicles

A B(mm) C D E Kg A B(mm) C D E Kg
KT NO. KT NO.
mm Max Min mm mm mm mm Max Min mm mm mm

9BE11 160 50 12 19 19 25 1.08 1 / 12 9BE21 160 50 12 20 22 32 1.27 1 / 12

Undercar Series

594
Ball Joint Extractor
9BE4
▪ For quick and easy separation of ball joint pivots of pitman arms, steering tie rods, ball joints, etc
▪ Suitable for general trucks and vehicles
▪ For better safety operation & avoid damage

A B C D g
KT NO.
mm mm mm mm

9BE41 36 40 18 17 363.9 1 / 36 D
9BE42 46 48 23 17 558.3 1 / 36
9BE43 62 62 29 19 925.0 1 / 12
9BE44 64 76 40 24 1658.3 1 / 12
9BE45 77 100 46 24 1858.3 1 / 12

A B

Ball design
C

Impact Ball Joint Separator

9HBE4
▪ For quick separation of ball joint for heavy goods vehicle
▪ Extra deep design for tight space
▪ Use with impact tools
26mm

3/4''
DR.

Undercar Series
B B

A A
A B A B
KT NO. Kg KT NO. Kg
mm mm mm mm
9HBE4-30 30 95 2.32 1/6 9HBE4-58 58 120 4.20 1/6
9HBE4-39 39 95 2.32 1/6 9HBE4-62 62 120 4.20 1/6
9HBE4-47 47 95 2.32 1/6 9HBE4-67 67 120 4.20 1/6
Heavy Goods Vehicle Ball Joint Separator
Size Application
(mm)
BMW (E39), Benz(W203/W210/W211/W220/W221),
30
Mitsubishi Delica, Canter, Toyota Dyna etc…
"4 tons and European truck:
39
Scania, Benz, MAN 414 drag link and Hino etc..."
"8.8 tons~10.5 tons truck:
47
Hino, Isuzu, Nissan, UD,Fuso etc..."
58 Scania etc…
"15 tons~35 tons:
62
Hino, Isuzu, Nissan, Fuso truck and bus etc…"
67 MAN(FE410A) etc…

595
 Hydraulic HGV Ball Joint Separator & Set
9HBE81
▪ Use for separating ball joint for heavy goods
vehicles 3
▪ Design for operating manually or by 12 tons PC.
hydraulic ram
▪ Strengthen fork and lever for greater force to be
applied
Kg
7.0 1/2
capacity

Jaw opening 70mm

Jaw width 36mm

9HBE083
▪ Use for separating ball joint for heavy
goods vehicles 5
▪ Design for operating manually or by 12 tons PC.
Undercar Series

hydraulic ram
▪ Interchangeable jaws width : 30 / 34 / 40mm
Kg
8.5 1/2

Jaw Opening size : 30, 34, 40 mm

596
Inner Tie Rod Tool
9BE52
▪ Removes and replaces the axial joint
▪ Hex part on the end of tool: works with 27 mm
wrench or 1/2" DR. ratchet

L Ø Capacity Kg
KT NO.
inch mm mm
L
9BE52 15-3/4 400 35~45 2.14 1 / 10

Multi-Purpose Inner Tie Rod Tool

9BE62 9BE63
▪ Use for replace inner tie rod ends without removing the rack and pinion
▪ Internal serrated design to make grip tight
▪ Use with ratchets and extensions by 1/2" sq drive
▪ Suitable for most vehicles & trucks
Ø

L
L Ø Capacity g
KT NO.
inch mm mm

Undercar Series
9BE62 3-1/4 81.50 33~42 370.2 20
9BE63 3-7/16 87.56 42~50 403.6 20

Universal Adjustable Wheel Bearing Lock Nut Wrench

9HBN01
▪ For disassemble and assemble vario nut and cap
▪ Extra slim design suitable to reach narrow space for 13
special nut PC.
▪ Use with 3/4" square drive tools and suggest to lock by
torque wrench
3/4''
▪ Application for 6PT, 8PT and round nut DR.
▪ Adjustable open jaw 50~150mm

Contents:
3 pairs round adapter for round nut: 6mm, 8mm ,10mm
3 pairs square adapter for round nut: 1/4", 5/16", 3/8"
Kg
3.68 1/5

597
 Drop Forged Coil Spring Compressor Set
9BF11 9BF21
▪ Drop forged SCM435 jaws & leaded screws
▪ Both 21mm 6-point sockets and 1/2" wrench are available 6
▪ Suitable for limited space under wheel arch PC.

L Kg
KT NO.
mm mm

9BF11 85 / 370 1/2" 21 3.51 1/6

9BF11 9BF21
9BF21 85 / 270 1/2" 21 3.36 1/6

Coil Spring Compressor Set

9BF31
▪ Developed for "Macpherson" suspensions, using
a range of 3 sets interchangeable monobloc 8
forks PC.
▪ Spring specification / use:
A:Ø80~115mm
B:Ø110~150mm
C:Ø140~195mm
Undercar Series

▪ Suitable for : BMW, Ford, VW, Audi, Porsche,

Saab, Opel, Volvo, Nissan, Honda, Mitsubishi,
Subaru, Toyota

L Capacity Kg
KT NO.
mm mm

9BF31 460 40~300 15.00 1/1

598
Steering Wheel Puller Set
9BG11
▪ Easy to remove and install steering wheel for cars and trucks 18
▪ 2 sets 17mm hex head puller with pointed and flat cups PC.
▪ 4 sets side bolts
▪ Small plate Dia.:
1"~3-11/16" 25~95mm
▪ Large plate Dia.:
1-1/8"~5" 28~125mm
▪ Side bolts size:
3 PC. 5/16" UNC x 3-1/2" lon g puller bolts
3 PC. 5/16" UNF x 3" long puller bolts
3 PC. 3/8" UNC x 3" long puller bolts
3 PC. 3/8" UNF x 3" long puller bolts
Kg
4.10 1/6

Multi-Steering Knuckle Spreader Tool Set

9BJ11
▪ Used to spread the steering knuckle to enable
the removal and fitting of shock absorbers 15
without the risk of damaging the aluminum or PC.
cast iron knuckle
▪ The tool is adjustable and suitable for steering
knuckles with either a centralized slot or a non
centralized slot
▪ Wide range of vehicle applications

Undercar Series
▪ Designed for twin ball joints as fitted to Audi
and VW control arms
▪ Suitable for strut clamping bores on Audi, VW,
BMW, Ford, Peugeot, Citroen, Renault, Seat,
Skoda
Kg
1.05 1 / 12

Wheel Balancing Weight Tool

9BK11
▪ Ideal for fitting and removing wheel balance
weights

L A B g
KT NO.
inch mm mm mm

9BK11 10 250 22 86 420.0 10 / 50

599
 Wheel Stud Alignment Guide Tool Set
9BK2008
▪ Easy to remove and install wheels with lug bolts
▪ 4 pairs of metric threaded pin allow to hang wheel safety 8
PC.
▪ Suitable for BMW, Mercedes, Renault, VW, Audi...
L

L g
KT NO. mm
9BK2008 150 990

CONTENTS :
• 2PC. M12 x 1.25
• 2PC. M12 x 1.5
• 2PC. M14 x 1.25
• 2PC. M14 x 1.5

Tire Valve Installer

9BK31 9BK32
▪ Use for replacement and fitting tire valves
▪ Composite body prevents damage onto alloy 9BK31
wheel g
118.0 12 / 144
▪ 180 degree pivoting head
▪ 310mm plastic handle

9BK32
Undercar Series

g
353.0 6 / 48

• For removal & installing

valve cores

Tire Lever
9BK41
▪ Straight pattern with profiled shank

L A B g
KT NO.
inch mm mm mm

9BK41-20 8 200 21.6 11 104.4 10 / 50

9BK41-28 11 280 22.7 13.5 239.4 10 / 50
9BK41-38 15 380 24.5 13.5 358.0 10 / 50
9BK41-53 21 530 28 12 928.0 10 / 20

600
Tire Lever
9BK41-73
▪▪To install and remove the tire from wheel rim
▪▪Precision forged with greater leverage design
▪▪Special design for 17" to 22.5" tire
L
L A B g A
KT NO.
9BK41-73

inch mm (mm) (mm)

9BK41-73 28-3/4 730 22 64.4 1618 1 / 10
B

TPMS Torque Assist Tool Set

9BK51
▪▪Use to install/change TPMS sensor and tyre valve
▪▪Rotary slide bar design avoids tightening with 11
overloaded torque PC.
Correct instruction should take the manual as reference
▪▪Torque screwdriver with ±5% tolerance
▪▪Quality meets DIN ISO 6789 & ASME B107.300-2010
• Contents:
2033
1/4"DR x T10, T15, T20 torx bit socket
2235M
1/4"DR x 11, 12, 13mm deep socket
2221-02
1/4"DR x 2" extension bar
2752-45G
1/4"DR. T handle swivel head reversible ratchet
34101-040M

Undercar Series
Valve core torque tool (0.45N.m)
341214M
1/4"DR. Preset torque T-DRIVER (1.4 N.m)
34211-3DG
1/4"DR. Torque Screwdriver (4~9 N.m)
Kg
1.53 1 / 10

Tire Valve Core Remover / Installer Torque Screwdriver

34101-040M
▪▪Preset torque setting in order to remove &
install valve cores correctly
▪▪Prevent overloaded torque to cause damage on
valves sensor cores
▪▪Preset torque is 0.45 N.m (4.0 Inch/lbs) 74.5 79

▪▪Ergonomics design with TPR handle

g Ø4.2
82.2 24 / 96

601
 Digital Tire Gauge
9BM120
▪▪Tyre pressure gauge specification:
Unit range:
0-100 psi / 0~7.0 bar / 0~7.0 Kgf-cm² / 0~700 kpa
Display resolution:
0.1 psi / 0.01 bar / 0.01 Kgf-cm² / 0.01 kpa
▪▪Tread depth gauge specification :
Unit range: 0-22mm/.8"(Gauge: mm/inch)
Display resolution: 0.01mm/.001"
Accuracy: ±1%

A B L g
KT NO.
mm mm mm

9BM120 53 38 101 53.0 12 / 96

Tire Air Bead Seater

9HBL
▪▪Capacity: 5 Gallon
▪▪Used for seating tires for cars, trucks, ATVs, tractors
Lever action ball valve
▪▪Air gauge for easy and accurate air volume readings
discharges the air to blast
▪▪Can be used for tire sizes up to 24.5"
the air cavity of the tire
kg 11.0 1 Opening
and seat the beads quickly
Barrel Flange
45°
Safety valve
Lip of Rim
Valve Stem inflation Hose

Continual air flow to 5 gallon air tank

Undercar Series

Valve Stem
the Valve Stem Bead

Internal air pushing Bead Blaster air

against the inside of seating the bead
the tire of the tire
Turntable Jaws
Bead Blaster Holes

KT NO. Type Capacity Max. pressure

9HBL11-05 America
5 gallon(20 L) 145PSI(10bar)
9HBL12-05 Europe

602
3-In-1 Inflator
9BM
▪ Diaphragm pressure gauge
▪ Accuracy: ANSI B40.100 ±3% ~ ±2% ~ ±3%
▪ Special rubber housing protects manometer
against light impacts 9BM2110
▪ 3 functions(check, release, inflator) all together on 9BM2111
9BM2210
the press handle
9BM2211
▪ Variable trigger, two control position inflate/
deflate leve
▪ Flexible 400MM high pressure rubber hose with
clip-on air tire chuck
▪ Pressure range:
0-160 PSI (9BM21) / 0-220 PSI (9BM22)
▪ Built in hang-up hook allows easy storage 9BM2210A
9BM2211A

L1
Inflator
Release L2
Check

146
20 185

9BM2-01 9BM2-02
Pressure range Air Inlet L (mm) Air hose g
KT NO. (Psi) (BSPT/NPT) L1 L2 (ID)
9BM2110 160 1/4" BSPT Ø13 x 400 180 3/8" 500 1 / 12
9BM2111 160 1/4" NPT Ø13 x 400 180 3/8" 500 1 / 12

Undercar Series
9BM2210 220 1/4" BSPT Ø13 x 400 180 3/8" 520 1 / 12
9BM2211 220 1/4" NPT Ø13 x 400 180 3/8" 520 1 / 12
9BM2210A 220 1/4" BSPT Ø13 x 400 180 3/8" 600 1 / 12
9BM2211A 220 1/4" NPT Ø13 x 400 180 3/8" 600 1 / 12
9BM2-01 (included in all 9BM series) 20 - 25 -
9BM2-02 (included in 9BM2210A & 11A only) 185 - 105 -

603
 Wheel Lock Screw Socket Set
9BW0120 VW 9BW0220 BMW
▪ Used to permit servicing of customer vehicles, ▪ Used to permit servicing of customer vehicles,
even lose the key even lose the key
▪ Applicable for installing and removing locks of ▪ Applicable for installing and removing locks of
most VW models most BMW models
▪ Chrome molybdenum, alloy steel chrome plated ▪ Chrome molybdenum, alloy steel chrome plated
▪ Work with 17mm hex tool ▪ Work with 17mm hex tool
▪ Contents: ▪ Contents:
#521,#522,#523,#524,#525,#526,#527,#528,#529,#5 #041,#042,#043,#044,#045,#046,#047,#048,#049,#0
30,#531,#532,#533,#534,#535,#536,#537,#538,#539, 50,#051,#052,#053,#054,#055,#056,#057,#058,#059,
#540 #060
Kg
2.9 1/5 20 Kg
1.94 1/5 20
PC. PC.

9BW0123 VW 9BW0221 BMW

▪ Used to permit servicing of customer vehicles, ▪ Used to permit servicing of customer vehicles,
even lose the key even lose the key
Undercar Series

▪ Applicable for installing and removing locks of ▪ Applicable for installing and removing locks of
most VW models most BMW models
▪ Chrome molybdenum, alloy steel chrome plated ▪ Chrome molybdenum, alloy steel chrome plated
▪ Contents: ▪ Contents:
#51/6PT, #52/7PT, #53/8PT, #54/9PT, #55/10PT, #30/13PT, #31/15PT, #32/16PT, #33/17PT, #34/18PT,
#56/11PT, #57/18PT, #58/13PT, #59/14PT, #60/15PT, #35/19PT, #36/20PT, #37/21PT, #38/22PT, #40/23PT,
#61/16P, #62/17PTT, #ABC0/10PT, ABC1/11PT, #13/16PT, #12/14PT, #11/15PT, #16/10PT, #15/11PT,
ABC2/13PT, ABC3/14PT, ABC4/15PT, ABC5/16PT, #14/12PT, #19/8PT, #18/13PT, #17/7PT, #20/9PT,
#ABC6/17PT, ABC7/19PTABC8/20PT, ABC9/21PT, #494517M (1/2"DR. x 17mm)
#494517M (1/2"DR. x 17mm) Kg
1.48 1 / 10
Kg
1.57 1 / 10 21
23 PC.
PC.

604
Locking Nuts & Bolt
WSB01
▪ Long Bolt

KT NO. HEX Thread ℓ L

M mm mm

- M12 x 1.5 28 47
WSB012802-5
13/16 - - 29

- M14 x 1.5 30 49 L
WSB013006-5 l L
13/16 - - 29

M HEX

WSN14
▪ Lock Nut

Thread L
KT NO. HEX Ø M mm

- 23 M12 x 1.25 36
WSN143601-5

19 x 13/16 - - 28

- 23 M12 x 1.5 36
WSN143602-5
HEX HEX
19 x 13/16 - - 28
M
L
Ø L

WSN04

Undercar Series
▪ Long Lock Nut

Thread L
KT NO. HEX Ø M mm

- 23 M12 x 1.25 36
WSN043601-5
19 x 13/16 - - 28

- 23 M12 x 1.5 36
WSN043602-5 HEX HEX

19 x 13/16 - - 28
M

L Ø L

WSB02
▪ Cone Seat Bolt Lock

KT NO. HEX Thread ℓ L

M mm mm

- M12 x 1.25 27.5 52.5

WSB022701-5
17 x 3/4 - - 38
L
L HEX
l

605
 Impact Socket For Hybrid Wheel Bolts Mercedes-Benz
• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

9BW4501 1/2"
▪ Durable outer sleeve protects polished wheels
and lug nut
▪ Suitable for Hybrid wheel bolts on e.g. MERCEDES-
BENZ C-Class type 204, 204X E-Class type 211,
212, 207 SLK type 172 M-Class type 164, 166 S-Class
type 221, 222 CL-Class type 216

KT NO. Size D1 D2 ℓ L g
mm mm mm mm mm

9BW4501 17 26.4 30 26 85.5 229 5 / 60

Impact socket for special profile Wheel Bolts

9BW4502 1/2"
▪ Durable outer sleeve protects polished wheels
and lug nut
▪ Suitable for Wheel nuts with special profile 21 mm
on HYUNDAI i30, Tucson and KIA

KT NO. Size D1 D2 ℓ L g
mm mm mm mm mm

9BW4502 21 28.5 30 26 85.5 252 5 / 60

Wheel Nut Impact Socket Set

Undercar Series

10 Point Socket 20MM

9BW4801 1/2" 4405MX 1/2"
▪ 1/2"drive ▪ Thin wall impact socket set with plastic
sleeve
3
▪ 10 points PC.
▪ Use for replacing and removing retaining ▪ 6 points
screw on rear trailing arm on HONDA CR-V ▪ Durable outer sleeve protects polished
wheels and lug nuts

Blow case size (mm) :

149 x 132 x 45

KT NO.
D1 ℓ L g
mm mm mm mm

9BW4801 20 25 15 38 88.0 10 / 160

Kg
Contents 0.83 1 / 16

494517MX 17 mm

494519MX 19 mm

494521MX 21 mm

606
Wheel Nut Impact Socket Set
4406MX 1/2"
▪▪3 PC. Plastic sleeve thin wall impact socket
▪▪3 PC. Torque extension bar 6
PC.

Kg
Contents 2.13 1 / 10

494517MX 17 mm

494519MX 19 mm

494521MX 21 mm
4269-08-90 90 Nm
4269-08-B0 110 Nm
4269-08-D5 135 Nm Metal case size (mm): 296 x 130 x 41

Extra Thin Wall Impact Socket

• Material - chrome molybdenum alloy steel
• For aluminum alloy wheel
• Finishing - phosphate sunk
• Super thin wall version has less strength than standard deep version

4415M 1/2"
▪▪Super thin wall version
▪▪6 points Thin walled design (D1)
▪▪Metric size
▪▪DIN 3121

D2
D1

Undercar Series
D1 D2 L g
KT NO.
mm mm mm mm mm
l
441517M 17 23.8 25 17 80 171.0 6 / 96
L
441519M 19 25.8 30 20 80 209.0 6 / 96
441521M 21 27.8 30 22 80 219.0 6 / 96
441522M 22 29.5 30 24 80 237.0 6 / 96

Double - Ended Impact Socket

• Material - chrome molybdenum alloy steel
• Finishing - phosphate sunk

4915M 4915S 1/2"

D1 D2 L g
KT NO. 28 26
mm / inch mm mm mm
49151719M 17 x 19 26 28 77 210 6 / 96
D2

D1

49151921M 19 x 21 26 28 77 200 5 / 60
49152122M 21 x 22 30 32 77 310 5 / 60
L
49152123M 21 x 23 30 32 77 310 6 / 96
49152426S 3/4" x 13 / 16" 26 28 77 200 6 / 96

607
 Lubrication-Grease Gun
9BU11 9BU14 9BU15
▪ Ideal for machine, automobile, farm and
garden equipments, other vehicles etc.

9BU14
9BU11 9BU15

KT NO. L Ø Working pressure Burst pressure Capacity Kg

inch mm Screw thread psi bar c.c. oz

9BU111 10-5/8 267 1/8" x 28 PT 2900 200 4000 275 120 3 0.61 1 / 30
9BU112 10-5/8 267 10 x 1.0 Metric 2900 200 4000 275 120 3 0.61 1 / 30
9BU141 10-5/8 267 1/8" x 28 PT 4500 310 7000 490 400 14 1.29 1 / 12
9BU142 10-5/8 267 10 x 1.0 Metric 4500 310 7000 490 400 14 1.29 1 / 12
9BU151 10-5/8 267 1/8" x 28 PT 4500 310 7000 490 500 16 1.51 1 / 12
9BU152 10-5/8 267 10 x 1.0 Metric 4500 310 7000 490 500 16 1.51 1 / 12
9BU111 / 9BU141 / 9BU151 For general market except North America, Germany, South Africa, Egypt
9BU112 / 9BU142 / 9BU152 For Germany, South Africa, Egypt, etc.

Lubrication-Grease Gun with 12" Tube

Undercar Series

9BU11T 9BU14T 9BU15T

▪ Ideal for machine, automobile, farm and
garden equipments, other vehicles etc.

Ø
Ø

L L

9BU14T
9BU11T 9BU15T

KT NO. L Ø Working pressure Burst pressure Capacity Kg

inch mm Screw thread psi bar c.c. oz

9BU111T 10-5/8 267 1/8" x 28 PT 2900 200 4000 275 120 3 0.68 1 / 30
9BU112T 10-5/8 267 10 x 1.0 Metric 2900 200 4000 275 120 3 0.68 1 / 30
9BU141T 10-5/8 267 1/8" x 28 PT 4500 310 7000 490 400 14 1.36 1 / 12
9BU142T 10-5/8 267 10 x 1.0 Metric 4500 310 7000 490 400 14 1.36 1 / 12
9BU151T 10-5/8 267 1/8" x 28 PT 4500 310 7000 490 500 16 1.58 1 / 12
9BU152T 10-5/8 267 10 x 1.0 Metric 4500 310 7000 490 500 16 1.58 1 / 12
9BU111T / 9BU141T / 9BU151T For general market except North America, Germany, South Africa, Egypt
9BU112T / 9BU142T / 9BU152T For Germany, South Africa, Egypt, etc.

608
Lubrication-Grease Gun
9BU2
▪▪Ideal for machine,
automobile, farm and
garden equipments, other
vehicles etc.

KT NO. L Screw thread Working pressure Burst pressure Capacity Kg

inch mm Ø psi bar c.c. oz

9BU241 14 360 1/8" x 28 PT 4500 310 10000 700 400 14 1.18 1 / 16

9BU242 14 360 10 x 10 Metric 4500 310 10000 700 400 14 1.18 1 / 16
9BU251 14.2 365 1/8" x 28 PT 4500 310 10000 700 500 16 1.52 1 / 16
9BU252 14.2 365 10 x 10 Metric 4500 310 10000 700 500 16 1.52 1 / 16
9BU241 / 9BU251 For general market except North America, Germany, South Africa, Egypt
9BU242 / 9BU252 For Germany, South Africa, Egypt, etc.

Lubrication-Grease Gun with 12" Tube

9BU2T
▪▪Ideal for machine, automobile, farm and
garden equipments, other vehicles etc.

9BU8109
9BU8209
9BU8112
9BU8212

L Screw thread Working pressure Capacity Kg

KT NO. inch mm Ø psi bar
Burst pressure c.c. oz

Undercar Series
9BU241T 14 360 1/8" x 28 PT 4500 310 10000 700 400 14 1.24 1 / 16
9BU242T 14 360 10 x 10 Metric 4500 310 10000 700 400 14 1.24 1 / 16
9BU251T 14.2 365 1/8" x 28 PT 4500 310 10000 700 500 16 1.63 1 / 16
9BU252T 14.2 365 10 x 10 Metric 4500 310 10000 700 500 16 1.63 1 / 16
9BU8109 9 229 1/8" x 28 PT
9BU8209 9 229 10 x 10 Metric
9BU8112 12 305 1/8" x 28 PT
9BU8212 12 305 10 x 10 Metric
9BU241T / 9BU251T For general market except North America, Germany, South Africa, Egypt
9BU242T / 9BU252T For Germany, South Africa, Egypt, etc.

Portable Bearing Packer

9BU41
▪▪Quick and easy way to pack bearings with less
mess
▪▪Suitable for bearing diameter up to 89 mm
▪▪Press the cap until old grease forced out and
replaced by fresh grease
g
505.2 1 / 36

609
 Oil Suction Gun
9BT250
▪ Designed for all purpose, quickly draining and filling oil and
other fluids for clutches, agricultural, and industrial chemical,
additives, transmission on differentials, brake master cylinders,
oil filters or other type of sumps or sampling engine oil
▪ Features 11" flexible plastic hose
L Capacity g
KT NO.
inch mm c.c. oz

9BT250 13.4 340 500 16 770.0 1 / 20

Slide Hammer Puller Set

9BQ01
▪ 5 lbs / 2.2 kgs slide hammer with 500 mm shaft
17
make more powerful PC.
▪ Three types to use : internal/external puller,
plate puller, dent puller
▪ Use for remove vehicle Hub, rear axle, bearing
or repair dent, etc…
Kg 7.5 1/2
CONTENTS:
• 1 PC. 500 mm T handle shaft • 1 PC. Twin head
• 1 PC. 5 lbs / 2.2 kgs hammer • 1 PC. Tripe head
• 1 PC. Axle puller • 1 PC. Adjustable nut
• 1 PC. Hub puller • 3 PC. 3.5” leg
• 1 PC. Hook • 3 set nut & bolt
• 1 PC. Locking pliers puller
Undercar Series

• 1 PC. Dent puller

• 1 PC. Central bolt
- Hex 19mm x 5/8” x 18UNF x L140mm

Axle Puller With Slide Hammer

9BQ11
▪ 5 lbs / 2.2 kgs slide hammer
▪ 500 mm T handle shaft
3
PC.
kg 4 1/4

CONTENTS:
• 1PC. 500 mm T handle shaft
• 1PC. 5 lbs / 2.2 kgs hammer
• 1PC. Axle puller

610
Auto Body Repair Tool Please wear proper safety gear while working.

9CF110
▪ Bumping hammer - rough

A B C L g
KT NO.
mm mm mm mm
9CF110 98.5 38 40 325 440.0 6 / 36

9CF120
▪ Light shrinking hammer - smooth

A B C L g
KT NO.
mm mm mm mm
9CF120 98 40 38 325 467.0 6 / 36

9CF130
▪ Straight pick & finishing hammer

A B L g
KT NO.
mm mm mm
9CF130 138 40 325 467.0 6 / 36

Undercar Series
9CF131
▪ Curved pein & finishing hammer

A B L g
KT NO.
mm mm mm
9CF131 140 40 325 467.0 6 / 36

9CF132
▪ Stright pein & finishing hammer

A B L g
KT NO.
mm mm mm
9CF132 141 40 325 460.0 6 / 36

611
 Auto Body Repair Tool & Set Please wear proper safety gear while working.

9CF210 9CF220
▪ Utility dolly ▪ Curved dolly

A B L Kg A B L Kg
KT NO. KT NO.
mm mm mm mm mm mm
9CF210 69 64 42.3 1.38 6 / 12 9CF220 58.6 45 133 1.63 6 / 12

9CF230 9CF241
▪ Heel dolly ▪ Thin toe dolly

A B L A B L Kg
KT NO. Kg KT NO.
mm mm mm mm mm mm

9CF230 60 30 79.3 1.13 6 / 12 9CF241 55 24 118 0.96 6 / 12

9CF240
▪ Toe dolly
A B L Kg
KT NO.
mm mm mm
9CF240 58.5 29.1 121 1.40 6 / 12

9CF-107 9CF-207 9CF-307

▪ All drop forged medium(SAE/AISI 1045,1055) carbon steel
7
▪ Hammers are hardened and tempered, including 3 hardwood handled hammers and 4 dollies PC.
Body Series

9CF-107 9CF-207 9CF-307

Kg
KT NO. Contents

9CF-107 9CF110 7.5

9CF130 9CF240

9CF120
9CF-207 7.1
1/2
9CF131
9CF220 9CF230

9CF-307 9CF241 7.1

9CF132
9CF210

612
Pneumatic Dent Puller
9CH212
▪▪With 3 LB ( 1.36 kgs ) sliding hammer
▪▪With brass valve and 1/4" air plug
▪▪With 13" length inlet hose
▪▪With 2 PC. pads ( 120mm , 150mm )
▪▪Air exhaust from the handle
kg 17 1/4

Bodywork File & Set Slide Hammer Bodywork Puller Set

9CM2 9CH01
▪▪Used for sheet-metal working ▪▪6 lbs / 2.7 kgs slide hammer with 540 mm shaft
▪▪Suitable for flat and curved surfaces make more powerful
▪▪Double-sides file with radial shape ▪▪Variety attachment adaptor suitable for different
▪▪For 9CM11 situation
▪▪Use for vehicle body panel and chassis or other
metal distortion etc…
kg 8.5 1/2
Teeth Length kg CONTENTS:
KT NO. Version inch mm • 1 PC. 540 mm handle shaft
• 1 PC. 6 lbs / 2.7 kgs hammer
9CM209 rough 8 355 0.33 1 / 50 • 1 PC. Large curve hook
• 1 PC. Small curve hook
9CM212 fine 12 355 0.33 1 / 50 • 1 PC. Large 90˚ hook
• 1 PC. Small 90˚ hook

Body Series
• 1 PC. Flat squashed attachment
9CM01 • 1 PC. Straight attachment
• 1 PC. Double attachment
▪▪Used for sheet-metal working • 1 PC. Tapping screw
▪▪Suitable for flat and curved surfaces • 1 PC. Hook attachment with chain
▪▪Double-sides file with radial shape
▪▪Lightweight aluminium body
▪▪1 PC. file included

9CM11

9CM209

Teeth Length kg
KT NO. Version inch mm

9CM01 rough 8 355 1.58 1 / 20

613
 Putty Knife Bolstered Scraper
9CJ1112 1-1/4" 9CJ2112 1-1/4"

1.8
0.2

A L g A L
KT NO. KT NO. g
inch mm inch mm inch mm inch mm
9CJ1112 1-1/4 32 8-1/2 218 60.0 24 / 144 9CJ2112 1-1/4 32 8-1/2 218 120.0 24 / 144

9CJ1120 2" 9CJ2212 1-1/4"

L
1.8

0.5 A

A L g A L
KT NO. KT NO. g
inch mm inch mm inch mm inch mm
9CJ1120 2 50 8-1/2 218 70.0 24 / 144 9CJ2212 1-1/4 32 8-1/2 218 120.0 24 / 144

9CJ1130 3" 9CJ2120 2"

1.8
0.5

A L
KT NO. g
inch mm inch mm
A L g
KT NO.
inch mm inch mm 9CJ2120 2 50 8-1/2 218 140.0 24 / 144
9CJ1130 3 76 8-1/2 218 82.0 24 / 144

Stainless Steel Bolstered

Body Series

Stainless Steel Putty Knife Set Scraper Set

9CJ013
9CJ023

3 3
PC. PC.

Kg
Contents 0.2 10 / 40
Kg
Contents 0.4 10 / 40

9CJ1112 9CJ1120 9CJ1130

9CJ2112 9CJ2212 9CJ2120

614
Pinch Weld Scraper Multi Purpose Single
9CJ3104 1/2" Edge Razor Scraper
9CJ61-40
▪ Ideal for scraping labels and decals
▪ Comfortable TPR handle for maximum grip
A L ▪ Accepts all standard single edge razor blades
KT NO. g
inch mm inch mm
9CJ3104 1/2 12 6-1/2 168 75.0 24 / 144

9CJ3105 5/8"

A L
KT NO. g
inch mm inch mm
9CJ61-40 1-1/2 40 9 235 145.0 6 / 72
A L
KT NO. g
inch mm inch mm
9CJ3105 5/8 15 8-1/2 218 108.0 24 / 144

9CJ3106 3/4"

A L
KT NO. g
inch mm inch mm
9CJ3106 3/7 19 6-1/2 168 75.0 24 / 144

Body Series
Stainless Steel Pinch Weld Scraper Set
9CJ033

3
Kg
Contents 0.3 10 / 40 PC.

9CJ3104 9CJ3105 9CJ3106

615
 Mini Panel Removal Set
9CI1101 9CI1201

L L
KT NO. g KT NO. g
inch mm inch mm
9CI1101 8 202 14.0 30 / 360 9CI1201 8 202 43.0 24 / 192

9CI1102 9CI1202

L L
KT NO. g KT NO. g
inch mm inch mm
9CI1102 8 202 13.0 30 / 360 9CI1202 8 202 28.3 40 / 320

9CI1103 9CI1203

L L
KT NO. g KT NO. g
inch mm inch mm
Body Series

9CI1103 8 202 16.0 30 / 360 9CI1203 8 202 20.8 24 / 228

9CI016
▪▪Easy to remove small trim items and panels with
slim profile 6
▪▪Made from impact resistant high quality nylon PC.
▪▪Applicable: Air vents, door panels, door locks,
dash trim, internal fittings, etc…
Kg 12 / 48
0.3

616
Windscreen Remove Tool Set
9CW01
▪ Use for removing glued of vehicle windows
▪ Use A with C to pierce the wire through the adhesive beads
▪ Use the cutting wire with B to remove adhesive beads

Wire L T Handle L g A-9CW11

KT NO. m mm
9CW01 22 330 456 8 / 32

B-9CW12

C-9CW13

CONTENTS :
• A - Wire feeder tool
• B - Wire pull handle - pair
• C - Triangle cutting wire - 22 meters

Double Suction Pad Holder

9CW21
▪ Lifting up to 65 kg in horizontal position
▪ Adjustable handle designed for curved surface
▪ Ø 120mm rubber vacuum cup can prevent from the damage of
surface and grip tightly
▪ Use for holding glass, tiles, sheet metal, etc…
Ø Load capacity g
KT NO. mm kg
9CW21 120 65 805 4/8

Body Series
Ø

Single Suction Pad Holder

9CW22
▪ Lifting up to 40 kg in horizontal position
▪ Ø 120mm rubber vacuum cup can prevent from
the damage of surface and grip tightly
▪ Use for holding glass, tiles, sheet metal…

Ø Load capacity g
KT NO. mm kg
9CW22 120 40 351 6 / 48

617
 Alternator Tool & Set
▪ Specialized in removing & installing freewheel pulleys on alternator.
▪ Ideal for dismantling and assembling the free wheel pulley while changing the alternator or pulley.
▪ The pulley shaft is held in place with the bit on 1/2"DR. socket whilst the nut is undone using the 33 teeth
union nut with 19mm spanner
▪ Suitable generator brand: Bosch, Valeo, Magetic Marelli,Denso, etc.
▪ It’s also interchangeable and comprehensive components to work on VW, Audi, Citroen/ Peugeot,
Mercedes, Renault, BMW, Flat, Ford, Toyota, etc

9DA103 1/2" 9DA104 1/2"

M10 spline T50 Star

Overall length Overall length g

KT NO. g KT NO.
Size mm Size mm
9DA103 M10 113 151 10 / 120 9DA104 T50 113 151 10 / 120

9DA022
▪ Specialized in removing & installing freewheel pulleys on alternator
▪ Suitable generator brand : Bosch, Valeo, Magetic Marelli, Denso, etc. 22
▪ It's also interchangeable and comprehensive components to work on PC.
VW, Audi, Citroen/Peugeot, Mercedes, Renault, BMW, Fiat, Ford, Toyota,
etc.
CONTENTS:
• 3 PC. Combined bit socket –
• 3/8"DR. x M10 x 90mmL / 1/2"DR. x T50 x 113mmL / 1/2"DR. x M10 x 113mmL
• 1 PC. Spline bit socket 1/2"DR x M10 x 110mmL
• 3 PC. 33 teeth socket –15mm HEX x19mm / 15mm Hex x17.5mm / 22mm Hex
Battery & Electrical

• 2 PC. Hex nut –22mm x 30mmL (Ø12.0mm) / 17mm x 35mmL (Ø14.7mm)

• 1 PC. - 35mm Round x 17mm hex (four pin)
• 1 PC. - 38mm Hex adaptor (three pin)
• 1 PC. - 28.6mm Round x H28 x H22 x 32mmL
• 2 PC. - Hexagon head nut –28H x H19 x 35mmL / 28H x H21 x 36mmL
• 1 PC. - M10 x H12 bit 64mmL
• 6 PC. - 10mm shank head bits 75mmL –T40 / T50 / M8 / M10 / H8 / H10
• 1 PC. - 1/2"DR. Bit holder
Kg
2.57 1/5

Spark Plug Boot Pliers

9DB201
▪ Remove spark plug cables safely and prevent
cable damge
▪ Pliers' handles and jaws are coated with a
heavy-duty plastic for sure grip
L Ø L1
KT NO. g
mm mm mm

9DB201 260 14~18 20 266 12 / 48

618
Circuit Tester
9DC22
▪ Bronze body housing Alligator clip
Cap
▪ Cover cap for contact needle
Test light
▪ Bulb of 24V/3W interchangeable
▪ Test voltage 6~24V Contact needle

▪ For application of D.C. circuits only Bronze body housing

L g
KT NO. Test range
mm
9DC22 107 6~24V 50.0 20 / 200

Automotive Voltage Tester

9DC23
▪ Insulated alligator clip with 150 cm cable
▪ 2 LEDs indicate positive(+)/negative(-) polarity
▪ Test voltage 3~48V
▪ For application of D.C. circuits only
▪ Two testing methods as illustration Sliding mechanism

Battery & Electrical

L g
KT NO. Test range
mm
9DC23 150 3~48V 52.0 10 / 100

619
 Digital Display Circuit Tester
9DC242
▪ For 6/12/24V DC systems 6~24V
+ 12.0V - 12.0V
DC Max. 3M
▪ For application of DC circuits only
▪ Check if the circuit is electrified or not by stainless steel stylus
▪ Bigger heavy duty insulated alligator ground clip
▪ 3M long retractable cable
▪ LCD display easy to read digital voltage display
▪ Powered from the power source being measured, no batteries required
▪ CE approval EN 61000-6-3(2007) , EN 61000-6-1(2007)
▪ Do not use on air bags
▪ Ultra-V will burn circuit board

Specification
Measured valtage 5~28V
Testing current <10mA
Operating temp -10~50° C
Operating humidity <80%

KT NO. Test Range g

9DC242 6, 12, 24 225 10 / 60 Negative (-) polarity

Positive (+) polarity

Circuit Tester with Nixie Display

9DC243
Battery & Electrical

▪ For 12/24/48V DC systems

12~48V
▪ For application of DC circuits only DC Max. 3M

▪ Check if the circuit is electrified or not by stainless (-) polarity (+) polarity (-) polarity < 0.3V > 62V
steel stylus
▪ Test by car battery or negative ground conversion
▪ 3M long retractable cable
▪ 1M extension cable
▪ Powered from the power source being measured,
no batteries required
▪ Nixie display easy to read digital voltage display
▪ CE approval EN 61000-6-3(2007) , EN 61000-6-1(2007)
▪ Do not use on air bags
▪ Ultra-V will burn circuit board

Specification
Measured valtage 0.3~60V
Testing current <10mA
Operating temp 0~50° C
Operating humidity ≦ 80%

KT NO. Test range g

9DC243 12, 24, 48 277 10 / 60 Positive (+) polarity Negative (-) polarity

620
Battery Tester Mechanic's Stethoscoper
9DD21 9DH11
▪ Test battery hydrometer quickly ▪ Ears covered with plastic, effective to separate
▪ Use to check battery condition and charge state from outside noise
▪ Detects hot or cold overcharge accurately ▪ 210mm extension probe can expand the space
▪ Tests all 6, 12, 24 volt system while operating or using in narrow space
g ▪ Quickly to find and detect the abnormal noise
85 10 / 100
with the probe
▪ Use for detecting various vehicles parts or
machine equipment
g
147 12 / 72

Digital Glow Plug Tester

9DM1A1
▪ Suitable for steel and ceramic glow plugs
▪ LCD Display
▪ Short circuit protection & reverse charging
protection
▪ Auto power off: 110 seconds
▪ 9V battery*1 (included)
▪ CE approval

Battery & Electrical

Size(mm) g
KT NO. Glow Plug(V) LxWxH
3.5-4.4-5-7-8.5
9DM1A1 135x78x33 356 6 / 36
10-11-24

621
 Gasoline Engine Injection Pressure Tester Kit
9DP1101
▪▪Used to identify and diagnose low fuel pressure
▪▪Shockproof gauge with dual reading of 0~120 PSI 81
and 0~8 bar PC.
▪▪Various kit of adapters for most injection systems
of European, Japanese and American vehicles,
includes Bosch CIS, GM TBI and MFI system
kg
5.0 1/4

No. Dedcription No. Dedcription

1 1PC. (0-120 psi/0-8bar) 20 1PC. Adapter (M14 male-female)

2 1PC. Connector Hose 21 1PC. Adapter (M10 male-M12 male)
3 1PC. Connector Hose 22 1PC. Adapter (M10 female-M12 male)
4 1PC. Connector Hose 23 1PC. Adapter (M8 female-M12 male)
5 1PC. Connector Hose 24 2PC. Adapter (M8 male-M12 male)
6 1PC. Connector Hose 25 1PC. Adapter (M14 male-M12 male)
7 1PC. Connector Hose 26 1PC. Adapter (M16 male-M12 male)
8 1PC. Connector Hose 27 1PC. Adapter (Banjo bolt M12)
9 2PC. Connector Tube (5/8"-18 male nut) 28 1PC. Adapter (Banjo bolt M12)
2PC. Connector Tube 29 1PC. Adapter (Banjo bolt M10)
10
(5/8"-18 invert flare nut) 30 1PC. Adapter (Banjo bolt M8)
11 2PC. Adapter (M16 female~5/8") 31 1PC. Adapter (Banjo bolt M6)
12 2PC. Adapter (M14 female~3/8") 32 1PC. Adapter
13 2PC. Adapter (M16 female~3/8") 33 1PC. Adapter (M8 male-M12 male)
14 2PC. Adapter (M14 female~3/8") 34 1PC. Adapter (M16 female-M12 male)
15 2PC. Adapter (M16 ar-10mm) 35 1PC. Adapter (M14 female-M12 male)
16 1PC. Adapter 36 1PC. Gauge Hook
17 1PC. Manifold Adapter 37 1PC. Repair Pack
Battery & Electrical

18 1PC. Manifold Adapter

19 1PC. Adapter (90 degrees)

Gasoline Compression Tester Kit

9DP130
▪▪Suitable for petrol engines on lawn mowers,
motorbikes, cars, trucks and so on. 8 3
PC. PC.
▪▪Quickly diagnose problems with pistons, rings,
and valves
▪▪Gauge has dual color scale with 0-300 PSI,
0-20 Kpa
▪▪Easy pressure release button on side of tester
▪▪Brass corrosion resistant fittings

KT NO. Max Pressure g

9DP1301 300PSI/20Kpa 1206 1 / 10

9DP1302 300PSI/20Kpa 1100 1 / 10

9DP1301 9DP1302

622
Diesel Engine Compression Tester Kit
9DP2301
▪ Suitable for testing cars and light commercial
11
vehicles with direct or indirect injection on diesel PC.
engine
▪ Gauge reading range from 0-1000 psi (0-70 bar)
▪ Includes a pressure gauge, various connect
adapter and replacement seal & washer
kg
2.58 1/6
No. Dedcription

A 1PC. 2-1/2” gauge with 420mm hose

B 1PC. Glow plug adapter (73.5mm*M10*1.25)
C 1PC. Glow plug adapter (54mm*M12*1.25)
D 1PC. Glow plug adapter (72mm*M14*1.25)
E 1PC. Dummy injector (114mm)
F 1PC. Dummy injector (64mm*M24*2.0)
G 1PC. Stanadyne dummy (112mm)
H 1PC. Glow plug adapter (114mm*M10*1.25)
I 1PC. Glow plug adapter (119mm*M10*1.0)
J 1PC. Dummy injector (75mm*M20*1.5)
K 1 Set Seal & washer
L 1PC. 90˚ Elbow
M 1PC. Clamp plate

Oil Pressure Tester Kit

9DP3201
▪ Suitable for testing engine oil pressure and
13
transmission pressure PC.
▪ Applicable to both gasoline and diesel engines,

Battery & Electrical

also suitable for passenger cars and light trucks
▪ Gauge reading range from 0-150 PSI (0-10 bar)
▪ Provided with an oil filter clamp for piercing
through oil filter canister when oil pressure switch
is hard to access
kg
2.1 1/5

Adapter
Black Silver
(Imperial threads) (Metric threads)
1/2” x 20 UNF M10 x P1.0

3/8” x 20 UNF M12 x P1.5

1/4” x 18 NPTF M14 x P1.5

1/8” x 27 UPT M16 x P1.5

R 1/8” DIN M18 x P1.5

623
 Multi-function Jump Starter

9DS11-16
▪ Lithium battery LiCo02 16000mAh / 59.2 WH
▪ Easy to check voltage and power from the screen
▪ Three-function LED torch : normal, flashing , SOS
▪ Two 5V USB output ports (mobile phones, MP3, etc…)
▪ 12V/16V/19V output ports
▪ 15V/1A input port (in-car charger)
▪ User-friendly design: Micro USB input port
▪ Intelligent battery clamp, prevent improper operation
by buzzer sound

P D
AC
DC MAX MAX
USB 5000°C < < 3000°C

SOS 99
USB

%
000 000
I2V 000 5.0V
Strobe
LCD
32~104°F C DISPLAY 1000mA
4h 0~40°C
Battery & Electrical

Capacity Cranking Peak LxIxE g

KT NO. Suitable country
mAh amp amp mm

9DS11-16A Europe 485 1 / 20

9DS11-16B 16000 300 600 185 x 75 x 33 America & Asia 485 1 / 20
9DS11-16D Australia & New Zealand 485 1 / 20

624
Universal Terminal Release Tool Set
9DT11
▪▪Suitable for most of the vehicles, VW Group,
11
BMW, Opel, Renault, Ford, Daimlerchrysler, PC.
Fiat, Toyota and Saab
▪▪Use to loose contacts easily or carry
out other applications in the field of car
electricity
A 9DT11-1 ABS 4.0mm round terminal
B 9DT11-2 3.5mm round terminal
C 9DT11-3 1.5mm round terminal
D 9DT11-4 Maxi power timer
E 9DT11-5 Pit pod / Faston 6.3mm
F 9DT11-6 JPT / SPT
G 9DT11-7 Micro timer 11
H 9DT11-8 Standard tool
I 9DT11-9 Standard 2.72mm
J 9DT11-10 Standard 1.48mm
K 9DT11-11 Standard 1.89mm
L 9DT11-12 Micro standard
g
850.0 1 / 10

Extra Option for Packing with EVA

9DT11E
▪▪Quick and professional repair of
11
malfunctions due to loose contacts PC.
▪▪Use on universal application in the field of
the car electricity

Battery & Electrical

▪▪Application for most of vehicles , VW
Group , BMW , Opel , Renault , Ford ,
Daimlerchrysler , Fiat , Toyota , Saab
g
1023.0 1 / 10

Safety Goggles
9CK
▪▪Soft PVC frame & lens high impact clear
polycarbonate
▪▪Anti-dust and anti-impact vents
9CK-101

L1 L2 g
KT NO. inch mm inch mm
9CK-101 2-7/8 74 6 153 70.0 20 / 200
9CK-102 2-1/2 63 6-1/4 170 38.0 6 / 60 9CK-102

625
 Steel Wire Brush
9CZ101
▪ Material : wood handle / steel wire L2

▪ Wire brush with three rows

H
H L1 L2
KT NO. g
mm mm mm L1

9CZ101 22 258 105 65.0 24 / 144

Pressure Oil Can

9TB225 9TB500
▪ Material: Plastic body (9BT225)
▪ Material: Metal body (9BT500)

Capacity g
KT NO. c.c.
9TB225 225 103.0 1 / 160
9TB500 500 302.0 10 / 60 9TB225 9TB500

Flexible A/C Detective Light

9TQ31
General Tool

on / off
L1 L2 L3 g
KT NO. mm mm mm
L1

9TQ31 34 400 140 107 1/5

L2 L3

A/C Leak Detector UV Light & Safety Glasses

9TQ03
▪ Universal tube(40cm) designed to reach into
narrow space
▪ 3-UV light bulb with safety glasses
▪ Works with two LR3 AA batteries (not include)

KT NO. Contents g

9TQ31 1PC
9TQ03 263 1 / 18
9CK-102 1PC

626
Refillable Pressure Sprayer
9TBA650
▪ Suitable for lubrication, cleaning brake systems, Safety pressure valve
removing dust and being anti-rust
▪ Two-position folding nozzle for a standard or
long stream spray pattern for narrow and
Air inlet valve
areas which are difficult to reach
▪ Aluminum canister
▪ Do not use with strong chemical or corrosive fluid
L

Always wear eye

protection while
using this tool

Two wa y
L g
KT NO. inch mm
9TBA650 11 287 290 1 / 12
Long nozzle - jet
Short nozzle - mis t

Clip Removal Pliers

9TC101
▪ For removal of door inner-linings and other trim
items held in place by plastic rivets

L g
KT NO. inch mm

General Tool
9TC101 9 230 241.0 12 / 48

Roller Stud Extractor Socket & Set

9TD401 1/2" 9TD014MR 1/2"
▪ Turned by means of the hexagonal drive or a 1/2" ▪ Roller stud extractor socket set
- 12.7 mm ratchet which has a through-hole for a bar
4
PC.
▪ For tightening or loosening studs

Ratchet
Socket
Screw

KT NO. D1 D2 L g Blow case size (mm) :

mm mm mm mm 210 x 111 x 49 (0.04CUFT)
9TD401-06M 6 24.5 21 60.0 150.0 10 / 180 Kg
Contents 1.10 1 / 25
9TD401-08M 8 24.5 21 60.0 150.0 10 / 180
9TD401-10M 10 27.5 21 69.5 190.0 12 / 120 9TD401 M6, M8, M10, M12
9TD401-12M 12 27.5 21 69.5 190.0 12 / 120

627
 Nut Splitter Set
9TD064
g
1895 1 / 12
4
Capacity Hex PC.
KT NO. inch mm (mm)
9TD601 5/16"~1/2" 9~12 12
9TD602 1/2"~5/8" 12~16 14
9TD603 5/8"~7/8" 16~22 19
9TD604 7/8"~1-1/8" 22~27 21

Blow case size (mm) :

260 x 175 x 60 (0.096CUFT)

9TD062
▪ For removing stubborn nuts or over tightened bolts without
damaging the bolt thread 2
PC.
▪ Suitable for nuts to a tensile class 6
▪ Do not overtighten to prevent damage to the threads under
the nut
g
609.4 12 / 36 Hex

Capacity Hex
KT NO. inch mm (mm)
9TD602 1/2"~5/8" 12~16 14
9TD603 5/8"~7/8" 16~22 19

Damaged Nuts Remover Socket & Set

9TD403 1/2" 9TD 1/2"
▪ Made of top quality SNCM alloy steel, provide
4
General Tool

good wear resistance and durability

PC.
▪ Ideal for the removal of rounded, damaged or 9TD034MR
corroded nuts, bolts, oil drain plugs, marine nuts
and bolts, exhaust manifold nuts, pipe nozzele, 5
and studs PC.
▪ No need for pounding, chisels or torches 9TD035MR

6
9TD036MR PC.
l

KT NO. D1 D2 ℓ L g
mm mm mm mm
9TD403-10M 16.0 22 8 50 70 10 / 180
9TD403-12M 18.0 22 11 50 77 10 / 180
9TD403-13M 20.0 22 11 50 84 10 / 180
Kg
9TD403-14M 21.0 22 11 50 85 10 / 180 KT NO. Contents
9TD403-17M 24.5 25 15 50 117 10 / 180
21, 22, 23
9TD403-19M 27.0 27 15 50 135 8 / 80 9TD034MR 0.58
27
9TD403-21M 29.4 27 16 50 138 8 / 80
8740705
9TD403-22M 30.5 27 17 50 140 8 / 80 12, 13,
9TD035MR 0.52 4/36
9TD403-23M 31.8 27 17 50 136 8 / 80 9TD403 14, 17, 19
9TD403-27M 36.0 27 18 50 146 6 / 120
10, 12, 13
9TD036MR 0.60
14, 17, 19 8740706

Can’t be used with

pneumatic wrench

628
Pry Bar & Set
• Grip material - PP+TPR
• Chrome vanadium alloy steel

9TK1 9TK014
▪ Packaged in plastic tray
▪ Pry bars are for prying and levering 4
▪ Sturdy blade minimizing lever spring effect PC.
▪ It's hardened and tempered for maximum durability

L
KT NO. g
mm Contents
Kg
1.87 5 / 10
9TK108 204 140.4 6 / 72
9TK108
9TK112 312 286.0 6 / 48 9TK112
9TK118 458 547.0 6 / 48 9TK118
9TK124
9TK124 608 677.2 6 /36

Jumbo Pry Bar & Set

9TK2
▪ For heavy-duty application
▪ Includes straight, 90, 45, 30 degree tip for variety
situation to use
9TK225A
▪ Extra long pry bar makes more powerful for
prying and levering 9TK225B
L
KT NO. Type kg
inch mm
9TK225A 25 625 90° 1.62 1/6 9TK236A
9TK225B 25 625 45° 1.51 1/6

General Tool
9TK236B
9TK236A 36 920 30° 2.07 1 / 12
9TK236B 36 920 Straight 2.06 1 / 12

9TK024
4
PC.
Kg
Contents 9.34 1 / 10
9TK225A
9TK225B
9TK236A
9TK236B

629
 Door Upholstery Remover
43280212 48280180
▪ Special tool to remove the lining and clip of Tip size:
the car 9.0

60°

Tip size: 43280212

5.5
60
60°

Tip Dia x length(mm) g 48280180

KT NO. mm L1 L2
43280212 9 8 x 120 240 140.0 12 / 144
48280180 5.5 6.35 x 100 210 92.6 12 / 144

Hook & Pick Set

• Grip material - PP+TPR
• Chrome vanadium alloy steel

43250115Y 43270115Y
▪ 10" Bent-pick ▪ 10" 90L-pick

L1 L1

L L

L L1
L L1 KT NO. g
KT NO. g mm mm
mm mm
43270115Y 260 150 94.4 12 / 144
43250115Y 260 150 93.8 12 / 144

43260115Y 43290115Y
General Tool

▪ 10" Hook-pick ▪ 10" Straight-pick

L1 L1
L L

L L1 g L L1
KT NO. KT NO. g
mm mm mm mm
43260115Y 260 150 95.0 12 / 144 43290115Y 260 150 90.0 12 / 144

9-30904AY
▪ Use for scribing, alignment, installing and removing
O rings, seals, cotter pins and washers 4
PC.

g
Contents 425.4 1/8
43250115Y 43270115Y
43260115Y 43290115Y

630
Radiator Hose Removal Tools
• Grip material - PP+TPR
• Chrome vanadium alloy steel

432A0113 432A0213
▪ 9-1/2" Lightning type removal tools
▪ 9-1/2" U type removal tools

L1 432A0113
L
L L1 g
KT NO. mm mm
432A0113 240 130 93.2 12 / 96
432A0213 240 130 100.8 12 / 96
L1 432A0213
L

Magnetic Flexible Handle

2121
▪ Grip Material-PP+TPR
▪ Enhanced flexible conduit for perfect shaping
▪ More powerful magnetic force
0.5KGS

Dia x length(mm) Magnetic

KT NO. Size g
For longer life, please
L1 L2 power(kg)
2121-12 12" Ø 5 x 305 415 0.5 100.0 1 / 100 don't shake or wave it.
2121-18 18" Ø 5 x 455 565 0.5 120.0 1 / 80

General Tool

631
 Magnetic Pickup Tool
2124
▪ Compact and ergonomic design for comfortable
holding
▪ Enhanced flexible conduit for perfect shaping
1.5KGS
▪ Solid crimping for holding tube and flexible conduit
▪ More powerful magnetic force
For longer life, please
▪ Comfortable pushing strength don't shake or wave it.
Dia x length(mm) Magnetic
KT NO. Size g
L1 L2 power(kg)
2124-18 18" Ø 13.5 x 450 610 1.5 181.0 1 / 36

Claw Pickup Tool

2126
▪ Compact and ergonomic design for comfortable holding
▪ Enhanced flexible conduit for perfect shaping
▪ Solid crimping for holding tube and flexible conduit
▪ Maximum claw width 1-1/4"
▪ Comfortable pushing strength
For longer life, please
don't shake or wave it.

L2

L1
General Tool

Dia x length(mm)
KT NO. Size g
L1 L2
2126-18 18" Ø11 x 450 610 1-1/4" 181.0 1 / 36
Ø

3 in 1 Pickup Tool
2129-24
▪ Compact and ergonomic design for comfortable holding
▪ Enhanced flexible conduit for perfect shaping 1.0KGS

▪ Solid crimping for holding tube and flexible conduit

▪ More powerful magnetic force
▪ Hook type claw 640

▪ Clamp light
Ø
▪ Comfortable pushing strength L1
▪ Lithium cell: LR521 x 3 L2

Size Dia xL1

length(mm) Magnetic g
KT NO. L2 power(kg)
For longer life, please
2129-24 24" Ø13 x 470 570 1.0 1-1/4" 280.0 12 / 48 don't shake or wave it.

632
Telescoping Magnetic Pick-Up Bar
2128-26
▪ Pen style for carring conveniently 130~640 m
m

1.6KGS

KT NO. Exlendable Length Magnetic g

mm Power
2128-26 130~640 3.5LBS/1.6KGS 45.6 50 / 200

Auto Inspection Tool Set

9TQ01
• Contents:
9TQ01-1
7
PC.
Stainless steel telescopic bar
9TQ01-2
3.5 lbs. magnet pick-up with LED light
9TQ01-3
Strong 8.0 lbs. magnet pick-up
2126-18
1/4"DR. T handle swivel head reversible ratchet
9TQ01-4
Round magnetic dish Dia. 100mm
9TQ01-5
Round inspection mirror-Dia. 50mm
9TQ01-6
Rectangular inspection mirror 89 x 50mm

General Tool
Kg
1.52 1/5

633
 10-1/2" Heavy Duty Replaceable Tip Circlip Pliers Set
45115PP
▪ Ideal for internal-external circlip removal and 15
replacment PC.
▪ Ratcheting locking action handles
Contents External Use

1 PC. Internal straight circlip pliers

68GS-11

1 PC. External straight circlip pliers

68RS-11
Internal Use
2 PC. 15° Internal interchangeable
68GR-01

2 PC. 45° Internal interchangeable

68GQ-01

2 PC. 90° Internal interchangeable

68GB-01

2 PC. 15° External interchangeable L Spread

KT NO. kg
inch mm inch mm Ømm Ømm
68RR-01
45115PP 10-1/2 267 2 50 - - 1.30 1 / 10
2 PC. 45° External interchangeable 68GS-11 10-1/2 267 2 50 85~100 3 0.31 25 / 50
68RQ-01 68RS-11 10-1/2 267 2 50 40~100 2.75 0.32 25 / 50

2 PC. 90° External interchangeable

68RB-01

6 PC. Screw(M5x0.8)
68ZZ-01

16" Internal-External Heavy Duty Circlip Pliers Set

General Tool

45211PP
▪ Ideal for Internal-External circlip removing and 11
replacment PC.
▪ Ratcheting locking action handles External Use
Contents

1 PC. Internal straight circlip pliers

68GS-16

1 PC. External straight circlip pliers

Internal Use
68RS-16

2 PC. 45° Internal interchangeable

68GQ-02

2 PC. 90° Internal interchangeable

68GB-02

2 PC. 45° External interchangeable L Spread

KT NO. kg
68RQ-02 inch mm inch mm Ømm Ømm
45211PP 16 406 3-1/4 85 - - 3.32 1 / 6
2 PC. 90° External interchangeable
68RB-02 68GS-16 16 406 3-1/4 85 82~175 3 0.93 1 / 25
68RS-16 16 406 3-1/4 85 82~165 3 0.97 1 / 25
6 PC. Screw(M6x1.0)
68ZZ-02

634
Kneeling Mat
9TG11
L
▪ Kneeling mat makes working more comfortable
during repairing wheels, brakes and exhausts
▪ Resistant to most of the chemicals and oil
▪ Easily clean surface A

▪ Light and small, easy to carry and available to

hang it
B
L A B
KT NO. g
mm mm mm
9TG11 455 214 30 125.7 1 / 18

LED Kneeling Mat

9TG12
L
▪ Kneeling mat with work lights for under car repair
or useful as a head protector
▪ 24 SMD LED lights
▪ Brightness: 600 Lumen(lm) A

▪ 3 x AA batteries not included

▪ Resistant to most of the chemicals and oil
B

L A B g
KT NO. mm mm mm
9TG12 460 270 30 320 1 / 25

General Tool
LED Folding Mat
9TG21
▪ Folding mechanics mat for mechanics sit /kneel
and lie on it
▪ 24 SMD LED lights
▪ Brightness: 600 Lumen(lm) L
▪ 3 x AA batteries not included B

▪ Folds for easy storage

▪ Resistant to most of the chemicals and oil

L A B g
KT NO. mm mm mm
9TG21 1150 420 24 991.6 1 / 10

635
 Wing Protector
9TP11
▪ Protection from unwanted scratches, dents and dirt
▪ Magnetic attachment keeps paintwork safe from damage
▪ Rugged, padded imitation leather and reinforced edges
provide a perfect, cushioned working area

Size g
KT NO. mm
9TP11 1050 x 650 649.0 1/8

9TP12
▪ Protection from unwanted scratches, dents and dirt
▪ Magnetic attachment keeps paintwork safe from
damage
▪ Rugged, padded imitation leather and reinforced
edges provide a perfect, cushioned working area

Size g
KT NO.
mm

9TP12 1050 x 650 649.0 1/8

9TP22
▪ Protection from unwanted scratches, dents and dirt
General Tool

▪ Magnetic attachment keeps paintwork safe from • Sucker can be

strongly adsorbed
damage
on the aluminum
▪ Rugged, padded imitation leather and reinforced
alloy material
edges provide a perfect, cushioned working area
▪ 3 suckers attached

Size g
KT NO.
mm

9TP22 1050 x 650 650.0 1/8

636
Wheel Axle Oil Drain
9TT21-03
▪ When the professional technician reaches for
an oil drainer pan it has to be light yet strong, a
L
3L
convenient size for the task in hand and easily
cleaned W

▪ The wheel Axle Oil Drain is designed for HGVs,

features a 3 litre capacity and is fits snugly into H

the dish of the wheel to catch the waste oil as

it is drained from the axle. It is also stable on the
workshop floor and easy to handle

L W H g
KT NO. mm mm mm CONTENTS :
9TT21-03 316 246 156 390 20 • Wheel axle oil drain pan with pouring lip
• Manufactured from PE plastic
• 3 litre capacity

Oil Drain Pan

9TT11-18
▪ This 18 litre Oil Drain Pan includes easy grip, large
carrying handles and integral spout for pouring
18L
waste oil or fluids into a recycling container. The
anti-splash lip prevents spillage. Ideal for draining
antifreeze or oil. ( Not suitable for spray gun
cleaner)
W

L W H g
KT NO. mm mm mm

General Tool
9TT11-18 681 570 130 920 15

CONTENTS :
• 18 litre capacity H
• Anti-splash lip
• Integral spout
• Ideal for draining antifreeze or oil
• Meets PAHS regulations L

637
 Pneumatic Brake Bleeder
9TV12-02
▪▪Air operated, handle trigger and noise-
reduction design, easy and quick to use
▪▪Replace the old brake fluid without
leakage
▪▪With 1m silicon hose and universal rubber
adapter

Max. Working Temperature Air inlet

KT NO. Type g
Capacity pressure (Psi) range

9TV12-020 European 2L 40~170 -19°C~60°C 1/4" 1050 1 / 12

9TV12-021 American 2L 40~170 -19°C~60°C 1/4" 1050 1 / 12

10L Pneumatic Oil(Atf) & Liquid Despenser

9TV13
▪▪Use to extract, transfer and dispense fluid quickly, safety and
cleanly
▪▪Non-spark, one man in same step can operate
▪▪Provide with the safety valve, pre-setting 43 psi (3 Bar), the
exceed pressure will be relief automatically
▪▪Provide with the pressure gauge, can be read & control the
pressure in the tank more easily
▪▪Provide 2 way control valve for dispensing more safety
▪▪8 PC. one touch transportation adapter
General Tool

EXTRACT DISPENSE

Max. Working Temperature Air inlet g

KT NO. Capacity pressure (Psi) range
EXTRACT DISPENSE 9TV13-100 10 L 90 -19°C~140°C 1/4" 4.75 1

Manual Fluid Extractor

9TV21-09
▪▪Capacity : 9 litre
▪▪Use for extracting all types of engines oil,
transmission fluid and lubricants of cars, marine,
stationary, motorbikes engines etc…
• Silicon hose x 1.2 m
• Nylon hose x 1.1 m
• Nylon hose x 1.0 m

Max. Temperature g
KT NO. Capacity range
9TV21-09 9L -19°C~90°C 4750 1/2

638
Pneumatic Grease Pump 20L
9TU11
▪▪The barrel body is made of high-grade steel plate. It
can contain 5 gallons of barrel packed grease from
all nations around the world
▪▪Suitable for all sorts of machinery, vehicles, airplanes,
ships, etc. The efficient instrument for infusing grease
powerfully for lubrication & maintenance purpose
▪▪Pump of separate type: utilize the principle of liquid
getting pumped & driven by air compressor to draw
in liquid. There are two independent & separate
cycle systems of pump out there, which prevents
air- compressor-exhaust moisture from getting to the
grease inside the barrel and deteriorating its quality

Air Input Pressure Pressure Grease Output Pressure Deliver Rate Hose Length kg
KT NO. Capacity CUFT
(bar) (psi) Ratio (bar) (psi) (cc/sec) (ft)
9TU11-20 20 L 4-9 60-130 45:1 180-405 2700-5850 30 10 21.0 6.4

Hand Grease Pump 20L

9TU21
▪▪20L tank for 5 gallons grease oil
▪▪Suitable for #00,#0,#1,#2 grease oil
▪▪Included 1.8m length hose & pistol sprayer
▪▪1/4” High pressure 10,000 psi W.P oilfield hose
▪▪Portable equipment with single pull handle
▪▪Suitable for all sorts of machineries, vehicles, airplanes, ships, etc

General Tool
KT NO. Capacity Transmission rate Hose Length N.W. G.W. CUFT

9TU21-20 20 L 4 cc/stroke 1.8 m 7 Kg 9.5 Kg 2.2’

Oil Transfer Bucket Pump 20L

9TW21
▪▪Lever pump 20 L tank for oil
▪▪Suitable for diesel fuel, lubricating oils up to SAE90 and
▪▪Non-corrosive fluids.
▪▪Included 1.8m length hose & sprayer
▪▪Portable equipment with single pull handle

KT NO. Capacity Deliver Rate Hose Length Outlet tube N.W. G.W. CUFT

9TW21-20 20 L 65 cc/stroke 1.8m 3/8” 7 Kg 9.5Kg 2.2’

639
 e provide
h ig h q u a lity tools, w
tegrality & e believe, c
hoosing a
o ff e rs p ro fessional in jo b s. A s w
always ir tough ersified
King Tony n a ls to c omplete the e r to sa ti sfy more div
ss io safety, in o rd
assist profe iciency and
tools which y in c re a se e ff
e rn a ti ve product
line.
o l m a u r a lt
high-accura
cy to ER” as o
la u n ch “START
chanic s, w e d non-
fields of me n g in n o n -v io le n t a n
h o a re u si ualified
fo r p ro fe ss io n a ls w u a li ty st a n dards and q
th e to o ls ational q tools
It c o n ta in s R T E R e xceeds intern c h a n ic s to extend more
ST A oice for m e is great
workplace, is a smart ch TARTER
continuous e c h a n ic s. It o rk w it h S
e targeted m emand, w
for use of th ls se ts a c c ording to d
too
TARTER ssional.
from the S rw a rd as high profe
mov e fo
initial step to
Hex Key Set
ST20219MR ST20209MR
9 9
PC. PC.

Kg 0.48 8 / 48
Spec. Contents
Kg 0.30 6 / 48
Spec. Contents Extra long H1.5, H2, H2.5, H3, H4, H5, H6,
Standard H1.5, H2, H2.5, H3, H4, H5, H6, arm 1125MR H8, H10
arm 1145MR H8, H10

ST20213MR ST20207MY
13
PC. 7
PC.

Kg 1.88 2/8
Spec. Contents
Kg 0.54 8 / 48
Spec. Contents
H2, H2.5, H3, H4, H5, H6,
Standard arm
H7, H8, H10, H12, H14, H17, Extra long
hex-head key 1145MR H3, H4, H5, H6, H7, H8, H10
H19 arm 1125MY

ST20219MY ST20208MY
9 8
PC. PC.

Kg 0.48 8 / 48
Spec. Contents
Kg 0.30 6 / 48
Spec. Contents Extra long
H2, H2.5, H3, H4, H5, H6, H8, H10
Standard H1.5, H2, H2.5, H3, H4, H5, H6, arm 1125MR
arm 1145MY H8, H10

ST20219MY1
9
PC.

Kg 0.28 10 / 80
Spec. Contents
starter

Standard H1.5, H2, H2.5, H3, H4, H5, H6,

arm 1145MY H8, H10

ST20219SY

9
PC.

Kg 0.28 10 / 80
Spec. Contents
Standard 5/64, 3/32, 1/8, 5/32, 3/16, 7/32,
arm 1145SY 1/4, 5/16, 3/8

641
 Hex Key Set
ST20139SY ST20139MY
9 9
PC. PC.

Kg 0.37 8 / 64
Kg 0.39 8 / 64 Spec. Contents
Spec. Contents
H1.5, H2, H2.5, H3, H4.5, H6,
5/64, 3/32, 1/8, 5/32, 3/16, long arm / ball
long arm / ball 1130MY H8, H10
1130SY 7/32, 1/4, 5/16, 3/8

ST20109MR ST20407PR
9 7
PC. PC.

Kg 0.48 8 / 48
Spec. Contents

Extra long arm / H1.5, H2, H2.5, H3, H4, H5, Kg 0.13 15 / 120
Spec. Contents
ball 1120MR H6, H8, H10
Standard arm / T10H, T15H, T20H, T25H, T27H,
Tamper resistant 1147R T30H, T40H

ST20120MR
10 ST20419PR
PC.
9
PC.
Kg 0.35 6 / 60
Spec. Contents

H1.27, H1.5, H2, H2.5, H3, Kg 0.47 8 / 48

long arm / ball Spec. Contents
1130MR H4, H5, H6, H8, H10
Extra long arm / T10H, T15H, T20H, T25H, T27H,
Tamper resistant 1127R T30H, T40H, T45H, T50H

ST20220MR
10
PC.

Kg 0.48 8 / 48
Spec. Contents

Extra long arm H1.27, H1.5, H2, H2.5, H3,

/ ball 1120MR H4, H5, H6, H8, H10
starter

642
Socket Set
ST2346MR 1/4"
Blow case size (mm) :
254 x 147 x 46 (0.16 cuft) 46
Kg PC.
Contents 1.06 1 / 12

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,

2335M
12, 13, 14

2033 T8, T10, T15, T20, T25, T30, T40

2035 H3, H4, H5, H6, H7, H8

2031 PH1, PH2, PH3

2032 4, 5.5, 7

2038 PZ1, PZ2, PZ3

1115-14 H1.27, H1.5, H2, H2.5

2222-02
2766-55G 2791 2222-04
2571-45 2312-06 2179
2766DK

ST4028MR ST4028SR 1/2""

ST4528MR ST4528SR 1/2""
Blow case size (mm) :
387 x 223 x 58 (0.18 cuft) 24
PC.

4766DK
ST4028MR/ST4528MR ST4028SR/ST4528SR 24
PC.
Kg 1.06 1/4
KT NO. Contents
starter

8, 9, 10, 11, 12, 13, 14, 15, 16

ST4028MR 4330MRC
17, 18, 19, 21, 22, 24, 27, 30, 32

463021HC
5/16", 3/8", 7/16", 15/32"
ST4028SR 4330SRC 1/2",9/16", 19/32", 5/8", 11/16"
3/4", 25/32", 13/16", 7/8" 4251-05R
15/16",1", 1-1/16", 1-3/16", 1-1/4"
4766-10G
4251-10R
8, 9, 10, 11, 12, 13, 14, 15, 16
ST4528MR 4335MRC 4572-12 4791
17, 18, 19, 21, 22, 24, 27, 30, 32

5/16", 3/8", 7/16", 15/32" 463521HC

1/2",9/16", 19/32", 5/8", 11/16"
ST4528SR 4335SRC 3/4", 25/32", 13/16", 7/8"
15/16",1", 1-1/16", 1-3/16", 1-1/4"

643
 Socket & Wrench Set
SC7083MR SC7583MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft)
83
PC.

Kg 5.65 1/4
KT NO. Contents
8, 10, 11, 12, 13, 14, 17, 19
1060
2766-55G
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, PH1, PH2
2031
2330M 11, 12, 13, 14 4766-10G
4, 5.5, 6.5
14, 15, 16, 17, 18, 19, 20, 2032
SC7083MR 4330MRC 22, 24, 27, 30, 32 79831
T8, T10, T15, T20, T25, T27, T30
2033
463016R
2179DF
H3, H4, H5, H6
463021R 2035

PZ1, PZ2 4251-05RH

2038
PH3, PH4 2222-02
starter 1836P 2222-04
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 8x1.2, 10x1.6, 12x2.0
11, 12, 13, 14 1836S 2312-06
2335M
T40, T45, T50, T55 4222-10
14, 15, 16, 17, 18, 19, 20, 22, 1836T
SC7583MR 24, 27, 30, 32
4335MRC H8, H10, H12, H14 2571-45
1836H

463516HC 7702-25
PZ3, PZ4
1836Z
463521HC
2791 3824 414810S
4791RH

644
Socket & Wrench Set
SC7096MR SC7596MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft)
96
PC.

Kg 6.22 1/4
KT NO. Contents

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, PH1, PH2

11, 12, 13, 14 2031 2766-55G
2330M

4, 5.5, 6.5
6, 7, 8, 9, 10, 11, 12, 13 2032 4766-10G
2230M
T8, T10, T15, T20, T25,
14, 15, 17, 19, 22 T27, T30
2033 2179DF
4230MC
SC7096MR
10, 11, 12, 13, 14, 15, 16, H3, H4, H5, H6 4222-10
17, 18, 19, 20, 21, 22, 24, 2035
4330MRC 27, 30, 32
2222-02
463016R PZ1, PZ2 2222-04
2038

463021R
PH3, PH4 4251-05RH
1836P
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 2571-45
11, 12, 13, 14 8x1.2, 10x1.6,
2335M
starter

1836S 12x2.0
2791
6, 7, 8, 9, 10, 11, 12, 13 3824 4791RH
T40, T45, T50, T55
2235M 1836T

14, 15, 17, 19, 22 7702-25 414810S

4235MC H7, H8, H10, H12,
SC7596MR H14
1836h
10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 24, 2745
PZ3, PZ4
4335MRC 27, 30, 32
1836Z

463516HC
1.5, 2, 2.5

463521HC 1115-03

645
 Socket & Wrench Set
SC7010MR SC7510MR 1/4"+1/2"
Blow case size (mm) :
422 x 275 x 85 (0.35 cuft)
110
PC.

SC7510MR SC7010MR
Kg 6.90 1/4
KT NO. Contents

E4, E5, E6, E7, E8

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 2375M 2766-55G
13, 14
2330M
E10, E11, E12, E14,
6, 7, 8, 9, 10, 11, 12, 13 E16, E18, E20, E24 4766-10G
4375M
2230M

14, 15, 17, 19, 22 PH1, PH2 2179DF

SC7010MR 2031
4230MC
4, 5.5, 6.5 4222-10
10, 11, 12, 13, 14, 15, 16, 17, 18, 2032
19, 20, 21, 22, 24, 27, 30, 32
4330M T8, T10, T15, T20, T25, 2571-45
2033 T27, T30
463016R 463021R
2222-02
H3, H4, H5, H6
2222-04
2035

4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,

starter

PZ1, PZ2 4251-05RH

13, 14 2038
2335M

PH3, PH4
6, 7, 8, 9, 10, 11, 12, 13 1836P 2791
2235M 3824 4791RH
8x1.2, 10x1.6, 12x2.0
1836S
SC7510MR 14, 15, 17, 19, 22
4235MC T40, T45, T50, T55, T60 7702-25 414810S
1836T
10, 11, 12, 13, 14, 15, 16, 17, 18,
19, 20, 21, 22, 24, 27, 30, 32 H7, H8, H10, H12, H14
4335M
1836H 2745

463516HC 463521HC PZ3, PZ4 1.5, 2, 2.5

1836Z 1115-03

646
Socket & Wrench Set
SC9043MR SC9043MR01 1/4"+3/8"+1/2"
Blow case size (mm) :
560 x 400 x 110 (0.87 cuft) 143
PC.

Kg 13.7 1/2
KT NO. Contents

2330M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10

2375M E4, E5, E6, E7, E8

3330M 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22

4330M 8, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 27, 30, 32

4375MC E10, E12, E14, E16, E20

SC9043MR 1060 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24
1930 8 x 10, 10 x 12, 11 x 13, 12 x 14, 17 x 19
79093-03M
1145MR H1.5, H2.0, H2.5, H3.0, H4.0, H5.0, H6.0, H8.0, H10

1025P PH0, PH1, PH2, PH3

1025S 4, 5.5, 7

1025U T10, T15, T20, T25, T27, T30, T40

1025H H2, H3, H4, H5, H6, H7, H8, H10

1025Z PZ0, PZ1, PZ2, PZ3 starter

1421 PH2 x 38, PH1 x 80

1461 PH2 x 100

1422 6.5 x 38, 5.5 x 75

1462 6.5 x 150

463016R 463021R
SC9043MR01 2222-02 3221-03
2222-04 3221-06 4251-03R 4222-10
79094-03M 2222-06
3824 2179DF 2312-06 3781-11F
2791
3792 79831 6111-07 2141 6011-10R
4791R
4452-18FR 4581-10 7821-30 3812

4766-10G 2766-55G

647
 Socket & Wrench Set
SC9543MR SC9543MR01 1/4"+3/8"+1/2"
Blow case size (mm) :
560 x 400 x 110 (0.87 cuft) 143
PC.

Kg 13.7 1/2
KT NO. Contents

2335M 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10

2375M E4, E5, E6, E7, E8

3330M 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22

4335MRC 8, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 27, 30, 32
4375MC E10, E12, E14, E16, E20
SC9543MR 1060 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24
1930 8 x 10, 10 x 12, 11 x 13, 12 x 14, 17 x 19
79093-03M
1145MR H1.5, H2.0, H2.5, H3.0, H4.0, H5.0, H6.0, H8.0, H10

1025P PH0, PH1, PH2, PH3

1025S 4, 5.5, 7

1025U T10, T15, T20, T25, T27, T30, T40

1025H H2, H3, H4, H5, H6, H7, H8, H10

starter
1025Z PZ0, PZ1, PZ2, PZ3

1421 PH2 x 38, PH1 x 80

1461 PH2 x 100

1422 6.5 x 38, 5.5 x 75

1462 6.5 x 150

463516HC 463521HC
SC9543MR01 2222-02 3221-03
2222-04 3221-06 4251-03R 4222-10
79094-03M 2222-06
3824 2179DF 2312-06 3781-11F
2791
3792 79831 6111-07 2141 6011-10R
4791R
4452-18FR 4581-10 7821-30 3812

4766-10G 2766-55G

648
Tool Trolley
ST87432-5B ST87434-7B
5 Drawer & 7 Drawer Tool Trolley
■ Heavy duty ball bearing slides
■ 5”x1-1/4” casters with locking break
■ One piece wall constructed and powder coating
■ Central locking system
■ Oil can holder / optional side pull handle bar
■ 2mm anti-slipping rubber top mat
■ Overall size: W670 x D460 x H812 mm
ST87432-5B Kg 52 CUFT 12.64
ST87434-7B 60

ST87432-5B ST87434-7B

starter

649
 I nternal
hexa g o n
E xt ernal
hexa g o n
B i-
hexa g o n
Sign List & Index
S p l ine
head
S p l ine head -
tamp er
res is tant
I nternal
to rx
E xt ernal
to rx
E x ternal to rx -
tamp er
res is tant
Do u b l e
sq u are

to rx p l u s - to rx p l u s Rib e b it P hil l ip s S l o tted I nternal E tx ernal

tamp er so cke t head head P o zi d riv sq u are sq u are B al l hex
res is tant

E tx ernal Rib e s o ck et Rib e s o ck et Axi al l o ck H o o k C enter E tx ernal

sq u are S q u are C ro w f o o t w rench cu t circl ip
12 mm 10 mm nu t

I nternal Max. Free Air S td . b o l t Anvi l Av g . air

circl ip to rq u e Air inl et sp eed p ressu re si ze Air ho se typ e co ns u mp tio n

Ø
V ib ratio n T hin C o arse With Ro u nd H al f - ro u nd Fl at &
S o u nd o p ening Diameter
l eve l se rrated s rrated
e s p ring j aw s j aw s p o int j aw s

( mm)
C ap acity o f Med iu m H ard w ire America Au ts ral ia &
S o f t w ire P iano w ire E u ro p e E ng l ish
o p en j aw hard w ire & Asi a N ew Z eal and

C hang eab l e G u id e C u tter O u tsi d e Wal l I nsi d e

Au st ral ia d iameter d iameter
b l ad e ro l l ers w heel ( O . D. ) thickn ess ( I . D. )

D P BELT CHAIN

With s mal l With ve ry Witho u t Diese l P etro l T iming T iming

With b eve l eng ine eng ine b el t chain
b eve l sm al l b eve l b eve l

S mal l C o ns tru ctio n P asse ng er Ag ricu l tu ral

H G V co mmercial B u se s C hassi s E ng ine
v ehicl es cars Facto ry machinery
v ehicl es se ries

Ag ricu l tu ral S teel Asse mb l y 410 Ad j u s tment 11 mm

machinery - Mo to rcy cl es 15 w att Mag netic
til l er co ns tru ctio n l ine l u men b u tto n thickn ess

U S B
U S B chang er 5V , 3. 7 V - 2200mAh C harg ing time Lig hting f o r
cab l e 1000mA Li- io n b attery f o r 4 ho u rs 2. 5 ho u rs

( g ) ( kg )
Q ’ ty / Q ’ ty / B o x Q ’ ty / C E V DE G .S . T U V
Weig ht IS O
C arto n B l ist er card certificate certificate ap p ro a
v l certificate

1000V
E S D
Information-General
EN D TH E LEVE N O T P U L M O D IF Y T
EXT O O T O

L
R A

O L
OT

N
RM
D O N

S
D O
W W W

Safety
A R R NING AR
R NIN
G AR
R NIN
G

H IT H A N D T U S E A S H A M N O T F O R IM P A C T W R
O T O T OLS

Recommendations

O O

ENC
M E

TO
N

N
L S

HES
HAND
R
D O

D O
W G W G W G
AR AR AR
R NIN R NIN R NIN

R A G E O N O N E D R A T U
S E W O R N G U S E A S P R Y U S E W R O N G -S IZ E D T O O F W
O R N -O U
T
T O N A O T O T H T SE
W
L Y

TO
O L
NG

S IZ
O

B A
E R

O
E

O LS
N
D O N
S

D IS P
R IG
LE
O P

S
R

E
D O

D O
inch m
m

W G W G W G W G W G W G W G
AR AR AR AR AR AR AR
R NIN R NIN R NIN R NIN R NIN R NIN R NIN

▪ Please wear proper

safety gear while
working.
 It all fits together
■ DIN screwdrivers
Slotted screws Phillips + Pozidriv

Size 2x0.4 2.5x0.4 3x0.5 3.5x0.6 4x0.8 5.5x1 6.5x1.2 8x1.2 10x1.6 Size 00 0 1 2 3 4
Metric screws Metric screws
Flat head Flat head
M ISO 4 M ISO DIN 1.6 2.5 3.5 8
1.6 2 2.5 3 3.5 6
2009 5 7046 965 2 3 5 10
Oval head
M DIN 3 ISO 1.6 2.5 3.5 8
M DIN
1.6 2 2.5 4 5 6
963 3.5 7047 966 2 3 5 10
Oval head Pan head
M ISO 4 M ISO DIN 1.6 2.5 3.5 8
1.6 2 2.5 3 3.5 6
2010 5 7045 7985 1.8 3 5 10

M Self tapping screws

DIN 3
1.6 2 2.5 4 5 Flat head
964 3.5 B ISO DIN 2.2 3.5 5.5
Cheese head 7049 7981 2.9 4.8 6.3
M ISO
3.5 4 5 6 Oval head
1207 B ISO DIN 2.2 3.5 5.5
7050 7982 2.9 4.8 6.3
M DIN 1.6
2 2.5 4 4 5 6 Pan head
84 1.8 B ISO DIN 2.2 3.5 5.5
Pan head 7051 7983 2.9 4.8 6.3
M ISO
1.6 2 2.5 3 3.5 4 5 6 ANSI
1580
screws 0-1 2-4 5-10 12-16 18-...
M DIN 4
3 3.5 6
85 5

M DIN
2.5 3/3.5 4 5 6 8 10
920

M 3
DIN
1.6 2 2.5 4 5 6
921 3.5 ■ How to find the correct screwdriver
Set
M ISO DIN 2.5 5
Slotted Phillips Pozidriv Torx Torx Square Hex Nut
4766 551 3.5 4 8
7435 417
3 6

M ISO DIN 2.5 5 Classic

1412 1411
3.5 4 8 14 Screwdriver
4735 427 3 6
SoftFinish
1422 1421 1428 1423 1427 1424
Self tapping screws Screwdriver
Flat head Classic
B ISO 4.2 Screwdriver 1482 1481
2.2 2.9 3.5 (Heavy Duty)
1482 4.8
SoftFinish
B Screwdriver 1462 1461
DIN 3.5 4.2 (heavy Duty)
2.2 2.9
7972 3.9 4.8 1450
Nutspinner 5450
Oval head
1453
B ISO 4.2
2.2 2.9 3.5 SoftFinish
1483 4.8 1472 1471 1478
Electric
B Precision
DIN 3.5 1432 1432 1433
2.2 2.9 4.2 4.8 6.3 Screwdriver
7973 3.9
erchangeable
Pan head ratchet 32810 32810 32810
B ISO 4.2 5.5 Screwdriver
2.2 2.9 3.5
1481 4.8 6.3 2411 2411
Two-way 1317
1317 1317 1317 1317 32810
screwdriver 2433
B 2431 2431
DIN 4.2 5.5
2.9 2.9 3.5 Torque
7971 4.8 6.3 3411
Screwdriver
 Internal Torx

For torx head screw

T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40
mm 1.42 1.70 1.99 2.31 2.50 2.74 3.27 3.86 4.43 4.99 5.52 6.65
Metric screws
Cheese head
M ISO DIN
* 2 * 2.5 3 4 5 ** 6
4762 912
Flat head
DIN
M ISO
963 * * * 2.5 3 3.5 4 5 ** 6 8
4760
965
Oval head
ISO DIN
M 7047 964 * 2 * 2.5 3 3.5 4 5 ** 6
2010 966
Cheese head
DIN
M 7984 * * * 2.5 3 4 5 ** 6
6912
Oval head
M ISO DIN
* 2 * 2.5 3 3.5 4 5 ** 6
7045 7985

Flat head
M ISO DIN
* * * 2.5 3 4 5 6 ** 8
10642 7991

Self tapping screws

Pan head
DIN 4.2
B ISO
7981 * 2.2 * 2.9 3.5 3.9 4.8 ** 6.3
7049
7982
5.5
Flat head
B DIN 4.8
ISO
7972 * 2.2 * 2.9 3.5 3.9 4.2 ** 6.3
7050
7983
5.5
Oval head
B ISO DIN 4.8
* 2.2 * 3.5 3.9 4.2 ** 6.3 8
7051 7973 5.5

* Screws for tungsten carbide inserts ** Special screws

Index
ISO International standard
DIN German standard

M Metric screws Thread diameter

M Set screw metric Thread diameter
M Metric nut Thread diameter
B Self tapping screw Thread diameter
Symbols
Tool drive = screwdriver socket
for screws with internal drive
Took drive = Nutdriver socket
for screws with head drive
 Bits / Sockets for S size
T5 T6 T7 T8 T9 T10 T15 T20 T25 T27
S(ref.mm) 1.42 1.7 2 2.32 2.5 2.74 3.28 3.86 4.43 4.99
Screws(ref) M1.5 M2 M2.5 M2.5 M3 M3/M3.5 M3.5/M4 M4/M5 M4.5/M5 M4.5/M5/M6
TORX T30 T40 T45 T50 T55 T60 T70 T80 T90 T100
internal
screw S(ref.mm) 5.52 6.65 7.82 8.84 11.23 13.26 15.54 17.58 19.95 22.16
Screws(ref) M6/M7 M7/M8 M8/M10 M10 M12 M14 M16 M18 M20 M22

M4 M5 M6 M8 M10 M12 M14 M16 M18 M20

S(ref.mm) 3.6 4.8 6 7.2 9.6 11.41 13.22 15.63 16.85 19.25
SPLINE Screws(ref) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20

M5 M6 M7 M8 M9 M10 M12 M13 M14 M16

S(ref.mm) 5 6 7 8 9 10 12 13 14 16
W(ref.mm) 1.1 1.3 1.4 1.7 1.9 2.2 2.6 3 3.1 3.5
RIBLE
Screws(ref) M6 M8 M10 M10 M12

IPR8 IPR9 IPR10 IPR15 IPR20 IPR25 IPR27 IPR30 IPR40 IPR45 IPR50 IPR55

BIT S(ref.mm) 2.19 2.6 2.58 3.1 3.64 4.12 4.71 5.23 6.3 7.38 8.35 10.63

E4 E5 E6 E7 E8 E10 E11 E12 E14 E16 E18 E20

S(ref.mm) 3.83 4.72 5.69 6.17 7.47 9.37 10.03 11.12 12.85 14.71 16.64 18.41
Screws(ref) M3 M4 M5 M6 M6/M7 M8 M8/M10 M10 M12 M12 M14 M16
TORX E22 E24 E26 E28 E30 E32 E34 E36 E38 E40 E42 E44
external
screw S(ref.mm) 20.24 22.1 23.85 25.65 27.38 29.16 30.96 32.82 34.67 36.37 38.2 39.98
Screws(ref) M18 M18/M20

0 1 2 3

SQUARE S(ref.mm) 1.73 2.26 2.84 3.32

 Torque Data
Bolts and nuts classes
(Metric threads, triangular shape, high pitch,0.15 coefficient)

4. 8 5 .8 6 .8 8 .8 10 . 9 12. 9
T o rq u e T o rq u e T o rq u e T o rq u e T o rq u e T o rq u e
mm mm mm N m N m N m N m N m N m
M3 5.5 2.5 0.64 0.8 0.91 1.21 1.79 2.09
M4 7 3 1.48 1.83 2.09 2.78 4.09 4.79
M5 8 4 2.93 3.62 4.14 5.5 8.1 9.5
M6 10 5 5 6.2 7.1 9.5 14 16.4
M8 13 6 12.3 15.2 17.4 23 34 40
M10 16 8 24 30 34 46 67 79
M12 18 10 42 52 59 79 116 136
M14 21 12 67 83 94 127 187 219
M16 24 14 105 130 148 198 291 341
M18 27 14 145 179 205 283 402 471
M20 30 17 206 254 291 402 570 667
M22 34 17 283 350 400 552 783 917
M24 36 19 354 438 500 691 981 1148
M27 41 19 525 649 741 1022 1452 1700
M30 46 22 712 880 1005 1387 1969 2305
M33 50 24 968 1195 1366 1884 2676 3132
M36 55 27 1242 1534 1754 2418 3435 4020
M39 60 1614 1994 2279 3139 4463 5223
M42 65 32 1995 2464 2816 3872 5515 6453
M45 70 2497 3085 3525 4847 6903 8079
M48 75 36 3013 3722 4254 5849 8330 9748
M52 80 3882 4795 5480 7535 10731 12558
M56 85 41 4839 5978 6832 9394 13379 15656
M60 90 6013 7428 8490 11673 16625 19455
M64 95 46 7233 8935 10212 14041 19998 23402
* In order not over-tighten the fastener, please refer manufacturer's service manual, or
TORQUE DATA for tightening torque information.
* Torque tightening is refer to “thread dimension” of screw, which is M3~M64 size mention
above table.

Torque Conversion
Units to be
Corresponding unit
lbf.in lbf.ft kgf.cm kgf.m cN.m N.m

1 lbf.in 1 0.083 1.152 0.0115 11.3 0.113

1 lbf.ft 12 1 13.83 0.138 135.6 1.356

1 kgf.cm 0.868 0.072 1 0.01 9.807 0.098

1 kgf.m 86.8 7.233 100 1 980.7 9.807

1 cN.m 0.088 0.007 0.102 0.001 1 0.01

1 N.m 8.851 0.738 10.20 0.102 100 1

1 Nm = 0.738 ft.lb. = 8.85 In.lb. = 0.10 Kgf.m = 10.20 Kgf.cm

 Torque Data
Bolts and nuts classes
(SAE threads, triangular shape, high pitch 0.15 coefficient)
1”
1 2 3 4 5 6

N L
F

307A
A 5 8 G9
9
threads per inch T o rq u e T o rq u e T o rq u e T o rq u e
inch Ft· l b Ft· l b N m N m

Coarse Thread Series

1/4 20 32 in-Ibs 76 in-Ibs 107 in-Ibs 126 in-Ibs
5/16 18 66 in-Ibs 157 in-Ibs 221 in-Ibs 259 in-Ibs
3/8 16 10 23 33 38
7/16 14 16 37 52 61
1/2 13 24 57 80 94
9/16 12 35 82 115 135
5/8 11 48 113 159 186
3/4 10 85 200 282 331
7/8 9 136 322 455 533
1 8 204 483 681 799
1-1/4 7 409 840 1363 1597
1-1/2 6 711 1462 2371 2779
Fine Thread Series
1/4 28 37 in-Ibs 87 in-Ibs 123 in-Ibs 144 in-Ibs
5/16 24 73 in-Ibs 174 in-Ibs 245 in-Ibs 287 in-Ibs
3/8 24 11 26 37 43
7/16 20 18 41 58 68
1/2 20 27 64 90 105
9/16 18 39 91 128 151
5/8 18 54 127 180 211
3/4 16 94 223 315 369
7/8 14 150 355 502 588
1 14 229 542 765 896
1-1/4 12 453 930 1509 1768
1-1/2 12 800 1645 2668 3127

* note: Torque-Tension relationship for ASTM A307 Grade A(SAE J2), SAE J429
Grade 5, SAE J429 Grade 8 & FNL Grade 9 Bolts.
* note: Torque values for 1/4" and 5/16" are in inch-pounds. All other torque
values are in foot-pounds.
Hanger No. List
Hanger No.
Hanger No. Suitable Size
(with product)
08782100
Socket Hanger for 1/4" DR. Socket 1/4"DR. Socket
+ KT No. & D1

08783100

Socket Hanger for 3/8" DR. Socket + 3/8"DR. Socket

KT No. & D1

08784100
Socket Hanger for 1/2" DR. Socket 1/2"DR. Socket
+
KT No. & D1

08786100
Socket Hanger for 3/4" DR. Socket 3/4"DR. Socket
+
KT No. & D1

08782102
1/4"DR. Ratchet, sliding
Hanger for 1/4" DR. Accessories
+ T-handle, flexible handle
KT No. & D1

08783102
3/8"DR. Ratchet, sliding
Hanger for 3/8" DR. Accessories
+ T-handle, flexible handle KT No. & D1

08784102
1/2"DR. Ratchet, sliding
Hanger for 1/2" DR. Accessories
+ T-handle, flexible handle
KT No. & D1

8781103 choose suitable hangers

according to different sizes
Hanger for Wrench For example,1060 6~9mm
+ + KT No. & D1

8781100 choose suitable hangers

according to different sizes
For example,1060 10~19mm
Hanger for Wrench & Nut Spinner
+ + & nut spinner
KT No. & D1

8781101 choose suitable hangers

according to different sizes
Hanger for Wrench For example,1060 20~23mm
+ + KT No. & D1

8781102 choose suitable hangers

according to different sizes
Hanger for Wrench For example,1060 24~32mm
+ + KT No. & D1

087837(size)KT
Speed wrench, open-
Hanger for Speed Wrench + side speed wrench size,
8~24mm KT No. & D1

8785100 choose suitable rubber rings

according to different sizes Screwdriver, hex key, spline
L-wrench, star L-wrench,
Hanger for Screwdriver
+ + L-type wrench, T-type KT No. & D1
wrench

8785001
Power driving 9.5mm
Hanger for Power Driving + groove KT No. & D1
 Air supply system :
4 Filter, Regulator, Lubricator

1 Air compressor

3 Air dryer 2
Air tank

Preparation Operation Maintenance

1
3
5 ▪ Lubricate after use
4
2
3232

40
60
5
1 20
2 4
2 4

80
0
psi 90 6
19

0
19

bar 6.2 M A X
2

▪ Oil for
▪ Set the air pressure pneumatic tool
SAE#10

Impact Tool ▪ Store

R F

D R Y

RF

Water
Hand Tool
▪ Drain the water ▪ Select the direction

▪ Handle the air

tool correctly 2 1 0 ▪ Dispose
5 4 3

MAX

1 0
2
3

MAX

▪ Clean the air hose

▪ Adjust the torque

658
Index ......
102506S1..........379 102535S1.B ......379 1061-12 ............292 1071-65 ............293 10A0-46 ............307
10 xxx 102506S1.B ......379 102535T ............379 1061-13 ............292 1071-70 ............293 10A0-50 ............307
1001MR ............130 102506T ............379 102535T.B ........379 1061-14 ............292 1071-75 ............293 10A0-55 ............307
1005GQ ............482 102506T.B ........379 102540T ............379 1061-15 ............292 1071-80 ............293 10A0-60 ............307
1006GPN ..........457 102507H ...........379 102540T.B ........379 1061-16 ............292 1071-85 ............293 10A0-65 ............307
1006PR .............455 102507H.B ........379 102540U ...........379 1061-17 ............292 1080-06 ............317 10A0-70 ............307
1006PRN ..........455 102507S1 .........379 102540U.B .......379 1061-18 ............292 1080-07 ............317 10A0-75 ............307
1009GPN ..........457 102507S1.B ......379 102540V ...........379 1061-19 ............292 1080-08 ............317 10A0-80 ............307
1009PR .............455 102507T ............379 102545S1 .........379 1061-20 ............292 1080-09 ............317 10A0-85 ............307
1009PRN ..........455 102507T.B ........379 102545S1.B ......379 1061-21 ............292 1080-10 ............317 10A0-90 ............307
1010PR .............455 102507U ...........379 102545T ............379 1061-22 ............292 1080-11 ............317 10A0-95 ............307
1011MQ ............384 102507U.B ........379 102545T.B ........379 1061-23 ............292 1080-12 ............317 10A0-A0 ............307
1014GRN ..........457 102508H ...........379 102550T ............379 1061-24 ............292 1080-13 ............317 10A0-A5 ............307
1015GQ ............482 102508H.B ........379 102550T.B ........379 1061-25 ............292 1080-14 ............317 10A0-B0 ............307
1015MQ ............384 102508M ...........379 102555S1 .........379 1061-26 ............292 1080-15 ............317 10A0-B5 ............307
1015PQ ............384 102508S1 .........379 102555S1.B ......379 1061-27 ............292 1080-16 ............317 10A0-C0 ...........307
1020-08 ............306 102508S1.B ......379 102555S2 .........379 1061-28 ............292 1080-17 ............317 10A0-C5 ...........307
1020-09 ............306 102508S2 .........379 102555S2.B ......379 1061-29 ............292 1080-18 ............317 10B0-24 ............307
1020-10 ............306 102508S2.B ......379 102565S1 .........379 1061-30 ............292 1080-19 ............317 10B0-26 ............307
1020-11 ............306 102508T ............379 102565S1.B ......379 1061-32 ............292 1080-20 ............317 10B0-27 ............307
1020-12 ............306 102508T.B ........379 1031-10R ..........303 1063-06 ............295 1080-21 ............317 10B0-30 ............307
1020-13 ............306 102508U ...........379 1031-11R ..........303 1063-08 ............295 1080-22 ............317 10B0-32 ............307
1020-14 ............306 102508U.B ........379 1031-12R ..........303 1063-10 ............295 1080-23 ............317 10B0-36 ............307
1020-15 ............306 102508V ...........379 1031-13R ..........303 1063-11 ............295 1080-24 ............317 10B0-41 ............307
1020-16 ............306 102509T ...........379 1031-14R ..........303 1063-12 ............295 1080-25 ............317 10B0-46 ............307
1020-17 ............306 102509T.B ........379 1031-15R ..........303 1063-13 ............295 1080-26 ............317 10B0-50 ............307
1020-18 ............306 102509U ...........379 1031-16R ..........303 1063-14 ............295 1080-27 ............317 10B0-55 ............307
1020-19 ............306 102509U.B ........379 1031-17R ..........303 1063-15 ............295 1080-28 ............317 10B0-60 ............307
1023EQ ............385 102509V ...........379 1031-18R ..........303 1063-16 ............295 1080-29 ............317 10B0-65 ............307
102500P ...........379 102510H ...........379 1031-19R ..........303 1063-17 ............295 1080-30 ............317 10B0-70 ............307
102500P.B ........379 102510H.B ........379 1031-22R ..........303 1063-18 ............295 1080-32 ............317 10B0-75 ............307
102500R ...........380 102510M ..........379 1031-24R ..........303 1063-19 ............295 1081-06 ............317 10B0-80 ............307
102500R.B ........380 102510T ...........379 1031-26R ..........303 1063-21 ............295 1081-07 ............317 10B0-85 ............307
102501P ...........379 102510T.B ........379 1031-27R ..........303 1063-22 ............295 1081-08 ............317 10B0-90 ............307
102501P.B ........379 102510T-S1 ......381 1031-30R ..........303 1063-27 ............295 1081-09 ............317 10B0-95 ............307
102501R ...........380 102510U ...........379 1031-32R ..........303 1063-30 ............295 1081-10 ............317 10B0-A0 ............307
102501R.B ........380 102510U.B ........379 1032CQ ............387 1063-32 ............295 1081-11 .............317 10B0-A5 ............307
102501Z ...........380 102510V ...........379 1032CQ01 ........387 1067-06 ............295 1081-12 ............317 10B0-B0 ............307
102501Z.B ........380 102512P ...........379 1036ZQ ............482 1067-07 ............295 1081-13 ............317 10B0-B5 ............307
102502P ...........379 102512P.B ........379 1042CQ ............384 1067-08 ............295 1081-14 ............317 10B0-C0 ...........307
102502P.B ........379 102515H ...........379 1043CQ ............385 1067-09 ............295 1081-15 ............317 10C0-24 ............307
102502P-S1 ......381 102515H.B .......379 1044CQ ............385 1067-10 ............295 1081-16 ............317 10C0-27 ............307
102502H ...........379 102515T ...........379 1050CQ ............387 1067-11 ............295 1081-17 ............317 10C0-30 ............307
102502H.B ........379 102515T.B ........379 1060-06 ............293 1067-12 ............295 1081-18 ............317 10C0-32 ............307
102502R ...........380 102515T-S1 ......381 1060-07 ............293 1067-13 ............295 1081-19 ............317 10C0-36 ............307
102502R.B ........380 102515U ...........379 1060-08 ............293 1067-14 ............295 1081-20 ............317 10C0-41 ............307
102502Z ...........380 102515U.B ........379 1060-09 ............293 1067-15 ............295 1081-21 ............317 10C0-46 ............307
102502Z.B ........380 102515V ...........379 1060-10 ............293 1067-16 ............295 1081-22 ............317 10C0-50 ............307
102502Z-S1 ......381 102520T ...........379 1060-11 ............293 1067-17 ............295 1081-23 ............317 10C0-55 ............307
102503H ...........379 102520T.B ........379 1060-12 ............293 1067-18 ............295 1081-24 ............317 10C0-60 ............307
102503H.B ........379 102520T-S1 ......381 1060-13 ............293 1067-19 ............295 1081-25 ............317 10C0-65 ............307
102503P ...........379 102520U ...........379 1060-14 ............293 1067-20 ............295 1081-26 ............317 10D0-08 ............296
102503P.B ........379 102520U.B ........379 1060-15 ............293 1067-21 ............295 1081-27 ............317 10D0-09 ............296
102503R ...........380 102520V ...........379 1060-16 ............293 1067-22 ............295 1081-28 ............317 10D0-10 ............296
102503R.B ........380 102520V ...........579 1060-17 ............293 1067-23 ............295 1081-29 ............317 10D0-11 ............296
102503S1 .........379 102525H ...........379 1060-18 ............293 1067-24 ............295 1081-30 ............317 10D0-12 ............296
102503S1.B ......379 102525H.B ........379 1060-19 ............293 1067-25 ............295 1081-32 ............317 10D0-13 ............296
102503Z ...........380 102525T ...........379 1060-20 ............293 1067-26 ............295 1084-08 ............318 10D0-14 ............296
102503Z.B ........380 102525T.B ........379 1060-21 ............293 1067-27 ............295 1084-09 ............318 10D0-15 ............296
102504H ...........379 102525T-S1 ......381 1060-22 ............293 1067-28 ............295 1084-10 ............318 10D0-16 ............296
102504H.B ........379 102525U ...........379 1060-23 ............293 1067-29 ............295 1084-11 ............318 10D0-17 ............296
102504M ...........379 102525U.B ........379 1060-24 ............293 1067-30 ............295 1084-12 ............318 10D0-18 ............296
102504P ...........379 102525V ...........379 1060-25 ............293 1067-32 ............295 1084-13 ...........318 10D0-19 ............296
102504P.B ........379 102525V ...........579 1060-26 ............293 1071-33 ............293 1084-14 ............318 10F0-17P ..........297
102504S1..........379 102527T ...........379 1060-27 ............293 1071-34 ............293 1084-15 ............318 10F0-19P ..........297
102504S1.B ......379 102527T.B ........379 1060-28 ............293 1071-35 ............293 1084-16 ............318 10F0-21P ..........297
102504S2 .........379 102527U ...........379 1060-29 ............293 1071-36 ............293 1084-17 ............318 10F0-22P ..........297
102504S2.B ......379 102527U.B ........379 1060-30 ............293 1071-38 ............293 1084-18 ............318 10F0-23P ..........297
102505H ...........379 102527V ...........379 1060-32 ............293 1071-41 ............293 1084-19 ............318 10F0-24P ..........297
102505H.B ........379 102530T ...........379 1060-55 ............293 1071-42 ............293 1090PR1 ...........456 10F0-26P ..........297
102505M ..........379 102530T.B ........379 1061-06 ............292 1071-44 ............293 10A0-24 ............307 10F0-27P ..........297
102505S1 .........379 102530T-S1 ......381 1061-07 ............292 1071-46 ............293 10A0-27 ............307 10F0-29P ..........297
102505S1.B ......379 102530U ...........379 1061-08 ............292 1071-48 ............293 10A0-30 ............307 10F0-30P ..........297
102506H ...........379 102530U.B ........379 1061-09 ............292 1071-50 ............293 10A0-32 ............307 10F0-32P ..........297
102506H.B ........379 102530V ...........379 1061-10 ............292 1071-55 ............293 10A0-36 ............307 10F0-36P ..........297
102506M ...........379 102535S1 .........379 1061-11 ............292 1071-60 ............293 10A0-41 ............307 10F0-38P ..........297

Index 1
 Index ......
10F0-41P ..........297 112612MR ........398 114725R ...........401 116340R ...........404 1214SR .............294 1360022Z .........380
10F0-46P ..........297 112710R ...........401 114727R ...........401 116345R ...........404 1214SR01 .........294 1360023P .........380
10F0-50P ..........297 112715R ...........401 114730R ...........401 116350R ...........404 1215MR ............294 1360023Z .........380
10F0-55P ..........297 112720R ...........401 114740R ...........401 1163A05R .........408 1215MR01 ........294 1360451P .........380
10F0-60P ..........297 112725R ...........401 114745R ...........401 1163A06R .........408 1215MR02 ........294 1360451Z .........380
10F0-65P ..........297 112727R ...........401 114750R ...........401 1163A07R .........408 1215MRN01 .....294 1360552P .........380
10F0-70P ..........297 112730R ...........401 115002MR ........406 1163A08R .........408 1215MRN02 .....294 1360552Z .........380
10F0-75P ..........297 112740R ...........401 115003MR ........406 1163A09R ........408 12916MQ1 .......484 1360703P .........380
11 xxx 112745R ...........401 115004MR ........406 1163A10R .........408 1216SR ............294 1360703Z .........380
112750R ...........401 115005MR ........406 1163A15R .........408 1218MR01 ........294 136501P ...........391
1106MR ............298
113002MR ........399 115006MR ........406 1163A20R .........408 1218MRN .........294 136502P ...........391
1108MR ............298
113002SR .........399 115008MR ........406 116502MR ........404 12207MRN .......312 136503P ...........391
1108SR .............298
113003MR ........399 115010MR ........406 116503MR ........404 12207MRN01 ...312 13A6502P .........391
11101SQ ...........395
113003SR .........399 115025MR .......406 116504MR ........404 12207SRN ......312 13B6502P .........391
11104PR ...........457
11104PR10 .......457
113004MR ........399 11509SQ05 ……458 116505MR ........404 12212MRN .......312 14 xxx
113004SR .........399 11527SQ05 …...458 116506MR ........404 12214MRN .......312
1110MR .............298 1406PR .............304
113005MR ........399 115310R ...........406 116507MR ........404 1224CRN ..........294
1110SR .............298 14103GP ...........510
113005SR .........399 115315R ...........406 116508MR ........404 1226MR …........294
1112MR .............298 14108SRN ........316
113006MR ........399 115320R ...........406 116510MR ........404 1226MRN .........294
1112MRN ..........298 14111MRN ........316
113006SR .........399 115325R ...........406 116525MR ........404 1266MR ............296
1112SR .............298 14110003 ..........364
113007SR .........399 115327R ...........406 118406M ...........323 12706MR ..........315
111946 ..............308 14110104 ..........364
113008MR ........399 115330R ...........406 118407M ...........323 12709MRN .......315
112002MR ........399 14110204 ..........364
113008SR .........399 115340R ...........406 118408M ...........323 1271MR ............296
112003MR ........399 14110204-E* .....364
113010MR ........399 115345R ...........406 118409M ...........323 1271MRN .........296
112004MR ........399 14110205-E* .....364
113010SR .........399 115350R ...........406 118410M ...........323 1272MR ............296
112005MR ........399 14110206 ..........364
113012SR .........399 1153A05R .........408 118411M ...........323 1272MR01 ........296
112006MR ........399 14110206-E* .....364
113015MR ........399 1153A06R .........408 118412M ..........323 1275MR ............296
112007MR ........399 14110208-E* .....364
113025MR ........399 1153A07R .........408 118413M ...........323 1275MRN .........296
112008MR ........399 14110214 ..........364
113025SR .........399 1153A08R .........408 118414M ...........323 12807MR .........315
112010MR ........399 14110306 ..........364
113086 ..............308 1153A09R .........408 118417M ...........323 1282MR ............296
112015MR ........399 14110308 ..........364
11311MQ ..........483 1153A10R .........408 118508M ...........323 12939MQ1 ........484
112025MR ........399 14120303 ..........364
11409SQ05 …...458 1153A15R .........408 118509M ...........323 12939SQ1 ........484
11205SQ ...........476 14120404 ..........364
11409SQ08 .......458 1153A20R .........408 118510M ...........323 1296MRN .........294
11208SQ ...........476 14120806 ..........364
11427SQ05 .......458 115502MR ........406 118511M ...........323 12A0MRN ........292
11225SQ ...........476 14120808 ..........364
11427SQ08 .......458 115503MR ........406 118512M ...........323 12A1MRN .........292
112261 ..............308 14125504 ..........364
114310R ...........401 115503SR ........406 118513M ...........323 12A3MRN .........292
112310R ...........401 14126504 ..........364
114315R ...........401 115504MR ........406 118514M ...........323 12A4MRN .........292
112315R ...........401 14126504-E* .....364
114320R ...........401 115504SR ........406 118517M ...........323 12B4MRN .........292
112320R ...........401 14126506 .........364
114325R ...........401 115505MR ........406 118519M ...........323 12C7MRN .........292
112325R ...........401 14126506-E* ....364
114327R ...........401 115505SR ........406 119502M ...........407 12C8MRN .........292
112327R ...........401 14126514 .........364
112330R ...........401
114330R ...........401 115506MR ........406 119503M ...........407 13 xxx 14210023 .........366
114340R ...........401 115506SR ........406 119504M ...........407
112340R ...........401 13012MR ..........310 14210104 .........366
114345R ...........401 115508MR ........406 119505M ...........407
112345R ...........401 13013MR ..........310 14210112 .........366
114350R ...........401 115508SR ........406 119506M ...........407
112350R ...........401 1306CR ............305 14210116 .........366
114502MR ........396 115510MR ........406 119508M ...........407
112502MR ........396 1306MR ............305 14210132 .........366
114502SR .........396 115510SR ........406 119510M ...........407
112502SR .........396 1306MRN .........305 14210204 ........366
114503SR .........396 115512SR ........406 119525M ...........407
112503MR ........396 1306SR .............305 14210206 .........366
114504SR .........396 115525MR ........406 11A310R ...........406
112503SR .........396 131101P ...........391 14210212 .........366
114505SR .........396 115525SR .........406 11A315R ...........406
112504MR ........396 131102P ...........391 14210214 .........366
114506SR .........396 115H05M-10 .....323 11A320R ...........406
112504SR .........396 131103P ...........391 14210216 .........366
114508SR .........396 115H06M-10 .....323 11A325R ...........406
112505MR ........396 13113MR ..........312 14210306 .........366
114510SR .........396 115H07M-10 .....323 11A327R ...........406
112505SR .........396 131501P ...........391 14220303 .........366
114512SR .........396 115H08M-10 .....323 11A330R ...........406
112506MR ........396 131502P ...........391 14220404 .........366
114516SR .........396 115H08M-14 .....323 11A340R ...........406
112506SR .........396 131503P ...........391 14220503 .........366
112507MR ........396
114518SR .........396 115H09M-10 .....323 12 xxx 1317012PN .......374 14220504 .........366
114520SR .........396 115H10M-10 .....323
112508MR ........396 1207MR ............294 1317012ZN .......374 14220512 .........366
114524SR .........396 115H10M-14 .....323
112508SR .........396 1207SR ............294 1317046SN .......374 14220516 .........366
114525SR .........396 115H11M-10 .....323
112510MR ........396 1208MR ............294 1317057SN .......374 14220806 .........366
114503MR ........396 115H12M-10 .....323
112510SR .........396 1210MR ............294 1317115TN .......374 14220807 .........366
114504MR ........396 115H13M-10 .....323
112512MR ........396 12107MRN .......312 1317225TN .......374 14220808 .........366
114505MR ........396 115H13M-14 .....323
112512SR .........396 12107MRN01 ...312 1317340TN .......374 14221008 .........366
114506MR ........396 116002MR ........404
112514MR ........396 1211MR ............294 1317401PN .......374 14225503 .........366
114507MR ........396 116003MR ........404
112515MR ........396 1211MRN ..........294 131744BHN ......374 14225504 .........366
114508MR ........396 116004MR ........404
112516SR .........396 1211SR .............294 1317501ZN .......374 14225505 ........366
114510MR ........396 116005MR ........404
112517MR ........396 1211SR01 .........294 131755BHN ......374 14225506 .........366
114515MR ........396 116006MR ........404
112518SR .........396 1211SR02 .........294 1317602PN .......374 14226504 .........366
114525MR ........396 116007MR ........404
112519MR ........396 12112MRN ........312 131766BHN ......374 14226506 .........366
114555MR ........396 116008MR ........404
112522MR ........396 12114MRN ........312 1317702ZN .......374 14226512 .........366
114605MR ........398 116010MR ........404
112525MR ........396 1212MR ............294 13213MR ..........312 14226514 .........366
114606MR ........398 116025MR ........404
112525SR .........396 1213SRN …...…294 134501P ...........391 14226516 ........366
114608MR ........398 116310R ...........404
112576 ..............308 1214MR ............294 134502P ...........391 14230602 .........367
114610MR ........398 116315R ...........404
112605MR ........398 1214MR01 ........294 134503P ...........391 14230702 .........367
114612MR ........398 116320R ...........404
112606MR ........398 1214MRN01 .....294 1360012P .........380 14230803 .........367
114710R ...........401 116325R ...........404
112608MR ........398 1214MRN05 .....294 1360012Z .........380 14230903 .........367
114715R ...........401 116327R ...........404
112610MR ........398 1214SRN01 ......294 1360022P .........380 14231003 .........367
114720R ...........401 116330R ...........404

Index 2
Index ......
14231503 .........367 1450-09 ............378 15661612 ..........585 168006M ...........383 183207H ...........380 19001618 ..........297
14231510 .........367 1450-10 ............378 15661615 ..........325 168007H ...........382 183208H ...........380 19001719 ..........297
14232004 .........367 1450-11 ............378 15661615 ..........585 168008H ...........382 183210H ...........380 19001819 ..........297
14232010 .........367 1450-12 ............378 15661618 ..........325 168008M ...........383 183212H ...........380 19001921 ..........297
14232504 .........367 1450-13 ............378 15661618 ..........585 168009H ...........382 183215T ............382 19001922 ..........297
14232510 .........367 1450-45 ............378 15661818 ..........325 168009M ...........383 183220T ............382 19002022 ..........297
14232704 .........367 1450-55 ............378 15661818 ..........585 168010E ...........383 183225T ............382 19002123 ..........297
14233005 .........367 1453-05 ............378 15662112 ..........325 168010H ...........382 183227T ............382 19002224 ..........297
14233010 .........367 1453-05 ............561 15662112 ..........585 168010M ...........383 183230T ............382 19002326 ..........297
14234006 .........367 1453-06 ............378 15662115 ..........325 168010T ............382 183240T ............382 19002426 ..........297
14240105 .........367 1453-06 ............561 15662115 ..........585 168010U ...........383 183245T ............382 19002427 ..........297
14240204 .........367 1453-07 ............378 15662118 ..........325 168012H ...........382 183250T ............382 19002430 ..........297
14240206 .........367 1453-07 ............561 15662118 ..........585 168012M ...........383 183601P ...........380 19002528 ..........297
14270803 .........367 1453-08 ............378 157501P ...........391 168014M ...........383 183602P ...........380 19002632 ..........297
14270903 .........367 1453-08 ............561 157502P ...........391 168015E ...........383 183602Z ...........382 19002729 ..........297
14271003 .........367 1453-10 ............378 157503P ...........391 168015T ............382 183603P ...........380 19002730 ..........297
14271503 .........367 1453-10 ............561 1586-09 ............579 168015U ...........383 183603Z ...........382 19002732 ..........297
14272004 .........367 14610103 .........372 158902ERA.......390 168020E ...........383 183604H ...........380 19003032 ..........297
14272504 .........367 14610204 .........372 1596-09 ............579 168020T ............382 183604P ...........380 19003036 ..........297
14272704 .........367 14610206 .........372 16 xxx 168020U ...........383 183604Z ...........382 19003236 ..........297
14273005 .........367 14610306 .........372 168025E ...........383 183605H ...........380 19003436 ..........297
1606MR ............299
14274006 .........367 14620806 .........372 168025T ............382 183606H ...........380 19004146 ..........297
1609MR ............299
14280023 .........367 14620807 .........372 168025U ...........383 183607H ...........380 19005507 ..........297
1626MR ............299
14280104 .........367 14621008 ..........372 168027E ...........383 183608H ...........380 19100607 ..........306
163604H ...........382
14280132 .........367 14621210 ..........372 168027T ............382 183608S ...........380 19100809 ..........306
163605H ...........382
14280204 .........367 14625504 ..........372 168027U ...........383 183609S ...........380 19100810 ..........306
163605M ...........383
14280306 .........367 14626504 ..........372 168030E ...........383 183610H ...........380 19101011 ..........306
163606H ...........382
14311003 ..........415 14626506 ..........372 168030T ............382 183610S ...........380 19101012 ..........306
163606M ...........383
14311015 ..........415 14710003 ..........376 168030U ...........383 183611S ...........380 19101213 ..........306
163607H ...........382
14311103 ..........415 14710104 ..........376 168040E ...........383 183612H ...........380 19101214 ..........306
163608H ...........382
14311115 ..........415 14710204 ..........376 168040T ............382 183612S ...........380 19101415 ..........306
163608M ...........383
14312003 ..........415 14710306 ..........376 168040U ...........383 183614H ...........380 19101417 ..........306
163609H ...........382
14312015 ..........415 14720303 ..........376 168045E ...........383 183614S ...........380 19101617 ..........306
163609M ...........382
14313003 ..........415 14720404 ..........376 168045T ............382 183620T ……….382 19101719 ..........306
163610E ...........383
14313015 ..........415 14720807 ..........376 168045U ...........383 183625T ……….382 19101819 ..........306
163610H ...........382
14320615 ..........415 14725505 ..........376 168050E ...........383 183627T ….……382 19101921 ..........306
163610M ...........383
14320815 ..........415 14726506 ..........376 168050T ............382 183630T ……….382 19102022 ..........306
163610T ............382
14321003 ..........415 14740105 ..........376 168050U ...........383 183635T ……….382 19102123 ..........306
163610U ...........383
14321015 ..........415 14740206 ..........376 168055E ...........383 183640T ……….382 19102427 ..........306
163612H ...........382
14321503 ..........415 14780003 ..........376 168055T ............382 183645T ……….382 1912MR ............318
163612M ...........383
14321515 ..........415 14780104 ..........376 168055U ...........383 183650T ……….382 1912MRN .........318
163614M ...........383
14321803 ..........415 14780204 ..........376 168060E ...........383 183655T ……….382 19200608 ..........304
163615E ...........383
14321815 ..........415 14780306 ..........376 168060T ...........382 183660T ……….382 19200711 ..........304
163615T ............382
14322003 ..........415 14810103 ..........370 168060U ...........383 1839MR …....….319 19201012 ..........304
163615U ...........383
14322015 ..........415 14810204 ..........370
163620E ...........383 17 xxx 1842MR …....….319 19201418 ..........304
14322503 ..........415 14810204-E* .....370 187015T ............382 19201622 ..........304
163620T ............382 1706MR ............300
14322515 ..........415 14810205 ..........370 187020T ............382 19202024 ..........304
163620U ...........383 1707SR ............300
14323003 ..........415 14810205-E* .....370 187025T ............382 1926MR ............318
163625E ...........383 1708MR ............300
14323015 ..........415 14810306 ..........370 187027T ............382 19300810 ..........304
163625T ............382 1708MR01 ........300
14323503 ..........415 14810412 ..........370 187030T ............382 19300911 ..........304
163625U ...........383 1710MR ............300
14323515 ..........415 14825503 ..........370 187040T ............382 19301011 ..........304
163627E ...........383 1712MR ............300
14324003 ..........415 14826504 ..........370 187045T ............382 19301012 ..........304
163627T ............382 1712MRN .........300
14324015 ..........415 14826504-E* .....370 187050T ............382 19301113 ..........304
163627U ...........383 174010H ...........237
14330403 ..........415 14826505-E* .....370 188002P ...........380 19301213 ..........304
163630E ...........383 174010H ...........252
14330415 ..........415 14826506 ..........370 188003P ...........380 19301214 ..........304
163630T ............382 174012H ...........237
14330503 ..........415 14820806 ..........370 188004P ...........380 19301417 ..........304
163630U ...........383 174012H ...........252
14330515 ..........415 14821012 ..........370 188008S ...........380 19301719 ..........304
163640E ...........383 174014H ...........237
14330603 ..........415 15 xxx 163640T ............382 174014H ...........252
188010S ...........380 19301922 ..........304
14330615 ..........415 188012S ...........380 19312224 ..........305
151001P ...........391 163640U ...........383 174017H ...........237
14330703 ..........415
151002P ...........391 163645E ...........383 174017H ...........252 19 xxx 19312427 ..........305
14330715 ..........415 19313032 ..........305
151003P ...........391 163645T ............382 174019H ...........237 19000607 ..........297
14330803 ..........415 19500810 .........302
151501P ...........391 163645U ...........383 174019H ...........252 19000708 ..........297
14330815 ..........415 19501012 ..........302
151502P ...........391 163650E ...........383 174022H ...........237 19000809 ..........297
14330902 ..........415 19501113 ..........302
151503P ...........391 163650T ............382 174022H ...........252 19000810 ..........297
14330903 ..........415 19501214 ..........302
14331002 ..........415
155001P ...........391 163650U ...........383 18 xxx 19000911 ..........297
19501315 ..........302
155002P ...........391 163655E ...........383 19001011 ..........297
14331003 ..........415 1805MR ............318 19501417 ..........302
155003P ...........391 163655T ............382 19001012 ..........297
14331502 ..........415 1808MR ............318 19501618 ..........302
15631612 ..........325 163655U ...........383 19001113 ..........297
14331503 ..........415 1812MR ............318 19501719 ..........302
15631615 ..........325 163660E ...........383 19001213 ..........297
14332002 ..........415 181202P ...........380 19501922 ..........302
15631618 ..........325 163660T ............382 19001214 ..........297
14332003 ..........415 181203P ...........380 19510810 ..........303
15631818 ..........325 163660U ...........383 19001314 ..........297
1450-04 ............378 1826MR ............318 19511011 ..........303
15632112 ..........325 168004H ...........382 19001317 ..........297
1450-05 ............378 183203H ...........380 19511012 ..........303
15632115 ..........325 168005H ...........382 19001415 ..........297
1450-06 ............378 183204H ...........380 19511113 ..........303
15632118 ..........325 168005M ...........383 19001417 ..........297
1450-07 ............378 183205H ...........380 19511214 ..........303
15661612 ..........325 168006H ...........382 19001617 ..........297
1450-08 ............378 183206H ...........380 19511416 ..........303

Index 3
 Index ......
19511517 ..........303 19992432 ..........322 20109MR ..........400 203340 ..............126 223005M ………124 233014S ...........123
19511719 ..........303 19992730 ..........322 20110MR……....400 203503 ..............126 223006M ………124 233015S ...........123
19511922 ..........303 19992732 ..........322 201101X ............125 203504 ..............126 223007M ……...124 233016S ...........123
195404R .........252 19992733 ..........322 201102X ............125 203505 ..............126 223008M ……..124 233045M ..........123
195419H ...........252 19992833 ..........322 201103X ............125 203506 ..............126 223009M ……..124 233055M ..........123
195419H ...........259 19993032 ..........322 201104X ............125 203507 ..............126 223010M ………124 23308PR ...........408
195422H ...........252 19993233 ..........322 201208X ...........125 203508 ..............126 223011M ………124 233504M ...........123
195422H ...........259 19993238 ..........322 201235X ...........125 203510 ..............126 223012M ………124 233505M ...........123
195424H ...........252 19993821 ..........322 201255X ...........125 203708 ..............126 223013M ………124 233505S ...........123
195424H ...........259 19993822 ..........322 20129SR ...........400 203709 ..............126 223014M ………124 233506M ..........123
195427H ...........252 19994121L ........322 201308X ...........125 203710 ..............126 223045M ………124 233506S ...........123
195427H ...........259 19A00607 .........308 201309X ...........125 203715 ..............126 223055M ………124 233507M ..........123
195430H ...........252 19A00809 .........308 201310X ...........125 203720 ..............126 22319PR ...........405 233507S ...........123
195430H ...........259 19A01011 .........308 201315X ...........125 203725 ..............126 223504M ...........124 233508M ..........123
195432H ...........252 19A01213 .........308 201320X ...........125 203727 ..............126 223505M ...........124 233508S ...........123
195432H ...........259 19A01415 .........308 201325X ...........125 203730 ..............126 223505S ...........124 233509M ..........123
19600607 ..........298 19A01617 .........308 201327X ...........125 203740 ..............126 223506M ...........124 233509S ...........123
19600809 ..........298 19A01819 .........308 201330X ...........125 20407PR ...........402 223506S ...........124 233510M ..........123
19600810 ..........298 19A02022 .........308 201340X ...........125 20409PR ...........402 223507M ..........124 233510S ...........123
19601011 ..........298 19A02123 .........308 201503MX ........125 20419PR ...........402 223507S ...........124 233511M ..........123
19601012 ..........298 19A02426 .........308 201504MX .......125 2044SRV ….…..140 223508M ..........124 233511S ...........123
19601113 ..........298 19A02528 .........308 201504SX ........125 2048MRV ….…..140 223508S ...........124 233512M ..........123
19601213 ..........298 19A02729 .........308 201505MX ........125 20505PR01 .......398 223509M ..........124 233512S ...........123
19601214 ..........298 19A03032 .........308 201506MX ........125 20515PR01 .......398 223509S ...........124 233513M ..........123
19601415 ..........298 19A0-09 ............308 201506SX ........125 20A16MR ..........403 223510M ..........124 233514M ..........123
19601417 ..........298 19A0-15 ............308 201507SX .........125 20A17MR ..........403 223510S ...........124 233514S ...........123
19601617 ..........298 19B00810 .........301 201508MX ........125 21 xxx 223511M ..........124 233515M ...........123
19601719 ..........298 19B00810 .........585 201508SX ........125 223511S ...........124 233515S ...........123
2104PR .............134
19601819 ..........298 19B01011 ..........301 201510MX ........125 223512M ..........124 233516S ...........123
2107PR .............133
19601921 ..........298 19B01011 ..........585 201510SX ........125 223512S ...........124 233518S ...........123
2109PR .............133
19602022 ..........298 19B01012 ........301 201512SX ........125 223513M ..........124 233532M ...........123
21108MR ..........407
19602224 ..........298 19B01012 ........585 201801X ...........126 223514M ..........124 233545M ..........123
2113PR ............134
19602326 ..........298 19B01113 ..........301 201802X ...........126 223514S ...........124 233555M ..........123
2119PR .............133
19602427 ..........298 19B01113 ..........585 201803X ...........126 223515M ...........124 237504M ...........125
21-20-07MR ......464
19602732 ..........298 19B01214 .........301 201804X ...........126 223516S ...........124 237505M ...........125
21-20-101 .........464
19603032 ..........298 19B01214 .........585 2019MR ............136 223518S ...........124 237506M ...........125
21-20-102 .........464
19610809 ..........299 19B01315 .........301 2019SR .............136 223545M ...........124 237507M ...........125
21208MR ..........407
19611011 ..........299 19B01315 .........585 20208MR ..........397 223555M ...........124 237508M ...........125
21208SR ..........407
19611213 ..........299 19B01417 .........301 20208MR01 ......397
2121-12 ............631
227504M ...........124 24 xxx
19611415 ..........299 19B01417 .........585 20208SR01 .......397 227505M ...........124
2121-18 ............631 24110204 ..........364
19611617 ..........299 19B01618 .........301 20209MR ..........397 227506M ...........124
2124-18 ............632 24110214 ..........364
19611819 ..........299 19B01618 .........585 20209SR02 .......397 227507M ...........124
2126-18 ............632 24308PR ...........408
19700607 ..........300 19B01719 .........301 2021MR ............136 227508M ...........124
2127PR .............133 24311030 ..........416
19700809 ..........300 19B01719 .........585 20210MR ..........397 2293-02 ............131
2128-26 ............632 24311140 ..........416
19700810 ..........300 19B01921 .........301 20218MR ..........397 2293-03 ............131
2128PR .............390 24312020 ..........416
19701011 ..........300 19B01921 .........585 20219MR ..........397 2293-04 ............131
2129-24 ............632 24330610 ..........416
19701012 ..........300 19B02224 .........301 20219SR ..........397 2293-06 ............131
21-30-09MR ......464 24330715 ..........416
19701113 ..........300 19B02224 .........585 2025MRE01 .….137
21309PR ...........407 23 xxx 24330820 ..........416
19701213 ..........300 19C00607 .........301 2030CR ............138
213312DF .........132 231008M ..........124 24330915 ..........416
19701214 ..........300 19C00809 .........301 20306PR ...........403
2138PR .............390 231010M ..........124 2452-05F ..........132
19701314 ..........300 19C01011 .........301 20307PR ...........402
2141 ..................133 231010S ...........124 2452DK ............132
19701415 ..........300 19C01213 .........301 20308PR ...........402
2142 ..................133 231012S ...........124 2453-05F ......132
19701417 .........300 19C01415 .........301 20309PR ...........402
19701617 ..........300 19C01617 .........301 2031MR ............139
2166DF ............386 2311-06 ............132 25 xxx
2177DF .............132 2311-12 .............132
19701719 ..........300 19C01819 .........301 203101 ..............126 2501MR ............130
2178AE .............132 2311-18 ............132
19701819 ..........300 19C02022 .........301 203102 ..............126 2509MR ............133
2178DF .............132 2312-06 ……….132
19701921 ..........300 19C02123 .........301 203103 ..............126 2509SR .............133
2178TG ………..132 233004M ...........123
19701922 ..........300 19C02426 .........301 203104 ..............126 2510SR .............134
21A107 .............326 233005M ...........123
19702022 ..........300 19C02528 .........301 20317MR ..........403 2511MR ............134
19702123 ..........300 19C03032 .........301 20318PR ...........402 22 xxx 233005S ...........123
2515MR ............130
233006M ..........123
19702224 ..........300 1A xxx 20319PR ...........402 22106MR ..........405
233006S ...........123
2516MR ............135
19702326 ..........300 203204 ..............126 22108MR ..........405 2516SR .............135
1A06MR ............306 233007M ..........123
19702426 ..........300 203207 ..............126 22118MR ..........405 2517MR ............387
19702427 ..........300 1B xxx 203208 ..............126 22208MR ..........405
233007S ...........123
2518MR ............135
233008M ...........123
19702528 ..........300 1B06MR ............306 203210 ..............126 22218MR ..........405 2518MR01 ........135
233008S ...........123
19703032 ..........300 1C xxx 203235 ..............126 2221-02 ............131
233009M ...........123
2518SR .............135
199104R ...........321 203255 ..............126 2221-03 ............131 2519MR ............136
1C08MR ...........301 233009S ...........123
19911722 ..........321 203265 ..............126 2221-04 ............131 2519SR .............136
1C12MR ...........301 233010M ..........123
199306R ..........321 203308 ..............126 2221-06 ............131 2521MR ............136
19932433 .........321 1F xxx 203309 ..............126 2221-10 ............131
233010S ...........123
2525MRE ..........137
233011M ...........123
19932427 ..........321 1F06MRN .........302 203310 ..............126 2221-12 ............131 2526CR ............138
233011S ............123
19961721 ..........322 20 xxx 203315 ..............126 2223-02 ............131
233012M ...........123
2526MR ............137
19991921 ..........322 203320 ..............126 2223-04 ............131 2526SR .............137
20107MR01 ......400 233012S ...........123
199920R ...........322 203325 ..............126 22306PR ...........405 2530CR ............138
20107SR ...........400 233013M ..........123
19992224 ..........322 203327 ..............126 22309PR ...........405 2531MR ............139
20108MR ..........400 233014M ..........123
19992427 ..........322 203330 ..............126 223004M ………124 253504M ...........226

Index 4
Index ......
253505M ...........226 3020SR ............159 305101 ..............227 314810M ..........155 323022S ...........144 33122 ..............505
253506M ...........226 3020SR02 .........159 305102 ..............227 3149PR8 ..........157 323024M ...........144 333006M ...........143
253507M ...........226 302102 ..............150 305103 ..............227 31512MR ..........373 323024S ...........144 333007M ...........143
253508M ...........226 302103 ..............150 305104 ..............227 31512MR01 ......373 323026S ...........144 333008M ...........143
253509M ...........226 302104 .............150 305208 ..............227 31512MR-A .......373 323028S ...........144 333008S ...........143
253510M ...........226 302205 ..............150 305210 ..............227 31512MR01-A ...373 323030S ...........144 333009M ..........143
253511M ...........226 302208 ..............150 305255 ..............227 31512MR-D ......373 323032S ...........144 333010M ...........143
253512M ...........226 302210 ..............150 305310 ..............228 31512MR01-D ..373 32309PR ...........417 333010S ...........143
253513M ...........226 302308 ..............150 305315 ..............228 31516MR ..........373 323507M ...........144 333011M ...........143
253514M ...........226 302309 ..............150 305320 ..............228 31516MR-A .......373 323508M ...........144 333011S ...........143
253545M ...........226 302310 ..............150 305325 ..............228 31516MR-D ......373 323508S ...........144 333012M ..........143
253555M ...........226 302315 ..............150 305327 ..............228 31519MR ..........373 323509M ...........144 333012S ...........143
2539MR ............139 302320 ..............150 305330 ..............228 31519MR-A .......373 323510M ...........144 333013M ..........143
2540MR ............139 302325 ..............150 305340 ..............228 31519MR-D ......373 323510S ...........144 333014M ..........143
2544SRV ………140 302327 ..............150 305345 ..............228 32 xxx 323511M ...........144 333014S ...........143
2548MRV ……...140 302330 ..............150 305350 ..............228 323512M ...........144 333015M ..........143
3203 ..................320
2550MRV ……...141 302340 ..............150 305355 ..............228 323512S ...........144 333015S ...........143
3203 ..................564
2551MR ............142 302345 ..............150 305360 ..............228 323513M ...........144 333016M ...........143
320300 ..............320
2551MR01 ........142 302350 ..............150 305504M ...........227 323514M ...........144 333016S ...........143
320300 ..............564
2553MRV ……...141 3023MR ............159 305505M ...........227 323514S ...........144 333017M ...........143
320301 ..............320
2555MR ............386 3023MR04 ........159 305504S …...….228 323515M ...........144 333018M ...........143
320301 ..............564
2565MRV ..........141 3024MR ............160 305505S ...........228 323516M ...........144 333018S ...........143
3203A0 .............320
2571-45 ............133 3024SR .............160 305506M ...........227 323516S ...........144 333019M ...........143
3203A0 .............564
2575MR ............142 302503 ..............150 305506S ...........228 323517M ..........144 333019S ...........143
3204 ..................320
27 xxx 302504 ..............150 305507M ...........227
3204 ..................565
323518M ...........144 333020M ...........143
302505 ..............150 305507S ...........228 323518S ...........144 333020S ...........143
2725-55F ..........127 320540 ..............566
302506 ..............150 305508M ..........227 323519M ..........144 333021M ...........143
2725-55G .........127 320560 ..............566
302507 ..............150 305508S ...........228 323520S ...........144 333022M ...........143
2725DK .............127 320600 .............320
302508 ..............150 305510M ...........227 323521M ..........144 333022S ...........143
2745 ..................131 320600 .............565
302509 ..............150 305510S ...........228 323522M ..........144 333023M ...........143
2752-06G ..........127 320670 .............320
302510 ..............150 305512M ..........227 323522S ...........144 333024M ...........143
2752DK .............127 320670 .............565
302512 ..............150 305512S ...........228 323524M ..........144 333024S ...........143
2752-45G ..........127 320760 .............565
302708 ..............150 305514M ..........227 323524S ...........144 333026S ...........143
2755-55G ..........127 32108MR ..........417
302709 ..............150 305516M ..........227 323526S ...........144 333028S ...........143
2755DK .............127 32118MR ..........417
302710 ..............150 305516S ...........228 323528S ...........144 333030S ...........143
2756-55G .......127 3214-35 ............468
302715 ..............150 305517M ..........227 323530S ...........144 333032S ...........143
2756DK ............127 3214-60 ............468
302720 ..............150 305545S ...........228 323532S ...........144 33311-020 .........489
2760-04 ............129 321510M ...........145
302725 ..............150 30605MR ..........377 32518MR ..........375 33311-021 .........489
2760DK ............129 321510M ...........584
302727 ..............150 30607MR ..........377 32518MR01 ......375 333506M ...........143
2761-55F ..........128 321512M ...........145
302730 ..............150 30607MR02 ......377 32518MR02 ......375 333507M ...........143
2761-55P .........128 321512M ...........584
302740 ..............150 30615MR ..........377 3260-03 ............228 333508M ...........143
2761DK ............128 32209MR ..........417
302745 ..............150 30617MR ..........377 3260-03P ..........228 333508S ...........143
2765-04G .........129 3221-03 ............153
302750 ..............150 306504M ...........228 3260-04 ............228 333509M ...........143
2765DK ............129 3221-06 ............153
3027MR ............161 306505M ...........228 3260-04P ..........228 333510M ...........143
276A-04G .........129 3221-10 ............153
3027SR .............161 306506M ...........228 3260-05 ............228 333510S ...........143
276ADK ............129 3221-16 ............153
302D08 .............150 306508M ...........228 3260-05P ..........228 333511M ...........143
2769-55F ..........128 3221-18 ............153
302D09 .............150 306510M ...........228 3260-06 ............228 333511S ............143
2769-55P .........128 3221-24 ............153
2769DK ............128
302D10 .............150 31 xxx 3223-02 ............153
3260-06P ..........228 333512M ...........143
302D15 .............150 3260-08 ............228 333512S ...........143
2771-55F .........128 3103PR .............158 3223-03 ............153
302D20 .............150 3260-08P ..........228 333513M ...........143
2771-55G .........128 3105PR .............156 3223-06 ............153
302D25 .............150 3260-10 ............228 333514M ...........143
2771DK ............128 3106PR .............156 3223-10 ............153
302D27 .............150 3260-10P ..........228 333514S ...........143
2779-55F ..........128 3108PR8 ...........156 3223-14 ............153
302D30 .............150 32607MR ..........417 333515M ...........143
2779-55G .........128 3109PR8 ...........157 32218MR ..........417
302D40 .............150 327504M ..........145 333515S ...........143
2779DK ............128 31107MR ..........368 323007M ...........144
302D45 .............150 327505M ...........145 333516M ...........143
2781-06F .........128 31116MR ..........368 323008M ...........144
302D50 .............150 327506M ...........145 333516S ...........143
2781-06P .........128 3113PR .............158 323008S ...........144
302D55 .............150 327507M ...........145 333517M ...........143
2781DK ............128 3116PR .............156 323009M ...........144
302D60 .............150 327508M ...........145 333518M ...........143
2789-06F .........129 3118PR .............157 323010M ...........144
30307PR ...........369 327510M ...........145 333518S ...........143
2789-06P .........129 3119PR8 ...........157 323010S ...........144
30309PR ...........369 327511M ...........145 333519M ...........143
2789DK ............129 31216MR ..........368 323011M ...........144
30315PR ...........369 327512M ...........145 333519S ...........143
2792 .................132 3121PR …..……156 323012M ...........144
30317PR ...........369 327514M ...........145 333520M ...........143
28 xxx 30319PR ...........369
3129PR ...........156 323012S ...........144
327516M ...........145 333520S ...........143
3131PR8 ...........157 323013M ...........144
2813 ..................132 3034MR ............161 327518M ...........145 333521M ...........143
31416MR ..........373 323014M ...........144
30 xxx 3036CR ............162
31416MR-A .......373 323014S ...........144
32809MR ..........386 333522M ...........143
303904 ..............150 3293-03 ............153 333522S ...........143
3007MR01 .......157 31416MR-D ......373 323015M ...........144
303905 ..............150 3293-06 ............153 333523M ...........143
30115MR ..........368 31419MR ..........417 323016M ...........144
303906 ..............150 3293-10 ............153 333524M ...........143
30117MR ..........368 31419MR-A .......417 323016S ...........144
30118MR ..........368
303907 ..............150
31419MR-D ......417 323017M ...........144 33 xxx 333524S ...........143
303908 ..............150 333526S ...........143
30127MR ..........368 3146PR .............157 323018M ...........144 33108MR ..........368
303908 ..............580 333528S ...........143
3013MR ............155 314708S ...........228 323018S ...........144 3311-06 .............154
303909 ..............150 333530S ...........143
3013SR .............155 314710M ..........228 323019M ...........144 3311-12 .............154
303909 ..............580 333532S ...........143
3020MR …….....159 314710S ...........228 323020S ...........144 33111 ................505
303910 ..............150 33411-020 .........489
3020MR02 ........159 314808S ...........155 323021M ...........144 33112 ................505
303910 ..............580 33411-021 .........489
30206MR ..........372 314810S ...........155 323022M ...........144 33121 ................505
3050MR ............163 33411-040 .........490

Index 5
 Index ......
33411-041 .........490 33852-121 ........496 343516M ...........226 3446A-1DG .......272 34501241M ......275 34512-1EG .......273
33411-050 .........490 33852-250 ........499 343516S ...........227 3446A-1DK .......272 34501248S .......275 34512-1FG .......273
33411-051 .........490 33861-200 ........498 343517M ...........226 3446A-1DK01 ...272 34501410M ...…275 34512-2CG .......273
33412-040 ........490 33862-200 ........498 343518M ...........226 3446A-1DK01 ...274 34501411M ……275 34512-2DG .......273
33412-041 ........490 33871-160 ........495 343518S ...........227 3446A-1DK .......274 34501412M …...275 34512-2EG .......273
33412-050 ........490 33872-160 ........495 343519M ...........226 3446A-1EG .......272 34501413M …...275 34512-2FG .......273
33412-051 ........490 33911-250 ........499 343520M ...........226 3446A-2DG .......272 34501414M …...275 34512-3CG .......273
33421-040 ........490 33912-250 ........499 343520S ...........227 3446A-2EG .......272 34501416M …...275 34512-3DG .......273
33421-041 ........490 33921-300 ........499 343521M ...........226 3446E-1DK ……277 34501417M …...275 34512-3EG .......273
33431-065 ........491 33922-300 ........499 343522M ...........226 3446E-1HG .......277 34501418M …...275 34512-3FG .......273
33431-066 ........491 34 xxx 343522S ...........227 3446E-2HG ......277 34501419M …...275 34512-4DG .......273
33451-045 ........489 343523M ...........226 3446E-3HG .......277 34501421M …...275 3452-08F ..........154
3406MP ............229
33451-046 ........489 343524M ...........226 34486 ................284 34501422M …...275 3452-08G ..........154
3410MP ............229
33481-095 ........492 343524S ...........227 34487-1AG .......281 34502107M .......275 3452-10F ..........154
34101-040M .....601
33481-096 ........492 343526S ...........227 34488 ................284 34502108M .......275 3452-10G ..........154
34111-1DG ........283
335008M ...........148 343528S ...........227 34488-26 ..........285 34502108S .......275 345201D11MR..276
34111-1EG ........283
335009M ...........148 34362-1CG .......269 34501107M .......274 34502110M .......275 345201E11MR..276
34111-2DG .......283
335010M ...........148 34362-1DG .......269 34501108M .......274 34502110S ........275 345202D11MR..276
34111-2EG ........283
335011M ...........148 34362-1DK ...….269 34501108S ........274 34502111M .......275 345202E11MR..276
341118-17M ......360
335012M ...........148 34362-1EG .......269 34501109M .......274 34502112M .......275 345203D11MR..276
341142-22M ......360
335013M ...........148 34362-1GG .......269 34501110M .......274 34502112S ........275 345203E11MR..276
341155-26M ......360
335014M ...........148 34362-2CG .......269 34501110S ........274 34502113M .......275 34522-1CG .......273
341165-29M .....360
335015M ...........148 34362-2CG .......269 34501111M .......274 34502114M .......275 34522-1DG .......273
3411003MR01...360
335016M ...........148 34362-2DG .......269 34501112M .......274 34502114S ........275 34522-1EG .......273
3419PP .............229
335017M ...........148 34362-2DK …....269 34501112S .......274 34502115M .......275 34522-1FG .......273
34207-1A ..........282
335018M ...........148 34362-2EG .......269 34501113M .......274 34502116M .......275 34522-2CG .......273
34211-3DG........283
335019M ...........148 34362-2GG .......269 34501114M .......274 34502116S ........275 34522-2DG .......273
34223-1A ..........279
335108M ...........148 34362-3DG .......269 34501114S ........274 34502117M .......275 34522-2EG .......273
34223-1B ..........279
335109M ...........148 34367-2AG .......281 34501115M .......274 34502118M .......275 34522-2FG .......273
34223-1C ..........279
335110M ...........148 3436A-2DG ......272 34501116M .......274 34502118S .......275 34522-3CG .......273
34223-1DK1 .....279
335111M ...........148 3436A-2DK .......272 34501116S ........274 34502119M .......275 34522-3DG .......273
34262-1CG .......269
335112M ...........148 3436A-2DK .......274 34501117M .......274 34502120S .......275 34522-3EG .......273
34262-1DG .......269
335113M ...........148 3436A-2DK01 ...272 34501118M .......274 34502121M .......275 34522-3FG .......273
34262-1DK …....269
335114M ...........148 3436A-2DK01 ...274 34501118S ........274 34502122M .......275 34522-4DG .......273
34262-1EG .......269
335115M ...........148 3436A-2EG .......272 34501119M .......274 34502122S .......275 34522-5DG .......273
34262-1GG .......269
335116M ...........148 3436C-1DF .......271 34501120S ........274 34502124S .......275 34522-6DG .......273
34262-2DG .......269
335117M ...........148 3436C-1DK ……271 34501121M .......274 34502126S .......275 34522-7DG .......273
34262-3DG .......269
335118M ...........148 3436C-2DF .......271 34501122M .......274 34502128S .......275 34522-8DG .......273
3426A-1DG .......272
335119M ...........148 3436E-1DK …...277 34501122S ........274 34502213M .......276 34522-9DG .......273
3426A-1DK .......272
33611-055 .........493 3436E-1HG .......277 34501124M .......274 34502214M .......276 34607-1A ..........282
3426A-1DK .......274
33611-056 .........493 3436E-2HG .......277 34501124S ........274 34502215M .......276 3465G-1FB .......280
3426A-1DK01 ...272
33612-055 ........493 3436E-3HG .......277 34501127M .......274 34502216M .......276 3465G-2FB .......280
3426A-1DK01 ...274
33612-056 ........493 34387-2AG .......281 34501130M .......274 34502216S .......276 3465G-3FB .......280
3426A-1EG .......272
33621-075 ........493 34407-1A ….…..282 34501132M .......274 34502217M .......276 34660 ................283
3426A-2DG .......272
33621-076 ........493 34423-1A ..........279 34501136M .......274 34502218M .......276 34660A .............283
3426A-2EG .......272
33622-075 ........493 34423-1B ..........279 34501213M .......275 34502218S .......276 34662-1CG .......269
3426C-1DF .......271
33622-076 ........493 34423-1C ..........279 34501214M .......275 34502219M .......276 34662-1DG .......269
3426C-1DK ……271
33631-110 .........494 34423-1DK1 .....279 34501215M .......275 34502220S .......276 34662-1DK …....269
3426C-2DF .......271
33631-111 .........494 34423-2A ..........279 34501216M .......275 34502221M .......276 34662-1EG .......269
3426E-1DK .......277
33632-110 .........494 34423-2B ..........279 34501216S .......275 34502222M .......276 34662-1GG .......269
3426E-1HG .......277
33632-111 .........494 34423-2C ..........279 34501217M .......275 34502224M .......276 34662-2CG .......269
34307-1A ..........282
33671-160 ........495 34423-3DK …....279 34501218M .......275 34502224S .......276 34662-2DG .......269
34323-1A ..........279
33672-160 ........495 3442F-1KF .......278 34501218S .......275 34502227M .......276 34662-2EG .......269
34323-1B ..........279
33681-100 ........492 3442F-3KF .......278 34501219M .......275 34502230M .......276 34662-2GG .......269
34323-1C ..........279
33681-101 ........492 34440 ................283 34501220S .......275 34502232M .......276 34662-3CG .......269
34323-1DK1 .....279
337504M ...........145 34440A .............283 34501221M .......275 34502234M .......276 34662-3DG .......269
34323-2A ..........279
337505M ...........145 3445G-1FB ......280 34501222M .......275 34502236M .......276 34662-3DK1 …..269
34323-2B ..........279
337506M ...........145 34462-1CG .......269 34501222S .......275 34502241M .......276 34662-3EG .......269
34323-2C ..........279
337507M ...........145 34462-1DG .......269 34501223M .......275 34503102R .......274 34662-4EG .......269
34323-2DK1 .....279
337508M ...........145 34462-1DK …....269 34501224M .......275 34503102R01 ...274 34662-3GG .......269
3432F-1KF .......278
337510M ...........145 34462-1EG .......269 34501224S .......275 34503103R .......274 3466A-1DK …...274
3432F-3KF .......278
337511M ...........145 34462-1FG .......269 34501225M .......275 34503103R01 ...274 3466E-1DK.......277
343506M ..........226
337512M ...........145 34462-1GG .......269 34501226M .......275 34503104R .......274 3466E-1HG.......277
343507M ..........226
337514M ...........145 34462-2CG .......269 34501226S .......275 34503104R01 ...274 3466E-2HG.......277
343508M ..........226
337516M ...........145 34462-2DG .......269 34501227M .......275 34503203R .......274 34688 ................284
343508S ...........227
337518M ...........145 34462-3DG........269 34501228S .......275 34503203R01 ...274 3485G-1DB ......280
343509M ...........226
33811-150 .........497 34462-3DK........269 34501230M .......275 34503204R .......274 3485G-2DB ......280
343510M ...........226
33812-150 ........497 34462-4DG .......269 34501230S .......275 34503204R01 ...274 34862-1CG .......269
343510S ...........227
33831-180 ........497 34462-2EG .......269 34501232M .......275 34503206R .......274 34862-1DG .......270
343511M ...........226
33832-180 ........497 34462-2FG .......269 34501232S .......275 34503206R01....274 34862-1DK …....269
343512M ...........226
33841-180 ........496 34462-2GG ......269 34501234M .......275 345101E08MR..276 34862-1DK …....269
343512S ...........227
33842-180 ........496 34462-3GG .......269 34501236M .......275 345102D08MR..276 34862-1EG .......269
343513M ...........226
33851-120 ........496 34464-1DK .......278 34501236S .......275 345102E08MR..276 34862-1GG .......269
343514M ...........226
33851-121 ........496 34464-1FG .......278 34501238M ......275 345104D08MR..276 34862-2CF ........270
343514S ...........227
33851-250 ........499 34464-2FG .......278 34501240M .......275 34512-1CG .......273 34862-2CG .......270
343515M ...........226
33852-120 ........496 34467-1AG .......281 34501240S .......275 34512-1DG .......273 34862-2DF ........270

Index 6
Index ......
34862-2DG .......270 3611-10R ..........319 372115M ...........316 37323-080 ........503 3771-08F ..........152 401512S ...........238
34862-2DK ....…270 3611-12P ..........319 372116M ...........316 37323-081 ........503 3771-08G ..........152 401513M ...........238
34862-2DK ...….269 3611-12R ..........319 372116S ............316 37334-080 ........504 3771DK .............152 401514M ..........238
34862-2EF ........270 3611-15HP ........319 372117M ...........316 37334-081 ........504 3779-08F ..........152 401516S ...........238
34862-2EG .......270 3611-15HR ........319 372118M ...........316 37335-075 ........504 3779-08G ..........152 401517M ...........238
34862-2FF ........270 3611-18HP ........319 372118S ............316 37335-076 ........504 3779DK .............152 401519M ...........238
34862-1FG .......269 3611-18HR ........319 372119M ...........316 37360809M .......314 3781-11F ...........152 4016SR .............188
34862-2FG .......270 3611-24HP ........319 372120S ...........316 37361011M .......314 3781-11P ..........152 402102 ..............173
34862-2GG .......270 3611-24HR ........319 372122S ...........316 37361013M .......314 3781DK ............152 402103 ..............173
34862-3CF ........271 3612MR ............148 372124S ...........316 37361213M .......314 378508M ...........149 402104 ..............173
34862-3DK........271 36206MR ..........370 37221-030 ........504 37361415M .......314 378508M ...........584 402208 ..............173
34862-3DK90....271 363016 ..............146 37221-031 ........504 37361618M .......314 378509M ...........149 402210 ..............173
34862-3DK91....271 363016 ..............581 37235-030 ........504 37361719M .......314 378509M ...........584 402212 ..............173
34862-3FF ........271 363021 ..............146 37235-031 ........504 37370607M .......314 378510M ...........149 402214 ..............173
3488A03MP ......286 363021 ..............581 3725-08F ..........151 37370809M .......314 378510M ...........584 402216 ..............173
35 xxx 3631-10R ..........319 3725-08G .........151 37371011M .......314 378512M ...........149 402320 ..............175
363516 ..............146 3725DK ............151 37371213M .......314 378512M ...........584 402325 ..............175
3508MR ............158
363516 ..............581 373008M ...........310 37371415M .......314 378514M ...........149 402327 ..............175
3508MR10 ........156
363521 ..............146 373009M ...........310 37371618M .......314 378514M ...........584 402330 ..............175
3508SR .............158
363521 ..............581 373010M ...........310 37371719M .......314 378516M ...........149 402340 ..............175
35105MR ..........365
3641-35 ............320 373011M ...........310 37372123M .......314 378516M ...........584 402345 ..............175
35107MR ..........365
3641-50 ............320 373012M ...........310 37372224M .......314 3789-11F ...........153 402350 ..............175
3511-06 .............325
3641-80 ............320 373013M ...........310 373810M ...........315 3789-11P ..........153 402355 ..............175
3511-10 .............325
3641-C0 ............320 373014M ...........310 373811M ...........315 3789DK .............153 402360 ..............175
35114MR ..........371
3641-I0 .............320 373015M ...........310 373812M ...........315 3792 ..................154 402370 ..............175
35114MR01 ......371
366016 ..............581 373016M ...........310 373813M ...........315 3794 ..................154 4024MR ............190
35116MR01 ......365
366016 ..............146 373017M ...........310 373814M ...........315 3794 ..................579 4024SR .............190
3513MR ............155
366021 ..............581 373018M ...........310 373815M ...........315 3795-15 ............325 402503 ..............173
3520MR … ........159
366021 ..............146 373019M ...........310 373816M ...........315 3795-18 ............325 402504 ..............173
3520MR02 ........159
366516 ..............146 373108M ...........311 373817M ...........315 3795-24 ............325 402505 ..............173
3523MR ............159
366516 ..............581 373109M ...........311 373819M ...........315 3795-30 ............325 402506 ..............173
3523MR04 ........159
366521 ..............146 373110M ..........311 373A08M ..........314 3796 ..................229 402506S …...….173
3523MRV10 ......160
366521 ..............581 373111M ..........311 373A10M ..........314 3796P ...............229 402507 ..............173
3524MR ............160
3527MR ............161
367014 ..............146 373112M ...........311 373A12M ..........314 38 xxx 402507S …...….173
367014 ..............581 373113M ..........311 373A13M ..........314 402508 ..............173
3534MR ............161 3812 ..................155
367016 ..............146 373114M ...........311 373A14M ..........314 402508S …...….173
353506M ...........226 3814 ..................155
367016 ..............581 373115M ...........311 373A17M ..........314 402509 ..............173
353507M ...........226 3862 ..................228
367018 ..............146 373116M ...........311 373A19M ..........314 402509S …...….173
353508M ...........226 3862P ...............228
367018 ..............581 373117M ...........311 37423-080 ........503 402510 ..............173
353508S ...........226 3864 ..................229
367021 ..............146 373118M ...........311 37423-081 ........503 402510S …...….173
353509M ..........226 3864P ...............229
367021 ..............581 373119M ...........311 37434-080 ........504 402512 ..............173
353510M ...........226
367514 ..............146 373121M ...........311 37434-081 ........504 39 xxx 402512S …...….173
353510S ...........226
367514 ..............581 373122M ...........311 37435-075 ........504 39123010M .......483 402514 ..............173
353511M ...........226
367516 ..............146 373124M ...........311 37435-076 ........504 39123012M .......483 402514S …...….173
353512M ...........226
367516 ..............581 373202H ...........309 375010M ...........149 39124012M .......483 402516S …...….173
353512S ...........226
353513M ..........226
367518 ..............146 373202R ...........309 375011M ...........149 40 xxx 402517 ..............173
367518 ..............581 373203R ...........309 375012M ...........149 402518S …...….173
353514M ...........226 4010MR ............182
367521 ..............146 373204R ...........309 375012S ...........149 402519 ..............173
353514S ...........226 4010SR ............182
367521 ..............581 373208M ...........311 375013M ...........149 402520S …...….173
353515M ...........226 4012MR ............188
36A014 .............146 373209M ...........311 375014M ...........149 402524S …...….173
353516M ...........226 4012SR .............188
36A018 .............146 373210M ...........311 375014S ...........149 402605 ..............174
353516S ...........226 401408M ...........170
36A514 .............146 373210S ...........311 375015M ...........149 402606 ..............174
353517M ...........226 401408M ...........578
36A518 .............146 373211M ...........311 375016M ...........149 402608 ..............174
353518M ...........226 401409M ...........170
36B014 .............147 373212M ...........311 375016S ...........149 402610 ..............174
353518S ...........226 401409M ...........578
36B014 .............583 373212S ...........311 375017M ...........149 402612 ..............174
353519M ..........226 401410M ...........170
36B018 .............147 373213M ...........311 375018M ...........149 402614 ..............174
353520S ...........226 401410M ...........578
36B018 .............583 373214M ...........311 375018S ...........149 4026MR ............192
353522S ...........226 401411M ...........170
36B514 .............147 373214S ...........311 375019M ..........149 4026MR03 ........192
353524S ...........226 401411M ...........578
36B514 .............583 373215M ..........311 375020S ...........149 4026MR04 ........192
3537MR ............162 401412M ...........170
36C014 .............147 373216M ...........311 375022S ...........149 4026SR ............192
3568MR …….....163 401412M ...........578
36C014 .............583 373216S ...........311 375024S ...........149 4026SR03 ........192
3571-08 ............154 401413M ...........170
36D014 .............147 373217M ...........311 3752-09G ..........151 402720 ..............175
357505M ...........227 401413M ...........578
36D014 .............583 373218M ...........311 3752-09P ..........151 402725 ..............175
357506M ...........227 401414M ...........170
357507M ...........227 37 xxx 373218S ...........311 3752DK .............151
401414M ...........578
402727 ..............175
373219M ...........311 3755-08G ..........151 402730 ..............175
357508M ...........227 3716MR ............149 401419M ...........170
37321-050 ........504 3755DK .............151 402740 ..............175
357510M ...........227 3716MR ............584 401419M ...........578
37321-051 ........504 3756-08G ........151 402745 ..............175
357512M ...........227 372108M ...........316 401505M ...........238
373220S ...........311 3756DK ............151 402750 ..............175
357514M ...........227 372110M ...........316 401506M ...........238
373221M ...........311 3760-45 ............151 402755 ..............175
36 xxx 372110S ............316
373222M ...........311 3760DK .............151
401507M ...........238
402760 ..............175
372111M ...........316 401508M ...........238
3602MR ............148 373222S ...........311 3761-08F ..........152 4028MR ............193
372112M ...........316 401508S ...........238
3611-06P ..........319 373224M ..........311 3761-08P ..........152 4028MR02 ........193
372112S ............316 401509M ..........238
3611-06R ..........319 373224S ...........311 3761DK .............152 4028SR .............193
372113M ...........316 401510M ...........238
3611-08P ..........319 373225H ...........309 3769-08F ..........152 402A10 .............174
372114M ...........316 401510S ...........238
3611-08R ..........319 373228S ...........311 3769-08P ..........152 402B16 .............175
372114S ............316 401512M ...........238
3611-10P ..........319 373230S ...........311 3769DK .............152 402B16 .............580

Index 7
 Index ......
402B18 .............175 404914 ..............580 40D008 .............174 423016S ...........167 423546S ...........168 433008MR ........164
4030CR ………..189 404916 ..............175 40D010 .............174 423017M ...........167 423548S ...........168 433009MR ........164
4030CR01 ........189 404916 ..............580 40D506 ……..…173 423018M ...........167 424508M ...........169 433010MR ........164
4032MR ............193 404925 ..............175 40D508 …..……173 423018S ...........167 424509M ...........169 433010SR ........164
4032SR .............193 404925 ..............580 40D510 …..……173 423019M ...........167 424510M ...........169 433011MR ........164
403320 ..............175 405320 ..............237 41 xxx 423020M ...........167 424512M ...........169 433012MR ........164
403325 ..............175 405325 ..............237 423020S ...........167 424513M ...........169 433012SR ........164
41026MR ..........196
403327 ..............175 405327 ..............237 423021M ...........167 424514M ...........169 433013MR ........164
41026SR ..........196
403330 ..............175 405330 ..............237 423022M ..........167 4251-02R ..........179 433013SR .........164
4104PR .............179
403340 ..............175 405340 ..............237 423022S ...........167 4251-03R ..........179 433014MR ........164
4105PR .............184
403345 ..............175 405345 ..............237 423023M ..........167 4251-04R ..........179 433014SR .........164
4106PR .............183
403350 ..............175 405350 ..............237 423024M ...........167 4251-05R ..........179 433015MR ........164
4108FR .............196
403355 ..............175 405355 ..............237 423024S ...........167 4251-06R ..........179 433015SR .........164
4108PR10 .........184
403360 ..............175 405360 ..............237 423025M ..........167 4251-08R ..........179 433016MR ........164
4109PR .............186
403370 ..............175 405370 ..............237 423026M ...........167 4251-10R ..........179 433016SR .........164
4109PR10 .........184
4033MR ............190 405504M ...........237 423026S ...........167 425508M ...........169 433017MR ........164
4110PR .............186
4033SR .............190 405505M ...........237 423027M ..........167 425509M ...........169 433018MR ........164
4110PR10 .........183
4034MR ............194 405506M ...........237 423028M ...........167 425510M ...........169 433018SR .........164
4110SR10 …..…183
403504 ..............174 405506S ...........237 423028S ...........167 425512M ...........169 433019MR ........164
4111FR .............196
403505 ..............174 405507M ..........237 423029M ...........167 425513M ...........169 433019SR .........164
4112FR .............196
403506 ..............174 405508M ...........237 423030M ...........167 425514M ...........169 433020MR ........164
4116PR .............184
403507 ..............174 405508S ...........237 423030S ...........167 4260-03 ............239 433020SR .........164
4116PR .............580
403508 ..............174 405510M ...........237 423032M ...........167 4260-03P ..........239 433021MR ........164
4117PR .............187
403509 ..............174 405510S ...........237 423032S ...........167 4260-04 ............239 433022MR ........164
4118MR ............183
403510 ..............174 405512M ...........237 423033M ..........167 4260-04P ..........239 433022SR .........164
4119PR .............186
403511 ..............174 405512S ...........237 423034S ...........167 4260-05 ............239 433023MR ........164
4119PR10 .........184
403512 ..............174 405513M ...........237 423036M ...........167 4260-05P ..........239 433024MR ........164
4120PR .............186
403514 ..............174 405514M ...........237 423036S ...........167 4260-06 ............239 433024SR .........164
4120PR10 .........184
403517 ..............174 405514S ...........237 423038S ...........167 4260-06P ..........239 433025MR ........164
4121-11GR .......179
403519 ..............174 405516M ...........237 423040S ...........167 4260-08 ............239 433025SR ........164
4126PR ............184
4035MR ............194 405516S ...........237 423508M ...........168 4260-08P ..........239 433026MR ........164
4128PR .............187
403605 ..............174 405517M ...........237 423509M ...........168 4260-10 ............239 433026SR .........164
4136PR .............184
403606 ..............174 405518M ...........237 423510M ...........168 4260-10P ..........239 433027MR ........164
414708S ...........238
403608 ..............174 405519M ...........237 423510S ...........168 4260-12 ............239 433028MR ........164
414710M ...........238
403610 ..............174 405608M ...........237 423511M ...........168 4260-12P ..........239 433028SR .........164
414710S ...........238
403612 ..............174 405610M ...........237 423512M ...........168 4260-16 ............239 433029MR ........164
414808S ...........182
403614 ..............174 405612M ...........237 423512S ...........168 4260-16P ..........239 433030MR ........164
414810M ...........182
403720 ..............175 40603GP ……...342 423513M ...........168 4269-08-90 .......239 433030SR .........164
414810S ...........182
403725 ..............175 406325 ..............237 423514M ...........168 4269-08-A0 .......239 433032MR ........164
414A08S ...........238
403727 ..............175 406327 ..............237 423514S ...........168 4269-08-B0 .......239 433032SR .........164
41526MR ..........196
403730 ..............175 406330 ..............237 423515M ...........168 4269-08-C0 .......239 433033MR ........164
41526SR ...........196
403740 ..............175 406340 ..............237 423516M ...........168 4269-08-D5 .......239 433034MR ........164
403745 ..............175 406345 ..............237 42 xxx 423516S ...........168 4269-08-F0 .......239 433034SR .........164
403750 ..............175 406350 ..............237 4208MR ............185 423517M ...........168 4269-08-G0 ......239 433036MR ........164
403755 ..............175 406355 ..............237 4208MR10 ........183 423518M ...........168 4269-08-H5 ......239 433036SR .........164
403760 ..............175 406360 ..............237 4208SR .............185 423518S ...........168 4269-08-J0 .......239 433038SR .........164
404108 ..............174 406504M ...........238 42104GP ...........340 423519M ...........168 4269-08-K0 .......239 433040SR .........164
404108 ..............581 406505M ...........238 42104GP01 ......340 423520M ...........168 427510M ...........170 433044SR .........164
4042CR ............195 406506M ...........238 42107GX ..........447 423520S ...........168 427512M ...........170 433506MR ........165
4042CR02 ........195 406508M ...........238 42114GP ...........340 423521M ...........168 427514M ...........170 433507MR ........165
4044CR ............195 406510M ...........238 42116GP ...........340 423522M ...........168 427516M ...........170 433508MR ........165
404605 ..............174 406512M ...........238 42124GP ...........340 423522S ...........168 427518M ...........170 433509MR ........165
404607 ..............174 406514M ...........238 42124GP01 ......340 423523M ...........168 427520M ...........170 433510MR ........165
404608 ..............174 406608 ..............174 4215MR ............185 423524M ...........168 427522M ...........170 433510SR ........165
404610 ..............174 406608 ..............581 42154GP ...........340 423524S ...........168 427524M ...........170 433511MR ........165
404612 ..............174 406609 ..............174 4216MR ............185 423525M ...........168 4293-02 ............180 433512MR ........165
404614 ..............174 406609 ..............581 4220MR ............189 423526M ...........168 4293-05 ............180 433512SR ........165
404904 ..............175 406610 ..............174 4221-18 ............180 423526S ...........168 4293-10 ............180 433513MR ........165
404904 ..............580 406610 ..............581 4221-24 ............180 423527M ...........168 43 xxx 433514MR ........165
404905 ..............175 406612 ..............174 4221-30 ............180 423528M ...........168 433514SR .........165
4308MR ............185
404905 ..............580 406612 ..............581 4221-36 ............180 423528S ...........168 433515MR ........165
4308MR10 ........183
404906 ..............175 406614 ..............174 4223-02R ..........180 423529M ...........168 433515SR .........165
4311-16F ...........180
404906 ..............580 406614 ..............581 4223-05R ..........180 423530M ...........168 433516MR ........165
4311-16G ..........180
404907 ..............175 406616 ……...…174 4223-10R ..........180 423530S ...........168 433516SR .........165
4311MR ............183
404907 ..............580 4066MR ............169 423008M ...........167 423532M ...........168 433517MR ........165
4315MR ............186
404908 ..............175 4066SR ............169 423009M ...........167 423532S ...........168 433518MR ........165
4316MR ............186
404908 ..............580 4072MR ............166 423010M ...........167 423533M ...........168 433518SR .........165
4320MR ............189
404909 ..............175 4072SR ............166 423010S ...........167 423534S ...........168 433519MR ........165
4325MR ............189
404909 ..............580 407505M ...........238 423011M ...........167 423536M ...........168 433519SR .........165
43250115Y ........630
404910 ..............175 407506M ...........238 423012M ..........167 423536S ...........168 433520MR ........165
43260115Y ........630
404910 ..............580 407508M ...........238 423012S ...........167 423538M ..........168 433520SR .........165
43270115Y ........630
404912 ..............175 407510M ...........238 423013M ...........167 423538S ...........168 433521MR ........165
43290115Y ........630
404912 ..............580 407512M ...........238 423014M ...........167 423540S ...........168 433522MR ........165
43280212 ..........630
404913 ..............175 407514M ...........238 423014S ...........167 423541M ...........168 433522SR .........165
432A0113 …..…631
404913 ..............580 409616M ...........237 423015M ...........167 423542S ...........168 433523MR ........165
432A0213 …..…631
404914 ..............175 40D006 .............174 423016M ...........167 423544S ...........168 433524MR ........165

Index 8
Index ......
433524SR .........165 443016M ...........233 44506MP10 ......500 453020M ...........230 453540S ...........231 4762-15P ..........177
433525MR ........165 443017M ...........233 4452-15FR ........180 453020S ...........230 453541M ..........231 4762DK .............177
433525SR .........165 443018M ...........233 4452-18FR ........180 453021M ..........230 453546M ...........231 4767-10F ..........177
433526MR ........165 443019M ...........233 4452-24FR ........180 453022M ...........230 4535MR ............194 4767DK .............177
433526SR .........165 443020M ...........233 4452DK .............180 453022S ...........230 4542CR ............195 4768-10F ..........178
433527MR ........165 443020S ...........234 4452DK1 ...........180 453023M ..........230 4542CR02 ........195 4768-10G ..........178
433528MR ........165 443021M ...........233 4453-15F...........181 453024M ...........230 4544CR ............195 4768-10P ..........178
433528SR .........165 443022M ...........233 4453-18F...........181 453024S ...........230 4566MR ............169 4768-15F ..........178
433529MR ........165 443023M ...........233 4457MP ............246 453025M ..........230 4572-10 ............181 4768-15G .........178
433530MR ........165 443024M ...........233 4462-18F ..........181 453026M ..........230 4572-12 ............181 4768-15P ..........178
433530SR .........165 443024S ...........234 4462-24F ..........181 453026S ...........230 4572DK .............181 4768DK .............178
433532MR ........165 443027M ...........233 4462DK .............181 453027M ...........230 4572MR ............166 4771-10BR .......178
433532SR .........165 443028S ...........234 4466MP ............232 453028M ...........230 4572SR .............166 4771-10FR .......178
433533MR ........165 443030M ...........233 4466SP .............232 453028S ...........230 4573-10R ..........181 4771-10GR .......178
433534MR ........165 443030S ...........234 4467PP .............246 453029M ...........230 4573DK .............181 4771DK .............178
433534SR .........165 443032M ...........233 4472MP ............232 453030M ...........230 457510M ...........236 4772-10F .........178
433536MR ........165 443032S ...........234 4472SP .............232 453030S ...........230 457512M ...........236 4772-10FS ........178
433536SR .........165 443034S ...........234 4476MP ............246 453032M ..........230 457514M ...........236 4772-10G .........178
433538MR ........165 443036M ...........233 4481PP1 ……...240 453032S ...........230 457516M ...........236 4772-10GS .......178
433538SR .........165 443036S ...........234 44K928M ……...173 453033M ...........230 457518M ...........236 4772DK ..........178
433539MR ........165 443040S ...........234 44K932M ……...173 453034M ...........230 457520M ...........236 4772DK01 ........178
433540SR .........165 443042S ...........234 44K938M ……...173 453034S ...........230 4581-10 ............181 4779-10BR .......179
433541MR ........165 443048S ...........234 45 xxx 453036M ...........230 4583-12R ..........181 4779-10FR .......179
433546MR ........165 443508M ...........233 453036S ...........230 4584-12R ..........181 4779-10GR .......179
4501MR ............187
437510M ...........170 443509M ...........233
4503MR ............321
453038M ...........230 46 xxx 4779DK01 .........179
437512M ...........170 443510M ...........233 453038S ...........230 4781-12F ..........179
4505MR ............196 463014RC ........171
437514M ...........170 443510S ...........234 453041M ...........230 4781-12P ..........179
4505SR .............196 463014RC ........583
437516M ...........170 443511M ...........233 4532MR ............193 4781DK .............179
4506MR ............321 463016R ...........171
437518M ...........170 443512M ...........233 4532SR .............193 4791R ...............182
4510MR ............182 463016R ...........583
437520M ...........170 443512S ...........234 4533MR ............190 4794 ..................182
4510SR .............182 463021R ...........171
437522M ...........170 443513M ...........233 4533SR .............190 4794 ..................579
4511-06 .............325 463021R ...........583
437524M ...........170 443514M ...........233 4534MR ............194 4795-18 ............325
4511-10 .............325 463514RC ........171
44 xxx 443514S ...........234
45115PP ...........634
453508M ...........231
463514RC ........583
4795-24 ............325
443515M ...........233 453509M ...........231 4795-30 ............325
4405MX ............244 4511MR ............187 463516R ...........171
443516M ...........233 453510M ...........231 4795-36 ............325
4405MX ............606 4511SR .............187 463516R ...........583
443516S ...........234 453510S ...........231 4796 ..................241
4406MX ............244 4512MR ............188 463521R ...........171
443517M ...........233 453511M ...........231 4796P ...............241
4406MX ............607 4512SR .............188 463521R ...........583
443518M ..........233 453512M ...........231 4797 .................241
4407MP ............246 4516MR ............188 466016 ..............171
443518S ...........234 453512S ...........231 4797P ...............241
4408MP ............242 4516SR .............188 466016 ..............583
443519M ...........233 453513M ...........231 4798 .................241
4408SP ............242 45211PP ...........634 466021 ..............171
443520M ..........233 453514M ...........231 4798P ...............241
4410MP ............243 4523MRV01 …..190 466021 ..............583
443520S ...........234 453514S ...........231 479AP ...............241
4410MP01 ........243 4524MR ............190 466516 ..............171
4410SP .............243
443521M ...........223
4524SR .............190
453515M ...........231
466516 ..............583 48 xxx
443522M ..........223 453516M ...........231
44116MP ...........500 452513M ...........230 466521 ..............171 4813 ..................182
443522S ...........234 453516S ...........231
44116MP04 ......500 452514M ...........230 466521 ..............583 4816 ..................182
443523M ...........233 453517M ...........231
44116MP10 ......500 452517M ...........230 467014C ...........171 48280180 ..........630
443524M ..........233 453518M ...........231
44118MP ...........501 452519M ...........230 467016 ............171 483510M ...........234
443524S ...........234 453518S ...........231
44118MP04 ......501 452521M ...........230 467021 ............171 483511M ...........234
443525M ...........233 453519M ...........231
44118MP10 ......501 452522M ...........230 467514C ...........171 483512M ...........234
443526M ..........233 453520M ...........231
4412MP ............243 452524M ...........230 467516 ..............171 483513M ...........234
443526S ...........234 453520S ...........231
4413MP ............244 4526MR ............192 467521 ............171 483514M ...........234
443527M ...........233 453521M ...........231
4414MP ............243
443528M ...........233
4526MR03 ........192
453522M ...........231 47 xxx 483516M ...........234
4414SP .............243 4526MR04 ........192 483517M ...........234
443528S ...........234 453522S ...........231 4724-01 ............360
441517M ...........235 4526MR15 ........191 483519M ...........234
443529M ...........233 453523M ..........231 4724-11G ..........360
441517M ...........607 4526SR .............192 483521M ...........234
443530M ..........233 453524M ...........231 4725-10FR ........176
441519M ...........235 4526SR03 .........192 483522M ...........234
443530S ...........234 453524S ...........231 4725-10GR .......176
441519M ...........607 4528MR ............193 483523M ...........234
443532M ...........233 453525M ..........231 4725-12BR .......176
441521M ...........235 4528MR02 ........193 483524M ...........234
443532S ...........234 453526M ...........231 4725-12FR .......176
441521M ..........607 4528SR .............193 483526M ...........234
443533M ..........233 453526S ...........231 4725-12GR .......176
441522M ...........235 4530CR ……..…189 483527M ...........234
443534M ..........233 453527M ...........231 4725DKR01 ......176
441522M ...........607 4530CR01 ........189 483530M ...........234
443534S ...........234 453528M ...........231 4752-12G ..........176
4415MP ............244 453008M ...........230 4863 ..................241
443536M ..........233 453528S ...........231 4752-12P ..........176
4415MP03 ........244 453009M ...........230 4863P ...............241
443536S ...........234 453529M ...........231 4752DK .............176
4416SP .............244 453010M ...........230 4866 ..................241
443538M ..........233 453530M ...........231 4755-10G ..........176
4417PP .............246 453011M ...........230 4866P ...............241
443538S ...........234 453530S ...........231 4755DK .............176
4418MP ............246 453012M ...........230 4873 ..................241
443540S ...........234 453532M ...........231 4756-10G ……..176
4423MP ............242 453013M ...........230 4873P ...............241
443541M ...........233 453532S ...........231 4756DK ………..176
443008M ...........233
443542S ...........234
453014M ...........230
453533M ...........231 4760-05 ............177 49 xxx
443009M ...........233 453015M ...........230
443546M ..........233 453534M ...........231 4760-05G ..........177 49151719M .......235
443010M ...........233 453016M ...........230
4440MP ............235 453534S ...........231 4760DK .............177 49151719M .......607
443011M ...........233 453016S ...........230
4440SP .............235 453536M ...........231 4762-10F ..........177 49151921M .......235
443012M ...........233 453017M ..........230
4450MP ............235 453536S ...........231 4762-10G ..........177 49151921M .......607
443013M ...........233 453018M ...........230
4450SP .............235 453538M ...........231 4762-10P ..........177 49152122M .......235
443014M ...........233 453018S ...........230
44506MP ..........500 453538S ...........231 4762-15F ..........177 49152122M .......607
443015M ...........233 453019M ...........230
44506MP01 ......500 453539M ...........231 4762-15G ..........177 49152123M .......235

Index 9
 Index ......
49152123M .......607 4A5522M ..........236 5071-52 ............293 59301214 ..........304 6111-06 .............331 623541M ...........199
49152426S .......235 4A5522S ...........236 5071-54 ............293 59301618 ..........304 6111-07 .............331 623542M ...........199
49152426S .......607 4A5524M ..........236 5071-56 ............293 59301820 ..........304 6111-07C ..........331 623543M ...........199
493008M ...........234 4A5524S ...........236 5071-58 ............293 59302224 ..........304 6111-08 .............331 623544M ...........199
493009M ...........234 4A5526S ...........236 5071-60 ............293 59302428 ..........304 6111-08C ..........331 623545M ...........199
493010M ...........234 4A5528S ...........236 5071-62.............293 59601214 ..........298 6112-09 ............331 623546M ...........199
493011M ...........234 4A5530S ...........236 5071-64 ............293 59601618 ..........298 6112-09C ..........331 623547M ...........199
493012M ...........234 4B xxx 5084-16 ............318 59602022 ..........298 6114-05 .............331 623548M ...........199
493013M ...........234 5084-18 ............318 59602428 ..........298 6116-07A ...........341 623549M ...........199
4B5510M ..........236
493014M ...........234 5092CR ............208 59603032 ..........298 6116-08A ...........341 623550M ...........199
4B5511M ...........236
493015M ...........234
4B5512M ..........236 51 xxx 59700810 ..........300 6121-06X ……...345 623551M ...........199
493016M ...........234 59701012 ..........300 6121-09X ……...345 623552M ...........199
4B5512S ...........236 5169PR ............385
493017M ...........234 59701214 ..........300 6122-06X ……...345 623553M ...........199
493018M ...........234
4B5513M ..........236 54 xxx 59701416 ..........300 6122-09X ……...345 623554M ...........199
4B5514M ..........236
493019M ...........234 5450-08 ............378 59701618 ..........300 6131-12 ............337 623555M ...........199
4B5514S ...........236
493020M ...........234 5450-10 ............378 59701820 ..........300 6131-12P01 ......337 623556M ...........199
4B5515M ..........236
493021M ...........234
4B5516M ..........236 55 xxx 59702022 ..........300 6131-14 ............337 623557M ...........199
493022M ...........234 59702224 ..........300 6131-14P01 ......337 623558M ...........199
4B5516S ...........236 5522MR ............207
493023M ...........234 59702428 ..........300 6131-18 ............337 623559M ...........199
493024M ...........234
4B5517M ..........236 57 xxx 59702628 ..........300 6131-18P01 ......337 623560M ...........199
4B5518M ..........236
493027M ...........234 572210M ...........323 59703032 ..........300 6131-24 ............337 623563M ...........199
4B5518S ...........236
493030M ...........234 572212M ...........323 59703436 ..........300 6131-24P01 ......337 623565M ...........199
4B5519M ..........236
493032M ...........234 574208M ...........323 59703640 ..........300 6131-30 ............337 623570M ...........199
4B5520S ...........236
493036M ...........234 574210M ...........323 59703842 ..........300 6131-30P01 ......337 6236-07A ..........341
4B5521M ..........236
493510M ...........235
4B5522M ..........236
574212M ...........323 60 xxx 6131-36 ............337 6247-05 ............412
493510S ...........235 574213M ...........323 6131-36P01 ......337 6251-04 ............200
4B5522S ...........236 6011-05R ..........343
493511M ...........235 574214M ...........323 6131-42 ............337 6251-08 ............200
4B5524M ..........236 6011-07N ..........343
493512M ...........235 574217M ...........323 6131-42P01 ......337 6251-16 ............200
4B5524S ...........236 6011-07R ..........343
493512S ...........235 575208M ...........324 6133-08 ............338 6260-04 ............252
4B5526S ...........236 6011-10N ..........343
493513M ...........235 575210M ...........324 6141-06C ..........433 6260-04P ..........252
4B5528S ...........236 6011-10R ..........343
493514M ...........235 575212M ...........324 6141-08C ..........433 6260-07 ............252
4B5530S ...........236 6012-07N ..........343
493514S ...........235 575213M ...........324 6146-08A ..........341 6260-07P ..........252
493516M ...........235 50 xxx 575214M ...........324
6012-10N ..........343
62 xxx 6260-10 ............252
6013MR ............202
493516S ...........235 5022MR ............207 575217M ...........324 6260-10P ..........252
6013MR01 ........202 6207-05 ............412
493517M ..........235 5022SR .............207 576208M ...........324 6260-13 ............252
6014MR ...........202 6211-06 .............332
493518S ...........235 502503H ...........379 576210M ...........324 6260-13P ..........252
6014MR12 .......204 6213-06 ............332
493519M ...........235 502503H.B ........379 576212M ...........324 6271-05C .........413
601514M ...........251 6214-05 ............332
493520S ...........235 502504H ...........379 576213M ...........324 6271-65C .........413
601517M ...........251 6214-45 ............332
493521M ...........235 502504H.B ........379 576214M ...........324
601519M ...........251 6216-06A ..........341 63 xxx
493522M ...........235 502505H ...........379 576217M ...........324
601521M ...........251 6217-05 ............412 6311-06 .............333
493522S ...........235 502505H.B ........379 577208M ...........324
601522M ...........251 6224CR ............203 6311-08 .............333
493523M ..........235 502506H ...........379 577210M ...........324
601524M ...........251 6226CR ............203 6313-06 ............333
493524M ...........235 502506H.B ........379 577212M ...........324
601527M ...........251 623032M ………198 6314-05 ............333
493524S ...........235 502507H ...........379 577213M ...........324
6016MR ............202 623033M ………198 6314MR …….....202
493526M ..........235 502507H.B ........379 577214M ...........324
6016SR .............202 623036M ………198 6314MR12 ........204
493526S ...........235 502508H ...........379 577217M ...........324
602360 .............200 623039M ………198 6315-06 ............344
493527M ...........235 502508H.B ........379 577406M ...........324
602370 .............200 623041M ………198 6315-09 ............344
493528S ...........235 502509H ...........379 577407M ...........324
602380 .............200 623046M ………198 6316MR ............202
493530M ..........235 502509H.B ........379 577408M ...........324
602390 .............200 623050M ………198 6317-06 ...........413
493530S ...........235 502510H ...........379 577409M ...........324
6023A0 .............200 6231-07 ............332 6318-08A ..........341
493532S ...........235 502510H.B ........379 577410M ...........324
602514 .............200 6231-08 ............332 6319-11C ..........334
493534S ...........235 5039CR ............207 577411M ...........324
602517 .............200 623517M ...........199 6323MR ............203
493536S ...........235 5060-08 ............293 577412M ...........324
602519 .............200 623518M ...........199 6329-13C ..........334
493538S ...........235 5060-10 ............293 577413M ...........324
602522 .............200 623519M ...........199 633017M ...........197
493540S ...........235 5060-12 ............293 577414M ...........324
6023MR ............203 623520M ...........199 633019M ...........197
494517MX ........235 5060-14 ............293 577415M ...........324
6023SR .............203 623521M ...........199 633021M ...........197
494519MX ........235 5060-16 ............293 577416M ...........324
6031-07N ..........343 623522M ...........199 633022M ...........197
494521MX ........235 5060-18 ............293 577417M ...........324
6031-07R ..........343 623523M ...........199 633022S ...........197
4A xxx 5060-20 ............293 577418M ...........324
6031-10N ..........343 623524M ...........199 633023M ...........197
5060-22 ............293 577419M ...........324
4A5510M ..........236 6031-10R ..........343 623525M ...........199 633024M ...........197
4A5511M ..........236
5060-24 ............293 59 xxx 609616M ...........252 623526M ...........199 633024S ...........197
5060-26 ............293
4A5512M ..........236 59000810 ..........297 609616M10H ....251 623527M ...........199 633026M ...........197
5060-28 ............293
4A5512S ...........236 59001012 ..........297 609616M12H ....251 623528M ...........199 633026S ...........197
5060-30 ............293
4A5513M ..........236 59001214 ..........297 609616M14H ....251 623529M ...........199 633027M ...........197
5060-32 ............293
4A5514M ..........236 59001416 ..........297 609616M17H ....251 623530M ...........199 633028M ...........197
5060-34 ............293
4A5514S ...........236 59001618 ..........297 609616M19H ....251 623531M ...........199 633028S ...........197
5060-36 ............293
4A5515M ..........236 59001820 ..........297 609616M22H ....251 623532M ...........199 633029M ...........197
5060-40 ............293
4A5516M ..........236 59002022 ..........297 609622M ...........242 623533M ...........199 633030M ...........197
5063-14 ............295
4A5516S ...........236 59002224 ..........297 609622M19H ....251 623534M ...........199 633030S ...........197
5063-16 ............295
4A5517M ..........236 59002628 ..........297 609622M22H ....251 623535M ...........199 633032M ...........197
5063-18 ............295
4A5518M ..........236 59003032 ..........297 609622M24H ....251 623536M ...........199 633032S ...........197
5071-42 ............293
4A5518S ...........236 59003034 ..........297 609622M27H ....251 623537M ...........199 633033M ...........197
5071-44 ............293
4A5519M ..........236 59003236 ..........297 609622M30H ....251 623538M ...........199 633034M ...........197
5071-46 ............293
4A5520S ...........236 59003640 ..........297 609622M32H.....251 623539M ...........199 633034S ...........197
5071-48 ............293
4A5521M ..........236
5071-50 ............293
59301012 .........304 61 xxx 623540M ...........199 633035M ...........197

Index 10
Index ......
633036M ...........197 633549M ...........198 643544S ..........249 653019M ...........247 653546S ...........248 67F1-08 ............443
633036S ...........197 633550M ...........198 643546M ...........249 653021M ...........247 653548M ...........248 67G ...................444
633038M ...........197 633551M ...........198 643546S ...........249 653022M ...........247 653548S ...........248 67G0005 ...........445
633038S ...........197 633552M ...........198 643548M ...........249 653023M ...........247 653550M ...........248 67HB-07 ...........339
633040S ...........197 633553M ...........198 643548S ...........249 653024M ...........247 653550S ...........248 67HS-07 ...........339
633041M ...........197 633554M ...........198 643550M ..........249 653026M ...........247 653552M ...........248 67SB-07 ...........339
633042M ...........197 633555M ...........198 643550S ...........249 653027M ...........247 653552S ...........248 67SS-07 ............339
633042S ...........197 633556M ...........198 643552S ...........249 653028M ...........247 653554M ..........248 68 xxx
633044S ...........197 633557M ...........198 643554S ...........249 653029M ...........247 653554S ...........248
6814 ..................201
633046M ...........197 633558M ...........198 643555M ..........249 653030M ...........247 653555M ..........248
6818 ..................201
633046S ...........197 633559M ...........198 643556S ...........249 653032M ...........247 653556S ...........248
683517M ...........250
633048M ...........197 633560M ...........198 643558S ...........249 653033M ...........247 653557M ...........248
683519M ...........250
633048S ...........197 633563M ...........198 643560M ..........249 653034M ...........247 653558M ...........248
683521M ...........250
633050M ...........197 633565M ...........198 643560S ...........249 653035M ...........247 653558S ...........248
683522M ...........250
633054M ...........197 633570M ...........198 643562S ...........249 653036M ...........247 653560M ..........248
683523M ...........250
633055M ...........197 6336-08A ..........342 643564S ...........249 653038M ...........247 653560S ...........248
683524M ...........250
633050S ...........197 6337-06 ............414 643565M ..........249 653040M ...........247 653562S ...........248
683526M ...........250
633052S ...........197 6339-13C ..........334 6452-18F ..........201 653041M ...........247 653563M ..........248
683527M ...........250
633054S ...........197 6347-05 ............414 6452-30F ..........201 653042M ...........247 653564S ...........248
683529M ...........250
633056S ...........197 6367-06 ..........413 6452DK .............201 653046M ...........247 653565M ..........248
683530M ...........250
633058M ...........197 6377-55 ............413 6463-08C ..........336 653063M ...........247 653566S ...........248
683532M ...........250
633058S ...........197 63A7-05 ............414 647518M ...........251 653065M ...........247 653568S ...........248
6864 ..................253
633060M ...........197 63B7-05 ............414 647520M ...........251 653070M ...........247 653570S ...........248
6864P ...............253
633060S ...........197 64 xxx 647522M ...........251 6531-10 ............355 653572S ...........248
6868 ..................253
633062S ...........197 647524M ...........251 6531-12 ............355 653574S ...........248
6408MP ............254 6868P ...............253
633063M ...........197 64K975M …..….199 6531-14 ............355 653576S ...........248
6408MP10 ........254 6874 ..................253
633064S ...........197
6408SP10 .........254 65 xxx 6531-18 ............355 6541-14L ..........356
6874P ...............253
633065M ...........197 6531-24 ............355 6541-18L ...........356
6409MP ............254 651017M ...........247 68GB-01 ...........634
633066S ...........197 6531-36 ............355 6572-20 ............201
6409MP03 ........254 651018M ...........247 68GB-02 ...........634
633068S ...........197 6531-48 ............355 6572DK .............201
6409MP10 ........254 651019M ...........247 68GR-01 ...........634
633070M ..........197 6532-08 ............356 657524M ...........250
6409SP10 .........254 651021M ...........247 68GS-11 ...........634
633070S ...........197 6532-10 ............356 657526M ...........250
6410MP ............255 651022M ...........247 68GS-16 ...........634
633072S ...........197 6532-12 ............356 657528M ...........250
6410SP .............255 651023M ...........247 68GQ-01 ...........634
633074S ...........197 6532-14 ............356 657530M ...........250
6411-06 ............335 651024M ...........247 68GQ-02 ...........634
633076S ...........197 6532-18 ............356 657532M ...........250
64111MP ...........501 651026M ...........247 68HB-05 ...........339
633078S ...........197 6532-24 ............356 6581-12 ............201
64111MP01 .......501 651027M ...........247 68HB-07 ...........339
633080S ...........197 6532-36 ............356 6581-18 ............201
64111MP12 .......501 651028M ...........247 68HB-10 ...........339
633082S ...........197 6532-48 ............356 6585-19 ............201
64115MP ...........502 651029M ...........247 68HS-05 ...........339
633084S ...........197
64115MP01 ......502 651030M ...........247
653513M ...........248 66 xxx 68HS-07 ...........339
633086S ...........197 653517M ...........248
64115MP12 ......502 6511-10 .............336 6605-08 ............344 68HS-10 ...........339
633088S ...........197 653518M ...........248
6411MP .............255 6511-10C ..........336 6615-06 ............345 68RB-01 ...........634
6331-06 ............335 653519M ...........248
6431-10C ..........335 6511-13C ..........336 6615-11 ............345 68RB-02 ...........634
6331-08 ............335 653521M ...........248
6431-11C ..........335 6511-17C ..........336 6615-18 ............345 68RR-01 ...........634
6334-05 ............335 653522M ...........248
643519M ...........249 651417M ...........251 6625-06 ............345 68RS-11 ...........634
633517M ...........198 653522S ...........248
643521M ...........249 651419M ...........251 6625-11 ............345 68RS-16 ...........634
633518M ...........198 653523M ..........248
643522M ...........249 651420M ...........251 6625-18 ............345 68RQ-01 ...........634
633519M ...........198 653524M ..........248
643523M ...........249 651421M ...........251 6655-09 ............344 68RQ-02 ...........634
633520M ...........198 653524S ...........248
643524M ...........249 651514M ...........247 6665-09 ............344 68SB-05 ............339
633521M ...........198 653526M ..........248
643524S ...........249 651515M ..........247 66SB-07 ...........338 68SB-07 ............339
633522M ...........198 653526S ...........248
643525M ...........249 651516M ...........247 66SS-07 ...........338 68SB-10 ............339
633523M ...........198 653527M ...........248
643526M ...........249 651517M ...........247 66HB-07 ...........338 68SS-05 ............339
633524M ...........198 653528M ...........248
643526S ...........249 651518M ...........247 66HS-07 ...........338 68SS-07 ............339
633525M ...........198 653528S ...........248
633526M ...........198
643527M ...........249 651519M ...........247
653529M ..........248 67 xxx 68SS-10 ............339
643528M ...........249 651521M ...........247 68ZZ-01 ............634
633527M ...........198 653530M ...........248 6711-06 .............336
643528S ...........249 651522M ...........247 68ZZ-02 ............634
633528M ...........198 653530S ...........248 6716-06A ..........342
633529M ...........198
643529M ..........249 651523M ...........247
653531M ...........248 6721-10 ............446 69 xxx
643530M ..........249 651524M ...........247
633530M ...........198 653532M ...........248 6724-20F …..….200 6921-05 ….........333
643530S ...........249 651525M ...........247
633531M ...........198 653532S ...........248 6724DK ….…….200 6921-05C ..........333
643532M ..........249 651526M ...........247
633532M ...........198 653533M ...........248 6732-09 ............446 6921-06 ............333
643532S ...........249 651527M ...........247
633533M ...........198 653534M ...........248 6741-06 ............446 6921-06C ..........333
643533M ..........249 651528M ...........247
633534M ...........198 653534S ...........248 6751-44 ............436 6921-07 ............333
643534M ...........249 651529M ...........247
633535M ...........198 653535M ...........248 6755-05 ............438 6921-07C ..........333
643534S ...........249 651530M ...........247
633536M ...........198 653536M ...........248 6756-05 ............438 6927-05 ............412
643535M ...........249 6516-10 ............336
633537M ...........198 653536S ...........248 6762-08 ............437 693519M ...........250
643536M ...........249 6516-10C ..........336
633538M ...........198 653538M ...........248 6779-20F ..........200 693521M ...........250
643536S ...........249 6516-10A ..........342
633539M ...........198 653538S ...........248 6779DK .............200 693522M ...........250
643538M ...........249 6517-08C .........337
633540M ...........198 653540M ...........248 6791 ..................201 693523M ...........250
643538S ...........249 6517-10C .........337
633541M ...........198 653540S ...........248 6797 ..................252 693524M ...........250
643540M ..........249 6517-12C .........337
633542M ...........198 653541M ...........248 6797P ...............252 693524S ...........250
643540S ...........249 6521-09 ...........355
633543M ...........198 653542M ...........248 6798 .................252 693526M ..........250
643541M ...........249 6521-13 ...........355
633544M ...........198 653542S ...........248 6798P ...............252 693526S ...........250
643542M ...........249 6521-16 ...........355
633545M ...........198 653543M ...........248 67A1-07 ............437 693527M ...........250
643542S ...........249 6521-21 ...........355
633546M ...........198 653544M ...........248 67B2-05 ...........439 693528S ...........250
643543M ...........249 6521-26 ...........355
633547M ...........198 653544S ...........248 67B3-55 ............440 693529M ...........250
643544M ...........249 653017M ...........247
633548M ...........198 653546M ..........248 67E2-08 ............441 693530M ...........250

Index 11
 Index ......
693530S ...........250 7087MR ...........214 715008H ...........389 734503P ...........390 7581MR ............212 76302-74G ........456
693532M ..........250 7096MR ...........215 715008T ...........389 734551P ...........391 7581MR01 ........212 76303-05 ..........455
693532S ...........250 7098MR ...........216 715008U …..…..390 734552P ...........391 7582MR ............213 76303-74G ........456
693534S ...........250 71 xxx 715009T ...........389 736501P ...........390 7587MR …....….214 76304-05 ..........455
693536S ...........250 715009U …..….390 736502P ...........390 7587MR01 …….214 76304-74G ........456
711002P ............389
693538S ...........250 715010T ...........389 736503P ...........390 7587SR ....…….214 76305-05 ..........455
711102H ............389
693540S ...........250 715010U ...........390 736552P ...........391 7596MR ............215 76305-74G ........456
711103H ............389
6A xxx 711104H ............389
715015T ...........389 74 xxx 7598MR ............216 76306-05 ..........455
715015U ...........390 759-140 ............393 76306-74G ........456
6AB12-55 ..........432 711105H ............389 74010 ................479
715020T ...........389 75A105M ..........393 76307-05 ..........455
6AB13-06 ..........431 711106H ............389 74020 ................479
715020U …..…..390 75A106M ..........393 76308-05 ..........455
6AB21-65 ..........431 711107H ............389 74030 ................479
715025H ...........389 75A108M ..........393 76308-74G ........456
6AB31-75 ..........432 711108H ............389 74040 ................479
715025T ...........389 75A110M ...........393 76309-06 ..........455
6AB31-85 ..........432 711110H ............389 74060 ................479
715025U …..…..390 75A112M ...........393 76310-06 ..........455
6AC51-22 .........448 711110T ............389 741002P ...........390
715027T ...........389 75A114M ...........393 76402-45 ..........455
6AC51-26 .........448 711110U ............390 7411PP .............242
715027U ...........390 75A116M ...........393 76402-55G ........456
6AC52-11 .........449 711115T ............389 741502P ...........390
6AC52-12 .........449 711115U ............390
715030T ...........389
742002P ……....390 76 xxx 76403-05 ..........455
715030U ...........390 76403-06 ..........455
6AD10-325 .......433 711120T ............389 74250 ................479 7601012M .........393
715035S1 .........389 76403-06G ........456
6AD10-3P01 .....434 711120U ............390 74260 ................479 7606508S .........393
715040T ...........389 76404-06 ..........455
6AD17-150 .......433 711125H ............389 74270 ................479 7606510S .........393
715040U ...........390 76404-07G ........456
6AD23-400 .......433 711125T ............389 743002P …...….390 7606512M .........393
715045S1 .........389 76405-65 ..........455
6AF11-125 ........421 711125U ............390 74410 ................480 7606512S .........393
715050T ...........389 76405-08G ........456
6AF21-165 ........421 711127T ............389 74412 ................480 7607510M .........393
715055S1 .........389 76406-07 ..........455
6AG11-20 .........422 711127U ............390 74414 ................480 76103-04 ..........455
715055S2 .........389 76406-84G ........456
6AH .................422 711130T ............389 74416 ................480 76104-05 ..........455
715065S1 .........389 76407-84G ........456
6AH11 .............422 711130U ............390 745002P ...........390 76104-74G ........456
716502P ...........389 76408-08 ..........455
6AH12 ...............422 711140T ............389 74512 ................480 76105-06 ..........455
717000R ...........390 76408-88G .......456
6AH13 ..............422 711140U ............390 74514 ................480 76106-74G ........456
717001P ...........389 76409-88G .......456
6AH14 ...............422 7112PR .............207 74613 ................480 76108-74G ........456
717001R ...........390 76410-85 ..........455
6B xxx 7113PR .............207
717001Z ...........390
747501P ...........390 7611006M .........394
76410-09G ........456
711501P ............389 747502P ...........390 7611008M .........394
6BC100 ............421 717002P ...........389 76410-14G ........456
711502P ............389 747503P ...........390 76110-74G ........456
6BC200 .............421 717002R ...........390 76412-09 ..........455
6BC210A ..........418
711503P ............389
717002Z ..........390 75 xxx 7611010M .........394
76412-10G ........456
711505H ...........389 7611012M .........394
6BC210B ..........418 717003P ...........389 750-100 ............391 76412-14G ........456
711506T ............389 7611013M .........394
6BC210C ..........418 717003R ...........390 750-150 ............391 76414-10 ..........455
711507H ...........389 7611014M .........394
6BC210D ..........418 717003Z ...........390 7503MR ............217 76414-11G ........456
711507T ............389 7611507M .........394
6BC210F ..........418 717006T ...........389 750-50A ............391 76414-14G ........456
711508T ............389 7611508M .........394
6BC23-1 ...........418 717007T ...........389 750-60 ..............391 76416-12G ........456
711509T ............389 7611510M .........394
6BC23A ….…....418 717008T ...........389 750-75 ..............391 76416-14G ........456
711510T ............389 7611512M .........394
6BC23B …….....418 717009T ...........389 751-60 ..............391 76505-05...........455
711515T ............389 7611513M .........394
6BC23C ............418 717010T ...........389 751-75 ..............391 76717-05 ..........457
711520T ............389 7611514M .........394
6BC23D …….....418 717010U ...........390 75101-08G ......481 76721-06 ..........457
711525T ............389 7612006M .........394
6BC23F …….....418 717015T ............389 75101-10G ......481 76724-08 ..........457
711527T ............389 7612008M ........394
6BC24A …….....418 717015U ...........390 75102-08G .......481 76729-10 ..........457
711530T ............389 7612012M .........394
6BC24B …….....418 717020T ............389 75102-10G ........481 76804-05 ………457
711540T ............389 7612014M .........394
6BC24C …….....418 717020U ...........390 7510MR ............218 76807-06 ………457
7120PR .............208 76125-74G ........456
6BC24F …….....418 717025T ...........389 7511MR ...........219 76B808M ..........394
7120PR01 .........208 7614208S .........394
6BC26-1 ...........418 717025U ...........390 752-100 ............392 76B809M ..........394
715000P ...........389 7614210S .........394
6BC26-3 ...........418 717027T ...........389 752-150 ............392 76B810M ..........394
715001P ...........389 7614512S .........394
6BC26A …….....418 717027U ...........390 752-300 ............392 76B811M ...........394
715002P ...........389 7616505M .........394
6BC26B …….....418 717030T ...........389 752-60 ..............392 76B812M ..........394
715003P ...........389 7616506M .........394
6BC26C ……....418 717030U ...........390 752-75 ..............392 76B813M ..........394
715004P ...........389 7616507M .........394
6BC26F …….....418 717040T ...........389 75201-08G ........481 76B814M ..........394
715000R ...........390 7616508M .........394
6BC3007 ...........419 717040U ...........390 75201-10G ........481 76B815M ..........394
715001R ...........390 7616508S .........394
6BD11 ...............420 719001P ...........389 75202-08G ........481 76B816M ..........394
715001Z ...........390 7616510M ........394
6BD22 ...............420 719001Z ...........390 75202-10G ........481 76B817M ..........394
715002H ...........389 7616510S .........394
6BE11-07 ..........420 719002P ...........389 7528MR ...........220 76B819M ..........394
715002R ...........390 7616512M .........394
6BE12-07 .......420 719002Z ...........390 7528MR01 .......220 76B821M ..........394
715002Z ...........390 7616513M .........394
6BE16-07 ........420 719003P ...........389 753-63 ..............392 76B822M ..........394
715003H ...........389 7616512S .........394
6BF11-17 ..........420 719003Z ...........390 75302-08G .......482 76B824M ..........394
715003R ...........390 7616514M .........394
6C xxx 715003S1 .........389 72 xxx 75302-10G ........482
7616514S .........394 77 xxx
753-370 ............392
6CB02 …….......428 715003Z ...........390 721102P ............390 76213-04 ..........455 7702-25 ............394
754-90 ..............392
6CB21 ..............429 715004H ...........389 726502P ...........390 76215-05 ..........455 7702-50 ............394
75402-08G ........482
6CB31 ..............429 715004S1 .........389 727502P ...........390 76217-06 ..........455 7702-75 ............394
75402-10G ........482
70 xxx 715004S2 .........389 73 xxx 755-300 ............392
76218-75G ........456 7703-50 ............394
715005H ...........389 76219-75G ........456 7704-50 ............394
7003MR ............217 731101P ...........390 755-400 ............392
715005S1 .........389 76220-84G ........456 7712-02 ............394
7010MR …….....218 731102P ...........390 75501-08G ........482
715006H ...........389 76222-84G ........456 7712-03 ............394
7011MR ...........219 731103P ...........390 75501-10G ........482
715006S1 .........389 76220-07 ..........455 77121-08 ..........466
7028MR .........220 731152P ...........391 75502-08G ........482
715006T ...........389 76223-08 ..........455 7713-02 ............394
7053MR01 ......221 731502P ...........390 75502-10G ........482
715006U ...........390 76224-10 ..........455 77131-06 ..........466
7077MR ...........211 731503P ...........390 7553MR01 ........221
715007H ...........389 76226-12 ..........455 77131-08 ..........466
7081MR ...........212 731552P ...........391 7558MR ............208
715007T ...........389 76301-05 ..........455 77141-06 ..........467
7081MR01........212 734501P ...........390 7582MR ............213
715007U …..…..390 76302-05 ..........455 77141-08 ..........467
7082MR ............213 734502P ...........390 7577MR .........211

Index 12
Index ......
77328-26 ……...467 7912-23 ............348 79960-10 ..........508 833054M ...........205 84700011B …......59 853562S ...........256
77335-25 ..........467 7913-42 ............353 79960-15 ..........508 833054S ...........205 85 xxx 853563M ...........256
77340-20 ..........467 7913-4211 .........353 79960-20 ..........508 833055M ...........205 853564S ...........256
851417M ...........258
7743-56 ............395 7913A-63 ..........354 79962-10 ..........508 833058M ...........205 853565M ...........256
851419M ...........258
7744-60 ............395 7913A-6311.......354 79962-15 ..........508 833060M ...........205 853566M ...........256
851420M ...........258
7753-78 ............395 7913B-35 ..........353 79962-20 ..........508 833060S ...........205 853566S ...........256
851421M ...........258
7754-85 ............395 7913B-3511.......353 799A0-23C .......509 833063M ...........205 853568M ..........256
851422M ...........258
78 xxx 7914A-35 ..........350 799A1-23C .......509 833064S ...........205
851426S ...........258
853568S ...........256
7914A-0111.......349 799A0-33C .......509 833065M ...........205 853570M ..........256
7811-08 .............452 852421M ...........258
7914A-0111.......350 799A1-33C .......509 833067M ...........205 853570S ...........256
7811-12 .............452 853024S .........257
7914A-0111.......351 79A21-30 ……..468 833070M ...........205 853571M ...........256
7811-16 .............452 853030S .........257
7914B-45 ..........350 79A22-30 ……..468 833071M ...........205 853572S ...........256
7811-24 .............452 853032S .........257
7811-32 .............452
7914B-4521.......350 7C xxx 833072S ...........205
853036S .........257
853574S ...........256
7914C-70 ..........351 833075M ...........205 853575M ..........256
7811-40 .............452 7CA0110S …….357 853040S .........257
7914C-7021 ......351 833076S ...........205 853576S ...........256
7821-30 ............452 7CA0309S …….357 853044S .........257
7915-30 ............351 833077M ...........205 853578S ...........256
7821-50 ............452 7CA11-08 ..........359 853046S .........257
7915-3011.........351 833080M ...........205 853580M ..........256
7821-80 ............452 7CA11-10M .......359 853054S .........257
7915A-19 ..........349 833084S ...........205 853580S ...........256
7822-25 ............452 7CA11-12M .......359 853056S .........257
7915A-28 ..........349 833094S ...........205 853582S ...........256
7822-30 ............452 7CA11-12S .......359 853066S .........257
7916-0111..........352 8330A0S ...........205 853584S ...........256
7822-35 ............452 7CA11-15M .......359 853072S .........257
7822-40 ............452
7916-12M .........352
7CA11-16M .......359 84 xxx 853076S .........257
853585M ..........256
7916-15M .........352 853586S ...........256
7822-45 ............452 7CA11-16S .......359 84087637BKT ....37 853417M ...........258
7916-21M .........352 853588S ...........256
7822-50 ............452 7CA11-20S .......359 8408MP ............261 853419M ...........258
7916-22M .........352 853590M ..........256
7823-10 ............452 7CA11-24S .......359 8408MP02 ........261 853421M ...........258
7918-50 ............352 853590S ...........256
7823-15 ............452 7CA21-24S .......358 8409MP ............261 853519M ...........256
7918-5011..........352 853595M ..........256
7823-20 ............452 7CA22P01.........357 8410MP ............260 853521M ...........256
7918-A0 ............352 853592S ...........256
7833-10 ............452 7CA22P20S.......357 8410SP .............260 853522M ...........256
7918-A011.........352 853594S ...........256
7833-12 ............452 7CA23-14..........357 843524M ...........257 853523M ...........256
7921-12 ............481 853596S ...........256
7833-15 ............452 7CA23-A08S.....357 843527M ...........257 853524M ...........256
7932-04 ............435 8535A0S ...........256
7833-20 ............452 7CA23-A12S.....357 843528M ...........257 853524S ...........256
7933-45 ............435 8535A0M ..........256
7834-50 ............453 7CA23-A16S.....357 843530M ...........257 853525M ...........256
7934-45 ............435 8535A4S ...........256
7842-22 ............454 7CA23-A20S.....357 843530S ...........257 853526M ...........256
7962-03 ............462 8535A8S ...........256
7842-28 ............454 7CA23-A24S.....357 843532M ...........257 853526S ...........256
7962-04 ............462 8535B2S ...........256
7842-35 ............454 7CA23-A28S.....357 843532S ...........257 853527M ...........256
7962-06 ............462 85451735M ...…258
7842-45 ............454 7CA23-A32S.....357 843533M ...........257 853528M ...........256
7962-08 ............462 85451941M ...…258
7842-60 ............454 7CA23-A36S.....357 843534M ...........257 853528S ...........256
7962-12 ............462 85452038M ...…258
7848-60 …….....453
7962B-05 ..........462 7H xxx 843534S ...........257 853529M ...........256
85452041M ...…258
7848-80 …….....453 843535M ...........257 853530M ...........256
7962B-06 ..........462 7HA03 …….......326 85452141M ...…258
7851-08 ............454 843536M ...........257 853530S ...........256
7962B-08 ..........462 7HA03 …….......360 8572-25 ............206
7851-16 ............454 843536S ...........257 853532M ...........256
7962B-10 ..........462 7HA11 ...............360 8572DK ............206
7851-24 ............454 843538M ...........257 853532S ...........256
7851-32 ............454
7962B-35 ..........462 80 xxx 843538S ...........257 853533M ...........256
8581-26 ............206
7851-40 ............454
7963-03 ............462
8015MR ............206 843540M ...........257 853534M ...........256 87 xxx
7963-04 ............462
7851-48 ............454 801519M ...........259 843540S ...........257 853534S ...........256 870208 .............134
7963-06 ............462
7851-64 ............454 8015SR .............206 843541M ...........257 853535M ...........256 870311 ..............158
7963-08 ............462
7852-23 ............453 809622M …..….259 843542M ...........257 853536M ...........256 870406 ..............134
7963-12 ............462
7852-55 ............453 809622M19H ....259 843542S ...........257 853536S ...........256 870406 ..............158
796401MR ........463
7861-16 ............453 809622M22H ....259 843544S ...........257 853537M ...........256 870406 ..............185
79711 ...............463
7861-20 ............453 809622M24H ....259 843546M ...........257 853538M ..........256 870410 ..............185
7971-07 ............434
7861-24 ............453 809622M27H ....259 843546S ...........257 853538S ...........256 870422 ..............134
79721 ...............463
79 xxx 7976-65 ............434
809622M30H ....259 843548M ...........257 853540M ..........256 870422 ..............158
809622M32H ....259 843548S ...........257 853540S ...........256 870422 ..............185
79062-12 ..........466 79813 ................474
79063-06 ..........466 79814 ................473 82 xxx 843550M ...........257 853541M ..........256 87102 …...………21
843550S ...........257 853542M ...........256 87103 ..................21
79063-12 ..........466 79815 ................473 820001 …..…..….58
843552M ...........257 853542S ...........256 87104 ..................20
79063-20 ..........466 79830DQ ……...474 820002 …....…….58
843552S ...........257 853544M ..........256 87104 ................374
79063-40 ..........466 79831 ……….…473 820003 …....…….58
843554M ...........257 853544S ...........256 87105 ..................20
79093-02M …....465 79831-S ……….474 820011 …...……..58
843554S ...........257 853545M ...........256 87106 ..................21
79093-03C …....465 79832 ……….…473 8251-08 ............206
843555M ...........257 853546M ...........256 87106 ................511
79093-03M …....465 79832-S ….……474 8251-16 ............206
843556S ...........257 853546S ...........256 87107..................20
79093-05C …....465 79900-04 ..........506 8260-07 ............259
843558M ...........257 853548M ...........256 87108 ..................21
79093-05M …....465 79900-10 ..........506 8260-07P ..........259
843558S ...........257 853548S ...........256 87108 ................457
79093-05M1 .....465 79900-13 ..........506 8260-10 ............259
843560M ...........257 853550M ...........256 87110 ..................20
79093-08M........465 79900-20 ..........506 8260-10P ..........259
843560S ...........257 853550S ...........256 87111 ..................20
79093-08C.........465 79901-04 ..........506 8260-13 ............259
843562S ...........257 853552M ...........256 87116 ..................21
79094-02M ……465 79901-10 ..........506 8260-13P ..........259
843564S ...........257 853552S ...........256 87116 ................340
79094-03C ……465 79901-13 ..........506 827011 ….....…....59
843565M ..........257 853553M ...........256 87118 ……….......21
79094-03M ……465 79901-20 ..........506 83 xxx 843566S ...........257 853554M ...........256 87118 ……..……465
79094-05C ……465 79910-10 ..........508
833036M ...........205 843568S ...........257 853554S ...........256 87119 ..................21
79094-05C1 …..465 79910-15 ..........508
833038M ...........205 843570S ...........257 853555M ...........256 87119 ................402
79094-05M ……465 79911-10 ...........508
833041M ...........205 843570M ...........257 853556S ...........256 8711B ..................21
79094-08M .......465 79911-15 ...........508
833046M ...........205 843572S ...........257 853558M ...........256 8711B ................456
79094-08C .......465 79912-10 ..........508
833046S ...........205 847000 ……….....59 853558S ...........256 8711B-1 ............456
7911-12 .............481 79912-15 ..........508
833048S ...........205 84700002B …......59 853560M ...........256 87137 ..................55
7912-21 ............348 79953-10 ..........508
833050M ..........205 84700003B …......59 853560S ...........256 87140 ..................21
7912-22 ............348 79953-15 ..........508

Index 13
 Index ......
87152 .................20 87502-01 ............50 87D11-15A-KG ...35 9-22308PR .......106 9-4427MP .........111 9-94435MP .......110
87153 .................20 87502-02 ............50 87D11-16A-B ......35 9-2526MR .........107 9-4435MP .........113 90 xxx
87160 ..................20 87502-05 ............50 87D11-16A-G .....35 9-2544SRV .........78 9-4516MR ..........97
901-068MR .........88
87160 ................475 87502-06 ............50 87D11-17A-KB ...31 9-2548CR ...........95 9-4522MR ...........97
901-069MR .........88
8720 ..................134 87502-050 ..........47 87D11-17A-KG ...31 9-2548CR01 .......95 9-4526MR ...........94
901-073MR .........88
87201 ..................52 87502-050 ..........49 87D11-18A-KB ...31 9-2548CRV .........69 9-4527MRV02 .....75
902-062MR .........91
87203..................20 87502-050 ..........50 87D11-18A-KG ...31 9-2548MRV .........78 9-4537MRV ........75
902-065MR .........91
8730 ..................158 87502-051 ..........47 87D11A-KB ........29 9-2550MRV .........74 9-4557MR ...….111
902-068MR .........91
87301 ..................20 87502-051 ..........49 87D11A-KG ........29 9-2553MRV .........79 9-4827MP .........111
902-084MR01 .....91
87301-494A ........20 87502-051 ..........50 87D11X01SA-KB...25 9-2565MRV ........73 9-5575MR ..........99
902-084SR .........92
87301-496A ........20 87502-054 ..........50 87D11X01SA-KG...25 9-30106MR .......117 9-6010MR .........118
902-089MR01 .....92
87301-498A ........20 87502-058 ..........50 87D11X02SA-KB...26 9-30110CR ........106 9-6010MR01......118
902-103MR .........92
87301-499A ….…20 87502-061 ..........47 87D11X02SA-KG...26 9-30206MR .......117 9-6314MRV ….....71
902-109MR .........92
87352 ..................21 87502-061 ..........49 87D11X03A-KB ..27 9-30208MRV........77 9-6414MP .........114
902-132CR .........93
87352 ................383 87502-064 ..........50 87D11X03A-KG ..27 9-30216MRV .......80 9-6414SP .........114
902-164MR .........91
8740 ..................185 87502-068 ..........50 87D11X04A-KB ..28 9-3023MR01.......98 9-7069CR ...........94
90217PQ ..........423
87401-2 ..............54 87502-11 ............50 87D11X04A-KG ..28 9-30904AY ........112 9-7069CR01 .......94
90217PQ01 ......423
87401-3 ..............54 87502-12 ............50 87D11X05A-KB ..28 9-30904AY ........630 9-7069CRV .........68
90217PQ02 ......423
87401-3H ............54 87502-051 ..........50 87D11X05A-KG ..28 9-31006MR .......115 9-7078CR ...........94
90217PQ03 ......423
87402 ..................55 87502P01 ...........51 88 xxx 9-31106MR .......109 9-7078CR01 .......94
9033CR ............209
87404 ..................55 87502P02 ...........50 9-31124MRV ......71 9-7128PR .........111
8816 ..................206 90337MR …...…210
87407 ..................55 87502P03 ...........50 9-31110MR .......106 9-7537MR ….......99
883524M ...........258 9035CR ............209
87408 ..................55 87502P011 .........51 9-31110MRV........77 9-7540MR ...........99
883527M ...........258 90401 ................242
87411-6B ............53 87502P012 .........51 9-31909PR .......107 9-7560MRV01 .....76
883529M ..........258 90402 ................242
87411-9B ............53 87502P90 ...........51 9-31919MR .......110 9-7576MR .........110
883530M ...........258 90403 ................253
87412-4B ............53 87502P91 ...........51 9-34128FR ........107 9-9003MRV01 .....71
883532M ...........258 9043MR ............222
87412-6B ............53 87512 ……...…....52 9-3523MR ..........98 9-90103PP ........105
883533M ...........258 90404 ................253
87417-10B ..........53 87512P01 ...........52 9-3523MRV10 .....79 9-90103PP01 ....105
883534M ...........258 90405 ................253
87419-5B …….....53 87512P02 ...........52 9-3544MRV ........75 9-90103PP02 ....105
883535M ...........258 90405 ................260
87421-3B ............54 87512P03 ...........52 9-3602MR .........112 9-90103RR .......105
883536M ...........258 90406 ................260
87430A ...............49 87632-5B ............43 9-3612MR .........112 9-90104GP .......115
883538M ...........258 90408 ................229
87430A-K ............49 87634-7B ............43 9-40102GP .........95 9-90106SR .......106
883541M ...........258 90409 ................229
87430A1 .............49 87711C ...............56 9-40102GPV .......69 9-90109MN .......104
8866 ..................259 90601 ................242
87430A1-K ..........49 87721B ...............56 9-40103GP .......109 9-90111MR .......118
8866P ...............259 90602 ................242
87430A2 .............49 87722B ...............56 9-40104GPV .......80 9-90113MA ........115
8869 .................260 90603 ................253
87430A2-K ..........49 8779-32F ..........206 9-40112GPV .......69 9-90114MR .......112
8869P ...............260 90604 ................253
87430A4 .............49 8779DK .............206 9-40113GPV .......80 9-90115MR .......117
87430A4-K .........49 87934-31 ............45 9- xxx 9-40122GPV .......69 9-90118PRV .......80
90605 ................260
90606 ................260
87431-5BE .........40 87934-32 ............45 9-1011GP .........113 9-40203GP .......117 9-90119MRV .......76
90607 ................253
87432-15 ............37 87934-7B ............45 9-10112MR .......108 9-4026MR02 .......94 9-90120MR .......117
90608 ................229
87432-17 ............37 87934-7B-B ........45 9-10115MR .......103 9-40207GP .......104 9-90121MR .......115
90609 ................229
87432-23 ............37 87934-7B-G ........45 9-10212MR .......108 9-40207GP01 ...104 9-90125MR .......117
9063MR ............210
87432-24 ............37 87934-7BF ..........45 9-10215MR .......103 9-4029CR .........118 9-90126MR .......115
9063MR01 ........210
87432-31 ............37 87934-7BF-B ......45 9-1112MRV .........76 9-4057MR ….....111 9-90128SR .........95
908-077CR .........93
87432-32 ............37 87934-7BF-G ......45 9-1205MR ……..100 9-40604GP .......104 9-90129CR .........96
87432-33 ............37 8797 ..................259 9-12110MR .......112 9-4116FR ..........116 9-90129CRV .......70 91 xxx
87432-34 ............37 8797P ...............259 9-12120MR .......103 9-4116FR03 ......116 9-90131MR .......100 91038MY01 ......423
87432-41 ............37 87D11-01A-KB ...31 9-1215MR03 .....118 9-4119PR ..........108 9-90135MRV ......79 911-000CR ..........89
87432-52 ............37 87D11-01A-KG ...31 9-1216MR .........100 9-4120PR .........108 9-90138CR .........96 911-000CR02 ......89
87432-5B ............39 87D11-02A-KB ...30 9-1216MR01 .....100 9-4128FR ..........109 9-90145CRV .......70 911-000CRV .......66
87432-5G ...........41 87D11-02A-KG ...30 9-1216MR03 .....100 9-4129PRV .........74 9-90154CR .........97 911-002CR ..........89
87434-7B ............39 87D11-03A-KB ...32 9-1217MR .........117 9-4138PR .........111 9-90154CR01 .....97 911-003CR ..........90
87434-7G ............41 87D11-03A-KG ...32 9-1218MR .........101 9-4143FRV .........74 9-90205GN .......105 911-003CR01 …..90
87435-13B ..........40 87D11-04A-KB ...32 9-1219MR01 .....101 9-4147PRV .........79 9-90205GN01 ...105 911-004CRV .......66
87437-8B ............39 87D11-04A-KG ...32 9-1220MRV .........76 9-4156PR .........118 9-90217GRV ......72 91162MR ..........313
87437-10B...........39 87D11-05A-KB ...32 9-1272MR .........101 9-42102GPV ......69 9-90220MR .........96 91168MR ..........313
87438-3B ............39 87D11-05A-KG ...32 9-1282MR .........101 9-42114GP .........95 9-90220MR01 .....96 91230 ................416
87439-7B ............40 87D11-06A-B ......33 9-1303MR .........108 9-42114GPV .......69 9-90305TQV .......80 91232 ................374
8743x-xB ………..36 87D11-06A-G .....33 9-1606MR .........116 9-42144GP .......105 9-90310MR .......107 91262MR ..........313
8743x-xB-B ……..36 87D11-07A-B ......33 9-1606MR01 .....116 9-4219MR .........116 9-90315MR .......102 91268MR ..........313
8743x-xB-BK …...36 87D11-07A-G .....33 9-1608MR .........101 9-4219MR07 .....116 9-90329CR .........96 91333MQ ..........223
8743x-xB-G ........36 87D11-071A-B ...33 9-1609MR .........102 9-4219SR08 .....116 9-90408TQ ........110 91431 ..................20
8743x-xB-K ……..36 87D11-071A-G ...33 9-1709MR .........102 9-4235MR …..…113 9-9040SRV .........75 91431 ................454
8743x-xB-OK …..36 87D11-08A ..........34 9-1711MR .........102 9-4319MR .........116 9-90413TQV .......73 91432 ..................20
8743x-xB-RK …...36 87D11-08SA .......34 9-1716MR .........117 9-4319MR01 .....116 9-9077CRV .........68 91451-01A ..........21
87440..................47 87D11-09A ..........34 9-1812MR .........102 9-4319MR02 .....116 9-91016MR .......113 91451-01A ........511
87441-1B ............46 87D11-09SA .......34 9-1838MR .........103 9-4319MR05 .....116 9-91024MR50 ...100 91451-01B ..........21
87441-3B ............46 87D11-11A-KB ...33 9-1905MR .........103 9-4328MR ...........98 9-91026PR .......108 91451-01B ........511
87442-16-K .........48 87D11-11A-KG ...33 9-1905MR .........302 9-4333MR ...........98 9-91120MR .......104 91451-01F .........511
87442-36 ............48 87D11-12A-KB ...33 9-1912MR .........102 9-4333MR03 .......98 9-91122MRV .......72 91522H ............454
87442-3B ............48 87D11-12A-KG ...33 9-1C08MR ........103 9-4335MR ……..113 9-91124MRV ......72 91528H ............454
87452A-B............60 87D11-13A-KB ..35 9-20110MR .......109 9-4338MR .........114 9-91126SRV .......70 91535H ............454
87452A1-B..........60 87D11-13A-KG ...35 9-2044SRV .........78 9-4338MR01 .....114 9-91131MRV .......70 91545H ............454
87452B-B............60 87D11-15A-KB ...35 9-2048MRV .........78 9-4338MR03 .....114 9-91190CRV .......77 91560S ............454
87452C-B............60 87D11-14A ..........35 9-22108MR .......106 9-4401MPV .........79 9-91217MRV .......73 91522S ............454
87502 .................51 87D11-14SA .......35 9-22108MRV .......77 9-44214GPV .......80 9-93523MR .........99 91528S ............454

Index 14
Index ......
91535S ............454 953580M ..........262 9634-001MR-G ...87 9934F-011MRV-B....64 9AE6-6514 ........569 9AT1003E .........515
91545S ............454 953580S ………262 9634-008MR .......86 9934F-011MRV-G...64 9AE6-6514A .....566 9AT1004E .........542
91560S ............454 953582S ………262 9634-008MR-B ...86 9934F-235MRV ......62 9AE6-6567 ........567 9AT1004E .........550
919-001CRV .......67 953584S ………262 9634-008MR-G ...86 9934F-235MRV-B...62 9AE6-6567 ........569 9AT1005E .........533
9634-009MR .......82 9AE6-6606 ........569
92 xxx 953585M ...........262
9634-009MR-B ...82
9934F-235MRV-G...62
9AE6-6814 ........569
9AT1005E .........537
92543MR ..........223
953586S ………262
9634-009MR-G ...82
9A xxx 9AE6-7314 .......569
9AT1005E .........555
953588S ………262 9AT1006E .........543
92543MR01 ......223 9634-010MR .......83 9AA01 …....……562 9AE6-7414 .......566
953590M ...........262 9AT1008E .........516
9260-13 ............261 9634-010MR-B ...63 9AA11 ...............559 9AE6-7415 ........569
953590S ………262 9AT1009E .........517
9260-13P ..........261 9634-010MR-B..514 9AA13 ...............559 9AE6-7476 ........569
953592S ………262 9AT1010E …….521
93 xxx 953594S ………262 9634-010MR-G ...63 9AA15 ...............561 9AE6-7577 ........569 9AT1010E …….526
9634-010MR-G..514 9AA16 ...............559 9AE6-7608 ........569
932-000MR .........85 953595M ...........262 9AT1012E .........544
9634-010MRV .....63 9AA17 ...............560 9AE6-7612 ........569
932-000MRD ......85 953596S ………262 9AT1016E .........525
9634-010MRV ...514 9AA21 ...............560 9AE6-7614 ........569
932-000MR-G .....85 953598S ………262 9AT1018E .........516
9634-011MRV .....64 9AA25 ...............561 9AE6-7630 ........569
932-000MR-B .....85 9535A0M ..........262 9AT1021E ........526
9634-011MRV-B..64 9AA31 ...............560 9AE6-7815 ........569
932-008MR .........86 9535A0S ...........262 9AT1102E .........518
9634-011MRV-G..64 9AA32 ...............560 9AE6-8015 ........569
932-008MRD ......86 9535A2S ...........262 9AT1103E .........543
9634-235MRV .....62 9AB11 ...............562 9AE6-8082 ........569
932-008MR-G .....86 9535A4S ...........262 9AT1104E .........545
9634-235MRV-B..62 9AB12 ..............562 9AE6-8414 .......566
932-008MR-B .....86 9535A5M ..........262 9AT1105E .........532
9634-235MRV-G.62 9AC125-32 .......562 9AE6-8616 ........569
932-009MR .........82 9535A6S ...........262 9AT1106E .........518
9641-101MR .......84 9AC125-40 .......562 9AE6-8618 ........569
932-009MRD ......82 9535A8S ...........262 9AT1108E .........522
9644-101MR ......84 9AC175-32 .......562 9AE6-9015 ........569
932-009MR-B .....82 9535B0M ..........262 9AT1112E .........519
9AC175-40 .......562
932-009MR-G .....82 9535B0S ...........262 98 xxx 9AC175-66 .......562
9AE6-9210 ........569 9AT1202 ...........551
932-010MR .........83 9535B2S ...........262 9AE6-9315 ........569 9AT1202 ...........524
9868 ..................261 9AD11 ...............563
932-010MRD ......83 9535B4S ...........262 9AE6-9336 ........569 9AT1206E .........520
9868P ...............261 9AE1-6414 .......566
932-010MR-B .....83 9535B5M ..........262 9AE6-9345 ........569 9AT1303E .........519
932-010MR-G .....83 9535B6S ...........262 99 xxx 9AE2002 ...........567 9AE6-9515 .......569 9AT1306E .........545
9934-000MR .......85 9AE2004 ...........567 9AE6-9618 ........569
934-001MR .........87 9535B8S ...........262 9AT1406E .........531
9934-000MR-B ...85 9AE2016 ...........568 9AE6-9915 .......566
934-001MRD ......87 9535C0M ..........262 9AT1506E .........546
9934-000MR-G ...85 9AE2-10615 ......568 9AE6-10015 ......569
934-001MR-B .....87 9535C0S ...........262 9AT1606E .........525
9934-001MR .......87 9AE2-10815 ......568 9AE6-10615 ......569
934-001MR-G .....87 9535C2S ...........262 9AT1706E .........522
9934-001MR-B ...87 9AE2-10818 ......568 9AE6-10815 ......569
934-010MRV .......63 9535C4S ...........262 9AT1-A01 ..........548
9934-001MR-G ...87 9AE2-6514 ........567 9AE6-10818 ......569
934-010MRV .....514 9535C5M ..........262 9AT1-A02 ..........524
9934-008MR .......86 9AE2-6567 ........567 9AE71-90 …..…572
934-010MRVD........63 9535C6S ...........262 9AT1-A03 ..........538
9934-008MR-B ...86 9AE2-6606 ........567 9AE71-115 ....…572
934-010MRVD......514 9535C8S ...........262 9AT1-A04 ..........548
9934-008MR-G ...86 9AE2-6606 ........568 9AE71-140 ....…572
934-010MRV-B........63 9535D0M ..........262 9AT1-E01 ..........530
9934-009MR .......82 9AE2-7476 ........568 9AE72 ...............572
934-010MRV-B......514 9535D0S ...........262 9AT1-E01 ..........535
9934-009MR-B ...82 9AE2-7608 ........567 9AE8006 …...….570
934-010MRV-G ......63 9535D2S ...........262 9AT2004E .........542
9934-009MR-G ...82 9AE2-7608 ........568 9AE8-24 ……....570
934-010MRV-G.....514 9535D4S ...........262 9AT2004E .........551
9934-010MR ......83 9AE2-7612 ........568 9AE8-27 ……....570
934-011MRV............64 9535D5M ..........262 9AT2005E .........541
9934-010MR-B ...83 9AE2-7614 ........567 9AE8-30 ……....570
934-011MRVD.........64 9535D6S ...........262 9AT2005E .........552
9934-010MR-G ...83 9AE2-7614 ........568 9AE8-32 ……....570
934-011MRV-B........64 9535D8S ...........262 9AT2006E .........515
9934-010MRV .....63 9AE2-8616 ........568 9AE8-36 ……....570
934-011MRV-G.......64 9535E0M ..........262 9AT2006E .........529
9934-010MRV ...514 9AE2-8618 ........568 9AE8-38 ……....570
934-235MRV...........62 9535E0S ...........262 9AT2006E .........535
9934-010MRV-B......63 9AE2-9210 ........568 9AF11-15 ..........572
934-235MRVD........62 9535E2S ...........262 9AT2007E .........520
9934-010MRV-B....514 9AE2-9315 ........568 9AF11-30 ..........572
934-235MRV-B........62 9535E4S ...........262 9AT2007E .........536
9934-010MRV-G...514 9AE2-9315 ........567 9AF11-60 ..........572
934-235MRV-G.......62 9535E8S ...........262 9AT2007E .........541
9934-010MRV-G...63 9AE2-9345 ......568 9AF113 .............572
935-525CRVD ....65 9535F0M ..........262 9AT2007E .........552
9934-011MRV ........64 9AE2-9618 ........568 9AF204 .............573
94 xxx 9535F2S ...........262
9934-011MRV-B......64 9AE221 .............568 9AG11 ...............573
9AT2008E .........538
9535F6S ...........262 9AT2008E .........540
941-101MRD ......84 9934-011MRV-G.....64 9AE221 .............569 9AG12 .............573
9535G0S ..........262 9AT2008E .........553
941-101MR ….…84 9934-235MRV.........62 9AE221 .............571 9AG13 ..............573
9535G4S ..........262 9AT2011E .........531
9415GR ............177 9934-235MRV-B......62 9AE31-73 ..........563 9AH12 ..............574
9535G8S ..........262 9AT2012E .........547
95 xxx 9535J2S ...........262 9934-235MRV-G.....62 9AE31-85 ..........563 9AH025 .............574 9AT2026E .........527
9934F-000MR .....85 9AE31-95 ..........563 9AH0311 ...........575
953532M ...........262 9543MR ............222 9AT2106E .........521
9934F-000MR-B....85 9AE31-111 ........563 9AH0321 ..........575
953533M ...........262 9563MR ............210 9AT2106E .........536
9934F-000MR-G.....85 9AE31-121 ........563 9AH12 ..............574
953534M ...........262 9563MR01 ........210 9AT2106E .........553
9934F-001MR ........87 9AE31-134 ........563 9AH31 .............574
953536M ...........262 96 xxx 9934F-001MR-B....87 9AE32-110 ........563 9AJ017 .............576
9AT2107E ……..523
953538M ...........262 9AT2-A01 ........527
9632-000MR .......85 9934F-001MR-G.....87 9AE32-155 ........563 9AJ3122 ...........575
953541M ...........262 9AT2-A01 ........530
9632-000MR-B ...85 9934F-008MR ........86 9AE33-110 …….564 9AJ4322 ...........575
953542M ...........262 9AT2-A01 ........534
9632-000MR-G ...85 9934F-008MR-B.....86 9AE33-110-S ....564 9AK11 ...............576
953546M ...........262 9AT2-A01 ........539
9632-008MR .......86 9934F-008MR-G.....86 9AE33-155 ……564 9AK21 ...............576
953550M ...........262 9AT2-A01 ........554
9632-008MR-B ...86 9934F-009MR ........82 9AE33-155-S ....564 9AL11 ...............577
953555M ...........262 9AT2-C01 ........549
9632-008MR-G ...86 9934F-009MR-B.....82 9AE42 ...............571 9AL12 ...............577
953560M ...........262 9AT2-C01 ........532
9632-009MR ......82 9934F-009MR-G.....82 9AE423 .............568 9AM010 ............577
953564S ………262 9AT2-D01 ..........524
9632-009MR-B ...82 9934F-010MR ........83 9AE423 .............571 9AM011 ............577
953565M ..........262 9AT2-D01 ..........537
9632-009MR-G ...82 9934F-010MR-B.....83 9AE43 …...........571 9AM012 ............577
953566S ………262 9AT2-D01 ..........554
9632-010MR .......83 9934F-010MR-G.....83 9AE433 .............569 9AN021 ............574
953568S ………262 9AT2-E01 ..........555
9632-010MR-B ...83 9934F-010MRV ......63 9AE433 .............571 9AR11 ...............578
953570M ...........262 9AT3-A01 ..........555
9632-010MR-G ...83 9934F-010MRV ....514 9AE52 ...............571 9AP100 .............577
953570S ………262 9AT3-A02 ..........556
9634-000MR .......85 9934F-010MRV-B...63 9AE53-115 ........571 9AP120 .............577
953572S ………262 9AT3-A03 ..........539
9634-000MR-B ...85 9934F-010MRV-B.514 9AE53-80 ..........571 9AP160 .............577
953574S ………262 9AT3-A04 .........556
9634-000MR-G ...85 9934F-010MRV-G...63 9AE6002 ...........567 9AS11 …............578
953575M ..........262 9AT3-B01 ..........557
9634-001MR .......87 9934F-010MRV-G.514 9AE6030 ...........569 9AT1002E .........550
953576S ………262 9AT3-F01 ..........557
9634-001MR-B ...87 9934F-011MRV.......64 9AE6-6514 ........567 9AT1002E .........528
953578S ………262 9AT3-F02 ..........557

Index 15
 Index ......
9AT3-E01 ..........534 9BM2211A ........507 9CI1101 ............616 9HBE4-62 .........595 9TD403-21M .....477 A535075M ........263
9AT3-E02 ..........528 9BM2211A ........603 9CI1102 ............616 9HBE4-67 .........595 9TD403-21M .....628 A535076M ........263
9AT3-E02 ..........531 9BP11 ...............591 9CI1103 ............616 9HBE81 ............596 9TD403-22M .....172 A535076S .........263
9AT3-E02 ..........540 9BQ01 ..............610 9CI1201 ...........616 9HBL ................602 9TD403-22M .....477 A535077M ........263
9AW4901 ..........579 9BQ11 ..............610 9CI1202 ...........616 9HBL11-05 .......602 9TD403-22M .....628 A535078S .........263
9AW4901 ..........171 9BT250 .............610 9CI1203 ...........616 9HBL12-05 .......602 9TD403-23M .....172 A535080M ........263
9AW4911 ..........579 9BU11 ...............608 9CJ013 .............614 9HBN01 ............597 9TD403-23M .....477 A535080S .........263
9AW4911 ..........171 9BU11T .............608 9CJ023 .............614 9T xxx 9TD403-23M .....628 A535082S .........263
9B xxx 9BU111 .............608 9CJ033 .............615
9TA24A .............469
9TD403-27M .....172 A535084S .........263
9BU111T ...........608 9CJ1112 ............614 9TD403-27M .....477 A535085M ........263
9BA01 ..............587 9TA24B .............469
9BU112 .............608 9CJ1120 ............614 9TD403-27M .....628 A535086M ........263
9BA02 ..............587 9TA24D .............469
9BU112T ...........608 9CJ1130 ............614 9TE11 .................47 A535088S .........263
9BA03 ..............587 9TA25A .............471
9BU14 ...............608 9CJ2112 ............614 9TE11 .................49 A535090M ........263
9BA11 ...............586 9TA25B .............471
9BU14T .............608 9CJ2120 ...........614 9TE11 ...............474 A535090S .........263
9BA21 ...............586 9TA25D .............471
9BU141 .............608 9CJ2212 ...........614 9TE21 .................21 A535094S .........263
9BA22 ...............586 9TA26A .............470
9BU141T ...........608 9CJ3104 ...........615 9TE21 .................47 A535095M ........263
9BA31 ..............588 9TA26A-S .........470
9BU142 .............608 9CJ3105 ...........615 9TE21 .................49 A535096S .........263
9BA32 ..............588 9TA26B .............470
9BU142T ...........608 9CJ3106 ...........615 9TE21 ...............326 A535100M ........263
9BA33 ..............588 9TA26D .............470
9BU15 ...............608 9CJ61-40 ..........615 9TE31 .................21 A535100S .........263
9BA41 ..............588 9TA27 ...............469
9BU151 .............608 9CK-101 ...........625 9TE31 .................47 A535105M ........263
9BB11 ...............590 9TA28 ...............472
9BU151T ...........608 9CK-102 ...........625 9TE31 .................49 A535108S .........263
9BB12 ...............590 9TA31A .............471
9BU15T .............608 9CM01 ..............613 9TE31 ...............511 A535110M .........263
9BB13 ...............590 9TA31B .............471
9BU152 .............608 9CM209 ............613 9TE41 .................20 A535112S .........263
9BB31 ...............590 9TA42A ...........472
9BU152T ...........608 9CM212 ............613 9TE41 ...............240 A535115M .........263
9BC11 ...............591 9TA42B ...........472
9BU2 .................609 9CW01 ..............617 9TG11 ...............635 A535120M ........263
9BC121 .............591 9TB225 .............626
9BU241 ............609 9CW21 ..............617 9TG12 ...............635 A535120S .........263
9BC122 .............591 9TB500 .............626
9BU242 ............609 9CW22 ..............617 9TG21 ...............635 A535124S .........263
9BC124 .............591 9TBA650 ...........627
9BU251 ............609 9CZ101 ............626 9TH21XL.….......474 A535125M ........263
9BC21 ...............592 9TC101 .............627
9BC22 ...............592
9BU252 ............609 9D xxx 9TD014MR .......172
9TH21XL.….......511 A535126S .........263
9BU2T ..............609 9TH31-XL .........474 A535130M ........263
9BC23 ...............592 9DA022 .............618 9TD014MR .......627
9BU241T ..........609 9TH31-XL .….....511 A535132S .........263
9BC24A ............593 9DA103 ............618 9TD014MR .......478
9BU242T ..........609 9TH31-2L.…......474 A535135M ........263
9BC25 ...............593 9DA104 ............618 9TD034MR .......172
9BU251T ..........609 9TH31-2L.…......511 A535136S .........263
9BC31 ..............593 9DB201 .............618 9TD034MR .......477
9BU252T ..........609 9TK014 .............629 A535138S .........263
9BE11 ...............594 9DC22 ..............619 9TD034MR .......628
9BU41 ..............609 9TK024 ..........629 A535140M ........263
9BE21 ...............594 9DC23 ..............619 9TD035MR .......172
9BU8109 ..........506 9TK108 .............629 A535144S .........263
9BE4 .................595 9DC242 ............620 9TD035MR .......477
9BU8109 ..........609 9TK112 .............629 A535145M ........263
9BE41 ...............595 9DC243 ............620 9TD035MR .......628
9BU8112 ..........506 9TK118 .............629 A535148S .........263
9BE42 ...............595 9DD21 .............621 9TD036MR .......172
9BU8112 ..........609 9TK124 .............629 A535150M ........263
9BE43 ...............595 9DH11 .............621 9TD036MR .......477
9BU8209 ..........506 9TK225A ..........629 A535155M ........263
9BE44 ...............595 9DM1361 ..........426 9TD036MR .......628
9BU8209 ..........609 9TK225B ..........629 A535156S .........263
9BE45 ...............595 9DM1381 ..........427 9TD062 .............477
9BU8212 ..........506 9TK236A ..........629 A535160M ........263
9BE52 ...............597 9DM1A1 ............621 9TD062 .............628
9BU8212 ..........609 9TK236B ..........629 A535160S .........263
9BE62 ...............597 9DM2351 ..........427 9TD064 .............477
9BV1410 ...........505 9TP11 ...............636 A535164S .........263
9BE63 ...............597 9DN12 ..............428 9TD064 .............628
9BV1410T ........506 9TP12 ...............636 A535165M ........263
9BF11 ...............598 9DP1101 ...........622 9TD401-06M .....172
9BV1420 ...........505 9TP22 ...............636 A535168S .........263
9BF21 ...............598 9DP130 .............622 9TD401-06M .....478
9BV1420T ........506 9TQ01 ...............633 A535170M ........263
9BF31 ...............598 9DP1301 ...........622 9TD401-06M .....627
9BV1411 ...........505 9TQ03 ...............626 A535172S .........263
9BG11 ...............599 9DP1302 ...........622 9TD401-08M .....172
9BV1411T .........506 9TQ31 ...............626 A535175M ........263
9BJ11 ................599 9DP2301 ...........623 9TD401-08M .....478
9BV1421 ...........505 9TT21-03 ..........637 A535180M ........263
9BK11 ...............599 9DP3201 ...........623 9TD401-08M .....627
9BV1421T ........506 9TT11-18 ..........637 A535180S .........263
9BK2008 ..........600 9DS11-16 ..........624 9TD401-10M .....172
9BW0120 ..........604 9TU11-20 ..........639 A535184S .........263
9BK31 ..............600 9DS11-16A ........624 9TD401-10M .....478
9BW0123 ..........604 9TU21-20 ..........639 A535185M ........263
9BK32 ..............600 9DS11-16B .......624 9TD401-10M .....627
9BW0220 ..........604 9TV12-02 ..........638 A535188S .........263
9BK41 ...............600 9DS11-16D .......624 9TD401-12M .....172
9BW0221 ..........604 9TV12-020 ........638 A535190M ........263
9BK41-20 ..........600 9DT11 ...............625 9TD401-12M .....478
9BW4501 ..........606 9TV12-021 ........638 A535192S .........263
9BK41-28 ..........600 9DT11E .............625 9TD401-12M .....627
9BW4502 ..........606 9TV13 ...............638 A535196S .........263
9BK41-38 ..........600 9DT11-1 ............625 9TD403-10M .....172
9BW4801 ..........606 9TV13-100 ........638 A535200M ........263
9BK41-53 ..........600 9DT11-2 ............625 9TD403-10M .....477
9BK41-73 .........601 9C xxx 9DT11-3 ............625 9TD403-10M .....628
9TV21-09 ..........638
9TW21 ..............639
A535200S .........263
A535204S .........263
9BK51 ………....601 9CF-107 ............612 9DT11-4 ............625 9TD403-12M .....172
9TZ11-04 ..........475 A535208S .........263
9BM120 ............602 9CF110 .............611 9DT11-5 ............625 9TD403-12M .....477
9TZ11-05 ..........475 A535210M ........263
9BM2-01 ...........507 9CF120 .............611 9DT11-6 ............625 9TD403-12M .....628
9TZ11-06 ..........475 A535212S .........263
9BM2-01 ...........603 9CF130 .............611 9DT11-7 ............625 9TD403-13M .....172
9TZ11-08 ..........475 A535215M ........263
9BM2-02 ...........507 9CF131 .............611 9DT11-8 ............625 9TD403-13M .....477
9TZ11-10 ..........475 A535216S .........263
9BM2-02 ...........603 9CF132 .............611 9DT11-9 ............625 9TD403-13M .....628
9BM2110 .........507 9CF-207 ............612 9DT11-10 ..........625 9TD403-14M .....172 A5 xxx A535220S .........263
A535224S .........263
9BM2110 .........603 9CF210 .............612 9DT11-11 ..........625 9TD403-14M .....477 A535041M ........263
A535225M ........263
9BM2111 .........507 9CF220 .............612 9DT11-12 ..........625 9TD403-14M .....628 A535046M ........263
A535235M ........263
9BM2111 .........603 9CF230 .............612 9H xxx 9TD403-17M .....172 A535050M ........263
A535240S .........263
9BM2210 .........507 9CF240 .............612 9TD403-17M .....477 A535051M ........263
9HBE083 ..........596 A535244S .........263
9BM2210 .........603 9CF241 .............612 9TD403-17M .....628 A535055M ........263
9HBE4 ..............595 A535252S .........263
9BM2210A ........507 9CF-307 ............612 9TD403-19M .....172 A535057M ........263
9HBE4-30 .........595 A535256S .........263
9BM2210A ........603 9CH01 ..............613 9TD403-19M .....477 A535060M ........263
9BM2211 .........507 9CH212 ............613
9HBE4-39 .........595
9TD403-19M .....628 A535065M ........263 AD xxx
9HBE4-47 .........595
9BM2211 .........603 9CI016 .............616 9TD403-21M .....172 A535070M ........263 ADCV-01 .............19
9HBE4-58 .........595

Index 16
Index ......
ADCV-02 .............19 SC7510MR .......646 ZS111-2L ............18
ADFLAG .............19 SC7583MR .......644 ZS111-3L ............18
ADFLAG1 ...........19 SC7596MR .......645 ZS111A-S ...........18
ADFLAG2 ...........19 SC9043MR .......647 ZS111A-L ...........18
ADSTK21KT .......19 SC9043MR01 ...647 ZS111A-XL ..........18
ADSTK22KT .......19 SC9543MR .......648 ZS111A-2L ..........18
ADSTK23KT .......19 SC9543MR01 ...648 ZS111A-3L ..........18
ADSTK-C1 .........19 ST xxx ZS112-L ..............18
ADSTK-H1 .........19 ZS112-XL ............18
ST20109MR .....642
B5 xxx ST20120MR .....642
ZS112-2L ............18
ZS112-3L ............18
B535105M ........264 ST20207MY ......641
ZS116 .................19
B535110M ........264 ST20139MY ......642
ZS119 .................19
B535115M ........264 ST20139SY ......642
ZS120-S..............19
B535120M ........264 ST20208MY .....641
ZS141-S .............18
B535125M ........264 ST20209MR .....641
ZS141-M .............18
B535130M ........264 ST20213MR .....641
ZS141-L .............18
B535132S .........264 ST20219MR .....641
ZS141-XL ............18
B535135M ........264 ST20219MY .....641
ZS141-2L ............18
B535136S .........264 ST20219SY ......641
ZS141-3L ............18
B535140M ........264 ST20219MY1 ....641
ZS142B-S ...........18
B535140S .........264 ST20220MR .....642
ZS142B-M ..........18
B535144S .........264 ST20407PR ......642
ZS142B-L ...........18
B535145M ........264 ST20419PR ......642
ZS142B-XL .........18
B535148S .........264 ST2346MR …....643
ZS142B-2L ..........18
B535150M ........264 ST4028MR .......643
ZS142G-S ...........18
B535152S .........264 ST4528MR .......643
ZS142G-M ..........18
B535156S .........264 ST87432-5B .....649
ZS142G-L ...........18
B535160M ........264 ST87434-7B .....649
ZS142G-XL .........18
B535160S .........264 SY xxx ZS142G-2L .........18
B535164S .........264
SY-210H ...........510 ZS142W-S ..........18
B535165M ........264
SY-210M ...........510 ZS142W-M ..........18
B535168S .........264
SY-211F ...........510 ZS142W-L ..........18
B535170M ........264
SY-211H ...........510 ZS142W-XL ........18
B535172S .........264
SY-211M ...........510 ZS142W-2L ........18
B535175M ........264
SY-220H ...........510 ZS306 .................18
B535176S ........264
SY-221H ...........510 ZS402 .................18
B535180M ........264
SY-221M ...........510 ZS403 .................18
B535180S ........264
SY-221F ...........510 ZS405 .................18
B535184S ........264
SY-230M ...........510 ZS408 .................18
B535185M ........264
SY-231M ...........510 ZS409 .................18
B535188S ........264
SY-231F ...........510 ZS410 .................18
B535190M ........264
SY-260M ...........510 ZS411 .................18
B535192S ........264
SY-310H ...........510 ZS510 .................18
B535196S ........264
SY-311H ...........510 ZS511 .................19
B535200M ........264
SY-320H ...........510 ZS512 .................18
B535200S .........264
SY-321H ...........510 ZS516..................19
B535204S .........264
SY-410H ...........510 ZS520 .................19
B535208S .........264
SY-411H ...........510 ZS521 .................19
B535210M ........264
B535212S .........264 WS xxx ZS522 .................19
ZS524 .................19
B535215M ........264 WSB01 .............605
ZS529 .................19
B535216S .........264 WSB012802-5...605
ZS530 .................19
B535220S .........264 WSB013006-5 ..605
ZS533 .................19
B535224S .........264 WSB02 .............605
ZS539..................19
B535225M ........264 WSB022701-5 ..605
B535228S .........264 WSN04 .............605 ZV xxx
B535232S .........264 WSN043601-5 ..605 ZV011 ...............287
B535235M ........264 WSN043602-5 ..605 ZV011A .............287
B535236S ........264 WSN14 .............605 ZV011B .............287
B535240S ........264 WSN143601-5 ..605 ZV011D .............287
B535244S ........264 WSN143602-5 ..605 ZV012 ...............287
B535248S ........264 ZS xxx ZV012A .............287
B535252S ........264 ZV012B ............287
ZS104 .................18
B535256S ........264 ZV012D ............287
ZS105 .................18
B535260S ........264 ZV013 ...............287
ZS106 .................18
B535264S ........264 ZV013A .............287
ZS107 .................18
B535268S ........264 ZV013B ............287
ZS108 .................19
B535272S ........264 ZV013D ............287
ZS109-L ..............18
B535276S ........264 ZV101 ..............509
ZS109-XL ............18
B535280S ........264
ZS109-2L ............18
B535284S ........264
ZS109-3L ............18
SC xxx ZS110 .................19
SC7083MR .......644 ZS111-M .............18
SC7096MR .......645 ZS111-L .............18
SC7010MR .......646 ZS111-XL ............18

Index 17
 Notes ......

Notes
KING TONY Tools Corporation
Gree Space for The Mind
The tall rich green grasses around us grow and give us
a sense of a fresh, free feeling, as the gentle winds blow.
As the tall grasses grow to reach the blue sky, so do
our desires, minds, and work to reach the highest quality
of service.

● KING TONY reserve the revising right to the listing product

in this catalogue for improving or technical reasons.

● All products listed in catalogues before this version are

null and void unless items confirming remain available
by KING TONY.

● Do not copy or extract any listing in the cataloque

without our approval.

Quality
Innovation
Health
Enjoyment
2018.01